datatypes.h

/*
	Copyright 2016 - 2019 Benjamin Vedder	benjamin@vedder.se

	This file is part of the VESC firmware.

	The VESC firmware is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    The VESC firmware is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.
    */

#ifndef DATATYPES_H_
#define DATATYPES_H_

#include <stdint.h>
#include <stdbool.h>
#include "ch.h"

// Data types
typedef enum {
   MC_STATE_OFF = 0,
   MC_STATE_DETECTING,
   MC_STATE_RUNNING,
   MC_STATE_FULL_BRAKE,
} mc_state;

typedef enum {
	PWM_MODE_NONSYNCHRONOUS_HISW = 0, // This mode is not recommended
	PWM_MODE_SYNCHRONOUS, // The recommended and most tested mode
	PWM_MODE_BIPOLAR // Some glitches occasionally, can kill MOSFETs
} mc_pwm_mode;

typedef enum {
	COMM_MODE_INTEGRATE = 0,
	COMM_MODE_DELAY
} mc_comm_mode;

typedef enum {
	SENSOR_MODE_SENSORLESS = 0,
	SENSOR_MODE_SENSORED,
	SENSOR_MODE_HYBRID
} mc_sensor_mode;

typedef enum {
	FOC_SENSOR_MODE_SENSORLESS = 0,
	FOC_SENSOR_MODE_ENCODER,
	FOC_SENSOR_MODE_HALL,
	FOC_SENSOR_MODE_HFI
} mc_foc_sensor_mode;

// Auxiliary output mode
typedef enum {
	OUT_AUX_MODE_OFF = 0,
	OUT_AUX_MODE_ON_AFTER_2S,
	OUT_AUX_MODE_ON_AFTER_5S,
	OUT_AUX_MODE_ON_AFTER_10S,
	OUT_AUX_MODE_UNUSED
} out_aux_mode;

// Temperature sensor type
typedef enum {
	TEMP_SENSOR_NTC_10K_25C = 0,
	TEMP_SENSOR_PTC_1K_100C,
	TEMP_SENSOR_KTY83_122,
} temp_sensor_type;

// General purpose drive output mode
typedef enum {
	GPD_OUTPUT_MODE_NONE = 0,
	GPD_OUTPUT_MODE_MODULATION,
	GPD_OUTPUT_MODE_VOLTAGE,
	GPD_OUTPUT_MODE_CURRENT
} gpd_output_mode;

typedef enum {
	MOTOR_TYPE_BLDC = 0,
	MOTOR_TYPE_DC,
	MOTOR_TYPE_FOC,
	MOTOR_TYPE_GPD
} mc_motor_type;

// FOC current controller decoupling mode.
typedef enum {
	FOC_CC_DECOUPLING_DISABLED = 0,
	FOC_CC_DECOUPLING_CROSS,
	FOC_CC_DECOUPLING_BEMF,
	FOC_CC_DECOUPLING_CROSS_BEMF
} mc_foc_cc_decoupling_mode;

typedef enum {
	FOC_OBSERVER_ORTEGA_ORIGINAL = 0,
	FOC_OBSERVER_ORTEGA_ITERATIVE
} mc_foc_observer_type;

typedef enum {
	FAULT_CODE_NONE = 0,
	FAULT_CODE_OVER_VOLTAGE,
	FAULT_CODE_UNDER_VOLTAGE,
	FAULT_CODE_DRV,
	FAULT_CODE_ABS_OVER_CURRENT,
	FAULT_CODE_OVER_TEMP_FET,
	FAULT_CODE_OVER_TEMP_MOTOR,
	FAULT_CODE_GATE_DRIVER_OVER_VOLTAGE,
	FAULT_CODE_GATE_DRIVER_UNDER_VOLTAGE,
	FAULT_CODE_MCU_UNDER_VOLTAGE,
	FAULT_CODE_BOOTING_FROM_WATCHDOG_RESET,
	FAULT_CODE_ENCODER_SPI,
	FAULT_CODE_ENCODER_SINCOS_BELOW_MIN_AMPLITUDE,
	FAULT_CODE_ENCODER_SINCOS_ABOVE_MAX_AMPLITUDE,
	FAULT_CODE_FLASH_CORRUPTION,
	FAULT_CODE_HIGH_OFFSET_CURRENT_SENSOR_1,
	FAULT_CODE_HIGH_OFFSET_CURRENT_SENSOR_2,
	FAULT_CODE_HIGH_OFFSET_CURRENT_SENSOR_3,
	FAULT_CODE_UNBALANCED_CURRENTS,
	FAULT_CODE_BRK,
	FAULT_CODE_RESOLVER_LOT,
	FAULT_CODE_RESOLVER_DOS,
	FAULT_CODE_RESOLVER_LOS
} mc_fault_code;

