usb: typec: tcpm: set correct data role for non-DRD

Since the typec port data role is separated from power role,
so check the port data capability when setting data role.

Signed-off-by: Li Jun <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

drivers/usb/typec/tcpm/tcpm.c

@@ -373,6 +373,14 @@ struct pd_rx_event {
 	((port)->try_src_count == 0 && (port)->try_role == TYPEC_SOURCE && \
 	(port)->port_type == TYPEC_PORT_DRP)
 
+#define tcpm_data_role_for_source(port) \
+	((port)->typec_caps.data == TYPEC_PORT_UFP ? \
+	TYPEC_DEVICE : TYPEC_HOST)
+
+#define tcpm_data_role_for_sink(port) \
+	((port)->typec_caps.data == TYPEC_PORT_DFP ? \
+	TYPEC_HOST : TYPEC_DEVICE)
+
 static enum tcpm_state tcpm_default_state(struct tcpm_port *port)
 {
 	if (port->port_type == TYPEC_PORT_DRP) {
@@ -788,10 +796,30 @@ static int tcpm_set_roles(struct tcpm_port *port, bool attached,
 	else
 		orientation = TYPEC_ORIENTATION_REVERSE;
 
-	if (data == TYPEC_HOST)
-		usb_role = USB_ROLE_HOST;
-	else
-		usb_role = USB_ROLE_DEVICE;
+	if (port->typec_caps.data == TYPEC_PORT_DRD) {
+		if (data == TYPEC_HOST)
+			usb_role = USB_ROLE_HOST;
+		else
+			usb_role = USB_ROLE_DEVICE;
+	} else if (port->typec_caps.data == TYPEC_PORT_DFP) {
+		if (data == TYPEC_HOST) {
+			if (role == TYPEC_SOURCE)
+				usb_role = USB_ROLE_HOST;
+			else
+				usb_role = USB_ROLE_NONE;
+		} else {
+			return -ENOTSUPP;
+		}
+	} else {
+		if (data == TYPEC_DEVICE) {
+			if (role == TYPEC_SINK)
+				usb_role = USB_ROLE_DEVICE;
+			else
+				usb_role = USB_ROLE_NONE;
+		} else {
+			return -ENOTSUPP;
+		}
+	}
 
 	ret = tcpm_mux_set(port, TYPEC_STATE_USB, usb_role, orientation);
 	if (ret < 0)
@@ -1817,7 +1845,7 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port,
 		tcpm_set_state(port, SOFT_RESET, 0);
 		break;
 	case PD_CTRL_DR_SWAP:
-		if (port->port_type != TYPEC_PORT_DRP) {
+		if (port->typec_caps.data != TYPEC_PORT_DRD) {
 			tcpm_queue_message(port, PD_MSG_CTRL_REJECT);
 			break;
 		}
@@ -2618,7 +2646,8 @@ static int tcpm_src_attach(struct tcpm_port *port)
 	if (ret < 0)
 		return ret;
 
-	ret = tcpm_set_roles(port, true, TYPEC_SOURCE, TYPEC_HOST);
+	ret = tcpm_set_roles(port, true, TYPEC_SOURCE,
+			     tcpm_data_role_for_source(port));
 	if (ret < 0)
 		return ret;
 
@@ -2740,7 +2769,8 @@ static int tcpm_snk_attach(struct tcpm_port *port)
 	if (ret < 0)
 		return ret;
 
-	ret = tcpm_set_roles(port, true, TYPEC_SINK, TYPEC_DEVICE);
+	ret = tcpm_set_roles(port, true, TYPEC_SINK,
+			     tcpm_data_role_for_sink(port));
 	if (ret < 0)
 		return ret;
 
@@ -2766,7 +2796,8 @@ static int tcpm_acc_attach(struct tcpm_port *port)
 	if (port->attached)
 		return 0;
 
-	ret = tcpm_set_roles(port, true, TYPEC_SOURCE, TYPEC_HOST);
+	ret = tcpm_set_roles(port, true, TYPEC_SOURCE,
+			     tcpm_data_role_for_source(port));
 	if (ret < 0)
 		return ret;
 
@@ -3293,7 +3324,7 @@ static void run_state_machine(struct tcpm_port *port)
 		tcpm_set_vconn(port, true);
 		tcpm_set_vbus(port, false);
 		tcpm_set_roles(port, port->self_powered, TYPEC_SOURCE,
-			       TYPEC_HOST);
+			       tcpm_data_role_for_source(port));
 		tcpm_set_state(port, SRC_HARD_RESET_VBUS_ON, PD_T_SRC_RECOVER);
 		break;
 	case SRC_HARD_RESET_VBUS_ON:
@@ -3308,7 +3339,7 @@ static void run_state_machine(struct tcpm_port *port)
 		if (port->pd_capable)
 			tcpm_set_charge(port, false);
 		tcpm_set_roles(port, port->self_powered, TYPEC_SINK,
-			       TYPEC_DEVICE);
+			       tcpm_data_role_for_sink(port));
 		/*
 		 * VBUS may or may not toggle, depending on the adapter.
 		 * If it doesn't toggle, transition to SNK_HARD_RESET_SINK_ON
@@ -3969,7 +4000,7 @@ static int tcpm_dr_set(struct typec_port *p, enum typec_data_role data)
 	mutex_lock(&port->swap_lock);
 	mutex_lock(&port->lock);
 
-	if (port->port_type != TYPEC_PORT_DRP) {
+	if (port->typec_caps.data != TYPEC_PORT_DRD) {
 		ret = -EINVAL;
 		goto port_unlock;
 	}