Skip to content

Latest commit

 

History

History
50 lines (37 loc) · 3.44 KB

README.md

File metadata and controls

50 lines (37 loc) · 3.44 KB
Raw

Firmware Configurations

Firmware Configurations for Voron 3D printers, separated by firmware. Remember to update this README when uploading new firmware configurations!

Legacy printers

Configurations for legacy printers can be found here. If one of your configurations applies to a current generation Voron printer, contact the admins in Discord to have your mod moved to this folder.

Table structure

Update the following table with the information about your mod:

  • Your name
  • A link to your sub-folder
  • A short description of your firmware config
  • The printer compatibility. Use :heavy_check_mark: for ✔️,:x: for ❌ and :grey_question: for ❔

like so: | Creator | [Config Title](link) | Description | :x: | :x: | :x: | :x: |

Klipper

Creator Config title Description V0 V1.8 V2.4 VSW VT
clee Fysetc S6 V2.1 for V0.1 Example configuration and board pin aliases for the Fysetc S6 V2.1 for V0.1 ✔️ ❌ ❌ ❌ ❌
Makerbase Eagle V1.0/Robin Nano V3.1 Example configuration and board pin aliases for the MKS Eagle/Robin Nano V3.1 for V0.1 ✔️ ❌ ❌ ❌ ❌
jaeger FYSETC Spider on V1.8 Example configuration and wiring diagram for a FYSETC Spider 1.1 board on the V1.8 ❌ ✔️ ❌ ❌ ❌
MarcPot Fysetc Spider Board Pins Defines a set of [board_pins] aliases for use with the Fysetc Spider controller ✔️ ✔️ ✔️ ✔️ ❌
Mellow Fly-Super8 on V2.4 Example configuration and wiring diagram for a FLY-Super8 board on the V2.4 ❌ ❌ ✔️ ❌ ❌
Mellow Fly-Gemini on v0 Sample configuration and wiring diagram of Fly-Gemini Linux integrated motherboard in v0 and v0.1 ✔️ ❌ ❌ ❌ ❌
revnull BTT Octopus Board Pins Defines a set of [board_pins] aliases for use with the BTT Octopus controller ❔ ❔ ✔️ ❔ ❌
RealDeuce MKS Makerbase Monster8 v1.0_003 Configuration and instructions for installing an MKS Makerbase Monster8 board ❌ ❌ ✔️ ❌ ❌
TechnoPhreak BTT SKR v2 for V2.4 Example configuration, wiring diagram and special instructions for the BTT SKR v2 controllers ❔ ❔ ✔️ ❔
redelman Fysetc Spider 2.2 for Voron Trident Example configuration and special instructions for the Fysetc Spider 2.2 for VT ❌ ❌ ❌ ❌ ✔️

RepRapFirmware

Creator Config title Description V0 V1.8 V2.4 VSW
DorjeDorf Duet 3 Config RRF 3.3 example config ❌ ❌ ✔️ ❌
fulg Duet 2 Config RRF 2.05 example config ❌ ❌ ✔️ ❌