| layout | title |
|---|---|
documentation |
DMS01 - ZWave |
{% include base.html %}
This describes the Z-Wave device DMS01, manufactured by Elexa Consumer Products Inc. with the thing type UID of elexa_dms01_00_000.
The device is in the category of Siren, defining Siren used by Alarm systems.
The DMS01 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is unable to participate in the routing of data from other devices.
Alert you with sounds and built-in LED’s to security threats and problems such as leaks and fires. It can also sound a mild chime when doors or windows open to let you know when people come and go.
Follow the instructions for your Z-Wave certified Controller to enter inclusion mode. When prompted by the Controller:
- For proper inclusion, bring the Siren to within 10 feet of your Controller. After inclusion, the device can be moved to any desired location.
- Remove the Back Plate of the Siren.
- Remove the Battery Tabs.
- Press the Connect Button quickly 3 times in a row. The LED Ring will flash five times indicating inclusion.
Follow the instructions for your Z-Wave certified Controller to enter exclusion mode. When prompted by the Controller:
- Remove the Back Plate of the Siren.
- Press the Connect Button quickly 3 times in a row. The LED Ring will flash five times indicating exclusion/disconnection.
The following table summarises the channels available for the DMS01 -:
| Channel Name | Channel ID | Channel Type | Category | Item Type |
|---|---|---|---|---|
| Switch | switch_binary | switch_binary | Switch | Switch |
| Notification Sound | config_decimal | config_decimal | Number | |
| Primary Notification Volume | config_decimal | config_decimal | Number | |
| Secondary Notification Volume | config_decimal | config_decimal | Number | |
| Primary Notification Sound | config_decimal | config_decimal | Number | |
| Secondary Notification Sound | config_decimal | config_decimal | Number | |
| Primary Notification Length | config_decimal | config_decimal | Number | |
| Secondary Notification Length | config_decimal | config_decimal | Number | |
| Alarm | alarm_general | alarm_general | Alarm | Switch |
| Battery Level | battery-level | system.battery_level | Battery | Number |
Switch the power on and off.
The switch_binary channel is of type switch_binary and supports the Switch item and is in the Switch category.
Select the primary (1) and secondary (2) notification sounds.
Generic class for configuration parameter.
The config_decimal channel is of type config_decimal and supports the Number item.
Primary notification volume: 1 (low), 2 (medium), 3 (high)
Generic class for configuration parameter.
The config_decimal channel is of type config_decimal and supports the Number item.
Primary notification volume: 1 (low), 2 (medium), 3 (high)
Generic class for configuration parameter.
The config_decimal channel is of type config_decimal and supports the Number item.
Set the primary notification sound: 1 (ding dong), 2 (Fur Elise), 3 (Westminster Chime), 4 (Dingdongdingdongdingdong), 5 (William Tell Overture), 6 (Classical), 7 (Weeooeeooeeooeeoo), 8 (Err-err-err-err-err), 9 (Beepbeepbeepbeep), 10 (beeeep-beeeep-beeeep)
Generic class for configuration parameter.
The config_decimal channel is of type config_decimal and supports the Number item.
Set the primary notification sound: 1 (ding dong), 2 (Fur Elise), 3 (Westminster Chime), 4 (Dingdongdingdongdingdong), 5 (William Tell Overture), 6 (Classical), 7 (Weeooeeooeeooeeoo), 8 (Err-err-err-err-err), 9 (Beepbeepbeepbeep), 10 (beeeep-beeeep-beeeep)
Generic class for configuration parameter.
The config_decimal channel is of type config_decimal and supports the Number item.
Sets the primary notification length: 1 (30s), 2 (1m), 3 (5m), 255 (nonstop)
Generic class for configuration parameter.
The config_decimal channel is of type config_decimal and supports the Number item.
Set the secondary notification length: 0 (non-stop), 1 (1m), 5 (5m), 255 (does not play)
Generic class for configuration parameter.
The config_decimal channel is of type config_decimal and supports the Number item.
Indicates if an alarm is triggered.
The alarm_general channel is of type alarm_general and supports the Switch item and is in the Alarm category. This is a read only channel so will only be updated following state changes from the device.
The following state translation is provided for this channel to the Switch item type -:
| Value | Label |
|---|---|
| OFF | OK |
| ON | Alarm |
Represents the battery level as a percentage (0-100%). Bindings for things supporting battery level in a different format (e.g. 4 levels) should convert to a percentage to provide a consistent battery level reading.
