pi@raspberrypi:~ $ dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.32-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1413 SMP Tue Apr 27 14:43:13 BST 2021 [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.2 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x000000001bc00000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002befffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x000000002bf00000-0x00000000fbffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000002befffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff] [ 0.000000] On node 0 totalpages: 950016 [ 0.000000] DMA zone: 2109 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 179968 pages, LIFO batch:63 [ 0.000000] HighMem zone: 770048 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 20 pages/cpu s50764 r8192 d22964 u81920 [ 0.000000] pcpu-alloc: s50764 r8192 d22964 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 947907 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1600x900M@60 video=HDMI-A-2:1600x900M@60 smsc95xx.macaddr=DC:A6:32:5A:80:BD vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 usb-storage.quirks=152d:0578:u console=ttyS0,115200 console=tty1 root=PARTUUID=1e601bc1-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait splash plymouth.ignore-serial-consoles sdhci.debug_quirks2=4 quiet [ 0.000000] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000014cc0000-0x0000000018cc0000] (64MB) [ 0.000000] Memory: 3406976K/3800064K available (10240K kernel code, 1364K rwdata, 3188K rodata, 2048K init, 891K bss, 130944K reserved, 262144K cma-reserved, 3080192K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 34278 entries in 67 pages [ 0.000000] ftrace: allocated 67 pages with 3 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x3c8/0x598 with crng_init=0 [ 0.000007] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000026] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000088] bcm2835: system timer (irq = 25) [ 0.000739] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000756] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000775] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000789] Switching to timer-based delay loop, resolution 18ns [ 0.001053] Console: colour dummy device 80x30 [ 0.001124] printk: console [tty1] enabled [ 0.001180] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [ 0.001213] pid_max: default: 32768 minimum: 301 [ 0.001384] LSM: Security Framework initializing [ 0.001572] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001599] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003203] Disabling memory control group subsystem [ 0.003323] CPU: Testing write buffer coherency: ok [ 0.003790] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005006] Setting up static identity map for 0x200000 - 0x20003c [ 0.005206] rcu: Hierarchical SRCU implementation. [ 0.006146] smp: Bringing up secondary CPUs ... [ 0.007352] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.008737] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.010057] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.010230] smp: Brought up 1 node, 4 CPUs [ 0.010252] SMP: Total of 4 processors activated (432.00 BogoMIPS). [ 0.010267] CPU: All CPU(s) started in HYP mode. [ 0.010281] CPU: Virtualization extensions available. [ 0.011217] devtmpfs: initialized [ 0.025839] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [ 0.026078] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.026110] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.033216] pinctrl core: initialized pinctrl subsystem [ 0.034334] NET: Registered protocol family 16 [ 0.038610] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.039378] audit: initializing netlink subsys (disabled) [ 0.039635] audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1 [ 0.040199] thermal_sys: Registered thermal governor 'step_wise' [ 0.041137] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.041155] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.041578] Serial: AMBA PL011 UART driver [ 0.073846] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.090869] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-04-21T15:47:51, variant start [ 0.100880] raspberrypi-firmware soc:firmware: Firmware hash is