| layout | title |
|---|---|
documentation |
LZW41 - ZWave |
{% include base.html %}
This describes the Z-Wave device LZW41, manufactured by Inovelli with the thing type UID of inovelli_lzw41_00_000.
The device is in the category of Light Bulb, defining Devices that illuminate something, such as bulbs, etc..
The LZW41 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.
Full range of cool or warm white, 806 lumens, and only 9.5W, this bulb will definitely add some brightness to your life.
- With the bulb powered off, start the inclusion process and turn on the bulb (ie: power it on) and the bulb will flash twice (2x) indicating it’s in the inclusion mode
- If the bulb was included successfully, it will blink one more time. If it was not included successfully, you may have to run an exclusion. If there’s still issues, please ensure your bulb is within range
- With the power off to the bulb, start the exclusion process on your HUB/Gateway
- Then, turn the power on to the bulb and it will flash 2x, followed by a single flash if successful
The following table summarises the channels available for the LZW41 -:
| Channel Name | Channel ID | Channel Type | Category | Item Type |
|---|---|---|---|---|
| Dimmer | switch_dimmer | switch_dimmer | DimmableLight | Dimmer |
| Color Control | color_color | color_color | ColorLight | Color |
| Color Temperature | color_temperature | color_temperature | ColorLight | Dimmer |
The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.
The switch_dimmer channel is of type switch_dimmer and supports the Dimmer item and is in the DimmableLight category.
The color channel allows to control the color of a light. It is also possible to dim values and switch the light on and off.
The color_color channel is of type color_color and supports the Color item and is in the ColorLight category.
The color temperature channel allows to set the color temperature of a light from 0 (cold) to 100 (warm).
The color_temperature channel is of type color_temperature and supports the Dimmer item and is in the ColorLight category.
The following table provides a summary of the 1 configuration parameters available in the LZW41. Detailed information on each parameter can be found in the sections below.
| Param | Name | Description |
|---|---|---|
| 2 | Memory Function | 0 returns to last ON state, 1 = Returns to last state (ON or OFF) |
| Switch All Mode | Set the mode for the switch when receiving SWITCH ALL commands |
0 returns to last ON state, 1 = Returns to last state (ON or OFF) When power is restored, the bulb reverts to its last ON state, or last state (ON or OFF). 0 returns to last ON state, 1 = Returns to last state (ON or OFF) Values in the range 0 to 1 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_2_1 and is of type INTEGER.
Set the mode for the switch when receiving SWITCH ALL commands.
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | Exclude from All On and All Off groups |
| 1 | Include in All On group |
| 2 | Include in All Off group |
| 255 | Include in All On and All Off groups |
This parameter has the configuration ID switchall_mode and is of type INTEGER.
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The device does not support associations.
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_MULTILEVEL_V2 | |
| COMMAND_CLASS_SWITCH_ALL_V1 | |
| COMMAND_CLASS_SWITCH_COLOR_V2 | |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1 | |
| COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1 | |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1 | |
| COMMAND_CLASS_CONFIGURATION_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_POWERLEVEL_V1 | |
| COMMAND_CLASS_FIRMWARE_UPDATE_MD_V1 | |
| COMMAND_CLASS_ASSOCIATION_V2 | |
| COMMAND_CLASS_VERSION_V2 | |
| COMMAND_CLASS_SECURITY_V1 |
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.