| layout | title |
|---|---|
documentation |
KONOzw - ZWave |
{% include base.html %}
This describes the Z-Wave device KONOzw, manufactured by Johnson Controls with the thing type UID of johnson_konozw_00_000.
The device is in the category of HVAC, defining Air condition devices, Fans.
The KONOzw supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is unable to participate in the routing of data from other devices.
KONOzw is the smart hub thermostat made with you in mind. It seamlessly connects to many smart hubs and blends in or stands out with its interchangeable Décorsnap covers™. KONOzw makes it easier than ever to personalize your comfort, décor, and savings.
-
In HOME screen, press the knob once to enter the menu settings
-
Rotate the knob to select wireless symbol, then press the knob to enter the inclusion/exclusion menu
-
In the inclusion/exclusion menu, select ADD and press the knob to confirm
-
The device will begin the adding process
-
In HOME screen, press the knob once to enter the menu settings
-
Rotate the knob to select wireless symbol, then press the knob to enter the inclusion/exclusion menu
-
In the inclusion/exclusion menu, select RST and press the knob to confirm
-
The device will begin the removal process
The following table summarises the channels available for the KONOzw -:
| Channel Name | Channel ID | Channel Type | Category | Item Type |
|---|---|---|---|---|
| Sensor (temperature) | sensor_temperature | sensor_temperature | Temperature | Number:Temperature |
| Thermostat mode | thermostat_mode | thermostat_mode | Temperature | Number |
| Operating State | thermostat_state | thermostat_state | Temperature | Number |
| Setpoint (heating) | thermostat_setpoint | thermostat_setpoint | Heating | Number:Temperature |
| Setpoint (cooling) | thermostat_setpoint | thermostat_setpoint | Heating | Number:Temperature |
| Setpoint (auto changeover) | thermostat_setpoint | thermostat_setpoint | Heating | Number:Temperature |
| Setpoint (moist air) | thermostat_setpoint | thermostat_setpoint | Heating | Number:Temperature |
| Thermostat fan mode | thermostat_fanmode | thermostat_fanmode | ||
| Thermostat fan state | thermostat_fanstate | thermostat_fanstate | ||
| Alarm (power) | alarm_power | alarm_power | Energy | Switch |
| Battery Level | battery-level | system.battery_level | Battery | Number |
| Clock Time Offset | time_offset | time_offset | Time | Number |
Indicates the current temperature.
The sensor_temperature channel is of type sensor_temperature and supports the Number:Temperature item and is in the Temperature category.
Sets the thermostat.
The thermostat_mode channel is of type thermostat_mode and supports the Number item and is in the Temperature category.
The following state translation is provided for this channel to the Number item type -:
| Value | Label |
|---|---|
| 0 | Off |
| 1 | Heat |
| 2 | Cool |
| 3 | Auto |
| 4 | Aux Heat |
| 5 | Resume |
| 6 | Fan Only |
| 7 | Furnace |
| 8 | Dry Air |
| 9 | Moist Air |
| 10 | Auto Changeover |
| 11 | Heat Economy |
| 12 | Cool Economy |
| 13 | Away |
Sets the thermostat operating state.
The thermostat_state channel is of type thermostat_state and supports the Number item and is in the Temperature category.
The following state translation is provided for this channel to the Number item type -:
| Value | Label |
|---|---|
| 0 | Idle |
| 1 | Heating |
| 2 | Cooling |
| 3 | Fan Only |
| 4 | Pending Heat |
| 5 | Pending Cool |
| 6 | Vent / Economiser |
Sets the thermostat setpoint.
The thermostat_setpoint channel is of type thermostat_setpoint and supports the Number:Temperature item and is in the Heating category.
Sets the thermostat setpoint.
The thermostat_setpoint channel is of type thermostat_setpoint and supports the Number:Temperature item and is in the Heating category.
Sets the thermostat setpoint.
The thermostat_setpoint channel is of type thermostat_setpoint and supports the Number:Temperature item and is in the Heating category.
