idt.rs

// Copyright 2017 Philipp Oppermann. See the README.md
// file at the top-level directory of this distribution.
//
// Licensed under the Apache License, Version 2.0 <LICENSE-APACHE or
// http://www.apache.org/licenses/LICENSE-2.0> or the MIT license
// <LICENSE-MIT or http://opensource.org/licenses/MIT>, at your
// option. This file may not be copied, modified, or distributed
// except according to those terms.

//! Provides types for the Interrupt Descriptor Table and its entries.
//!
//! # For the builds without the `abi_x86_interrupt` feature
//! The following types are opaque and non-constructable instead of function pointers.
//!
//! - [`DivergingHandlerFunc`]
//! - [`DivergingHandlerFuncWithErrCode`]
//! - [`HandlerFunc`]
//! - [`HandlerFuncWithErrCode`]
//! - [`PageFaultHandlerFunc`]
//!
//! These types are defined for the compatibility with the Nightly Rust build.

use crate::{PrivilegeLevel, VirtAddr};
use bit_field::BitField;
use bitflags::bitflags;
use core::fmt;
use core::marker::PhantomData;
use core::ops::Bound::{Excluded, Included, Unbounded};
use core::ops::{Deref, Index, IndexMut, RangeBounds};
use volatile::Volatile;

/// An Interrupt Descriptor Table with 256 entries.
///
/// The first 32 entries are used for CPU exceptions. These entries can be either accessed through
/// fields on this struct or through an index operation, e.g. `idt[0]` returns the
/// first entry, the entry for the `divide_error` exception. Note that the index access is
/// not possible for entries for which an error code is pushed.
///
/// The remaining entries are used for interrupts. They can be accesed through index
/// operations on the idt, e.g. `idt[32]` returns the first interrupt entry, which is the 32nd IDT
/// entry).
///
///
/// The field descriptions are taken from the
/// [AMD64 manual volume 2](https://support.amd.com/TechDocs/24593.pdf)
/// (with slight modifications).
#[derive(Clone, Debug)]
#[repr(C)]
#[repr(align(16))]
pub struct InterruptDescriptorTable {
    /// A divide error (`#DE`) occurs when the denominator of a DIV instruction or
    /// an IDIV instruction is 0. A `#DE` also occurs if the result is too large to be
    /// represented in the destination.
    ///
    /// The saved instruction pointer points to the instruction that caused the `#DE`.
    ///
    /// The vector number of the `#DE` exception is 0.
    pub divide_error: Entry<HandlerFunc>,

    /// When the debug-exception mechanism is enabled, a `#DB` exception can occur under any
    /// of the following circumstances:
    ///
    /// <details>
    ///
    /// - Instruction execution.
    /// - Instruction single stepping.
    /// - Data read.
    /// - Data write.
    /// - I/O read.
    /// - I/O write.
    /// - Task switch.
    /// - Debug-register access, or general detect fault (debug register access when DR7.GD=1).
    /// - Executing the INT1 instruction (opcode 0F1h).
    ///
    /// </details>
    ///
    /// `#DB` conditions are enabled and disabled using the debug-control register, `DR7`
    /// and `RFLAGS.TF`.
    ///
    /// In the following cases, the saved instruction pointer points to the instruction that
    /// caused the `#DB`:
    ///
    /// - Instruction execution.
    /// - Invalid debug-register access, or general detect.
    ///
    /// In all other cases, the instruction that caused the `#DB` is completed, and the saved
    /// instruction pointer points to the instruction after the one that caused the `#DB`.
    ///
    /// The vector number of the `#DB` exception is 1.
    pub debug: Entry<HandlerFunc>,

    /// An non maskable interrupt exception (NMI) occurs as a result of system logic
    /// signaling a non-maskable interrupt to the processor.
    ///
    /// The processor recognizes an NMI at an instruction boundary.
    /// The saved instruction pointer points to the instruction immediately following the
    /// boundary where the NMI was recognized.
    ///
    /// The vector number of the NMI exception is 2.
    pub non_maskable_interrupt: Entry<HandlerFunc>,

    /// A breakpoint (`#BP`) exception occurs when an `INT3` instruction is executed. The
    /// `INT3` is normally used by debug software to set instruction breakpoints by replacing
    ///
    /// The saved instruction pointer points to the byte after the `INT3` instruction.
    ///
    /// The vector number of the `#BP` exception is 3.
    pub breakpoint: Entry<HandlerFunc>,

    /// An overflow exception (`#OF`) occurs as a result of executing an `INTO` instruction
    /// while the overflow bit in `RFLAGS` is set to 1.
    ///
    /// The saved instruction pointer points to the instruction following the `INTO`
    /// instruction that caused the `#OF`.
    ///
    /// The vector number of the `#OF` exception is 4.
    pub overflow: Entry<HandlerFunc>,

    /// A bound-range exception (`#BR`) exception can occur as a result of executing
    /// the `BOUND` instruction. The `BOUND` instruction compares an array index (first
    /// operand) with the lower bounds and upper bounds of an array (second operand).
    /// If the array index is not within the array boundary, the `#BR` occurs.
    ///
    /// The saved instruction pointer points to the `BOUND` instruction that caused the `#BR`.
    ///
    /// The vector number of the `#BR` exception is 5.
    pub bound_range_exceeded: Entry<HandlerFunc>,

    /// An invalid opcode exception (`#UD`) occurs when an attempt is made to execute an
    /// invalid or undefined opcode. The validity of an opcode often depends on the
    /// processor operating mode.
    ///
    /// <details><summary>A `#UD` occurs under the following conditions:</summary>
    ///
    /// - Execution of any reserved or undefined opcode in any mode.
    /// - Execution of the `UD2` instruction.
    /// - Use of the `LOCK` prefix on an instruction that cannot be locked.
    /// - Use of the `LOCK` prefix on a lockable instruction with a non-memory target location.
    /// - Execution of an instruction with an invalid-operand type.
    /// - Execution of the `SYSENTER` or `SYSEXIT` instructions in long mode.
    /// - Execution of any of the following instructions in 64-bit mode: `AAA`, `AAD`,
    ///   `AAM`, `AAS`, `BOUND`, `CALL` (opcode 9A), `DAA`, `DAS`, `DEC`, `INC`, `INTO`,
    ///   `JMP` (opcode EA), `LDS`, `LES`, `POP` (`DS`, `ES`, `SS`), `POPA`, `PUSH` (`CS`,
    ///   `DS`, `ES`, `SS`), `PUSHA`, `SALC`.
    /// - Execution of the `ARPL`, `LAR`, `LLDT`, `LSL`, `LTR`, `SLDT`, `STR`, `VERR`, or
    ///   `VERW` instructions when protected mode is not enabled, or when virtual-8086 mode
    ///   is enabled.
    /// - Execution of any legacy SSE instruction when `CR4.OSFXSR` is cleared to 0.
    /// - Execution of any SSE instruction (uses `YMM`/`XMM` registers), or 64-bit media
    /// instruction (uses `MMXTM` registers) when `CR0.EM` = 1.
    /// - Execution of any SSE floating-point instruction (uses `YMM`/`XMM` registers) that
    /// causes a numeric exception when `CR4.OSXMMEXCPT` = 0.
    /// - Use of the `DR4` or `DR5` debug registers when `CR4.DE` = 1.
    /// - Execution of `RSM` when not in `SMM` mode.
    ///
    /// </details>
    ///
    /// The saved instruction pointer points to the instruction that caused the `#UD`.
    ///
    /// The vector number of the `#UD` exception is 6.
    pub invalid_opcode: Entry<HandlerFunc>,

