Full support for Arilux AL-LC02

[xoseperez]

Originally reported by: Crispin (Bitbucket: CrispinP, GitHub: CrispinP)

---

Full support for the Arilux AL-LC02 RGBW from Banggood would be a great way.
Happy to offer help or a donar one for work.

[xoseperez]

Really kind, but I just need to know the GPIO configuration. According to https://github.com/mertenats/Arilux_AL-LC0X they should be:

#if defined(RGBWW)
#define ARILUX_RED_PIN            5
#define ARILUX_GREEN_PIN          4
#define ARILUX_BLUE_PIN           14
#define ARILUX_WHITE1_PIN         12
#define ARILUX_WHITE2_PIN         13
#define ARILUX_COLOR_STRING       "RGBWW"
#elif defined(RGBW)
#define ARILUX_RED_PIN            5
#define ARILUX_GREEN_PIN          14
#define ARILUX_BLUE_PIN           12
#define ARILUX_WHITE1_PIN         13
#define ARILUX_COLOR_STRING       "RGBW"
#else
#define ARILUX_RED_PIN            14
#define ARILUX_GREEN_PIN          5
#define ARILUX_BLUE_PIN           12
#define ARILUX_COLOR_STRING       "RGB"
#endif

The AL-LC02 is RGBW so GPIOs should be 5, 14, 12, 13. You can try changing that in the ARILUX_AL_LC01 definition wich is also RGBW but with slightly different GPIO definition and test.

[xoseperez]

Original comment by Crispin (Bitbucket: CrispinP, GitHub: CrispinP):

---

Cool. I got the code compiling at home. When back I'll change them and see.

[xoseperez]

Original comment by Crispin (Bitbucket: CrispinP, GitHub: CrispinP):

---

So having a few problems getting this to compile.

It builds and then errors with

#!arduino
WebHandlers.cpp:68:64: error: 'strftime' was not declared in this scope

I cannot see that I am using the "wrong" library as per the google suggestions.
Is there anything special in your code which might cause this?

thanks.

[xoseperez]

Pushed your code to the dev branch (7f70d6f).

[xoseperez]

Released with 1.11.4

[xoseperez]

Removing milestone: 1.11.4 (automated comment)