You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Looking in indexes: https://pypi.org/simple, https://pypi.ngc.nvidia.com
Obtaining file:///home/cser/jason2.li/LLCompiler
Preparing metadata (setup.py) ... done
Requirement already satisfied: xdsl in /usr/local/lib/python3.10/dist-packages (from llcompiler==0.0.1) (0.28.0)
Requirement already satisfied: onnx in /usr/local/lib/python3.10/dist-packages (from llcompiler==0.0.1) (1.16.0)
Requirement already satisfied: numpy>=1.20 in /usr/local/lib/python3.10/dist-packages (from onnx->llcompiler==0.0.1) (1.26.4)
Requirement already satisfied: protobuf>=3.20.2 in /usr/local/lib/python3.10/dist-packages (from onnx->llcompiler==0.0.1) (4.24.4)
Requirement already satisfied: immutabledict<4.2.2 in /usr/local/lib/python3.10/dist-packages (from xdsl->llcompiler==0.0.1) (4.2.0)
Requirement already satisfied: typing-extensions<4.13,>=4.7 in /usr/local/lib/python3.10/dist-packages (from xdsl->llcompiler==0.0.1) (4.12.0)
Requirement already satisfied: ordered-set==4.1.0 in /usr/local/lib/python3.10/dist-packages (from xdsl->llcompiler==0.0.1) (4.1.0)
Installing collected packages: llcompiler
DEPRECATION: Legacy editable install of llcompiler==0.0.1 from file:///home/cser/jason2.li/LLCompiler (setup.py develop) is deprecated. pip 25.1 will enforce this behaviour change. A possible replacement is to add a pyproject.toml or enable --use-pep517, and use setuptools >= 64. If the resulting installation is not behaving as expected, try using --config-settings editable_mode=compat. Please consult the setuptools documentation for more information. Discussion can be found at pypa/pip#11457
Running setup.py develop for llcompiler
error: subprocess-exited-with-error
× python setup.py develop did not run successfully.
│ exit code: 1
╰─> [293 lines of output]
running develop
/usr/local/lib/python3.10/dist-packages/setuptools/command/develop.py:41: EasyInstallDeprecationWarning: easy_install command is deprecated.
!!
********************************************************************************
Please avoid running ``setup.py`` and ``easy_install``.
Instead, use pypa/build, pypa/installer or other
standards-based tools.
See https://github.com/pypa/setuptools/issues/917 for details.
********************************************************************************
!!
easy_install.initialize_options(self)
/usr/local/lib/python3.10/dist-packages/setuptools/_distutils/cmd.py:79: SetuptoolsDeprecationWarning: setup.py install is deprecated.
!!
********************************************************************************
Please avoid running ``setup.py`` directly.
Instead, use pypa/build, pypa/installer or other
standards-based tools.
See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details.
********************************************************************************
!!
self.initialize_options()
running egg_info
writing llcompiler.egg-info/PKG-INFO
writing dependency_links to llcompiler.egg-info/dependency_links.txt
writing requirements to llcompiler.egg-info/requires.txt
writing top-level names to llcompiler.egg-info/top_level.txt
reading manifest file 'llcompiler.egg-info/SOURCES.txt'
adding license file 'LICENSE'
writing manifest file 'llcompiler.egg-info/SOURCES.txt'
running build_ext
running cmake_build
******************************************
************* build googletest ***************
******************************************
******************************************
************* build spdlog ***************
******************************************
-- Build spdlog: 1.15.1
-- Build type: Release
-- Generating install
******************************************
************* build llvm *****************
******************************************
CMake Deprecation Warning at third_party/llvm-project/cmake/Modules/CMakePolicy.cmake:6 (cmake_policy):
The OLD behavior for policy CMP0116 will be removed from a future version
of CMake.
The cmake-policies(7) manual explains that the OLD behaviors of all
policies are deprecated and that a policy should be set to OLD only under
specific short-term circumstances. Projects should be ported to the NEW
behavior and not rely on setting a policy to OLD.