a48d332c35ee1c1c1ab433228e23317f62dcc5fb [ 0.141496] Kprobes globally optimized [ 0.146763] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.151272] vgaarb: loaded [ 0.151739] SCSI subsystem initialized [ 0.151980] usbcore: registered new interface driver usbfs [ 0.152041] usbcore: registered new interface driver hub [ 0.152114] usbcore: registered new device driver usb [ 0.152463] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 0.154602] clocksource: Switched to clocksource arch_sys_counter [ 1.113886] VFS: Disk quotas dquot_6.6.0 [ 1.113987] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.114166] FS-Cache: Loaded [ 1.114385] CacheFiles: Loaded [ 1.115584] simple-framebuffer 3e530000.framebuffer: framebuffer at 0x3e530000, 0x591000 bytes, mapped to 0x(ptrval) [ 1.115607] simple-framebuffer 3e530000.framebuffer: format=a8r8g8b8, mode=1600x900x32, linelength=6400 [ 1.116085] Console: switching to colour frame buffer device 200x56 [ 1.123281] simple-framebuffer 3e530000.framebuffer: fb0: simplefb registered! [ 1.133714] NET: Registered protocol family 2 [ 1.134572] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.134662] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.134815] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.134887] TCP: Hash tables configured (established 8192 bind 8192) [ 1.135055] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.135092] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.135366] NET: Registered protocol family 1 [ 1.136099] RPC: Registered named UNIX socket transport module. [ 1.136116] RPC: Registered udp transport module. [ 1.136131] RPC: Registered tcp transport module. [ 1.136146] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.136172] PCI: CLS 0 bytes, default 64 [ 1.139342] Initialise system trusted keyrings [ 1.139634] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [ 1.148276] zbud: loaded [ 1.150515] FS-Cache: Netfs 'nfs' registered for caching [ 1.151298] NFS: Registering the id_resolver key type [ 1.151334] Key type id_resolver registered [ 1.151350] Key type id_legacy registered [ 1.151491] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.151507] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.152575] Key type asymmetric registered [ 1.152591] Asymmetric key parser 'x509' registered [ 1.152786] bounce: pool size: 64 pages [ 1.152830] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.153044] io scheduler mq-deadline registered [ 1.153061] io scheduler kyber registered [ 1.157679] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 1.157711] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 1.157791] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [ 1.157880] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000 [ 1.216710] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 1.217112] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 1.217133] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.217155] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [ 1.217249] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 1.217495] pci 0000:00:00.0: PME# supported from D0 D3hot [ 1.221015] PCI: bus0: Fast back to back transfers disabled [ 1.221366] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 1.221494] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 1.221930] pci 0000:01:00.0: PME# supported from D0 D3cold [ 1.225449] PCI: bus1: Fast back to back transfers disabled [ 1.225515] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 1.225540] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 1.225624] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.225651] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 1.226061] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [ 1.226278] pcieport 0000:00:00.0: PME: Signaling with IRQ 62 [ 1.235035] iproc-rng200 fe104000.rng: hwrng registered [ 1.235352] vc-mem: phys_addr:0x00000000 mem_base=0x3eb00000 mem_size:0x3ff00000(1023 MiB) [ 1.236235] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 1.248601] brd: module loaded [ 1.260990] loop: module loaded [ 1.262681] Loading iSCSI transport class v2.0-870. [ 1.265999] libphy: Fixed MDIO Bus: probed [ 1.267716] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 1.284651] libphy: bcmgenet MII bus: probed [ 1.364770] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 1.365950] usbcore: registered new interface driver r8152 [ 1.366020] usbcore: registered new interface driver lan78xx [ 1.366086] usbcore: registered new interface driver smsc95xx [ 1.367742] xhci_hcd 0000:01:00.0: enabling device (0140 -> 0142) [ 1.367907] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.367944] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 1.371358] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000060000000890 [ 1.372710] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.372729] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.372745] usb usb1: Product: xHCI Host Controller [ 1.372762] usb usb1: Manufacturer: Linux 5.10.32-v7l+ xhci-hcd [ 1.372778] usb usb1: SerialNumber: 0000:01:00.0 [ 1.373511] hub 1-0:1.0: USB hub found [ 1.373609] hub 1-0:1.0: 1 port detected [ 1.374275] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.374304] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 1.374330] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 1.374914] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 1.374933] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.374949] usb usb2: Product: xHCI Host Controller [ 1.374966] usb usb2: Manufacturer: Linux 5.10.32-v7l+ xhci-hcd [ 1.374981] usb usb2: SerialNumber: 0000:01:00.0 [ 1.375708] hub 2-0:1.0: USB hub found [ 1.375803] hub 2-0:1.0: 4 ports detected [ 1.377527] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.377845] dwc_otg: FIQ enabled [ 1.377859] dwc_otg: NAK holdoff enabled [ 1.377874] dwc_otg: FIQ split-transaction FSM enabled [ 1.377892] Module dwc_common_port init [ 1.378373] usbcore: registered new interface driver uas [ 1.378483] usbcore: registered new interface driver usb-storage [ 1.378682] mousedev: PS/2 mouse device common for all mice [ 1.380361] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 1.383924] sdhci: Secure Digital Host Controller Interface driver [ 1.383940] sdhci: Copyright(c) Pierre Ossman [ 1.384680] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [ 1.385275] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.389458] ledtrig-cpu: registered to indicate activity on CPUs [ 1.389799] hid: raw HID events driver (C) Jiri Kosina [ 1.389990] usbcore: registered new interface driver usbhid [ 1.390004] usbhid: USB HID core driver [ 1.395943] Initializing XFRM netlink socket [ 1.395988] NET: Registered protocol family 17 [ 1.396130] Key type dns_resolver registered [ 1.396695] Registering SWP/SWPB emulation handler [ 1.396897] registered taskstats version 1 [ 1.396925] Loading compiled-in X.509 certificates [ 1.397773] Key type ._fscrypt registered [ 1.397789] Key type .fscrypt registered [ 1.397804] Key type fscrypt-provisioning registered [ 1.409622] uart-pl011 fe201000.serial: there is not valid maps for state default [ 1.409945] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 1.410023] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2 [ 1.416809] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 1.417911] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 1.417928] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 1.448253] of_cfs_init [ 1.448526] of_cfs_init: OK [ 1.469742] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 1.471430] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.473161] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.476239] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.477928] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.484706] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA [ 1.485402] Waiting for root device PARTUUID=1e601bc1-02... [ 1.516978] random: fast init done [ 1.526001] mmc0: Problem switching card into high-speed mode! [ 1.526266] mmc0: new SDHC card at address 21cf [ 1.527314] mmcblk0: mmc0:21cf APPSD 31.3 GiB [ 1.529981] mmcblk0: p1 [ 1.543702] mmc1: new high speed SDIO card at address 0001 [ 1.734646] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.917392] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [ 1.917414] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.917431] usb 1-1: Product: USB2.0 Hub [ 1.919326] hub 1-1:1.0: USB hub found [ 1.919638] hub 1-1:1.0: 4 ports detected [ 2.065010] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 2.096730] usb 2-2: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00 [ 2.096749] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.096766] usb 2-2: Product: Flash Drive FIT [ 2.096783] usb 2-2: Manufacturer: Samsung [ 2.096799] usb 2-2: SerialNumber: 0373619120035595 [ 2.167358] usb-storage 2-2:1.0: USB Mass Storage device detected [ 2.167978] usb-storage 2-2:1.0: Quirks match for vid 090c pid 1000: 400 [ 2.168184] scsi host0: usb-storage 2-2:1.0 [ 2.244642] usb 1-1.4: new high-speed USB device number 3 using xhci_hcd [ 2.375311] usb 1-1.