Sets the thermostat setpoint.
The thermostat_setpoint channel is of type thermostat_setpoint and supports the Number:Temperature item and is in the Heating category.
Channel type information on this channel is not found.
Channel type information on this channel is not found.
Indicates if a power alarm is triggered.
The alarm_power channel is of type alarm_power and supports the Switch item and is in the Energy category. This is a read only channel so will only be updated following state changes from the device.
The following state translation is provided for this channel to the Switch item type -:
| Value | Label |
|---|---|
| OFF | OK |
| ON | Alarm |
Represents the battery level as a percentage (0-100%). Bindings for things supporting battery level in a different format (e.g. 4 levels) should convert to a percentage to provide a consistent battery level reading.
The system.battery-level channel is of type system.battery-level and supports the Number item and is in the Battery category.
This channel provides the battery level as a percentage and also reflects the low battery warning state. If the battery state is in low battery warning state, this will read 0%.
Provides the current time difference for the devices time.
The time_offset channel is of type time_offset and supports the Number item and is in the Time category.
The following table provides a summary of the 14 configuration parameters available in the KONOzw. Detailed information on each parameter can be found in the sections below.
| Param | Name | Description |
|---|---|---|
| 1 | User Temperature Calibration | Step-size = 10 |
| 2 | Temperature Unit (C/F) | 0=C, 1=F |
| 3 | Available Control mode | 0=Auto Heat & Cool, 1=Heat Only, 2=Cool Only, 3=No Auto Heat & Cool, 4=Reserved |
| 4 | System Type | 0=Furnace Gas, 1=Furnace Electric, 2=Heat Pump, 3=Boiler no fan, 4=Reserved |
| 5 | Reversal valve Type in Heat Pump | 0=O-valve, 1=B-valve |
| 8 | Temperature Limit - Heat Max | Increment by 1F |
| 9 | Temperature Limit - Heat Min | Increment by 1F |
| 10 | Temperature Limit - Cool Max | Increment by 1F. Actual allowable range depends on the heat set point limit |
| 11 | Temperature Limit - Cool Min | Increment by 1F. Actual allowable range depends on the heat set point limit |
| 12 | Temperature Minimum Setpoint Deadband | 100 to 250, stepsize = 10 |
| 14 | Ambient Temperature Change Stepsize | 0.5F – 4F range with a step-size of 0.5F (0.25C) |
| 15 | Regular Ambient Temperature Reporting Interval | 1-24 hours |
| 16 | Regular Operating State Reporting Interval | 1-24 hours |
| 17 | Command Echo Enable | 0=Disable, 1=Enable |
Step-size = 10 Adjusts room temperature display to match a calibrated value. Values in the range -250 to 250 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_1_2 and is of type INTEGER.
0=C, 1=F
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | Celsius |
| 1 | Fahrenheit (Default) |
The manufacturer defined default value is 1 (Fahrenheit (Default)).
This parameter has the configuration ID config_2_1 and is of type INTEGER.
0=Auto Heat & Cool, 1=Heat Only, 2=Cool Only, 3=No Auto Heat & Cool, 4=Reserved
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | Heat and Cool, Auto (Default) |
| 1 | Heat Only |
| 2 | Cool Only |
| 3 | Heat and Cool, no Auto |
| 4 | Reserved |
The manufacturer defined default value is 0 (Heat and Cool, Auto (Default)).
This parameter has the configuration ID config_3_1 and is of type INTEGER.
0=Furnace Gas, 1=Furnace Electric, 2=Heat Pump, 3=Boiler no fan, 4=Reserved
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | Furnace Gas (Default) |
| 1 | Furnace Electric |
| 2 | Heat Pump |
| 3 | Boiler no fan |
| 4 | Reserved |
The manufacturer defined default value is 0 (Furnace Gas (Default)).
This parameter has the configuration ID config_4_1 and is of type INTEGER.
0=O-valve, 1=B-valve
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | O-valve (Default) |
| 1 | B-valve |
The manufacturer defined default value is 0 (O-valve (Default)).
