rzeldent · rzeldent · Feb 19, 2024 · Jan 17, 2024 · Jan 19, 2024 · Jan 20, 2024
diff --git a/README.md b/README.md
@@ -45,7 +45,6 @@ These defines are used by the LVGL drivers for these boards: [esp32-smartdisplay
 >
 > - The additional flash chip (W25Q32JV) is not always mounted on the board.
 > - Some boards have different revisions/versions and require a different definition or custom initialization display vendor string. e.g. 2432S028R/v2 and 8048S070Cv11!
-> - Development is still ongoing for the ESP32-2432S022C
 
 ## Board defines
 
@@ -62,16 +61,17 @@ The table below provides some explanation of the variable names. These definitio
 |                          |                                                                 |
 | BUTTON_BOOT              | GPIO of the BOOT pushbutton                                     |
 |                          |                                                                 |
-| LCD_ST7701_PAR           | LCD uses the ST7701 display driver                              |
-| LCD_ST7789_SPI           | LCD uses the ST7789 display driver                              |
-| LCD_ST7796_SPI           | LCD uses the ST7796 display driver                              |
-| LCD_GC9A01_SPI           | LCD uses the GC9A01 display driver                              |
-| LCD_ILI9341_SPI          | LCD uses the ILI9341 display driver                             |
-| LCD_ST7262_PAR           | LCD uses the ST7262 display driver                              |
+| LCD_ST7701_PAR           | LCD uses the ST7701 display driver (Parallel)                   |
+| LCD_ST7789_SPI           | LCD uses the ST7789 display driver (SPI)                        |
+| LCD_ST7789_I80           | LCD uses the ST7789 display driver (I80 mode)                   |
+| LCD_ST7796_SPI           | LCD uses the ST7796 display driver (SPI)                        |
+| LCD_GC9A01_SPI           | LCD uses the GC9A01 display driver (SPI)                        |
+| LCD_ILI9341_SPI          | LCD uses the ILI9341 display driver (SPI)                       |
+| LCD_ST7262_PAR           | LCD uses the ST7262 display driver (Parallel)                   |
 |                          |                                                                 |
 | LCD_WIDTH                | The width of the LCD panel in pixels                            |
 | LCD_HEIGHT               | The height of the LCD panel in pixels                           |
-| BCKL                     | GPIO of the backlight                                           |
+| BCKL_GPIO                | GPIO of the backlight                                           |
 | type_SPI_HOST            | The SPI host to use for the LCD driver, eg. ST7789_SPI_HOST     |
 | type_SPI_MOSI            | SPI MOSI                                                        |
 | type_SPI_MISO            | SPI MISO                                                        |
@@ -323,7 +323,7 @@ The audio is a bit distorted. [HexeguitarDIY](https://github.com/hexeguitar/ESP3
 ### ESP32-2432S022 N/C
 
 - USB-C
-- ILI9341
+- ST7789
 - CST816S
 - TF card interface
 - Power + Serial: JST1.25 4p

diff --git a/assets/schematics/ESP32-2432022-LCM-V1.0.png → ...ts/schematics/ESP32-2432S022-LCM-V1.0.png b/assets/schematics/ESP32-2432022-LCM-V1.0.png → ...ts/schematics/ESP32-2432S022-LCM-V1.0.png
diff --git a/assets/schematics/ESP32-2432022-MCU-V1.0.png → ...ts/schematics/ESP32-2432S022-MCU-V1.0.png b/assets/schematics/ESP32-2432022-MCU-V1.0.png → ...ts/schematics/ESP32-2432S022-MCU-V1.0.png
diff --git a/esp32-1732S019C.json b/esp32-1732S019C.json
@@ -18,7 +18,7 @@
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_SPIRAM|MALLOC_CAP_8BIT)'",
       "'-D LCD_WIDTH=170'",
       "'-D LCD_HEIGHT=320'",
-      "'-D BCKL=14'",
+      "'-D GPIO_BCKL=14'",
       "'-D LCD_IPS'",
       "'-D LCD_ST7789_SPI'",
       "'-D ST7789_SPI_HOST=SPI2_HOST'",