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 [ 2.375330] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.375347] usb 1-1.4: Product: USB 2.0 Hub [ 2.377336] hub 1-1.4:1.0: USB hub found [ 2.377480] hub 1-1.4:1.0: 4 ports detected [ 2.794676] usb 1-1.4.1: new high-speed USB device number 4 using xhci_hcd [ 3.026317] usb 1-1.4.1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice= 9.01 [ 3.026336] usb 1-1.4.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.026353] usb 1-1.4.1: Product: USB2.0 Hub [ 3.028358] hub 1-1.4.1:1.0: USB hub found [ 3.028727] hub 1-1.4.1:1.0: 4 ports detected [ 3.224638] usb 1-1.4.2: new low-speed USB device number 5 using xhci_hcd [ 3.462758] usb 1-1.4.2: New USB device found, idVendor=0c45, idProduct=7000, bcdDevice= 0.01 [ 3.462778] usb 1-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.462796] usb 1-1.4.2: Product: iPazzPort [ 3.462812] usb 1-1.4.2: Manufacturer: RCMCU [ 3.473048] input: RCMCU iPazzPort as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2:1.0/0003:0C45:7000.0001/input/input0 [ 3.535528] hid-generic 0003:0C45:7000.0001: input,hidraw0: USB HID v1.11 Keyboard [RCMCU iPazzPort] on usb-0000:01:00.0-1.4.2/input0 [ 3.545816] input: RCMCU iPazzPort Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2:1.1/0003:0C45:7000.0002/input/input1 [ 3.546301] input: RCMCU iPazzPort System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2:1.1/0003:0C45:7000.0002/input/input2 [ 3.554649] usb 1-1.4.1.3: new high-speed USB device number 6 using xhci_hcd [ 3.614997] input: RCMCU iPazzPort Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2:1.1/0003:0C45:7000.0002/input/input3 [ 3.615353] hid-generic 0003:0C45:7000.0002: input,hidraw1: USB HID v1.11 Mouse [RCMCU iPazzPort] on usb-0000:01:00.0-1.4.2/input1 [ 3.685973] usb 1-1.4.1.3: config 1 interface 0 altsetting 1 endpoint 0x82 has invalid wMaxPacketSize 0 [ 3.686446] usb 1-1.4.1.3: New USB device found, idVendor=0ccd, idProduct=10b2, bcdDevice= 1.00 [ 3.686465] usb 1-1.4.1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 3.686482] usb 1-1.4.1.3: Product: TERRATCE H5 MKII [ 3.686498] usb 1-1.4.1.3: Manufacturer: TERRATEC [ 3.686514] usb 1-1.4.1.3: SerialNumber: 123456789ABCD [ 3.884640] usb 1-1.4.3: new high-speed USB device number 7 using xhci_hcd [ 4.115328] usb 1-1.4.3: New USB device found, idVendor=214b, idProduct=7250, bcdDevice= 1.00 [ 4.115347] usb 1-1.4.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.115364] usb 1-1.4.3: Product: USB2.0 HUB [ 4.117135] hub 1-1.4.3:1.0: USB hub found [ 4.117240] hub 1-1.4.3:1.0: 4 ports detected [ 4.214639] usb 1-1.4.1.4: new high-speed USB device number 8 using xhci_hcd [ 4.428099] scsi 0:0:0:0: Direct-Access Samsung Flash Drive FIT 1100 PQ: 0 ANSI: 6 [ 4.429209] sd 0:0:0:0: [sda] 250626566 512-byte logical blocks: (128 GB/120 GiB) [ 4.429541] sd 0:0:0:0: [sda] Write Protect is off [ 4.429562] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 4.429997] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.432227] sda: sda1 sda2 [ 4.435158] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 4.449761] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [ 4.449780] EXT4-fs (sda2): write access will be enabled during recovery [ 4.478644] usb 1-1.4.1.4: New USB device found, idVendor=04fc, idProduct=0171, bcdDevice= 1.00 [ 4.478664] usb 1-1.4.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.478682] usb 1-1.4.1.4: Product: General Image Devic [ 4.478699] usb 1-1.4.1.4: Manufacturer: Sunplus Co Ltd [ 4.478715] usb 1-1.4.1.4: SerialNumber: 01.00.00 [ 4.482453] usb-storage 1-1.4.1.4:1.0: USB Mass Storage device detected [ 4.483170] scsi host1: usb-storage 1-1.4.1.4:1.0 [ 5.264397] EXT4-fs (sda2): recovery complete [ 5.268715] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 5.268814] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [ 5.272589] devtmpfs: mounted [ 5.281663] Freeing unused kernel memory: 2048K [ 5.282004] Run /sbin/init as init process [ 5.282018] with arguments: [ 5.282032] /sbin/init [ 5.282047] splash [ 5.282061] with environment: [ 5.282075] HOME=/ [ 5.282089] TERM=linux [ 5.516847] scsi 1:0:0:0: Direct-Access General PQ: 0 ANSI: 0 CCS [ 5.520054] sd 1:0:0:0: [sdb] 15958016 512-byte logical blocks: (8.17 GB/7.61 GiB) [ 5.521830] sd 1:0:0:0: [sdb] Write Protect is off [ 5.521852] sd 1:0:0:0: [sdb] Mode Sense: 20 00 00 00 [ 5.523372] sd 1:0:0:0: [sdb] No Caching mode page found [ 5.523462] sd 1:0:0:0: [sdb] Assuming drive cache: write through [ 5.559566] sdb: sdb1 [ 5.559610] sdb: p1 size 15966208 extends beyond EOD, enabling native capacity [ 5.561727] sdb: sdb1 [ 5.561759] sdb: p1 size 15966208 extends beyond EOD, truncated [ 5.570509] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 5.616219] systemd[1]: System time before build time, advancing clock. [ 5.704265] NET: Registered protocol family 10 [ 5.705886] Segment Routing with IPv6 [ 5.761987] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 5.762966] systemd[1]: Detected architecture arm. [ 5.835782] systemd[1]: Set hostname to . [ 6.414502] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid ? /run/samba/smbd.pid; please update the unit file accordingly. [ 6.455938] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid ? /run/samba/nmbd.pid; please update the unit file accordingly. [ 6.572556] random: systemd: uninitialized urandom read (16 bytes read) [ 6.583703] random: systemd: uninitialized urandom read (16 bytes read) [ 6.587196] systemd[1]: Created slice system-getty.slice. [ 6.587471] random: systemd: uninitialized urandom read (16 bytes read) [ 6.588575] systemd[1]: Created slice User and Session Slice. [ 6.589910] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 6.590048] systemd[1]: Reached target Swap. [ 6.590471] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 6.768385] i2c /dev entries driver [ 7.997985] EXT4-fs (sda2): re-mounted. Opts: (null) [ 8.110737] systemd-journald[126]: Received request to flush runtime journal from PID 1 [ 8.375899] random: crng init done [ 8.375916] random: 7 urandom warning(s) missed due to ratelimiting [ 8.773317] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000 [ 8.779450] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000 [ 8.780747] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000 [ 8.784088] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000 [ 8.887314] mc: Linux media interface: v0.10 [ 8.897802] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 8.898933] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 8.903959] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 8.903987] [vc_sm_connected_init]: start [ 8.928869] videodev: Linux video capture interface: v2.00 [ 8.944303] [vc_sm_connected_init]: installed successfully [ 8.947147] bcm2835_audio bcm2835_audio: card created with 4 channels [ 8.950077] bcm2835_audio bcm2835_audio: card created with 2 channels [ 8.959607] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 8.960009] bcm2835_audio bcm2835_audio: card created with 2 channels [ 8.961041] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 8.977039] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 8.978823] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 8.981771] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 8.997924] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 8.997987] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 8.999458] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 8.999962] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 9.000413] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 9.000755] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 9.000786] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 9.000812] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 9.000878] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 9.000901] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 9.001134] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 