[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.52-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1123 SMP Wed Jun 27 17:35:49 BST 2018 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 8 MiB at 0x37800000 [ 0.000000] percpu: Embedded 17 pages/cpu @b6fbf000 s38720 r8192 d22720 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 227360 [ 0.000000] Kernel command line: 8250.nr_uarts=1 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=PARTUUID=15ca46a5-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait plymouth.ignore-serial-consoles [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 887456K/917504K available (7168K kernel code, 575K rwdata, 2072K rodata, 1024K init, 706K bss, 21856K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xb8800000 - 0xff800000 (1136 MB) [ 0.000000] lowmem : 0x80000000 - 0xb8000000 ( 896 MB) [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB) [ 0.000000] .text : 0x80008000 - 0x80800000 (8160 kB) [ 0.000000] .init : 0x80b00000 - 0x80c00000 (1024 kB) [ 0.000000] .data : 0x80c00000 - 0x80c8fef4 ( 576 kB) [ 0.000000] .bss : 0x80c96f40 - 0x80d47874 ( 707 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 25258 entries in 75 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000022] Switching to timer-based delay loop, resolution 52ns [ 0.000275] Console: colour dummy device 80x30 [ 0.000818] console [tty1] enabled [ 0.000859] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000899] pid_max: default: 32768 minimum: 301 [ 0.001227] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001261] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002214] Disabling memory control group subsystem [ 0.002306] CPU: Testing write buffer coherency: ok [ 0.002712] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003110] Setting up static identity map for 0x100000 - 0x10003c [ 0.003244] Hierarchical SRCU implementation. [ 0.003893] smp: Bringing up secondary CPUs ... [ 0.004594] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.005343] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.006079] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.006183] smp: Brought up 1 node, 4 CPUs [ 0.006254] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.006275] CPU: All CPU(s) started in HYP mode. [ 0.006293] CPU: Virtualization extensions available. [ 0.007151] devtmpfs: initialized [ 0.017221] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0 [ 0.017980] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.018218] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.018263] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.018833] pinctrl core: initialized pinctrl subsystem [ 0.019586] NET: Registered protocol family 16 [ 0.022302] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.027190] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.027222] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.027437] Serial: AMBA PL011 UART driver [ 0.029119] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.029597] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe [ 0.061536] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1 [ 0.062980] SCSI subsystem initialized [ 0.063222] usbcore: registered new interface driver usbfs [ 0.063292] usbcore: registered new interface driver hub [ 0.063392] usbcore: registered new device driver usb [ 0.070080] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-07-03 14:15 [ 0.071486] clocksource: Switched to clocksource arch_sys_counter [ 0.147540] VFS: Disk quotas dquot_6.6.0 [ 0.147653] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.147854] FS-Cache: Loaded [ 0.148066] CacheFiles: Loaded [ 0.156874] NET: Registered protocol family 2 [ 0.157613] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.157742] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.157945] TCP: Hash tables configured (established 8192 bind 8192) [ 0.158091] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.158152] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.158395] NET: Registered protocol family 1 [ 0.158846] RPC: Registered named UNIX socket transport module. [ 0.158870] RPC: Registered udp transport module. [ 0.158889] RPC: Registered tcp transport module. [ 0.158908] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.160490] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 0.163238] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.171188] FS-Cache: Netfs 'nfs' registered for caching [ 0.171840] NFS: Registering the id_resolver key type [ 0.171883] Key type id_resolver registered [ 0.171902] Key type id_legacy registered [ 0.171930] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.173832] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.173979] io scheduler noop registered [ 0.174000] io scheduler deadline registered (default) [ 0.174289] io scheduler cfq registered [ 0.174311] io scheduler mq-deadline registered [ 0.174331] io scheduler kyber registered [ 0.176622] BCM2708FB: allocated DMA memory f7900000 [ 0.176665] BCM2708FB: allocated DMA channel 0 @ b8813000 [ 0.226577] Console: switching to colour frame buffer device 228x61 [ 0.256185] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [ 0.257825] bcm2835-rng 3f104000.rng: hwrng registered [ 0.258104] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.258802] vc-sm: Videocore shared memory driver [ 0.259216] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 0.269133] brd: module loaded [ 0.278163] loop: module loaded [ 0.278300] Loading iSCSI transport class v2.0-870. [ 0.279121] libphy: Fixed MDIO Bus: probed [ 0.279349] usbcore: registered new interface driver lan78xx [ 0.279566] usbcore: registered new interface driver smsc95xx [ 0.279746] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.508040] Core Release: 2.80a [ 0.508144] Setting default values for core params [ 0.508304] Finished setting default values for core params [ 0.708706] Using Buffer DMA mode [ 0.708813] Periodic Transfer Interrupt Enhancement - disabled [ 0.708980] Multiprocessor Interrupt Enhancement - disabled [ 0.709142] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 0.709278] Dedicated Tx FIFOs mode [ 0.709742] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7914000 dma = 0xf7914000 len=9024 [ 0.710039] FIQ FSM acceleration enabled for : [ 0.710039] Non-periodic Split Transactions [ 0.710039] Periodic Split Transactions [ 0.710039] High-Speed Isochronous Endpoints [ 0.710039] Interrupt/Control Split Transaction hack enabled [ 0.717547] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805e7fa8 [ 0.724479] WARN::hcd_init_fiq:460: FIQ ASM at 0x805e8310 length 36 [ 0.731380] WARN::hcd_init_fiq:486: MPHI regs_base at 0xb887e000 [ 0.738295] dwc_otg 3f980000.usb: DWC OTG Controller [ 0.745121] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 0.752038] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000 [ 0.758825] Init: Port Power? op_state=1 [ 0.765602] Init: Power Port (0) [ 0.772518] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.779321] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.786289] usb usb1: Product: DWC OTG Controller [ 0.793178] usb usb1: Manufacturer: Linux 4.14.52-v7+ dwc_otg_hcd [ 0.800101] usb usb1: SerialNumber: 3f980000.usb [ 0.807523] hub 1-0:1.0: USB hub found [ 0.814289] hub 1-0:1.0: 1 port detected [ 0.821780] usbcore: registered new interface driver usb-storage [ 0.828619] mousedev: PS/2 mouse device common for all mice [ 0.835456] IR NEC protocol handler initialized [ 0.842190] IR RC5(x/sz) protocol handler initialized [ 0.848947] IR RC6 protocol handler initialized [ 0.855641] IR JVC protocol handler initialized [ 0.862129] IR Sony protocol handler initialized [ 0.868673] IR SANYO protocol handler initialized [ 0.875183] IR Sharp protocol handler initialized [ 0.881688] IR MCE Keyboard/mouse protocol handler initialized [ 0.888273] IR XMP protocol handler initialized [ 0.895571] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer [ 0.902598] bcm2835-cpufreq: min=600000 max=1400000 [ 0.909641] sdhci: Secure Digital Host Controller Interface driver [ 0.916432] sdhci: Copyright(c) Pierre Ossman [ 0.923601] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe [ 0.930654] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe [ 0.937543] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.946484] ledtrig-cpu: registered to indicate activity on CPUs [ 0.953319] hidraw: raw HID events driver (C) Jiri Kosina [ 0.960027] usbcore: registered new interface driver usbhid [ 0.966721] usbhid: USB HID core driver [ 0.973972] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0 [ 0.982261] [vc_sm_connected_init]: start [ 0.992185] [vc_sm_connected_init]: end - returning 0 [ 0.999618] Initializing XFRM netlink socket [ 1.006427] NET: Registered protocol family 17 [ 1.013206] Key type dns_resolver registered [ 1.020430] Registering SWP/SWPB emulation handler [ 1.027708] registered taskstats version 1 [ 1.034533] Indeed it is in host mode hprt0 = 00021501 [ 1.047289] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 1.054188] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2 [ 1.129478] random: fast init done [ 1.241531] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 1.241658] Indeed it is in host mode hprt0 = 00001101 [ 1.471767] usb 1-1: New USB device found, idVendor=0424, idProduct=2514 [ 1.471777] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.472444] hub 1-1:1.0: USB hub found [ 1.472520] hub 1-1:1.0: 4 ports detected [ 1.791515] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 1.921729] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514 [ 1.921739] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.922215] hub 1-1.1:1.0: USB hub found [ 1.922294] hub 1-1.1:1.0: 3 ports detected [ 2.021514] usb 1-173: new high-speed USB device number 4 using dwc_otg [ 2.0b1580] Under-voltage detected! (0x00050005) [ 2.151876] usb 1-1.3: New USB device found, idVendor=1a40, idProduct=0101 [ 2.151885] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.151892] usb 1-1.3: Product: USB 2.0 Hub [ 2.152370] hub 1-1.3:1.0: USB hub found [ 2.152455] hub 1-1.3:1.0: 4 ports detected [ 2.191871] console [ttyAMA0] enabled [ 2.204312] 3f215040.serial: ttyS0 at MMIO 0x0 (irq = 166, base_baud = 50000000) is a 16550 [ 2.220584] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0 [ 2.233287] mmc-bcm2835 3f300000.mmc: DMA channel allocated [ 2.302221] sdhost: log_buf @ b7913000 (f7913000) [ 2.350090] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 2.364011] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 2.377834] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 2.391512] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 2.404830] of_cfs_init [ 2.414110] of_cfs_init: OK [ 2.423907] uart-pl011 3f201000.serial: no DMA platform data [ 2.424878] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.448645] Waiting for root device PARTUUID=15ca46a5-02... [ 2.469002] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.471525] usb 1-1.3.1: new high-speed USB device number 5 using dwc_otg [ 2.500557] mmc0: new high speed SDHC card at address 59b4 [ 2.513479] mmcblk0: mmc0:59b4 00000 29.8 GiB [ 2.526075] mmcblk0: p1 p2 [ 2.552558] mmc1: new high speed SDIO card at address 0001 [ 2.564629] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.564685] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.575913] devtmpfs: mounted [ 2.605346] Freeing unused kernel memory: 