diff --git a/esp32-1732S019N.json b/esp32-1732S019N.json
@@ -18,7 +18,7 @@
       "'-D LCD_HEIGHT=320'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_SPIRAM|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=14'",
+      "'-D GPIO_BCKL=14'",
       "'-D LCD_IPS'",
       "'-D LCD_ST7789_SPI'",
       "'-D ST7789_SPI_HOST=SPI2_HOST'",

diff --git a/esp32-2424S012C.json b/esp32-2424S012C.json
@@ -9,12 +9,14 @@
     "flash_mode": "qio",
     "extra_flags": [
       "'-D ARDUINO_ESP32C3_DEV'",
+      "'-D ARDUINO_USB_MODE=1'",
+      "'-D ARDUINO_USB_CDC_ON_BOOT=1'",
       "'-D ESP32_2424S012C'",
       "'-D LCD_WIDTH=240'",
       "'-D LCD_HEIGHT=240'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/4)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=3'",
+      "'-D GPIO_BCKL=3'",
       "'-D LCD_GC9A01_SPI'",
       "'-D GC9A01_SPI_HOST=SPI2_HOST'",
       "'-D GC9A01_SPI_DMA_CHANNEL=SPI_DMA_CH_AUTO'",

diff --git a/esp32-2424S012N.json b/esp32-2424S012N.json
@@ -9,12 +9,14 @@
     "flash_mode": "qio",
     "extra_flags": [
       "'-D ARDUINO_ESP32C3_DEV'",
+      "'-D ARDUINO_USB_MODE=1'",
+      "'-D ARDUINO_USB_CDC_ON_BOOT=1'",
       "'-D ESP32_2424S012N'",
       "'-D LCD_WIDTH=240'",
       "'-D LCD_HEIGHT=240'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/4)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=3'",
+      "'-D GPIO_BCKL=3'",
       "'-D LCD_GC9A01_SPI'",
       "'-D GC9A01_SPI_HOST=SPI2_HOST'",
       "'-D GC9A01_SPI_DMA_CHANNEL=SPI_DMA_CH_AUTO'",

diff --git a/esp32-2432S022C.json b/esp32-2432S022C.json
@@ -11,7 +11,7 @@
       "'-D LCD_HEIGHT=320'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/8)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=0'",
+      "'-D GPIO_BCKL=0'",
       "'-D LCD_ST7789_I80'",
       "'-D ST7789_I80_BUS_CONFIG_CLK_SRC=LCD_CLK_SRC_PLL160M'",
       "'-D ST7789_I80_BUS_CONFIG_DC=16'",
@@ -29,7 +29,7 @@
       "'-D ST7789_I80_BUS_CONFIG_PSRAM_TRANS_ALIGN=64'",
       "'-D ST7789_I80_BUS_CONFIG_SRAM_TRANS_ALIGN=4'",
       "'-D ST7789_IO_I80_CONFIG_CS_GPIO_NUM=17'",
-      "'-D ST7789_IO_I80_CONFIG_PCLK_HZ=24000000'",
+      "'-D ST7789_IO_I80_CONFIG_PCLK_HZ=12000000'",
       "'-D ST7789_IO_I80_CONFIG_TRANS_QUEUE_DEPTH=10'",
       "'-D ST7789_IO_I80_CONFIG_LCD_CMD_BITS=8'",
       "'-D ST7789_IO_I80_CONFIG_LCD_PARAM_BITS=8'",
@@ -43,7 +43,7 @@
       "'-D ST7789_IO_I80_CONFIG_FLAGS_PCLK_ACTIVE_NEG=0'",
       "'-D ST7789_IO_I80_CONFIG_FLAGS_PCLK_IDLE_LOW=0'",
       "'-D ST7789_DEV_CONFIG_RESET_GPIO_NUM=GPIO_NUM_NC'",
-      "'-D ST7789_DEV_CONFIG_COLOR_SPACE=ESP_LCD_COLOR_SPACE_BGR'",
+      "'-D ST7789_DEV_CONFIG_COLOR_SPACE=ESP_LCD_COLOR_SPACE_RGB'",
       "'-D ST7789_DEV_CONFIG_BITS_PER_PIXEL=16'",
       "'-D ST7789_DEV_CONFIG_FLAGS_RESET_ACTIVE_HIGH=false'",
       "'-D ST7789_DEV_CONFIG_VENDOR_CONFIG=NULL'",

