From 3a0a529971ec4e2d933e9c7798db101dfb6b1aec Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Thu, 9 Nov 2017 10:49:58 -0800 Subject: [PATCH] block, scsi: Make SCSI quiesce and resume work reliably The contexts from which a SCSI device can be quiesced or resumed are: * Writing into /sys/class/scsi_device/*/device/state. * SCSI parallel (SPI) domain validation. * The SCSI device power management methods. See also scsi_bus_pm_ops. It is essential during suspend and resume that neither the filesystem state nor the filesystem metadata in RAM changes. This is why while the hibernation image is being written or restored that SCSI devices are quiesced. The SCSI core quiesces devices through scsi_device_quiesce() and scsi_device_resume(). In the SDEV_QUIESCE state execution of non-preempt requests is deferred. This is realized by returning BLKPREP_DEFER from inside scsi_prep_state_check() for quiesced SCSI devices. Avoid that a full queue prevents power management requests to be submitted by deferring allocation of non-preempt requests for devices in the quiesced state. This patch has been tested by running the following commands and by verifying that after each resume the fio job was still running: for ((i=0; i<10; i++)); do ( cd /sys/block/md0/md && while true; do [ "$( sync_action sleep 1 done ) & pids=($!) for d in /sys/class/block/sd*[a-z]; do bdev=${d#/sys/class/block/} hcil=$(readlink "$d/device") hcil=${hcil#../../../} echo 4 > "$d/queue/nr_requests" echo 1 > "/sys/class/scsi_device/$hcil/device/queue_depth" fio --name="$bdev" --filename="/dev/$bdev" --buffered=0 --bs=512 \ --rw=randread --ioengine=libaio --numjobs=4 --iodepth=16 \ --iodepth_batch=1 --thread --loops=$((2**31)) & pids+=($!) done sleep 1 echo "$(date) Hibernating ..." >>hibernate-test-log.txt systemctl hibernate sleep 10 kill "${pids[@]}" echo idle > /sys/block/md0/md/sync_action wait echo "$(date) Done." >>hibernate-test-log.txt done Reported-by: Oleksandr Natalenko References: "I/O hangs after resuming from suspend-to-ram" (https://marc.info/?l=linux-block&m=150340235201348). Signed-off-by: Bart Van Assche Reviewed-by: Hannes Reinecke Tested-by: Martin Steigerwald Tested-by: Oleksandr Natalenko Cc: Martin K. Petersen Cc: Ming Lei Cc: Christoph Hellwig Cc: Johannes Thumshirn Signed-off-by: Jens Axboe --- block/blk-core.c | 42 ++++++++++++++++++++++++++++++-------- block/blk-mq.c | 4 ++-- drivers/scsi/scsi_lib.c | 42 +++++++++++++++++++++++++++----------- fs/block_dev.c | 4 ++-- include/linux/blkdev.h | 2 +- include/scsi/scsi_device.h | 1 + 6 files changed, 70 insertions(+), 25 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index edc27689911656..29b08428ae4597 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -374,6 +374,7 @@ void blk_clear_preempt_only(struct request_queue *q) spin_lock_irqsave(q->queue_lock, flags); queue_flag_clear(QUEUE_FLAG_PREEMPT_ONLY, q); + wake_up_all(&q->mq_freeze_wq); spin_unlock_irqrestore(q->queue_lock, flags); } EXPORT_SYMBOL_GPL(blk_clear_preempt_only); @@ -795,15 +796,38 @@ struct request_queue *blk_alloc_queue(gfp_t gfp_mask) } EXPORT_SYMBOL(blk_alloc_queue); -int blk_queue_enter(struct request_queue *q, bool nowait) +/** + * blk_queue_enter() - try to increase q->q_usage_counter + * @q: request queue pointer + * @flags: BLK_MQ_REQ_NOWAIT and/or BLK_MQ_REQ_PREEMPT + */ +int blk_queue_enter(struct request_queue *q, unsigned int flags) { + const bool preempt = flags & BLK_MQ_REQ_PREEMPT; + while (true) { + bool success = false; int ret; - if (percpu_ref_tryget_live(&q->q_usage_counter)) + rcu_read_lock_sched(); + if (percpu_ref_tryget_live(&q->q_usage_counter)) { + /* + * The code that sets the PREEMPT_ONLY flag is + * responsible for ensuring that that flag is globally + * visible before the queue is unfrozen. + */ + if (preempt || !blk_queue_preempt_only(q)) { + success = true; + } else { + percpu_ref_put(&q->q_usage_counter); + } + } + rcu_read_unlock_sched(); + + if (success) return 0; - if (nowait) + if (flags & BLK_MQ_REQ_NOWAIT) return -EBUSY; /* @@ -816,7 +840,8 @@ int blk_queue_enter(struct request_queue *q, bool nowait) smp_rmb(); ret = wait_event_interruptible(q->mq_freeze_wq, - !atomic_read(&q->mq_freeze_depth) || + (atomic_read(&q->mq_freeze_depth) == 0 && + (preempt || !blk_queue_preempt_only(q))) || blk_queue_dying(q)); if (blk_queue_dying(q)) return -ENODEV; @@ -1445,8 +1470,7 @@ static struct request *blk_old_get_request(struct request_queue *q, /* create ioc upfront */ create_io_context(gfp_mask, q->node); - ret = blk_queue_enter(q, !(gfp_mask & __GFP_DIRECT_RECLAIM) || - (op & REQ_NOWAIT)); + ret = blk_queue_enter(q, flags); if (ret) return ERR_PTR(ret); spin_lock_irq(q->queue_lock); @@ -2267,8 +2291,10 @@ blk_qc_t generic_make_request(struct bio *bio) current->bio_list = bio_list_on_stack; do { struct request_queue *q = bio->bi_disk->queue; + unsigned int flags = bio->bi_opf & REQ_NOWAIT ? + BLK_MQ_REQ_NOWAIT : 0; - if (likely(blk_queue_enter(q, bio->bi_opf & REQ_NOWAIT) == 0)) { + if (likely(blk_queue_enter(q, flags) == 0)) { struct bio_list lower, same; /* Create a fresh bio_list for all subordinate requests */ @@ -2327,7 +2353,7 @@ blk_qc_t direct_make_request(struct bio *bio) if (!generic_make_request_checks(bio)) return BLK_QC_T_NONE; - if (unlikely(blk_queue_enter(q, nowait))) { + if (unlikely(blk_queue_enter(q, nowait ? BLK_MQ_REQ_NOWAIT : 0))) { if (nowait && !blk_queue_dying(q)) bio->bi_status = BLK_STS_AGAIN; else diff --git a/block/blk-mq.c b/block/blk-mq.c index e21876778cecd0..211bc8a3e2cc48 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -389,7 +389,7 @@ struct request *blk_mq_alloc_request(struct request_queue *q, unsigned int op, struct request *rq; int ret; - ret = blk_queue_enter(q, flags & BLK_MQ_REQ_NOWAIT); + ret = blk_queue_enter(q, flags); if (ret) return ERR_PTR(ret); @@ -428,7 +428,7 @@ struct request *blk_mq_alloc_request_hctx(struct request_queue *q, if (hctx_idx >= q->nr_hw_queues) return ERR_PTR(-EIO); - ret = blk_queue_enter(q, true); + ret = blk_queue_enter(q, flags); if (ret) return ERR_PTR(ret); diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index eb129dfc2ebef6..f907e2f8c1ddb8 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -2947,21 +2947,37 @@ static void scsi_wait_for_queuecommand(struct scsi_device *sdev) int scsi_device_quiesce(struct scsi_device *sdev) { + struct request_queue *q = sdev->request_queue; int err; + /* + * It is allowed to call scsi_device_quiesce() multiple times from + * the same context but concurrent scsi_device_quiesce() calls are + * not allowed. + */ + WARN_ON_ONCE(sdev->quiesced_by && sdev->quiesced_by != current); + + blk_set_preempt_only(q); + + blk_mq_freeze_queue(q); + /* + * Ensure that the effect of blk_set_preempt_only() will be visible + * for percpu_ref_tryget() callers that occur after the queue + * unfreeze even if the queue was already frozen before this function + * was called. See also https://lwn.net/Articles/573497/. + */ + synchronize_rcu(); + blk_mq_unfreeze_queue(q); + mutex_lock(&sdev->state_mutex); err = scsi_device_set_state(sdev, SDEV_QUIESCE); + if (err == 0) + sdev->quiesced_by = current; + else + blk_clear_preempt_only(q); mutex_unlock(&sdev->state_mutex); - if (err) - return err; - - scsi_run_queue(sdev->request_queue); - while (atomic_read(&sdev->device_busy)) { - msleep_interruptible(200); - scsi_run_queue(sdev->request_queue); - } - return 0; + return err; } EXPORT_SYMBOL(scsi_device_quiesce); @@ -2981,9 +2997,11 @@ void scsi_device_resume(struct scsi_device *sdev) * device deleted during suspend) */ mutex_lock(&sdev->state_mutex); - if (sdev->sdev_state == SDEV_QUIESCE && - scsi_device_set_state(sdev, SDEV_RUNNING) == 0) - scsi_run_queue(sdev->request_queue); + WARN_ON_ONCE(!sdev->quiesced_by); + sdev->quiesced_by = NULL; + blk_clear_preempt_only(sdev->request_queue); + if (sdev->sdev_state == SDEV_QUIESCE) + scsi_device_set_state(sdev, SDEV_RUNNING); mutex_unlock(&sdev->state_mutex); } EXPORT_SYMBOL(scsi_device_resume); diff --git a/fs/block_dev.c b/fs/block_dev.c index 4afa4d5ff969e9..04973f48442243 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -662,7 +662,7 @@ int bdev_read_page(struct block_device *bdev, sector_t sector, if (!ops->rw_page || bdev_get_integrity(bdev)) return result; - result = blk_queue_enter(bdev->bd_queue, false); + result = blk_queue_enter(bdev->bd_queue, 0); if (result) return result; result = ops->rw_page(bdev, sector + get_start_sect(bdev), page, false); @@ -698,7 +698,7 @@ int bdev_write_page(struct block_device *bdev, sector_t sector, if (!ops->rw_page || bdev_get_integrity(bdev)) return -EOPNOTSUPP; - result = blk_queue_enter(bdev->bd_queue, false); + result = blk_queue_enter(bdev->bd_queue, 0); if (result) return result; diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 2147e2381a22cc..402c9d536ae10e 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -959,7 +959,7 @@ extern int scsi_cmd_ioctl(struct request_queue *, struct gendisk *, fmode_t, extern int sg_scsi_ioctl(struct request_queue *, struct gendisk *, fmode_t, struct scsi_ioctl_command __user *); -extern int blk_queue_enter(struct request_queue *q, bool nowait); +extern int blk_queue_enter(struct request_queue *q, unsigned int flags); extern void blk_queue_exit(struct request_queue *q); extern void blk_start_queue(struct request_queue *q); extern void blk_start_queue_async(struct request_queue *q); diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 82e93ee94708c9..6f0f1e242e236d 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -219,6 +219,7 @@ struct scsi_device { unsigned char access_state; struct mutex state_mutex; enum scsi_device_state sdev_state; + struct task_struct *quiesced_by; unsigned long sdev_data[0]; } __attribute__((aligned(sizeof(unsigned long))));