9.005649] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 9.005711] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 9.016979] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 9.017031] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 9.394679] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4]) [ 9.411434] checking generic (3e530000 591000) vs hw (0 ffffffffffffffff) [ 9.411458] fb0: switching to vc4drmfb from simple [ 9.414246] Console: switching to colour dummy device 80x30 [ 9.455816] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0 [ 9.520570] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1 [ 9.541811] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 9.576494] Console: switching to colour frame buffer device 200x56 [ 9.576549] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device [ 9.583967] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.584208] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 9.664132] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 9.718936] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 9.741679] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 9.742503] usbcore: registered new interface driver brcmfmac [ 9.760472] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2 [ 9.984960] usb 1-1.4.1.3: dvb_usb_v2: usb_bulk_msg() failed=-22 [ 9.985040] dvb_usb_af9035: probe of 1-1.4.1.3:1.0 failed with error -22 [ 9.985206] usbcore: registered new interface driver dvb_usb_af9035 [ 10.007967] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 10.020233] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e [ 10.040916] em28xx 1-1.4.1.3:1.0: New device TERRATEC TERRATCE H5 MKII @ 480 Mbps (0ccd:10b2, interface 0, class 0) [ 10.040939] em28xx 1-1.4.1.3:1.0: Audio interface 0 found (Vendor Class) [ 10.040959] em28xx 1-1.4.1.3:1.0: Video interface 0 found: isoc [ 10.041017] em28xx 1-1.4.1.3:1.0: DVB interface 0 found: isoc [ 10.104814] em28xx 1-1.4.1.3:1.0: chip ID is em2884 [ 10.184743] em28xx 1-1.4.1.3:1.0: EEPROM ID = 26 00 00 00, EEPROM hash = 0xbcd5a8cf [ 10.184764] em28xx 1-1.4.1.3:1.0: EEPROM info: [ 10.184783] em28xx 1-1.4.1.3:1.0: microcode start address = 0x0004, boot configuration = 0x00 [ 10.191937] em28xx 1-1.4.1.3:1.0: I2S audio, 5 sample rates [ 10.191957] em28xx 1-1.4.1.3:1.0: 500mA max power [ 10.191978] em28xx 1-1.4.1.3:1.0: Table at offset 0x27, strings=0x2298, 0x1c6a, 0x1286 [ 10.256948] em28xx 1-1.4.1.3:1.0: Identified as Terratec Cinergy H6 rev. 2 (card=101) [ 10.256975] em28xx 1-1.4.1.3:1.0: Currently, V4L2 is not supported on this model [ 10.256993] em28xx 1-1.4.1.3:1.0: dvb set to isoc mode. [ 10.259991] usbcore: registered new interface driver em28xx [ 10.291622] em28xx 1-1.4.1.3:1.0: Binding audio extension [ 10.291645] em28xx 1-1.4.1.3:1.0: em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [ 10.291667] em28xx 1-1.4.1.3:1.0: em28xx-audio.c: Copyright (C) 2007-2016 Mauro Carvalho Chehab [ 10.291778] em28xx 1-1.4.1.3:1.0: Endpoint 0x83 high-speed on intf 0 alt 7 interval = 8, size 196 [ 10.291798] em28xx 1-1.4.1.3:1.0: Number of URBs: 1, with 64 packets and 192 size [ 10.292682] em28xx 1-1.4.1.3:1.0: Audio extension successfully initialized [ 10.292701] em28xx: Registered (Em28xx Audio Extension) extension [ 10.318360] em28xx 1-1.4.1.3:1.0: Binding DVB extension [ 10.923074] em28xx 1-1.4.1.3:1.0: Direct firmware load for dvb-usb-terratec-htc-stick-drxk.fw failed with error -2 [ 10.923099] drxk: Could not load firmware file dvb-usb-terratec-htc-stick-drxk.fw. [ 10.923114] drxk: Copy dvb-usb-terratec-htc-stick-drxk.fw to your hotplug directory! [ 10.942058] drxk: status = 0x439260d9 [ 10.942080] drxk: detected a drx-3926k, spin A2, xtal 20.250 MHz [ 11.039013] drxk: DRXK driver version 0.9.4300 [ 11.074564] drxk: frontend initialized. [ 11.093669] tda18271 12-0060: creating new instance [ 11.095747] tda18271: TDA18271HD/C2 detected @ 12-0060 [ 11.546115] dvbdev: DVB: registering new adapter (1-1.4.1.3:1.0) [ 11.546148] em28xx 1-1.4.1.3:1.0: DVB: registering adapter 0 frontend 0 (DRXK DVB-C DVB-T)... [ 11.546183] dvbdev: dvb_create_media_entity: media entity 'DRXK DVB-C DVB-T' registered. [ 11.549395] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. [ 11.567284] em28xx 1-1.4.1.3:1.0: DVB extension