[docs] Organize driver & feature docs into subfolders

docs/ChangeLog/20210828.md

@@ -10,11 +10,11 @@ It is also now possible to define combos that have keys overlapping with other c
 
 ### Key Overrides ([#11422](https://github.com/qmk/qmk_firmware/pull/11422)) {#key-overrides}
 
-QMK now has a new feature: [key overrides](../feature_key_overrides). This feature allows for overriding the output of key combinations involving modifiers. As an example, pressing <kbd>Shift+2</kbd> normally results in an <kbd>@</kbd> on US-ANSI keyboard layouts -- the new key overrides allow for adding similar functionality, but for any <kbd>modifier + key</kbd> press.
+QMK now has a new feature: [key overrides](../features/key_overrides). This feature allows for overriding the output of key combinations involving modifiers. As an example, pressing <kbd>Shift+2</kbd> normally results in an <kbd>@</kbd> on US-ANSI keyboard layouts -- the new key overrides allow for adding similar functionality, but for any <kbd>modifier + key</kbd> press.
 
 To illustrate, it's now possible to use the key overrides feature to translate <kbd>Shift + Backspace</kbd> into <kbd>Delete</kbd> -- an often-requested example of where this functionality comes in handy.
 
-There's far more to describe that what lives in this changelog, so head over to the [key overrides documentation](../feature_key_overrides) for more examples and info.
+There's far more to describe that what lives in this changelog, so head over to the [key overrides documentation](../features/key_overrides) for more examples and info.
 
 ### Digitizer support ([#12851](https://github.com/qmk/qmk_firmware/pull/12851))
 

docs/ChangeLog/20211127.md

@@ -31,7 +31,7 @@ QMK now has core-supplied support for the following pointing device peripherals:
 | `POINTING_DEVICE_DRIVER = pimoroni_trackball`  | Pimoroni Trackball                      |
 | `POINTING_DEVICE_DRIVER = pmw3360`             | PMW 3360                                |
 
-See the new documentation for the [Pointing Device](../feature_pointing_device) feature for more information on specific configuration for each driver.
+See the new documentation for the [Pointing Device](../features/pointing_device) feature for more information on specific configuration for each driver.
 
 ### Dynamic Tapping Term ([#11036](https://github.com/qmk/qmk_firmware/pull/11036)) {#dynamic-tapping-term}
 
@@ -116,7 +116,7 @@ Related to the previous section -- RGB Matrix modes have now been made to be opt
 
 Most keyboards keep their original functionality, but over time the QMK maintainers have found that removal of animations ends up being the quickest way to free up space... and some keyboards have had animations such as reactive effects disabled by default in order to still fit within the flash space available.
 
-The full list of configurables to turn specific animations back on can be found at on the [RGB Matrix documentation](../feature_rgb_matrix#rgb-matrix-effects) page.
+The full list of configurables to turn specific animations back on can be found at on the [RGB Matrix documentation](../features/rgb_matrix#rgb-matrix-effects) page.
 
 ### OLED task refactoring ([#14864](https://github.com/qmk/qmk_firmware/pull/14864)) {#oled-task-refactor}
 

docs/ChangeLog/20220226.md

@@ -12,7 +12,7 @@ Something something *Lets go gamers!*
 
 Pointing devices can now be shared across a split keyboard with support for a single pointing device or a pointing device on each side.
 
-See the [Pointing Device](../feature_pointing_device) documentation for further configuration options.
+See the [Pointing Device](../features/pointing_device) documentation for further configuration options.
 
 ## Changes Requiring User Action {#changes-requiring-user-action}
 

docs/ChangeLog/20220528.md

@@ -8,7 +8,7 @@ This is a new feature that allows for capslock-like functionality that turns its
 
 For instance, if you wish to type "QMK" without holding shift the entire time, you can either tap both left and right shift, or double-tap shift, to turn on _Caps Word_ -- then type `qmk` (lowercase) without holding shift. Once you hit any key other than `a`--`z`, `0`--`9`, `-`, `_`, delete, or backspace, this will go back to normal typing!
 
-There are other activation mechanisms as well as configurable options like timeout and the like -- see the [Caps Word documentation](../feature_caps_word) for more information.
+There are other activation mechanisms as well as configurable options like timeout and the like -- see the [Caps Word documentation](../features/caps_word) for more information.
 
 ### Quantum Painter ([#10174](https://github.com/qmk/qmk_firmware/pull/10174)) {#quantum-painter}
 
@@ -26,7 +26,7 @@ Quantum Painter is not supported on AVR due to complexity and size constraints.
 
 ### Encoder Mapping ([#13286](https://github.com/qmk/qmk_firmware/pull/13286)) {#encoder-mapping}
 
-One of the long-standing complaints with Encoders is that there has been no easy way to configure them in user keymaps. [#13286](https://github.com/qmk/qmk_firmware/pull/13286) added support for [Encoder Mapping](../feature_encoders#encoder-map), which allows users to define encoder functionality in a similar way to their normal keymap.
+One of the long-standing complaints with Encoders is that there has been no easy way to configure them in user keymaps. [#13286](https://github.com/qmk/qmk_firmware/pull/13286) added support for [Encoder Mapping](../features/encoders#encoder-map), which allows users to define encoder functionality in a similar way to their normal keymap.
 
 ::: warning
 This is not yet supported by QMK Configurator. It is also unlikely to ever be supported by VIA.

docs/ChangeLog/20220827.md

@@ -83,7 +83,7 @@ The now-EOL kbfirmware allowed people who aren't set up with QMK the ability to
 
 QMK has had the ability to write to internal MCU flash in order to emulate EEPROM for some time now, but it was only limited to a small number of MCUs. The base HAL used by QMK for a large number of ARM devices provides a "proper" embedded MCU flash driver, so _@tzarc_ decoupled the wear-leveling algorithm from the old flash writing code, improved it, wrote some tests, and enabled its use for a much larger number of other devices... including RP2040's XIP flash, and external SPI NOR Flash.
 
-See the [EEPROM Driver](../eeprom_driver) documentation for more information.
+See the [EEPROM Driver](../drivers/eeprom) documentation for more information.
 
 ### Pointing Device Improvements ([#16371](https://github.com/qmk/qmk_firmware/pull/16371), [#17111](https://github.com/qmk/qmk_firmware/pull/17111), [#17176](https://github.com/qmk/qmk_firmware/pull/17176), [#17482](https://github.com/qmk/qmk_firmware/pull/17482), [#17776](https://github.com/qmk/qmk_firmware/pull/17776), [#17613](https://github.com/qmk/qmk_firmware/pull/17613)) {#pointing-device-improvements}
 

docs/ChangeLog/20221126.md

@@ -4,7 +4,7 @@
 
 ### Autocorrect ([#15699](https://github.com/qmk/qmk_firmware/pull/15699)) {#autocorrect}
 
-_@getreuer_ in their infinite wisdom decided that autocorrect was a feature needed by QMK. As is customary, _@drashna_ adapted it to core and got it into a state that everyone else can use it. See [Feature: Autocorrect](../feature_autocorrect) for more ifnormation (grin).
+_@getreuer_ in their infinite wisdom decided that autocorrect was a feature needed by QMK. As is customary, _@drashna_ adapted it to core and got it into a state that everyone else can use it. See [Feature: Autocorrect](../features/autocorrect) for more ifnormation (grin).
 
 ## Changes Requiring User Action {#changes-requiring-user-action}
 
@@ -132,7 +132,7 @@ The equivalent transformations should be done for LED Matrix boards.
 
 ### Unicode mode refactoring {#unicode-mode-renaming}
 
-Unicode modes were renamed in order to prevent collision with equivalent keycodes. The available values for `UNICODE_SELECTED_MODES` changed -- see [Feature: Unicode](../feature_unicode#setting-the-input-mode) for the new list of values and how to configure them.
+Unicode modes were renamed in order to prevent collision with equivalent keycodes. The available values for `UNICODE_SELECTED_MODES` changed -- see [Feature: Unicode](../features/unicode#setting-the-input-mode) for the new list of values and how to configure them.
 
 ## Notable core changes {#notable-core}
 

docs/ChangeLog/20230226.md

@@ -106,7 +106,7 @@ void leader_end_user(void) {
 }
 ```
 
-For more information please see the [Leader Key documentation](../feature_leader_key).
+For more information please see the [Leader Key documentation](../features/leader_key).
 
 ### Updated Keyboard Codebases {#updated-keyboard-codebases}
 

docs/ChangeLog/20230528.md

@@ -24,7 +24,7 @@ Of note for keyboard designers:
 
 A new pair of keys has been added to QMK -- namely `QK_REPEAT_KEY` and `QK_ALT_REPEAT_KEY` (shortened: `QK_REP`/`QK_AREP`). These allow you to repeat the last key pressed, or in the case of the alternate key, press the "opposite" of the last key. For example, if you press `KC_LEFT`, pressing `QK_REPEAT_KEY` afterwards repeats `KC_LEFT`, but pressing `QK_ALT_REPEAT_KEY` instead sends `KC_RIGHT`.
 
-The full list of default alternate keys is available on the [Repeat Key](../feature_repeat_key) documentation.
+The full list of default alternate keys is available on the [Repeat Key](../features/repeat_key) documentation.
 
 To enable these keys, in your keymap's `rules.mk`, add:
 
@@ -93,7 +93,7 @@ Additionally, this ensures that builds on QMK Configurator produce some sort of
 
 The "classic" OLED driver picked up support for additional sizes of OLED displays, support for the SH1107 controller, and SPI-based OLED support.
 
-Other configurable items are available and can be found on the [OLED Driver page](../feature_oled_driver).
+Other configurable items are available and can be found on the [OLED Driver page](../features/oled_driver).
 
 ## Full changelist {#full-changelist}
 

docs/ChangeLog/20230827.md

@@ -42,7 +42,7 @@ AVR sees minimal (if any) benefit -- `double` was interpreted as `float` on AVR
 
 ### Remove encoder in-matrix workaround code ([#20389](https://github.com/qmk/qmk_firmware/pull/20389)) {#remove-encoder-in-matrix-workaround-code}
 
-Some keyboards "hacked" encoder support into spare slots in the key matrix in order to interoperate with VIA. This workaround is no longer necessary, and the code has been removed. If you have a keyboard that uses this workaround, you will need to update your keymap to use the new [Encoder Map](../feature_encoders#encoder-map) API instead.
+Some keyboards "hacked" encoder support into spare slots in the key matrix in order to interoperate with VIA. This workaround is no longer necessary, and the code has been removed. If you have a keyboard that uses this workaround, you will need to update your keymap to use the new [Encoder Map](../features/encoders#encoder-map) API instead.
 
 ### Unicodemap keycodes rename ([#21092](https://github.com/qmk/qmk_firmware/pull/21092)) {#unicodemap-keycodes-rename}
 

docs/ChangeLog/20240225.md

@@ -120,7 +120,7 @@ In some cases, accidental automatic activation of the mouse layer made it diffic
 
 ### DIP Switch Mapping ([#22543](https://github.com/qmk/qmk_firmware/pull/22543)) {#dip-switch-map}
 
-Much like Encoder Mapping, DIP Switch Mapping allows for specifying a table of actions to execute when a DIP switch state changes. See the [DIP Switch Documentation](../feature_dip_switch#dip-switch-map) for more information.
+Much like Encoder Mapping, DIP Switch Mapping allows for specifying a table of actions to execute when a DIP switch state changes. See the [DIP Switch Documentation](../features/dip_switch#dip-switch-map) for more information.
 
 ```c
 #if defined(DIP_SWITCH_MAP_ENABLE)