    /// A device not available exception (`#NM`) occurs under any of the following conditions:
    ///
    /// <details>
    ///
    /// - An `FWAIT`/`WAIT` instruction is executed when `CR0.MP=1` and `CR0.TS=1`.
    /// - Any x87 instruction other than `FWAIT` is executed when `CR0.EM=1`.
    /// - Any x87 instruction is executed when `CR0.TS=1`. The `CR0.MP` bit controls whether the
    ///   `FWAIT`/`WAIT` instruction causes an `#NM` exception when `TS=1`.
    /// - Any 128-bit or 64-bit media instruction when `CR0.TS=1`.
    ///
    /// </details>
    ///
    /// The saved instruction pointer points to the instruction that caused the `#NM`.
    ///
    /// The vector number of the `#NM` exception is 7.
    pub device_not_available: Entry<HandlerFunc>,

    /// A double fault (`#DF`) exception can occur when a second exception occurs during
    /// the handling of a prior (first) exception or interrupt handler.
    ///
    /// <details>
    ///
    /// Usually, the first and second exceptions can be handled sequentially without
    /// resulting in a `#DF`. In this case, the first exception is considered _benign_, as
    /// it does not harm the ability of the processor to handle the second exception. In some
    /// cases, however, the first exception adversely affects the ability of the processor to
    /// handle the second exception. These exceptions contribute to the occurrence of a `#DF`,
    /// and are called _contributory exceptions_. The following exceptions are contributory:
    ///
    /// - Invalid-TSS Exception
    /// - Segment-Not-Present Exception
    /// - Stack Exception
    /// - General-Protection Exception
    ///
    /// A double-fault exception occurs in the following cases:
    ///
    /// - If a contributory exception is followed by another contributory exception.
    /// - If a divide-by-zero exception is followed by a contributory exception.
    /// - If a page  fault is followed by another page fault or a contributory exception.
    ///
    /// If a third interrupting event occurs while transferring control to the `#DF` handler,
    /// the processor shuts down.
    ///
    /// </details>
    ///
    /// The returned error code is always zero. The saved instruction pointer is undefined,
    /// and the program cannot be restarted.
    ///
    /// The vector number of the `#DF` exception is 8.
    pub double_fault: Entry<DivergingHandlerFuncWithErrCode>,

    /// This interrupt vector is reserved. It is for a discontinued exception originally used
    /// by processors that supported external x87-instruction coprocessors. On those processors,
    /// the exception condition is caused by an invalid-segment or invalid-page access on an
    /// x87-instruction coprocessor-instruction operand. On current processors, this condition
    /// causes a general-protection exception to occur.
    coprocessor_segment_overrun: Entry<HandlerFunc>,

    /// An invalid TSS exception (`#TS`) occurs only as a result of a control transfer through
    /// a gate descriptor that results in an invalid stack-segment reference using an `SS`
    /// selector in the TSS.
    ///
    /// The returned error code is the `SS` segment selector. The saved instruction pointer
    /// points to the control-transfer instruction that caused the `#TS`.
    ///
    /// The vector number of the `#TS` exception is 10.
    pub invalid_tss: Entry<HandlerFuncWithErrCode>,

    /// An segment-not-present exception (`#NP`) occurs when an attempt is made to load a
    /// segment or gate with a clear present bit.
    ///
    /// The returned error code is the segment-selector index of the segment descriptor
    /// causing the `#NP` exception. The saved instruction pointer points to the instruction
    /// that loaded the segment selector resulting in the `#NP`.
    ///
    /// The vector number of the `#NP` exception is 11.
    pub segment_not_present: Entry<HandlerFuncWithErrCode>,

    /// An stack segment exception (`#SS`) can occur in the following situations:
    ///
    /// - Implied stack references in which the stack address is not in canonical
    ///   form. Implied stack references include all push and pop instructions, and any
    ///   instruction using `RSP` or `RBP` as a base register.
    /// - Attempting to load a stack-segment selector that references a segment descriptor
    ///   containing a clear present bit.
    /// - Any stack access that fails the stack-limit check.
    ///
    /// The returned error code depends on the cause of the `#SS`. If the cause is a cleared
    /// present bit, the error code is the corresponding segment selector. Otherwise, the
    /// error code is zero. The saved instruction pointer points to the instruction that
    /// caused the `#SS`.
    ///
    /// The vector number of the `#NP` exception is 12.
    pub stack_segment_fault: Entry<HandlerFuncWithErrCode>,

    /// A general protection fault (`#GP`) can occur in various situations. Common causes include:
    ///
    /// - Executing a privileged instruction while `CPL > 0`.
    /// - Writing a 1 into any register field that is reserved, must be zero (MBZ).
    /// - Attempting to execute an SSE instruction specifying an unaligned memory operand.
    /// - Loading a non-canonical base address into the `GDTR` or `IDTR`.
    /// - Using WRMSR to write a read-only MSR.
    /// - Any long-mode consistency-check violation.
    ///
    /// The returned error code is a segment selector, if the cause of the `#GP` is
    /// segment-related, and zero otherwise. The saved instruction pointer points to
    /// the instruction that caused the `#GP`.
    ///
    /// The vector number of the `#GP` exception is 13.
    pub general_protection_fault: Entry<HandlerFuncWithErrCode>,

    /// A page fault (`#PF`) can occur during a memory access in any of the following situations:
    ///
    /// - A page-translation-table entry or physical page involved in translating the memory
    ///   access is not present in physical memory. This is indicated by a cleared present
    ///   bit in the translation-table entry.
    /// - An attempt is made by the processor to load the instruction TLB with a translation
    ///   for a non-executable page.
    /// - The memory access fails the paging-protection checks (user/supervisor, read/write,
    ///   or both).
    /// - A reserved bit in one of the page-translation-table entries is set to 1. A `#PF`
    ///   occurs for this reason only when `CR4.PSE=1` or `CR4.PAE=1`.
    ///
    /// The virtual (linear) address that caused the `#PF` is stored in the `CR2` register.
    /// The saved instruction pointer points to the instruction that caused the `#PF`.
    ///
    /// The page-fault error code is described by the
    /// [`PageFaultErrorCode`](struct.PageFaultErrorCode.html) struct.
    ///
    /// The vector number of the `#PF` exception is 14.
    pub page_fault: Entry<PageFaultHandlerFunc>,

    /// vector nr. 15
    reserved_1: Entry<HandlerFunc>,

    /// The x87 Floating-Point Exception-Pending exception (`#MF`) is used to handle unmasked x87
    /// floating-point exceptions. In 64-bit mode, the x87 floating point unit is not used
    /// anymore, so this exception is only relevant when executing programs in the 32-bit
    /// compatibility mode.
    ///
    /// The vector number of the `#MF` exception is 16.
    pub x87_floating_point: Entry<HandlerFunc>,

    /// An alignment check exception (`#AC`) occurs when an unaligned-memory data reference
    /// is performed while alignment checking is enabled. An `#AC` can occur only when CPL=3.
    ///
    /// The returned error code is always zero. The saved instruction pointer points to the
    /// instruction that caused the `#AC`.
    ///
    /// The vector number of the `#AC` exception is 17.
    pub alignment_check: Entry<HandlerFuncWithErrCode>,

    /// The machine check exception (`#MC`) is model specific. Processor implementations
    /// are not required to support the `#MC` exception, and those implementations that do
    /// support `#MC` can vary in how the `#MC` exception mechanism works.
    ///
    /// There is no reliable way to restart the program.
    ///
    /// The vector number of the `#MC` exception is 18.
    pub machine_check: Entry<DivergingHandlerFunc>,

    /// The SIMD Floating-Point Exception (`#XF`) is used to handle unmasked SSE
    /// floating-point exceptions. The SSE floating-point exceptions reported by
    /// the `#XF` exception are (including mnemonics):
    ///
    /// - IE: Invalid-operation exception (also called #I).
    /// - DE: Denormalized-operand exception (also called #D).
    /// - ZE: Zero-divide exception (also called #Z).
    /// - OE: Overflow exception (also called #O).
    /// - UE: Underflow exception (also called #U).
    /// - PE: Precision exception (also called #P or inexact-result exception).
    ///
    /// The saved instruction pointer points to the instruction that caused the `#XF`.
    ///
    /// The vector number of the `#XF` exception is 19.
    pub simd_floating_point: Entry<HandlerFunc>,

    /// vector nr. 20
    pub virtualization: Entry<HandlerFunc>,

    /// A #CP exception is generated when shadow stacks are enabled and mismatch
    /// scenarios are detected (possible error code cases below).
    ///
    /// The error code is the #CP error code, for each of the following situations:
    /// - A RET (near) instruction encountered a return address mismatch.
    /// - A RET (far) instruction encountered a return address mismatch.
    /// - A RSTORSSP instruction encountered an invalid shadow stack restore token.
    /// - A SETSSBY instruction encountered an invalid supervisor shadow stack token.
    ///
    /// vector nr. 21
    pub cp_protection_exception: Entry<HandlerFuncWithErrorCode>,

    /// vector nr. 22-27
    reserved_2: [Entry<HandlerFunc>; 6],

    /// The Hypervisor Injection Exception (`#HV`) is injected by a hypervisor
    /// as a doorbell to inform an `SEV-SNP` enabled guest running with the
    /// `Restricted Injection` feature of events to be processed.
    ///
    /// `SEV-SNP` stands for the _"Secure Nested Paging"_ feature of the _"AMD
    /// Secure Encrypted Virtualization"_  technology. The `Restricted
    /// Injection` feature disables all hypervisor-based interrupt queuing
    /// and event injection of all vectors except #HV.
    ///
    /// The `#HV` exception is a benign exception and can only be injected as
    /// an exception and without an error code. `SEV-SNP` enabled guests are
    /// expected to communicate with the hypervisor about events via a
    /// software-managed para-virtualization interface.
    ///
    /// The vector number of the ``#HV`` exception is 28.
    pub hv_injection_exception: Entry<HandlerFunc>,

    /// The VMM Communication Exception (`#VC`) is always generated by hardware when an `SEV-ES`
    /// enabled guest is running and an `NAE` event occurs.
    ///
    /// `SEV-ES` stands for the _"Encrypted State"_ feature of the _"AMD Secure Encrypted Virtualization"_
    /// technology. `NAE` stands for an _"Non-Automatic Exit"_, which is an `VMEXIT` event that requires
    /// hypervisor emulation. See
    /// [this whitepaper](https://www.amd.com/system/files/TechDocs/Protecting%20VM%20Register%20State%20with%20SEV-ES.pdf)
    /// for an overview of the `SEV-ES` feature.
    ///
    /// The `#VC` exception is a precise, contributory, fault-type exception utilizing exception vector 29.
    /// This exception cannot be masked. The error code of the `#VC` exception is equal
    /// to the `#VMEXIT` code of the event that caused the `NAE`.
    ///
    /// In response to a `#VC` exception, a typical flow would involve the guest handler inspecting the error
    /// code to determine the cause of the exception and deciding what register state must be copied to the
    /// `GHCB` (_"Guest Hypervisor Communication Block"_) for the event to be handled. The handler
    /// should then execute the `VMGEXIT` instruction to
    /// create an `AE` and invoke the hypervisor. After a later `VMRUN`, guest execution will resume after the
    /// `VMGEXIT` instruction where the handler can view the results from the hypervisor and copy state from
    /// the `GHCB` back to its internal state as needed.
    ///
    /// Note that it is inadvisable for the hypervisor to set the `VMCB` (_"Virtual Machine Control Block"_)
    /// intercept bit for the `#VC` exception as
    /// this would prevent proper handling of `NAE`s by the guest. Similarly, the hypervisor should avoid
    /// setting intercept bits for events that would occur in the `#VC` handler (such as `IRET`).
    ///
    /// The vector number of the ``#VC`` exception is 29.
    pub vmm_communication_exception: Entry<HandlerFuncWithErrCode>,

    /// The Security Exception (`#SX`) signals security-sensitive events that occur while
    /// executing the VMM, in the form of an exception so that the VMM may take appropriate
    /// action. (A VMM would typically intercept comparable sensitive events in the guest.)
    /// In the current implementation, the only use of the `#SX` is to redirect external INITs
    /// into an exception so that the VMM may — among other possibilities.
    ///
    /// The only error code currently defined is 1, and indicates redirection of INIT has occurred.
    ///
    /// The vector number of the ``#SX`` exception is 30.
    pub security_exception: Entry<HandlerFuncWithErrCode>,

    /// vector nr. 31
    reserved_3: Entry<HandlerFunc>,

    /// User-defined interrupts can be initiated either by system logic or software. They occur
    /// when:
    ///
    /// - System logic signals an external interrupt request to the processor. The signaling
    ///   mechanism and the method of communicating the interrupt vector to the processor are
    ///   implementation dependent.
    /// - Software executes an `INTn` instruction. The `INTn` instruction operand provides
    ///   the interrupt vector number.
    ///
    /// Both methods can be used to initiate an interrupt into vectors 0 through 255. However,
    /// because vectors 0 through 31 are defined or reserved by the AMD64 architecture,
    /// software should not use vectors in this range for purposes other than their defined use.
    ///
    /// The saved instruction pointer depends on the interrupt source:
    ///
    /// - External interrupts are recognized on instruction boundaries. The saved instruction
    ///   pointer points to the instruction immediately following the boundary where the
    ///   external interrupt was recognized.
    /// - If the interrupt occurs as a result of executing the INTn instruction, the saved
    ///   instruction pointer points to the instruction after the INTn.
    interrupts: [Entry<HandlerFunc>; 256 - 32],
}

impl InterruptDescriptorTable {
    /// Creates a new IDT filled with non-present entries.
    #[inline]
    #[rustversion::attr(since(1.61), const)]
    pub fn new() -> InterruptDescriptorTable {
        InterruptDescriptorTable {
            divide_error: Entry::missing(),
            debug: Entry::missing(),
            non_maskable_interrupt: Entry::missing(),
            breakpoint: Entry::missing(),
            overflow: Entry::missing(),
            bound_range_exceeded: Entry::missing(),
            invalid_opcode: Entry::missing(),
            device_not_available: Entry::missing(),
            double_fault: Entry::missing(),
            coprocessor_segment_overrun: Entry::missing(),
            invalid_tss: Entry::missing(),
            segment_not_present: Entry::missing(),
            stack_segment_fault: Entry::missing(),
            general_protection_fault: Entry::missing(),
            page_fault: Entry::missing(),
            reserved_1: Entry::missing(),
            x87_floating_point: Entry::missing(),
            alignment_check: Entry::missing(),
            machine_check: Entry::missing(),
            simd_floating_point: Entry::missing(),
            virtualization: Entry::missing(),
            cp_protection_exception: Entry::missing(),
            reserved_2: [Entry::missing(); 6],
            hv_injection_exception: Entry::missing(),
            vmm_communication_exception: Entry::missing(),
            security_exception: Entry::missing(),
            reserved_3: Entry::missing(),
            interrupts: [Entry::missing(); 256 - 32],
        }
    }

    /// Resets all entries of this IDT in place.
    #[inline]
    pub fn reset(&mut self) {
        *self = Self::new();
    }