Call Stack (most recent call first):
third_party/llvm-project/llvm/CMakeLists.txt:8 (include)
-- bolt project is disabled
-- clang project is enabled
-- clang-tools-extra project is disabled
-- compiler-rt project is disabled
-- cross-project-tests project is disabled
-- libc project is disabled
-- libclc project is disabled
-- lld project is disabled
-- lldb project is disabled
-- mlir project is enabled
-- openmp project is disabled
-- polly project is disabled
-- pstl project is disabled
-- flang project is disabled
-- Could NOT find LibXml2 (missing: LIBXML2_LIBRARY LIBXML2_INCLUDE_DIR)
-- LLVM host triple: x86_64-unknown-linux-gnu
-- Native target architecture is X86
-- Threads enabled.
-- Doxygen disabled.
-- Ninja version: 1.11.1.git.kitware.jobserver-1
-- Could NOT find OCaml (missing: OCAMLFIND OCAML_VERSION OCAML_STDLIB_PATH)
-- Could NOT find OCaml (missing: OCAMLFIND OCAML_VERSION OCAML_STDLIB_PATH)
-- OCaml bindings disabled.
-- LLVM default target triple: x86_64-unknown-linux-gnu
-- Building with -fPIC
-- Targeting ARM
-- Targeting AVR
-- Targeting BPF
-- Targeting Hexagon
-- Targeting Lanai
-- Targeting LoongArch
-- Targeting Mips
-- Targeting MSP430
-- Targeting NVPTX
-- Targeting PowerPC
-- Targeting RISCV
-- Targeting SystemZ
-- Targeting VE
-- Targeting WebAssembly
-- Targeting X86
-- Targeting XCore
CMake Deprecation Warning at third_party/llvm-project/cmake/Modules/CMakePolicy.cmake:6 (cmake_policy):
The OLD behavior for policy CMP0116 will be removed from a future version
of CMake.
The cmake-policies(7) manual explains that the OLD behaviors of all
policies are deprecated and that a policy should be set to OLD only under
specific short-term circumstances. Projects should be ported to the NEW
behavior and not rely on setting a policy to OLD.
Call Stack (most recent call first):
third_party/llvm-project/mlir/CMakeLists.txt:8 (include)
CMake Deprecation Warning at third_party/llvm-project/cmake/Modules/CMakePolicy.cmake:6 (cmake_policy):
The OLD behavior for policy CMP0116 will be removed from a future version
of CMake.
The cmake-policies(7) manual explains that the OLD behaviors of all
policies are deprecated and that a policy should be set to OLD only under
specific short-term circumstances. Projects should be ported to the NEW
behavior and not rely on setting a policy to OLD.
Call Stack (most recent call first):
third_party/llvm-project/clang/CMakeLists.txt:7 (include)
-- Clang version: 21.0.0git
-- Registering ExampleIRTransforms as a pass plugin (static build: OFF)
-- Registering Bye as a pass plugin (static build: OFF)
******************************************
************* build pybind11 *****************
******************************************
-- pybind11 v2.14.0 dev1
******************************************
************* build stablehlo ***************
******************************************
/home/cser/jason2.li/LLCompiler/lib/cmake/mlir/home/cser/jason2.li/LLCompiler/build/lib/cmake/mlir
/home/cser/jason2.li/LLCompiler/third_party/llvm-project/llvm/lib/cmake/llvm/home/cser/jason2.li/LLCompiler/build/third_party/llvm-project/llvm/lib/cmake/llvm
CMake Deprecation Warning at third_party/stablehlo/CMakeLists.txt:34 (cmake_policy):
The OLD behavior for policy CMP0116 will be removed from a future version
of CMake.
The cmake-policies(7) manual explains that the OLD behaviors of all
policies are deprecated and that a policy should be set to OLD only under
specific short-term circumstances. Projects should be ported to the NEW
behavior and not rely on setting a policy to OLD.
-- Building StableHLO as an external LLVM project
CMake Error at build/lib/cmake/mlir/AddMLIR.cmake:265 (message):
StablehloTypeConversion specifies LINK_LIBS LLVMSupport, but LINK_LIBS
cannot be used for LLVM libraries. Please use LINK_COMPONENTS instead.