typedef enum {
	CONTROL_MODE_DUTY = 0,
	CONTROL_MODE_SPEED,
	CONTROL_MODE_CURRENT,
	CONTROL_MODE_CURRENT_BRAKE,
	CONTROL_MODE_POS,
	CONTROL_MODE_HANDBRAKE,
	CONTROL_MODE_OPENLOOP,
	CONTROL_MODE_OPENLOOP_PHASE,
	CONTROL_MODE_OPENLOOP_DUTY,
	CONTROL_MODE_OPENLOOP_DUTY_PHASE,
	CONTROL_MODE_NONE
} mc_control_mode;

typedef enum {
	DISP_POS_MODE_NONE = 0,
	DISP_POS_MODE_INDUCTANCE,
	DISP_POS_MODE_OBSERVER,
	DISP_POS_MODE_ENCODER,
	DISP_POS_MODE_PID_POS,
	DISP_POS_MODE_PID_POS_ERROR,
	DISP_POS_MODE_ENCODER_OBSERVER_ERROR
} disp_pos_mode;

typedef enum {
	SENSOR_PORT_MODE_HALL = 0,
	SENSOR_PORT_MODE_ABI,
	SENSOR_PORT_MODE_AS5047_SPI,
	SENSOR_PORT_MODE_AD2S1205,
	SENSOR_PORT_MODE_SINCOS,
	SENSOR_PORT_MODE_TS5700N8501,
	SENSOR_PORT_MODE_TS5700N8501_MULTITURN
} sensor_port_mode;

typedef struct {
	float cycle_int_limit;
	float cycle_int_limit_running;
	float cycle_int_limit_max;
	float comm_time_sum;
	float comm_time_sum_min_rpm;
	int32_t comms;
	float time_at_comm;
} mc_rpm_dep_struct;

typedef enum {
	DRV8301_OC_LIMIT = 0,
	DRV8301_OC_LATCH_SHUTDOWN,
	DRV8301_OC_REPORT_ONLY,
	DRV8301_OC_DISABLED
} drv8301_oc_mode;

typedef enum {
	DEBUG_SAMPLING_OFF = 0,
	DEBUG_SAMPLING_NOW,
	DEBUG_SAMPLING_START,
	DEBUG_SAMPLING_TRIGGER_START,
	DEBUG_SAMPLING_TRIGGER_FAULT,
	DEBUG_SAMPLING_TRIGGER_START_NOSEND,
	DEBUG_SAMPLING_TRIGGER_FAULT_NOSEND,
	DEBUG_SAMPLING_SEND_LAST_SAMPLES
} debug_sampling_mode;

typedef enum {
	CAN_BAUD_125K = 0,
	CAN_BAUD_250K,
	CAN_BAUD_500K,
	CAN_BAUD_1M,
	CAN_BAUD_10K,
	CAN_BAUD_20K,
	CAN_BAUD_50K,
	CAN_BAUD_75K
} CAN_BAUD;

typedef enum {
	BATTERY_TYPE_LIION_3_0__4_2,
	BATTERY_TYPE_LIIRON_2_6__3_6,
	BATTERY_TYPE_LEAD_ACID
} BATTERY_TYPE;

typedef enum {
	HFI_SAMPLES_8 = 0,
	HFI_SAMPLES_16,
	HFI_SAMPLES_32
} foc_hfi_samples;

typedef struct {
	// Switching and drive
	mc_pwm_mode pwm_mode;
	mc_comm_mode comm_mode;
	mc_motor_type motor_type;
	mc_sensor_mode sensor_mode;
	// Limits
	float l_current_max;
	float l_current_min;
	float l_in_current_max;
	float l_in_current_min;
	float l_abs_current_max;
	float l_min_erpm;
	float l_max_erpm;
	float l_erpm_start;
	float l_max_erpm_fbrake;
	float l_max_erpm_fbrake_cc;
	float l_min_vin;
	float l_max_vin;
	float l_battery_cut_start;
	float l_battery_cut_end;
	bool l_slow_abs_current;
	float l_temp_fet_start;
	float l_temp_fet_end;
	float l_temp_motor_start;
	float l_temp_motor_end;
	float l_temp_accel_dec;
	float l_min_duty;
	float l_max_duty;
	float l_watt_max;
	float l_watt_min;
	float l_current_max_scale;
	float l_current_min_scale;
	// Overridden limits (Computed during runtime)
	float lo_current_max;
	float lo_current_min;
	float lo_in_current_max;
	float lo_in_current_min;
	float lo_current_motor_max_now;
	float lo_current_motor_min_now;
	// Sensorless (bldc)
	float sl_min_erpm;
	float sl_min_erpm_cycle_int_limit;
	float sl_max_fullbreak_current_dir_change;
	float sl_cycle_int_limit;
	float sl_phase_advance_at_br;
	float sl_cycle_int_rpm_br;
	float sl_bemf_coupling_k;
	// Hall sensor
	int8_t hall_table[8];
	float hall_sl_erpm;
	// FOC
	float foc_current_kp;
	float foc_current_ki;
	float foc_f_sw;
	float foc_dt_us;
	float foc_encoder_offset;
	bool foc_encoder_inverted;
	float foc_encoder_ratio;
	float foc_encoder_sin_offset;
	float foc_encoder_sin_gain;
	float foc_encoder_cos_offset;
	float foc_encoder_cos_gain;
	float foc_encoder_sincos_filter_constant;
	float foc_motor_l;
	float foc_motor_r;
	float foc_motor_flux_linkage;
	float foc_observer_gain;
	float foc_observer_gain_slow;
	float foc_pll_kp;
	float foc_pll_ki;
	float foc_duty_dowmramp_kp;
	float foc_duty_dowmramp_ki;
	float foc_openloop_rpm;
	float foc_sl_openloop_hyst;
	float foc_sl_openloop_time;
	float foc_sl_d_current_duty;
	float foc_sl_d_current_factor;
	mc_foc_sensor_mode foc_sensor_mode;
	uint8_t foc_hall_table[8];
	float foc_sl_erpm;
	bool foc_sample_v0_v7;
	bool foc_sample_high_current;
	float foc_sat_comp;
	bool foc_temp_comp;
	float foc_temp_comp_base_temp;
	float foc_current_filter_const;
	mc_foc_cc_decoupling_mode foc_cc_decoupling;
	mc_foc_observer_type foc_observer_type;
	float foc_hfi_voltage_start;
	float foc_hfi_voltage_run;
	float foc_hfi_voltage_max;
	float foc_sl_erpm_hfi;
	uint16_t foc_hfi_start_samples;
	float foc_hfi_obs_ovr_sec;
	foc_hfi_samples foc_hfi_samples;
	// GPDrive
	int gpd_buffer_notify_left;
	int gpd_buffer_interpol;
	float gpd_current_filter_const;
	float gpd_current_kp;
	float gpd_current_ki;
	// Speed PID
	float s_pid_kp;
	float s_pid_ki;
	float s_pid_kd;
	float s_pid_kd_filter;
	float s_pid_min_erpm;
	bool s_pid_allow_braking;
	// Pos PID
	float p_pid_kp;
	float p_pid_ki;
	float p_pid_kd;
	float p_pid_kd_filter;
	float p_pid_ang_div;
	// Current controller
	float cc_startup_boost_duty;
	float cc_min_current;
	float cc_gain;
	float cc_ramp_step_max;
	// Misc
	int32_t m_fault_stop_time_ms;
	float m_duty_ramp_step;
	float m_current_backoff_gain;
	uint32_t m_encoder_counts;
	sensor_port_mode m_sensor_port_mode;
	bool m_invert_direction;
	drv8301_oc_mode m_drv8301_oc_mode;
	int m_drv8301_oc_adj;
	float m_bldc_f_sw_min;
	float m_bldc_f_sw_max;
	float m_dc_f_sw;
	float m_ntc_motor_beta;
	out_aux_mode m_out_aux_mode;
	temp_sensor_type m_motor_temp_sens_type;
	float m_ptc_motor_coeff;
	// Setup info
	uint8_t si_motor_poles;
	float si_gear_ratio;
	float si_wheel_diameter;
	BATTERY_TYPE si_battery_type;
	int si_battery_cells;
	float si_battery_ah;
} mc_configuration;

