diff --git a/docs/feature_bluetooth.md b/docs/feature_bluetooth.md index 7b450b1ac8fc..08e5f24ac558 100644 --- a/docs/feature_bluetooth.md +++ b/docs/feature_bluetooth.md @@ -26,7 +26,10 @@ A Bluefruit UART friend can be converted to an SPI friend, however this [require ## Bluetooth Rules.mk Options -Use only one of these + +The currently supported Bluetooth chipsets do not support [N-Key Rollover (NKRO)](reference_glossary.md#n-key-rollover-nkro), so `rules.mk` must contain `NKRO_ENABLE = no`. + +Use only one of these to enable Bluetooth: * BLUETOOTH_ENABLE = yes (Legacy Option) * BLUETOOTH = RN42 * BLUETOOTH = AdafruitBLE diff --git a/docs/feature_oled_driver.md b/docs/feature_oled_driver.md index d106d3d13ee0..9e33a321ce0d 100644 --- a/docs/feature_oled_driver.md +++ b/docs/feature_oled_driver.md @@ -300,6 +300,10 @@ bool oled_on(void); // Returns true if the screen was off or turns off bool oled_off(void); +// Returns true if the oled is currently on, false if it is +// not +bool is_oled_on(void); + // Basically it's oled_render, but with timeout management and oled_task_user calling! void oled_task(void); diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index a8fad59a191a..b70a5fcba082 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -129,7 +129,7 @@ Configure the hardware via your `config.h`: From this point forward the configuration is the same for all the drivers. The `led_config_t` struct provides a key electrical matrix to led index lookup table, what the physical position of each LED is on the board, and what type of key or usage the LED if the LED represents. Here is a brief example: ```c -const led_config_t g_led_config = { { +led_config_t g_led_config = { { // Key Matrix to LED Index { 5, NO_LED, NO_LED, 0 }, { NO_LED, NO_LED, NO_LED, NO_LED }, diff --git a/docs/ja/tap_hold.md b/docs/ja/tap_hold.md new file mode 100644 index 000000000000..a0f08976283c --- /dev/null +++ b/docs/ja/tap_hold.md @@ -0,0 +1,195 @@ +# タップホールド設定オプション + + + +タップホールドオプションは素晴らしいものですが、問題が無いわけではありません。デフォルト設定を適切なものにしようとしましたが、一部の人にとってまだ問題を引き起こすかもしれません。 + +次のオプションによりタップホールドキーの挙動を変更することができます。 + +## タッピング時間 + +以下の機能の全ての核心は、タッピング時間の設定です。これにより、何をタップとし、何をホールドとするかが決まります。これが自然に感じられるぴったりのタイミングは、キーボードごと、スイッチごと、あるいはキーごとに異ることもありえます。 + +`config.h` に以下の設定を追加することで、この時間を全体的に設定することができます: + +```c +#define TAPPING_TERM 200 +``` + +この設定はミリ秒で定義され、デフォルトは 200ms です。これは大多数の人にとっての適切な平均値です。 + +この機能をより細かく制御するために、以下を `config.h` に追加することができます: +```c +#define TAPPING_TERM_PER_KEY +``` + +そして、以下の関数をキーマップに追加します: + +```c +uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case SFT_T(KC_SPC): + return TAPPING_TERM + 1250; + case LT(1, KC_GRV): + return 130; + default: + return TAPPING_TERM; + } +} +``` + + +## 許容ホールド + +[PR#1359](https://github.com/qmk/qmk_firmware/pull/1359/) 以降、新しい `config.h` オプションがあります: + +```c +#define PERMISSIVE_HOLD +``` + +これは高速なタイピストや高い `TAPPING_TERM` 設定に対して、タップとホールドキー(モッドタップのような)の動作を向上させます。 + +モッドタップキーを押し、他のキーをタップ(押して放す)して、モッドタップキーを放すという動作の全てをタッピング時間内に行うと、両方のキーの「タッピング」機能が出力されます。 + +例えば: + +- `SFT_T(KC_A)` を押す +- `KC_X` を押す +- `KC_X` を放す +- `SFT_T(KC_A)` を放す + +通常、これら全てを `TAPPING_TERM` (デフォルト: 200ms) 内で行うと、ファームウェアとホストシステムによって `ax` として登録されます。許容ホールドを有効にすると、別のキーがタップされた場合にモッドタップキーを修飾キーと見なすように処理を変更し、 `X` (`SHIFT`+`x`) と登録されます。 + +?> `モッドタップ割り込みの無視`を有効にしている場合、これにより両方の動きが変更されます。通常のキーには、最初のキーが最初に放された場合、あるいは両方のキーが `TAPPING_TERM` より長くホールドされた場合に、修飾キーが追加されます。 + +この機能をより細かく制御するために、以下を `config.h` に追加することができます: + +```c +#define PERMISSIVE_HOLD_PER_KEY +``` + +そして、以下の関数をキーマップに追加します: + +```c +bool get_permissive_hold(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case LT(1, KC_BSPC): + return true; + default: + return false; + } +} +``` + +## モッドタップ割り込みの無視 + +この設定を有効にするには、これを `config.h` に追加してください: + +```c +#define IGNORE_MOD_TAP_INTERRUPT +``` + +許容ホールドと同様に、これは高速なタイピストのためのファームウェアの処理方法を変更します。モッドタップキーを押し、他のキーを押し、モッドタップキーを放し、通常のキーを放すと、通常は両方のキーの「タッピング」機能が出力されます。これはローリングコンボキーには望ましくないかもしれません。 + +`モッドタップ割り込みの無視`を設定するには、両方のキーを `TAPPING_TERM` の間ホールドすると、(その修飾キーの)ホールド機能を実行する必要があります。 + +例えば: + +- `SFT_T(KC_A)` を押す +- `KC_X` を押す +- `SFT_T(KC_A)` を放す +- `KC_X` を放す + +通常、これは `X` (`SHIFT`+`x`) を送信します。`モッドタップ割り込みの無視` を有効にすると、ホールドアクションを登録するには、両方のキーを `TAPPING_TERM` の間ホールドする必要があります。この場合、素早いタップは `ax` を送信しますが、両方をホールドすると、`X` (`SHIFT`+`x`) を出力します。 + + +?> __注意__: これはモディファイアにのみ関係し、レイヤー切り替えキーには関係しません。 + +?> `許容ホールド`を有効にすると、これは両方がどのように動作するかを変更します。通常のキーには、最初のキーが最初に放された場合、あるいは両方のキーが `TAPPING_TERM` より長くホールドされた場合に、修飾キーが追加されます。 + +この機能をより細かく制御するために、以下を `config.h` に追加することができます: + +```c +#define IGNORE_MOD_TAP_INTERRUPT_PER_KEY +``` + +そして、以下の関数をキーマップに追加します: + +```c +bool get_ignore_mod_tap_interrupt(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case SFT_T(KC_SPC): + return true; + default: + return false; + } +} +``` + +## タッピング強制ホールド + +`タッピング強制ホールド` を有効にするには、以下を `config.h` に追加します: + +```c +#define TAPPING_FORCE_HOLD +``` + +タップの後でユーザがキーをホールドすると、これは修飾キーをホールドするかわりにタップされたキーを繰り返します。これにより、タップされたキーのために自動繰り返しを使うことができます。 + +例: + +- SFT_T(KC_A) を押す +- SFT_T(KC_A) を放す +- SFT_T(KC_A) を押す +- タッピング時間より長く待ちます... +- SFT_T(KC_A) を放す + +デフォルトの設定では、最初に放したときに `a` が送信され、2回目の押下で `a` が送信され、コンピュータに自動リピート機能を作動させることができます。 + +`TAPPING_FORCE_HOLD` を使うと、2回目の押下は Shift として解釈され、それをタップして使った後ですぐに修飾キーとして使うことができます。 + +!> `TAPPING_FORCE_HOLD` はタッピングトグル(`TT` レイヤーキーコード、ワンショットタッピングトグルなど)を使うものをすべて破壊します。 + +この機能をより細かく制御するために、以下を `config.h` に追加することができます: + +```c +#define TAPPING_FORCE_HOLD_PER_KEY +``` + +そして、以下の関数をキーマップに追加します: + +```c +bool get_tapping_force_hold(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case LT(1, KC_BSPC): + return true; + default: + return false; + } +} +``` + +## レトロタッピング + +`レトロタッピング`を有効にするには、以下を `config.h` に追加してください: + +```c +#define RETRO_TAPPING +``` + +他のキーを押さずにデュアルファンクションキーを押して放しても何も起こりません。レトロタッピングを有効にすると、他のキーを押さずにキーを放すと、元のキーコードがタッピング時間外であっても送信されます。 + +例えば、他のキーを押すことなく `LT(2, KC_SPACE)` を押したり放したりしても何も起こりません。これを有効にすると、代わりに `KC_SPACE` を送信します。 + +## キー別の関数にキーレコードを含めるのはなぜですか？ + +「キー別」の関数全てにキーレコードを含んでいることに気付いたかもしれません。そしてなぜそうしたのか不思議に思っているかもしれません。 + +まぁ、それは単純に本当にカスタマイズのためです。ただし、具体的には、それはキーボードの配線方法によって異なります。例えば、各行が実際にキーボードのマトリックスの1行を使っている場合、キーコード全体をチェックする代わりに、`if (record->event.row == 3)` を使うほうが簡単かもしれません。これは、ホームキー行でタップホールドタイプのキーを使っている人にとって特に便利です。そのため、通常のタイピングを妨げないように微調整することができるのではないでしょうか。 + +## `*_kb` や `*_user` 関数が無いのはなぜですか？ + +QMK にある他の多くの関数とは異なり、quantum あるいはキーボードレベルの関数を持つ必要はありません (または理由さえありません)。ここではユーザレベルの関数だけが有用なため、そのようにマークする必要はありません。 diff --git a/docs/ja/understanding_qmk.md b/docs/ja/understanding_qmk.md new file mode 100644 index 000000000000..74b37398f84a --- /dev/null +++ b/docs/ja/understanding_qmk.md @@ -0,0 +1,195 @@ +# QMK のコードの理解 + + + +このドキュメントでは、QMK ファームウェアがどのように機能するかを非常に高いレベルから説明しようとしています。基本的なプログラミングの概念を理解していることを前提としていますが、(実例を示す必要がある場合を除き) C に精通していることを前提にはしていません。以下のドキュメントの基本的な知識があることを前提としています。 + +* [入門](ja/getting_started_introduction.md) +* [キーボードがどのように動作するか](ja/how_keyboards_work.md) +* [FAQ](ja/faq.md) + +## スタートアップ + +QMK は他のコンピュータプログラムと何ら変わりないと考えることができます。開始され、タスクを実行し、そして終了します。プログラムのエントリーポイントは、他の C プログラムと同様に、`main()` 関数です。ただし、QMK を初めて触る人は、`main()` 関数が複数の場所に現れるため、混乱するかもしれません。また、どれを見ればよいか分かりにくいかもしれません。 + +複数ある理由は、QMK は様々なプラットフォームをサポートするからです。最も一般的なプラットフォームは `lufa` です。これは atmega32u4 のような AVR プロセッサ上で実行されます。また、`chibios` および `vusb` もサポートします。 + +ここでは AVR プロセッサに焦点を当てます。これは `lufa` プラットフォームを使います。`main()` 関数は [tmk_core/protocol/lufa/lufa.c](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/protocol/lufa/lufa.c#L1028) にあります。関数にざっと目を通すと、(ホストへの USB も含めて)設定された全てのハードウェアが初期化され、プログラムのコア部分が [`while(1)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/protocol/lufa/lufa.c#L1069) で開始されることが分かります。これが[メインループ](#the-main-loop)です。 + +## メインループ + +コードのこの部分は、同じ命令セットを永久にループ処理するため、「メインループ」と呼ばれます。ここはキーボードに必要なことを実行させる関数を QMK が呼び出す場所です。一見、多くの機能を持つように見えるかもしれませんが、大抵の場合、コードは `#define` によって無効にされます。 + +``` + keyboard_task(); +``` + +ここで、全てのキーボードの固有の機能が実行されます。`keyboard_task()` のソースコードは [tmk_core/common/keyboard.c](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/common/keyboard.c#L216) にあり、マトリックスの変化を検知し、LED の状態をオンオフする責任があります。 + +`keyboard_task()` に以下を処理するコードがあります: + +* [マトリックスのスキャン](#matrix-scanning) +* マウスの処理 +* シリアルリンク +* ビジュアライザ +* キーボードの状態の LED (Caps Lock, Num Lock, Scroll Lock) + +#### マトリックスのスキャン + +マトリックスのスキャンはキーボードファームウェアのコアの機能です。これは今どのキーが押されているかを検知するプロセスであり、キーボードはこの機能を1秒間に何度も何度も実行します。ファームウェアの CPU 時間の 99% はマトリックスのスキャンに費やされていると言っても過言ではありません。 + +実際のマトリックスの検知には様々な方法がありますが、それはこのドキュメントの対象外です。マトリックスのスキャンをブラックボックスとして扱っても問題ありません。マトリックスの現在の状態を求めると、以下のようなデータ構造を取得します: + + +``` +{ + {0,0,0,0}, + {0,0,0,0}, + {0,0,0,0}, + {0,0,0,0}, + {0,0,0,0} +} +``` + +これは 4行x5列のテンキー(訳注: 5行x4列の間違いと思われます)のマトリックスを表す直接的な表現のデータ構造です。キーが押されると、マトリックス内のそのキーの位置が、 `0` ではなく `1` として返されます。 + +マトリックスのスキャンは1秒間に何度も実行されます。正確なレートは様々ですが、知覚できるような遅延を避けるために、秒間に少なくとも10回実行します。 + +##### マトリックスから物理的なレイアウトへのマップ + +キーボード上の各スイッチの状態が分かると、それをキーコードへマップする必要があります。QMK ではキーコードへのマップは C マクロを使うことで行われ、C マクロにより物理的なレイアウトの定義はキーコードの定義から分離されています。(訳注：「キーコードの定義」は「キーコードのマトリクス配列による定義」と思われる) + +キーボードレベルで、キーボードのマトリックスを物理キーにマップする C マクロ (一般的には、`LAYOUT()` という名前)を定義します。マトリックスにスイッチがない場所がある場合、このマクロを使って KC_NO を事前に埋め込むことができ、キーマップの定義を扱いやすくすることができます。以下は、テンキー用の `LAYOUT()` マクロです: + +```c +#define LAYOUT( \ + k00, k01, k02, k03, \ + k10, k11, k12, k13, \ + k20, k21, k22, \ + k30, k31, k32, k33, \ + k40, k42 \ +) { \ + { k00, k01, k02, k03, }, \ + { k10, k11, k12, k13, }, \ + { k20, k21, k22, KC_NO, }, \ + { k30, k31, k32, k33, }, \ + { k40, KC_NO, k42, KC_NO } \ +} +``` + +`LAYOUT()` マクロの2つ目のブロックが、上記のマトリックススキャン配列とどのように一致しているかに注目してください。このマクロはマトリックスのスキャン配列をキーコードにマップするものです。ただし、17キーのテンキーを見ると、マトリックスにはスイッチが置けるが、キーが大きいために実際にはスイッチが無い箇所が3つあることが分かります。これらのスペースに `KC_NO` を設定したので、キーマップ定義には必要ありません。 + +このマクロを使って、少し変わったマトリックスのレイアウト、例えば [Clueboard rev 2](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/66/rev2/rev2.h) を扱うこともできます。その説明はこのドキュメントの範囲外です。 + +##### キーコードの割り当て + +キーマップレべルでは、上記の `LAYOUT()` マクロを使って、物理的な場所からマトリックスの場所にマッピングします。以下のようになります: + +``` +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT( + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ + KC_P7, KC_P8, KC_P9, KC_PPLS, \ + KC_P4, KC_P5, KC_P6, \ + KC_P1, KC_P2, KC_P3, KC_PENT, \ + KC_P0, KC_PDOT) +} +``` + +これら全ての引数が、前のセクションの `LAYOUT()` マクロの前半とどのように一致しているかについて注目してください。このようにして、キーコードを取得して、それを前述のマトリックススキャンにマップします。 + +##### 状態変更の検知 + +上記のマトリックススキャンはある時点のマトリックスの状態を伝えますが、コンピュータは変更のみを知りたいだけで、現在の状態を気にしません。QMK は最後のマトリックススキャンの結果を格納し、このマトリックスから結果を比較して、いつキーが押されたか放されたかを決定します。 + +例を見てみましょう。キーボードスキャンループの途中に移動して、前のスキャンが以下のようになっていることがわかったとします: + +``` +{ + {0,0,0,0}, + {0,0,0,0}, + {0,0,0,0}, + {0,0,0,0}, + {0,0,0,0} +} +``` + +現在のスキャンが完了すると、以下のように見えるとします: + +``` +{ + {1,0,0,0}, + {0,0,0,0}, + {0,0,0,0}, + {0,0,0,0}, + {0,0,0,0} +} +``` + +キーマップと比較すると、押されたキーが KC_NLCK であることが分かります。ここから、`process_record` 関数群を呼び出します。 + + + +##### Process Record + +`process_record()` 関数自体は一見簡単に見えますが、その内部は QMK の様々なレベルで機能を上書きするためのゲートウェイが隠されています。キーボード/キーマップレベルの機能について調べる必要があるときは、以下に列挙した一連のイベントを手引帳として使います。`rules.mk` またはほかの場所で設定されたオプションに応じて、最終的なファームウェアに以下の関数のサブセットのみが含まれます。 + +* [`void process_record(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/common/action.c#L172) + * [`bool process_record_quantum(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L206) + * [このレコードをキーコードにマップする](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L226) + * [`void velocikey_accelerate(void)`](https://github.com/qmk/qmk_firmware/blob/c1c5922aae7b60b7c7d13d3769350eed9dda17ab/quantum/velocikey.c#L27) + * [`void preprocess_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_tap_dance.c#L119) + * [`bool process_key_lock(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_key_lock.c#L62) + * [`bool process_clicky(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_clicky.c#L79) + * [`bool process_haptic(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/2cee371bf125a6ec541dd7c5a809573facc7c456/drivers/haptic/haptic.c#L216) + * [`bool process_record_kb(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/card/card.c#L20) + * [`bool process_record_user(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/card/keymaps/default/keymap.c#L58) + * [`bool process_rgb_matrix(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/rgb_matrix.c#L139) + * [`bool process_midi(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_midi.c#L81) + * [`bool process_audio(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_audio.c#L19) + * [`bool process_steno(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_steno.c#L160) + * [`bool process_music(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_music.c#L114) + * [`bool process_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_tap_dance.c#L141) + * [`bool process_unicode_common(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicode_common.c#L169) は、以下のいずれかを呼び出します: + * [`bool process_unicode(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicode.c#L20) + * [`bool process_unicodemap(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicodemap.c#L46) + * [`bool process_ucis(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_ucis.c#L95) + * [`bool process_leader(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_leader.c#L51) + * [`bool process_combo(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_combo.c#L115) + * [`bool process_printer(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_printer.c#L77) + * [`bool process_auto_shift(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_auto_shift.c#L94) + * [`bool process_terminal(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_terminal.c#L264) + * [Quantum 固有のキーコードを識別して処理する](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L291) + +この一連のイベントの中の任意のステップで (`process_record_kb()` のような)関数は `false` を返して、以降の処理を停止することができます。 + +この呼び出しの後で、`post_process_record()` が呼ばれます。これはキーコードが通常処理された後に実行する必要がある追加のクリーンアップを処理するために使うことができます。 + +* [`void post_process_record(keyrecord_t *record)`]() + * [`void post_process_record_quantum(keyrecord_t *record)`]() + * [このレコードをキーコードにマップする]() + * [`void post_process_clicky(uint16_t keycode, keyrecord_t *record)`]() + * [`void post_process_record_kb(uint16_t keycode, keyrecord_t *record)`]() + * [`void post_process_record_user(uint16_t keycode, keyrecord_t *record)`]() + + diff --git a/docs/other_vscode.md b/docs/other_vscode.md index d98b96bdf189..d132afaab6e7 100644 --- a/docs/other_vscode.md +++ b/docs/other_vscode.md @@ -48,7 +48,7 @@ This part is super simple. However, there is some configuration that we need to ### Configuring VS Code -First, we need to set up IntelliSense. This isn't strictly required, but it will make your life a LOT easier. To do this, we need to create the `.vscode/c_cpp_properies.json` file in the QMK Firmware folder, You can do this all manually, but I've done most of the work already. +First, we need to set up IntelliSense. This isn't strictly required, but it will make your life a LOT easier. To do this, we need to create the `.vscode/c_cpp_properties.json` file in the QMK Firmware folder, You can do this all manually, but I've done most of the work already. Grab [this file](https://gist.github.com/drashna/48e2c49ce877be592a1650f91f8473e8) and save it. You may need to edit this file, if you didn't install MSYS2 to the default location, or are using WSL/LxSS. diff --git a/docs/ref_functions.md b/docs/ref_functions.md index 997c3fa2ee37..176095070b18 100644 --- a/docs/ref_functions.md +++ b/docs/ref_functions.md @@ -43,7 +43,9 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { ### `update_tri_layer_state(state, x, y, z)` The other function is `update_tri_layer_state(state, x, y, z)`. This function is meant to be called from the [`layer_state_set_*` functions](custom_quantum_functions.md#layer-change-code). This means that any time that you use a keycode to change the layer, this will be checked. So you could use `LT(layer, kc)` to change the layer and it will trigger the same layer check. -The caveat to this method is that you cannot access the `z` layer without having `x` and `y` layers on, since if you try to activate just layer `z`, it will run this code and turn off layer `z` before you could use it. +There are a couple of caveats to this method: +1. You cannot access the `z` layer without having `x` and `y` layers on, since if you try to activate just layer `z`, it will run this code and turn off layer `z` before you could use it. +2. Because layers are processed from the highest number `z` should be a higher layer than `x` and `y` or you may not be able to access it. #### Example @@ -97,7 +99,7 @@ To wipe the EEPROM, run `eeconfig_init()` from your function or macro to reset m ## Tap random key -If you want to send a random character to the host computer, you can use the `tap_random_base64()` function. This [pseudorandomly](https://en.wikipedia.org/wiki/Pseudorandom_number_generator) selects a number between 0 and 63, and then sends a key press based on that selection. (0–25 is `A`–`Z`, 26–51 is `a`–`z`, 52–61 is `0`–`9`, 62 is `+` and 63 is `/`). +If you want to send a random character to the host computer, you can use the `tap_random_base64()` function. This [pseudorandomly](https://en.wikipedia.org/wiki/Pseudorandom_number_generator) selects a number between 0 and 63, and then sends a key press based on that selection. (0–25 is `A`–`Z`, 26–51 is `a`–`z`, 52–61 is `0`–`9`, 62 is `+` and 63 is `/`). ?> Needless to say, but this is _not_ a cryptographically secure method of generating random Base64 keys or passwords. diff --git a/drivers/avr/ssd1306.c b/drivers/avr/ssd1306.c index 205f749502b8..1a09a2bcb789 100644 --- a/drivers/avr/ssd1306.c +++ b/drivers/avr/ssd1306.c @@ -11,6 +11,8 @@ # include "sendchar.h" # include "timer.h" +struct CharacterMatrix display; + // Set this to 1 to help diagnose early startup problems // when testing power-on with ble. Turn it off otherwise, // as the latency of printing most of the debug info messes diff --git a/drivers/avr/ssd1306.h b/drivers/avr/ssd1306.h index 9669d1b7e77e..9131afcf6122 100644 --- a/drivers/avr/ssd1306.h +++ b/drivers/avr/ssd1306.h @@ -66,7 +66,7 @@ struct CharacterMatrix { bool dirty; }; -struct CharacterMatrix display; +extern struct CharacterMatrix display; bool iota_gfx_init(void); void iota_gfx_task(void); diff --git a/drivers/oled/oled_driver.c b/drivers/oled/oled_driver.c index 9ae737ca2d39..0e15c3c4b21a 100644 --- a/drivers/oled/oled_driver.c +++ b/drivers/oled/oled_driver.c @@ -534,6 +534,8 @@ bool oled_off(void) { return !oled_active; } +bool is_oled_on(void) { return oled_active; } + // Set the specific 8 lines rows of the screen to scroll. // 0 is the default for start, and 7 for end, which is the entire // height of the screen. For 128x32 screens, rows 4-7 are not used. diff --git a/drivers/oled/oled_driver.h b/drivers/oled/oled_driver.h index 9a4b98d2fdde..58e2bb7386e1 100644 --- a/drivers/oled/oled_driver.h +++ b/drivers/oled/oled_driver.h @@ -257,6 +257,10 @@ bool oled_on(void); // Returns true if the screen was off or turns off bool oled_off(void); +// Returns true if the oled is currently on, false if it is +// not +bool is_oled_on(void); + // Basically it's oled_render, but with timeout management and oled_task_user calling! void oled_task(void); diff --git a/keyboards/1upkeyboards/1up60hte/keymaps/badger/keymap.c b/keyboards/1upkeyboards/1up60hte/keymaps/badger/keymap.c new file mode 100644 index 000000000000..8e64c543d524 --- /dev/null +++ b/keyboards/1upkeyboards/1up60hte/keymaps/badger/keymap.c @@ -0,0 +1,59 @@ +/* +Copyright 2020 Dan White + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "badger.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY_MAC] = LAYOUT_tsangan(\ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + MOVE_MAC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, CFG_MAC, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, ADJUST, KC_RALT, KC_RGUI), + + [_MOVE_MAC] = LAYOUT_tsangan(\ + MAC_FRC, MM_LEFT, MM_RGHT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_0, IJ_TOP, IJ_BOTT, _______, _______, \ + KC_BACK, IJ_STEP, IJ_INTO, IJ_OUT, IJ_RUN, IJ_STOP, _______, WD_BACK, KC_HOME, KC_END, WD_FRWD, IJ_BACK, IJ_FWD, KC_NEXT, \ + _______, MM_LH, MM_MAX, MM_RH, IJ_FIND, IJ_IMPS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, CM_RIGHT, CM_DOWN, _______, \ + _______, MM_UH, MM_BH, MAC_CPY, MAC_PST, IJ_IMPH, _______, IJ_REN, IJ_IMPL, IJ_DECL, IJ_USAG, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______), + + [_QWERTY_LINUX] = LAYOUT_tsangan(\ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + MOVE, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, CFG_LNX, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, ADJUST, KC_RALT, KC_RGUI), + + [_MOVE_LINUX] = LAYOUT_tsangan(\ + KC_GRV, VD_1, VD_2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, \ + KC_BACK, WM_VD1, WM_UH, WM_VD2, RESET, KC_MSTP, KC_MPLY, KC_PGUP, KC_HOME, KC_END, KC_PGDN, _______, _______, KC_NEXT, \ + _______, WM_LH, WM_MAX, WM_RH, WD_FRWD, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, CS_RIGHT, CS_DOWN, _______, \ + _______, WM_VD3, WM_BH, OS_COPY, OS_PAST, WD_BACK, KC_MNXT, KC_MUTE, KC_WBAK, KC_WFWD, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______), + + [_ADJUST] = LAYOUT_tsangan(\ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, \ + _______, _______, _______, _______, KC_WREF, KC_MSTP, KC_MPLY, KC_PGUP, _______, _______, KC_PGDN, KC_VOLD, KC_VOLU, KC_INS, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, KC_CAPS, _______, KC_MPRV, KC_MNXT, KC_MUTE, KC_WBAK, KC_WFWD, KC_WSCH, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______), + + [_CONFIG] = LAYOUT_tsangan(\ + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, \ + _______, NK_ON, NK_OFF, EEP_RST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, \ + _______, GE_SWAP, GE_NORM, DEBUG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_SPI, RGB_M_B, _______, _______, RGB_TOG, _______, \ + _______, DF_1, DF_2, _______, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_SPD, RGB_M_K, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______) +}; diff --git a/keyboards/1upkeyboards/1up60rgb/1up60rgb.h b/keyboards/1upkeyboards/1up60rgb/1up60rgb.h index 61d064abb7a2..5ee6c12bcf5b 100644 --- a/keyboards/1upkeyboards/1up60rgb/1up60rgb.h +++ b/keyboards/1upkeyboards/1up60rgb/1up60rgb.h @@ -33,6 +33,21 @@ { k40, k41, XXX, k43, XXX, XXX, k46, XXX, XXX, XXX, k4A, k4B, XXX, k4D, k4E } \ } +/* ANSI-Tsangan variant, with split right shift key */ +#define LAYOUT_60_ansi_tsangan_split_rshift( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \ + k10, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ + k20, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2E, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3D, k3E, \ + k40, k41, k43, k46, k4B, k4D, k4E \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0D }, \ + { k10, XXX, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ + { k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2E, XXX }, \ + { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, XXX, k3D, k3E }, \ + { k40, k41, XXX, k43, XXX, XXX, k46, XXX, XXX, XXX, XXX, k4B, XXX, k4D, k4E } \ +} + /* ISO variant. Remove useless ANSI keys */ #define LAYOUT_60_iso( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \ @@ -63,6 +78,21 @@ { k40, k41, XXX, k43, XXX, XXX, k46, XXX, XXX, XXX, k4A, k4B, XXX, k4D, k4E } \ } +/* ANSI Variant */ +#define LAYOUT_60_ansi_split_rshift( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \ + k10, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ + k20, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2E, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3D, k3E, \ + k40, k41, k43, k46, k4A, k4B, k4D, k4E \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0D }, \ + { k10, XXX, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ + { k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2E, XXX }, \ + { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, XXX, k3D, k3E }, \ + { k40, k41, XXX, k43, XXX, XXX, k46, XXX, XXX, XXX, k4A, k4B, XXX, k4D, k4E } \ +} + /* HHKB Variant */ #define LAYOUT_60_hhkb( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \ diff --git a/keyboards/1upkeyboards/1up60rgb/info.json b/keyboards/1upkeyboards/1up60rgb/info.json index 2185f0bb1910..9f6ed62189ff 100644 --- a/keyboards/1upkeyboards/1up60rgb/info.json +++ b/keyboards/1upkeyboards/1up60rgb/info.json @@ -6,22 +6,68 @@ "height": 5, "layouts": { "LAYOUT_all": { - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"~", "x":13, "y":0}, {"label":"Del", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] + "layout": [ + {"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"~", "x":13, "y":0}, {"label":"Del", "x":14, "y":0}, + {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25}, + {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] }, "LAYOUT_60_ansi": { - "layout": [{"x":0, "y":0, "label":"~"}, {"x":1, "y":0, "label":"!"}, {"x":2, "y":0, "label":"@"}, {"x":3, "y":0, "label":"#"}, {"x":4, "y":0, "label":"$"}, {"x":5, "y":0, "label":"%"}, {"x":6, "y":0, "label":"^"}, {"x":7, "y":0, "label":"&"}, {"x":8, "y":0, "label":"*"}, {"x":9, "y":0, "label":"("}, {"x":10, "y":0, "label":")"}, {"x":11, "y":0, "label":"_"}, {"x":12, "y":0, "label":"+"}, {"x":13, "y":0, "label":"Backspace", "w":2}, {"x":0, "y":1, "label":"Tab", "w":1.5}, {"x":1.5, "y":1, "label":"Q"}, {"x":2.5, "y":1, "label":"W"}, {"x":3.5, "y":1, "label":"E"}, {"x":4.5, "y":1, "label":"R"}, {"x":5.5, "y":1, "label":"T"}, {"x":6.5, "y":1, "label":"Y"}, {"x":7.5, "y":1, "label":"U"}, {"x":8.5, "y":1, "label":"I"}, {"x":9.5, "y":1, "label":"O"}, {"x":10.5, "y":1, "label":"P"}, {"x":11.5, "y":1, "label":"{"}, {"x":12.5, "y":1, "label":"}"}, {"x":13.5, "y":1, "label":"|", "w":1.5}, {"x":0, "y":2, "label":"Caps Lock", "w":1.75}, {"x":1.75, "y":2, "label":"A"}, {"x":2.75, "y":2, "label":"S"}, {"x":3.75, "y":2, "label":"D"}, {"x":4.75, "y":2, "label":"F"}, {"x":5.75, "y":2, "label":"G"}, {"x":6.75, "y":2, "label":"H"}, {"x":7.75, "y":2, "label":"J"}, {"x":8.75, "y":2, "label":"K"}, {"x":9.75, "y":2, "label":"L"}, {"x":10.75, "y":2, "label":":"}, {"x":11.75, "y":2, "label":"\""}, {"x":12.75, "y":2, "label":"Enter", "w":2.25}, {"x":0, "y":3, "label":"Shift", "w":2.25}, {"x":2.25, "y":3, "label":"Z"}, {"x":3.25, "y":3, "label":"X"}, {"x":4.25, "y":3, "label":"C"}, {"x":5.25, "y":3, "label":"V"}, {"x":6.25, "y":3, "label":"B"}, {"x":7.25, "y":3, "label":"N"}, {"x":8.25, "y":3, "label":"M"}, {"x":9.25, "y":3, "label":"<"}, {"x":10.25, "y":3, "label":">"}, {"x":11.25, "y":3, "label":"?"}, {"x":12.25, "y":3, "label":"Shift", "w":2.75}, {"x":0, "y":4, "label":"Ctrl", "w":1.25}, {"x":1.25, "y":4, "label":"Win", "w":1.25}, {"x":2.5, "y":4, "label":"Alt", "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "label":"Alt", "w":1.25}, {"x":11.25, "y":4, "label":"Win", "w":1.25}, {"x":12.5, "y":4, "label":"Menu", "w":1.25}, {"x":13.75, "y":4, "label":"Ctrl", "w":1.25}] + "layout": [ + {"x":0, "y":0, "label":"~"}, {"x":1, "y":0, "label":"!"}, {"x":2, "y":0, "label":"@"}, {"x":3, "y":0, "label":"#"}, {"x":4, "y":0, "label":"$"}, {"x":5, "y":0, "label":"%"}, {"x":6, "y":0, "label":"^"}, {"x":7, "y":0, "label":"&"}, {"x":8, "y":0, "label":"*"}, {"x":9, "y":0, "label":"("}, {"x":10, "y":0, "label":")"}, {"x":11, "y":0, "label":"_"}, {"x":12, "y":0, "label":"+"}, {"x":13, "y":0, "label":"Backspace", "w":2}, + {"x":0, "y":1, "label":"Tab", "w":1.5}, {"x":1.5, "y":1, "label":"Q"}, {"x":2.5, "y":1, "label":"W"}, {"x":3.5, "y":1, "label":"E"}, {"x":4.5, "y":1, "label":"R"}, {"x":5.5, "y":1, "label":"T"}, {"x":6.5, "y":1, "label":"Y"}, {"x":7.5, "y":1, "label":"U"}, {"x":8.5, "y":1, "label":"I"}, {"x":9.5, "y":1, "label":"O"}, {"x":10.5, "y":1, "label":"P"}, {"x":11.5, "y":1, "label":"{"}, {"x":12.5, "y":1, "label":"}"}, {"x":13.5, "y":1, "label":"|", "w":1.5}, + {"x":0, "y":2, "label":"Caps Lock", "w":1.75}, {"x":1.75, "y":2, "label":"A"}, {"x":2.75, "y":2, "label":"S"}, {"x":3.75, "y":2, "label":"D"}, {"x":4.75, "y":2, "label":"F"}, {"x":5.75, "y":2, "label":"G"}, {"x":6.75, "y":2, "label":"H"}, {"x":7.75, "y":2, "label":"J"}, {"x":8.75, "y":2, "label":"K"}, {"x":9.75, "y":2, "label":"L"}, {"x":10.75, "y":2, "label":":"}, {"x":11.75, "y":2, "label":"\""}, {"x":12.75, "y":2, "label":"Enter", "w":2.25}, + {"x":0, "y":3, "label":"Shift", "w":2.25}, {"x":2.25, "y":3, "label":"Z"}, {"x":3.25, "y":3, "label":"X"}, {"x":4.25, "y":3, "label":"C"}, {"x":5.25, "y":3, "label":"V"}, {"x":6.25, "y":3, "label":"B"}, {"x":7.25, "y":3, "label":"N"}, {"x":8.25, "y":3, "label":"M"}, {"x":9.25, "y":3, "label":"<"}, {"x":10.25, "y":3, "label":">"}, {"x":11.25, "y":3, "label":"?"}, {"x":12.25, "y":3, "label":"Shift", "w":2.75}, + {"x":0, "y":4, "label":"Ctrl", "w":1.25}, {"x":1.25, "y":4, "label":"Win", "w":1.25}, {"x":2.5, "y":4, "label":"Alt", "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "label":"Alt", "w":1.25}, {"x":11.25, "y":4, "label":"Win", "w":1.25}, {"x":12.5, "y":4, "label":"Menu", "w":1.25}, {"x":13.75, "y":4, "label":"Ctrl", "w":1.25}] }, "LAYOUT_60_iso": { - "layout": [{"label":"\u00ac", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] + "layout": [ + {"label":"\u00ac", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, + {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, + {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] }, "LAYOUT_60_ansi_split_bs_rshift": { - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":6}, {"label":"Alt", "x":10, "y":4, "w":1.5}, {"label":"Win", "x":11.5, "y":4}, {"label":"Menu", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}] + "layout": [ + {"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, + {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, + {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":6}, {"label":"Alt", "x":10, "y":4, "w":1.5}, {"label":"Win", "x":11.5, "y":4}, {"label":"Menu", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}] }, + + "LAYOUT_60_ansi_split_rshift": { + "layout": [ + {"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0, "w":2}, + {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, + {"label":"Esc", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Alt", "x":1.25, "y":4, "w": 1.25}, {"label":"Gui", "x":2.5, "y":4, "w":1.25}, {"label": "Space", "x":3.75, "y":4, "w":6.25}, {"label":"Fn", "x":10, "y":4, "w":1.25}, {"label":"Gui", "x":11.25, "y":4, "w": 1.25}, {"label":"Alt", "x":12.5, "y":4, "w": 1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25} + ] + }, + + "LAYOUT_60_ansi_tsangan_split_rshift": { + "layout": [ + {"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label": "Bksp", "x":13, "y":0, "w":2}, + {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, + {"label":"Esc", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label": "Alt Gr", "x":14, "y":3}, + {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Alt", "x":1.5, "y":4}, {"label":"GUI", "x":2.5, "y":4, "w":1.5}, {"label":"space", "x":4, "y":4, "w":7}, {"label":"Fn", "x":11, "y":4, "w":1.5}, {"label":"Alt", "x":12.5, "y":4}, {"label":"GUI", "x":13.5, "y":4, "w": 1.5} + ] + }, + "LAYOUT_60_hhkb": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Delete", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}] + "layout": [ + {"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, + {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Delete", "x":13.5, "y":1, "w":1.5}, + {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, + {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}] } } } diff --git a/keyboards/1upkeyboards/1up60rgb/keymaps/badger/keymap.c b/keyboards/1upkeyboards/1up60rgb/keymaps/badger/keymap.c new file mode 100644 index 000000000000..5229657bc6bd --- /dev/null +++ b/keyboards/1upkeyboards/1up60rgb/keymaps/badger/keymap.c @@ -0,0 +1,59 @@ +/* +Copyright 2020 Dan White +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "badger.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY_MAC] = LAYOUT_60_ansi_tsangan_split_rshift(\ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + MOVE_MAC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, CFG_MAC, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, ADJUST, KC_RALT, KC_RGUI), + + [_MOVE_MAC] = LAYOUT_60_ansi_tsangan_split_rshift(\ + MAC_FRC, MM_LEFT, MM_RGHT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_0, IJ_TOP, IJ_BOTT, KC_DEL, \ + KC_BACK, IJ_STEP, IJ_INTO, IJ_OUT, IJ_RUN, IJ_STOP, _______, WD_BACK, KC_HOME, KC_END, WD_FRWD, IJ_BACK, IJ_FWD, KC_NEXT, \ + _______, MM_LH, MM_MAX, MM_RH, IJ_FIND, IJ_IMPS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, CM_RIGHT, CM_DOWN, _______, \ + _______, MM_UH, MM_BH, MAC_CPY, MAC_PST, IJ_IMPH, _______, IJ_REN, IJ_IMPL, IJ_DECL, IJ_USAG, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______), + + [_QWERTY_LINUX] = LAYOUT_60_ansi_tsangan_split_rshift(\ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + MOVE, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, CFG_LNX, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, ADJUST, KC_LALT, KC_RGUI), + + [_MOVE_LINUX] = LAYOUT_60_ansi_tsangan_split_rshift(\ + KC_GRV, VD_1, VD_2, VD_3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_BACK, WM_VD1, WM_UH, WM_VD2, RESET, KC_MSTP, KC_MPLY, KC_PGUP, KC_HOME, KC_END, KC_PGDN, _______, _______, KC_NEXT, \ + _______, WM_LH, WM_MAX, WM_RH, WD_FRWD, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, CS_RIGHT, CS_DOWN, _______, \ + _______, WM_VD3, WM_BH, OS_COPY, OS_PAST, WD_BACK, KC_MNXT, KC_MUTE, KC_WBAK, KC_WFWD, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______), + + [_ADJUST] = LAYOUT_60_ansi_tsangan_split_rshift(\ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + _______, _______, _______, _______, KC_WREF, KC_MSTP, KC_MPLY, KC_PGUP, _______, _______, KC_PGDN, KC_VOLD, KC_VOLU, KC_INS, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, DF_1, DF_2, KC_CAPS, _______, KC_MPRV, KC_MNXT, KC_MUTE, KC_WBAK, KC_WFWD, KC_WSCH, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______), + + [_CONFIG] = LAYOUT_60_ansi_tsangan_split_rshift(\ + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + _______, NK_ON, NK_OFF, EEP_RST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, \ + _______, GE_SWAP, GE_NORM, DEBUG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_SPI, RGB_M_B, _______, _______, RGB_TOG, _______, \ + _______, LAG_SWP, LAG_NRM, _______, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_SPD, RGB_M_K, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______) +}; + diff --git a/keyboards/40percentclub/mf68/keymaps/delivrance/config.h b/keyboards/40percentclub/mf68/keymaps/delivrance/config.h new file mode 100644 index 000000000000..7ae880576586 --- /dev/null +++ b/keyboards/40percentclub/mf68/keymaps/delivrance/config.h @@ -0,0 +1,42 @@ +/* + * Dan's Magicforce 68 (MF68) QMK Keyboard + * Copyright (C) Dan + * + * This file is part of Dan's MF68 QMK Keyboard. + * + * Dan's MF68 QMK Keyboard is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * Dan's MF68 QMK Keyboard is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with Dan's MF68 QMK Keyboard. If not, see . + */ + +#pragma once + +#undef MANUFACTURER +#define MANUFACTURER Dan + +#undef PRODUCT +#define PRODUCT Magicforce 68 QMK + +#undef BACKLIGHT_LEVELS +#define BACKLIGHT_LEVELS 20 + +// Disable backlight breathing +#undef BACKLIGHT_BREATHING + +// Set USB polling rate to 1000 Hz +#define USB_POLLING_INTERVAL_MS 1 + +// Enable NKRO on boot +#define FORCE_NKRO + +// Backlight idle timeout in seconds +#define BACKLIGHT_IDLE_TIMEOUT 1200 \ No newline at end of file diff --git a/keyboards/40percentclub/mf68/keymaps/delivrance/keymap.c b/keyboards/40percentclub/mf68/keymaps/delivrance/keymap.c new file mode 100644 index 000000000000..6f9179926c02 --- /dev/null +++ b/keyboards/40percentclub/mf68/keymaps/delivrance/keymap.c @@ -0,0 +1,232 @@ +/* + * Dan's Magicforce 68 (MF68) QMK Keyboard + * Copyright (C) Dan + * + * This file is part of Dan's MF68 QMK Keyboard. + * + * Dan's MF68 QMK Keyboard is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * Dan's MF68 QMK Keyboard is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with Dan's MF68 QMK Keyboard. If not, see . + */ + +#include QMK_KEYBOARD_H + +#define KC_ KC_TRNS + +#define KC_FN1 MO(_FN) +#define KC_FN2 LT(_FN, KC_CAPS) + +#define KC_BLUP BL_INC // Backlight increase +#define KC_BLDN BL_DEC // Backlight decrease +#define KC_BLTOG BL_TOGG // Backlight toggle +#define KC_TERM TERM_ON // Terminal mode on +#define KC_REC1 DM_REC1 // Record macro 1 +#define KC_PLY1 DM_PLY1 // Play macro 1 +#define KC_REC2 DM_REC2 // Record macro 2 +#define KC_PLY2 DM_PLY2 // Play macro 1 +#define KC_RSTP DM_RSTP // Stop macro recording + +enum { + _QWERTY, + _FN +}; + +/* ┏━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━━━━━┓ ┏━━━━┳━━━━┓ + ┃Esc ┃ 1! ┃ 2@ ┃ 3# ┃ 4$ ┃ 5% ┃ 6^ ┃ 7& ┃ 8* ┃ 9( ┃ 0) ┃ -_ ┃ =+ ┃ ←─ ┃ ┃Ins ┃PgUp┃ + ┣━━━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━━━━━┫ ┣━━━━╋━━━━┫ + ┃ Tab ┃ Q ┃ W ┃ E ┃ R ┃ T ┃ Y ┃ U ┃ I ┃ O ┃ P ┃ [{ ┃ ]} ┃ \| ┃ ┃Del ┃PgDn┃ + ┣━━━━━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━━━━━━┫ ┗━━━━┻━━━━┛ + ┃ Caps ┃ A ┃ S ┃ D ┃ F ┃ G ┃ H ┃ J ┃ K ┃ L ┃ ;: ┃ '" ┃ Enter ┃ Magicforce + ┣━━━━━━━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━━━━━━━━━┫ ┏━━━━┓ + ┃ Shift ┃ Z ┃ X ┃ C ┃ V ┃ B ┃ N ┃ M ┃ ,< ┃ .> ┃ /? ┃ Shift ┃ ┃ ↑ ┃ Dan + ┣━━━━━┳━━━━┻┳━━━┻━┳━━┻━━━━┻━━━━┻━━━━┻━━━━┻━━━━┻━━━┳┻━━━━╋━━━━┻┳━━━━━┳━━┳━━┻━╋━━━━╋━━━━┓ + ┃Ctrl ┃ GUI ┃ Alt ┃ ━━━━━ ┃ Alt ┃ Fn ┃Ctrl ┃ ┃ ← ┃ ↓ ┃ → ┃ + ┗━━━━━┻━━━━━┻━━━━━┻━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┻━━━━━┻━━━━━┻━━━━━┛ ┗━━━━┻━━━━┻━━━━┛ */ + +// clang-format off +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_QWERTY] = LAYOUT_kc( /* Default layer + ┏━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━━━━━┓ ┏━━━━┳━━━━┓ */ + GESC, 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 ,MINS,EQL , BSPC , INS ,PGUP, /* + ┣━━━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━━━━━┫ ┣━━━━╋━━━━┫ */ + TAB , Q , W , E , R , T , Y , U , I , O , P ,LBRC,RBRC, BSLS , DEL ,PGDN, /* + ┣━━━━━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━━━━━━┫ ┗━━━━┻━━━━┛ */ + FN2 , A , S , D , F , G , H , J , K , L ,SCLN,QUOT, ENTER , /* + ┣━━━━━━━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━━━━━━━━━┫ ┏━━━━┓ */ + LSFT , Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, RSFT , UP , /* + ┣━━━━━┳━━━━┻┳━━━┻━┳━━┻━━━━┻━━━━┻━━━━┻━━━━┻━━━━┻━━━┳┻━━━━╋━━━━┻┳━━━━━┳━━┳━━┻━╋━━━━╋━━━━┓ */ + LCTL ,LGUI ,LALT , SPACE ,RALT , FN1 ,RCTL , LEFT,DOWN,RGHT /* + ┗━━━━━┻━━━━━┻━━━━━┻━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┻━━━━━┻━━━━━┻━━━━━┛ ┗━━━━┻━━━━┻━━━━┛ */), + +[_FN] = LAYOUT_kc( /* FN & CAPS layer + ┏━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━━━━━┓ ┏━━━━┳━━━━┓ */ + GRV , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 , F10, F11, F12, RSTP , PSCR,HOME, /* + ┣Esc ┻ 1! ┻ 2@ ┻ 3# ┻ 4$ ┻ 5% ┻ 6^ ┻ 7& ┻ 8* ┻ 9( ┻ 0) ┻ -_ ┻ =+ ┻━┳━ ←─ ━┫ ┣Ins ╋PgUp┫ */ + ,PLY1,PLY2, , , , , , 7 , 8 , 9 ,BLDN,BLUP,BLTOG , ,END , /* + ┣ Tab ━┻ Q ━┻ W ━┻ E ━┻ R ━┻ T ━┻ Y ━┻ U ━┻ I ━┻ O ━┻ P ━┻ [{ ┻ ]} ┻━ \| ━┫ ┗Del ┻PgDn┛ */ + , , , , , , , , 4 , 5 , 6 , , TERM , /* + ┣━ Caps ━┻ A ━┻ S ━┻ D ━┻ F ━┻ G ━┻ H ━┻ J ━┻ K ━┻ L ━┻ ;: ┻ '" ┻━ Enter ━┫ ┏━━━━┓ */ + ,REC1,REC2, , ,MSTP, ,MUTE, 1 , 2 , 3 , , VOLU, /* + ┣━━ Shift ━┻ Z ━┻ X ━┻ C ━┻ V ━┻ B ━┻ N ━┻ M ━┻ ,< ┻ .> ╋ /? ┻┳━━ Shift ━━┻━╋ ↑ ━╋━━━━┓ */ + , , , MPLY , 0 , , , MPRV,VOLD,MNXT /* + ┗Ctrl ┻ GUI ┻ Alt ┻━━━━━━━━━━━━ Space ━━━━━━━━━━━━┻ Alt ┻ Fn ━┻Ctrl ┛ ┗ ← ━┻ ↓ ━┻ → ━┛ */) +}; +// clang-format on + +// Initialization code +// ------------------- + +void keyboard_post_init_user(void) { + backlight_level(2); +} + +// Custom backlight driver +// ----------------------- + +// http://jared.geek.nz/2013/feb/linear-led-pwm +float cie1931(float x) { + x *= 100.0 / BACKLIGHT_LEVELS; + float y; + + if (x < 8) { + y = x / 902.3; + } else { + y = (x + 16.0) / 116.0; + y = y * y * y; + } + + return round(y * 255); +} + +void backlight_init_ports(void) { + setPinOutput(BACKLIGHT_PIN); + writePinLow(BACKLIGHT_PIN); + + TCCR1A = _BV(COM1A1) | _BV(WGM11); + TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); + + ICR1 = 0xFFU; // Set PWM levels to 255 (enables high-frequency PWM) +} + +void backlight_set(uint8_t level) { + if (level > BACKLIGHT_LEVELS) { + level = BACKLIGHT_LEVELS; + } + + if (level == 0) { + TCCR1A &= ~(_BV(COM1A1)); // Disable PWM + } else { + TCCR1A |= _BV(COM1A1); // Enable PWM + } + + OCR1A = cie1931(level); +} + +// Custom macro hooks +// ------------------ + +// Redefine with lower delay +void led_blink(void) { + backlight_toggle(); + wait_ms(25); + backlight_toggle(); +} + +void dynamic_macro_record_start_user(void) { + led_blink(); +} + +void dynamic_macro_play_user(int8_t direction) { + led_blink(); +} + +void dynamic_macro_record_key_user(int8_t direction, keyrecord_t *record) { + led_blink(); +} + +void dynamic_macro_record_end_user(int8_t direction) { + led_blink(); +} + +// Custom Caps Lock backlight behaviour +// ------------------------------------ + +void led_set_user(uint8_t usb_led) { + // This exists because I don't like the backlight to turn OFF when the Caps Lock is ON. + // That is, this will turn the backlight ON (at half the brightness) when the Caps Lock is ON as well. + static bool prev_is_caps_on; + bool is_caps_on = IS_LED_ON(usb_led, USB_LED_CAPS_LOCK); + + if (prev_is_caps_on != is_caps_on) { + prev_is_caps_on = is_caps_on; + + if (is_caps_on) { + backlight_set(BACKLIGHT_LEVELS / 2); + } else { + if (is_backlight_enabled()) { + backlight_set(get_backlight_level()); + } else { + backlight_set(0); + } + } + } + + // Turn on the Pro Micro's on-board LEDs for Caps Lock + if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { + // Set to low + setPinOutput(B0); + writePinLow(B0); + setPinOutput(D5); + writePinLow(D5); + } else { + // Set to Hi-Z + setPinInput(B0); + setPinInput(D5); + } +} + +// Backlight idle timeout feature +// ------------------------------ + +static uint32_t timer; +static bool is_idle; + +void matrix_scan_user() { + // Check the timer only if the keyboard is not idle + if (!is_idle) { + if (timer_elapsed32(timer) >= (uint32_t) BACKLIGHT_IDLE_TIMEOUT * 1000) { + is_idle = true; + + // Both backlight_level and backlight_level_noeeprom modify the global backlight config (not useful) + // Instead, use backlight_set in order to restore the current backlight level later on + backlight_set(0); + } + } +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + // Reset timer on each keypress + timer = timer_read32(); + + // Enable backlight back only when keyboard is idling (which implies the backlight was turned off previously) + if (is_idle) { + is_idle = false; + + // Set back the original backlight level only if it is actually enabled globally + if (is_backlight_enabled()) { + // The current backlight level can be obtained with get_backlight_level + backlight_set(get_backlight_level()); + } + } + + return true; +} diff --git a/keyboards/40percentclub/mf68/keymaps/delivrance/readme.md b/keyboards/40percentclub/mf68/keymaps/delivrance/readme.md new file mode 100644 index 000000000000..158235b5ef30 --- /dev/null +++ b/keyboards/40percentclub/mf68/keymaps/delivrance/readme.md @@ -0,0 +1,38 @@ +# Dan's Magicforce 68 (MF68) QMK Keyboard + +> https://github.com/delivrance + +``` +┏━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━┳━━━━━━━━┓ ┏━━━━┳━━━━┓ +┃Esc ┃ 1! ┃ 2@ ┃ 3# ┃ 4$ ┃ 5% ┃ 6^ ┃ 7& ┃ 8* ┃ 9( ┃ 0) ┃ -_ ┃ =+ ┃ ←─ ┃ ┃Ins ┃PgUp┃ +┣━━━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━━━━━┫ ┣━━━━╋━━━━┫ +┃ Tab ┃ Q ┃ W ┃ E ┃ R ┃ T ┃ Y ┃ U ┃ I ┃ O ┃ P ┃ [{ ┃ ]} ┃ \| ┃ ┃Del ┃PgDn┃ +┣━━━━━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━━━━━━┫ ┗━━━━┻━━━━┛ +┃ Caps ┃ A ┃ S ┃ D ┃ F ┃ G ┃ H ┃ J ┃ K ┃ L ┃ ;: ┃ '" ┃ Enter ┃ Magicforce +┣━━━━━━━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━┳━━┻━━━━━━━━━┫ ┏━━━━┓ +┃ Shift ┃ Z ┃ X ┃ C ┃ V ┃ B ┃ N ┃ M ┃ ,< ┃ .> ┃ /? ┃ Shift ┃ ┃ ↑ ┃ Dan +┣━━━━━┳━━━━┻┳━━━┻━┳━━┻━━━━┻━━━━┻━━━━┻━━━━┻━━━━┻━━━┳┻━━━━╋━━━━┻┳━━━━━┳━━┳━━┻━╋━━━━╋━━━━┓ +┃Ctrl ┃ GUI ┃ Alt ┃ ━━━━━ ┃ Alt ┃ Fn ┃Ctrl ┃ ┃ ← ┃ ↓ ┃ → ┃ +┗━━━━━┻━━━━━┻━━━━━┻━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┻━━━━━┻━━━━━┻━━━━━┛ ┗━━━━┻━━━━┻━━━━┛ +``` + +## Features + +- Right ALT and FN keys swapped. +- USB Polling rate set to 1000 Hz (1 ms). +- Dynamic macros enabled (2 macros). +- Transient EEPROM to avoid wearing (r/w from/to RAM). +- NKRO enabled on boot (up to 248 keys at once). +- CAPS LOCK key used as alias to the FN key. +- Pro Micro's on-board LEDs used for CAPS LOCK status. +- Backlight also used as CAPS LOCK status indicator. +- Both Grave and Tilde characters embedded in ESC. +- Media control keys and extra number keys (numpad). +- Flicker-free backlight thanks to high-frequency PWM mode. +- Linear backlight brightness intensity (better for human eyes). +- Backlight turns off automatically after 20 minutes idle. +- Backlight brightness levels set to 20 (5% steps) + 1 (off). +- Backlight breathing completely disabled. +- Link Time Optimizations to reduce compiled size. +- QMK Terminal enabled for fun (pretty useless in practice). +- Performing ~1550 matrix scans per second. diff --git a/keyboards/40percentclub/mf68/keymaps/delivrance/rules.mk b/keyboards/40percentclub/mf68/keymaps/delivrance/rules.mk new file mode 100644 index 000000000000..5ac2ce5ccbfc --- /dev/null +++ b/keyboards/40percentclub/mf68/keymaps/delivrance/rules.mk @@ -0,0 +1,10 @@ +BACKLIGHT_DRIVER = custom +NKRO_ENABLE = yes +TERMINAL_ENABLE = yes +DYNAMIC_MACRO_ENABLE = yes + +# Use RAM (fake EEPROM, transient) instead of real EEPROM +EEPROM_DRIVER = transient + +# LTO: Link Time Optimizations. Reduce compiled size +LTO_ENABLE = yes \ No newline at end of file diff --git a/keyboards/ai03/soyuz/config.h b/keyboards/ai03/soyuz/config.h index 213b6509b4d4..feb55107c3f3 100644 --- a/keyboards/ai03/soyuz/config.h +++ b/keyboards/ai03/soyuz/config.h @@ -21,11 +21,10 @@ along with this program. If not, see . /* USB Device descriptor parameter */ #define VENDOR_ID 0xA103 -#define PRODUCT_ID 0x0004 +#define PRODUCT_ID 0x0018 #define DEVICE_VER 0x0001 #define MANUFACTURER ai03 Design Studio #define PRODUCT Soyuz -#define DESCRIPTION Single-PCB Numpad Kit /* key matrix size */ #define MATRIX_ROWS 5 @@ -118,59 +117,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -189,29 +135,6 @@ along with this program. If not, see . //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 // #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/ai03/soyuz/keymaps/mrsendyyk/keymap.c b/keyboards/ai03/soyuz/keymaps/mrsendyyk/keymap.c index a1d2596a6ac7..0b9793484f66 100644 --- a/keyboards/ai03/soyuz/keymaps/mrsendyyk/keymap.c +++ b/keyboards/ai03/soyuz/keymaps/mrsendyyk/keymap.c @@ -1,9 +1,31 @@ +/* Copyright (C) 2020 Sendy YK (https://mr.sendyyk.com). + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + #include QMK_KEYBOARD_H +enum layer_names { + _BASE +}; + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_numpad_5x4(KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, - KC_P7, KC_P8, KC_P9, - KC_P4, KC_P5, KC_P6, KC_PPLS, - KC_P1, KC_P2, KC_P3, - KC_P0, KC_PDOT, KC_PENT) + [_BASE] = LAYOUT_numpad_5x4( + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, + KC_P0, KC_PDOT, KC_PENT + ) }; diff --git a/keyboards/ai03/soyuz/keymaps/mrsendyyk/readme.md b/keyboards/ai03/soyuz/keymaps/mrsendyyk/readme.md index e1f1b7ce36ee..0e5007e6fa9f 100644 --- a/keyboards/ai03/soyuz/keymaps/mrsendyyk/readme.md +++ b/keyboards/ai03/soyuz/keymaps/mrsendyyk/readme.md @@ -1,6 +1,14 @@ -# [Sendy YK's Keymap](https://github.com/mrsendyyk/my_qmk/tree/master/ai03_soyuz_numpad) +# Sendy YK's Numpad 5x4 Layout and Keymap -![Default Layer [0]](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/ai03_soyuz_numpad/assets/ai03_soyuz_mrsendyyk.png) +[https://mr.sendyyk.com](https://mr.sendyyk.com) + +## Numpad 5x4 Layout + +![LAYOUT_numpad_5x4](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/soyuz/assets/layout-numpad-5x4.png) + +## Keymap + +![_BASE](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/soyuz/assets/layout-numpad-5x4-keymap.png) ## Build The Firmware diff --git a/keyboards/ai03/soyuz/keymaps/via/keymap.c b/keyboards/ai03/soyuz/keymaps/via/keymap.c new file mode 100644 index 000000000000..9b62ca21725d --- /dev/null +++ b/keyboards/ai03/soyuz/keymaps/via/keymap.c @@ -0,0 +1,59 @@ +/* Copyright (C) 2020 Sendy YK (https://mr.sendyyk.com). + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum layer_names { + _BASE, // Default Layer + _FN, // Fn Layer 1 + _FN2, // Fn Layer 2 + _FN3 // Fn Layer 3 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + // Default Layer + [_BASE] = LAYOUT_ortho_5x4( + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, KC_PENT, + KC_P0, KC_P0, KC_PDOT, KC_PENT + ), + // Fn Layer 1 + [_FN] = LAYOUT_ortho_5x4( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + // Fn Layer 2 + [_FN2] = LAYOUT_ortho_5x4( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + // Fn Layer 3 + [_FN3] = LAYOUT_ortho_5x4( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/ai03/soyuz/keymaps/via/rules.mk b/keyboards/ai03/soyuz/keymaps/via/rules.mk new file mode 100644 index 000000000000..1e5b99807cb7 --- /dev/null +++ b/keyboards/ai03/soyuz/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/basekeys/slice/config.h b/keyboards/basekeys/slice/config.h index cfb6bf4ffccd..e7e65de3b9d6 100644 --- a/keyboards/basekeys/slice/config.h +++ b/keyboards/basekeys/slice/config.h @@ -1,6 +1,5 @@ /* -Copyright 2012 Jun Wako -Copyright 2015 Jack Humbert +Copyright 2020 2Moons This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -15,7 +14,6 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ - #pragma once #include "config_common.h" diff --git a/keyboards/basekeys/slice/keymaps/default/config.h b/keyboards/basekeys/slice/keymaps/default/config.h index d3acebb7e35f..3dc07fdac1d2 100644 --- a/keyboards/basekeys/slice/keymaps/default/config.h +++ b/keyboards/basekeys/slice/keymaps/default/config.h @@ -1,19 +1,19 @@ -/* Copyright 2020 2Moons - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ +/* +Copyright 2020 2Moons +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ #pragma once /* Select hand configuration */ diff --git a/keyboards/basekeys/slice/keymaps/default/keymap.c b/keyboards/basekeys/slice/keymaps/default/keymap.c index d6e5cefaee78..ffb64998e269 100644 --- a/keyboards/basekeys/slice/keymaps/default/keymap.c +++ b/keyboards/basekeys/slice/keymaps/default/keymap.c @@ -1,3 +1,18 @@ +/* Copyright 2020 2Moons + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ #include QMK_KEYBOARD_H #include "split_util.h" // Each layer gets a name for readability, which is then used in the keymap matrix below. diff --git a/keyboards/basekeys/slice/keymaps/default_split_left_space/config.h b/keyboards/basekeys/slice/keymaps/default_split_left_space/config.h index d3acebb7e35f..3dc07fdac1d2 100644 --- a/keyboards/basekeys/slice/keymaps/default_split_left_space/config.h +++ b/keyboards/basekeys/slice/keymaps/default_split_left_space/config.h @@ -1,19 +1,19 @@ -/* Copyright 2020 2Moons - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ +/* +Copyright 2020 2Moons +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ #pragma once /* Select hand configuration */ diff --git a/keyboards/basekeys/slice/keymaps/default_split_left_space/keymap.c b/keyboards/basekeys/slice/keymaps/default_split_left_space/keymap.c index 40d55bdc63fe..331dfc0fe435 100644 --- a/keyboards/basekeys/slice/keymaps/default_split_left_space/keymap.c +++ b/keyboards/basekeys/slice/keymaps/default_split_left_space/keymap.c @@ -1,3 +1,18 @@ +/* Copyright 2020 2Moons + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ #include QMK_KEYBOARD_H #include "split_util.h" // Each layer gets a name for readability, which is then used in the keymap matrix below. diff --git a/keyboards/basekeys/slice/rev1/config.h b/keyboards/basekeys/slice/rev1/config.h index d151d5873fa9..ea4d5d3dc3b4 100644 --- a/keyboards/basekeys/slice/rev1/config.h +++ b/keyboards/basekeys/slice/rev1/config.h @@ -1,6 +1,5 @@ /* -Copyright 2012 Jun Wako -Copyright 2015 Jack Humbert +Copyright 2020 2Moons This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/keyboards/basekeys/slice/rev1/keymaps/2moons/config.h b/keyboards/basekeys/slice/rev1/keymaps/2moons/config.h index 62ee1d1a9018..8f38938b10da 100644 --- a/keyboards/basekeys/slice/rev1/keymaps/2moons/config.h +++ b/keyboards/basekeys/slice/rev1/keymaps/2moons/config.h @@ -1,19 +1,19 @@ -/* Copyright 2020 2Moons - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ +/* +Copyright 2020 2Moons +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ #pragma once /* Select hand configuration */ diff --git a/keyboards/basekeys/slice/rev1/keymaps/2moons/keymap.c b/keyboards/basekeys/slice/rev1/keymaps/2moons/keymap.c index 5a9b14606d6f..97f7039a79cd 100644 --- a/keyboards/basekeys/slice/rev1/keymaps/2moons/keymap.c +++ b/keyboards/basekeys/slice/rev1/keymaps/2moons/keymap.c @@ -1,3 +1,18 @@ +/* Copyright 2020 2Moons + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ #include QMK_KEYBOARD_H #include "keymap_jp.h" diff --git a/keyboards/basekeys/slice/rev1/keymaps/default_all/config.h b/keyboards/basekeys/slice/rev1/keymaps/default_all/config.h index d3acebb7e35f..3dc07fdac1d2 100644 --- a/keyboards/basekeys/slice/rev1/keymaps/default_all/config.h +++ b/keyboards/basekeys/slice/rev1/keymaps/default_all/config.h @@ -1,19 +1,19 @@ -/* Copyright 2020 2Moons - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ +/* +Copyright 2020 2Moons +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ #pragma once /* Select hand configuration */ diff --git a/keyboards/basekeys/slice/rev1/keymaps/default_all/keymap.c b/keyboards/basekeys/slice/rev1/keymaps/default_all/keymap.c index 198c449b7ff4..34e1b7c43adb 100644 --- a/keyboards/basekeys/slice/rev1/keymaps/default_all/keymap.c +++ b/keyboards/basekeys/slice/rev1/keymaps/default_all/keymap.c @@ -1,3 +1,18 @@ +/* Copyright 2020 2Moons + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ #include QMK_KEYBOARD_H extern uint8_t is_master; diff --git a/keyboards/basekeys/slice/rev1/keymaps/default_split_backspace/config.h b/keyboards/basekeys/slice/rev1/keymaps/default_split_backspace/config.h index d3acebb7e35f..3dc07fdac1d2 100644 --- a/keyboards/basekeys/slice/rev1/keymaps/default_split_backspace/config.h +++ b/keyboards/basekeys/slice/rev1/keymaps/default_split_backspace/config.h @@ -1,19 +1,19 @@ -/* Copyright 2020 2Moons - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ +/* +Copyright 2020 2Moons +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ #pragma once /* Select hand configuration */ diff --git a/keyboards/basekeys/slice/rev1/keymaps/default_split_backspace/keymap.c b/keyboards/basekeys/slice/rev1/keymaps/default_split_backspace/keymap.c index b1423378ef9b..772f9f6f1f2c 100644 --- a/keyboards/basekeys/slice/rev1/keymaps/default_split_backspace/keymap.c +++ b/keyboards/basekeys/slice/rev1/keymaps/default_split_backspace/keymap.c @@ -1,3 +1,18 @@ +/* Copyright 2020 2Moons + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ #include QMK_KEYBOARD_H extern uint8_t is_master; diff --git a/keyboards/basekeys/slice/rev1/keymaps/via/config.h b/keyboards/basekeys/slice/rev1/keymaps/via/config.h new file mode 100644 index 000000000000..3dc07fdac1d2 --- /dev/null +++ b/keyboards/basekeys/slice/rev1/keymaps/via/config.h @@ -0,0 +1,22 @@ +/* +Copyright 2020 2Moons + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#pragma once + +/* Select hand configuration */ + +#define TAPPING_FORCE_HOLD +#define TAPPING_TERM 180 diff --git a/keyboards/basekeys/slice/rev1/keymaps/via/keymap.c b/keyboards/basekeys/slice/rev1/keymaps/via/keymap.c new file mode 100644 index 000000000000..900f1b3ba706 --- /dev/null +++ b/keyboards/basekeys/slice/rev1/keymaps/via/keymap.c @@ -0,0 +1,85 @@ +/* Copyright 2020 2Moons + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H +#include "keymap_jp.h" +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum layer_number { + _QWERTY = 0, + _FN, + _LOWER, + _RAISE, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY] = LAYOUT_all( + //,------------------------------------------------------------------------| |--------------------------------------------------------------------------------------. + KC_ESC, KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPACE, KC_BSPACE, KC_BSPACE, + //|------------------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+----------+----------+----------| + RGB_MODE_FORWARD, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + //|------------------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+----------+----------+----------| + RGB_MODE_GRADIENT, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + //|------------------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+----------+----------+----------| + RGB_MODE_XMAS, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_RSFT, + //|------------------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+----------+----------+----------| + RGB_TOG, KC_LCTL, KC_LALT, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RCTL, MO(_FN) + //`------------------------------------------------------------------------| |--------------------------------------------------------------------------------------' + ), + + [_FN] = LAYOUT_all( + //,------------------------------------------------------------------------| |--------------------------------------------------------------------------------------. + KC_ESC, KC_GRAVE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_BSPACE, KC_DEL, + //|------------------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+----------+----------+----------| + _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUSE, KC_UP, _______, _______, _______, + //|------------------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+----------+----------+----------| + _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_LEFT,KC_RIGHT, _______, _______, + //|------------------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+----------+----------+----------| + _______, _______, _______, _______, _______, _______, _______, _______, KC_END, KC_PGDN, KC_DOWN, _______, _______, _______, _______, _______, + //|------------------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+----------+----------+----------| + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + //`------------------------------------------------------------------------| |--------------------------------------------------------------------------------------' + ), + + [_LOWER] = LAYOUT_all( + //,------------------------------------------------------------------------| |--------------------------------------------------------------------------------------. + KC_ESC, KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPACE, KC_BSPACE, KC_BSPACE, + //|------------------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+----------+----------+----------| + RGB_MODE_FORWARD, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + //|------------------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+----------+----------+----------| + RGB_MODE_GRADIENT, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + //|------------------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+----------+----------+----------| + RGB_MODE_XMAS, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_RSFT, + //|------------------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+----------+----------+----------| + RGB_TOG, KC_LCTL, KC_LALT, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RCTL, MO(_FN) + //`------------------------------------------------------------------------| |--------------------------------------------------------------------------------------' + ), + + [_RAISE] = LAYOUT_all( + //,------------------------------------------------------------------------| |--------------------------------------------------------------------------------------. + KC_ESC, KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPACE, KC_BSPACE, KC_BSPACE, + //|------------------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+----------+----------+----------| + RGB_MODE_FORWARD, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + //|------------------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+----------+----------+----------| + RGB_MODE_GRADIENT, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + //|------------------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+----------+----------+----------| + RGB_MODE_XMAS, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_RSFT, + //|------------------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+----------+----------+----------| + RGB_TOG, KC_LCTL, KC_LALT, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RCTL, MO(_FN) + //`------------------------------------------------------------------------| |--------------------------------------------------------------------------------------' + ) +}; diff --git a/keyboards/basekeys/slice/rev1/keymaps/via/rules.mk b/keyboards/basekeys/slice/rev1/keymaps/via/rules.mk new file mode 100644 index 000000000000..fe10d4e09326 --- /dev/null +++ b/keyboards/basekeys/slice/rev1/keymaps/via/rules.mk @@ -0,0 +1,3 @@ +TAP_DANCE_ENABLE = no +VIA_ENABLE = yes +BACKLIGHT_ENABLE = no \ No newline at end of file diff --git a/keyboards/basekeys/slice/rev1/rev1.c b/keyboards/basekeys/slice/rev1/rev1.c index 520a869e57ba..a3c8f66fe098 100644 --- a/keyboards/basekeys/slice/rev1/rev1.c +++ b/keyboards/basekeys/slice/rev1/rev1.c @@ -1 +1,16 @@ +/* Copyright 2020 2Moons + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ #include "rev1.h" diff --git a/keyboards/basekeys/slice/rev1/rev1.h b/keyboards/basekeys/slice/rev1/rev1.h index ae417d99c7b3..26a5da31bcf6 100644 --- a/keyboards/basekeys/slice/rev1/rev1.h +++ b/keyboards/basekeys/slice/rev1/rev1.h @@ -1,3 +1,18 @@ +/* Copyright 2020 2Moons + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ #pragma once #include "slice.h" diff --git a/keyboards/basekeys/slice/rev1_rgb/config.h b/keyboards/basekeys/slice/rev1_rgb/config.h index 1145d086470c..08afff765ae0 100644 --- a/keyboards/basekeys/slice/rev1_rgb/config.h +++ b/keyboards/basekeys/slice/rev1_rgb/config.h @@ -1,6 +1,5 @@ /* -Copyright 2012 Jun Wako -Copyright 2015 Jack Humbert +Copyright 2020 2Moons This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -15,7 +14,6 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ - #pragma once /* USB Device descriptor parameter */ diff --git a/keyboards/basekeys/slice/rev1_rgb/keymaps/2moons_rgb/config.h b/keyboards/basekeys/slice/rev1_rgb/keymaps/2moons_rgb/config.h index 62ee1d1a9018..8f38938b10da 100644 --- a/keyboards/basekeys/slice/rev1_rgb/keymaps/2moons_rgb/config.h +++ b/keyboards/basekeys/slice/rev1_rgb/keymaps/2moons_rgb/config.h @@ -1,19 +1,19 @@ -/* Copyright 2020 2Moons - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ +/* +Copyright 2020 2Moons +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ #pragma once /* Select hand configuration */ diff --git a/keyboards/basekeys/slice/rev1_rgb/keymaps/2moons_rgb/keymap.c b/keyboards/basekeys/slice/rev1_rgb/keymaps/2moons_rgb/keymap.c index d9e5808a6f81..36bfb79abdd1 100644 --- a/keyboards/basekeys/slice/rev1_rgb/keymaps/2moons_rgb/keymap.c +++ b/keyboards/basekeys/slice/rev1_rgb/keymaps/2moons_rgb/keymap.c @@ -1,3 +1,18 @@ +/* Copyright 2020 2Moons + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ #include QMK_KEYBOARD_H #include "keymap_jp.h" #include "split_util.h" diff --git a/keyboards/basekeys/slice/rev1_rgb/rev1_rgb.c b/keyboards/basekeys/slice/rev1_rgb/rev1_rgb.c index 3cdec58c50dc..9ab3d2539a3a 100644 --- a/keyboards/basekeys/slice/rev1_rgb/rev1_rgb.c +++ b/keyboards/basekeys/slice/rev1_rgb/rev1_rgb.c @@ -1 +1,16 @@ +/* Copyright 2020 2Moons + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ #include "rev1_rgb.h" diff --git a/keyboards/basekeys/slice/rev1_rgb/rev1_rgb.h b/keyboards/basekeys/slice/rev1_rgb/rev1_rgb.h index 809c278db70e..31110018d357 100644 --- a/keyboards/basekeys/slice/rev1_rgb/rev1_rgb.h +++ b/keyboards/basekeys/slice/rev1_rgb/rev1_rgb.h @@ -1,3 +1,18 @@ +/* Copyright 2020 2Moons + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ #pragma once #include "slice.h" diff --git a/keyboards/basekeys/slice/slice.c b/keyboards/basekeys/slice/slice.c index 6aaf7217907a..2d7d111f9ae6 100644 --- a/keyboards/basekeys/slice/slice.c +++ b/keyboards/basekeys/slice/slice.c @@ -1 +1,16 @@ +/* Copyright 2020 2Moons + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ #include "slice.h" diff --git a/keyboards/basekeys/slice/slice.h b/keyboards/basekeys/slice/slice.h index 7d4f7ee5134c..bc3eb813a21a 100644 --- a/keyboards/basekeys/slice/slice.h +++ b/keyboards/basekeys/slice/slice.h @@ -1,3 +1,18 @@ +/* Copyright 2020 2Moons + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ #pragma once #include "quantum.h" diff --git a/keyboards/basekeys/slice/slice_font.c b/keyboards/basekeys/slice/slice_font.c index f969f85c7ab1..b59fbcf5b94e 100644 --- a/keyboards/basekeys/slice/slice_font.c +++ b/keyboards/basekeys/slice/slice_font.c @@ -1,3 +1,18 @@ +/* Copyright 2020 2Moons + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ // This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0. // See gfxfont.h for newer custom bitmap font info. diff --git a/keyboards/basekeys/trifecta/config.h b/keyboards/basekeys/trifecta/config.h new file mode 100644 index 000000000000..8a9529126013 --- /dev/null +++ b/keyboards/basekeys/trifecta/config.h @@ -0,0 +1,123 @@ +/* Copyright 2020 Swiftrax and Basekeys.com + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x04D8 +#define PRODUCT_ID 0xEAF3 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Swiftrax +#define PRODUCT Trifecta + +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 8 + +/* key matrix pins */ + +#define MATRIX_ROW_PINS { B0, B7, F7, B1, B6, C6, C7, B5, F6, D2 } +#define MATRIX_COL_PINS { F0, F1, F4, F5, D1, B2, D0, B3 } + + +#define ENCODERS_PAD_A { D4, D6, D7 } +#define ENCODERS_PAD_B { B4, D3, D5 } + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + + +#define RGB_DI_PIN E6 +#define DRIVER_LED_TOTAL 80 + +/* RGB LED */ +#ifdef RGBLIGHT_ENABLE +#define RGB_DI_PIN E6 +#define RGBLED_NUM 80 // Number of LEDs. backlight x69 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 +#define RGBLIGHT_ANIMATIONS +#endif +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Limits the brightness of the LEDS range of 255-0 (255 is default)*/ +#define RGBLIGHT_LIMIT_VAL 128 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* EEPROM for via */ +#define DYNAMIC_KEYMAP_LAYER_COUNT 3 + +/* bootmagic row col assignment */ +#define BOOTMAGIC_LITE_ROW 1 +#define BOOTMAGIC_LITE_COLUMN 0 + +#ifdef RGB_MATRIX_ENABLE +# define RGB_MATRIX_KEYPRESSES // reacts to keypresses +// # define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) +// # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +//# define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended +# define RGB_MATRIX_FRAMEBUFFER_EFFECTS +# define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness) +# define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) +# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. +# define RGB_MATRIX_HUE_STEP 8 +# define RGB_MATRIX_SAT_STEP 8 +# define RGB_MATRIX_VAL_STEP 8 +# define RGB_MATRIX_SPD_STEP 10 + +/* Disable the animations you don't want/need. You will need to disable a good number of these * + * because they take up a lot of space. Disable until you can successfully compile your firmware. */ +// # define DISABLE_RGB_MATRIX_ALPHAS_MODS +// # define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN +// # define DISABLE_RGB_MATRIX_BREATHING +// # define DISABLE_RGB_MATRIX_CYCLE_ALL +// # define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +// # define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN +// # define DISABLE_RGB_MATRIX_CYCLE_OUT_IN +// # define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +// # define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +// # define DISABLE_RGB_MATRIX_DUAL_BEACON +// # define DISABLE_RGB_MATRIX_RAINBOW_BEACON +// # define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS +// # define DISABLE_RGB_MATRIX_RAINDROPS +// # define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +// # define DISABLE_RGB_MATRIX_TYPING_HEATMAP +// # define DISABLE_RGB_MATRIX_DIGITAL_RAIN +// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE +// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define DISABLE_RGB_MATRIX_SPLASH +// # define DISABLE_RGB_MATRIX_MULTISPLASH +// # define DISABLE_RGB_MATRIX_SOLID_SPLASH +// # define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +#endif diff --git a/keyboards/basekeys/trifecta/info.json b/keyboards/basekeys/trifecta/info.json new file mode 100644 index 000000000000..3badb40d20f3 --- /dev/null +++ b/keyboards/basekeys/trifecta/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "Trifecta", + "url": "https://www.basekeys.com", + "maintainer": "Swiftrax", + "width": 18, + "height": 5.25, + "layouts": { + "LAYOUT": { + "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":8.75, "y":0}, {"label":"*", "x":9.75, "y":0}, {"label":"(", "x":10.75, "y":0}, {"label":")", "x":11.75, "y":0}, {"label":"_", "x":12.75, "y":0}, {"label":"+", "x":13.75, "y":0}, {"label":"BS", "x":14.75, "y":0}, {"x":15.75, "y":0}, {"x":17, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":8.25, "y":1}, {"label":"U", "x":9.25, "y":1}, {"label":"I", "x":10.25, "y":1}, {"label":"O", "x":11.25, "y":1}, {"label":"P", "x":12.25, "y":1}, {"label":"{", "x":13.25, "y":1}, {"label":"}", "x":14.25, "y":1}, {"label":"|", "x":15.25, "y":1, "w":1.5}, {"x":17, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":8.5, "y":2}, {"label":"J", "x":9.5, "y":2}, {"label":"K", "x":10.5, "y":2}, {"label":"L", "x":11.5, "y":2}, {"label":":", "x":12.5, "y":2}, {"label":"\"", "x":13.5, "y":2}, {"label":"Enter", "x":14.5, "y":2, "w":2.25}, {"x":17, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"x":8, "y":3}, {"label":"N", "x":9, "y":3}, {"label":"M", "x":10, "y":3}, {"label":"<", "x":11, "y":3}, {"label":">", "x":12, "y":3}, {"label":"?", "x":13, "y":3}, {"label":"Shift", "x":14, "y":3, "w":1.75}, {"x":16, "y":3.25}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":3, "y":4, "w":1.5}, {"x":4.5, "y":4, "w":2.25}, {"x":6.75, "y":4}, {"x":8.5, "y":4, "w":2.75}, {"label":"Alt", "x":11.25, "y":4, "w":1.5}, {"label":"Win", "x":13.5, "y":4, "w":1.25}, {"x":15, "y":4.25}, {"x":16, "y":4.25}, {"x":17, "y":4.25}] + } + } +} diff --git a/keyboards/basekeys/trifecta/keymaps/default/keymap.c b/keyboards/basekeys/trifecta/keymaps/default/keymap.c new file mode 100644 index 000000000000..727ebf381ae7 --- /dev/null +++ b/keyboards/basekeys/trifecta/keymaps/default/keymap.c @@ -0,0 +1,71 @@ +/* Copyright 2020 Swiftrax and Basekeys.com + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN, + _MEDIA }; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_HOME, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, MO(_MEDIA), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_RGUI, KC_RCTL, MO(_FN), KC_LEFT, KC_DOWN, KC_RGHT + ), + + [_FN] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_TOG, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, + _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END + ), + + [_MEDIA] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, + _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_TOG, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, + _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END + ) +}; + +void encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { /* First encoder */ + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } else if (index == 1) { /* Second encoder */ + if (clockwise) { + tap_code(KC_MNXT); + } else { + tap_code(KC_MPRV); + } + } else if (index == 2) { /* Third encoder */ + if (clockwise) { + tap_code(KC_RGHT); + } else { + tap_code(KC_LEFT); + } + } +} diff --git a/keyboards/basekeys/trifecta/keymaps/default/rules.mk b/keyboards/basekeys/trifecta/keymaps/default/rules.mk new file mode 100644 index 000000000000..910bd64a5967 --- /dev/null +++ b/keyboards/basekeys/trifecta/keymaps/default/rules.mk @@ -0,0 +1,2 @@ +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no \ No newline at end of file diff --git a/keyboards/basekeys/trifecta/keymaps/via/keymap.c b/keyboards/basekeys/trifecta/keymaps/via/keymap.c new file mode 100644 index 000000000000..777a9c53fbf3 --- /dev/null +++ b/keyboards/basekeys/trifecta/keymaps/via/keymap.c @@ -0,0 +1,71 @@ +/* Copyright 2020 Swiftrax and Basekeys.com + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN, + _MEDIA }; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT( + KC_ESC, RGB_TOG, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_HOME, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, MO(_MEDIA), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_RGUI, KC_RCTL, MO(_FN), KC_LEFT, KC_DOWN, KC_RGHT + ), + + [_FN] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_TOG, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, + _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END + ), + + [_MEDIA] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, + _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_TOG, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, + _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END + ) +}; + +void encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { /* First encoder */ + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } else if (index == 1) { /* Second encoder */ + if (clockwise) { + tap_code(KC_RGHT); + } else { + tap_code(KC_LEFT); + } + } else if (index == 2) { /* Third encoder */ + if (clockwise) { + rgblight_step(); + } else { + rgblight_step_reverse(); + } + } +} diff --git a/keyboards/basekeys/trifecta/keymaps/via/rules.mk b/keyboards/basekeys/trifecta/keymaps/via/rules.mk new file mode 100644 index 000000000000..32f462d06cac --- /dev/null +++ b/keyboards/basekeys/trifecta/keymaps/via/rules.mk @@ -0,0 +1,3 @@ +VIA_ENABLE = yes +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no \ No newline at end of file diff --git a/keyboards/basekeys/trifecta/readme.md b/keyboards/basekeys/trifecta/readme.md new file mode 100644 index 000000000000..efe6fb0abec6 --- /dev/null +++ b/keyboards/basekeys/trifecta/readme.md @@ -0,0 +1,17 @@ +# Trifecta + +![Trifecta](https://i.imgur.com/tlIwQowl.jpeg) + +An Alice style board with arrowkeys, based on the Fate Arisu layout. + +* Keyboard Maintainer: [swiftrax](https://github.com/swiftrax) +* Hardware Supported: Trifecta PCB, ATMEGA32U4-AU +* Hardware Availability: [Website](https://mykeyboard.eu/catalogue/) + +Make example for this keyboard (after setting up your build environment): + + make basekeys/trifecta:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs) + +[Build guide](https://www.basekeys.com/category/build-guides/) diff --git a/keyboards/basekeys/trifecta/rules.mk b/keyboards/basekeys/trifecta/rules.mk new file mode 100644 index 000000000000..975fe8462070 --- /dev/null +++ b/keyboards/basekeys/trifecta/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output + +ENCODER_ENABLE = yes diff --git a/keyboards/basekeys/trifecta/trifecta.c b/keyboards/basekeys/trifecta/trifecta.c new file mode 100644 index 000000000000..e7aca201ce42 --- /dev/null +++ b/keyboards/basekeys/trifecta/trifecta.c @@ -0,0 +1,61 @@ +/* Copyright 2020 Swiftrax and Basekeys.com + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "trifecta.h" + +#ifdef RGB_MATRIX_ENABLE + +led_config_t g_led_config = { { + { NO_LED, 70, 61, 52, 43, 34, 24, 14 }, + { 79, 69, 60, 51, 42, 33, 23, NO_LED }, + { NO_LED, 71, 62, 53, 44, 35, 25, 15 }, + { 78, 68, 59, 50, 41, 32, 22, NO_LED }, + { 77, 67, 58, 49, 40, 31, NO_LED, 16 }, + { NO_LED, 72, 63, 54, 45, 36, 26, NO_LED }, + { NO_LED, 73, 64, 55, 46, 37, 27, 17 }, + { 76, 66, 57, 48, 39, 30, 21, NO_LED }, + { NO_LED, 74, 56, NO_LED, NO_LED, 38, 28, 18 }, + { 75, 65, NO_LED, NO_LED, 47, 29, 20, 19 } +}, { + // Underglow + { 218, 7 }, { 214, 45 }, { 180, 47 }, { 147, 50 }, { 94, 62 }, { 37, 51 }, { 4, 8 }, { 36, 15 }, + { 62, 18 }, { 78, 5 }, { 119, 7 }, { 145, 16 }, { 166, 3 }, { 200, 16 }, + + //Per Key + { 185, 11 }, { 191, 22 }, { 188, 33 }, { 200, 46 }, { 200, 57 }, { 212, 57 }, { 188, 57 }, { 181, 44 }, + { 176, 22 }, { 168, 11 }, { 155, 11 }, { 164, 22 }, { 169, 32 }, { 165, 44 }, { 172, 55 }, { 157, 54 }, + { 153, 44 }, { 156, 33 }, { 153, 22 }, { 142, 12 }, { 130, 13 }, { 138, 23 }, { 143, 33 }, { 140, 45 }, + { 137, 56 }, { 128, 47 }, { 132, 35 }, { 127, 25 }, { 119, 16 }, { 107, 17 }, { 115, 27 }, { 120, 37 }, + { 116, 48 }, { 117, 59 }, { 104, 51 }, { 109, 39 }, { 104, 29 }, { 86, 19 }, { 74, 16 }, { 78, 28 }, + { 79, 39 }, { 82, 50 }, { 73, 60 }, { 71, 48 }, { 67, 37 }, { 66, 26 }, { 63, 15 }, { 50, 12 }, + { 55, 24 }, { 55, 35 }, { 59, 47 }, { 50, 56 }, { 47, 45 }, { 43, 33 }, { 43, 22 }, { 39, 10 }, + { 25, 11 }, { 29, 22 }, { 30, 33 }, { 34, 44 }, { 24, 54 }, { 9, 55 }, { 15, 44 }, { 14, 33 }, + { 14, 22 }, { 14, 11 } +}, { + 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, + + 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4 +} }; +#endif \ No newline at end of file diff --git a/keyboards/basekeys/trifecta/trifecta.h b/keyboards/basekeys/trifecta/trifecta.h new file mode 100644 index 000000000000..ed337813c657 --- /dev/null +++ b/keyboards/basekeys/trifecta/trifecta.h @@ -0,0 +1,48 @@ +/* Copyright 2020 Swiftrax and Basekeys.com + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +#define XXX KC_NO//readabilty + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + k10, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k16, k07, k17, k37, \ + k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k36, k27, k57, \ + k40, k51, k41, k52, k42, k53, k43, k54, k44, k55, k45, k56, k47, k77, \ + k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k76, k67, \ + k90, k81, k91, k82, k94, k85, k95, k86, k96, k87, k97 \ +) \ +{ \ + { XXX, k01, k02, k03, k04, k05, k06, k07}, \ + { k10, k11, k12, k13, k14, k15, k16, k17}, \ + { XXX, k21, k22, k23, k24, k25, k26, k27}, \ + { k30, k31, k32, k33, k34, k35, k36, k37}, \ + { k40, k41, k42, k43, k44, k45, XXX, k47}, \ + { XXX, k51, k52, k53, k54, k55, k56, k57}, \ + { XXX, k61, k62, k63, k64, k65, k66, k67}, \ + { k70, k71, k72, k73, k74, k75, k76, k77}, \ + { XXX, k81, k82, XXX, XXX, k85, k86, k87}, \ + { k90, k91, XXX, XXX, k94, k95, k96, k97} \ +} diff --git a/keyboards/bear_65/bear_65.c b/keyboards/bear_65/bear_65.c new file mode 100644 index 000000000000..a2ae572b82da --- /dev/null +++ b/keyboards/bear_65/bear_65.c @@ -0,0 +1,17 @@ +/* Copyright 2020 MudkipMao + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "bear_65.h" diff --git a/keyboards/bear_65/bear_65.h b/keyboards/bear_65/bear_65.h new file mode 100644 index 000000000000..94ec89c889db --- /dev/null +++ b/keyboards/bear_65/bear_65.h @@ -0,0 +1,46 @@ +/* Copyright 2020 MudkipMao + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +#define LAYOUT_all( \ + K31, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K4E, \ + K1E, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K2E, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K43, K45, K46, K48, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, KC_NO, KC_NO, K43, KC_NO, K45, K46, KC_NO, K48, KC_NO, K4A, K4B, K4C, K4D, K4E }, \ +} + +#define LAYOUT_full_bs( \ + K31, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K4E, \ + K1E, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K2E, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K43, K45, K46, K48, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, KC_NO, KC_NO, K43, KC_NO, K45, K46, KC_NO, K48, KC_NO, K4A, K4B, K4C, K4D, K4E }, \ +} diff --git a/keyboards/bear_65/config.h b/keyboards/bear_65/config.h new file mode 100644 index 000000000000..1b7524f074bb --- /dev/null +++ b/keyboards/bear_65/config.h @@ -0,0 +1,76 @@ +/* +Copyright 2020 MudkipMao + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xA13B // Jacky's vendor ID, arbitrarily selected by MudkipMao +#define PRODUCT_ID 0x000A +#define DEVICE_VER 0x0001 +#define MANUFACTURER Jacky +#define PRODUCT Jacky Bear 65 Ergo + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7 } +#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, F7, F6, F5, F4, F1, F0 } + +/* Setting the matrix value of top left key for bootmagic lite */ +#define BOOTMAGIC_LITE_ROW 3 +#define BOOTMAGIC_LITE_COLUMN 1 + +#define DIODE_DIRECTION ROW2COL + +#define BACKLIGHT_PIN B6 +#define BACKLIGHT_BREATHING +#define BACKLIGHT_LEVELS 4 + +#define RGB_DI_PIN E2 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 15 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 139 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ + #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +#endif diff --git a/keyboards/bear_65/info.json b/keyboards/bear_65/info.json new file mode 100644 index 000000000000..67fc090af832 --- /dev/null +++ b/keyboards/bear_65/info.json @@ -0,0 +1,15 @@ +{ + "keyboard_name": "Bear 65", + "url": "https://qmk.fm/keyboards", + "maintainer": "qmk", + "width": 20.75, + "height": 5, + "layouts": { + "LAYOUT_all": { + "layout": [{"label":"Esc", "x":0.5, "y":0}, {"label":"~", "x":1.75, "y":0}, {"label":"!", "x":2.75, "y":0}, {"label":"@", "x":3.75, "y":0}, {"label":"#", "x":4.75, "y":0}, {"label":"$", "x":5.75, "y":0}, {"label":"%", "x":6.75, "y":0}, {"label":"^", "x":7.75, "y":0}, {"label":"&", "x":11.25, "y":0}, {"label":"*", "x":12.25, "y":0}, {"label":"(", "x":13.25, "y":0}, {"label":")", "x":14.25, "y":0}, {"label":"_", "x":15.25, "y":0}, {"label":"+", "x":16.25, "y":0}, {"label":"|", "x":17.25, "y":0}, {"label":"~", "x":18.25, "y":0}, {"label":"Del", "x":19.75, "y":0}, {"label":"PgUp", "x":0.25, "y":1}, {"label":"Tab", "x":1.75, "y":1, "w":1.5}, {"label":"Q", "x":3.25, "y":1}, {"label":"W", "x":4.25, "y":1}, {"label":"E", "x":5.25, "y":1}, {"label":"R", "x":6.25, "y":1}, {"label":"T", "x":7.25, "y":1}, {"label":"Y", "x":10.75, "y":1}, {"label":"U", "x":11.75, "y":1}, {"label":"I", "x":12.75, "y":1}, {"label":"O", "x":13.75, "y":1}, {"label":"P", "x":14.75, "y":1}, {"label":"{", "x":15.75, "y":1}, {"label":"}", "x":16.75, "y":1}, {"label":"Backspace", "x":17.75, "y":1, "w":1.5}, {"label":"PgDn", "x":0, "y":2}, {"label":"Caps Lock", "x":1.75, "y":2, "w":1.75}, {"label":"A", "x":3.5, "y":2}, {"label":"S", "x":4.5, "y":2}, {"label":"D", "x":5.5, "y":2}, {"label":"F", "x":6.5, "y":2}, {"label":"G", "x":7.5, "y":2}, {"label":"H", "x":11, "y":2}, {"label":"J", "x":12, "y":2}, {"label":"K", "x":13, "y":2}, {"label":"L", "x":14, "y":2}, {"label":":", "x":15, "y":2}, {"label":"\"", "x":16, "y":2}, {"label":"Enter", "x":17, "y":2, "w":2.25}, {"label":"Shift", "x":1.75, "y":3, "w":2.25}, {"label":"Z", "x":4, "y":3}, {"label":"X", "x":5, "y":3}, {"label":"C", "x":6, "y":3}, {"label":"V", "x":7, "y":3}, {"label":"B", "x":8, "y":3}, {"label":"B", "x":10.5, "y":3}, {"label":"N", "x":11.5, "y":3}, {"label":"M", "x":12.5, "y":3}, {"label":"<", "x":13.5, "y":3}, {"label":">", "x":14.5, "y":3}, {"label":"?", "x":15.5, "y":3}, {"label":"Shift", "x":16.5, "y":3, "w":1.75}, {"label":"Up", "x":18.25, "y":3}, {"label":"Ctrl", "x":1.75, "y":4, "w":1.5}, {"label":"Alt", "x":4.75, "y":4, "w":1.25}, {"x":6, "y":4, "w":2.25}, {"label":"Win", "x":8.25, "y":4}, {"x":10.5, "y":4, "w":2.75}, {"label":"Alt", "x":13.25, "y":4, "w":1.5}, {"label":"Left", "x":17.25, "y":4}, {"label":"Down", "x":18.25, "y":4}, {"label":"Right", "x":19.25, "y":4}] + }, + "LAYOUT_full_bs": { + "layout": [{"label":"Esc", "x":0.5, "y":0}, {"label":"~", "x":1.75, "y":0}, {"label":"!", "x":2.75, "y":0}, {"label":"@", "x":3.75, "y":0}, {"label":"#", "x":4.75, "y":0}, {"label":"$", "x":5.75, "y":0}, {"label":"%", "x":6.75, "y":0}, {"label":"^", "x":7.75, "y":0}, {"label":"&", "x":11.25, "y":0}, {"label":"*", "x":12.25, "y":0}, {"label":"(", "x":13.25, "y":0}, {"label":")", "x":14.25, "y":0}, {"label":"_", "x":15.25, "y":0}, {"label":"+", "x":16.25, "y":0}, {"label":"Backspace", "x":17.25, "y":0, "w":2}, {"label":"Del", "x":19.75, "y":0}, {"label":"PgUp", "x":0.25, "y":1}, {"label":"Tab", "x":1.75, "y":1, "w":1.5}, {"label":"Q", "x":3.25, "y":1}, {"label":"W", "x":4.25, "y":1}, {"label":"E", "x":5.25, "y":1}, {"label":"R", "x":6.25, "y":1}, {"label":"T", "x":7.25, "y":1}, {"label":"Y", "x":10.75, "y":1}, {"label":"U", "x":11.75, "y":1}, {"label":"I", "x":12.75, "y":1}, {"label":"O", "x":13.75, "y":1}, {"label":"P", "x":14.75, "y":1}, {"label":"{", "x":15.75, "y":1}, {"label":"}", "x":16.75, "y":1}, {"label":"|", "x":17.75, "y":1, "w":1.5}, {"label":"PgDn", "x":0, "y":2}, {"label":"Caps Lock", "x":1.75, "y":2, "w":1.75}, {"label":"A", "x":3.5, "y":2}, {"label":"S", "x":4.5, "y":2}, {"label":"D", "x":5.5, "y":2}, {"label":"F", "x":6.5, "y":2}, {"label":"G", "x":7.5, "y":2}, {"label":"H", "x":11, "y":2}, {"label":"J", "x":12, "y":2}, {"label":"K", "x":13, "y":2}, {"label":"L", "x":14, "y":2}, {"label":":", "x":15, "y":2}, {"label":"\"", "x":16, "y":2}, {"label":"Enter", "x":17, "y":2, "w":2.25}, {"label":"Shift", "x":1.75, "y":3, "w":2.25}, {"label":"Z", "x":4, "y":3}, {"label":"X", "x":5, "y":3}, {"label":"C", "x":6, "y":3}, {"label":"V", "x":7, "y":3}, {"label":"B", "x":8, "y":3}, {"label":"B", "x":10.5, "y":3}, {"label":"N", "x":11.5, "y":3}, {"label":"M", "x":12.5, "y":3}, {"label":"<", "x":13.5, "y":3}, {"label":">", "x":14.5, "y":3}, {"label":"?", "x":15.5, "y":3}, {"label":"Shift", "x":16.5, "y":3, "w":1.75}, {"label":"Up", "x":18.25, "y":3}, {"label":"Ctrl", "x":1.75, "y":4, "w":1.5}, {"label":"Alt", "x":4.75, "y":4, "w":1.25}, {"x":6, "y":4, "w":2.25}, {"label":"Win", "x":8.25, "y":4}, {"x":10.5, "y":4, "w":2.75}, {"label":"Alt", "x":13.25, "y":4, "w":1.5}, {"label":"Left", "x":17.25, "y":4}, {"label":"Down", "x":18.25, "y":4}, {"label":"Right", "x":19.25, "y":4}] + } + } +} diff --git a/keyboards/bear_65/keymaps/default/keymap.c b/keyboards/bear_65/keymaps/default/keymap.c new file mode 100644 index 000000000000..b7d5cdf61cc9 --- /dev/null +++ b/keyboards/bear_65/keymaps/default/keymap.c @@ -0,0 +1,39 @@ +/* Copyright 2020 MudkipMao + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_all( + KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_DEL, + KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_PGDN, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LALT, KC_SPC, KC_LGUI, KC_SPC, MO(_FN), KC_LEFT, KC_DOWN, KC_RGHT + ), + [_FN] = LAYOUT_all( + RESET, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, + RGB_MOD, _______, KC_BRID, KC_BRIU, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAD, RGB_VAI, _______, + RGB_TOG, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______,_______ + ) +}; diff --git a/keyboards/bear_65/keymaps/default/readme.md b/keyboards/bear_65/keymaps/default/readme.md new file mode 100644 index 000000000000..d51734855773 --- /dev/null +++ b/keyboards/bear_65/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for bear_65 diff --git a/keyboards/bear_65/keymaps/via/keymap.c b/keyboards/bear_65/keymaps/via/keymap.c new file mode 100644 index 000000000000..2ddc5b43d8b7 --- /dev/null +++ b/keyboards/bear_65/keymaps/via/keymap.c @@ -0,0 +1,47 @@ +/* Copyright 2020 MudkipMao + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_full_bs( + KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_PGDN, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LALT, KC_SPC, KC_LGUI, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_full_bs( + RESET, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + RGB_MOD, _______, KC_BRID, KC_BRIU, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAD, RGB_VAI, _______, + RGB_TOG, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______,_______ + ), + [2] = LAYOUT_full_bs( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______,_______ + ), + [3] = LAYOUT_full_bs( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______,_______ + ) +}; diff --git a/keyboards/bear_65/keymaps/via/readme.md b/keyboards/bear_65/keymaps/via/readme.md new file mode 100644 index 000000000000..5cb67ab25f39 --- /dev/null +++ b/keyboards/bear_65/keymaps/via/readme.md @@ -0,0 +1 @@ +# The via keymap for bear_65 diff --git a/keyboards/bear_65/keymaps/via/rules.mk b/keyboards/bear_65/keymaps/via/rules.mk new file mode 100644 index 000000000000..1e5b99807cb7 --- /dev/null +++ b/keyboards/bear_65/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/bear_65/readme.md b/keyboards/bear_65/readme.md new file mode 100644 index 000000000000..44a5e95537e1 --- /dev/null +++ b/keyboards/bear_65/readme.md @@ -0,0 +1,19 @@ +# Bear 65 + +![Bear 65](https://i.imgur.com/W1sVP1Tl.jpg) + +A gasket-mounted 65% keyboard inspired by the [TGR Alice](https://github.com/qmk/qmk_firmware/tree/master/keyboards/tgr/alice). Designed and produced by [jacky](https://geekhack.org/index.php?action=profile;u=63864) from Geekhack. + +* Keyboard Maintainer: QMK Community +* Hardware Supported: Bear 65 +* Hardware Availability: The GB happened July 15th 2020, units are still in production + +Make example for this keyboard (after setting up your build environment): + + make bear_65:default + +Flashing example for this keyboard: + + make bear_65:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/bear_65/rules.mk b/keyboards/bear_65/rules.mk new file mode 100644 index 000000000000..339c37c7ee03 --- /dev/null +++ b/keyboards/bear_65/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output + +LTO_ENABLE = yes # Use LTO flags to reduce firmware size diff --git a/keyboards/bm60rgb_iso/bm60rgb_iso.c b/keyboards/bm60rgb_iso/bm60rgb_iso.c index 3fa1bc89825b..4e292bc54966 100644 --- a/keyboards/bm60rgb_iso/bm60rgb_iso.c +++ b/keyboards/bm60rgb_iso/bm60rgb_iso.c @@ -32,7 +32,9 @@ led_config_t g_led_config = { { // LShift, <, Z, X, C, V, B, N, M, ,, ., /, Shift, Up, { 3, 48 }, { 22, 48 }, { 33, 48 }, { 48, 48 }, { 63, 48 }, { 78, 48 }, { 93, 48 }, { 108, 48 }, { 123, 48 }, { 138, 48 }, { 153, 48 }, { 168, 48 }, { 194, 48 }, { 213, 48 }, // Ctrl, GUI, Alt, Space, RAlt, FN, Left, Down, Right - { 3, 64 }, { 22, 64 }, { 33, 64 }, { 101, 64 }, { 135, 64 }, { 153, 64 }, { 195, 64 }, { 210, 64 }, { 225, 64 } + { 3, 64 }, { 22, 64 }, { 33, 64 }, { 101, 64 }, { 135, 64 }, { 153, 64 }, { 195, 64 }, { 210, 64 }, { 225, 64 }, + // UNDERGLOW + { 216, 32 }, { 180, 32 }, { 144, 32 }, { 108, 32 }, { 72, 32 }, { 36, 32 } }, { // Esc, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, -, =, Backspace 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, @@ -43,6 +45,8 @@ led_config_t g_led_config = { { // LShift,<, Z, X, C, V, B, N, M, ,, ., Shift, Up, / 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 4, // Ctrl, GUI, Alt, Space, RAlt, FN, Left, Down, Right - 1, 1, 1, 4, 1, 1, 1, 1, 1 + 1, 1, 1, 4, 1, 1, 1, 1, 1, + // UNDERGLOW + 2, 2, 2, 2, 2, 2 } }; #endif diff --git a/keyboards/boardsource/4x12/config.h b/keyboards/boardsource/4x12/config.h index e8f858586cc6..b1314ca7f249 100644 --- a/keyboards/boardsource/4x12/config.h +++ b/keyboards/boardsource/4x12/config.h @@ -3,7 +3,7 @@ #include "config_common.h" /* USB Device descriptor parameter */ -#define VENDOR_ID 0xF7E0 +#define VENDOR_ID 0x4273 // "Bs" - Boardsource #define PRODUCT_ID 0x0412 #define DEVICE_VER 0x0000 #define MANUFACTURER Boardsource diff --git a/keyboards/boardsource/5x12/config.h b/keyboards/boardsource/5x12/config.h index 1cd7101589aa..05a8ce2b0612 100644 --- a/keyboards/boardsource/5x12/config.h +++ b/keyboards/boardsource/5x12/config.h @@ -3,8 +3,8 @@ #include "config_common.h" /* USB Device descriptor parameter */ -#define VENDOR_ID 0xF7E0 -#define PRODUCT_ID 0x0412 +#define VENDOR_ID 0x4273 // "Bs" - Boardsource +#define PRODUCT_ID 0x0512 #define DEVICE_VER 0x0000 #define MANUFACTURER Boardsource #define PRODUCT 5x12 diff --git a/keyboards/boardsource/5x12/keymaps/via/keymap.c b/keyboards/boardsource/5x12/keymaps/via/keymap.c new file mode 100644 index 000000000000..5b97e9951da4 --- /dev/null +++ b/keyboards/boardsource/5x12/keymaps/via/keymap.c @@ -0,0 +1,46 @@ +#include QMK_KEYBOARD_H + +enum layers { + _MAIN, + _RAISE, + _LOWER, +}; + +// Readability keycodes +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_MAIN] = LAYOUT_ortho_5x12( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, + KC_PIPE, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT + ), + + [_RAISE] = LAYOUT_ortho_5x12( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, + _______, KC_4, KC_5, KC_6, KC_PLUS, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______, + KC_ENT, KC_7, KC_8, KC_9, KC_MINS, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_MUTE, _______, KC_BSLS, + RESET, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY + ), + + [_LOWER] = LAYOUT_ortho_5x12( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, + KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + RESET, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY + ), + [3] = LAYOUT_ortho_5x12( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + ) + +}; diff --git a/keyboards/boardsource/5x12/keymaps/via/readme.md b/keyboards/boardsource/5x12/keymaps/via/readme.md new file mode 100644 index 000000000000..d088e0a64cf1 --- /dev/null +++ b/keyboards/boardsource/5x12/keymaps/via/readme.md @@ -0,0 +1,5 @@ +# The via keymap for boardsource 5x12 ortholinear keyboard + +This folder contains the [VIA](https://caniusevia.com/) configuration for the boardsource 5x12 ortholinear keyboard + +Maintained by: [gwillad](https://github.com/gwillad) diff --git a/keyboards/boardsource/5x12/keymaps/via/rules.mk b/keyboards/boardsource/5x12/keymaps/via/rules.mk new file mode 100644 index 000000000000..036bd6d1c3ec --- /dev/null +++ b/keyboards/boardsource/5x12/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes \ No newline at end of file diff --git a/keyboards/claw44/ssd1306.c b/keyboards/claw44/ssd1306.c index e04a431357c3..7dea1cc176f0 100644 --- a/keyboards/claw44/ssd1306.c +++ b/keyboards/claw44/ssd1306.c @@ -10,6 +10,8 @@ #include "sendchar.h" #include "timer.h" +struct CharacterMatrix display; + extern const unsigned char font[] PROGMEM; // Set this to 1 to help diagnose early startup problems diff --git a/keyboards/claw44/ssd1306.h b/keyboards/claw44/ssd1306.h index 0ca093093a17..11a3cc67f449 100644 --- a/keyboards/claw44/ssd1306.h +++ b/keyboards/claw44/ssd1306.h @@ -65,7 +65,7 @@ struct CharacterMatrix { bool dirty; }; -struct CharacterMatrix display; +extern struct CharacterMatrix display; bool iota_gfx_init(bool rotate); void iota_gfx_task(void); diff --git a/keyboards/clueboard/66/keymaps/badger/keymap.c b/keyboards/clueboard/66/keymaps/badger/keymap.c new file mode 100644 index 000000000000..74fec0b58e67 --- /dev/null +++ b/keyboards/clueboard/66/keymaps/badger/keymap.c @@ -0,0 +1,53 @@ +/* +Copyright 2020 Dan White + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "badger.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY_LINUX] = LAYOUT_66_ansi(\ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, \ + MOVE, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, ADJUST, KC_RGUI, KC_LALT, KC_LEFT, KC_DOWN, KC_RGHT), + + [_MOVE_LINUX] = LAYOUT_66_ansi(\ + KC_ESC, VD_1, VD_2, VD_3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, IJ_UP, IJ_DOWN, KC_DEL, KC_PGUP, \ + _______, IJ_STEP, IJ_INTO, IJ_OUT, IJ_RUN, IJ_STOP, IJ_OUT, KC_PGUP, KC_HOME, KC_END, KC_PGDN, IJ_BACK, IJ_FWD, KC_INS, KC_PGDN, \ + _______, WM_LH, WM_UH, WM_RH, WD_FRWD, MAC_POP, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, CS_RIGHT, CS_DOWN, _______, \ + _______, MM_UH, MM_BH, MAC_CPY, MAC_PST, WD_BACK, KC_MNXT, IJ_REN, IJ_IMPL, IJ_DECL, IJ_USAG, _______, KC_BRIU, \ + _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_BRID, KC_END), + + [_QWERTY_MAC] = LAYOUT_66_ansi(\ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, \ + MOVE_MAC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, ADJUST, KC_RGUI, KC_LALT, KC_LEFT, KC_DOWN, KC_RGHT), + + [_MOVE_MAC] = LAYOUT_66_ansi(\ + KC_ESC, M_VD1, M_VD2, M_VD3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, IJ_UP, IJ_DOWN, KC_DEL, KC_PGUP, \ + _______, IJ_STEP, IJ_INTO, IJ_OUT, IJ_RUN, IJ_STOP, IJ_OUT, KC_PGUP, KC_HOME, KC_END, KC_PGDN, IJ_BACK, IJ_FWD, KC_INS, KC_PGDN, \ + _______, MM_LH, MM_MAX, MM_RH, WD_FRWD, MAC_POP, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, CM_RIGHT, CM_DOWN, _______, \ + _______, MM_UH, MM_BH, MAC_CPY, MAC_PST, WD_BACK, KC_MNXT, IJ_REN, IJ_IMPL, IJ_DECL, IJ_USAG, _______, KC_BRIU, \ + _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_BRID, KC_END), + + [_ADJUST] = LAYOUT_66_ansi(\ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_VOLU, \ + _______, NK_ON, NK_OFF, EEP_RST, RESET, KC_MSTP, KC_MPLY, KC_PGUP, KC_HOME, KC_END, KC_PGDN, AG_SWAP, AG_NORM, KC_INS, KC_VOLD, \ + _______, GE_SWAP, GE_NORM, DEBUG, AG_SWAP, AG_NORM, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, _______, \ + _______, DF_1, DF_2, KC_CAPS, _______, KC_MPRV, KC_MNXT, KC_MUTE, KC_WBAK, KC_WFWD, _______, _______, KC_BRIU, \ + _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_BRID, KC_END) +}; + diff --git a/keyboards/comet46/ssd1306.c b/keyboards/comet46/ssd1306.c index abbed4a49fb9..4bd2d80bc4d4 100644 --- a/keyboards/comet46/ssd1306.c +++ b/keyboards/comet46/ssd1306.c @@ -10,6 +10,8 @@ #include "sendchar.h" #include "timer.h" +struct CharacterMatrix display; + extern const unsigned char font[] PROGMEM; // Set this to 1 to help diagnose early startup problems diff --git a/keyboards/comet46/ssd1306.h b/keyboards/comet46/ssd1306.h index 0ca093093a17..11a3cc67f449 100644 --- a/keyboards/comet46/ssd1306.h +++ b/keyboards/comet46/ssd1306.h @@ -65,7 +65,7 @@ struct CharacterMatrix { bool dirty; }; -struct CharacterMatrix display; +extern struct CharacterMatrix display; bool iota_gfx_init(bool rotate); void iota_gfx_task(void); diff --git a/keyboards/coseyfannitutti/discipad/keymaps/via/rules.mk b/keyboards/coseyfannitutti/discipad/keymaps/via/rules.mk index 00c11acccda3..fcb7b9eab6a7 100644 --- a/keyboards/coseyfannitutti/discipad/keymaps/via/rules.mk +++ b/keyboards/coseyfannitutti/discipad/keymaps/via/rules.mk @@ -1,4 +1,3 @@ VIA_ENABLE = yes LTO_ENABLE = yes -EXTRAKEY_ENABLE = no MOUSEKEY_ENABLE = no diff --git a/keyboards/coseyfannitutti/discipline/keymaps/via/rules.mk b/keyboards/coseyfannitutti/discipline/keymaps/via/rules.mk index d0e4977b849b..fcb7b9eab6a7 100644 --- a/keyboards/coseyfannitutti/discipline/keymaps/via/rules.mk +++ b/keyboards/coseyfannitutti/discipline/keymaps/via/rules.mk @@ -1,4 +1,3 @@ VIA_ENABLE = yes LTO_ENABLE = yes -EXTRAKEY_ENABLE = no -MOUSEKEY_ENABLE = no \ No newline at end of file +MOUSEKEY_ENABLE = no diff --git a/keyboards/coseyfannitutti/mysterium/info.json b/keyboards/coseyfannitutti/mysterium/info.json index 1b993a2edc66..4c180b7d5f35 100644 --- a/keyboards/coseyfannitutti/mysterium/info.json +++ b/keyboards/coseyfannitutti/mysterium/info.json @@ -8,8 +8,14 @@ "LAYOUT_tkl_ansi": { "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Backspace", "x":13, "y":1.25, "w":2}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"PgUp", "x":17.25, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"PgDn", "x":17.25, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"Shift", "x":0, "y":4.25, "w":2.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.25}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.25}, {"label":"Menu", "x":11.25, "y":5.25, "w":1.25}, {"label":"Fn", "x":12.5, "y":5.25, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.25}, {"label":"\u2193", "x":16.25, "y":5.25}, {"label":"\u2192", "x":17.25, "y":5.25}] }, - "LAYOUT_tkl_ansi_tsangan": { + "LAYOUT_tkl_ansi_7u": { "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Backspace", "x":13, "y":1.25, "w":2}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"PgUp", "x":17.25, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"PgDn", "x":17.25, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"Shift", "x":0, "y":4.25, "w":2.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.25}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.5}, {"label":"Win", "x":1.5, "y":5.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.5}, {"x":4, "y":5.25, "w":7}, {"label":"Alt", "x":11, "y":5.25, "w":1.5}, {"label":"Fn", "x":12.5, "y":5.25}, {"label":"Ctrl", "x":13.5, "y":5.25, "w":1.5}, {"label":"\u2190", "x":15.25, "y":5.25}, {"label":"\u2193", "x":16.25, "y":5.25}, {"label":"\u2192", "x":17.25, "y":5.25}] + }, + "LAYOUT_tkl_iso": { + "layout": [{"x":0, "y":0.25}, {"x":2, "y":0.25}, {"x":3, "y":0.25}, {"x":4, "y":0.25}, {"x":5, "y":0.25}, {"x":6.5, "y":0.25}, {"x":7.5, "y":0.25}, {"x":8.5, "y":0.25}, {"x":9.5, "y":0.25}, {"x":11, "y":0.25}, {"x":12, "y":0.25}, {"x":13, "y":0.25}, {"x":14, "y":0.25}, {"x":15.25, "y":0.25}, {"x":16.25, "y":0.25}, {"x":17.25, "y":0.25}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5, "w":2}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.75, "y":2.5, "w":1.25, "h":2}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5}, {"x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5, "w":2.75}, {"x":16.25, "y":4.5}, {"x":0, "y":5.5, "w":1.25}, {"x":1.25, "y":5.5, "w":1.25}, {"x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"x":10, "y":5.5, "w":1.25}, {"x":11.25, "y":5.5, "w":1.25}, {"x":12.5, "y":5.5, "w":1.25}, {"x":13.75, "y":5.5, "w":1.25}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}] + }, + "LAYOUT_tkl_iso_7u": { + "layout": [{"x":0, "y":0.25}, {"x":2, "y":0.25}, {"x":3, "y":0.25}, {"x":4, "y":0.25}, {"x":5, "y":0.25}, {"x":6.5, "y":0.25}, {"x":7.5, "y":0.25}, {"x":8.5, "y":0.25}, {"x":9.5, "y":0.25}, {"x":11, "y":0.25}, {"x":12, "y":0.25}, {"x":13, "y":0.25}, {"x":14, "y":0.25}, {"x":15.25, "y":0.25}, {"x":16.25, "y":0.25}, {"x":17.25, "y":0.25}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5, "w":2}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.75, "y":2.5, "w":1.25, "h":2}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5}, {"x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5, "w":2.75}, {"x":16.25, "y":4.5}, {"x":0, "y":5.5, "w":1.5}, {"x":1.5, "y":5.5}, {"x":2.5, "y":5.5, "w":1.5}, {"x":4, "y":5.5, "w":7}, {"x":11, "y":5.5, "w":1.5}, {"x":12.5, "y":5.5}, {"x":13.5, "y":5.5, "w":1.5}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}] } } } \ No newline at end of file diff --git a/keyboards/coseyfannitutti/mysterium/keymaps/tsangan/keymap.c b/keyboards/coseyfannitutti/mysterium/keymaps/ansi_7u/keymap.c similarity index 97% rename from keyboards/coseyfannitutti/mysterium/keymaps/tsangan/keymap.c rename to keyboards/coseyfannitutti/mysterium/keymaps/ansi_7u/keymap.c index 883de97ffb1b..35487eee551c 100644 --- a/keyboards/coseyfannitutti/mysterium/keymaps/tsangan/keymap.c +++ b/keyboards/coseyfannitutti/mysterium/keymaps/ansi_7u/keymap.c @@ -16,7 +16,7 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_tkl_ansi_tsangan( + [0] = LAYOUT_tkl_ansi_7u( KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, @@ -24,7 +24,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT), - [1] = LAYOUT_tkl_ansi_tsangan( + [1] = LAYOUT_tkl_ansi_7u( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, diff --git a/keyboards/coseyfannitutti/mysterium/keymaps/iso/keymap.c b/keyboards/coseyfannitutti/mysterium/keymaps/iso/keymap.c new file mode 100644 index 000000000000..bad4dc2f42e6 --- /dev/null +++ b/keyboards/coseyfannitutti/mysterium/keymaps/iso/keymap.c @@ -0,0 +1,34 @@ +/* Copyright 2019 COSEYFANNITUTTI + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_tkl_iso( + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT), + + [1] = LAYOUT_tkl_iso( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_TRNS) +}; diff --git a/keyboards/coseyfannitutti/mysterium/keymaps/via/keymap.c b/keyboards/coseyfannitutti/mysterium/keymaps/via/keymap.c index bd8de69a04a8..f7baaea8fc26 100644 --- a/keyboards/coseyfannitutti/mysterium/keymaps/via/keymap.c +++ b/keyboards/coseyfannitutti/mysterium/keymaps/via/keymap.c @@ -16,35 +16,35 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_tkl_ansi( + [0] = LAYOUT_tkl_iso( KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT), + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_BSLS, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT), - [1] = LAYOUT_tkl_ansi( + [1] = LAYOUT_tkl_iso( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_TRNS), - [2] = LAYOUT_tkl_ansi( + [2] = LAYOUT_tkl_iso( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - [3] = LAYOUT_tkl_ansi( + [3] = LAYOUT_tkl_iso( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) }; diff --git a/keyboards/coseyfannitutti/mysterium/keymaps/via/rules.mk b/keyboards/coseyfannitutti/mysterium/keymaps/via/rules.mk index d0e4977b849b..36b7ba9cbc98 100644 --- a/keyboards/coseyfannitutti/mysterium/keymaps/via/rules.mk +++ b/keyboards/coseyfannitutti/mysterium/keymaps/via/rules.mk @@ -1,4 +1,2 @@ VIA_ENABLE = yes LTO_ENABLE = yes -EXTRAKEY_ENABLE = no -MOUSEKEY_ENABLE = no \ No newline at end of file diff --git a/keyboards/coseyfannitutti/mysterium/mysterium.h b/keyboards/coseyfannitutti/mysterium/mysterium.h index c5deacd833c3..b705f04c0d4c 100644 --- a/keyboards/coseyfannitutti/mysterium/mysterium.h +++ b/keyboards/coseyfannitutti/mysterium/mysterium.h @@ -37,7 +37,7 @@ { K50, K51, K52, _x_, _x_, _x_, K56, _x_, _x_, K59, K5A, _x_, K5C, _x_, K5E, K5F, K5G, K5H } \ } -#define LAYOUT_tkl_ansi_tsangan( \ +#define LAYOUT_tkl_ansi_7u( \ K00, K02, K03, K04, K05, K06, K07, K08, K09, K0B, K0C, K0D, K0E, K0F, K0G, K0H, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1F, K1G, K1H, \ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2F, K2G, K2H, \ @@ -53,3 +53,37 @@ { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, _x_, _x_, K4D, _x_, _x_, K4G, _x_ }, \ { K50, K51, K52, _x_, _x_, _x_, K56, _x_, _x_, _x_, K5A, _x_, K5C, _x_, K5E, K5F, K5G, K5H } \ } + +#define LAYOUT_tkl_iso( \ + K00, K02, K03, K04, K05, K06, K07, K08, K09, K0B, K0C, K0D, K0E, K0F, K0G, K0H, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1F, K1G, K1H, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2F, K2G, K2H, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K2D, \ + K40, K01, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4D, K4G, \ + K50, K51, K52, K56, K59, K5A, K5C, K5E, K5F, K5G, K5H \ +) \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, _x_, K0B, K0C, K0D, K0E, K0F, K0G, K0H }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, _x_, K1F, K1G, K1H }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, _x_, K2F, K2G, K2H }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, _x_, K3D, _x_, _x_, _x_, _x_ }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, _x_, _x_, K4D, _x_, _x_, K4G, _x_ }, \ + { K50, K51, K52, _x_, _x_, _x_, K56, _x_, _x_, K59, K5A, _x_, K5C, _x_, K5E, K5F, K5G, K5H } \ +} + +#define LAYOUT_tkl_iso_7u( \ + K00, K02, K03, K04, K05, K06, K07, K08, K09, K0B, K0C, K0D, K0E, K0F, K0G, K0H, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1F, K1G, K1H, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2F, K2G, K2H, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K2D, \ + K40, K01, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4D, K4G, \ + K50, K51, K52, K56, K5A, K5C, K5E, K5F, K5G, K5H \ +) \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, _x_, K0B, K0C, K0D, K0E, K0F, K0G, K0H }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, _x_, K1F, K1G, K1H }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, _x_, K2F, K2G, K2H }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, _x_, K3D, _x_, _x_, _x_, _x_ }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, _x_, _x_, K4D, _x_, _x_, K4G, _x_ }, \ + { K50, K51, K52, _x_, _x_, _x_, K56, _x_, _x_, _x_, K5A, _x_, K5C, _x_, K5E, K5F, K5G, K5H } \ +} diff --git a/keyboards/coseyfannitutti/romeo/keymaps/via/rules.mk b/keyboards/coseyfannitutti/romeo/keymaps/via/rules.mk index d0e4977b849b..fcb7b9eab6a7 100644 --- a/keyboards/coseyfannitutti/romeo/keymaps/via/rules.mk +++ b/keyboards/coseyfannitutti/romeo/keymaps/via/rules.mk @@ -1,4 +1,3 @@ VIA_ENABLE = yes LTO_ENABLE = yes -EXTRAKEY_ENABLE = no -MOUSEKEY_ENABLE = no \ No newline at end of file +MOUSEKEY_ENABLE = no diff --git a/keyboards/crkbd/config.h b/keyboards/crkbd/config.h index fb1cdf3962a1..a2dd710714b7 100644 --- a/keyboards/crkbd/config.h +++ b/keyboards/crkbd/config.h @@ -1,6 +1,6 @@ /* -Copyright 2012 Jun Wako -Copyright 2015 Jack Humbert +Copyright 2019 @foostan +Copyright 2020 Drashna Jaelre <@drashna> This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -19,9 +19,55 @@ along with this program. If not, see . #pragma once #include "config_common.h" -#include -#define USE_I2C +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4653 +#define PRODUCT_ID 0x0001 +#define DEVICE_VER 0x0001 +#define MANUFACTURER foostan + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 8 +#define MATRIX_COLS 6 +#define MATRIX_ROW_PINS { D4, C6, D7, E6 } + +// wiring of each half +#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 } +// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +// #define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION #define USE_SERIAL #define NO_ACTION_MACRO diff --git a/keyboards/crkbd/crkbd.c b/keyboards/crkbd/crkbd.c index 7417ad604788..af0ef8a345b6 100644 --- a/keyboards/crkbd/crkbd.c +++ b/keyboards/crkbd/crkbd.c @@ -1,9 +1,19 @@ -#include "crkbd.h" +/* +Copyright 2019 @foostan +Copyright 2020 Drashna Jaelre <@drashna> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { -#ifdef SSD1306OLED - return process_record_gfx(keycode,record) && process_record_user(keycode, record); -#else - return process_record_user(keycode, record); -#endif -} +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "crkbd.h" diff --git a/keyboards/crkbd/crkbd.h b/keyboards/crkbd/crkbd.h index 73f2a3f07462..4ba9397043da 100644 --- a/keyboards/crkbd/crkbd.h +++ b/keyboards/crkbd/crkbd.h @@ -1,5 +1,24 @@ +/* +Copyright 2019 @foostan +Copyright 2020 Drashna Jaelre <@drashna> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ #pragma once #ifdef KEYBOARD_crkbd_rev1 - #include "rev1.h" +# include "rev1.h" #endif + +#include "quantum.h" diff --git a/keyboards/crkbd/keymaps/bcat/keymap.c b/keyboards/crkbd/keymaps/bcat/keymap.c index 6018835c247f..7b8329fea923 100644 --- a/keyboards/crkbd/keymaps/bcat/keymap.c +++ b/keyboards/crkbd/keymaps/bcat/keymap.c @@ -13,9 +13,9 @@ enum layer { #define LY_RSE MO(LAYER_RAISE) #define KY_CSPC LCTL(KC_SPC) -#define KY_LOCK LGUI(KC_L) -#define KY_WINL LGUI(KC_LEFT) -#define KY_WINR LGUI(KC_RGHT) +#define KY_ZMIN LCTL(KC_EQL) +#define KY_ZMOUT LCTL(KC_MINS) +#define KY_ZMRST LCTL(KC_0) const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Default layer: http://www.keyboard-layout-editor.com/#/gists/08d9827d916662a9414f48805aa895a5 */ @@ -29,7 +29,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Lower layer: http://www.keyboard-layout-editor.com/#/gists/c3fba5eaa2cd70fdfbdbc0f9e34d3bc0 */ [LAYER_LOWER] = LAYOUT( MC_ALTT, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, - KY_CSPC, KY_WINL, KY_WINR, KY_LOCK, KC_WBAK, KC_WFWD, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_TILD, + KY_CSPC, KY_ZMRST, KY_ZMOUT, KY_ZMIN, KC_WBAK, KC_WFWD, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_TILD, _______, KC_APP, KC_PSCR, KC_SLCK, KC_PAUS, KC_LGUI, KC_BSLS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_GRV, _______, _______, _______, _______, _______, _______ ), diff --git a/keyboards/crkbd/keymaps/bcat/readme.md b/keyboards/crkbd/keymaps/bcat/readme.md index 743a6572d26a..4ffb1562bfcf 100644 --- a/keyboards/crkbd/keymaps/bcat/readme.md +++ b/keyboards/crkbd/keymaps/bcat/readme.md @@ -50,7 +50,7 @@ elimination. ## Lower layer -![Lower layer layout](https://i.imgur.com/djIkwsa.png) +![Lower layer layout](https://i.imgur.com/vaIc9JY.png) ([KLE](http://www.keyboard-layout-editor.com/#/gists/c3fba5eaa2cd70fdfbdbc0f9e34d3bc0)) @@ -74,8 +74,8 @@ And yup, the shifted versions are above the unshifted versions. * Remaining keys from a TKL are placed out of the way on the bottom row of the left half. -* The home row on the left half contains handy shortcuts for window movement, -and browser navigation, and screen lock. +* The home row on the left half contains handy shortcuts for zooming and browser +navigation. * Lower+Esc is bound to Ctrl+Space because the Ctrl and Space keys are both on the left thumb, so this key combination (which I use for tmux prefix and editor @@ -109,7 +109,8 @@ keys (F1–F5) on the home row.) * Insert and Delete are on the rightmost column, because there didn't seem to be a better place to put them. -* Caps Lock is bound in the same position as on an HHKB, for lack of an obvious better location. +* Caps Lock is bound in the same position as on an HHKB, for lack of an obvious +better location. ## Adjust layer diff --git a/keyboards/crkbd/keymaps/default/keymap.c b/keyboards/crkbd/keymaps/default/keymap.c index 4dd0be899274..a3a9d9535102 100644 --- a/keyboards/crkbd/keymaps/default/keymap.c +++ b/keyboards/crkbd/keymaps/default/keymap.c @@ -1,3 +1,21 @@ +/* +Copyright 2019 @foostan +Copyright 2020 Drashna Jaelre <@drashna> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + #include QMK_KEYBOARD_H diff --git a/keyboards/crkbd/keymaps/oled_sample/config.h b/keyboards/crkbd/keymaps/oled_sample/config.h new file mode 100644 index 000000000000..41568c5916bc --- /dev/null +++ b/keyboards/crkbd/keymaps/oled_sample/config.h @@ -0,0 +1,48 @@ +/* +Copyright 2019 @foostan +Copyright 2020 Drashna Jaelre <@drashna> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + + + +#pragma once + +//#define USE_MATRIX_I2C +#ifdef KEYBOARD_crkbd_rev1_common +# undef USE_I2C +# define USE_SERIAL +#endif + +/* Select hand configuration */ + +#define MASTER_LEFT +// #define MASTER_RIGHT +// #define EE_HANDS + +#define USE_SERIAL_PD2 + +#define TAPPING_FORCE_HOLD +#define TAPPING_TERM 100 + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 27 +#define RGBLIGHT_LIMIT_VAL 120 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +#define OLED_FONT_H "keyboards/crkbd/lib/glcdfont.c" diff --git a/keyboards/crkbd/keymaps/oled_sample/keymap.c b/keyboards/crkbd/keymaps/oled_sample/keymap.c new file mode 100644 index 000000000000..f2d5770b63e7 --- /dev/null +++ b/keyboards/crkbd/keymaps/oled_sample/keymap.c @@ -0,0 +1,208 @@ +/* +Copyright 2019 @foostan +Copyright 2020 Drashna Jaelre <@drashna> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum crkbd_layers { + _QWERTY, + _LOWER, + _RAISE, + _ADJUST, +}; + + +#define RAISE MO(_RAISE) +#define LOWER MO(_LOWER) +#define CTLTB CTL_T(KC_TAB) +#define GUIEI GUI_T(KC_LANG2) +#define ALTKN ALT_T(KC_LANG1) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY] = LAYOUT( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + CTLTB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + GUIEI, LOWER, KC_SPC, KC_ENT, RAISE, ALTKN + ), + + [_LOWER] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + CTLTB, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, XXXXXXX, + KC_LSFT, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, XXXXXXX, + GUIEI, LOWER, KC_SPC, KC_ENT, RAISE, ALTKN + ), + + [_RAISE] = LAYOUT( + KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, + CTLTB, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MINS, KC_EQL, KC_LCBR, KC_RCBR, KC_PIPE, KC_GRV, + KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_UNDS, KC_PLUS, KC_LBRC, KC_RBRC, KC_BSLS, KC_TILD, + GUIEI, LOWER, KC_SPC, KC_ENT, RAISE, ALTKN + + ), + + [_ADJUST] = LAYOUT( + RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + GUIEI, LOWER, KC_SPC, KC_ENT, RAISE, ALTKN + ) +}; + +layer_state_t layer_state_set_user(layer_state_t state) { + state = update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST); + return state; +} + + +#ifdef OLED_DRIVER_ENABLE +oled_rotation_t oled_init_user(oled_rotation_t rotation) { + if (is_keyboard_master()) { + return OLED_ROTATION_270; + } else { + return rotation; + } +} + +void render_crkbd_logo(void) { + static const char PROGMEM crkbd_logo[] = { + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94, + 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4, + 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4, + 0}; + oled_write_P(crkbd_logo, false); +} + +# define KEYLOG_LEN 5 +char keylog_str[KEYLOG_LEN] = {}; +uint8_t keylogs_str_idx = 0; +uint16_t log_timer = 0; + +const char code_to_name[60] = { + ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', + 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', + 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', + '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', + 'R', 'E', 'B', 'T', '_', '-', '=', '[', ']', '\\', + '#', ';', '\'', '`', ',', '.', '/', ' ', ' ', ' '}; + +void add_keylog(uint16_t keycode) { + if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) || (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX)) { + keycode = keycode & 0xFF; + } + + for (uint8_t i = KEYLOG_LEN - 1; i > 0; i--) { + keylog_str[i] = keylog_str[i - 1]; + } + if (keycode < 60) { + keylog_str[0] = code_to_name[keycode]; + } + keylog_str[KEYLOG_LEN - 1] = 0; + + log_timer = timer_read(); +} + +void update_log(void) { + if (timer_elapsed(log_timer) > 750) { + add_keylog(0); + } +} + +void render_keylogger_status(void) { + oled_write_P(PSTR("KLogr"), false); + oled_write(keylog_str, false); +} + +void render_default_layer_state(void) { + oled_write_P(PSTR("Lyout"), false); + switch (get_highest_layer(default_layer_state)) { + case _QWERTY: + oled_write_P(PSTR(" QRTY"), false); + break; + } +} + +void render_layer_state(void) { + oled_write_P(PSTR("LAYER"), false); + oled_write_P(PSTR("Lower"), layer_state_is(_LOWER)); + oled_write_P(PSTR("Raise"), layer_state_is(_RAISE)); +} + +void render_keylock_status(uint8_t led_usb_state) { + oled_write_P(PSTR("Lock:"), false); + oled_write_P(PSTR(" "), false); + oled_write_P(PSTR("N"), led_usb_state & (1 << USB_LED_NUM_LOCK)); + oled_write_P(PSTR("C"), led_usb_state & (1 << USB_LED_CAPS_LOCK)); + oled_write_ln_P(PSTR("S"), led_usb_state & (1 << USB_LED_SCROLL_LOCK)); +} + +void render_mod_status(uint8_t modifiers) { + oled_write_P(PSTR("Mods:"), false); + oled_write_P(PSTR(" "), false); + oled_write_P(PSTR("S"), (modifiers & MOD_MASK_SHIFT)); + oled_write_P(PSTR("C"), (modifiers & MOD_MASK_CTRL)); + oled_write_P(PSTR("A"), (modifiers & MOD_MASK_ALT)); + oled_write_P(PSTR("G"), (modifiers & MOD_MASK_GUI)); +} + +void render_bootmagic_status(void) { + /* Show Ctrl-Gui Swap options */ + static const char PROGMEM logo[][2][3] = { + {{0x97, 0x98, 0}, {0xb7, 0xb8, 0}}, + {{0x95, 0x96, 0}, {0xb5, 0xb6, 0}}, + }; + oled_write_P(PSTR("BTMGK"), false); + oled_write_P(PSTR(" "), false); + oled_write_P(logo[0][0], !keymap_config.swap_lctl_lgui); + oled_write_P(logo[1][0], keymap_config.swap_lctl_lgui); + oled_write_P(PSTR(" "), false); + oled_write_P(logo[0][1], !keymap_config.swap_lctl_lgui); + oled_write_P(logo[1][1], keymap_config.swap_lctl_lgui); + oled_write_P(PSTR(" NKRO"), keymap_config.nkro); +} + +void render_status_main(void) { + /* Show Keyboard Layout */ + render_default_layer_state(); + render_keylock_status(host_keyboard_leds()); + render_mod_status(get_mods()); + render_bootmagic_status(); + + render_keylogger_status(); +} + +void oled_task_user(void) { + update_log(); + if (is_master) { + render_status_main(); // Renders the current keyboard state (layer, lock, caps, scroll, etc) + } else { + render_crkbd_logo(); + } +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { + add_keylog(keycode); + } + return true; +} +#endif diff --git a/keyboards/crkbd/keymaps/oled_sample/rules.mk b/keyboards/crkbd/keymaps/oled_sample/rules.mk new file mode 100644 index 000000000000..fb480bba88c9 --- /dev/null +++ b/keyboards/crkbd/keymaps/oled_sample/rules.mk @@ -0,0 +1,7 @@ + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. +OLED_DRIVER_ENABLE = yes diff --git a/keyboards/crkbd/rev1/common/common.c b/keyboards/crkbd/rev1/common/common.c new file mode 100644 index 000000000000..5ea7347de884 --- /dev/null +++ b/keyboards/crkbd/rev1/common/common.c @@ -0,0 +1,21 @@ +/* +Copyright 2019 @foostan +Copyright 2020 Drashna Jaelre <@drashna> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "common.h" + +uint8_t is_master; diff --git a/keyboards/crkbd/rev1/common/common.h b/keyboards/crkbd/rev1/common/common.h new file mode 100644 index 000000000000..af1795f48086 --- /dev/null +++ b/keyboards/crkbd/rev1/common/common.h @@ -0,0 +1,24 @@ +/* +Copyright 2019 @foostan +Copyright 2020 Drashna Jaelre <@drashna> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "rev1.h" + +#define has_usb() is_keyboard_master() +extern uint8_t is_master; diff --git a/keyboards/crkbd/rev1/common/config.h b/keyboards/crkbd/rev1/common/config.h new file mode 100644 index 000000000000..12f5f7576649 --- /dev/null +++ b/keyboards/crkbd/rev1/common/config.h @@ -0,0 +1,30 @@ +/* +Copyright 2019 @foostan +Copyright 2020 Drashna Jaelre <@drashna> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#define PRODUCT Corne Keyboard Rev.1 (Split Common) + +#define USE_SERIAL +#define SOFT_SERIAL_PIN D2 + +#ifdef RGB_MATRIX_ENABLE +# define RGB_MATRIX_SPLIT { 27, 27 } +#endif + +#define DIODE_DIRECTION COL2ROW diff --git a/keyboards/crkbd/rev1/common/keymaps/via/config.h b/keyboards/crkbd/rev1/common/keymaps/via/config.h new file mode 100644 index 000000000000..aa2d45e56d43 --- /dev/null +++ b/keyboards/crkbd/rev1/common/keymaps/via/config.h @@ -0,0 +1,46 @@ +/* +Copyright 2019 @foostan +Copyright 2020 Drashna Jaelre <@drashna> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + + + +#pragma once + +//#define USE_MATRIX_I2C +#ifdef KEYBOARD_crkbd_rev1_legacy +# undef USE_I2C +# define USE_SERIAL +#endif + +/* Select hand configuration */ + +#define MASTER_LEFT +// #define MASTER_RIGHT +// #define EE_HANDS + +#define USE_SERIAL_PD2 + + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 27 +#define RGBLIGHT_LIMIT_VAL 120 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +#define OLED_FONT_H "keyboards/crkbd/lib/glcdfont.c" diff --git a/keyboards/crkbd/rev1/common/keymaps/via/keymap.c b/keyboards/crkbd/rev1/common/keymaps/via/keymap.c new file mode 100644 index 000000000000..a3b2e52ce556 --- /dev/null +++ b/keyboards/crkbd/rev1/common/keymaps/via/keymap.c @@ -0,0 +1,193 @@ +/* +Copyright 2019 @foostan +Copyright 2020 Drashna Jaelre <@drashna> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_split_3x6_3( \ + //,-----------------------------------------------------. ,-----------------------------------------------------. + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ESC, + //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| + KC_LGUI, FN_MO13, KC_SPC, KC_ENT, FN_MO23, KC_RALT + //`--------------------------' `--------------------------' + + ), + + [1] = LAYOUT_split_3x6_3( \ + //,-----------------------------------------------------. ,-----------------------------------------------------. + KC_TAB, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + KC_LCTL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP,KC_RIGHT, XXXXXXX, XXXXXXX, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| + KC_LGUI, _______, KC_SPC, KC_ENT, _______, KC_RALT\ + //`--------------------------' `--------------------------' + ), + + [2] = LAYOUT_split_3x6_3( \ + //,-----------------------------------------------------. ,-----------------------------------------------------. + KC_TAB, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + KC_LCTL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_GRV, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, KC_TILD, + //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| + KC_LGUI, _______, KC_SPC, KC_ENT, _______, KC_RALT + //`--------------------------' `--------------------------' + ), + + [3] = LAYOUT_split_3x6_3( \ + //,-----------------------------------------------------. ,-----------------------------------------------------. + RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\ + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\ + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\ + //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| + KC_LGUI, _______, KC_SPC, KC_ENT, _______, KC_RALT\ + //`--------------------------' `--------------------------' + ) +}; + +#ifdef OLED_DRIVER_ENABLE +oled_rotation_t oled_init_user(oled_rotation_t rotation) { + if (!is_master) { + return OLED_ROTATION_180; // flips the display 180 degrees if offhand + } + return rotation; +} + +#define L_BASE 0 +#define L_LOWER 2 +#define L_RAISE 4 +#define L_ADJUST 8 + +void oled_render_layer_state(void) { + oled_write_P("Layer: ", false); + switch (layer_state) { + case L_BASE: + oled_write_ln_P("Default", false); + break; + case L_LOWER: + oled_write_ln_P("Lower", false); + break; + case L_RAISE: + oled_write_ln_P("Raise", false); + break; + case L_ADJUST: + case L_ADJUST|L_LOWER: + case L_ADJUST|L_RAISE: + case L_ADJUST|L_LOWER|L_RAISE: + oled_write_ln_P("Adjust", false); + break; + } +} + + +char keylog_str[24] = {}; +char keylogs_str[21] = {}; +int keylogs_str_idx = 0; + +const char code_to_name[60] = { + ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', + 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', + 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', + '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', + 'R', 'E', 'B', 'T', '_', '-', '=', '[', ']', '\\', + '#', ';', '\'', '`', ',', '.', '/', ' ', ' ', ' '}; + +void set_keylog(uint16_t keycode, keyrecord_t *record) { + char name = ' '; + if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) || + (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX)) { keycode = keycode & 0xFF; } + if (keycode < 60) { + name = code_to_name[keycode]; + } + + // update keylog + snprintf(keylog_str, sizeof(keylog_str), "%dx%d, k%2d : %c", + record->event.key.row, record->event.key.col, + keycode, name); + + // update keylogs + if (keylogs_str_idx == sizeof(keylogs_str) - 1) { + keylogs_str_idx = 0; + for (int i = 0; i < sizeof(keylogs_str) - 1; i++) { + keylogs_str[i] = ' '; + } + } + + keylogs_str[keylogs_str_idx] = name; + keylogs_str_idx++; +} + +void oled_render_keylog(void) { + oled_write(keylog_str, false); +} +void oled_render_keylogs(void) { + oled_write(keylogs_str, false); +} + +void render_bootmagic_status(bool status) { + /* Show Ctrl-Gui Swap options */ + static const char PROGMEM logo[][2][3] = { + {{0x97, 0x98, 0}, {0xb7, 0xb8, 0}}, + {{0x95, 0x96, 0}, {0xb5, 0xb6, 0}}, + }; + if (status) { + oled_write_ln_P(logo[0][0], false); + oled_write_ln_P(logo[0][1], false); + } else { + oled_write_ln_P(logo[1][0], false); + oled_write_ln_P(logo[1][1], false); + } +} + +void oled_render_logo(void) { + static const char PROGMEM crkbd_logo[] = { + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94, + 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4, + 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4, + 0}; + oled_write_P(crkbd_logo, false); +} + +void oled_task_user(void) { + if (is_master) { + oled_render_layer_state(); + oled_render_keylog(); + // oled_render_keylogs(); + // oled_renger_bootmagic_icon(keymap_config.swap_lalt_lgui); + } else { + oled_render_logo(); + } +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { + set_keylog(keycode, record); + // set_timelog(); + } + return true; +} +#endif // OLED_DRIVER_ENABLE diff --git a/keyboards/crkbd/rev1/common/keymaps/via/rules.mk b/keyboards/crkbd/rev1/common/keymaps/via/rules.mk new file mode 100644 index 000000000000..93b2afed4470 --- /dev/null +++ b/keyboards/crkbd/rev1/common/keymaps/via/rules.mk @@ -0,0 +1,5 @@ +MOUSEKEY_ENABLE = no # Mouse keys +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. +VIA_ENABLE = yes # Enable VIA +OLED_DRIVER_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/crkbd/rev1/common/rules.mk b/keyboards/crkbd/rev1/common/rules.mk new file mode 100644 index 000000000000..0b8106e3f295 --- /dev/null +++ b/keyboards/crkbd/rev1/common/rules.mk @@ -0,0 +1,2 @@ +SPLIT_KEYBOARD = yes +SPLIT_TRANSPORT = mirror # for when Split Mirroring drops, it will maintain mirroring functionality diff --git a/keyboards/crkbd/rev1/common/ssd1306.c b/keyboards/crkbd/rev1/common/ssd1306.c new file mode 100644 index 000000000000..4a889da6738f --- /dev/null +++ b/keyboards/crkbd/rev1/common/ssd1306.c @@ -0,0 +1,360 @@ +#ifdef SSD1306OLED + +#include "ssd1306.h" +#include "i2c_master.h" +#include +#include "print.h" +#ifdef ADAFRUIT_BLE_ENABLE +#include "adafruit_ble.h" +#endif +#ifdef PROTOCOL_LUFA +#include "lufa.h" +#endif +#include "sendchar.h" +#include "timer.h" + +struct CharacterMatrix display; + +extern const unsigned char font[] PROGMEM; + +#ifndef OLED_BLANK_CHAR +#define OLED_BLANK_CHAR ' ' +#endif + +#ifndef OLED_BITS_FILTER +#define OLED_BITS_FILTER +#endif + +// Set this to 1 to help diagnose early startup problems +// when testing power-on with ble. Turn it off otherwise, +// as the latency of printing most of the debug info messes +// with the matrix scan, causing keys to drop. +#define DEBUG_TO_SCREEN 0 + +//static uint16_t last_battery_update; +//static uint32_t vbat; +//#define BatteryUpdateInterval 10000 /* milliseconds */ + +// 'last_flush' is declared as uint16_t, +// so this must be less than 65535 +#ifndef ScreenOffInterval +#define ScreenOffInterval 60000 /* milliseconds */ +#endif + +#if DEBUG_TO_SCREEN +static uint8_t displaying; +#endif +static uint16_t last_flush; + +static bool force_dirty = true; + +// Write command sequence. +// Returns true on success. +static inline bool _send_cmd1(uint8_t cmd) { + bool res = false; + + if (i2c_start(SSD1306_ADDRESS, 100)) { + xprintf("failed to start write to %d\n", SSD1306_ADDRESS); + goto done; + } + + if (i2c_write(0x0 /* command byte follows */, 100)) { + print("failed to write control byte\n"); + + goto done; + } + + if (i2c_write(cmd, 100)) { + xprintf("failed to write command %d\n", cmd); + goto done; + } + res = true; +done: + i2c_stop(); + return res; +} + +#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;} +#define send_cmds(c) if (!_send_cmds(c,sizeof(c))) {goto done;} +#define cmd1(X) X +#define cmd2(X,Y) X,Y +#define cmd3(X,Y,Z) X,Y,Z + +static bool _send_cmds(const uint8_t* p,uint8_t sz) { + for(uint8_t i=sz;i;i--) { + send_cmd1( pgm_read_byte(p++) ); + } + return true; +done: + return false; +} + +#define SEND_CMDS(...) {static const uint8_t _cmds[] PROGMEM = { __VA_ARGS__,0 };send_cmds(_cmds);} + +static void clear_display(void) { + matrix_clear(&display); + + // Clear all of the display bits (there can be random noise + // in the RAM on startup) + SEND_CMDS( + cmd3(PageAddr, 0, (DisplayHeight / 8) - 1), + cmd3(ColumnAddr, 0, DisplayWidth - 1) + ); + + if (i2c_start(SSD1306_ADDRESS, 100)) { + goto done; + } + if (i2c_write(0x40, 100)) { + // Data mode + goto done; + } + for (uint8_t row = MatrixRows;row; row--) { + for (uint8_t col = DisplayWidth; col; col--) { + i2c_write(0, 100); + } + } + + display.dirty = false; + +done: + i2c_stop(); +} + +#if DEBUG_TO_SCREEN +#undef sendchar +static int8_t capture_sendchar(uint8_t c) { + sendchar(c); + iota_gfx_write_char(c); + + if (!displaying) { + iota_gfx_flush(); + } + return 0; +} +#endif + +bool iota_gfx_init(bool rotate) { + bool success = false; + + i2c_init(); + SEND_CMDS( + cmd1(DisplayOff), + cmd2(SetDisplayClockDiv, 0x80), + cmd2(SetMultiPlex, DisplayHeight - 1), + cmd2(SetDisplayOffset, 0), + cmd1(SetStartLine | 0x0), + cmd2(SetChargePump, 0x14 /* Enable */), + cmd2(SetMemoryMode, 0 /* horizontal addressing */) + ); + + if(rotate){ + // the following Flip the display orientation 180 degrees + SEND_CMDS( + cmd1(SegRemap), + cmd1(ComScanInc) + ); + }else{ + // Flips the display orientation 0 degrees + SEND_CMDS( + cmd1(SegRemap | 0x1), + cmd1(ComScanDec) + ); + } + + SEND_CMDS( +#ifdef SSD1306_128X64 + cmd2(SetComPins, 0x12), +#else + cmd2(SetComPins, 0x2), +#endif + cmd2(SetContrast, 0x8f), + cmd2(SetPreCharge, 0xf1), + cmd2(SetVComDetect, 0x40), + cmd1(DisplayAllOnResume), + cmd1(NormalDisplay), + cmd1(DeActivateScroll), + cmd1(DisplayOn), + + cmd2(SetContrast, 0) // Dim + ); + + clear_display(); + + success = true; + + iota_gfx_flush(); + +#if DEBUG_TO_SCREEN + print_set_sendchar(capture_sendchar); +#endif + +done: + return success; +} + +bool iota_gfx_off(void) { + bool success = false; + + send_cmd1(DisplayOff); + success = true; + +done: + return success; +} + +bool iota_gfx_on(void) { + bool success = false; + + send_cmd1(DisplayOn); + success = true; + +done: + return success; +} + +void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) { + *matrix->cursor = c; + ++matrix->cursor; + + if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) { + // We went off the end; scroll the display upwards by one line + memmove(&matrix->display[0], &matrix->display[1], + MatrixCols * (MatrixRows - 1)); + matrix->cursor = &matrix->display[MatrixRows - 1][0]; + memset(matrix->cursor, OLED_BLANK_CHAR, MatrixCols); + } +} + +void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) { + matrix->dirty = true; + + if (c == '\n') { + // Clear to end of line from the cursor and then move to the + // start of the next line + uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols; + + while (cursor_col++ < MatrixCols) { + matrix_write_char_inner(matrix, OLED_BLANK_CHAR); + } + return; + } + + matrix_write_char_inner(matrix, c); +} + +void iota_gfx_write_char(uint8_t c) { + matrix_write_char(&display, c); +} + +void matrix_write(struct CharacterMatrix *matrix, const char *data) { + while (*data) { + matrix_write_char(matrix, *data); + ++data; + } +} + +void matrix_write_ln(struct CharacterMatrix *matrix, const char *data) { + matrix_write(matrix, data); + matrix_write(matrix, "\n"); +} + +void iota_gfx_write(const char *data) { + matrix_write(&display, data); +} + +void matrix_write_P(struct CharacterMatrix *matrix, const char *data) { + while (true) { + uint8_t c = pgm_read_byte(data); + if (c == 0) { + return; + } + matrix_write_char(matrix, c); + ++data; + } +} + +void iota_gfx_write_P(const char *data) { + matrix_write_P(&display, data); +} + +void matrix_clear(struct CharacterMatrix *matrix) { + memset(matrix->display, OLED_BLANK_CHAR, sizeof(matrix->display)); + matrix->cursor = &matrix->display[0][0]; + matrix->dirty = true; +} + +void iota_gfx_clear_screen(void) { + matrix_clear(&display); +} + +void matrix_render(struct CharacterMatrix *matrix) { + last_flush = timer_read(); + iota_gfx_on(); +#if DEBUG_TO_SCREEN + ++displaying; +#endif + + // Move to the home position + SEND_CMDS( + cmd3(PageAddr, 0, MatrixRows - 1), + cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1) + ); + + if (i2c_write(SSD1306_ADDRESS, 100)) { + goto done; + } + if (i2c_write(0x40, 100)) { + // Data mode + goto done; + } + + for (uint8_t row = 0; row < MatrixRows; ++row) { + for (uint8_t col = 0; col < MatrixCols; ++col) { + const uint8_t *glyph = font + (matrix->display[row][col] * FontWidth); + + for (uint8_t glyphCol = 0; glyphCol < FontWidth; ++glyphCol) { + uint8_t colBits = pgm_read_byte(glyph + glyphCol); + i2c_write(colBits OLED_BITS_FILTER, 100); + } + + // 1 column of space between chars (it's not included in the glyph) + //i2c_master_write(0); + } + } + + matrix->dirty = false; + +done: + i2c_stop(); +#if DEBUG_TO_SCREEN + --displaying; +#endif +} + +void iota_gfx_flush(void) { + matrix_render(&display); +} + +__attribute__ ((weak)) +void iota_gfx_task_user(void) { +} + +void iota_gfx_task(void) { + iota_gfx_task_user(); + + if (display.dirty|| force_dirty) { + iota_gfx_flush(); + force_dirty = false; + } + + if (ScreenOffInterval !=0 && timer_elapsed(last_flush) > ScreenOffInterval) { + iota_gfx_off(); + } +} + +bool process_record_gfx(uint16_t keycode, keyrecord_t *record) { + force_dirty = true; + return true; +} + +#endif diff --git a/keyboards/crkbd/rev1/config.h b/keyboards/crkbd/rev1/config.h index f7f278f2c0f6..60bd379724eb 100644 --- a/keyboards/crkbd/rev1/config.h +++ b/keyboards/crkbd/rev1/config.h @@ -1,6 +1,6 @@ /* -Copyright 2012 Jun Wako -Copyright 2015 Jack Humbert +Copyright 2019 @foostan +Copyright 2020 Drashna Jaelre <@drashna> This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -18,64 +18,15 @@ along with this program. If not, see . #pragma once -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x3060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER foostan -#define PRODUCT Corne Keyboard (crkbd) -#define DESCRIPTION A split keyboard with 3x6 vertically staggered keys and 3 thumb keys - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 8 -#define MATRIX_COLS 6 -#define MATRIX_ROW_PINS { D4, C6, D7, E6 } - -// wiring of each half -#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 } -// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -// #define BACKLIGHT_LEVELS 3 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - /* ws2812 RGB LED */ #define RGB_DI_PIN D3 #ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 12 // Number of LEDs +# define RGBLED_NUM 12 // Number of LEDs +# define RGBLIGHT_SPLIT #endif #ifdef RGB_MATRIX_ENABLE -#define RGBLED_NUM 54 // Number of LEDs -#define DRIVER_LED_TOTAL RGBLED_NUM +# define RGBLED_NUM 54 // Number of LEDs +# define DRIVER_LED_TOTAL RGBLED_NUM #endif - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION diff --git a/keyboards/crkbd/rev1/legacy/config.h b/keyboards/crkbd/rev1/legacy/config.h new file mode 100644 index 000000000000..9e3676414c96 --- /dev/null +++ b/keyboards/crkbd/rev1/legacy/config.h @@ -0,0 +1,23 @@ +/* +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include + +#define PRODUCT Corne Keyboard Rev.1 (Legacy Split) diff --git a/keyboards/crkbd/i2c.c b/keyboards/crkbd/rev1/legacy/i2c.c similarity index 98% rename from keyboards/crkbd/i2c.c rename to keyboards/crkbd/rev1/legacy/i2c.c index 4bee5c639829..7b45c3f86664 100644 --- a/keyboards/crkbd/i2c.c +++ b/keyboards/crkbd/rev1/legacy/i2c.c @@ -6,7 +6,7 @@ #include #include "i2c.h" -#ifdef USE_I2C +#if defined(USE_I2C) || defined(USE_MATRIX_I2C) // Limits the amount of we wait for any one i2c transaction. // Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is diff --git a/keyboards/crkbd/i2c.h b/keyboards/crkbd/rev1/legacy/i2c.h similarity index 100% rename from keyboards/crkbd/i2c.h rename to keyboards/crkbd/rev1/legacy/i2c.h diff --git a/keyboards/crkbd/rev1/legacy/legacy.c b/keyboards/crkbd/rev1/legacy/legacy.c new file mode 100644 index 000000000000..595ff1eaf748 --- /dev/null +++ b/keyboards/crkbd/rev1/legacy/legacy.c @@ -0,0 +1,19 @@ +/* +Copyright 2019 @foostan +Copyright 2020 Drashna Jaelre <@drashna> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "legacy.h" diff --git a/keyboards/crkbd/rev1/legacy/legacy.h b/keyboards/crkbd/rev1/legacy/legacy.h new file mode 100644 index 000000000000..6c6308e592c9 --- /dev/null +++ b/keyboards/crkbd/rev1/legacy/legacy.h @@ -0,0 +1,21 @@ +/* +Copyright 2019 @foostan +Copyright 2020 Drashna Jaelre <@drashna> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "rev1.h" diff --git a/keyboards/crkbd/rev1/matrix.c b/keyboards/crkbd/rev1/legacy/matrix.c similarity index 100% rename from keyboards/crkbd/rev1/matrix.c rename to keyboards/crkbd/rev1/legacy/matrix.c diff --git a/keyboards/crkbd/rev1/legacy/post_config.h b/keyboards/crkbd/rev1/legacy/post_config.h new file mode 100644 index 000000000000..b3d6346cc8cf --- /dev/null +++ b/keyboards/crkbd/rev1/legacy/post_config.h @@ -0,0 +1,27 @@ +/* +Copyright 2019 @foostan +Copyright 2020 Drashna Jaelre <@drashna> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#ifdef SSD1306OLED +# define USE_I2C +#endif + +#if defined(OLED_DRIVER_ENABLE) && (defined(USE_I2C) || defined(USE_MATRIX_I2C)) +# error Cannot use both legacy i2c driver and new i2c_master driver at the same time. Undefine USE_I2C and/or USE_MATRIX_I2C +#endif diff --git a/keyboards/crkbd/rev1/legacy/rules.mk b/keyboards/crkbd/rev1/legacy/rules.mk new file mode 100644 index 000000000000..2bef242977ae --- /dev/null +++ b/keyboards/crkbd/rev1/legacy/rules.mk @@ -0,0 +1,7 @@ +CUSTOM_MATRIX = yes + +SRC += matrix.c \ + split_util.c \ + split_scomm.c + +QUANTUM_LIB_SRC += i2c.c serial.c diff --git a/keyboards/crkbd/serial.c b/keyboards/crkbd/rev1/legacy/serial.c similarity index 100% rename from keyboards/crkbd/serial.c rename to keyboards/crkbd/rev1/legacy/serial.c diff --git a/keyboards/crkbd/serial.h b/keyboards/crkbd/rev1/legacy/serial.h similarity index 100% rename from keyboards/crkbd/serial.h rename to keyboards/crkbd/rev1/legacy/serial.h diff --git a/keyboards/crkbd/rev1/legacy/serial_config.h b/keyboards/crkbd/rev1/legacy/serial_config.h new file mode 100644 index 000000000000..40d11d4de298 --- /dev/null +++ b/keyboards/crkbd/rev1/legacy/serial_config.h @@ -0,0 +1,22 @@ +/* +Copyright 2019 @foostan +Copyright 2020 Drashna Jaelre <@drashna> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef SOFT_SERIAL_PIN +#define SOFT_SERIAL_PIN D2 +#define SERIAL_USE_MULTI_TRANSACTION +#endif diff --git a/keyboards/crkbd/rev1/legacy/serial_config_simpleapi.h b/keyboards/crkbd/rev1/legacy/serial_config_simpleapi.h new file mode 100644 index 000000000000..bd152ddda34b --- /dev/null +++ b/keyboards/crkbd/rev1/legacy/serial_config_simpleapi.h @@ -0,0 +1,23 @@ +/* +Copyright 2019 @foostan +Copyright 2020 Drashna Jaelre <@drashna> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#undef SERIAL_USE_MULTI_TRANSACTION +#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 +#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 diff --git a/keyboards/crkbd/rev1/split_scomm.c b/keyboards/crkbd/rev1/legacy/split_scomm.c similarity index 79% rename from keyboards/crkbd/rev1/split_scomm.c rename to keyboards/crkbd/rev1/legacy/split_scomm.c index 12b00f6840f6..c14bb32a4343 100644 --- a/keyboards/crkbd/rev1/split_scomm.c +++ b/keyboards/crkbd/rev1/legacy/split_scomm.c @@ -1,3 +1,21 @@ +/* +Copyright 2019 @foostan +Copyright 2020 Drashna Jaelre <@drashna> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + #ifdef USE_SERIAL #ifdef SERIAL_USE_MULTI_TRANSACTION /* --- USE flexible API (using multi-type transaction function) --- */ diff --git a/keyboards/crkbd/rev1/split_scomm.h b/keyboards/crkbd/rev1/legacy/split_scomm.h similarity index 51% rename from keyboards/crkbd/rev1/split_scomm.h rename to keyboards/crkbd/rev1/legacy/split_scomm.h index 873d8939d81f..47f0ca1b9d16 100644 --- a/keyboards/crkbd/rev1/split_scomm.h +++ b/keyboards/crkbd/rev1/legacy/split_scomm.h @@ -1,3 +1,21 @@ +/* +Copyright 2019 @foostan +Copyright 2020 Drashna Jaelre <@drashna> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + #ifndef SPLIT_COMM_H #define SPLIT_COMM_H diff --git a/keyboards/crkbd/rev1/split_util.c b/keyboards/crkbd/rev1/legacy/split_util.c similarity index 76% rename from keyboards/crkbd/rev1/split_util.c rename to keyboards/crkbd/rev1/legacy/split_util.c index b642a734cc52..d0fee04ad648 100644 --- a/keyboards/crkbd/rev1/split_util.c +++ b/keyboards/crkbd/rev1/legacy/split_util.c @@ -1,3 +1,21 @@ +/* +Copyright 2019 @foostan +Copyright 2020 Drashna Jaelre <@drashna> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + #include #include #include @@ -14,7 +32,7 @@ #endif #ifdef USE_MATRIX_I2C -# include "i2c.h" +# include "i2c_master.h" #else # include "split_scomm.h" #endif @@ -81,7 +99,7 @@ __attribute__((weak)) bool has_usb(void) { static void keyboard_master_setup(void) { #ifdef USE_MATRIX_I2C - i2c_master_init(); + i2c_init(); #else serial_master_init(); #endif diff --git a/keyboards/crkbd/rev1/legacy/split_util.h b/keyboards/crkbd/rev1/legacy/split_util.h new file mode 100644 index 000000000000..414763bff268 --- /dev/null +++ b/keyboards/crkbd/rev1/legacy/split_util.h @@ -0,0 +1,37 @@ +/* +Copyright 2019 @foostan +Copyright 2020 Drashna Jaelre <@drashna> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef SPLIT_KEYBOARD_UTIL_H +#define SPLIT_KEYBOARD_UTIL_H + +#include +#include "eeconfig.h" + +#define SLAVE_I2C_ADDRESS 0x32 + +extern volatile bool isLeftHand; + +// slave version of matix scan, defined in matrix.c +void matrix_slave_scan(void); + +void split_keyboard_setup(void); +bool has_usb(void); + +void matrix_master_OLED_init (void); + +#endif diff --git a/keyboards/crkbd/ssd1306.c b/keyboards/crkbd/rev1/legacy/ssd1306.c similarity index 98% rename from keyboards/crkbd/ssd1306.c rename to keyboards/crkbd/rev1/legacy/ssd1306.c index b2676f386f24..b04b7e15c1ad 100644 --- a/keyboards/crkbd/ssd1306.c +++ b/keyboards/crkbd/rev1/legacy/ssd1306.c @@ -10,6 +10,8 @@ #include "sendchar.h" #include "timer.h" +struct CharacterMatrix display; + extern const unsigned char font[] PROGMEM; #ifndef OLED_BLANK_CHAR @@ -132,7 +134,7 @@ bool iota_gfx_init(bool rotate) { bool success = false; i2c_master_init(); - SEND_CMDS( + SEND_CMDS( cmd1(DisplayOff), cmd2(SetDisplayClockDiv, 0x80), cmd2(SetMultiPlex, DisplayHeight - 1), @@ -144,19 +146,19 @@ bool iota_gfx_init(bool rotate) { if(rotate){ // the following Flip the display orientation 180 degrees - SEND_CMDS( + SEND_CMDS( cmd1(SegRemap), cmd1(ComScanInc) ); }else{ // Flips the display orientation 0 degrees - SEND_CMDS( + SEND_CMDS( cmd1(SegRemap | 0x1), cmd1(ComScanDec) ); } - SEND_CMDS( + SEND_CMDS( #ifdef SSD1306_128X64 cmd2(SetComPins, 0x12), #else @@ -169,10 +171,10 @@ bool iota_gfx_init(bool rotate) { cmd1(NormalDisplay), cmd1(DeActivateScroll), cmd1(DisplayOn), - + cmd2(SetContrast, 0) // Dim ); - + clear_display(); success = true; diff --git a/keyboards/crkbd/rev1/rev1.c b/keyboards/crkbd/rev1/rev1.c index b26292af5bfd..5e4e6560f00b 100644 --- a/keyboards/crkbd/rev1/rev1.c +++ b/keyboards/crkbd/rev1/rev1.c @@ -1,4 +1,21 @@ -#include "crkbd.h" +/* +Copyright 2019 @foostan +Copyright 2020 Drashna Jaelre <@drashna> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "rev1.h" #ifdef RGB_MATRIX_ENABLE @@ -68,11 +85,12 @@ led_config_t g_led_config = { { } }; #endif -__attribute__((weak)) -void matrix_init_user(void) {} - void matrix_init_kb(void) { +#ifdef KEYBOARD_crkbd_rev1_common + is_master = (uint8_t)is_keyboard_master(); +#endif + #ifdef RGB_MATRIX_ENABLE if (!isLeftHand) { g_led_config = (led_config_t){ { @@ -107,3 +125,9 @@ void matrix_init_kb(void) { #endif matrix_init_user(); } + +#ifdef SSD1306OLED +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + return process_record_gfx(keycode,record) && process_record_user(keycode, record); +} +#endif diff --git a/keyboards/crkbd/rev1/rev1.h b/keyboards/crkbd/rev1/rev1.h index 2244b87f177b..ce88068e64af 100644 --- a/keyboards/crkbd/rev1/rev1.h +++ b/keyboards/crkbd/rev1/rev1.h @@ -1,25 +1,41 @@ +/* +Copyright 2019 @foostan +Copyright 2020 Drashna Jaelre <@drashna> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + #pragma once +extern uint8_t is_master; + #include "crkbd.h" +#if defined(KEYBOARD_crkbd_rev1_legacy) +# include "legacy.h" +#elif defined(KEYBOARD_crkbd_rev1_common) +# include "common.h" +#endif #include "quantum.h" - +#include "split_util.h" #ifdef PROTOCOL_LUFA - #include "lufa.h" - #include "split_util.h" +# include "lufa.h" #endif - #ifdef SSD1306OLED - #include "ssd1306.h" +# include "ssd1306.h" #endif -#ifdef USE_I2C - #include - #ifdef __AVR__ - #include - #include - #endif -#endif // clang-format off #define LAYOUT_split_3x6_3( \ @@ -62,7 +78,7 @@ L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ L30, L31, L32, R30, R31, R32 \ ) \ - LAYOUT( \ + LAYOUT_split_3x6_3( \ KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \ KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \ KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \ diff --git a/keyboards/crkbd/rev1/rules.mk b/keyboards/crkbd/rev1/rules.mk index 21cee6bcf719..6bc5a5b03890 100644 --- a/keyboards/crkbd/rev1/rules.mk +++ b/keyboards/crkbd/rev1/rules.mk @@ -1,5 +1,3 @@ -SRC += matrix.c \ - split_util.c \ - split_scomm.c +LIB_SRC += ssd1306.c -LAYOUTS = split_3x5_3 split_3x6_3 +DEFAULT_FOLDER = crkbd/rev1/legacy diff --git a/keyboards/crkbd/rev1/serial_config.h b/keyboards/crkbd/rev1/serial_config.h deleted file mode 100644 index 4fab8e8ddfcf..000000000000 --- a/keyboards/crkbd/rev1/serial_config.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef SOFT_SERIAL_PIN -#define SOFT_SERIAL_PIN D2 -#define SERIAL_USE_MULTI_TRANSACTION -#endif diff --git a/keyboards/crkbd/rev1/serial_config_simpleapi.h b/keyboards/crkbd/rev1/serial_config_simpleapi.h deleted file mode 100644 index 0e1dd9e4acb2..000000000000 --- a/keyboards/crkbd/rev1/serial_config_simpleapi.h +++ /dev/null @@ -1,5 +0,0 @@ -#pragma once - -#undef SERIAL_USE_MULTI_TRANSACTION -#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 diff --git a/keyboards/crkbd/rev1/split_util.h b/keyboards/crkbd/rev1/split_util.h deleted file mode 100644 index 687ca19bd3e5..000000000000 --- a/keyboards/crkbd/rev1/split_util.