+
+
+Connection to device lost
+
+
+
+ The connection to your device was lost. Please make sure your device is
+ still connected and do not disconnect your device again until the
+ installation is finished.
+
+ If this continues to happen, you might want to try using a different USB cable.
+ Old cables tend to become less reliable. Please try using a different USB cable
+ and do not touch the device during the installation, unless you are prompted
+ to do so.
+
+
+
+How to enable developer mode
+
+
++ Please select the operating system that is currently installed on your + device to learn how to enable developer mode. +
+
+
+
+
+ Ubuntu Touch
+
+
+
+
+
+ This is done from System Settings.
+
+
-
+
- + Open System Settings, go to About this Phone, and then Developer + Mode. + +
- + The adb service will be enabled if 'developer mode' is selected. + Note that you must have some sort of lock screen security + enabled (pin or password), and 'Developer mode' will be greyed + out if that's not the case. + +
- + The 'Lock Security' menu there can be used to set a pin or + password. + +
+ 
+
+
+
+
+
+
+ Android
+
+
+
+
+
+ This is done from System Settings.
+
+
-
+
- + Go to the settings menu, scroll down and select "About phone". + +
- + Scroll down to the bottom again, where you see "Build number." + +
- + Tap it seven (7) times. After the third tap, you'll see a dialog + that says you're four taps away from being a developer. Keep on + tapping until you see a dialog saying "You're now a developer" + +
- + Now go back to the Settings menu and find "developer settings" + (sometimes called "developer options"), Tap that. + +
- + Enable "USB debugging", "ADB" or "Android Debug Bridge" option. + If you see it, also enable the "allow OEM unlock" option, but + that is not available on every device. + +
+ 
+
+
+ Yikes!
+
+
+ + The Installation stopped due to a problem. You can choose to ignore this, + or re-start the installation process. +
++ If this continues to happen, please check if you are affected by + shell.openExternal( + "https://github.com/ubports/ubports-installer/issues" + )}>a known bug. +
++ If your problem is not yet known, click the button below to report a new + bug. +
+{errorData.text}\n
+ {#if showNotLatestStable}
+ + You are not using the latest stable version of the UBports Installer. +
+ {/if} + {#if showGenericUpdateInstructionsError} + + {/if} + {#if showSnapUpdateInstructionsError} +
+ Run snap refresh ubports-installer --stable in your terminal
+ to install the latest version.
+
+ If you need help, you can join UBports' support channels on + + shell.openExternal("https://t.me/WelcomePlus")}>telegram + or + + shell.openExternal( + "https://matrix.to/#/!KwdniMNeTmClpgHkND:matrix.org?via=matrix.org&via=ubports.chat&via=disroot.org" + )}>matrix + or ask a question + + shell.openExternal("https://forums.ubports.com")}>in the forum + or on + + shell.openExternal("https://askubuntu.com")}>askubuntu. As a last resort, we also have + + shell.openExternal("https://devices.ubuntu-touch.io")} + >manual installation instructions for every device, that you can follow if you want to install without using the UBports + Installer. +
+
+
+
+
+
+Low Power
+
+
+ + The battery of your device is critically low. This can cause severe + Problems while flashing. +
+ Please let your device charge for a while and try again. +
+
+
+
+
+
+
diff --git a/src/ui/modals/specific-modals/NewUpdateModal.svelte b/src/ui/modals/specific-modals/NewUpdateModal.svelte
new file mode 100644
index 00000000..02f2690c
--- /dev/null
+++ b/src/ui/modals/specific-modals/NewUpdateModal.svelte
@@ -0,0 +1,37 @@
+
+
+
+
+
+
+ {#if showCloseButton}
+
+ {/if}
+
+Update available!
+
+
+ + You are not running the latest stable version. Using the latest stable + release is recommended for most users. You can still use this version, but + there might be bugs and issues that do not affect the stable release. +
+ {#if global.packageInfo.package === "snap"} +
+ Run snap refresh ubports-installer --stable in your terminal
+ to install the latest version.
+
Click the button below to download the latest version.
+ {/if} +
+
+ {#if global.packageInfo.package !== "snap"}
+
+ {/if}
+
+Internet connection lost
+
+
+ + The installer failed to connect to the UBports servers. Are you connected + to the internet? If you're using a proxy, you might have to + shell.openExternal( + "https://www.golinuxcloud.com/set-up-proxy-http-proxy-environment-variable/" + )}>configure it + by setting the https_proxy environment variable. +
+
+
+
+Bootloader locked
+
+ {#if oemUnlockData.enable}
+
+ + Your device's bootloader is locked, that means installation of third + party operating systems like Ubuntu Touch is disabled. +
+ + Removing this lock might void the warranty. If you want to be sure, + please ask your manufacturer or vendor if they allow this. UBports is + not responsible and won't replace devices in case of warranty loss. You + are responsible for your own actions. + +Do you want to unlock your device now?
+You might see a confirmation dialog on your device next.
+ {:else} ++ Your device could not be unlocked. Please make sure OEM unlocking is + enabled in the devices' showDeveloperModeModal.set(true)} + >developer options. After that, you can select the button below to continue the + installation. +
+ {/if} + {#if oemUnlockData.url} ++ You have to obtain an unlocking code from shell.openExternal(oemUnlockData.url)} + >your vendor. Please enter the code below and click the button to continue. +
+ + {/if} +
+
+
+ {#if showUnlockProgress}
+
+ {/if}
+
+Install options
+
+
+
+ {#each $osInstructsData as osInstruction, osInstructsCounter}
+
+
+
+
+ {#if osInstruction.tooltip}
+
+ {#if osInstruction.type === "select"}
+
+ {:else if osInstruction.type === "checkbox"}
+
+ {/if}
+
+ -
+
+
- + {osInstruction.tooltip} + {#if osInstruction.link} + + shell.openExternal(osInstruction.link)}>More... + {/if} + +
+ NOTE: Installing may in rare cases lead to data loss. If the device + is running Android, please note that you won't be able to access your + Android data and/or apps in Ubuntu Touch. However the Android data will + use storage space, so if you don't want it, please select the "Wipe" + option. It's always wise to backup before installing. +
+
+
+
+Report your result
+
+
+ + To fix issues in the UBports Installer, it is vital that the developers + recieve detailed feedback. To make this easier, the installer automates + the reporting process. If you're interested in helping us make the UBports + Installer better, keep reading! If not, click the button below and we will + not bother you again. +
++ The UBports Community uses + shell.openExternal( + "https://ubports.open-cuts.org/system/5e9d746c6346e112514cfec7" + )}>OPEN-CUTS, the open crowdsourced user testing suite + to manage manual testing and + + shell.openExternal( + "https://github.com/ubports/ubports-installer/issues" + )}>GitHub to track bugs and feature requests for the UBports Installer. Since the installer + developers rarely have access to all the devices the installer supports, it + is vital for them to also recieve reports about what works. +
++ Select a result from the buttons below. You will see another window where + you can explain your experience in more detail and modify all the data + before submitting. +
++ Select the PASS option if everything worked as expected. If you + experienced minor issues or annoyances, but finally succeeded in + installing your device, select the WONKY result. The FAIL result + indicates a more severe problem. +
+
+ {#if showDoNotAskAgainButton}
+
+ {/if}
+
+
+
+
+
+Select your device
+
+
+
+
+
+
+
+
+ + Not all + shell.openExternal("https://devices.ubuntu-touch.io")} + >Ubuntu Touch devices + are supported by the UBports Installer yet. You can find installation instructions + for devices not listed here on + + shell.openExternal("https://devices.ubuntu-touch.io")} + >devices.ubuntu-touch.io. If you want to help, you can + + shell.openExternal( + "https://github.com/ubports/installer-configs/blob/master/v1/_device.schema.json" + )}>contribute a config file for any device and operating system! +
++ Please do not try to install other devices images on your device. It will not work! +
+
+
+
+Warning!
+
+
+
+ The installer needs to have the appropriate udev rules set to be able to
+ communicate with devices over adb or fastboot. Click the button below to
+ have the installer set up the rules automatically. You will be prompted to
+ authorize this with your admin password.
+
+ Alternatively, you can choose to do this
+
+ shell.openExternal(
+ "https://docs.ubports.com/en/latest/userguide/install.html#missing-udev-rules"
+ )}>manually through the command-line.
+
+
+
+
+
+Read before installing!
+
+
+
+ {#each Object.keys(unlockData) as action}
+
+ -
+
- {unlockData[action].title} +
- + {unlockData[action].description} + + {#if unlockData[action].link} + +
- + + shell.openExternal(unlockData[action].link)}>More... + + {/if} +
+
+
+Warning!
+
+
+
+
+ + You need to install the + shell.openExternal("https://adb.clockworkmod.com/")} + >Universal ADB driver + or the alternative + + shell.openExternal("https://adbdriver.com/downloads/")}>ADB driver and re-start the program to continue with the installation. If you have already + installed adb drivers, you can dismiss this message and simply continue with + the installation. +
++
+ If installer still does not detect your device, you might want to try + installing + shell.openExternal("https://developer.android.com/studio/releases/")} + >Android Studio from Google. After that, you can specify custom adb and fastboot tools in + the options in the next step. +
++
+ As a last resort, we also have + shell.openExternal("https://devices.ubuntu-touch.io")} + >manual installation instructions for every device, that you can follow if you want to install without using the UBports + Installer. +
+
+
+
+
+
+
+
+
+
+
diff --git a/src/ui/partials/Yumi.svelte b/src/ui/partials/Yumi.svelte
new file mode 100644
index 00000000..d9065815
--- /dev/null
+++ b/src/ui/partials/Yumi.svelte
@@ -0,0 +1,70 @@
+
+
+
+
+
diff --git a/src/ui/views/Done.svelte b/src/ui/views/Done.svelte
new file mode 100644
index 00000000..6f9282e1
--- /dev/null
+++ b/src/ui/views/Done.svelte
@@ -0,0 +1,59 @@
+
+
+
+
diff --git a/src/ui/views/ManualDownload.svelte b/src/ui/views/ManualDownload.svelte
new file mode 100644
index 00000000..374aecef
--- /dev/null
+++ b/src/ui/views/ManualDownload.svelte
@@ -0,0 +1,75 @@
+
+
+
+ 
+
+
+
+
+Success!
