diff --git a/Documentation/TestReport/Team8_TestReportMark.pdf b/Documentation/TestReport/Team8_TestReportMark.pdf
new file mode 100644
index 00000000..7081b734
Binary files /dev/null and b/Documentation/TestReport/Team8_TestReportMark.pdf differ
diff --git a/Documentation/TestReport/TestReport.pdf b/Documentation/TestReport/TestReport.pdf
index f86c478e..3bdc85d9 100644
Binary files a/Documentation/TestReport/TestReport.pdf and b/Documentation/TestReport/TestReport.pdf differ
diff --git a/Documentation/TestReport/TestReport.tex b/Documentation/TestReport/TestReport.tex
index 2c7c78b6..dff5381a 100644
--- a/Documentation/TestReport/TestReport.tex
+++ b/Documentation/TestReport/TestReport.tex
@@ -140,6 +140,7 @@ \section*{Definitions and Acronyms} % Matt
 \end{tabularx}
 \end{table}
 
+\ds{Your table is in the wrong place for this heading. You might want to add some text in before the table (referencing it) to avoid an empty, floating heading.}
 
 % =============================== Section =============================== % ------------------------- Rob
 \section{Introduction}
@@ -156,6 +157,8 @@ \subsection{Scope of the Testing}
 A basic knowledge of programming concepts and command-line tools is assumed, as well as familiarity with GEANT4.
 
 \subsection{Organization}
+\ds{Use refs for your section/figure/table numbering. That way they'll be auto-generated.}
+
 In Section 4 we provide an introduction to this report. Section 5 describes the test cases which are carried out on each function. Section 6 describes system test cases that were carried out by our team. In section 7 traceability matrices to requirements and modules are documented. Section 8 provides a summary of changes made in response to the testing results.
 
 \subsection{Usability Testing}
@@ -226,6 +229,8 @@ \subsection{Definition of Variables Used for Unit Testing}
 \end{tabular}
 \end{table}
 
+\ds{Where do you define your tolerance?}
+
 \subsection{void Init(istream \& aDataFile, G4int total, G4double ux, G4double uy)} 
 	Initializes the data in the current vector with \texttt{total} data points from \texttt{aDataFile}. Each data
 	point is multiplied by factor \texttt{ux} for the x-value and \texttt{uy} for the y-value.
@@ -280,7 +285,8 @@ \subsection{G4ParticleHPVector \& operator = (const G4ParticleHPVector \& right)
 		\refstepcounter{TestCounter}\arabic{TestCounter}\label{OperatorEquals_0} & Current vector\\
 		\bottomrule
 		\end{tabular}
-		\end{table}
+		\end{table}	
+		
 	\subsubsection{Results}
 		\begin{table}[h]
 		\centering
@@ -293,6 +299,10 @@ \subsection{G4ParticleHPVector \& operator = (const G4ParticleHPVector \& right)
 		\bottomrule
 		\end{tabular}
 		\end{table}
+
+\ds{The way this is written is very hard to understand. Can you explain it in more depth? 
+Or give a brief rundown of the system state, what the input to each parameter is, etc.?}		
+		
 	\subsubsection{Performance}	
 		This method is not computationally heavy, so performance data was not included.
 		
@@ -1086,6 +1096,12 @@ \subsection{G4double Get50percentBorder()}% Test Cases Done
 		\bottomrule
 		\end{tabular}
 		\end{table}
+		
+\ds{As an overall note: Please give each test case its own explicit explanation. 
+Seeing tables that say ``Test\#XX -- -- -- --" is not very intuitive or helpful. 
+Instead try something like ``Test\#XX (as a heading) then explain that 
+parameter1=-1, parameter2=xyz ..." 
+and explain the expected vs. actual output.}		
 
 	\subsubsection{Performance}
 		\begin{figure}[H]
@@ -1094,6 +1110,8 @@ \subsection{G4double Get50percentBorder()}% Test Cases Done
     	\includegraphics[width=0.7\textwidth]{get50_bar.png}
     	\includegraphics[width=0.7\textwidth]{get50_line.png}
     	\end{figure}
+
+		
 		
 % =============================== Section =============================== %
 \section{System Tests}
@@ -1151,6 +1169,8 @@ \subsection{Summary of System Tests}
 \end{table}
 \end{center}
 
+\ds{A boolean summary of whether the outputs were accurate (ie. ``Output is the same as CPU GEANT4" -- true/false could be useful instead of your current setup).}
+
 \subsection{System Test - Water, 2000 events}
 This test runs the Hadr04 example on both the GPU and the CPU. The code for the Hadr04 example is bundled with the GEANT4 installation.
 	\subsubsection{Accuracy}
@@ -1495,4 +1515,6 @@ \section{Changes after Testing}
 Aside from the handling of edge cases with if guards, there was one more significant change required to get the unit tests to pass. An important control flow statement in \texttt{GetXSec(e,min)} was supposed to branch if the difference between two values was below a certain threshold. Our implementation was missing a call to get the absolute value for this difference, and as such was returning the wrong result in cases where the second value was larger than the first.\\
 
 In terms of performance, some performance testing had been done prior to the development of the unit testing system. That profiling data led us to reimplement nearly every function on the GPU using a hybrid approach wherein the data values are stored in both GPU and CPU memory, are modified mainly on the GPU and then the version in CPU memory is updated only when required. This gave very large performance improvements, with the GPU code going from ~4.5X slower to ~1.2X slower for the Hadr04 example. Further performance tuning is planned for the future based on the results from individual unit tests.
+
+
 \end{document}