Call Stack (most recent call first):
build/lib/cmake/mlir/AddMLIR.cmake:377 (_check_llvm_components_usage)
third_party/stablehlo/stablehlo/transforms/conversions/CMakeLists.txt:16 (add_mlir_library)
******************************************
************* build symengine ***************
******************************************
-- Linker supports --exclude-libs
--------------------------------------------------------------------------------
+-------------------------------+
| Configuration results SUMMARY |
+-------------------------------+
CMAKE_C_COMPILER: /usr/bin/cc
CMAKE_CXX_COMPILER: /usr/bin/c++
CMAKE_BUILD_TYPE: Release
CMAKE_CONFIGURATION_TYPES:
CMAKE_C_FLAGS:
CMAKE_CXX_FLAGS: -std=c++11 -fPIC
CMAKE_CXX_FLAGS_DEBUG: -g -Wno-unknown-pragmas
CMAKE_CXX_FLAGS_RELEASE: -O3 -DNDEBUG -Wno-unknown-pragmas
CMAKE_INSTALL_PREFIX: /home/cser/jason2.li/LLCompiler/install
BUILD_SHARED_LIBS: ON
INTEGER_CLASS : GMP
HAVE_SYMENGINE_GMP: yes
WITH_SYMENGINE_ASSERT: yes
WITH_SYMENGINE_RCP: yes
WITH_SYMENGINE_TEUCHOS: no
WITH_COTIRE: no
WITH_GENERATE_PARSER: no
HAVE_GCC_ABI_DEMANGLE: yes
HAVE_C_FUNCTION_NOT_FUNC: no
HAVE_DEFAULT_CONSTRUCTORS: yes
HAVE_SYMENGINE_NOEXCEPT: yes
HAVE_SYMENGINE_IS_CONSTRUCTIBLE: yes
HAVE_SYMENGINE_RESERVE: yes
HAVE_SYMENGINE_STD_TO_STRING: TRUE
WITH_SYMENGINE_THREAD_SAFE: res
BUILD_TESTS: no
BUILD_BENCHMARKS: yes
BUILD_BENCHMARKS_GOOGLE: no
WITH_GMP: yes
GMP_INCLUDE_DIRS: /usr/include/x86_64-linux-gnu
GMP_LIBRARIES: /usr/lib/x86_64-linux-gnu/libgmp.so
WITH_BFD: no
WITH_ECM: no
WITH_PRIMESIEVE: no
WITH_FLINT: no
WITH_ARB: no
WITH_MPFR: no
WITH_PIRANHA: no
WITH_LLVM: no
WITH_BOOST: no
WITH_PTHREAD: no
WITH_MPC: no
WITH_TCMALLOC: no
WITH_OPENMP: no
WITH_VIRTUAL_TYPEID: no
WITH_SYSTEM_CEREAL: no
WITH_SYSTEM_FASTFLOAT: no
LIBS: gmp
--------------------------------------------------------------------------------
add SHARED lib: LLCSupport.
add SHARED lib: LLCFrontendCore.
add SHARED lib: MLIRSymbolShapeOpInterfaces.
add SHARED lib: MLIRBraodcastableOpInterfaces.
add SHARED lib: LLCLLHDialect.
add SHARED lib: LLCLLHTransforms.
add SHARED lib: LLCLLHUtils.
add SHARED lib: LLCSymbolInferTransforms.
add SHARED lib: LLCMLIRUtility.
add SHARED lib: LLCPatternRewriter.
add SHARED lib: LLCIndexExtensionTransforms.
add SHARED lib: LLCLLVMExtensionTransforms.
add SHARED lib: LLCBufferizationExtensionTransforms.
add SHARED lib: LLCLLHToTosa.
add SHARED lib: LLCLLHToArith.
add SHARED lib: LLCLLHToTensor.
add SHARED lib: LLCLLHToHLO.
add SHARED lib: LLCLLHToShape.
add SHARED lib: MLIRTosaToLinalgExtension.
add SHARED lib: LLCStablehlotoLinalgExtension.
add SHARED lib: LLCLLHToMath.
add SHARED lib: LLCPipelines.
add SHARED lib: LLCompiler.
add executable: llc-opt.
add executable: llc-translate.