    /// Loads the IDT in the CPU using the `lidt` command.
    #[cfg(feature = "instructions")]
    #[inline]
    pub fn load(&'static self) {
        unsafe { self.load_unsafe() }
    }

    /// Loads the IDT in the CPU using the `lidt` command.
    ///
    /// # Safety
    ///
    /// As long as it is the active IDT, you must ensure that:
    ///
    /// - `self` is never destroyed.
    /// - `self` always stays at the same memory location. It is recommended to wrap it in
    /// a `Box`.
    ///
    #[cfg(feature = "instructions")]
    #[inline]
    pub unsafe fn load_unsafe(&self) {
        use crate::instructions::tables::lidt;
        unsafe {
            lidt(&self.pointer());
        }
    }

    /// Creates the descriptor pointer for this table. This pointer can only be
    /// safely used if the table is never modified or destroyed while in use.
    #[cfg(feature = "instructions")]
    fn pointer(&self) -> crate::structures::DescriptorTablePointer {
        use core::mem::size_of;
        crate::structures::DescriptorTablePointer {
            base: VirtAddr::new(self as *const _ as u64),
            limit: (size_of::<Self>() - 1) as u16,
        }
    }

    /// Returns a normalized and ranged check slice range from a RangeBounds trait object
    ///
    /// Panics if range is outside the range of user interrupts (i.e. greater than 255) or if the entry is an
    /// exception
    fn condition_slice_bounds(&self, bounds: impl RangeBounds<usize>) -> (usize, usize) {
        let lower_idx = match bounds.start_bound() {
            Included(start) => *start,
            Excluded(start) => *start + 1,
            Unbounded => 0,
        };
        let upper_idx = match bounds.end_bound() {
            Included(end) => *end + 1,
            Excluded(end) => *end,
            Unbounded => 256,
        };

        if lower_idx > 256 || upper_idx > 256 {
            panic!("Index out of range [{}..{}]", lower_idx, upper_idx);
        }
        if lower_idx < 32 {
            panic!("Cannot return slice from traps, faults, and exception handlers");
        }
        (lower_idx, upper_idx)
    }

    /// Returns slice of IDT entries with the specified range.
    ///
    /// Panics if range is outside the range of user interrupts (i.e. greater than 255) or if the entry is an
    /// exception
    #[inline]
    pub fn slice(&self, bounds: impl RangeBounds<usize>) -> &[Entry<HandlerFunc>] {
        let (lower_idx, upper_idx) = self.condition_slice_bounds(bounds);
        &self.interrupts[(lower_idx - 32)..(upper_idx - 32)]
    }

    /// Returns a mutable slice of IDT entries with the specified range.
    ///
    /// Panics if range is outside the range of user interrupts (i.e. greater than 255) or if the entry is an
    /// exception
    #[inline]
    pub fn slice_mut(&mut self, bounds: impl RangeBounds<usize>) -> &mut [Entry<HandlerFunc>] {
        let (lower_idx, upper_idx) = self.condition_slice_bounds(bounds);
        &mut self.interrupts[(lower_idx - 32)..(upper_idx - 32)]
    }
}

impl Index<usize> for InterruptDescriptorTable {
    type Output = Entry<HandlerFunc>;

    /// Returns the IDT entry with the specified index.
    ///
    /// Panics if index is outside the IDT (i.e. greater than 255) or if the entry is an
    /// exception that pushes an error code (use the struct fields for accessing these entries).
    #[inline]
    fn index(&self, index: usize) -> &Self::Output {
        match index {
            0 => &self.divide_error,
            1 => &self.debug,
            2 => &self.non_maskable_interrupt,
            3 => &self.breakpoint,
            4 => &self.overflow,
            5 => &self.bound_range_exceeded,
            6 => &self.invalid_opcode,
            7 => &self.device_not_available,
            9 => &self.coprocessor_segment_overrun,
            16 => &self.x87_floating_point,
            19 => &self.simd_floating_point,
            20 => &self.virtualization,
            i @ 32..=255 => &self.interrupts[i - 32],
            i @ 15 | i @ 31 | i @ 21..=28 => panic!("entry {} is reserved", i),
            i @ 8 | i @ 10..=14 | i @ 17 | i @ 29 | i @ 30 => {
                panic!("entry {} is an exception with error code", i)
            }
            i @ 18 => panic!("entry {} is an diverging exception (must not return)", i),
            i => panic!("no entry with index {}", i),
        }
    }
}

impl IndexMut<usize> for InterruptDescriptorTable {
    /// Returns a mutable reference to the IDT entry with the specified index.
    ///
    /// Panics if index is outside the IDT (i.e. greater than 255) or if the entry is an
    /// exception that pushes an error code (use the struct fields for accessing these entries).
    #[inline]
    fn index_mut(&mut self, index: usize) -> &mut Self::Output {
        match index {
            0 => &mut self.divide_error,
            1 => &mut self.debug,
            2 => &mut self.non_maskable_interrupt,
            3 => &mut self.breakpoint,
            4 => &mut self.overflow,
            5 => &mut self.bound_range_exceeded,
            6 => &mut self.invalid_opcode,
            7 => &mut self.device_not_available,
            9 => &mut self.coprocessor_segment_overrun,
            16 => &mut self.x87_floating_point,
            19 => &mut self.simd_floating_point,
            20 => &mut self.virtualization,
            i @ 32..=255 => &mut self.interrupts[i - 32],
            i @ 15 | i @ 31 | i @ 21..=28 => panic!("entry {} is reserved", i),
            i @ 8 | i @ 10..=14 | i @ 17 | i @ 29 | i @ 30 => {
                panic!("entry {} is an exception with error code", i)
            }
            i @ 18 => panic!("entry {} is an diverging exception (must not return)", i),
            i => panic!("no entry with index {}", i),
        }
    }
}

/// An Interrupt Descriptor Table entry.
///
/// The generic parameter can either be `HandlerFunc` or `HandlerFuncWithErrCode`, depending
/// on the interrupt vector.
#[derive(Clone, Copy)]
#[repr(C)]
pub struct Entry<F> {
    pointer_low: u16,
    gdt_selector: u16,
    options: EntryOptions,
    pointer_middle: u16,
    pointer_high: u32,
    reserved: u32,
    phantom: PhantomData<F>,
}

impl<T> fmt::Debug for Entry<T> {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        f.debug_struct("Entry")
            .field("handler_addr", &format_args!("{:#x}", self.handler_addr()))
            .field("gdt_selector", &self.gdt_selector)
            .field("options", &self.options)
            .finish()
    }
}

impl<T> PartialEq for Entry<T> {
    fn eq(&self, other: &Self) -> bool {
        self.pointer_low == other.pointer_low
            && self.gdt_selector == other.gdt_selector
            && self.options == other.options
            && self.pointer_middle == other.pointer_middle
            && self.pointer_high == other.pointer_high
            && self.reserved == other.reserved
    }
}

/// A handler function for an interrupt or an exception without error code.
///
/// This type alias is only usable with the `abi_x86_interrupt` feature enabled.
#[cfg(feature = "abi_x86_interrupt")]
pub type HandlerFunc = extern "x86-interrupt" fn(InterruptStackFrame);
/// This type is not usable without the `abi_x86_interrupt` feature.
#[cfg(not(feature = "abi_x86_interrupt"))]
#[derive(Copy, Clone, Debug)]
pub struct HandlerFunc(());

/// A handler function for an exception that pushes an error code.
///
/// This type alias is only usable with the `abi_x86_interrupt` feature enabled.
#[cfg(feature = "abi_x86_interrupt")]
pub type HandlerFuncWithErrCode = extern "x86-interrupt" fn(InterruptStackFrame, error_code: u64);
/// This type is not usable without the `abi_x86_interrupt` feature.
#[cfg(not(feature = "abi_x86_interrupt"))]
#[derive(Copy, Clone, Debug)]
pub struct HandlerFuncWithErrCode(());

/// A page fault handler function that pushes a page fault error code.
///
/// This type alias is only usable with the `abi_x86_interrupt` feature enabled.
#[cfg(feature = "abi_x86_interrupt")]
pub type PageFaultHandlerFunc =
    extern "x86-interrupt" fn(InterruptStackFrame, error_code: PageFaultErrorCode);
/// This type is not usable without the `abi_x86_interrupt` feature.
#[cfg(not(feature = "abi_x86_interrupt"))]
#[derive(Copy, Clone, Debug)]
pub struct PageFaultHandlerFunc(());

/// A handler function that must not return, e.g. for a machine check exception.
///
/// This type alias is only usable with the `abi_x86_interrupt` feature enabled.
#[cfg(feature = "abi_x86_interrupt")]
pub type DivergingHandlerFunc = extern "x86-interrupt" fn(InterruptStackFrame) -> !;
/// This type is not usable without the `abi_x86_interrupt` feature.
#[cfg(not(feature = "abi_x86_interrupt"))]
#[derive(Copy, Clone, Debug)]
pub struct DivergingHandlerFunc(());

/// A handler function with an error code that must not return, e.g. for a double fault exception.
///
/// This type alias is only usable with the `abi_x86_interrupt` feature enabled.
#[cfg(feature = "abi_x86_interrupt")]
pub type DivergingHandlerFuncWithErrCode =
    extern "x86-interrupt" fn(InterruptStackFrame, error_code: u64) -> !;
/// This type is not usable without the `abi_x86_interrupt` feature.
#[cfg(not(feature = "abi_x86_interrupt"))]
#[derive(Copy, Clone, Debug)]
pub struct DivergingHandlerFuncWithErrCode(());

/// A general handler function for an interrupt or an exception with the interrupt/exceptions's index and an optional error code.
pub type GeneralHandlerFunc = fn(InterruptStackFrame, index: u8, error_code: Option<u64>);

impl<F> Entry<F> {
    /// Creates a non-present IDT entry (but sets the must-be-one bits).
    #[inline]
    pub const fn missing() -> Self {
        Entry {
            gdt_selector: 0,
            pointer_low: 0,
            pointer_middle: 0,
            pointer_high: 0,
            options: EntryOptions::minimal(),
            reserved: 0,
            phantom: PhantomData,
        }
    }

    /// Set the handler address for the IDT entry and sets the present bit.
    ///
    /// For the code selector field, this function uses the code segment selector currently
    /// active in the CPU.
    ///
    /// The function returns a mutable reference to the entry's options that allows
    /// further customization.
    ///
    /// # Safety
    ///
    /// The caller must ensure that `addr` is the address of a valid interrupt handler function,
    /// and the signature of such a function is correct for the entry type.
    #[cfg(feature = "instructions")]
    #[inline]
    pub unsafe fn set_handler_addr(&mut self, addr: VirtAddr) -> &mut EntryOptions {
        use crate::instructions::segmentation::{Segment, CS};

        let addr = addr.as_u64();

        self.pointer_low = addr as u16;
        self.pointer_middle = (addr >> 16) as u16;
        self.pointer_high = (addr >> 32) as u32;

        self.gdt_selector = CS::get_reg().0;

        self.options.set_present(true);
        &mut self.options
    }

    /// Returns the virtual address of this IDT entry's handler function.
    #[inline]
    pub fn handler_addr(&self) -> VirtAddr {
        let addr = self.pointer_low as u64
            | (self.pointer_middle as u64) << 16
            | (self.pointer_high as u64) << 32;
        // addr is a valid VirtAddr, as the pointer members are either all zero,
        // or have been set by set_handler_addr (which takes a VirtAddr).
        VirtAddr::new_truncate(addr)
    }
}

macro_rules! impl_set_handler_fn {
    ($h:ty) => {
        #[cfg(all(feature = "instructions", feature = "abi_x86_interrupt"))]
        impl Entry<$h> {
            /// Set the handler function for the IDT entry and sets the present bit.
            ///
            /// For the code selector field, this function uses the code segment selector currently
            /// active in the CPU.
            ///
            /// The function returns a mutable reference to the entry's options that allows
            /// further customization.
            ///
            /// This method is only usable with the `abi_x86_interrupt` feature enabled. Without it, the
            /// unsafe [`Entry::set_handler_addr`] method has to be used instead.
            #[inline]
            pub fn set_handler_fn(&mut self, handler: $h) -> &mut EntryOptions {
                let handler = VirtAddr::new(handler as u64);
                unsafe { self.set_handler_addr(handler) }
            }
        }
    };
}

impl_set_handler_fn!(HandlerFunc);
impl_set_handler_fn!(HandlerFuncWithErrCode);
impl_set_handler_fn!(PageFaultHandlerFunc);
impl_set_handler_fn!(DivergingHandlerFunc);
impl_set_handler_fn!(DivergingHandlerFuncWithErrCode);

/// Represents the options field of an IDT entry.
#[repr(transparent)]
#[derive(Clone, Copy, PartialEq)]
pub struct EntryOptions(u16);

impl fmt::Debug for EntryOptions {
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        f.debug_tuple("EntryOptions")
            .field(&format_args!("{:#06x}", self.0))
            .finish()
    }
}

impl EntryOptions {
    /// Creates a minimal options field with all the must-be-one bits set.
    #[inline]
    const fn minimal() -> Self {
        EntryOptions(0b1110_0000_0000)
    }

    /// Set or reset the preset bit.
    #[inline]
    pub fn set_present(&mut self, present: bool) -> &mut Self {
        self.0.set_bit(15, present);
        self
    }

    /// Let the CPU disable hardware interrupts when the handler is invoked. By default,
    /// interrupts are disabled on handler invocation.
    #[inline]
    pub fn disable_interrupts(&mut self, disable: bool) -> &mut Self {
        self.0.set_bit(8, !disable);
        self
    }

    /// Set the required privilege level (DPL) for invoking the handler. The DPL can be 0, 1, 2,
    /// or 3, the default is 0. If CPL < DPL, a general protection fault occurs.
    #[inline]
    pub fn set_privilege_level(&mut self, dpl: PrivilegeLevel) -> &mut Self {
        self.0.set_bits(13..15, dpl as u16);
        self
    }

    /// Assigns a Interrupt Stack Table (IST) stack to this handler. The CPU will then always
    /// switch to the specified stack before the handler is invoked. This allows kernels to
    /// recover from corrupt stack pointers (e.g., on kernel stack overflow).
    ///
    /// An IST stack is specified by an IST index between 0 and 6 (inclusive). Using the same
    /// stack for multiple interrupts can be dangerous when nested interrupts are possible.
    ///
    /// This function panics if the index is not in the range 0..7.
    ///
    /// ## Safety
    ///
    /// This function is unsafe because the caller must ensure that the passed stack index is
    /// valid and not used by other interrupts. Otherwise, memory safety violations are possible.
    #[inline]
    pub unsafe fn set_stack_index(&mut self, index: u16) -> &mut Self {
        // The hardware IST index starts at 1, but our software IST index
        // starts at 0. Therefore we need to add 1 here.
        self.0.set_bits(0..3, index + 1);
        self
    }
}

/// Wrapper type for the interrupt stack frame pushed by the CPU.
///
/// This type derefs to an [`InterruptStackFrameValue`], which allows reading the actual values.
///
/// This wrapper type ensures that no accidental modification of the interrupt stack frame
/// occurs, which can cause undefined behavior (see the [`as_mut`](InterruptStackFrame::as_mut)
/// method for more information).
#[repr(C)]
pub struct InterruptStackFrame {
    value: InterruptStackFrameValue,
}

impl InterruptStackFrame {
    /// Gives mutable access to the contents of the interrupt stack frame.
    ///
    /// The `Volatile` wrapper is used because LLVM optimizations remove non-volatile
    /// modifications of the interrupt stack frame.
    ///
    /// ## Safety
    ///
    /// This function is unsafe since modifying the content of the interrupt stack frame
    /// can easily lead to undefined behavior. For example, by writing an invalid value to
    /// the instruction pointer field, the CPU can jump to arbitrary code at the end of the
    /// interrupt.
    ///
    /// Also, it is not fully clear yet whether modifications of the interrupt stack frame are
    /// officially supported by LLVM's x86 interrupt calling convention.
    #[inline]
    pub unsafe fn as_mut(&mut self) -> Volatile<&mut InterruptStackFrameValue> {
        Volatile::new(&mut self.value)
    }
}

impl Deref for InterruptStackFrame {
    type Target = InterruptStackFrameValue;

    #[inline]
    fn deref(&self) -> &Self::Target {
        &self.value
    }
}

impl fmt::Debug for InterruptStackFrame {
    #[inline]
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        self.value.fmt(f)
    }
}

/// Represents the interrupt stack frame pushed by the CPU on interrupt or exception entry.
#[derive(Clone, Copy)]
#[repr(C)]
pub struct InterruptStackFrameValue {
    /// This value points to the instruction that should be executed when the interrupt
    /// handler returns. For most interrupts, this value points to the instruction immediately
    /// following the last executed instruction. However, for some exceptions (e.g., page faults),
    /// this value points to the faulting instruction, so that the instruction is restarted on
    /// return. See the documentation of the [`InterruptDescriptorTable`] fields for more details.
    pub instruction_pointer: VirtAddr,
    /// The code segment selector, padded with zeros.
    pub code_segment: u64,
    /// The flags register before the interrupt handler was invoked.
    pub cpu_flags: u64,
    /// The stack pointer at the time of the interrupt.
    pub stack_pointer: VirtAddr,
    /// The stack segment descriptor at the time of the interrupt (often zero in 64-bit mode).
    pub stack_segment: u64,
}

impl fmt::Debug for InterruptStackFrameValue {
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        struct Hex(u64);
        impl fmt::Debug for Hex {
            fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
                write!(f, "{:#x}", self.0)
            }
        }

        let mut s = f.debug_struct("InterruptStackFrame");
        s.field("instruction_pointer", &self.instruction_pointer);
        s.field("code_segment", &self.code_segment);
        s.field("cpu_flags", &Hex(self.cpu_flags));
        s.field("stack_pointer", &self.stack_pointer);
        s.field("stack_segment", &self.stack_segment);
        s.finish()
    }
}

bitflags! {
    /// Describes an page fault error code.
    ///
    /// This structure is defined by the following manual sections:
    ///   * AMD Volume 2: 8.4.2
    ///   * Intel Volume 3A: 4.7
    #[repr(transparent)]
    pub struct PageFaultErrorCode: u64 {
        /// If this flag is set, the page fault was caused by a page-protection violation,
        /// else the page fault was caused by a not-present page.
        const PROTECTION_VIOLATION = 1;

        /// If this flag is set, the memory access that caused the page fault was a write.
        /// Else the access that caused the page fault is a memory read. This bit does not
        /// necessarily indicate the cause of the page fault was a read or write violation.
        const CAUSED_BY_WRITE = 1 << 1;

        /// If this flag is set, an access in user mode (CPL=3) caused the page fault. Else
        /// an access in supervisor mode (CPL=0, 1, or 2) caused the page fault. This bit
        /// does not necessarily indicate the cause of the page fault was a privilege violation.
        const USER_MODE = 1 << 2;

        /// If this flag is set, the page fault is a result of the processor reading a 1 from
        /// a reserved field within a page-translation-table entry.
        const MALFORMED_TABLE = 1 << 3;

        /// If this flag is set, it indicates that the access that caused the page fault was an
        /// instruction fetch.
        const INSTRUCTION_FETCH = 1 << 4;

        /// If this flag is set, it indicates that the page fault was caused by a protection key.
        const PROTECTION_KEY = 1 << 5;

        /// If this flag is set, it indicates that the page fault was caused by a shadow stack
        /// access.
        const SHADOW_STACK = 1 << 6;

        /// If this flag is set, it indicates that the page fault was caused by SGX access-control
        /// requirements (Intel-only).
        const SGX = 1 << 15;

        /// If this flag is set, it indicates that the page fault is a result of the processor
        /// encountering an RMP violation (AMD-only).
        const RMP = 1 << 31;
    }
}

/// Describes an error code referencing a segment selector.
#[derive(Clone, Copy, PartialEq, Eq, Hash)]
#[repr(transparent)]
pub struct SelectorErrorCode {
    flags: u64,
}

impl SelectorErrorCode {
    /// Create a SelectorErrorCode. Returns None is any of the reserved bits (16-64) are set.
    pub const fn new(value: u64) -> Option<Self> {
        if value > u16::MAX as u64 {
            None
        } else {
            Some(Self { flags: value })
        }
    }

    /// Create a new SelectorErrorCode dropping any reserved bits (16-64).
    pub const fn new_truncate(value: u64) -> Self {
        Self {
            flags: (value as u16) as u64,
        }
    }

    /// If true, indicates that the exception occurred during delivery of an event
    /// external to the program, such as an interrupt or an earlier exception.
    pub fn external(&self) -> bool {
        self.flags.get_bit(0)
    }

    /// The descriptor table this error code refers to.
    pub fn descriptor_table(&self) -> DescriptorTable {
        match self.flags.get_bits(1..3) {
            0b00 => DescriptorTable::Gdt,
            0b01 => DescriptorTable::Idt,
            0b10 => DescriptorTable::Ldt,
            0b11 => DescriptorTable::Idt,
            _ => unreachable!(),
        }
    }

    /// The index of the selector which caused the error.
    pub fn index(&self) -> u64 {
        self.flags.get_bits(3..16)
    }

    /// If true, the #SS or #GP has returned zero as opposed to a SelectorErrorCode.
    pub fn is_null(&self) -> bool {
        self.flags == 0
    }
}

impl fmt::Debug for SelectorErrorCode {
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        let mut s = f.debug_struct("Selector Error");
        s.field("external", &self.external());
        s.field("descriptor table", &self.descriptor_table());
        s.field("index", &self.index());
        s.finish()
    }
}

/// The possible descriptor table values.
///
/// Used by the [`SelectorErrorCode`] to indicate which table caused the error.
#[derive(Debug, Clone, Copy, PartialEq, Eq, Hash)]
pub enum DescriptorTable {
    /// Global Descriptor Table.
    Gdt,
    /// Interrupt Descriptor Table.
    Idt,
    /// Logical Descriptor Table.
    Ldt,
}

/// This structure defines the CPU-internal exception vector numbers.
///
/// The values are defined by the following manual sections:
///   * AMD Volume 2: 8.2
///   * Intel Volume 3A: 6.3.1
#[repr(u8)]
#[non_exhaustive]
#[derive(Copy, Clone, Debug, PartialEq)]
pub enum ExceptionVector {
    /// Error during Division
    Division = 0x00,

    /// Debug
    Debug = 0x01,

    /// Non-Maskable Interrupt
    NonMaskableInterrupt = 0x02,

    /// Breakpoint
    Breakpoint = 0x03,

    /// Overflow
    Overflow = 0x04,

    /// Bound Range Exceeded
    BoundRange = 0x05,

    /// Invalid Opcode
    InvalidOpcode = 0x06,

    /// Device Not Available
    DeviceNotAvailable = 0x07,

    /// Double Fault
    Double = 0x08,

    /// Invalid TSS
    InvalidTss = 0x0A,

    /// Segment Not Present
    SegmentNotPresent = 0x0B,

    /// Stack Fault
    Stack = 0x0C,

    /// General Protection Fault
    GeneralProtection = 0x0D,

    /// Page Fault
    Page = 0x0E,

    /// x87 Floating-Point Exception
    X87FloatingPoint = 0x10,

    /// Alignment Check
    AlignmentCheck = 0x11,

    /// Machine Check
    MachineCheck = 0x12,

    /// SIMD Floating-Point Exception
    SimdFloatingPoint = 0x13,

    /// Virtualization Exception (Intel-only)
    Virtualization = 0x14,

    /// Control Protection Exception
    ControlProtection = 0x15,

    /// Hypervisor Injection (AMD-only)
    HypervisorInjection = 0x1C,

    /// VMM Communication (AMD-only)
    VmmCommunication = 0x1D,

    /// Security Exception
    Security = 0x1E,
}

#[cfg(all(feature = "instructions", feature = "abi_x86_interrupt"))]
#[macro_export]
/// Set a general handler in an [`InterruptDescriptorTable`].
/// ```
/// #![feature(abi_x86_interrupt)]
/// use x86_64::set_general_handler;
/// use x86_64::structures::idt::{InterruptDescriptorTable, InterruptStackFrame};
///
/// let mut idt = InterruptDescriptorTable::new();
/// fn my_general_handler(
///    stack_frame: InterruptStackFrame,
///    index: u8,
///    error_code: Option<u64>,
/// ) {
///     todo!("handle irq {}", index)
/// }
///
/// // set only one entry
/// # // there seems to be a bug in LLVM that causes rustc to crash on windows when compiling this test:
/// # // https://github.com/rust-osdev/x86_64/pull/285#issuecomment-962642984
/// # #[cfg(not(windows))]
/// set_general_handler!(&mut idt, my_general_handler, 14);
///
/// // set a range of entries
/// # // there seems to be a bug in LLVM that causes rustc to crash on windows when compiling this test:
/// # // https://github.com/rust-osdev/x86_64/pull/285#issuecomment-962642984
/// # #[cfg(not(windows))]
/// set_general_handler!(&mut idt, my_general_handler, 32..64);
///
/// // set all entries
/// # // there seems to be a bug in LLVM that causes rustc to crash on windows when compiling this test:
/// # // https://github.com/rust-osdev/x86_64/pull/285#issuecomment-962642984
/// # #[cfg(not(windows))]
/// set_general_handler!(&mut idt, my_general_handler);
/// ```
macro_rules! set_general_handler {
    ($idt:expr, $handler:ident) => {
        $crate::set_general_handler!($idt, $handler, 0..=255);
    };
    ($idt:expr, $handler:ident, $idx:literal) => {
        $crate::set_general_handler!($idt, $handler, $idx..=$idx);
    };
    ($idt:expr, $handler:ident, $range:expr) => {{
        /// This constant is used to avoid spamming the same compilation error ~200 times
        /// when the handler's signature is wrong.
        /// If we just passed `$handler` to `set_general_handler_recursive_bits`
        /// an error would be reported for every interrupt handler that tried to call it.
        /// With `GENERAL_HANDLER` the error is only reported once for this constant.
        const GENERAL_HANDLER: $crate::structures::idt::GeneralHandlerFunc = $handler;

        {
            fn set_general_handler(
                idt: &mut $crate::structures::idt::InterruptDescriptorTable,
                range: impl ::core::ops::RangeBounds<u8>,
            ) {
                $crate::set_general_handler_recursive_bits!(idt, GENERAL_HANDLER, range);
            }
            set_general_handler($idt, $range);
        }
    }};
}

#[cfg(all(feature = "instructions", feature = "abi_x86_interrupt"))]
#[macro_export]
#[doc(hidden)]
/// We can't loop in macros, but we can use recursion.
/// This macro recursivly adds one more bit to it's arguments until we have 8 bits so that we can call set_general_handler_entry.
macro_rules! set_general_handler_recursive_bits {
    // if we have 8 all bits, construct the index from the bits, check if the entry is in range and invoke the macro that sets the handler
    ($idt:expr, $handler:ident, $range:expr, $bit7:tt, $bit6:tt, $bit5:tt, $bit4:tt, $bit3:tt, $bit2:tt, $bit1:tt, $bit0:tt) => {{
        const IDX: u8 = $bit0 | ($bit1 << 1) | ($bit2 << 2) | ($bit3 << 3) | ($bit4 << 4) | ($bit5 << 5) | ($bit6 << 6) | ($bit7 << 7);

        #[allow(unreachable_code)]
        if $range.contains(&IDX) {
            $crate::set_general_handler_entry!($idt, $handler, IDX, $bit7, $bit6, $bit5, $bit4, $bit3, $bit2, $bit1, $bit0);
        }
    }};
    // otherwise recursivly invoke the macro adding one more bit
    ($idt:expr, $handler:ident, $range:expr $(, $bits:tt)*) => {
        $crate::set_general_handler_recursive_bits!($idt, $handler, $range $(, $bits)*, 0);
        $crate::set_general_handler_recursive_bits!($idt, $handler, $range $(, $bits)*, 1);
    };
}