// Applications to use
typedef enum {
	APP_NONE = 0,
	APP_PPM,
	APP_ADC,
	APP_UART,
	APP_PPM_UART,
	APP_ADC_UART,
	APP_NUNCHUK,
	APP_NRF,
	APP_CUSTOM,
	APP_BALANCE
} app_use;

// Throttle curve mode
typedef enum {
	THR_EXP_EXPO = 0,
	THR_EXP_NATURAL,
	THR_EXP_POLY
} thr_exp_mode;

// PPM control types
typedef enum {
	PPM_CTRL_TYPE_NONE = 0,
	PPM_CTRL_TYPE_CURRENT,
	PPM_CTRL_TYPE_CURRENT_NOREV,
	PPM_CTRL_TYPE_CURRENT_NOREV_BRAKE,
	PPM_CTRL_TYPE_DUTY,
	PPM_CTRL_TYPE_DUTY_NOREV,
	PPM_CTRL_TYPE_PID,
	PPM_CTRL_TYPE_PID_NOREV,
	PPM_CTRL_TYPE_CURRENT_BRAKE_REV_HYST,
	PPM_CTRL_TYPE_CURRENT_SMART_REV
} ppm_control_type;

typedef struct {
	ppm_control_type ctrl_type;
	float pid_max_erpm;
	float hyst;
	float pulse_start;
	float pulse_end;
	float pulse_center;
	bool median_filter;
	bool safe_start;
	float throttle_exp;
	float throttle_exp_brake;
	thr_exp_mode throttle_exp_mode;
	float ramp_time_pos;
	float ramp_time_neg;
	bool multi_esc;
	bool tc;
	float tc_max_diff;
	float max_erpm_for_dir;
	float smart_rev_max_duty;
	float smart_rev_ramp_time;
} ppm_config;

// ADC control types
typedef enum {
	ADC_CTRL_TYPE_NONE = 0,
	ADC_CTRL_TYPE_CURRENT,
	ADC_CTRL_TYPE_CURRENT_REV_CENTER,
	ADC_CTRL_TYPE_CURRENT_REV_BUTTON,
	ADC_CTRL_TYPE_CURRENT_REV_BUTTON_BRAKE_ADC,
	ADC_CTRL_TYPE_CURRENT_REV_BUTTON_BRAKE_CENTER,
	ADC_CTRL_TYPE_CURRENT_NOREV_BRAKE_CENTER,
	ADC_CTRL_TYPE_CURRENT_NOREV_BRAKE_BUTTON,
	ADC_CTRL_TYPE_CURRENT_NOREV_BRAKE_ADC,
	ADC_CTRL_TYPE_DUTY,
	ADC_CTRL_TYPE_DUTY_REV_CENTER,
	ADC_CTRL_TYPE_DUTY_REV_BUTTON,
	ADC_CTRL_TYPE_PID,
	ADC_CTRL_TYPE_PID_REV_CENTER,
	ADC_CTRL_TYPE_PID_REV_BUTTON
} adc_control_type;

typedef struct {
	adc_control_type ctrl_type;
	float hyst;
	float voltage_start;
	float voltage_end;
	float voltage_center;
	float voltage2_start;
	float voltage2_end;
	bool use_filter;
	bool safe_start;
	bool cc_button_inverted;
	bool rev_button_inverted;
	bool voltage_inverted;
	bool voltage2_inverted;
	float throttle_exp;
	float throttle_exp_brake;
	thr_exp_mode throttle_exp_mode;
	float ramp_time_pos;
	float ramp_time_neg;
	bool multi_esc;
	bool tc;
	float tc_max_diff;
	uint32_t update_rate_hz;
} adc_config;

