Welcome to the FELTOR project!

(Visit our project Homepage for documentations, user-guides, examples and more)

FELTOR (Full-F ELectromagnetic code in TORoidal geometry) is both a numerical library and a scientific software package built on top of it.

Its main physical target are plasma edge and scrape-off layer (gyro-)fluid simulations. The numerical methods centre around discontinuous Galerkin methods on structured grids. Our core level functions are parallelized for a variety of hardware from multi-core cpu to hybrid MPI+GPU, which makes the library incredibly fast. Note that the library ships with a multitude of test and benchmark programs.

Table of Contents

1. Quick start guide
2. Documentation
3. Authors, Acknowledgements, Contributions
License

1. Quick start guide

This guide discusses how to setup, test and benchmark the FELTOR library installation. Please read it before you proceed to the user guide to learn how to use the library in your own programs. We also present how to use the FELTOR software package, which requires additional external libraries to be installed on the system.

If you run into trouble during the setup, there is a chance that we already know of the problem and have an entry in troubleshooting page. If you cannot find a solution there, please inform us of the issue.

The first part assumes a Linux operating system. If you want to work on Windows, jump to Using Feltor on Windows.

System setup

Open a terminal and clone the repository into any folder you like

git clone https://www.github.com/feltor-dev/feltor

You also need to clone thrust and cusp distributed under the Apache-2.0 license. Also, we need Agner Fog’s vcl library (Apache 2.0). So again in a folder of your choice

git clone https://www.github.com/nvidia/thrust
git clone https://www.github.com/cusplibrary/cusplibrary
git clone https://www.github.com/vectorclass/version1 vcl
# We need to checkout an older version of thrust compatible with cusp
cd thrust
git checkout 1.9.3

Our code only depends on external libraries that are themselves openly available. We use version1 of the vectorclass library, as version2 requires C++-17 and does not work with the intel compiler.

Table 1. System requirements

	Minimum system requirements	Recommended system requirements
CPU	Any	support for AVX and FMA instruction set
Compiler	gcc-5.1 or msvc-15 or icc-17.0 (C++-14 standard)	gcc-9.3, OpenMP-4 support, avx, fma instruction set flags
GPU	-	NVidia GPU with compute-capability > 6 and nvcc-11.0
MPI	-	mpi installation compatible with compiler (ideally cuda-aware in case hybrid MPI+GPU is the target system)

Our GPU backend uses the Nvidia-CUDA programming environment and in order to compile and run a program for a GPU a user needs at least the nvcc-8.0 compiler (available free of charge) and a NVidia GPU. However, we explicitly note here that due to the modular design of our software a user does not have to possess a GPU nor the nvcc compiler. The CPU version of the backend is equally valid and provides the same functionality. Analogously, an MPI installation is only required if the user targets a distributed memory system.

Running a FELTOR test or benchmark program

In order to compile one of the many test and benchmark codes inside the FELTOR library you need to tell the FELTOR configuration where the external libraries are located on your computer. The default way to do this is to go into your HOME directory, make an include directory and link the paths in this directory

cd ~
mkdir include
cd include
ln -s path/to/thrust/thrust # Yes, thrust is there twice!
ln -s path/to/cusplibrary/cusp
ln -s path/to/vcl

If you do not like this, you can also set the include paths in your own config file as described here.

Now let us compile the first benchmark program.

cd path/to/feltor/inc/dg

make blas_b device=cpu #(for a single thread CPU version)
#or
make blas_b device=omp #(for an OpenMP version)
#or
make blas_b device=gpu #(if you have a GPU and nvcc )

Run the code with

./blas_b

and when prompted for input vector sizes type for example 3 100 100 10 which makes a grid with 3 polynomial coefficients, 100 cells in x, 100 cells in y and 10 in z. If you compiled for OpenMP, you can set the number of threads with e.g. export OMP_NUM_THREADS=4.

This is a benchmark program to benchmark various elemental functions the library is built on. Go ahead and vary the input parameters and see how your hardware performs. You can compile and run any other program that ends in _t.cu (test programs) or _b.cu (benchmark programs) in feltor/inc/dg in this way.