diff --git a/esp32-2432S022N.json b/esp32-2432S022N.json
@@ -11,7 +11,7 @@
       "'-D LCD_HEIGHT=320'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/8)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=0'",
+      "'-D GPIO_BCKL=0'",
       "'-D LCD_ST7789_I80'",
       "'-D ST7789_I80_BUS_CONFIG_CLK_SRC=LCD_CLK_SRC_PLL160M'",
       "'-D ST7789_I80_BUS_CONFIG_DC=16'",
@@ -29,7 +29,7 @@
       "'-D ST7789_I80_BUS_CONFIG_PSRAM_TRANS_ALIGN=64'",
       "'-D ST7789_I80_BUS_CONFIG_SRAM_TRANS_ALIGN=4'",
       "'-D ST7789_IO_I80_CONFIG_CS_GPIO_NUM=17'",
-      "'-D ST7789_IO_I80_CONFIG_PCLK_HZ=24000000'",
+      "'-D ST7789_IO_I80_CONFIG_PCLK_HZ=12000000'",
       "'-D ST7789_IO_I80_CONFIG_TRANS_QUEUE_DEPTH=10'",
       "'-D ST7789_IO_I80_CONFIG_LCD_CMD_BITS=8'",
       "'-D ST7789_IO_I80_CONFIG_LCD_PARAM_BITS=8'",
@@ -43,7 +43,7 @@
       "'-D ST7789_IO_I80_CONFIG_FLAGS_PCLK_ACTIVE_NEG=0'",
       "'-D ST7789_IO_I80_CONFIG_FLAGS_PCLK_IDLE_LOW=0'",
       "'-D ST7789_DEV_CONFIG_RESET_GPIO_NUM=GPIO_NUM_NC'",
-      "'-D ST7789_DEV_CONFIG_COLOR_SPACE=ESP_LCD_COLOR_SPACE_BGR'",
+      "'-D ST7789_DEV_CONFIG_COLOR_SPACE=ESP_LCD_COLOR_SPACE_RGB'",
       "'-D ST7789_DEV_CONFIG_BITS_PER_PIXEL=16'",
       "'-D ST7789_DEV_CONFIG_FLAGS_RESET_ACTIVE_HIGH=false'",
       "'-D ST7789_DEV_CONFIG_VENDOR_CONFIG=NULL'",

diff --git a/esp32-2432S024C.json b/esp32-2432S024C.json
@@ -11,7 +11,7 @@
       "'-D LCD_HEIGHT=320'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/4)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=27'",
+      "'-D GPIO_BCKL=27'",
       "'-D LCD_ILI9341_SPI'",
       "'-D ILI9341_SPI_HOST=SPI2_HOST'",
       "'-D ILI9341_SPI_DMA_CHANNEL=SPI_DMA_CH_AUTO'",

diff --git a/esp32-2432S024N.json b/esp32-2432S024N.json
@@ -11,7 +11,7 @@
       "'-D LCD_HEIGHT=320'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/4)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=27'",
+      "'-D GPIO_BCKL=27'",
       "'-D LCD_ILI9341_SPI'",
       "'-D ILI9341_SPI_HOST=SPI2_HOST'",
       "'-D ILI9341_SPI_DMA_CHANNEL=SPI_DMA_CH_AUTO'",

diff --git a/esp32-2432S024R.json b/esp32-2432S024R.json
@@ -11,7 +11,7 @@
       "'-D LCD_HEIGHT=320'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/4)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=27'",
+      "'-D GPIO_BCKL=27'",
       "'-D LCD_ILI9341_SPI'",
       "'-D ILI9341_SPI_HOST=SPI2_HOST'",
       "'-D ILI9341_SPI_DMA_CHANNEL=SPI_DMA_CH_AUTO'",      

diff --git a/esp32-2432S028R.json b/esp32-2432S028R.json
@@ -11,7 +11,7 @@
       "'-D LCD_HEIGHT=320'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/4)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=21'",
+      "'-D GPIO_BCKL=21'",
       "'-D LCD_ILI9341_SPI'",
       "'-D ILI9341_SPI_HOST=SPI2_HOST'",
       "'-D ILI9341_SPI_DMA_CHANNEL=SPI_DMA_CH_AUTO'",

diff --git a/esp32-2432S028Rv2.json b/esp32-2432S028Rv2.json
@@ -11,7 +11,7 @@
       "'-D LCD_HEIGHT=320'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/4)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=21'",
+      "'-D GPIO_BCKL=21'",
       "'-D LCD_ILI9341_SPI'",
       "'-D ILI9341_SPI_HOST=SPI2_HOST'",
       "'-D ILI9341_SPI_DMA_CHANNEL=SPI_DMA_CH_AUTO'",

diff --git a/esp32-2432S028Rv3.json b/esp32-2432S028Rv3.json
@@ -11,7 +11,7 @@
       "'-D LCD_HEIGHT=320'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/4)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=21'",
+      "'-D GPIO_BCKL=21'",
       "'-D LCD_ST7789_SPI'",
       "'-D ST7789_SPI_HOST=SPI2_HOST'",
       "'-D ST7789_SPI_DMA_CHANNEL=SPI_DMA_CH_AUTO'",

diff --git a/esp32-2432S032C.json b/esp32-2432S032C.json
@@ -11,7 +11,7 @@
       "'-D LCD_HEIGHT=320'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/4)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=27'",
+      "'-D GPIO_BCKL=27'",
       "'-D LCD_IPS'",
       "'-D LCD_ST7789_SPI'",
       "'-D ST7789_SPI_HOST=SPI2_HOST'",

diff --git a/esp32-2432S032N.json b/esp32-2432S032N.json
@@ -11,7 +11,7 @@
       "'-D LCD_HEIGHT=320'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/4)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=27'",
+      "'-D GPIO_BCKL=27'",
       "'-D LCD_IPS'",
       "'-D LCD_ST7789_SPI'",
       "'-D ST7789_SPI_HOST=SPI2_HOST'",

diff --git a/esp32-2432S032R.json b/esp32-2432S032R.json
@@ -11,7 +11,7 @@
       "'-D LCD_HEIGHT=320'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/4)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=27'",
+      "'-D GPIO_BCKL=27'",
       "'-D LCD_ST7789_SPI'",
       "'-D LCD_IPS'",
       "'-D ST7789_SPI_HOST=SPI2_HOST'",

diff --git a/esp32-3248S035C.json b/esp32-3248S035C.json
@@ -11,7 +11,7 @@
       "'-D LCD_HEIGHT=480'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/4)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=27'",
+      "'-D GPIO_BCKL=27'",
       "'-D LCD_ST7796_SPI'",
       "'-D ST7796_SPI_HOST=SPI2_HOST'",
       "'-D ST7796_SPI_DMA_CHANNEL=SPI_DMA_CH_AUTO'",

diff --git a/esp32-3248S035R.json b/esp32-3248S035R.json
@@ -11,7 +11,7 @@
       "'-D LCD_HEIGHT=480'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/4)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=27'",
+      "'-D GPIO_BCKL=27'",
       "'-D LCD_ST7796_SPI'",
       "'-D ST7796_SPI_HOST=SPI2_HOST'",
       "'-D ST7796_SPI_DMA_CHANNEL=SPI_DMA_CH_AUTO'",

diff --git a/esp32-4827S043C.json b/esp32-4827S043C.json
@@ -18,7 +18,7 @@
       "'-D LCD_HEIGHT=272'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_SPIRAM|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=2'",
+      "'-D GPIO_BCKL=2'",
       "'-D LCD_ST7262_PAR'",
       "'-D ST7262_PANEL_CONFIG_CLK_SRC=LCD_CLK_SRC_PLL160M'",
       "'-D ST7262_PANEL_CONFIG_TIMINGS_PCLK_HZ=(8*1000000)'",

diff --git a/esp32-4827S043N.json b/esp32-4827S043N.json
@@ -18,7 +18,7 @@
       "'-D LCD_HEIGHT=272'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_SPIRAM|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=2'",
+      "'-D GPIO_BCKL=2'",
       "'-D LCD_ST7262_PAR'",
       "'-D ST7262_PANEL_CONFIG_CLK_SRC=LCD_CLK_SRC_PLL160M'",
       "'-D ST7262_PANEL_CONFIG_TIMINGS_PCLK_HZ=(8*1000000)'",

diff --git a/esp32-4827S043R.json b/esp32-4827S043R.json
@@ -18,7 +18,7 @@
       "'-D LCD_HEIGHT=272'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_SPIRAM|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=2'",
+      "'-D GPIO_BCKL=2'",
       "'-D LCD_ST7262_PAR'",
       "'-D ST7262_PANEL_CONFIG_CLK_SRC=LCD_CLK_SRC_PLL160M'",
       "'-D ST7262_PANEL_CONFIG_TIMINGS_PCLK_HZ=(8*1000000)'",

diff --git a/esp32-4848S040CIY1.json b/esp32-4848S040CIY1.json
@@ -18,7 +18,7 @@
       "'-D LCD_HEIGHT=480'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_SPIRAM|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=38'",
+      "'-D GPIO_BCKL=38'",
       "'-D LCD_ST7701_PAR'",
       "'-D ST7701_IO_3WIRE_SPI_LINE_CONFIG_CS_GPIO_NUM=39'",
       "'-D ST7701_IO_3WIRE_SPI_LINE_CONFIG_SCL_GPIO_NUM=48'",

diff --git a/esp32-4848S040CIY3.json b/esp32-4848S040CIY3.json
@@ -18,7 +18,7 @@
       "'-D LCD_HEIGHT=480'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_SPIRAM|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=38'",
+      "'-D GPIO_BCKL=38'",
       "'-D LCD_ST7701_PAR'",
       "'-D ST7701_IO_3WIRE_SPI_LINE_CONFIG_CS_GPIO_NUM=39'",
       "'-D ST7701_IO_3WIRE_SPI_LINE_CONFIG_SCL_GPIO_NUM=48'",

diff --git a/esp32-8048S043C.json b/esp32-8048S043C.json
@@ -18,7 +18,7 @@
       "'-D LCD_HEIGHT=480'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_SPIRAM|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=2'",
+      "'-D GPIO_BCKL=2'",
       "'-D LCD_ST7262_PAR'",
       "'-D ST7262_PANEL_CONFIG_CLK_SRC=LCD_CLK_SRC_PLL160M'",
       "'-D ST7262_PANEL_CONFIG_TIMINGS_PCLK_HZ=(8*1000000)'",

diff --git a/esp32-8048S043N.json b/esp32-8048S043N.json
@@ -18,7 +18,7 @@
       "'-D LCD_HEIGHT=480'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_SPIRAM|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=2'",
+      "'-D GPIO_BCKL=2'",
       "'-D LCD_ST7262_PAR'",
       "'-D ST7262_PANEL_CONFIG_CLK_SRC=LCD_CLK_SRC_PLL160M'",
       "'-D ST7262_PANEL_CONFIG_TIMINGS_PCLK_HZ=(8*1000000)'",

diff --git a/esp32-8048S043R.json b/esp32-8048S043R.json
@@ -18,7 +18,7 @@
       "'-D LCD_HEIGHT=480'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_SPIRAM|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=2'",
+      "'-D GPIO_BCKL=2'",
       "'-D LCD_ST7262_PAR'",
       "'-D ST7262_PANEL_CONFIG_CLK_SRC=LCD_CLK_SRC_PLL160M'",
       "'-D ST7262_PANEL_CONFIG_TIMINGS_PCLK_HZ=(8*1000000)'",

diff --git a/esp32-8048S050C.json b/esp32-8048S050C.json
@@ -18,7 +18,7 @@
       "'-D LCD_HEIGHT=480'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_SPIRAM|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=2'",
+      "'-D GPIO_BCKL=2'",
       "'-D LCD_ST7262_PAR'",
       "'-D ST7262_PANEL_CONFIG_CLK_SRC=LCD_CLK_SRC_PLL160M'",
       "'-D ST7262_PANEL_CONFIG_TIMINGS_PCLK_HZ=(8*1000000)'",

diff --git a/esp32-8048S050N.json b/esp32-8048S050N.json
@@ -18,7 +18,7 @@
       "'-D LCD_HEIGHT=480'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_SPIRAM|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=2'",
+      "'-D GPIO_BCKL=2'",
       "'-D LCD_ST7262_PAR'",
       "'-D ST7262_PANEL_CONFIG_CLK_SRC=LCD_CLK_SRC_PLL160M'",
       "'-D ST7262_PANEL_CONFIG_TIMINGS_PCLK_HZ=(8*1000000)'",

diff --git a/esp32-8048S050R.json b/esp32-8048S050R.json
@@ -18,7 +18,7 @@
       "'-D LCD_HEIGHT=480'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_SPIRAM|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=2'",
+      "'-D GPIO_BCKL=2'",
       "'-D LCD_ST7262_PAR'",
       "'-D ST7262_PANEL_CONFIG_CLK_SRC=LCD_CLK_SRC_PLL160M'",
       "'-D ST7262_PANEL_CONFIG_TIMINGS_PCLK_HZ=(8*1000000)'",

diff --git a/esp32-8048S070C.json b/esp32-8048S070C.json
@@ -18,7 +18,7 @@
       "'-D LCD_HEIGHT=480'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_SPIRAM|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=2'",
+      "'-D GPIO_BCKL=2'",
       "'-D LCD_ST7262_PAR'",
       "'-D ST7262_PANEL_CONFIG_CLK_SRC=LCD_CLK_SRC_PLL160M'",
       "'-D ST7262_PANEL_CONFIG_TIMINGS_PCLK_HZ=(8*1000000)'",

diff --git a/esp32-8048S070N.json b/esp32-8048S070N.json
@@ -18,7 +18,7 @@
       "'-D LCD_HEIGHT=480'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_SPIRAM|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=2'",
+      "'-D GPIO_BCKL=2'",
       "'-D LCD_ST7262_PAR'",
       "'-D ST7262_PANEL_CONFIG_CLK_SRC=LCD_CLK_SRC_PLL160M'",
       "'-D ST7262_PANEL_CONFIG_TIMINGS_PCLK_HZ=(8*1000000)'",

diff --git a/esp32-8048S070R.json b/esp32-8048S070R.json
@@ -18,7 +18,7 @@
       "'-D LCD_HEIGHT=480'",
       "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT)'",
       "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_SPIRAM|MALLOC_CAP_8BIT)'",
-      "'-D BCKL=2'",
+      "'-D GPIO_BCKL=2'",
       "'-D LCD_ST7262_PAR'",
       "'-D ST7262_PANEL_CONFIG_CLK_SRC=LCD_CLK_SRC_PLL160M'",
       "'-D ST7262_PANEL_CONFIG_TIMINGS_PCLK_HZ=16000000'",