Skip to content

Commit

Permalink
mlxbf_gige: support 10M/100M/1G speeds on BlueField-3
Browse files Browse the repository at this point in the history 
The BlueField-3 OOB interface supports 10Mbps, 100Mbps, and 1Gbps speeds.
The external PHY is responsible for autonegotiating the speed with the
link partner. Once the autonegotiation is done, the BlueField PLU needs
to be configured accordingly.

This patch does two things:
1) Initialize the advertised control flow/duplex/speed in the probe
   based on the BlueField SoC generation (2 or 3)
2) Adjust the PLU speed config in the PHY interrupt handler

Signed-off-by: David Thompson <[email protected]>
Signed-off-by: Asmaa Mnebhi <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
  • Loading branch information
@dthompso @kuba-moo
dthompso authored and kuba-moo committed Jan 14, 2023
1 parent 2321d69 commit 20d03d4
Show file tree
Hide file tree
Showing 3 changed files with 119 additions and 15 deletions.
8 changes: 8 additions & 0 deletions drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -14,6 +14,7 @@
#include <linux/irqreturn.h>
#include <linux/netdevice.h>
#include <linux/irq.h>
#include <linux/phy.h>

/* The silicon design supports a maximum RX ring size of
* 32K entries. Based on current testing this maximum size
Expand Down Expand Up @@ -84,6 +85,12 @@ struct mlxbf_gige_mdio_gw {
struct mlxbf_gige_reg_param st1;
};

struct mlxbf_gige_link_cfg {
void (*set_phy_link_mode)(struct phy_device *phydev);
void (*adjust_link)(struct net_device *netdev);
phy_interface_t phy_mode;
};

struct mlxbf_gige {
void __iomem *base;
void __iomem *llu_base;
Expand Down Expand Up @@ -121,6 +128,7 @@ struct mlxbf_gige {
struct mlxbf_gige_stats stats;
u8 hw_version;
struct mlxbf_gige_mdio_gw *mdio_gw;
int prev_speed;
};

/* Rx Work Queue Element definitions */
Expand Down
105 changes: 90 additions & 15 deletions drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -263,13 +263,99 @@ static const struct net_device_ops mlxbf_gige_netdev_ops = {
.ndo_get_stats64 = mlxbf_gige_get_stats64,
};

static void mlxbf_gige_adjust_link(struct net_device *netdev)
static void mlxbf_gige_bf2_adjust_link(struct net_device *netdev)
{
struct phy_device *phydev = netdev->phydev;

phy_print_status(phydev);
}

static void mlxbf_gige_bf3_adjust_link(struct net_device *netdev)
{
struct mlxbf_gige *priv = netdev_priv(netdev);
struct phy_device *phydev = netdev->phydev;
u8 sgmii_mode;
u16 ipg_size;
u32 val;

if (phydev->link && phydev->speed != priv->prev_speed) {
switch (phydev->speed) {
case 1000:
ipg_size = MLXBF_GIGE_1G_IPG_SIZE;
sgmii_mode = MLXBF_GIGE_1G_SGMII_MODE;
break;
case 100:
ipg_size = MLXBF_GIGE_100M_IPG_SIZE;
sgmii_mode = MLXBF_GIGE_100M_SGMII_MODE;
break;
case 10:
ipg_size = MLXBF_GIGE_10M_IPG_SIZE;
sgmii_mode = MLXBF_GIGE_10M_SGMII_MODE;
break;
default:
return;
}

val = readl(priv->plu_base + MLXBF_GIGE_PLU_TX_REG0);
val &= ~(MLXBF_GIGE_PLU_TX_IPG_SIZE_MASK | MLXBF_GIGE_PLU_TX_SGMII_MODE_MASK);
val |= FIELD_PREP(MLXBF_GIGE_PLU_TX_IPG_SIZE_MASK, ipg_size);
val |= FIELD_PREP(MLXBF_GIGE_PLU_TX_SGMII_MODE_MASK, sgmii_mode);
writel(val, priv->plu_base + MLXBF_GIGE_PLU_TX_REG0);

val = readl(priv->plu_base + MLXBF_GIGE_PLU_RX_REG0);
val &= ~MLXBF_GIGE_PLU_RX_SGMII_MODE_MASK;
val |= FIELD_PREP(MLXBF_GIGE_PLU_RX_SGMII_MODE_MASK, sgmii_mode);
writel(val, priv->plu_base + MLXBF_GIGE_PLU_RX_REG0);

priv->prev_speed = phydev->speed;
}

phy_print_status(phydev);
}

static void mlxbf_gige_bf2_set_phy_link_mode(struct phy_device *phydev)
{
/* MAC only supports 1000T full duplex mode */
phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_100baseT_Full_BIT);
phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_100baseT_Half_BIT);
phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_10baseT_Full_BIT);
phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_10baseT_Half_BIT);