Now, let us test the mpi setup

You can of course skip this if you don’t have mpi installed on your computer. If you intend to use the MPI backend, an implementation library of the mpi standard is required. Per default mpic++ is used for compilation.

cd path/to/feltor/inc/dg

make blas_mpib device=cpu  # (for MPI+CPU)
# or
make blas_mpib device=omp  # (for MPI+OpenMP)
# or
make blas_mpib device=gpu # (for MPI+GPU, requires CUDA-aware MPI installation)

Run the code with $ mpirun -n '# of procs' ./blas_mpib then tell how many process you want to use in the x-, y- and z- direction, for example: 2 2 1 (i.e. 2 procs in x, 2 procs in y and 1 in z; total number of procs is 4) when prompted for input vector sizes type for example 3 100 100 10 (number of cells divided by number of procs must be an integer number). If you compiled for MPI+OpenMP, you can set the number of OpenMP threads with e.g. export OMP_NUM_THREADS=2.

Running a FELTOR simulation

Now, we want to compile and run a simulation program. To this end, we have to download and install some additional libraries for I/O-operations.

First, we need to install jsoncpp (distributed under the MIT License), which on linux is available as libjsoncpp-dev through the package managment system. For a manual build check the instructions on JsonCpp.

# You may have to manually link the include path
cd ~/include
ln -s /usr/include/jsoncpp/json

For data output we use the NetCDF-C library under an MIT - like license (we use the netcdf-4 file format). The underlying HDF5 library also uses a very permissive license. Both can be installed easily on Linux through the libnetcdf-dev and libhdf5-dev packages. For a manual build follow the build instructions in the netcdf-documentation. Note that by default we use the serial netcdf and hdf5 libraries alson in the mpi versions of applications.

Some desktop applications in FELTOR use the draw library (developed by us also under MIT), which depends on glfw3, an OpenGL development library under a BSD-like license. There is a libglfw3-dev package for convenient installation. Again, link path/to/draw in the include folder.

If you are on a HPC cluster, you may need to set INCLUDE and LIB variables manually. For details on how FELTOR’s Makefiles are configured please see the config file. There are also examples of some existing Makefiles in the same folder.

We are now ready to compile and run a simulation program

cd path/to/feltor/src/toefl # or any other project in the src folder

make toefl device=gpu     # (compile for gpu, cpu or omp)
cp input/default.json inputfile.json # create an inputfile
./toefl inputfile.json    # (behold a live simulation with glfw output on screen)
# or
make toefl_hpc device=gpu  # (compile for gpu, cpu or omp)
cp input/default_hpc.json inputfile_hpc.json # create an inputfile
./toefl_hpc inputfile_hpc.json outputfile.nc # (a single node simulation with output stored in a file)
# or
make toefl_mpi device=omp  # (compile for gpu, cpu or omp)
export OMP_NUM_THREADS=2   # (set OpenMP thread number to 1 for pure MPI)
echo 2 2 | mpirun -n 4 ./toefl_mpi inputfile_hpc.json outputfile.nc
# (a multi node simulation with now in total 8 threads with output stored in a file)
# The mpi program will wait for you to type the number of processes in x and y direction before
# running. That is why the echo is there.

Default input files are located in path/to/feltor/src/toefl/input. All three programs solve the same equations. The technical documentation on what equations are discretized, input/output parameters, etc. can be generated as a pdf with make doc in the path/to/feltor/src/toefl directory.