#[cfg(all(feature = "instructions", feature = "abi_x86_interrupt"))]
#[macro_export]
#[doc(hidden)]
macro_rules! set_general_handler_entry {
    // special case entries that don't have the `HandlerFunc` signature
    ($idt:expr, $handler:ident, $idx:expr, 0, 0, 0, 0, 1, 0, 0, 0) => {{
        extern "x86-interrupt" fn handler(
            frame: $crate::structures::idt::InterruptStackFrame,
            error_code: u64,
        ) -> ! {
            $handler(frame, $idx.into(), Some(error_code));
            panic!("General handler returned on double fault");
        }
        $idt.double_fault.set_handler_fn(handler);
    }};
    ($idt:expr, $handler:ident, $idx:ident, 0, 0, 0, 0, 1, 0, 1, 0) => {{
        extern "x86-interrupt" fn handler(
            frame: $crate::structures::idt::InterruptStackFrame,
            error_code: u64,
        ) {
            $handler(frame, $idx.into(), Some(error_code));
        }
        $idt.invalid_tss.set_handler_fn(handler);
    }};
    ($idt:expr, $handler:ident, $idx:ident, 0, 0, 0, 0, 1, 0, 1, 1) => {{
        extern "x86-interrupt" fn handler(
            frame: $crate::structures::idt::InterruptStackFrame,
            error_code: u64,
        ) {
            $handler(frame, $idx.into(), Some(error_code));
        }
        $idt.segment_not_present.set_handler_fn(handler);
    }};
    ($idt:expr, $handler:ident, $idx:ident, 0, 0, 0, 0, 1, 1, 0, 0) => {{
        extern "x86-interrupt" fn handler(
            frame: $crate::structures::idt::InterruptStackFrame,
            error_code: u64,
        ) {
            $handler(frame, $idx.into(), Some(error_code));
        }
        $idt.stack_segment_fault.set_handler_fn(handler);
    }};
    ($idt:expr, $handler:ident, $idx:ident, 0, 0, 0, 0, 1, 1, 0, 1) => {{
        extern "x86-interrupt" fn handler(
            frame: $crate::structures::idt::InterruptStackFrame,
            error_code: u64,
        ) {
            $handler(frame, $idx.into(), Some(error_code));
        }
        $idt.general_protection_fault.set_handler_fn(handler);
    }};
    ($idt:expr, $handler:ident, $idx:ident, 0, 0, 0, 0, 1, 1, 1, 0) => {{
        extern "x86-interrupt" fn handler(
            frame: $crate::structures::idt::InterruptStackFrame,
            error_code: $crate::structures::idt::PageFaultErrorCode,
        ) {
            $handler(frame, IDX.into(), Some(error_code.bits()));
        }
        $idt.page_fault.set_handler_fn(handler);
    }};
    ($idt:expr, $handler:ident, $idx:ident, 0, 0, 0, 1, 0, 0, 0, 1) => {{
        extern "x86-interrupt" fn handler(
            frame: $crate::structures::idt::InterruptStackFrame,
            error_code: u64,
        ) {
            $handler(frame, $idx.into(), Some(error_code));
        }
        $idt.alignment_check.set_handler_fn(handler);
    }};
    ($idt:expr, $handler:ident, $idx:ident, 0, 0, 0, 1, 0, 0, 1, 0) => {{
        extern "x86-interrupt" fn handler(
            frame: $crate::structures::idt::InterruptStackFrame,
        ) -> ! {
            $handler(frame, $idx.into(), None);
            panic!("General handler returned on machine check exception");
        }
        $idt.machine_check.set_handler_fn(handler);
    }};
    ($idt:expr, $handler:ident, $idx:ident, 0, 0, 0, 1, 1, 1, 0, 1) => {
        extern "x86-interrupt" fn handler(
            frame: $crate::structures::idt::InterruptStackFrame,
            error_code: u64,
        ) {
            $handler(frame, $idx.into(), Some(error_code));
        }
        $idt.vmm_communication_exception.set_handler_fn(handler);
    };
    ($idt:expr, $handler:ident, $idx:ident, 0, 0, 0, 1, 1, 1, 1, 0) => {{
        extern "x86-interrupt" fn handler(
            frame: $crate::structures::idt::InterruptStackFrame,
            error_code: u64,
        ) {
            $handler(frame, $idx.into(), Some(error_code));
        }
        $idt.security_exception.set_handler_fn(handler);
    }};

    // reserved_1
    ($idt:expr, $handler:ident, $idx:ident, 0, 0, 0, 0, 1, 1, 1, 1) => {};
    // reserved_2
    ($idt:expr, $handler:ident, $idx:ident, 0, 0, 0, 1, 0, 1, 0, 1) => {};
    ($idt:expr, $handler:ident, $idx:ident, 0, 0, 0, 1, 0, 1, 1, 0) => {};
    ($idt:expr, $handler:ident, $idx:ident, 0, 0, 0, 1, 0, 1, 1, 1) => {};
    ($idt:expr, $handler:ident, $idx:ident, 0, 0, 0, 1, 1, 0, 0, 0) => {};
    ($idt:expr, $handler:ident, $idx:ident, 0, 0, 0, 1, 1, 0, 0, 1) => {};
    ($idt:expr, $handler:ident, $idx:ident, 0, 0, 0, 1, 1, 0, 1, 0) => {};
    ($idt:expr, $handler:ident, $idx:ident, 0, 0, 0, 1, 1, 0, 1, 1) => {};
    ($idt:expr, $handler:ident, $idx:ident, 0, 0, 0, 1, 1, 1, 0, 0) => {};
    // reserved_3
    ($idt:expr, $handler:ident, $idx:ident, 0, 0, 0, 1, 1, 1, 1, 1) => {};

    // set entries with `HandlerFunc` signature
    ($idt:expr, $handler:ident, $idx:ident $(, $_bits:tt)*) => {{
        extern "x86-interrupt" fn handler(frame: $crate::structures::idt::InterruptStackFrame) {
            $handler(frame, $idx.into(), None);
        }
        $idt[$idx as usize].set_handler_fn(handler);
    }};
}

#[cfg(test)]
mod test {
    use super::*;

    #[allow(dead_code)]
    fn entry_present(idt: &InterruptDescriptorTable, index: usize) -> bool {
        let options = match index {
            8 => &idt.double_fault.options,
            10 => &idt.invalid_tss.options,
            11 => &idt.segment_not_present.options,
            12 => &idt.stack_segment_fault.options,
            13 => &idt.general_protection_fault.options,
            14 => &idt.page_fault.options,
            15 => &idt.reserved_1.options,
            17 => &idt.alignment_check.options,
            18 => &idt.machine_check.options,
            i @ 21..=28 => &idt.reserved_2[i - 21].options,
            29 => &idt.vmm_communication_exception.options,
            30 => &idt.security_exception.options,
            31 => &idt.reserved_3.options,
            other => &idt[other].options,
        };
        options.0.get_bit(15)
    }

    #[test]
    fn size_test() {
        use core::mem::size_of;
        assert_eq!(size_of::<Entry<HandlerFunc>>(), 16);
        assert_eq!(size_of::<InterruptDescriptorTable>(), 256 * 16);
    }

    #[cfg(all(feature = "instructions", feature = "abi_x86_interrupt"))]
    // there seems to be a bug in LLVM that causes rustc to crash on windows when compiling this test:
    // https://github.com/rust-osdev/x86_64/pull/285#issuecomment-962642984
    #[cfg(not(windows))]
    #[test]
    fn default_handlers() {
        fn general_handler(
            _stack_frame: InterruptStackFrame,
            _index: u8,
            _error_code: Option<u64>,
        ) {
        }

        let mut idt = InterruptDescriptorTable::new();
        set_general_handler!(&mut idt, general_handler, 0);
        for i in 0..256 {
            if i == 0 {
                assert!(entry_present(&idt, i));
            } else {
                assert!(!entry_present(&idt, i));
            }
        }
        set_general_handler!(&mut idt, general_handler, 14);
        for i in 0..256 {
            if i == 0 || i == 14 {
                assert!(entry_present(&idt, i));
            } else {
                assert!(!entry_present(&idt, i));
            }
        }
        set_general_handler!(&mut idt, general_handler, 32..64);
        for i in 1..256 {
            if i == 0 || i == 14 || (32..64).contains(&i) {
                assert!(entry_present(&idt, i), "{}", i);
            } else {
                assert!(!entry_present(&idt, i));
            }
        }
        set_general_handler!(&mut idt, general_handler);
        for i in 0..256 {
            if i == 15 || i == 31 || (21..=28).contains(&i) {
                // reserved entries should not be set
                assert!(!entry_present(&idt, i));
            } else {
                assert!(entry_present(&idt, i));
            }
        }
    }

    #[test]
    fn entry_derive_test() {
        fn foo(_: impl Clone + Copy + PartialEq + fmt::Debug) {}

        foo(Entry::<HandlerFuncWithErrCode> {
            pointer_low: 0,
            gdt_selector: 0,
            options: EntryOptions(0),
            pointer_middle: 0,
            pointer_high: 0,
            reserved: 0,
            phantom: PhantomData,
        })
    }

    #[test]
    fn isr_frame_manipulation() {
        let mut frame = InterruptStackFrame {
            value: InterruptStackFrameValue {
                instruction_pointer: VirtAddr::new(0x1000),
                code_segment: 0,
                cpu_flags: 0,
                stack_pointer: VirtAddr::new(0x2000),
                stack_segment: 0,
            },
        };

        unsafe {
            frame
                .as_mut()
                .update(|f| f.instruction_pointer = f.instruction_pointer + 2u64);
        }
    }
}