// Nunchuk control types
typedef enum {
	CHUK_CTRL_TYPE_NONE = 0,
	CHUK_CTRL_TYPE_CURRENT,
	CHUK_CTRL_TYPE_CURRENT_NOREV
} chuk_control_type;

typedef struct {
	chuk_control_type ctrl_type;
	float hyst;
	float ramp_time_pos;
	float ramp_time_neg;
	float stick_erpm_per_s_in_cc;
	float throttle_exp;
	float throttle_exp_brake;
	thr_exp_mode throttle_exp_mode;
	bool multi_esc;
	bool tc;
	float tc_max_diff;
	bool use_smart_rev;
	float smart_rev_max_duty;
	float smart_rev_ramp_time;
} chuk_config;

// NRF Datatypes
typedef enum {
	NRF_SPEED_250K = 0,
	NRF_SPEED_1M,
	NRF_SPEED_2M
} NRF_SPEED;

typedef enum {
	NRF_POWER_M18DBM = 0,
	NRF_POWER_M12DBM,
	NRF_POWER_M6DBM,
	NRF_POWER_0DBM,
  NRF_POWER_OFF
} NRF_POWER;

typedef enum {
	NRF_AW_3 = 0,
	NRF_AW_4,
	NRF_AW_5
} NRF_AW;

typedef enum {
	NRF_CRC_DISABLED = 0,
	NRF_CRC_1B,
	NRF_CRC_2B
} NRF_CRC;

typedef enum {
	NRF_RETR_DELAY_250US = 0,
	NRF_RETR_DELAY_500US,
	NRF_RETR_DELAY_750US,
	NRF_RETR_DELAY_1000US,
	NRF_RETR_DELAY_1250US,
	NRF_RETR_DELAY_1500US,
	NRF_RETR_DELAY_1750US,
	NRF_RETR_DELAY_2000US,
	NRF_RETR_DELAY_2250US,
	NRF_RETR_DELAY_2500US,
	NRF_RETR_DELAY_2750US,
	NRF_RETR_DELAY_3000US,
	NRF_RETR_DELAY_3250US,
	NRF_RETR_DELAY_3500US,
	NRF_RETR_DELAY_3750US,
	NRF_RETR_DELAY_4000US
} NRF_RETR_DELAY;

typedef struct {
	NRF_SPEED speed;
	NRF_POWER power;
	NRF_CRC crc_type;
	NRF_RETR_DELAY retry_delay;
	unsigned char retries;
	unsigned char channel;
	unsigned char address[3];
	bool send_crc_ack;
} nrf_config;

typedef struct {
	float kp;
	float ki;
	float kd;
	uint16_t hertz;
	float pitch_fault;
	float roll_fault;
	float adc1;
	float adc2;
	float overspeed_duty;
	float tiltback_duty;
	float tiltback_angle;
	float tiltback_speed;
	float tiltback_high_voltage;
	float tiltback_low_voltage;
	float startup_pitch_tolerance;
	float startup_roll_tolerance;
	float startup_speed;
	float deadzone;
	float current_boost;
	bool multi_esc;
	float yaw_kp;
	float yaw_ki;
	float yaw_kd;
	float roll_steer_kp;
	float brake_current;
	uint16_t overspeed_delay;
	uint16_t fault_delay;
	float tiltback_constant;
} balance_config;

// CAN status modes
typedef enum {
	CAN_STATUS_DISABLED = 0,
	CAN_STATUS_1,
	CAN_STATUS_1_2,
	CAN_STATUS_1_2_3,
	CAN_STATUS_1_2_3_4,
	CAN_STATUS_1_2_3_4_5
} CAN_STATUS_MODE;

typedef enum {
	SHUTDOWN_MODE_ALWAYS_OFF = 0,
	SHUTDOWN_MODE_ALWAYS_ON,
	SHUTDOWN_MODE_TOGGLE_BUTTON_ONLY,
	SHUTDOWN_MODE_OFF_AFTER_10S,
	SHUTDOWN_MODE_OFF_AFTER_1M,
	SHUTDOWN_MODE_OFF_AFTER_5M,
	SHUTDOWN_MODE_OFF_AFTER_10M,
	SHUTDOWN_MODE_OFF_AFTER_30M,
	SHUTDOWN_MODE_OFF_AFTER_1H,
	SHUTDOWN_MODE_OFF_AFTER_5H,
} SHUTDOWN_MODE;

