| layout | title |
|---|---|
documentation |
ZRP200 - ZWave |
{% include base.html %}
This describes the Z-Wave device ZRP200, manufactured by ACT - Advanced Control Technologies with the thing type UID of act_zrp200_00_000.
The device is in the category of Power Outlet, defining Small devices to be plugged into a power socket in a wall which stick there.
The ZRP200 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.
This is a very old appliance module, which doesn't report the manufacturer information. You'll have to edit the node.xml file(s) yourself. Change the manufacturer from 0x7fffffff to 0x1, to set it to manufacturer ACT. Also, change the deviceType to 7fff and the deviceid to 7fff.
Use the button on the device.
Use Habmin or another zwave tool to exclude the device from the zwave mesh.
The following table summarises the channels available for the ZRP200 -:
| Channel Name | Channel ID | Channel Type | Category | Item Type |
|---|---|---|---|---|
| Switch | switch_binary | switch_binary | Switch | Switch |
Switch the power on and off.
The switch_binary channel is of type switch_binary and supports the Switch item and is in the Switch category.
The device has no configuration parameters defined.
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The device does not support associations.
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_BINARY_V1 | Linked to BASIC |
| COMMAND_CLASS_SWITCH_ALL_V1 | |
| COMMAND_CLASS_PROTECTION_V1 |
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.