-- Could NOT find LibXml2 (missing: LIBXML2_LIBRARY LIBXML2_INCLUDE_DIR)
-- Could NOT find LibXml2 (missing: LIBXML2_LIBRARY LIBXML2_INCLUDE_DIR)
-- Building with -fPIC
-- BUILD_SHARED_LIBS:ON
-- STATIC_WINDOWS_RUNTIME:OFF
-- CMAKE_EXPORT_COMPILE_COMMANDS:ON
-- BUILD_LLCOMPILER_LOG:ON
-- CMAKE_INSTALL_PREFIX:/home/cser/jason2.li/LLCompiler/install
add executable: main.
-- Configuring incomplete, errors occurred!
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "/home/cser/jason2.li/LLCompiler/setup.py", line 177, in <module>
setuptools.setup(
File "/usr/local/lib/python3.10/dist-packages/setuptools/__init__.py", line 117, in setup
return distutils.core.setup(**attrs)
File "/usr/local/lib/python3.10/dist-packages/setuptools/_distutils/core.py", line 186, in setup
return run_commands(dist)
File "/usr/local/lib/python3.10/dist-packages/setuptools/_distutils/core.py", line 202, in run_commands
dist.run_commands()
File "/usr/local/lib/python3.10/dist-packages/setuptools/_distutils/dist.py", line 983, in run_commands
self.run_command(cmd)
File "/usr/local/lib/python3.10/dist-packages/setuptools/dist.py", line 999, in run_command
super().run_command(command)
File "/usr/local/lib/python3.10/dist-packages/setuptools/_distutils/dist.py", line 1002, in run_command
cmd_obj.run()
File "/usr/local/lib/python3.10/dist-packages/setuptools/command/develop.py", line 35, in run
self.install_for_development()
File "/usr/local/lib/python3.10/dist-packages/setuptools/command/develop.py", line 112, in install_for_development
self.run_command('build_ext')
File "/usr/local/lib/python3.10/dist-packages/setuptools/_distutils/cmd.py", line 339, in run_command
self.distribution.run_command(command)
File "/usr/local/lib/python3.10/dist-packages/setuptools/dist.py", line 999, in run_command
super().run_command(command)
File "/usr/local/lib/python3.10/dist-packages/setuptools/_distutils/dist.py", line 1002, in run_command
cmd_obj.run()
File "/home/cser/jason2.li/LLCompiler/setup.py", line 149, in run
self.run_command("cmake_build")
File "/usr/local/lib/python3.10/dist-packages/setuptools/_distutils/cmd.py", line 339, in run_command
self.distribution.run_command(command)
File "/usr/local/lib/python3.10/dist-packages/setuptools/dist.py", line 999, in run_command
super().run_command(command)
File "/usr/local/lib/python3.10/dist-packages/setuptools/_distutils/dist.py", line 1002, in run_command
cmd_obj.run()
File "/home/cser/jason2.li/LLCompiler/setup.py", line 128, in run
subprocess.check_call(cmake_args)
File "/usr/lib/python3.10/subprocess.py", line 369, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['/usr/local/bin/cmake', '-G Ninja', '-DCMAKE_INSTALL_PREFIX=/home/cser/jason2.li/LLCompiler/install', '-DCMAKE_BUILD_TYPE=Release', '-DBUILD_SHARED_LIBS=ON', '-DBUILD_LLCOMPILER_TEST=OFF', '-DSTATIC_WINDOWS_RUNTIME=ON', '-DBUILD_LLCOMPILER_DOCS=ON', '-DBUILD_LLCOMPILER_LOG=ON', '-DCMAKE_EXPORT_COMPILE_COMMANDS=ON', '-DLLCOMPILER_BUILD_WARNINGS=ON', '-DDEVELOPER_MODE=OFF', '/home/cser/jason2.li/LLCompiler']' returned non-zero exit status 1.
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error
× python setup.py develop did not run successfully.
│ exit code: 1
╰─> [293 lines of output]
running develop
/usr/local/lib/python3.10/dist-packages/setuptools/command/develop.py:41: EasyInstallDeprecationWarning: easy_install command is deprecated.
!!
