Dockerfile

# based on armhf-gnu/Dockerfile
FROM ubuntu:22.04

ARG DEBIAN_FRONTEND=noninteractive
RUN apt-get update -y && apt-get install -y --no-install-recommends \
      bc \
      bzip2 \
      ca-certificates \
      cmake \
      cpio \
      curl \
      file \
      flex \
      bison \
      g++ \
      g++-riscv64-linux-gnu \
      git \
      libc6-dev \
      libc6-dev-riscv64-cross \
      libssl-dev \
      make \
      ninja-build \
      python3 \
      qemu-system-riscv64 \
      xz-utils

ENV ARCH=riscv \
    CROSS_COMPILE=riscv64-linux-gnu-

WORKDIR /build

# From https://github.com/michaeljclark/busybear-linux/blob/master/conf/linux.config
COPY host-x86_64/riscv64gc-gnu/linux.config /build

# Compile the kernel that we're going to be emulating with. This is
# basically just done to be compatible with the QEMU target that we're going
# to be using when running tests.
RUN curl https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.6.16.tar.xz | tar xJf - && \
    cp linux.config linux-5.6.16/.config && \
    cd /build/linux-5.6.16 && \
    make olddefconfig && \
    make -j$(nproc) vmlinux && \
    cp vmlinux /tmp && \
    rm -rf linux-5.6.16

# Compile an instance of busybox as this provides a lightweight system and init
# binary which we will boot into. Only trick here is configuring busybox to
# build static binaries.
RUN curl https://www.busybox.net/downloads/busybox-1.32.1.tar.bz2 | tar xjf - && \
      cd busybox-1.32.1 && \
      make defconfig && \
      sed -i 's/.*CONFIG_STATIC.*/CONFIG_STATIC=y/' .config && \
      make -j$(nproc) && \
      make install && \
      mv _install /tmp/rootfs && \
      cd /build && \
      rm -rf busybox-1.32.1

# Download the ubuntu rootfs, which we'll use as a chroot for all our tests.
WORKDIR /tmp
RUN mkdir rootfs/ubuntu
RUN curl https://cdimage.ubuntu.com/ubuntu-base/releases/22.04/release/ubuntu-base-22.04.2-base-riscv64.tar.gz | \
      tar xzf - -C rootfs/ubuntu && \
      cd rootfs && mkdir proc sys dev etc etc/init.d

# Copy over our init script, which starts up our test server and also a few other
# misc tasks
COPY scripts/qemu-bare-bones-rcS rootfs/etc/init.d/rcS
RUN chmod +x rootfs/etc/init.d/rcS

# Helper to quickly fill the entropy pool in the kernel
COPY scripts/qemu-bare-bones-addentropy.c /tmp/addentropy.c
RUN riscv64-linux-gnu-gcc addentropy.c -o rootfs/addentropy -static

# download and build the riscv bootloader
RUN git clone https://github.com/riscv/riscv-pk
WORKDIR /tmp/riscv-pk
# This revision fixes a fault in recent QEMU from 64-bit accesses to the PLIC
# commits later than this one should work too
RUN git checkout 7d8b7c0dab72108e3ea7bb7744d3f6cc907c7ef4
RUN mkdir build && cd build && \
    ../configure --with-payload=/tmp/vmlinux --host=riscv64-linux-gnu && \
    make -j$(nproc) && \
    cp bbl /tmp
WORKDIR /tmp
RUN rm -rf /tmp/riscv-pk

COPY scripts/sccache.sh /scripts/
RUN sh /scripts/sccache.sh

# Avoid "fatal: detected dubious ownership in repository at '/checkout'" error
RUN git config --global --add safe.directory /checkout

ENV RUST_CONFIGURE_ARGS \
    --qemu-riscv64-rootfs=/tmp/rootfs \
    --set target.riscv64gc-unknown-linux-gnu.linker=riscv64-linux-gnu-gcc
ENV SCRIPT python3 ../x.py --stage 2 test --host='' --target riscv64gc-unknown-linux-gnu

ENV NO_CHANGE_USER=1