1024K [ 2.632329] usb 1-1.3.1: New USB device found, idVendor=1a40, idProduct=0101 [ 2.646473] usb 1-1.3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.661077] usb 1-1.3.1: Product: USB 2.0 Hub [ 2.673281] hub 1-1.3.1:1.0: USB hub found [ 2.684619] hub 1-1.3.1:1.0: 4 ports detected [ 2.741536] usb 1-1.1.1: new high-speed USB device number 6 using dwc_otg [ 2.902054] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800 [ 2.916528] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.002255] usb 1-1.3.2: new high-speed USB device number 7 using dwc_otg [ 3.163646] usb 1-1.3.2: New USB device found, idVendor=2001, idProduct=4a00 [ 3.178025] usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.192781] usb 1-1.3.2: Product: D-Link DUB-1312 [ 3.204747] usb 1-1.3.2: Manufacturer: D-Link Elec. Corp. [ 3.217376] usb 1-1.3.2: SerialNumber: 00000000000E37 [ 3.291545] usb 1-1.3.1.1: new high-speed USB device number 8 using dwc_otg [ 3.406085] systemd[1]: System time before build time, advancing clock. [ 3.432048] usb 1-1.3.1.1: New USB device found, idVendor=1a40, idProduct=0101 [ 3.446549] usb 1-1.3.1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.461397] usb 1-1.3.1.1: Product: USB 2.0 Hub [ 3.462116] hub 1-1.3.1.1:1.0: USB hub found [ 3.462202] hub 1-1.3.1.1:1.0: 4 ports detected [ 3.500118] libphy: lan78xx-mdiobus: probed [ 3.541524] usb 1-1.3.4: new full-speed USB device number 9 using dwc_otg [ 3.577018] NET: Registered protocol family 10 [ 3.590017] Segment Routing with IPv6 [ 3.612372] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.662091] random: systemd: uninitialized urandom read (16 bytes read) [ 3.683924] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 3.696155] usb 1-1.3.4: New USB device found, idVendor=045e, idProduct=0745 [ 3.696165] usb 1-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.696172] usb 1-1.3.4: Product: Microsoft® 2.4GHz Transceiver v8.0 [ 3.696178] usb 1-1.3.4: Manufacturer: Microsoft [ 3.767061] systemd[1]: Detected architecture arm. [ 3.779940] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3.4/1-1.3.4:1.0/0003:045E:0745.0001/input/input0 [ 3.803182] usb 1-1.3.1.1.1: new high-speed USB device number 10 using dwc_otg Welcome to Raspbian GNU/Linux 9 (stretch)! [ 3.854916] systemd[1]: Set hostname to . [ 3.882123] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-3f980000.usb-1.3.4/input0 [ 3.919538] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3.4/1-1.3.4:1.1/0003:045E:0745.0002/input/input1 [ 3.944794] usb 1-1.3.1.1.1: New USB device found, idVendor=1058, idProduct=0748 [ 3.961177] usb 1-1.3.1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 3.977945] usb 1-1.3.1.1.1: Product: My Passport 0748 [ 3.991965] usb 1-1.3.1.1.1: Manufacturer: Western Digital [ 3.996575] random: systemd: uninitialized urandom read (16 bytes read) [ 4.023471] usb 1-1.3.1.1.1: SerialNumber: 575841314534324D58453637 [ 4.039400] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-3f980000.usb-1.3.4/input1 [ 4.064306] usb-storage 1-1.3.1.1.1:1.0: USB Mass Storage device detected [ 4.083451] scsi host0: usb-storage 1-1.3.1.1.1:1.0 [ 4.109557] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3.4/1-1.3.4:1.2/0003:045E:0745.0003/input/input2 [ 4.119713] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read) [ 4.232055] hid-generic 0003:045E:0745.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-3f980000.usb-1.3.4/input2 [ 4.754402] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 4.801994] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 4.851810] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 4.891724] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 4.937352] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 4.982540] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ OK ] Set up automount Arbitrary Executab…rmats File System Automount Point. [ 5.032403] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK 5.112274] scsi 0:0:0:0: Direct-Access WD My Passport 0748 1019 PQ: 0 ANSI: 6 m] Listening on Journal Socket. [ 5.133131] sd 0:0:0:0: [sda] 3906963456 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 5.152497] sd 0:0:0:0: [sda] Write Protect is off [ 5.167889] scsi 0:0:0:1: Enclosure WD SES Device 1019 PQ: 0 ANSI: 6 [ OK ] Created slice[ 5.186976] sd 0:0:0:0: [sda] No Caching mode page found System Slice. [ 5.203611] sd 0:0:0:0: [sda] Assuming drive cache: write through Starting Set the console keyboard layout... Mounting RPC Pipe File System... [ OK ] Created slice system-autologin.slice. Mounting POSIX Message Queue File System... [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ OK ] Reached target Slices. Mounting Debug File System... Starting Load Kernel Modules... [ 5.511321] i2c /dev entries driver Starting[ 5.546254] sda: sda1 sda2 Journal Service... [ 5.563374] sd 0:0:0:0: [sda] Attached SCSI disk [ OK ] Listening on udev Control Socket. Starting Create list of required st…ce nodes for the current kernel... [ OK ] Listening on fsck to fsckd communication Socket. Starting File System Check on Root Device... [ OK ] Mounted RPC Pipe File System. [ OK ] Mounted Debug File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Started Journal Service. [ OK ] Started Set the console keyboard layout. [ OK ] Started Load Kernel Modules. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Started File System Check on Root Device. [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Create Static Device Nodes in /dev... Mounting Configuration File System... Starting Apply Kernel Va[ 6.137041] random: crng init done [ 6.151915] random: 7 urandom warning(s) missed due to ratelimiting riables... [ OK ] Mounted Configuration File System. [ OK ] Started Apply Kernel Variables. [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ OK ] Started udev Kernel Device Manager. [ OK ] Started Remount Root and Kernel File Systems. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems (Pre). Starting Flush Journal to Persistent Storage... Starting udev Coldplug all Devices... [ OK ] Started Load/Save Random Seed. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started udev Coldplug all Devices. Starting Show Plymouth Boot Screen... Raspbian GNU/Linux 9 pi-desktop ttyAMA0 pi-desktop login: Raspbian GNU/Linux 9 pi-desktop ttyAMA0 pi-desktop login: [ 1155.133526] Unable to handle kernel paging request at virtual address 40018684 [ 1155.141016] pgd = 80004000 [ 1155.143975] [40018684] *pgd=00000000 [ 1155.147763] Internal error: Oops: 5 [#1] SMP ARM [ 1155.152374] Modules linked in: fuse bluetooth ecdh_generic joydev evdev ax88179_178a rtc_pcf8563 brcmfmac brcmutil spidev cfg80211 rfkill snd_bcm2835(C) snd_pcm snd_timer snd i2c_bcm2835 spi_bcm2835 fixed uio_pdrv_genirq uio sg i2c_dev ip_tables x_tables ipv6 [ 1155.175374] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G C 4.14.52-v7+ #1123 [ 1155.183194] Hardware name: BCM2835 [ 1155.186588] task: 80c06cc0 task.stack: 80c00000 [ 1155.191116] PC is at lan78xx_bh+0x118/0x7a0 [ 1155.195299] LR is at _raw_spin_unlock_irqrestore+0x3c/0x70 [ 1155.200775] pc : [<805a096c>] lr : [<807a17bc>] psr: 88000113 [ 1155.207034] sp : 80c01dc8 ip : 80c04174 fp : 80c01e0c [ 1155.212249] r10: 00000040 r9 : b68cf558 r8 : b68cf500 [ 1155.217466] r7 : 00000002 r6 : b68cf558 r5 : 00000002 r4 : 0000004a [ 1155.223985] r3 : 00000001 r2 : 40018680 r1 : 00002328 r0 : 00000000 [ 1155.230504] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 1155.237631] Control: 10c5383d Table: 3320006a DAC: 00000055 [ 1155.243370] Process swapper/0 (pid: 0, stack limit = 0x80c00210) [ 1155.249369] Stack: (0x80c01dc8 to 0x80c02000) [ 1155.253720] 1dc0: 80c01e34 b68cf538 80690910 8067c8f0 0c0085ee 80c04a84 [ 1155.261894] 1de0: 36439000 b68cf568 b68cf56c 00000000 00000000 80b86310 00000018 00000040 [ 1155.270066] 1e00: 80c01e34 80c01e10 80123cc0 805a0860 80123c4c 80c02098 00000006 80c00038 [ 1155.278238] 1e20: 00000100 b6806180 80c01e9c 80c01e38 80101694 80123c58 80c01e5c 80c01e48 [ 1155.286410] 1e40: 00000001 00200102 80c02d00 00014e0a 00000007 80c978c0 80c88730 80c03d68 [ 1155.294581] 1e60: 80b86378 80c02080 80c01e38 00000007 80174f64 80b8e92c 00000000 00000000 [ 1155.302754] 1e80: 00000001 b6806180 80c00000 b77ff980 80c01eac 80c01ea0 8012378c 80101514 [ 1155.310926] 1ea0: 80c01ed4 80c01eb0 801755a8 801236b8 80c01ef0 80c046cc 68000013 ffffffff [ 1155.319097] 1ec0: 80c01f24 00000001 80c01eec 80c01ed8 80101504 80175544 80c04174 80108a50 [ 1155.327268] 1ee0: 80c01f4c 80c01ef0 807a1abc 80101468 00000000 039684c8 36439000 00000000 [ 1155.335439] 1f00: 80c00000 80c03dcc 80c03d68 80c88332 00000001 80b60a30 b77ff980 80c01f4c [ 1155.343613] 1f20: 80c04174 80c01f40 80108a4c 80108a50 68000013 ffffffff 80108a4c 00000000 [ 1155.351785] 1f40: 80c01f5c 80c01f50 807a120c 80108a28 80c01f84 80c01f60 80161214 807a11e4 [ 1155.359957] 1f60: 80b862c4 000000be 80c96f40 80c03d40 ffffffff 80c96f40 80c01f94 80c01f88 [ 1155.368128] 1f80: 80161528 80161148 80c01fac 80c01f98 8079af54 8016150c 80c0f7f0 80c96f90 [ 1155.376299] 1fa0: 80c01ff4 80c01fb0 80b00df8 8079aea4 ffffffff ffffffff 00000000 80b00750 [ 1155.384471] 1fc0: 00000000 80b60a30 00000000 80c971d4 80c03d58 80b60a2c 80c08a2c 0000406a [ 1155.392642] 1fe0: 410fd034 00000000 00000000 80c01ff8 0000807c 80b00a30 00000000 00000000 [ 1155.400827] [<805a096c>] (lan78xx_bh) from [<80123cc0>] (tasklet_action+0x74/0x10c) [ 1155.408482] [<80123cc0>] (tasklet_action) from [<80101694>] (__do_softirq+0x18c/0x3d8) [ 1155.416398] [<80101694>] (__do_softirq) from [<8012378c>] (irq_exit+0xe0/0x144) [ 1155.423705] [<8012378c>] (irq_exit) from [<801755a8>] (__handle_domain_irq+0x70/0xc4) [ 1155.431533] [<801755a8>] (__handle_domain_irq) from [<80101504>] (bcm2836_arm_irqchip_handle_irq+0xa8/0xac) [ 1155.441273] [<80101504>] (bcm2836_arm_irqchip_handle_irq) from [<807a1abc>] (__irq_svc+0x5c/0x7c) [ 1155.450137] Exception stack(0x80c01ef0 to 0x80c01f38) [ 1155.455183] 1ee0: 00000000 039684c8 36439000 00000000 [ 1155.463355] 1f00: 80c00000 80c03dcc 80c03d68 80c88332 00000001 80b60a30 b77ff980 80c01f4c [ 1155.471525] 1f20: 80c04174 80c01f40 80108a4c 80108a50 68000013 ffffffff [ 1155.478141] [<807a1abc>] (__irq_svc) from [<80108a50>] (arch_cpu_idle+0x34/0x4c) [ 1155.485535] [<80108a50>] (arch_cpu_idle) from [<807a120c>] (default_idle_call+0x34/0x48) [ 1155.493624] [<807a120c>] (default_idle_call) from [<80161214>] (do_idle+0xd8/0x150) [ 1155.501276] [<80161214>] (do_idle) from [<80161528>] (cpu_startup_entry+0x28/0x2c) [ 1155.508841] [<80161528>] (cpu_startup_entry) from [<8079af54>] (rest_init+0xbc/0xc0) [ 1155.516584] [<8079af54>] (rest_init) from [<80b00df8>] (start_kernel+0x3d4/0x3e0) [ 1155.524065] Code: e1a03004 e1a07005 ea000007 e59920a4 (e1d220b4) [ 1155.530504] ---[ end trace 70ffbcb65a2ddfed ]--- [ 1155.535298] Kernel panic - not syncing: Fatal exception in interrupt [ 1155.541653] CPU2: stopping [ 1155.544358] CPU: 2 PID: 19 Comm: ksoftirqd/2 Tainted: G D C 4.14.52-v7+ #1123 [ 1155.552439] Hardware name: BCM2835 [ 1155.555849] [<8010ffd8>] (unwind_backtrace) from [<8010c240>] (show_stack+0x20/0x24) [ 1155.563589] [<8010c240>] (show_stack) from [<80785e84>] (dump_stack+0xd4/0x118) [ 1155.570894] [<80785e84>] (dump_stack) from [<8010e458>] (handle_IPI+0x2bc/0x33c) [ 1155.578286] [<8010e458>] (handle_IPI) from [<801014d8>] (bcm2836_arm_irqchip_handle_irq+0x7c/0xac) [ 1155.587242] [<801014d8>] (bcm2836_arm_irqchip_handle_irq) from [<807a1abc>] (__irq_svc+0x5c/0x7c) [ 1155.596105] Exception