typedef enum {
	IMU_TYPE_OFF = 0,
	IMU_TYPE_INTERNAL,
	IMU_TYPE_EXTERNAL_MPU9X50,
	IMU_TYPE_EXTERNAL_ICM20948,
	IMU_TYPE_EXTERNAL_BMI160
} IMU_TYPE;

typedef enum {
	AHRS_MODE_MADGWICK = 0,
	AHRS_MODE_MAHONY
} AHRS_MODE;

typedef struct {
	IMU_TYPE type;
	AHRS_MODE mode;
	int sample_rate_hz;
	float accel_confidence_decay;
	float mahony_kp;
	float mahony_ki;
	float madgwick_beta;
	float rot_roll;
	float rot_pitch;
	float rot_yaw;
	float accel_offsets[3];
	float gyro_offsets[3];
	float gyro_offset_comp_fact[3];
	float gyro_offset_comp_clamp;
} imu_config;

typedef enum {
	CAN_MODE_VESC = 0,
	CAN_MODE_UAVCAN,
	CAN_MODE_COMM_BRIDGE
} CAN_MODE;

typedef struct {
	// Settings
	uint8_t controller_id;
	uint32_t timeout_msec;
	float timeout_brake_current;
	CAN_STATUS_MODE send_can_status;
	uint32_t send_can_status_rate_hz;
	CAN_BAUD can_baud_rate;
	bool pairing_done;
	bool permanent_uart_enabled;
	SHUTDOWN_MODE shutdown_mode;

	// CAN modes
	CAN_MODE can_mode;
	uint8_t uavcan_esc_index;

	// Application to use
	app_use app_to_use;

	// PPM application settings
	ppm_config app_ppm_conf;

	// ADC application settings
	adc_config app_adc_conf;

	// UART application settings
	uint32_t app_uart_baudrate;

	// Nunchuk application settings
	chuk_config app_chuk_conf;

	// NRF application settings
	nrf_config app_nrf_conf;

	// Balance application settings
	balance_config app_balance_conf;

	// IMU Settings
	imu_config imu_conf;
} app_configuration;