********************************************************************************
Please avoid running ``setup.py`` and ``easy_install``.
Instead, use pypa/build, pypa/installer or other
standards-based tools.
See https://github.com/pypa/setuptools/issues/917 for details.
********************************************************************************
!!
easy_install.initialize_options(self)
/usr/local/lib/python3.10/dist-packages/setuptools/_distutils/cmd.py:79: SetuptoolsDeprecationWarning: setup.py install is deprecated.
!!
********************************************************************************
Please avoid running ``setup.py`` directly.
Instead, use pypa/build, pypa/installer or other
standards-based tools.
See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details.
********************************************************************************
!!
self.initialize_options()
running egg_info
writing llcompiler.egg-info/PKG-INFO
writing dependency_links to llcompiler.egg-info/dependency_links.txt
writing requirements to llcompiler.egg-info/requires.txt
writing top-level names to llcompiler.egg-info/top_level.txt
reading manifest file 'llcompiler.egg-info/SOURCES.txt'
adding license file 'LICENSE'
writing manifest file 'llcompiler.egg-info/SOURCES.txt'
running build_ext
running cmake_build
******************************************
************* build googletest ***************
******************************************
******************************************
************* build spdlog ***************
******************************************
-- Build spdlog: 1.15.1
-- Build type: Release
-- Generating install
******************************************
************* build llvm *****************
******************************************
CMake Deprecation Warning at third_party/llvm-project/cmake/Modules/CMakePolicy.cmake:6 (cmake_policy):
The OLD behavior for policy CMP0116 will be removed from a future version
of CMake.
The cmake-policies(7) manual explains that the OLD behaviors of all
policies are deprecated and that a policy should be set to OLD only under
specific short-term circumstances. Projects should be ported to the NEW
behavior and not rely on setting a policy to OLD.
Call Stack (most recent call first):
third_party/llvm-project/llvm/CMakeLists.txt:8 (include)
-- bolt project is disabled
-- clang project is enabled
-- clang-tools-extra project is disabled
-- compiler-rt project is disabled
-- cross-project-tests project is disabled
-- libc project is disabled
-- libclc project is disabled
-- lld project is disabled
-- lldb project is disabled
-- mlir project is enabled
-- openmp project is disabled
-- polly project is disabled
-- pstl project is disabled
-- flang project is disabled
-- Could NOT find LibXml2 (missing: LIBXML2_LIBRARY LIBXML2_INCLUDE_DIR)
-- LLVM host triple: x86_64-unknown-linux-gnu
-- Native target architecture is X86
-- Threads enabled.
-- Doxygen disabled.
-- Ninja version: 1.11.1.git.kitware.jobserver-1
-- Could NOT find OCaml (missing: OCAMLFIND OCAML_VERSION OCAML_STDLIB_PATH)
-- Could NOT find OCaml (missing: OCAMLFIND OCAML_VERSION OCAML_STDLIB_PATH)
-- OCaml bindings disabled.
-- LLVM default target triple: x86_64-unknown-linux-gnu
-- Building with -fPIC
-- Targeting ARM
-- Targeting AVR
-- Targeting BPF
-- Targeting Hexagon
-- Targeting Lanai
-- Targeting LoongArch
-- Targeting Mips
-- Targeting MSP430
-- Targeting NVPTX
-- Targeting PowerPC
-- Targeting RISCV
-- Targeting SystemZ
-- Targeting VE
-- Targeting WebAssembly
-- Targeting X86
-- Targeting XCore
CMake Deprecation Warning at third_party/llvm-project/cmake/Modules/CMakePolicy.cmake:6 (cmake_policy):
The OLD behavior for policy CMP0116 will be removed from a future version
of CMake.
The cmake-policies(7) manual explains that the OLD behaviors of all
policies are deprecated and that a policy should be set to OLD only under
specific short-term circumstances. Projects should be ported to the NEW
behavior and not rely on setting a policy to OLD.
Call Stack (most recent call first):
third_party/llvm-project/mlir/CMakeLists.txt:8 (include)
CMake Deprecation Warning at third_party/llvm-project/cmake/Modules/CMakePolicy.cmake:6 (cmake_policy):
The OLD behavior for policy CMP0116 will be removed from a future version
of CMake.