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef SPLIT_KEYBOARD_UTIL_H -#define SPLIT_KEYBOARD_UTIL_H - -#include -#include "eeconfig.h" - -#define SLAVE_I2C_ADDRESS 0x32 - -extern volatile bool isLeftHand; - -// slave version of matix scan, defined in matrix.c -void matrix_slave_scan(void); - -void split_keyboard_setup(void); -bool has_usb(void); - -void matrix_master_OLED_init (void); - -#endif diff --git a/keyboards/crkbd/ssd1306.h b/keyboards/crkbd/rev1/ssd1306.h similarity index 98% rename from keyboards/crkbd/ssd1306.h rename to keyboards/crkbd/rev1/ssd1306.h index 0ca093093a17..11a3cc67f449 100644 --- a/keyboards/crkbd/ssd1306.h +++ b/keyboards/crkbd/rev1/ssd1306.h @@ -65,7 +65,7 @@ struct CharacterMatrix { bool dirty; }; -struct CharacterMatrix display; +extern struct CharacterMatrix display; bool iota_gfx_init(bool rotate); void iota_gfx_task(void); diff --git a/keyboards/crkbd/rules.mk b/keyboards/crkbd/rules.mk index 16d05b589d62..30de5b388db2 100644 --- a/keyboards/crkbd/rules.mk +++ b/keyboards/crkbd/rules.mk @@ -31,12 +31,8 @@ RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -CUSTOM_MATRIX = yes -QUANTUM_LIB_SRC += i2c.c \ - serial.c -SRC += ssd1306.c - # if firmware size over limit, try this option # CFLAGS += -flto +LAYOUTS = split_3x5_3 split_3x6_3 -DEFAULT_FOLDER = crkbd/rev1 +DEFAULT_FOLDER = crkbd/rev1/legacy diff --git a/keyboards/dm9records/plaid/keymaps/default/keymap.c b/keyboards/dm9records/plaid/keymaps/default/keymap.c index 6a858a4a7302..c5075b0e0c47 100644 --- a/keyboards/dm9records/plaid/keymaps/default/keymap.c +++ b/keyboards/dm9records/plaid/keymaps/default/keymap.c @@ -214,6 +214,10 @@ led_config_t led_config; //Set leds to saved state during powerup void keyboard_post_init_user(void) { + // set LED pin modes + setPinOutput(LED_RED); + setPinOutput(LED_GREEN); + // Call the post init code. led_config.raw = eeconfig_read_user(); diff --git a/keyboards/dm9records/plaid/keymaps/stephen-huan/config.h b/keyboards/dm9records/plaid/keymaps/stephen-huan/config.h new file mode 100644 index 000000000000..5733b9e4b046 --- /dev/null +++ b/keyboards/dm9records/plaid/keymaps/stephen-huan/config.h @@ -0,0 +1,19 @@ +/* Copyright 2019 Takuya Urakawa (dm9records.com) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// place overrides here diff --git a/keyboards/dm9records/plaid/keymaps/stephen-huan/keymap.c b/keyboards/dm9records/plaid/keymaps/stephen-huan/keymap.c new file mode 100644 index 000000000000..c8d48c395512 --- /dev/null +++ b/keyboards/dm9records/plaid/keymaps/stephen-huan/keymap.c @@ -0,0 +1,356 @@ +/* Copyright 2019 Takuya Urakawa (dm9records.com) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + + +enum plaid_layers { + _QWERTY, + _LOWER, + _RAISE, + _ADJUST +}; + +enum plaid_keycodes { + QWERTY = SAFE_RANGE, + LED_1, + LED_2, + LED_3, + LED_4, + LED_5, + LED_6, + LED_7, + LED_8, + LED_9, + LED_0 +}; + +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) + +// array of keys considered modifiers for led purposes +const uint16_t modifiers[] = { + KC_LCTL, + KC_RCTL, + KC_LALT, + KC_RALT, + KC_LSFT, + KC_RSFT, + KC_LGUI, + KC_RGUI, + LOWER, + RAISE +}; + +//Setup consts for LED modes +#define LEDMODE_ON 1 //always on +#define LEDMODE_OFF 0 //always off +#define LEDMODE_MODS 2 //On with modifiers +#define LEDMODE_BLINKIN 3 //blinkinlights - % chance toggle on keypress +#define LEDMODE_KEY 4 //On with any keypress, off with key release +#define LEDMODE_ENTER 5 // On with enter key + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * |Esc/hy| A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | fn | Alt | GUI |Lower | Space |Raise | GUI | Alt |Shift | Ctrl | + * `-----------------------------------------------------------------------------------' + * (karabiner remaps Caps lock -> fn) + */ +[_QWERTY] = LAYOUT_plaid_grid( + KC_TAB , KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + HYPR_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_RSFT , KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , + KC_RCTL , KC_CAPS, KC_RALT, KC_RGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_RGUI, KC_RALT, KC_RSFT, KC_RCTL +), + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | Prev | Vol- | Play | + * `-----------------------------------------------------------------------------------' + * volume up key repeats randomly on mac, have to use mac specific volume + */ +[_LOWER] = LAYOUT_plaid_grid( + KC_GRV , KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0 , KC_BSPC, + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC , KC_BSLS, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______ , _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC__VOLDOWN, KC_MPLY +), + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ~ | | | End | | | |Pg Up | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | Home | |Pg Dn | | | Left | Down | Up |Right | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | Copy |Paste | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | Next | Vol+ | Mute | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = LAYOUT_plaid_grid( + KC_TILD, _______, _______, KC_END, _______, _______, _______, KC_PGUP, _______, _______, _______ , KC_DEL , + _______, KC_HOME, _______, KC_PGDN, _______, _______, KC_LEFT, KC_DOWN, KC_UP , KC_RGHT, _______ , _______, + _______, _______, _______, KC_COPY, KC_PSTE, KC_PGDN, _______, _______, _______, _______, _______ , _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC__VOLUP, KC_MUTE +), + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * |Reset | Red |Green | Rmod | Gmod |Rblink|Gblink| Rkey | Gkey | Rcar | Gcar | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | |Power |Sleep |Wake |Eject | | | | | | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = LAYOUT_plaid_grid( + RESET , LED_1 , LED_2 , LED_3 , LED_4 , LED_5 ,LED_6 , LED_7 , LED_8 , LED_9 , LED_0 , _______ , + _______, KC_PWR , KC_SLEP, KC_WAKE, KC_EJCT, _______, _______, _______, _______, _______, _______, _______ , + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ , + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +) + + +}; + +//Setup config struct for LED +typedef union { + uint32_t raw; + struct { + uint8_t red_mode :8; + uint8_t green_mode :8; + }; +} led_config_t; +led_config_t led_config; + +//Set leds to saved state during powerup +void keyboard_post_init_user(void) { + // set LED pin modes + setPinOutput(LED_RED); + setPinOutput(LED_GREEN); + + // Call the post init code. + led_config.raw = eeconfig_read_user(); + + if(led_config.red_mode == LEDMODE_ON) { + writePinHigh(LED_RED); + } + + if(led_config.green_mode == LEDMODE_ON) { + writePinHigh(LED_GREEN); + } +} + +void eeconfig_init_user(void) { // EEPROM is getting reset! + led_config.raw = 0; + led_config.red_mode = LEDMODE_ON; + led_config.green_mode = LEDMODE_MODS; + eeconfig_update_user(led_config.raw); +} + +layer_state_t layer_state_set_user(layer_state_t state) { + return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); +} + +void led_keypress_update(uint8_t led, uint8_t led_mode, uint16_t keycode, keyrecord_t *record) { + switch (led_mode) { + case LEDMODE_MODS: + for (int i=0;ievent.pressed) { + writePinHigh(led); + } + else { + writePinLow(led); + } + } + } + break; + case LEDMODE_BLINKIN: + if (record->event.pressed) { + + /* Markov Chain + * + * 1 - x 1 - y + * /---\ /---\ + * v | v | + * /------\ x /------\ + * | |------>| | + * | on | y | off | + * | |<------| | + * \------/ \------/ + */ + + /* Non-homogeneous Markov Chain + * + * /-----\ 1 - x0 /-----\ 1 - x1 /-----\ + * |on 0|------->|on 1|------->|on 2|----> ... + * \-----/\ /\-----/\ /\-----/\ + * \ / \ / . + * x0\ / x1\ / . + * \/ \/ . + * /\ /\ + * y0/ \ y1/ \ . + * / \ / \ . + * / \ / \ . + * /-----\ 1 - y0 /-----\ 1 - y1 /-----\/ + * |off 0|------->|off 1|------->|off 2|----> ... + * \-----/ \-----/ \-----/ + * + * + * if x = 1/4 and y 1/4, behavior is equivalent to the original code + * and converges to a steady state at the rate of 1/2^k + * where k is the number of key presses + * (the distance from a given vector to the steady state, [1/2, 1/2], + * is cut in half every key press) + * + * if x = y, then it is guaranteed that the steady state is still + * [1/2, 1/2], but the rate at which it converges is variable + * + * if x != y, then there is no well-defined steady state + */ + + double x = (1.0*rand())/RAND_MAX; + double y = x; + + double p = (readPin(led)) ? x : y; + if (rand() < p*RAND_MAX) { + togglePin(led); + } + + /* following code is restriced to x + y <= 1 + * if(rand() % 2 == 1) { */ + /* if(rand() % 2 == 0) { */ + /* writePinLow(led); */ + /* } */ + /* else { */ + /* writePinHigh(led); */ + /* } */ + /* } */ + } + break; + case LEDMODE_KEY: + if (record->event.pressed) { + writePinHigh(led); + return; + } + else { + writePinLow(led); + return; + } + break; + case LEDMODE_ENTER: + if (keycode==KC_ENT) { + writePinHigh(led); + } + else { + writePinLow(led); + } + break; + + } +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + /* If the either led mode is keypressed based, call the led updater + then let it fall through the keypress handlers. Just to keep + the logic out of this procedure */ + if (led_config.red_mode >= LEDMODE_MODS && led_config.red_mode <= LEDMODE_ENTER) { + led_keypress_update(LED_RED, led_config.red_mode, keycode, record); + } + if (led_config.green_mode >= LEDMODE_MODS && led_config.green_mode <= LEDMODE_ENTER) { + led_keypress_update(LED_GREEN, led_config.green_mode, keycode, record); + } + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + print("mode just switched to qwerty and this is a huge string\n"); + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case LED_1: + if (record->event.pressed) { + if (led_config.red_mode==LEDMODE_ON) { + led_config.red_mode=LEDMODE_OFF; + writePinLow(LED_RED); + } + else { + led_config.red_mode=LEDMODE_ON; + writePinHigh(LED_RED); + } + } + break; + case LED_2: + if (record->event.pressed) { + if (led_config.green_mode==LEDMODE_ON) { + led_config.green_mode=LEDMODE_OFF; + writePinLow(LED_GREEN); + } + else { + led_config.green_mode=LEDMODE_ON; + writePinHigh(LED_GREEN); + } + } + break; + case LED_3: + led_config.red_mode=LEDMODE_MODS; + break; + case LED_4: + led_config.green_mode=LEDMODE_MODS; + break; + case LED_5: + led_config.red_mode=LEDMODE_BLINKIN; + break; + case LED_6: + led_config.green_mode=LEDMODE_BLINKIN; + break; + case LED_7: + led_config.red_mode=LEDMODE_KEY; + break; + case LED_8: + led_config.green_mode=LEDMODE_KEY; + break; + case LED_9: + led_config.red_mode=LEDMODE_ENTER; + break; + case LED_0: + led_config.green_mode=LEDMODE_ENTER; + break; + } + + if (keycode >= LED_1 && keycode <= LED_0) { + eeconfig_update_user(led_config.raw); + } + + return true; +} diff --git a/keyboards/dm9records/plaid/keymaps/stephen-huan/readme.md b/keyboards/dm9records/plaid/keymaps/stephen-huan/readme.md new file mode 100644 index 000000000000..e52d24c3dfd6 --- /dev/null +++ b/keyboards/dm9records/plaid/keymaps/stephen-huan/readme.md @@ -0,0 +1 @@ +# stephen-huan's keymap for Plaid diff --git a/keyboards/donutcables/budget96/config.h b/keyboards/donutcables/budget96/config.h index 9482867fa725..7154a67a8cf9 100644 --- a/keyboards/donutcables/budget96/config.h +++ b/keyboards/donutcables/budget96/config.h @@ -1,5 +1,5 @@ /* -Copyright 2017 Luiz Ribeiro +Copyright 2020 DonutCables This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -19,11 +19,11 @@ along with this program. If not, see . #include "config_common.h" -#define VENDOR_ID 0x20A0 -#define PRODUCT_ID 0x422D -#define DEVICE_VER 0x0200 +#define VENDOR_ID 0xDCDC +#define PRODUCT_ID 0x0002 +#define DEVICE_VER 0x0001 #define MANUFACTURER DonutCables -#define PRODUCT budget96 +#define PRODUCT Budget96 #define RGBLED_NUM 18 diff --git a/keyboards/donutcables/budget96/keymaps/donut/config.h b/keyboards/donutcables/budget96/keymaps/donut/config.h new file mode 100644 index 000000000000..da538e7b80ef --- /dev/null +++ b/keyboards/donutcables/budget96/keymaps/donut/config.h @@ -0,0 +1,28 @@ +/* +Copyright 2020 DonutCables + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +// place overrides here + +#undef RGBLIGHT_ANIMATIONS +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE + +#define UNICODE_KEY_WINC KC_RGUI diff --git a/keyboards/donutcables/budget96/keymaps/donut/keymap.c b/keyboards/donutcables/budget96/keymaps/donut/keymap.c new file mode 100644 index 000000000000..53e77437ff3f --- /dev/null +++ b/keyboards/donutcables/budget96/keymaps/donut/keymap.c @@ -0,0 +1,171 @@ +/* +Copyright 2020 DonutCables + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +enum layer_names { + _BASE, + _B, + _FN1, + _FN2, +}; + +enum custom_keycodes { + img = SAFE_RANGE, + xkcd, + CD, + AES, + /* Unicode strings maps */ + ALT0, + ALT1, + ALT2, + ALT3, + ALT4, + ALT5, + ALT6, + ALT7, + /* Discord emotes maps */ + B, + X, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT_96_ansi( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, KC_INS, KC_END, KC_MPRV, KC_MPLY, KC_MNXT, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_PSCR, KC_PSLS, KC_PAST, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, + MO(3), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, + KC_LCTL, MO(2), KC_RALT, KC_SPC, KC_CALC, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT), + + /* (1) Bmode layer */ + [_B] = LAYOUT_96_ansi( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, B, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + /* (2) Fn 1 */ + [_FN1] = LAYOUT_96_ansi( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, TG(1), KC_PGUP, KC_VOLD, KC_MUTE, KC_VOLU, + ALT0, KC_TRNS, KC_TRNS, ALT1, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ALT2, KC_TRNS, KC_TRNS, KC_NLCK, KC_TRNS, KC_TRNS, + KC_TRNS, CD, KC_TRNS, KC_TRNS, KC_TRNS, ALT3, KC_TRNS, KC_TRNS, KC_TRNS, ALT4, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, AES, xkcd, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_CLCK, KC_TRNS, X, KC_TRNS, img, B, KC_TRNS, ALT7, ALT5, ALT6, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_LALT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + /* (3) Fn 2 */ + [_FN2] = LAYOUT_96_ansi( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, UC_M_WC, EEP_RST, RESET, + VLK_TOG, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_TRNS, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO), + +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case xkcd: + if (record->event.pressed) { + SEND_STRING("https://xkcd.com/927/"); + } + return true; + case CD: + if (record->event.pressed) { + SEND_STRING("cd d:/keyboard_stuff/gits/qmk_firmware"); + } + return true; + case AES: + if (record->event.pressed) { + SEND_STRING("***A E S T H E T I C S***"); + } + return true; + case img: + if (record->event.pressed) { + SEND_STRING("[url=" SS_LCTL("v") "][img]" SS_LCTL("v") "[/img][/url]"); + } + return true; + case ALT0: + if (record->event.pressed) { + send_unicode_string("≈"); + } + return true; + case ALT1: + if (record->event.pressed) { + send_unicode_string("π"); + } + return true; + case ALT2: + if (record->event.pressed) { + send_unicode_string("±"); + } + return true; + case ALT3: + if (record->event.pressed) { + send_unicode_string("™"); + } + return true; + case ALT4: + if (record->event.pressed) { + send_unicode_string("Ω"); + } + return true; + case ALT5: + if (record->event.pressed) { + send_unicode_string("≤"); + } + return true; + case ALT6: + if (record->event.pressed) { + send_unicode_string("≥"); + } + return true; + case ALT7: + if (record->event.pressed) { + send_unicode_string("ゴ"); + } + return true; + case B: + if (record->event.pressed) { + SEND_STRING(":b:"); + } + return true; + case X: + if (record->event.pressed) { + SEND_STRING(":x:"); + } + return true; + case KC_A ... KC_Z: + case KC_1 ... KC_0: + if (layer_state_is(1)) { + if (record->event.pressed) { + register_code(KC_F13); + tap_code(keycode); + unregister_code(KC_F13); + } + } else { + return true; + } + return false; + } + return true; +} diff --git a/keyboards/donutcables/budget96/keymaps/donut/readme.md b/keyboards/donutcables/budget96/keymaps/donut/readme.md new file mode 100644 index 000000000000..3e1ca1361ac4 --- /dev/null +++ b/keyboards/donutcables/budget96/keymaps/donut/readme.md @@ -0,0 +1,3 @@ +# My personal keymap for Budget96 + +My daily map for the Budget96. Includes unicode and masked characters for AHK pickup. \ No newline at end of file diff --git a/keyboards/donutcables/budget96/keymaps/donut/rules.mk b/keyboards/donutcables/budget96/keymaps/donut/rules.mk new file mode 100644 index 000000000000..7d48394b23d3 --- /dev/null +++ b/keyboards/donutcables/budget96/keymaps/donut/rules.mk @@ -0,0 +1,7 @@ +VELOCIKEY_ENABLE = yes +UNICODE_ENABLE = yes +BACKLIGHT_ENABLE = no +MOUSEKEY_ENABLE = no +COMMAND_ENABLE = no +SPACE_CADET_ENABLE = no +GRAVE_ESC_ENABLE = no diff --git a/keyboards/donutcables/budget96/readme.md b/keyboards/donutcables/budget96/readme.md index 11c49b983403..9cdb3a01bf68 100644 --- a/keyboards/donutcables/budget96/readme.md +++ b/keyboards/donutcables/budget96/readme.md @@ -1,8 +1,8 @@ -# budget96 +# Budget96 -96 key atmega32a keyboard. +A budget-oriented 96 key atmega32a keyboard. Runs ps2avrgb by default. -* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) +* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin), [DonutCables](https://github.com/DonutCables) * Hardware Supported: Budget96 PCB * Hardware Availability: [DonutCables](https://donutcables.com/) diff --git a/keyboards/dz60/keymaps/coppertop/keymap.c b/keyboards/dz60/keymaps/coppertop/keymap.c new file mode 100644 index 000000000000..8586f920f9d8 --- /dev/null +++ b/keyboards/dz60/keymaps/coppertop/keymap.c @@ -0,0 +1,95 @@ + /* Copyright 2020 Philip Chan + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +//Layers +enum layer_names { + _QWERTY, + _FN, + _MEDIA, +}; + +//Custom Keymap Definitions +#define KC_CAD LALT(LCTL(KC_DEL)) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty Base layer + * ,-----------------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | BSpc| Del | + * |-----------------------------------------------------------------------------------------+ + * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | + * |-----------------------------------------------------------------------------------------+ + * | `/_Media| A | S | D | F | G | H | J | K | L | ; | ' | Enter | + * |-----------------------------------------------------------------------------------------+ + * | Shift | Z | X | C | V | B | N | M | , | . | / |Home | Up |End | + * |-----------------------------------------------------------------------------------------+ + * | LCtrl | LGui | LAlt | Space | Fn | Space | F7 | F10 |Left |Down |Right| + * `----------------------------------------------------------------------------------------' + */ + + [_QWERTY] = LAYOUT_directional( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + LT(_MEDIA,KC_GRV), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_HOME, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN), KC_SPC, KC_F7, KC_F10, KC_LEFT, KC_DOWN, KC_RGHT + ), + +/* F-Key/Lighting/whatever layer + * ,-----------------------------------------------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F0 | F11 | F12 | | Ins | + * |-----------------------------------------------------------------------------------------+ + * | |R_Tog|R_HUI|R_SAI|R_VAI| | | | | | | | | KC_CAD | + * |-----------------------------------------------------------------------------------------+ + * | Caps | |R_HUD|R_SAD| | | | | | | SLCK|PAUSE| Print Screen| + * |-----------------------------------------------------------------------------------------+ + * | |R_M_P|R_M_B|R_M_R|R_M_SW|R_M_S|R_M_K|R_M_X|R_M_G| | |PgUp |BLUP |PgDn | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | | | |BLTog|BLDN |BLInc| + * `----------------------------------------------------------------------------------------' + */ + + [_FN] = LAYOUT_directional( + XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, KC_INS, + XXXXXXX, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_CAD, + KC_CAPS, XXXXXXX, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SLCK, KC_PAUS, KC_PSCR, + _______, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, XXXXXXX, XXXXXXX, KC_PGUP, BL_INC, KC_PGDN, + _______, _______, _______, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, BL_TOGG, BL_DEC, BL_STEP + ), + +/* SFX/Multimedia/Numpad layer + * ,-----------------------------------------------------------------------------------------. + * | | | | | | | | | / | * | - | = | |Trns |Trns | + * |-----------------------------------------------------------------------------------------+ + * | | | Prev | Play| Next| | | 7 | 8 | 9 | + | | | RESET | + * |-----------------------------------------------------------------------------------------+ + * | | |Mute | VUp | VDn | | | 4 | 5 | 6 | + | | Trns | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | | | 1 | 2 | 3 |NumEN| | | | + * |-----------------------------------------------------------------------------------------+ + * | Trns | Trns | Trns | Trns | | 0 | . | | | | | + * `----------------------------------------------------------------------------------------' + */ + + [_MEDIA] = LAYOUT_directional( + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PSLS, KC_PAST, KC_PMNS, KC_PEQL, XXXXXXX, _______, _______, + XXXXXXX, XXXXXXX, KC_MPRV, KC_MPLY, KC_MNXT, XXXXXXX, XXXXXXX, KC_P7, KC_P8, KC_P9, KC_PPLS, XXXXXXX, XXXXXXX, RESET, + _______, XXXXXXX, KC_MUTE, KC_VOLD, KC_VOLU, XXXXXXX, XXXXXXX, KC_P4, KC_P5, KC_P6, KC_PPLS, XXXXXXX, _______, + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_P1, KC_P2, KC_P3, KC_PENT, XXXXXXX, XXXXXXX, XXXXXXX, + _______, _______, _______, _______, _______, KC_P0, KC_PDOT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX + ) +}; diff --git a/keyboards/dz60/keymaps/coppertop/rules.mk b/keyboards/dz60/keymaps/coppertop/rules.mk new file mode 100644 index 000000000000..27905483738a --- /dev/null +++ b/keyboards/dz60/keymaps/coppertop/rules.mk @@ -0,0 +1 @@ +BOOTMAGIC_ENABLE = no diff --git a/keyboards/dz60/keymaps/mrsendyyk/keymap.c b/keyboards/dz60/keymaps/mrsendyyk/keymap.c index 58e10490da88..80d03922b9a7 100644 --- a/keyboards/dz60/keymaps/mrsendyyk/keymap.c +++ b/keyboards/dz60/keymaps/mrsendyyk/keymap.c @@ -1,81 +1,98 @@ -/* - * Based on Sendy YK's 60% ANSI Arrow Layout and Keymap - * https://github.com/qmk/qmk_firmware/blob/master/layouts/default/60_ansi_arrow/info.json - * https://github.com/qmk/qmk_firmware/blob/master/layouts/community/60_ansi_arrow/mrsendyyk/keymap.c - * - * https://github.com/mrsendyyk +/* Copyright (C) 2020 Sendy YK (https://mr.sendyyk.com). + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ - + #include QMK_KEYBOARD_H +enum layer_names { + _BASE, // Default Layer + _FN, // Fn Layer 1 + _SETTINGS // Fn Layer 2 +}; + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Default Layer [0] */ - [0] = LAYOUT_60_ansi_arrow(KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, LT(2, KC_RALT), LT(1, KC_RCTL), KC_LEFT, KC_DOWN, KC_RGHT - ), - /* Fn Layer [1] */ - [1] = LAYOUT_60_ansi_arrow(KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, - KC_BRIU, KC_TRNS, KC_TRNS, KC_END, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_EJCT, - KC_BRID, KC_TRNS, KC_SLCK, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, - KC_VOLU, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_TRNS, KC_NLCK, KC_MAIL, KC_TRNS, KC_TRNS, KC_PAUS, KC_PGUP, KC_TRNS, - KC_VOLD, KC_MRWD, KC_MFFD, KC_MPLY, KC_MSTP, KC_TRNS, KC_MPRV, KC_PGDN, KC_MNXT - ), - /* Fn Layer [2] */ - [2] = LAYOUT_60_ansi_arrow(KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_TOGG, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ) + // Default Layer + [_BASE] = LAYOUT_60_ansi_arrow( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, LT(2, KC_RALT), LT(1, KC_RCTL), KC_LEFT, KC_DOWN, KC_RGHT + ), + // Fn Layer 1 + [_FN] = LAYOUT_60_ansi_arrow( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_BRIU, KC_TRNS, KC_TRNS, KC_END, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_EJCT, + KC_BRID, KC_TRNS, KC_SLCK, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, + KC_VOLU, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_TRNS, KC_NLCK, KC_MAIL, KC_TRNS, KC_TRNS, KC_PAUS, KC_PGUP, KC_TRNS, + KC_VOLD, KC_MRWD, KC_MFFD, KC_MPLY, KC_MSTP, KC_TRNS, KC_MPRV, KC_PGDN, KC_MNXT + ), + // Fn Layer 2 + [_SETTINGS] = LAYOUT_60_ansi_arrow( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_TOGG, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) }; void keyboard_post_init_user(void) { - rgblight_enable_noeeprom(); - rgblight_sethsv_noeeprom(0, 0, 0); + rgblight_enable_noeeprom(); + rgblight_sethsv_noeeprom(0, 0, 0); } -/* RGB Lighting/LED/Underglow as Caps Lock, Num Lock, Scroll Lock, and Layer Indicator */ - void update_led(void) { - /* Num Lock Indicator */ - if (host_keyboard_led_state().num_lock) { - rgblight_setrgb(225, 8, 0); - } - /* Scroll Lock Indicator */ - if (host_keyboard_led_state().scroll_lock) { - rgblight_setrgb(241, 190, 72); - } - } +// RGB Lighting/LED/Underglow as Caps Lock, Num Lock, Scroll Lock, and Layer Indicator +void update_led(void) { + // Num Lock Indicator + if (host_keyboard_led_state().num_lock) { + rgblight_setrgb(225, 8, 0); + } + // Scroll Lock Indicator + if (host_keyboard_led_state().scroll_lock) { + rgblight_setrgb(255, 110, 0); + } +} - void led_set_user(uint8_t usb_led) { - /* Caps Lock Indicator */ - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { - writePinLow(B2); - rgblight_setrgb(100, 255, 100); +void led_set_user(uint8_t usb_led) { + // Caps Lock Indicator + if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { + writePinLow(B2); + rgblight_setrgb(100, 255, 100); + } + // Layer Indicator + else { + switch (get_highest_layer(layer_state)) { + // Fn Layer 1 Indicator + case _FN: + rgblight_setrgb(100, 255, 100); + break; + // Fn Layer 2 Indicator + case _SETTINGS: + rgblight_setrgb(100, 255, 100); + break; + // Default Layer Indicator + case _BASE: + rgblight_setrgb(0, 0, 0); + break; } - /* Layer Indicator */ - else { - switch (get_highest_layer(layer_state)) { - /* Fn Layer [1] Indicator */ - case 1: - rgblight_setrgb(255, 110, 0); - break; - /* Fn Layer [2] Indicator */ - case 2: - rgblight_setrgb(255, 110, 0); - break; - /* Default Layer [0] Indicator */ - default: - rgblight_setrgb(0, 0, 0); - break; - } - update_led(); - } - } + update_led(); + } +} layer_state_t layer_state_set_user(layer_state_t state) { - update_led(); - return state; + update_led(); + return state; } diff --git a/keyboards/dz60/keymaps/mrsendyyk/readme.md b/keyboards/dz60/keymaps/mrsendyyk/readme.md index ae5ad2228859..838630221852 100644 --- a/keyboards/dz60/keymaps/mrsendyyk/readme.md +++ b/keyboards/dz60/keymaps/mrsendyyk/readme.md @@ -1,79 +1,79 @@ # Sendy YK's 60% ANSI Arrow Layout and Keymap -This is Sendy YK's [60% ANSI Arrow Layout](https://github.com/qmk/qmk_firmware/blob/master/layouts/default/60_ansi_arrow/info.json) and [Keymap (with RGB Lighting/LED/Underglow as Caps Lock, Num Lock, Scroll Lock, and Layer Indicator)](https://github.com/qmk/qmk_firmware/blob/master/layouts/community/60_ansi_arrow/mrsendyyk/keymap.c). +[https://mr.sendyyk.com](https://mr.sendyyk.com) ## 60% ANSI Arrow Layout -![LAYOUT_60_ansi_arrow](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/kbdfans_tofu_60_keyboard/assets/dz60_layout_60_ansi_arrow.png) +![LAYOUT_60_ansi_arrow](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/dz60/assets/layout-60-ansi-arrow.png) ## Keymap -### Default Layer [0] +### Default Layer -![Default Layer [0]](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/kbdfans_tofu_60_keyboard/assets/dz60_mrsendyyk_0.png) +![_BASE](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/dz60/assets/layout-60-ansi-arrow-keymap---layer-0.png) -### Fn Layer [1] +### Fn Layer 1 Press and hold *right* **Ctrl** key. -![Fn Layer [1]](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/kbdfans_tofu_60_keyboard/assets/dz60_mrsendyyk_1.png) +![_FN](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/dz60/assets/layout-60-ansi-arrow-keymap---layer-1.png) -### Fn Layer [2] +### Fn Layer 2 Press and hold *right* **Alt** key. -![Fn Layer [2]](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/kbdfans_tofu_60_keyboard/assets/dz60_mrsendyyk_2.png) +![_SETTINGS](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/dz60/assets/layout-60-ansi-arrow-keymap---layer-2.png) ### RGB Lighting/LED/Underglow as Caps Lock, Num Lock, Scroll Lock, and Layer Indicator #### Caps Lock Indicator ```c -/* Caps Lock Indicator */ - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { - writePinLow(B2); - rgblight_setrgb(100, 255, 100); - } + // Caps Lock Indicator + if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { + writePinLow(B2); + rgblight_setrgb(100, 255, 100); + } ``` #### Num Lock Indicator ```c -/* Num Lock Indicator */ - if (host_keyboard_led_state().num_lock) { - rgblight_setrgb(225, 8, 0); - } + // Num Lock Indicator + if (host_keyboard_led_state().num_lock) { + rgblight_setrgb(225, 8, 0); + } ``` #### Scroll Lock Indicator ```c -/* Scroll Lock Indicator */ - if (host_keyboard_led_state().scroll_lock) { - rgblight_setrgb(241, 190, 72); - } + // Scroll Lock Indicator + if (host_keyboard_led_state().scroll_lock) { + rgblight_setrgb(255, 110, 0); + } ``` #### Layer Indicator ```c -/* Layer Indicator */ - else { - switch (get_highest_layer(layer_state)) { - /* Fn Layer [1] Indicator */ - case 1: - rgblight_setrgb(255, 110, 0); - break; - /* Fn Layer [2] Indicator */ - case 2: - rgblight_setrgb(255, 110, 0); - break; - /* Default Layer [0] Indicator */ - default: - rgblight_setrgb(0, 0, 0); - break; - } - update_led(); - } + // Layer Indicator + else { + switch (get_highest_layer(layer_state)) { + // Fn Layer 1 Indicator + case _FN: + rgblight_setrgb(100, 255, 100); + break; + // Fn Layer 2 Indicator + case _SETTINGS: + rgblight_setrgb(100, 255, 100); + break; + // Default Layer Indicator + case _BASE: + rgblight_setrgb(0, 0, 0); + break; + } + update_led(); + } ``` ## Build The Firmware diff --git a/keyboards/dz60/keymaps/spotpuff/keymap.c b/keyboards/dz60/keymaps/spotpuff/keymap.c new file mode 100644 index 000000000000..edbe635e39a4 --- /dev/null +++ b/keyboards/dz60/keymaps/spotpuff/keymap.c @@ -0,0 +1,95 @@ + /* Copyright 2020 Philip Chan + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +//Layers +enum layer_names { + _QWERTY, + _FN, + _MEDIA, +}; + +//Custom Keymap Definitions +#define KC_CAD LALT(LCTL(KC_DEL)) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty Base layer + * ,-----------------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | BSpc| Del | + * |-----------------------------------------------------------------------------------------+ + * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | + * |-----------------------------------------------------------------------------------------+ + * | `/_Media| A | S | D | F | G | H | J | K | L | ; | ' | Enter | + * |-----------------------------------------------------------------------------------------+ + * | Shift | Z | X | C | V | B | N | M | , | . | / |PgUp | Up |PgDn | + * |-----------------------------------------------------------------------------------------+ + * | LCtrl | LGui | LAlt | Space | Fn | Space |Home | End |Left |Down |Right| + * `----------------------------------------------------------------------------------------' + */ + + [_QWERTY] = LAYOUT_directional( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + LT(_MEDIA,KC_GRV), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_PGUP, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN), KC_SPC, KC_HOME, KC_END, KC_LEFT, KC_DOWN, KC_RGHT + ), + +/* F-Key/Lighting/whatever layer + * ,-----------------------------------------------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F0 | F11 | F12 | | Ins | + * |-----------------------------------------------------------------------------------------+ + * | |R_Tog|R_HUI|R_SAI|R_VAI| | | | | | | | | KC_CAD | + * |-----------------------------------------------------------------------------------------+ + * | Caps | |R_HUD|R_SAD| | | | | | | SLCK|PAUSE| Print Screen| + * |-----------------------------------------------------------------------------------------+ + * | Trns |R_M_P|R_M_B|R_M_R|R_M_SW|R_M_S|R_M_K|R_M_X|R_M_G| | | |BLUP | | + * |-----------------------------------------------------------------------------------------+ + * | Trns | Trns | Trns | | Trns | | | |BLTog|BLDN |BLInc| + * `----------------------------------------------------------------------------------------' + */ + + [_FN] = LAYOUT_directional( + XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, KC_INS, + XXXXXXX, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_CAD, + KC_CAPS, XXXXXXX, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SLCK, KC_PAUS, KC_PSCR, + _______, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, XXXXXXX, XXXXXXX, XXXXXXX, BL_INC, XXXXXXX, + _______, _______, _______, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, BL_TOGG, BL_DEC, BL_STEP + ), + +/* SFX/Multimedia/Numpad layer + * ,-----------------------------------------------------------------------------------------. + * | | | | | | |NumLk| | / | * | - | = | |Trns |Trns | + * |-----------------------------------------------------------------------------------------+ + * | | | Prev | Play| Next| | | 7 | 8 | 9 | + | | | RESET | + * |-----------------------------------------------------------------------------------------+ + * | Trns | |Mute | VUp | VDn | | | 4 | 5 | 6 | + | | Trns | + * |-----------------------------------------------------------------------------------------+ + * | Trns | | | | | | | 1 | 2 | 3 |NumEN| | | | + * |-----------------------------------------------------------------------------------------+ + * | Trns | Trns | Trns | Trns | Trns | 0 | . | | | | | + * `----------------------------------------------------------------------------------------' + */ + + [_MEDIA] = LAYOUT_directional( + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_NLCK, XXXXXXX, KC_PSLS, KC_PAST, KC_PMNS, KC_PEQL, XXXXXXX, _______, _______, + XXXXXXX, XXXXXXX, KC_MPRV, KC_MPLY, KC_MNXT, XXXXXXX, XXXXXXX, KC_P7, KC_P8, KC_P9, KC_PPLS, XXXXXXX, XXXXXXX, RESET, + _______, XXXXXXX, KC_MUTE, KC_VOLD, KC_VOLU, XXXXXXX, XXXXXXX, KC_P4, KC_P5, KC_P6, KC_PPLS, XXXXXXX, _______, + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_P1, KC_P2, KC_P3, KC_PENT, XXXXXXX, XXXXXXX, XXXXXXX, + _______, _______, _______, _______, _______, KC_P0, KC_PDOT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX + ) +}; diff --git a/keyboards/dz60/keymaps/spotpuff/rules.mk b/keyboards/dz60/keymaps/spotpuff/rules.mk new file mode 100644 index 000000000000..27905483738a --- /dev/null +++ b/keyboards/dz60/keymaps/spotpuff/rules.mk @@ -0,0 +1 @@ +BOOTMAGIC_ENABLE = no diff --git a/keyboards/dztech/dz60rgb_ansi/keymaps/badger/keymap.c b/keyboards/dztech/dz60rgb_ansi/keymaps/badger/keymap.c new file mode 100644 index 000000000000..1d2144d7f427 --- /dev/null +++ b/keyboards/dztech/dz60rgb_ansi/keymaps/badger/keymap.c @@ -0,0 +1,60 @@ +/* +Copyright 2020 Dan White + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "badger.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY_MAC] = LAYOUT_60_ansi(\ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + MOVE_MAC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, ADJUST, KC_RGUI, KC_RALT, MAC_POP), + + [_MOVE_MAC] = LAYOUT_60_ansi(\ + MAC_FRC, MM_LEFT, MM_RGHT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_0, IJ_TOP, IJ_BOTT, KC_DEL, \ + KC_BACK, IJ_STEP, IJ_INTO, IJ_OUT, IJ_RUN, IJ_STOP, _______, WD_BACK, KC_HOME, KC_END, WD_FRWD, IJ_BACK, IJ_FWD, KC_NEXT, \ + _______, MM_LH, MM_MAX, MM_RH, IJ_FIND, IJ_IMPS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, CM_RIGHT, CM_DOWN, _______, \ + _______, MM_UH, MM_BH, MAC_CPY, MAC_PST, IJ_IMPH, _______, IJ_REN, IJ_IMPL, IJ_DECL, IJ_USAG, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______), + + [_QWERTY_LINUX] = LAYOUT_60_ansi(\ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + MOVE, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, ADJUST, KC_LALT, KC_RGUI, KC_RCTL), + + [_MOVE_LINUX] = LAYOUT_60_ansi(\ + KC_GRV, VD_1, VD_2, VD_3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_BACK, WM_VD1, WM_UH, WM_VD2, RESET, KC_MSTP, KC_MPLY, KC_PGUP, KC_HOME, KC_END, KC_PGDN, _______, _______, KC_NEXT, \ + _______, WM_LH, WM_MAX, WM_RH, WD_FRWD, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, CS_RIGHT, CS_DOWN, _______, \ + _______, WM_VD3, WM_BH, OS_COPY, OS_PAST, WD_BACK, KC_MNXT, KC_MUTE, KC_WBAK, KC_WFWD, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______), + + [_ADJUST] = LAYOUT_60_ansi(\ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + _______, _______, _______, _______, KC_WREF, KC_MSTP, KC_MPLY, KC_PGUP, _______, _______, KC_PGDN, KC_VOLD, KC_VOLU, KC_INS, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, DF_1, DF_2, KC_CAPS, _______, KC_MPRV, KC_MNXT, KC_MUTE, KC_WBAK, KC_WFWD, KC_WSCH, _______, \ + _______, _______, _______, _______, _______, _______, _______, MO(_CONFIG)), + + [_CONFIG] = LAYOUT_60_ansi(\ + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + _______, NK_ON, NK_OFF, EEP_RST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, \ + _______, GE_SWAP, GE_NORM, DEBUG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_SPI, RGB_M_B, _______, _______, RGB_TOG, _______, \ + _______, LAG_SWP, LAG_NRM, _______, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_SPD, RGB_M_K, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______) +}; + diff --git a/keyboards/dztech/dz65rgb/keymaps/pagondel/keymap.c b/keyboards/dztech/dz65rgb/keymaps/pagondel/keymap.c new file mode 100644 index 000000000000..277323987c8b --- /dev/null +++ b/keyboards/dztech/dz65rgb/keymaps/pagondel/keymap.c @@ -0,0 +1,65 @@ +/* Copyright 2020 pagondel + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum layers { + _BL, + _FL, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,-----------------------------------------------------------------------------. + * |Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = |Backsp |~ ` | + * |-----------------------------------------------------------------------------| + * |Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ |Del | + * |-----------------------------------------------------------------------------| + * |FN | A | S | D | F | G | H | J | K | L | ; | ' |Return |PgUp| + * |-----------------------------------------------------------------------------| + * |Shift | Z | X | C | V | B | N | M | , | . | / |Shift | Up |PgDn| + * |-----------------------------------------------------------------------------| + * |Ctrl |Win |Alt | Space |Alt | FN |Ctrl |Lef |Dow |Rig | + * `-----------------------------------------------------------------------------' + */ + [_BL] = LAYOUT_65_ansi( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + /* Keymap _FL: Function Layer + * ,-----------------------------------------------------------------------------. + * |Esc | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 |F10 |F11 |F12 |DEL |PNTS| + * |-----------------------------------------------------------------------------| + * | |RgbT|RgbM|Hue+|Hue-|Sat+|Sat-|BR+ |BR- | | |SLCK|Paus|RST | | + * |-----------------------------------------------------------------------------| + * | |Eff+|Eff-| | | | | | | | | |EEP RST | | + * |-----------------------------------------------------------------------------| + * |Shift | | | | | |NK T|Mute|Vol-|Vol+| | |PgUp| | + * |-----------------------------------------------------------------------------| + * | | | | Play | | | |Home|PgDn|End | + * `-----------------------------------------------------------------------------' + */ + [_FL] = LAYOUT_65_ansi( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_PSCR, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, KC_SLCK, KC_PAUS, RESET, _______, + _______, RGB_SPI, RGB_SPD, _______, _______, _______, _______, _______, _______, _______, _______, _______, EEP_RST, _______, + KC_LSFT, _______, _______, _______, _______, _______, NK_TOGG, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, KC_PGUP, _______, + _______, _______, _______, KC_MPLY, _______, _______, _______, KC_HOME, KC_VOLD, KC_END + ) +}; diff --git a/keyboards/dztech/dz65rgb/keymaps/pagondel/readme.md b/keyboards/dztech/dz65rgb/keymaps/pagondel/readme.md new file mode 100644 index 000000000000..8f55ce428a6a --- /dev/null +++ b/keyboards/dztech/dz65rgb/keymaps/pagondel/readme.md @@ -0,0 +1,35 @@ +# pagondel's DZ65RGB v2 layout + +``` + Keymap Default Layer + ,-----------------------------------------------------------------------------. + |Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = |Backsp |~ ` | + |-----------------------------------------------------------------------------| + |Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ |Del | + |-----------------------------------------------------------------------------| + |FN | A | S | D | F | G | H | J | K | L | ; | ' |Return |PgUp| + |-----------------------------------------------------------------------------| + |Shift | Z | X | C | V | B | N | M | , | . | / |Shift | Up |PgDn| + |-----------------------------------------------------------------------------| + |Ctrl |Win |Alt | Space |Alt | FN |Ctrl |Lef |Dow |Rig | + `-----------------------------------------------------------------------------' +``` + +``` + Keymap Function Layer + ,-----------------------------------------------------------------------------. + |Esc | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 |F10 |F11 |F12 |DEL |PNTS| + |-----------------------------------------------------------------------------| + | |RgbT|RgbM|Hue+|Hue-|Sat+|Sat-|BR+ |BR- | | |SLCK|Paus|RST | | + |-----------------------------------------------------------------------------| + | |Eff+|Eff-| | | | | | | | | |EEP RST | | + |-----------------------------------------------------------------------------| + |Shift | | | | | |NK T|Mute|Vol-|Vol+| | |PgUp| | + |-----------------------------------------------------------------------------| + | | | | Play | | | |Home|PgDn|End | + `-----------------------------------------------------------------------------' +``` + +### Build layout + +```qmk compile -kb dztech/dz65rgb/v2 -km pagondel``` diff --git a/keyboards/ergodox_ez/keymaps/stamm/config.h b/keyboards/ergodox_ez/keymaps/stamm/config.h new file mode 100644 index 000000000000..e1db3d9002e2 --- /dev/null +++ b/keyboards/ergodox_ez/keymaps/stamm/config.h @@ -0,0 +1,40 @@ +/* Copyright 2020 Rustam Zagirov + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* + Set any config.h overrides for your specific keymap here. + See config.h options at https://docs.qmk.fm/#/config_options?id=the-configh-file +*/ +#pragma once + +#define ORYX_CONFIGURATOR +#define LEADER_TIMEOUT 500 +#define LEADER_PER_KEY_TIMING + +#define TAPPING_TERM 200 +#define TAPPING_TERM_PER_KEY +#define PERMISSIVE_HOLD +/* #define PERMISSIVE_HOLD_PER_KEY */ + +#define IGNORE_MOD_TAP_INTERRUPT +#define IGNORE_MOD_TAP_INTERRUPT_PER_KEY + +#define TAPPING_FORCE_HOLD +#define TAPPING_FORCE_HOLD_PER_KEY + +/* #define RETRO_TAPPING */ +#undef LED_BRIGHTNESS_DEFAULT +#define LED_BRIGHTNESS_DEFAULT (LED_BRIGHTNESS_LO) diff --git a/keyboards/ergodox_ez/keymaps/stamm/keymap.c b/keyboards/ergodox_ez/keymaps/stamm/keymap.c new file mode 100644 index 000000000000..e2d9964ba53d --- /dev/null +++ b/keyboards/ergodox_ez/keymaps/stamm/keymap.c @@ -0,0 +1,308 @@ +/* Copyright 2020 Rustam Zagirov + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H +#include "version.h" + +#define KC_MAC_UNDO LGUI(KC_Z) +#define KC_MAC_CUT LGUI(KC_X) +#define KC_MAC_COPY LGUI(KC_C) +#define KC_MAC_PASTE LGUI(KC_V) +#define KC_PC_UNDO LCTL(KC_Z) +#define KC_PC_CUT LCTL(KC_X) +#define KC_PC_COPY LCTL(KC_C) +#define KC_PC_PASTE LCTL(KC_V) +#define ES_LESS_MAC KC_GRAVE +#define ES_GRTR_MAC LSFT(KC_GRAVE) +#define ES_BSLS_MAC ALGR(KC_6) +#define NO_PIPE_ALT KC_GRAVE +#define NO_BSLS_ALT KC_EQUAL +#define LSA_T(kc) MT(MOD_LSFT | MOD_LALT, kc) + +#define E_NUMBERS LT(_3_NUMBERS,KC_E) +#define R_MOUSE LT(_4_MOUSE,KC_R) +#define O_NUMBERS LT(_3_NUMBERS,KC_O) +#define U_MOUSE LT(_4_MOUSE,KC_U) +#define R_NUMBERS LT(_3_NUMBERS,KC_R) +#define W_MOUSE LT(_4_MOUSE,KC_W) +#define LEFT_NUMBERS LT(_3_NUMBERS, KC_LEFT) +#define RIGHT_MOUSE LT(_4_MOUSE, KC_RIGHT) + +enum custom_keycodes { + RGB_SLD = EZ_SAFE_RANGE, + ALT_TAB, +}; + +bool is_alt_tab_active = false; // ADD this near the begining of keymap.c +uint16_t alt_tab_timer = 0; // we will be using them soon. + +enum layers { + _0_BASE, + _1_BEAKL, + _2_WORKMAN, + _3_NUMBERS, + _4_MOUSE, +}; + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_0_BASE] = LAYOUT_ergodox( + KC_NONUS_BSLASH, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_AUDIO_MUTE, + KC_LEAD, KC_Q, KC_W, E_NUMBERS, R_MOUSE, KC_T, TG(_1_BEAKL), + LCTL(KC_B), LSFT_T(KC_A), LCTL_T(KC_S), LALT_T(KC_D), LGUI_T(KC_F), KC_G, + KC_BSLASH, KC_Z, KC_X, KC_C, KC_V, KC_B, TG(_2_WORKMAN), + ALT_TAB, XXXXXXX, XXXXXXX, LEFT_NUMBERS, RIGHT_MOUSE, + KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP, + XXXXXXX, + KC_ENTER, KC_TAB, KC_ESCAPE, + KC_CAPSLOCK, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_MINUS, + XXXXXXX, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRACKET, + KC_H, RGUI_T(KC_J), RALT_T(KC_K), RCTL_T(KC_L), RSFT_T(KC_SCOLON), KC_QUOTE, + KC_RBRACKET, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLASH, KC_EQUAL, + KC_DOWN, KC_UP, XXXXXXX, XXXXXXX, XXXXXXX, + KC_MEDIA_PLAY_PAUSE, KC_MEDIA_NEXT_TRACK, + XXXXXXX, + KC_ESCAPE, KC_BSPACE, KC_SPACE +), +[_1_BEAKL] = LAYOUT_ergodox( + _______, _______, _______, _______, _______, _______, _______, + _______, _______, KC_H, O_NUMBERS, U_MOUSE, KC_X, _______, + _______, LSFT_T(KC_Y), LCTL_T(KC_I), LALT_T(KC_E), LGUI_T(KC_A), KC_DOT, + _______, KC_J, KC_SLASH, KC_COMMA, KC_K, KC_QUOTE, _______, + _______, _______, _______, _______, _______, + _______, _______, + _______, + _______, _______, _______, + + _______, _______, _______, _______, _______, _______, _______, + _______, KC_G, KC_C, KC_R, KC_F, KC_Z, _______, + KC_D, RGUI_T(KC_S), RALT_T(KC_T), RCTL_T(KC_N), RSFT_T(KC_B), KC_SCOLON, + _______, KC_W, _______, KC_L, KC_P, KC_V, _______, + _______, _______, _______, _______, _______, + _______, _______, + _______, + _______, _______, _______ +), +[_2_WORKMAN] = LAYOUT_ergodox( + _______, _______, _______, _______, _______, _______, _______, + _______, _______, KC_D, R_NUMBERS, W_MOUSE, KC_B, _______, + _______, _______, _______, LALT_T(KC_H), LGUI_T(KC_T), _______, + _______, _______, _______, KC_M, KC_C, KC_V, _______, + _______, _______, _______, _______, _______, + _______, _______, + _______, + _______, _______, _______, + + _______, _______, _______, _______, _______, _______, _______, + _______, KC_J, KC_F, KC_U, KC_P, KC_SCOLON, _______, + KC_Y, RGUI_T(KC_N), RALT_T(KC_E), RCTL_T(KC_O), RSFT_T(KC_I), _______, + _______, KC_K, KC_L, _______, _______, _______, _______, + _______, _______, _______, _______, _______, + _______, _______, + _______, + _______, _______, _______ +), +[_3_NUMBERS] = LAYOUT_ergodox( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + RESET, _______, _______, _______, _______, + _______, _______, + _______, + _______, _______, _______, + + _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + _______, _______, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + _______, KC_4, KC_5, KC_6, KC_PLUS, _______, + _______, _______, KC_1, KC_2, KC_3, KC_BSLASH, _______, + KC_0, KC_KP_DOT, _______, KC_EQUAL, _______, + _______, _______, + _______, + _______, _______, _______ +), +[_4_MOUSE] = LAYOUT_ergodox( + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, + + RGB_HUI, RGB_HUD, + _______, + _______, _______, _______, + + _______, _______, _______, _______, _______, _______, _______, + RGB_MOD, RGB_TOG, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, _______, _______, + RGB_SLD, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, _______, _______, + TOGGLE_LAYER_COLOR, _______, KC_MS_WH_UP, _______, KC_MS_WH_DOWN, _______, _______, + _______, _______, _______, _______, _______, + + RGB_VAD, RGB_VAI, + _______, + _______, _______, +), +}; + + +/* bool suspended = false; */ + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case RGB_SLD: + if (record->event.pressed) { + rgblight_mode(1); + } + return false; + case ALT_TAB: + if (record->event.pressed) { + if (!is_alt_tab_active) { + is_alt_tab_active = true; + register_code(KC_LGUI); + } + alt_tab_timer = timer_read(); + register_code(KC_TAB); + } else { + unregister_code(KC_TAB); + } + break; + } + return true; +} + +layer_state_t layer_state_set_user(layer_state_t state) { + ergodox_led_all_off(); + switch (get_highest_layer(state)) { + case _1_BEAKL: + ergodox_right_led_1_on(); + break; + case _2_WORKMAN: + ergodox_right_led_2_on(); + break; + case _3_NUMBERS: + ergodox_right_led_3_on(); + break; + case _4_MOUSE: + ergodox_right_led_1_on(); + ergodox_right_led_2_on(); + break; + /* case 6: */ + /* ergodox_right_led_2_on(); */ + /* ergodox_right_led_3_on(); */ + /* break; */ + /* case 7: */ + /* ergodox_right_led_1_on(); */ + /* ergodox_right_led_2_on(); */ + /* ergodox_right_led_3_on(); */ + /* break; */ + default: + break; + } + return state; + +}; + + +uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + /* case SFT_T(KC_SPC): */ + /* return TAPPING_TERM + 1250; */ + case LT(_3_NUMBERS, KC_E): + return 200; + case LT(_4_MOUSE, KC_R): + return 200; + /* case LGUI_T(KC_F): */ + /* return 50; */ + default: + return TAPPING_TERM; + } +} +bool get_ignore_mod_tap_interrupt(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case LT(_3_NUMBERS, KC_E): + case LT(_4_MOUSE, KC_R): + case LSFT_T(KC_A): + case LCTL_T(KC_S): + case LALT_T(KC_D): + case LGUI_T(KC_F): + case RGUI_T(KC_J): + case RALT_T(KC_K): + case RCTL_T(KC_L): + case RSFT_T(KC_SCOLON): + case LEFT_NUMBERS: + case RIGHT_MOUSE: + return true; + default: + return false; + } +} + + +bool get_tapping_force_hold(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case LT(_3_NUMBERS, KC_E): + case LT(_4_MOUSE, KC_R): + case LSFT_T(KC_A): + case LCTL_T(KC_S): + case LALT_T(KC_D): + case LGUI_T(KC_F): + case RGUI_T(KC_J): + case RALT_T(KC_K): + case RCTL_T(KC_L): + case RSFT_T(KC_SCOLON): + case LEFT_NUMBERS: + case RIGHT_MOUSE: + return false; + default: + return true; + } +} + + + +LEADER_EXTERNS(); + +void matrix_scan_user(void) { + if (is_alt_tab_active) { + if (timer_elapsed(alt_tab_timer) > 1000) { + unregister_code(KC_LGUI); + is_alt_tab_active = false; + } + } + LEADER_DICTIONARY() { + leading = false; + leader_end(); + + SEQ_ONE_KEY(KC_F) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + SEQ_ONE_KEY(KC_S) { + SEND_STRING ("sudo -i\n"); + } + SEQ_TWO_KEYS(KC_D, KC_D) { + SEND_STRING(SS_LGUI("ac")); + /* SEND_STRING(SS_LGUI("a") SS_LGUI("c")); */ + } + SEQ_THREE_KEYS(KC_D, KC_D, KC_S) { + SEND_STRING("https://start.duckduckgo.com\n"); + } + SEQ_TWO_KEYS(KC_A, KC_S) { + register_code(KC_LGUI); + register_code(KC_S); + unregister_code(KC_S); + unregister_code(KC_LGUI); + } + } +} diff --git a/keyboards/ergodox_ez/keymaps/stamm/readme.md b/keyboards/ergodox_ez/keymaps/stamm/readme.md new file mode 100644 index 000000000000..f2cdc7ea1a8b --- /dev/null +++ b/keyboards/ergodox_ez/keymaps/stamm/readme.md @@ -0,0 +1,117 @@ +# Stamm layouts for ergodox_ez + +5 layers: + +* QUERTY +* BEAKL15 +* WORKMAN +* Numbers +* Mouse + +On home row there are hold dual keys: +- shift, ctrl, alt, cmd — on the fingers on the left hand +- cmd, alt, ctrl, shift — mirrored on the finger on the righ hand + +Top row behaves like shifter numbers row. +Hold E switch to layer with numbers. +Hold R switch to mouse controll layer. + +``` + 0 Base +╭────────┬─────┬─────┬─────┬─────┬─────┬─────╮ ╭─────┬─────┬─────┬─────┬─────┬─────┬────────╮ +│ ` │ ! │ @ │ # │ $ │ % │Mute │ │Capsl│ ^ │ & │ * │ ( │ ) │ - │ +├────────┼─────┼─────┼─────┼─────┼─────┼─────┤ ├─────┼─────┼─────┼─────┼─────┼─────┼────────┤ +│ Lead │ Q │ W │E|LT3│R|LT4│ T │ TG1 │ │ │ Y │ U │ I │ O │ P │ [ │ +├────────┼─────┼─────┼─────┼─────┼─────┤ │ │ ├─────┼─────┼─────┼─────┼─────┼────────┤ +│Ctrl + B│A | ⇧│S | ⌃│D | ⌥│F | ⌘│ G ├─────┤ ├─────┤ H │J | ⌘│K | ⌥│L | ⌃│; | ⇧│ ' │ +├────────┼─────┼─────┼─────┼─────┼─────┤ TG2 │ │ ] ├─────┼─────┼─────┼─────┼─────┼────────┤ +│ \ │ Z │ X │ C │ V │ B │ │ │ │ N │ M │ , │ . │ / │ = │ +╰──┬─────┼─────┼─────┼─────┼─────┼─────┴─────╯ ╰─────┴─────┼─────┼─────┼─────┼─────┼─────┬──╯ + │⎇ + T│ │ │←|LT3│→|LT4│ │ ↓ │ ↑ │ │ │ │ + ╰─────┴─────┴─────┴─────┴─────╯ ╭─────┬─────╮ ╭─────┬─────╮ ╰─────┴─────┴─────┴─────┴─────╯ + │Vol- │Vol+ │ │Play │Next │ + ╭─────┼─────┼─────┤ ├─────┼─────┼─────╮ + │ │ │ │ │ │ │ │ + │Enter│ Tab ├─────┤ ├─────┤Bspac│ ⎵ │ + │ │ │ Esc │ │ Esc │ │ │ + ╰─────┴─────┴─────╯ ╰─────┴─────┴─────╯ + + 1 Beakl +╭────────┬─────┬─────┬─────┬─────┬─────┬─────╮ ╭─────┬─────┬─────┬─────┬─────┬─────┬────────╮ +│ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ +├────────┼─────┼─────┼─────┼─────┼─────┼─────┤ ├─────┼─────┼─────┼─────┼─────┼─────┼────────┤ +│ │ │ H │O|LT3│U|LT4│ X │ │ │ │ G │ C │ R │ F │ Z │ │ +├────────┼─────┼─────┼─────┼─────┼─────┤ │ │ ├─────┼─────┼─────┼─────┼─────┼────────┤ +│ │Y | ⇧│I | ⌃│E | ⌥│A | ⌘│ . ├─────┤ ├─────┤ D │S | ⌘│T | ⌥│N | ⌃│B | ⇧│ ; │ +├────────┼─────┼─────┼─────┼─────┼─────┤ │ │ ├─────┼─────┼─────┼─────┼─────┼────────┤ +│ │ J │ / │ , │ K │ ' │ │ │ │ W │ │ L │ P │ V │ │ +╰──┬─────┼─────┼─────┼─────┼─────┼─────┴─────╯ ╰─────┴─────┼─────┼─────┼─────┼─────┼─────┬──╯ + │ │ │ │ │ │ │ │ │ │ │ │ + ╰─────┴─────┴─────┴─────┴─────╯ ╭─────┬─────╮ ╭─────┬─────╮ ╰─────┴─────┴─────┴─────┴─────╯ + │ │ │ │ │ │ + ╭─────┼─────┼─────┤ ├─────┼─────┼─────╮ + │ │ │ │ │ │ │ │ + │ │ ├─────┤ ├─────┤ │ │ + │ │ │ │ │ │ │ │ + ╰─────┴─────┴─────╯ ╰─────┴─────┴─────╯ + + 2 Workman +╭────────┬─────┬─────┬─────┬─────┬─────┬─────╮ ╭─────┬─────┬─────┬─────┬─────┬─────┬────────╮ +│ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ +├────────┼─────┼─────┼─────┼─────┼─────┼─────┤ ├─────┼─────┼─────┼─────┼─────┼─────┼────────┤ +│ │ │ D │R|LT3│W|LT4│ B │ │ │ │ J │ F │ U │ P │ ; │ │ +├────────┼─────┼─────┼─────┼─────┼─────┤ │ │ ├─────┼─────┼─────┼─────┼─────┼────────┤ +│ │ │ │H | ⌥│T | ⌘│ ├─────┤ ├─────┤ Y │N | ⌘│E | ⌥│O | ⌃│I | ⇧│ │ +├────────┼─────┼─────┼─────┼─────┼─────┤ │ │ ├─────┼─────┼─────┼─────┼─────┼────────┤ +│ │ │ │ M │ C │ V │ │ │ │ K │ L │ │ │ │ │ +╰──┬─────┼─────┼─────┼─────┼─────┼─────┴─────╯ ╰─────┴─────┼─────┼─────┼─────┼─────┼─────┬──╯ + │ │ │ │ │ │ │ │ │ │ │ │ + ╰─────┴─────┴─────┴─────┴─────╯ ╭─────┬─────╮ ╭─────┬─────╮ ╰─────┴─────┴─────┴─────┴─────╯ + │ │ │ │ │ │ + ╭─────┼─────┼─────┤ ├─────┼─────┼─────╮ + │ │ │ │ │ │ │ │ + │ │ ├─────┤ ├─────┤ │ │ + │ │ │ │ │ │ │ │ + ╰─────┴─────┴─────╯ ╰─────┴─────┴─────╯ + + 3 Numbers +╭────────┬─────┬─────┬─────┬─────┬─────┬─────╮ ╭─────┬─────┬─────┬─────┬─────┬─────┬────────╮ +│ │ F1 │ F2 │ F3 │ F4 │ F5 │ │ │ │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ +├────────┼─────┼─────┼─────┼─────┼─────┼─────┤ ├─────┼─────┼─────┼─────┼─────┼─────┼────────┤ +│ │ │ │ │ │ │ │ │ │ │ 7 │ 8 │ 9 │ * │ F12 │ +├────────┼─────┼─────┼─────┼─────┼─────┤ │ │ ├─────┼─────┼─────┼─────┼─────┼────────┤ +│ │ │ │ │ │ ├─────┤ ├─────┤ │ 4 │ 5 │ 6 │ + │ │ +├────────┼─────┼─────┼─────┼─────┼─────┤ │ │ ├─────┼─────┼─────┼─────┼─────┼────────┤ +│ │ │ │ │ │ │ │ │ │ │ 1 │ 2 │ 3 │ \ │ │ +╰──┬─────┼─────┼─────┼─────┼─────┼─────┴─────╯ ╰─────┴─────┼─────┼─────┼─────┼─────┼─────┬──╯ + │Reset│ │ │ │ │ │ 0 │ . │ │ = │ │ + ╰─────┴─────┴─────┴─────┴─────╯ ╭─────┬─────╮ ╭─────┬─────╮ ╰─────┴─────┴─────┴─────┴─────╯ + │ │ │ │ │ │ + ╭─────┼─────┼─────┤ ├─────┼─────┼─────╮ + │ │ │ │ │ │ │ │ + │ │ ├─────┤ ├─────┤ │ │ + │ │ │ │ │ │ │ │ + ╰─────┴─────┴─────╯ ╰─────┴─────┴─────╯ + + 4 Mouse +╭────────┬─────┬─────┬─────┬─────┬─────┬─────╮ ╭─────┬─────┬─────┬─────┬─────┬─────┬────────╮ +│ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ +├────────┼─────┼─────┼─────┼─────┼─────┼─────┤ ├─────┼─────┼─────┼─────┼─────┼─────┼────────┤ +│ │ │ │ │ │ │ │ │RgbMo│RgbTo│MsBtn│MsUp │MsBtn│ │ │ +├────────┼─────┼─────┼─────┼─────┼─────┤ │ │ ├─────┼─────┼─────┼─────┼─────┼────────┤ +│ │ │ │ │ │ ├─────┤ ├─────┤RgbSl│MsLef│MsDow│MsRig│ │ │ +├────────┼─────┼─────┼─────┼─────┼─────┤ │ │Toggl├─────┼─────┼─────┼─────┼─────┼────────┤ +│ │ │ │ │ │ │ │ │ │ │MsWhU│ │MsWhD│ │ │ +╰──┬─────┼─────┼─────┼─────┼─────┼─────┴─────╯ ╰─────┴─────┼─────┼─────┼─────┼─────┼─────┬──╯ + │ │ │ │ │ │ │ │ │ │ │ │ + ╰─────┴─────┴─────┴─────┴─────╯ ╭─────┬─────╮ ╭─────┬─────╮ ╰─────┴─────┴─────┴─────┴─────╯ + │RgbHu│RgbHu│ │RgbVa│RgbVa│ + ╭─────┼─────┼─────┤ ├─────┼─────┼─────╮ + │ │ │ │ │ │ │ │ + │ │ ├─────┤ ├─────┤ │ 75 │ + │ │ │ │ │ │ │ │ + ╰─────┴─────┴─────╯ ╰─────┴─────┴─────╯ + +``` + +Copyright © 2020 Rustam Zagirov. Released under [GPL-2.0](/LICENSE). diff --git a/keyboards/ergodox_ez/keymaps/stamm/rules.mk b/keyboards/ergodox_ez/keymaps/stamm/rules.mk new file mode 100644 index 000000000000..619224bef45b --- /dev/null +++ b/keyboards/ergodox_ez/keymaps/stamm/rules.mk @@ -0,0 +1,8 @@ +# Set any rules.mk overrides for your specific keymap here. +# See rules at https://docs.qmk.fm/#/config_options?id=the-rulesmk-file +LTO_ENABLE = yes +COMMAND_ENABLE = no +LEADER_ENABLE = yes +RGBLIGHT_ENABLE = yes + +TAP_DANCE_ENABLE = no diff --git a/keyboards/ergodox_infinity/ergodox_infinity.c b/keyboards/ergodox_infinity/ergodox_infinity.c index 9fda7991f13f..c69c1eb36f4f 100644 --- a/keyboards/ergodox_infinity/ergodox_infinity.c +++ b/keyboards/ergodox_infinity/ergodox_infinity.c @@ -6,6 +6,17 @@ #include "lcd_backlight.h" #endif +#ifdef WPM_ENABLE +# include "serial_link/protocol/transport.h" +# include "wpm.h" + +MASTER_TO_ALL_SLAVES_OBJECT(current_wpm, uint8_t); +static remote_object_t* remote_objects[] = { + REMOTE_OBJECT(current_wpm), +}; +static uint8_t last_sent_wpm = 0; +#endif + void init_serial_link_hal(void) { PORTA->PCR[1] = PORTx_PCRn_PE | PORTx_PCRn_PS | PORTx_PCRn_PFE | PORTx_PCRn_MUX(2); PORTA->PCR[2] = PORTx_PCRn_DSE | PORTx_PCRn_SRE | PORTx_PCRn_MUX(2); @@ -39,30 +50,30 @@ void init_serial_link_hal(void) { // Which will reduce the brightness range #define PRESCALAR_DEFINE 0 void lcd_backlight_hal_init(void) { - // Setup Backlight + // Setup Backlight SIM->SCGC6 |= SIM_SCGC6_FTM0; FTM0->CNT = 0; // Reset counter - // PWM Period - // 16-bit maximum - FTM0->MOD = 0xFFFF; + // PWM Period + // 16-bit maximum + FTM0->MOD = 0xFFFF; - // Set FTM to PWM output - Edge Aligned, Low-true pulses + // Set FTM to PWM output - Edge Aligned, Low-true pulses #define CNSC_MODE FTM_SC_CPWMS | FTM_SC_PS(4) | FTM_SC_CLKS(0) - CHANNEL_RED.CnSC = CNSC_MODE; - CHANNEL_GREEN.CnSC = CNSC_MODE; - CHANNEL_BLUE.CnSC = CNSC_MODE; + CHANNEL_RED.CnSC = CNSC_MODE; + CHANNEL_GREEN.CnSC = CNSC_MODE; + CHANNEL_BLUE.CnSC = CNSC_MODE; - // System clock, /w prescalar setting - FTM0->SC = FTM_SC_CLKS(1) | FTM_SC_PS(PRESCALAR_DEFINE); + // System clock, /w prescalar setting + FTM0->SC = FTM_SC_CLKS(1) | FTM_SC_PS(PRESCALAR_DEFINE); - CHANNEL_RED.CnV = 0; - CHANNEL_GREEN.CnV = 0; - CHANNEL_BLUE.CnV = 0; + CHANNEL_RED.CnV = 0; + CHANNEL_GREEN.CnV = 0; + CHANNEL_BLUE.CnV = 0; - RGB_PORT_GPIO->PDDR |= (1 << RED_PIN); - RGB_PORT_GPIO->PDDR |= (1 << GREEN_PIN); - RGB_PORT_GPIO->PDDR |= (1 << BLUE_PIN); + RGB_PORT_GPIO->PDDR |= (1 << RED_PIN); + RGB_PORT_GPIO->PDDR |= (1 << GREEN_PIN); + RGB_PORT_GPIO->PDDR |= (1 << BLUE_PIN); #define RGB_MODE PORTx_PCRn_SRE | PORTx_PCRn_DSE | PORTx_PCRn_MUX(4) RGB_PORT->PCR[RED_PIN] = RGB_MODE; @@ -94,9 +105,9 @@ static uint16_t cie_lightness(uint16_t v) { } void lcd_backlight_hal_color(uint16_t r, uint16_t g, uint16_t b) { - CHANNEL_RED.CnV = cie_lightness(r); - CHANNEL_GREEN.CnV = cie_lightness(g); - CHANNEL_BLUE.CnV = cie_lightness(b); + CHANNEL_RED.CnV = cie_lightness(r); + CHANNEL_GREEN.CnV = cie_lightness(g); + CHANNEL_BLUE.CnV = cie_lightness(b); } __attribute__ ((weak)) @@ -109,21 +120,39 @@ void matrix_scan_user(void) { void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up + // put your keyboard start-up code here + // runs once when the firmware starts up - matrix_init_user(); - // The backlight always has to be initialized, otherwise it will stay lit + matrix_init_user(); + // The backlight always has to be initialized, otherwise it will stay lit #ifndef VISUALIZER_ENABLE - lcd_backlight_hal_init(); + lcd_backlight_hal_init(); +#endif +#ifdef WPM_ENABLE + add_remote_objects(remote_objects, sizeof(remote_objects) / sizeof(remote_object_t*)); #endif } void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); + // put your looping keyboard code here + // runs every cycle (a lot) + +#ifdef WPM_ENABLE + if (is_serial_link_master()) { + uint8_t current_wpm = get_current_wpm(); + if (current_wpm != last_sent_wpm) { + *begin_write_current_wpm() = current_wpm; + end_write_current_wpm(); + last_sent_wpm = current_wpm; + } + } else if (is_serial_link_connected()) { + uint8_t* new_wpm = read_current_wpm(); + if (new_wpm) { + set_current_wpm(*new_wpm); + } + } +#endif + matrix_scan_user(); } bool is_keyboard_master(void) { diff --git a/keyboards/fjlabs/bolsa65/bolsa65.c b/keyboards/fjlabs/bolsa65/bolsa65.c new file mode 100644 index 000000000000..1d094ac8ebd7 --- /dev/null +++ b/keyboards/fjlabs/bolsa65/bolsa65.c @@ -0,0 +1,28 @@ +/* +Copyright 2020 +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "bolsa65.h" + +void matrix_init_kb(void) { + // Initialize indicator LEDs to output + setPinOutput(F7); // Caps + matrix_init_user(); +} + +bool led_update_kb(led_t led_state) { + bool res = led_update_user(led_state); + if(res) { + writePin(F7, led_state.caps_lock); + } + return res; +} diff --git a/keyboards/fjlabs/bolsa65/bolsa65.h b/keyboards/fjlabs/bolsa65/bolsa65.h new file mode 100644 index 000000000000..24325d0f195e --- /dev/null +++ b/keyboards/fjlabs/bolsa65/bolsa65.h @@ -0,0 +1,32 @@ +/* +Copyright 2020 +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "quantum.h" + +/* Bolsa65 Keymap Definitions */ +#define LAYOUT_65_ansi_blocker( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3E, \ + K40, K41, K42, K44, K49, K4A, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D, K3E }, \ + { K40, K41, K42, KC_NO, K44, KC_NO, KC_NO, KC_NO, KC_NO, K49, K4A, KC_NO, K4C, K4D, K4E } \ +} diff --git a/keyboards/fjlabs/bolsa65/config.h b/keyboards/fjlabs/bolsa65/config.h new file mode 100644 index 000000000000..c38da97076a2 --- /dev/null +++ b/keyboards/fjlabs/bolsa65/config.h @@ -0,0 +1,108 @@ +/* +Copyright 2020 + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x7074 // FJLabs +#define PRODUCT_ID 0x0001 // Bolsa65 +#define DEVICE_VER 0x0001 // Version 1 +#define MANUFACTURER FJLabs +#define PRODUCT bolsa65 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ + +// Checked with Eagle Schematic +#define MATRIX_ROW_PINS { F1, F0, F6, F5, F4 } +#define MATRIX_COL_PINS { C7, B1, B2, B3, B7, D0, D1, D2, D3, D5, D4, D6, D7, B4, B5 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* Define RGB Underglow +#define RGB_DI_PIN B0 +#define RGBLED_NUM 24 +#define RGBLIGHT_ANIMATIONS */ +/* #define RGBLIGHT_LAYER_BLINK*/ + +/* Define less important options */ + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION diff --git a/keyboards/fjlabs/bolsa65/info.json b/keyboards/fjlabs/bolsa65/info.json new file mode 100644 index 000000000000..2485c29f5c81 --- /dev/null +++ b/keyboards/fjlabs/bolsa65/info.json @@ -0,0 +1,84 @@ +{ + "keyboard_name": "Bolsa65", + "url": "https://www.bolsakeyboardsupply.com", + "maintainer": "FJLabs", + "width": 16, + "height": 5, + "layouts": { + "LAYOUT_65_ansi_blocker": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + {"x": 12, "y": 0}, + {"x": 13, "y": 0, "w": 2}, + {"x": 15, "y": 0}, + + {"x": 0, "y": 1, "w": 1.5}, + {"x": 1.5, "y": 1}, + {"x": 2.5, "y": 1}, + {"x": 3.5, "y": 1}, + {"x": 4.5, "y": 1}, + {"x": 5.5, "y": 1}, + {"x": 6.5, "y": 1}, + {"x": 7.5, "y": 1}, + {"x": 8.5, "y": 1}, + {"x": 9.5, "y": 1}, + {"x": 10.5, "y": 1}, + {"x": 11.5, "y": 1}, + {"x": 12.5, "y": 1}, + {"x": 13.5, "y": 1, "w": 1.5}, + {"x": 15, "y": 1}, + + {"x": 0, "y": 2, "w": 1.75}, + {"x": 1.75, "y": 2}, + {"x": 2.75, "y": 2}, + {"x": 3.75, "y": 2}, + {"x": 4.75, "y": 2}, + {"x": 5.75, "y": 2}, + {"x": 6.75, "y": 2}, + {"x": 7.75, "y": 2}, + {"x": 8.75, "y": 2}, + {"x": 9.75, "y": 2}, + {"x": 10.75, "y": 2}, + {"x": 11.75, "y": 2}, + {"x": 12.75, "y": 2, "w": 2.25}, + {"x": 15, "y": 2}, + + {"x": 0, "y": 3, "w": 2.25}, + {"x": 2.25, "y": 3}, + {"x": 3.25, "y": 3}, + {"x": 4.25, "y": 3}, + {"x": 5.25, "y": 3}, + {"x": 6.25, "y": 3}, + {"x": 7.25, "y": 3}, + {"x": 8.25, "y": 3}, + {"x": 9.25, "y": 3}, + {"x": 10.25, "y": 3}, + {"x": 11.25, "y": 3}, + {"x": 12.25, "y": 3, "w": 1.75}, + {"x": 14, "y": 3}, + {"x": 15, "y": 3}, + + {"x": 0, "y": 4, "w": 1.25}, + {"x": 1.25, "y": 4, "w": 1.25}, + {"x": 2.5, "y": 4, "w": 1.25}, + {"x": 3.75, "y": 4, "w": 6.25}, + {"x": 10, "y": 4, "w": 1.25}, + {"x": 11.25, "y": 4, "w": 1.25}, + {"x": 13, "y": 4}, + {"x": 14, "y": 4}, + {"x": 15, "y": 4} + ] + } + } +} diff --git a/keyboards/fjlabs/bolsa65/keymaps/default/keymap.c b/keyboards/fjlabs/bolsa65/keymaps/default/keymap.c new file mode 100644 index 000000000000..d36898e0c612 --- /dev/null +++ b/keyboards/fjlabs/bolsa65/keymaps/default/keymap.c @@ -0,0 +1,39 @@ +/* +Copyright 2020 +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +enum layers { + _LAYER0, + _LAYER1, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_LAYER0] = LAYOUT_65_ansi_blocker( + KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, TG(1), + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_ESC , + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [_LAYER1] = LAYOUT_65_ansi_blocker( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, TG(1), + KC_TRNS, RGB_TOG, RGB_RMOD, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_SPI, RGB_SPD, RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/fjlabs/bolsa65/keymaps/via/keymap.c b/keyboards/fjlabs/bolsa65/keymaps/via/keymap.c new file mode 100644 index 000000000000..0db9e52210a6 --- /dev/null +++ b/keyboards/fjlabs/bolsa65/keymaps/via/keymap.c @@ -0,0 +1,58 @@ +/* +Copyright 2020 +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +enum layers { + _LAYER0, + _LAYER1, + _LAYER2, + _LAYER3, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_LAYER0] = LAYOUT_65_ansi_blocker( + KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, TG(1), + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_ESC , + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [_LAYER1] = LAYOUT_65_ansi_blocker( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, TG(1), + KC_TRNS, RGB_TOG, RGB_RMOD, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_SPI, RGB_SPD, RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [_LAYER2] = LAYOUT_65_ansi_blocker( + KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [_LAYER3] = LAYOUT_65_ansi_blocker( + KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; diff --git a/keyboards/fjlabs/bolsa65/keymaps/via/rules.mk b/keyboards/fjlabs/bolsa65/keymaps/via/rules.mk new file mode 100644 index 000000000000..1e5b99807cb7 --- /dev/null +++ b/keyboards/fjlabs/bolsa65/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/fjlabs/bolsa65/readme.md b/keyboards/fjlabs/bolsa65/readme.md new file mode 100644 index 000000000000..e668f4b8c875 --- /dev/null +++ b/keyboards/fjlabs/bolsa65/readme.md @@ -0,0 +1,12 @@ +# bolsa65 + +The following is the QMK Firmware for the [BolsaKeyboardSupply](https://www.bolsakeyboardsupply.com) Bolsa65 mechanical keyboard. + +* Keyboard Maintainer: FJLabs +* Hardware Supported: Bolsa65 + +Make example for this keyboard (after setting up your build environment): + + make fjlabs/bolsa65:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/fjlabs/bolsa65/rules.mk b/keyboards/fjlabs/bolsa65/rules.mk new file mode 100644 index 000000000000..945e7be2eeb0 --- /dev/null +++ b/keyboards/fjlabs/bolsa65/rules.mk @@ -0,0 +1,28 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency +F_CPU = 8000000 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output +KEYBOARD_LOCK_ENABLE = yes + +LAYOUTS = 65_ansi_blocker diff --git a/keyboards/flehrad/bigswitch/keymaps/via/keymap.c b/keyboards/flehrad/bigswitch/keymaps/via/keymap.c new file mode 100644 index 000000000000..f253f4b12e03 --- /dev/null +++ b/keyboards/flehrad/bigswitch/keymaps/via/keymap.c @@ -0,0 +1,29 @@ +/* +Copyright 2020 MechMerlin + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT(KC_TRNS), + + [1] = LAYOUT(KC_TRNS), + + [2] = LAYOUT(KC_TRNS), + + [3] = LAYOUT(KC_TRNS) +}; diff --git a/keyboards/flehrad/bigswitch/keymaps/via/rules.mk b/keyboards/flehrad/bigswitch/keymaps/via/rules.mk new file mode 100644 index 000000000000..36b7ba9cbc98 --- /dev/null +++ b/keyboards/flehrad/bigswitch/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/gray_studio/hb85/config.h b/keyboards/gray_studio/hb85/config.h index f3fb20ec6b39..9309012a4105 100644 --- a/keyboards/gray_studio/hb85/config.h +++ b/keyboards/gray_studio/hb85/config.h @@ -17,8 +17,8 @@ along with this program. If not, see . #pragma once -#define VENDOR_ID 0x20A0 -#define PRODUCT_ID 0x422F +#define VENDOR_ID 0x4753 +#define PRODUCT_ID 0x2000 #define DEVICE_VER 0x0200 #define MANUFACTURER Gray Studio #define PRODUCT HB85 diff --git a/keyboards/gray_studio/hb85/keymaps/via/config.h b/keyboards/gray_studio/hb85/keymaps/via/config.h new file mode 100644 index 000000000000..c81bd53bb7f5 --- /dev/null +++ b/keyboards/gray_studio/hb85/keymaps/via/config.h @@ -0,0 +1,20 @@ +/* +Copyright 2020 MechMerlin + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/gray_studio/hb85/keymaps/via/keymap.c b/keyboards/gray_studio/hb85/keymaps/via/keymap.c new file mode 100644 index 000000000000..febf4715b8df --- /dev/null +++ b/keyboards/gray_studio/hb85/keymaps/via/keymap.c @@ -0,0 +1,56 @@ +/* +Copyright 2019 Felipe Coury + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_ESC , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , KC_DEL, +KC_GRV , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_MINS, KC_EQL , KC_BSPC, KC_BSPC, KC_PSLS, KC_PAST, KC_PMNS, +KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_LBRC, KC_RBRC, KC_BSLS, KC_P7 , KC_P8 , KC_P9 , +KC_CAPS, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_QUOT, KC_ENT , KC_P4 , KC_P5 , KC_P6 , +KC_LSFT, KC_NO , KC_Z , KC_Z , KC_X , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, KC_UP , KC_P1 , KC_P2 , KC_P3 , + KC_LCTL, KC_LALT, KC_SPC , KC_RALT, KC_RGUI, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0 , KC_PDOT + ), + + [1] = LAYOUT_all( + RESET , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, +_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, +_______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, +_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, +_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, +_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, +_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, +_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, +_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [3] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, +_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, +_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, +_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, +_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/gray_studio/hb85/keymaps/via/rules.mk b/keyboards/gray_studio/hb85/keymaps/via/rules.mk new file mode 100644 index 000000000000..36b7ba9cbc98 --- /dev/null +++ b/keyboards/gray_studio/hb85/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/gray_studio/hb85/readme.md b/keyboards/gray_studio/hb85/readme.md index 7e39f327c154..523f774c83da 100644 --- a/keyboards/gray_studio/hb85/readme.md +++ b/keyboards/gray_studio/hb85/readme.md @@ -4,7 +4,7 @@ A Sony HitBit MSX Computer inspired Keyboard. -* Keyboard Maintainer: [Felipe Coury](https://github.com/fcoury) +* Keyboard Maintainer: [Felipe Coury](https://github.com/fcoury), [MechMerlin](https://github.com/mechmerlin) * Hardware Supported: Gray Studio HB85 * Hardware Availability: [Group buy](https://en.zfrontier.com/products/gray-hb85) finished diff --git a/keyboards/handwired/3dp660/3dp660.c b/keyboards/handwired/3dp660/3dp660.c new file mode 100644 index 000000000000..3f655d359f5f --- /dev/null +++ b/keyboards/handwired/3dp660/3dp660.c @@ -0,0 +1,17 @@ + /* Copyright 2020 gooberpsycho + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "3dp660.h" diff --git a/keyboards/handwired/3dp660/3dp660.h b/keyboards/handwired/3dp660/3dp660.h new file mode 100644 index 000000000000..67288b1fc8d3 --- /dev/null +++ b/keyboards/handwired/3dp660/3dp660.h @@ -0,0 +1,35 @@ + /* Copyright 2020 gooberpsycho + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once +#include "quantum.h" + +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array +#define LAYOUT_66_ansi( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3C, k3D, \ + k40, k41, k42, k45, k49, k4A, k4B, k4C, k4D, k4E \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, KC_NO, KC_NO}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, KC_NO, k3C, k3D, KC_NO}, \ + {k40, k41, k42, KC_NO, KC_NO, k45, KC_NO, KC_NO, KC_NO, k49, k4A, k4B, k4C, k4D, k4E} \ +} diff --git a/keyboards/handwired/3dp660/config.h b/keyboards/handwired/3dp660/config.h new file mode 100644 index 000000000000..e719cf2c255d --- /dev/null +++ b/keyboards/handwired/3dp660/config.h @@ -0,0 +1,51 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6075 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Handwired +#define PRODUCT 3dp660 + +#define TAPPING_TERM 400 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +// ROWS: Top to bottom, COLS: Left to right + +#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7 } +#define MATRIX_COL_PINS { D2, D3, C6, C7, D5, D4, D7, B4, B5, B6, F7, F6, F5, F4, F1 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + diff --git a/keyboards/handwired/3dp660/info.json b/keyboards/handwired/3dp660/info.json new file mode 100644 index 000000000000..5b7825088519 --- /dev/null +++ b/keyboards/handwired/3dp660/info.json @@ -0,0 +1,80 @@ +{ + "keyboard_name": "3dp660", + "url": "", + "maintainer": "qmk", + "width": 15, + "height": 5, + "layouts": { + "LAYOUT_66_ansi": { + + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"1", "x":1, "y":0}, + {"label":"2", "x":2, "y":0}, + {"label":"3", "x":3, "y":0}, + {"label":"4", "x":4, "y":0}, + {"label":"5", "x":5, "y":0}, + {"label":"6", "x":6, "y":0}, + {"label":"7", "x":7, "y":0}, + {"label":"8", "x":8, "y":0}, + {"label":"9", "x":9, "y":0}, + {"label":"0", "x":10, "y":0}, + {"label":"-", "x":11, "y":0}, + {"label":"=", "x":12, "y":0}, + {"label":"BKSP", "x":13, "y":0, "w":2}, + {"label":"Insert", "x":15.5, "y":0}, + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[", "x":11.5, "y":1}, + {"label":"]", "x":12.5, "y":1}, + {"label":"|", "x":13.5, "y":1, "w":1.5}, + {"label":"Del", "x":15.5, "y":1}, + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";", "x":10.75, "y":2}, + {"label":"'", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",", "x":9.25, "y":3}, + {"label":".", "x":10.25, "y":3}, + {"label":"/", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":2.25}, + {"label":"Up", "x":14.5, "y":3}, + {"label":"CTRL", "x":0, "y":4, "w":1.25}, + {"label":"GUI", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"MO(1)", "x":11.25, "y":4}, + {"label":"CTRL", "x":12.25, "y":4, "w":1.25}, + {"label":"Left", "x":13.5, "y":4}, + {"label":"Down", "x":14.5, "y":4}, + {"label":"Right", "x":15.5, "y":4} + ] + } + } +} diff --git a/keyboards/handwired/3dp660/keymaps/default/keymap.c b/keyboards/handwired/3dp660/keymaps/default/keymap.c new file mode 100644 index 000000000000..e9eee115eba1 --- /dev/null +++ b/keyboards/handwired/3dp660/keymaps/default/keymap.c @@ -0,0 +1,34 @@ + /* Copyright 2020 gooberpsycho + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_66_ansi( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_66_ansi( + RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT + ), +}; diff --git a/keyboards/handwired/3dp660/keymaps/via/keymap.c b/keyboards/handwired/3dp660/keymaps/via/keymap.c new file mode 100644 index 000000000000..b39eabe49f19 --- /dev/null +++ b/keyboards/handwired/3dp660/keymaps/via/keymap.c @@ -0,0 +1,48 @@ + /* Copyright 2020 gooberpsycho + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_66_ansi( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_66_ansi( + RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT + ), + [2] = LAYOUT_66_ansi( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [3] = LAYOUT_66_ansi( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/handwired/3dp660/keymaps/via/rules.mk b/keyboards/handwired/3dp660/keymaps/via/rules.mk new file mode 100644 index 000000000000..1e5b99807cb7 --- /dev/null +++ b/keyboards/handwired/3dp660/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/handwired/3dp660/readme.md b/keyboards/handwired/3dp660/readme.md new file mode 100644 index 000000000000..dfece8ed46d1 --- /dev/null +++ b/keyboards/handwired/3dp660/readme.md @@ -0,0 +1,24 @@ +# 3dp660 + +![](https://i.imgur.com/KWyU57el.jpg) + +### Teensy 2.0 Pinout +| rows | 0 | 1 | 2 | 3 | 4 | +| --------------- | --- | --- | --- | --- | --- | +| Teensy/QMK pin | B0 | B1 | B2 | B3 | B7 | + +| columns | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | +| --------------- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | +| Teensy/QMK pin | D2 | D3 | C6 | C7 | D5 | D4 | D7 | B4 | B5 | B6 | F7 | F6 | F5 | F4 | F1 | + + +Make example for this keyboard (after setting up your build environment): + + make handwired/3dp660:default + +**Reset Key:** Hold down the key located at `k00`, commonly programmed as Escape while plugging in the keyboard. + +* Keyboard Maintainer: [gooberpsycho](https://github.com/gooberpsycho) +* Hardware Availability: [Casefile](https://www.thingiverse.com/thing:2897260) + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/3dp660/rules.mk b/keyboards/handwired/3dp660/rules.mk new file mode 100644 index 000000000000..d97f13a39d8e --- /dev/null +++ b/keyboards/handwired/3dp660/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = halfkay + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output +LTO_ENABLE = yes diff --git a/keyboards/handwired/curiosity/config.h b/keyboards/handwired/curiosity/config.h new file mode 100644 index 000000000000..8b632a5ec48b --- /dev/null +++ b/keyboards/handwired/curiosity/config.h @@ -0,0 +1,44 @@ +/* +Copyright 2020 Spaceman + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5342 // "SB" +#define PRODUCT_ID 0x4355 // "CU" +#define DEVICE_VER 0x0001 +#define MANUFACTURER Spaceman +#define PRODUCT Curiosity + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { D0, F7, F6, F5 } +#define MATRIX_COL_PINS { D3, D4, F4, C6, D7, E6, B5, B4, B1, B3, B2, B6 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE diff --git a/keyboards/handwired/curiosity/curiosity.c b/keyboards/handwired/curiosity/curiosity.c new file mode 100644 index 000000000000..e0a6e130e7d7 --- /dev/null +++ b/keyboards/handwired/curiosity/curiosity.c @@ -0,0 +1,16 @@ +/* Copyright 2020 Spaceman + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "curiosity.h" \ No newline at end of file diff --git a/keyboards/handwired/curiosity/curiosity.h b/keyboards/handwired/curiosity/curiosity.h new file mode 100644 index 000000000000..a79bfa6633ae --- /dev/null +++ b/keyboards/handwired/curiosity/curiosity.h @@ -0,0 +1,41 @@ +/* Copyright 2020 Spaceman + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +#define LAYOUT_small_mods( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k3b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k3a, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k39, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38 \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b }, \ +} +#define LAYOUT_large_mods( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k3b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38 \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, KC_NO, KC_NO, k3b }, \ +} diff --git a/keyboards/handwired/curiosity/info.json b/keyboards/handwired/curiosity/info.json new file mode 100644 index 000000000000..333868e1a7b9 --- /dev/null +++ b/keyboards/handwired/curiosity/info.json @@ -0,0 +1,25 @@ +{ + "keyboard_name": "Curiosity", + "url": "", + "maintainer": "Spaceman", + "width": 13.5, + "height": 4, + "layouts": { + "LAYOUT_small_mods": { + "layout": [ + {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0, "w":1.5}, + {"x":0, "y":1, "w":1.25}, {"x":1.25, "y":1}, {"x":2.25, "y":1}, {"x":3.25, "y":1}, {"x":4.25, "y":1}, {"x":5.25, "y":1}, {"x":6.25, "y":1}, {"x":7.25, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1}, {"x":11.25, "y":1}, {"x":12.25, "y":1, "w":1.25}, + {"x":0, "y":2, "w":1.5}, {"x":1.5, "y":2}, {"x":2.5, "y":2}, {"x":3.5, "y":2}, {"x":4.5, "y":2}, {"x":5.5, "y":2}, {"x":6.5, "y":2}, {"x":7.5, "y":2}, {"x":8.5, "y":2}, {"x":9.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, + {"x":0.75, "y":3, "w":1.25}, {"x":2, "y":3, "w":1.25}, {"x":3.25, "y":3, "w":1.25}, {"x":4.5, "y":3, "w":2}, {"x":6.5, "y":3, "w":2.25}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3} + ] + }, + "LAYOUT_large_mods": { + "layout": [ + {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0, "w":1.5}, + {"x":0, "y":1, "w":1.25}, {"x":1.25, "y":1}, {"x":2.25, "y":1}, {"x":3.25, "y":1}, {"x":4.25, "y":1}, {"x":5.25, "y":1}, {"x":6.25, "y":1}, {"x":7.25, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1}, {"x":11.25, "y":1, "w":2.25}, + {"x":0, "y":2, "w":1.5}, {"x":1.5, "y":2}, {"x":2.5, "y":2}, {"x":3.5, "y":2}, {"x":4.5, "y":2}, {"x":5.5, "y":2}, {"x":6.5, "y":2}, {"x":7.5, "y":2}, {"x":8.5, "y":2}, {"x":9.