stack(0xb6943e68 to 0xb6943eb0) [ 1155.601149] 3e60: 00000000 b68cf56c 00000001 00000002 b68cf568 b68cf56c [ 1155.609320] 3e80: 00000000 00000000 80b86310 00000018 00000040 b6943edc 00000000 b6943eb8 [ 1155.617490] 3ea0: 80123cec 80784d38 60000013 ffffffff [ 1155.622538] [<807a1abc>] (__irq_svc) from [<80784d38>] (_test_and_set_bit+0x20/0x4c) [ 1155.630278] [<80784d38>] (_test_and_set_bit) from [<80123cec>] (tasklet_action+0xa0/0x10c) [ 1155.638537] [<80123cec>] (tasklet_action) from [<80101694>] (__do_softirq+0x18c/0x3d8) [ 1155.646449] [<80101694>] (__do_softirq) from [<80123428>] (run_ksoftirqd+0x44/0x6c) [ 1155.654104] [<80123428>] (run_ksoftirqd) from [<80141d9c>] (smpboot_thread_fn+0x124/0x1a4) [ 1155.662366] [<80141d9c>] (smpboot_thread_fn) from [<8013d97c>] (kthread+0x13c/0x16c) [ 1155.670106] [<8013d97c>] (kthread) from [<8010810c>] (ret_from_fork+0x14/0x28) [ 1155.677320] CPU1: stopping [ 1155.680026] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D C 4.14.52-v7+ #1123 [ 1155.687846] Hardware name: BCM2835 [ 1155.691246] [<8010ffd8>] (unwind_backtrace) from [<8010c240>] (show_stack+0x20/0x24) [ 1155.698985] [<8010c240>] (show_stack) from [<80785e84>] (dump_stack+0xd4/0x118) [ 1155.706289] [<80785e84>] (dump_stack) from [<8010e458>] (handle_IPI+0x2bc/0x33c) [ 1155.713681] [<8010e458>] (handle_IPI) from [<801014d8>] (bcm2836_arm_irqchip_handle_irq+0x7c/0xac) [ 1155.722636] [<801014d8>] (bcm2836_arm_irqchip_handle_irq) from [<807a1abc>] (__irq_svc+0x5c/0x7c) [ 1155.731499] Exception stack(0xb6925f38 to 0xb6925f80) [ 1155.736542] 5f20: 00000000 037e1908 [ 1155.744713] 5f40: 3644a000 00000000 b6924000 80c03dcc 80c03d68 80c88332 00000001 410fd034 [ 1155.752885] 5f60: 00000000 b6925f94 80c04174 b6925f88 80108a4c 80108a50 68000013 ffffffff [ 1155.761059] [<807a1abc>] (__irq_svc) from [<80108a50>] (arch_cpu_idle+0x34/0x4c) [ 1155.768452] [<80108a50>] (arch_cpu_idle) from [<807a120c>] (default_idle_call+0x34/0x48) [ 1155.776540] [<807a120c>] (default_idle_call) from [<80161214>] (do_idle+0xd8/0x150) [ 1155.784192] [<80161214>] (do_idle) from [<80161528>] (cpu_startup_entry+0x28/0x2c) [ 1155.791756] [<80161528>] (cpu_startup_entry) from [<8010df50>] (secondary_start_kernel+0x130/0x13c) [ 1155.800798] [<8010df50>] (secondary_start_kernel) from [<0010196c>] (0x10196c) [ 1155.808013] CPU3: stopping [ 1155.810714] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D C 4.14.52-v7+ #1123 [ 1155.818535] Hardware name: BCM2835 [ 1155.821933] [<8010ffd8>] (unwind_backtrace) from [<8010c240>] (show_stack+0x20/0x24) [ 1155.829671] [<8010c240>] (show_stack) from [<80785e84>] (dump_stack+0xd4/0x118) [ 1155.836975] [<80785e84>] (dump_stack) from [<8010e458>] (handle_IPI+0x2bc/0x33c) [ 1155.844366] [<8010e458>] (handle_IPI) from [<801014d8>] (bcm2836_arm_irqchip_handle_irq+0x7c/0xac) [ 1155.853320] [<801014d8>] (bcm2836_arm_irqchip_handle_irq) from [<807a1abc>] (__irq_svc+0x5c/0x7c) [ 1155.862184] Exception stack(0xb6929f38 to 0xb6929f80) [ 1155.867227] 9f20: 00000000 004db96c [ 1155.875399] 9f40: 3646c000 00000000 b6928000 80c03dcc 80c03d68 80c88332 00000001 410fd034 [ 1155.883570] 9f60: 00000000 b6929f94 80c04174 b6929f88 80108a4c 80108a50 68000013 ffffffff [ 1155.891744] [<807a1abc>] (__irq_svc) from [<80108a50>] (arch_cpu_idle+0x34/0x4c) [ 1155.899136] [<80108a50>] (arch_cpu_idle) from [<807a120c>] (default_idle_call+0x34/0x48) [ 1155.907222] [<807a120c>] (default_idle_call) from [<80161214>] (do_idle+0xd8/0x150) [ 1155.914873] [<80161214>] (do_idle) from [<80161528>] (cpu_startup_entry+0x28/0x2c) [ 1155.922438] [<80161528>] (cpu_startup_entry) from [<8010df50>] (secondary_start_kernel+0x130/0x13c) [ 1155.931478] [<8010df50>] (secondary_start_kernel) from [<0010196c>] (0x10196c) [ 1155.938701] ---[ end Kernel panic - not syncing: Fatal exception in interrupt