[ 0.000000] Booting Linux on physical CPU 0xf00 [ 0.000000] Linux version 4.9.28-v7+ (root@rpi2.lan) (gcc version 4.9.4 (Gentoo 4.9.4 p1.0, pie-0.6.4) ) #28 SMP Fri May 19 12:35:30 CEST 2017 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt:Machine model: Raspberry Pi 2 Model B Rev 1.1 [ 0.000000] cma: Reserved 8 MiB at 0x3a800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 241664 [ 0.000000] free_area_init_node: node 0, pgdat 80c6edc0, node_mem_map b9faa000 [ 0.000000] Normal zone: 2124 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 241664 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 14 pages/cpu @b9f61000 s25600 r8192 d23552 u57344 [ 0.000000] pcpu-alloc: s25600 r8192 d23552 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 239540 [ 0.000000] Kernel command line: bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 root=/dev/mmcblk0p4 smsc95xx.turbo_mode=N rootdelay=2 elevator=noop console=ttyAMA0,115200 console=tty0 init=/usr/lib/systemd/systemd ro systemd.unit=multi-user.target systemd.journald.forward_to_console=1 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 936288K/966656K available (7168K kernel code, 483K rwdata, 2012K rodata, 1024K init, 778K bss, 22176K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xbb800000 - 0xff800000 (1088 MB) lowmem : 0x80000000 - 0xbb000000 ( 944 MB) modules : 0x7f000000 - 0x80000000 ( 16 MB) .text : 0x80008000 - 0x80800000 (8160 kB) .init : 0x80b00000 - 0x80c00000 (1024 kB) .data : 0x80c00000 - 0x80c78f94 ( 484 kB) .bss : 0x80c7a000 - 0x80d3ca64 ( 779 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000011] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000032] Switching to timer-based delay loop, resolution 52ns [ 0.000400] Console: colour dummy device 80x30 [ 0.001389] console [tty0] enabled [ 0.001446] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.001525] pid_max: default: 32768 minimum: 301 [ 0.001975] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002028] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003348] Disabling cpuset control group subsystem [ 0.003619] CPU: Testing write buffer coherency: ok [ 0.003717] ftrace: allocating 22386 entries in 66 pages [ 0.058724] CPU0: update cpu_capacity 1024 [ 0.058809] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 [ 0.058908] Setting up static identity map for 0x100000 - 0x100034 [ 0.062148] CPU1: update cpu_capacity 1024 [ 0.062159] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 [ 0.063231] CPU2: update cpu_capacity 1024 [ 0.063241] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 [ 0.064228] CPU3: update cpu_capacity 1024 [ 0.064238] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 [ 0.064354] Brought up 4 CPUs [ 0.064555] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.064589] CPU: All CPU(s) started in HYP mode. [ 0.064619] CPU: Virtualization extensions available. [ 0.065789] devtmpfs: initialized [ 0.081271] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.081744] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.081824] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.082645] pinctrl core: initialized pinctrl subsystem [ 0.083994] NET: Registered protocol family 16 [ 0.086652] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.097205] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.097268] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.097514] Serial: AMBA PL011 UART driver [ 0.099989] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.179870] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb80f000, dmachans=0x1 [ 0.182268] SCSI subsystem initialized [ 0.182523] usbcore: registered new interface driver usbfs [ 0.182654] usbcore: registered new interface driver