Using FELTOR as a library

FELTOR’s library is the dg-library (from discontinuous Galerkin). Note that the library is header-only, which means that you just have to include the relevant header(s) and you’re good to go. For example in the following program we compute the square L2 norm of a function:

test.cpp

#include <iostream>
//include the basic dg-library
#include "dg/algorithm.h"

double function(double x, double y){return exp(x)*exp(y);}
int main()
{
    //create a 2d discretization of [0,2]x[0,2] with 3 polynomial coefficients
    dg::CartesianGrid2d g2d( 0, 2, 0, 2, 3, 20, 20);
    //discretize a function on this grid
    const dg::DVec x = dg::evaluate( function, g2d);
    //create the volume element
    const dg::DVec vol2d = dg::create::volume( g2d);
    //compute the square L2 norm on the device
    double norm = dg::blas2::dot( x, vol2d, x);
    // norm is now: (exp(4)-exp(0))^2/4
    std::cout << norm <<std::endl;
    return 0;
}

To compile and run this code for a GPU use (assuming the external libraries are linked in the include folder as described above)

nvcc -x cu -std=c++14 --extended-lambda -Ipath/to/feltor/inc -Ipath/to/include test.cpp -o test
./test

Or if you want to use OpenMP and gcc instead of CUDA for the device functions you can also use

g++ -std=c++14 -fopenmp -mavx -mfma -DTHRUST_DEVICE_SYSTEM=THRUST_DEVICE_SYSTEM_OMP -Ipath/to/feltor/inc -Ipath/to/include test.cpp -o test
export OMP_NUM_THREADS=4
./test

If you do not want any parallelization, you can use a single thread version

g++ -std=c++14 -mavx -mfma -DTHRUST_DEVICE_SYSTEM=THRUST_DEVICE_SYSTEM_CPP -Ipath/to/feltor/inc -Ipath/to/include test.cpp -o test
./test

If you want to use mpi, just include the MPI header before any other FELTOR header and use our convenient typedefs like so:

test_mpi.cpp

#include <iostream>
//activate MPI in FELTOR
#include "mpi.h"
#include "dg/algorithm.h"

double function(double x, double y){return exp(x)*exp(y);}
int main(int argc, char* argv[])
{
    //init MPI and create a 2d Cartesian Communicator assuming 4 MPI threads
    MPI_Init( &argc, &argv);
    int periods[2] = {true, true}, np[2] = {2,2};
    MPI_Comm comm;
    MPI_Cart_create( MPI_COMM_WORLD, 2, np, periods, true, &comm);
    //create a 2d discretization of [0,2]x[0,2] with 3 polynomial coefficients
    dg::CartesianMPIGrid2d g2d( 0, 2, 0, 2, 3, 20, 20, comm);
    //discretize a function on this grid
    const dg::MDVec x = dg::evaluate( function, g2d);
    //create the volume element
    const dg::MDVec vol2d = dg::create::volume( g2d);
    //compute the square L2 norm
    double norm = dg::blas2::dot( x, vol2d, x);
    //on every thread norm is now: (exp(4)-exp(0))^2/4
    //be a good MPI citizen and clean up
    MPI_Finalize();
    return 0;
}

Compile e.g. for a hybrid MPI + OpenMP hardware platform with

mpic++ -std=c++14 -mavx -mfma -fopenmp -DTHRUST_DEVICE_SYSTEM=THRUST_DEVICE_SYSTEM_OMP -Ipath/to/feltor/inc -Ipath/to/include test_mpi.cpp -o test_mpi
export OMP_NUM_THREADS=2
mpirun -n 4 ./test_mpi

Note the striking similarity to the previous program. Especially the line calling the dot function did not change at all. The compiler chooses the correct implementation for you! This is a first example of a container free numerical algorithm.

Using FELTOR’s Makefile system

In order to simplify compilation in your own project we suggest to use Makefile and import the feltor configuration like so:

device=omp # default device
FELTOR_PATH=path/to/feltor

# use Feltor's configuration
include $(FELTOR_PATH)/config/default.mk
include $(FELTOR_PATH)/config/*.mk
include $(FELTOR_PATH)/config/devices/devices.mk