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2, "w":2}, + {"x":0.75, "y":3, "w":1.25}, {"x":2, "y":3, "w":1.25}, {"x":3.25, "y":3, "w":1.25}, {"x":4.5, "y":3, "w":2}, {"x":6.5, "y":3, "w":2.25}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3} + ] + } + } +} diff --git a/keyboards/handwired/curiosity/keymaps/default/keymap.c b/keyboards/handwired/curiosity/keymaps/default/keymap.c new file mode 100644 index 000000000000..741ad387db16 --- /dev/null +++ b/keyboards/handwired/curiosity/keymaps/default/keymap.c @@ -0,0 +1,33 @@ +/* Copyright 2020 Spaceman + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_small_mods( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(1), KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT + ), + + [1] = LAYOUT_small_mods( + KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +}; diff --git a/keyboards/handwired/curiosity/readme.md b/keyboards/handwired/curiosity/readme.md new file mode 100644 index 000000000000..eaf608e22105 --- /dev/null +++ b/keyboards/handwired/curiosity/readme.md @@ -0,0 +1,13 @@ +# The Curiosity + +40% Keyboard + +* Keyboard Maintainer: [Spaceman](https://github.com/Spaceman) +* Hardware Supported: Curiosity PCB +* Hardware Availability: N/A + +Make example for this keyboard (after setting up your build environment): + + make handwired/curiosity:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/curiosity/rules.mk b/keyboards/handwired/curiosity/rules.mk new file mode 100644 index 000000000000..dace27ef326d --- /dev/null +++ b/keyboards/handwired/curiosity/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output +LTO_ENABLE = no # Use link time optimization diff --git a/keyboards/handwired/onekey/blackpill_f401/config.h b/keyboards/handwired/onekey/blackpill_f401/config.h index c6166380cf26..829e84677f5f 100644 --- a/keyboards/handwired/onekey/blackpill_f401/config.h +++ b/keyboards/handwired/onekey/blackpill_f401/config.h @@ -23,7 +23,7 @@ #define UNUSED_PINS #define BACKLIGHT_PIN A0 -#define BACKLIGHT_PWM_DRIVER PWMD2 +#define BACKLIGHT_PWM_DRIVER PWMD5 #define BACKLIGHT_PWM_CHANNEL 1 #define RGB_DI_PIN A1 diff --git a/keyboards/handwired/onekey/blackpill_f401/halconf.h b/keyboards/handwired/onekey/blackpill_f401/halconf.h index d73c214ec64c..ae08512d4928 100644 --- a/keyboards/handwired/onekey/blackpill_f401/halconf.h +++ b/keyboards/handwired/onekey/blackpill_f401/halconf.h @@ -16,5 +16,6 @@ #pragma once #define HAL_USE_I2C TRUE +#define HAL_USE_PWM TRUE #include_next "halconf.h" diff --git a/keyboards/handwired/onekey/blackpill_f401/mcuconf.h b/keyboards/handwired/onekey/blackpill_f401/mcuconf.h index 33e07847b413..034a022db4dc 100644 --- a/keyboards/handwired/onekey/blackpill_f401/mcuconf.h +++ b/keyboards/handwired/onekey/blackpill_f401/mcuconf.h @@ -19,3 +19,6 @@ #undef STM32_I2C_USE_I2C1 #define STM32_I2C_USE_I2C1 TRUE + +#undef STM32_PWM_USE_TIM5 +#define STM32_PWM_USE_TIM5 TRUE diff --git a/keyboards/handwired/onekey/blackpill_f401/rules.mk b/keyboards/handwired/onekey/blackpill_f401/rules.mk index 609262049cad..6eb37a581d61 100644 --- a/keyboards/handwired/onekey/blackpill_f401/rules.mk +++ b/keyboards/handwired/onekey/blackpill_f401/rules.mk @@ -1,30 +1,8 @@ -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F4xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F401xC -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f4xx -# it should exist either in /os/hal/boards/ -# or /boards -BOARD = BLACKPILL_STM32_F401 -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m4 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -USE_FPU = yes -# Address of the booloader in system memory -STM32_BOOTLOADER_ADDRESS = 0x1FFF0000 +# MCU name +MCU = STM32F401 -# Options to pass to dfu-util when flashing -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -v 0483 -p df11 +# Address of the bootloader in system memory +STM32_BOOTLOADER_ADDRESS = 0x1FFF0000 # Build Options # change yes to no to disable diff --git a/keyboards/handwired/onekey/blackpill_f411/config.h b/keyboards/handwired/onekey/blackpill_f411/config.h index c6166380cf26..829e84677f5f 100644 --- a/keyboards/handwired/onekey/blackpill_f411/config.h +++ b/keyboards/handwired/onekey/blackpill_f411/config.h @@ -23,7 +23,7 @@ #define UNUSED_PINS #define BACKLIGHT_PIN A0 -#define BACKLIGHT_PWM_DRIVER PWMD2 +#define BACKLIGHT_PWM_DRIVER PWMD5 #define BACKLIGHT_PWM_CHANNEL 1 #define RGB_DI_PIN A1 diff --git a/keyboards/handwired/onekey/blackpill_f411/halconf.h b/keyboards/handwired/onekey/blackpill_f411/halconf.h index d73c214ec64c..ae08512d4928 100644 --- a/keyboards/handwired/onekey/blackpill_f411/halconf.h +++ b/keyboards/handwired/onekey/blackpill_f411/halconf.h @@ -16,5 +16,6 @@ #pragma once #define HAL_USE_I2C TRUE +#define HAL_USE_PWM TRUE #include_next "halconf.h" diff --git a/keyboards/handwired/onekey/blackpill_f411/mcuconf.h b/keyboards/handwired/onekey/blackpill_f411/mcuconf.h index 33e07847b413..034a022db4dc 100644 --- a/keyboards/handwired/onekey/blackpill_f411/mcuconf.h +++ b/keyboards/handwired/onekey/blackpill_f411/mcuconf.h @@ -19,3 +19,6 @@ #undef STM32_I2C_USE_I2C1 #define STM32_I2C_USE_I2C1 TRUE + +#undef STM32_PWM_USE_TIM5 +#define STM32_PWM_USE_TIM5 TRUE diff --git a/keyboards/handwired/onekey/blackpill_f411/rules.mk b/keyboards/handwired/onekey/blackpill_f411/rules.mk index f2e0f2b4f956..7cf886431fb7 100644 --- a/keyboards/handwired/onekey/blackpill_f411/rules.mk +++ b/keyboards/handwired/onekey/blackpill_f411/rules.mk @@ -1,30 +1,8 @@ -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F4xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F411xE -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f4xx -# it should exist either in /os/hal/boards/ -# or /boards -BOARD = BLACKPILL_STM32_F411 -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m4 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -USE_FPU = yes -# Address of the booloader in system memory -STM32_BOOTLOADER_ADDRESS = 0x1FFF0000 +# MCU name +MCU = STM32F411 -# Options to pass to dfu-util when flashing -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -v 0483 -p df11 +# Address of the bootloader in system memory +STM32_BOOTLOADER_ADDRESS = 0x1FFF0000 # Build Options # change yes to no to disable diff --git a/keyboards/handwired/onekey/rules.mk b/keyboards/handwired/onekey/rules.mk index 968e338e211d..ac343e166388 100644 --- a/keyboards/handwired/onekey/rules.mk +++ b/keyboards/handwired/onekey/rules.mk @@ -5,7 +5,7 @@ BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE = yes # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration +COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work diff --git a/keyboards/handwired/riblee_f401/config.h b/keyboards/handwired/riblee_f401/config.h index d8e7e7d62113..6e5c079799d0 100644 --- a/keyboards/handwired/riblee_f401/config.h +++ b/keyboards/handwired/riblee_f401/config.h @@ -27,10 +27,6 @@ #define MATRIX_ROWS 5 #define MATRIX_COLS 12 -// Testing with onekey -// #define MATRIX_ROW_PINS { A7 } -// #define MATRIX_COL_PINS { B0 } - #define MATRIX_ROW_PINS { A6, A5, A4, A3, A2 } #define MATRIX_COL_PINS { B10, B1, B0, B15, A8, B3, B4, B5, B6, B7, B8, B9 } #define UNUSED_PINS @@ -39,3 +35,7 @@ #define BACKLIGHT_PIN A0 #define BACKLIGHT_LEVELS 5 + +#define MOUSEKEY_INTERVAL 32 + +#define TAPPING_TERM 175 \ No newline at end of file diff --git a/keyboards/handwired/riblee_f401/keymaps/default/keymap.c b/keyboards/handwired/riblee_f401/keymaps/default/keymap.c index 40f64e189977..4bb18634eba2 100644 --- a/keyboards/handwired/riblee_f401/keymaps/default/keymap.c +++ b/keyboards/handwired/riblee_f401/keymaps/default/keymap.c @@ -40,7 +40,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Qwerty * ,-----------------------------------------------------------------------------------. - * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | * |------+------+------+------+------+------+------+------+------+------+------+------| * | Tab | Q | W | E | R | T | Y | U | I | O | P | Del | * |------+------+------+------+------+-------------+------+------+------+------+------| @@ -48,15 +48,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+------|------+------+------+------+------+------| * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Brite| Ctrl | Alt | GUI |Lower | Bksp |Space |Raise | Left | Down | Up |Right | + * | Brite| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | * `-----------------------------------------------------------------------------------' */ [_QWERTY] = LAYOUT_ortho_5x12( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, - BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_BSPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT + BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT ), /* Colemak @@ -111,7 +111,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+------|------+------+------+------+------+------| * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | | | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Next | Vol- | Vol+ | Play | + * | | | | | | BTN1 | BTN2 | | MS_L | MS_D | MS_U | MS_R | * `-----------------------------------------------------------------------------------' */ [_LOWER] = LAYOUT_ortho_5x12( @@ -119,7 +119,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),KC_HOME, KC_END, _______, - _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY + _______, _______, _______, _______, _______, KC_BTN1, KC_BTN2, _______, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R ), /* Raise @@ -147,24 +147,23 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ,-----------------------------------------------------------------------------------. * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | Reset| | | | | | | | | | Del | + * | |Reset |Debug | | | | | | | | | Del | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | |Aud on|AudOff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | + * | | |Mu mod|Aud on|AudOff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | * |------+------+------+------+------+------|------+------+------+------+------+------| - * | |Voice-|Voice+|Mus on|MusOff|MidiOn|MidOff| | | | | | + * | | | | | | | NKRO | Swap |Un swp| | | | * |------+------+------+------+------+------+------+------+------+------+------+------| * | | | | | | | | | | | | * `-----------------------------------------------------------------------------------' */ [_ADJUST] = LAYOUT_ortho_5x12( - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, - _______, RESET, DEBUG, _______, _______, _______, _______, TERM_ON, TERM_OFF,_______, _______, KC_DEL, - _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, - _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + _______, RESET, DEBUG, _______, _______, _______, _______, TERM_ON, TERM_OFF,_______, _______, KC_DEL, + _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, + _______, _______, _______, _______, _______, _______, NK_TOGG, LCG_SWP, LCG_NRM, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) - }; layer_state_t layer_state_set_user(layer_state_t state) { @@ -193,12 +192,12 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { break; case BACKLIT: if (record->event.pressed) { - register_code(KC_RSFT); + register_code(keycode_config(KC_LGUI)); #ifdef BACKLIGHT_ENABLE backlight_step(); #endif } else { - unregister_code(KC_RSFT); + unregister_code(keycode_config(KC_LGUI)); } return false; break; diff --git a/keyboards/handwired/riblee_f401/keymaps/riblee/keymap.c b/keyboards/handwired/riblee_f401/keymaps/riblee/keymap.c new file mode 100644 index 000000000000..33319542a71b --- /dev/null +++ b/keyboards/handwired/riblee_f401/keymaps/riblee/keymap.c @@ -0,0 +1,341 @@ +/* Copyright 2015-2017 Jack Humbert + * Copyright 2020 Daniel Reibl + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum preonic_layers { + _QWERTY, + _COLEMAK, + _DVORAK, + _LOWER, + _RAISE, + _ADJUST +}; + +enum preonic_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + BACKLIT +}; + +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) + +// Tap Dance declarations +enum { + TD_A, + TD_E, + TD_I, + TD_O, + TD_U, +}; + +const uint8_t shift = MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT); + +// Tap Dance functions +void dance_key_a (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + SEND_STRING("a"); + reset_tap_dance(state); + } else if (state->count == 2) { + if (!(keyboard_report->mods & shift)) { + send_unicode_string("á"); + } else { + send_unicode_string("Á"); + } + + reset_tap_dance(state); + } +} + +void dance_key_e (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + SEND_STRING("e"); + reset_tap_dance(state); + } else if (state->count == 2) { + if (!(keyboard_report->mods & shift)) { + send_unicode_string("é"); + } else { + send_unicode_string("É"); + } + + reset_tap_dance(state); + } +} + +void dance_key_i (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + SEND_STRING("i"); + reset_tap_dance(state); + } else if (state->count == 2) { + if (!(keyboard_report->mods & shift)) { + send_unicode_string("í"); + } else { + send_unicode_string("Í"); + } + + reset_tap_dance(state); + } +} + +void dance_key_o (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + SEND_STRING("o"); + reset_tap_dance(state); + } else if (state->count == 2) { + if (!(keyboard_report->mods & shift)) { + send_unicode_string("ó"); + } else { + send_unicode_string("Ó"); + } + + reset_tap_dance(state); + } else if (state->count == 3) { + if (!(keyboard_report->mods & shift)) { + send_unicode_string("ö"); + } else { + send_unicode_string("Ö"); + } + + reset_tap_dance(state); + } else if (state->count == 4) { + if (!(keyboard_report->mods & shift)) { + send_unicode_string("ő"); + } else { + send_unicode_string("Ő"); + } + + reset_tap_dance(state); + } +} + +void dance_key_u (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + SEND_STRING("u"); + reset_tap_dance(state); + } else if (state->count == 2) { + if (!(keyboard_report->mods & shift)) { + send_unicode_string("ú"); + } else { + send_unicode_string("Ú"); + } + + reset_tap_dance(state); + } else if (state->count == 3) { + if (!(keyboard_report->mods & shift)) { + send_unicode_string("ü"); + } else { + send_unicode_string("Ü"); + } + + reset_tap_dance(state); + } else if (state->count == 4) { + if (!(keyboard_report->mods & shift)) { + send_unicode_string("ű"); + } else { + send_unicode_string("Ű"); + } + + reset_tap_dance(state); + } +} + +// Tap Dance definitions +qk_tap_dance_action_t tap_dance_actions[] = { + [TD_A] = ACTION_TAP_DANCE_FN(dance_key_a), + [TD_E] = ACTION_TAP_DANCE_FN(dance_key_e), + [TD_I] = ACTION_TAP_DANCE_FN(dance_key_i), + [TD_O] = ACTION_TAP_DANCE_FN(dance_key_o), + [TD_U] = ACTION_TAP_DANCE_FN(dance_key_u), +}; + +// Tap Dance keys +#define C_KC_A TD(TD_A) +#define C_KC_E TD(TD_E) +#define C_KC_I TD(TD_I) +#define C_KC_O TD(TD_O) +#define C_KC_U TD(TD_U) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = LAYOUT_ortho_5x12( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_TAB, KC_Q, KC_W, C_KC_E, KC_R, KC_T, KC_Y, C_KC_U, C_KC_I, C_KC_O, KC_P, KC_DEL, + KC_ESC, C_KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, + BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = LAYOUT_ortho_5x12( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_DEL, + KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, + BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | " | , | . | P | Y | F | G | C | R | L | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = LAYOUT_ortho_5x12( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_DEL, + KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT, + BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | BTN1 | BTN2 | | MS_L | MS_D | MS_U | MS_R | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = LAYOUT_ortho_5x12( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),KC_HOME, KC_END, _______, + _______, _______, _______, _______, _______, KC_BTN1, KC_BTN2, _______, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R +), + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = LAYOUT_ortho_5x12( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, + KC_LSFT, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY +), + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | |Reset |Debug | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | |Mu mod|Aud on|AudOff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | NKRO | Swap |Un swp| | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = LAYOUT_ortho_5x12( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + _______, RESET, DEBUG, _______, _______, _______, _______, TERM_ON, TERM_OFF,_______, _______, KC_DEL, + _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, + _______, _______, _______, _______, _______, _______, NK_TOGG, LCG_SWP, LCG_NRM, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +) + +}; + +layer_state_t layer_state_set_user(layer_state_t state) { + return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_DVORAK); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(keycode_config(KC_LGUI)); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(keycode_config(KC_LGUI)); + } + return false; + break; + } + return true; +}; diff --git a/keyboards/handwired/riblee_f401/keymaps/riblee/readme.md b/keyboards/handwired/riblee_f401/keymaps/riblee/readme.md new file mode 100644 index 000000000000..1045c9881863 --- /dev/null +++ b/keyboards/handwired/riblee_f401/keymaps/riblee/readme.md @@ -0,0 +1,85 @@ +# Riblee preonic + +This layout is modified to support accent Hungarian keys via Unicode and Tap Dance + +``` + +Qwerty +,-----------------------------------------------------------------------------------. +| ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | +|------+------+------+------+------+------+------+------+------+------+------+------| +| Tab | Q | W | E | R | T | Y | U | I | O | P | Del | +|------+------+------+------+------+-------------+------+------+------+------+------| +| Esc | A | S | D | F | G | H | J | K | L | ; | " | +|------+------+------+------+------+------|------+------+------+------+------+------| +| Shift| Z | X | C | V | B | N | M | , | . | / |Enter | +|------+------+------+------+------+------+------+------+------+------+------+------| +| Brite| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | +`-----------------------------------------------------------------------------------' + +Colemak +,-----------------------------------------------------------------------------------. +| ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | +|------+------+------+------+------+------+------+------+------+------+------+------| +| Tab | Q | W | F | P | G | J | L | U | Y | ; | Del | +|------+------+------+------+------+-------------+------+------+------+------+------| +| Esc | A | R | S | T | D | H | N | E | I | O | " | +|------+------+------+------+------+------|------+------+------+------+------+------| +| Shift| Z | X | C | V | B | K | M | , | . | / |Enter | +|------+------+------+------+------+------+------+------+------+------+------+------| +| Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | +`-----------------------------------------------------------------------------------' + +Dvorak +,-----------------------------------------------------------------------------------. +| ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | +|------+------+------+------+------+------+------+------+------+------+------+------| +| Tab | " | , | . | P | Y | F | G | C | R | L | Del | +|------+------+------+------+------+-------------+------+------+------+------+------| +| Esc | A | O | E | U | I | D | H | T | N | S | / | +|------+------+------+------+------+------|------+------+------+------+------+------| +| Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | +|------+------+------+------+------+------+------+------+------+------+------+------| +| Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | +`-----------------------------------------------------------------------------------' + +Lower +,-----------------------------------------------------------------------------------. +| ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | +|------+------+------+------+------+-------------+------+------+------+------+------| +| ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | +|------+------+------+------+------+-------------+------+------+------+------+------| +| Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | +|------+------+------+------+------+------|------+------+------+------+------+------| +| | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | | | +|------+------+------+------+------+------+------+------+------+------+------+------| +| | | | | | BTN1 | BTN2 | | MS_L | MS_D | MS_U | MS_R | +`-----------------------------------------------------------------------------------' + +Raise +,-----------------------------------------------------------------------------------. +| ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | +|------+------+------+------+------+------+------+------+------+------+------+------| +| F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | +|------+------+------+------+------+-------------+------+------+------+------+------| +| Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | +|------+------+------+------+------+------|------+------+------+------+------+------| +| Shift| F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | | | +|------+------+------+------+------+------+------+------+------+------+------+------| +| | | | | | | | Next | Vol- | Vol+ | Play | +`-----------------------------------------------------------------------------------' + +Adjust (Lower + Raise) +,-----------------------------------------------------------------------------------. +| F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | +|------+------+------+------+------+------+------+------+------+------+------+------| +| |Reset |Debug | | | | | | | | | Del | +|------+------+------+------+------+-------------+------+------+------+------+------| +| | |Mu mod|Aud on|AudOff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | +|------+------+------+------+------+------|------+------+------+------+------+------| +| | | | | | | NKRO | Swap |Un swp| | | | +|------+------+------+------+------+------+------+------+------+------+------+------| +| | | | | | | | | | | | +`-----------------------------------------------------------------------------------' + +``` \ No newline at end of file diff --git a/keyboards/handwired/riblee_f401/keymaps/riblee/rules.mk b/keyboards/handwired/riblee_f401/keymaps/riblee/rules.mk new file mode 100644 index 000000000000..517f2700e142 --- /dev/null +++ b/keyboards/handwired/riblee_f401/keymaps/riblee/rules.mk @@ -0,0 +1,2 @@ +UNICODE_ENABLE = yes +TAP_DANCE_ENABLE = yes \ No newline at end of file diff --git a/keyboards/handwired/riblee_f401/rules.mk b/keyboards/handwired/riblee_f401/rules.mk index eab426a375cd..bd4592d504c9 100644 --- a/keyboards/handwired/riblee_f401/rules.mk +++ b/keyboards/handwired/riblee_f401/rules.mk @@ -1,35 +1,13 @@ -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F4xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F401xC -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f4xx -# it should exist either in /os/hal/boards/ -# or /boards -BOARD = BLACKPILL_STM32_F401 -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m4 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -USE_FPU = yes -# Address of the booloader in system memory -STM32_BOOTLOADER_ADDRESS = 0x1FFF0000 +# MCU name +MCU = STM32F401 -# Options to pass to dfu-util when flashing -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -v 0483 -p df11 +# Address of the bootloader in system memory +STM32_BOOTLOADER_ADDRESS = 0x1FFF0000 # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = full # Virtual DIP switch configuration MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control KEYBOARD_SHARED_EP = yes @@ -38,9 +16,9 @@ COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover +NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality BACKLIGHT_DRIVER = software RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow BLUETOOTH_ENABLE = no # Enable Bluetooth -AUDIO_ENABLE = no # Audio output \ No newline at end of file +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/swiftrax/retropad/config.h b/keyboards/handwired/swiftrax/retropad/config.h new file mode 100644 index 000000000000..e604eda41939 --- /dev/null +++ b/keyboards/handwired/swiftrax/retropad/config.h @@ -0,0 +1,64 @@ +/* +Copyright 2020 Swiftrax + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x04D8 +#define PRODUCT_ID 0xEB0C +#define DEVICE_VER 0x0001 +#define MANUFACTURER Swiftrax +#define PRODUCT Retropad + +/* key matrix size */ +#define MATRIX_ROWS 3 +#define MATRIX_COLS 2 + +// ROWS: Top to bottom, COLS: Left to right + +#define MATRIX_ROW_PINS { C7, C6, B5 } +#define MATRIX_COL_PINS { B4, D2 } + +#define ENCODERS_PAD_A { D0 } +#define ENCODERS_PAD_B { D1 } + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +#define RGB_DI_PIN B7 +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 6 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#endif + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/*EEPROM for via*/ +#define DYNAMIC_KEYMAP_LAYER_COUNT 3 + +/* bootmagic row col assignment */ +#define BOOTMAGIC_LITE_ROW 1 +#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/swiftrax/retropad/info.json b/keyboards/handwired/swiftrax/retropad/info.json new file mode 100644 index 000000000000..9637c7b3f73f --- /dev/null +++ b/keyboards/handwired/swiftrax/retropad/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "Retropad", + "url": "https://github.com/swiftrax", + "maintainer": "swiftrax", + "width": 2, + "height": 3.5, + "layouts": { + "LAYOUT": { + "layout": [{"label":"0,1", "x":0.5, "y":0}, {"label":"1,0", "x":0, "y":1.5}, {"label":"1,1", "x":1, "y":1.5}, {"label":"2,0", "x":0, "y":2.5}, {"label":"2,1", "x":1, "y":2.5}] + } + } +} \ No newline at end of file diff --git a/keyboards/handwired/swiftrax/retropad/keymaps/default/keymap.c b/keyboards/handwired/swiftrax/retropad/keymaps/default/keymap.c new file mode 100644 index 000000000000..8b9992e1d731 --- /dev/null +++ b/keyboards/handwired/swiftrax/retropad/keymaps/default/keymap.c @@ -0,0 +1,69 @@ + /* Copyright 2020 swiftrax + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[0] = LAYOUT( + TO(1), //windows + KC_MSTP, KC_MPLY, + KC_MPRV, KC_MNXT), + +[1] = LAYOUT( //macOS + TO(2), + KC_MSTP, KC_MPLY, + KC_MRWD, KC_MFFD), + +[2] = LAYOUT( + TO(0), + KC_HOME, KC_PGUP, + KC_END, KC_PGDN), +}; + +void encoder_update_user(uint8_t index, bool clockwise) { + if(IS_LAYER_ON(2)){ + if (clockwise) + tap_code(KC_LEFT); + else + tap_code(KC_RGHT); + } + else{ + if(clockwise) + tap_code(KC_VOLU); + else + tap_code(KC_VOLD); + } +} + +void matrix_init_user(void) { + // set top LED to output and off (active low) + setPinOutput(D5); + writePinHigh(D5); + // set middle LED to output and off (active low) + setPinOutput(D4); + writePinHigh(D4); + // set bottom LED to output and off (active low) + setPinOutput(D3); + writePinHigh(D3); +} + +// write to above indicators in a binary fashion based on current layer +layer_state_t layer_state_set_user(layer_state_t state) { + writePin(D5, get_highest_layer(state)); + writePin(D4, !layer_state_cmp(state, 1)); + writePin(D3, !layer_state_cmp(state, 2)); + return state; +} \ No newline at end of file diff --git a/keyboards/handwired/swiftrax/retropad/keymaps/via/keymap.c b/keyboards/handwired/swiftrax/retropad/keymaps/via/keymap.c new file mode 100644 index 000000000000..8b9992e1d731 --- /dev/null +++ b/keyboards/handwired/swiftrax/retropad/keymaps/via/keymap.c @@ -0,0 +1,69 @@ + /* Copyright 2020 swiftrax + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[0] = LAYOUT( + TO(1), //windows + KC_MSTP, KC_MPLY, + KC_MPRV, KC_MNXT), + +[1] = LAYOUT( //macOS + TO(2), + KC_MSTP, KC_MPLY, + KC_MRWD, KC_MFFD), + +[2] = LAYOUT( + TO(0), + KC_HOME, KC_PGUP, + KC_END, KC_PGDN), +}; + +void encoder_update_user(uint8_t index, bool clockwise) { + if(IS_LAYER_ON(2)){ + if (clockwise) + tap_code(KC_LEFT); + else + tap_code(KC_RGHT); + } + else{ + if(clockwise) + tap_code(KC_VOLU); + else + tap_code(KC_VOLD); + } +} + +void matrix_init_user(void) { + // set top LED to output and off (active low) + setPinOutput(D5); + writePinHigh(D5); + // set middle LED to output and off (active low) + setPinOutput(D4); + writePinHigh(D4); + // set bottom LED to output and off (active low) + setPinOutput(D3); + writePinHigh(D3); +} + +// write to above indicators in a binary fashion based on current layer +layer_state_t layer_state_set_user(layer_state_t state) { + writePin(D5, get_highest_layer(state)); + writePin(D4, !layer_state_cmp(state, 1)); + writePin(D3, !layer_state_cmp(state, 2)); + return state; +} \ No newline at end of file diff --git a/keyboards/handwired/swiftrax/retropad/keymaps/via/rules.mk b/keyboards/handwired/swiftrax/retropad/keymaps/via/rules.mk new file mode 100644 index 000000000000..036bd6d1c3ec --- /dev/null +++ b/keyboards/handwired/swiftrax/retropad/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes \ No newline at end of file diff --git a/keyboards/handwired/swiftrax/retropad/readme.md b/keyboards/handwired/swiftrax/retropad/readme.md new file mode 100644 index 000000000000..5dd2e2dff5f1 --- /dev/null +++ b/keyboards/handwired/swiftrax/retropad/readme.md @@ -0,0 +1,13 @@ +# Retropad + +2x2 macro pad with a rotary encoder + +* Keyboard Maintainer: Swiftrax +* Hardware Supported: Retropad PCB +* Hardware Availability: https://github.com/swiftrax + +Make example for this keyboard (after setting up your build environment): + + make handwired/swiftrax/retropad:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/swiftrax/retropad/retropad.c b/keyboards/handwired/swiftrax/retropad/retropad.c new file mode 100644 index 000000000000..3ffe29528f16 --- /dev/null +++ b/keyboards/handwired/swiftrax/retropad/retropad.c @@ -0,0 +1,16 @@ +/* Copyright 2020 swiftrax + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "retropad.h" \ No newline at end of file diff --git a/keyboards/handwired/swiftrax/retropad/retropad.h b/keyboards/handwired/swiftrax/retropad/retropad.h new file mode 100644 index 000000000000..e7527d5c004f --- /dev/null +++ b/keyboards/handwired/swiftrax/retropad/retropad.h @@ -0,0 +1,31 @@ +/* Copyright 2020 swiftrax + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +// readability +#define XXX KC_NO + +#define LAYOUT( \ + K001, \ + K100, K101, \ + K200, K201 \ +) { \ + { XXX, K001, }, \ + { K100, K101, }, \ + { K200, K201, } \ +} diff --git a/keyboards/handwired/swiftrax/retropad/rules.mk b/keyboards/handwired/swiftrax/retropad/rules.mk new file mode 100644 index 000000000000..8771c701de78 --- /dev/null +++ b/keyboards/handwired/swiftrax/retropad/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u2 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output +ENCODER_ENABLE = yes diff --git a/keyboards/handwired/t111/chconf.h b/keyboards/handwired/t111/chconf.h new file mode 100644 index 000000000000..f5e471640c56 --- /dev/null +++ b/keyboards/handwired/t111/chconf.h @@ -0,0 +1,714 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file rt/templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ +#define _CHIBIOS_RT_CONF_VER_6_0_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_ST_RESOLUTION) +#define CH_CFG_ST_RESOLUTION 32 +#endif + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#if !defined(CH_CFG_ST_FREQUENCY) +#define CH_CFG_ST_FREQUENCY 100000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#if !defined(CH_CFG_ST_TIMEDELTA) +#define CH_CFG_ST_TIMEDELTA 0 +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 0 +#endif + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#if !defined(CH_CFG_MEMCORE_SIZE) +#define CH_CFG_MEMCORE_SIZE 0 +#endif + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#if !defined(CH_CFG_NO_IDLE_THREAD) +#define CH_CFG_NO_IDLE_THREAD FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) +#define CH_CFG_OPTIMIZE_SPEED TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_TM) +#define CH_CFG_USE_TM FALSE +#endif + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_REGISTRY) +#define CH_CFG_USE_REGISTRY TRUE +#endif + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_WAITEXIT) +#define CH_CFG_USE_WAITEXIT TRUE +#endif + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_SEMAPHORES) +#define CH_CFG_USE_SEMAPHORES TRUE +#endif + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MUTEXES) +#define CH_CFG_USE_MUTEXES TRUE +#endif + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_CONDVARS) +#define CH_CFG_USE_CONDVARS TRUE +#endif + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE +#endif + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_EVENTS) +#define CH_CFG_USE_EVENTS TRUE +#endif + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MESSAGES) +#define CH_CFG_USE_MESSAGES TRUE +#endif + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_MAILBOXES) +#define CH_CFG_USE_MAILBOXES TRUE +#endif + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMCORE) +#define CH_CFG_USE_MEMCORE TRUE +#endif + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#if !defined(CH_CFG_USE_HEAP) +#define CH_CFG_USE_HEAP TRUE +#endif + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMPOOLS) +#define CH_CFG_USE_MEMPOOLS FALSE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS FALSE +#endif + +/** + * @brief Pipes APIs. + * @details If enabled then the pipes APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_PIPES) +#define CH_CFG_USE_PIPES FALSE +#endif + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#if !defined(CH_CFG_USE_DYNAMIC) +#define CH_CFG_USE_DYNAMIC FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY FALSE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES FALSE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES FALSE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS FALSE +#endif + +/** + * @brief Enables factory for Pipes. + */ +#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) +#define CH_CFG_FACTORY_PIPES FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_STATISTICS) +#define CH_DBG_STATISTICS FALSE +#endif + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) +#define CH_DBG_SYSTEM_STATE_CHECK FALSE +#endif + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS FALSE +#endif + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS FALSE +#endif + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK FALSE +#endif + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS FALSE +#endif + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#if !defined(CH_DBG_THREADS_PROFILING) +#define CH_DBG_THREADS_PROFILING FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p _thread_init() function. + * + * @note It is invoked from within @p _thread_init() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/handwired/t111/config.h b/keyboards/handwired/t111/config.h new file mode 100644 index 000000000000..e459e7659eb8 --- /dev/null +++ b/keyboards/handwired/t111/config.h @@ -0,0 +1,92 @@ +/* +Copyright 2020 DmNosachev + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6FAA +#define DEVICE_VER 0x0001 +#define MANUFACTURER FUJITSU +#define PRODUCT T111 + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 14 + +#define MATRIX_ROW_PINS { A15, B6, B5, B4, B3, B9, B8, B7 } +/* 0 1 2 3 4 5 6 7*/ +#define MATRIX_COL_PINS { B15, B11, B10, B1, B0, A10, A9, A7, A6, A5, A4, A8, B13, B14 } +/* 0 1 2 3 4 5 6 7 8 9 A B C D*/ + +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION ROW2COL + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/t111/halconf.h b/keyboards/handwired/t111/halconf.h new file mode 100644 index 000000000000..ff5ae7e8a5f6 --- /dev/null +++ b/keyboards/handwired/t111/halconf.h @@ -0,0 +1,525 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#define _CHIBIOS_HAL_CONF_ +#define _CHIBIOS_HAL_CONF_VER_7_0_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM TRUE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SIO subsystem. + */ +#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) +#define HAL_USE_SIO FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the TRNG subsystem. + */ +#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) +#define HAL_USE_TRNG FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/** + * @brief Enables the WSPI subsystem. + */ +#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) +#define HAL_USE_WSPI FALSE +#endif + +/*===========================================================================*/ +/* PAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) +#define PAL_USE_CALLBACKS FALSE +#endif + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) +#define PAL_USE_WAIT FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/** + * @brief Enforces the driver to use direct callbacks rather than OSAL events. + */ +#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) +#define CAN_ENFORCE_USE_CALLBACKS FALSE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* DAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) +#define DAC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define DAC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the zero-copy API. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/** + * @brief OCR initialization constant for V20 cards. + */ +#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) +#define SDC_INIT_OCR_V20 0x50FF8000U +#endif + +/** + * @brief OCR initialization constant for non-V20 cards. + */ +#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) +#define SDC_INIT_OCR 0x80100000U +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 1 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables circular transfers APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) +#define SPI_USE_CIRCULAR FALSE +#endif + + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/** + * @brief Handling method for SPI CS line. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) +#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +/*===========================================================================*/ +/* WSPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) +#define WSPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define WSPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/keyboards/handwired/t111/info.json b/keyboards/handwired/t111/info.json new file mode 100644 index 000000000000..b31fed51631d --- /dev/null +++ b/keyboards/handwired/t111/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "t111", + "url": "", + "maintainer": "DmNosachev", + "width": 21.75, + "height": 6.5, + "layouts": { + "LAYOUT": { + "layout": [{"label":"Break", "x":0, "y":0}, {"label":"PF1", "x":2, "y":0}, {"label":"PF2", "x":3, "y":0}, {"label":"PF3", "x":4, "y":0}, {"label":"PF4", "x":5, "y":0}, {"label":"PF5", "x":6, "y":0}, {"label":"PF6", "x":7, "y":0}, {"label":"PF7", "x":8, "y":0}, {"label":"PF8", "x":9, "y":0}, {"label":"PF9", "x":10, "y":0}, {"label":"PF10", "x":11, "y":0}, {"label":"PF11", "x":12, "y":0}, {"label":"PF12", "x":13, "y":0}, {"label":"PF13", "x":14, "y":0}, {"label":"PF14", "x":15, "y":0}, {"label":"PF15", "x":16, "y":0}, {"label":"PF16", "x":17, "y":0}, {"label":"Esc", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"~", "x":13, "y":1.5}, {"label":"bkspc", "x":14, "y":1.5, "w":1.25}, {"label":"Ins", "x":15.5, "y":1.5}, {"label":"Cls", "x":16.5, "y":1.5}, {"label":"*", "x":17.75, "y":1.5}, {"label":"/", "x":18.75, "y":1.5}, {"label":"+", "x":19.75, "y":1.5}, {"label":"-", "x":20.75, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"El", "x":15.5, "y":2.5}, {"label":"Dup", "x":16.5, "y":2.5}, {"label":"7", "x":17.75, "y":2.5}, {"label":"8", "x":18.75, "y":2.5}, {"label":"9", "x":19.75, "y":2.5}, {"label":"=", "x":20.75, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"|", "x":12.75, "y":3.5}, {"label":"Enter", "x":13.75, "y":2.5, "w":1.5, "h":2}, {"label":"Del", "x":15.5, "y":3.5}, {"label":"Home", "x":16.5, "y":3.5}, {"label":"4", "x":17.75, "y":3.5}, {"label":"5", "x":18.75, "y":3.5}, {"label":"6", "x":19.75, "y":3.5}, {"label":",", "x":20.75, "y":3.5}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"x":12.25, "y":4.5}, {"label":"Shift", "x":13.25, "y":4.5, "w":2}, {"label":"\u0432\u2020\u2018", "x":15.5, "y":4.5}, {"label":"\u0432\u2020\u201c", "x":16.5, "y":4.5}, {"label":"1", "x":17.75, "y":4.5}, {"label":"2", "x":18.75, "y":4.5}, {"label":"3", "x":19.75, "y":4.5}, {"label":"Enter", "x":20.75, "y":4.5, "h":2}, {"label":"Caps", "x":1.75, "y":5.5}, {"label":"Graph", "x":2.75, "y":5.5, "w":1.5}, {"x":4.25, "y":5.5, "w":8}, {"label":"Alt", "x":12.25, "y":5.5, "w":1.5}, {"label":"\u0432\u2020\u0452", "x":15.5, "y":5.5}, {"label":"\u0432\u2020\u2019", "x":16.5, "y":5.5}, {"label":"0", "x":17.75, "y":5.5, "w":2}, {"label":".", "x":19.75, "y":5.5}] + } + } +} diff --git a/keyboards/handwired/t111/keymaps/default/keymap.c b/keyboards/handwired/t111/keymaps/default/keymap.c new file mode 100644 index 000000000000..e76a837db2f1 --- /dev/null +++ b/keyboards/handwired/t111/keymaps/default/keymap.c @@ -0,0 +1,50 @@ +/* Copyright 2020 DmNosachev + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* + * ,-------------------------------------------------------------------------------------------------------------------------------------. + * | xxx | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | xxx |PrnSc| ScLk|Pause| | + * |-------------------------------------------------------------------------------------------------------------------------------------| + * | esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | ~ |backspc| | ins | del | |NumLk| / | * | - | + * |-------------------------------------------------------------------------------------------------------------------------------------| + * | tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | enter | PgUp| PgDn| | 7 | 8 | 9 | += | + * |-------------------------------------------------------------------------------- |--------------------------------------| + * | ctrl | A | S | D | F | G | H | J | K | L | ;: | '" | |\ | | home| end | | 4 | 5 | 6 | + | + * |-------------------------------------------------------------------------------------------------------------------------------------| + * | shift | Z | X | C | V | B | N | M | , | . | /? | ctrl| shift | up | down| | 1 | 2 | 3 |enter| + * |-------------------------------------------------------------------------------------------------------------------------------| | + * | | gui | alt | Space | alt | | left|right| | 0 | . | | + * `-------------------------------------------------------------------------------------------------------------------------------------' +*/ + [0] = LAYOUT( + KC_NO, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_INS, KC_DEL, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_PGUP, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_EQL, + KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_HOME, KC_END, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RCTRL, KC_RSFT, KC_UP, KC_DOWN, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_LEFT, KC_RGHT, KC_P0, KC_PDOT + ) +}; + +void keyboard_post_init_user(void) { + // Customise these values to desired behaviour + debug_enable=true; + debug_matrix=true; + //debug_keyboard=true; + //debug_mouse=true; +} diff --git a/keyboards/handwired/t111/keymaps/oleg/config.h b/keyboards/handwired/t111/keymaps/oleg/config.h new file mode 100644 index 000000000000..22ae5bcf4cba --- /dev/null +++ b/keyboards/handwired/t111/keymaps/oleg/config.h @@ -0,0 +1,20 @@ +/* +Copyright 2020 DmNosachev + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#define UNICODE_SELECTED_MODES UC_WIN, UC_WINC \ No newline at end of file diff --git a/keyboards/handwired/t111/keymaps/oleg/keymap.c b/keyboards/handwired/t111/keymaps/oleg/keymap.c new file mode 100644 index 000000000000..63342af79fdc --- /dev/null +++ b/keyboards/handwired/t111/keymaps/oleg/keymap.c @@ -0,0 +1,145 @@ +/* Copyright 2020 DmNosachev + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H +#include "debug.h" +#include "version.h" + +enum custom_keycodes { + VRSN = SAFE_RANGE, + MC1 +}; + +enum unicode_names { + USCT, + ULSB, + URSB, + USCO, + UAPO, + UCOM, + UDOT, + USLS, + ULCB, + URCB, + UCLN, + UQOT, + ULTH, + UGTH, + UQUE, + UGRV, + UTLD, + UAT, + UHSH, + UDLR, + UPCT, + UCFX, + UAMP, + UAST +}; + +const uint32_t PROGMEM unicode_map[] = { + [USCT] = 0x00A7, // § + [ULSB] = 0x005B, // [ + [URSB] = 0x005D, // ] + [USCO] = 0x003B, // ; + [UAPO] = 0x0027, // ' + [UCOM] = 0x002C, // , + [UDOT] = 0x002E, // . + [USLS] = 0x002F, // slash + [ULCB] = 0x007B, // { + [URCB] = 0x007D, // } + [UCLN] = 0x003A, // : + [UQOT] = 0x0022, // " + [ULTH] = 0x003C, // < + [UGTH] = 0x003E, // > + [UQUE] = 0x003F, // ? + [UGRV] = 0x0060, // ` + [UTLD] = 0x007E, // ~ + [UAT] = 0x0040, // at + [UHSH] = 0x0023, // hash + [UDLR] = 0x0024, // dollar + [UPCT] = 0x0025, // percent + [UCFX] = 0x005E, // ^ + [UAMP] = 0x0026, // & + [UAST] = 0x002A, // asterisk +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* + * ,-------------------------------------------------------------------------------------------------------------------------------------. + * | gui | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Vol-| Vol+| Mute|Pause| | + * |-------------------------------------------------------------------------------------------------------------------------------------| + * | esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | ~ |backspc| | PgUp| Home| |NumLk| / | * | - | + * |-------------------------------------------------------------------------------------------------------------------------------------| + * | tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | enter | PgDn| End| | 7 | 8 | 9 | += | + * |-------------------------------------------------------------------------------- |--------------------------------------| + * | ctrl | A | S | D | F | G | H | J | K | L | ;: | '" | |\ | | Del |NumLk| | 4 | 5 | 6 | + | + * |-------------------------------------------------------------------------------------------------------------------------------------| + * | shift | Z | X | C | V | B | N | M | , | . | /? | [] | shift | up | down| | 1 | 2 | 3 |enter| + * |-------------------------------------------------------------------------------------------------------------------------------| | + * | | caps | alt | Space | Fn | | left|right| | 0 | . | | + * `-------------------------------------------------------------------------------------------------------------------------------------' +*/ + [0] = LAYOUT( + KC_LGUI, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_VOLD, KC_VOLU, KC_MUTE, KC_PSCR, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, KC_HOME, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, KC_PGDN, KC_END, KC_P7, KC_P8, KC_P9, KC_EQL, + KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_DEL, KC_NLCK, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MC1, KC_RSFT, KC_UP, KC_DOWN, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_CAPS, KC_LALT, KC_SPC, MO(1), KC_LEFT, KC_RGHT, KC_P0, KC_PDOT + ), +/* + * ,-------------------------------------------------------------------------------------------------------------------------------------. + * | VRSN| |Sleep| |Umode| | | | | | | | | | | | | | | + * |-------------------------------------------------------------------------------------------------------------------------------------| + * | | | @ | # | $ | § | ^ | & | * | | | | | | | | | | |Calc | | | | + * |-------------------------------------------------------------------------------------------------------------------------------------| + * | | mb1 | m↑ | mb2 | mb3 | | | |SysRq|ScrLk|Pause| | | | | | | | | | | + * |-------------------------------------------------------------------------------- |--------------------------------------| + * | | m← | m↓ | m→ | mb5 | | | | | | | | | | | | | | | | | + * |-------------------------------------------------------------------------------------------------------------------------------------| + * | | | | mb4 | | | | | | | | | | | | | | | | | + * |-------------------------------------------------------------------------------------------------------------------------------| | + * | | | | | | | | | | | | | + * `-------------------------------------------------------------------------------------------------------------------------------------' +*/ + [1] = LAYOUT( + VRSN, KC_SLEP, _______, UC_MOD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, X(UAT), X(UHSH), X(UDLR), X(USCT), X(UCFX), X(UAMP), X(UAST), _______, _______, _______, _______, _______, _______, _______, _______, KC_CALC, _______, _______, _______, + _______, KC_BTN1, KC_MS_U, KC_BTN2, KC_BTN3, _______, _______, _______, KC_SYSREQ, KC_SLCK, KC_PAUS, XP(ULSB, ULCB), XP(URSB, URCB), _______, _______, _______, _______, _______, _______, _______, + _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN5, _______, _______, _______, _______, _______, XP(USCO, UCLN), XP(UAPO, UQOT), _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, KC_BTN4, _______, _______, _______, _______, XP(UCOM, ULTH), XP(UDOT, UGTH), XP(USLS, UQUE), KC_APP, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case VRSN: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + return false; + break; + + case MC1: + if (record->event.pressed) { + send_unicode_string("[]"); + } + return false; + break; + } + return true; +} diff --git a/keyboards/handwired/t111/keymaps/oleg/rules.mk b/keyboards/handwired/t111/keymaps/oleg/rules.mk new file mode 100644 index 000000000000..0517619ed13f --- /dev/null +++ b/keyboards/handwired/t111/keymaps/oleg/rules.mk @@ -0,0 +1 @@ +UNICODEMAP_ENABLE = yes \ No newline at end of file diff --git a/keyboards/handwired/t111/mcuconf.h b/keyboards/handwired/t111/mcuconf.h new file mode 100644 index 000000000000..60d9931c3536 --- /dev/null +++ b/keyboards/handwired/t111/mcuconf.h @@ -0,0 +1,209 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define STM32F103_MCUCONF + +/* + * STM32F103 drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED FALSE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_RTCSEL STM32_RTCSEL_HSEDIV +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 TRUE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * RTC driver system settings. + */ +#define STM32_RTC_IRQ_PRIORITY 15 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 TRUE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 + +#endif /* _MCUCONF_H_ */ \ No newline at end of file diff --git a/keyboards/handwired/t111/readme.md b/keyboards/handwired/t111/readme.md new file mode 100644 index 000000000000..31bbc2a728dc --- /dev/null +++ b/keyboards/handwired/t111/readme.md @@ -0,0 +1,45 @@ +# QMK-based firmware for Fujitsu N860-2500-T111 keyboard + +![Fujitsu T111](https://i.imgur.com/aGtg7FMl.jpg) + +Fujitsu N860-2500-T111 keyboard conversion project: direct connection of Black Pill to the matrix. + +* Keyboard Maintainer: [DmNosachev](https://github.com/DmNosachev) +* Hardware Supported: [Fujitsu N860-2500-T111](https://deskthority.net/viewtopic.php?t=17087), Black Pill STM32F103C8T6 MCU board. Alternatively you can use any MCU which is supported by QMK and has 22 or more IO pins: Arduino Micro, Teensy 2.0, Teensy 2.0++, Blue Pill, etc. +* Thanks to Deskthority user *OldIsNew* for the matrix decoding. + +Make example for this keyboard (after setting up your build environment): + + make handwired/t111:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +# Modding + +## Matrix + +Fujitsu N860-2500-T111 has 14x8 matrix. It's ghost-free thanks to the diodes. + +Rows (0-7) and columns (0-D): +![T111 rows and columns](https://i.imgur.com/37MxQG8h.jpg) + +## Black Pill +Suggested mount position for the Black Pill (view from the top side of the PCB): + +``` + C1 C2 C3 C4 C7 C8 C9 CA R5 R6 +,--------------------------------------------------------------------, +|B11 B10 B1 B0 A7 A6 A5 A4 A3 A2 A1 A0 RST C13 B9 B8 GND |---, +| |USB| +|B12 B13 B14 B15 A8 A9 A10 A11 A12 A15 B3 B4 B5 B6 B7 3V3 GND |---' +'--------------------------------------------------------------------' + CC CD C0 CB C6 C5 R0 R4 R3 R2 R1 R7 +``` + +![Black Pill](https://i.imgur.com/lJfdAQTh.jpg) + +1. Desolder all ICs, capacitors and resistors. +1. Solder 4-pin SWD header to Black Pill. +2. Burn [STM32duino bootloader](https://github.com/rogerclarkmelbourne/STM32duino-bootloader/blob/master/bootloader_only_binaries/generic_boot20_pb12.bin) to Black Pill. +3. Compile and flash the firmware: `make handwired/t111:default:flash` +4. Connect rows and columns to the corresponding pins of the Black Pill. diff --git a/keyboards/handwired/t111/rules.mk b/keyboards/handwired/t111/rules.mk new file mode 100644 index 000000000000..e6776a643cbd --- /dev/null +++ b/keyboards/handwired/t111/rules.mk @@ -0,0 +1,29 @@ +MCU = STM32F103 + +# GENERIC STM32F103C8T6 board - stm32duino bootloader +MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader +BOARD = STM32_F103_STM32DUINO +STM32_BOOTLOADER_ADDRESS = 0x80000000 + +DFU_ARGS = -d 1EAF:0003 -a2 -R +DFU_SUFFIX_ARGS = -v 1EAF -p 0003 + +# Enter lower-power sleep mode when on the ChibiOS idle thread +OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/t111/t111.c b/keyboards/handwired/t111/t111.c new file mode 100644 index 000000000000..f61e34240e26 --- /dev/null +++ b/keyboards/handwired/t111/t111.c @@ -0,0 +1,17 @@ +/* Copyright 2020 DmNosachev + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "t111.h" diff --git a/keyboards/handwired/t111/t111.h b/keyboards/handwired/t111/t111.h new file mode 100644 index 000000000000..35651f635db3 --- /dev/null +++ b/keyboards/handwired/t111/t111.h @@ -0,0 +1,57 @@ +/* Copyright 2020 DmNosachev + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define XXX KC_NO + +/* +,-------------------------------------------------------------------------------------------------------------------------------------. +|break| | PF1 | PF2 | PF3 | PF4 | PF5 | PF6 | PF7 | PF8 | PF9 | PF10| PF11| PF12| PF13| PF14| PF15| PF16| | +|-------------------------------------------------------------------------------------------------------------------------------------| +| esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | ~ |backspc| | ins | cls | | * | / | + | - | +|-------------------------------------------------------------------------------------------------------------------------------------| +| tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | enter | el | dup | | 7 | 8 | 9 | = | +|-------------------------------------------------------------------------------- |--------------------------------------| +| ctrl | A | S | D | F | G | H | J | K | L | ;: | '" | |\ | | del | home| | 4 | 5 | 6 | , | +|-------------------------------------------------------------------------------------------------------------------------------------| +| shift | Z | X | C | V | B | N | M | , | . | /? |blank| shift | up | down| | 1 | 2 | 3 |enter| +|-------------------------------------------------------------------------------------------------------------------------------| | +| | caps| graph | Space | alt | | left|right| | 0 | . | | +`-------------------------------------------------------------------------------------------------------------------------------------' +*/ + +#define LAYOUT( \ + K30, K40, K11, K21, K31, K41, K51, K61, K71, K01, K12, K22, K32, K42, K52, K62, K72, \ + K20, K13, K23, K33, K43, K53, K63, K73, K03, K14, K24, K34, K44, K54, K58, K64, K74, K15, K06, K76, K66, \ + K10, K17, K27, K37, K47, K57, K67, K77, K07, K18, K28, K38, K48, K68, K78, K1B, K00, K70, K60, \ + K0A, K19, K29, K39, K49, K59, K69, K79, K09, K1A, K2A, K3A, K4A, K5A, K6A, K7A, K2B, K3B, K4B, K5B, \ + K0D, K1C, K2C, K3C, K4C, K5C, K6C, K7C, K0C, K1D, K2D, K3D, K04, K6D, K7D, K25, K35, K45, K55, \ + K08, K0B, K50, K05, K6B, K7B, K65, K75 \ +) \ +{ \ +/* 0 */ { K00, K01, XXX, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ +/* 1 */ { K10, K11, K12, K13, K14, K15, XXX, K17, K18, K19, K1A, K1B, K1C, K1D }, \ +/* 2 */ { K20, K21, K22, K23, K24, K25, XXX, K27, K28, K29, K2A, K2B, K2C, K2D }, \ +/* 3 */ { K30, K31, K32, K33, K34, K35, XXX, K37, K38, K39, K3A, K3B, K3C, K3D }, \ +/* 4 */ { K40, K41, K42, K43, K44, K45, XXX, K47, K48, K49, K4A, K4B, K4C, XXX }, \ +/* 5 */ { K50, K51, K52, K53, K54, K55, XXX, K57, K58, K59, K5A, K5B, K5C, XXX }, \ +/* 6 */ { K60, K61, K62, K63, K64, K65, K66, K67, K68, K69, K6A, K6B, K6C, K6D }, \ +/* 7 */ { K70, K71, K72, K73, K74, K75, K76, K77, K78, K79, K7A, K7B, K7C, K7D } \ +} +/* 0 1 2 3 4 5 6 7 8 9 A B C D */ diff --git a/keyboards/helix/local_drivers/ssd1306.c b/keyboards/helix/local_drivers/ssd1306.c index 00b2fb0eec36..c6fc4b78544f 100644 --- a/keyboards/helix/local_drivers/ssd1306.c +++ b/keyboards/helix/local_drivers/ssd1306.c @@ -16,6 +16,8 @@ #include "sendchar.h" #include "timer.h" +struct CharacterMatrix display; + // Set this to 1 to help diagnose early startup problems // when testing power-on with ble. Turn it off otherwise, // as the latency of printing most of the debug info messes diff --git a/keyboards/helix/local_drivers/ssd1306.h b/keyboards/helix/local_drivers/ssd1306.h index f9f91c6fedf5..bcb30f88595d 100644 --- a/keyboards/helix/local_drivers/ssd1306.h +++ b/keyboards/helix/local_drivers/ssd1306.h @@ -66,7 +66,7 @@ struct CharacterMatrix { bool dirty; }; -struct CharacterMatrix display; +extern struct CharacterMatrix display; bool iota_gfx_init(bool rotate); void iota_gfx_task(void); diff --git a/keyboards/hub16/keymaps/ahk_companion/ahk_companion.ahk b/keyboards/hub16/keymaps/ahk_companion/ahk_companion.ahk new file mode 100644 index 000000000000..becab49e5cc5 --- /dev/null +++ b/keyboards/hub16/keymaps/ahk_companion/ahk_companion.ahk @@ -0,0 +1,104 @@ +#Persistent +#SingleInstance force + +;================================================================= +; Macro Pad Shortcuts ; +;================================================================= + +;================================================================= +; Layer 0 +;;================================================================= +;Row 1 + +F13::Send a +F14::Send b +F15::Send c +F16::Send d + +;Row 2 + +F17::Send e +F18::Send f +F19::Send g +F20::Send h + +;Row 3 + +F21::Send i +F22::Send j +F23::Send k +F24::Send l + + +;================================================================= +; Layer 1 +;;================================================================= +;Row 1 + +!F13::Send m +!F14::Send n +!F15::Send o +!F16::Send p + +;Row 2 + +!F17::Send q +!F18::Send r +!F19::Send s +!F20::Send t + +;Row 3 + +!F21::Send u +!F22::Send v +!F23::Send w +!F24::Send x + + +;================================================================= +; Layer 2 +;;================================================================= +;Row 1 + ++F13::Send y ++F14::Send z ++F15::Send A ++F16::Send B + +;Row 2 + ++F17::Send C ++F18::Send D ++F19::Send E ++F20::Send F + +;Row 3 + ++F21::Send G ++F22::Send H ++F23::Send I ++F24::Send J + +;================================================================= +; Layer 3 +;;================================================================= +;Row 1 + +^F13::Send K +^F14::Send L +^F15::Send M +^F16::Send N + +;Row 2 + +^F17::Send O +^F18::Send P +^F19::Send Q +^F20::Send R + +;Row 3 + +^F21::Send S +^F22::Send T +^F23::Send U +^F24::Send V diff --git a/keyboards/hub16/keymaps/ahk_companion/config.h b/keyboards/hub16/keymaps/ahk_companion/config.h new file mode 100644 index 000000000000..aa9e081c7560 --- /dev/null +++ b/keyboards/hub16/keymaps/ahk_companion/config.h @@ -0,0 +1,57 @@ +/* +Copyright 2019 Josh Johnson + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 20 + +// Time out one shot layers after 3 seconds +#define ONESHOT_TIMEOUT 3000 + +// Undef and redefine default brightness to half of 255 +#undef RGBLIGHT_LIMIT_VAL +#define RGBLIGHT_LIMIT_VAL 255 + +//Define a preview timeout for RGB reviews +#define PREVIEW_TIMEOUT 5000 + +// Enable Light Layers implementation +#define RGBLIGHT_LAYERS +// Allow Light Layers to override RGB off configuration +#define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF diff --git a/keyboards/hub16/keymaps/ahk_companion/keymap.c b/keyboards/hub16/keymaps/ahk_companion/keymap.c new file mode 100644 index 000000000000..bbc2ac09a112 --- /dev/null +++ b/keyboards/hub16/keymaps/ahk_companion/keymap.c @@ -0,0 +1,168 @@ +/* +Copyright 2019 Josh Johnson + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_LAYERS) +static uint32_t rgb_preview_timer = 0; +#endif + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + //Layer 0 - Base Layer (F13 to F24, and One Shot Layer 1,2,3 or Toggle Layer 4) + [0] = LAYOUT( + KC_MPLY, KC_MUTE, + KC_F13, KC_F14, KC_F15, KC_F16, + KC_F17, KC_F18, KC_F19, KC_F20, + KC_F21, KC_F22, KC_F23, KC_F24, + OSL(1), OSL(2), OSL(3), TG(4) //Transparent to let you go between layers + ), + + [1] = LAYOUT( + KC_MPLY, KC_MUTE, + LALT(KC_F13), LALT(KC_F14), LALT(KC_F15), LALT(KC_F16), + LALT(KC_F17), LALT(KC_F18), LALT(KC_F19), LALT(KC_F20), + LALT(KC_F21), LALT(KC_F22), LALT(KC_F23), LALT(KC_F24), + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS //Transparent to let you go between layers + ), + + //Layer 2 - Shift + Function Key Layer + [2] = LAYOUT( + KC_MPLY, KC_MUTE, + LSFT(KC_F13), LSFT(KC_F14), LSFT(KC_F15), LSFT(KC_F16), + LSFT(KC_F17), LSFT(KC_F18), LSFT(KC_F19), LSFT(KC_F20), + LSFT(KC_F21), LSFT(KC_F22), LSFT(KC_F23), LSFT(KC_F24), + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS //Transparent to let you go between layers + ), + + //Layer 3 - Control + Function Key + [3] = LAYOUT( + KC_MPLY, KC_MUTE, + LCTL(KC_F13), LCTL(KC_F14), LCTL(KC_F15), LCTL(KC_F16), + LCTL(KC_F17), LCTL(KC_F18), LCTL(KC_F19), LCTL(KC_F20), + LCTL(KC_F21), LCTL(KC_F22), LCTL(KC_F23), LCTL(KC_F24), + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS //Transparent to let you go between layers + ), + + //Layer 4 - Multimedia + [4] = LAYOUT( + KC_MPLY, KC_MUTE, + KC_MPRV, KC_MPLY, KC_U, KC_K, + KC_NO, KC_NO, KC_ENT, KC_X, + KC_NO, RESET, LSFT(KC_HASH), KC_J, + TG(5), KC_TRNS, KC_TRNS, KC_TRNS //Transparent to let you go between layers + ), + + //Layer 5 - Keyboard Lights, Programming and Special Functions + [5] = LAYOUT( + KC_MPLY, KC_MUTE, + RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, + RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD, + RGB_TOG, EEP_RST, RESET, KC_LSHIFT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS //Transparent to let you go between layers + ), +}; + +const rgblight_segment_t PROGMEM my_layer0_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {0,16,HSV_ORANGE} + ); +const rgblight_segment_t PROGMEM my_layer1_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {0,16,HSV_GREEN} + ); +const rgblight_segment_t PROGMEM my_layer2_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {0,16,HSV_RED} + ); +const rgblight_segment_t PROGMEM my_layer3_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {0,16,HSV_BLUE} + ); +const rgblight_segment_t PROGMEM my_layer4_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {0,16,HSV_WHITE} + ); +const rgblight_segment_t PROGMEM my_layer5_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {0,16,HSV_TEAL} + ); +const rgblight_segment_t* const PROGMEM my_rgb_layers[] = RGBLIGHT_LAYERS_LIST( + my_layer0_layer, + my_layer1_layer, + my_layer2_layer, + my_layer3_layer, + my_layer4_layer, + my_layer5_layer + ); + +void encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { /* Left Encoder */ + if (clockwise) { + tap_code(KC_MPRV); + } else { + tap_code(KC_MNXT); + } + } else if (index == 1) { /* Right Encoder */ + if (clockwise) { + tap_code(KC_VOLD); + } else { + tap_code(KC_VOLU); + } + } +} +void post_process_record_user(uint16_t keycode, keyrecord_t *record) { + // Allow for a preview of changes when modifying RGB +# if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_LAYERS) + switch (keycode) { + case RGB_TOG ... VLK_TOG: + for (uint8_t i = 0; i < RGBLIGHT_MAX_LAYERS; i++) { + rgblight_set_layer_state(i, false); + } + rgb_preview_timer = timer_read32(); + break; + } +# endif + return; +} + +//Set the appropriate layer color +layer_state_t layer_state_set_user(layer_state_t state) { + rgblight_set_layer_state(1, layer_state_cmp(state, 1)); + rgblight_set_layer_state(2, layer_state_cmp(state, 2)); + rgblight_set_layer_state(3, layer_state_cmp(state, 3)); + rgblight_set_layer_state(4, layer_state_cmp(state, 4)); + rgblight_set_layer_state(5, layer_state_cmp(state, 5)); + return state; +} + +void keyboard_post_init_user(void) { + //Enable the LED layers + rgblight_layers = my_rgb_layers; + layer_state_set_user(layer_state); +} + +void matrix_scan_user(void) { +# if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_LAYERS) + // Allow preview for + if (rgb_preview_timer && TIMER_DIFF_32(timer_read32(), rgb_preview_timer) > PREVIEW_TIMEOUT) { + rgb_preview_timer = 0; + default_layer_state_set_user(default_layer_state); + layer_state_set_user(layer_state); + led_update_user((led_t) host_keyboard_leds()); + } +# endif +} + +//EEPROM Reset Function +void eeconfig_init_user(void) { + rgblight_enable(); // Enable RGB by default + rgblight_sethsv_orange(); // Set it to orange by default +} diff --git a/keyboards/hub16/keymaps/ahk_companion/readme.md b/keyboards/hub16/keymaps/ahk_companion/readme.md new file mode 100644 index 000000000000..6e8f9f2d2a25 --- /dev/null +++ b/keyboards/hub16/keymaps/ahk_companion/readme.md @@ -0,0 +1,71 @@ +# AutoHotKey Companion + +## Overview +AutoHotKey Companion Keymap for Hub16 macropad is designed be a quick and easy way to get started with AutoHotKey and to provide a foundation for customizing your own macropad. I upgraded to the Super16 from a Super16 because it kept the RGB underglow lights for an easy way (RGB) to identify what layer I was on with a quick glance or peripheral vision and added 2 rotary encoders and a USB 2.0 hub with USB-C ports. The F13 to F24 keys were selected as they are rarely used so you won't run into conflicts with existing application shortcuts and AutoHotKey recognizes them without any issues. *Note:* MacOS does not support/recognize F21 to F24 so these would need to be remapped for Mac users. + +Same functionality can be accomplished with other similar applications on the host system like Keyboard Maestro, AutoIt, etc. + +* AutoHotKey(Windows) +* AutoIT (Windows) +* Keyboard Maestro(Mac) +* AutoKey(Linux) + +This keymap allows for a total of 48 Function/Macro keys that are accessible within 2 sequential key presses (or more when extended with your own code and additional layers) + +## Encoders +Encoder functionality was made based on my needs but it can be remapped as desired by changing the keycodes. + +Left Encoder: + * Counter clockwise: Previous Multimedia + * Clockwise: Next Multimedia + * Click: Play/Pause + + Right Encoder: + * Counter clockwise: Volume Down + * Clockwise: Volume Up + * Click: Mute/Unmute + +## Alternate Implementations +I chose to use QMK OSL (One Shot Layer) functionality to avoid having to hold a key while selecting the next key and to have my layers always go back to the default layer as the starting point. This also helps me avoid having to cognitively remember what layer I am on. + +If persistent behavior is prefered, OSL can be swapped for TG which will toggle the layer on/off with a key press instead of clearing the layer once the Function key is pressed. This is useful if a layer contains several keys that need to be used in sequence. I also added a OSL timeout of 3 seconds, so that if the key is not pressed within 3 seconds the layer will go back to default. This can be adjusted in the config.h file by increasing 3000 to a desired value: `#define ONESHOT_TIMEOUT 3000` + + + + +## Layers + +While the first 5 layers are accessible with only 1 key press at most, the 5th (less frequently used) layer is accessed by first going to the 4th layer, which makes the TG(5) button available on the bottom left. Space for additional 2 more layer toggles is available on the 2 middle buttons on the bottom row. Please refer to the layer diagrams. + + +* Layer 0 (Base Layer) - the default layer and functions like sending the F13 to F24 keys along with the bottom row to activate another 4 layers. + + ![Image of Base Layer ](https://i.imgur.com/0LhityX.png) + +* Layer 1 (Alt Layer) - Equivalent to Alt+Fxx key being pressed + + ![Image of Layer 1 ](https://i.imgur.com/ZblqLZt.png) + +* Layer 2 (Shift Layer) - Equivalent to Shift+Fxx key being pressed + + ![Image of Layer 2 ](https://i.imgur.com/ZQHwLC0.png) + +* Layer 3 (Control Layer) - Equivalent to Ctrl+Fxx key being pressed + + ![Image of Layer 3 ](https://i.imgur.com/JkM8bqV.png) + +* Layer 4 (Config Layer) - Layer for multimedia. You can replace the KC_TRNS on this layer in keymap.c to TG(x) to enable additional layers. + + ![Image of Layer 4 ](https://i.imgur.com/srDp5Lv.png) + +* Layer 5 (RGB Control/QMK) - RGB control layer and Quantum functions (Reset, EEPROM Reset, ) + + ![Image of Layer 5 ](https://i.imgur.com/Os3n8dx.png) + +## Host Configuration + +Once the keymap has been flashed to the Super16, you can download the accompanying AutoHotKey file or create your own and have it start automatically either via a Windows Task or another way. Using AutoHotKey allows adjustment of functionality of the buttons without the need to change your map and reflash the macropad every time. +Starting the AHK file can be done either by: +* Creating a Windows Task +* Adding the AHK to the startup folder +* Launch manually diff --git a/keyboards/hub16/keymaps/ahk_companion/rules.mk b/keyboards/hub16/keymaps/ahk_companion/rules.mk new file mode 100755 index 000000000000..022a3eeeed0d --- /dev/null +++ b/keyboards/hub16/keymaps/ahk_companion/rules.mk @@ -0,0 +1,3 @@ +TAP_DANCE_ENABLE = no # Support for tap dancing + + diff --git a/keyboards/katana60/info.json b/keyboards/katana60/info.json deleted file mode 100644 index bbb868103495..000000000000 --- a/keyboards/katana60/info.json +++ /dev/null @@ -1,13 +0,0 @@ -{ - "keyboard_name": "Katana60", - "url": "", - "maintainer": "qmk", - "width": 15, - "height": 5, - "layouts": { - "LAYOUT": { - "key_count": 70, - "layout": [{"label":"k40", "x":0, "y":0}, {"label":"k41", "x":1, "y":0}, {"label":"k42", "x":2, "y":0}, {"label":"k43", "x":3, "y":0}, {"label":"k44", "x":4, "y":0}, {"label":"k45", "x":5, "y":0}, {"label":"k46", "x":6, "y":0}, {"label":"k47", "x":7, "y":0}, {"label":"k48", "x":8, "y":0}, {"label":"k49", "x":9, "y":0}, {"label":"k4a", "x":10, "y":0}, {"label":"k4b", "x":11, "y":0}, {"label":"k4c", "x":12, "y":0}, {"label":"k4d", "x":13, "y":0}, {"label":"k4e", "x":14, "y":0}, {"label":"k30", "x":0, "y":1, "w":1.5}, {"label":"k31", "x":1.5, "y":1}, {"label":"k32", "x":2.5, "y":1}, {"label":"k33", "x":3.5, "y":1}, {"label":"k34", "x":4.5, "y":1}, {"label":"k35", "x":5.5, "y":1}, {"label":"k36", "x":6.5, "y":1}, {"label":"k37", "x":7.5, "y":1}, {"label":"k38", "x":8.5, "y":1}, {"label":"k39", "x":9.5, "y":1}, {"label":"k3a", "x":10.5, "y":1}, {"label":"k3b", "x":11.5, "y":1}, {"label":"k3c", "x":12.5, "y":1}, {"label":"k3d", "x":13.5, "y":1, "w":1.5}, {"label":"k20", "x":0, "y":2, "w":1.25}, {"label":"k21", "x":1.25, "y":2}, {"label":"k22", "x":2.25, "y":2}, {"label":"k23", "x":3.25, "y":2}, {"label":"k24", "x":4.25, "y":2}, {"label":"k25", "x":5.25, "y":2}, {"label":"k26", "x":6.25, "y":2}, {"label":"k27", "x":7.75, "y":2}, {"label":"k28", "x":8.75, "y":2}, {"label":"k29", "x":9.75, "y":2}, {"label":"k2a", "x":10.75, "y":2}, {"label":"k2b", "x":11.75, "y":2}, {"label":"k2c", "x":12.75, "y":2}, {"label":"k2d", "x":13.75, "y":2, "w":1.25}, {"label":"k10", "x":0, "y":3}, {"label":"k11", "x":1, "y":3}, {"label":"k12", "x":2, "y":3}, {"label":"k13", "x":3, "y":3}, {"label":"k14", "x":4, "y":3}, {"label":"k15", "x":5, "y":3}, {"label":"k16", "x":6, "y":3}, {"label":"k17", "x":7, "y":3}, {"label":"k18", "x":8, "y":3}, {"label":"k19", "x":9, "y":3}, {"label":"k1a", "x":10, "y":3}, {"label":"k1b", "x":11, "y":3}, {"label":"k1c", "x":12, "y":3}, {"label":"k1d", "x":13, "y":3}, {"label":"k1e", "x":14, "y":3}, {"label":"k00", "x":0, "y":4}, {"label":"k01", "x":1, "y":4, "w":1.25}, {"label":"k02", "x":2.25, "y":4, "w":1.25}, {"label":"k03", "x":3.5, "y":4, "w":1.25}, {"label":"k04", "x":4.75, "y":4, "w":2.25}, {"label":"k05", "x":7, "y":4}, {"label":"k06", "x":8, "y":4, "w":2}, {"label":"k09", "x":10, "y":4}, {"label":"k0a", "x":11, "y":4}, {"label":"k0b", "x":12, "y":4}, {"label":"k0c", "x":13, "y":4}, {"label":"k0d", "x":14, "y":4}] - } - } -} diff --git a/keyboards/katana60/readme.md b/keyboards/katana60/readme.md deleted file mode 100644 index 5e1c7d39060c..000000000000 --- a/keyboards/katana60/readme.md +++ /dev/null @@ -1,17 +0,0 @@ -# Katana60 - -![Katana60](https://i.imgur.com/xVkODOu.jpg) - -A 60% keyboard with a symmetrical staggered layout, sold by CandyKeys.com. - -Keyboard Maintainer: [Baris Tosun](https://github.com/rominronin) -Hardware Supported: Katana60 PCB v1, Teensy 2.0 -Hardware Availability: [CandyKeys.com](https://CandyKeys.com) - -Make example for this keyboard (after setting up your build environment): - - make katana60:default - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. - -There is also ongoing discussion for the extend layer, at the [Colemak Forum](https://forum.colemak.com/topic/2327-developing-an-extend-layer-for-the-katana60/) \ No newline at end of file diff --git a/keyboards/kbdfans/bella/soldered/config.h b/keyboards/kbdfans/bella/soldered/config.h new file mode 100755 index 000000000000..0d729bebe8f8 --- /dev/null +++ b/keyboards/kbdfans/bella/soldered/config.h @@ -0,0 +1,42 @@ +/* Copyright 2020 dztech + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4B42 +#define PRODUCT_ID 0x0007 +#define DEVICE_VER 0x0001 +#define MANUFACTURER KBDFANS +#define PRODUCT BELLA SOLDERED +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 16 + +#define MATRIX_ROW_PINS { B0, B1, B2, B3, D1, B6 } +#define MATRIX_COL_PINS { C6, C7, F7, F6, F5, F4, F1, F0, D2, D3, D5, D4, D6, D7, B4, B5 } +#define UNUSED_PINS + +#define DIODE_DIRECTION COL2ROW + +#define BACKLIGHT_PIN B7 +#ifdef BACKLIGHT_PIN +#define BACKLIGHT_LEVELS 3 +#endif + +#define DEBOUNCE 5 +#define LOCKING_SUPPORT_ENABLE +#define LOCKING_RESYNC_ENABLE diff --git a/keyboards/kbdfans/bella/soldered/info.json b/keyboards/kbdfans/bella/soldered/info.json new file mode 100644 index 000000000000..c031c117d84d --- /dev/null +++ b/keyboards/kbdfans/bella/soldered/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "bella_soldered", + "url": "", + "maintainer": "kbdfans", + "width": 16.25, + "height": 6.5, + "layouts": { + "LAYOUT_all": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"x":15.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"x":13, "y":1.5}, {"label":"Backspace", "x":14, "y":1.5}, {"x":15.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"x":15.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"x":15.25, "y":3.5}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, {"label":"\u2191", "x":14.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Alt", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.5}, {"label":"Win", "x":11.5, "y":5.5, "w":1.5}, {"label":"\u2190", "x":13.25, "y":5.5}, {"label":"\u2193", "x":14.25, "y":5.5}, {"label":"\u2192", "x":15.25, "y":5.5}] + } + } +} diff --git a/keyboards/kbdfans/bella/soldered/keymaps/default/keymap.c b/keyboards/kbdfans/bella/soldered/keymaps/default/keymap.c new file mode 100755 index 000000000000..fc93b5ded1a0 --- /dev/null +++ b/keyboards/kbdfans/bella/soldered/keymaps/default/keymap.c @@ -0,0 +1,36 @@ +/* Copyright 2020 dztech + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PGUP, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LALT, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + + LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) + +}; diff --git a/keyboards/kbdfans/bella/soldered/keymaps/via/keymap.c b/keyboards/kbdfans/bella/soldered/keymaps/via/keymap.c new file mode 100755 index 000000000000..b9c77ce91194 --- /dev/null +++ b/keyboards/kbdfans/bella/soldered/keymaps/via/keymap.c @@ -0,0 +1,51 @@ +/* Copyright 2020 dztech + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PGUP, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LALT, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + + LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; diff --git a/keyboards/kbdfans/bella/soldered/keymaps/via/rules.mk b/keyboards/kbdfans/bella/soldered/keymaps/via/rules.mk new file mode 100644 index 000000000000..36b7ba9cbc98 --- /dev/null +++ b/keyboards/kbdfans/bella/soldered/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/kbdfans/bella/soldered/rules.mk b/keyboards/kbdfans/bella/soldered/rules.mk new file mode 100755 index 000000000000..b0ed9e41e578 --- /dev/null +++ b/keyboards/kbdfans/bella/soldered/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/katana60/katana60.c b/keyboards/kbdfans/bella/soldered/soldered.c old mode 100644 new mode 100755 similarity index 51% rename from keyboards/katana60/katana60.c rename to keyboards/kbdfans/bella/soldered/soldered.c index e8d4fef1936d..602543af2b23 --- a/keyboards/katana60/katana60.c +++ b/keyboards/kbdfans/bella/soldered/soldered.c @@ -1,4 +1,4 @@ -/* Copyright 2017 Baris Tosun +/* Copyright 2020 dztech * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -13,31 +13,16 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#include "katana60.h" - +#include "soldered.h" void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); + setPinOutput(E6); + matrix_init_user(); } -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); +bool led_update_kb(led_t led_state) { + bool res = led_update_user(led_state); + if(res) { + writePin(E6, !led_state.caps_lock); + } + return res; } diff --git a/keyboards/kbdfans/bella/soldered/soldered.h b/keyboards/kbdfans/bella/soldered/soldered.h new file mode 100755 index 000000000000..cebfc1bc6107 --- /dev/null +++ b/keyboards/kbdfans/bella/soldered/soldered.h @@ -0,0 +1,34 @@ +/* Copyright 2020 dztech + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +#define LAYOUT_all( \ + K000, K002, K003, K004, K005, K006, K007, K008, K009, K011, K012, K013, K014, K015, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K315, \ + K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K414, \ + K500, K501, K502, K506, K510, K511, K513, K514, K515 \ +) { \ + { K000, KC_NO, K002, K003, K004, K005, K006, K007, K008, K009, KC_NO, K011, K012, K013, K014, K015 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO, K215 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, KC_NO, K315 }, \ + { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO, K414, KC_NO }, \ + { K500, K501, K502, KC_NO, KC_NO, KC_NO, K506, KC_NO, KC_NO, KC_NO, K510, K511, KC_NO, K513, K514, K515 } \ +} diff --git a/keyboards/kbdfans/kbd67/mkii_soldered/info.json b/keyboards/kbdfans/kbd67/mkii_soldered/info.json index 72c851e35af9..cb012517aa39 100644 --- a/keyboards/kbdfans/kbd67/mkii_soldered/info.json +++ b/keyboards/kbdfans/kbd67/mkii_soldered/info.json @@ -290,6 +290,78 @@ {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4} ] + }, + "LAYOUT_65_iso_blocker_split_bs": { + "layout": [{"label":"Esc", "x":0, "y":0}, + {"label":"!", "x":1, "y":0}, + {"label":"@", "x":2, "y":0}, + {"label":"#", "x":3, "y":0}, + {"label":"$", "x":4, "y":0}, + {"label":"%", "x":5, "y":0}, + {"label":"^", "x":6, "y":0}, + {"label":"&", "x":7, "y":0}, + {"label":"*", "x":8, "y":0}, + {"label":"(", "x":9, "y":0}, + {"label":")", "x":10, "y":0}, + {"label":"_", "x":11, "y":0}, + {"label":"+", "x":12, "y":0}, + {"label":"|", "x":13, "y":0}, + {"label":"Del", "x":14, "y":0}, + {"label":"Home", "x":15, "y":0}, + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"{", "x":11.5, "y":1}, + {"label":"}", "x":12.5, "y":1}, + {"label":"End", "x":15, "y":1}, + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":":", "x":10.75, "y":2}, + {"label":"\"", "x":11.75, "y":2}, + {"label":"~", "x":12.75, "y":2}, + {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, + {"label":"PgUp", "x":15, "y":2}, + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"|", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":"<", "x":9.25, "y":3}, + {"label":">", "x":10.25, "y":3}, + {"label":"?