The cmake-policies(7) manual explains that the OLD behaviors of all
policies are deprecated and that a policy should be set to OLD only under
specific short-term circumstances. Projects should be ported to the NEW
behavior and not rely on setting a policy to OLD.
Call Stack (most recent call first):
third_party/llvm-project/clang/CMakeLists.txt:7 (include)
-- Clang version: 21.0.0git
-- Registering ExampleIRTransforms as a pass plugin (static build: OFF)
-- Registering Bye as a pass plugin (static build: OFF)
******************************************
************* build pybind11 *****************
******************************************
-- pybind11 v2.14.0 dev1
******************************************
************* build stablehlo ***************
******************************************
/home/cser/jason2.li/LLCompiler/lib/cmake/mlir/home/cser/jason2.li/LLCompiler/build/lib/cmake/mlir
/home/cser/jason2.li/LLCompiler/third_party/llvm-project/llvm/lib/cmake/llvm/home/cser/jason2.li/LLCompiler/build/third_party/llvm-project/llvm/lib/cmake/llvm
CMake Deprecation Warning at third_party/stablehlo/CMakeLists.txt:34 (cmake_policy):
The OLD behavior for policy CMP0116 will be removed from a future version
of CMake.
The cmake-policies(7) manual explains that the OLD behaviors of all
policies are deprecated and that a policy should be set to OLD only under
specific short-term circumstances. Projects should be ported to the NEW
behavior and not rely on setting a policy to OLD.
-- Building StableHLO as an external LLVM project
CMake Error at build/lib/cmake/mlir/AddMLIR.cmake:265 (message):
StablehloTypeConversion specifies LINK_LIBS LLVMSupport, but LINK_LIBS
cannot be used for LLVM libraries. Please use LINK_COMPONENTS instead.
Call Stack (most recent call first):
build/lib/cmake/mlir/AddMLIR.cmake:377 (_check_llvm_components_usage)
third_party/stablehlo/stablehlo/transforms/conversions/CMakeLists.txt:16 (add_mlir_library)
******************************************
************* build symengine ***************
******************************************
-- Linker supports --exclude-libs
--------------------------------------------------------------------------------
+-------------------------------+
| Configuration results SUMMARY |
+-------------------------------+
CMAKE_C_COMPILER: /usr/bin/cc
CMAKE_CXX_COMPILER: /usr/bin/c++
CMAKE_BUILD_TYPE: Release
CMAKE_CONFIGURATION_TYPES:
CMAKE_C_FLAGS:
CMAKE_CXX_FLAGS: -std=c++11 -fPIC
CMAKE_CXX_FLAGS_DEBUG: -g -Wno-unknown-pragmas
CMAKE_CXX_FLAGS_RELEASE: -O3 -DNDEBUG -Wno-unknown-pragmas
CMAKE_INSTALL_PREFIX: /home/cser/jason2.li/LLCompiler/install
BUILD_SHARED_LIBS: ON
INTEGER_CLASS : GMP
HAVE_SYMENGINE_GMP: yes
WITH_SYMENGINE_ASSERT: yes
WITH_SYMENGINE_RCP: yes
WITH_SYMENGINE_TEUCHOS: no
WITH_COTIRE: no
WITH_GENERATE_PARSER: no
HAVE_GCC_ABI_DEMANGLE: yes
HAVE_C_FUNCTION_NOT_FUNC: no
HAVE_DEFAULT_CONSTRUCTORS: yes
HAVE_SYMENGINE_NOEXCEPT: yes
HAVE_SYMENGINE_IS_CONSTRUCTIBLE: yes
HAVE_SYMENGINE_RESERVE: yes
HAVE_SYMENGINE_STD_TO_STRING: TRUE
WITH_SYMENGINE_THREAD_SAFE: res
BUILD_TESTS: no
BUILD_BENCHMARKS: yes
BUILD_BENCHMARKS_GOOGLE: no
WITH_GMP: yes
GMP_INCLUDE_DIRS: /usr/include/x86_64-linux-gnu
GMP_LIBRARIES: /usr/lib/x86_64-linux-gnu/libgmp.so
WITH_BFD: no
WITH_ECM: no
WITH_PRIMESIEVE: no
WITH_FLINT: no
WITH_ARB: no
WITH_MPFR: no
WITH_PIRANHA: no
WITH_LLVM: no
WITH_BOOST: no
WITH_PTHREAD: no
WITH_MPC: no
WITH_TCMALLOC: no
WITH_OPENMP: no
WITH_VIRTUAL_TYPEID: no
WITH_SYSTEM_CEREAL: no
WITH_SYSTEM_FASTFLOAT: no
LIBS: gmp
--------------------------------------------------------------------------------
add SHARED lib: LLCSupport.
