ReMOVE Lite is a utility module for recording and replaying movements of any parameter on any module in Rack. It supports up to 8 recorded sequences, various sampling rates, different recording-modes, a phase-input for directly controlling the playback and more settings. Though it is not its main purpose ReMOVE can be also used as a CV recorder. All ports of ReMOVE Lite are monophonic.
A really epic tutorial video from Omri Cohen showcasing ReMOVE Lite.
Another fabulous tutorial video from Artem Leonov using 8 instances of ReMOVE Lite with MIDI mapping.
Parameter mapping is done by activating the mapping mode by mouse click on the display on the top. While showing "Mapping..." click on any parameter of any module in Rack to bind the module. You can unbind the parameter using the context menu of the display. Also, you can "locate" the module and mapped parameter if you got lost inside your rack.
The module has a built-in storage for 64k samples. At full audio samplerate of 48kHz this storage corresponds to 1.3 seconds of recording. Such high precision is not needed for parameter automation, so ReMOVE Lite allows a samplerate of 2kHz at most. The lowest setting is 15Hz and gives you 15 samples per second which can still be ok for slowly changing parameters or low timing accuracy. Be careful using higher sample rates: Recorded sequences are stored inside the patchfile and these can get quite huge if several modules are used (to be precise: 64k samples each 4 byte size plus overhead for storing in JSON format, results in 2-3MB).
ReMOVE Lite can be configured to record 1, 2, 4 or 8 different sequences. The maximum length for each sequence is evenly divided, so you get 1/8 of the available recording time when using 8 sequences. The available recording time is shown in the context menu-option and in the display as soon as a recording starts. Be careful: Changing the number of sequences resets all recorded automation data.
Both settings for samplerate and number of sequences can be found in the context menu.
There are four different recording modes available, changed by context menu option:
- Touch-Mode (Default): Triggering the red REC button by mouse or through REC-port arms recording. Actual recording of automation data starts on first mouse click ("touch") on the mapped parameter and holds on as long the button is pressed. Recording stops when the mouse button is released.
- Move-Mode: Similar to Touch-Mode recording is armed when clicking on REC. Recording starts on the first change of the mapped parameter, which happens not necessarily on the mouse down event. Releasing the mouse button ends the recording and the stored automation data will be trimmed on the end to the last change of value. This way the sequence starts on first change and ends on the last change.
- Manual-Mode: This mode starts the recording as soon as the red REC-button is pressed. Manual-mode is especially useful when triggering using REC-input.
- Sample & Hold-Mode (added in v1.0.4): This mode records exactly one sample of the value of the mapped parameter. This can be useful for sequencing a parameter value in combination with play mode "Loop Sequences".
Recording is only possible when a parameter is mapped, even when using the IN-port.
Some modes for playback have been implemented:
- Loop (Default): playback loops through the selected sequence.
- Oneshot: the sequence is played once and must be retriggered by RESET.
- Ping Pong: the sequence loops, first played forward and then backward.
- Sequence loop (added in v1.0.4): playback loops through all sequences.
- Sequence random (added in v1.1.0): playback walks randomly through all sequences.
You can use the PHASE-input if you want a different playback speed or a completely different playback pattern. Added in v1.3.0: Additionally you change the SMTH-parameter for smoothing the recorded curve and for value jumps on sequence end or sequence change.
The SEQ#-input allows you to select sequences by CV. There are three different modes available:
- 0..10V (Default): The range is split evenly by 8. 0-1.25V selects sequence 1, 1.25-2.5V sequence 2 and so on.
- C4-G4: Keyboard mode, C4 triggers sequence 1, G4 triggers sequence 8.
- Trigger: When a trigger is received the module advances to the next sequence.
The input labeled PHASE accepts 0-10V and allows controlling the playhead directly: Voltages from 0 to 10V are mapped to the length of the sequence. Using an LFO's unipolar saw output or a clock with phase output like ZZC's Clock-module the playback can be synced to sequencers and you get behavior of Loop-mode, an LFO with triangle-output gives you ping pong-playback. Obviously multiple instances of the module can also be synchronized this way.
The ports RUN and RESET and their buttons are disabled and can't be used as long a cable is connected to PHASE. From v1.0.4 on this is signaled by red LEDs next to the ports.
Same behaviour as most sequencers: RUN can be configured for playback as "high" or "trigger", a trigger on RESET restarts the currently selected playback mode from the beginning. Inputs are Disabled when currently recording or if PHASE-input is connected.
Using ReMOVE in a sequencer scenario that records a random source and plays it back multiple times.
REC-input is used for starting and stopping recordings by CV trigger. Be aware that a trigger with record modes "Touch" and "Move" arms the recording only.
The REC-output can be configured as "gate" or "trigger" everytime a recording starts or stops.
The port labeled IN accepts 0..10V or -5..5V (configuration option is found in the context menu) and can be used to record parameter automation data from any external CV source. All parameter movements are ignored during a recording when a cable is connected to this port.
The OUT-port outputs a voltage for the recorded sequence. It can be configured for ranges 0..10V or -5..5V. Since v1.0.4 it outputs also CV while recording for monitoring purposes. Since v1.3.0 there is a third option EOC on the context-menu for outputting a trigger on the OUT-port every time the playback reaches the end of a sequence.
- When duplicating an instance of the module all recorded sequences are also duplicated.
- The module can be re-mapped to another parameter after a sequence has been recorded.
- Changing the sampling rate of the module will prevail all recorded data and the playback-speed will be higher or slower.
- "Randomization" of the module generates some random automation curves (added in v1.0.5).
- A simple compression is implemented to reduce the size of the patchfile.
ReMOVE Lite was added in v1.0.2 of PackOne.