-
Notifications
You must be signed in to change notification settings - Fork 54.5k
/
sysfs-driver-qat
95 lines (75 loc) · 3.1 KB
/
sysfs-driver-qat
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
What: /sys/bus/pci/devices/<BDF>/qat/state
Date: June 2022
KernelVersion: 6.0
Contact: [email protected]
Description: (RW) Reports the current state of the QAT device. Write to
the file to start or stop the device.
The values are:
* up: the device is up and running
* down: the device is down
It is possible to transition the device from up to down only
if the device is up and vice versa.
This attribute is only available for qat_4xxx devices.
What: /sys/bus/pci/devices/<BDF>/qat/cfg_services
Date: June 2022
KernelVersion: 6.0
Contact: [email protected]
Description: (RW) Reports the current configuration of the QAT device.
Write to the file to change the configured services.
The values are:
* sym;asym: the device is configured for running crypto
services
* asym;sym: identical to sym;asym
* dc: the device is configured for running compression services
* sym: the device is configured for running symmetric crypto
services
* asym: the device is configured for running asymmetric crypto
services
* asym;dc: the device is configured for running asymmetric
crypto services and compression services
* dc;asym: identical to asym;dc
* sym;dc: the device is configured for running symmetric crypto
services and compression services
* dc;sym: identical to sym;dc
It is possible to set the configuration only if the device
is in the `down` state (see /sys/bus/pci/devices/<BDF>/qat/state)
The following example shows how to change the configuration of
a device configured for running crypto services in order to
run data compression::
# cat /sys/bus/pci/devices/<BDF>/qat/state
up
# cat /sys/bus/pci/devices/<BDF>/qat/cfg_services
sym;asym
# echo down > /sys/bus/pci/devices/<BDF>/qat/state
# echo dc > /sys/bus/pci/devices/<BDF>/qat/cfg_services
# echo up > /sys/bus/pci/devices/<BDF>/qat/state
# cat /sys/bus/pci/devices/<BDF>/qat/cfg_services
dc
This attribute is only available for qat_4xxx devices.
What: /sys/bus/pci/devices/<BDF>/qat/pm_idle_enabled
Date: June 2023
KernelVersion: 6.5
Contact: [email protected]
Description: (RW) This configuration option provides a way to force the device into remaining in
the MAX power state.
If idle support is enabled the device will transition to the `MIN` power state when
idle, otherwise will stay in the MAX power state.
Write to the file to enable or disable idle support.
The values are:
* 0: idle support is disabled
* 1: idle support is enabled
Default value is 1.
It is possible to set the pm_idle_enabled value only if the device
is in the `down` state (see /sys/bus/pci/devices/<BDF>/qat/state)
The following example shows how to change the pm_idle_enabled of
a device::
# cat /sys/bus/pci/devices/<BDF>/qat/state
up
# cat /sys/bus/pci/devices/<BDF>/qat/pm_idle_enabled
1
# echo down > /sys/bus/pci/devices/<BDF>/qat/state
# echo 0 > /sys/bus/pci/devices/<BDF>/qat/pm_idle_enabled
# echo up > /sys/bus/pci/devices/<BDF>/qat/state
# cat /sys/bus/pci/devices/<BDF>/qat/pm_idle_enabled
0
This attribute is only available for qat_4xxx devices.