add SHARED lib: LLCFrontendCore.
add SHARED lib: MLIRSymbolShapeOpInterfaces.
add SHARED lib: MLIRBraodcastableOpInterfaces.
add SHARED lib: LLCLLHDialect.
add SHARED lib: LLCLLHTransforms.
add SHARED lib: LLCLLHUtils.
add SHARED lib: LLCSymbolInferTransforms.
add SHARED lib: LLCMLIRUtility.
add SHARED lib: LLCPatternRewriter.
add SHARED lib: LLCIndexExtensionTransforms.
add SHARED lib: LLCLLVMExtensionTransforms.
add SHARED lib: LLCBufferizationExtensionTransforms.
add SHARED lib: LLCLLHToTosa.
add SHARED lib: LLCLLHToArith.
add SHARED lib: LLCLLHToTensor.
add SHARED lib: LLCLLHToHLO.
add SHARED lib: LLCLLHToShape.
add SHARED lib: MLIRTosaToLinalgExtension.
add SHARED lib: LLCStablehlotoLinalgExtension.
add SHARED lib: LLCLLHToMath.
add SHARED lib: LLCPipelines.
add SHARED lib: LLCompiler.
add executable: llc-opt.
add executable: llc-translate.
-- Could NOT find LibXml2 (missing: LIBXML2_LIBRARY LIBXML2_INCLUDE_DIR)
-- Could NOT find LibXml2 (missing: LIBXML2_LIBRARY LIBXML2_INCLUDE_DIR)
-- Building with -fPIC
-- BUILD_SHARED_LIBS:ON
-- STATIC_WINDOWS_RUNTIME:OFF
-- CMAKE_EXPORT_COMPILE_COMMANDS:ON
-- BUILD_LLCOMPILER_LOG:ON
-- CMAKE_INSTALL_PREFIX:/home/cser/jason2.li/LLCompiler/install
add executable: main.
-- Configuring incomplete, errors occurred!
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "/home/cser/jason2.li/LLCompiler/setup.py", line 177, in <module>
setuptools.setup(
File "/usr/local/lib/python3.10/dist-packages/setuptools/__init__.py", line 117, in setup
return distutils.core.setup(**attrs)
File "/usr/local/lib/python3.10/dist-packages/setuptools/_distutils/core.py", line 186, in setup
return run_commands(dist)
File "/usr/local/lib/python3.10/dist-packages/setuptools/_distutils/core.py", line 202, in run_commands
dist.run_commands()
File "/usr/local/lib/python3.10/dist-packages/setuptools/_distutils/dist.py", line 983, in run_commands
self.run_command(cmd)
File "/usr/local/lib/python3.10/dist-packages/setuptools/dist.py", line 999, in run_command
super().run_command(command)
File "/usr/local/lib/python3.10/dist-packages/setuptools/_distutils/dist.py", line 1002, in run_command
cmd_obj.run()
File "/usr/local/lib/python3.10/dist-packages/setuptools/command/develop.py", line 35, in run
self.install_for_development()
File "/usr/local/lib/python3.10/dist-packages/setuptools/command/develop.py", line 112, in install_for_development
self.run_command('build_ext')
File "/usr/local/lib/python3.10/dist-packages/setuptools/_distutils/cmd.py", line 339, in run_command
self.distribution.run_command(command)
File "/usr/local/lib/python3.10/dist-packages/setuptools/dist.py", line 999, in run_command
super().run_command(command)
File "/usr/local/lib/python3.10/dist-packages/setuptools/_distutils/dist.py", line 1002, in run_command
cmd_obj.run()
File "/home/cser/jason2.li/LLCompiler/setup.py", line 149, in run
self.run_command("cmake_build")
File "/usr/local/lib/python3.10/dist-packages/setuptools/_distutils/cmd.py", line 339, in run_command
self.distribution.run_command(command)
File "/usr/local/lib/python3.10/dist-packages/setuptools/dist.py", line 999, in run_command