INCLUDE+=-I$(FELTOR_PATH)/inc/

# See feltor/config/README for a list of all defined variables
# For example here the feltor/src/toefl project is set up
# The toefl.cpp program can be compiled in three different ways
# and each can be compiled for various device values e.g.
# make toefl device=gpu

all: toefl toefl_hpc toefl_mpi

# shared memory version using glfw, jsoncpp and netcdf
toefl: toefl.cpp toefl.h parameters.h diag.h
    $(CC) $(OPT) $(CFLAGS) $< -o $@ $(INCLUDE) $(GLFLAGS) $(LIBS) $(JSONLIB) -DWITH_GLFW -g

# shared memory version using jsoncpp and netcdf without glfw
toefl_hpc: toefl.cpp toefl.h parameters.h diag.h
    $(CC) $(OPT) $(CFLAGS) $< -o $@ $(INCLUDE) $(LIBS) $(JSONLIB) -g

# mpi version using jsoncpp and netcdf without glfw
toefl_mpi: toefl.cpp toefl.h parameters.h diag.h
    $(MPICC) $(OPT) $(MPICFLAGS) $< -o $@ $(INCLUDE) $(LIBS) $(JSONLIB)

.PHONY: clean

clean:
    rm -f toefl toefl_hpc toefl_mpi

Using FELTOR on Windows

FELTOR has been developed mostly on Linux machines. Recently, it has become possible to develop also on Windows using Microsoft Visual Studio. We here describe how to work with FELTOR’s OpenMP shared memory backend on Windows.

Unfortunately, the msvc compiler only supports an outdated OpenMP version so consider a performance penalty of approximately a factor 2, when running the OpenMP backend on Windows.

Basic Setup

We suggest to install the Github desktop https://desktop.github.com. Please clone all four of the following URLs using File → Clone repository…

https://www.github.com/feltor-dev/feltor
https://www.github.com/nvidia/thrust
# Checkout thrust to 1.9.3
https://www.github.com/cusplibrary/cusplibrary
https://www.github.com/vectorclass/version1 # local path "vcl"

Please also have a look at the relevant system requirements Table.

Creating a basic FELTOR Property Sheet

In Visual Studio we suggest to create a Property Sheet for FELTOR. The Property Sheet can then be conveniently added to any project that includes the FELTOR library headers dg/algorithm.h and/or dg/geometries/geometries.h

Open an existing solution in Visual Studio or create a new project with File → New → Projet … selecting Empty Project in Visual C++.
In the Solution Explorer change to the Property Manager tab (you may have to google how to activate it if it is not there), then click on Add New Project Property Sheet, name it FeltorPropertySheet.props and save it to a convenient location.
Double click on FeltorPropertySheet (expand your solution and any of the Debug or Release tabs to find it)
- In VC++ Directories → Include Directories click on Edit Then add the four lines path\to\feltor\inc, path\to\thrust, path\to\cusplibrary and path\to\folder_containing_vcl
- In C/C++ → Optimization → Enable Intrinsic Functions select Yes (/Oi)
- In C/C++ → Preprocessor → Preprocessor Definitions select Edit and add the line THRUST_DEVICE_SYSTEM=THRUST_DEVICE_SYSTEM_CPP (Selects the CPU backend in FELTOR)
- In C/C++ → Code Generation → Enable Enhanced Instruction Set select Advanced Vector Extensions 2 (/arch:AVX2) (If your CPU supports it, of course)
Don’t forget to click Apply in the end.

That’s it. You can add your Feltor Property Sheet to any new project by switching to the Property Manager again: click Add Existing Property Sheet and select FeltorPropertySheet.

We suggest that you generate a new project for each executable program.

Basic test

In order to test the Feltor Property Sheet let us add a source file to the project and compile

In the Solution Explorer right click on Source Files → Add → New Item … → C++ File (.cpp). As an example we name it test.cpp and copy the contents of test.cpp
Change the Platform from x86 to x64.
Compile with Ctrl + F5 then run the code

If you want to prevent the console from closing on program exit, set Properties → Linker → System → SubSystem → Console (/SUBSYSTEM:CONSOLE) in your Property Sheet.