// Communication commands
typedef enum {
	COMM_FW_VERSION = 0,
	COMM_JUMP_TO_BOOTLOADER,
	COMM_ERASE_NEW_APP,
	COMM_WRITE_NEW_APP_DATA,
	COMM_GET_VALUES,
	COMM_SET_DUTY,
	COMM_SET_CURRENT,
	COMM_SET_CURRENT_BRAKE,
	COMM_SET_RPM,
	COMM_SET_POS,
	COMM_SET_HANDBRAKE,
	COMM_SET_DETECT,
	COMM_SET_SERVO_POS,
	COMM_SET_MCCONF,
	COMM_GET_MCCONF,
	COMM_GET_MCCONF_DEFAULT,
	COMM_SET_APPCONF,
	COMM_GET_APPCONF,
	COMM_GET_APPCONF_DEFAULT,
	COMM_SAMPLE_PRINT,
	COMM_TERMINAL_CMD,
	COMM_PRINT,
	COMM_ROTOR_POSITION,
	COMM_EXPERIMENT_SAMPLE,
	COMM_DETECT_MOTOR_PARAM,
	COMM_DETECT_MOTOR_R_L,
	COMM_DETECT_MOTOR_FLUX_LINKAGE,
	COMM_DETECT_ENCODER,
	COMM_DETECT_HALL_FOC,
	COMM_REBOOT,
	COMM_ALIVE,
	COMM_GET_DECODED_PPM,
	COMM_GET_DECODED_ADC,
	COMM_GET_DECODED_CHUK,
	COMM_FORWARD_CAN,
	COMM_SET_CHUCK_DATA,
	COMM_CUSTOM_APP_DATA,
	COMM_NRF_START_PAIRING,
	COMM_GPD_SET_FSW,
	COMM_GPD_BUFFER_NOTIFY,
	COMM_GPD_BUFFER_SIZE_LEFT,
	COMM_GPD_FILL_BUFFER,
	COMM_GPD_OUTPUT_SAMPLE,
	COMM_GPD_SET_MODE,
	COMM_GPD_FILL_BUFFER_INT8,
	COMM_GPD_FILL_BUFFER_INT16,
	COMM_GPD_SET_BUFFER_INT_SCALE,
	COMM_GET_VALUES_SETUP,
	COMM_SET_MCCONF_TEMP,
	COMM_SET_MCCONF_TEMP_SETUP,
	COMM_GET_VALUES_SELECTIVE,
	COMM_GET_VALUES_SETUP_SELECTIVE,
	COMM_EXT_NRF_PRESENT,
	COMM_EXT_NRF_ESB_SET_CH_ADDR,
	COMM_EXT_NRF_ESB_SEND_DATA,
	COMM_EXT_NRF_ESB_RX_DATA,
	COMM_EXT_NRF_SET_ENABLED,
	COMM_DETECT_MOTOR_FLUX_LINKAGE_OPENLOOP,
	COMM_DETECT_APPLY_ALL_FOC,
	COMM_JUMP_TO_BOOTLOADER_ALL_CAN,
	COMM_ERASE_NEW_APP_ALL_CAN,
	COMM_WRITE_NEW_APP_DATA_ALL_CAN,
	COMM_PING_CAN,
	COMM_APP_DISABLE_OUTPUT,
	COMM_TERMINAL_CMD_SYNC,
	COMM_GET_IMU_DATA,
	COMM_BM_CONNECT,
	COMM_BM_ERASE_FLASH_ALL,
	COMM_BM_WRITE_FLASH,
	COMM_BM_REBOOT,
	COMM_BM_DISCONNECT,
	COMM_BM_MAP_PINS_DEFAULT,
	COMM_BM_MAP_PINS_NRF5X,
	COMM_ERASE_BOOTLOADER,
	COMM_ERASE_BOOTLOADER_ALL_CAN,
	COMM_PLOT_INIT,
	COMM_PLOT_DATA,
	COMM_PLOT_ADD_GRAPH,
	COMM_PLOT_SET_GRAPH,
	COMM_GET_DECODED_BALANCE,
	COMM_BM_MEM_READ,
	COMM_WRITE_NEW_APP_DATA_LZO,
	COMM_WRITE_NEW_APP_DATA_ALL_CAN_LZO,
	COMM_BM_WRITE_FLASH_LZO,
	COMM_SET_CURRENT_REL,
	COMM_CAN_FWD_FRAME
} COMM_PACKET_ID;

// CAN commands
typedef enum {
	CAN_PACKET_SET_DUTY = 0,
	CAN_PACKET_SET_CURRENT,
	CAN_PACKET_SET_CURRENT_BRAKE,
	CAN_PACKET_SET_RPM,
	CAN_PACKET_SET_POS,
	CAN_PACKET_FILL_RX_BUFFER,
	CAN_PACKET_FILL_RX_BUFFER_LONG,
	CAN_PACKET_PROCESS_RX_BUFFER,
	CAN_PACKET_PROCESS_SHORT_BUFFER,
	CAN_PACKET_STATUS,
	CAN_PACKET_SET_CURRENT_REL,
	CAN_PACKET_SET_CURRENT_BRAKE_REL,
	CAN_PACKET_SET_CURRENT_HANDBRAKE,
	CAN_PACKET_SET_CURRENT_HANDBRAKE_REL,
	CAN_PACKET_STATUS_2,
	CAN_PACKET_STATUS_3,
	CAN_PACKET_STATUS_4,
	CAN_PACKET_PING,
	CAN_PACKET_PONG,
	CAN_PACKET_DETECT_APPLY_ALL_FOC,
	CAN_PACKET_DETECT_APPLY_ALL_FOC_RES,
	CAN_PACKET_CONF_CURRENT_LIMITS,
	CAN_PACKET_CONF_STORE_CURRENT_LIMITS,
	CAN_PACKET_CONF_CURRENT_LIMITS_IN,
	CAN_PACKET_CONF_STORE_CURRENT_LIMITS_IN,
	CAN_PACKET_CONF_FOC_ERPMS,
	CAN_PACKET_CONF_STORE_FOC_ERPMS,
	CAN_PACKET_STATUS_5,
	CAN_PACKET_POLL_TS5700N8501_STATUS
} CAN_PACKET_ID;

