| layout | title |
|---|---|
documentation |
39339 (ZW3107) - ZWave |
{% include base.html %}
This describes the Z-Wave device *39339 (ZW3107) *, manufactured by Honeywell with the thing type UID of honeywell_39339_00_000.
The device is in the category of Power Outlet, defining Small devices to be plugged into a power socket in a wall which stick there.
The 39339 (ZW3107) supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.
Stay connected to your home with a Honeywell Z-Wave Smart Dimmer. Compatible with all Z‑Wave certified gateways, the smart dimmer gives you wireless control of your dimmable lights from any mobile device, computer or Z-Wave enabled remote. Setup is easy – simply plug the dimmer into any in-wall outlet, then connect your light to one of the two dual smart outlets located on either side of the dimmer. Whether you’re at home or away, access the dimmer to turn your lights on and off, or to adjust the brightness levels of the room.
The smart dimmer incorporates reliable, dynamic illumination to your home, giving you a fully lit workspace or letting you settle down for the evening with effective, stylish accent lighting. Not only does the smart dimmer help cut energy costs, but it boosts the safety of your home by keeping rooms looking bright and lived‑in. Give your space the perfect amount of light with a Honeywell Z-Wave Smart Dimmer.
- ALEXA COMPATIBLE (HUB REQUIRED) - Requires an Alexa supported hub for voice control with Amazon Echo Products (Alexa device and hub are sold separately).Cannot connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus)
- REQUIRES A Z-WAVE CERTIFIED HUB - Compatible with the following Z-Wave Hubs: Honeywell, SmartThings, Pulse, Trane, Wink, Nexia, Honeywell, HomeSeer, Smart Security, Harmony Home Hub Extender, Vera, and Fibaro
- WIRELESSLY CONTROL & SCHEDULE LIGHTS - Schedule timed events for connected lighting. Customize scenes for day or night, home or away. Wirelessly control from anywhere through your smartphone, tablet, PC or Z-Wave remote
- FULL RANGE DIMMING – Give your space the perfect amount of light with the ability to customize the brightness levels from 0 to 100%. Works ONLY with dimmable bulbs and lamps
- 2 SIMULTANEOUSLY CONTROLLED POLARIZED OUTLET - features 2 polarized outlets that can be controlled at the same time (NOT SEPERATLEY) and a manual ON/OFF, dim & program physical button. To setup simply plug the module into any in-wall outlet, then connect
Press and release the manual/program button. (Tested to work with Network Wide Inclusion.)
Press and release the manual/program button.
The following table summarises the channels available for the 39339 (ZW3107) -:
| Channel Name | Channel ID | Channel Type | Category | Item Type |
|---|---|---|---|---|
| Dimmer | switch_dimmer | switch_dimmer | DimmableLight | Dimmer |
| Scene Number | scene_number | scene_number | Number |
The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.
The switch_dimmer channel is of type switch_dimmer and supports the Dimmer item and is in the DimmableLight category.
Triggers when a scene button is pressed.
The scene_number channel is of type scene_number and supports the Number item.
The following table provides a summary of the 8 configuration parameters available in the 39339 (ZW3107) . Detailed information on each parameter can be found in the sections below.
| Param | Name | Description |
|---|---|---|
| 3 | LED Light | LED Light Control |
| 6 | Dim Up/Down Behavior | Controls whether level changes are instant or smooth |
| 7 | Dim Rate Adjustments (Z-Wave Controller) | Number of steps or levels |
| 8 | Dim Rate Adjustments (Z-Wave Controller, Timing) | Timing of steps |
| 9 | Dim Rate Adjustments (manually controlled) | Number of steps or levels |
| 10 | Dim Rate Adjustments (manually controlled, timing) | Timing of steps |
| 11 | Dim Rate Adjustments (All-On/Off Commands) | Number of steps or levels |
| 12 | Dim Rate Adjustments (All-On/Off Command, Timing) | Timing of steps |
| Switch All Mode | Set the mode for the switch when receiving SWITCH ALL commands |
LED Light Control When shipped from the factory, the LED is set to turn ON when the connected light is turned On. This is the default setting and can be changed if your primary controller supports the node configuration function or by a manual method. To make the LED turn ON when the light is turned ON, change parameter 3s value to 1. To turn the LED OFF at all times, change parameter 3s value to 2. The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | Set parameter to factory default |
| 1 | LED On when light is turned On |
| 2 | LED always Off |
The manufacturer defined default value is 0 (Set parameter to factory default).
This parameter has the configuration ID config_3_1 and is of type INTEGER.
Controls whether level changes are instant or smooth This is an undocumented feature. This parameter allows you to choose between instant level changes and smooth level changes on newer Jasco/Honeywell/GE dimmers. This feature should work on dimmers that come out of the box with instant level changes, it may not work on older dimmers that smoothly change levels by default. The following option values may be configured, in addition to values in the range 0 to 1 -:
| Value | Description |
|---|---|
| 0 | Instant Level Changes |
| 1 | Smooth Level Changes |
The manufacturer defined default value is 0 (Instant Level Changes).
This parameter has the configuration ID config_6_1 and is of type INTEGER.
Number of steps or levels
Values in the range 1 to 99 may be set.
The manufacturer defined default value is 1.
This parameter has the configuration ID config_7_1 and is of type INTEGER.
Timing of steps
Values in the range 1 to 255 may be set.
The manufacturer defined default value is 3.
This parameter has the configuration ID config_8_2 and is of type INTEGER.
Number of steps or levels
Values in the range 1 to 99 may be set.
The manufacturer defined default value is 1.
This parameter has the configuration ID config_9_1 and is of type INTEGER.
Timing of steps
Values in the range 0 to 255 may be set.
The manufacturer defined default value is 3.
This parameter has the configuration ID config_10_2 and is of type INTEGER.
Number of steps or levels
Values in the range 1 to 99 may be set.
The manufacturer defined default value is 1.
This parameter has the configuration ID config_11_1 and is of type INTEGER.
Timing of steps
Values in the range 1 to 255 may be set.
The manufacturer defined default value is 3.
This parameter has the configuration ID config_12_2 and is of type INTEGER.
Set the mode for the switch when receiving SWITCH ALL commands.
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | Exclude from All On and All Off groups |
| 1 | Include in All On group |
| 2 | Include in All Off group |
| 255 | Include in All On and All Off groups |
This parameter has the configuration ID switchall_mode and is of type INTEGER.
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The 39339 (ZW3107) supports 3 association groups.
The Lifeline association group reports device status to a hub and is not designed to control other devices directly. When using the Lineline group with a hub, in most cases, only the lifeline group will need to be configured and normally the hub will perform this automatically during the device initialisation.
Association group 1 supports 5 nodes.
Basic Set local load
Association group 2 supports 5 nodes.
Basic Set double click
Association group 3 supports 5 nodes.
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_MULTILEVEL_V2 | Linked to BASIC |
| COMMAND_CLASS_SWITCH_ALL_V1 | |
| COMMAND_CLASS_SCENE_ACTIVATION_V1 | |
| COMMAND_CLASS_SCENE_ACTUATOR_CONF_V1 | |
| COMMAND_CLASS_CRC_16_ENCAP_V1 | |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1 | |
| COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1 | |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1 | |
| COMMAND_CLASS_CONFIGURATION_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_POWERLEVEL_V1 | |
| COMMAND_CLASS_FIRMWARE_UPDATE_MD_V1 | |
| COMMAND_CLASS_ASSOCIATION_V2 | |
| COMMAND_CLASS_VERSION_V2 |
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.