From 750dc4cc790ab7dfc7496c5438754b12ba46637a Mon Sep 17 00:00:00 2001 From: Vyas Ramasubramani Date: Tue, 23 Jan 2024 08:58:59 -0800 Subject: [PATCH 1/2] Make finding ucx conditional (#175) This is a follow-up to #172 to make ucxx also work when it is built from source during a build (i.e. via `add_subdirectory` or FetchContent). Authors: - Vyas Ramasubramani (https://github.com/vyasr) Approvers: - Robert Maynard (https://github.com/robertmaynard) URL: https://github.com/rapidsai/ucxx/pull/175 --- cpp/CMakeLists.txt | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) diff --git a/cpp/CMakeLists.txt b/cpp/CMakeLists.txt index c6b58806..a3b40936 100644 --- a/cpp/CMakeLists.txt +++ b/cpp/CMakeLists.txt @@ -71,15 +71,20 @@ rapids_cmake_support_conda_env(conda_env MODIFY_PREFIX_PATH) # ################################################################################################## # * compiler options ------------------------------------------------------------------------------ -find_package( - ucx REQUIRED -) # Due to https://github.com/openucx/ucx/issues/9614, we cannot export the ucx # dependency because users would then have no control over whether ucx is found -# multiple times, causing potential configure errors. Therefore, we do not -# export the ucx dependency. Consumers of ucxx must find ucx themselves. Once -# the above issue is resolved (see https://github.com/openucx/ucx/pull/9622) we -# can remove the above find_package in favor of the commented out lines below. +# multiple times, causing potential configure errors. Therefore, we use a raw +# find_package call instead of rapids_find_package and skip exporting the ucx +# dependency. Consumers of ucxx must find ucx themselves. Once the above issue +# is resolved (see https://github.com/openucx/ucx/pull/9622) we can remove the +# above find_package in favor of the commented out lines below. For the same +# reason, we must also gate this find_package call behind a check for the +# target already existing so that consumers can use tools like CPM.cmake to +# either find or build ucxx from source if it cannot be found (i.e. both cases +# must allow prior finding of ucx). +if(NOT TARGET ucx::ucp) + find_package(ucx REQUIRED) +endif() #rapids_find_package( # ucx REQUIRED # BUILD_EXPORT_SET ucxx-exports From 470b8447c99bed19cc83bd1705bc3989aaf98c94 Mon Sep 17 00:00:00 2001 From: Bradley Dice Date: Wed, 24 Jan 2024 15:47:33 -0600 Subject: [PATCH 2/2] Use doxygen 1.9.1. (#177) This PR uses doxygen 1.9.1 to align with the rest of RAPIDS. This fixes an issue seen in https://github.com/rapidsai/devcontainers/pull/210#issuecomment-1905392647. Authors: - Bradley Dice (https://github.com/bdice) Approvers: - Peter Andreas Entschev (https://github.com/pentschev) - Charles Blackmon-Luca (https://github.com/charlesbluca) - Jake Awe (https://github.com/AyodeAwe) URL: https://github.com/rapidsai/ucxx/pull/177 --- ci/checks/doxygen.sh | 6 +- .../all_cuda-118_arch-x86_64.yaml | 2 +- .../all_cuda-120_arch-x86_64.yaml | 2 +- cpp/doxygen/Doxyfile | 684 ++++++------------ cpp/python/include/ucxx/python/worker.h | 7 + dependencies.yaml | 2 +- 6 files changed, 240 insertions(+), 463 deletions(-) diff --git a/ci/checks/doxygen.sh b/ci/checks/doxygen.sh index e0be7032..6efa14d4 100755 --- a/ci/checks/doxygen.sh +++ b/ci/checks/doxygen.sh @@ -13,11 +13,11 @@ fi # Utility to return version as number for comparison function version { echo "$@" | awk -F. '{ printf("%d%03d%03d%03d\n", $1,$2,$3,$4); }'; } -# doxygen supported version 1.10.0 +# doxygen supported version 1.9.1 DOXYGEN_VERSION=`doxygen --version` -if [ ! $(version "$DOXYGEN_VERSION") -eq $(version "1.10.0") ] ; then +if [ ! $(version "$DOXYGEN_VERSION") -eq $(version "1.9.1") ] ; then echo -e "warning: Unsupported doxygen version $DOXYGEN_VERSION" - echo -e "Expecting doxygen version 1.10.0" + echo -e "Expecting doxygen version 1.9.1" exit 0 fi diff --git a/conda/environments/all_cuda-118_arch-x86_64.yaml b/conda/environments/all_cuda-118_arch-x86_64.yaml index 3845292a..74d24d65 100644 --- a/conda/environments/all_cuda-118_arch-x86_64.yaml +++ b/conda/environments/all_cuda-118_arch-x86_64.yaml @@ -22,7 +22,7 @@ dependencies: - dask-cuda==24.4.* - dask-cudf==24.4.* - distributed -- doxygen=1.10.0 +- doxygen=1.9.1 - fmt>=10.1.1,<11 - gmock>=1.13.0 - gtest>=1.13.0 diff --git a/conda/environments/all_cuda-120_arch-x86_64.yaml b/conda/environments/all_cuda-120_arch-x86_64.yaml index 0fd43093..da9243f6 100644 --- a/conda/environments/all_cuda-120_arch-x86_64.yaml +++ b/conda/environments/all_cuda-120_arch-x86_64.yaml @@ -22,7 +22,7 @@ dependencies: - dask-cuda==24.4.* - dask-cudf==24.4.* - distributed -- doxygen=1.10.0 +- doxygen=1.9.1 - fmt>=10.1.1,<11 - gmock>=1.13.0 - gtest>=1.13.0 diff --git a/cpp/doxygen/Doxyfile b/cpp/doxygen/Doxyfile index d794eef2..76ce2ab6 100644 --- a/cpp/doxygen/Doxyfile +++ b/cpp/doxygen/Doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.10.0 +# Doxyfile 1.9.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -12,16 +12,6 @@ # For lists, items can also be appended using: # TAG += value [value, ...] # Values that contain spaces should be placed between quotes (\" \"). -# -# Note: -# -# Use doxygen to compare the used configuration file with the template -# configuration file: -# doxygen -x [configFile] -# Use doxygen to compare the used configuration file with the template -# configuration file without replacing the environment variables or CMake type -# replacement variables: -# doxygen -x_noenv [configFile] #--------------------------------------------------------------------------- # Project related configuration options @@ -63,12 +53,6 @@ PROJECT_BRIEF = PROJECT_LOGO = -# With the PROJECT_ICON tag one can specify an icon that is included in the tabs -# when the HTML document is shown. Doxygen will copy the logo to the output -# directory. - -PROJECT_ICON = - # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path # into which the generated documentation will be written. If a relative path is # entered, it will be relative to the location where doxygen was started. If @@ -76,28 +60,16 @@ PROJECT_ICON = OUTPUT_DIRECTORY = -# If the CREATE_SUBDIRS tag is set to YES then doxygen will create up to 4096 -# sub-directories (in 2 levels) under the output directory of each output format -# and will distribute the generated files over these directories. Enabling this +# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- +# directories (in 2 levels) under the output directory of each output format and +# will distribute the generated files over these directories. Enabling this # option can be useful when feeding doxygen a huge amount of source files, where # putting all generated files in the same directory would otherwise causes -# performance problems for the file system. Adapt CREATE_SUBDIRS_LEVEL to -# control the number of sub-directories. +# performance problems for the file system. # The default value is: NO. CREATE_SUBDIRS = NO -# Controls the number of sub-directories that will be created when -# CREATE_SUBDIRS tag is set to YES. Level 0 represents 16 directories, and