Advanced simulation projects

Our simulation codes typically depend on jsoncpp for parameter input, glfw3 for plotting or netcdf-4 for file output and come with a LaTeX file containing documentation. You will need to download these additional libraries and adapt the project properties accordingly.

jsoncpp

Download and Install Anaconda. (to get a working python3 installation)
In Github desktop: File → Clone repository… clone https://github.com/open-source-parsers/jsoncpp
Execute the file path\to\jsconcpp\amalgamate.py. The only way to confirm its success is to look for a dist folder containing jsconcpp.cpp and a folder containing two header files.
Add path\to\jsoncpp\dist to Properties → VC++ Directories → Include Directories
In the Solution Explorer Right click Source Files → Add → Existing Item and select path\to\jsconcpp\dist\jsoncpp.cpp

Glfw3

In Github desktop: File → Clone repository… clone https://github.com/feltor-dev/draw
Download and extract the Windows binaries from https://www.glfw.org/download.html
Add path\to\glfw-3\include and path\to\folder_containing_draw to Properties → VC++ Directories → Include Directories
In Properties → Linker → General → Additional Library Directories add path\to\glfw-3\lib-vc2015
Finally, in Properties → Linker → Input → Additional Dependencies add the lines glfw3.lib and opengl32.lib (there needs to be a newline in between!)

NetCDF

Download and install the NetCDF-4.x.x-NC4-64.exe package from https://www.unidata.ucar.edu/downloads/netcdf/index.jsp (make sure to Check "Add netCDF to system PATH" during the installation process)
Add path\to\netCDF\include to Properties → VC++ Directories → Include Directories
In Properties → Linker → General → Additional Library Directories add path\to\netCDF\lib
Finally, in Properties → Linker → Input → Additional Dependencies add the line netcdf.lib

LaTeX

Install MikTex and TeXstudio (in that order) in order to be able to compile the tex file(s) of the documentation.

Troubleshooting

I get a compile error: identifier "__thrust_compiler_fence" is undefined

This is an error of the unmaintained cusp that does not like the newly updated thrust version on github. Currently, you can either go back to version 1.9.3 in thrust:

cd path/to/thrust
git checkout 1.9.3

or alternatively there is a fix in cusp that can be accessed via

cd path/to/cusplibrary
git checkout cuda10

2. Documentation

The documentation of the dg library was generated with Doxygen and LateX. You can generate a local version directly from source code. This depends on the doxygen, libjs-mathjax and graphviz packages and LateX (for equations). Type make doc in the folder path/to/feltor/doc and open index.html (a symbolic link to dg/html/modules.html) with your favorite browser. Finally, also note the documentations of thrust and cusp.

We maintain tex files in every src folder for technical documentation, which can be compiled using pdflatex with make doc in the respective src folder.

3. Authors, Acknowledgements, Contributions

FELTOR has been developed by Matthias Wiesenberger and Markus Held. Please see the Acknowledgements section on our homepage for a full list of contributors and funding. Contribution guidelines can be found in the CONTRIBUTING file.

License

This project is licensed under the MIT license - see LICENSE for details.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.adoc

README.adoc

Welcome to the FELTOR project!

1. Quick start guide

System setup

Running a FELTOR test or benchmark program

Running a FELTOR simulation

Using FELTOR as a library

Using FELTOR’s Makefile system

Using FELTOR on Windows

Basic Setup

Creating a basic FELTOR Property Sheet

Basic test

Advanced simulation projects

Troubleshooting

I get a compile error: identifier "__thrust_compiler_fence" is undefined

2. Documentation

3. Authors, Acknowledgements, Contributions

License

Files

README.adoc

Latest commit

History

README.adoc

File metadata and controls

Welcome to the FELTOR project!

1. Quick start guide

System setup

Running a FELTOR test or benchmark program

Running a FELTOR simulation

Using FELTOR as a library

Using FELTOR’s Makefile system

Using FELTOR on Windows

Basic Setup

Creating a basic FELTOR Property Sheet

Basic test

Advanced simulation projects

Troubleshooting

I get a compile error: identifier "__thrust_compiler_fence" is undefined

2. Documentation

3. Authors, Acknowledgements, Contributions

License