Skip to content

Latest commit

 

History

History
86 lines (65 loc) · 2.9 KB

README.md

File metadata and controls

86 lines (65 loc) · 2.9 KB
Raw

opencog_rpi

Opencog Cross Compile Toolchain for Raspberry Pi3

This repo contains the compiler, needed libraries and script to cross compile and install opencog on a RPI3 board.

You only need to download the octool_rpi.sh script in order to use it. The script downloads the other files you see here to specific directories on your machine when they are required for cross-compiling.

If what you need is only to install opencog on a RPI board running Raspbian, you should just get this script and run octool_rpi.sh -do

Usage

The octool_rpi.sh script handles most of the work for both cross compiling on a fancy machine and installing on a RPI running raspbian.

The switches to the script:

Usage: octool_rpi.sh OPTION
Tool for installing necessary packages and preparing environment
for OpenCog on a Raspberry PI computer running Raspbian OS.
  -d   Install base/system dependancies.
  -o   Install OpenCog (precompilled: may be outdated)
  -t   Download and Install Cross-Compilling Toolchain
  -c   Cross Compile OpenCog (Run on PC!)
  -s   Cross Compile for Raspbian Stretch (boost 1.62)
  -v   Verbose output
  -h   This help message

RPI Options

The first two options are meant to run on a RPI board running Raspbian.

To install the base dependancies of opencog on the RPI, use the -d switch.

To install opencog with a debian package of pre-compiled binaries use the -o switch. This downloads a .deb package and installs it on the system. It assumes that you have the base dependancies installed so it's best to run the following to first install the dependancies and then opencog.

    ./octool_rpi.sh -do

PC Options

The following two options are meant to run on a PC that is able to compile opencog efficiently.

The need for this cross compiler obviously is that it's very time consuming to compile opencog on the RPI board.

On PC, you should first download and setup the cross compiler toolchain. This is a directory of files that contain the necessary include files and ARM compiled libraries that will be needed during compilation and linking.

The option -t downloads and arranges the files neeeded for cross compiling opencog. It gets the compiler, needed libraries and the opencog source code including cogutil, atomspace and opencog.

The -c option, assumes the files are present on the expected folders of the PC. It will use the downloaded compiler to cross compile opencog for RPI.

If running the script for the first time, use the switches:

	./octool_rpi.sh -tc

If compiling for raspbian Stretch then the -s option can be used. By default the build is for jessie.

        ./octool_rpi.sh -tcs

This will download the cross compiler toolchain and compile opencog for RPI. It will create a Debian package which you can easily take to your RPI board and install. But remember to have the base dependancies installed for the RPI first.