The system.battery-level channel is of type system.battery-level and supports the Number item and is in the Battery category.
This channel provides the battery level as a percentage and also reflects the low battery warning state. If the battery state is in low battery warning state, this will read 0%.
The following table provides a summary of the 7 configuration parameters available in the DMS01. Detailed information on each parameter can be found in the sections below.
| Param | Name | Description |
|---|---|---|
| 1 | Primary Notification Volume Level | |
| 2 | Primary Notification Length | |
| 3 | Secondary Notification Length | |
| 4 | Secondary Notification Volume Level | |
| 5 | Primary Notification Sound | Set the siren primary notification sound. |
| 6 | Secondary Notification Sound | |
| 7 | Toggle secondary chime | Toggles between primary and secondary chime for binary switch |
The following option values may be configured -:
| Value | Description |
|---|---|
| 1 | Low Volume |
| 2 | Medium Volume |
| 3 | High Volume |
The manufacturer defined default value is 2 (Medium Volume).
This parameter has the configuration ID config_1_2 and is of type INTEGER.
The following option values may be configured -:
| Value | Description |
|---|---|
| 1 | 30 Seconds |
| 2 | 1 Minute |
| 3 | 5 Minutes |
| 255 | Plays Until Battery Is Depleted |
The manufacturer defined default value is 2 (1 Minute).
This parameter has the configuration ID config_2_2 and is of type INTEGER.
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | Does Not Stop |
| 1 | One Minute |
| 5 | Five Minutes |
| 255 | Chime Will Not Play |
The manufacturer defined default value is 1 (One Minute).
This parameter has the configuration ID config_3_2 and is of type INTEGER.
The following option values may be configured -:
| Value | Description |
|---|---|
| 1 | Low Volume |
| 2 | Medium Volume |
| 3 | High Volume |
The manufacturer defined default value is 2 (Medium Volume).
This parameter has the configuration ID config_4_2 and is of type INTEGER.
Set the siren primary notification sound. The siren offers ten different sounds to use as the Siren (primary) notification. This parameter sets the Siren (primary) notification sound. The following option values may be configured -:
| Value | Description |
|---|---|
| 1 | Ding dong |
| 2 | Fur Elise |
| 3 | Westminster Chime |
| 4 | Dingdongdingdongdingdong |
| 5 | William Tell Overture |
| 6 | Classical |
| 7 | Weeooeeooeeooeeoo |
| 8 | Err-err-err-err-err |
| 9 | Beepbeepbeepbeep (Default) |
| 10 | beeeep-beeeep-beeeep |
The manufacturer defined default value is 9 (Beepbeepbeepbeep (Default)).
This parameter has the configuration ID config_5_2 and is of type INTEGER.
The following option values may be configured -:
| Value | Description |
|---|---|
| 1 | Ding dong |
| 2 | Fur Elise |
| 3 | Westminster Chime |
| 4 | Dingdongdingdongdingdong |
| 5 | William Tell Overture |
| 6 | Classical |
| 7 | Weeooeeooeeooeeoo |
| 8 | Err-err-err-err-err |
| 9 | Beepbeepbeepbeep (Default) |
| 10 | beeeep-beeeep-beeeep |
The manufacturer defined default value is 9 (Beepbeepbeepbeep (Default)).
This parameter has the configuration ID config_6_2 and is of type INTEGER.
Toggles between primary and secondary chime for binary switch
The following option values may be configured -:
| Value | Description |
|---|---|
| 1 | Primary notification will play |
| 2 | Secondary notification will play |
The manufacturer defined default value is 1 (Primary notification will play).
This parameter has the configuration ID config_7_2 and is of type INTEGER.
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The DMS01 supports 3 association groups.
The Lifeline association group reports device status to a hub and is not designed to control other devices directly. When using the Lineline group with a hub, in most cases, only the lifeline group will need to be configured and normally the hub will perform this automatically during the device initialisation.
Association group 1 supports 5 nodes.
Association group 2 supports 5 nodes.
Association group 3 supports 5 nodes.
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_BINARY_V1 | |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1 | |
| COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1 | |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1 | |
| COMMAND_CLASS_CONFIGURATION_V1 | |
| COMMAND_CLASS_ALARM_V6 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_POWERLEVEL_V1 | |
| COMMAND_CLASS_BATTERY_V1 | |
| COMMAND_CLASS_ASSOCIATION_V2 | |
| COMMAND_CLASS_VERSION_V2 | |
| COMMAND_CLASS_INDICATOR_V1 |
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.