// Logged fault data
typedef struct {
	mc_fault_code fault;
	float current;
	float current_filtered;
	float voltage;
	float gate_driver_voltage;
	float duty;
	float rpm;
	int tacho;
	int cycles_running;
	int tim_val_samp;
	int tim_current_samp;
	int tim_top;
	int comm_step;
	float temperature;
	int drv8301_faults;
} fault_data;

// External LED state
typedef enum {
	LED_EXT_OFF = 0,
	LED_EXT_NORMAL,
	LED_EXT_BRAKE,
	LED_EXT_TURN_LEFT,
	LED_EXT_TURN_RIGHT,
	LED_EXT_BRAKE_TURN_LEFT,
	LED_EXT_BRAKE_TURN_RIGHT,
	LED_EXT_BATT
} LED_EXT_STATE;

typedef struct {
	int js_x;
	int js_y;
	int acc_x;
	int acc_y;
	int acc_z;
	bool bt_c;
	bool bt_z;
	bool rev_has_state;
	bool is_rev;
} chuck_data;

typedef struct {
	int id;
	systime_t rx_time;
	float rpm;
	float current;
	float duty;
} can_status_msg;

typedef struct {
	int id;
	systime_t rx_time;
	float amp_hours;
	float amp_hours_charged;
} can_status_msg_2;

typedef struct {
	int id;
	systime_t rx_time;
	float watt_hours;
	float watt_hours_charged;
} can_status_msg_3;

typedef struct {
	int id;
	systime_t rx_time;
	float temp_fet;
	float temp_motor;
	float current_in;
	float pid_pos_now;
} can_status_msg_4;

typedef struct {
	int id;
	systime_t rx_time;
	float v_in;
	int32_t tacho_value;
} can_status_msg_5;

typedef struct {
	uint8_t js_x;
	uint8_t js_y;
	bool bt_c;
	bool bt_z;
	bool bt_push;
	bool rev_has_state;
	bool is_rev;
	float vbat;
} mote_state;

typedef enum {
	MOTE_PACKET_BATT_LEVEL = 0,
	MOTE_PACKET_BUTTONS,
	MOTE_PACKET_ALIVE,
	MOTE_PACKET_FILL_RX_BUFFER,
	MOTE_PACKET_FILL_RX_BUFFER_LONG,
	MOTE_PACKET_PROCESS_RX_BUFFER,
	MOTE_PACKET_PROCESS_SHORT_BUFFER,
	MOTE_PACKET_PAIRING_INFO
} MOTE_PACKET;

typedef struct {
	float v_in;
	float temp_mos1;
	float temp_mos2;
	float temp_mos3;
	float temp_mos4;
    float temp_mos5;
    float temp_mos6;
    float temp_pcb;
    float current_motor;
    float current_in;
    float rpm;
    float duty_now;
    float amp_hours;
    float amp_hours_charged;
    float watt_hours;
    float watt_hours_charged;
    int tachometer;
    int tachometer_abs;
    mc_fault_code fault_code;
} mc_values;

typedef enum {
	NRF_PAIR_STARTED = 0,
	NRF_PAIR_OK,
	NRF_PAIR_FAIL
} NRF_PAIR_RES;

// Orientation data
typedef struct {
	float q0;
	float q1;
	float q2;
	float q3;
	float integralFBx;
	float integralFBy;
	float integralFBz;
	float accMagP;
	int initialUpdateDone;
} ATTITUDE_INFO;

// Custom EEPROM variables
typedef union {
	uint32_t as_u32;
	int32_t as_i32;
	float as_float;
} eeprom_var;

#define EEPROM_VARS_HW			64
#define EEPROM_VARS_CUSTOM		64

typedef struct {
	float ah_tot;
	float ah_charge_tot;
	float wh_tot;
	float wh_charge_tot;
	float current_tot;
	float current_in_tot;
	uint8_t num_vescs;
} setup_values;

#endif /* DATATYPES_H_ */