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"\u2191", "x":14, "y":3}, + {"label":"PgDn", "x":15, "y":3}, + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Ctrl", "x":11.25, "y":4, "w":1.25}, + {"label":"\u2190", "x":13, "y":4}, + {"label":"\u2193", "x":14, "y":4}, + {"label":"\u2192", "x":15, "y":4} + ] } } } diff --git a/keyboards/kbdfans/kbd67/mkii_soldered/keymaps/king/keymap.c b/keyboards/kbdfans/kbd67/mkii_soldered/keymaps/king/keymap.c new file mode 100644 index 000000000000..70e2237d3afc --- /dev/null +++ b/keyboards/kbdfans/kbd67/mkii_soldered/keymaps/king/keymap.c @@ -0,0 +1,65 @@ + /* Copyright 2020 King Wang Wong + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + + + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* 0: _QWERTY + * ┌─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬───────┬───────┬─────────┐ + * │ KC_ESC │ KC_1 │ KC_2 │ KC_3 │ KC_4 │ KC_5 │ KC_6 │ KC_7 │ KC_8 │ KC_9 │ KC_0 │ KC_MINS │ KC_EQL │ KC_GRV│ KC_INS│ KC_DEL │ + * ├─────────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬──┴───────┼─────────┤ + * │ KC_TAB │ KC_Q │ KC_W │ KC_E │ KC_R │ KC_T │ KC_Y │ KC_U │ KC_I │ KC_O │ KC_P │ KC_LBRC │ KC_RBRC │ KC_BSLS │ KC_PGUP │ + * ├──────────────┴─┬───────┴─┬───────┴─┬───────┴─┬───────┴─┬───────┴─┬───────┴─┬───────┴─┬───────┴─┬───────┴─┬───────┴─┬───────┴─┬───────┴──────────┼─────────┤ + * │ CTRL │ KC_A │ KC_S │ KC_D │ KC_F │ KC_G │ KC_H │ KC_J │ KC_K │ KC_L │ KC_SCLN │ KC_QUOT │ KC_ENT │ KC_PGDN │ + * ├────────────────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────────┬─────────┼─────────┤ + * │ KC_LSFT │ KC_Z │ KC_X │ KC_C │ KC_V │ KC_B │ KC_N │ KC_M │ KC_COMM │ KC_DOT │ KC_SLSH │ KC_RSFT │ KC_UP │ MO(1) │ + * ├───────────┬─────────┴─┬───────┴───┬─────┴─────────┴───────┬─┴─────────┼─────────┴─────────┴───────┬─┴───────┬─┴───────┬─┴───┬─────────┼─────────┼─────────┤ + * │ KC_LCTL │ KC_LGUI │ KC_LALT │ KC_SPC │ MO(1) │ KC_BSPC │ KC_RALT │ KC_RCTL │ │ KC_LEFT │ KC_DOWN │ KC_RGHT │ + * └───────────┴───────────┴───────────┴───────────────────────┴───────────┴───────────────────────────┴─────────┴─────────┴─────┴─────────┴─────────┴─────────┘ + */ + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_INS, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_BSPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + /* 1: _FN1 + * ┌─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬───────┬───────┬─────────┐ + * │ GRAVE │ KC_F1 │ KC_F2 │ KC_F3 │ KC_F4 │ KC_F5 │ KC_F6 │ KC_F7 │ KC_F8 │ KC_F9 │ KC_F10 │ KC_F11 │ KC_F12 │ ____│__ (2) │ RESET │ + * ├─────────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬──┴───────┼─────────┤ + * │ _______ │ _______ │ _______ │ _______ │ _______ │ _______ │ _______ │ _______ │ _______ │ _______ │ _______ │ _______ │ _______ │ _______ │ KC_VOLU │ + * ├──────────────┴─┬───────┴─┬───────┴─┬───────┴─┬───────┴─┬───────┴─┬───────┴─┬───────┴─┬───────┴─┬───────┴─┬───────┴─┬───────┴─┬───────┴──────────┼─────────┤ + * │ CAPS │ _______ │ _______ │ _______ │ _______ │ _______ │ _______ │ _______ │ _______ │ _______ │ _______ │ _______ │ _______ │ KC_VOLD │ + * ├────────────────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────────┬─────────┼─────────┤ + * │ _______ │ _______ │ _______ │ _______ │ _______ │ _______ │ _______ │ _______ │ _______ │ _______ │ _______ │ _______ │ _______ │ _______ │ + * ├───────────┬─────────┴─┬───────┴───┬─────┴─────────┴─────────┴─────────┴─────────┴─────────┴───────┬─┴───────┬─┴───────┬─┴───┬─────────┼─────────┼─────────┤ + * │ _______ │ _______ │ _______ │ _______ │ _______ │ _______ │ │ _______ │ _______ │ _______ │ + * └───────────┴───────────┴───────────┴───────────────────────────────────────────────────────────────┴─────────┴─────────┴─────┴─────────┴─────────┴─────────┘ + */ + [1] = LAYOUT_all( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_MUTE, + _______, _______, KC_HOME, KC_UP, KC_END, KC_PGUP, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, + KC_CAPS, _______, KC_LEFT, KC_DOWN, KC_RIGHT, KC_PGDN, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; \ No newline at end of file diff --git a/keyboards/kbdfans/kbd67/mkii_soldered/mkii_soldered.h b/keyboards/kbdfans/kbd67/mkii_soldered/mkii_soldered.h index 6b80aa20b6ba..48268d0be77e 100644 --- a/keyboards/kbdfans/kbd67/mkii_soldered/mkii_soldered.h +++ b/keyboards/kbdfans/kbd67/mkii_soldered/mkii_soldered.h @@ -74,14 +74,29 @@ #define LAYOUT_65_iso_blocker( \ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K114, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K113, K213, K214, \ K300, K404, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, \ K400, K401, K402, K405, K409, K410, K411, K413, K414 \ ) \ { \ { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO, K114 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, KC_NO, K213, K214 }, \ { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K314 }, \ { K400, K401, K402, KC_NO, K404, K405, KC_NO, KC_NO, KC_NO, K409, K410, K411, KC_NO, K413, K414 } \ } + +#define LAYOUT_65_iso_blocker_split_bs( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K212, K014, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K114, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K113, K213, K214, \ + K300, K404, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, \ + K400, K401, K402, K405, K409, K410, K411, K413, K414 \ +) \ +{ \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K314 }, \ + { K400, K401, K402, KC_NO, K404, K405, KC_NO, KC_NO, KC_NO, K409, K410, K411, KC_NO, K413, K414 } \ +} diff --git a/keyboards/kbdfans/kbd75/keymaps/ethan605/keymap.c b/keyboards/kbdfans/kbd75/keymaps/ethan605/keymap.c new file mode 100644 index 000000000000..4a987b9a900d --- /dev/null +++ b/keyboards/kbdfans/kbd75/keymaps/ethan605/keymap.c @@ -0,0 +1,67 @@ +/* Copyright 2020 @ethan605 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: Qwerty layer + * ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ + * │ ESC │ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │ INS │ DEL │ FN │ + * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┴─────┼─────┤ + * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ BSPC │HOME │ + * ├─────┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬────────┼─────┤ + * │ TAB │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ BSLS │END │ + * ├────────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴────────┼─────┤ + * │ LCTRL │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ ENTER │PGUP │ + * ├─────────┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴───────┬─────┼─────┤ + * │ LSHFT │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ RSHFT │ UP │PGDN │ + * ├──────┬─────┴─┬───┴──┬──┴─────┴─────┴─────┴─────┴─────┴────┬┴────┬┴────┬┴────┬─────┼─────┼─────┤ + * │ CAPS │ LALT │ LCMD │ SPC │RCMD │RALT │RCTL │LEFT │DOWN │RIGHT│ + * └──────┴───────┴──────┴─────────────────────────────────────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + [0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, MO(1), + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, KC_BSPC, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, MO(1), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_CAPS, KC_LALT, KC_LCMD, KC_SPC, KC_SPC, KC_SPC, KC_RCMD, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + /* 1: Function layer + * ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ FN │ + * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┴─────┼─────┤ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ RESET │ │ + * ├─────┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬────────┼─────┤ + * │ │ TOG │ MOD │ HU+ │ HU- │ SA+ │ SA- │ VA+ │ VA- │ │ │ │ │ │ │ // RGB controls + * ├────────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴────────┼─────┤ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + * ├─────────┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴───────┬─────┼─────┤ + * │ │ │ │ │ DEC │ TOG │ INC │STEP │ │ │ │ │ │ │ // Backlight controls + * ├──────┬─────┴─┬───┴──┬──┴─────┴─────┴─────┴─────┴─────┴────┬┴────┬┴────┬┴────┬─────┼─────┼─────┤ + * │ │ │ │ │ │ │ │ │ │ │ + * └──────┴───────┴──────┴─────────────────────────────────────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + [1] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, _______, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, BL_DEC, BL_TOGG, BL_INC, BL_STEP, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/keebio/iris/keymaps/dcompact/keymap.c b/keyboards/keebio/iris/keymaps/dcompact/keymap.c index ec1ffac8c18e..90e48c9c925a 100644 --- a/keyboards/keebio/iris/keymaps/dcompact/keymap.c +++ b/keyboards/keebio/iris/keymaps/dcompact/keymap.c @@ -9,6 +9,19 @@ #define WKSP_U LALT(LCTL(KC_UP)) #define WKSP_R LALT(LCTL(KC_RGHT)) +#define AM_CYC A(S(KC_SPC)) +#define AM_SHR A(S(KC_COMM)) +#define AM_GRW A(S(KC_DOT)) +#define AM_REL A(S(KC_Z)) +#define AM_LFT A(S(KC_H)) +#define AM_RGH A(S(KC_L)) +#define AM_CW A(S(KC_K)) +#define AM_CCW A(S(KC_J)) +#define AM_TLL A(S(KC_1)) +#define AM_TLW A(S(KC_2)) +#define AM_BSP A(S(KC_3)) +#define AM_FUL A(S(KC_4)) + enum custom_layers { _BASE, _LOWER, @@ -52,11 +65,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_LOWER] = LAYOUT( //┌────────┬────────┬────────┬────────┬────────┬────────┐ ┌────────┬────────┬────────┬────────┬────────┬────────┐ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_HOME, KC_PGDN, KC_PGUP, KC_END, XXXXXXX, + XXXXXXX, AM_CYC, AM_SHR, AM_GRW, AM_REL, XXXXXXX, XXXXXXX, KC_HOME, KC_PGDN, KC_PGUP, KC_END, XXXXXXX, //├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤ - XXXXXXX, KC_PSCR, KC_MENU, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, XXXXXXX, + XXXXXXX, AM_LFT, AM_CCW, AM_CW, AM_RGH, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, XXXXXXX, //├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤ - XXXXXXX, KC_CAPS, KC_LNUM, KC_INS, XXXXXXX, XXXXXXX, XXXXXXX, WKSP_L, WKSP_D, WKSP_U, WKSP_R, XXXXXXX, + XXXXXXX, AM_TLL, AM_TLW, AM_BSP, AM_FUL, XXXXXXX, XXXXXXX, WKSP_L, WKSP_D, WKSP_U, WKSP_R, XXXXXXX, //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐ ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤ _______, XXXXXXX, _______, _______, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘ └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘ @@ -138,7 +151,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //┌────────┬────────┬────────┬────────┬────────┬────────┐ ┌────────┬────────┬────────┬────────┬────────┬────────┐ _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, //├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤ - _______, _______, _______, _______, _______, BL_STEP, RGB_TOG, RGB_HUI, RGB_SAI, RGB_SAI, _______, _______, + _______, _______, _______, _______, _______, BL_STEP, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, //├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤ _______, _______, _______, _______, _______, BL_BRTG, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐ ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤ diff --git a/keyboards/kingly_keys/romac_plus/config.h b/keyboards/kingly_keys/romac_plus/config.h index 503a463f5119..5ea8321de210 100644 --- a/keyboards/kingly_keys/romac_plus/config.h +++ b/keyboards/kingly_keys/romac_plus/config.h @@ -3,8 +3,8 @@ #include "config_common.h" /* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 +#define VENDOR_ID 0x4B4B +#define PRODUCT_ID 0x0002 #define DEVICE_VER 0x0001 #define MANUFACTURER TheRoyalSweatshirt #define PRODUCT RoMac+ diff --git a/keyboards/kyria/kyria.c b/keyboards/kyria/kyria.c index 21ed5e84c8f9..1692093fb25c 100644 --- a/keyboards/kyria/kyria.c +++ b/keyboards/kyria/kyria.c @@ -14,3 +14,4 @@ * along with this program. If not, see . */ #include "kyria.h" + diff --git a/keyboards/kyria/rev1/rev1.c b/keyboards/kyria/rev1/rev1.c index 9aedcc130ac3..970a359e7165 100644 --- a/keyboards/kyria/rev1/rev1.c +++ b/keyboards/kyria/rev1/rev1.c @@ -1 +1,17 @@ -#include "rev1.h" \ No newline at end of file +#include "rev1.h" + +#ifdef SWAP_HANDS_ENABLE +__attribute__ ((weak)) + +const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { + {{0, 4}, {1, 4}, {2, 4}, {3, 4}, {4, 4}, {5, 4}, {6, 4}, {7, 4}}, + {{0, 5}, {1, 5}, {2, 5}, {3, 5}, {4, 5}, {5, 5}, {6, 5}, {7, 5}}, + {{0, 6}, {1, 6}, {2, 6}, {3, 6}, {4, 6}, {5, 6}, {6, 6}, {7, 6}}, + {{0, 7}, {1, 7}, {2, 7}, {3, 7}, {4, 7}, {5, 7}, {6, 7}, {7, 7}}, + {{0, 0}, {1, 0}, {2, 0}, {3, 0}, {4, 0}, {5, 0}, {6, 0}, {7, 0}}, + {{0, 1}, {1, 1}, {2, 1}, {3, 1}, {4, 1}, {5, 1}, {6, 1}, {7, 1}}, + {{0, 2}, {1, 2}, {2, 2}, {3, 2}, {4, 2}, {5, 2}, {6, 2}, {7, 2}}, + {{0, 3}, {1, 3}, {2, 3}, {3, 3}, {4, 3}, {5, 3}, {6, 3}, {7, 3}} +}; + +#endif diff --git a/keyboards/lfkeyboards/TWIlib.c b/keyboards/lfkeyboards/TWIlib.c index abb12cc87ace..dc4fbf016bbf 100644 --- a/keyboards/lfkeyboards/TWIlib.c +++ b/keyboards/lfkeyboards/TWIlib.c @@ -11,6 +11,19 @@ #include "util/delay.h" #include "print.h" +// Global transmit buffer +volatile uint8_t *TWITransmitBuffer; +// Global receive buffer +volatile uint8_t TWIReceiveBuffer[RXMAXBUFLEN]; +// Buffer indexes +volatile int TXBuffIndex; // Index of the transmit buffer. Is volatile, can change at any time. +int RXBuffIndex; // Current index in the receive buffer +// Buffer lengths +int TXBuffLen; // The total length of the transmit buffer +int RXBuffLen; // The total number of bytes to read (should be less than RXMAXBUFFLEN) + +TWIInfoStruct TWIInfo; + void TWIInit() { TWIInfo.mode = Ready; diff --git a/keyboards/lfkeyboards/TWIlib.h b/keyboards/lfkeyboards/TWIlib.h index 6db3cc9513e0..8ba261c6e554 100644 --- a/keyboards/lfkeyboards/TWIlib.h +++ b/keyboards/lfkeyboards/TWIlib.h @@ -16,16 +16,6 @@ #define TXMAXBUFLEN 20 // Receive buffer length #define RXMAXBUFLEN 20 -// Global transmit buffer -volatile uint8_t *TWITransmitBuffer; -// Global receive buffer -volatile uint8_t TWIReceiveBuffer[RXMAXBUFLEN]; -// Buffer indexes -volatile int TXBuffIndex; // Index of the transmit buffer. Is volatile, can change at any time. -int RXBuffIndex; // Current index in the receive buffer -// Buffer lengths -int TXBuffLen; // The total length of the transmit buffer -int RXBuffLen; // The total number of bytes to read (should be less than RXMAXBUFFLEN) typedef enum { Ready, @@ -42,8 +32,8 @@ typedef enum { uint8_t errorCode; uint8_t repStart; }TWIInfoStruct; -TWIInfoStruct TWIInfo; +extern TWIInfoStruct TWIInfo; // TWI Status Codes #define TWI_START_SENT 0x08 // Start sent diff --git a/keyboards/lily58/keymaps/bcat/keymap.c b/keyboards/lily58/keymaps/bcat/keymap.c index 294f9e6c5a30..69864cd08550 100644 --- a/keyboards/lily58/keymaps/bcat/keymap.c +++ b/keyboards/lily58/keymaps/bcat/keymap.c @@ -13,9 +13,9 @@ enum layer { #define LY_RSE MO(LAYER_RAISE) #define KY_CSPC LCTL(KC_SPC) -#define KY_LOCK LGUI(KC_L) -#define KY_WINL LGUI(KC_LEFT) -#define KY_WINR LGUI(KC_RGHT) +#define KY_ZMIN LCTL(KC_EQL) +#define KY_ZMOUT LCTL(KC_MINS) +#define KY_ZMRST LCTL(KC_0) const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Default layer: http://www.keyboard-layout-editor.com/#/gists/e0eb3af65961e9fd612dcff3ddd88e4f */ @@ -31,7 +31,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [LAYER_LOWER] = LAYOUT( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, MC_ALTT, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, - KY_CSPC, KY_WINL, KY_WINR, KY_LOCK, KC_WBAK, KC_WFWD, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_TILD, + KY_CSPC, KY_ZMRST, KY_ZMOUT, KY_ZMIN, KC_WBAK, KC_WFWD, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_TILD, _______, KC_APP, KC_PSCR, KC_SLCK, KC_PAUS, KC_LGUI, _______, _______, KC_BSLS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_GRV, _______, _______, _______, _______, _______, _______, _______, _______ ), diff --git a/keyboards/lily58/keymaps/bcat/readme.md b/keyboards/lily58/keymaps/bcat/readme.md index 6235ff13fcdf..84c2fc335fa0 100644 --- a/keyboards/lily58/keymaps/bcat/readme.md +++ b/keyboards/lily58/keymaps/bcat/readme.md @@ -22,7 +22,7 @@ browser back/forward navigation keys. ## Lower layer -![Lower layer layout](https://i.imgur.com/JVF1p1Q.png) +![Lower layer layout](https://i.imgur.com/sNKWpUC.png) ([KLE](http://www.keyboard-layout-editor.com/#/gists/19ad0d3b5d745fbb2818db09740f5a11)) diff --git a/keyboards/lily58/keymaps/drasbeck/config.h b/keyboards/lily58/keymaps/drasbeck/config.h new file mode 100644 index 000000000000..ffaf5f4bc3fa --- /dev/null +++ b/keyboards/lily58/keymaps/drasbeck/config.h @@ -0,0 +1,46 @@ +/* +Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) 2020 Max Drasbeck + * + * You are free to: + * + * Share — copy and redistribute the material in any medium or format + * Adapt — remix, transform, and build upon the material + * for any purpose, even commercially. + * + * The licensor cannot revoke these freedoms as long as you follow the license terms. +*/ + +#pragma once + +//#define USE_MATRIX_I2C + +/* Select hand configuration */ + +#define MASTER_LEFT +// #define MASTER_RIGHT +// #define EE_HANDS + +#define USE_SERIAL_PD2 + +#define ENCODERS_PAD_A { F4 } +#define ENCODERS_PAD_B { F5 } +#define ENCODER_RESOLUTION 4 + +#define TAPPING_FORCE_HOLD +#define TAPPING_TERM 180 + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 27 +#define RGBLIGHT_LIMIT_VAL 120 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +// Underglow +/* +#undef RGBLED_NUM +#define RGBLED_NUM 14 // Number of LEDs +#define RGBLIGHT_ANIMATIONS +#define RGBLIGHT_SLEEP +*/ diff --git a/keyboards/lily58/keymaps/drasbeck/keymap.c b/keyboards/lily58/keymaps/drasbeck/keymap.c new file mode 100644 index 000000000000..0fc1bfb7946e --- /dev/null +++ b/keyboards/lily58/keymaps/drasbeck/keymap.c @@ -0,0 +1,166 @@ +/* Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) 2020 Max Drasbeck + * + * You are free to: + * + * Share — copy and redistribute the material in any medium or format + * Adapt — remix, transform, and build upon the material + * for any purpose, even commercially. + * + * The licensor cannot revoke these freedoms as long as you follow the license terms. + */ + +#include QMK_KEYBOARD_H + +extern uint8_t is_master; + +enum layers { + _QWERTY, + _LOWER, + _RAISE, + _ADJUST, +}; + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + ADJUST, +}; + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_QWERTY] = LAYOUT( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_NO, KC_MUTE, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_SFTENT, + KC_LALT, KC_LGUI, MO(1), KC_SPC, KC_SPC, MO(2), KC_NUBS, KC_LCTL + ), + + [_LOWER] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PGUP, KC_MINS, KC_EQL, KC_RBRC, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_NO, KC_HOME, KC_PGDN, KC_END, KC_NO, KC_NUHS, + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_RO, KC_ENT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [_RAISE] = LAYOUT( + KC_TRNS, RALT(KC_1), RALT(KC_2), RALT(KC_3), RALT(KC_4), RALT(KC_5), RALT(KC_6), RALT(KC_7), RALT(KC_8), RALT(KC_9), RALT(KC_0), KC_DEL, + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_UP, KC_MINS, KC_EQL, KC_RBRC, + KC_ESC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NUHS, + KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_VOLD, KC_VOLU, KC_MUTE, KC_RO, KC_SFTENT, + KC_RALT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RALT(KC_NUBS), KC_TRNS + ), + + [_ADJUST] = LAYOUT( + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, + _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; + +int RGB_current_mode; + +void matrix_init_user(void) { +#ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; +#endif +} + +//SSD1306 OLED update loop, make sure to enable OLED_DRIVER_ENABLE=yes in rules.mk +#ifdef OLED_DRIVER_ENABLE + +oled_rotation_t oled_init_user(oled_rotation_t rotation) { + if (!is_keyboard_master()) + return OLED_ROTATION_180; // flips the display 180 degrees if offhand + return rotation; +} + +// When you add source files to SRC in rules.mk, you can use functions. +const char *read_layer_state(void); +const char *read_logo(void); +void set_keylog(uint16_t keycode, keyrecord_t *record); +//const char *read_keylog(void); +//const char *read_keylogs(void); + +// const char *read_mode_icon(bool swap); +// const char *read_host_led_state(void); +// void set_timelog(void); +// const char *read_timelog(void); + +void oled_task_user(void) { + if (is_keyboard_master()) { + // If you want to change the display of OLED, you need to change here + oled_write_ln(read_layer_state(), false); + //oled_write_ln(read_keylog(), false); + //oled_write_ln(read_keylogs(), false); + //oled_write_ln(read_mode_icon(keymap_config.swap_lalt_lgui), false); + //oled_write_ln(read_host_led_state(), false); + //oled_write_ln(read_timelog(), false); + } else { + oled_write(read_logo(), false); + } +} +#endif // OLED_DRIVER_ENABLE + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { +#ifdef OLED_DRIVER_ENABLE + set_keylog(keycode, record); +#endif + // set_timelog(); + } + + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + } else { + layer_off(_LOWER); + } + update_tri_layer(_LOWER, _RAISE, _ADJUST); + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + } else { + layer_off(_RAISE); + } + update_tri_layer(_LOWER, _RAISE, _ADJUST); + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + } + return true; +} + +#ifdef ENCODER_ENABLE +void encoder_update_user(uint8_t index, bool clockwise) { + // index 1 == minion side + if (index == 1) { + if (clockwise) { + tap_code(KC_VOLD); + } else { + tap_code(KC_VOLU); + } + } +} +#endif diff --git a/keyboards/lily58/keymaps/drasbeck/readme.md b/keyboards/lily58/keymaps/drasbeck/readme.md new file mode 100644 index 000000000000..51d0991072bd --- /dev/null +++ b/keyboards/lily58/keymaps/drasbeck/readme.md @@ -0,0 +1,14 @@ +## Danish (Dansk) layout for the Lily58 Pro +Keyboard: Lily58 Pro +Keys: Lily58 Pro is 6×4+5keys column-staggered split keyboard, optinal with a rotary encoder. +Flash instructions: Flash each side of the keyboard, minding whether the side uses a Pro Micro or Elite-C controller. + +### Layout +Danish special characters on main layer, moving other characters to mainly raised layer. + +Layer 0 = default +Layer 1 = lower +Layer 2 = raise + +![keymap](https://drasbeck.dk/public/keymap_lily58pro_danskish.png) + diff --git a/keyboards/lily58/keymaps/drasbeck/rules.mk b/keyboards/lily58/keymaps/drasbeck/rules.mk new file mode 100644 index 000000000000..ff8b816e3f47 --- /dev/null +++ b/keyboards/lily58/keymaps/drasbeck/rules.mk @@ -0,0 +1,28 @@ +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +AUDIO_ENABLE = no # Audio output +BLUETOOTH_ENABLE = no # Enable Bluetooth +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +SWAP_HANDS_ENABLE = no # Enable one-hand typing +OLED_DRIVER_ENABLE = yes # OLED display +ENCODER_ENABLE = yes # Enable encoder + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +# If you want to change the display of OLED, you need to change here +SRC += ./lib/rgb_state_reader.c \ + ./lib/layer_state_reader.c \ + ./lib/logo_reader.c \ + ./lib/keylogger.c \ + # ./lib/mode_icon_reader.c \ + # ./lib/host_led_state_reader.c \ + # ./lib/timelogger.c \ diff --git a/keyboards/lily58/keymaps/muuko/config.h b/keyboards/lily58/keymaps/muuko/config.h new file mode 100644 index 000000000000..e963355bd5c9 --- /dev/null +++ b/keyboards/lily58/keymaps/muuko/config.h @@ -0,0 +1,42 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#define EE_HANDS +#define USE_SERIAL_PD2 + +#define OLED_TIMEOUT 300000 + +#define NO_MUSIC_MODE + +#define PERMISSIVE_HOLD +#define IGNORE_MOD_TAP_INTERRUPT + +#ifdef TAPPING_TERM +#undef TAPPING_TERM +#endif +#define TAPPING_TERM 120 + +#ifdef COMBO_COUNT +#undef COMBO_COUNT +#endif +#define COMBO_COUNT 2 +#define COMBO_TERM 20 diff --git a/keyboards/lily58/keymaps/muuko/keymap.c b/keyboards/lily58/keymaps/muuko/keymap.c new file mode 100644 index 000000000000..b8afa0aa4c49 --- /dev/null +++ b/keyboards/lily58/keymaps/muuko/keymap.c @@ -0,0 +1,184 @@ +/* Copyright 2020 @muuko + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +#include +#include + +#define IDLE_FRAMES 5 +#define IDLE_SPEED 20 +#define TAP_FRAMES 2 +#define TAP_SPEED 40 +#define ANIM_FRAME_DURATION 200 +#define ANIM_SIZE 512 + +char wpm[16]; +uint32_t anim_timer = 0; +uint32_t anim_sleep = 0; +uint8_t current_idle_frame = 0; +uint8_t current_tap_frame = 0; + +static long int oled_timeout = 300000; + +enum combos { ESCAPE_COMBO, DELETE_COMBO }; +const uint16_t PROGMEM escape_combo[] = { KC_GRV, KC_1, COMBO_END }; +const uint16_t PROGMEM delete_combo[] = { KC_DOT, KC_SLSH, COMBO_END }; +combo_t key_combos[COMBO_COUNT] = { + [ESCAPE_COMBO] = COMBO(escape_combo, KC_ESC), + [DELETE_COMBO] = COMBO(delete_combo, KC_DEL) +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, LCA_T(KC_MINS), + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, RGUI_T(KC_EQL), + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, RCTL_T(KC_QUOT), + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LBRC, KC_RBRC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, RSFT_T(KC_BSLS), + KC_LGUI, KC_LALT, LT(1, KC_DEL), KC_SPC, KC_ENT, KC_BSPC, MO(1), TG(1) + ), + [1] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TAB, KC_MNXT, KC_HOME, KC_UP, KC_PGUP, KC_VOLU, KC_PMNS, KC_P7, KC_P8, KC_P9, KC_PSLS, LCTL(KC_RGUI), + KC_LCTL, KC_MPLY, KC_LEFT, KC_DOWN, KC_RGHT, KC_VOLD, KC_PPLS, KC_P4, KC_P5, KC_P6, KC_PAST, RCTL_T(KC_PEQL), + KC_LSFT, KC_MPRV, KC_END, KC_DEL, KC_PGDN, KC_MUTE, KC_LPRN, KC_RPRN, KC_P0, KC_P1, KC_P2, KC_P3, C_S_T(KC_PDOT), KC_RSFT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; + +#ifdef OLED_DRIVER_ENABLE +oled_rotation_t oled_init_user(oled_rotation_t rotation) { + if (!is_keyboard_master()) return OLED_ROTATION_180; + else return rotation; +} + +static void render_status(void) { + oled_write_P(PSTR(" layer "), false); + + switch (get_highest_layer(layer_state)) { + case 0: + oled_write_P(PSTR(" 0"), false); + break; + case 1: + oled_write_P(PSTR(" 1"), false); + break; + default: + oled_write_P(PSTR(" ?"), false); + break; + } + + oled_write_P(PSTR("\n\n "), false); + sprintf(wpm, "%03d", get_current_wpm()); + oled_write(wpm, false); + oled_write_P(PSTR(" wpm"), false); +} + +static void render_anim(void) { + static const char PROGMEM idle[IDLE_FRAMES][ANIM_SIZE] = { + { + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,64,64,32,32,32,32,16,16,16,16,16,8,8,4,4,4,8,48,64,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,24,100,130,2,2,2,2,2,1,0,0,0,0,128,128,0,0,0,0,0,0,0,0,0,128,0,48,48,0,192,193,193,194,4,8,16,32,64,128,0,0,0,128,128,128,128,64,64, + 64,64,32,32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,192,56,4,3,0,0,0,0,0,0,0,12,12,12,13,1,0,64,160,33,34,18,17,17,17,9,8,8,8,8,4,4,8,8,16,16,16,16,16,17,15,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,2,2,1,1,1,1,1,1,2,2,4,4,8,8,8,8,8,7, + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 + }, + { + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,64,64,32,32,32,32,16,16,16,16,16,8,8,4,4,4,8,48,64,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,24,100,130,2,2,2,2,2,1,0,0,0,0,128,128,0,0,0,0,0,0,0,0,0,128,0,48,48,0,192,193,193,194,4,8,16,32,64,128,0,0,0,128,128,128,128,64,64, + 64,64,32,32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,192,56,4,3,0,0,0,0,0,0,0,12,12,12,13,1,0,64,160,33,34,18,17,17,17,9,8,8,8,8,4,4,8,8,16,16,16,16,16,17,15,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,2,2,1,1,1,1,1,1,2,2,4,4,8,8,8,8,8, + 7,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 + }, + { + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,64,64,64,64,32,32,32,32,16,8,4,2,2,4,24,96,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,60,194,1,1,2,2,4,4,2,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,96,96,0,129,130,130,132,8,16,32,64,128,0,0,0,0,128,128,128,128,64,64,64,64,32, + 32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,112,25,6,0,0,0,0,0,0,0,24,24,24,27,3,0,64,160,34,36,20,18,18,18,11,8,8,8,8,5,5,9,9,16,16,16,16,16,17,15,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,2,2,1,1,1,1,1,1,2,2,4,4,8,8,8,8,8,7,0,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 + }, + { + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,0,0,0,0,0,128,64,64,32,32,32,32,16,16,16,16,8,4,2,1,1,2,12,48,64,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,30,225,0,0,1,1,2,2,1,0,0,0,0,128,128,0,0,0,0,0,0,0,0,0,128,0,48,48,0,192,193,193,194,4,8,16,32,64,128,0,0,0,128,128,128,128,64,64, + 64,64,32,32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,112,12,3,0,0,0,0,0,0,0,12,12,12,13,1,0,64,160,33,34,18,17,17,17,9,8,8,8,8,4,4,8,8,16,16,16,16,16,17,15,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,2,2,1,1,1,1,1,1,2,2,4,4,8,8,8,8,8, + 7,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 + }, + { + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,64,64,32,32,32,32,16,16,16,16,8,8,4,2,2,2,4,56,64,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,28,226,1,1,2,2,2,2,1,0,0,0,0,128,128,0,0,0,0,0,0,0,0,0,128,0,48,48,0,192,193,193,194,4,8,16,32,64,128,0,0,0,128,128,128,128,64,64,64,64, + 32,32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,112,12,3,0,0,0,0,0,0,0,12,12,12,13,1,0,64,160,33,34,18,17,17,17,9,8,8,8,8,4,4,8,8,16,16,16,16,16,17,15,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,2,2,1,1,1,1,1,1,2,2,4,4,8,8,8,8,8,7,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 + } + }; + static const char PROGMEM prep[][ANIM_SIZE] = { + { + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,0,0,0,0,0,128,64,64,32,32,32,32,16,16,16,16,8,4,2,1,1,2,12,48,64,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,30,225,0,0,1,1,2,2,129,128,128,0,0,128,128,0,0,0,0,0,0,0,0,0,128,0,48,48,0,0,1,225,26,6,9,49,53,1,138,124,0,0,128,128,128,128,64,64, + 64,64,32,32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,112,12,3,0,0,24,6,5,152,153,132,195,124,65,65,64,64,32,33,34,18,17,17,17,9,8,8,8,8,4,4,4,4,4,4,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,2,2,1,1,1,1,1,1,0,0,0,0,0,0,0,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 + } + }; + static const char PROGMEM tap[TAP_FRAMES][ANIM_SIZE] = { + { + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,0,0,0,0,0,128,64,64,32,32,32,32,16,16,16,16,8,4,2,1,1,2,12,48,64,128,0,0,0,0,0,0,0,248,248,248,248,0,0,0,0,0,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,30,225,0,0,1,1,2,2,129,128,128,0,0,128,128,0,0,0,0,0,0,0,0,0,128,0,48,48,0,0,1,1,2,4,8,16,32,67,135,7,1,0,184,188,190,159, + 95,95,79,76,32,32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,112,12,3,0,0,24,6,5,152,153,132,67,124,65,65,64,64,32,33,34,18,17,17,17,9,8,8,8,8,4,4,8,8,16,16,16,16,16,17,15,1,61,124,252,252,252,252,252,60,12,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,2,2,1,1,1, + 1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 + }, + { + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,0,0,0,0,0,128,64,64,32,32,32,32,16,16,16,16,8,4,2,1,1,2,12,48,64,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,30,225,0,0,1,1,2,2,1,0,0,0,0,128,128,0,0,0,0,0,0,0,0,0,128,0,48,48,0,0,1,225,26,6,9,49,53,1,138,124,0,0,128,128,128,128,64,64,64,64,32, + 32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,112,12,3,0,0,0,0,0,0,0,0,0,0,1,1,0,64,160,33,34,18,17,17,17,9,8,8,8,8,4,4,4,4,4,4,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,122,122,121,121,121,121,57,49,2,2,4,4,8,8,8,136,136,135,128, + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 + } + }; + + void animation_phase(void) { + if (get_current_wpm() <= IDLE_SPEED) { + current_idle_frame = (current_idle_frame + 1) % IDLE_FRAMES; + + oled_write_raw_P(idle[abs((IDLE_FRAMES - 1) - current_idle_frame)], ANIM_SIZE); + } + + if (get_current_wpm() > IDLE_SPEED && get_current_wpm() < TAP_SPEED) { + oled_write_raw_P(prep[0], ANIM_SIZE); + } + + if (get_current_wpm() >= TAP_SPEED) { + current_tap_frame = (current_tap_frame + 1) % TAP_FRAMES; + + oled_write_raw_P(tap[abs((TAP_FRAMES - 1) - current_tap_frame)], ANIM_SIZE); + } + } + + sprintf(wpm, "%03d", get_current_wpm()); + + if (strcmp(wpm, "000") != 0) { + anim_sleep = timer_read32(); + } else { + if (timer_elapsed32(anim_sleep) > oled_timeout) { + anim_sleep = 0; + } + } + + if (timer_elapsed32(anim_sleep) > oled_timeout) { + oled_off(); + } else { + oled_on(); + + if (timer_elapsed32(anim_timer) > ANIM_FRAME_DURATION) { + anim_timer = timer_read32(); + + animation_phase(); + } + } +} + +void oled_task_user(void) { + if (is_keyboard_master()) { + render_status(); + } else { + render_anim(); + } +} +#endif diff --git a/keyboards/lily58/keymaps/muuko/rules.mk b/keyboards/lily58/keymaps/muuko/rules.mk new file mode 100644 index 000000000000..3f958dff35b0 --- /dev/null +++ b/keyboards/lily58/keymaps/muuko/rules.mk @@ -0,0 +1,4 @@ +OLED_DRIVER_ENABLE = yes +WPM_ENABLE = yes +EXTRAKEY_ENABLE = yes +COMBO_ENABLE = yes diff --git a/keyboards/lily58/readme.md b/keyboards/lily58/readme.md index cbf0c1eeb02a..1aedab6e1796 100644 --- a/keyboards/lily58/readme.md +++ b/keyboards/lily58/readme.md @@ -10,6 +10,6 @@ Hardware Availability: [PCB & Case Data](https://github.com/kata0510/Lily58) Make example for this keyboard (after setting up your build environment): - sudo make lily58:default + make lily58:default -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/longnald/corin/config.h b/keyboards/longnald/corin/config.h new file mode 100644 index 000000000000..12be8ba27b3d --- /dev/null +++ b/keyboards/longnald/corin/config.h @@ -0,0 +1,52 @@ +/* + * Copyright (C) 2020 Longnald + * Copyright (C) 2020 Seaton Jiang + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5633 +#define PRODUCT_ID 0x1024 +#define DEVICE_VER 0x0004 +#define MANUFACTURER Longnald +#define PRODUCT Corin + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* Keyboard Matrix Assignments */ +#define MATRIX_ROW_PINS { F4, F0, B2, B3, D5 } +#define MATRIX_COL_PINS { F7, F6, F1, F5, B1, E6, D4, B7, D1, D2, D0, B4, B6, C6, C7 } + +#define DIODE_DIRECTION COL2ROW + +#define RGB_DI_PIN D3 +#ifdef RGB_DI_PIN +# define RGBLED_NUM 64 +# define RGBLIGHT_HUE_STEP 20 +# define RGBLIGHT_SAT_STEP 20 +# define RGBLIGHT_VAL_STEP 40 +# define RGBLIGHT_LIMIT_VAL 200 +# define RGBLIGHT_SLEEP +# define RGBLIGHT_EFFECT_BREATHING +# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +# define RGBLIGHT_EFFECT_SNAKE +# define RGBLIGHT_EFFECT_STATIC_GRADIENT +#endif diff --git a/keyboards/longnald/corin/corin.c b/keyboards/longnald/corin/corin.c new file mode 100644 index 000000000000..fabe3686d841 --- /dev/null +++ b/keyboards/longnald/corin/corin.c @@ -0,0 +1,19 @@ +/* + * Copyright (C) 2020 Longnald + * Copyright (C) 2020 Seaton Jiang + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "corin.h" \ No newline at end of file diff --git a/keyboards/longnald/corin/corin.h b/keyboards/longnald/corin/corin.h new file mode 100644 index 000000000000..fa727c3c7897 --- /dev/null +++ b/keyboards/longnald/corin/corin.h @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2020 Longnald + * Copyright (C) 2020 Seaton Jiang + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +#define LAYOUT_64_ansi( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, \ + K10, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K43, K46, K4A, K4B, K4C, K4D, K4E \ +) \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, KC_NO, K0E }, \ + { K10, KC_NO, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, KC_NO, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO }, \ + { KC_NO, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, KC_NO, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, K4E } \ +} diff --git a/keyboards/longnald/corin/info.json b/keyboards/longnald/corin/info.json new file mode 100644 index 000000000000..e0faf22090eb --- /dev/null +++ b/keyboards/longnald/corin/info.json @@ -0,0 +1,77 @@ +{ + "keyboard_name": "Corin", + "url": "https://github.com/longnald/corin", + "maintainer": "Seaton Jiang ", + "width": 15, + "height": 5, + "layouts": { + "LAYOUT_64_ansi": { + "layout": [ + { "label": "K00 (F4,F7)", "x": 0, "y": 0 }, + { "label": "K01 (F4,F6)", "x": 1, "y": 0 }, + { "label": "K02 (F4,F1)", "x": 2, "y": 0 }, + { "label": "K03 (F4,F5)", "x": 3, "y": 0 }, + { "label": "K04 (F4,B1)", "x": 4, "y": 0 }, + { "label": "K05 (F4,E6)", "x": 5, "y": 0 }, + { "label": "K06 (F4,D6)", "x": 6, "y": 0 }, + { "label": "K07 (F4,B7)", "x": 7, "y": 0 }, + { "label": "K08 (F4,D1)", "x": 8, "y": 0 }, + { "label": "K09 (F4,D2)", "x": 9, "y": 0 }, + { "label": "K0A (F4,D0)", "x": 10, "y": 0 }, + { "label": "K0B (F4,B4)", "x": 11, "y": 0 }, + { "label": "K0C (F4,B6)", "x": 12, "y": 0 }, + { "label": "K0E (F4,C7)", "x": 13, "y": 0, "w": 2 }, + { "label": "K10 (F0,F7)", "x": 0, "y": 1, "w": 1.5 }, + { "label": "K12 (F0,F1)", "x": 1.5, "y": 1 }, + { "label": "K13 (F0,F5)", "x": 2.5, "y": 1 }, + { "label": "K14 (F0,B1)", "x": 3.5, "y": 1 }, + { "label": "K15 (F0,E6)", "x": 4.5, "y": 1 }, + { "label": "K16 (F0,D6)", "x": 5.5, "y": 1 }, + { "label": "K17 (F0,B7)", "x": 6.5, "y": 1 }, + { "label": "K18 (F0,D1)", "x": 7.5, "y": 1 }, + { "label": "K19 (F0,D2)", "x": 8.5, "y": 1 }, + { "label": "K1A (F0,D0)", "x": 9.5, "y": 1 }, + { "label": "K1B (F0,B4)", "x": 10.5, "y": 1 }, + { "label": "K1C (F0,B6)", "x": 11.5, "y": 1 }, + { "label": "K1D (F0,C6)", "x": 12.5, "y": 1 }, + { "label": "K1E (F0,C7)", "x": 13.5, "y": 1, "w": 1.5 }, + { "label": "K20 (B2,F7)", "x": 0, "y": 2, "w": 1.75 }, + { "label": "K22 (B2,F1)", "x": 1.75, "y": 2 }, + { "label": "K23 (B2,F5)", "x": 2.75, "y": 2 }, + { "label": "K24 (B2,B1)", "x": 3.75, "y": 2 }, + { "label": "K25 (B2,E6)", "x": 4.75, "y": 2 }, + { "label": "K26 (B2,D6)", "x": 5.75, "y": 2 }, + { "label": "K27 (B2,B7)", "x": 6.75, "y": 2 }, + { "label": "K28 (B2,D1)", "x": 7.75, "y": 2 }, + { "label": "K29 (B2,D2)", "x": 8.75, "y": 2 }, + { "label": "K2A (B2,D0)", "x": 9.75, "y": 2 }, + { "label": "K2B (B2,B4)", "x": 10.75, "y": 2 }, + { "label": "K2C (B2,B6)", "x": 11.75, "y": 2 }, + { "label": "K2D (B2,C6)", "x": 12.75, "y": 2, "w": 2.25 }, + { "label": "K31 (B3,F6)", "x": 0, "y": 3, "w": 2 }, + { "label": "K32 (B3,F1)", "x": 2, "y": 3 }, + { "label": "K33 (B3,F5)", "x": 3, "y": 3 }, + { "label": "K34 (B3,B1)", "x": 4, "y": 3 }, + { "label": "K35 (B3,E6)", "x": 5, "y": 3 }, + { "label": "K36 (B3,D6)", "x": 6, "y": 3 }, + { "label": "K37 (B3,B7)", "x": 7, "y": 3 }, + { "label": "K38 (B3,D1)", "x": 8, "y": 3 }, + { "label": "K39 (B3,D2)", "x": 9, "y": 3 }, + { "label": "K3A (B3,D0)", "x": 10, "y": 3 }, + { "label": "K3B (B3,B4)", "x": 11, "y": 3 }, + { "label": "K3C (B3,B6)", "x": 12, "y": 3 }, + { "label": "K3D (B3,C6)", "x": 13, "y": 3 }, + { "label": "K3E (B3,C7)", "x": 14, "y": 3 }, + { "label": "K40 (D5,F7)", "x": 0, "y": 4, "w": 1.25 }, + { "label": "K41 (D5,F6)", "x": 1.25, "y": 4, "w": 1.25 }, + { "label": "K43 (D5,F5)", "x": 2.5, "y": 4, "w": 1.25 }, + { "label": "K46 (D5,D6)", "x": 3.75, "y": 4, "w": 6.25 }, + { "label": "K4A (D5,D0)", "x": 10, "y": 4 }, + { "label": "K4B (D5,B4)", "x": 11, "y": 4 }, + { "label": "K4C (D5,B6)", "x": 12, "y": 4 }, + { "label": "K4D (D5,C6)", "x": 13, "y": 4 }, + { "label": "K4E (D5,C7)", "x": 14, "y": 4 } + ] + } + } +} diff --git a/keyboards/longnald/corin/keymaps/default/keymap.c b/keyboards/longnald/corin/keymaps/default/keymap.c new file mode 100644 index 000000000000..c8906efc596f --- /dev/null +++ b/keyboards/longnald/corin/keymaps/default/keymap.c @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2020 Longnald + * Copyright (C) 2020 Seaton Jiang + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_64_ansi( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_HOME, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(2), MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_64_ansi( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_INS, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PGUP, KC_NO, KC_PGDN, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO + ), + [2] = LAYOUT_64_ansi( + KC_NO, RGB_TOG, RGB_M_P, RGB_M_B, RGB_M_G, RGB_M_SW, RGB_M_SN, KC_NO, KC_NO, RGB_HUD, RGB_HUI, RGB_VAD, RGB_VAI, KC_NO, + KC_NO, KC_NO, LAG_NRM, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, LAG_SWP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + MO(3), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO + ), + [3] = LAYOUT_64_ansi( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO + ), +}; diff --git a/keyboards/longnald/corin/readme.md b/keyboards/longnald/corin/readme.md new file mode 100644 index 000000000000..116baa7d2811 --- /dev/null +++ b/keyboards/longnald/corin/readme.md @@ -0,0 +1,15 @@ +# Corin + +![Corin view](https://github.com/longnald/corin/raw/master/view/view-1.jpg) + +Corin is a 64-key keyboard that adds 4 more arrow keys than a regular 60% keyboard made and sold by Seaton Jiang. + +- Keyboard Maintainer: [Longnald](https://github.com/longnald) & [Seaton Jiang](https://github.com/seatonjiang) +- Hardware Supported: [Corin PCB (uses 32U4)](https://github.com/longnald/corin) +- Hardware Availability: [wwww.longnald.com](https://wwww.longnald.com/) + +Make example for this keyboard (after setting up your build environment): + + make longnald/corin:default + +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/longnald/corin/rules.mk b/keyboards/longnald/corin/rules.mk new file mode 100644 index 000000000000..965087c1a6a6 --- /dev/null +++ b/keyboards/longnald/corin/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/majistic/config.h b/keyboards/majistic/config.h new file mode 100644 index 000000000000..4ced5dd890f1 --- /dev/null +++ b/keyboards/majistic/config.h @@ -0,0 +1,57 @@ + +/* +Copyright 2020 yossiyossy + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6E55 +#define DEVICE_VER 0x0001 +#define MANUFACTURER yossiyossy +#define PRODUCT maJIStic + +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 8 + +#define MATRIX_ROW_PINS { F6, F7, B1, B3, B2 } +#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5, F4, F5 } // F4, F5 is dummy +#define MATRIX_ROW_PINS_RIGHT { D4, C6, D7, E6, B4 } +#define MATRIX_COL_PINS_RIGHT { B6, B2, B3, B1, F7, F6, F5, F4 } + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION diff --git a/keyboards/majistic/info.json b/keyboards/majistic/info.json new file mode 100644 index 000000000000..2ae92678823c --- /dev/null +++ b/keyboards/majistic/info.json @@ -0,0 +1,78 @@ +{ + "keyboard_name": "maJIStic", + "url": "https://github.com/yossiyossy/maJIStic", + "maintainer": "yossiyossy", + "width": 15.5, + "height": 5, + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"1", "x":0, "y":0, "w":1.5}, + {"label":"2", "x":1.5, "y":0}, + {"label":"3", "x":2.5, "y":0}, + {"label":"4", "x":3.5, "y":0}, + {"label":"5", "x":4.5, "y":0}, + {"label":"6", "x":5.5, "y":0}, + {"label":"7", "x":7.5, "y":0}, + {"label":"8", "x":8.5, "y":0}, + {"label":"9", "x":9.5, "y":0}, + {"label":"0", "x":10.5, "y":0}, + {"label":"-", "x":11.5, "y":0}, + {"label":"^", "x":12.5, "y":0}, + {"label":"\\", "x":13.5, "y":0}, + {"label":"BS", "x":14.5, "y":0}, + {"label":"Tab", "x":0, "y":1}, + {"label":"Q", "x":1, "y":1}, + {"label":"W", "x":2, "y":1}, + {"label":"E", "x":3, "y":1}, + {"label":"R", "x":4, "y":1}, + {"label":"T", "x":5, "y":1}, + {"label":"Y", "x":7, "y":1}, + {"label":"U", "x":8, "y":1}, + {"label":"I", "x":9, "y":1}, + {"label":"O", "x":10, "y":1}, + {"label":"P", "x":11, "y":1}, + {"label":"@", "x":12, "y":1}, + {"label":"[", "x":13, "y":1}, + {"label":"Caps Lock", "x":0, "y":2, "w":1.25}, + {"label":"A", "x":1.25, "y":2}, + {"label":"S", "x":2.25, "y":2}, + {"label":"D", "x":3.25, "y":2}, + {"label":"F", "x":4.25, "y":2}, + {"label":"G", "x":5.25, "y":2}, + {"label":"H", "x":7.25, "y":2}, + {"label":"J", "x":8.25, "y":2}, + {"label":"K", "x":9.25, "y":2}, + {"label":"L", "x":10.25, "y":2}, + {"label":";", "x":11.25, "y":2}, + {"label":":", "x":12.25, "y":2}, + {"label":"]", "x":13.25, "y":2}, + {"label":"Enter", "x":14.25, "y":1, "w":1.25, "h":2}, + {"label":"Shift", "x":0, "y":3, "w":1.75}, + {"label":"Z", "x":1.75, "y":3}, + {"label":"X", "x":2.75, "y":3}, + {"label":"C", "x":3.75, "y":3}, + {"label":"V", "x":4.75, "y":3}, + {"label":"B", "x":5.75, "y":3}, + {"label":"N", "x":7.75, "y":3}, + {"label":"M", "x":8.75, "y":3}, + {"label":",", "x":9.75, "y":3}, + {"label":".", "x":10.75, "y":3}, + {"label":"/", "x":11.75, "y":3}, + {"label":"up", "x":12.75, "y":3}, + {"label":"Shift", "x":13.75, "y":3, "w":1.75}, + {"label":"Ctrl", "x":0, "y":4}, + {"label":"Alt", "x":1, "y":4}, + {"label":"command", "x":2, "y":4, "w":1.25}, + {"label":"EISU", "x":3.25, "y":4, "w":1.25}, + {"label":"", "x":4.5, "y":4, "w":1.75}, + {"label":"", "x":7.25, "y":4, "w":1.5}, + {"label":"KANA", "x":8.75, "y":4, "w":1.5}, + {"label":"command", "x":10.25, "y":4, "w":1.5}, + {"label":"left", "x":11.75, "y":4}, + {"label":"down", "x":12.75, "y":4}, + {"label":"right", "x":13.75, "y":4} + ] + } + } +} diff --git a/keyboards/majistic/keymaps/default/config.h b/keyboards/majistic/keymaps/default/config.h new file mode 100644 index 000000000000..4db5715cbacc --- /dev/null +++ b/keyboards/majistic/keymaps/default/config.h @@ -0,0 +1,17 @@ +/* Copyright 2020 yossiyossy + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once diff --git a/keyboards/majistic/keymaps/default/keymap.c b/keyboards/majistic/keymaps/default/keymap.c new file mode 100644 index 000000000000..e26a631d719d --- /dev/null +++ b/keyboards/majistic/keymaps/default/keymap.c @@ -0,0 +1,45 @@ +/* Copyright 2020 yossiyossy + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H +#include "keymap_jp.h" + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _LOWER, +}; + +enum custom_keycodes { + L_SPC = SAFE_RANGE, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT( + JP_1, JP_2, JP_3, JP_4, JP_5, JP_6, JP_7, JP_8, JP_9, JP_0, JP_MINS, JP_CIRC, JP_YEN, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, JP_AT, JP_LBRC, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, JP_SCLN, JP_COLN, JP_RBRC, KC_ENT , \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, JP_COMM, JP_DOT, JP_SLSH, KC_UP, KC_RSFT, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_LANG2, LT(_LOWER, KC_SPC), LT(_LOWER, KC_SPC), KC_LANG1, KC_RGUI, KC_LEFT, KC_DOWN, KC_RIGHT \ + ), + [_LOWER] = LAYOUT( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, \ + KC_ESC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, JP_UNDS, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BRMU, KC_VOLU, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_BRMD, KC_VOLD, _______ \ + ), +}; diff --git a/keyboards/majistic/keymaps/default/readme.md b/keyboards/majistic/keymaps/default/readme.md new file mode 100644 index 000000000000..65ee11cd798e --- /dev/null +++ b/keyboards/majistic/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for maJIStic diff --git a/keyboards/majistic/majistic.c b/keyboards/majistic/majistic.c new file mode 100644 index 000000000000..7ceba7cf2899 --- /dev/null +++ b/keyboards/majistic/majistic.c @@ -0,0 +1,17 @@ +/* Copyright 2020 yossiyossy + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "majistic.h" diff --git a/keyboards/majistic/majistic.h b/keyboards/majistic/majistic.h new file mode 100644 index 000000000000..77c4a4912146 --- /dev/null +++ b/keyboards/majistic/majistic.h @@ -0,0 +1,47 @@ +/* Copyright 2020 yossiyossy + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define LAYOUT(\ + l00, l01, l02, l03, l04, l05, r00, r01, r02, r03, r04, r05, r06, r07, \ + l10, l11, l12, l13, l14, l15, r10, r11, r12, r13, r14, r15, r16, \ + l20, l21, l22, l23, l24, l25, r20, r21, r22, r23, r24, r25, r26, r17, \ + l30, l31, l32, l33, l34, l35, r30, r31, r32, r33, r34, r35, r36, \ + l40, l41, l42, l43, l44, r40, r41, r42, r43, r44, r45 \ +) {\ + { l00, l01, l02, l03, l04, l05, KC_NO, KC_NO }, \ + { l10, l11, l12, l13, l14, l15, KC_NO, KC_NO }, \ + { l20, l21, l22, l23, l24, l25, KC_NO, KC_NO}, \ + { l30, l31, l32, l33, l34, l35, KC_NO, KC_NO}, \ + { l40, l41, l42, l43, l44, KC_NO, KC_NO, KC_NO}, \ + { r00, r01, r02, r03, r04, r05, r06, r07 }, \ + { r10, r11, r12, r13, r14, r15, r16, r17 }, \ + { r20, r21, r22, r23, r24, r25, r26, KC_NO }, \ + { r30, r31, r32, r33, r34, r35, r36, KC_NO }, \ + { r40, r41, r42, r43, r44, r45, KC_NO, KC_NO } \ +} diff --git a/keyboards/majistic/readme.md b/keyboards/majistic/readme.md new file mode 100644 index 000000000000..05916af4e5f7 --- /dev/null +++ b/keyboards/majistic/readme.md @@ -0,0 +1,15 @@ +# maJIStic + +![maJIStic](https://raw.githubusercontent.com/yossiyossy/maJIStic/master/images/main_image.jpg) + +maJIStic is a split, JIS, magic keyboard like, hot-swappable keybaord! + +* Keyboard Maintainer: [yossiyossy](https://github.com/yossiyossy) +* Hardware Supported: [pcb](https://github.com/yossiyossy/maJIStic/tree/master/pcb), [case](https://github.com/yossiyossy/maJIStic/tree/master/case/dxf) +* Hardware Availability: [booth](https://yossiyossy.booth.pm/items/2325429) + +Make example for this keyboard (after setting up your build environment): + + make majistic:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/katana60/rules.mk b/keyboards/majistic/rules.mk similarity index 56% rename from keyboards/katana60/rules.mk rename to keyboards/majistic/rules.mk index e41c168c4fc3..2440fc903d5d 100644 --- a/keyboards/katana60/rules.mk +++ b/keyboards/majistic/rules.mk @@ -2,19 +2,12 @@ MCU = atmega32u4 # Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# ATmega32A bootloadHID -# ATmega328P USBasp BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug @@ -23,9 +16,9 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE = no # MIDI support -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output + +SPLIT_KEYBOARD = yes diff --git a/keyboards/massdrop/alt/keymaps/default/keymap.c b/keyboards/massdrop/alt/keymaps/default/keymap.c index 52fd35b45476..0d3e7ccb7a37 100644 --- a/keyboards/massdrop/alt/keymaps/default/keymap.c +++ b/keyboards/massdrop/alt/keymaps/default/keymap.c @@ -10,8 +10,6 @@ enum alt_keycodes { MD_BOOT, //Restart into bootloader after hold timeout }; -keymap_config_t keymap_config; - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_65_ansi_blocker( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, \ @@ -38,14 +36,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ }; -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { -}; - -// Runs constantly in the background, in a loop. -void matrix_scan_user(void) { -}; - #define MODS_SHIFT (get_mods() & MOD_BIT(KC_LSHIFT) || get_mods() & MOD_BIT(KC_RSHIFT)) #define MODS_CTRL (get_mods() & MOD_BIT(KC_LCTL) || get_mods() & MOD_BIT(KC_RCTRL)) #define MODS_ALT (get_mods() & MOD_BIT(KC_LALT) || get_mods() & MOD_BIT(KC_RALT)) diff --git a/keyboards/massdrop/alt/keymaps/default_md/keymap.c b/keyboards/massdrop/alt/keymaps/default_md/keymap.c index 6523790f6da7..9894caf48eea 100644 --- a/keyboards/massdrop/alt/keymaps/default_md/keymap.c +++ b/keyboards/massdrop/alt/keymaps/default_md/keymap.c @@ -21,8 +21,6 @@ enum alt_keycodes { MD_BOOT //Restart into bootloader after hold timeout //Working }; -keymap_config_t keymap_config; - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, \ @@ -49,14 +47,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ }; -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { -}; - -// Runs constantly in the background, in a loop. -void matrix_scan_user(void) { -}; - #define MODS_SHIFT (get_mods() & MOD_BIT(KC_LSHIFT) || get_mods() & MOD_BIT(KC_RSHIFT)) #define MODS_CTRL (get_mods() & MOD_BIT(KC_LCTL) || get_mods() & MOD_BIT(KC_RCTRL)) #define MODS_ALT (get_mods() & MOD_BIT(KC_LALT) || get_mods() & MOD_BIT(KC_RALT)) @@ -186,7 +176,7 @@ led_instruction_t led_instructions[] = { //Flags can be found in tmk_core/protocol/arm_atsam/led_matrix.h (prefixed with LED_FLAG_) //LED IDs can be found in config_led.h in the keyboard's directory //Examples are below - + //All LEDs use the user's selected pattern (this is the factory default) { .flags = LED_FLAG_USE_ROTATE_PATTERN }, @@ -195,7 +185,7 @@ led_instruction_t led_instructions[] = { //Specific LEDs use specified RGB values while all others are off // { .flags = LED_FLAG_MATCH_ID | LED_FLAG_USE_RGB, .id0 = 0xFF, .id1 = 0x00FF, .id2 = 0x0000FF00, .id3 = 0xFF000000, .r = 75, .g = 150, .b = 225 }, - + //All LEDs use the user's selected pattern //On layer 1, all key LEDs (except the top row which keeps active pattern) are red while all edge LEDs are green //When layer 1 is active, key LEDs use red (id0 32 - 16: 1111 1111 1111 1111 1000 0000 0000 0000 = 0xFFFF8000) (except top row 15 - 1) diff --git a/keyboards/massdrop/alt/keymaps/mac/keymap.c b/keyboards/massdrop/alt/keymaps/mac/keymap.c index 9f575b4f126a..70ce6198b48e 100644 --- a/keyboards/massdrop/alt/keymaps/mac/keymap.c +++ b/keyboards/massdrop/alt/keymaps/mac/keymap.c @@ -10,8 +10,6 @@ enum alt_keycodes { MD_BOOT, //Restart into bootloader after hold timeout }; -keymap_config_t keymap_config; - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, \ @@ -38,14 +36,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ }; -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { -}; - -// Runs constantly in the background, in a loop. -void matrix_scan_user(void) { -}; - #define MODS_SHIFT (get_mods() & MOD_BIT(KC_LSHIFT) || get_mods() & MOD_BIT(KC_RSHIFT)) #define MODS_CTRL (get_mods() & MOD_BIT(KC_LCTL) || get_mods() & MOD_BIT(KC_RCTRL)) #define MODS_ALT (get_mods() & MOD_BIT(KC_LALT) || get_mods() & MOD_BIT(KC_RALT)) diff --git a/keyboards/massdrop/alt/keymaps/mac_md/keymap.c b/keyboards/massdrop/alt/keymaps/mac_md/keymap.c index 439e79399704..b3626c1b6113 100644 --- a/keyboards/massdrop/alt/keymaps/mac_md/keymap.c +++ b/keyboards/massdrop/alt/keymaps/mac_md/keymap.c @@ -21,8 +21,6 @@ enum alt_keycodes { MD_BOOT //Restart into bootloader after hold timeout //Working }; -keymap_config_t keymap_config; - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, \ @@ -49,14 +47,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ }; -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { -}; - -// Runs constantly in the background, in a loop. -void matrix_scan_user(void) { -}; - #define MODS_SHIFT (get_mods() & MOD_BIT(KC_LSHIFT) || get_mods() & MOD_BIT(KC_RSHIFT)) #define MODS_CTRL (get_mods() & MOD_BIT(KC_LCTL) || get_mods() & MOD_BIT(KC_RCTRL)) #define MODS_ALT (get_mods() & MOD_BIT(KC_LALT) || get_mods() & MOD_BIT(KC_RALT)) diff --git a/keyboards/masterworks/classy_tkl/info.json b/keyboards/masterworks/classy_tkl/info.json new file mode 100644 index 000000000000..5cf93dfbd94e --- /dev/null +++ b/keyboards/masterworks/classy_tkl/info.json @@ -0,0 +1,279 @@ +{ + "keyboard_name": "Classy TKL", + "url": "https://geekhack.org/index.php?topic=105933", + "maintainer": "qmk", + "width": 18.25, + "height": 6.5, + "layouts": { + "LAYOUT_all": { + "layout": [ + { "label": "Esc", "x": 0, "y": 0 }, + { "label": "F1", "x": 2, "y": 0 }, + { "label": "F2", "x": 3, "y": 0 }, + { "label": "F3", "x": 4, "y": 0 }, + { "label": "F4", "x": 5, "y": 0 }, + { "label": "F5", "x": 6.5, "y": 0 }, + { "label": "F6", "x": 7.5, "y": 0 }, + { "label": "F7", "x": 8.5, "y": 0 }, + { "label": "F8", "x": 9.5, "y": 0 }, + { "label": "F9", "x": 11, "y": 0 }, + { "label": "F10", "x": 12, "y": 0 }, + { "label": "F11", "x": 13, "y": 0 }, + { "label": "F12", "x": 14, "y": 0 }, + { "label": "PrtSc", "x": 15.25, "y": 0 }, + { "label": "Scroll Lock", "x": 16.25, "y": 0 }, + { "label": "Pause", "x": 17.25, "y": 0 }, + { "label": "~", "x": 0, "y": 1.5 }, + { "label": "!", "x": 1, "y": 1.5 }, + { "label": "@", "x": 2, "y": 1.5 }, + { "label": "#", "x": 3, "y": 1.5 }, + { "label": "$", "x": 4, "y": 1.5 }, + { "label": "%", "x": 5, "y": 1.5 }, + { "label": "^", "x": 6, "y": 1.5 }, + { "label": "&", "x": 7, "y": 1.5 }, + { "label": "*", "x": 8, "y": 1.5 }, + { "label": "(", "x": 9, "y": 1.5 }, + { "label": ")", "x": 10, "y": 1.5 }, + { "label": "_", "x": 11, "y": 1.5 }, + { "label": "+", "x": 12, "y": 1.5 }, + { "label": "Backspace", "x": 13, "y": 1.5 }, + { "label": "Backspace2", "x": 14, "y": 1.5 }, + { "label": "Insert", "x": 15.25, "y": 1.5 }, + { "label": "Home", "x": 16.25, "y": 1.5 }, + { "label": "PgUp", "x": 17.25, "y": 1.5 }, + { "label": "Tab", "x": 0, "y": 2.5, "w": 1.5 }, + { "label": "Q", "x": 1.5, "y": 2.5 }, + { "label": "W", "x": 2.5, "y": 2.5 }, + { "label": "E", "x": 3.5, "y": 2.5 }, + { "label": "R", "x": 4.5, "y": 2.5 }, + { "label": "T", "x": 5.5, "y": 2.5 }, + { "label": "Y", "x": 6.5, "y": 2.5 }, + { "label": "U", "x": 7.5, "y": 2.5 }, + { "label": "I", "x": 8.5, "y": 2.5 }, + { "label": "O", "x": 9.5, "y": 2.5 }, + { "label": "P", "x": 10.5, "y": 2.5 }, + { "label": "{", "x": 11.5, "y": 2.5 }, + { "label": "}", "x": 12.5, "y": 2.5 }, + { "label": "|", "x": 13.5, "y": 2.5, "w": 1.5 }, + { "label": "Delete", "x": 15.25, "y": 2.5 }, + { "label": "End", "x": 16.25, "y": 2.5 }, + { "label": "PgDn", "x": 17.25, "y": 2.5 }, + { "label": "Caps Lock", "x": 0, "y": 3.5, "w": 1.75 }, + { "label": "A", "x": 1.75, "y": 3.5 }, + { "label": "S", "x": 2.75, "y": 3.5 }, + { "label": "D", "x": 3.75, "y": 3.5 }, + { "label": "F", "x": 4.75, "y": 3.5 }, + { "label": "G", "x": 5.75, "y": 3.5 }, + { "label": "H", "x": 6.75, "y": 3.5 }, + { "label": "J", "x": 7.75, "y": 3.5 }, + { "label": "K", "x": 8.75, "y": 3.5 }, + { "label": "L", "x": 9.75, "y": 3.5 }, + { "label": ":", "x": 10.75, "y": 3.5 }, + { "label": "\"", "x": 11.75, "y": 3.5 }, + { "label": "Enter", "x": 12.75, "y": 3.5, "w": 2.25 }, + { "label": "Shift", "x": 0, "y": 4.5, "w": 1.25 }, + { "label": "|", "x": 1.25, "y": 4.5 }, + { "label": "Z", "x": 2.25, "y": 4.5 }, + { "label": "X", "x": 3.25, "y": 4.5 }, + { "label": "C", "x": 4.25, "y": 4.5 }, + { "label": "V", "x": 5.25, "y": 4.5 }, + { "label": "B", "x": 6.25, "y": 4.5 }, + { "label": "N", "x": 7.25, "y": 4.5 }, + { "label": "M", "x": 8.25, "y": 4.5 }, + { "label": "<", "x": 9.25, "y": 4.5 }, + { "label": ">", "x": 10.25, "y": 4.5 }, + { "label": "?", "x": 11.25, "y": 4.5 }, + { "label": "Shift", "x": 12.25, "y": 4.5, "w": 1.75 }, + { "label": "Shift2", "x": 14, "y": 4.5, "w": 1 }, + { "label": "Up", "x": 16.25, "y": 4.5 }, + { "label": "Ctrl", "x": 0, "y": 5.5, "w": 1.5 }, + { "label": "Win", "x": 1.5, "y": 5.5, "w": 1 }, + { "label": "Alt", "x": 2.5, "y": 5.5, "w": 1.5 }, + { "label": "Space", "x": 4, "y": 5.5, "w": 7 }, + { "label": "Alt", "x": 11, "y": 5.5, "w": 1.5 }, + { "label": "Win", "x": 12.5, "y": 5.5, "w": 1 }, + { "label": "Ctrl", "x": 13.5, "y": 5.5, "w": 1.5 }, + { "label": "Left", "x": 15.25, "y": 5.5 }, + { "label": "Down", "x": 16.25, "y": 5.5 }, + { "label": "Right", "x": 17.25, "y": 5.5 } + ] + }, + "LAYOUT_tkl_ansi_wkl": { + "layout": [ + { "label": "Esc", "x": 0, "y": 0 }, + { "label": "F1", "x": 2, "y": 0 }, + { "label": "F2", "x": 3, "y": 0 }, + { "label": "F3", "x": 4, "y": 0 }, + { "label": "F4", "x": 5, "y": 0 }, + { "label": "F5", "x": 6.5, "y": 0 }, + { "label": "F6", "x": 7.5, "y": 0 }, + { "label": "F7", "x": 8.5, "y": 0 }, + { "label": "F8", "x": 9.5, "y": 0 }, + { "label": "F9", "x": 11, "y": 0 }, + { "label": "F10", "x": 12, "y": 0 }, + { "label": "F11", "x": 13, "y": 0 }, + { "label": "F12", "x": 14, "y": 0 }, + { "label": "PrtSc", "x": 15.25, "y": 0 }, + { "label": "Scroll Lock", "x": 16.25, "y": 0 }, + { "label": "Pause", "x": 17.25, "y": 0 }, + { "label": "~", "x": 0, "y": 1.5 }, + { "label": "!", "x": 1, "y": 1.5 }, + { "label": "@", "x": 2, "y": 1.5 }, + { "label": "#", "x": 3, "y": 1.5 }, + { "label": "$", "x": 4, "y": 1.5 }, + { "label": "%", "x": 5, "y": 1.5 }, + { "label": "^", "x": 6, "y": 1.5 }, + { "label": "&", "x": 7, "y": 1.5 }, + { "label": "*", "x": 8, "y": 1.5 }, + { "label": "(", "x": 9, "y": 1.5 }, + { "label": ")", "x": 10, "y": 1.5 }, + { "label": "_", "x": 11, "y": 1.5 }, + { "label": "+", "x": 12, "y": 1.5 }, + { "label": "Backspace", "x": 13, "y": 1.5, "w": 2 }, + { "label": "Insert", "x": 15.25, "y": 1.5 }, + { "label": "Home", "x": 16.25, "y": 1.5 }, + { "label": "PgUp", "x": 17.25, "y": 1.5 }, + { "label": "Tab", "x": 0, "y": 2.5, "w": 1.5 }, + { "label": "Q", "x": 1.5, "y": 2.5 }, + { "label": "W", "x": 2.5, "y": 2.5 }, + { "label": "E", "x": 3.5, "y": 2.5 }, + { "label": "R", "x": 4.5, "y": 2.5 }, + { "label": "T", "x": 5.5, "y": 2.5 }, + { "label": "Y", "x": 6.5, "y": 2.5 }, + { "label": "U", "x": 7.5, "y": 2.5 }, + { "label": "I", "x": 8.5, "y": 2.5 }, + { "label": "O", "x": 9.5, "y": 2.5 }, + { "label": "P", "x": 10.5, "y": 2.5 }, + { "label": "{", "x": 11.5, "y": 2.5 }, + { "label": "}", "x": 12.5, "y": 2.5 }, + { "label": "|", "x": 13.5, "y": 2.5, "w": 1.5 }, + { "label": "Delete", "x": 15.25, "y": 2.5 }, + { "label": "End", "x": 16.25, "y": 2.5 }, + { "label": "PgDn", "x": 17.25, "y": 2.5 }, + { "label": "Caps Lock", "x": 0, "y": 3.5, "w": 1.75 }, + { "label": "A", "x": 1.75, "y": 3.5 }, + { "label": "S", "x": 2.75, "y": 3.5 }, + { "label": "D", "x": 3.75, "y": 3.5 }, + { "label": "F", "x": 4.75, "y": 3.5 }, + { "label": "G", "x": 5.75, "y": 3.5 }, + { "label": "H", "x": 6.75, "y": 3.5 }, + { "label": "J", "x": 7.75, "y": 3.5 }, + { "label": "K", "x": 8.75, "y": 3.5 }, + { "label": "L", "x": 9.75, "y": 3.5 }, + { "label": ":", "x": 10.75, "y": 3.5 }, + { "label": "\"", "x": 11.75, "y": 3.5 }, + { "label": "Enter", "x": 12.75, "y": 3.5, "w": 2.25 }, + { "label": "Shift", "x": 0, "y": 4.5, "w": 2.25 }, + { "label": "Z", "x": 2.25, "y": 4.5 }, + { "label": "X", "x": 3.25, "y": 4.5 }, + { "label": "C", "x": 4.25, "y": 4.5 }, + { "label": "V", "x": 5.25, "y": 4.5 }, + { "label": "B", "x": 6.25, "y": 4.5 }, + { "label": "N", "x": 7.25, "y": 4.5 }, + { "label": "M", "x": 8.25, "y": 4.5 }, + { "label": "<", "x": 9.25, "y": 4.5 }, + { "label": ">", "x": 10.25, "y": 4.5 }, + { "label": "?", "x": 11.25, "y": 4.5 }, + { "label": "Shift", "x": 12.25, "y": 4.5, "w": 2.75 }, + { "label": "Up", "x": 16.25, "y": 4.5 }, + { "label": "Ctrl", "x": 0, "y": 5.5, "w": 1.5 }, + { "label": "Alt", "x": 2.5, "y": 5.5, "w": 1.5 }, + { "label": "Space", "x": 4, "y": 5.5, "w": 7 }, + { "label": "Alt", "x": 11, "y": 5.5, "w": 1.5 }, + { "label": "Ctrl", "x": 13.5, "y": 5.5, "w": 1.5 }, + { "label": "Left", "x": 15.25, "y": 5.5 }, + { "label": "Down", "x": 16.25, "y": 5.5 }, + { "label": "Right", "x": 17.25, "y": 5.5 } + ] + }, + "LAYOUT_tkl_iso_wkl": { + "layout": [ + { "label": "Esc", "x": 0, "y": 0 }, + { "label": "F1", "x": 2, "y": 0 }, + { "label": "F2", "x": 3, "y": 0 }, + { "label": "F3", "x": 4, "y": 0 }, + { "label": "F4", "x": 5, "y": 0 }, + { "label": "F5", "x": 6.5, "y": 0 }, + { "label": "F6", "x": 7.5, "y": 0 }, + { "label": "F7", "x": 8.5, "y": 0 }, + { "label": "F8", "x": 9.5, "y": 0 }, + { "label": "F9", "x": 11, "y": 0 }, + { "label": "F10", "x": 12, "y": 0 }, + { "label": "F11", "x": 13, "y": 0 }, + { "label": "F12", "x": 14, "y": 0 }, + { "label": "PrtSc", "x": 15.25, "y": 0 }, + { "label": "Scroll Lock", "x": 16.25, "y": 0 }, + { "label": "Pause", "x": 17.25, "y": 0 }, + { "label": "\u00ac", "x": 0, "y": 1.5 }, + { "label": "!", "x": 1, "y": 1.5 }, + { "label": "\"", "x": 2, "y": 1.5 }, + { "label": "\u00a3", "x": 3, "y": 1.5 }, + { "label": "$", "x": 4, "y": 1.5 }, + { "label": "%", "x": 5, "y": 1.5 }, + { "label": "^", "x": 6, "y": 1.5 }, + { "label": "&", "x": 7, "y": 1.5 }, + { "label": "*", "x": 8, "y": 1.5 }, + { "label": "(", "x": 9, "y": 1.5 }, + { "label": ")", "x": 10, "y": 1.5 }, + { "label": "_", "x": 11, "y": 1.5 }, + { "label": "+", "x": 12, "y": 1.5 }, + { "label": "Backspace", "x": 13, "y": 1.5, "w": 2 }, + { "label": "Insert", "x": 15.25, "y": 1.5 }, + { "label": "Home", "x": 16.25, "y": 1.5 }, + { "label": "PgUp", "x": 17.25, "y": 1.5 }, + { "label": "Tab", "x": 0, "y": 2.5, "w": 1.5 }, + { "label": "Q", "x": 1.5, "y": 2.5 }, + { "label": "W", "x": 2.5, "y": 2.5 }, + { "label": "E", "x": 3.5, "y": 2.5 }, + { "label": "R", "x": 4.5, "y": 2.5 }, + { "label": "T", "x": 5.5, "y": 2.5 }, + { "label": "Y", "x": 6.5, "y": 2.5 }, + { "label": "U", "x": 7.5, "y": 2.5 }, + { "label": "I", "x": 8.5, "y": 2.5 }, + { "label": "O", "x": 9.5, "y": 2.5 }, + { "label": "P", "x": 10.5, "y": 2.5 }, + { "label": "{", "x": 11.5, "y": 2.5 }, + { "label": "}", "x": 12.5, "y": 2.5 }, + { "label": "Delete", "x": 15.25, "y": 2.5 }, + { "label": "End", "x": 16.25, "y": 2.5 }, + { "label": "PgDn", "x": 17.25, "y": 2.5 }, + { "label": "Caps Lock", "x": 0, "y": 3.5, "w": 1.75 }, + { "label": "A", "x": 1.75, "y": 3.5 }, + { "label": "S", "x": 2.75, "y": 3.5 }, + { "label": "D", "x": 3.75, "y": 3.5 }, + { "label": "F", "x": 4.75, "y": 3.5 }, + { "label": "G", "x": 5.75, "y": 3.5 }, + { "label": "H", "x": 6.75, "y": 3.5 }, + { "label": "J", "x": 7.75, "y": 3.5 }, + { "label": "K", "x": 8.75, "y": 3.5 }, + { "label": "L", "x": 9.75, "y": 3.5 }, + { "label": ":", "x": 10.75, "y": 3.5 }, + { "label": "@", "x": 11.75, "y": 3.5 }, + { "label": "~", "x": 12.75, "y": 3.5 }, + { "label": "Enter", "x": 13.75, "y": 2.5, "w": 1.25, "h": 2 }, + { "label": "Shift", "x": 0, "y": 4.5, "w": 1.25 }, + { "label": "|", "x": 1.25, "y": 4.5 }, + { "label": "Z", "x": 2.25, "y": 4.5 }, + { "label": "X", "x": 3.25, "y": 4.5 }, + { "label": "C", "x": 4.25, "y": 4.5 }, + { "label": "V", "x": 5.25, "y": 4.5 }, + { "label": "B", "x": 6.25, "y": 4.5 }, + { "label": "N", "x": 7.25, "y": 4.5 }, + { "label": "M", "x": 8.25, "y": 4.5 }, + { "label": "<", "x": 9.25, "y": 4.5 }, + { "label": ">", "x": 10.25, "y": 4.5 }, + { "label": "?", "x": 11.25, "y": 4.5 }, + { "label": "Shift", "x": 12.25, "y": 4.5, "w": 2.75 }, + { "label": "Up", "x": 16.25, "y": 4.5 }, + { "label": "Ctrl", "x": 0, "y": 5.5, "w": 1.5 }, + { "label": "Alt", "x": 2.5, "y": 5.5, "w": 1.5 }, + { "label": "Space", "x": 4, "y": 5.5, "w": 7 }, + { "label": "AltGr", "x": 11, "y": 5.5, "w": 1.5 }, + { "label": "Ctrl", "x": 13.5, "y": 5.5, "w": 1.5 }, + { "label": "Left", "x": 15.25, "y": 5.5 }, + { "label": "Down", "x": 16.25, "y": 5.5 }, + { "label": "Right", "x": 17.25, "y": 5.5 } + ] + } + } +} diff --git a/keyboards/masterworks/classy_tkl/keymaps/default/config.h b/keyboards/masterworks/classy_tkl/keymaps/default/config.h new file mode 100644 index 000000000000..e328e5a3b04c --- /dev/null +++ b/keyboards/masterworks/classy_tkl/keymaps/default/config.h @@ -0,0 +1,19 @@ +/* Copyright 2020 Mathias Andersson + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// place overrides here diff --git a/keyboards/masterworks/classy_tkl/keymaps/default/keymap.c b/keyboards/masterworks/classy_tkl/keymaps/default/keymap.c new file mode 100644 index 000000000000..a87656059c68 --- /dev/null +++ b/keyboards/masterworks/classy_tkl/keymaps/default/keymap.c @@ -0,0 +1,29 @@ +/* +Copyright 2020 Mathias Andersson + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include QMK_KEYBOARD_H + +// clang-format off +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, KC_INS , KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL , KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_NO, KC_UP, + KC_LCTL, KC_NO, KC_LALT, KC_SPC, KC_RALT, KC_NO, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT) +}; +// clang-format on diff --git a/keyboards/masterworks/classy_tkl/keymaps/default/readme.md b/keyboards/masterworks/classy_tkl/keymaps/default/readme.md new file mode 100644 index 000000000000..72b4eb54a072 --- /dev/null +++ b/keyboards/masterworks/classy_tkl/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default winkeyless ANSI keymap for the Classy TKL diff --git a/keyboards/masterworks/classy_tkl/keymaps/default_tkl_ansi_wkl/config.h b/keyboards/masterworks/classy_tkl/keymaps/default_tkl_ansi_wkl/config.h new file mode 100644 index 000000000000..e328e5a3b04c --- /dev/null +++ b/keyboards/masterworks/classy_tkl/keymaps/default_tkl_ansi_wkl/config.h @@ -0,0 +1,19 @@ +/* Copyright 2020 Mathias Andersson + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// place overrides here diff --git a/keyboards/masterworks/classy_tkl/keymaps/default_tkl_ansi_wkl/keymap.c b/keyboards/masterworks/classy_tkl/keymaps/default_tkl_ansi_wkl/keymap.c new file mode 100644 index 000000000000..bb7b256fdadd --- /dev/null +++ b/keyboards/masterworks/classy_tkl/keymaps/default_tkl_ansi_wkl/keymap.c @@ -0,0 +1,29 @@ +/* +Copyright 2020 Mathias Andersson + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include QMK_KEYBOARD_H + +// clang-format off +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_tkl_ansi_wkl( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS , KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL , KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT) +}; +// clang-format on diff --git a/keyboards/masterworks/classy_tkl/keymaps/default_tkl_ansi_wkl/readme.md b/keyboards/masterworks/classy_tkl/keymaps/default_tkl_ansi_wkl/readme.md new file mode 100644 index 000000000000..72b4eb54a072 --- /dev/null +++ b/keyboards/masterworks/classy_tkl/keymaps/default_tkl_ansi_wkl/readme.md @@ -0,0 +1 @@ +# The default winkeyless ANSI keymap for the Classy TKL diff --git a/keyboards/masterworks/classy_tkl/keymaps/default_tkl_iso_wkl/config.h b/keyboards/masterworks/classy_tkl/keymaps/default_tkl_iso_wkl/config.h new file mode 100644 index 000000000000..e328e5a3b04c --- /dev/null +++ b/keyboards/masterworks/classy_tkl/keymaps/default_tkl_iso_wkl/config.h @@ -0,0 +1,19 @@ +/* Copyright 2020 Mathias Andersson + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// place overrides here diff --git a/keyboards/masterworks/classy_tkl/keymaps/default_tkl_iso_wkl/keymap.c b/keyboards/masterworks/classy_tkl/keymaps/default_tkl_iso_wkl/keymap.c new file mode 100644 index 000000000000..1456ee02a204 --- /dev/null +++ b/keyboards/masterworks/classy_tkl/keymaps/default_tkl_iso_wkl/keymap.c @@ -0,0 +1,29 @@ +/* +Copyright 2020 Mathias Andersson + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include QMK_KEYBOARD_H + +// clang-format off +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_tkl_iso_wkl( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS , KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL , KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, + KC_LSFT, KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT) +}; +// clang-format on diff --git a/keyboards/masterworks/classy_tkl/keymaps/default_tkl_iso_wkl/readme.md b/keyboards/masterworks/classy_tkl/keymaps/default_tkl_iso_wkl/readme.md new file mode 100644 index 000000000000..a4b8c86b1dcd --- /dev/null +++ b/keyboards/masterworks/classy_tkl/keymaps/default_tkl_iso_wkl/readme.md @@ -0,0 +1 @@ +# The default winkeyless ISO keymap for the Classy TKL diff --git a/keyboards/masterworks/classy_tkl/keymaps/via/keymap.c b/keyboards/masterworks/classy_tkl/keymaps/via/keymap.c new file mode 100644 index 000000000000..c26f147eacd5 --- /dev/null +++ b/keyboards/masterworks/classy_tkl/keymaps/via/keymap.c @@ -0,0 +1,50 @@ +/* +Copyright 2020 Mathias Andersson + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include QMK_KEYBOARD_H + +// clang-format off +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, KC_INS , KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL , KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_NO, KC_UP, + KC_LCTL, KC_NO, KC_LALT, KC_SPC, KC_RALT, KC_NO, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + [1] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; +// clang-format on diff --git a/keyboards/masterworks/classy_tkl/keymaps/via/rules.mk b/keyboards/masterworks/classy_tkl/keymaps/via/rules.mk new file mode 100644 index 000000000000..1e5b99807cb7 --- /dev/null +++ b/keyboards/masterworks/classy_tkl/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/masterworks/classy_tkl/readme.md b/keyboards/masterworks/classy_tkl/readme.md new file mode 100644 index 000000000000..0557ed7f4c4c --- /dev/null +++ b/keyboards/masterworks/classy_tkl/readme.md @@ -0,0 +1,15 @@ +# Classy TKL + +![Classy TKL](https://i.imgur.com/p1dxfYKl.jpg) + +A short description of the keyboard/project + +* Keyboard Maintainer: [Mathias Andersson](https://github.com/wraul) +* Hardware Supported: [Classy TKL PCB](https://github.com/4pplet/classyTKL) +* Hardware Availability: https://geekhack.org/index.php?topic=105933 + +Make example for this keyboard (after setting up your build environment): + + make masterworks/classy_tkl:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/masterworks/classy_tkl/rev_a/config.h b/keyboards/masterworks/classy_tkl/rev_a/config.h new file mode 100644 index 000000000000..0821b1dfcec8 --- /dev/null +++ b/keyboards/masterworks/classy_tkl/rev_a/config.h @@ -0,0 +1,58 @@ +/* +Copyright 2020 Mathias Andersson + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4D57 // "MW" = Masterworks +#define PRODUCT_ID 0x0001 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Masterworks +#define PRODUCT Classy TKL + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 17 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS \ + { C7, F0, F1, F4, F5, F6 } +#define MATRIX_COL_PINS \ + { B4, D7, D6, D4, C6, D5, D3, D2, D1, D0, B7, B3, B2, B1, B0, E6, F7 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE diff --git a/keyboards/masterworks/classy_tkl/rev_a/rev_a.c b/keyboards/masterworks/classy_tkl/rev_a/rev_a.c new file mode 100644 index 000000000000..58c0393db7e3 --- /dev/null +++ b/keyboards/masterworks/classy_tkl/rev_a/rev_a.c @@ -0,0 +1,42 @@ +/* Copyright 2020 Mathias Andersson + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "rev_a.h" + +#define CAPS_PIN B5 +#define SCROLL_PIN B6 + +// Optional override functions below. +// You can leave any or all of these undefined. +// These are only required if you want to perform custom actions. + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + setPinOutput(CAPS_PIN); + setPinOutput(SCROLL_PIN); + + matrix_init_user(); +} + +bool led_update_kb(led_t led_state) { + bool res = led_update_user(led_state); + if(res) { + writePin(CAPS_PIN, led_state.caps_lock); + writePin(SCROLL_PIN, led_state.scroll_lock); + } + return res; +} diff --git a/keyboards/masterworks/classy_tkl/rev_a/rev_a.h b/keyboards/masterworks/classy_tkl/rev_a/rev_a.h new file mode 100644 index 000000000000..73e68b598d07 --- /dev/null +++ b/keyboards/masterworks/classy_tkl/rev_a/rev_a.h @@ -0,0 +1,79 @@ +/* Copyright 2020 Mathias Andersson + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +// clang-format off +#define LAYOUT_all( \ + k00, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, k0G, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k3D, k1E, k1F, k1G, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, \ + k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4F, \ + k50, k52, k53, k57, k5B, k5C, k5D, k5E, k5F, k5G \ +) \ +{ \ + { k00, KC_NO, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, k0G }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, KC_NO, KC_NO, KC_NO }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, KC_NO, k4F, KC_NO }, \ + { k50, KC_NO, k52, k53, KC_NO, KC_NO, KC_NO, k57, KC_NO, KC_NO, KC_NO, k5B, k5C, k5D, k5E, k5F, k5G }, \ +} + +#define LAYOUT_tkl_ansi_wkl( \ + k00, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, k0G, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k3D, k1E, k1F, k1G, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, \ + k40, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4F, \ + k50, k53, k57, k5B, k5D, k5E, k5F, k5G \ +) \ +{ \ + { k00, KC_NO, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, k0G }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, KC_NO, k1E, k1F, k1G }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, KC_NO, KC_NO, KC_NO }, \ + { k40, KC_NO, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, KC_NO, KC_NO, k4F, KC_NO }, \ + { k50, KC_NO, KC_NO, k53, KC_NO, KC_NO, KC_NO, k57, KC_NO, KC_NO, KC_NO, k5B, KC_NO, k5D, k5E, k5F, k5G }, \ +} + +#define LAYOUT_tkl_iso_wkl( \ + k00, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, k0G, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k3D, k1E, k1F, k1G, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2E, k2F, k2G, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k2D, \ + k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4F, \ + k50, k53, k57, k5B, k5D, k5E, k5F, k5G \ +) \ +{ \ + { k00, KC_NO, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, k0G }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, KC_NO, k1E, k1F, k1G }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, KC_NO, KC_NO, KC_NO }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, KC_NO, KC_NO, k4F, KC_NO }, \ + { k50, KC_NO, KC_NO, k53, KC_NO, KC_NO, KC_NO, k57, KC_NO, KC_NO, KC_NO, k5B, KC_NO, k5D, k5E, k5F, k5G }, \ +} +// clang-format on diff --git a/keyboards/masterworks/classy_tkl/rev_a/rules.mk b/keyboards/masterworks/classy_tkl/rev_a/rules.mk new file mode 100644 index 000000000000..34bcd87a4aaa --- /dev/null +++ b/keyboards/masterworks/classy_tkl/rev_a/rules.mk @@ -0,0 +1,26 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output + +# Supported layouts +LAYOUTS = tkl_ansi_wkl tkl_iso_wkl diff --git a/keyboards/matrix/m20add/rules.mk b/keyboards/matrix/m20add/rules.mk index 6dba153932cb..fb97c1d3c8f2 100644 --- a/keyboards/matrix/m20add/rules.mk +++ b/keyboards/matrix/m20add/rules.mk @@ -1,38 +1,15 @@ -## chip/board settings -# - the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F4xx +# MCU name +MCU = STM32F411 # Linker script to use # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ # or /ld/ MCU_LDSCRIPT = m20add_boot -# Startup code to use -# - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f4xx - # Board: it should exist either in /os/hal/boards/ # or /boards BOARD = m20add_bd -# Cortex version -MCU = cortex-m4 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 - -USE_FPU = yes - -# Vector table for application -# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ -OPT_DEFS = - -# Options to pass to dfu-util when flashing -#DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -#DFU_SUFFIX_ARGS = -p DF11 -v 0483 - # Build Options # comment out to disable the options. # diff --git a/keyboards/matrix/noah/info.json b/keyboards/matrix/noah/info.json index f35bbd5808ec..69fc0fccfcb3 100644 --- a/keyboards/matrix/noah/info.json +++ b/keyboards/matrix/noah/info.json @@ -1426,6 +1426,9 @@ "y": 4 } ] + }, + "LAYOUT_65_iso_blocker": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":13.75, "y":1, "w":1.25, "h":2}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] } } } diff --git a/keyboards/matrix/noah/keymaps/rys/keymap.c b/keyboards/matrix/noah/keymaps/rys/keymap.c new file mode 100644 index 000000000000..73ee8e1fec5c --- /dev/null +++ b/keyboards/matrix/noah/keymaps/rys/keymap.c @@ -0,0 +1,59 @@ +/* Copyright 2020 Rys Sommefeldt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program i s distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_65_iso_blocker( + /* + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐ + * │Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp│ ` │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤ + * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │     │Del│ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ Ent├───┤ + * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ # │    │PUp│ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┼───┤ + * │Shft│ \ │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift│ ↑ │PDn│ + * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │LCtl│LGUI│LAlt│      Spaaaaaaace       │RAlt│ L1 │ │ ← │ ↓ │ → │ + * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ + */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_65_iso_blocker( + /* + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐ + * │RST│ F1│ F2│ F3│ F4│ F5│ F6│ F7│ F8│ F9│F10│F11│F12│       │   │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤ + * │ TOG │PLN│MOD│HU+│HU-│SA+│SA-│VA+│VA-│   │   │   │   │     │   │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐    ├───┤ + * │      │   │   │   │   │   │   │   │   │   │   │   │   │    │   │ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┼───┤ + * │    │   │   │   │   │   │   │   │   │   │   │   │      │ │   │ + * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │    │    │    │                        │    │    │ │ │ │ │ + * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ + */ + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + RGB_TOG, RGB_M_P, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/matrix/noah/noah.h b/keyboards/matrix/noah/noah.h index 5d0da798dbea..15810c70638f 100644 --- a/keyboards/matrix/noah/noah.h +++ b/keyboards/matrix/noah/noah.h @@ -48,6 +48,20 @@ {k40, k41, k42,KC_NO,k43,KC_NO,KC_NO, k45, k46, k47, k48, k1e, k2e, k3e, k0f} \ } +#define LAYOUT_65_iso_blocker( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, k0f, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k43, k44, k45, k46, k47, k48 \ +) { \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c,KC_NO, k0e}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c,KC_NO, KC_NO}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, KC_NO}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO}, \ + {k40, k41, k42,KC_NO,k43,KC_NO,k44, k45, k46, k47, k48, k1e, k2e, k3e, k0f} \ +} + #define LAYOUT_default_splitspace( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, \ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \ diff --git a/keyboards/matrix/noah/rules.mk b/keyboards/matrix/noah/rules.mk index 80854e67e1fc..19e432d2a0e2 100644 --- a/keyboards/matrix/noah/rules.mk +++ b/keyboards/matrix/noah/rules.mk @@ -1,38 +1,15 @@ -## chip/board settings -# - the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F4xx +# MCU name +MCU = STM32F411 # Linker script to use # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ # or /ld/ MCU_LDSCRIPT = noah_boot -# Startup code to use -# - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f4xx - # Board: it should exist either in /os/hal/boards/ # or /boards BOARD = noah_bd -# Cortex version -MCU = cortex-m4 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 - -USE_FPU = yes - -# Vector table for application -# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ -OPT_DEFS = - -# Options to pass to dfu-util when flashing -#DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -#DFU_SUFFIX_ARGS = -p DF11 -v 0483 - # Build Options # comment out to disable the options. # @@ -52,3 +29,5 @@ RGBLIGHT_CUSTOM_DRIVER = yes CUSTOM_MATRIX = yes # project specific files SRC += ws2812.c matrix.c + +LAYOUTS = 65_iso_blocker diff --git a/keyboards/meira/TWIlib.c b/keyboards/meira/TWIlib.c index 8e0c974381f1..4091429b4efe 100755 --- a/keyboards/meira/TWIlib.c +++ b/keyboards/meira/TWIlib.c @@ -11,6 +11,19 @@ #include "util/delay.h" #include "print.h" +// Global transmit buffer +volatile uint8_t *TWITransmitBuffer; +// Global receive buffer +volatile uint8_t TWIReceiveBuffer[RXMAXBUFLEN]; +// Buffer indexes +volatile int TXBuffIndex; // Index of the transmit buffer. Is volatile, can change at any time. +int RXBuffIndex; // Current index in the receive buffer +// Buffer lengths +int TXBuffLen; // The total length of the transmit buffer +int RXBuffLen; // The total number of bytes to read (should be less than RXMAXBUFFLEN) + +TWIInfoStruct TWIInfo; + void TWIInit() { TWIInfo.mode = Ready; diff --git a/keyboards/meira/TWIlib.h b/keyboards/meira/TWIlib.h index 6db3cc9513e0..8ba261c6e554 100755 --- a/keyboards/meira/TWIlib.h +++ b/keyboards/meira/TWIlib.h @@ -16,16 +16,6 @@ #define TXMAXBUFLEN 20 // Receive buffer length #define RXMAXBUFLEN 20 -// Global transmit buffer -volatile uint8_t *TWITransmitBuffer; -// Global receive buffer -volatile uint8_t TWIReceiveBuffer[RXMAXBUFLEN]; -// Buffer indexes -volatile int TXBuffIndex; // Index of the transmit buffer. Is volatile, can change at any time. -int RXBuffIndex; // Current index in the receive buffer -// Buffer lengths -int TXBuffLen; // The total length of the transmit buffer -int RXBuffLen; // The total number of bytes to read (should be less than RXMAXBUFFLEN) typedef enum { Ready, @@ -42,8 +32,8 @@ typedef enum { uint8_t errorCode; uint8_t repStart; }TWIInfoStruct; -TWIInfoStruct TWIInfo; +extern TWIInfoStruct TWIInfo; // TWI Status Codes #define TWI_START_SENT 0x08 // Start sent diff --git a/keyboards/melgeek/mj61/config.h b/keyboards/melgeek/mj61/config.h new file mode 100644 index 000000000000..452b1c8728ec --- /dev/null +++ b/keyboards/melgeek/mj61/config.h @@ -0,0 +1,19 @@ +/* Copyright 2020 MelGeek + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" diff --git a/keyboards/melgeek/mj61/info.json b/keyboards/melgeek/mj61/info.json new file mode 100644 index 000000000000..460858474c48 --- /dev/null +++ b/keyboards/melgeek/mj61/info.json @@ -0,0 +1,78 @@ +{ + "keyboard_name": "MJ61", + "url": "", + "maintainer": "melgeek001365", + "width": 15, + "height": 5, + "layouts": { + "LAYOUT_60_ansi": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":13.75, "y":4, "w":1.25} + ] + } + } +} diff --git a/keyboards/melgeek/mj61/keymaps/default/keymap.c b/keyboards/melgeek/mj61/keymaps/default/keymap.c new file mode 100644 index 000000000000..2237851fbebc --- /dev/null +++ b/keyboards/melgeek/mj61/keymaps/default/keymap.c @@ -0,0 +1,42 @@ +/* Copyright 2020 MelGeek + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_60_ansi( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), MO(2), KC_RCTL + ), + [1] = LAYOUT_60_ansi( + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + _______, _______, KC_UP, _______, _______, _______, KC_CALC, _______, KC_INS, _______, KC_PSCR, KC_SLCK, KC_PAUS, RESET, + _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, EEP_RST, + KC_MPRV, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, NK_TOGG, _______, _______, KC_END, KC_PGDN, KC_MNXT, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + [2] = LAYOUT_60_ansi( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_TOG, _______, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_MOD, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, RGB_SPI, RGB_SPD, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; + diff --git a/keyboards/melgeek/mj61/keymaps/via/keymap.c b/keyboards/melgeek/mj61/keymaps/via/keymap.c new file mode 100644 index 000000000000..409a37c9b10c --- /dev/null +++ b/keyboards/melgeek/mj61/keymaps/via/keymap.c @@ -0,0 +1,49 @@ +/* Copyright 2020 MelGeek + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_60_ansi( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), MO(2), KC_RCTL + ), + [1] = LAYOUT_60_ansi( + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + _______, _______, KC_UP, _______, _______, _______, KC_CALC, _______, KC_INS, _______, KC_PSCR, KC_SLCK, KC_PAUS, RESET, + _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, EEP_RST, + KC_MPRV, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, NK_TOGG, _______, _______, KC_END, KC_PGDN, KC_MNXT, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + [2] = LAYOUT_60_ansi( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_TOG, _______, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_MOD, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, RGB_SPI, RGB_SPD, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + [3] = LAYOUT_60_ansi( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; + diff --git a/keyboards/melgeek/mj61/keymaps/via/rules.mk b/keyboards/melgeek/mj61/keymaps/via/rules.mk new file mode 100644 index 000000000000..36b7ba9cbc98 --- /dev/null +++ b/keyboards/melgeek/mj61/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/melgeek/mj61/mj61.c b/keyboards/melgeek/mj61/mj61.c new file mode 100644 index 000000000000..21853019f0e8 --- /dev/null +++ b/keyboards/melgeek/mj61/mj61.c @@ -0,0 +1,124 @@ +/* Copyright 2020 MelGeek + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "mj61.h" + +#ifdef RGB_MATRIX_ENABLE +const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { + {0, CS12_SW1, CS11_SW1, CS10_SW1}, /* RGB1 */ + {0, CS12_SW2, CS11_SW2, CS10_SW2}, /* RGB2 */ + {0, CS12_SW3, CS11_SW3, CS10_SW3}, /* RGB3 */ + {0, CS12_SW4, CS11_SW4, CS10_SW4}, /* RGB4 */ + {0, CS12_SW5, CS11_SW5, CS10_SW5}, /* RGB5 */ + {0, CS12_SW6, CS11_SW6, CS10_SW6}, /* RGB6 */ + {0, CS12_SW7, CS11_SW7, CS10_SW7}, /* RGB7 */ + {0, CS12_SW8, CS11_SW8, CS10_SW8}, /* RGB8 */ + {0, CS12_SW9, CS11_SW9, CS10_SW9}, /* RGB9 */ + {0, CS15_SW1, CS14_SW1, CS13_SW1}, /* RGB10 */ + {0, CS15_SW2, CS14_SW2, CS13_SW2}, /* RGB11 */ + {0, CS15_SW3, CS14_SW3, CS13_SW3}, /* RGB12 */ + {0, CS15_SW4, CS14_SW4, CS13_SW4}, /* RGB13 */ + {0, CS15_SW5, CS14_SW5, CS13_SW5}, /* RGB14 */ + {0, CS15_SW6, CS14_SW6, CS13_SW6}, /* RGB15 */ + {0, CS15_SW7, CS14_SW7, CS13_SW7}, /* RGB16 */ + {0, CS15_SW8, CS14_SW8, CS13_SW8}, /* RGB17 */ + {0, CS15_SW9, CS14_SW9, CS13_SW9}, /* RGB18 */ + {0, CS18_SW1, CS17_SW1, CS16_SW1}, /* RGB19 */ + {0, CS18_SW2, CS17_SW2, CS16_SW2}, /* RGB20 */ + {0, CS18_SW3, CS17_SW3, CS16_SW3}, /* RGB21 */ + {0, CS18_SW4, CS17_SW4, CS16_SW4}, /* RGB22 */ + {0, CS18_SW5, CS17_SW5, CS16_SW5}, /* RGB23 */ + {0, CS18_SW6, CS17_SW6, CS16_SW6}, /* RGB24 */ + {0, CS18_SW7, CS17_SW7, CS16_SW7}, /* RGB25 */ + {0, CS18_SW8, CS17_SW8, CS16_SW8}, /* RGB26 */ + {0, CS18_SW9, CS17_SW9, CS16_SW9}, /* RGB27 */ + {0, CS21_SW1, CS20_SW1, CS19_SW1}, /* RGB28 */ + {0, CS21_SW2, CS20_SW2, CS19_SW2}, /* RGB29 */ + {0, CS21_SW3, CS20_SW3, CS19_SW3}, /* RGB30 */ + {0, CS21_SW4, CS20_SW4, CS19_SW4}, /* RGB31 */ + {0, CS21_SW5, CS20_SW5, CS19_SW5}, /* RGB32 */ + {0, CS21_SW6, CS20_SW6, CS19_SW6}, /* RGB33 */ + {0, CS21_SW7, CS20_SW7, CS19_SW7}, /* RGB34 */ + {0, CS21_SW8, CS20_SW8, CS19_SW8}, /* RGB35 */ + {0, CS21_SW9, CS20_SW9, CS19_SW9}, /* RGB36 */ + {0, CS24_SW1, CS23_SW1, CS22_SW1}, /* RGB37 */ + {0, CS24_SW2, CS23_SW2, CS22_SW2}, /* RGB38 */ + {0, CS24_SW3, CS23_SW3, CS22_SW3}, /* RGB39 */ + {0, CS24_SW4, CS23_SW4, CS22_SW4}, /* RGB40 */ + {0, CS24_SW5, CS23_SW5, CS22_SW5}, /* RGB41 */ + {0, CS24_SW6, CS23_SW6, CS22_SW6}, /* RGB42 */ + {0, CS24_SW7, CS23_SW7, CS22_SW7}, /* RGB43 */ + {0, CS24_SW8, CS23_SW8, CS22_SW8}, /* RGB44 */ + {0, CS24_SW9, CS23_SW9, CS22_SW9}, /* RGB45 */ + {0, CS27_SW1, CS26_SW1, CS25_SW1}, /* RGB46 */ + {0, CS27_SW2, CS26_SW2, CS25_SW2}, /* RGB47 */ + {0, CS27_SW3, CS26_SW3, CS25_SW3}, /* RGB48 */ + {0, CS27_SW4, CS26_SW4, CS25_SW4}, /* RGB49 */ + {0, CS27_SW5, CS26_SW5, CS25_SW5}, /* RGB50 */ + {0, CS27_SW6, CS26_SW6, CS25_SW6}, /* RGB51 */ + {0, CS27_SW7, CS26_SW7, CS25_SW7}, /* RGB52 */ + {0, CS27_SW8, CS26_SW8, CS25_SW8}, /* RGB53 */ + {0, CS27_SW9, CS26_SW9, CS25_SW9}, /* RGB54 */ + {0, CS30_SW1, CS29_SW1, CS28_SW1}, /* RGB55 */ + {0, CS30_SW2, CS29_SW2, CS28_SW2}, /* RGB56 */ + {0, CS30_SW3, CS29_SW3, CS28_SW3}, /* RGB57 */ + {0, CS30_SW4, CS29_SW4, CS28_SW4}, /* RGB58 */ + {0, CS30_SW5, CS29_SW5, CS28_SW5}, /* RGB59 */ + {0, CS30_SW6, CS29_SW6, CS28_SW6}, /* RGB60 */ + {0, CS30_SW7, CS29_SW7, CS28_SW7}, /* RGB61 */ + {0, CS30_SW8, CS29_SW8, CS28_SW8}, /* RGB62 */ + {0, CS30_SW9, CS29_SW9, CS28_SW9}, /* RGB63 */ +}; + +led_config_t g_led_config = { + { + /* C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 */ + { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 }, /* R0 */ + { 27, 26, 25, 24, 23, 22, 21, 20, 19, 18, 17, 16, 15, 14 }, /* R1 */ + { 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, NO_LED,}, /* R2 */ + { 52, NO_LED, 51, 50, 49, 48, 47, 46, 45, 44, 43, 42, 41, NO_LED }, /* R3 */ + { 53, 54, NO_LED, 55, 61, 56, 62, NO_LED, NO_LED, 57, 58, 59, 60, NO_LED }, /* R4 */ + }, { + {0, 0}, {16, 0}, {32, 0}, {48, 0}, {64, 0}, {80, 0}, {96, 0}, {112, 0}, {128, 0}, {144, 0}, {160, 0}, {176, 0}, {192, 0}, {208, 0}, + {0, 16}, {16, 16}, {32, 16}, {48, 16}, {64, 16}, {80, 16}, {96, 16}, {112, 16}, {128, 16}, {144, 16}, {160, 16}, {176, 16}, {192, 16}, {208, 16}, + {0, 32}, {16, 32}, {32, 32}, {48, 32}, {64, 32}, {80, 32}, {96, 32}, {112, 32}, {128, 32}, {144, 32}, {160, 32}, {176, 32}, {192, 32}, + {0, 48}, {16, 48}, {32, 48}, {48, 48}, {64, 48}, {80, 48}, {96, 48}, {112, 48}, {128, 48}, {144, 48}, {160, 48}, {176, 48}, + {0, 64}, {16, 64}, {32, 64}, {48, 64}, {64, 64}, {80, 64}, {96, 64}, {112, 64}, {128, 64}, {144, 64}, + }, { + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + } +}; + +void suspend_power_down_kb(void) { + rgb_matrix_set_suspend_state(true); + suspend_power_down_user(); +} + +void suspend_wakeup_init_kb(void) { + rgb_matrix_set_suspend_state(false); + suspend_wakeup_init_user(); +} + +void keyboard_pre_init_kb(void) { + setPinOutput(A2); + writePinHigh(A2); + keyboard_pre_init_user(); +} +#endif diff --git a/keyboards/melgeek/mj61/mj61.h b/keyboards/melgeek/mj61/mj61.h new file mode 100644 index 000000000000..1881196dba4c --- /dev/null +++ b/keyboards/melgeek/mj61/mj61.h @@ -0,0 +1,35 @@ +/* Copyright 2020 MelGeek + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define XXX KC_NO + +#define LAYOUT_60_ansi( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \ + K40, K41, K43, K45, K49, K4A, K4B, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, XXX }, \ + { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, XXX }, \ + { K40, K41, XXX, K43, XXX, K45, XXX, XXX, XXX, K49, K4A, K4B, XXX, K4D } \ +} diff --git a/keyboards/melgeek/mj61/readme.md b/keyboards/melgeek/mj61/readme.md new file mode 100644 index 000000000000..2db0e71b6f9f --- /dev/null +++ b/keyboards/melgeek/mj61/readme.md @@ -0,0 +1,15 @@ +# MelGeek MJ61 + +![MJ61](https://cdn.shopifycdn.net/s/files/1/0078/2863/5712/products/a0ebad495be43c4c42403878b4af4ac2_1024x1024@2x.jpg?v=1600672895) + +A hotswap 60% RGB Custom Mechanical keyboard. + +* Keyboard Maintainer: [melgeek](https://github.com/melgeek001365) +* Hardware Supported: MJ61 V1.1.2 20200612 +* Hardware Availability: [MelGeek](https://www.melgeek.com/) + +Make example for this keyboard (after setting up your build environment): + + make melgeek/mj61/rev1:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/melgeek/mj61/rev1/config.h b/keyboards/melgeek/mj61/rev1/config.h new file mode 100644 index 000000000000..a0ba953b0e99 --- /dev/null +++ b/keyboards/melgeek/mj61/rev1/config.h @@ -0,0 +1,70 @@ +/* Copyright 2020 MelGeek + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0xED61 +#define DEVICE_VER 0x0001 +#define MANUFACTURER MelGeek +#define PRODUCT MJ61 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ + +#define MATRIX_ROW_PINS { B12, B11, B10, B1, A3 } +#define MATRIX_COL_PINS { B15, A8, A10, A15, B3, B4, B5, B8, B9, C13, C14, C15, A0, A1 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 3 + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended +#define RGB_MATRIX_KEYPRESSES +#define RGB_MATRIX_LED_PROCESS_LIMIT 4 +#define RGB_MATRIX_LED_FLUSH_LIMIT 26 +#define DISABLE_RGB_MATRIX_SPLASH +#define DISABLE_RGB_MATRIX_MULTISPLASH +#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +//#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR +#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL +#define DRIVER_ADDR_1 0b0110000 +#define DRIVER_ADDR_2 0b0110000 // this is here for compliancy reasons. +#define DRIVER_COUNT 1 +#define DRIVER_1_LED_TOTAL 63 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL +#define DRIVER_INDICATOR_LED_TOTAL 0 diff --git a/keyboards/melgeek/mj61/rev1/rules.mk b/keyboards/melgeek/mj61/rev1/rules.mk new file mode 100644 index 000000000000..ba7f9eac25af --- /dev/null +++ b/keyboards/melgeek/mj61/rev1/rules.mk @@ -0,0 +1,20 @@ +# MCU name +MCU = STM32F303 + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +RGB_MATRIX_ENABLE = IS31FL3741 # Use RGB matrix +NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in diff --git a/keyboards/metamechs/timberwolf/keymaps/a_ansi/keymap.c b/keyboards/metamechs/timberwolf/keymaps/a_ansi/keymap.c index 0e4f99442d37..7d66af49bc62 100644 --- a/keyboards/metamechs/timberwolf/keymaps/a_ansi/keymap.c +++ b/keyboards/metamechs/timberwolf/keymaps/a_ansi/keymap.c @@ -33,12 +33,4 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______,_______ ,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, _______, MO(1) ,_______,_______,_______ ,_______ ,_______,_______, _______,_______,_______,_______ ) -}; - -void encoder_update_user(uint8_t index, bool clockwise) { - if (clockwise) { - tap_code(KC_VOLU); - } else { - tap_code(KC_VOLD); - } -} \ No newline at end of file +}; \ No newline at end of file diff --git a/keyboards/metamechs/timberwolf/keymaps/a_iso/keymap.c b/keyboards/metamechs/timberwolf/keymaps/a_iso/keymap.c index 91d38316280a..78a77d0f83b9 100644 --- a/keyboards/metamechs/timberwolf/keymaps/a_iso/keymap.c +++ b/keyboards/metamechs/timberwolf/keymaps/a_iso/keymap.c @@ -33,12 +33,4 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, _______, MO(1) ,_______,_______,_______ ,_______ ,_______,_______, _______,_______,_______,_______ ) -}; - -void encoder_update_user(uint8_t index, bool clockwise) { - if (clockwise) { - tap_code(KC_VOLU); - } else { - tap_code(KC_VOLD); - } -} \ No newline at end of file +}; \ No newline at end of file diff --git a/keyboards/metamechs/timberwolf/keymaps/b_ansi/keymap.c b/keyboards/metamechs/timberwolf/keymaps/b_ansi/keymap.c index 0b33e2e480b0..9f435715d549 100644 --- a/keyboards/metamechs/timberwolf/keymaps/b_ansi/keymap.c +++ b/keyboards/metamechs/timberwolf/keymaps/b_ansi/keymap.c @@ -33,12 +33,4 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______,_______ ,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______ ,_______, MO(1) ,_______,_______,_______ ,_______ ,_______,_______,_______ ,_______,_______,_______ ) -}; - -void encoder_update_user(uint8_t index, bool clockwise) { - if (clockwise) { - tap_code(KC_VOLU); - } else { - tap_code(KC_VOLD); - } -} \ No newline at end of file +}; \ No newline at end of file diff --git a/keyboards/metamechs/timberwolf/keymaps/b_iso/keymap.c b/keyboards/metamechs/timberwolf/keymaps/b_iso/keymap.c index 137fa4a50750..85217a940b5b 100644 --- a/keyboards/metamechs/timberwolf/keymaps/b_iso/keymap.c +++ b/keyboards/metamechs/timberwolf/keymaps/b_iso/keymap.c @@ -33,12 +33,4 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, MO(1) ,_______,_______,_______ ,_______ ,_______,_______,_______ ,_______,_______,_______ ) -}; - -void encoder_update_user(uint8_t index, bool clockwise) { - if (clockwise) { - tap_code(KC_VOLU); - } else { - tap_code(KC_VOLD); - } -} \ No newline at end of file +}; \ No newline at end of file diff --git a/keyboards/metamechs/timberwolf/keymaps/default/keymap.c b/keyboards/metamechs/timberwolf/keymaps/default/keymap.c index 4870eaa3f51b..85b79f168c56 100644 --- a/keyboards/metamechs/timberwolf/keymaps/default/keymap.c +++ b/keyboards/metamechs/timberwolf/keymaps/default/keymap.c @@ -33,12 +33,4 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, MO(1) ,_______,_______,_______ ,_______ ,_______,_______,_______,_______,_______,_______,_______,_______ ) -}; - -void encoder_update_user(uint8_t index, bool clockwise) { - if (clockwise) { - tap_code(KC_VOLU); - } else { - tap_code(KC_VOLD); - } -} \ No newline at end of file +}; \ No newline at end of file diff --git a/keyboards/metamechs/timberwolf/keymaps/prime_ansi/keymap.c b/keyboards/metamechs/timberwolf/keymaps/prime_ansi/keymap.c index 89c1db021db6..4a49bdf0ade1 100644 --- a/keyboards/metamechs/timberwolf/keymaps/prime_ansi/keymap.c +++ b/keyboards/metamechs/timberwolf/keymaps/prime_ansi/keymap.c @@ -33,12 +33,4 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______,_______ ,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______ ,_______, MO(1) ,_______,_______,_______ ,_______ ,_______,_______,_______ ,_______,_______,_______ ) -}; - -void encoder_update_user(uint8_t index, bool clockwise) { - if (clockwise) { - tap_code(KC_VOLU); - } else { - tap_code(KC_VOLD); - } -} \ No newline at end of file +}; \ No newline at end of file diff --git a/keyboards/metamechs/timberwolf/keymaps/prime_iso/keymap.c b/keyboards/metamechs/timberwolf/keymaps/prime_iso/keymap.c index 5716cdacc710..1818ea4a3b96 100644 --- a/keyboards/metamechs/timberwolf/keymaps/prime_iso/keymap.c +++ b/keyboards/metamechs/timberwolf/keymaps/prime_iso/keymap.c @@ -33,12 +33,4 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, MO(1) ,_______,_______,_______ ,_______ ,_______,_______,_______ ,_______,_______,_______ ) -}; - -void encoder_update_user(uint8_t index, bool clockwise) { - if (clockwise) { - tap_code(KC_VOLU); - } else { - tap_code(KC_VOLD); - } -} \ No newline at end of file +}; \ No newline at end of file diff --git a/keyboards/metamechs/timberwolf/keymaps/via/keymap.c b/keyboards/metamechs/timberwolf/keymaps/via/keymap.c index e19d3bbae777..6246ffd2e283 100644 --- a/keyboards/metamechs/timberwolf/keymaps/via/keymap.c +++ b/keyboards/metamechs/timberwolf/keymaps/via/keymap.c @@ -49,12 +49,4 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______,_______ ,_______ ,_______,_______,_______,_______,_______,_______,_______,_______ ) -}; - -void encoder_update_user(uint8_t index, bool clockwise) { - if (clockwise) { - tap_code(KC_VOLU); - } else { - tap_code(KC_VOLD); - } -} \ No newline at end of file +}; \ No newline at end of file diff --git a/keyboards/metamechs/timberwolf/timberwolf.c b/keyboards/metamechs/timberwolf/timberwolf.c index c9a750f45c9e..af6d42a54ec3 100644 --- a/keyboards/metamechs/timberwolf/timberwolf.c +++ b/keyboards/metamechs/timberwolf/timberwolf.c @@ -27,3 +27,12 @@ bool led_update_kb(led_t led_state) { } return runDefault; } + +__attribute__((weak)) +void encoder_update_user(uint8_t index, bool clockwise) { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } +} diff --git a/keyboards/minimacro5/config.h b/keyboards/minimacro5/config.h new file mode 100644 index 000000000000..b48b5df21ef2 --- /dev/null +++ b/keyboards/minimacro5/config.h @@ -0,0 +1,62 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xCEEB +#define PRODUCT_ID 0x0007 +#define DEVICE_VER 0x0001 +#define MANUFACTURER leafcutterlabs +#define PRODUCT miniMACRO5 + +/* key matrix size */ +#define MATRIX_ROWS 1 +#define MATRIX_COLS 5 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * NO_DIODE = switches are directly connected to AVR pins + * +*/ +// #define MATRIX_ROW_PINS { D0, D5 } +// #define MATRIX_COL_PINS { F1, F0, B0 } +#define DIRECT_PINS { \ + { F4, B6, B2, D7, B4 } \ +} +//speed for double tap +#define TAPPING_TERM 200 + +#define UNUSED_PINS + +/* rotary encoder 1,2,3 closest to usb port is 0*/ +#define ENCODERS_PAD_B { D3, F6, F7, D4, C6} +#define ENCODERS_PAD_A { F5, D2, D1, D0, E6} +#define ENCODER_RESOLUTION 2 //default/suggested + +/* ws2812 RGB LED */ +#define RGB_DI_PIN B5 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 5 // Number of LEDs diff --git a/keyboards/minimacro5/info.json b/keyboards/minimacro5/info.json new file mode 100644 index 000000000000..1cc2a2e41ce3 --- /dev/null +++ b/keyboards/minimacro5/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "minimacro5", + "url": "", + "maintainer": "qmk", + "width": 5, + "height": 1, + "layouts": { + "LAYOUT_ortho_1x5": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":5, "y":0}] + } + } +} diff --git a/keyboards/minimacro5/keymaps/default/keymap.c b/keyboards/minimacro5/keymaps/default/keymap.c new file mode 100644 index 000000000000..acd7f3283110 --- /dev/null +++ b/keyboards/minimacro5/keymaps/default/keymap.c @@ -0,0 +1,46 @@ +#include QMK_KEYBOARD_H + +enum layers { + _MAIN, +}; + +void encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { /* First encoder*/ + if (clockwise) { + tap_code(KC_1); + } else { + tap_code(KC_2); + } + } else if (index == 1) { /* Second encoder*/ + if (clockwise) { + tap_code(KC_3); + } else { + tap_code(KC_4); + } + } else if (index == 2) { /* Third encoder*/ + if (clockwise) { + tap_code(KC_5); + } else { + tap_code(KC_6); + } + } else if (index == 3) { /* Fourth encoder*/ + if (clockwise) { + tap_code(KC_7); + } else { + tap_code(KC_8); + } + } else if (index == 4) { /* Fifth encoder*/ + if (clockwise) { + tap_code(KC_9); + } else { + tap_code(KC_0); + } + } +} + +// +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //buttion closest to usb is first + [_MAIN] = LAYOUT_ortho_1x5( + KC_A, KC_B, KC_C, KC_D, KC_E + ) +}; diff --git a/keyboards/minimacro5/keymaps/media/keymap.c b/keyboards/minimacro5/keymaps/media/keymap.c new file mode 100644 index 000000000000..f36954b07479 --- /dev/null +++ b/keyboards/minimacro5/keymaps/media/keymap.c @@ -0,0 +1,43 @@ +#include QMK_KEYBOARD_H + +#define _MAIN 0 + +void encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { /* First encoder*/ + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } else if (index == 1) { /* Second encoder*/ + if (clockwise) { + tap_code(KC_3); + } else { + tap_code(KC_4); + } + } else if (index == 2) { /* Third encoder*/ + if (clockwise) { + tap_code(KC_5); + } else { + tap_code(KC_6); + } + } else if (index == 3) { /* Fourth encoder*/ + if (clockwise) { + tap_code(KC_7); + } else { + tap_code(KC_8); + } + } else if (index == 4) { /* Fifth encoder*/ + if (clockwise) { + tap_code(KC_9); + } else { + tap_code(KC_0); + } + } +} + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //buttion closest to usb is first + [_MAIN] = LAYOUT_ortho_1x5( + KC_MUTE, KC_MEDIA_PREV_TRACK, KC_MEDIA_NEXT_TRACK, KC_MEDIA_PLAY_PAUSE, KC_MEDIA_STOP + ) +}; diff --git a/keyboards/minimacro5/minimacro5.c b/keyboards/minimacro5/minimacro5.c new file mode 100644 index 000000000000..7f9c5af1c783 --- /dev/null +++ b/keyboards/minimacro5/minimacro5.c @@ -0,0 +1 @@ +#include "minimacro5.h" diff --git a/keyboards/minimacro5/minimacro5.h b/keyboards/minimacro5/minimacro5.h new file mode 100644 index 000000000000..2d61ed893bb1 --- /dev/null +++ b/keyboards/minimacro5/minimacro5.h @@ -0,0 +1,9 @@ +#pragma once + +#include "quantum.h" + +#define LAYOUT_ortho_1x5( \ + k01, k02, k03, k04, k05\ + ) { \ + { k01, k02, k03, k04, k05 } \ +} diff --git a/keyboards/minimacro5/readme.md b/keyboards/minimacro5/readme.md new file mode 100644 index 000000000000..6266d2ba3509 --- /dev/null +++ b/keyboards/minimacro5/readme.md @@ -0,0 +1,15 @@ +# miniMACRO5 + +A 5 key Macropad based on Arduino Pro Micro with support for a combination of rotary encoders and mechanical switches. + +![](https://i.imgur.com/lxA8DSCl.jpg) + +* Keyboard Maintainer: [LeafCutterLabs](https://github.com/LeafCutterLabs) +* Hardware Supported: Pro Micro 5V/16MHz and compatible. +* Hardware availability: PCB Files are available [here](https://github.com/LeafCutterLabs/miniMACRO5), which you can get produced. + +Make example for this keyboard (after setting up your build environment): + + make minimacro5:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/minimacro5/rules.mk b/keyboards/minimacro5/rules.mk new file mode 100644 index 000000000000..dd66c4fbd8c3 --- /dev/null +++ b/keyboards/minimacro5/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output +ENCODER_ENABLE = yes #enable rotary encoders diff --git a/keyboards/misterknife/knife66/chconf.h b/keyboards/misterknife/knife66/chconf.h new file mode 100644 index 000000000000..03f63da36a88 --- /dev/null +++ b/keyboards/misterknife/knife66/chconf.h @@ -0,0 +1,714 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file rt/templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ +#define _CHIBIOS_RT_CONF_VER_6_0_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_ST_RESOLUTION) +#define CH_CFG_ST_RESOLUTION 32 +#endif + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#if !defined(CH_CFG_ST_FREQUENCY) +#define CH_CFG_ST_FREQUENCY 10000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#if !defined(CH_CFG_ST_TIMEDELTA) +#define CH_CFG_ST_TIMEDELTA 2 +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 0 +#endif + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#if !defined(CH_CFG_MEMCORE_SIZE) +#define CH_CFG_MEMCORE_SIZE 0 +#endif + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#if !defined(CH_CFG_NO_IDLE_THREAD) +#define CH_CFG_NO_IDLE_THREAD FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) +#define CH_CFG_OPTIMIZE_SPEED FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_TM) +#define CH_CFG_USE_TM FALSE +#endif + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_REGISTRY) +#define CH_CFG_USE_REGISTRY TRUE +#endif + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_WAITEXIT) +#define CH_CFG_USE_WAITEXIT TRUE +#endif + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_SEMAPHORES) +#define CH_CFG_USE_SEMAPHORES TRUE +#endif + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MUTEXES) +#define CH_CFG_USE_MUTEXES TRUE +#endif + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_CONDVARS) +#define CH_CFG_USE_CONDVARS TRUE +#endif + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE +#endif + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_EVENTS) +#define CH_CFG_USE_EVENTS TRUE +#endif + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MESSAGES) +#define CH_CFG_USE_MESSAGES TRUE +#endif + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_MAILBOXES) +#define CH_CFG_USE_MAILBOXES TRUE +#endif + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMCORE) +#define CH_CFG_USE_MEMCORE TRUE +#endif + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#if !defined(CH_CFG_USE_HEAP) +#define CH_CFG_USE_HEAP FALSE +#endif + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMPOOLS) +#define CH_CFG_USE_MEMPOOLS FALSE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS FALSE +#endif + +/** + * @brief Pipes APIs. + * @details If enabled then the pipes APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_PIPES) +#define CH_CFG_USE_PIPES FALSE +#endif + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#if !defined(CH_CFG_USE_DYNAMIC) +#define CH_CFG_USE_DYNAMIC FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY FALSE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES FALSE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES FALSE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS FALSE +#endif + +/** + * @brief Enables factory for Pipes. + */ +#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) +#define CH_CFG_FACTORY_PIPES FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_STATISTICS) +#define CH_DBG_STATISTICS FALSE +#endif + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) +#define CH_DBG_SYSTEM_STATE_CHECK FALSE +#endif + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS FALSE +#endif + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS FALSE +#endif + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK FALSE +#endif + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS FALSE +#endif + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#if !defined(CH_DBG_THREADS_PROFILING) +#define CH_DBG_THREADS_PROFILING FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p _thread_init() function. + * + * @note It is invoked from within @p _thread_init() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/misterknife/knife66/config.h b/keyboards/misterknife/knife66/config.h new file mode 100644 index 000000000000..0dd85dfdfc8d --- /dev/null +++ b/keyboards/misterknife/knife66/config.h @@ -0,0 +1,55 @@ +/* +Copyright 2015 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xAC11 +#define PRODUCT_ID 0x4172 +#define DEVICE_VER 0x0001 +#define MANUFACTURER MisterKnife +#define PRODUCT Knife66 + +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +#define MATRIX_COL_PINS { B2, B1, B0, A7, A6, A5, A4, B9, B8, B7, B6, B5, B4, B3, A15 } +#define MATRIX_ROW_PINS { B15, A8, A3, A2, A1 } +#define DIODE_DIRECTION COL2ROW + +#define RGB_DI_PIN A9 + +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLIGHT_SLEEP +#define RGBLED_NUM 6 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#define RGBLIGHT_LIMIT_VAL 200 +#endif + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +#define WS2812_PWM_DRIVER PWMD1 // default: PWMD1 +#define WS2812_PWM_CHANNEL 2 // default: 2 +#define WS2812_PWM_PAL_MODE 2 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 +#define WS2812_DMA_STREAM STM32_DMA1_STREAM5 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +#define WS2812_DMA_CHANNEL 5 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. diff --git a/keyboards/misterknife/knife66/halconf.h b/keyboards/misterknife/knife66/halconf.h new file mode 100644 index 000000000000..adb1a907154b --- /dev/null +++ b/keyboards/misterknife/knife66/halconf.h @@ -0,0 +1,525 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#define _CHIBIOS_HAL_CONF_ +#define _CHIBIOS_HAL_CONF_VER_7_0_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C TRUE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM TRUE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SIO subsystem. + */ +#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) +#define HAL_USE_SIO FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI TRUE +#endif + +/** + * @brief Enables the TRNG subsystem. + */ +#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) +#define HAL_USE_TRNG FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/** + * @brief Enables the WSPI subsystem. + */ +#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) +#define HAL_USE_WSPI FALSE +#endif + +/*===========================================================================*/ +/* PAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) +#define PAL_USE_CALLBACKS FALSE +#endif + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) +#define PAL_USE_WAIT FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/** + * @brief Enforces the driver to use direct callbacks rather than OSAL events. + */ +#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) +#define CAN_ENFORCE_USE_CALLBACKS FALSE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* DAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) +#define DAC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define DAC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the zero-copy API. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/** + * @brief OCR initialization constant for V20 cards. + */ +#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) +#define SDC_INIT_OCR_V20 0x50FF8000U +#endif + +/** + * @brief OCR initialization constant for non-V20 cards. + */ +#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) +#define SDC_INIT_OCR 0x80100000U +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 1 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables circular transfers APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) +#define SPI_USE_CIRCULAR FALSE +#endif + + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/** + * @brief Handling method for SPI CS line. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) +#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +/*===========================================================================*/ +/* WSPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) +#define WSPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define WSPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/keyboards/misterknife/knife66/info.json b/keyboards/misterknife/knife66/info.json new file mode 100644 index 000000000000..3f61398c6379 --- /dev/null +++ b/keyboards/misterknife/knife66/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "Knife66", + "url": "", + "maintainer": "qmk", + "width": 16.5, + "height": 5.25, + "layouts": { + "LAYOUT_all": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15.5, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15.5, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15.5, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14.25, "y":3.25}, {"x":15.5, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":2.25, "y":4}, {"x":3.25, "y":4, "w":1.25}, {"x":4.5, "y":4, "w":2.25}, {"x":6.75, "y":4, "w":2.75}, {"x":9.5, "y":4, "w":1.25}, {"x":10.75, "y":4}, {"x":11.75, "y":4, "w":1.25}, {"x":13.25, "y":4.25}, {"x":14.25, "y":4.25}, {"x":15.25, "y":4.25}] + } + } +} diff --git a/keyboards/misterknife/knife66/keymaps/default/keymap.c b/keyboards/misterknife/knife66/keymaps/default/keymap.c new file mode 100644 index 000000000000..831efca1779d --- /dev/null +++ b/keyboards/misterknife/knife66/keymaps/default/keymap.c @@ -0,0 +1,39 @@ +/* +Copyright 2012,2013 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_all( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGDN, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_HOME, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + MO(1), KC_LALT, KC_LGUI, KC_LGUI, LT(1, KC_SPC), KC_LGUI, MO(1), KC_LGUI, KC_LEFT, KC_DOWN, KC_RGHT ), + + [_FN] = LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_DEL, RGB_TOG, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MPRV, KC_MNXT, KC_TRNS, RGB_MOD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT,KC_TRNS, KC_TRNS, KC_INS, RGB_SPI, + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, RGB_SPD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_TRNS ), +}; diff --git a/keyboards/misterknife/knife66/knife66.c b/keyboards/misterknife/knife66/knife66.c new file mode 100644 index 000000000000..0e261b3a81eb --- /dev/null +++ b/keyboards/misterknife/knife66/knife66.c @@ -0,0 +1,17 @@ +/* Copyright 2020 Thierry Kleist + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + + #include "knife66.h" diff --git a/keyboards/misterknife/knife66/knife66.h b/keyboards/misterknife/knife66/knife66.h new file mode 100644 index 000000000000..8868aa3aef02 --- /dev/null +++ b/keyboards/misterknife/knife66/knife66.h @@ -0,0 +1,35 @@ +/* Copyright 2020 Thierry Kleist + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define ____ KC_NO + +#define LAYOUT_all( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K114, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K214, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K314, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K414, \ + K400, K401, K402, K404, K405, K407, K408, K409, K410, K412, K413 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, ____, K214 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, ____, K314 }, \ + { K400, K401, K402, ____, K404, K405, ____, K407, K408, K409, K410, ____, K412, K413, K414 } \ +} diff --git a/keyboards/misterknife/knife66/mcuconf.h b/keyboards/misterknife/knife66/mcuconf.h new file mode 100644 index 000000000000..00292cab1f6d --- /dev/null +++ b/keyboards/misterknife/knife66/mcuconf.h @@ -0,0 +1,176 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +/* + * STM32F0xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 3...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F0xx_MCUCONF +// #define STM32F070xB + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_HSI14_ENABLED TRUE +#define STM32_HSI48_ENABLED FALSE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED FALSE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 12 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE STM32_PPRE_DIV1 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_USBSW STM32_USBSW_HSI48 +#define STM32_CECSW STM32_CECSW_HSI +#define STM32_I2C1SW STM32_I2C1SW_HSI +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_RTCSEL STM32_RTCSEL_LSI + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 2 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 2 +#define STM32_GPT_TIM2_IRQ_PRIORITY 2 +#define STM32_GPT_TIM3_IRQ_PRIORITY 2 +#define STM32_GPT_TIM14_IRQ_PRIORITY 2 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 TRUE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 3 +#define STM32_I2C_I2C2_IRQ_PRIORITY 3 +#define STM32_I2C_USE_DMA TRUE +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 3 +#define STM32_ICU_TIM2_IRQ_PRIORITY 3 +#define STM32_ICU_TIM3_IRQ_PRIORITY 3 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 TRUE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 3 +#define STM32_PWM_TIM2_IRQ_PRIORITY 3 +#define STM32_PWM_TIM3_IRQ_PRIORITY 3 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USART1_PRIORITY 3 +#define STM32_SERIAL_USART2_PRIORITY 3 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 TRUE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 2 +#define STM32_SPI_SPI2_IRQ_PRIORITY 2 +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 2 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 3 +#define STM32_UART_USART2_IRQ_PRIORITY 3 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 TRUE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 + +#endif /* _MCUCONF_H_ */ diff --git a/keyboards/misterknife/knife66/readme.md b/keyboards/misterknife/knife66/readme.md new file mode 100644 index 000000000000..3ced6adafd1d --- /dev/null +++ b/keyboards/misterknife/knife66/readme.md @@ -0,0 +1,18 @@ +# Knife66 + +![Knife66](https://i.imgur.com/p7G2g81l.png) + +This is a replacement board for the CA66 keyboard + +* Keyboard Maintainer: [afewyards](https://github.com/afewyards) +* Hardware Availability: [Geekhack](https://geekhack.org/index.php?topic=107331.0) + +Make example for this keyboard (after setting up your build environment): + + make misterknife/knife66:default + +Flashing example for this keyboard: + + make misterknife/knife66:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/misterknife/knife66/rules.mk b/keyboards/misterknife/knife66/rules.mk new file mode 100644 index 000000000000..540a423f2e4b --- /dev/null +++ b/keyboards/misterknife/knife66/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = STM32F072 + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output + +# Enter lower-power sleep mode when on the ChibiOS idle thread +OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE +WS2812_DRIVER = pwm diff --git a/keyboards/mysticworks/wyvern/config.h b/keyboards/mysticworks/wyvern/config.h new file mode 100644 index 000000000000..82b4939fcf8d --- /dev/null +++ b/keyboards/mysticworks/wyvern/config.h @@ -0,0 +1,46 @@ +/* Copyright 2020 Albert Dong + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device Descriptor Parameter */ +#define VENDOR_ID 0x4D59 // "MY" - Mystic Works +#define PRODUCT_ID 0x0001 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Mystic Works +#define PRODUCT Wyvern + +/* Key Matrix Size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 10 + +/* Keyboard Matrix Assignments */ +#define MATRIX_ROW_PINS {D0,D1,D5,D3,F7,F6,F5,F4,F1,F0} +#define MATRIX_COL_PINS {E6,B0,D4,D6,D7,B4,B5,B6,C6,C7} +#define UNUSED_PINS {B7,D2} + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE diff --git a/keyboards/mysticworks/wyvern/info.json b/keyboards/mysticworks/wyvern/info.json new file mode 100644 index 000000000000..ccf2e6d6e687 --- /dev/null +++ b/keyboards/mysticworks/wyvern/info.json @@ -0,0 +1,477 @@ +{ + "keyboard_name": "Wyvern", + "url": "https://mysticworks.xyz", + "maintainer": "mysticworks", + "width": 20.75, + "height": 5.25, + "layouts": { + "LAYOUT_all": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4.25, "y":0}, + {"x":5.25, "y":0}, + {"x":6.25, "y":0}, + {"x":7.25, "y":0}, + {"x":8.25, "y":0}, + {"x":9.25, "y":0}, + {"x":10.25, "y":0}, + {"x":11.25, "y":0}, + {"x":12.25, "y":0}, + {"x":13.25, "y":0}, + {"x":14.25, "y":0}, + {"x":15.25, "y":0}, + {"x":16.25, "y":0}, + {"x":17.25, "y":0}, + {"x":18.25, "y":0}, + {"x":19.75, "y":0}, + + {"x":0, "y":1}, + {"x":1, "y":1}, + {"x":2, "y":1}, + {"x":3, "y":1}, + {"x":4.25, "y":1, "w":1.5}, + {"x":5.75, "y":1}, + {"x":6.75, "y":1}, + {"x":7.75, "y":1}, + {"x":8.75, "y":1}, + {"x":9.75, "y":1}, + {"x":10.75, "y":1}, + {"x":11.75, "y":1}, + {"x":12.75, "y":1}, + {"x":13.75, "y":1}, + {"x":14.75, "y":1}, + {"x":15.75, "y":1}, + {"x":16.75, "y":1}, + {"x":17.75, "y":1, "w":1.5}, + {"x":19.75, "y":1}, + + {"x":0, "y":2}, + {"x":1, "y":2}, + {"x":2, "y":2}, + {"x":3, "y":2}, + {"x":4.25, "y":2, "w":1.75}, + {"x":6, "y":2}, + {"x":7, "y":2}, + {"x":8, "y":2}, + {"x":9, "y":2}, + {"x":10, "y":2}, + {"x":11, "y":2}, + {"x":12, "y":2}, + {"x":13, "y":2}, + {"x":14, "y":2}, + {"x":15, "y":2}, + {"x":16, "y":2}, + {"x":17, "y":2}, + {"x":18, "y":2, "w":1.25}, + {"x":19.75, "y":2}, + + {"x":0, "y":3}, + {"x":1, "y":3}, + {"x":2, "y":3}, + {"x":3, "y":3}, + {"x":4.25, "y":3, "w":1.25}, + {"x":5.5, "y":3}, + {"x":6.5, "y":3}, + {"x":7.5, "y":3}, + {"x":8.5, "y":3}, + {"x":9.5, "y":3}, + {"x":10.5, "y":3}, + {"x":11.5, "y":3}, + {"x":12.5, "y":3}, + {"x":13.5, "y":3}, + {"x":14.5, "y":3}, + {"x":15.5, "y":3}, + {"x":16.5, "y":3, "w":1.75}, + {"x":18.5, "y":3.25}, + {"x":19.75, "y":3}, + + {"x":0, "y":4}, + {"x":1, "y":4}, + {"x":2, "y":4}, + {"x":3, "y":4}, + {"x":4.25, "y":4, "w":1.25}, + {"x":5.5, "y":4, "w":1.25}, + {"x":6.75, "y":4, "w":1.25}, + {"x":8, "y":4, "w":6.25}, + {"x":14.25, "y":4, "w":1.5}, + {"x":15.75, "y":4, "w":1.5}, + {"x":17.5, "y":4.25}, + {"x":18.5, "y":4.25}, + {"x":19.5, "y":4.25} + ] + }, + "LAYOUT_ansi_numpad_right": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4.25, "y":0}, + {"x":5.25, "y":0}, + {"x":6.25, "y":0}, + {"x":7.25, "y":0}, + {"x":8.25, "y":0}, + {"x":9.25, "y":0}, + {"x":10.25, "y":0}, + {"x":11.25, "y":0}, + {"x":12.25, "y":0}, + {"x":13.25, "y":0}, + {"x":14.25, "y":0}, + {"x":15.25, "y":0}, + {"x":16.25, "y":0}, + {"x":17.25, "y":0, "w":2}, + {"x":19.75, "y":0}, + + {"x":0, "y":1}, + {"x":1, "y":1}, + {"x":2, "y":1}, + {"x":3, "y":1, "h":2}, + {"x":4.25, "y":1, "w":1.5}, + {"x":5.75, "y":1}, + {"x":6.75, "y":1}, + {"x":7.75, "y":1}, + {"x":8.75, "y":1}, + {"x":9.75, "y":1}, + {"x":10.75, "y":1}, + {"x":11.75, "y":1}, + {"x":12.75, "y":1}, + {"x":13.75, "y":1}, + {"x":14.75, "y":1}, + {"x":15.75, "y":1}, + {"x":16.75, "y":1}, + {"x":17.75, "y":1, "w":1.5}, + {"x":19.75, "y":1}, + + {"x":0, "y":2}, + {"x":1, "y":2}, + {"x":2, "y":2}, + {"x":4.25, "y":2, "w":1.75}, + {"x":6, "y":2}, + {"x":7, "y":2}, + {"x":8, "y":2}, + {"x":9, "y":2}, + {"x":10, "y":2}, + {"x":11, "y":2}, + {"x":12, "y":2}, + {"x":13, "y":2}, + {"x":14, "y":2}, + {"x":15, "y":2}, + {"x":16, "y":2}, + {"x":17, "y":2, "w":2.25}, + {"x":19.75, "y":2}, + + {"x":0, "y":3}, + {"x":1, "y":3}, + {"x":2, "y":3}, + {"x":3, "y":3, "h":2}, + {"x":4.25, "y":3, "w":2.25}, + {"x":6.5, "y":3}, + {"x":7.5, "y":3}, + {"x":8.5, "y":3}, + {"x":9.5, "y":3}, + {"x":10.5, "y":3}, + {"x":11.5, "y":3}, + {"x":12.5, "y":3}, + {"x":13.5, "y":3}, + {"x":14.5, "y":3}, + {"x":15.5, "y":3}, + {"x":16.5, "y":3, "w":1.75}, + {"x":18.5, "y":3.25}, + {"x":19.75, "y":3}, + + {"x":0, "y":4, "w":2}, + {"x":2, "y":4}, + {"x":4.25, "y":4, "w":1.25}, + {"x":5.5, "y":4, "w":1.25}, + {"x":6.75, "y":4, "w":1.25}, + {"x":8, "y":4, "w":6.25}, + {"x":14.25, "y":4, "w":1.5}, + {"x":15.75, "y":4, "w":1.5}, + {"x":17.5, "y":4.25}, + {"x":18.5, "y":4.25}, + {"x":19.5, "y":4.25} + ] + }, + "LAYOUT_ansi_numpad_left": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4.25, "y":0}, + {"x":5.25, "y":0}, + {"x":6.25, "y":0}, + {"x":7.25, "y":0}, + {"x":8.25, "y":0}, + {"x":9.25, "y":0}, + {"x":10.25, "y":0}, + {"x":11.25, "y":0}, + {"x":12.25, "y":0}, + {"x":13.25, "y":0}, + {"x":14.25, "y":0}, + {"x":15.25, "y":0}, + {"x":16.25, "y":0}, + {"x":17.25, "y":0, "w":2}, + {"x":19.75, "y":0}, + + {"x":0, "y":1, "h":2}, + {"x":1, "y":1}, + {"x":2, "y":1}, + {"x":3, "y":1}, + {"x":4.25, "y":1, "w":1.5}, + {"x":5.75, "y":1}, + {"x":6.75, "y":1}, + {"x":7.75, "y":1}, + {"x":8.75, "y":1}, + {"x":9.75, "y":1}, + {"x":10.75, "y":1}, + {"x":11.75, "y":1}, + {"x":12.75, "y":1}, + {"x":13.75, "y":1}, + {"x":14.75, "y":1}, + {"x":15.75, "y":1}, + {"x":16.75, "y":1}, + {"x":17.75, "y":1, "w":1.5}, + {"x":19.75, "y":1}, + + {"x":1, "y":2}, + {"x":2, "y":2}, + {"x":3, "y":2}, + {"x":4.25, "y":2, "w":1.75}, + {"x":6, "y":2}, + {"x":7, "y":2}, + {"x":8, "y":2}, + {"x":9, "y":2}, + {"x":10, "y":2}, + {"x":11, "y":2}, + {"x":12, "y":2}, + {"x":13, "y":2}, + {"x":14, "y":2}, + {"x":15, "y":2}, + {"x":16, "y":2}, + {"x":17, "y":2, "w":2.25}, + {"x":19.75, "y":2}, + + {"x":0, "y":3, "h":2}, + {"x":1, "y":3}, + {"x":2, "y":3}, + {"x":3, "y":3}, + {"x":4.25, "y":3, "w":2.25}, + {"x":6.5, "y":3}, + {"x":7.5, "y":3}, + {"x":8.5, "y":3}, + {"x":9.5, "y":3}, + {"x":10.5, "y":3}, + {"x":11.5, "y":3}, + {"x":12.5, "y":3}, + {"x":13.5, "y":3}, + {"x":14.5, "y":3}, + {"x":15.5, "y":3}, + {"x":16.5, "y":3, "w":1.75}, + {"x":18.5, "y":3.25}, + {"x":19.75, "y":3}, + + {"x":1, "y":4}, + {"x":2, "y":4, "w":2}, + {"x":4.25, "y":4, "w":1.25}, + {"x":5.5, "y":4, "w":1.25}, + {"x":6.75, "y":4, "w":1.25}, + {"x":8, "y":4, "w":6.25}, + {"x":14.25, "y":4, "w":1.5}, + {"x":15.75, "y":4, "w":1.5}, + {"x":17.5, "y":4.25}, + {"x":18.5, "y":4.25}, + {"x":19.5, "y":4.25} + ] + }, + "LAYOUT_iso_numpad_right": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4.25, "y":0}, + {"x":5.25, "y":0}, + {"x":6.25, "y":0}, + {"x":7.25, "y":0}, + {"x":8.25, "y":0}, + {"x":9.25, "y":0}, + {"x":10.25, "y":0}, + {"x":11.25, "y":0}, + {"x":12.25, "y":0}, + {"x":13.25, "y":0}, + {"x":14.25, "y":0}, + {"x":15.25, "y":0}, + {"x":16.25, "y":0}, + {"x":17.25, "y":0, "w":2}, + {"x":19.75, "y":0}, + + {"x":0, "y":1}, + {"x":1, "y":1}, + {"x":2, "y":1}, + {"x":3, "y":1, "h":2}, + {"x":4.25, "y":1, "w":1.5}, + {"x":5.75, "y":1}, + {"x":6.75, "y":1}, + {"x":7.75, "y":1}, + {"x":8.75, "y":1}, + {"x":9.75, "y":1}, + {"x":10.75, "y":1}, + {"x":11.75, "y":1}, + {"x":12.75, "y":1}, + {"x":13.75, "y":1}, + {"x":14.75, "y":1}, + {"x":15.75, "y":1}, + {"x":16.75, "y":1}, + {"x":19.75, "y":1}, + + {"x":0, "y":2}, + {"x":1, "y":2}, + {"x":2, "y":2}, + {"x":4.25, "y":2, "w":1.75}, + {"x":6, "y":2}, + {"x":7, "y":2}, + {"x":8, "y":2}, + {"x":9, "y":2}, + {"x":10, "y":2}, + {"x":11, "y":2}, + {"x":12, "y":2}, + {"x":13, "y":2}, + {"x":14, "y":2}, + {"x":15, "y":2}, + {"x":16, "y":2}, + {"x":17, "y":2}, + {"x":18, "y":1, "w":1.25, "h":2}, + {"x":19.75, "y":2}, + + {"x":0, "y":3}, + {"x":1, "y":3}, + {"x":2, "y":3}, + {"x":3, "y":3, "h":2}, + {"x":4.25, "y":3, "w":1.25}, + {"x":5.5, "y":3}, + {"x":6.5, "y":3}, + {"x":7.5, "y":3}, + {"x":8.5, "y":3}, + {"x":9.5, "y":3}, + {"x":10.5, "y":3}, + {"x":11.5, "y":3}, + {"x":12.5, "y":3}, + {"x":13.5, "y":3}, + {"x":14.5, "y":3}, + {"x":15.5, "y":3}, + {"x":16.5, "y":3, "w":1.75}, + {"x":18.5, "y":3.25}, + {"x":19.75, "y":3}, + + {"x":0, "y":4, "w":2}, + {"x":2, "y":4}, + {"x":4.25, "y":4, "w":1.25}, + {"x":5.5, "y":4, "w":1.25}, + {"x":6.75, "y":4, "w":1.25}, + {"x":8, "y":4, "w":6.25}, + {"x":14.25, "y":4, "w":1.5}, + {"x":15.75, "y":4, "w":1.5}, + {"x":17.5, "y":4.25}, + {"x":18.5, "y":4.25}, + {"x":19.5, "y":4.25} + ] + }, + "LAYOUT_iso_numpad_left": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4.25, "y":0}, + {"x":5.25, "y":0}, + {"x":6.25, "y":0}, + {"x":7.25, "y":0}, + {"x":8.25, "y":0}, + {"x":9.25, "y":0}, + {"x":10.25, "y":0}, + {"x":11.25, "y":0}, + {"x":12.25, "y":0}, + {"x":13.25, "y":0}, + {"x":14.25, "y":0}, + {"x":15.25, "y":0}, + {"x":16.25, "y":0}, + {"x":17.25, "y":0, "w":2}, + {"x":19.75, "y":0}, + + {"x":0, "y":1, "h":2}, + {"x":1, "y":1}, + {"x":2, "y":1}, + {"x":3, "y":1}, + {"x":4.25, "y":1, "w":1.5}, + {"x":5.75, "y":1}, + {"x":6.75, "y":1}, + {"x":7.75, "y":1}, + {"x":8.75, "y":1}, + {"x":9.75, "y":1}, + {"x":10.75, "y":1}, + {"x":11.75, "y":1}, + {"x":12.75, "y":1}, + {"x":13.75, "y":1}, + {"x":14.75, "y":1}, + {"x":15.75, "y":1}, + {"x":16.75, "y":1}, + {"x":19.75, "y":1}, + + {"x":1, "y":2}, + {"x":2, "y":2}, + {"x":3, "y":2}, + {"x":4.25, "y":2, "w":1.75}, + {"x":6, "y":2}, + {"x":7, "y":2}, + {"x":8, "y":2}, + {"x":9, "y":2}, + {"x":10, "y":2}, + {"x":11, "y":2}, + {"x":12, "y":2}, + {"x":13, "y":2}, + {"x":14, "y":2}, + {"x":15, "y":2}, + {"x":16, "y":2}, + {"x":17, "y":2}, + {"x":18, "y":1, "w":1.25, "h":2}, + {"x":19.75, "y":2}, + + {"x":0, "y":3, "h":2}, + {"x":1, "y":3}, + {"x":2, "y":3}, + {"x":3, "y":3}, + {"x":4.25, "y":3, "w":1.25}, + {"x":5.5, "y":3}, + {"x":6.5, "y":3}, + {"x":7.5, "y":3}, + {"x":8.5, "y":3}, + {"x":9.5, "y":3}, + {"x":10.5, "y":3}, + {"x":11.5, "y":3}, + {"x":12.5, "y":3}, + {"x":13.5, "y":3}, + {"x":14.5, "y":3}, + {"x":15.5, "y":3}, + {"x":16.5, "y":3, "w":1.75}, + {"x":18.5, "y":3.25}, + {"x":19.75, "y":3}, + + {"x":1, "y":4}, + {"x":2, "y":4, "w":2}, + {"x":4.25, "y":4, "w":1.25}, + {"x":5.5, "y":4, "w":1.25}, + {"x":6.75, "y":4, "w":1.25}, + {"x":8, "y":4, "w":6.25}, + {"x":14.25, "y":4, "w":1.5}, + {"x":15.75, "y":4, "w":1.5}, + {"x":17.5, "y":4.25}, + {"x":18.5, "y":4.25}, + {"x":19.5, "y":4.25} + ] + } + } +} \ No newline at end of file diff --git a/keyboards/mysticworks/wyvern/keymaps/default/keymap.c b/keyboards/mysticworks/wyvern/keymaps/default/keymap.c new file mode 100644 index 000000000000..9c927e7f2a38 --- /dev/null +++ b/keyboards/mysticworks/wyvern/keymaps/default/keymap.c @@ -0,0 +1,33 @@ +/* Copyright 2020 Albert Dong + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_DEL, + KC_P7, KC_P8, KC_P9, KC_PPLS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_P4, KC_P5, KC_P6, KC_PPLS, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT, KC_PGDN, + KC_P1, KC_P2, KC_P3, KC_PENT, KC_LSFT, KC_NUHS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1), + KC_P0, KC_P0, KC_PDOT, KC_PENT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_all( + _______, _______, _______, _______, RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; \ No newline at end of file diff --git a/keyboards/mysticworks/wyvern/keymaps/default/readme.md b/keyboards/mysticworks/wyvern/keymaps/default/readme.md new file mode 100644 index 000000000000..1d4604ba5d7b --- /dev/null +++ b/keyboards/mysticworks/wyvern/keymaps/default/readme.md @@ -0,0 +1,3 @@ +# Wyvern Default Keymap + +Default keymap for Wyvern- Normal numpad, ANSI layout with 6.25u. F-keys on second layer. diff --git a/keyboards/mysticworks/wyvern/keymaps/via/keymap.c b/keyboards/mysticworks/wyvern/keymaps/via/keymap.c new file mode 100644 index 000000000000..d92fb562e298 --- /dev/null +++ b/keyboards/mysticworks/wyvern/keymaps/via/keymap.c @@ -0,0 +1,47 @@ +/* Copyright 2020 Albert Dong + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_DEL, + KC_P7, KC_P8, KC_P9, KC_PPLS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_P4, KC_P5, KC_P6, KC_PPLS, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT, KC_PGDN, + KC_P1, KC_P2, KC_P3, KC_PENT, KC_LSFT, KC_NUHS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1), + KC_P0, KC_P0, KC_PDOT, KC_PENT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_all( + _______, _______, _______, _______, RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [3] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; \ No newline at end of file diff --git a/keyboards/mysticworks/wyvern/keymaps/via/readme.md b/keyboards/mysticworks/wyvern/keymaps/via/readme.md new file mode 100644 index 000000000000..02b3ae2a6efd --- /dev/null +++ b/keyboards/mysticworks/wyvern/keymaps/via/readme.md @@ -0,0 +1,3 @@ +# Wyvern VIA Keymap + +Keymap for VIA Configurator usage- supports all layouts possible. diff --git a/keyboards/mysticworks/wyvern/keymaps/via/rules.mk b/keyboards/mysticworks/wyvern/keymaps/via/rules.mk new file mode 100644 index 000000000000..36b7ba9cbc98 --- /dev/null +++ b/keyboards/mysticworks/wyvern/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/mysticworks/wyvern/readme.md b/keyboards/mysticworks/wyvern/readme.md new file mode 100644 index 000000000000..6587d72bfd16 --- /dev/null +++ b/keyboards/mysticworks/wyvern/readme.md @@ -0,0 +1,18 @@ +# Wyvern + +A 65% + Southpaw Numpad designed and sold by [Mystic Works](https://mysticworks.xyz). + +## Support +* Keyboard Maintainer: [mysticworks](https://github.com/mysticworks) +* Hardware Supported: Wyvern +* Hardware Availability: Will be posted [here](https://mysticworks.xyz/) + +Make example for this keyboard (after setting up your build environment): + + make mysticworks/wyvern:default + +Flashing example for this keyboard: + + make mysticworks/wyvern:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/mysticworks/wyvern/rules.mk b/keyboards/mysticworks/wyvern/rules.mk new file mode 100644 index 000000000000..6bd8b89327ed --- /dev/null +++ b/keyboards/mysticworks/wyvern/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = qmk-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/mysticworks/wyvern/wyvern.c b/keyboards/mysticworks/wyvern/wyvern.c new file mode 100644 index 000000000000..015fb5ff05c6 --- /dev/null +++ b/keyboards/mysticworks/wyvern/wyvern.c @@ -0,0 +1,17 @@ +/* Copyright 2020 Albert Dong + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "wyvern.h" + diff --git a/keyboards/mysticworks/wyvern/wyvern.h b/keyboards/mysticworks/wyvern/wyvern.h new file mode 100644 index 000000000000..ea5b4b305eac --- /dev/null +++ b/keyboards/mysticworks/wyvern/wyvern.h @@ -0,0 +1,129 @@ +/* Copyright 2020 Albert Dong + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define XXX KC_NO + +#define LAYOUT_all( \ + k00, k10, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k16, k07, k17, k08, k18, k09, k19, \ + k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k36, k27, k37, k28, k29, k39, \ + k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k56, k47, k57, k58, k49, k59, \ + k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k76, k67, k77, k68, k69, k79, \ + k80, k90, k81, k91, k82, k92, k83, k85, k87, k97, k98, k89, k99 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19 }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, XXX, k39 }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, XXX, k49 }, \ + { k50, k51, k52, k53, k54, k55, k56, k57, k58, k59 }, \ + { k60, k61, k62, k63, k64, k65, k66, k67, k68, k69 }, \ + { k70, k71, k72, k73, k74, k75, k76, k77, XXX, k79 }, \ + { k80, k81, k82, k83, XXX, k85, XXX, k87, XXX, k89 }, \ + { k90, k91, k92, XXX, XXX, XXX, XXX, k97, k98, k99 } \ +} + +#define LAYOUT_ansi_numpad_right( \ + k00, k10, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k16, k07, k17, k08, k09, k19, \ + k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k36, k27, k37, k28, k29, k39, \ + k40, k50, k41, k42, k52, k43, k53, k44, k54, k45, k55, k46, k56, k47, k57, k49, k59, \ + k60, k70, k61, k71, k62, k63, k73, k64, k74, k65, k75, k66, k76, k67, k77, k68, k69, k79, \ + k80, k81, k82, k92, k83, k85, k87, k97, k98, k89, k99 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, XXX, k19 }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, XXX, k39 }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, XXX, k49 }, \ + { k50, XXX, k52, k53, k54, k55, k56, k57, XXX, k59 }, \ + { k60, k61, k62, k63, k64, k65, k66, k67, k68, k69 }, \ + { k70, k71, k72, k73, k74, k75, k76, k77, XXX, k79 }, \ + { k80, k81, k82, k83, XXX, k85, XXX, k87, XXX, k89 }, \ + { XXX, XXX, k92, XXX, XXX, XXX, XXX, k97, k98, k99 } \ +} + +#define LAYOUT_ansi_numpad_left( \ + k00, k10, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k16, k07, k17, k08, k09, k19, \ + k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k36, k27, k37, k28, k29, k39, \ + k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k56, k47, k57, k49, k59, \ + k60, k70, k61, k71, k62, k63, k73, k64, k74, k65, k75, k66, k76, k67, k77, k68, k69, k79, \ + k90, k91, k82, k92, k83, k85, k87, k97, k98, k89, k99 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, XXX, k19 }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, XXX, k39 }, \ + { XXX, k41, k42, k43, k44, k45, k46, k47, XXX, k49 }, \ + { k50, k51, k52, k53, k54, k55, k56, k57, XXX, k59 }, \ + { k60, k61, k62, k63, k64, k65, k66, k67, k68, k69 }, \ + { k70, k71, XXX, k73, k74, k75, k76, k77, XXX, k79 }, \ + { XXX, XXX, k82, k83, XXX, k85, XXX, k87, XXX, k89 }, \ + { k90, k91, k92, XXX, XXX, XXX, XXX, k97, k98, k99 } \ +} + +#define LAYOUT_iso_numpad_right( \ + k00, k10, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k16, k07, k17, k08, k09, k19, \ + k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k36, k27, k37, k28, k39, \ + k40, k50, k41, k42, k52, k43, k53, k44, k54, k45, k55, k46, k56, k47, k57, k58, k49, k59, \ + k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k76, k67, k77, k68, k69, k79, \ + k80, k81, k82, k92, k83, k85, k87, k97, k98, k89, k99 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, XXX, k19 }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, XXX }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, XXX, k39 }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, XXX, k49 }, \ + { k50, XXX, k52, k53, k54, k55, k56, k57, k58, k59 }, \ + { k60, k61, k62, k63, k64, k65, k66, k67, k68, k69 }, \ + { k70, k71, k72, k73, k74, k75, k76, k77, XXX, k79 }, \ + { k80, k81, k82, k83, XXX, k85, XXX, k87, XXX, k89 }, \ + { XXX, XXX, k92, XXX, XXX, XXX, XXX, k97, k98, k99 } \ +} + +#define LAYOUT_iso_numpad_left( \ + k00, k10, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k16, k07, k17, k08, k09, k19, \ + k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k36, k27, k37, k28, k39, \ + k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k56, k47, k57, k58, k49, k59, \ + k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k76, k67, k77, k68, k69, k79, \ + k90, k91, k82, k92, k83, k85, k87, k97, k98, k89, k99 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, XXX, k19 }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, XXX }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, XXX, k39 }, \ + { XXX, k41, k42, k43, k44, k45, k46, k47, XXX, k49 }, \ + { k50, k51, k52, k53, k54, k55, k56, k57, k58, k59 }, \ + { k60, k61, k62, k63, k64, k65, k66, k67, k68, k69 }, \ + { k70, k71, k72, k73, k74, k75, k76, k77, XXX, k79 }, \ + { XXX, XXX, k82, k83, XXX, k85, XXX, k87, XXX, k89 }, \ + { k90, k91, k92, XXX, XXX, XXX, XXX, k97, k98, k99 } \ +} diff --git a/keyboards/pabile/p18/config.h b/keyboards/pabile/p18/config.h index f7c258a56540..d8d5a95f2d0b 100644 --- a/keyboards/pabile/p18/config.h +++ b/keyboards/pabile/p18/config.h @@ -1,3 +1,21 @@ +/* +Copyright 2020 Pabile + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + + #pragma once #include "config_common.h" diff --git a/keyboards/pabile/p20/config.h b/keyboards/pabile/p20/config.h deleted file mode 100644 index 8a52c1bf1c50..000000000000 --- a/keyboards/pabile/p20/config.h +++ /dev/null @@ -1,26 +0,0 @@ -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0x6666 -#define PRODUCT_ID 0x6667 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Pabile -#define PRODUCT P20 -#define DESCRIPTION 5x4 Macropad - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 4 - -/* pin-out */ -#define MATRIX_ROW_PINS { B3, B4, B5, D7, E6 } -#define MATRIX_COL_PINS { D0, B2, D4, B6 } -#define UNUSED_PINS - -#define ENCODERS_PAD_A { F5, F7 } -#define ENCODERS_PAD_B { F6, B1 } - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW diff --git a/keyboards/pabile/p20/p20.c b/keyboards/pabile/p20/p20.c deleted file mode 100644 index c17efac9b162..000000000000 --- a/keyboards/pabile/p20/p20.c +++ /dev/null @@ -1 +0,0 @@ -#include "p20.h" diff --git a/keyboards/pabile/p20/p20.h b/keyboards/pabile/p20/p20.h deleted file mode 100644 index b7467dc150ec..000000000000 --- a/keyboards/pabile/p20/p20.h +++ /dev/null @@ -1,18 +0,0 @@ -#pragma once - -#include "quantum.h" - -#define LAYOUT_ortho_5x4( \ - k00, k01, k02, k03, \ - k10, k11, k12, k13, \ - k20, k21, k22, k23, \ - k30, k31, k32, k33, \ - k40, k41, k42, k43 \ -) \ -{ \ - {k00, k01, k02, k03}, \ - {k10, k11, k12, k13}, \ - {k20, k21, k22, k23}, \ - {k30, k31, k32, k33}, \ - {k40, k41, k42, k43} \ -} diff --git a/keyboards/pabile/p20/readme.md b/keyboards/pabile/p20/readme.md index 256a4772ecd5..e94005b0d4db 100644 --- a/keyboards/pabile/p20/readme.md +++ b/keyboards/pabile/p20/readme.md @@ -1,16 +1,16 @@ # P20 ![Linear grid](https://github.com/pabile/Pabile20/blob/master/_bak/layout-grid.jpg) -![Numeric pad](https://github.com/pabile/Pabile20/blob/master/_bak/layout-numpad.jpg) -A 5x4 grid keyboard with 2 rotary encoders. +A 5x4 grid macro numeric pad with up to 3 optional rotary encoders. * Keyboard Maintainer: [pabile](https://github.com/pabile) -* Hardware Supported: Pabile P20 PCB, Pro Micro -* Hardware Availability: [Info at pabileonline.blogspot.com](https://pabileonline.blogspot.com/search/label/pabile20) +* Hardware Supported: Pabile P20 PCB, Pro Micro, Rotary Encoders, Alps/MX Switches +* Hardware Availability: [pabileonline.blogspot.com](https://pabileonline.blogspot.com/search/label/p20) Make example for this keyboard (after setting up your build environment): - make pabile/p20:default + make pabile/p20/ver1:default # for ver1 + make pabile/p20/ver2:default # for ver2 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/pabile/p20/ver1/config.h b/keyboards/pabile/p20/ver1/config.h new file mode 100644 index 000000000000..94c600106b06 --- /dev/null +++ b/keyboards/pabile/p20/ver1/config.h @@ -0,0 +1,42 @@ +/* +Copyright 2020 Pabile + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x6666 +#define PRODUCT_ID 0x6667 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Pabile +#define PRODUCT P20 ver1 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 4 + +/* pin-out */ +#define MATRIX_ROW_PINS { B3, B4, B5, D7, E6 } +#define MATRIX_COL_PINS { D0, B2, D4, B6 } +#define UNUSED_PINS + +#define ENCODERS_PAD_A { F5, F7 } +#define ENCODERS_PAD_B { F6, B1 } + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW \ No newline at end of file diff --git a/keyboards/pabile/p20/keymaps/default/keymap.c b/keyboards/pabile/p20/ver1/keymaps/default/keymap.c similarity index 100% rename from keyboards/pabile/p20/keymaps/default/keymap.c rename to keyboards/pabile/p20/ver1/keymaps/default/keymap.c diff --git a/keyboards/pabile/p20/rules.mk b/keyboards/pabile/p20/ver1/rules.mk similarity index 64% rename from keyboards/pabile/p20/rules.mk rename to keyboards/pabile/p20/ver1/rules.mk index d4fa25323ade..d8e01b847ff7 100644 --- a/keyboards/pabile/p20/rules.mk +++ b/keyboards/pabile/p20/ver1/rules.mk @@ -2,13 +2,6 @@ MCU = atmega32u4 # Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# ATmega32A bootloadHID -# ATmega328P USBasp BOOTLOADER = caterina # Build Options @@ -25,13 +18,11 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output + UNICODE_ENABLE = yes # Unicode IOS_DEVICE_ENABLE = no # connect to IOS Device ENCODER_ENABLE = yes -LAYOUTS = ortho_5x4 +LAYOUTS = ortho_5x4 numpad_5x4 diff --git a/keyboards/pabile/p20/ver1/ver1.c b/keyboards/pabile/p20/ver1/ver1.c new file mode 100644 index 000000000000..65e11630bc88 --- /dev/null +++ b/keyboards/pabile/p20/ver1/ver1.c @@ -0,0 +1,18 @@ +/* +Copyright 2020 Pabile + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "ver1.h" diff --git a/keyboards/pabile/p20/ver1/ver1.h b/keyboards/pabile/p20/ver1/ver1.h new file mode 100644 index 000000000000..36ec781fa1f5 --- /dev/null +++ b/keyboards/pabile/p20/ver1/ver1.h @@ -0,0 +1,50 @@ +/* +Copyright 2020 Pabile + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "quantum.h" + +#define LAYOUT_ortho_5x4( \ + k00, k01, k02, k03, \ + k10, k11, k12, k13, \ + k20, k21, k22, k23, \ + k30, k31, k32, k33, \ + k40, k41, k42, k43 \ +) \ +{ \ + {k00, k01, k02, k03}, \ + {k10, k11, k12, k13}, \ + {k20, k21, k22, k23}, \ + {k30, k31, k32, k33}, \ + {k40, k41, k42, k43} \ +} + +#define LAYOUT_numpad_5x4( \ + k00, k01, k02, k03, \ + k10, k11, k12, \ + k20, k21, k22, k23, \ + k30, k31, k32, \ + k40, k42, k43 \ +) \ +{ \ + {k00, k01, k02, k03}, \ + {k10, k11, k12, KC_NO}, \ + {k20, k21, k22, k23}, \ + {k30, k31, k32, KC_NO}, \ + {k40, KC_NO, k42, k43} \ +} diff --git a/keyboards/pabile/p20/ver2/config.h b/keyboards/pabile/p20/ver2/config.h new file mode 100644 index 000000000000..099700183650 --- /dev/null +++ b/keyboards/pabile/p20/ver2/config.h @@ -0,0 +1,39 @@ +/* +Copyright 2020 Pabile + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x6666 +#define PRODUCT_ID 0x6667 +#define DEVICE_VER 0x0002 +#define MANUFACTURER Pabile +#define PRODUCT P20 ver2 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 4 + +/* pin-out */ +#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 } +#define MATRIX_COL_PINS { D1, D0, D4, B2 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW diff --git a/keyboards/pabile/p20/ver2/keymaps/default/keymap.c b/keyboards/pabile/p20/ver2/keymaps/default/keymap.c new file mode 100644 index 000000000000..2c2af0da8a6b --- /dev/null +++ b/keyboards/pabile/p20/ver2/keymaps/default/keymap.c @@ -0,0 +1,43 @@ +/* +Copyright 2020 Pabile + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +enum custom_keycodes { + DBLZERO = SAFE_RANGE, +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case DBLZERO: + if (record->event.pressed) { + tap_code(KC_P0); + tap_code(KC_P0); + } + break; + } + return true; +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_ortho_5x4( + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, KC_TAB, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, KC_DEL, + KC_P0, DBLZERO, KC_PDOT, KC_PENT) +}; diff --git a/keyboards/pabile/p20/ver2/rules.mk b/keyboards/pabile/p20/ver2/rules.mk new file mode 100644 index 000000000000..da59201fcaed --- /dev/null +++ b/keyboards/pabile/p20/ver2/rules.mk @@ -0,0 +1,28 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output + +UNICODE_ENABLE = yes # Unicode +IOS_DEVICE_ENABLE = no # connect to IOS Device +ENCODER_ENABLE = no + +LAYOUTS = ortho_5x4 numpad_5x4 diff --git a/keyboards/pabile/p20/ver2/ver2.c b/keyboards/pabile/p20/ver2/ver2.c new file mode 100644 index 000000000000..fa7e1f2e395d --- /dev/null +++ b/keyboards/pabile/p20/ver2/ver2.c @@ -0,0 +1,18 @@ +/* +Copyright 2020 Pabile + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "ver2.h" diff --git a/keyboards/pabile/p20/ver2/ver2.h b/keyboards/pabile/p20/ver2/ver2.h new file mode 100644 index 000000000000..36ec781fa1f5 --- /dev/null +++ b/keyboards/pabile/p20/ver2/ver2.h @@ -0,0 +1,50 @@ +/* +Copyright 2020 Pabile + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "quantum.h" + +#define LAYOUT_ortho_5x4( \ + k00, k01, k02, k03, \ + k10, k11, k12, k13, \ + k20, k21, k22, k23, \ + k30, k31, k32, k33, \ + k40, k41, k42, k43 \ +) \ +{ \ + {k00, k01, k02, k03}, \ + {k10, k11, k12, k13}, \ + {k20, k21, k22, k23}, \ + {k30, k31, k32, k33}, \ + {k40, k41, k42, k43} \ +} + +#define LAYOUT_numpad_5x4( \ + k00, k01, k02, k03, \ + k10, k11, k12, \ + k20, k21, k22, k23, \ + k30, k31, k32, \ + k40, k42, k43 \ +) \ +{ \ + {k00, k01, k02, k03}, \ + {k10, k11, k12, KC_NO}, \ + {k20, k21, k22, k23}, \ + {k30, k31, k32, KC_NO}, \ + {k40, KC_NO, k42, k43} \ +} diff --git a/keyboards/pabile/p40/config.h b/keyboards/pabile/p40/config.h index f4252f7ab03e..02ebb67e6baa 100644 --- a/keyboards/pabile/p40/config.h +++ b/keyboards/pabile/p40/config.h @@ -1,3 +1,20 @@ +/* +Copyright 2020 Pabile + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + #pragma once #include "config_common.h" diff --git a/keyboards/pabile/p40/info.json b/keyboards/pabile/p40/info.json index 42f9b4823e16..d05d773282a0 100644 --- a/keyboards/pabile/p40/info.json +++ b/keyboards/pabile/p40/info.json @@ -7,46 +7,46 @@ "layouts": { "LAYOUT_ortho_4x10": { "layout": [ - {"x":0, "y":0}, - {"x":1, "y":0}, - {"x":2, "y":0}, - {"x":3, "y":0}, - {"x":4, "y":0}, - {"x":5, "y":0}, - {"x":6, "y":0}, - {"x":7, "y":0}, - {"x":8, "y":0}, - {"x":9, "y":0}, - {"x":0.25, "y":1}, - {"x":1.25, "y":1}, - {"x":2.25, "y":1}, - {"x":3.25, "y":1}, - {"x":4.25, "y":1}, - {"x":5.25, "y":1}, - {"x":6.25, "y":1}, - {"x":7.25, "y":1}, - {"x":8.25, "y":1}, - {"x":9.25, "y":1}, - {"x":0.5, "y":2}, - {"x":1.5, "y":2}, - {"x":2.5, "y":2}, - {"x":3.5, "y":2}, - {"x":4.5, "y":2}, - {"x":5.5, "y":2}, - {"x":6.5, "y":2}, - {"x":7.5, "y":2}, - {"x":8.5, "y":2}, - {"x":9.5, "y":2}, - {"x":0.75, "y":3}, - {"x":1.75, "y":3}, - {"x":2.75, "y":3}, - {"x":3.75, "y":3}, - {"x":4.75, "y":3}, - {"x":5.75, "y":3}, - {"x":6.75, "y":3}, - {"x":7.75, "y":3}, - {"x":8.75, "y":3}, - {"x":9.75, "y":3}] + {"w":1, "x":0, "y":0}, + {"w":1, "x":1, "y":0}, + {"w":1, "x":2, "y":0}, + {"w":1, "x":3, "y":0}, + {"w":1, "x":4, "y":0}, + {"w":1, "x":5, "y":0}, + {"w":1, "x":6, "y":0}, + {"w":1, "x":7, "y":0}, + {"w":1, "x":8, "y":0}, + {"w":1, "x":9, "y":0}, + {"w":1, "x":0.25, "y":1}, + {"w":1, "x":1.25, "y":1}, + {"w":1, "x":2.25, "y":1}, + {"w":1, "x":3.25, "y":1}, + {"w":1, "x":4.25, "y":1}, + {"w":1, "x":5.25, "y":1}, + {"w":1, "x":6.25, "y":1}, + {"w":1, "x":7.25, "y":1}, + {"w":1, "x":8.25, "y":1}, + {"w":1, "x":9.25, "y":1}, + {"w":1, "x":0.5, "y":2}, + {"w":1, "x":1.5, "y":2}, + {"w":1, "x":2.5, "y":2}, + {"w":1, "x":3.5, "y":2}, + {"w":1, "x":4.5, "y":2}, + {"w":1, "x":5.5, "y":2}, + {"w":1, "x":6.5, "y":2}, + {"w":1, "x":7.5, "y":2}, + {"w":1, "x":8.5, "y":2}, + {"w":1, "x":9.5, "y":2}, + {"w":1, "x":0.75, "y":3}, + {"w":1, "x":1.75, "y":3}, + {"w":1, "x":2.75, "y":3}, + {"w":1, "x":3.75, "y":3}, + {"w":1, "x":4.75, "y":3}, + {"w":1, "x":5.75, "y":3}, + {"w":1, "x":6.75, "y":3}, + {"w":1, "x":7.75, "y":3}, + {"w":1, "x":8.75, "y":3}, + {"w":1, "x":9.75, "y":3}] } } } diff --git a/keyboards/pabile/p40/readme.md b/keyboards/pabile/p40/readme.md index 33a657f384c4..14673d75a202 100644 --- a/keyboards/pabile/p40/readme.md +++ b/keyboards/pabile/p40/readme.md @@ -6,10 +6,11 @@ A compact 4x10 (40%) staggered DIY keyboard kit. * Keyboard Maintainer: [pabile](https://github.com/pabile) * Hardware Supported: Pabile P40 PCB, Pro Micro -* Hardware Availability: [Info at pabileonline.blogspot.com](https://pabileonline.blogspot.com/search/label/pabile40) +* Hardware Availability: [Info at pabileonline.blogspot.com](https://pabileonline.blogspot.com/search/label/p40) Make example for this keyboard (after setting up your build environment): make pabile/p40:default + See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/pabile/p40_ortho/config.h b/keyboards/pabile/p40_ortho/config.h new file mode 100644 index 000000000000..4fd8e7a533ba --- /dev/null +++ b/keyboards/pabile/p40_ortho/config.h @@ -0,0 +1,40 @@ +/* +Copyright 2020 Pabile + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x6666 +#define PRODUCT_ID 0x6669 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Pabile +#define PRODUCT P40 Ortho Keyboard + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 10 + +/* pin-out */ +#define MATRIX_ROW_PINS { D1, D0, F4, F5 } +#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B2, B3, B1, F7, F6 } + +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW diff --git a/keyboards/pabile/p40_ortho/info.json b/keyboards/pabile/p40_ortho/info.json new file mode 100644 index 000000000000..a4d757be9276 --- /dev/null +++ b/keyboards/pabile/p40_ortho/info.json @@ -0,0 +1,52 @@ +{ + "keyboard_name": "", + "url": "", + "maintainer": "qmk", + "width": 10, + "height": 4, + "layouts": { + "LAYOUT_ortho_4x10": { + "layout": [ + {"label":"Q", "x":0, "y":0}, + {"label":"W", "x":1, "y":0}, + {"label":"E", "x":2, "y":0}, + {"label":"R", "x":3, "y":0}, + {"label":"T", "x":4, "y":0}, + {"label":"Y", "x":5, "y":0}, + {"label":"U", "x":6, "y":0}, + {"label":"I", "x":7, "y":0}, + {"label":"O", "x":8, "y":0}, + {"label":"P", "x":9, "y":0}, + {"label":"A", "x":0, "y":1}, + {"label":"S", "x":1, "y":1}, + {"label":"D", "x":2, "y":1}, + {"label":"F", "x":3, "y":1}, + {"label":"G", "x":4, "y":1}, + {"label":"H", "x":5, "y":1}, + {"label":"J", "x":6, "y":1}, + {"label":"K", "x":7, "y":1}, + {"label":"L", "x":8, "y":1}, + {"label":"-", "x":9, "y":1}, + {"label":"Z", "x":0, "y":2}, + {"label":"X", "x":1, "y":2}, + {"label":"C", "x":2, "y":2}, + {"label":"V", "x":3, "y":2}, + {"label":"B", "x":4, "y":2}, + {"label":"N", "x":5, "y":2}, + {"label":"M", "x":6, "y":2}, + {"label":",", "x":7, "y":2}, + {"label":".", "x":8, "y":2}, + {"label":"?", "x":9, "y":2}, + {"label":"Ctrl", "x":0, "y":3}, + {"label":"Win", "x":1, "y":3}, + {"label":"Alt", "x":2, "y":3}, + {"label":"Shift", "x":3, "y":3}, + {"label":"←", "x":4, "y":3}, + {"x":5, "y":3}, + {"label":"Enter", "x":6, "y":3}, + {"label":"Alt", "x":7, "y":3}, + {"label":"Super", "x":8, "y":3}, + {"label":"Ctrl", "x":9, "y":3}] + } + } +} diff --git a/keyboards/pabile/p40_ortho/keymaps/default/keymap.c b/keyboards/pabile/p40_ortho/keymaps/default/keymap.c new file mode 100644 index 000000000000..ac41acf2daad --- /dev/null +++ b/keyboards/pabile/p40_ortho/keymaps/default/keymap.c @@ -0,0 +1,46 @@ +/* +Copyright 2020 Pabile + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_ortho_4x10( + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, LT(3,KC_MINS), + KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, LT(4,KC_SLSH), + KC_LCTL, KC_LGUI, KC_LALT, KC_LSFT, LT(2,KC_BSPC), LT(1,KC_SPC), KC_ENT, KC_APP, KC_DEL, KC_ESC), + [1] = LAYOUT_ortho_4x10( + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, + KC_TAB, KC_NO, KC_NO, KC_GRV, KC_LBRC, KC_RBRC, KC_BSLS, KC_SCLN, KC_QUOT, KC_MINS, + KC_NO, KC_NO, KC_NO, KC_NO, KC_EQL, KC_MINS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + [2] = LAYOUT_ortho_4x10( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, + KC_TAB, KC_F11, KC_F12, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_CAPS, KC_PSCR, KC_SLCK, KC_PAUS, KC_NO, KC_NLCK, KC_NO, KC_VOLD, KC_VOLU, KC_MUTE, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO), + [3] = LAYOUT_ortho_4x10( + KC_ESC, KC_NO, KC_NO, KC_NO, KC_NO, KC_INS, KC_PGUP, KC_UP, KC_PGDN, KC_DEL, + KC_TAB, KC_NO, KC_NO, KC_NO, KC_NO, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_END, KC_NO, KC_NO, KC_NO, KC_NO, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSPC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO), + [4] = LAYOUT_ortho_4x10( + KC_ESC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_BTN1, KC_MS_U, KC_BTN2, KC_DEL, + KC_TAB, KC_NO, KC_NO, KC_NO, KC_NO, KC_WH_U, KC_MS_L, KC_MS_D, KC_MS_R, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_WH_D, KC_NO, KC_NO, KC_NO, KC_NO, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSPC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO) +}; diff --git a/keyboards/pabile/p40_ortho/p40_ortho.c b/keyboards/pabile/p40_ortho/p40_ortho.c new file mode 100644 index 000000000000..b6573bd8025c --- /dev/null +++ b/keyboards/pabile/p40_ortho/p40_ortho.c @@ -0,0 +1,18 @@ +/* +Copyright 2020 Pabile + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "p40_ortho.h" diff --git a/keyboards/pabile/p40_ortho/p40_ortho.h b/keyboards/pabile/p40_ortho/p40_ortho.h new file mode 100644 index 000000000000..dd2c899daa07 --- /dev/null +++ b/keyboards/pabile/p40_ortho/p40_ortho.h @@ -0,0 +1,45 @@ +/* +Copyright 2020 Pabile + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "quantum.h" + +#define LAYOUT_ortho_4x10( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39 \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39} \ +} +#define LAYOUT_ortho_4x10_1x2u_c( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \ + k30, k31, k32, k33, k34, k36, k37, k38, k39 \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29}, \ + {k30, k31, k32, k33, k34, KC_NO, k36, k37, k38, k39} \ +} diff --git a/keyboards/pabile/p40_ortho/readme.md b/keyboards/pabile/p40_ortho/readme.md new file mode 100644 index 000000000000..736c5b497f98 --- /dev/null +++ b/keyboards/pabile/p40_ortho/readme.md @@ -0,0 +1,15 @@ +# P40 Ortho + +![prototype photo1](https://github.com/pabile/p40_ortho/blob/master/files/p40-ortho-003.jpg) + +A compact 4x10 (40%) ortho-linear DIY keyboard kit. + +* Keyboard Maintainer: [pabile](https://github.com/pabile) +* Hardware Supported: Pabile P40 PCB, Pro Micro, ALPS / MX Switches +* Hardware Availability: [pabileonline.blogspot.com](https://pabileonline.blogspot.com/search/label/pabile40) + +Make example for this keyboard (after setting up your build environment): + + make pabile/p40_ortho:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/pabile/p40_ortho/rules.mk b/keyboards/pabile/p40_ortho/rules.mk new file mode 100644 index 000000000000..ba0ad23c8a45 --- /dev/null +++ b/keyboards/pabile/p40_ortho/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output +UNICODE_ENABLE = yes # Unicode +IOS_DEVICE_ENABLE = no # connect to IOS Device diff --git a/keyboards/pabile/p42/config.h b/keyboards/pabile/p42/config.h new file mode 100644 index 000000000000..2f7c5ce30a9c --- /dev/null +++ b/keyboards/pabile/p42/config.h @@ -0,0 +1,45 @@ +/* +Copyright 2020 Pabile + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x6666 +#define PRODUCT_ID 0x6670 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Pabile +#define PRODUCT P42 Keyboard + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 11 + +/* pin-out for PROMICRO */ +#define MATRIX_ROW_PINS { D1, D0, D4, C6 } +#define MATRIX_COL_PINS { D7, E6, B4, B5, D2, D3, F7, B1, B3, B2, B6 } + +/* pin-out for BLUEFRUIT +#define MATRIX_ROW_PINS { F7, F6, F5, F4 } +#define MATRIX_COL_PINS { F1, F0, B1, B2, B3, D2, C7, D6, B7, B6, B5 } +*/ + +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW diff --git a/keyboards/pabile/p42/info.json b/keyboards/pabile/p42/info.json new file mode 100644 index 000000000000..77bce4bab28c --- /dev/null +++ b/keyboards/pabile/p42/info.json @@ -0,0 +1,13 @@ +{ + "keyboard_name": "P42", + "url": "https://pabileonline.blogspot.com/", + "maintainer": "Pabile", + "width": 11.25, + "height": 4, + "layouts": { + "LAYOUT": { + "layout": [ + {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"label":",", "x":7, "y":2}, {"label":".", "x":8, "y":2}, {"x":9, "y":2}, {"x":10.25, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10.25, "y":3}] + } + } +} diff --git a/keyboards/pabile/p42/keymaps/default/keymap.c b/keyboards/pabile/p42/keymaps/default/keymap.c new file mode 100644 index 000000000000..39c9e639e426 --- /dev/null +++ b/keyboards/pabile/p42/keymaps/default/keymap.c @@ -0,0 +1,29 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, LT(3,KC_MINS), + KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_LSFT, LT(2,KC_BSPC), LT(1,KC_SPC), LT(4,KC_ENT), KC_DEL, KC_RALT, KC_RCTL, KC_ESC), + [1] = LAYOUT( + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, + KC_TAB, KC_NO, KC_NO, KC_GRV, KC_LBRC, KC_RBRC, KC_BSLS, KC_SCLN, KC_QUOT, KC_MINS, + KC_NO, KC_NO, KC_NO, KC_NO, KC_EQL, KC_MINS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + [2] = LAYOUT( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, + KC_TAB, KC_F11, KC_F12, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_CAPS, KC_PSCR, KC_SLCK, KC_PAUS, KC_NO, KC_NLCK, KC_NO, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS), + [3] = LAYOUT( + KC_ESC, KC_NO, KC_NO, KC_NO, KC_NO, KC_INS, KC_PGUP, KC_UP, KC_PGDN, KC_DEL, + KC_TAB, KC_NO, KC_NO, KC_NO, KC_NO, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_END, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSPC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS), + [4] = LAYOUT( + KC_ESC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_BTN1, KC_MS_U, KC_BTN2, KC_DEL, + KC_TAB, KC_NO, KC_NO, KC_NO, KC_NO, KC_WH_U, KC_MS_L, KC_MS_D, KC_MS_R, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_WH_D, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSPC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS) +}; diff --git a/keyboards/pabile/p42/p42.c b/keyboards/pabile/p42/p42.c new file mode 100644 index 000000000000..63bf51bd581c --- /dev/null +++ b/keyboards/pabile/p42/p42.c @@ -0,0 +1 @@ +#include "p42.h" diff --git a/keyboards/pabile/p42/p42.h b/keyboards/pabile/p42/p42.h new file mode 100644 index 000000000000..41aed042a20b --- /dev/null +++ b/keyboards/pabile/p42/p42.h @@ -0,0 +1,33 @@ +/* +Copyright 2020 Pabile + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "quantum.h" + +#define LAYOUT( \ + k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, \ + k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, \ + k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210,\ + k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310 \ +) \ +{ \ + {k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, KC_NO}, \ + {k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, KC_NO}, \ + {k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210}, \ + {k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310} \ +} diff --git a/keyboards/pabile/p42/readme.md b/keyboards/pabile/p42/readme.md new file mode 100644 index 000000000000..5ad0036bff62 --- /dev/null +++ b/keyboards/pabile/p42/readme.md @@ -0,0 +1,15 @@ +# P42 + +![prototype photo1](https://github.com/pabile/P42/blob/master/docs/p42-001-small.jpg) + +42-key Ortho-linear keyboard + +* Keyboard Maintainer: [pabile](https://github.com/pabile) +* Hardware Supported: Pabile P42 PCB, Pro Micro, Bluefruit LE, Hotswap Sockets +* Hardware Availability: [pabileonline.blogspot.com](https://pabileonline.blogspot.com/) + +Make example for this keyboard (after setting up your build environment): + + make pabile/p42:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/pabile/p42/rules.mk b/keyboards/pabile/p42/rules.mk new file mode 100644 index 000000000000..ba0ad23c8a45 --- /dev/null +++ b/keyboards/pabile/p42/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output +UNICODE_ENABLE = yes # Unicode +IOS_DEVICE_ENABLE = no # connect to IOS Device diff --git a/keyboards/phoenix/chconf.h b/keyboards/phoenix/chconf.h new file mode 100644 index 000000000000..7dc4f84a8a00 --- /dev/null +++ b/keyboards/phoenix/chconf.h @@ -0,0 +1,714 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file rt/templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ +#define _CHIBIOS_RT_CONF_VER_6_0_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_ST_RESOLUTION) +#define CH_CFG_ST_RESOLUTION 32 +#endif + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#if !defined(CH_CFG_ST_FREQUENCY) +#define CH_CFG_ST_FREQUENCY 10000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#if !defined(CH_CFG_ST_TIMEDELTA) +#define CH_CFG_ST_TIMEDELTA 2 +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 0 +#endif + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#if !defined(CH_CFG_MEMCORE_SIZE) +#define CH_CFG_MEMCORE_SIZE 0 +#endif + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#if !defined(CH_CFG_NO_IDLE_THREAD) +#define CH_CFG_NO_IDLE_THREAD FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) +#define CH_CFG_OPTIMIZE_SPEED TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_TM) +#define CH_CFG_USE_TM TRUE +#endif + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_REGISTRY) +#define CH_CFG_USE_REGISTRY TRUE +#endif + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_WAITEXIT) +#define CH_CFG_USE_WAITEXIT TRUE +#endif + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_SEMAPHORES) +#define CH_CFG_USE_SEMAPHORES TRUE +#endif + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MUTEXES) +#define CH_CFG_USE_MUTEXES TRUE +#endif + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_CONDVARS) +#define CH_CFG_USE_CONDVARS TRUE +#endif + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE +#endif + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_EVENTS) +#define CH_CFG_USE_EVENTS TRUE +#endif + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MESSAGES) +#define CH_CFG_USE_MESSAGES TRUE +#endif + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_MAILBOXES) +#define CH_CFG_USE_MAILBOXES TRUE +#endif + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMCORE) +#define CH_CFG_USE_MEMCORE TRUE +#endif + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#if !defined(CH_CFG_USE_HEAP) +#define CH_CFG_USE_HEAP TRUE +#endif + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMPOOLS) +#define CH_CFG_USE_MEMPOOLS TRUE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS TRUE +#endif + +/** + * @brief Pipes APIs. + * @details If enabled then the pipes APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_PIPES) +#define CH_CFG_USE_PIPES TRUE +#endif + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#if !defined(CH_CFG_USE_DYNAMIC) +#define CH_CFG_USE_DYNAMIC TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY TRUE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES TRUE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES TRUE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE +#endif + +/** + * @brief Enables factory for Pipes. + */ +#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) +#define CH_CFG_FACTORY_PIPES TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_STATISTICS) +#define CH_DBG_STATISTICS FALSE +#endif + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) +#define CH_DBG_SYSTEM_STATE_CHECK FALSE +#endif + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS FALSE +#endif + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS FALSE +#endif + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK FALSE +#endif + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS FALSE +#endif + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#if !defined(CH_DBG_THREADS_PROFILING) +#define CH_DBG_THREADS_PROFILING FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p _thread_init() function. + * + * @note It is invoked from within @p _thread_init() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/phoenix/config.h b/keyboards/phoenix/config.h new file mode 100644 index 000000000000..81fc3677ffcc --- /dev/null +++ b/keyboards/phoenix/config.h @@ -0,0 +1,50 @@ + +/* Copyright 2019 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x456B +#define PRODUCT_ID 0x0001 +#define DEVICE_VER 0x0001 +#define MANUFACTURER ErgoKB +#define PRODUCT Phoenix + +/* key matrix size */ +#define MATRIX_ROWS 12 +#define MATRIX_COLS 7 + +#define MOUSEKEY_INTERVAL 10 +#define MOUSEKEY_DELAY 0 +#define MOUSEKEY_TIME_TO_MAX 60 +#define MOUSEKEY_MAX_SPEED 7 +#define MOUSEKEY_WHEEL_DELAY 0 + +#define DIODE_DIRECTION ROW2COL + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +#define MATRIX_ROW_PINS { B1, B0, A7, A6, A5, B7 } +#define MATRIX_COL_PINS { B10, B12, B13, B14, B15, A8, A10 } + +#define HAL_USE_SERIAL TRUE +#define SPLIT_HAND_PIN B9 +#define SOFT_SERIAL_PIN A9 +#define SERIAL_USART_DRIVER SD1 +#define SERIAL_USART_TX_PAL_MODE 7 diff --git a/keyboards/phoenix/halconf.h b/keyboards/phoenix/halconf.h new file mode 100644 index 000000000000..a8db392aaa6c --- /dev/null +++ b/keyboards/phoenix/halconf.h @@ -0,0 +1,525 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#define _CHIBIOS_HAL_CONF_ +#define _CHIBIOS_HAL_CONF_VER_7_0_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SIO subsystem. + */ +#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) +#define HAL_USE_SIO FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the TRNG subsystem. + */ +#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) +#define HAL_USE_TRNG FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/** + * @brief Enables the WSPI subsystem. + */ +#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) +#define HAL_USE_WSPI FALSE +#endif + +/*===========================================================================*/ +/* PAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) +#define PAL_USE_CALLBACKS FALSE +#endif + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) +#define PAL_USE_WAIT FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/** + * @brief Enforces the driver to use direct callbacks rather than OSAL events. + */ +#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) +#define CAN_ENFORCE_USE_CALLBACKS FALSE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* DAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) +#define DAC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define DAC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the zero-copy API. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/** + * @brief OCR initialization constant for V20 cards. + */ +#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) +#define SDC_INIT_OCR_V20 0x50FF8000U +#endif + +/** + * @brief OCR initialization constant for non-V20 cards. + */ +#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) +#define SDC_INIT_OCR 0x80100000U +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables circular transfers APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) +#define SPI_USE_CIRCULAR FALSE +#endif + + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/** + * @brief Handling method for SPI CS line. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) +#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +/*===========================================================================*/ +/* WSPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) +#define WSPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define WSPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/keyboards/phoenix/info.json b/keyboards/phoenix/info.json new file mode 100644 index 000000000000..f1275b9de613 --- /dev/null +++ b/keyboards/phoenix/info.json @@ -0,0 +1,58 @@ +{ + "keyboard_name": "Phoenix", + "url": "ergokb.tw", + "maintainer": "ErgoKB via lschyi", + "manufacturer": "ErgoKB", + "width": 17, + "height": 8, + + "layouts": { + "LAYOUT_ergodox": { + "layout": [ + {"x":0, "y":0.375, "w":1.5}, {"x":1.5, "y":0.375}, {"x":2.5, "y":0.125}, {"x":3.5, "y":0}, {"x":4.5, "y":0.125}, {"x":5.5, "y":0.25}, {"x":6.5, "y":0.25}, + {"x":0, "y":1.375, "w":1.5}, {"x":1.5, "y":1.375}, {"x":2.5, "y":1.125}, {"x":3.5, "y":1}, {"x":4.5, "y":1.125}, {"x":5.5, "y":1.25}, {"x":6.5, "y":1.25, "h":1.5}, + {"x":0, "y":2.375, "w":1.5}, {"x":1.5, "y":2.375}, {"x":2.5, "y":2.125}, {"x":3.5, "y":2}, {"x":4.5, "y":2.125}, {"x":5.5, "y":2.25}, + {"x":0, "y":3.375, "w":1.5}, {"x":1.5, "y":3.375}, {"x":2.5, "y":3.125}, {"x":3.5, "y":3}, {"x":4.5, "y":3.125}, {"x":5.5, "y":3.25}, {"x":6.5, "y":2.75, "h":1.5}, + {"x":0.5, "y":4.375}, {"x":1.5, "y":4.375}, {"x":2.5, "y":4.125}, {"x":3.5, "y":4}, {"x":4.5, "y":4.125}, + + {"x":6, "y":5}, {"x":7, "y":5}, + {"x":7, "y":6}, + {"x":5, "y":6, "h":2}, {"x":6, "y":6, "h":2}, {"x":7, "y":7}, + + + {"x":9.5, "y":0.25}, {"x":10.5, "y":0.25}, {"x":11.5, "y":0.125}, {"x":12.5, "y":0}, {"x":13.5, "y":0.125}, {"x":14.5, "y":0.375}, {"x":15.5, "y":0.375, "w":1.5}, + {"x":9.5, "y":1.25, "h":1.5}, {"x":10.5, "y":1.25}, {"x":11.5, "y":1.125}, {"x":12.5, "y":1}, {"x":13.5, "y":1.125}, {"x":14.5, "y":1.375}, {"x":15.5, "y":1.375, "w":1.5}, + {"x":10.5, "y":2.25}, {"x":11.5, "y":2.125}, {"x":12.5, "y":2}, {"x":13.5, "y":2.125}, {"x":14.5, "y":2.375}, {"x":15.5, "y":2.375, "w":1.5}, + {"x":9.5, "y":2.75, "h":1.5}, {"x":10.5, "y":3.25}, {"x":11.5, "y":3.125}, {"x":12.5, "y":3}, {"x":13.5, "y":3.125}, {"x":14.5, "y":3.375}, {"x":15.5, "y":3.375, "w":1.5}, + {"x":11.5, "y":4.125}, {"x":12.5, "y":4}, {"x":13.5, "y":4.125}, {"x":14.5, "y":4.375}, {"x":15.5, "y":4.375}, + + + {"x":9, "y":5}, {"x":10, "y":5}, + {"x":9, "y":6}, + {"x":9, "y":7}, {"x":10, "y":6, "h":2}, {"x":11, "y":6, "h":2} + ] + }, + "LAYOUT_ergodox_pretty": { + "layout": [ + {"x":0, "y":0.375, "w":1.5}, {"x":1.5, "y":0.375}, {"x":2.5, "y":0.125}, {"x":3.5, "y":0}, {"x":4.5, "y":0.125}, {"x":5.5, "y":0.25}, {"x":6.5, "y":0.25}, + {"x":9.5, "y":0.25}, {"x":10.5, "y":0.25}, {"x":11.5, "y":0.125}, {"x":12.5, "y":0}, {"x":13.5, "y":0.125}, {"x":14.5, "y":0.375}, {"x":15.5, "y":0.375, "w":1.5}, + + {"x":0, "y":1.375, "w":1.5}, {"x":1.5, "y":1.375}, {"x":2.5, "y":1.125}, {"x":3.5, "y":1}, {"x":4.5, "y":1.125}, {"x":5.5, "y":1.25}, {"x":6.5, "y":1.25, "h":1.5}, + {"x":9.5, "y":1.25, "h":1.5}, {"x":10.5, "y":1.25}, {"x":11.5, "y":1.125}, {"x":12.5, "y":1}, {"x":13.5, "y":1.125}, {"x":14.5, "y":1.375}, {"x":15.5, "y":1.375, "w":1.5}, + + {"x":0, "y":2.375, "w":1.5}, {"x":1.5, "y":2.375}, {"x":2.5, "y":2.125}, {"x":3.5, "y":2}, {"x":4.5, "y":2.125}, {"x":5.5, "y":2.25}, + {"x":10.5, "y":2.25}, {"x":11.5, "y":2.125}, {"x":12.5, "y":2}, {"x":13.5, "y":2.125}, {"x":14.5, "y":2.375}, {"x":15.5, "y":2.375, "w":1.5}, + + {"x":0, "y":3.375, "w":1.5}, {"x":1.5, "y":3.375}, {"x":2.5, "y":3.125}, {"x":3.5, "y":3}, {"x":4.5, "y":3.125}, {"x":5.5, "y":3.25}, {"x":6.5, "y":2.75, "h":1.5}, + {"x":9.5, "y":2.75, "h":1.5}, {"x":10.5, "y":3.25}, {"x":11.5, "y":3.125}, {"x":12.5, "y":3}, {"x":13.5, "y":3.125}, {"x":14.5, "y":3.375}, {"x":15.5, "y":3.375, "w":1.5}, + + {"x":0.5, "y":4.375}, {"x":1.5, "y":4.375}, {"x":2.5, "y":4.125}, {"x":3.5, "y":4}, {"x":4.5, "y":4.125}, + {"x":11.5, "y":4.125}, {"x":12.5, "y":4}, {"x":13.5, "y":4.125}, {"x":14.5, "y":4.375}, {"x":15.5, "y":4.375}, + + {"x":6, "y":5}, {"x":7, "y":5}, {"x":9, "y":5}, {"x":10, "y":5}, + {"x":7, "y":6}, {"x":9, "y":6}, + {"x":5, "y":6, "h":2}, {"x":6, "y":6, "h":2}, {"x":7, "y":7}, {"x":9, "y":7}, {"x":10, "y":6, "h":2}, {"x":11, "y":6, "h":2} + ] + } + } +} diff --git a/keyboards/phoenix/keymaps/default/keymap.c b/keyboards/phoenix/keymaps/default/keymap.c new file mode 100644 index 000000000000..909e1dbb6057 --- /dev/null +++ b/keyboards/phoenix/keymaps/default/keymap.c @@ -0,0 +1,129 @@ +#include QMK_KEYBOARD_H + +enum layers { + BASE, // default layer + ARROW, // arrows + MOUSE, // mouse keys +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ESC | 1 | 2 | 3 | 4 | 5 | ~ | | EQL | 6 | 7 | 8 | 9 | 0 | DEL | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | TAB | Q | W | E | R | T | LCTL | | EQL | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | LCTL | A | S | D | F | G |------| |------| H | J | K | L | ; | ' | + * |--------+------+------+------+------+------| LSFT | | MIN |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | B | | | | N | M | , | . | / | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | MUTE |TG(2) | LSFT | LCTL | LALT | | EQL | MIN | [ | ] | TG(1) | + * `----------------------------------' `----------------------------------' + * ,-------------. ,---------------. + * | VOLD | VOL_U| | F10 | F12 | + * ,------|------|------| |------+--------+------. + * | | | LCTL | | F11 | | | + * | Space| LGUI |------| |------| MO(1) |Enter | + * | | | LSFT | | ESC | | | + * `--------------------' `----------------------' + */ +[BASE] = LAYOUT_ergodox( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LCTL, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LSFT, + KC_MUTE, TG(2), KC_LSFT, KC_LCTL, KC_LALT, + KC_VOLD, KC_VOLU, + KC_LCTL, + KC_SPC, KC_LGUI, KC_LSFT, + + KC_EQL, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, + KC_EQL, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_MINS, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, TG(1), + KC_F10, KC_F12, + KC_F11, + KC_ESC, MO(1), KC_ENT), + +/* Keymap 1: Arrow layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | | | | | | PgDn | PgUp | | [ | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | ~ | |------| |------| LEFT | DOWN | UP |RIGHT |Backsp| ] | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,---------------. + * | | | | | | + * ,------|------|------| |------+--------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `----------------------' + */ +[ARROW] = LAYOUT_ergodox( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TILD, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_PGDN, KC_PGUP, KC_TRNS, KC_LBRC, KC_TRNS, + KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_BSPC, KC_RBRC, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS), + +/* Keymap 2: Mouse layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | |------| |------| | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | WH_U | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | WH_L | WH_D | WH_R | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,---------------. + * | | | | | | + * ,------|------|------| |------+--------+------. + * | | | | | | | | + * | BTN1 | |------| |------| | | + * | | | | | | | | + * `--------------------' `----------------------' + */ +[MOUSE] = LAYOUT_ergodox( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_BTN1, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS), +}; diff --git a/keyboards/phoenix/mcuconf.h b/keyboards/phoenix/mcuconf.h new file mode 100644 index 000000000000..7758cf476887 --- /dev/null +++ b/keyboards/phoenix/mcuconf.h @@ -0,0 +1,253 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 25 +#define STM32_PLLN_VALUE 336 +#define STM32_PLLP_VALUE 4 +#define STM32_PLLQ_VALUE 7 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 15 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_PRIORITY 6 +#define STM32_IRQ_EXTI21_PRIORITY 15 +#define STM32_IRQ_EXTI22_PRIORITY 15 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * I2S driver system settings. + */ +#define STM32_I2S_USE_SPI2 FALSE +#define STM32_I2S_USE_SPI3 FALSE +#define STM32_I2S_SPI2_IRQ_PRIORITY 10 +#define STM32_I2S_SPI3_IRQ_PRIORITY 10 +#define STM32_I2S_SPI2_DMA_PRIORITY 1 +#define STM32_I2S_SPI3_DMA_PRIORITY 1 +#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 TRUE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 TRUE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG_THREAD_PRIO NORMALPRIO+1 +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#endif /* MCUCONF_H */ diff --git a/keyboards/phoenix/phoenix.c b/keyboards/phoenix/phoenix.c new file mode 100644 index 000000000000..e79b35b1591f --- /dev/null +++ b/keyboards/phoenix/phoenix.c @@ -0,0 +1,85 @@ +#include "hal.h" +#include "usb_main.h" +#include "phoenix.h" + +void bootmagic_lite(void) { + matrix_scan(); + wait_ms(5); + matrix_scan(); + + if ((matrix_get_row(0) & 1) || (matrix_get_row(6) & 1)) { + palSetPadMode(GPIOB, 8, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 5, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 6, PAL_MODE_OUTPUT_PUSHPULL); + led1_off(); + led2_off(); + led3_off(); + + led3_on(); + wait_ms(50); + led2_on(); + wait_ms(50); + led1_on(); + wait_ms(50); + + led3_off(); + wait_ms(50); + led2_off(); + wait_ms(50); + led1_off(); + wait_ms(50); + + bootloader_jump(); + } +} + +void keyboard_pre_init_kb(void) { + palSetPadMode(GPIOB, 8, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 5, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 6, PAL_MODE_OUTPUT_PUSHPULL); + led1_off(); + led2_off(); + led3_off(); + + keyboard_pre_init_user(); +} + +void keyboard_post_init_kb(void) { + led1_on(); + wait_ms(50); + led2_on(); + wait_ms(50); + led3_on(); + wait_ms(50); + + led1_off(); + wait_ms(50); + led2_off(); + wait_ms(50); + led3_off(); + wait_ms(50); + + keyboard_post_init_user(); +} + +void manipulate_led(uint32_t led, bool on) { + switch (led) { + case 1: + on ? led1_on() : led1_off(); + case 2: + on ? led2_on() : led2_off(); + case 3: + on ? led3_on() : led3_off(); + } +} + + +layer_state_t layer_state_set_kb(uint32_t state) { + state = layer_state_set_user(state); + + uint8_t layer = get_highest_layer(state); + manipulate_led(1, layer & 1); + manipulate_led(2, layer >> 1 & 1); + manipulate_led(3, layer >> 2 & 1); + return state; +} diff --git a/keyboards/phoenix/phoenix.h b/keyboards/phoenix/phoenix.h new file mode 100644 index 000000000000..bd8e4a30ab4e --- /dev/null +++ b/keyboards/phoenix/phoenix.h @@ -0,0 +1,94 @@ +/* Copyright 2019 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +inline void led_pin_on(uint8_t pin) { palSetPad(GPIOB, pin); }; +inline void led_pin_off(uint8_t pin) { palClearPad(GPIOB, pin); }; + +inline void led1_on(void) { led_pin_on(8); }; +inline void led2_on(void) { led_pin_on(5); }; +inline void led3_on(void) { led_pin_on(6); }; + +inline void led1_off(void) { led_pin_off(8); }; +inline void led2_off(void) { led_pin_off(5); }; +inline void led3_off(void) { led_pin_off(6); }; + +#define LAYOUT_ergodox( \ + k00,k01,k02,k03,k04,k05,k06, \ + k10,k11,k12,k13,k14,k15,k16, \ + k20,k21,k22,k23,k24,k25, \ + k30,k31,k32,k33,k34,k35,k36, \ + k40,k41,k42,k43,k44, \ + k55,k56, \ + k54, \ + k53,k52,k51, \ + \ + k07,k08,k09,k0A,k0B,k0C,k0D, \ + k17,k18,k19,k1A,k1B,k1C,k1D, \ + k28,k29,k2A,k2B,k2C,k2D, \ + k37,k38,k39,k3A,k3B,k3C,k3D, \ + k49,k4A,k4B,k4C,k4D, \ + k57,k58, \ + k59, \ + k5C,k5B,k5A ) \ + \ + /* matrix positions */ \ + { \ + { k00, k01, k02, k03, k04, k05, k06 }, \ + { k10, k11, k12, k13, k14, k15, k16 }, \ + { k20, k21, k22, k23, k24, k25 }, \ + { k30, k31, k32, k33, k34, k35, k36 }, \ + { k40, k41, k42, k43, k44 }, \ + { k53, k52, k51, k55, k56, k54 }, \ + \ + { k0D, k0C, k0B, k0A, k09, k08, k07 }, \ + { k1D, k1C, k1B, k1A, k19, k18, k17 }, \ + { k2D, k2C, k2B, k2A, k29, k28 }, \ + { k3D, k3C, k3B, k3A, k39, k38, k37 }, \ + { k4D, k4C, k4B, k4A, k49 }, \ + { k5A, k5B, k5C, k58, k57, k59 }, \ + } + +/* ---------- LEFT HAND ----------- ---------- RIGHT HAND ---------- */ +#define LAYOUT_ergodox_pretty( \ + L00,L01,L02,L03,L04,L05,L06, R00,R01,R02,R03,R04,R05,R06, \ + L10,L11,L12,L13,L14,L15,L16, R10,R11,R12,R13,R14,R15,R16, \ + L20,L21,L22,L23,L24,L25, R21,R22,R23,R24,R25,R26, \ + L30,L31,L32,L33,L34,L35,L36, R30,R31,R32,R33,R34,R35,R36, \ + L40,L41,L42,L43,L44, R42,R43,R44,R45,R46, \ + L55,L56, R50,R51, \ + L54, R52, \ + L53,L52,L51, R55,R54,R53 ) \ + \ + /* matrix positions */ \ + { \ + { L00, L10, L02, L03, L04, L05, L06 },\ + { L10, L11, L12, L13, L14, L15, L16 },\ + { L20, L21, L22, L23, L24, L25 }, \ + { L30, L31, L32, L33, L34, L35, L36 },\ + { L40, L41, L42, L43, L44 }, \ + { L53, L52, L51, L55, L56, L54 }, \ + \ + { R00, R01, R02, R03, R04, R05, R06 },\ + { R10, R11, R12, R13, R14, R15, R16 },\ + { R20, R21, R22, R23, R24, R25 }, \ + { R30, R31, R32, R33, R34, R35, R36 },\ + { R40, R41, R42, R43, R44 }, \ + { R53, R54, R55, R51, R50, R52 }, \ + } diff --git a/keyboards/phoenix/readme.md b/keyboards/phoenix/readme.md new file mode 100644 index 000000000000..a39f52359b7b --- /dev/null +++ b/keyboards/phoenix/readme.md @@ -0,0 +1,15 @@ +# Phoenix + +![Phoenix](https://imgur.com/adJiuMHl.jpg) + +A reborn version of Ergodox with several improved features. [More info on ErgoKB](https://www.ergokb.tw/) + +* Keyboard Maintainer: [lschyi](https://github.com/lschyi) +* Hardware Supported: Phoenix Mechanical Keyboard PCB +* Hardware Availability: [ErgoKB](https://www.ergokb.tw/products/phoenix/) + +Make example for this keyboard (after setting up your build environment): + + make phoenix:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/phoenix/rules.mk b/keyboards/phoenix/rules.mk new file mode 100644 index 000000000000..968c6548c05d --- /dev/null +++ b/keyboards/phoenix/rules.mk @@ -0,0 +1,26 @@ +# MCU name +MCU = STM32F401 + +# Address of the bootloader in system memory +STM32_BOOTLOADER_ADDRESS = 0x1FFF0000 + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend, do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +NKRO_ENABLE = yes # USB Nkey Rollover, if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output +STENO_ENABLE = no +SPLIT_KEYBOARD = yes +SERIAL_DRIVER = usart +KEYBOARD_SHARED_EP = yes + +OPT_DEFS += -DSTM32_DMA_REQUIRED=TRUE diff --git a/keyboards/planck/keymaps/badger/keymap.c b/keyboards/planck/keymaps/badger/keymap.c new file mode 100644 index 000000000000..332142519027 --- /dev/null +++ b/keyboards/planck/keymaps/badger/keymap.c @@ -0,0 +1,60 @@ +/* +Copyright 2020 Dan White + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "ortho.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY_MAC_ORTHO] = LAYOUT_ortho_4x12( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, \ + MOMAC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, \ + KC_LCTL, KC_LALT, KC_LGUI, RAISE, P_ADJ, KC_SPC, LOWER, KC_NO, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC), + + [_MOVE_MAC_ORTHO] = LAYOUT_ortho_4x12( + KC_BACK, IJ_STEP, IJ_INTO, IJ_OUT, IJ_RUN, IJ_STOP, _______, WD_BACK, KC_HOME, KC_END, WD_FRWD, KC_NEXT, \ + _______, MM_LH, MM_MAX, MM_RH, IJ_FIND, IJ_IMPS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, CM_RIGHT, CM_DOWN, \ + _______, MM_UH, MM_BH, MAC_CPY, MAC_PST, IJ_IMPH, _______, IJ_REN, IJ_IMPL, IJ_DECL, IJ_USAG, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + + [_QWERTY_LINUX_ORTHO] = LAYOUT_ortho_4x12( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, \ + MOLNX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, \ + KC_LCTL, KC_LALT, KC_LGUI, RAISE, P_ADJ, KC_SPC, LOWER, KC_NO, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC), + + [_MOVE_LINUX_ORTHO] = LAYOUT_ortho_4x12( + _______, WM_VD1, WM_UH, WM_VD2, KC_MAC1, KC_MSTP, KC_MPLY, KC_PGUP, KC_HOME, KC_END, KC_PGDN, KC_INS, \ + _______, WM_LH, WM_MAX, WM_RH, KC_MAC2, KC_PSCR, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, CS_RIGHT, CS_DOWN, \ + _______, WM_VD3, WM_BH, OS_COPY, OS_PAST, KC_MPRV, KC_MNXT, KC_MUTE, KC_WBAK, KC_WFWD, KC_WSCH, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + + [_RAISE] = LAYOUT_ortho_4x12( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, \ + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DQUO, \ + _______, KC_UNDO, KC_CUT, OS_COPY, OS_PAST, KC_MPRV, KC_MNXT, KC_MUTE, KC_LT, KC_GT, KC_QUES, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + + [_LOWER] = LAYOUT_ortho_4x12( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, \ + _______, KC_4, KC_5, KC_6, KC_PMNS, KC_PSCR, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_SCLN, KC_QUOT, \ + _______, KC_1, KC_2, KC_3, KC_PPLS, KC_NO, KC_NO, KC_WHOM, KC_WBAK, KC_WFWD, KC_WSCH, _______, \ + _______, KC_0, KC_DOT, KC_ENT, _______, _______, _______, _______, _______, _______, _______, _______), + + [_ADJUST] = LAYOUT_ortho_4x12( + _______, NK_ON, NK_OFF, EEP_RST, RESET, KC_MSTP, KC_WH_L, KC_WH_D, KC_WH_U, KC_WH_R, KC_BTN2, KC_INS, \ + _______, GE_SWAP, GE_NORM, DEBUG, AG_SWAP, AG_NORM, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_BTN1, _______, \ + _______, KC_LYRC, KC_FIRST, KC_CAPS, KC_NO, KC_MPRV, KC_MNXT, KC_MUTE, KC_ACL0, KC_ACL1, KC_ACL2, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______) +}; diff --git a/keyboards/planck/keymaps/dcompact/keymap.c b/keyboards/planck/keymaps/dcompact/keymap.c index cb4cd3f5b9e1..0b48f30ac44f 100644 --- a/keyboards/planck/keymaps/dcompact/keymap.c +++ b/keyboards/planck/keymaps/dcompact/keymap.c @@ -26,6 +26,20 @@ #define WKSP_U LALT(LCTL(KC_UP)) #define WKSP_R LALT(LCTL(KC_RGHT)) +#define AM_CYC A(S(KC_SPC)) +#define AM_SHR A(S(KC_COMM)) +#define AM_GRW A(S(KC_DOT)) +#define AM_REL A(S(KC_Z)) +#define AM_LFT A(S(KC_H)) +#define AM_RGH A(S(KC_L)) +#define AM_CW A(S(KC_K)) +#define AM_CCW A(S(KC_J)) +#define AM_TLL A(S(KC_1)) +#define AM_TLW A(S(KC_2)) +#define AM_BSP A(S(KC_3)) +#define AM_FUL A(S(KC_4)) + + extern keymap_config_t keymap_config; enum planck_layers { @@ -78,19 +92,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Lower * ,-----------------------------------------------------------------------------------. - * | | | | | | | | Home |PgDwn | PgUp | End | | + * | |AmCycl|AmShrk|AmGrow|AmReld| | | Home |PgDwn | PgUp | End | | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | |PrScr | Menu | | | | | Left | Down | Up |Right | | + * | |AmLeft|AmCcw |AmCw |AmRght| | | Left | Down | Up |Right | | * |------+------+------+------+------+------|------+------+------+------+------+------| - * | |CapsLk|NumLck| Ins | | | |WkLeft|WkDown| WkUp |WkRigh| | + * | |AmTall|AmTllW|AmBsp |AmFull| | |WkLeft|WkDown| WkUp |WkRigh| | * |------+------+------+------+------+------+------+------+------+------+------+------| * | | | | | | | |Raise | | | | | * `-----------------------------------------------------------------------------------' */ [_LOWER] = LAYOUT_planck_grid( - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_HOME, KC_PGDN, KC_PGUP, KC_END, XXXXXXX, - XXXXXXX, KC_PSCR, KC_MENU, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, XXXXXXX, - XXXXXXX, KC_CAPS, KC_LNUM, KC_INS, XXXXXXX, XXXXXXX, XXXXXXX, WKSP_L, WKSP_D, WKSP_U, WKSP_R, XXXXXXX, + XXXXXXX, AM_CYC, AM_SHR, AM_GRW, AM_REL, XXXXXXX, XXXXXXX, KC_HOME, KC_PGDN, KC_PGUP, KC_END, XXXXXXX, + XXXXXXX, AM_LFT, AM_CCW, AM_CW, AM_RGH, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, XXXXXXX, + XXXXXXX, AM_TLL, AM_TLW, AM_BSP, AM_FUL, XXXXXXX, XXXXXXX, WKSP_L, WKSP_D, WKSP_U, WKSP_R, XXXXXXX, _______, XXXXXXX, _______, _______, _______, _______, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX ), diff --git a/keyboards/preonic/keymaps/badger/keymap.c b/keyboards/preonic/keymaps/badger/keymap.c new file mode 100644 index 000000000000..495cf28c455a --- /dev/null +++ b/keyboards/preonic/keymaps/badger/keymap.c @@ -0,0 +1,74 @@ +/* +Copyright 2020 Dan White + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +// if not REV3, just compile the default keymaps +#ifndef REV3_CONFIG_H +#include "../default/keymap.c" +#else + +#include "ortho.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY_MAC_ORTHO] = LAYOUT_preonic_2x2u( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, \ + MOMAC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, \ + KC_LCTL, KC_LALT, KC_LGUI, RAISE, P_ADJ, KC_SPC, LOWER, KC_RGUI, KC_RALT, MAC_POP), + + [_MOVE_MAC_ORTHO] = LAYOUT_preonic_2x2u( + MAC_FRC, MM_LEFT, MM_RGHT, IJ_TOP, IJ_BOTT, _______, _______, IJ_UP, IJ_DOWN, IJ_BACK, IJ_FWD, KC_BSPC, \ + KC_BACK, IJ_STEP, IJ_INTO, IJ_OUT, IJ_RUN, IJ_STOP, _______, WD_BACK, KC_HOME, KC_END, WD_FRWD, KC_NEXT, \ + _______, MM_LH, MM_MAX, MM_RH, IJ_FIND, IJ_IMPS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, CM_RIGHT, CM_DOWN, \ + _______, MM_UH, MM_BH, MAC_CPY, MAC_PST, IJ_IMPH, _______, IJ_REN, IJ_IMPL, IJ_DECL, IJ_USAG, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + + [_QWERTY_LINUX_ORTHO] = LAYOUT_preonic_2x2u( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, \ + MOLNX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, RAISE, P_ADJ, KC_SPC, LOWER, KC_RALT, KC_RGUI, OS_POP), + + [_MOVE_LINUX_ORTHO] = LAYOUT_preonic_2x2u( + KC_ESC, VD_1, VD_2, VD_3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL, \ + _______, WM_VD1, WM_UH, WM_VD2, KC_MAC1, KC_MSTP, KC_MPLY, KC_PGUP, KC_HOME, KC_END, KC_PGDN, KC_INS, \ + _______, WM_LH, WM_MAX, WM_RH, KC_MAC2, KC_PSCR, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, CS_RIGHT, CS_DOWN, \ + _______, WM_VD3, WM_BH, OS_COPY, OS_PAST, KC_MPRV, KC_MNXT, KC_MUTE, KC_WBAK, KC_WFWD, KC_WSCH, _______, \ + _______, KC_LCTL, KC_LALT, KC_LGUI, _______, _______, _______, _______, _______, _______), + + [_RAISE] = LAYOUT_preonic_2x2u( + KC_TILD, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL, \ + _______, KC_F11, KC_F12, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ + _______, KC_AGIN, KC_STOP, KC_MENU, KC_FIND, KC_MPLY, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_COLN, KC_DQUO, \ + _______, KC_UNDO, KC_CUT, OS_COPY, OS_PAST, KC_MPRV, KC_MNXT, KC_MUTE, KC_LT, KC_GT, KC_QUES, KC_TRNS, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + + [_LOWER] = LAYOUT_preonic_2x2u( + KC_GRV, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ + _______, KC_7, KC_8, KC_9, KC_PMNS, KC_VOLD, KC_VOLU, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ + _______, KC_4, KC_5, KC_6, KC_PPLS, KC_PSCR, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_SCLN, KC_QUOT, \ + _______, KC_1, KC_2, KC_3, KC_PAST, KC_NO, KC_NO, KC_WHOM, KC_WBAK, KC_WFWD, KC_WSCH, _______, \ + _______, KC_0, KC_DOT, KC_ENT, _______, _______, _______, _______, _______, _______), + + [_ADJUST_ORTHO] = LAYOUT_preonic_2x2u( + KC_ESC, AU_ON, AU_OFF, CK_TOGG, CK_UP, CK_DOWN, CK_RST, MU_ON, MU_OFF, MU_TOG, MU_MOD, KC_DEL, \ + _______, NK_ON, NK_OFF, EEP_RST, RESET, KC_MSTP, KC_WH_L, KC_WH_D, KC_WH_U, KC_WH_R, KC_BTN2, KC_INS, \ + _______, GE_SWAP, GE_NORM, DEBUG, AG_SWAP, AG_NORM, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_BTN1, _______, \ + _______, KC_LYRC, KC_FIRST, KC_CAPS, KC_NO, KC_MPRV, KC_MNXT, KC_MUTE, KC_ACL0, KC_ACL1, KC_ACL2, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______) +}; + +#endif diff --git a/keyboards/preonic/keymaps/badger/readme.md b/keyboards/preonic/keymaps/badger/readme.md new file mode 100644 index 000000000000..5e16979605ea --- /dev/null +++ b/keyboards/preonic/keymaps/badger/readme.md @@ -0,0 +1,21 @@ +# A QWERTY-centric preonic layout by [BlueTufa](https://github.com/BlueTufa) + +## Layouts + +### QWERTY +Standard QWERTY layer, but ESC maps to MOVE layer when held down. Dedicated modifier for Adjust layer and a dedicated OS action key. +### RAISE layer +Access to function keys and shifted characters not on Preonic layout. Effort is taken to keep Function keys aligned with corresponding number. Some OS action keys are available in this layer. + +### LOWER layer +Numpad behavior and access to characters not present on Preonic layout. + +### MOVE layer +OS-specific convenience shortcuts. Macros are used to make it easier to adapt these to other operating systems. +Window move and resize, and option to move to a specific virtual desktop. + +### ADJUST layer +The first row is focused on audio config. +Take advantage of the mouse movement keys, as well as toggling common keyboard config settings. +Flash settings are accessed here as well. + diff --git a/keyboards/preonic/keymaps/codecoffeecode/keymap.c b/keyboards/preonic/keymaps/codecoffeecode/keymap.c new file mode 100644 index 000000000000..9264927ecb14 --- /dev/null +++ b/keyboards/preonic/keymaps/codecoffeecode/keymap.c @@ -0,0 +1,81 @@ +/* Copyright 2020 codecoffeecode + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Main Layer + * ,-----------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[0] = LAYOUT_preonic_1x2uC( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, + KC_LCTL, KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ` | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | | | | | | - | | | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[1] = LAYOUT_preonic_1x2uC( + KC_GRV, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY +), + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | Reset| | | | | | - | = | [ | ] | \ | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[2] = LAYOUT_preonic_1x2uC( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + _______, RESET, DEBUG, _______, _______, _______, _______, _______, _______, _______, KC_F12, _______, + _______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +)}; diff --git a/keyboards/preonic/keymaps/codecoffeecode/readme.md b/keyboards/preonic/keymaps/codecoffeecode/readme.md new file mode 100644 index 000000000000..9ec7e95490ba --- /dev/null +++ b/keyboards/preonic/keymaps/codecoffeecode/readme.md @@ -0,0 +1 @@ +# This layout is largely based on codecoffeecode's niu_mini layout \ No newline at end of file diff --git a/keyboards/preonic/keymaps/default/keymap.c b/keyboards/preonic/keymaps/default/keymap.c index d8bb2d5f7541..7ee985ea186d 100644 --- a/keyboards/preonic/keymaps/default/keymap.c +++ b/keyboards/preonic/keymaps/default/keymap.c @@ -50,12 +50,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | * `-----------------------------------------------------------------------------------' */ -[_QWERTY] = LAYOUT_preonic_grid( \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, \ - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, \ - BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ +[_QWERTY] = LAYOUT_preonic_grid( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, + BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT ), /* Colemak @@ -71,12 +71,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | * `-----------------------------------------------------------------------------------' */ -[_COLEMAK] = LAYOUT_preonic_grid( \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_DEL, \ - KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, \ - BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ +[_COLEMAK] = LAYOUT_preonic_grid( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_DEL, + KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, + BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT ), /* Dvorak @@ -92,12 +92,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | * `-----------------------------------------------------------------------------------' */ -[_DVORAK] = LAYOUT_preonic_grid( \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_DEL, \ - KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \ - KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT, \ - BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ +[_DVORAK] = LAYOUT_preonic_grid( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_DEL, + KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT, + BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT ), /* Lower @@ -113,12 +113,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | Next | Vol- | Vol+ | Play | * `-----------------------------------------------------------------------------------' */ -[_LOWER] = LAYOUT_preonic_grid( \ - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \ - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),KC_HOME, KC_END, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +[_LOWER] = LAYOUT_preonic_grid( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),KC_HOME, KC_END, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY ), /* Raise @@ -134,12 +134,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | Next | Vol- | Vol+ | Play | * `-----------------------------------------------------------------------------------' */ -[_RAISE] = LAYOUT_preonic_grid( \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +[_RAISE] = LAYOUT_preonic_grid( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY ), /* Adjust (Lower + Raise) @@ -155,12 +155,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | | | | * `-----------------------------------------------------------------------------------' */ -[_ADJUST] = LAYOUT_preonic_grid( \ - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ - _______, RESET, DEBUG, _______, _______, _______, _______, TERM_ON, TERM_OFF,_______, _______, KC_DEL, \ - _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ - _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ +[_ADJUST] = LAYOUT_preonic_grid( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + _______, RESET, DEBUG, _______, _______, _______, _______, TERM_ON, TERM_OFF,_______, _______, KC_DEL, + _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, + _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) diff --git a/keyboards/preonic/keymaps/drasbeck/config.h b/keyboards/preonic/keymaps/drasbeck/config.h new file mode 100644 index 000000000000..042096f16469 --- /dev/null +++ b/keyboards/preonic/keymaps/drasbeck/config.h @@ -0,0 +1,49 @@ +/* +Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) 2020 Max Drasbeck + * + * You are free to: + * + * Share — copy and redistribute the material in any medium or format + * Adapt — remix, transform, and build upon the material + * for any purpose, even commercially. + * + * The licensor cannot revoke these freedoms as long as you follow the license terms. +*/ + +#pragma once + +#ifdef AUDIO_ENABLE + #define STARTUP_SONG SONG(PREONIC_SOUND) + // #define STARTUP_SONG SONG(NO_SOUND) + + #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND) }//, + // SONG(COLEMAK_SOUND), + // SONG(DVORAK_SOUND) + //} +#endif + +#define MUSIC_MASK (keycode != KC_NO) + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ + +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 2 diff --git a/keyboards/preonic/keymaps/drasbeck/keymap.c b/keyboards/preonic/keymaps/drasbeck/keymap.c new file mode 100644 index 000000000000..d2d30ffa1586 --- /dev/null +++ b/keyboards/preonic/keymaps/drasbeck/keymap.c @@ -0,0 +1,240 @@ +/* Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) 2020 Max Drasbeck + * + * You are free to: + * + * Share — copy and redistribute the material in any medium or format + * Adapt — remix, transform, and build upon the material + * for any purpose, even commercially. + * + * The licensor cannot revoke these freedoms as long as you follow the license terms. + */ + +#include QMK_KEYBOARD_H +#include "muse.h" + +enum preonic_layers { + _QWERTY, + _COLEMAK, + _DVORAK, + _LOWER, + _RAISE, + _ADJUST +}; + +enum preonic_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + BACKLIT +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_QWERTY] = LAYOUT_preonic_grid( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_SFTENT, + KC_LCTL, KC_NO, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_NUBS, KC_LCTL, KC_NO, KC_NO +), + +[_COLEMAK] = LAYOUT_preonic_grid( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_DEL, + KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, + BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +[_DVORAK] = LAYOUT_preonic_grid( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_DEL, + KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT, + BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +[_LOWER] = LAYOUT_preonic_grid( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO , KC_PGUP, KC_MINS, KC_EQL, KC_RBRC, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_NO, KC_HOME, KC_PGDN, KC_END, KC_NO, KC_NUHS, + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, KC_NO, KC_NO, KC_RO, KC_ENT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MPLY +), + +[_RAISE] = LAYOUT_preonic_grid( + KC_TRNS, RALT(KC_1), RALT(KC_2), RALT(KC_3), RALT(KC_4), RALT(KC_5), RALT(KC_6), RALT(KC_7), RALT(KC_8), RALT(KC_9), RALT(KC_0), KC_DEL, + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_UP, KC_MINS, KC_EQL, KC_RBRC, + KC_ESC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NUHS, + KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_VOLD, KC_VOLU, KC_MUTE, KC_RO, KC_SFTENT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_RALT, KC_TRNS, KC_TRNS, KC_TRNS, RALT(KC_NUBS), KC_TRNS, KC_VOLD, KC_VOLU, KC_MPLY +), + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|AudOff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|MusOff|MidiOn|MidOff| | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = LAYOUT_preonic_grid( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + _______, RESET, DEBUG, _______, _______, _______, _______, TERM_ON, TERM_OFF,_______, _______, KC_DEL, + _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, + _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +) + + +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + #ifdef __AVR__ + writePinLow(E6); + #endif + } else { + unregister_code(KC_RSFT); + #ifdef __AVR__ + writePinHigh(E6); + #endif + } + return false; + break; + } + return true; +}; + +bool muse_mode = false; +uint8_t last_muse_note = 0; +uint16_t muse_counter = 0; +uint8_t muse_offset = 70; +uint16_t muse_tempo = 50; + +void encoder_update_user(uint8_t index, bool clockwise) { + if (muse_mode) { + if (IS_LAYER_ON(_RAISE)) { + if (clockwise) { + muse_offset++; + } else { + muse_offset--; + } + } else { + if (clockwise) { + muse_tempo+=1; + } else { + muse_tempo-=1; + } + } + } else { + if (clockwise) { + register_code(KC_PGDN); + unregister_code(KC_PGDN); + } else { + register_code(KC_PGUP); + unregister_code(KC_PGUP); + } + } +} + +void dip_switch_update_user(uint8_t index, bool active) { + switch (index) { + case 0: + if (active) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + break; + case 1: + if (active) { + muse_mode = true; + } else { + muse_mode = false; + } + } +} + + +void matrix_scan_user(void) { +#ifdef AUDIO_ENABLE + if (muse_mode) { + if (muse_counter == 0) { + uint8_t muse_note = muse_offset + SCALE[muse_clock_pulse()]; + if (muse_note != last_muse_note) { + stop_note(compute_freq_for_midi_note(last_muse_note)); + play_note(compute_freq_for_midi_note(muse_note), 0xF); + last_muse_note = muse_note; + } + } + muse_counter = (muse_counter + 1) % muse_tempo; + } else { + if (muse_counter) { + stop_all_notes(); + muse_counter = 0; + } + } +#endif +} + +bool music_mask_user(uint16_t keycode) { + switch (keycode) { + case RAISE: + case LOWER: + return false; + default: + return true; + } +} diff --git a/keyboards/preonic/keymaps/drasbeck/readme.md b/keyboards/preonic/keymaps/drasbeck/readme.md new file mode 100644 index 000000000000..4975ae8b7087 --- /dev/null +++ b/keyboards/preonic/keymaps/drasbeck/readme.md @@ -0,0 +1,17 @@ +# drasbeck's Preonic keymap +Danish layout with Danish characters on default layer. + +``` +Default +,-----------------------------------------------------------------------------------. +|KC_GRV| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | BSPC | +|------+------+------+------+------+------+------+------+------+------+------+------| +| TAB | q | w | e | r | t | y | u | i | o | p | å | +|------+------+------+------+------+-------------+------+------+------+------+------| +| ESC | a | s | d | f | g | h | j | k | l | æ | ø | +|------+------+------+------+------+------|------+------+------+------+------+------| +|L SHFT| z | x | c | v | b | n | m | , | . | - |SFTENT| +|------+------+------+------+------+------+------+------+------+------+------+------| +|L CTRL| | L ALT| L GUI| LOWER| SPACE | RAISE| NUBS | L CTL| | | +`-----------------------------------------------------------------------------------' +``` diff --git a/keyboards/preonic/keymaps/drasbeck/rules.mk b/keyboards/preonic/keymaps/drasbeck/rules.mk new file mode 100644 index 000000000000..dcf16bef3994 --- /dev/null +++ b/keyboards/preonic/keymaps/drasbeck/rules.mk @@ -0,0 +1 @@ +SRC += muse.c diff --git a/keyboards/preonic/keymaps/pezhore/config.h b/keyboards/preonic/keymaps/pezhore/config.h new file mode 100644 index 000000000000..8b541544b13e --- /dev/null +++ b/keyboards/preonic/keymaps/pezhore/config.h @@ -0,0 +1,53 @@ +/* Copyright 2015-2017 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once +#define UNICODE_SELECTED_MODES UC_WINC, UC_LNX, UC_MAC +#ifdef AUDIO_ENABLE + #define STARTUP_SONG SONG(PREONIC_SOUND) + // #define STARTUP_SONG SONG(NO_SOUND) + + #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \ + SONG(COLEMAK_SOUND), \ + SONG(DVORAK_SOUND) \ + } +#endif + +#define MUSIC_MASK (keycode != KC_NO) + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ + +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 2 diff --git a/keyboards/preonic/keymaps/pezhore/keymap.c b/keyboards/preonic/keymaps/pezhore/keymap.c new file mode 100644 index 000000000000..39b045d6d38d --- /dev/null +++ b/keyboards/preonic/keymaps/pezhore/keymap.c @@ -0,0 +1,307 @@ +/* Copyright 2015-2017 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +#include "muse.h" + +enum preonic_layers { + _QWERTY, + _FN, + _NUMPAD, + _LOWER, + _RAISE, + _ADJUST +}; + +enum preonic_keycodes { + LOWER = SAFE_RANGE, + RAISE, + SHRUG, // ¯\_(ツ)_/¯ + TFLIP, // (╯°□°)╯︵ ┻━┻ + POOP, // 💩 + DPOINT, // (ಠ_ಠ) + STRUT // ᕕ( ᐛ )ᕗ +}; + +#define TG_NUMP TG(_NUMPAD) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | FN | Ctrl | GUI | ALT |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = LAYOUT_preonic_grid( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, + MO(_FN), KC_LCTL, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* FN + * ,-----------------------------------------------------------------------------------. + * |RGBTgl|Brigt-|Brigt+| | | | | | | | | POOP | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | RGB+ | Hue- | Hue+ | | | | | | | |PrtScr|UC_MOD| + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | RGB- | Sat- | Sat+ | | | | | | | | |UC_Wnc| + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Effct-|Effct+| | | | | | | | |UC_Lin| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | |SHRUG |TFLIP |DPOINT|STRUT | | | | |TgNmpd| |UC_Mac| + * `-----------------------------------------------------------------------------------' + */ +[_FN] = LAYOUT_preonic_grid( + RGB_TOG, RGB_VAD, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, POOP, + RGB_MOD, RGB_HUD, RGB_HUI, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, UC_MOD, + RGB_RMOD, RGB_SAD, RGB_SAI, _______, _______, _______, _______, _______, _______, _______, _______, UC_M_WC, + _______, RGB_SPD, RGB_SPI, _______, _______, _______, _______, _______, _______, _______, _______, UC_M_LN, + _______, SHRUG, TFLIP, DPOINT, STRUT, _______, _______, _______, _______, TG_NUMP, _______, UC_M_MA +), + +/* Numpad + * ,-----------------------------------------------------------------------------------. + * | | | | | | |NumLk | 7 | 8 | 9 | / | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | | | | | | | 4 | 5 | 6 | * | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | | | | | | | 1 | 2 | 3 | - | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | | 0 | . | = | + |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_NUMPAD] = LAYOUT_preonic_grid( + _______, _______, _______, _______, _______, _______, KC_NLCK, KC_P7, KC_P8, KC_P9, KC_PSLS, KC_BSPC, + KC_ESC, _______, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_PAST, KC_DEL, + KC_TAB, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, KC_PMNS, _______, + _______, _______, _______, _______, _______, _______, _______, KC_P0, KC_PDOT, KC_PEQL, KC_PPLS, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +), + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | | | | | | | | | | | | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | |Raise | Home | PgDn | PgUp | End | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = LAYOUT_preonic_grid( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BSPC, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END +), + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | | | | | | | | | | | | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | Prev | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | |Lower | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = LAYOUT_preonic_grid( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BSPC, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MPRV, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY +), + + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|AudOff|AGnorm|AGswap| | | | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|MusOff|MidiOn|MidOff| | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = LAYOUT_preonic_grid( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + _______, RESET, DEBUG, _______, _______, _______, _______, TERM_ON, TERM_OFF, _______, _______, KC_DEL, + _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, _______, _______, _______, _______, _______, + _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +) + + +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case SHRUG: + if (record->event.pressed) { + send_unicode_string("¯\\_(ツ)_/¯"); + } + return false; + break; + case TFLIP: + if (record->event.pressed) { + send_unicode_string("(╯°□°)╯︵ ┻━┻"); + } + return false; + break; + case POOP: + if (record->event.pressed) { + send_unicode_string("💩"); + } + return false; + break; + case DPOINT: + if (record->event.pressed) { + send_unicode_string("(ಠ_ಠ)"); + } + return false; + break; + case STRUT: + if (record->event.pressed) { + send_unicode_string("ᕕ( ᐛ )ᕗ"); + } + return false; + break; + } + return true; +}; + +bool muse_mode = false; +uint8_t last_muse_note = 0; +uint16_t muse_counter = 0; +uint8_t muse_offset = 70; +uint16_t muse_tempo = 50; + +void encoder_update_user(uint8_t index, bool clockwise) { + if (muse_mode) { + if (IS_LAYER_ON(_RAISE)) { + if (clockwise) { + muse_offset++; + } else { + muse_offset--; + } + } else { + if (clockwise) { + muse_tempo+=1; + } else { + muse_tempo-=1; + } + } + } else { + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } +} + +void dip_switch_update_user(uint8_t index, bool active) { + switch (index) { + case 0: + if (active) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + break; + case 1: + if (active) { + muse_mode = true; + } else { + muse_mode = false; + } + } +} + + +void matrix_scan_user(void) { +#ifdef AUDIO_ENABLE + if (muse_mode) { + if (muse_counter == 0) { + uint8_t muse_note = muse_offset + SCALE[muse_clock_pulse()]; + if (muse_note != last_muse_note) { + stop_note(compute_freq_for_midi_note(last_muse_note)); + play_note(compute_freq_for_midi_note(muse_note), 0xF); + last_muse_note = muse_note; + } + } + muse_counter = (muse_counter + 1) % muse_tempo; + } else { + if (muse_counter) { + stop_all_notes(); + muse_counter = 0; + } + } +#endif +} + +bool music_mask_user(uint16_t keycode) { + switch (keycode) { + case RAISE: + case LOWER: + return false; + default: + return true; + } +} diff --git a/keyboards/preonic/keymaps/pezhore/readme.md b/keyboards/preonic/keymaps/pezhore/readme.md new file mode 100644 index 000000000000..e911968dd964 --- /dev/null +++ b/keyboards/preonic/keymaps/pezhore/readme.md @@ -0,0 +1 @@ +# The default Preonic layout - largely based on the Planck's \ No newline at end of file diff --git a/keyboards/preonic/keymaps/pezhore/rules.mk b/keyboards/preonic/keymaps/pezhore/rules.mk new file mode 100644 index 000000000000..23198218b43f --- /dev/null +++ b/keyboards/preonic/keymaps/pezhore/rules.mk @@ -0,0 +1,3 @@ +SRC += muse.c +#UNICODEMAP_ENABLE = yes +UNICODE_ENABLE = yes \ No newline at end of file diff --git a/keyboards/primekb/meridian/chconf.h b/keyboards/primekb/meridian/chconf.h new file mode 100644 index 000000000000..03f63da36a88 --- /dev/null +++ b/keyboards/primekb/meridian/chconf.h @@ -0,0 +1,714 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file rt/templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ +#define _CHIBIOS_RT_CONF_VER_6_0_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_ST_RESOLUTION) +#define CH_CFG_ST_RESOLUTION 32 +#endif + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#if !defined(CH_CFG_ST_FREQUENCY) +#define CH_CFG_ST_FREQUENCY 10000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#if !defined(CH_CFG_ST_TIMEDELTA) +#define CH_CFG_ST_TIMEDELTA 2 +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 0 +#endif + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#if !defined(CH_CFG_MEMCORE_SIZE) +#define CH_CFG_MEMCORE_SIZE 0 +#endif + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#if !defined(CH_CFG_NO_IDLE_THREAD) +#define CH_CFG_NO_IDLE_THREAD FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) +#define CH_CFG_OPTIMIZE_SPEED FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_TM) +#define CH_CFG_USE_TM FALSE +#endif + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_REGISTRY) +#define CH_CFG_USE_REGISTRY TRUE +#endif + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_WAITEXIT) +#define CH_CFG_USE_WAITEXIT TRUE +#endif + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_SEMAPHORES) +#define CH_CFG_USE_SEMAPHORES TRUE +#endif + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MUTEXES) +#define CH_CFG_USE_MUTEXES TRUE +#endif + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_CONDVARS) +#define CH_CFG_USE_CONDVARS TRUE +#endif + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE +#endif + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_EVENTS) +#define CH_CFG_USE_EVENTS TRUE +#endif + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MESSAGES) +#define CH_CFG_USE_MESSAGES TRUE +#endif + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_MAILBOXES) +#define CH_CFG_USE_MAILBOXES TRUE +#endif + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMCORE) +#define CH_CFG_USE_MEMCORE TRUE +#endif + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#if !defined(CH_CFG_USE_HEAP) +#define CH_CFG_USE_HEAP FALSE +#endif + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMPOOLS) +#define CH_CFG_USE_MEMPOOLS FALSE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS FALSE +#endif + +/** + * @brief Pipes APIs. + * @details If enabled then the pipes APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_PIPES) +#define CH_CFG_USE_PIPES FALSE +#endif + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#if !defined(CH_CFG_USE_DYNAMIC) +#define CH_CFG_USE_DYNAMIC FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY FALSE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES FALSE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES FALSE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS FALSE +#endif + +/** + * @brief Enables factory for Pipes. + */ +#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) +#define CH_CFG_FACTORY_PIPES FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_STATISTICS) +#define CH_DBG_STATISTICS FALSE +#endif + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) +#define CH_DBG_SYSTEM_STATE_CHECK FALSE +#endif + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS FALSE +#endif + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS FALSE +#endif + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK FALSE +#endif + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS FALSE +#endif + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#if !defined(CH_DBG_THREADS_PROFILING) +#define CH_DBG_THREADS_PROFILING FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p _thread_init() function. + * + * @note It is invoked from within @p _thread_init() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/primekb/meridian/config.h b/keyboards/primekb/meridian/config.h new file mode 100644 index 000000000000..9194023abb33 --- /dev/null +++ b/keyboards/primekb/meridian/config.h @@ -0,0 +1,46 @@ +/* +Copyright 2020 Holten Campbell + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5052 +#define PRODUCT_ID 0x004D +#define DEVICE_VER 0x0001 +#define MANUFACTURER Prime Keyboards +#define PRODUCT Meridian + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +#define MATRIX_COL_PINS { B11, B10, B2, B1, B0, A7, B9, B8, B7, B6, B5, B4, B3, A15 } +#define MATRIX_ROW_PINS { A6, A5, A4, A3, A2 } +#define DIODE_DIRECTION COL2ROW + +#define RGB_DI_PIN B15 +#define RGBLED_NUM 3 +#define WS2812_SPI SPID2 +#define WS2812_SPI_MOSI_PAL_MODE 0 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE diff --git a/keyboards/primekb/meridian/halconf.h b/keyboards/primekb/meridian/halconf.h new file mode 100644 index 000000000000..adb1a907154b --- /dev/null +++ b/keyboards/primekb/meridian/halconf.h @@ -0,0 +1,525 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#define _CHIBIOS_HAL_CONF_ +#define _CHIBIOS_HAL_CONF_VER_7_0_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C TRUE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM TRUE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SIO subsystem. + */ +#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) +#define HAL_USE_SIO FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI TRUE +#endif + +/** + * @brief Enables the TRNG subsystem. + */ +#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) +#define HAL_USE_TRNG FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/** + * @brief Enables the WSPI subsystem. + */ +#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) +#define HAL_USE_WSPI FALSE +#endif + +/*===========================================================================*/ +/* PAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) +#define PAL_USE_CALLBACKS FALSE +#endif + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) +#define PAL_USE_WAIT FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/** + * @brief Enforces the driver to use direct callbacks rather than OSAL events. + */ +#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) +#define CAN_ENFORCE_USE_CALLBACKS FALSE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* DAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) +#define DAC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define DAC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the zero-copy API. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/** + * @brief OCR initialization constant for V20 cards. + */ +#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) +#define SDC_INIT_OCR_V20 0x50FF8000U +#endif + +/** + * @brief OCR initialization constant for non-V20 cards. + */ +#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) +#define SDC_INIT_OCR 0x80100000U +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 1 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables circular transfers APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) +#define SPI_USE_CIRCULAR FALSE +#endif + + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/** + * @brief Handling method for SPI CS line. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) +#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +/*===========================================================================*/ +/* WSPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) +#define WSPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define WSPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/keyboards/primekb/meridian/info.json b/keyboards/primekb/meridian/info.json new file mode 100644 index 000000000000..3397ae500a99 --- /dev/null +++ b/keyboards/primekb/meridian/info.json @@ -0,0 +1,15 @@ +{ + "keyboard_name": "Meridian", + "url": "https://www.primekb.com", + "maintainer": "holtenc", + "width": 16.5, + "height": 5, + "layouts": { + "LAYOUT_unified_bs_rshift": { + "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":8.5, "y":0}, {"label":"*", "x":9.5, "y":0}, {"label":"(", "x":10.5, "y":0}, {"label":")", "x":11.5, "y":0}, {"label":"_", "x":12.5, "y":0}, {"label":"+", "x":13.5, "y":0}, {"label":"Backspace", "x":14.5, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":8, "y":1}, {"label":"U", "x":9, "y":1}, {"label":"I", "x":10, "y":1}, {"label":"O", "x":11, "y":1}, {"label":"P", "x":12, "y":1}, {"label":"{", "x":13, "y":1}, {"label":"}", "x":14, "y":1}, {"label":"|", "x":15, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":8.25, "y":2}, {"label":"J", "x":9.25, "y":2}, {"label":"K", "x":10.25, "y":2}, {"label":"L", "x":11.25, "y":2}, {"label":":", "x":12.25, "y":2}, {"label":"\"", "x":13.25, "y":2}, {"label":"Enter", "x":14.25, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"B", "x":7.75, "y":3}, {"label":"N", "x":8.75, "y":3}, {"label":"M", "x":9.75, "y":3}, {"label":"<", "x":10.75, "y":3}, {"label":">", "x":11.75, "y":3}, {"label":"?", "x":12.75, "y":3}, {"label":"Shift", "x":13.75, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":3.75, "y":4, "w":1.25}, {"x":5, "y":4, "w":2.25}, {"x":7.75, "y":4, "w":2.75}, {"label":"Alt", "x":10.5, "y":4, "w":1.25}, {"label":"Win", "x":12.75, "y":4, "w":1.25}, {"label":"Menu", "x":14, "y":4, "w":1.25}, {"label":"Ctrl", "x":15.25, "y":4, "w":1.25}] + }, + "LAYOUT_split_bs_rshift": { + "layout":[{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":8.5, "y":0}, {"label":"*", "x":9.5, "y":0}, {"label":"(", "x":10.5, "y":0}, {"label":")", "x":11.5, "y":0}, {"label":"_", "x":12.5, "y":0}, {"label":"+", "x":13.5, "y":0}, {"label":"Del", "x":14.5, "y":0}, {"label":"Backspace", "x":15.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":8, "y":1}, {"label":"U", "x":9, "y":1}, {"label":"I", "x":10, "y":1}, {"label":"O", "x":11, "y":1}, {"label":"P", "x":12, "y":1}, {"label":"{", "x":13, "y":1}, {"label":"}", "x":14, "y":1}, {"label":"|", "x":15, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":8.25, "y":2}, {"label":"J", "x":9.25, "y":2}, {"label":"K", "x":10.25, "y":2}, {"label":"L", "x":11.25, "y":2}, {"label":":", "x":12.25, "y":2}, {"label":"\"", "x":13.25, "y":2}, {"label":"Enter", "x":14.25, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"B", "x":7.75, "y":3}, {"label":"N", "x":8.75, "y":3}, {"label":"M", "x":9.75, "y":3}, {"label":"<", "x":10.75, "y":3}, {"label":">", "x":11.75, "y":3}, {"label":"?", "x":12.75, "y":3}, {"label":"Shift", "x":13.75, "y":3, "w":1.75}, {"label":"Fn", "x":15.5, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":3.75, "y":4, "w":1.25}, {"x":5, "y":4, "w":2.25}, {"x":7.75, "y":4, "w":2.75}, {"label":"Alt", "x":10.5, "y":4, "w":1.25}, {"label":"Win", "x":12.75, "y":4, "w":1.25}, {"label":"Menu", "x":14, "y":4, "w":1.25}, {"label":"Ctrl", "x":15.25, "y":4, "w":1.25}] + } + } +} diff --git a/keyboards/primekb/meridian/keymaps/default/keymap.c b/keyboards/primekb/meridian/keymaps/default/keymap.c new file mode 100644 index 000000000000..2ea91eeb133d --- /dev/null +++ b/keyboards/primekb/meridian/keymaps/default/keymap.c @@ -0,0 +1,35 @@ +/* +Copyright 2020 Holten Campbell + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_split_bs_rshift( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, MO(1), KC_SPC, KC_RALT, KC_RGUI, KC_RGUI, KC_RCTL + ), + [1] = LAYOUT_split_bs_rshift( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_BSPC, + _______, _______, KC_PGUP, _______, _______, _______, _______, _______, KC_UP, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, + _______, KC_HOME, KC_PGDN, KC_END, _______, KC_VOLD, KC_VOLU, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/primekb/meridian/keymaps/via/keymap.c b/keyboards/primekb/meridian/keymaps/via/keymap.c new file mode 100644 index 000000000000..9c314d657c51 --- /dev/null +++ b/keyboards/primekb/meridian/keymaps/via/keymap.c @@ -0,0 +1,49 @@ +/* +Copyright 2020 Holten Campbell + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_split_bs_rshift( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, MO(1), KC_SPC, KC_RALT, KC_RGUI, KC_RGUI, KC_RCTL + ), + [1] = LAYOUT_split_bs_rshift( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_BSPC, + _______, _______, KC_PGUP, _______, _______, _______, _______, _______, KC_UP, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, + _______, KC_HOME, KC_PGDN, KC_END, _______, KC_VOLD, KC_VOLU, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [2] = LAYOUT_split_bs_rshift( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [3] = LAYOUT_split_bs_rshift( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/primekb/meridian/keymaps/via/rules.mk b/keyboards/primekb/meridian/keymaps/via/rules.mk new file mode 100644 index 000000000000..1e5b99807cb7 --- /dev/null +++ b/keyboards/primekb/meridian/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/primekb/meridian/mcuconf.h b/keyboards/primekb/meridian/mcuconf.h new file mode 100644 index 000000000000..048eb4df650d --- /dev/null +++ b/keyboards/primekb/meridian/mcuconf.h @@ -0,0 +1,176 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +/* + * STM32F0xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 3...