super().run_command(command)
File "/usr/local/lib/python3.10/dist-packages/setuptools/_distutils/dist.py", line 1002, in run_command
cmd_obj.run()
File "/home/cser/jason2.li/LLCompiler/setup.py", line 128, in run
subprocess.check_call(cmake_args)
File "/usr/lib/python3.10/subprocess.py", line 369, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['/usr/local/bin/cmake', '-G Ninja', '-DCMAKE_INSTALL_PREFIX=/home/cser/jason2.li/LLCompiler/install', '-DCMAKE_BUILD_TYPE=Release', '-DBUILD_SHARED_LIBS=ON', '-DBUILD_LLCOMPILER_TEST=OFF', '-DSTATIC_WINDOWS_RUNTIME=ON', '-DBUILD_LLCOMPILER_DOCS=ON', '-DBUILD_LLCOMPILER_LOG=ON', '-DCMAKE_EXPORT_COMPILE_COMMANDS=ON', '-DLLCOMPILER_BUILD_WARNINGS=ON', '-DDEVELOPER_MODE=OFF', '/home/cser/jason2.li/LLCompiler']' returned non-zero exit status 1.
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
The text was updated successfully, but these errors were encountered:
hi,
在 build 的时候有这个报错,请问一下是否了解哪里有问题么
Looking in indexes: https://pypi.org/simple, https://pypi.ngc.nvidia.com
Obtaining file:///home/cser/jason2.li/LLCompiler
Preparing metadata (setup.py) ... done
Requirement already satisfied: xdsl in /usr/local/lib/python3.10/dist-packages (from llcompiler==0.0.1) (0.28.0)
Requirement already satisfied: onnx in /usr/local/lib/python3.10/dist-packages (from llcompiler==0.0.1) (1.16.0)
Requirement already satisfied: numpy>=1.20 in /usr/local/lib/python3.10/dist-packages (from onnx->llcompiler==0.0.1) (1.26.4)
Requirement already satisfied: protobuf>=3.20.2 in /usr/local/lib/python3.10/dist-packages (from onnx->llcompiler==0.0.1) (4.24.4)
Requirement already satisfied: immutabledict<4.2.2 in /usr/local/lib/python3.10/dist-packages (from xdsl->llcompiler==0.0.1) (4.2.0)
Requirement already satisfied: typing-extensions<4.13,>=4.7 in /usr/local/lib/python3.10/dist-packages (from xdsl->llcompiler==0.0.1) (4.12.0)
Requirement already satisfied: ordered-set==4.1.0 in /usr/local/lib/python3.10/dist-packages (from xdsl->llcompiler==0.0.1) (4.1.0)
Installing collected packages: llcompiler
DEPRECATION: Legacy editable install of llcompiler==0.0.1 from file:///home/cser/jason2.li/LLCompiler (setup.py develop) is deprecated. pip 25.1 will enforce this behaviour change. A possible replacement is to add a pyproject.toml or enable --use-pep517, and use setuptools >= 64. If the resulting installation is not behaving as expected, try using --config-settings editable_mode=compat. Please consult the setuptools documentation for more information. Discussion can be found at pypa/pip#11457
Running setup.py develop for llcompiler
error: subprocess-exited-with-error
error: subprocess-exited-with-error
× python setup.py develop did not run successfully.
│ exit code: 1
╰─> [293 lines of output]
running develop
/usr/local/lib/python3.10/dist-packages/setuptools/command/develop.py:41: EasyInstallDeprecationWarning: easy_install command is deprecated.
!!
note: This error originates from a subprocess, and is likely not a problem with pip.
The text was updated successfully, but these errors were encountered: