kernel.spec

# A spec file for building xenlinux Dom0 kernel for Qubes
# Based on the Open SUSE kernel-spec & Fedora kernel-spec.
#

%if 0%{?qubes_builder}
%define _sourcedir %(pwd)
%endif

#%define _unpackaged_files_terminate_build 0
%define variant pvops.qubes
%define plainrel %(cat rel)
%define rel %{plainrel}.%{variant}
%define version %(cat version)

%define _buildshell /bin/bash
%define build_xen       1

%global cpu_arch x86_64
%define cpu_arch_flavor %cpu_arch

%define kernelrelease %(echo %{version} | sed 's/^3\\.[0-9]\\+$/\\0.0/')-%rel.%cpu_arch
%define my_builddir %_builddir/%{name}-%{version}

%define build_src_dir %my_builddir/linux-%version
%define src_install_dir /usr/src/kernels/%kernelrelease
%define kernel_build_dir %my_builddir/linux-obj
%define vm_install_dir /var/lib/qubes/vm-kernels/%version-%{plainrel}

%(chmod +x %_sourcedir/{guards,apply-patches,check-for-config-changes})

%define install_vdso 1
%define debuginfodir /usr/lib/debug

# If you want to build debuginfo package, enable also CONFIG_DEBUG_INFO in %%setup section
# Otherwise debuginfo build is disabled by default to save disk space (it needs 2-3GB build time)
%global debug_package %{nil}

Name:           kernel
Summary:        The Xen Kernel
Version:        %{version}
Epoch:          1000
Release:        %{rel}
License:        GPL v2 only
Group:          System/Kernel
Url:            http://www.kernel.org/
AutoReqProv:    on
BuildRequires:  coreutils module-init-tools sparse
BuildRequires:  qubes-kernel-vm-support
BuildRequires:  dracut
BuildRequires:  busybox
BuildRequires:  bc
Provides:       multiversion(kernel)
Provides:       %name = %kernelrelease

Provides:       kernel-xen-dom0
Provides:       kernel-qubes-dom0
Provides:       kernel-qubes-dom0-pvops
Provides:       kernel-drm = 4.3.0
Provides:       kernel-drm-nouveau = 16
Provides:       kernel-modules-extra = %kernelrelease
Provides:       kernel-modeset = 1

Requires(pre):  coreutils gawk
Requires(post): dracut binutils
Requires:       qubes-core-dom0-linux-kernel-install

Conflicts:      sysfsutils < 2.0
# root-lvm only works with newer udevs
Conflicts:      udev < 118
Conflicts:      lvm2 < 2.02.33
Provides:       kernel = %kernelrelease
Provides:       kernel-uname-r = %kernelrelease

Source0:        linux-%version.tar.xz
Source14:       series.conf
Source16:       guards
Source17:       apply-patches
Source33:       check-for-config-changes
Source100:      config
# FIXME: Including dirs this way does NOT produce proper src.rpms
Source204:      patches.rpmify
Source205:      patches.xen
Source300:      patches.qubes
BuildRoot:      %{_tmppath}/%{name}-%{version}-build
ExclusiveArch:  x86_64

%description
Qubes Dom0 kernel.

%prep
if ! [ -e %_sourcedir/linux-%version.tar.xz ]; then
    echo "The %name-%version.nosrc.rpm package does not contain the" \
         "complete sources. Please install kernel-source-%version.src.rpm."
    exit 1
fi

SYMBOLS="xen-dom0 pvops"

# Unpack all sources and patches
%setup -q -c -T -a 0

mkdir -p %kernel_build_dir

cd linux-%version

if [ -r %_sourcedir/series-%{version}.conf ]; then
    %_sourcedir/apply-patches %_sourcedir/series-%{version}.conf %_sourcedir $SYMBOLS
else
    %_sourcedir/apply-patches %_sourcedir/series.conf %_sourcedir $SYMBOLS
fi

cd %kernel_build_dir

if [ -f %_sourcedir/config-%{version} ]; then
    cp %_sourcedir/config-%{version} .config
else
    cp %_sourcedir/config .config
fi

%build_src_dir/scripts/config \
        --set-str CONFIG_LOCALVERSION -%release.%cpu_arch \
        --disable CONFIG_DEBUG_INFO
#       --enable  CONFIG_DEBUG_INFO \
#       --disable  CONFIG_DEBUG_INFO_REDUCED
# Enabling CONFIG_DEBUG_INFO produces *huge* packages!

MAKE_ARGS="$MAKE_ARGS -C %build_src_dir O=$PWD"
if test -e %_sourcedir/TOLERATE-UNKNOWN-NEW-CONFIG-OPTIONS; then
    yes '' | make oldconfig $MAKE_ARGS
else
    cp .config .config.orig
    make silentoldconfig $MAKE_ARGS < /dev/null
    %_sourcedir/check-for-config-changes .config.orig .config
    rm .config.orig
fi

make prepare $MAKE_ARGS
make scripts $MAKE_ARGS
make scripts_basic $MAKE_ARGS
krel=$(make -s kernelrelease $MAKE_ARGS)

if [ "$krel" != "%kernelrelease" ]; then
    echo "Kernel release mismatch: $krel != %kernelrelease" >&2
    exit 1
fi

make clean $MAKE_ARGS

rm -f source
find . ! -type d -printf '%%P\n' > %my_builddir/obj-files
u2mfn_ver=`dkms status u2mfn|tail -n 1|cut -f 2 -d ' '|tr -d ':,:'`
rm -rf %_builddir/u2mfn
cp -r /usr/src/u2mfn-$u2mfn_ver %_builddir/u2mfn

%build

cd %kernel_build_dir

# This override tweaks the kernel makefiles so that we run debugedit on an
# object before embedding it.  When we later run find-debuginfo.sh, it will
# run debugedit again.  The edits it does change the build ID bits embedded
# in the stripped object, but repeating debugedit is a no-op.  We do it
# beforehand to get the proper final build ID bits into the embedded image.
# This affects the vDSO images in vmlinux, and the vmlinux image in bzImage.
export AFTER_LINK=\
'sh -xc "/usr/lib/rpm/debugedit -b $$RPM_BUILD_DIR -d /usr/src/debug \
                    -i $@ > $@.id"'

make %{?_smp_mflags} all $MAKE_ARGS CONFIG_DEBUG_SECTION_MISMATCH=y

# Build u2mfn module
make -C %kernel_build_dir M=%_builddir/u2mfn modules

%install

# get rid of /usr/lib/rpm/brp-strip-debug
# strip removes too much from the vmlinux ELF binary
export NO_BRP_STRIP_DEBUG=true
export STRIP_KEEP_SYMTAB='*/vmlinux-*'

# /lib/modules/%kernelrelease-%build_flavor/build will be a stale symlink until the
# kernel-devel package is installed. Don't check for stale symlinks
# in the brp-symlink check:
export NO_BRP_STALE_LINK_ERROR=yes

cd %kernel_build_dir

mkdir -p %buildroot/boot
cp -p System.map %buildroot/boot/System.map-%kernelrelease
cp -p arch/x86/boot/bzImage %buildroot/boot/vmlinuz-%kernelrelease
cp .config %buildroot/boot/config-%kernelrelease

%if %install_vdso
# Install the unstripped vdso's that are linked in the kernel image
make vdso_install $MAKE_ARGS INSTALL_MOD_PATH=%buildroot
%endif

# Create a dummy initramfs with roughly the size the real one will have.
# That way, rpm will know that this package requires some additional
# space in /boot.
dd if=/dev/zero of=%buildroot/boot/initramfs-%kernelrelease.img \
        bs=1M count=20

gzip -c9 < Module.symvers > %buildroot/boot/symvers-%kernelrelease.gz

make modules_install $MAKE_ARGS INSTALL_MOD_PATH=%buildroot
make modules_install $MAKE_ARGS INSTALL_MOD_PATH=%buildroot M=%_builddir/u2mfn

mkdir -p %buildroot/%src_install_dir

rm -f %buildroot/lib/modules/%kernelrelease/build
rm -f %buildroot/lib/modules/%kernelrelease/source
mkdir -p %buildroot/lib/modules/%kernelrelease/build
(cd %buildroot/lib/modules/%kernelrelease ; ln -s build source)
# dirs for additional modules per module-init-tools, kbuild/modules.txt
mkdir -p %buildroot/lib/modules/%kernelrelease/extra
mkdir -p %buildroot/lib/modules/%kernelrelease/updates
mkdir -p %buildroot/lib/modules/%kernelrelease/weak-updates

pushd %build_src_dir
cp --parents `find  -type f -name "Makefile*" -o -name "Kconfig*"` %buildroot/lib/modules/%kernelrelease/build
cp -a scripts %buildroot/lib/modules/%kernelrelease/build
cp -a --parents arch/x86/include %buildroot/lib/modules/%kernelrelease/build/
cp -a include %buildroot/lib/modules/%kernelrelease/build/include
popd

cp Module.symvers %buildroot/lib/modules/%kernelrelease/build
cp System.map %buildroot/lib/modules/%kernelrelease/build
if [ -s Module.markers ]; then
cp Module.markers %buildroot/lib/modules/%kernelrelease/build
fi

rm -rf %buildroot/lib/modules/%kernelrelease/build/Documentation
cp .config %buildroot/lib/modules/%kernelrelease/build

rm -f %buildroot/lib/modules/%kernelrelease/build/scripts/*.o
rm -f %buildroot/lib/modules/%kernelrelease/build/scripts/*/*.o

cp -a scripts/* %buildroot/lib/modules/%kernelrelease/build/scripts/
cp -a include/* %buildroot/lib/modules/%kernelrelease/build/include/
cp -a --parents arch/x86/include/* %buildroot/lib/modules/%kernelrelease/build/

# Copy .config to include/config/auto.conf so "make prepare" is unnecessary.
cp %buildroot/lib/modules/%kernelrelease/build/.config %buildroot/lib/modules/%kernelrelease/build/include/config/auto.conf

# Make sure the Makefile and version.h have a matching timestamp so that
# external modules can be built
touch -r %buildroot/lib/modules/%kernelrelease/build/Makefile %buildroot/lib/modules/%kernelrelease/build/include/generated/uapi/linux/version.h
touch -r %buildroot/lib/modules/%kernelrelease/build/.config %buildroot/lib/modules/%kernelrelease/build/include/config/auto.conf

if test -s vmlinux.id; then
cp vmlinux.id %buildroot/lib/modules/%kernelrelease/build/vmlinux.id
else
echo >&2 "*** WARNING *** no vmlinux build ID! ***"
fi

#
# save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
#
mkdir -p %buildroot%{debuginfodir}/lib/modules/%kernelrelease
cp vmlinux %buildroot%{debuginfodir}/lib/modules/%kernelrelease

find %buildroot/lib/modules/%kernelrelease -name "*.ko" -type f >modnames

# mark modules executable so that strip-to-file can strip them
xargs --no-run-if-empty chmod u+x < modnames

# Generate a list of modules for block and networking.

fgrep /drivers/ modnames | xargs --no-run-if-empty nm -upA |
sed -n 's,^.*/\([^/]*\.ko\):  *U \(.*\)$,\1 \2,p' > drivers.undef

collect_modules_list()
{
  sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
  LC_ALL=C sort -u > %buildroot/lib/modules/%kernelrelease/modules.$1
}

collect_modules_list networking \
                         'register_netdev|ieee80211_register_hw|usbnet_probe'
collect_modules_list block \
                         'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler'
collect_modules_list drm \
                         'drm_open|drm_init'
collect_modules_list modesetting \
                         'drm_crtc_init'

# detect missing or incorrect license tags
rm -f modinfo
while read i
do
  echo -n "${i#%buildroot/lib/modules/%kernelrelease/} " >> modinfo
  /sbin/modinfo -l $i >> modinfo
done < modnames

egrep -v \
          'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' \
          modinfo && exit 1

rm -f modinfo modnames

# Move the devel headers out of the root file system
mkdir -p %buildroot/usr/src/kernels
mv %buildroot/lib/modules/%kernelrelease/build/* %buildroot/%src_install_dir/
mv %buildroot/lib/modules/%kernelrelease/build/.config %buildroot/%src_install_dir
rmdir %buildroot/lib/modules/%kernelrelease/build
ln -sf %src_install_dir %buildroot/lib/modules/%kernelrelease/build

# Abort if there are any undefined symbols
msg="$(/sbin/depmod -F %buildroot/boot/System.map-%kernelrelease \
     -b %buildroot -ae %kernelrelease 2>&1)"

if [ $? -ne 0 ] || echo "$msg" | grep  'needs unknown symbol'; then
exit 1
fi

# in case of no firmware built - place empty dir
mkdir -p %buildroot/lib/firmware
mv  %buildroot/lib/firmware %buildroot/lib/firmware-all
mkdir -p %buildroot/lib/firmware
mv  %buildroot/lib/firmware-all %buildroot/lib/firmware/%kernelrelease

# Prepare initramfs for Qubes VM
mkdir -p %buildroot/%vm_install_dir
/sbin/dracut --nomdadmconf --nolvmconf \
    --kmoddir %buildroot/lib/modules/%kernelrelease \
    --modules "kernel-modules qubes-vm-simple" \
    --conf /dev/null --confdir /var/empty \
    -d "xenblk xen-blkfront cdrom ext4 jbd2 crc16 dm_snapshot" \
    %buildroot/%vm_install_dir/initramfs %kernelrelease

cp -p arch/x86/boot/bzImage %buildroot/%vm_install_dir/vmlinuz

# Modules for Qubes VM
mkdir -p %buildroot%vm_install_dir/modules
cp -a %buildroot/lib/modules/%kernelrelease %buildroot%vm_install_dir/modules/
mkdir -p %buildroot%vm_install_dir/modules/firmware
cp -a %buildroot/lib/firmware/%kernelrelease %buildroot%vm_install_dir/modules/firmware/

# remove files that will be auto generated by depmod at rpm -i time
for i in alias alias.bin ccwmap dep dep.bin ieee1394map inputmap isapnpmap ofmap pcimap seriomap symbols symbols.bin usbmap
do
  rm -f %buildroot/lib/modules/%kernelrelease/modules.$i
done

%post
/sbin/depmod -a %{kernelrelease}

%posttrans
/bin/kernel-install add %{kernelrelease} /boot/vmlinuz-%{kernelrelease} || exit $?

# grubby (used by new-kernel-pkg) do not understand xen entries in grub2 config
if [ -x /sbin/new-kernel-pkg -a -e /boot/grub2/grub.cfg ]; then
        grub2-mkconfig > /boot/grub2/grub.cfg
fi

%preun
/bin/kernel-install remove %{kernelrelease} /boot/vmlinuz-%{kernelrelease} || exit $?

%files
%defattr(-, root, root)
%ghost /boot/initramfs-%{kernelrelease}.img
/boot/System.map-%{kernelrelease}
/boot/config-%{kernelrelease}
/boot/symvers-%kernelrelease.gz
%attr(0644, root, root) /boot/vmlinuz-%{kernelrelease}
/lib/firmware/%{kernelrelease}
/lib/modules/%{kernelrelease}

%package devel
Summary:        Development files necessary for building kernel modules
License:        GPL v2 only
Group:          Development/Sources
Provides:       multiversion(kernel)
Provides:       %name-devel = %kernelrelease
Provides:       kernel-devel-uname-r = %kernelrelease
AutoReqProv:    on

%description devel
This package contains files necessary for building kernel modules (and
kernel module packages) against the kernel.

%post devel
if [ -f /etc/sysconfig/kernel ]
then
    . /etc/sysconfig/kernel || exit $?
fi
if [ "$HARDLINK" != "no" -a -x /usr/sbin/hardlink ]
then
    (cd /usr/src/kernels/%{kernelrelease} &&
     /usr/bin/find . -type f | while read f; do
       hardlink -c /usr/src/kernels/*.fc*.*/$f $f
     done)
fi


%files devel
%defattr(-,root,root)
/usr/src/kernels/%{kernelrelease}


%package qubes-vm
Summary:        The Xen Kernel
Version:        %{version}
Release:        %{rel}
License:        GPL v2 only
Group:          System/Kernel
Url:            http://www.kernel.org/
AutoReqProv:    on
BuildRequires:  coreutils module-init-tools sparse
Provides:       multiversion(kernel-qubes-vm)

Provides:       kernel-xen-domU
Provides:       kernel-qubes-domU

Requires(pre):  coreutils gawk
Requires(post): dracut
Requires(post): qubes-core-dom0

Conflicts:      sysfsutils < 2.0
# root-lvm only works with newer udevs
Conflicts:      udev < 118
Conflicts:      lvm2 < 2.02.33
Provides:       kernel-qubes-vm = %kernelrelease

%description qubes-vm
Qubes domU kernel.

%post qubes-vm

mkdir /tmp/qubes-modules-%kernelrelease
truncate -s 400M /tmp/qubes-modules-%kernelrelease.img
mkfs -t ext3 -F /tmp/qubes-modules-%kernelrelease.img > /dev/null
mount /tmp/qubes-modules-%kernelrelease.img /tmp/qubes-modules-%kernelrelease -o loop
cp -a -t /tmp/qubes-modules-%kernelrelease %vm_install_dir/modules/%kernelrelease
mkdir /tmp/qubes-modules-%kernelrelease/firmware
cp -a -t /tmp/qubes-modules-%kernelrelease/firmware %vm_install_dir/modules/firmware/%kernelrelease
umount /tmp/qubes-modules-%kernelrelease
rmdir /tmp/qubes-modules-%kernelrelease
mv /tmp/qubes-modules-%kernelrelease.img %vm_install_dir/modules.img

# If qubes-prefs isn't installed yet, the default kernel will be set by %post
# of qubes-core-dom0
type qubes-prefs &>/dev/null && qubes-prefs --set default-kernel %version-%plainrel

exit 0

%preun qubes-vm

if [ "`qubes-prefs -g default-kernel`" == "%version-%plainrel" ]; then
    echo "This kernel version is set as default VM kernel, cannot remove"
    exit 1
fi
if qvm-ls --kernel | grep -qw "%version-%plainrel"; then
    echo "This kernel version is used by at least one VM, cannot remove"
    exit 1
fi

exit 0

%files qubes-vm
%defattr(-, root, root)
%dir %vm_install_dir
%ghost %attr(0644, root, root) %vm_install_dir/modules.img
%attr(0644, root, root) %vm_install_dir/initramfs
%attr(0644, root, root) %vm_install_dir/vmlinuz
%vm_install_dir/modules


%changelog