every -# level increment doubles the number of directories, resulting in 4096 -# directories at level 8 which is the default and also the maximum value. The -# sub-directories are organized in 2 levels, the first level always has a fixed -# number of 16 directories. -# Minimum value: 0, maximum value: 8, default value: 8. -# This tag requires that the tag CREATE_SUBDIRS is set to YES. - -CREATE_SUBDIRS_LEVEL = 8 - # If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII # characters to appear in the names of generated files. If set to NO, non-ASCII # characters will be escaped, for example _xE3_x81_x84 will be used for Unicode @@ -109,18 +81,26 @@ ALLOW_UNICODE_NAMES = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Bulgarian, -# Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, English -# (United States), Esperanto, Farsi (Persian), Finnish, French, German, Greek, -# Hindi, Hungarian, Indonesian, Italian, Japanese, Japanese-en (Japanese with -# English messages), Korean, Korean-en (Korean with English messages), Latvian, -# Lithuanian, Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, -# Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, -# Swedish, Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -278,16 +258,16 @@ TAB_SIZE = 4 # the documentation. An alias has the form: # name=value # For example adding -# "sideeffect=@par Side Effects:^^" +# "sideeffect=@par Side Effects:\n" # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading -# "Side Effects:". Note that you cannot put \n's in the value part of an alias -# to insert newlines (in the resulting output). You can put ^^ in the value part -# of an alias to insert a newline as if a physical newline was in the original -# file. When you need a literal { or } or , in the value part of an alias you -# have to escape them by means of a backslash (\), this can lead to conflicts -# with the commands \{ and \} for these it is advised to use the version @{ and -# @} or use a double escape (\\{ and \\}) +# "Side Effects:". You can put \n's in the value part of an alias to insert +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -332,8 +312,8 @@ OPTIMIZE_OUTPUT_SLICE = NO # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, JavaScript, -# Csharp (C#), C, C++, Lex, D, PHP, md (Markdown), Objective-C, Python, Slice, -# VHDL, Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, VHDL, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: # FortranFree, unknown formatted Fortran: Fortran. In the later case the parser # tries to guess whether the code is fixed or free formatted code, this is the # default for Fortran type files). For instance to make doxygen treat .inc files @@ -369,17 +349,6 @@ MARKDOWN_SUPPORT = YES TOC_INCLUDE_HEADINGS = 5 -# The MARKDOWN_ID_STYLE tag can be used to specify the algorithm used to -# generate identifiers for the Markdown headings. Note: Every identifier is -# unique. -# Possible values are: DOXYGEN use a fixed 'autotoc_md' string followed by a -# sequence number starting at 0 and GITHUB use the lower case version of title -# with any whitespace replaced by '-' and punctuation characters removed. -# The default value is: DOXYGEN. -# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. - -MARKDOWN_ID_STYLE = DOXYGEN - # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -491,27 +460,19 @@ TYPEDEF_HIDES_STRUCT = NO LOOKUP_CACHE_SIZE = 0 -# The NUM_PROC_THREADS specifies the number of threads doxygen is allowed to use +# The NUM_PROC_THREADS specifies the number threads doxygen is allowed to use # during processing. When set to 0 doxygen will based this on the number of # cores available in the system. You can set it explicitly to a value larger # than 0 to get more control over the balance between CPU load and processing # speed. At this moment only the input processing can be done using multiple # threads. Since this is still an experimental feature the default is set to 1, -# which effectively disables parallel processing. Please report any issues you +# which efficively disables parallel processing. Please report any issues you # encounter. Generating dot graphs in parallel is controlled by the # DOT_NUM_THREADS setting. # Minimum value: 0, maximum value: 32, default value: 1. NUM_PROC_THREADS = 1 -# If the TIMESTAMP tag is set different from NO then each generated page will -# contain the date or date and time when the page was generated. Setting this to -# NO can help when comparing the output of multiple runs. -# Possible values are: YES, NO, DATETIME and DATE. -# The default value is: NO. - -TIMESTAMP = NO - #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- @@ -593,8 +554,7 @@ HIDE_UNDOC_MEMBERS = NO # If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all # undocumented classes that are normally visible in the class hierarchy. If set # to NO, these classes will be included in the various overviews. This option -# will also hide undocumented C++ concepts if enabled. This option has no effect -# if EXTRACT_ALL is enabled. +# has no effect if EXTRACT_ALL is enabled. # The default value is: NO. HIDE_UNDOC_CLASSES = NO @@ -625,17 +585,16 @@ INTERNAL_DOCS = NO # filesystem is case sensitive (i.e. it supports files in the same directory # whose names only differ in casing), the option must be set to YES to properly # deal with such files in case they appear in the input. For filesystems that -# are not case sensitive the option should be set to NO to properly deal with +# are not case sensitive the option should be be set to NO to properly deal with # output files written for symbols that only differ in casing, such as for two # classes, one named CLASS and the other named Class, and to also support # references to files without having to specify the exact matching casing. On # Windows (including Cygwin) and MacOS, users should typically set this option # to NO, whereas on Linux or other Unix flavors it should typically be set to # YES. -# Possible values are: SYSTEM, NO and YES. -# The default value is: SYSTEM. +# The default value is: system dependent. -CASE_SENSE_NAMES = SYSTEM +CASE_SENSE_NAMES = YES # If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with # their full class and namespace scopes in the documentation. If set to YES, the @@ -651,12 +610,6 @@ HIDE_SCOPE_NAMES = NO HIDE_COMPOUND_REFERENCE= NO -# If the SHOW_HEADERFILE tag is set to YES then the documentation for a class -# will show which file needs to be included to use the class. -# The default value is: YES. - -SHOW_HEADERFILE = YES - # If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of # the files that are included by a file in the documentation of that file. # The default value is: YES. @@ -814,8 +767,7 @@ FILE_VERSION_FILTER = # output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. You can # optionally specify a file name after the option, if omitted DoxygenLayout.xml -# will be used as the name of the layout file. See also section "Changing the -# layout of pages" for information. +# will be used as the name of the layout file. # # Note that if you run doxygen from a directory containing a file called # DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE @@ -861,50 +813,27 @@ WARNINGS = YES WARN_IF_UNDOCUMENTED = YES # If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as documenting some parameters in -# a documented function twice, or documenting parameters that don't exist or -# using markup commands wrongly. +# potential errors in the documentation, such as not documenting some parameters +# in a documented function, or documenting parameters that don't exist or using +# markup commands wrongly. # The default value is: YES. WARN_IF_DOC_ERROR = YES -# If WARN_IF_INCOMPLETE_DOC is set to YES, doxygen will warn about incomplete -# function parameter documentation. If set to NO, doxygen will accept that some -# parameters have no documentation without warning. -# The default value is: YES. - -WARN_IF_INCOMPLETE_DOC = YES - # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return -# value. If set to NO, doxygen will only warn about wrong parameter -# documentation, but not about the absence of documentation. If EXTRACT_ALL is -# set to YES then this flag will automatically be disabled. See also -# WARN_IF_INCOMPLETE_DOC +# value. If set to NO, doxygen will only warn about wrong or incomplete +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = NO -# If WARN_IF_UNDOC_ENUM_VAL option is set to YES, doxygen will warn about -# undocumented enumeration values. If set to NO, doxygen will accept -# undocumented enumeration values. If EXTRACT_ALL is set to YES then this flag -# will automatically be disabled. -# The default value is: NO. - -WARN_IF_UNDOC_ENUM_VAL = NO - # If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when # a warning is encountered. If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS # then doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but # at the end of the doxygen process doxygen will return with a non-zero status. -# If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS_PRINT then doxygen behaves -# like FAIL_ON_WARNINGS but in case no WARN_LOGFILE is defined doxygen will not -# write the warning messages in between other messages but write them at the end -# of a run, in case a WARN_LOGFILE is defined the warning messages will be -# besides being in the defined file also be shown at the end of a run, unless -# the WARN_LOGFILE is defined as - i.e. standard output (stdout) in that case -# the behavior will remain as with the setting FAIL_ON_WARNINGS. -# Possible values are: NO, YES, FAIL_ON_WARNINGS and FAIL_ON_WARNINGS_PRINT. +# Possible values are: NO, YES and FAIL_ON_WARNINGS. # The default value is: NO. WARN_AS_ERROR = NO @@ -915,27 +844,13 @@ WARN_AS_ERROR = NO # and the warning text. Optionally the format may contain $version, which will # be replaced by the version of the file (if it could be obtained via # FILE_VERSION_FILTER) -# See also: WARN_LINE_FORMAT # The default value is: $file:$line: $text. WARN_FORMAT = "$file:$line: $text" -# In the $text part of the WARN_FORMAT command it is possible that a reference -# to a more specific place is given. To make it easier to jump to this place -# (outside of doxygen) the user can define a custom "cut" / "paste" string. -# Example: -# WARN_LINE_FORMAT = "'vi $file +$line'" -# See also: WARN_FORMAT -# The default value is: at line $line of file $file. - -WARN_LINE_FORMAT = "at line $line of file $file" - # The WARN_LOGFILE tag can be used to specify a file to which warning and error # messages should be written. If left blank the output is written to standard -# error (stderr). In case the file specified cannot be opened for writing the -# warning and error messages are written to standard error. When as file - is -# specified the warning and error messages are written to standard output -# (stdout). +# error (stderr). WARN_LOGFILE = @@ -957,21 +872,10 @@ INPUT = ../include \ # libiconv (or the iconv built into libc) for the transcoding. See the libiconv # documentation (see: # https://www.gnu.org/software/libiconv/) for the list of possible encodings. -# See also: INPUT_FILE_ENCODING # The default value is: UTF-8. INPUT_ENCODING = UTF-8 -# This tag can be used to specify the character encoding of the source files -# that doxygen parses The INPUT_FILE_ENCODING tag can be used to specify -# character encoding on a per file pattern basis. Doxygen will compare the file -# name with each pattern and apply the encoding instead of the default -# INPUT_ENCODING) if there is a match. The character encodings are a list of the -# form: pattern=encoding (like *.php=ISO-8859-1). See cfg_input_encoding -# "INPUT_ENCODING" for further information on supported encodings. - -INPUT_FILE_ENCODING = - # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and # *.h) to filter out the source-files in the directories. @@ -983,17 +887,17 @@ INPUT_FILE_ENCODING = # Note the list of default checked file patterns might differ from the list of # default file extension mappings. # -# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cxxm, -# *.cpp, *.cppm, *.ccm, *.c++, *.c++m, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, -# *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, *.h++, *.ixx, *.l, *.cs, *.d, -# *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, *.md, *.mm, *.dox (to -# be provided as doxygen C comment), *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, -# *.f18, *.f, *.for, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox (to be provided as doxygen C comment), +# *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, *.f18, *.f, *.for, *.vhd, *.vhdl, +# *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.c \ *.cpp \ *.h \ - *.hpp \ + *.hpp # The RECURSIVE tag can be used to specify whether or not subdirectories should # be searched for input files as well. @@ -1030,7 +934,10 @@ EXCLUDE_PATTERNS = */tests/* # (namespaces, classes, functions, etc.) that should be excluded from the # output. The symbol name can be a fully qualified name, a word, or if the # wildcard * is used, a substring. Examples: ANamespace, AClass, -# ANamespace::AClass, ANamespace::*Test +# AClass::ANamespace, ANamespace::*Test +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories use the pattern */test/* EXCLUDE_SYMBOLS = @@ -1075,11 +982,6 @@ IMAGE_PATH = # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. # -# Note that doxygen will use the data processed and written to standard output -# for further processing, therefore nothing else, like debug statements or used -# commands (so in case of a Windows batch file always use @echo OFF), should be -# written to standard output. -# # Note that for custom extensions or not directly supported extensions you also # need to set EXTENSION_MAPPING for the extension otherwise the files are not # properly processed by doxygen. @@ -1121,15 +1023,6 @@ FILTER_SOURCE_PATTERNS = USE_MDFILE_AS_MAINPAGE = -# The Fortran standard specifies that for fixed formatted Fortran code all -# characters from position 72 are to be considered as comment. A common -# extension is to allow longer lines before the automatic comment starts. The -# setting FORTRAN_COMMENT_AFTER will also make it possible that longer lines can -# be processed before the automatic comment starts. -# Minimum value: 7, maximum value: 10000, default value: 72. - -FORTRAN_COMMENT_AFTER = 72 - #--------------------------------------------------------------------------- # Configuration options related to source browsing #--------------------------------------------------------------------------- @@ -1144,8 +1037,7 @@ FORTRAN_COMMENT_AFTER = 72 SOURCE_BROWSER = NO # Setting the INLINE_SOURCES tag to YES will include the body of functions, -# multi-line macros, enums or list initialized variables directly into the -# documentation. +# classes and enums directly into the documentation. # The default value is: NO. INLINE_SOURCES = NO @@ -1228,11 +1120,10 @@ VERBATIM_HEADERS = YES ALPHABETICAL_INDEX = YES -# The IGNORE_PREFIX tag can be used to specify a prefix (or a list of prefixes) -# that should be ignored while generating the index headers. The IGNORE_PREFIX -# tag works for classes, function and member names. The entity will be placed in -# the alphabetical list under the first letter of the entity name that remains -# after removing the prefix. +# In case all classes in a project start with a common prefix, all classes will +# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag +# can be used to specify a prefix (or a list of prefixes) that should be ignored +# while generating the index headers. # This tag requires that the tag ALPHABETICAL_INDEX is set to YES. IGNORE_PREFIX = @@ -1311,12 +1202,7 @@ HTML_STYLESHEET = # Doxygen will copy the style sheet files to the output directory. # Note: The order of the extra style sheet files is of importance (e.g. the last # style sheet in the list overrules the setting of the previous ones in the -# list). -# Note: Since the styling of scrollbars can currently not be overruled in -# Webkit/Chromium, the styling will be left out of the default doxygen.css if -# one or more extra stylesheets have been specified. So if scrollbar -# customization is desired it has to be added explicitly. For an example see the -# documentation. +# list). For an example see the documentation. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_EXTRA_STYLESHEET = @@ -1331,22 +1217,9 @@ HTML_EXTRA_STYLESHEET = HTML_EXTRA_FILES = -# The HTML_COLORSTYLE tag can be used to specify if the generated HTML output -# should be rendered with a dark or light theme. -# Possible values are: LIGHT always generate light mode output, DARK always -# generate dark mode output, AUTO_LIGHT automatically set the mode according to -# the user preference, use light mode if no preference is set (the default), -# AUTO_DARK automatically set the mode according to the user preference, use -# dark mode if no preference is set and TOGGLE allow to user to switch between -# light and dark mode via a button. -# The default value is: AUTO_LIGHT. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_COLORSTYLE = AUTO_LIGHT - # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to -# this color. Hue is specified as an angle on a color-wheel, see +# this color. Hue is specified as an angle on a colorwheel, see # https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. @@ -1356,7 +1229,7 @@ HTML_COLORSTYLE = AUTO_LIGHT HTML_COLORSTYLE_HUE = 220 # The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors -# in the HTML output. For a value of 0 the output will use gray-scales only. A +# in the HTML output. For a value of 0 the output will use grayscales only. A # value of 255 will produce the most vivid colors. # Minimum value: 0, maximum value: 255, default value: 100. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1374,6 +1247,15 @@ HTML_COLORSTYLE_SAT = 100 HTML_COLORSTYLE_GAMMA = 80 +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML +# page will contain the date and time when the page was generated. Setting this +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_TIMESTAMP = NO + # If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML # documentation will contain a main index with vertical navigation menus that # are dynamically created via JavaScript. If disabled, the navigation index will @@ -1393,33 +1275,6 @@ HTML_DYNAMIC_MENUS = YES HTML_DYNAMIC_SECTIONS = NO -# If the HTML_CODE_FOLDING tag is set to YES then classes and functions can be -# dynamically folded and expanded in the generated HTML source code. -# The default value is: YES. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_CODE_FOLDING = YES - -# If the HTML_COPY_CLIPBOARD tag is set to YES then doxygen will show an icon in -# the top right corner of code and text fragments that allows the user to copy -# its content to the clipboard. Note this only works if supported by the browser -# and the web page is served via a secure context (see: -# https://www.w3.org/TR/secure-contexts/), i.e. using the https: or file: -# protocol. -# The default value is: YES. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_COPY_CLIPBOARD = YES - -# Doxygen stores a couple of settings persistently in the browser (via e.g. -# cookies). By default these settings apply to all HTML pages generated by -# doxygen across all projects. The HTML_PROJECT_COOKIE tag can be used to store -# the settings under a project specific key, such that the user preferences will -# be stored separately. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_PROJECT_COOKIE = - # With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries # shown in the various tree structured indices initially; the user can expand # and collapse entries dynamically later on. Doxygen will expand the tree to @@ -1456,13 +1311,6 @@ GENERATE_DOCSET = NO DOCSET_FEEDNAME = "Doxygen generated docs" -# This tag determines the URL of the docset feed. A documentation feed provides -# an umbrella under which multiple documentation sets from a single provider -# (such as a company or product suite) can be grouped. -# This tag requires that the tag GENERATE_DOCSET is set to YES. - -DOCSET_FEEDURL = - # This tag specifies a string that should uniquely identify the documentation # set bundle. This should be a reverse domain-name style string, e.g. # com.mycompany.MyDocSet. Doxygen will append .docset to the name. @@ -1488,12 +1336,8 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# on Windows. In the beginning of 2021 Microsoft took the original page, with -# a.o. the download links, offline the HTML help workshop was already many years -# in maintenance mode). You can download the HTML help workshop from the web -# archives at Installation executable (see: -# http://web.archive.org/web/20160201063255/http://download.microsoft.com/downlo -# ad/0/A/9/0A939EF6-E31C-430F-A3DF-DFAE7960D564/htmlhelp.exe). +# (see: +# https://www.microsoft.com/en-us/download/details.aspx?id=21138) on Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output # generated by doxygen into a single compiled HTML file (.chm). Compiled HTML @@ -1550,16 +1394,6 @@ BINARY_TOC = NO TOC_EXPAND = NO -# The SITEMAP_URL tag is used to specify the full URL of the place where the -# generated documentation will be placed on the server by the user during the -# deployment of the documentation. The generated sitemap is called sitemap.xml -# and placed on the directory specified by HTML_OUTPUT. In case no SITEMAP_URL -# is specified no sitemap is generated. For information about the sitemap -# protocol see https://www.sitemaps.org -# This tag requires that the tag GENERATE_HTML is set to YES. - -SITEMAP_URL = - # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and # QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that # can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help @@ -1662,28 +1496,16 @@ DISABLE_INDEX = NO # to work a browser that supports JavaScript, DHTML, CSS and frames is required # (i.e. any modern browser). Windows users are probably better off using the # HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can -# further fine tune the look of the index (see "Fine-tuning the output"). As an -# example, the default style sheet generated by doxygen has an example that -# shows how to put an image at the root of the tree instead of the PROJECT_NAME. -# Since the tree basically has the same information as the tab index, you could -# consider setting DISABLE_INDEX to YES when enabling this option. +# further fine-tune the look of the index. As an example, the default style +# sheet generated by doxygen has an example that shows how to put an image at +# the root of the tree instead of the PROJECT_NAME. Since the tree basically has +# the same information as the tab index, you could consider setting +# DISABLE_INDEX to YES when enabling this option. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. GENERATE_TREEVIEW = NO -# When both GENERATE_TREEVIEW and DISABLE_INDEX are set to YES, then the -# FULL_SIDEBAR option determines if the side bar is limited to only the treeview -# area (value NO) or if it should extend to the full height of the window (value -# YES). Setting this to YES gives a layout similar to -# https://docs.readthedocs.io with more room for contents, but less room for the -# project logo, title, and description. If either GENERATE_TREEVIEW or -# DISABLE_INDEX is set to NO, this option has no effect. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -FULL_SIDEBAR = NO - # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that # doxygen will group on one line in the generated HTML documentation. # @@ -1708,13 +1530,6 @@ TREEVIEW_WIDTH = 250 EXT_LINKS_IN_WINDOW = NO -# If the OBFUSCATE_EMAILS tag is set to YES, doxygen will obfuscate email -# addresses. -# The default value is: YES. -# This tag requires that the tag GENERATE_HTML is set to YES. - -OBFUSCATE_EMAILS = YES - # If the HTML_FORMULA_FORMAT option is set to svg, doxygen will use the pdf2svg # tool (see https://github.com/dawbarton/pdf2svg) or inkscape (see # https://inkscape.org) to generate formulas as SVG images instead of PNGs for @@ -1735,6 +1550,17 @@ HTML_FORMULA_FORMAT = png FORMULA_FONTSIZE = 10 +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images +# generated for formulas are transparent PNGs. Transparent PNGs are not +# supported properly for IE 6.0, but are supported on all modern browsers. +# +# Note that when changing this option you need to delete any form_*.png files in +# the HTML output directory before the changes have effect. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FORMULA_TRANSPARENT = YES + # The FORMULA_MACROFILE can contain LaTeX \newcommand and \renewcommand commands # to create new LaTeX commands to be used in formulas as building blocks. See # the section "Including formulas" for details. @@ -1752,29 +1578,11 @@ FORMULA_MACROFILE = USE_MATHJAX = NO -# With MATHJAX_VERSION it is possible to specify the MathJax version to be used. -# Note that the different versions of MathJax have different requirements with -# regards to the different settings, so it is possible that also other MathJax -# settings have to be changed when switching between the different MathJax -# versions. -# Possible values are: MathJax_2 and MathJax_3. -# The default value is: MathJax_2. -# This tag requires that the tag USE_MATHJAX is set to YES. - -MATHJAX_VERSION = MathJax_2 - # When MathJax is enabled you can set the default output format to be used for -# the MathJax output. For more details about the output format see MathJax -# version 2 (see: -# http://docs.mathjax.org/en/v2.7-latest/output.html) and MathJax version 3 -# (see: -# http://docs.mathjax.org/en/latest/web/components/output.html). +# the MathJax output. See the MathJax site (see: +# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details. # Possible values are: HTML-CSS (which is slower, but has the best -# compatibility. This is the name for Mathjax version 2, for MathJax version 3 -# this will be translated into chtml), NativeMML (i.e. MathML. Only supported -# for NathJax 2. For MathJax version 3 chtml will be used instead.), chtml (This -# is the name for Mathjax version 3, for MathJax version 2 this will be -# translated into HTML-CSS) and SVG. +# compatibility), NativeMML (i.e. MathML) and SVG. # The default value is: HTML-CSS. # This tag requires that the tag USE_MATHJAX is set to YES. @@ -1787,21 +1595,15 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from https://www.mathjax.org before deployment. The default value is: -# - in case of MathJax version 2: https://cdn.jsdelivr.net/npm/mathjax@2 -# - in case of MathJax version 3: https://cdn.jsdelivr.net/npm/mathjax@3 +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdn.jsdelivr.net/npm/mathjax@2. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = # The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax # extension names that should be enabled during MathJax rendering. For example -# for MathJax version 2 (see -# https://docs.mathjax.org/en/v2.7-latest/tex.html#tex-and-latex-extensions): # MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols -# For example for MathJax version 3 (see -# http://docs.mathjax.org/en/latest/input/tex/extensions/index.html): -# MATHJAX_EXTENSIONS = ams # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_EXTENSIONS = @@ -1981,31 +1783,29 @@ PAPER_TYPE = a4 EXTRA_PACKAGES = -# The LATEX_HEADER tag can be used to specify a user-defined LaTeX header for -# the generated LaTeX document. The header should contain everything until the -# first chapter. If it is left blank doxygen will generate a standard header. It -# is highly recommended to start with a default header using -# doxygen -w latex new_header.tex new_footer.tex new_stylesheet.sty -# and then modify the file new_header.tex. See also section "Doxygen usage" for -# information on how to generate the default header that doxygen normally uses. +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the +# generated LaTeX document. The header should contain everything until the first +# chapter. If it is left blank doxygen will generate a standard header. See +# section "Doxygen usage" for information on how to let doxygen write the +# default header to a separate file. # -# Note: Only use a user-defined header if you know what you are doing! -# Note: The header is subject to change so you typically have to regenerate the -# default header when upgrading to a newer version of doxygen. The following -# commands have a special meaning inside the header (and footer): For a -# description of the possible markers and block names see the documentation. +# Note: Only use a user-defined header if you know what you are doing! The +# following commands have a special meaning inside the header: $title, +# $datetime, $date, $doxygenversion, $projectname, $projectnumber, +# $projectbrief, $projectlogo. Doxygen will replace $title with the empty +# string, for the replacement values of the other commands the user is referred +# to HTML_HEADER. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_HEADER = -# The LATEX_FOOTER tag can be used to specify a user-defined LaTeX footer for -# the generated LaTeX document. The footer should contain everything after the -# last chapter. If it is left blank doxygen will generate a standard footer. See +# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the +# generated LaTeX document. The footer should contain everything after the last +# chapter. If it is left blank doxygen will generate a standard footer. See # LATEX_HEADER for more information on how to generate a default footer and what -# special commands can be used inside the footer. See also section "Doxygen -# usage" for information on how to generate the default footer that doxygen -# normally uses. Note: Only use a user-defined footer if you know what you are -# doing! +# special commands can be used inside the footer. +# +# Note: Only use a user-defined footer if you know what you are doing! # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_FOOTER = @@ -2048,16 +1848,10 @@ PDF_HYPERLINKS = YES USE_PDFLATEX = YES -# The LATEX_BATCHMODE tag signals the behavior of LaTeX in case of an error. -# Possible values are: NO same as ERROR_STOP, YES same as BATCH, BATCH In batch -# mode nothing is printed on the terminal, errors are scrolled as if is -# hit at every error; missing files that TeX tries to input or request from -# keyboard input (\read on a not open input stream) cause the job to abort, -# NON_STOP In nonstop mode the diagnostic message will appear on the terminal, -# but there is no possibility of user interaction just like in batch mode, -# SCROLL In scroll mode, TeX will stop only for missing files to input or if -# keyboard input is necessary and ERROR_STOP In errorstop mode, TeX will stop at -# each error, asking for user intervention. +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode +# command to the generated LaTeX files. This will instruct LaTeX to keep running +# if errors occur, instead of asking the user for help. This option is also used +# when generating formulas in HTML. # The default value is: NO. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -2070,6 +1864,16 @@ LATEX_BATCHMODE = NO LATEX_HIDE_INDICES = NO +# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source +# code with syntax highlighting in the LaTeX output. +# +# Note that which sources are shown also depends on other settings such as +# SOURCE_BROWSER. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_SOURCE_CODE = NO + # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See # https://en.wikipedia.org/wiki/BibTeX and \cite for more info. @@ -2078,6 +1882,14 @@ LATEX_HIDE_INDICES = NO LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + # The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) # path from which the emoji images will be read. If a relative path is entered, # it will be relative to the LATEX_OUTPUT directory. If left blank the @@ -2142,6 +1954,16 @@ RTF_STYLESHEET_FILE = RTF_EXTENSIONS_FILE = +# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code +# with syntax highlighting in the RTF output. +# +# Note that which sources are shown also depends on other settings such as +# SOURCE_BROWSER. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_SOURCE_CODE = NO + #--------------------------------------------------------------------------- # Configuration options related to the man page output #--------------------------------------------------------------------------- @@ -2238,44 +2060,27 @@ GENERATE_DOCBOOK = NO DOCBOOK_OUTPUT = docbook +# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the +# program listings (including syntax highlighting and cross-referencing +# information) to the DOCBOOK output. Note that enabling this will significantly +# increase the size of the DOCBOOK output. +# The default value is: NO. +# This tag requires that the tag GENERATE_DOCBOOK is set to YES. + +DOCBOOK_PROGRAMLISTING = NO + #--------------------------------------------------------------------------- # Configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see https://autogen.sourceforge.net/) file that captures +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures # the structure of the code including all documentation. Note that this feature # is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO -#--------------------------------------------------------------------------- -# Configuration options related to Sqlite3 output -#--------------------------------------------------------------------------- - -# If the GENERATE_SQLITE3 tag is set to YES doxygen will generate a Sqlite3 -# database with symbols found by doxygen stored in tables. -# The default value is: NO. - -GENERATE_SQLITE3 = NO - -# The SQLITE3_OUTPUT tag is used to specify where the Sqlite3 database will be -# put. If a relative path is entered the value of OUTPUT_DIRECTORY will be put -# in front of it. -# The default directory is: sqlite3. -# This tag requires that the tag GENERATE_SQLITE3 is set to YES. - -SQLITE3_OUTPUT = sqlite3 - -# The SQLITE3_RECREATE_DB tag is set to YES, the existing doxygen_sqlite3.db -# database file will be recreated with each doxygen run. If set to NO, doxygen -# will warn if a database file is already found and not modify it. -# The default value is: YES. -# This tag requires that the tag GENERATE_SQLITE3 is set to YES. - -SQLITE3_RECREATE_DB = YES - #--------------------------------------------------------------------------- # Configuration options related to the Perl module output #--------------------------------------------------------------------------- @@ -2350,8 +2155,7 @@ SEARCH_INCLUDES = YES # The INCLUDE_PATH tag can be used to specify one or more directories that # contain include files that are not input files but should be processed by the -# preprocessor. Note that the INCLUDE_PATH is not recursive, so the setting of -# RECURSIVE has no effect here. +# preprocessor. # This tag requires that the tag SEARCH_INCLUDES is set to YES. INCLUDE_PATH = @@ -2418,15 +2222,15 @@ TAGFILES = GENERATE_TAGFILE = -# If the ALLEXTERNALS tag is set to YES, all external classes and namespaces -# will be listed in the class and namespace index. If set to NO, only the -# inherited external classes will be listed. +# If the ALLEXTERNALS tag is set to YES, all external class will be listed in +# the class index. If set to NO, only the inherited external classes will be +# listed. # The default value is: NO. ALLEXTERNALS = NO # If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed -# in the topic index. If set to NO, only the current project's groups will be +# in the modules index. If set to NO, only the current project's groups will be # listed. # The default value is: YES. @@ -2440,9 +2244,25 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES #--------------------------------------------------------------------------- -# Configuration options related to diagram generator tools +# Configuration options related to the dot tool #--------------------------------------------------------------------------- +# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram +# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to +# NO turns the diagrams off. Note that this option also works with HAVE_DOT +# disabled, but it is recommended to install and use dot, since it yields more +# powerful graphs. +# The default value is: YES. + +CLASS_DIAGRAMS = YES + +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2451,7 +2271,7 @@ HIDE_UNDOC_RELATIONS = YES # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is # available from the path. This tool is part of Graphviz (see: -# https://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent +# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent # Bell Labs. The other options in this section have no effect if this option is # set to NO # The default value is: NO. @@ -2468,77 +2288,49 @@ HAVE_DOT = NO DOT_NUM_THREADS = 0 -# DOT_COMMON_ATTR is common attributes for nodes, edges and labels of -# subgraphs. When you want a differently looking font in the dot files that -# doxygen generates you can specify fontname, fontcolor and fontsize attributes. -# For details please see Node, -# Edge and Graph Attributes specification You need to make sure dot is able -# to find the font, which can be done by putting it in a standard location or by -# setting the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the -# directory containing the font. Default graphviz fontsize is 14. -# The default value is: fontname=Helvetica,fontsize=10. -# This tag requires that the tag HAVE_DOT is set to YES. - -DOT_COMMON_ATTR = "fontname=Helvetica,fontsize=10" - -# DOT_EDGE_ATTR is concatenated with DOT_COMMON_ATTR. For elegant style you can -# add 'arrowhead=open, arrowtail=open, arrowsize=0.5'. Complete documentation about -# arrows shapes. -# The default value is: labelfontname=Helvetica,labelfontsize=10. +# When you want a differently looking font in the dot files that doxygen +# generates you can specify the font name using DOT_FONTNAME. You need to make +# sure dot is able to find the font, which can be done by putting it in a +# standard location or by setting the DOTFONTPATH environment variable or by +# setting DOT_FONTPATH to the directory containing the font. +# The default value is: Helvetica. # This tag requires that the tag HAVE_DOT is set to YES. -DOT_EDGE_ATTR = "labelfontname=Helvetica,labelfontsize=10" +DOT_FONTNAME = Helvetica -# DOT_NODE_ATTR is concatenated with DOT_COMMON_ATTR. For view without boxes -# around nodes set 'shape=plain' or 'shape=plaintext' Shapes specification -# The default value is: shape=box,height=0.2,width=0.4. +# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of +# dot graphs. +# Minimum value: 4, maximum value: 24, default value: 10. # This tag requires that the tag HAVE_DOT is set to YES. -DOT_NODE_ATTR = "shape=box,height=0.2,width=0.4" +DOT_FONTSIZE = 10 -# You can set the path where dot can find font specified with fontname in -# DOT_COMMON_ATTR and others dot attributes. +# By default doxygen will tell dot to use the default font as specified with +# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set +# the path where dot can find it using this tag. # This tag requires that the tag HAVE_DOT is set to YES. DOT_FONTPATH = -# If the CLASS_GRAPH tag is set to YES or GRAPH or BUILTIN then doxygen will -# generate a graph for each documented class showing the direct and indirect -# inheritance relations. In case the CLASS_GRAPH tag is set to YES or GRAPH and -# HAVE_DOT is enabled as well, then dot will be used to draw the graph. In case -# the CLASS_GRAPH tag is set to YES and HAVE_DOT is disabled or if the -# CLASS_GRAPH tag is set to BUILTIN, then the built-in generator will be used. -# If the CLASS_GRAPH tag is set to TEXT the direct and indirect inheritance -# relations will be shown as texts / links. Explicit enabling an inheritance -# graph or choosing a different representation for an inheritance graph of a -# specific class, can be accomplished by means of the command \inheritancegraph. -# Disabling an inheritance graph can be accomplished by means of the command -# \hideinheritancegraph. -# Possible values are: NO, YES, TEXT, GRAPH and BUILTIN. +# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for +# each documented class showing the direct and indirect inheritance relations. +# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO. # The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. CLASS_GRAPH = YES # If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a # graph for each documented class showing the direct and indirect implementation # dependencies (inheritance, containment, and class references variables) of the -# class with other documented classes. Explicit enabling a collaboration graph, -# when COLLABORATION_GRAPH is set to NO, can be accomplished by means of the -# command \collaborationgraph. Disabling a collaboration graph can be -# accomplished by means of the command \hidecollaborationgraph. +# class with other documented classes. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. COLLABORATION_GRAPH = YES # If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for -# groups, showing the direct groups dependencies. Explicit enabling a group -# dependency graph, when GROUP_GRAPHS is set to NO, can be accomplished by means -# of the command \groupgraph. Disabling a directory graph can be accomplished by -# means of the command \hidegroupgraph. See also the chapter Grouping in the -# manual. +# groups, showing the direct groups dependencies. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2580,8 +2372,8 @@ DOT_UML_DETAILS = NO # The DOT_WRAP_THRESHOLD tag can be used to set the maximum number of characters # to display on a single line. If the actual line length exceeds this threshold -# significantly it will be wrapped across multiple lines. Some heuristics are -# applied to avoid ugly line breaks. +# significantly it will wrapped across multiple lines. Some heuristics are apply +# to avoid ugly line breaks. # Minimum value: 0, maximum value: 1000, default value: 17. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2598,9 +2390,7 @@ TEMPLATE_RELATIONS = NO # If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to # YES then doxygen will generate a graph for each documented file showing the # direct and indirect include dependencies of the file with other documented -# files. Explicit enabling an include graph, when INCLUDE_GRAPH is is set to NO, -# can be accomplished by means of the command \includegraph. Disabling an -# include graph can be accomplished by means of the command \hideincludegraph. +# files. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2609,10 +2399,7 @@ INCLUDE_GRAPH = YES # If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are # set to YES then doxygen will generate a graph for each documented file showing # the direct and indirect include dependencies of the file with other documented -# files. Explicit enabling an included by graph, when INCLUDED_BY_GRAPH is set -# to NO, can be accomplished by means of the command \includedbygraph. Disabling -# an included by graph can be accomplished by means of the command -# \hideincludedbygraph. +# files. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2652,26 +2439,16 @@ GRAPHICAL_HIERARCHY = YES # If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the # dependencies a directory has on other directories in a graphical way. The # dependency relations are determined by the #include relations between the -# files in the directories. Explicit enabling a directory graph, when -# DIRECTORY_GRAPH is set to NO, can be accomplished by means of the command -# \directorygraph. Disabling a directory graph can be accomplished by means of -# the command \hidedirectorygraph. +# files in the directories. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. DIRECTORY_GRAPH = YES -# The DIR_GRAPH_MAX_DEPTH tag can be used to limit the maximum number of levels -# of child directories generated in directory dependency graphs by dot. -# Minimum value: 1, maximum value: 25, default value: 1. -# This tag requires that the tag DIRECTORY_GRAPH is set to YES. - -DIR_GRAPH_MAX_DEPTH = 1 - # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images # generated by dot. For an explanation of the image formats see the section # output formats in the documentation of the dot tool (Graphviz (see: -# https://www.graphviz.org/)). +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). @@ -2708,12 +2485,11 @@ DOT_PATH = DOTFILE_DIRS = -# You can include diagrams made with dia in doxygen documentation. Doxygen will -# then run dia to produce the diagram and insert it in the documentation. The -# DIA_PATH tag allows you to specify the directory where the dia binary resides. -# If left empty dia is assumed to be found in the default search path. +# The MSCFILE_DIRS tag can be used to specify one or more directories that +# contain msc files that are included in the documentation (see the \mscfile +# command). -DIA_PATH = +MSCFILE_DIRS = # The DIAFILE_DIRS tag can be used to specify one or more directories that # contain dia files that are included in the documentation (see the \diafile @@ -2722,10 +2498,10 @@ DIA_PATH = DIAFILE_DIRS = # When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the -# path where java can find the plantuml.jar file or to the filename of jar file -# to be used. If left blank, it is assumed PlantUML is not used or called during -# a preprocessing step. Doxygen will generate a warning when it encounters a -# \startuml command in this case and will not generate output for the diagram. +# path where java can find the plantuml.jar file. If left blank, it is assumed +# PlantUML is not used or called during a preprocessing step. Doxygen will +# generate a warning when it encounters a \startuml command in this case and +# will not generate output for the diagram. PLANTUML_JAR_PATH = @@ -2763,6 +2539,18 @@ DOT_GRAPH_MAX_NODES = 50 MAX_DOT_GRAPH_DEPTH = 0 +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, because dot on Windows does not seem +# to support this out of the box. +# +# Warning: Depending on the platform used, enabling this option may lead to +# badly anti-aliased labels on the edges of a graph (i.e. they become hard to +# read). +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_TRANSPARENT = NO + # Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output # files in one run (i.e. multiple -o and -T options on the command line). This # makes dot run faster, but since only newer versions of dot (>1.8.10) support @@ -2775,8 +2563,6 @@ DOT_MULTI_TARGETS = NO # If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page # explaining the meaning of the various boxes and arrows in the dot generated # graphs. -# Note: This tag requires that UML_LOOK isn't set, i.e. the doxygen internal -# graphical representation for inheritance and collaboration diagrams is used. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2785,24 +2571,8 @@ GENERATE_LEGEND = YES # If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate # files that are used to generate the various graphs. # -# Note: This setting is not only used for dot files but also for msc temporary -# files. +# Note: This setting is not only used for dot files but also for msc and +# plantuml temporary files. # The default value is: YES. DOT_CLEANUP = YES - -# You can define message sequence charts within doxygen comments using the \msc -# command. If the MSCGEN_TOOL tag is left empty (the default), then doxygen will -# use a built-in version of mscgen tool to produce the charts. Alternatively, -# the MSCGEN_TOOL tag can also specify the name an external tool. For instance, -# specifying prog as the value, doxygen will call the tool as prog -T -# -o . The external tool should support -# output file formats "png", "eps", "svg", and "ismap". - -MSCGEN_TOOL = - -# The MSCFILE_DIRS tag can be used to specify one or more directories that -# contain msc files that are included in the documentation (see the \mscfile -# command). - -MSCFILE_DIRS = diff --git a/cpp/python/include/ucxx/python/worker.h b/cpp/python/include/ucxx/python/worker.h index a034bcc7..b218fc8b 100644 --- a/cpp/python/include/ucxx/python/worker.h +++ b/cpp/python/include/ucxx/python/worker.h @@ -66,6 +66,11 @@ class Worker : public ::ucxx::Worker { * auto worker = ucxx::createWorker(context, false, false); * @endcode * + * @cond Doxygen_Suppress + * + * Note: this parameter list is suppressed due to a warning in doxygen 1.9.1. + * It appears to conflict with the ucxx::createWorker docstring. + * * @param[in] context the context from which to create the worker. * @param[in] enableDelayedSubmission if `true`, each `ucxx::Request` will not be * submitted immediately, but instead delayed to @@ -73,6 +78,8 @@ class Worker : public ::ucxx::Worker { * progress thread. * @param[in] enableFuture if `true`, notifies the Python future associated with each * `ucxx::Request`. + * @endcond + * * @returns The `shared_ptr` object */ friend std::shared_ptr<::ucxx::Worker> createWorker(std::shared_ptr context, diff --git a/dependencies.yaml b/dependencies.yaml index 10ee3b09..4038b7a7 100644 --- a/dependencies.yaml +++ b/dependencies.yaml @@ -169,7 +169,7 @@ dependencies: # UCXX Build - pkg-config # Docs Build - - &doxygen doxygen=1.10.0 # pre-commit hook needs a specific version. + - &doxygen doxygen=1.9.1 # pre-commit hook needs a specific version. docs: common: - output_types: [conda]