Skip to content

Latest commit

 

History

History
executable file
·
237 lines (153 loc) · 7.35 KB

dz1kd_0_0.md

File metadata and controls

executable file
·
237 lines (153 loc) · 7.35 KB
Raw
layout title
documentation
DZ1KD - ZWave

{% include base.html %}

DZ1KD 1000W Dimmer

This describes the Z-Wave device DZ1KD, manufactured by Leviton with the thing type UID of leviton_dz1kd_00_000.

The device is in the category of Wall Switch, defining Any device attached to the wall that controls a binary status of something, for ex. a light switch.

DZ1KD product image

The DZ1KD supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.

Overview

Universal Incandescent, LED, CFL, Magnetic Low Voltage or Fluorescent Dimmer

Inclusion Information

  • Enter Programming Mode by holding the top of the paddle for 7 seconds, the Locator LED will blink amber.
  • Tap the top of the paddle one time.
  • The Locator LED will quickly flash green.
  • The Decora SmartTM Z-Wave® device is ready to learn into the Z-Wave network.
  • Follow directions in the Z-Wave® controller to complete the adding process.
  • Upon successful addition to network the LED will turn off and then blink green 3 times.
  • If the adding process is not successful the LED will flash red 3 times.

Exclusion Information

  • Enter Programming Mode by holding the top of the paddle for 7 seconds, the Locator LED will blink amber.
  • Follow directions in the Z-Wave® controller to enter exclusion mode
  • Tap the top of the paddle one time. The Locator LED will quickly flash green.
  • The Z-Wave® controller will exclude the Decora SmartTM device
  • The Z-Wave® controller will confirm successful exclusion from the network.

Channels

The following table summarises the channels available for the DZ1KD -:

Channel Name Channel ID Channel Type Category Item Type
Dimmer switch_dimmer switch_dimmer DimmableLight Dimmer
Scene Number scene_number scene_number Number

Dimmer

The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.

The switch_dimmer channel is of type switch_dimmer and supports the Dimmer item and is in the DimmableLight category.

Scene Number

Triggers when a scene button is pressed.

The scene_number channel is of type scene_number and supports the Number item.

Device Configuration

The following table provides a summary of the 8 configuration parameters available in the DZ1KD. Detailed information on each parameter can be found in the sections below.

Param Name Description
1 Fade On Time Fade on time
2 Fade Off Time Fade off time
3 Minimum Light Level Minimum light level
4 Maximum Light Level Maximum light level
5 Preset Light Level Preset light level
6 LED Dim Level Indicator Timeout LED dim level indicator timeout
7 Locator LED Status Locator LED status
8 Load Type Load type
Switch All Mode Set the mode for the switch when receiving SWITCH ALL commands

Parameter 1: Fade On Time

Fade on time

  • 0: Instant on
  • 1 to 127: 1-127 seconds
  • 128 to 253: 1-126 minutes Values in the range 0 to 253 may be set.

The manufacturer defined default value is 2.

This parameter has the configuration ID config_1_1 and is of type INTEGER.

Parameter 2: Fade Off Time

Fade off time

  • 0: Instant off
  • 1 to 127: 1-127 seconds
  • 128 to 253: 1-126 minutes Values in the range 0 to 253 may be set.

The manufacturer defined default value is 2.

This parameter has the configuration ID config_2_1 and is of type INTEGER.

Parameter 3: Minimum Light Level

Minimum light level

Values in the range 0 to 100 may be set.

The manufacturer defined default value is 10.

This parameter has the configuration ID config_3_1 and is of type INTEGER.

Parameter 4: Maximum Light Level

Maximum light level

Values in the range 0 to 100 may be set.

The manufacturer defined default value is 100.

This parameter has the configuration ID config_4_1 and is of type INTEGER.

Parameter 5: Preset Light Level

Preset light level

  • 0: Last dim level
  • 1 to 100: Level Values in the range 0 to 100 may be set.

The manufacturer defined default value is 0.

This parameter has the configuration ID config_5_1 and is of type INTEGER.

Parameter 6: LED Dim Level Indicator Timeout

LED dim level indicator timeout

  • 0: LED indicators off
  • 1 to 254: Timeout in seconds
  • 255: Always on Values in the range 0 to 255 may be set.

The manufacturer defined default value is 3.

This parameter has the configuration ID config_6_1 and is of type INTEGER.

Parameter 7: Locator LED Status

Locator LED status

  • 0: LED off
  • 254: Status mode
  • 255: Locator mode Values in the range 0 to 255 may be set.

The manufacturer defined default value is 255.

This parameter has the configuration ID config_7_1 and is of type INTEGER.

Parameter 8: Load Type

Load type

  • 0: Incandescent
  • 1: LED
  • 2: CFL Values in the range 0 to 2 may be set.

The manufacturer defined default value is 0.

This parameter has the configuration ID config_8_1 and is of type INTEGER.

Switch All Mode

Set the mode for the switch when receiving SWITCH ALL commands.

The following option values may be configured -:

Value Description
0 Exclude from All On and All Off groups
1 Include in All On group
2 Include in All Off group
255 Include in All On and All Off groups

This parameter has the configuration ID switchall_mode and is of type INTEGER.

Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The DZ1KD supports 1 association group.

Group 1: Group 1

Z-Wave Plus Lifeline A NOTIFICATION frame is sent to the nodes in this association group when a Lifeline event occurs.

Association group 1 supports 5 nodes.

Technical Information

Endpoints

Endpoint 0

Command Class Comment
COMMAND_CLASS_NO_OPERATION_V1
COMMAND_CLASS_BASIC_V1
COMMAND_CLASS_SWITCH_MULTILEVEL_V3 Linked to BASIC
COMMAND_CLASS_SWITCH_ALL_V1
COMMAND_CLASS_SCENE_ACTIVATION_V1
COMMAND_CLASS_SCENE_ACTUATOR_CONF_V1
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1
COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1
COMMAND_CLASS_ZWAVEPLUS_INFO_V1
COMMAND_CLASS_CONFIGURATION_V1
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1
COMMAND_CLASS_POWERLEVEL_V1
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V1
COMMAND_CLASS_HAIL_V1
COMMAND_CLASS_ASSOCIATION_V2
COMMAND_CLASS_VERSION_V2

Documentation Links

Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.