CCE-314 , CCE-416

The main motive of this project is to design and implement a secure Telecommunication Company Network which has two floors of departments. The company will be using IP address: 10.20.0.0/16 for WLAN, 192.168.10.0/24 for LAN, 172.16.10.0/24 for Voice, 10.10.10.0/28 for DMZ and 197.200.100.0 for public addresses.

6th semester Computer Network Laborotory (CSE-386) course's lab manual

The primary aim of this project is to develop network infrastructure of a SOHO (Small Office Home Office) Network using Cisco Packet Tracer. This involves the creation of segmented VLANs to manage traffic effectively, configuring routers to enable inter-VLAN communication and integrating DHCP services for automatically IP address allocation.

The motivation of this project is to design a Hospital System Network and meet all the requirements of infrastructure. All the departments will be on a separate network segment and Access Control Lists and Virtual Private Network (VPN) is also implemented to enable secure communication considering security and network performance factors.

The aim of this project is to develop a robust and efficient network infrastructure customized to meet the specific demands of a University Campus Network with the configuration of SSH for secure remote access and RIPv2 as the routing protocol.

Network Modeling of double story building of University with labs, staff computers and printers

This project designs a network for Radeon Company Ltd. using Cisco Packet Tracer. It includes VLANs, DHCP for dynamic IPs, OSPF routing, SSH for secure access, wireless networks, and port security for safety.

This repository contains a Cisco Packet Tracer lab on configuring VLANs, trunking, and inter-VLAN routing using the router-on-a-stick method. It includes steps for switch and router configuration, along with connectivity verification.

This project demonstrates the skills I acquired during the CCNA 2 course I took in Spring 2024. It covers key networking concepts such as subnetting, VLAN configuration, inter-VLAN routing, IP routing, and DHCP setup using Cisco Packet Tracer.

This project demonstrates the configuration of Inter-VLAN Routing using Cisco Packet Tracer. It covers VLAN creation, router-on-a-stick setup, and subnetting using VLSM to enable communication between devices in different VLANs.

Configuration of inter-VLAN routing, point-to-point Layer 3 connections, and testing connectivity between VLANs and the internet using Cisco Packet Tracer.