Most of the panel's buttons have 3 or 4 states.
| State | Button State Value | ASCII value |
|---|---|---|
| Up | 0x30 | 0 |
| Down | 0x31 | 1 |
| Long Press | 0x33 | 3 |
| Hold | 0x34 | 4 |
All button presses or commands are always suffixed with 0x0D or ASCII: \r (carriage return), but not necessarily sequentially; depends on the size of the command.
Buttons without a long press state will mention this in the comment section below.
A button press looks like this: Button Byte Value:Button State Value Carriage Return
| Button | Byte Value | ASCII value | Comment |
|---|---|---|---|
| CL | 0x4D | M | |
| XIT | 0x4F | O | |
| RIT | 0x4E | N | |
| TF-SET | 0x50 | Q | TF-SET (Left button) Down |
| TF-SET | 0x51 | P | TF-SET (Right button) |
| Multi | 0x54 | T | T01 (right) TFF (left) |
| IF Shift | 0x58 | X | X0001 - X03FE |
| QMI | 0x4B | K | M.IN |
| QMR | 0x4C | L | M>VFO |
| A/B | 0x4A | J | M/V |
| A=B | 0x49 | I | Split |
| Menu | 0x47 | G | F.Lock |
| MHz | 0x48 | H | M.STP |
| FIL | 0x42 | B | NAR |
| BC | 0x43 | C | CW.T in CW mode. |
| DNL | 0x40 | @ | DNL Level |
| NR | 0x41 | A | NR level |
| Fine | 0x44 | D | STEP |
| CH3 | 0x36 | 6 | 3 REC |
| KEY | 0x39 | 9 | 6 DELAY |
| PROC | 0x3B | ; | 9 |
| ENT | 0x3F | ? | |
| CH2 | 0x35 | 5 | 2 REC |
| MIC | 0x38 | 8 | 5 RF.G |
| VOX | 0x3C | < | 8 |
| AGC | 0x3E | > | 0 OFF |
| CH1 | 0x34 | 4 | 1 REC |
| PWR | 0x37 | 7 | 4 TX MONI |
| NB/T | 0x3A | : | 7 |
| MTR | 0x3D | = | CLR |
| On/Off | 0x30 | 0 | |
| PF | 0x32 | 2 | |
| ATT/PRE | 0x21 | ! | ANT 1/2 |
| AT | 0x33 | 3 | |
| On / Off | 0x30 | 0 | No short press but 02 is used to "reconnect" panel / radio |