Skip to content

Latest commit

 

History

History
executable file
·
96 lines (59 loc) · 3.42 KB

vrpa1_0_0.md

File metadata and controls

executable file
·
96 lines (59 loc) · 3.42 KB
Raw
layout title
documentation
VRPA1 - ZWave

{% include base.html %}

VRPA1 Vizia RF + Scene Capable Plug-in Module

This describes the Z-Wave device VRPA1, manufactured by Leviton with the thing type UID of leviton_vrpa1_00_000.

The device is in the category of Power Outlet, defining Small devices to be plugged into a power socket in a wall which stick there.

VRPA1 product image

The VRPA1 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.

Overview

The Vizia RF + Scene Capable Plug-in Appliance Module (VRPA1-1LW) is ideal for any residential setting where remote ON/OFF switching of appliances, motor loads up to 1/2 HP, or freestanding lights, including Incandescent, Magnetic Low Voltage, Fluorescent and Compact Fluorescent loads is needed. Typical applications include switching of fluorescent lamps, portable fans, kitchen appliances, indoor fountains and more. The Vizia RF + Scene Capable Plug-in Appliance Module also allows users to incorporate small appliances into scene and zone home control applications. 

Inclusion Information

  1. Plug in VRPA1
  2. Place controller in inclusion mode
  3. Press button on front of VRPA1

Exclusion Information

  1. Place controller in exclusion mode
  2. Press button on front of VRPA1

Channels

The following table summarises the channels available for the VRPA1 -:

Channel Name Channel ID Channel Type Category Item Type
Switch switch_binary switch_binary Switch Switch
Scene Number scene_number scene_number Number

Switch

Switch the power on and off.

The switch_binary channel is of type switch_binary and supports the Switch item and is in the Switch category.

Scene Number

Triggers when a scene button is pressed.

The scene_number channel is of type scene_number and supports the Number item.

Device Configuration

The device has no configuration parameters defined.

Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The VRPA1 supports 1 association group.

Group 1: Unknown

Association group 1 supports 254 nodes.

Technical Information

Endpoints

Endpoint 0

Command Class Comment
COMMAND_CLASS_NO_OPERATION_V1
COMMAND_CLASS_BASIC_V1
COMMAND_CLASS_SWITCH_BINARY_V1
COMMAND_CLASS_SWITCH_ALL_V1
COMMAND_CLASS_SCENE_ACTIVATION_V1
COMMAND_CLASS_SCENE_ACTUATOR_CONF_V1
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1
COMMAND_CLASS_POWERLEVEL_V1
COMMAND_CLASS_NODE_NAMING_V1
COMMAND_CLASS_ASSOCIATION_V1
COMMAND_CLASS_VERSION_V1

Documentation Links

Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.