Skip to content

Latest commit

 

History

History
executable file
·
85 lines (54 loc) · 2.77 KB

hmlm001_0_0.md

File metadata and controls

executable file
·
85 lines (54 loc) · 2.77 KB
Raw
layout title
documentation
HM-LM001 - ZWave

{% include base.html %}

HM-LM001 Lighting Module

This describes the Z-Wave device HM-LM001, manufactured by Erone with the thing type UID of erone_hmlm001_00_000.

The device is in the category of Wall Switch, defining Any device attached to the wall that controls a binary status of something, for ex. a light switch.

HM-LM001 product image

The HM-LM001 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.

Overview

  • Use with incandescent light bulbs up to 200W
  • Control on/off for attached lamp
  • Dim the attached lamp
  • LED shows that module is working
  • Manual override button

Inclusion Information

  • Start the inclusion process on the hub
  • Single click the button on the device

Exclusion Information

  • Start the exclusion process on the hub
  • Triple click the button on the device

Channels

The following table summarises the channels available for the HM-LM001 -:

Channel Name Channel ID Channel Type Category Item Type
Dimmer switch_dimmer switch_dimmer DimmableLight Dimmer

Dimmer

The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.

The switch_dimmer channel is of type switch_dimmer and supports the Dimmer item and is in the DimmableLight category.

Device Configuration

The device has no configuration parameters defined.

Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The device does not support associations.

Technical Information

Endpoints

Endpoint 0

Command Class Comment
COMMAND_CLASS_NO_OPERATION_V1
COMMAND_CLASS_BASIC_V1
COMMAND_CLASS_SWITCH_MULTILEVEL_V1 Linked to BASIC
COMMAND_CLASS_SWITCH_ALL_V1
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1
COMMAND_CLASS_POWERLEVEL_V1
COMMAND_CLASS_PROTECTION_V1
COMMAND_CLASS_VERSION_V1

Documentation Links

Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.