This parameter has the configuration ID config_5_1 and is of type INTEGER.
Increment by 1F 60.00F-90.00F (16C-32C) Values in the range 60 to 90 may be set.
The manufacturer defined default value is 90.
This parameter has the configuration ID config_8_2 and is of type INTEGER.
Increment by 1F 45.00F-60.00F (7C-16C) Values in the range 45 to 60 may be set.
The manufacturer defined default value is 45.
This parameter has the configuration ID config_9_2 and is of type INTEGER.
Increment by 1F. Actual allowable range depends on the heat set point limit 60F-95F (16C-35C) Values in the range 60 to 95 may be set.
The manufacturer defined default value is 95.
This parameter has the configuration ID config_10_2 and is of type INTEGER.
Increment by 1F. Actual allowable range depends on the heat set point limit 50F-75F (10C-24C) Values in the range 50 to 75 may be set.
The manufacturer defined default value is 50.
This parameter has the configuration ID config_11_2 and is of type INTEGER.
100 to 250, stepsize = 10 The Dead Band is a temperature range in which neither COOL or HEAT turns on when in AUTO mode. Values in the range 100 to 250 may be set.
The manufacturer defined default value is 200.
This parameter has the configuration ID config_12_2 and is of type INTEGER.
0.5F – 4F range with a step-size of 0.5F (0.25C)
The following option values may be configured -:
| Value | Description |
|---|---|
| 50 | 0.5F (0.25C) |
| 100 | 1.0F (0.50C) |
| 150 | 1.5F (0.75C) |
| 200 | 2.0F (1.00C) |
| 250 | 2.5F (1.25C) |
| 300 | 3.0F (1.50C) |
| 350 | 3.5F (1.75C) |
| 400 | 4.0F (2.00C) |
The manufacturer defined default value is 50 (0.5F (0.25C)).
This parameter has the configuration ID config_14_2 and is of type INTEGER.
1-24 hours
Values in the range 1 to 24 may be set.
The manufacturer defined default value is 4.
This parameter has the configuration ID config_15_1 and is of type INTEGER.
1-24 hours
Values in the range 1 to 24 may be set.
The manufacturer defined default value is 4.
This parameter has the configuration ID config_16_1 and is of type INTEGER.
0=Disable, 1=Enable
Values in the range 0 to 1 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_17_1 and is of type INTEGER.
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The KONOzw supports 1 association group.
The Lifeline association group reports device status to a hub and is not designed to control other devices directly. When using the Lineline group with a hub, in most cases, only the lifeline group will need to be configured and normally the hub will perform this automatically during the device initialisation. Z-Wave Plus Lifeline
Association group 1 supports 5 nodes.
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | Linked to BASIC |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_APPLICATION_STATUS_V1 | |
| COMMAND_CLASS_SENSOR_MULTILEVEL_V7 | |
| COMMAND_CLASS_THERMOSTAT_MODE_V1 | |
| COMMAND_CLASS_THERMOSTAT_OPERATING_STATE_V1 | |
| COMMAND_CLASS_THERMOSTAT_SETPOINT_V1 | |
| COMMAND_CLASS_THERMOSTAT_FAN_MODE_V1 | |
| COMMAND_CLASS_THERMOSTAT_FAN_STATE_V1 | |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1 | |
| COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1 | |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1 | |
| COMMAND_CLASS_CONFIGURATION_V1 | |
| COMMAND_CLASS_ALARM_V4 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_POWERLEVEL_V1 | |
| COMMAND_CLASS_PROTECTION_V2 | |
| COMMAND_CLASS_FIRMWARE_UPDATE_MD_V1 | |
| COMMAND_CLASS_BATTERY_V1 | |
| COMMAND_CLASS_CLOCK_V1 | |
| COMMAND_CLASS_ASSOCIATION_V2 | |
| COMMAND_CLASS_VERSION_V2 | |
| COMMAND_CLASS_SECURITY_V1 |
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.