successfully initialized [ 11.567308] em28xx: Registered (Em28xx dvb Extension) extension [ 11.588031] em28xx 1-1.4.1.3:1.0: Registering input extension [ 11.588443] Registered IR keymap rc-nec-terratec-cinergy-xs [ 11.588956] rc rc0: Terratec Cinergy H6 rev. 2 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1.3/1-1.4.1.3:1.0/rc/rc0 [ 11.589199] rc rc0: lirc_dev: driver em28xx registered at minor = 0, scancode receiver, no transmitter [ 11.589407] input: Terratec Cinergy H6 rev. 2 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1.3/1-1.4.1.3:1.0/rc/rc0/input4 [ 11.590744] em28xx 1-1.4.1.3:1.0: Input extension successfully initialized [ 11.590764] em28xx: Registered (Em28xx Input Extension) extension [ 12.862861] uart-pl011 fe201000.serial: no DMA platform data [ 13.556121] 8021q: 802.1Q VLAN Support v1.8 [ 13.804927] Adding 102396k swap on /var/swap. Priority:-2 extents:2 across:102400k FS [ 14.390265] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 14.743870] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 14.744194] bcmgenet fd580000.ethernet eth0: Link is Down [ 16.313571] tda18271: performing RF tracking filter calibration [ 16.819614] broken atomic modeset userspace detected, disabling atomic [ 19.056880] tda18271: RF tracking filter calibration complete [ 19.056949] em28xx 1-1.4.1.3:1.0: DVB: adapter 0 frontend 0 frequency 0 out of range (47000000..864000000) [ 19.632479] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 20.439293] Bluetooth: Core ver 2.22 [ 20.439355] NET: Registered protocol family 31 [ 20.439362] Bluetooth: HCI device and connection manager initialized [ 20.439377] Bluetooth: HCI socket layer initialized [ 20.439387] Bluetooth: L2CAP socket layer initialized [ 20.439403] Bluetooth: SCO socket layer initialized [ 20.456577] Bluetooth: HCI UART driver ver 2.3 [ 20.456589] Bluetooth: HCI UART protocol H4 registered [ 20.456649] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 20.456801] Bluetooth: HCI UART protocol Broadcom registered [ 20.513113] fuse: init (API version 7.32) [ 20.748200] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.748210] Bluetooth: BNEP filters: protocol multicast [ 20.748227] Bluetooth: BNEP socket layer initialized [ 22.027754] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.wlan0.retrans_time - use net.ipv6.neigh.wlan0.retrans_time_ms instead [ 22.074718] Bluetooth: RFCOMM TTY layer initialized [ 22.074748] Bluetooth: RFCOMM socket layer initialized [ 22.074771] Bluetooth: RFCOMM ver 1.11 [ 25.247369] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 25.456375] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 55.254111] drxk: i2c read error at addr 0x29 [ 58.246442] drxk: ERROR: -32000 while sending cmd 0x0205 with params: [ 58.246451] drxk: Error -22 on get_qam_lock_status [ 58.246458] drxk: Error -22 on get_lock_status [ 61.247129] drxk: ERROR: -32000 while sending cmd 0x0205 with params: [ 61.247146] drxk: Error -22 on get_qam_lock_status [ 61.247162] drxk: Error -22 on get_lock_status [ 62.247145] drxk: ERROR: -32000 while sending cmd 0x0205 with params: [ 62.247158] drxk: Error -22 on get_qam_lock_status [ 62.247170] drxk: Error -22 on get_lock_status [ 63.247424] drxk: ERROR: -32000 while sending cmd 0x0205 with params: [ 63.247443] drxk: Error -22 on get_qam_lock_status [ 63.247461] drxk: Error -22 on get_lock_status [ 81.672083] em28xx 1-1.4.1.3:1.0: write to i2c device at 0x52 failed with unknown error (status=1) [ 81.672094] drxk: i2c read error at addr 0x29 [ 114.345107] drxk: ERROR: -32000 while sending cmd 0x0205 with params: [ 114.345115] drxk: Error -22 on get_qam_lock_status [ 114.345123] drxk: Error -22 on get_lock_status [ 114.881245] drxk: ERROR: -32000 while sending cmd 0x0205 with params: [ 114.881264] drxk: Error -22 on get_qam_lock_status [ 114.881281] drxk: Error -22 on get_lock_status [ 116.037412] input: 5A:5A:5A:A6:08:6E as /devices/virtual/input/input5 [ 116.345333] drxk: ERROR: -32000 while sending cmd 0x0205 with params: [ 116.345344] drxk: Error -22 on get_qam_lock_status [ 116.345352] drxk: Error -22 on get_lock_status [ 123.346494] drxk: ERROR: -32000 while sending cmd 0x0205 with params: [ 123.346515] drxk: Error -22 on get_qam_lock_status [ 123.346533] drxk: Error -22 on get_lock_status