hub [ 0.182835] usbcore: registered new device driver usb [ 0.188358] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-03-02 15:32 [ 0.190214] clocksource: Switched to clocksource arch_sys_counter [ 0.244980] VFS: Disk quotas dquot_6.6.0 [ 0.245137] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.245459] FS-Cache: Loaded [ 0.245838] CacheFiles: Loaded [ 0.262319] NET: Registered protocol family 2 [ 0.263592] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.263760] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.263979] TCP: Hash tables configured (established 8192 bind 8192) [ 0.264122] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.264211] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.264564] NET: Registered protocol family 1 [ 0.265259] RPC: Registered named UNIX socket transport module. [ 0.265304] RPC: Registered udp transport module. [ 0.265335] RPC: Registered tcp transport module. [ 0.265366] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.266528] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.269613] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.288589] FS-Cache: Netfs 'nfs' registered for caching [ 0.289927] NFS: Registering the id_resolver key type [ 0.289998] Key type id_resolver registered [ 0.290032] Key type id_legacy registered [ 0.293371] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.293600] io scheduler noop registered (default) [ 0.293640] io scheduler deadline registered [ 0.293998] io scheduler cfq registered [ 0.299833] BCM2708FB: allocated DMA memory fa900000 [ 0.299913] BCM2708FB: allocated DMA channel 0 @ bb80f000 [ 0.309574] Console: switching to colour frame buffer device 82x26 [ 0.319631] bcm2835-rng 3f104000.rng: hwrng registered [ 0.322411] vc-cma: Videocore CMA driver [ 0.324926] vc-cma: vc_cma_base = 0x00000000 [ 0.327438] vc-cma: vc_cma_size = 0x00000000 (0 MiB) [ 0.329992] vc-cma: vc_cma_initial = 0x00000000 (0 MiB) [ 0.332827] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB) [ 0.358592] brd: module loaded [ 0.372440] loop: module loaded [ 0.374762] Loading iSCSI transport class v2.0-870. [ 0.377812] usbcore: registered new interface driver smsc95xx [ 0.380248] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.608927] Core Release: 2.80a [ 0.611310] Setting default values for core params [ 0.613632] Finished setting default values for core params [ 0.816400] Using Buffer DMA mode [ 0.818710] Periodic Transfer Interrupt Enhancement - disabled [ 0.821173] Multiprocessor Interrupt Enhancement - disabled [ 0.823636] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 0.826130] Dedicated Tx FIFOs mode [ 0.829020] WARN::dwc_otg_hcd_init:1034: FIQ DMA bounce buffers: virt = 0xba914000 dma = 0xfa914000 len=9024 [ 0.834103] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 0.846950] dwc_otg: Microframe scheduler enabled [ 0.847017] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x8058e6ec [ 0.849623] WARN::hcd_init_fiq:460: FIQ ASM at 0x8058ea5c length 36 [ 0.852252] WARN::hcd_init_fiq:486: MPHI regs_base at 0xbb87a000 [ 0.854953] dwc_otg 3f980000.usb: DWC OTG Controller [ 0.857593] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 0.860322] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000 [ 0.862951] Init: Port Power? op_state=1 [ 0.865500] Init: Power Port (0) [ 0.868266] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.870916] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.873522] usb usb1: Product: DWC OTG Controller [ 0.876061] usb usb1: Manufacturer: Linux 4.9.28-v7+ dwc_otg_hcd [ 0.878625] usb usb1: SerialNumber: 3f980000.usb [ 0.882219] hub 1-0:1.0: USB hub found [ 0.884749] hub 1-0:1.0: 1 port detected [ 0.887961] dwc_otg: FIQ enabled [ 0.887967] dwc_otg: NAK holdoff enabled [ 0.887973] dwc_otg: FIQ split-transaction FSM enabled [ 0.887990] Module dwc_common_port init [ 0.888317] usbcore: registered new interface driver usb-storage [ 0.891175] mousedev: PS/2 mouse device common for all mice [ 0.894446] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer [ 0.897356] bcm2835-cpufreq: min=600000 max=900000 [ 0.900449] sdhci: Secure Digital Host Controller Interface driver [ 0.903076] sdhci: Copyright(c) Pierre Ossman [ 0.906004] sdhost-bcm2835 3f202000.sdhost: could not get clk, deferring probe [ 0.908960] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.912470] ledtrig-cpu: registered to indicate activity on CPUs [ 0.915372] hidraw: raw HID events driver (C) Jiri Kosina [ 0.918359] usbcore: registered new interface driver usbhid [ 0.921159] usbhid: USB HID core driver [ 0.924849] vchiq: vchiq_init_state: slot_zero = 0xba980000, is_master = 0 [ 0.929813] Initializing XFRM netlink socket [ 0.932730] NET: Registered protocol family 17 [ 0.935678] Key type dns_resolver registered [ 0.938850] Registering SWP/SWPB emulation handler [ 0.942569] registered taskstats version 1 [ 0.945739] vc-sm: Videocore shared memory driver [ 0.948472] [vc_sm_connected_init]: start [ 0.951995] [vc_sm_connected_init]: end - returning 0 [ 0.960887] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2 [ 1.905439] console [ttyAMA0] enabled [ 1.913879] sdhost: log_buf @ ba913000 (fa913000) [ 2.000258] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 2.008621] of_cfs_init [ 2.013887] of_cfs_init: OK [ 2.019616] Waiting 2 sec before mounting root device... [ 2.050360] Indeed it is in host mode hprt0 = 00021501 [ 2.125472] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.140715] mmc0: new high speed SDHC card at address 59b4 [ 2.149511] random: fast init done [ 2.149791] mmcblk0: mmc0:59b4 USD 7.51 GiB [ 2.162541] mmcblk0: p1 p2 p3 p4 [ 2.250263] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 2.259517] Indeed it is in host mode hprt0 = 00001101 [ 2.490584] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 2.500046] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.510971] hub 1-1:1.0: USB hub found [ 2.517621] hub 1-1:1.0: 5 ports detected [ 2.840249] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 2.970573] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 2.980186] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.993244] smsc95xx v1.0.5 [ 3.085094] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:a4:80:12 [ 3.200257] usb 1-1.3: new high-speed USB device number 4 using dwc_otg [ 3.330788] usb 1-1.3: New USB device found, idVendor=1a40, idProduct=0201 [ 3.340767] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.351108] usb 1-1.3: Product: USB 2.0 Hub [MTT] [ 3.359627] hub 1-1.3:1.0: USB hub found [ 3.366528] hub 1-1.3:1.0: 7 ports detected [ 3.470256] usb 1-1.5: new high-speed USB device number 5 using dwc_otg [ 3.600624] usb 1-1.5: New USB device found, idVendor=0409, idProduct=005a [ 3.610479] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.621549] hub 1-1.5:1.0: USB hub found [ 3.628404] hub 1-1.5:1.0: 4 ports detected [ 3.700260] usb 1-1.3.2: new high-speed USB device number 6 using dwc_otg [ 3.831139] usb 1-1.3.2: New USB device found, idVendor=2013, idProduct=024f [ 3.841044] usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.854131] usb 1-1.3.2: Product: PCTV 290e [ 3.861142] usb 1-1.3.2: Manufacturer: PCTV Systems [ 3.868806] usb 1-1.3.2: SerialNumber: 00000010VKB7 [ 3.970257] usb 1-1.5.1: new high-speed USB device number 7 using dwc_otg [ 4.091960] EXT4-fs (mmcblk0p4): couldn't mount as ext3 due to feature incompatibilities [ 4.100743] usb 1-1.5.1: New USB device found, idVendor=0409, idProduct=005a [ 4.100755] usb 1-1.5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.101726] hub 1-1.5.1:1.0: USB hub found [ 4.101857] hub 1-1.5.1:1.0: 4 ports detected [ 4.142877] EXT4-fs (mmcblk0p4): couldn't mount as ext2 due to feature incompatibilities [ 4.169297] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null) [ 4.183308] VFS: Mounted root (ext4 filesystem) readonly on device 179:4. [ 4.194585] devtmpfs: mounted [ 4.200300] usb 1-1.3.3: new high-speed USB device number 8 using dwc_otg [ 4.212483] Freeing unused kernel memory: 1024K (80b00000 - 80c00000) [ 4.331436] usb 1-1.3.3: New USB device found, idVendor=2013, idProduct=025f [ 4.341844] usb 1-1.3.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 4.355792] usb 1-1.3.3: Product: PCTV 292e [ 4.363354] usb 1-1.3.3: Manufacturer: PCTV [ 4.370806] usb 1-1.3.3: SerialNumber: 0011412129 [ 4.440312] usb 1-1.5.1.1: new high-speed USB device number 10 using dwc_otg [ 4.591315] usb 1-1.5.1.1: New USB device found, idVendor=152d, idProduct=2329 [ 4.601778] usb 1-1.5.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 4.615567] usb 1-1.5.1.1: Product: USB to ATA/ATAPI bridge [ 4.624382] usb 1-1.5.1.1: Manufacturer: JMicron [ 4.627252] NET: Registered protocol family 10 [ 4.639806] usb 1-1.5.1.1: SerialNumber: 66E49349 [ 4.649115] usb-storage 1-1.5.1.1:1.0: USB Mass Storage device detected [ 4.659551] usb-storage 1-1.5.1.1:1.0: Quirks match for vid 152d pid 2329: 8020 [ 4.670095] scsi host0: usb-storage 1-1.5.1.1:1.0 [ 4.682597] systemd[1]: systemd 228 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS -ACL -XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 4.710282] usb 1-1.5.3: new high-speed USB device number 9 using dwc_otg [ 4.710451] systemd[1]: Detected architecture arm. [ 4.745276] systemd[1]: Set hostname to . [ 4.846729] uart-pl011 3f201000.serial: no DMA platform data [ 4.856862] usb 1-1.5.3: New USB device found, idVendor=04e8, idProduct=61b5 [ 4.867028] usb 1-1.5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.880309] usb 1-1.5.3: Product: Samsung M3 Portable [ 4.888296] usb 1-1.5.3: Manufacturer: Samsung M3 Portable [ 4.896789] usb 1-1.5.3: SerialNumber: 0A247DF106000060 [ 4.906662] usb-storage 1-1.5.3:1.0: USB Mass Storage device detected [ 4.916645] scsi host1: usb-storage 1-1.5.3:1.0 [ 4.970306] usb 1-1.5.1.4: new full-speed USB device number 11 using dwc_otg [ 5.138210] usb 1-1.5.1.4: New USB device found, idVendor=1781, idProduct=0c31 [ 5.148669] usb 1-1.5.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.162152] usb 1-1.5.1.4: Product: TellStick Duo [ 5.169747] usb 1-1.5.1.4: Manufacturer: Telldus [ 5.177375] usb 1-1.5.1.4: SerialNumber: A703AJYN [ 5.250318] usb 1-1.5.4: new high-speed USB device number 12 using dwc_otg [ 5.390726] usb 1-1.5.4: New USB device found, idVendor=0409, idProduct=005a [ 5.400675] usb 1-1.5.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.414818] hub 1-1.5.4:1.0: USB hub found [ 5.421977] hub 1-1.5.4:1.0: 4 ports detected [ 5.691418] scsi 0:0:0:0: Direct-Access ST950032 5AS 0002 PQ: 0 ANSI: 2 CCS [ 5.707441] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 5.713241] systemd[1]: gssproxy.service: Cannot add dependency job, ignoring: Unit gssproxy.service failed to load: No such file or directory. [ 5.713292] systemd[1]: rpc-svcgssd.service: Cannot add dependency job, ignoring: Unit rpc-svcgssd.service failed to load: No such file or directory. [ 5.713331] systemd[1]: rpc-gssd.service: Cannot add dependency job, ignoring: Unit rpc-gssd.service failed to load: No such file or directory. [ 5.750265] usb 1-1.5.4.1: new full-speed USB device number 13 using dwc_otg [ 5.789319] sd 0:0:0:0: [sda] Write Protect is off [ 5.797429] sd 0:0:0:0: [sda] Mode Sense: 28 00 00 00 [ 5.797968] sd 0:0:0:0: [sda] No Caching mode page found [ 5.806623] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 5.807253] systemd[1]: Set up automount var-lib-timeshift.automount. [ 5.847755] systemd[1]: Listening on udev Control Socket. [ 5.861280] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation [ 5.881334] systemd[1]: Created slice User and Session Slice. [ 5.897439] systemd[1]: Created slice System Slice. [ 5.931691] scsi 1:0:0:0: Direct-Access Samsung M3 Portable 1404 PQ: 0 ANSI: 6 [ 5.933671] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 5.934322] sd 1:0:0:0: [sdb] Write Protect is off [ 5.934337] sd 1:0:0:0: [sdb] Mode Sense: 33 00 00 08 [ 5.934834] usb 1-1.5.4.1: New USB device found, idVendor=0403, idProduct=6001 [ 5.934847] usb 1-1.5.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.934857] usb 1-1.5.4.1: Product: Smartreader2 plus [ 5.934866] usb 1-1.5.4.1: Manufacturer: Argolis BV [ 5.934871] sd 1:0:0:0: [sdb] No Caching mode page found [ 5.934876] usb 1-1.5.4.1: SerialNumber: [ 5.934882] sd 1:0:0:0: [sdb] Assuming drive cache: write through [ 6.186571] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 > [ 6.201743] sd 1:0:0:0: [sdb] Attached SCSI disk [ 6.219827] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 6.317411] sda: sda1 [ 6.325502] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.679033] EXT4-fs (mmcblk0p4): re-mounted. Opts: user_xattr [ 6.824221] systemd-journald[138]: Received request to flush runtime journal from PID 1 [ 8.511754] usbcore: registered new interface driver usbserial [ 8.521881] usbcore: registered new interface driver usbserial_generic [ 8.531477] usbserial: USB Serial support registered for generic [ 8.562811] usbcore: registered new interface driver ftdi_sio [ 8.571707] usbserial: USB Serial support registered for FTDI USB Serial Device [ 8.583448] ftdi_sio 1-1.5.4.1:1.0: FTDI USB Serial Device converter detected [ 8.583766] usb 1-1.5.4.1: Detected FT232BM [ 8.584828] usb 1-1.5.4.1: FTDI USB Serial Device converter now attached to ttyUSB0 [ 8.673334] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 8.796570] media: Linux media interface: v0.10 [ 8.857410] Linux video capture interface: v2.00 [ 8.981819] em28xx: New device PCTV Systems PCTV 290e @ 480 Mbps (2013:024f, interface 0, class 0) [ 8.996821] em28xx: DVB interface 0 found: isoc [ 9.005996] em28xx: chip ID is em28174 [ 9.106210] random: crng init done [ 9.410324] em28174 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x11372abd [ 9.420381] em28174 #0: EEPROM info: [ 9.427132] em28174 #0: microcode start address = 0x0004, boot configuration = 0x01 [ 9.480561] em28174 #0: No audio on board. [ 9.487922] em28174 #0: 500mA max power [ 9.494975] em28174 #0: Table at offset 0x39, strings=0x1aa0, 0x14ba, 0x1ace [ 9.505674] em28174 #0: Identified as PCTV nanoStick T2 290e (card=78) [ 9.515308] em28174 #0: dvb set to isoc mode. [ 9.523447] em28xx: New device PCTV PCTV 292e @ 480 Mbps (2013:025f, interface 0, class 0) [ 9.538395] em28xx: DVB interface 0 found: isoc [ 9.547612] em28xx: chip ID is em28178 [ 9.563613] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 10.043826] Adding 1023996k swap on /BACKUP_NEW/swapfile. Priority:-1 extents:5 across:1056764k FS [ 10.209300] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 11.680115] em28178 #1: EEPROM ID = 26 00 01 00, EEPROM hash = 0x1f10fa04 [ 11.690141] em28178 #1: EEPROM info: [ 11.696740] em28178 #1: microcode start address = 0x0004, boot configuration = 0x01 [ 11.723094] em28178 #1: AC97 audio (5 sample rates) [ 11.731286] em28178 #1: 500mA max power [ 11.738169] em28178 #1: Table at offset 0x27, strings=0x146a, 0x1888, 0x0a7e [ 11.749584] em28178 #1: Identified as PCTV tripleStick (292e) (card=94) [ 11.759353] em28178 #1: dvb set to isoc mode. [ 11.767843] usbcore: registered new interface driver em28xx [ 11.784385] em28174 #0: Binding DVB extension [ 11.815741] cxd2820r 4-006c: Sony CXD2820R successfully identified [ 11.847068] tda18271 4-0060: creating new instance [ 11.867720] tda18271: TDA18271HD/C2 detected @ 4-0060 [ 12.396336] DVB: registering new adapter (em28174 #0) [ 12.404560] usb 1-1.3.2: DVB: registering adapter 0 frontend 0 (Sony CXD2820R)... [ 12.427433] em28174 #0: DVB extension successfully initialized [ 12.427443] em28178 #1: Binding DVB extension [ 12.474699] i2c i2c-6: Added multiplexed i2c bus 7 [ 12.482854] si2168 6-0064: Silicon Labs Si2168-B40 successfully identified [ 12.493010] si2168 6-0064: firmware version: B 4.0.2 [ 12.512564] si2157 7-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 12.526616] DVB: registering new adapter (em28178 #1) [ 12.537074] usb 1-1.3.3: DVB: registering adapter 1 frontend 0 (Silicon Labs Si2168)... [ 12.556576] em28178 #1: DVB extension successfully initialized [ 12.556587] em28xx: Registered (Em28xx dvb Extension) extension [ 12.583485] em28174 #0: Registering input extension [ 12.640342] Registered IR keymap rc-pinnacle-pctv-hd [ 12.649428] input: em28xx IR (em28174 #0) as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3.2/rc/rc0/input0 [ 12.667427] rc rc0: em28xx IR (em28174 #0) as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3.2/rc/rc0 [ 12.685349] em28174 #0: Input extension successfully initalized [ 12.695057] em28178 #1: Registering input extension [ 12.704627] Registered IR keymap rc-pinnacle-pctv-hd [ 12.713933] input: em28xx IR (em28178 #1) as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3.3/rc/rc1/input1 [ 12.732445] rc rc1: em28xx IR (em28178 #1) as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3.3/rc/rc1 [ 12.750241] em28178 #1: Input extension successfully initalized [ 12.759876] em28xx: Registered (Em28xx Input Extension) extension [ 13.187970] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) [ 13.398333] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 13.414102] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) [ 13.806487] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null) [ 15.009973] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 15.169479] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready [ 15.183831] IPv6: ADDRCONF(NETDEV_UP): veth-osc: link is not ready [ 15.186861] br0: port 1(veth-osc-br) entered blocking state [ 15.186870] br0: port 1(veth-osc-br) entered disabled state [ 15.187422] device veth-osc-br entered promiscuous mode [ 15.190452] IPv6: ADDRCONF(NETDEV_UP): veth-tvh: link is not ready [ 15.193565] br0: port 2(veth-tvh-br) entered blocking state [ 15.193574] br0: port 2(veth-tvh-br) entered disabled state [ 15.194180] device veth-tvh-br entered promiscuous mode [ 15.200393] br0: port 3(eth0) entered blocking state [ 15.200401] br0: port 3(eth0) entered disabled state [ 15.200935] device eth0 entered promiscuous mode [ 15.211429] br0: port 1(veth-osc-br) entered blocking state [ 15.211441] br0: port 1(veth-osc-br) entered forwarding state [ 15.211767] IPv6: ADDRCONF(NETDEV_CHANGE): veth-osc: link becomes ready [ 15.211963] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [ 15.218652] br0: port 2(veth-tvh-br) entered blocking state [ 15.218661] br0: port 2(veth-tvh-br) entered forwarding state [ 15.218792] IPv6: ADDRCONF(NETDEV_CHANGE): veth-tvh: link becomes ready [ 15.314989] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 15.316200] br0: port 3(eth0) entered blocking state [ 15.316210] br0: port 3(eth0) entered forwarding state [ 15.960891] br0: port 