From 793e255bf3afeb0d7f36880d37c7c65da18223df Mon Sep 17 00:00:00 2001
From: BYGX-wcr <wcr@live.cn>
Date: Mon, 2 Dec 2024 15:21:55 -0800
Subject: [PATCH] add arg_len back for completeness and add one more UT case
---
doc/srv6/srv6_static_config_hld.md | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/doc/srv6/srv6_static_config_hld.md b/doc/srv6/srv6_static_config_hld.md
index a8933c1962..27f0b41a20 100644
--- a/doc/srv6/srv6_static_config_hld.md
+++ b/doc/srv6/srv6_static_config_hld.md
@@ -32,11 +32,9 @@
| -------- | ----------------------------------------- |
| BGP | Border Gateway Protocol |
| SID | Segment Identifier |
-| SRH | Segment Routing Header |
| SRv6 | Segment Routing IPv6 |
| SDN | Software Defined Network |
| uSID | Micro Segment |
-| VNI | VXLAN Network Identifier |
| VRF | Virtual Routing and Forwarding |
# About this Manual
@@ -101,9 +99,10 @@ key = SRV6_MY_SID_TABLE|ipv6address
block_len = blen ; bit length of block portion in address, default 32
node_len = nlen ; bit length of node ID portion in address, default 16
func_len = flen ; bit length of function portion in address, default 16
-action = behavior ; behaviors defined for local SID
-vrf = VRF_TABLE.key ; VRF name for END.DT46, can be empty
-adj = address, ; Optional, list of adjacencies for END.X
+arg_len = alen ; bit length of argument portion in address, default 0
+action = behavior ; behaviors defined for the SID
+vrf = VRF_TABLE.key ; Optional, VRF name for decapsulation actions
+adj = address, ; Optional, list of adjacencies for cross-connect actions
For example:
"SRV6_MY_SID_TABLE" : {
@@ -146,6 +145,7 @@ module: sonic-srv6-config
| +--rw block_len? uint16
| +--rw node_len? uint16
| +--rw func_len? uint16
+ | +--rw arg_len? uint16
| +--rw action? enumeration
| +--rw vrf? -> /vrf:sonic-vrf/VRF/VRF_LIST/name
| +--rw adj* inet:ipv6-address
@@ -160,6 +160,7 @@ module: sonic-srv6-config
|add config for a SID with uDT46 action without VRF parameter in CONFIG_DB | verify the opcode config entry is created in FRR config with default VRF|
|add config for a SID with uA action associated with two neighbors in CONFIG_DB | verify the opcode config entry is created in FRR config with correct parameters|
|(Negative case) add config for a SID without action in CONFIG_DB | verify that the configuration did not get into FRR config |
+|(Negative case) add config for a decap SID with an invalid VRF name in CONFIG_DB | verify that the configuration did not get into FRR config |
|delete config for a SID with uN action in CONFIG_DB | verify the locator config entry is deleted in FRR config|
|delete config for a SID with uDT46 action associated with VRF-1001 in CONFIG_DB | verify the opcode config entry for the uDT46 action is deleted in FRR config|
|delete config for a SID with uA action in CONFIG_DB | verify the opcode config entry for the uA action is deleted in FRR config|