/* Only symmetric pause with flow control enabled is supported so no
* need to negotiate pause.
*/
linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->advertising);
linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->advertising);
}

static void mlxbf_gige_bf3_set_phy_link_mode(struct phy_device *phydev)
{
/* MAC only supports full duplex mode */
phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_100baseT_Half_BIT);
phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_10baseT_Half_BIT);

/* Only symmetric pause with flow control enabled is supported so no
* need to negotiate pause.
*/
linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->advertising);
linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->advertising);
}

static struct mlxbf_gige_link_cfg mlxbf_gige_link_cfgs[] = {
[MLXBF_GIGE_VERSION_BF2] = {
.set_phy_link_mode = mlxbf_gige_bf2_set_phy_link_mode,
.adjust_link = mlxbf_gige_bf2_adjust_link,
.phy_mode = PHY_INTERFACE_MODE_GMII
},
[MLXBF_GIGE_VERSION_BF3] = {
.set_phy_link_mode = mlxbf_gige_bf3_set_phy_link_mode,
.adjust_link = mlxbf_gige_bf3_adjust_link,
.phy_mode = PHY_INTERFACE_MODE_SGMII
}
};

static int mlxbf_gige_probe(struct platform_device *pdev)
{
struct phy_device *phydev;
Expand Down Expand Up @@ -359,25 +445,14 @@ static int mlxbf_gige_probe(struct platform_device *pdev)
phydev->irq = phy_irq;

err = phy_connect_direct(netdev, phydev,
mlxbf_gige_adjust_link,
PHY_INTERFACE_MODE_GMII);
mlxbf_gige_link_cfgs[priv->hw_version].adjust_link,
mlxbf_gige_link_cfgs[priv->hw_version].phy_mode);
if (err) {
dev_err(&pdev->dev, "Could not attach to PHY\n");
goto out;
}

/* MAC only supports 1000T full duplex mode */
phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_100baseT_Full_BIT);
phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_100baseT_Half_BIT);
phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_10baseT_Full_BIT);
phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_10baseT_Half_BIT);

/* Only symmetric pause with flow control enabled is supported so no
* need to negotiate pause.
*/
linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->advertising);
linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->advertising);
mlxbf_gige_link_cfgs[priv->hw_version].set_phy_link_mode(phydev);

/* Display information about attached PHY device */
phy_attached_info(phydev);
Expand Down
21 changes: 21 additions & 0 deletions drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_regs.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -8,6 +8,8 @@
#ifndef __MLXBF_GIGE_REGS_H__
#define __MLXBF_GIGE_REGS_H__

#include <linux/bitfield.h>

#define MLXBF_GIGE_VERSION 0x0000
#define MLXBF_GIGE_VERSION_BF2 0x0
#define MLXBF_GIGE_VERSION_BF3 0x1
Expand Down Expand Up @@ -78,4 +80,23 @@
*/
#define MLXBF_GIGE_MMIO_REG_SZ (MLXBF_GIGE_MAC_CFG + 8)

#define MLXBF_GIGE_PLU_TX_REG0 0x80
#define MLXBF_GIGE_PLU_TX_IPG_SIZE_MASK GENMASK(11, 0)
#define MLXBF_GIGE_PLU_TX_SGMII_MODE_MASK GENMASK(15, 14)

#define MLXBF_GIGE_PLU_RX_REG0 0x10
#define MLXBF_GIGE_PLU_RX_SGMII_MODE_MASK GENMASK(25, 24)

#define MLXBF_GIGE_1G_SGMII_MODE 0x0
#define MLXBF_GIGE_10M_SGMII_MODE 0x1
#define MLXBF_GIGE_100M_SGMII_MODE 0x2

/* ipg_size default value for 1G is fixed by HW to 11 + End = 12.
* So for 100M it is 12 * 10 - 1 = 119
* For 10M, it is 12 * 100 - 1 = 1199
*/
#define MLXBF_GIGE_1G_IPG_SIZE 11
#define MLXBF_GIGE_100M_IPG_SIZE 119
#define MLXBF_GIGE_10M_IPG_SIZE 1199

#endif /* !defined(__MLXBF_GIGE_REGS_H__) */

0 comments on commit 20d03d4

Please sign in to comment.