3(eth0) entered disabled state [ 16.975814] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 16.989079] br0: port 3(eth0) entered blocking state [ 16.997529] br0: port 3(eth0) entered forwarding state [ 17.275597] IPv6: ADDRCONF(NETDEV_UP): vb-openhab: link is not ready [ 17.285465] br0: port 4(vb-openhab) entered blocking state [ 17.294398] br0: port 4(vb-openhab) entered disabled state [ 17.295134] device vb-openhab entered promiscuous mode [ 17.295310] br0: port 4(vb-openhab) entered blocking state [ 17.295319] br0: port 4(vb-openhab) entered forwarding state [ 18.020513] br0: port 4(vb-openhab) entered disabled state [ 18.204590] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 18.416808] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 18.420697] NFSD: starting 90-second grace period (net 80c64dc0) [ 18.455311] IPv6: ADDRCONF(NETDEV_UP): vb-revproxy: link is not ready [ 18.455338] br0: port 5(vb-revproxy) entered blocking state [ 18.455345] br0: port 5(vb-revproxy) entered disabled state [ 18.455929] device vb-revproxy entered promiscuous mode [ 18.456071] br0: port 5(vb-revproxy) entered blocking state [ 18.456081] br0: port 5(vb-revproxy) entered forwarding state [ 19.030520] br0: port 5(vb-revproxy) entered disabled state [ 19.553198] EXT4-fs (dm-5): mounted filesystem with writeback data mode. Opts: data=writeback [ 19.655207] IPv6: ADDRCONF(NETDEV_UP): vb-tvhead: link is not ready [ 19.665324] br0: port 6(vb-tvhead) entered blocking state [ 19.674387] br0: port 6(vb-tvhead) entered disabled state [ 19.686708] device vb-tvhead entered promiscuous mode [ 19.686861] br0: port 6(vb-tvhead) entered blocking state [ 19.686874] br0: port 6(vb-tvhead) entered forwarding state [ 19.825667] IPv6: ADDRCONF(NETDEV_UP): vb-work: link is not ready [ 19.835273] br0: port 7(vb-work) entered blocking state [ 19.843617] br0: port 7(vb-work) entered disabled state [ 19.844333] device vb-work entered promiscuous mode [ 19.844502] br0: port 7(vb-work) entered blocking state [ 19.844512] br0: port 7(vb-work) entered forwarding state [ 20.040394] br0: port 6(vb-tvhead) entered disabled state [ 20.046618] br0: port 7(vb-work) entered disabled state [ 24.190529] EXT4-fs (dm-4): re-mounted. Opts: (null) [ 27.708329] EXT4-fs (dm-4): re-mounted. Opts: (null) [ 29.595250] EXT4-fs (dm-4): re-mounted. Opts: (null) [ 30.740924] EXT4-fs (dm-4): re-mounted. Opts: (null) [ 33.088012] IPv6: ADDRCONF(NETDEV_CHANGE): vb-openhab: link becomes ready [ 33.098648] br0: port 4(vb-openhab) entered blocking state [ 33.127414] br0: port 4(vb-openhab) entered forwarding state [ 43.984780] IPv6: ADDRCONF(NETDEV_CHANGE): vb-revproxy: link becomes ready [ 43.995982] br0: port 5(vb-revproxy) entered blocking state [ 44.026019] br0: port 5(vb-revproxy) entered forwarding state [ 46.086824] IPv6: ADDRCONF(NETDEV_CHANGE): vb-tvhead: link becomes ready [ 46.098013] br0: port 6(vb-tvhead) entered blocking state [ 46.130794] br0: port 6(vb-tvhead) entered forwarding state [ 49.761720] IPv6: ADDRCONF(NETDEV_CHANGE): vb-work: link becomes ready [ 49.772108] br0: port 7(vb-work) entered blocking state [ 49.800886] br0: port 7(vb-work) entered forwarding state [ 52.136507] si2168 6-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 52.547781] si2168 6-0064: firmware version: B 4.0.11 [ 52.567313] si2157 7-0060: found a 'Silicon Labs Si2157-A30' [ 52.627549] si2157 7-0060: firmware version: 3.0.5 [ 52.637171] usb 1-1.3.3: DVB: adapter 1 frontend 0 frequency 0 out of range (42000000..870000000) [ 53.195092] tda18271: performing RF tracking filter calibration [ 57.832015] tda18271: RF tracking filter calibration complete [ 57.844356] usb 1-1.3.2: DVB: adapter 0 frontend 0 frequency 0 out of range (45000000..864000000)