++ The installation process from the computer is done. The device will now + perform the remaining steps which should take less than five minutes. + After the installation, the device will reboot and you can begin to + explore Ubuntu Touch. +
++ Found something you don't like? + shell.openExternal("https://github.com/ubports/ubports-touch")} + >Tell us, or help us change it! +
++ Development of Ubuntu Touch is driven by the + shell.openExternal("https://ubports.com")}>UBports Community. Donate now to allow us to continue our mission! + + +
++ Got more devices you want to flash? + +
+
+
diff --git a/src/ui/views/NotSupported.svelte b/src/ui/views/NotSupported.svelte
new file mode 100644
index 00000000..112289b1
--- /dev/null
+++ b/src/ui/views/NotSupported.svelte
@@ -0,0 +1,53 @@
+
+
+
+ 
+
+
+
+
+Manual Download
++ The {$manualDownloadGroup} file + {$manualDownloadFileData.name} needs to be manually downloaded due to + licensing restrictions. Sorry for the inconvenience! +
++ Please download the file {$manualDownloadFileData.name} from + + shell.openExternal($manualDownloadFileData.url)} + >{$manualDownloadFileData.url}. +
+ {#if global.packageInfo.package === "snap"} ++ Once you have it, enter the path and click the button below to continue. +
+ {:else} ++ Once you have it, select it in the file picker and click the button + below to continue. +
+ {/if} +
+
+
+
+
+ {#if global.packageInfo.package === "snap"}
+
+ {:else}
+
+ {/if}
+
+
+
diff --git a/src/ui/views/SelectOs.svelte b/src/ui/views/SelectOs.svelte
new file mode 100644
index 00000000..561bdb1e
--- /dev/null
+++ b/src/ui/views/SelectOs.svelte
@@ -0,0 +1,76 @@
+
+
+
+ 
+
+
+
+
+
+Device not supported
++ Your device: + {$deviceName} +
++ Sorry + , there is no port for this device yet! +
++ See + + shell.openExternal("http://devices.ubuntu-touch.io")} + >devices.ubuntu-touch.io + for more info +
++
You want to try to install anyway?
++ You can try selecting your device manually, but please only do so if + you're sure that your exact model is actually supported! You might also + want to + shell.openExternal("http://devices.ubuntu-touch.io")}>file a bug. +
+ +
+
diff --git a/src/ui/views/UserAction.svelte b/src/ui/views/UserAction.svelte
new file mode 100644
index 00000000..cfd11a7d
--- /dev/null
+++ b/src/ui/views/UserAction.svelte
@@ -0,0 +1,33 @@
+
+
+
+
+
+
+
+
++ {$installConfigData.name} ({$installConfigData.codename}) +
++ + shell.openExternal( + `https://devices.ubuntu-touch.io/device/${$installConfigData.codename}` + )}>about this device + + shell.openExternal( + `https://github.com/ubports/installer-configs/blob/master/v1/${$installConfigData.codename}.json` + )}>view config file +
++ Please make sure you enabled showDeveloperModeModal.set(true)} + >developer mode and OEM unlocking. +
+What operating system do you want to install?
+
+
+
+
+
+
+
+
+
+
+
diff --git a/src/ui/views/WaitForDevice.svelte b/src/ui/views/WaitForDevice.svelte
new file mode 100644
index 00000000..ad7b3d38
--- /dev/null
+++ b/src/ui/views/WaitForDevice.svelte
@@ -0,0 +1,74 @@
+
+
+
+ 
+
+
+
++ {$actionData.title} +
++ {$actionData.description} +
+ {#if $actionData.button} + + {/if} +
+
+
+
diff --git a/src/ui/views/Working.svelte b/src/ui/views/Working.svelte
new file mode 100644
index 00000000..144528e4
--- /dev/null
+++ b/src/ui/views/Working.svelte
@@ -0,0 +1,125 @@
+
+
+
+ 
+
+
+
+
+Please connect your device
++ Welcome to the UBports Installer! This tool will walk you through the + Ubuntu Touch installation process. Don't worry, it's easy! +
++ Connect your device to the computer and enable developer mode. After that, + your device should be detected automatically. +
+ ++ If your device is not detected automatically, you can select it manually + to proceed. Please note that the UBports Installer will only work on + + shell.openExternal("http://devices.ubuntu-touch.io")} + >supported devices. +
+ +
+ {#if $animationType === "particles"}
+
+
+ {/if}
+ {#if $animationType === "download"}
+
+ {/if}
+ {#if $animationType === "push"}
+
+ {/if}
+
+
+
+