You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Facet hung issuing corrections to Rtk2go and Emlid simultaneously
facet v4.1 06/14/24
I was working today with Facet in base mode for a little over 5 hours, issuing corrections to Rtk2go and Emlid at the same time. I also saved the ubx file on the SD card and when that period of 5 hours of work more or less arrived, it crashed. It stopped issuing corrections, the screen remained frozen with a fixed rtcm number without advancing.
It didn't turn off normally and I had to hold the power button for 20 seconds and it turned off.
Could it be a ram problem due to the double emission and saving of the ubx file on the SD card?
The Wi-Fi in the work area is excellent and the battery was over 60 percent.
I leave the problem to your analysis.
greetings
The text was updated successfully, but these errors were encountered:
I ran into the same issue on a very hot day here in Los Angeles, temps passing 100*F I removed the rubber sleeve to reduce the heat being absorbed by the Facet. I finally decided to cover the unit with a white plastic shopping bag, just covering it and poking a hole in the top to vent the heat.
Facet hung issuing corrections to Rtk2go and Emlid simultaneously
facet v4.1 06/14/24
I was working today with Facet in base mode for a little over 5 hours, issuing corrections to Rtk2go and Emlid at the same time. I also saved the ubx file on the SD card and when that period of 5 hours of work more or less arrived, it crashed. It stopped issuing corrections, the screen remained frozen with a fixed rtcm number without advancing.
It didn't turn off normally and I had to hold the power button for 20 seconds and it turned off.
Could it be a ram problem due to the double emission and saving of the ubx file on the SD card?
The Wi-Fi in the work area is excellent and the battery was over 60 percent.
I leave the problem to your analysis.
greetings
The text was updated successfully, but these errors were encountered: