Skip to content

Latest commit

 

History

History
executable file
·
97 lines (60 loc) · 2.96 KB

vrs15_0_0.md

File metadata and controls

executable file
·
97 lines (60 loc) · 2.96 KB
layout title
documentation
VRS15 - ZWave

{% include base.html %}

VRS15 Scene Capable Push On/Off

This describes the Z-Wave device VRS15, manufactured by Leviton with the thing type UID of leviton_vrs15_00_000.

The device is in the category of Wall Switch, defining Any device attached to the wall that controls a binary status of something, for ex. a light switch.

VRS15 product image

The VRS15 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.

Overview

Vizia-RF + 15A Relay Switch for Single Pole/3-Way

Inclusion Information

  1. Install VRS15
  2. Place controller in inclusion mode
  3. Press on/off paddle on VRS15 to include

Exclusion Information

  1. Place controller in exclusion mode
  2. Press on/off paddle on VRS15 to exclude

Channels

The following table summarises the channels available for the VRS15 -:

Channel Name Channel ID Channel Type Category Item Type
Switch switch_binary switch_binary Switch Switch
Scene Number scene_number scene_number Number

Switch

Switch the power on and off.

The switch_binary channel is of type switch_binary and supports the Switch item and is in the Switch category.

Scene Number

Triggers when a scene button is pressed.

The scene_number channel is of type scene_number and supports the Number item.

Device Configuration

The device has no configuration parameters defined.

Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The VRS15 supports 1 association group.

Group 1: Group 1

Association group 1 supports 5 nodes.

Technical Information

Endpoints

Endpoint 0

Command Class Comment
COMMAND_CLASS_NO_OPERATION_V1
COMMAND_CLASS_BASIC_V1
COMMAND_CLASS_SWITCH_BINARY_V1
COMMAND_CLASS_SWITCH_ALL_V1
COMMAND_CLASS_SCENE_ACTIVATION_V1 Linked to BASIC
COMMAND_CLASS_SCENE_ACTUATOR_CONF_V1
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1
COMMAND_CLASS_POWERLEVEL_V1
COMMAND_CLASS_NODE_NAMING_V1
COMMAND_CLASS_ASSOCIATION_V1
COMMAND_CLASS_VERSION_V1
COMMAND_CLASS_MANUFACTURER_PROPRIETARY_V1

Documentation Links


Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.