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F0xx_MCUCONF +// #define STM32F070xB + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_HSI14_ENABLED TRUE +#define STM32_HSI48_ENABLED FALSE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED FALSE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 12 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE STM32_PPRE_DIV1 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_USBSW STM32_USBSW_HSI48 +#define STM32_CECSW STM32_CECSW_HSI +#define STM32_I2C1SW STM32_I2C1SW_HSI +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_RTCSEL STM32_RTCSEL_LSI + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 2 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 2 +#define STM32_GPT_TIM2_IRQ_PRIORITY 2 +#define STM32_GPT_TIM3_IRQ_PRIORITY 2 +#define STM32_GPT_TIM14_IRQ_PRIORITY 2 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 TRUE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 3 +#define STM32_I2C_I2C2_IRQ_PRIORITY 3 +#define STM32_I2C_USE_DMA TRUE +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 3 +#define STM32_ICU_TIM2_IRQ_PRIORITY 3 +#define STM32_ICU_TIM3_IRQ_PRIORITY 3 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 TRUE +#define STM32_PWM_TIM1_IRQ_PRIORITY 3 +#define STM32_PWM_TIM2_IRQ_PRIORITY 3 +#define STM32_PWM_TIM3_IRQ_PRIORITY 3 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USART1_PRIORITY 3 +#define STM32_SERIAL_USART2_PRIORITY 3 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 TRUE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 2 +#define STM32_SPI_SPI2_IRQ_PRIORITY 2 +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 2 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 3 +#define STM32_UART_USART2_IRQ_PRIORITY 3 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 TRUE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 + +#endif /* _MCUCONF_H_ */ diff --git a/keyboards/primekb/meridian/meridian.c b/keyboards/primekb/meridian/meridian.c new file mode 100644 index 000000000000..8d94faf9eab9 --- /dev/null +++ b/keyboards/primekb/meridian/meridian.c @@ -0,0 +1,68 @@ +/* +Copyright 2020 Holten Campbell + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "meridian.h" + +//Initialize B12 for in-switch caps lock +void keyboard_pre_init_kb(void){ + setPinOutput(B12); + keyboard_pre_init_user(); +} + +//Initialize all RGB indicators to 'off' +__attribute__((weak)) +void keyboard_post_init_user(void) { + rgblight_setrgb_at(0, 0, 0, 0); // [..., 0] = top LED + rgblight_setrgb_at(0, 0, 0, 1); // [..., 1] = middle LED + rgblight_setrgb_at(0, 0, 0, 2); // [..., 2] = bottom LED +} + +//Indicator light function +bool led_update_kb(led_t led_state) { + bool res = led_update_user(led_state); + if (res) { + // writePin(B12, !led_state.caps_lock); //Un-comment this line to enable in-switch capslock indicator + if (led_state.caps_lock) { + rgblight_setrgb_at(0, 255, 0, 0); //green + } else { + rgblight_setrgb_at(0, 0, 0, 0); + } + if (led_state.num_lock) { + rgblight_setrgb_at(0, 0, 255, 1); //blue + } else { + rgblight_setrgb_at(0, 0, 0, 1); + } + if (led_state.scroll_lock) { + rgblight_setrgb_at(255, 0, 0, 2); //red + } else { + rgblight_setrgb_at(0, 0, 0, 2); + } +} + return res; +} + +//Below is an exmaple of layer indication using one of the RGB indicatiors. As configured, uses the bottom indicator (2) to light up red when layer 1 is in use. +/* +layer_state_t layer_state_set_kb(layer_state_t state) { + if (get_highest_layer(state) == 1) { + rgblight_setrgb_at(255, 0, 0, 2); + } else { + rgblight_setrgb_at(0, 0, 0, 2); + } + return state; +} +*/ diff --git a/keyboards/primekb/meridian/meridian.h b/keyboards/primekb/meridian/meridian.h new file mode 100644 index 000000000000..e6a155ddec9c --- /dev/null +++ b/keyboards/primekb/meridian/meridian.h @@ -0,0 +1,52 @@ +/* +Copyright 2020 Holten Campbell + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "quantum.h" + +#define K_NO KC_NO + +#define LAYOUT_unified_bs_rshift( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K213, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, \ + K400, K401, K402, K404, K407, K409, K411, K412, K413 \ +) \ +{ \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K_NO, K213 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K_NO}, \ + { K400, K401, K402, K_NO, K404, K_NO, K_NO, K407, K_NO, K409, K_NO, K411, K412, K413 } \ +} + +#define LAYOUT_split_bs_rshift( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K212, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K213, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, \ + K400, K401, K402, K404, K407, K409, K411, K412, K413 \ +) \ +{ \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313 }, \ + { K400, K401, K402, K_NO, K404, K_NO, K_NO, K407, K_NO, K409, K_NO, K411, K412, K413 } \ +} diff --git a/keyboards/primekb/meridian/readme.md b/keyboards/primekb/meridian/readme.md new file mode 100644 index 000000000000..0e3339a59743 --- /dev/null +++ b/keyboards/primekb/meridian/readme.md @@ -0,0 +1,12 @@ +# ai03 x PrimeKB Meridian + +![Meridian](https://i.imgur.com/c90ZTJJl.jpg) + +* Keyboard Maintainer: [Holten Campbell](https://github.com/holtenc) +* Hardware Supported: STM32F072CBT6 + +Make example for this keyboard (after setting up your build environment): + + make primekb/meridian:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/primekb/meridian/rules.mk b/keyboards/primekb/meridian/rules.mk new file mode 100644 index 000000000000..9e2f958bee89 --- /dev/null +++ b/keyboards/primekb/meridian/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = STM32F072 + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output +WS2812_DRIVER = spi + +# Enter lower-power sleep mode when on the ChibiOS idle thread +OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/katana60/config.h b/keyboards/rominronin/katana60/rev1/config.h similarity index 54% rename from keyboards/katana60/config.h rename to keyboards/rominronin/katana60/rev1/config.h index 3385ddb9cb7b..fe10d1a533d7 100644 --- a/keyboards/katana60/config.h +++ b/keyboards/rominronin/katana60/rev1/config.h @@ -15,18 +15,16 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" /* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 +#define VENDOR_ID 0x7272 // "rr" - rominronin +#define PRODUCT_ID 0x0C2C #define DEVICE_VER 0x0001 #define MANUFACTURER RominRonin CandyKeys -#define PRODUCT Katana60 -#define DESCRIPTION QMK keyboard firmware for Katana60 +#define PRODUCT Katana60 rev1 /* key matrix size */ #define MATRIX_ROWS 5 @@ -49,18 +47,12 @@ along with this program. If not, see . /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -92,56 +84,8 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - #define TAPPING_TERM 200 -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -159,28 +103,3 @@ along with this program. If not, see . //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -#endif diff --git a/keyboards/rominronin/katana60/rev1/info.json b/keyboards/rominronin/katana60/rev1/info.json new file mode 100644 index 000000000000..fa0aa93d67ba --- /dev/null +++ b/keyboards/rominronin/katana60/rev1/info.json @@ -0,0 +1,83 @@ +{ + "keyboard_name": "Katana60 rev1", + "url": "", + "maintainer": "rominronin", + "width": 15, + "height": 5, + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"k40", "x":0, "y":0}, + {"label":"k41", "x":1, "y":0}, + {"label":"k42", "x":2, "y":0}, + {"label":"k43", "x":3, "y":0}, + {"label":"k44", "x":4, "y":0}, + {"label":"k45", "x":5, "y":0}, + {"label":"k46", "x":6, "y":0}, + {"label":"k47", "x":7, "y":0}, + {"label":"k48", "x":8, "y":0}, + {"label":"k49", "x":9, "y":0}, + {"label":"k4a", "x":10, "y":0}, + {"label":"k4b", "x":11, "y":0}, + {"label":"k4c", "x":12, "y":0}, + {"label":"k4d", "x":13, "y":0}, + {"label":"k4e", "x":14, "y":0}, + {"label":"k30", "x":0, "y":1, "w":1.5}, + {"label":"k31", "x":1.5, "y":1}, + {"label":"k32", "x":2.5, "y":1}, + {"label":"k33", "x":3.5, "y":1}, + {"label":"k34", "x":4.5, "y":1}, + {"label":"k35", "x":5.5, "y":1}, + {"label":"k36", "x":6.5, "y":1}, + {"label":"k37", "x":7.5, "y":1}, + {"label":"k38", "x":8.5, "y":1}, + {"label":"k39", "x":9.5, "y":1}, + {"label":"k3a", "x":10.5, "y":1}, + {"label":"k3b", "x":11.5, "y":1}, + {"label":"k3c", "x":12.5, "y":1}, + {"label":"k3d", "x":13.5, "y":1, "w":1.5}, + {"label":"k20", "x":0, "y":2, "w":1.25}, + {"label":"k21", "x":1.25, "y":2}, + {"label":"k22", "x":2.25, "y":2}, + {"label":"k23", "x":3.25, "y":2}, + {"label":"k24", "x":4.25, "y":2}, + {"label":"k25", "x":5.25, "y":2}, + {"label":"k26", "x":6.25, "y":2}, + {"label":"k27", "x":7.75, "y":2}, + {"label":"k28", "x":8.75, "y":2}, + {"label":"k29", "x":9.75, "y":2}, + {"label":"k2a", "x":10.75, "y":2}, + {"label":"k2b", "x":11.75, "y":2}, + {"label":"k2c", "x":12.75, "y":2}, + {"label":"k2d", "x":13.75, "y":2, "w":1.25}, + {"label":"k10", "x":0, "y":3}, + {"label":"k11", "x":1, "y":3}, + {"label":"k12", "x":2, "y":3}, + {"label":"k13", "x":3, "y":3}, + {"label":"k14", "x":4, "y":3}, + {"label":"k15", "x":5, "y":3}, + {"label":"k16", "x":6, "y":3}, + {"label":"k17", "x":7, "y":3}, + {"label":"k18", "x":8, "y":3}, + {"label":"k19", "x":9, "y":3}, + {"label":"k1a", "x":10, "y":3}, + {"label":"k1b", "x":11, "y":3}, + {"label":"k1c", "x":12, "y":3}, + {"label":"k1d", "x":13, "y":3}, + {"label":"k1e", "x":14, "y":3}, + {"label":"k00", "x":0, "y":4}, + {"label":"k01", "x":1, "y":4, "w":1.25}, + {"label":"k02", "x":2.25, "y":4, "w":1.25}, + {"label":"k03", "x":3.5, "y":4, "w":1.25}, + {"label":"k04", "x":4.75, "y":4, "w":2.25}, + {"label":"k05", "x":7, "y":4}, + {"label":"k06", "x":8, "y":4, "w":2}, + {"label":"k09", "x":10, "y":4}, + {"label":"k0a", "x":11, "y":4}, + {"label":"k0b", "x":12, "y":4}, + {"label":"k0c", "x":13, "y":4}, + {"label":"k0d", "x":14, "y":4} + ] + } + } +} diff --git a/keyboards/katana60/keymaps/colemak/config.h b/keyboards/rominronin/katana60/rev1/keymaps/colemak/config.h similarity index 100% rename from keyboards/katana60/keymaps/colemak/config.h rename to keyboards/rominronin/katana60/rev1/keymaps/colemak/config.h diff --git a/keyboards/katana60/keymaps/colemak/keymap.c b/keyboards/rominronin/katana60/rev1/keymaps/colemak/keymap.c similarity index 99% rename from keyboards/katana60/keymaps/colemak/keymap.c rename to keyboards/rominronin/katana60/rev1/keymaps/colemak/keymap.c index b0ed04185435..91128bd5c43f 100644 --- a/keyboards/katana60/keymaps/colemak/keymap.c +++ b/keyboards/rominronin/katana60/rev1/keymaps/colemak/keymap.c @@ -34,7 +34,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT( /* Base */ - KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, DF(1), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_PLUS, + KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, DF(1), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_LBRC, KC_RBRC, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, MO(3), KC_A, KC_R, KC_S, KC_T, KC_D, KC_HOME, KC_PGUP, KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_END, KC_DEL, KC_PGDN, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, diff --git a/keyboards/katana60/keymaps/colemak/readme.md b/keyboards/rominronin/katana60/rev1/keymaps/colemak/readme.md similarity index 100% rename from keyboards/katana60/keymaps/colemak/readme.md rename to keyboards/rominronin/katana60/rev1/keymaps/colemak/readme.md diff --git a/keyboards/katana60/keymaps/default/config.h b/keyboards/rominronin/katana60/rev1/keymaps/default/config.h similarity index 100% rename from keyboards/katana60/keymaps/default/config.h rename to keyboards/rominronin/katana60/rev1/keymaps/default/config.h diff --git a/keyboards/katana60/keymaps/default/keymap.c b/keyboards/rominronin/katana60/rev1/keymaps/default/keymap.c similarity index 100% rename from keyboards/katana60/keymaps/default/keymap.c rename to keyboards/rominronin/katana60/rev1/keymaps/default/keymap.c diff --git a/keyboards/katana60/keymaps/default/readme.md b/keyboards/rominronin/katana60/rev1/keymaps/default/readme.md similarity index 100% rename from keyboards/katana60/keymaps/default/readme.md rename to keyboards/rominronin/katana60/rev1/keymaps/default/readme.md diff --git a/keyboards/katana60/keymaps/josefadamcik/config.h b/keyboards/rominronin/katana60/rev1/keymaps/josefadamcik/config.h similarity index 100% rename from keyboards/katana60/keymaps/josefadamcik/config.h rename to keyboards/rominronin/katana60/rev1/keymaps/josefadamcik/config.h diff --git a/keyboards/katana60/keymaps/josefadamcik/keymap.c b/keyboards/rominronin/katana60/rev1/keymaps/josefadamcik/keymap.c similarity index 100% rename from keyboards/katana60/keymaps/josefadamcik/keymap.c rename to keyboards/rominronin/katana60/rev1/keymaps/josefadamcik/keymap.c diff --git a/keyboards/katana60/keymaps/josefadamcik/readme.md b/keyboards/rominronin/katana60/rev1/keymaps/josefadamcik/readme.md similarity index 100% rename from keyboards/katana60/keymaps/josefadamcik/readme.md rename to keyboards/rominronin/katana60/rev1/keymaps/josefadamcik/readme.md diff --git a/keyboards/katana60/keymaps/msiu/config.h b/keyboards/rominronin/katana60/rev1/keymaps/msiu/config.h similarity index 100% rename from keyboards/katana60/keymaps/msiu/config.h rename to keyboards/rominronin/katana60/rev1/keymaps/msiu/config.h diff --git a/keyboards/katana60/keymaps/msiu/keymap.c b/keyboards/rominronin/katana60/rev1/keymaps/msiu/keymap.c similarity index 100% rename from keyboards/katana60/keymaps/msiu/keymap.c rename to keyboards/rominronin/katana60/rev1/keymaps/msiu/keymap.c diff --git a/keyboards/katana60/keymaps/msiu/readme.md b/keyboards/rominronin/katana60/rev1/keymaps/msiu/readme.md similarity index 100% rename from keyboards/katana60/keymaps/msiu/readme.md rename to keyboards/rominronin/katana60/rev1/keymaps/msiu/readme.md diff --git a/keyboards/katana60/keymaps/rominronin/config.h b/keyboards/rominronin/katana60/rev1/keymaps/rominronin/config.h similarity index 100% rename from keyboards/katana60/keymaps/rominronin/config.h rename to keyboards/rominronin/katana60/rev1/keymaps/rominronin/config.h diff --git a/keyboards/katana60/keymaps/rominronin/keymap.c b/keyboards/rominronin/katana60/rev1/keymaps/rominronin/keymap.c similarity index 99% rename from keyboards/katana60/keymaps/rominronin/keymap.c rename to keyboards/rominronin/katana60/rev1/keymaps/rominronin/keymap.c index 754b552b24e0..5666dba9d569 100644 --- a/keyboards/katana60/keymaps/rominronin/keymap.c +++ b/keyboards/rominronin/katana60/rev1/keymaps/rominronin/keymap.c @@ -34,7 +34,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT( /* Base */ - KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, DF(1), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_PLUS, + KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, DF(1), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_B, KC_LBRC, KC_RBRC, KC_J, KC_L, KC_U, KC_Y, KC_QUOT, KC_BSPC, MO(3), KC_A, KC_R, KC_S, KC_T, KC_G, KC_HOME, KC_PGUP, KC_M, KC_N, KC_E, KC_I, KC_O, KC_ENT, KC_LSFT, KC_Z, KC_X, KC_C, KC_D, KC_V, KC_END, KC_DEL, KC_PGDN, KC_K, KC_H, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, @@ -64,6 +64,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; + void matrix_init_user(void) { } diff --git a/keyboards/katana60/keymaps/rominronin/readme.md b/keyboards/rominronin/katana60/rev1/keymaps/rominronin/readme.md similarity index 100% rename from keyboards/katana60/keymaps/rominronin/readme.md rename to keyboards/rominronin/katana60/rev1/keymaps/rominronin/readme.md diff --git a/keyboards/rominronin/katana60/rev1/readme.md b/keyboards/rominronin/katana60/rev1/readme.md new file mode 100644 index 000000000000..d41548b18d71 --- /dev/null +++ b/keyboards/rominronin/katana60/rev1/readme.md @@ -0,0 +1,17 @@ +# Katana60 rev1 + +![Katana60 rev1](https://i.imgur.com/xVkODOul.jpg) + +A 60% keyboard with a symmetrical staggered layout, sold by CandyKeys.com. + +Keyboard Maintainer: [Baris Tosun](https://github.com/rominronin) +Hardware Supported: Katana60 PCB rev1 +Hardware Availability: the rev1 is no longer available, the rev2 can be found at [candykeys.com](https://candykeys.com/product/katana60-pcb-V2) + +Make example for this keyboard (after setting up your build environment): + + make rominronin/katana60/rev1:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +There is also ongoing discussion for the extend layer, at the [Colemak Forum](https://forum.colemak.com/topic/2327-developing-an-extend-layer-for-the-katana60/) diff --git a/keyboards/rominronin/katana60/rev1/rev1.c b/keyboards/rominronin/katana60/rev1/rev1.c new file mode 100644 index 000000000000..e57ae2bbcbab --- /dev/null +++ b/keyboards/rominronin/katana60/rev1/rev1.c @@ -0,0 +1,16 @@ +/* Copyright 2017 Baris Tosun + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "rev1.h" diff --git a/keyboards/katana60/katana60.h b/keyboards/rominronin/katana60/rev1/rev1.h similarity index 97% rename from keyboards/katana60/katana60.h rename to keyboards/rominronin/katana60/rev1/rev1.h index 904ba56210a3..52926cc35e00 100644 --- a/keyboards/katana60/katana60.h +++ b/keyboards/rominronin/katana60/rev1/rev1.h @@ -13,8 +13,7 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#ifndef KATANA60_H -#define KATANA60_H +#pragma once #include "quantum.h" @@ -36,5 +35,3 @@ { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO }, \ { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e }, \ } - -#endif diff --git a/keyboards/rominronin/katana60/rev1/rules.mk b/keyboards/rominronin/katana60/rev1/rules.mk new file mode 100644 index 000000000000..7b69908b1ba9 --- /dev/null +++ b/keyboards/rominronin/katana60/rev1/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/rominronin/katana60/rev2/config.h b/keyboards/rominronin/katana60/rev2/config.h new file mode 100644 index 000000000000..7eff68a7f492 --- /dev/null +++ b/keyboards/rominronin/katana60/rev2/config.h @@ -0,0 +1,105 @@ +/* +Copyright 2019 rominronin + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x7272 // "rr" - rominronin +#define PRODUCT_ID 0xF03B +#define DEVICE_VER 0x0001 +#define MANUFACTURER RominRonin CandyKeys +#define PRODUCT Katana60 rev2 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B0, E6, D5, B4, B5 } +#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, C6, B6, D6, D4, D3, D2, D1, D0 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +#define TAPPING_TERM 200 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION diff --git a/keyboards/rominronin/katana60/rev2/info.json b/keyboards/rominronin/katana60/rev2/info.json new file mode 100644 index 000000000000..bc31ae64910b --- /dev/null +++ b/keyboards/rominronin/katana60/rev2/info.json @@ -0,0 +1,579 @@ +{ + "keyboard_name": "Katana60 rev2", + "url": "https://candykeys.com/product/katana60-pcb-V2", + "maintainer": "rominronin", + "width": 15, + "height": 5, + "layouts": { + "LAYOUT_7u_a": { + "layout": [ + {"label":"k00","x":0,"y":0}, + {"label":"k01","x":1,"y":0}, + {"label":"k02","x":2,"y":0}, + {"label":"k03","x":3,"y":0}, + {"label":"k04","x":4,"y":0}, + {"label":"k05","x":5,"y":0}, + {"label":"k06","x":6,"y":0}, + {"label":"k07","x":7,"y":0}, + {"label":"k08","x":8,"y":0}, + {"label":"k09","x":9,"y":0}, + {"label":"k0a","x":10,"y":0}, + {"label":"k0b","x":11,"y":0}, + {"label":"k0c","x":12,"y":0}, + {"label":"k0d","x":13,"y":0}, + {"label":"k0e","x":14,"y":0}, + {"label":"k10","x":0,"y":1,"w":1.5}, + {"label":"k11","x":1.5,"y":1}, + {"label":"k12","x":2.5,"y":1}, + {"label":"k13","x":3.5,"y":1}, + {"label":"k14","x":4.5,"y":1}, + {"label":"k15","x":5.5,"y":1}, + {"label":"k16","x":6.5,"y":1}, + {"label":"k18","x":7.5,"y":1}, + {"label":"k19","x":8.5,"y":1}, + {"label":"k1a","x":9.5,"y":1}, + {"label":"k1b","x":10.5,"y":1}, + {"label":"k1c","x":11.5,"y":1}, + {"label":"k1d","x":12.5,"y":1}, + {"label":"k1e","x":13.5,"y":1,"w":1.5}, + {"label":"k20","x":0,"y":2,"w":1.25}, + {"label":"k21","x":1.25,"y":2}, + {"label":"k22","x":2.25,"y":2}, + {"label":"k23","x":3.25,"y":2}, + {"label":"k24","x":4.25,"y":2}, + {"label":"k25","x":5.25,"y":2}, + {"label":"k26","x":6.25,"y":2}, + {"label":"k28","x":7.75,"y":2}, + {"label":"k29","x":8.75,"y":2}, + {"label":"k2a","x":9.75,"y":2}, + {"label":"k2b","x":10.75,"y":2}, + {"label":"k2c","x":11.75,"y":2}, + {"label":"k2d","x":12.75,"y":2}, + {"label":"k2e","x":13.75,"y":2,"w":1.25}, + {"label":"k30","x":0,"y":3}, + {"label":"k31","x":1,"y":3}, + {"label":"k32","x":2,"y":3}, + {"label":"k33","x":3,"y":3}, + {"label":"k34","x":4,"y":3}, + {"label":"k35","x":5,"y":3}, + {"label":"k36","x":6,"y":3}, + {"label":"k37","x":7,"y":3}, + {"label":"k38","x":8,"y":3}, + {"label":"k39","x":9,"y":3}, + {"label":"k3a","x":10,"y":3}, + {"label":"k3b","x":11,"y":3}, + {"label":"k3c","x":12,"y":3}, + {"label":"k3d","x":13,"y":3}, + {"label":"k3e","x":14,"y":3}, + {"label":"k41","x":0,"y":4,"w":1.5}, + {"label":"k42","x":1.5,"y":4}, + {"label":"k43","x":2.5,"y":4,"w":1.5}, + {"label":"k47","x":4,"y":4,"w":7}, + {"label":"k4b","x":11,"y":4}, + {"label":"k4c","x":12,"y":4}, + {"label":"k4d","x":13,"y":4}, + {"label":"k4e","x":14,"y":4} + ] + }, + "LAYOUT_7u_b": { + "layout": [ + {"label":"k00","x":0,"y":0}, + {"label":"k01","x":1,"y":0}, + {"label":"k02","x":2,"y":0}, + {"label":"k03","x":3,"y":0}, + {"label":"k04","x":4,"y":0}, + {"label":"k05","x":5,"y":0}, + {"label":"k06","x":6,"y":0}, + {"label":"k07","x":7,"y":0}, + {"label":"k08","x":8,"y":0}, + {"label":"k09","x":9,"y":0}, + {"label":"k0a","x":10,"y":0}, + {"label":"k0b","x":11,"y":0}, + {"label":"k0c","x":12,"y":0}, + {"label":"k0d","x":13,"y":0}, + {"label":"k0e","x":14,"y":0}, + {"label":"k10","x":0,"y":1,"w":1.5}, + {"label":"k11","x":1.5,"y":1}, + {"label":"k12","x":2.5,"y":1}, + {"label":"k13","x":3.5,"y":1}, + {"label":"k14","x":4.5,"y":1}, + {"label":"k15","x":5.5,"y":1}, + {"label":"k16","x":6.5,"y":1}, + {"label":"k18","x":7.5,"y":1}, + {"label":"k19","x":8.5,"y":1}, + {"label":"k1a","x":9.5,"y":1}, + {"label":"k1b","x":10.5,"y":1}, + {"label":"k1c","x":11.5,"y":1}, + {"label":"k1d","x":12.5,"y":1}, + {"label":"k1e","x":13.5,"y":1,"w":1.5}, + {"label":"k20","x":0,"y":2,"w":1.25}, + {"label":"k21","x":1.25,"y":2}, + {"label":"k22","x":2.25,"y":2}, + {"label":"k23","x":3.25,"y":2}, + {"label":"k24","x":4.25,"y":2}, + {"label":"k25","x":5.25,"y":2}, + {"label":"k26","x":6.25,"y":2}, + {"label":"k28","x":7.75,"y":2}, + {"label":"k29","x":8.75,"y":2}, + {"label":"k2a","x":9.75,"y":2}, + {"label":"k2b","x":10.75,"y":2}, + {"label":"k2c","x":11.75,"y":2}, + {"label":"k2d","x":12.75,"y":2}, + {"label":"k2e","x":13.75,"y":2,"w":1.25}, + {"label":"k30","x":0,"y":3}, + {"label":"k31","x":1,"y":3}, + {"label":"k32","x":2,"y":3}, + {"label":"k33","x":3,"y":3}, + {"label":"k34","x":4,"y":3}, + {"label":"k35","x":5,"y":3}, + {"label":"k36","x":6,"y":3}, + {"label":"k37","x":7,"y":3}, + {"label":"k38","x":8,"y":3}, + {"label":"k39","x":9,"y":3}, + {"label":"k3a","x":10,"y":3}, + {"label":"k3b","x":11,"y":3}, + {"label":"k3c","x":12,"y":3}, + {"label":"k3d","x":13,"y":3}, + {"label":"k3e","x":14,"y":3}, + {"label":"k41","x":0,"y":4,"w":1.5}, + {"label":"k42","x":1.5,"y":4}, + {"label":"k43","x":2.5,"y":4,"w":1.5}, + {"label":"k47","x":4,"y":4,"w":7}, + {"label":"k17","x":11,"y":4,"w":1.5}, + {"label":"k27","x":12.5,"y":4}, + {"label":"k48","x":13.5,"y":4,"w":1.5} + ] + }, + "LAYOUT_1_a": { + "layout": [ + {"label":"k00","x":0,"y":0}, + {"label":"k01","x":1,"y":0}, + {"label":"k02","x":2,"y":0}, + {"label":"k03","x":3,"y":0}, + {"label":"k04","x":4,"y":0}, + {"label":"k05","x":5,"y":0}, + {"label":"k06","x":6,"y":0}, + {"label":"k07","x":7,"y":0}, + {"label":"k08","x":8,"y":0}, + {"label":"k09","x":9,"y":0}, + {"label":"k0a","x":10,"y":0}, + {"label":"k0b","x":11,"y":0}, + {"label":"k0c","x":12,"y":0}, + {"label":"k0d","x":13,"y":0}, + {"label":"k0e","x":14,"y":0}, + {"label":"k10","x":0,"y":1,"w":1.5}, + {"label":"k11","x":1.5,"y":1}, + {"label":"k12","x":2.5,"y":1}, + {"label":"k13","x":3.5,"y":1}, + {"label":"k14","x":4.5,"y":1}, + {"label":"k15","x":5.5,"y":1}, + {"label":"k16","x":6.5,"y":1}, + {"label":"k18","x":7.5,"y":1}, + {"label":"k19","x":8.5,"y":1}, + {"label":"k1a","x":9.5,"y":1}, + {"label":"k1b","x":10.5,"y":1}, + {"label":"k1c","x":11.5,"y":1}, + {"label":"k1d","x":12.5,"y":1}, + {"label":"k1e","x":13.5,"y":1,"w":1.5}, + {"label":"k20","x":0,"y":2,"w":1.25}, + {"label":"k21","x":1.25,"y":2}, + {"label":"k22","x":2.25,"y":2}, + {"label":"k23","x":3.25,"y":2}, + {"label":"k24","x":4.25,"y":2}, + {"label":"k25","x":5.25,"y":2}, + {"label":"k26","x":6.25,"y":2}, + {"label":"k28","x":7.75,"y":2}, + {"label":"k29","x":8.75,"y":2}, + {"label":"k2a","x":9.75,"y":2}, + {"label":"k2b","x":10.75,"y":2}, + {"label":"k2c","x":11.75,"y":2}, + {"label":"k2d","x":12.75,"y":2}, + {"label":"k2e","x":13.75,"y":2,"w":1.25}, + {"label":"k30","x":0,"y":3}, + {"label":"k31","x":1,"y":3}, + {"label":"k32","x":2,"y":3}, + {"label":"k33","x":3,"y":3}, + {"label":"k34","x":4,"y":3}, + {"label":"k35","x":5,"y":3}, + {"label":"k36","x":6,"y":3}, + {"label":"k37","x":7,"y":3}, + {"label":"k38","x":8,"y":3}, + {"label":"k39","x":9,"y":3}, + {"label":"k3a","x":10,"y":3}, + {"label":"k3b","x":11,"y":3}, + {"label":"k3c","x":12,"y":3}, + {"label":"k3d","x":13,"y":3}, + {"label":"k3e","x":14,"y":3}, + {"label":"k40","x":0,"y":4}, + {"label":"k41","x":1,"y":4,"w":1.25}, + {"label":"k42","x":2.25,"y":4,"w":1.25}, + {"label":"k43","x":3.5,"y":4,"w":1.25}, + {"label":"k44","x":4.75,"y":4,"w":2.25}, + {"label":"k47","x":7,"y":4}, + {"label":"k49","x":8,"y":4,"w":2}, + {"label":"k4a","x":10,"y":4}, + {"label":"k4b","x":11,"y":4}, + {"label":"k4c","x":12,"y":4}, + {"label":"k4d","x":13,"y":4}, + {"label":"k4e","x":14,"y":4} + ] + }, + "LAYOUT_1_b": { + "layout": [ + {"label":"k00","x":0,"y":0}, + {"label":"k01","x":1,"y":0}, + {"label":"k02","x":2,"y":0}, + {"label":"k03","x":3,"y":0}, + {"label":"k04","x":4,"y":0}, + {"label":"k05","x":5,"y":0}, + {"label":"k06","x":6,"y":0}, + {"label":"k07","x":7,"y":0}, + {"label":"k08","x":8,"y":0}, + {"label":"k09","x":9,"y":0}, + {"label":"k0a","x":10,"y":0}, + {"label":"k0b","x":11,"y":0}, + {"label":"k0c","x":12,"y":0}, + {"label":"k0d","x":13,"y":0}, + {"label":"k0e","x":14,"y":0}, + {"label":"k10","x":0,"y":1,"w":1.5}, + {"label":"k11","x":1.5,"y":1}, + {"label":"k12","x":2.5,"y":1}, + {"label":"k13","x":3.5,"y":1}, + {"label":"k14","x":4.5,"y":1}, + {"label":"k15","x":5.5,"y":1}, + {"label":"k16","x":6.5,"y":1}, + {"label":"k18","x":7.5,"y":1}, + {"label":"k19","x":8.5,"y":1}, + {"label":"k1a","x":9.5,"y":1}, + {"label":"k1b","x":10.5,"y":1}, + {"label":"k1c","x":11.5,"y":1}, + {"label":"k1d","x":12.5,"y":1}, + {"label":"k1e","x":13.5,"y":1,"w":1.5}, + {"label":"k20","x":0,"y":2,"w":1.25}, + {"label":"k21","x":1.25,"y":2}, + {"label":"k22","x":2.25,"y":2}, + {"label":"k23","x":3.25,"y":2}, + {"label":"k24","x":4.25,"y":2}, + {"label":"k25","x":5.25,"y":2}, + {"label":"k26","x":6.25,"y":2}, + {"label":"k28","x":7.75,"y":2}, + {"label":"k29","x":8.75,"y":2}, + {"label":"k2a","x":9.75,"y":2}, + {"label":"k2b","x":10.75,"y":2}, + {"label":"k2c","x":11.75,"y":2}, + {"label":"k2d","x":12.75,"y":2}, + {"label":"k2e","x":13.75,"y":2,"w":1.25}, + {"label":"k30","x":0,"y":3}, + {"label":"k31","x":1,"y":3}, + {"label":"k32","x":2,"y":3}, + {"label":"k33","x":3,"y":3}, + {"label":"k34","x":4,"y":3}, + {"label":"k35","x":5,"y":3}, + {"label":"k36","x":6,"y":3}, + {"label":"k37","x":7,"y":3}, + {"label":"k38","x":8,"y":3}, + {"label":"k39","x":9,"y":3}, + {"label":"k3a","x":10,"y":3}, + {"label":"k3b","x":11,"y":3}, + {"label":"k3c","x":12,"y":3}, + {"label":"k3d","x":13,"y":3}, + {"label":"k3e","x":14,"y":3}, + {"label":"k40","x":0,"y":4}, + {"label":"k41","x":1,"y":4,"w":1.25}, + {"label":"k42","x":2.25,"y":4,"w":1.25}, + {"label":"k43","x":3.5,"y":4,"w":1.25}, + {"label":"k44","x":4.75,"y":4,"w":2.25}, + {"label":"k47","x":7,"y":4}, + {"label":"k49","x":8,"y":4,"w":2.75}, + {"label":"k17","x":10.75,"y":4,"w":2}, + {"label":"k48","x":12.75,"y":4,"w":2.25} + ] + }, + "LAYOUT_1_c": { + "layout": [ + {"label":"k00","x":0,"y":0}, + {"label":"k01","x":1,"y":0}, + {"label":"k02","x":2,"y":0}, + {"label":"k03","x":3,"y":0}, + {"label":"k04","x":4,"y":0}, + {"label":"k05","x":5,"y":0}, + {"label":"k06","x":6,"y":0}, + {"label":"k07","x":7,"y":0}, + {"label":"k08","x":8,"y":0}, + {"label":"k09","x":9,"y":0}, + {"label":"k0a","x":10,"y":0}, + {"label":"k0b","x":11,"y":0}, + {"label":"k0c","x":12,"y":0}, + {"label":"k0d","x":13,"y":0}, + {"label":"k0e","x":14,"y":0}, + {"label":"k10","x":0,"y":1,"w":1.5}, + {"label":"k11","x":1.5,"y":1}, + {"label":"k12","x":2.5,"y":1}, + {"label":"k13","x":3.5,"y":1}, + {"label":"k14","x":4.5,"y":1}, + {"label":"k15","x":5.5,"y":1}, + {"label":"k16","x":6.5,"y":1}, + {"label":"k18","x":7.5,"y":1}, + {"label":"k19","x":8.5,"y":1}, + {"label":"k1a","x":9.5,"y":1}, + {"label":"k1b","x":10.5,"y":1}, + {"label":"k1c","x":11.5,"y":1}, + {"label":"k1d","x":12.5,"y":1}, + {"label":"k1e","x":13.5,"y":1,"w":1.5}, + {"label":"k20","x":0,"y":2,"w":1.25}, + {"label":"k21","x":1.25,"y":2}, + {"label":"k22","x":2.25,"y":2}, + {"label":"k23","x":3.25,"y":2}, + {"label":"k24","x":4.25,"y":2}, + {"label":"k25","x":5.25,"y":2}, + {"label":"k26","x":6.25,"y":2}, + {"label":"k28","x":7.75,"y":2}, + {"label":"k29","x":8.75,"y":2}, + {"label":"k2a","x":9.75,"y":2}, + {"label":"k2b","x":10.75,"y":2}, + {"label":"k2c","x":11.75,"y":2}, + {"label":"k2d","x":12.75,"y":2}, + {"label":"k2e","x":13.75,"y":2,"w":1.25}, + {"label":"k30","x":0,"y":3}, + {"label":"k31","x":1,"y":3}, + {"label":"k32","x":2,"y":3}, + {"label":"k33","x":3,"y":3}, + {"label":"k34","x":4,"y":3}, + {"label":"k35","x":5,"y":3}, + {"label":"k36","x":6,"y":3}, + {"label":"k37","x":7,"y":3}, + {"label":"k38","x":8,"y":3}, + {"label":"k39","x":9,"y":3}, + {"label":"k3a","x":10,"y":3}, + {"label":"k3b","x":11,"y":3}, + {"label":"k3c","x":12,"y":3}, + {"label":"k3d","x":13,"y":3}, + {"label":"k3e","x":14,"y":3}, + {"label":"k40","x":0,"y":4}, + {"label":"k41","x":1,"y":4,"w":1.25}, + {"label":"k42","x":2.25,"y":4,"w":1.25}, + {"label":"k43","x":3.5,"y":4,"w":1.25}, + {"label":"k44","x":4.75,"y":4,"w":2.25}, + {"label":"k47","x":7,"y":4}, + {"label":"k49","x":8,"y":4,"w":2}, + {"label":"k45","x":10,"y":4,"w":1.5}, + {"label":"k27","x":11.5,"y":4,"w":1.25}, + {"label":"k48","x":12.75,"y":4,"w":2.25} + ] + }, + "LAYOUT_2_a": { + "layout": [ + {"label":"k00","x":0,"y":0}, + {"label":"k01","x":1,"y":0}, + {"label":"k02","x":2,"y":0}, + {"label":"k03","x":3,"y":0}, + {"label":"k04","x":4,"y":0}, + {"label":"k05","x":5,"y":0}, + {"label":"k06","x":6,"y":0}, + {"label":"k07","x":7,"y":0}, + {"label":"k08","x":8,"y":0}, + {"label":"k09","x":9,"y":0}, + {"label":"k0a","x":10,"y":0}, + {"label":"k0b","x":11,"y":0}, + {"label":"k0c","x":12,"y":0}, + {"label":"k0d","x":13,"y":0}, + {"label":"k0e","x":14,"y":0}, + {"label":"k10","x":0,"y":1,"w":1.5}, + {"label":"k11","x":1.5,"y":1}, + {"label":"k12","x":2.5,"y":1}, + {"label":"k13","x":3.5,"y":1}, + {"label":"k14","x":4.5,"y":1}, + {"label":"k15","x":5.5,"y":1}, + {"label":"k16","x":6.5,"y":1}, + {"label":"k18","x":7.5,"y":1}, + {"label":"k19","x":8.5,"y":1}, + {"label":"k1a","x":9.5,"y":1}, + {"label":"k1b","x":10.5,"y":1}, + {"label":"k1c","x":11.5,"y":1}, + {"label":"k1d","x":12.5,"y":1}, + {"label":"k1e","x":13.5,"y":1,"w":1.5}, + {"label":"k20","x":0,"y":2,"w":1.25}, + {"label":"k21","x":1.25,"y":2}, + {"label":"k22","x":2.25,"y":2}, + {"label":"k23","x":3.25,"y":2}, + {"label":"k24","x":4.25,"y":2}, + {"label":"k25","x":5.25,"y":2}, + {"label":"k26","x":6.25,"y":2}, + {"label":"k28","x":7.75,"y":2}, + {"label":"k29","x":8.75,"y":2}, + {"label":"k2a","x":9.75,"y":2}, + {"label":"k2b","x":10.75,"y":2}, + {"label":"k2c","x":11.75,"y":2}, + {"label":"k2d","x":12.75,"y":2}, + {"label":"k2e","x":13.75,"y":2,"w":1.25}, + {"label":"k30","x":0,"y":3}, + {"label":"k31","x":1,"y":3}, + {"label":"k32","x":2,"y":3}, + {"label":"k33","x":3,"y":3}, + {"label":"k34","x":4,"y":3}, + {"label":"k35","x":5,"y":3}, + {"label":"k36","x":6,"y":3}, + {"label":"k37","x":7,"y":3}, + {"label":"k38","x":8,"y":3}, + {"label":"k39","x":9,"y":3}, + {"label":"k3a","x":10,"y":3}, + {"label":"k3b","x":11,"y":3}, + {"label":"k3c","x":12,"y":3}, + {"label":"k3d","x":13,"y":3}, + {"label":"k3e","x":14,"y":3}, + {"label":"k41","x":0,"y":4,"w":1.5}, + {"label":"k42","x":1.5,"y":4,"w":1.25}, + {"label":"k43","x":2.75,"y":4,"w":1.5}, + {"label":"k44","x":4.25,"y":4,"w":2.75}, + {"label":"k47","x":7,"y":4}, + {"label":"k49","x":8,"y":4,"w":2}, + {"label":"k4a","x":10,"y":4}, + {"label":"k4b","x":11,"y":4}, + {"label":"k4c","x":12,"y":4}, + {"label":"k4d","x":13,"y":4}, + {"label":"k4e","x":14,"y":4} + ] + }, + "LAYOUT_2_b": { + "layout": [ + {"label":"k00","x":0,"y":0}, + {"label":"k01","x":1,"y":0}, + {"label":"k02","x":2,"y":0}, + {"label":"k03","x":3,"y":0}, + {"label":"k04","x":4,"y":0}, + {"label":"k05","x":5,"y":0}, + {"label":"k06","x":6,"y":0}, + {"label":"k07","x":7,"y":0}, + {"label":"k08","x":8,"y":0}, + {"label":"k09","x":9,"y":0}, + {"label":"k0a","x":10,"y":0}, + {"label":"k0b","x":11,"y":0}, + {"label":"k0c","x":12,"y":0}, + {"label":"k0d","x":13,"y":0}, + {"label":"k0e","x":14,"y":0}, + {"label":"k10","x":0,"y":1,"w":1.5}, + {"label":"k11","x":1.5,"y":1}, + {"label":"k12","x":2.5,"y":1}, + {"label":"k13","x":3.5,"y":1}, + {"label":"k14","x":4.5,"y":1}, + {"label":"k15","x":5.5,"y":1}, + {"label":"k16","x":6.5,"y":1}, + {"label":"k18","x":7.5,"y":1}, + {"label":"k19","x":8.5,"y":1}, + {"label":"k1a","x":9.5,"y":1}, + {"label":"k1b","x":10.5,"y":1}, + {"label":"k1c","x":11.5,"y":1}, + {"label":"k1d","x":12.5,"y":1}, + {"label":"k1e","x":13.5,"y":1,"w":1.5}, + {"label":"k20","x":0,"y":2,"w":1.25}, + {"label":"k21","x":1.25,"y":2}, + {"label":"k22","x":2.25,"y":2}, + {"label":"k23","x":3.25,"y":2}, + {"label":"k24","x":4.25,"y":2}, + {"label":"k25","x":5.25,"y":2}, + {"label":"k26","x":6.25,"y":2}, + {"label":"k28","x":7.75,"y":2}, + {"label":"k29","x":8.75,"y":2}, + {"label":"k2a","x":9.75,"y":2}, + {"label":"k2b","x":10.75,"y":2}, + {"label":"k2c","x":11.75,"y":2}, + {"label":"k2d","x":12.75,"y":2}, + {"label":"k2e","x":13.75,"y":2,"w":1.25}, + {"label":"k30","x":0,"y":3}, + {"label":"k31","x":1,"y":3}, + {"label":"k32","x":2,"y":3}, + {"label":"k33","x":3,"y":3}, + {"label":"k34","x":4,"y":3}, + {"label":"k35","x":5,"y":3}, + {"label":"k36","x":6,"y":3}, + {"label":"k37","x":7,"y":3}, + {"label":"k38","x":8,"y":3}, + {"label":"k39","x":9,"y":3}, + {"label":"k3a","x":10,"y":3}, + {"label":"k3b","x":11,"y":3}, + {"label":"k3c","x":12,"y":3}, + {"label":"k3d","x":13,"y":3}, + {"label":"k3e","x":14,"y":3}, + {"label":"k41","x":0,"y":4,"w":1.5}, + {"label":"k42","x":1.5,"y":4,"w":1.25}, + {"label":"k43","x":2.75,"y":4,"w":1.5}, + {"label":"k44","x":4.25,"y":4,"w":2.75}, + {"label":"k47","x":7,"y":4}, + {"label":"k49","x":8,"y":4,"w":2.75}, + {"label":"k17","x":10.75,"y":4,"w":2}, + {"label":"k48","x":12.75,"y":4,"w":2.25} + ] + }, + "LAYOUT_2_c": { + "layout": [ + {"label":"k00","x":0,"y":0}, + {"label":"k01","x":1,"y":0}, + {"label":"k02","x":2,"y":0}, + {"label":"k03","x":3,"y":0}, + {"label":"k04","x":4,"y":0}, + {"label":"k05","x":5,"y":0}, + {"label":"k06","x":6,"y":0}, + {"label":"k07","x":7,"y":0}, + {"label":"k08","x":8,"y":0}, + {"label":"k09","x":9,"y":0}, + {"label":"k0a","x":10,"y":0}, + {"label":"k0b","x":11,"y":0}, + {"label":"k0c","x":12,"y":0}, + {"label":"k0d","x":13,"y":0}, + {"label":"k0e","x":14,"y":0}, + {"label":"k10","x":0,"y":1,"w":1.5}, + {"label":"k11","x":1.5,"y":1}, + {"label":"k12","x":2.5,"y":1}, + {"label":"k13","x":3.5,"y":1}, + {"label":"k14","x":4.5,"y":1}, + {"label":"k15","x":5.5,"y":1}, + {"label":"k16","x":6.5,"y":1}, + {"label":"k18","x":7.5,"y":1}, + {"label":"k19","x":8.5,"y":1}, + {"label":"k1a","x":9.5,"y":1}, + {"label":"k1b","x":10.5,"y":1}, + {"label":"k1c","x":11.5,"y":1}, + {"label":"k1d","x":12.5,"y":1}, + {"label":"k1e","x":13.5,"y":1,"w":1.5}, + {"label":"k20","x":0,"y":2,"w":1.25}, + {"label":"k21","x":1.25,"y":2}, + {"label":"k22","x":2.25,"y":2}, + {"label":"k23","x":3.25,"y":2}, + {"label":"k24","x":4.25,"y":2}, + {"label":"k25","x":5.25,"y":2}, + {"label":"k26","x":6.25,"y":2}, + {"label":"k28","x":7.75,"y":2}, + {"label":"k29","x":8.75,"y":2}, + {"label":"k2a","x":9.75,"y":2}, + {"label":"k2b","x":10.75,"y":2}, + {"label":"k2c","x":11.75,"y":2}, + {"label":"k2d","x":12.75,"y":2}, + {"label":"k2e","x":13.75,"y":2,"w":1.25}, + {"label":"k30","x":0,"y":3}, + {"label":"k31","x":1,"y":3}, + {"label":"k32","x":2,"y":3}, + {"label":"k33","x":3,"y":3}, + {"label":"k34","x":4,"y":3}, + {"label":"k35","x":5,"y":3}, + {"label":"k36","x":6,"y":3}, + {"label":"k37","x":7,"y":3}, + {"label":"k38","x":8,"y":3}, + {"label":"k39","x":9,"y":3}, + {"label":"k3a","x":10,"y":3}, + {"label":"k3b","x":11,"y":3}, + {"label":"k3c","x":12,"y":3}, + {"label":"k3d","x":13,"y":3}, + {"label":"k3e","x":14,"y":3}, + {"label":"k41","x":0,"y":4,"w":1.5}, + {"label":"k42","x":1.5,"y":4,"w":1.25}, + {"label":"k43","x":2.75,"y":4,"w":1.5}, + {"label":"k44","x":4.25,"y":4,"w":2.75}, + {"label":"k47","x":7,"y":4}, + {"label":"k49","x":8,"y":4,"w":2}, + {"label":"k45","x":10,"y":4,"w":1.5}, + {"label":"k27","x":11.5,"y":4,"w":1.25}, + {"label":"k48","x":12.75,"y":4,"w":2.25} + ] + } + } +} diff --git a/keyboards/rominronin/katana60/rev2/keymaps/default/config.h b/keyboards/rominronin/katana60/rev2/keymaps/default/config.h new file mode 100644 index 000000000000..068967640261 --- /dev/null +++ b/keyboards/rominronin/katana60/rev2/keymaps/default/config.h @@ -0,0 +1,19 @@ +/* Copyright 2019 rominronin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// place overrides here diff --git a/keyboards/rominronin/katana60/rev2/keymaps/default/keymap.c b/keyboards/rominronin/katana60/rev2/keymaps/default/keymap.c new file mode 100644 index 000000000000..d9c9b6d4ed42 --- /dev/null +++ b/keyboards/rominronin/katana60/rev2/keymaps/default/keymap.c @@ -0,0 +1,71 @@ +/* Copyright 2019 rominronin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// MacOS based definitions. +#define K_SPCFN LT(SYMB, KC_SPACE) // Tap for space, hold for symbols layer +#define K_PRVWD LALT(KC_LEFT) // Previous word +#define K_NXTWD LALT(KC_RIGHT) // Next word +#define K_LSTRT LGUI(KC_LEFT) // Start of line +#define K_LEND LGUI(KC_RIGHT) // End of line +#define UNDO LGUI(KC_Z) // UNDO +#define CUT LGUI(KC_X) // CUT +#define COPY LGUI(KC_C) // COPY +#define PASTE LGUI(KC_V) // PASTE + +enum layer_names { + BASE, + NUMB, + SYMB, + CURS, +}; + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + QMKBEST = SAFE_RANGE, + QMKURL +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [BASE] = LAYOUT_1_a(/* Base */ + KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, DF(1), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LBRC, KC_RBRC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + MO(3), KC_A, KC_S, KC_D, KC_F, KC_G, KC_HOME, KC_PGUP, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_END, KC_DEL, KC_PGDN, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + MO(2), KC_LCTL, KC_LGUI, KC_LALT, KC_BSPC, KC_ENT, K_SPCFN, KC_RGUI, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT + ), + [NUMB] = LAYOUT_1_a( + _______, _______, _______, _______, _______, _______, _______, DF(0), _______, _______, KC_PEQL, KC_PSLS, KC_PAST, _______, _______, + _______, _______, _______, KC_MS_U, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, KC_PMNS, _______, + _______, KC_BTN2, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_PPLS, _______, + _______, _______, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, KC_PENT, _______, + _______, _______, _______, _______, _______, KC_P0, _______, _______, KC_PDOT, KC_PENT, _______, _______ + ), + [SYMB] = LAYOUT_1_a( + RESET, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, _______, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, + _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_VOLD, KC_VOLU, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, + _______, KC_PLUS, KC_MINS, KC_EQL, KC_LCBR, KC_RCBR, KC_MPRV, KC_MPLY, KC_MNXT, KC_LBRC, KC_RBRC, KC_SCLN, KC_COLN, KC_BSLS, _______, + _______, _______, _______, _______, _______, _______, KC_DEL, _______, _______, _______, _______, _______ + ), + [CURS] = LAYOUT_1_a( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, K_PRVWD, KC_UP, K_NXTWD, _______, _______, + _______, _______, KC_LCTL, KC_LALT, KC_LSFT, _______, _______, _______, KC_BSPC, KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL, _______, + _______, UNDO, CUT, COPY, PASTE, _______, _______, _______, _______, _______, K_LSTRT, _______, K_LEND, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/rominronin/katana60/rev2/keymaps/default/readme.md b/keyboards/rominronin/katana60/rev2/keymaps/default/readme.md new file mode 100644 index 000000000000..6d0bbe8b2d15 --- /dev/null +++ b/keyboards/rominronin/katana60/rev2/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for katana60_rev2 diff --git a/keyboards/rominronin/katana60/rev2/keymaps/rominronin_7u/config.h b/keyboards/rominronin/katana60/rev2/keymaps/rominronin_7u/config.h new file mode 100644 index 000000000000..068967640261 --- /dev/null +++ b/keyboards/rominronin/katana60/rev2/keymaps/rominronin_7u/config.h @@ -0,0 +1,19 @@ +/* Copyright 2019 rominronin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// place overrides here diff --git a/keyboards/rominronin/katana60/rev2/keymaps/rominronin_7u/keymap.c b/keyboards/rominronin/katana60/rev2/keymaps/rominronin_7u/keymap.c new file mode 100644 index 000000000000..5450892123b6 --- /dev/null +++ b/keyboards/rominronin/katana60/rev2/keymaps/rominronin_7u/keymap.c @@ -0,0 +1,79 @@ +/* Copyright 2019 rominronin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// MacOS based definitions. +#define K_SPCFN LT(SYMB, KC_SPACE) // Tap for space, hold for symbols layer +#define K_PRVWD LALT(KC_LEFT) // Previous word +#define K_NXTWD LALT(KC_RIGHT) // Next word +#define K_LSTRT LGUI(KC_LEFT) // Start of line +#define K_LEND LGUI(KC_RIGHT) // End of line +#define UNDO LGUI(KC_Z) // UNDO +#define CUT LGUI(KC_X) // CUT +#define COPY LGUI(KC_C) // COPY +#define PASTE LGUI(KC_V) // PASTE + +enum layer_names { + BASE, + NUMB, + SYMB, + CURS, + BASE2, +}; + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + QMKBEST = SAFE_RANGE, + QMKURL +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [BASE] = LAYOUT_7u_a(/* Base */ + KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, DF(4), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_B, KC_LBRC, KC_RBRC, KC_J, KC_L, KC_U, KC_Y, KC_QUOT, KC_BSPC, + MO(3), KC_A, KC_R, KC_S, KC_T, KC_G, KC_HOME, KC_PGUP, KC_M, KC_N, KC_E, KC_I, KC_O, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_D, KC_V, KC_END, KC_DEL, KC_PGDN, KC_K, KC_H, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LALT, KC_LGUI, K_SPCFN, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT + ), + [NUMB] = LAYOUT_7u_a( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PEQL, KC_PSLS, KC_PAST, _______, _______, + _______, _______, _______, KC_MS_U, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, KC_PMNS, _______, + DF(0), KC_BTN2, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_PPLS, _______, + _______, _______, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, KC_PENT, _______, + _______, _______, _______, KC_P0, KC_PDOT, KC_PENT, _______, _______ + ), + [SYMB] = LAYOUT_7u_a( + RESET, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, _______, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, + _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_VOLD, KC_VOLU, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, + _______, KC_PLUS, KC_MINS, KC_EQL, KC_LCBR, KC_RCBR, KC_MPRV, KC_MPLY, KC_MNXT, KC_LBRC, KC_RBRC, KC_SCLN, KC_COLN, KC_BSLS, _______, + _______, _______, _______, KC_DEL, _______, _______, _______, _______ + ), + [CURS] = LAYOUT_7u_a( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, K_PRVWD, KC_UP, K_NXTWD, _______, _______, + _______, _______, KC_LCTL, KC_LALT, KC_LSFT, _______, _______, _______, KC_BSPC, KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL, _______, + _______, UNDO, CUT, COPY, PASTE, _______, _______, _______, _______, _______, K_LSTRT, _______, K_LEND, _______, _______, + _______, _______, _______, DF(1), _______, _______, _______, _______ + ), + [BASE2] = LAYOUT_7u_a(/* Base */ + KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, DF(0), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_B, KC_LBRC, KC_RBRC, KC_J, KC_L, KC_U, KC_Y, KC_QUOT, KC_BSPC, + KC_CAPS, KC_A, KC_R, KC_S, KC_T, KC_G, KC_HOME, KC_PGUP, KC_M, KC_N, KC_E, KC_I, KC_O, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_D, KC_V, KC_END, KC_DEL, KC_PGDN, KC_K, KC_H, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LALT, KC_LGUI, KC_SPACE, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT + ) +}; diff --git a/keyboards/rominronin/katana60/rev2/keymaps/rominronin_7u/readme.md b/keyboards/rominronin/katana60/rev2/keymaps/rominronin_7u/readme.md new file mode 100644 index 000000000000..6d0bbe8b2d15 --- /dev/null +++ b/keyboards/rominronin/katana60/rev2/keymaps/rominronin_7u/readme.md @@ -0,0 +1 @@ +# The default keymap for katana60_rev2 diff --git a/keyboards/rominronin/katana60/rev2/readme.md b/keyboards/rominronin/katana60/rev2/readme.md new file mode 100644 index 000000000000..2f2abad7096c --- /dev/null +++ b/keyboards/rominronin/katana60/rev2/readme.md @@ -0,0 +1,17 @@ +# Katana60 rev2 + +![Katana60 rev2](https://i.imgur.com/3hBsSvBl.jpg) + +A 60% keyboard with a symmetrical staggered layout, sold by CandyKeys.com. + +Keyboard Maintainer: [Baris Tosun](https://github.com/rominronin) +Hardware Supported: Katana60 PCB rev2 +Hardware Availability: [candykeys.com](https://candykeys.com/product/katana60-pcb-V2) + +Make example for this keyboard (after setting up your build environment): + + make rominronin/katana60/rev2:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +There is also ongoing discussion for the extend layer, at the [Colemak Forum](https://forum.colemak.com/topic/2327-developing-an-extend-layer-for-the-katana60/) diff --git a/keyboards/rominronin/katana60/rev2/rev2.c b/keyboards/rominronin/katana60/rev2/rev2.c new file mode 100644 index 000000000000..3336fd0dc703 --- /dev/null +++ b/keyboards/rominronin/katana60/rev2/rev2.c @@ -0,0 +1,16 @@ +/* Copyright 2019 rominronin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "rev2.h" diff --git a/keyboards/rominronin/katana60/rev2/rev2.h b/keyboards/rominronin/katana60/rev2/rev2.h new file mode 100644 index 000000000000..35a45b438a9a --- /dev/null +++ b/keyboards/rominronin/katana60/rev2/rev2.h @@ -0,0 +1,238 @@ +/* Copyright 2019 rominronin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" +#define XXX KC_NO + +/* LAYOUT_7u_a + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │0E │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ + * │10 │11 │12 │13 │14 │15 │16 │18 │19 │1A │1B │1C │1D │1E │ + * ├────┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬────┤ + * │20 │21 │22 │23 │24 │25 │26 │ │28 │29 │2A │2B │2C │2D │2E │ + * ├───┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴─┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬───┤ + * │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3D │3E │ + * ├───┴─┬─┴─┬─┴───┼───┴───┴───┴───┴───┴───┴───┼───┼───┼───┼───┤ + * │41 │42 │43 │ 47 │4B │4C │4D │4E │ + * └─────┴───┴─────┴───────────────────────────┴───┴───┴───┴───┘ + */ +#define LAYOUT_7u_a( \ + Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E, \ + Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E, \ + Q20, Q21, Q22, Q23, Q24, Q25, Q26, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E, \ + Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E, \ + Q41, Q42, Q43, Q47, Q4B, Q4C, Q4D, Q4E \ +) { \ + { Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E }, \ + { Q10, Q11, Q12, Q13, Q14, Q15, Q16, XXX, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E }, \ + { Q20, Q21, Q22, Q23, Q24, Q25, Q26, XXX, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E }, \ + { Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E }, \ + { XXX, Q41, Q42, Q43, XXX, XXX, XXX, Q47, XXX, XXX, XXX, Q4B, Q4C, Q4D, Q4E } \ +} + +/* LAYOUT_7u_b + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │0E │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ + * │10 │11 │12 │13 │14 │15 │16 │18 │19 │1A │1B │1C │1D │1E │ + * ├────┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬────┤ + * │20 │21 │22 │23 │24 │25 │26 │ │28 │29 │2A │2B │2C │2D │2E │ + * ├───┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴─┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬───┤ + * │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3D │3E │ + * ├───┴─┬─┴─┬─┴───┼───┴───┴───┴───┴───┴───┴───┼───┴─┬─┴─┬─┴───┤ + * │41 │42 │43 │ 47 │17 │27 │48 │ + * └─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘ + */ +#define LAYOUT_7u_b( \ + Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E, \ + Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E, \ + Q20, Q21, Q22, Q23, Q24, Q25, Q26, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E, \ + Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E, \ + Q41, Q42, Q43, Q47, Q17, Q27, Q48 \ +) { \ + { Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E }, \ + { Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E }, \ + { Q20, Q21, Q22, Q23, Q24, Q25, Q26, Q27, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E }, \ + { Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E }, \ + { XXX, Q41, Q42, Q43, XXX, XXX, XXX, Q47, Q48, XXX, XXX, XXX, XXX, XXX, XXX } \ +} + +/* LAYOUT_1_a + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │0E │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ + * │10 │11 │12 │13 │14 │15 │16 │18 │19 │1A │1B │1C │1D │1E │ + * ├────┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬────┤ + * │20 │21 │22 │23 │24 │25 │26 │ │28 │29 │2A │2B │2C │2D │2E │ + * ├───┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴─┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬───┤ + * │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3D │3E │ + * ├───┼───┴┬──┴─┬─┴──┬┴───┴───┼───┼───┴───┼───┼───┼───┼───┼───┤ + * │40 │41 │42 │43 │ 44 │47 │ 49 │4A │4B │4C │4D │4E │ + * └───┴────┴────┴────┴────────┴───┴───────┴───┴───┴───┴───┴───┘ + */ +#define LAYOUT_1_a( \ + Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E, \ + Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E, \ + Q20, Q21, Q22, Q23, Q24, Q25, Q26, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E, \ + Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E, \ + Q40, Q41, Q42, Q43, Q44, Q47, Q49, Q4A, Q4B, Q4C, Q4D, Q4E \ +) { \ + { Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E }, \ + { Q10, Q11, Q12, Q13, Q14, Q15, Q16, XXX, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E }, \ + { Q20, Q21, Q22, Q23, Q24, Q25, Q26, XXX, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E }, \ + { Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E }, \ + { Q40, Q41, Q42, Q43, Q44, XXX, XXX, Q47, XXX, Q49, Q4A, Q4B, Q4C, Q4D, Q4E } \ +} + +/* LAYOUT_1_b + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │0E │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ + * │10 │11 │12 │13 │14 │15 │16 │18 │19 │1A │1B │1C │1D │1E │ + * ├────┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬────┤ + * │20 │21 │22 │23 │24 │25 │26 │ │28 │29 │2A │2B │2C │2D │2E │ + * ├───┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴─┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬───┤ + * │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3D │3E │ + * ├───┼───┴┬──┴─┬─┴──┬┴───┴───┼───┼───┴───┴──┬┴───┴──┬┴───┴───┤ + * │40 │41 │42 │43 │ 44 │47 │ 49 │17 │48 │ + * └───┴────┴────┴────┴────────┴───┴──────────┴───────┴────────┘ + */ +#define LAYOUT_1_b( \ + Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E, \ + Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E, \ + Q20, Q21, Q22, Q23, Q24, Q25, Q26, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E, \ + Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E, \ + Q40, Q41, Q42, Q43, Q44, Q47, Q49, Q17, Q48 \ +) { \ + { Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E }, \ + { Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E }, \ + { Q20, Q21, Q22, Q23, Q24, Q25, Q26, XXX, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E }, \ + { Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E }, \ + { Q40, Q41, Q42, Q43, Q44, XXX, XXX, Q47, Q48, Q49, XXX, XXX, XXX, XXX, XXX } \ +} + +/* LAYOUT_1_c + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │0E │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ + * │10 │11 │12 │13 │14 │15 │16 │18 │19 │1A │1B │1C │1D │1E │ + * ├────┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬────┤ + * │20 │21 │22 │23 │24 │25 │26 │ │28 │29 │2A │2B │2C │2D │2E │ + * ├───┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴─┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬───┤ + * │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3D │3E │ + * ├───┼───┴┬──┴─┬─┴──┬┴───┴───┼───┼───┴───┼───┴─┬─┴──┬┴───┴───┤ + * │40 │41 │42 │43 │ 44 │47 │ 49 │45 │27 │48 │ + * └───┴────┴────┴────┴────────┴───┴───────┴─────┴────┴────────┘ + */ +#define LAYOUT_1_c( \ + Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E, \ + Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E, \ + Q20, Q21, Q22, Q23, Q24, Q25, Q26, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E, \ + Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E, \ + Q40, Q41, Q42, Q43, Q44, Q47, Q49, Q45, Q27, Q48 \ +) { \ + { Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E }, \ + { Q10, Q11, Q12, Q13, Q14, Q15, Q16, XXX, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E }, \ + { Q20, Q21, Q22, Q23, Q24, Q25, Q26, Q27, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E }, \ + { Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E }, \ + { Q40, Q41, Q42, Q43, Q44, Q45, XXX, Q47, Q48, Q49, XXX, XXX, XXX, XXX, XXX } \ +} + + +/* LAYOUT_2_a + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │0E │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ + * │10 │11 │12 │13 │14 │15 │16 │18 │19 │1A │1B │1C │1D │1E │ + * ├────┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬────┤ + * │20 │21 │22 │23 │24 │25 │26 │ │28 │29 │2A │2B │2C │2D │2E │ + * ├───┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴─┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬───┤ + * │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3D │3E │ + * ├───┴─┬─┴──┬┴───┴┬──┴───┴───┼───┼───┴───┼───┼───┼───┼───┼───┤ + * │41 │42 │43 │ 44 │47 │ 49 │4A │4B │4C │4D │4E │ + * └─────┴────┴─────┴──────────┴───┴───────┴───┴───┴───┴───┴───┘ + */ +#define LAYOUT_2_a( \ + Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E, \ + Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E, \ + Q20, Q21, Q22, Q23, Q24, Q25, Q26, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E, \ + Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E, \ + Q41, Q42, Q43, Q44, Q47, Q49, Q4A, Q4B, Q4C, Q4D, Q4E \ +) { \ + { Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E }, \ + { Q10, Q11, Q12, Q13, Q14, Q15, Q16, XXX, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E }, \ + { Q20, Q21, Q22, Q23, Q24, Q25, Q26, XXX, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E }, \ + { Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E }, \ + { XXX, Q41, Q42, Q43, Q44, XXX, XXX, Q47, XXX, Q49, Q4A, Q4B, Q4C, Q4D, Q4E } \ +} + + + +/* LAYOUT_2_b + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │0E │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ + * │10 │11 │12 │13 │14 │15 │16 │18 │19 │1A │1B │1C │1D │1E │ + * ├────┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬────┤ + * │20 │21 │22 │23 │24 │25 │26 │ │28 │29 │2A │2B │2C │2D │2E │ + * ├───┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴─┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬───┤ + * │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3D │3E │ + * ├───┴─┬─┴──┬┴───┴┬──┴───┴───┼───┼───┴───┴──┬┴───┴──┬┴───┴───┤ + * │41 │42 │43 │ 44 │47 │ 49 │17 │48 │ + * └─────┴────┴─────┴──────────┴───┴──────────┴───────┴────────┘ + */ +#define LAYOUT_2_b( \ + Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E, \ + Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E, \ + Q20, Q21, Q22, Q23, Q24, Q25, Q26, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E, \ + Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E, \ + Q41, Q42, Q43, Q44, Q47, Q49, Q17, Q48 \ +) { \ + { Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E }, \ + { Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E }, \ + { Q20, Q21, Q22, Q23, Q24, Q25, Q26, XXX, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E }, \ + { Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E }, \ + { XXX, Q41, Q42, Q43, Q44, XXX, XXX, Q47, Q48, Q49, XXX, XXX, XXX, XXX, XXX } \ +} + +/* LAYOUT_2_c + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │0E │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ + * │10 │11 │12 │13 │14 │15 │16 │18 │19 │1A │1B │1C │1D │1E │ + * ├────┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬────┤ + * │20 │21 │22 │23 │24 │25 │26 │ │28 │29 │2A │2B │2C │2D │2E │ + * ├───┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴─┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬───┤ + * │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3D │3E │ + * ├───┼───┴┬──┴─┬─┴──┬┴───┴───┼───┼───┴───┼───┴─┬─┴──┬┴───┴───┤ + * │40 │41 │42 │43 │ 44 │47 │ 49 │45 │27 │48 │ + * └───┴────┴────┴────┴────────┴───┴───────┴─────┴────┴────────┘ + */ +#define LAYOUT_2_c( \ + Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E, \ + Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E, \ + Q20, Q21, Q22, Q23, Q24, Q25, Q26, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E, \ + Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E, \ + Q41, Q42, Q43, Q44, Q47, Q49, Q45, Q27, Q48 \ +) { \ + { Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E }, \ + { Q10, Q11, Q12, Q13, Q14, Q15, Q16, XXX, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E }, \ + { Q20, Q21, Q22, Q23, Q24, Q25, Q26, Q27, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E }, \ + { Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E }, \ + { XXX, Q41, Q42, Q43, Q44, Q45, XXX, Q47, Q48, Q49, XXX, XXX, XXX, XXX, XXX } \ +} diff --git a/keyboards/rominronin/katana60/rev2/rules.mk b/keyboards/rominronin/katana60/rev2/rules.mk new file mode 100644 index 000000000000..000f55911ad3 --- /dev/null +++ b/keyboards/rominronin/katana60/rev2/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/soy20/config.h b/keyboards/soy20/config.h new file mode 100644 index 000000000000..ef5123e498c5 --- /dev/null +++ b/keyboards/soy20/config.h @@ -0,0 +1,60 @@ +#ifndef CONFIG_H +#define CONFIG_H + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4452 // "DR" short for DrewKeys +#define PRODUCT_ID 0x534f // "SO" short for Soy +#define DEVICE_VER 0x0001 +#define MANUFACTURER drewkeys +#define PRODUCT soy20 +#define DESCRIPTION soy20 4x5 numpad + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 4 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4 } +#define MATRIX_COL_PINS { B5, B6, B7, C7 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* number of backlight levels */ + +#ifdef BACKLIGHT_PIN +#define BACKLIGHT_LEVELS 3 +#endif + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* prevent stuck modifiers */ +#define PREVENT_STUCK_MODIFIERS + + +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 0 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#endif + +#endif diff --git a/keyboards/soy20/info.json b/keyboards/soy20/info.json new file mode 100644 index 000000000000..548bc451357b --- /dev/null +++ b/keyboards/soy20/info.json @@ -0,0 +1,34 @@ +{ + "keyboard_name": "Soy20", + "url": "", + "maintainer": "twholt", + "width": 4, + "height": 5, + "layouts": { + "LAYOUT": { + "key_count": 20, + "layout": [ + {"label":"K00 (B0,B5)", "x":0, "y":0}, + {"label":"K01 (B0,B6)", "x":1, "y":0}, + {"label":"K02 (B0,B7)", "x":2, "y":0}, + {"label":"K03 (B0,C7)", "x":3, "y":0}, + {"label":"K10 (B1,B5)", "x":0, "y":1}, + {"label":"K11 (B1,B6)", "x":1, "y":1}, + {"label":"K12 (B1,B7)", "x":2, "y":1}, + {"label":"K13 (B1,C7)", "x":3, "y":1}, + {"label":"K20 (B2,B5)", "x":0, "y":2}, + {"label":"K21 (B2,B6)", "x":1, "y":2}, + {"label":"K22 (B2,B7)", "x":2, "y":2}, + {"label":"K23 (B2,C7)", "x":3, "y":2}, + {"label":"K30 (B3,B5)", "x":0, "y":3}, + {"label":"K31 (B3,B6)", "x":1, "y":3}, + {"label":"K32 (B3,B7)", "x":2, "y":3}, + {"label":"K33 (B3,C7)", "x":3, "y":3}, + {"label":"K40 (B4,B5)", "x":0, "y":4}, + {"label":"K41 (B4,B6)", "x":1, "y":4}, + {"label":"K42 (B4,B7)", "x":2, "y":4}, + {"label":"K43 (B4,C7)", "x":3, "y":4} + ] + } + } +} diff --git a/keyboards/soy20/keymaps/Friend_Or_F0H/keymap.c b/keyboards/soy20/keymaps/Friend_Or_F0H/keymap.c new file mode 100644 index 000000000000..d5423f6534d1 --- /dev/null +++ b/keyboards/soy20/keymaps/Friend_Or_F0H/keymap.c @@ -0,0 +1,77 @@ +#include "soy20.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT( + KC_PMNS, KC_PAST, KC_PSLS, TG(1), + KC_PPLS, KC_P9, KC_P8, KC_P7, + KC_PPLS, KC_P6, KC_P5, KC_P4, + KC_PENT, KC_P3, KC_P2, KC_P1, + KC_PENT, KC_PDOT, KC_P0, KC_P0), + + [1] = LAYOUT( + KC_NLCK, KC_TRNS, KC_PSCR, KC_TRNS, + KC_TRNS, KC_PGUP, KC_UP, KC_HOME, + KC_TRNS, KC_RGHT, KC_NO, KC_LEFT, + KC_TRNS, KC_PGDN, KC_DOWN, KC_END, + RESET, KC_DEL, KC_INS, KC_INS), + + [2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [3] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +}; + +void matrix_init_user(void) { +} + +void matrix_scan_user(void) { +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + + if (usb_led & (1 << USB_LED_NUM_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_CAPS_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_COMPOSE)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_KANA)) { + + } else { + + } + +} diff --git a/keyboards/soy20/keymaps/Friend_Or_F0H/rules.mk b/keyboards/soy20/keymaps/Friend_Or_F0H/rules.mk new file mode 100644 index 000000000000..43061db1dd46 --- /dev/null +++ b/keyboards/soy20/keymaps/Friend_Or_F0H/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes \ No newline at end of file diff --git a/keyboards/soy20/keymaps/default/keymap.c b/keyboards/soy20/keymaps/default/keymap.c new file mode 100644 index 000000000000..2a0fdbcf5e12 --- /dev/null +++ b/keyboards/soy20/keymaps/default/keymap.c @@ -0,0 +1,77 @@ +#include "soy20.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT( + KC_PMNS, KC_PAST, KC_PSLS, MO(1), + KC_PPLS, KC_P9, KC_P8, KC_P7, + KC_TAB, KC_P5, KC_P6, KC_P4, + KC_PENT, KC_P3, KC_P2, KC_P1, + KC_DEL, KC_SCLN, KC_PDOT, KC_P0), + + [1] = LAYOUT( + KC_NLCK, KC_PSCR, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, RESET), + + [2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [3] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +}; + +void matrix_init_user(void) { +} + +void matrix_scan_user(void) { +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + + if (usb_led & (1 << USB_LED_NUM_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_CAPS_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_COMPOSE)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_KANA)) { + + } else { + + } + +} diff --git a/keyboards/soy20/keymaps/via/keymap.c b/keyboards/soy20/keymaps/via/keymap.c new file mode 100644 index 000000000000..2a0fdbcf5e12 --- /dev/null +++ b/keyboards/soy20/keymaps/via/keymap.c @@ -0,0 +1,77 @@ +#include "soy20.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT( + KC_PMNS, KC_PAST, KC_PSLS, MO(1), + KC_PPLS, KC_P9, KC_P8, KC_P7, + KC_TAB, KC_P5, KC_P6, KC_P4, + KC_PENT, KC_P3, KC_P2, KC_P1, + KC_DEL, KC_SCLN, KC_PDOT, KC_P0), + + [1] = LAYOUT( + KC_NLCK, KC_PSCR, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, RESET), + + [2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [3] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +}; + +void matrix_init_user(void) { +} + +void matrix_scan_user(void) { +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + + if (usb_led & (1 << USB_LED_NUM_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_CAPS_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_COMPOSE)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_KANA)) { + + } else { + + } + +} diff --git a/keyboards/soy20/keymaps/via/rules.mk b/keyboards/soy20/keymaps/via/rules.mk new file mode 100644 index 000000000000..36b7ba9cbc98 --- /dev/null +++ b/keyboards/soy20/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/soy20/readme.md b/keyboards/soy20/readme.md new file mode 100644 index 000000000000..6ce4552b2ccd --- /dev/null +++ b/keyboards/soy20/readme.md @@ -0,0 +1,13 @@ +# Soy20 + +A 4x5 keypad created by drewkeys + +Keyboard Maintainer: [Friend-Or-F0H](https://github.com/Friend-Or-F0H) +Hardware Supported: drewkeys Soy20 PCB +Hardware Availability: Limited GB + +Make example for this keyboard (after setting up your build environment): + + make soy20:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/soy20/rules.mk b/keyboards/soy20/rules.mk new file mode 100644 index 000000000000..239bc6826e1a --- /dev/null +++ b/keyboards/soy20/rules.mk @@ -0,0 +1,60 @@ +# MCU name +MCU = atmega32u2 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +AUDIO_ENABLE = no # Audio output on port C6 +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/soy20/soy20.c b/keyboards/soy20/soy20.c new file mode 100644 index 000000000000..0976d52238c2 --- /dev/null +++ b/keyboards/soy20/soy20.c @@ -0,0 +1 @@ +#include "soy20.h" diff --git a/keyboards/soy20/soy20.h b/keyboards/soy20/soy20.h new file mode 100644 index 000000000000..e39cac26c8c3 --- /dev/null +++ b/keyboards/soy20/soy20.h @@ -0,0 +1,22 @@ +#ifndef SOY20_H +#define SOY20_H + +#pragma once + +#include "quantum.h" + +#define LAYOUT( \ + K00, K01, K02, K03, \ + K10, K11, K12, K13, \ + K20, K21, K22, K23, \ + K30, K31, K32, K33, \ + K40, K41, K42, K43 \ +) { \ + { K00, K01, K02, K03 }, \ + { K10, K11, K12, K13 }, \ + { K20, K21, K22, K23 }, \ + { K30, K31, K32, K33 }, \ + { K40, K41, K42, K43 } \ +} + +#endif diff --git a/keyboards/spaceman/2_milk/keymaps/via/rules.mk b/keyboards/spaceman/2_milk/keymaps/via/rules.mk index 43061db1dd46..36b7ba9cbc98 100644 --- a/keyboards/spaceman/2_milk/keymaps/via/rules.mk +++ b/keyboards/spaceman/2_milk/keymaps/via/rules.mk @@ -1,2 +1,2 @@ VIA_ENABLE = yes -LTO_ENABLE = yes \ No newline at end of file +LTO_ENABLE = yes diff --git a/keyboards/spaceman/2_milk/rules.mk b/keyboards/spaceman/2_milk/rules.mk index 4e6c5f7039a5..b93e8d3a4858 100644 --- a/keyboards/spaceman/2_milk/rules.mk +++ b/keyboards/spaceman/2_milk/rules.mk @@ -16,7 +16,7 @@ BOOTLOADER = caterina # BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration MOUSEKEY_ENABLE = no # Mouse keys -EXTRAKEY_ENABLE = no # Audio control and System control +EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/spiderisland/split78/config.h b/keyboards/spiderisland/split78/config.h new file mode 100644 index 000000000000..a7ec160fafb9 --- /dev/null +++ b/keyboards/spiderisland/split78/config.h @@ -0,0 +1,35 @@ +/* +Copyright 2020 unrelenting.technology + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0xF4E4 +#define DEVICE_VER 0x0001 +#define MANUFACTURER SpiderIsland +#define PRODUCT Split 78-key + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 14 + +#define BACKLIGHT_PIN D4 +#define BACKLIGHT_LEVELS 3 +#define BACKLIGHT_BREATHING diff --git a/keyboards/spiderisland/split78/info.json b/keyboards/spiderisland/split78/info.json new file mode 100644 index 000000000000..7a96efe7623b --- /dev/null +++ b/keyboards/spiderisland/split78/info.json @@ -0,0 +1,94 @@ +{ + "keyboard_name": "Spider Island 78-key split", + "url": "", + "maintainer": "qmk", + "width": 16, + "height": 6.25, + "layouts": { + "LAYOUT": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6.5, "y": 0}, + {"x": 8.5, "y": 0}, + {"x": 9.5, "y": 0}, + {"x": 10.5, "y": 0}, + {"x": 12, "y": 0}, + {"x": 13, "y": 0}, + {"x": 14, "y": 0}, + {"x": 15, "y": 0}, + {"x": 0, "y": 1.25}, + {"x": 1, "y": 1.25}, + {"x": 2, "y": 1.25}, + {"x": 3, "y": 1.25}, + {"x": 4, "y": 1.25}, + {"x": 5, "y": 1.25}, + {"x": 6, "y": 1.25}, + {"x": 8, "y": 1.25}, + {"x": 9, "y": 1.25}, + {"x": 10, "y": 1.25}, + {"x": 11, "y": 1.25}, + {"x": 12, "y": 1.25}, + {"x": 13, "y": 1.25}, + {"x": 14, "y": 1.25, "w": 2}, + {"x": 0, "y": 2.25, "w": 1.5}, + {"x": 1.5, "y": 2.25}, + {"x": 2.5, "y": 2.25}, + {"x": 3.5, "y": 2.25}, + {"x": 4.5, "y": 2.25}, + {"x": 5.5, "y": 2.25}, + {"x": 7.5, "y": 2.25}, + {"x": 8.5, "y": 2.25}, + {"x": 9.5, "y": 2.25}, + {"x": 10.5, "y": 2.25}, + {"x": 11.5, "y": 2.25}, + {"x": 12.5, "y": 2.25}, + {"x": 13.5, "y": 2.25}, + {"x": 14.5, "y": 2.25, "w": 1.5}, + + {"x": 0, "y": 3.25, "w": 1.75}, + {"x": 1.75, "y": 3.25}, + {"x": 2.75, "y": 3.25}, + {"x": 3.75, "y": 3.25}, + {"x": 4.75, "y": 3.25}, + {"x": 5.75, "y": 3.25}, + {"x": 7.75, "y": 3.25}, + {"x": 8.75, "y": 3.25}, + {"x": 9.75, "y": 3.25}, + {"x": 10.75, "y": 3.25}, + {"x": 11.75, "y": 3.25}, + {"x": 12.75, "y": 3.25}, + {"x": 13.75, "y": 3.25, "w": 2.25}, + + {"x": 0, "y": 4.25, "w": 2.25}, + {"x": 2.25, "y": 4.25}, + {"x": 3.25, "y": 4.25}, + {"x": 4.25, "y": 4.25}, + {"x": 5.25, "y": 4.25}, + {"x": 6.25, "y": 4.25}, + {"x": 8.25, "y": 4.25}, + {"x": 9.25, "y": 4.25}, + {"x": 10.25, "y": 4.25}, + {"x": 11.25, "y": 4.25}, + {"x": 12.25, "y": 4.25, "w": 1.75}, + {"x": 14, "y": 4.25}, + {"x": 15, "y": 4.25}, + + {"x": 0, "y": 5.25, "w": 1.25}, + {"x": 1.25, "y": 5.25, "w": 1.25}, + {"x": 2.5, "y": 5.25, "w": 1.25}, + {"x": 3.75, "y": 5.25, "w": 1.25}, + {"x": 5, "y": 5.25, "w": 2.25}, + {"x": 8.25, "y": 5.25, "w": 2.25}, + {"x": 10.5, "y": 5.25, "w": 1.25}, + {"x": 11.75, "y": 5.25, "w": 1.25}, + {"x": 13, "y": 5.25}, + {"x": 14, "y": 5.25}, + {"x": 15, "y": 5.25} + ] + } + } +} diff --git a/keyboards/spiderisland/split78/keymaps/default/keymap.c b/keyboards/spiderisland/split78/keymaps/default/keymap.c new file mode 100644 index 000000000000..761648d9580c --- /dev/null +++ b/keyboards/spiderisland/split78/keymaps/default/keymap.c @@ -0,0 +1,41 @@ +/* Copyright 2020 unrelenting.technology + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT( + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_SCLN, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, TT(_FN), KC_SPC, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [_FN] = LAYOUT( + RESET, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, BL_DEC, BL_INC, KC_DEL, + KC_NLCK, XXXXXXX, KC_UP, XXXXXXX, XXXXXXX, XXXXXXX, KC_P7, KC_P8, KC_P9, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + BL_TOGG, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, KC_P4, KC_P5, KC_P6, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + KC_SLCK, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_P1, KC_P2, KC_P3, XXXXXXX, KC_SLSH, KC_PGUP, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_P0, KC_PDOT, KC_PENT, KC_HOME, KC_PGDN, KC_END + ) +}; diff --git a/keyboards/spiderisland/split78/matrix.c b/keyboards/spiderisland/split78/matrix.c new file mode 100644 index 000000000000..b5c7028fdf5f --- /dev/null +++ b/keyboards/spiderisland/split78/matrix.c @@ -0,0 +1,155 @@ +/* +Copyright 2017 Luiz Ribeiro + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include +#include +#include "quantum.h" +#include "i2c_master.h" +#include "split78.h" + +#define RIGHT_HALF + + +void matrix_set_row_status(uint8_t row); + + +#if defined(RIGHT_HALF) +#define I2C_TIMEOUT 10 +#define MCP23018_TWI_ADDRESS 0b0100000 +#define TW_READ 1 +#define TW_WRITE 0 +#define TWI_ADDR_WRITE ( (MCP23018_TWI_ADDRESS<<1) | TW_WRITE ) +#define TWI_ADDR_READ ( (MCP23018_TWI_ADDRESS<<1) | TW_READ ) +#define IODIRA 0x00 // i/o direction register +#define IODIRB 0x01 +#define IODIRA 0x00 // i/o direction register +#define IODIRB 0x01 +#define GPPUA 0x0C // GPIO pull-up resistor register +#define GPPUB 0x0D +#define GPIOA 0x12 // general purpose i/o port register (write modifies OLAT) +#define GPIOB 0x13 +#define OLATA 0x14 // output latch register +#define OLATB 0x15 +#define MCP_ROWS_START 8 + +static uint8_t mcp23018_init(void) { + uint8_t ret; + uint8_t data[3]; + // set pin direction + // - unused : input : 1 + // - input : input : 1 + // - driving : output : 0 + data[0] = IODIRA; + data[1] = 0b00000000; // IODIRA + data[2] = (0b11111111); // IODIRB + + ret = i2c_transmit(TWI_ADDR_WRITE, (uint8_t *)data, 3, I2C_TIMEOUT); + if (ret) goto out; // make sure we got an ACK + + // set pull-up + // - unused : on : 1 + // - input : on : 1 + // - driving : off : 0 + data[0] = GPPUA; + data[1] = 0b00000000; // IODIRA + data[2] = (0b11111111); // IODIRB + + ret = i2c_transmit(TWI_ADDR_WRITE, (uint8_t *)data, 3, I2C_TIMEOUT); + if (ret) goto out; // make sure we got an ACK + + // set logical value (doesn't matter on inputs) + // - unused : hi-Z : 1 + // - input : hi-Z : 1 + // - driving : hi-Z : 1 + data[0] = OLATA; + data[1] = 0b11111111; // IODIRA + data[2] = (0b11111111); // IODIRB + + ret = i2c_transmit(TWI_ADDR_WRITE, (uint8_t *)data, 3, I2C_TIMEOUT); + +out: + return ret; +} +#endif + +void matrix_init_custom(void) { + // Set rows as output starting high + DDRB = 0xFF; + PORTB = 0xFF; + + // Set columns as inputs with pull-up enabled + DDRA = 0x00; + PORTA = 0xFF; + + // Initialize i2c communication + i2c_init(); + +#if defined(RIGHT_HALF) + // Initialize the chip on the other half + mcp23018_init(); +#endif + +} + +bool matrix_scan_custom(matrix_row_t current_matrix[]) { + bool matrix_has_changed = false; + + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + // Store last value of row prior to reading + matrix_row_t last_row_value = current_matrix[row]; + + matrix_row_t cols = 0; + // Select the row to scan + matrix_set_row_status(row); + + matrix_io_delay(); + //Set the local row + +#if defined(RIGHT_HALF) + // Initialize to 0x7F in case I2C read fails, + // as 0x75 would be no keys pressed + uint8_t data = 0x7F; + // Receive the columns from right half + i2c_receive(TWI_ADDR_WRITE, &data, 1, I2C_TIMEOUT); +#endif + + cols |= ((~(PINA | 0x80)) & 0x7F); +#if defined(RIGHT_HALF) + cols |= (((~(data | 0x80)) & 0x7F) << 7); +#endif + + current_matrix[row] = cols; + matrix_has_changed |= (last_row_value != current_matrix[row]); + } + + return matrix_has_changed; +} + +void matrix_set_row_status(uint8_t row) { +#if defined(RIGHT_HALF) + uint8_t txdata[3]; + + //Set the remote row on port A + txdata[0] = (GPIOA); + txdata[1] = ( 0xFF & ~(1<. + */ + +#include "split78.h" diff --git a/keyboards/spiderisland/split78/split78.h b/keyboards/spiderisland/split78/split78.h new file mode 100644 index 000000000000..2f6252f0c922 --- /dev/null +++ b/keyboards/spiderisland/split78/split78.h @@ -0,0 +1,36 @@ +/* Copyright 2020 unrelenting.technology + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT( \ + l00, l01, l02, l03, l04, l05, r00, r01, r02, r03, r04, r05, r06, \ + l06, l07, l08, l09, l10, l11, l12, r07, r08, r09, r10, r11, r12, r13, \ + l13, l14, l15, l16, l17, l18, r14, r15, r16, r17, r18, r19, r20, r21, \ + l19, l20, l21, l22, l23, l24, r22, r23, r24, r25, r26, r27, r28, \ + l25, l26, l27, l28, l29, l30, r29, r30, r31, r32, r33, r34, r35, \ + l31, l32, l33, l34, l35, r36, r37, r38, r39, r40, r41 \ +) { \ + { l00, l06, l13, l19, l25, l31, KC_NO, r00, r07, r14, r22, r29, r21 }, \ + { l01, l07, l14, l20, l26, l32, KC_NO, r01, r08, r15, r23, r30, r36 }, \ + { l02, l08, l15, l21, l27, l33, KC_NO, r02, r09, r16, r24, r31, r37 }, \ + { l03, l09, l16, l22, l28, l34, KC_NO, r03, r10, r17, r25, r32, r38 }, \ + { l04, l10, l17, l23, l29, l35, KC_NO, r04, r11, r18, r27, r33, r39 }, \ + { l05, l11, l18, l24, l30, l12, KC_NO, r05, r12, r19, r26, r34, r40 }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, r06, r13, r20, r28, r35, r41 }, \ +} diff --git a/keyboards/thevankeyboards/minivan/keymaps/king/keymap.c b/keyboards/thevankeyboards/minivan/keymaps/king/keymap.c index bcfbad2e0b1f..032aaf5c730d 100644 --- a/keyboards/thevankeyboards/minivan/keymaps/king/keymap.c +++ b/keyboards/thevankeyboards/minivan/keymaps/king/keymap.c @@ -1,3 +1,19 @@ + /* Copyright 2020 King Wang Wong + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + #include QMK_KEYBOARD_H @@ -17,17 +33,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────────┐ * │ ESC │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │BKSPC │ * ├─────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────────┤ - * │ TAB │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │' │ + * │ TAB │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ENTER │ * ├──────┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬─────┤ - * │ LSHFT │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ENTER│ + * │ LSHFT │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │' │ * ├────────┬┴─────┴─┬───┴─┬───┴─────┴──┬──┴─────┴─────┴─┬───┴─┬───┴─┬───┴─────┤ - * │LCTRL │ LGUI │ LALT│SPACE(_NL) │MO(_NL) │MO SL│ │MO(RL │ + * │LCTRL │ LGUI │ LALT│SPACE(_NL) │MO(_NL) │MO_SL│ │MO(RL │ * └────────┴────────┴─────┴────────────┴────────────────┴─────┴─────┴─────────┘ */ [_ML] = LAYOUT( KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT, KC_LCTL, KC_LGUI, KC_LALT, SPC_FUN, MO(_NL), MO(_SL), XXXXXXX, MO(_RL) ), @@ -36,7 +52,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────────┐ * │ │ │HOME │ UP │END │PGUP │ │ F1 │ F2 │ F3 │ F4 │ │ * ├─────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────────┤ - * │ CAPS │ │LEFT │DOWN │RIGHT│PGDN │ │ F5 │ F6 │ F7 │ F8 │ │ + * │ CAPS │ │LEFT │DOWN │RIGHT│PGDN │ │ F5 │ F6 │ F7 │ F8 │ QUOT │ * ├──────┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬─────┤ * │ │ │ │ DEL │ INS │ │ │ F9 │ F10 │ F11 │ F12 │ │ * ├────────┬┴─────┴─┬───┴─┬───┴─────┴──┬──┴─────┴─────┴─┬───┴─┬───┴─┬───┴─────┤ @@ -45,7 +61,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_FL] = LAYOUT( _______, XXXXXXX, KC_HOME, KC_UP, KC_END, KC_PGUP, XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, _______, - KC_CAPS, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, XXXXXXX, KC_F5, KC_F6, KC_F7, KC_F8, _______, + KC_CAPS, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, XXXXXXX, KC_F5, KC_F6, KC_F7, KC_F8, KC_QUOT, _______, XXXXXXX, XXXXXXX, KC_DEL, KC_INS, XXXXXXX, XXXXXXX, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), diff --git a/keyboards/stoutgat/config.h b/keyboards/tkw/stoutgat/v1/config.h similarity index 100% rename from keyboards/stoutgat/config.h rename to keyboards/tkw/stoutgat/v1/config.h diff --git a/keyboards/stoutgat/info.json b/keyboards/tkw/stoutgat/v1/info.json similarity index 100% rename from keyboards/stoutgat/info.json rename to keyboards/tkw/stoutgat/v1/info.json diff --git a/keyboards/stoutgat/keymaps/default/keymap.c b/keyboards/tkw/stoutgat/v1/keymaps/default/keymap.c similarity index 100% rename from keyboards/stoutgat/keymaps/default/keymap.c rename to keyboards/tkw/stoutgat/v1/keymaps/default/keymap.c diff --git a/keyboards/stoutgat/keymaps/default/readme.md b/keyboards/tkw/stoutgat/v1/keymaps/default/readme.md similarity index 100% rename from keyboards/stoutgat/keymaps/default/readme.md rename to keyboards/tkw/stoutgat/v1/keymaps/default/readme.md diff --git a/keyboards/stoutgat/readme.md b/keyboards/tkw/stoutgat/v1/readme.md similarity index 95% rename from keyboards/stoutgat/readme.md rename to keyboards/tkw/stoutgat/v1/readme.md index 13953e231908..0904b5127170 100644 --- a/keyboards/stoutgat/readme.md +++ b/keyboards/tkw/stoutgat/v1/readme.md @@ -11,6 +11,6 @@ Inspired by the cftkb Discipline. Make example for this keyboard (after setting up your build environment): - make stoutgat:default + make tkw/stoutgat/v1:default See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/stoutgat/rules.mk b/keyboards/tkw/stoutgat/v1/rules.mk similarity index 100% rename from keyboards/stoutgat/rules.mk rename to keyboards/tkw/stoutgat/v1/rules.mk diff --git a/keyboards/stoutgat/stoutgat.c b/keyboards/tkw/stoutgat/v1/v1.c similarity index 100% rename from keyboards/stoutgat/stoutgat.c rename to keyboards/tkw/stoutgat/v1/v1.c diff --git a/keyboards/stoutgat/stoutgat.h b/keyboards/tkw/stoutgat/v1/v1.h similarity index 100% rename from keyboards/stoutgat/stoutgat.h rename to keyboards/tkw/stoutgat/v1/v1.h diff --git a/keyboards/tkw/stoutgat/v2/config.h b/keyboards/tkw/stoutgat/v2/config.h new file mode 100644 index 000000000000..1c0a66f3c684 --- /dev/null +++ b/keyboards/tkw/stoutgat/v2/config.h @@ -0,0 +1,69 @@ +/* Copyright 2020 Thys de Wet + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x7811 +#define DEVICE_VER 0x0002 +#define MANUFACTURER TKW +#define PRODUCT Stoutgat v2 65% + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + + + +#define MATRIX_COL_PINS { B0, A7, A6, A5, A4, A3, A1, A0, C15, C14, C13, A15, B3, B4, B5} +#define MATRIX_ROW_PINS { B6, A2, B7, B9, B8 } +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +#define MATRIX_IO_DELAY 5 +#define TAP_CODE_DELAY 10 + +#define ENCODERS_PAD_A { B14, B12} +#define ENCODERS_PAD_B { B15, B13 } + +#define RGB_DI_PIN B1 +#define RGBLED_NUM 13 +#define RGBLIGHT_LIMIT_VAL 120 +#define RGBLIGHT_ANIMATIONS + +#define WS2812_PWM_DRIVER PWMD3 +#define WS2812_PWM_CHANNEL 4 +#define WS2812_PWM_PAL_MODE 2 +#define WS2812_DMA_STREAM STM32_DMA1_STREAM2 +#define WS2812_DMA_CHANNEL 5 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/tkw/stoutgat/v2/f411/chconf.h b/keyboards/tkw/stoutgat/v2/f411/chconf.h new file mode 100644 index 000000000000..0b8b69b0e02c --- /dev/null +++ b/keyboards/tkw/stoutgat/v2/f411/chconf.h @@ -0,0 +1,714 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file rt/templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ +#define _CHIBIOS_RT_CONF_VER_6_0_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_ST_RESOLUTION) +#define CH_CFG_ST_RESOLUTION 32 +#endif + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#if !defined(CH_CFG_ST_FREQUENCY) +#define CH_CFG_ST_FREQUENCY 100000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#if !defined(CH_CFG_ST_TIMEDELTA) +#define CH_CFG_ST_TIMEDELTA 2 +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 0 +#endif + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#if !defined(CH_CFG_MEMCORE_SIZE) +#define CH_CFG_MEMCORE_SIZE 0 +#endif + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#if !defined(CH_CFG_NO_IDLE_THREAD) +#define CH_CFG_NO_IDLE_THREAD FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) +#define CH_CFG_OPTIMIZE_SPEED TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_TM) +#define CH_CFG_USE_TM TRUE +#endif + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_REGISTRY) +#define CH_CFG_USE_REGISTRY TRUE +#endif + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_WAITEXIT) +#define CH_CFG_USE_WAITEXIT TRUE +#endif + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_SEMAPHORES) +#define CH_CFG_USE_SEMAPHORES TRUE +#endif + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MUTEXES) +#define CH_CFG_USE_MUTEXES TRUE +#endif + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_CONDVARS) +#define CH_CFG_USE_CONDVARS TRUE +#endif + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE +#endif + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_EVENTS) +#define CH_CFG_USE_EVENTS TRUE +#endif + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MESSAGES) +#define CH_CFG_USE_MESSAGES TRUE +#endif + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_MAILBOXES) +#define CH_CFG_USE_MAILBOXES TRUE +#endif + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMCORE) +#define CH_CFG_USE_MEMCORE TRUE +#endif + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#if !defined(CH_CFG_USE_HEAP) +#define CH_CFG_USE_HEAP TRUE +#endif + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMPOOLS) +#define CH_CFG_USE_MEMPOOLS TRUE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS TRUE +#endif + +/** + * @brief Pipes APIs. + * @details If enabled then the pipes APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_PIPES) +#define CH_CFG_USE_PIPES TRUE +#endif + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#if !defined(CH_CFG_USE_DYNAMIC) +#define CH_CFG_USE_DYNAMIC TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY TRUE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES TRUE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES TRUE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE +#endif + +/** + * @brief Enables factory for Pipes. + */ +#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) +#define CH_CFG_FACTORY_PIPES TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_STATISTICS) +#define CH_DBG_STATISTICS FALSE +#endif + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) +#define CH_DBG_SYSTEM_STATE_CHECK FALSE +#endif + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS FALSE +#endif + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS FALSE +#endif + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK FALSE +#endif + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS FALSE +#endif + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#if !defined(CH_DBG_THREADS_PROFILING) +#define CH_DBG_THREADS_PROFILING FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p _thread_init() function. + * + * @note It is invoked from within @p _thread_init() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/tkw/stoutgat/v2/f411/halconf.h b/keyboards/tkw/stoutgat/v2/f411/halconf.h new file mode 100644 index 000000000000..1f8df5dbbd55 --- /dev/null +++ b/keyboards/tkw/stoutgat/v2/f411/halconf.h @@ -0,0 +1,525 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#define _CHIBIOS_HAL_CONF_ +#define _CHIBIOS_HAL_CONF_VER_7_0_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM TRUE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL TRUE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SIO subsystem. + */ +#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) +#define HAL_USE_SIO FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the TRNG subsystem. + */ +#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) +#define HAL_USE_TRNG FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/** + * @brief Enables the WSPI subsystem. + */ +#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) +#define HAL_USE_WSPI FALSE +#endif + +/*===========================================================================*/ +/* PAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) +#define PAL_USE_CALLBACKS FALSE +#endif + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) +#define PAL_USE_WAIT FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/** + * @brief Enforces the driver to use direct callbacks rather than OSAL events. + */ +#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) +#define CAN_ENFORCE_USE_CALLBACKS FALSE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* DAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) +#define DAC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define DAC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the zero-copy API. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/** + * @brief OCR initialization constant for V20 cards. + */ +#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) +#define SDC_INIT_OCR_V20 0x50FF8000U +#endif + +/** + * @brief OCR initialization constant for non-V20 cards. + */ +#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) +#define SDC_INIT_OCR 0x80100000U +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables circular transfers APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) +#define SPI_USE_CIRCULAR FALSE +#endif + + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/** + * @brief Handling method for SPI CS line. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) +#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +/*===========================================================================*/ +/* WSPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) +#define WSPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define WSPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/keyboards/tkw/stoutgat/v2/f411/mcuconf.h b/keyboards/tkw/stoutgat/v2/f411/mcuconf.h new file mode 100644 index 000000000000..f3a017731c4a --- /dev/null +++ b/keyboards/tkw/stoutgat/v2/f411/mcuconf.h @@ -0,0 +1,253 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 25 +#define STM32_PLLN_VALUE 384 +#define STM32_PLLP_VALUE 4 +#define STM32_PLLQ_VALUE 8 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 15 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_PRIORITY 6 +#define STM32_IRQ_EXTI21_PRIORITY 15 +#define STM32_IRQ_EXTI22_PRIORITY 15 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * I2S driver system settings. + */ +#define STM32_I2S_USE_SPI2 FALSE +#define STM32_I2S_USE_SPI3 FALSE +#define STM32_I2S_SPI2_IRQ_PRIORITY 10 +#define STM32_I2S_SPI3_IRQ_PRIORITY 10 +#define STM32_I2S_SPI2_DMA_PRIORITY 1 +#define STM32_I2S_SPI3_DMA_PRIORITY 1 +#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 TRUE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 TRUE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 TRUE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG_THREAD_PRIO NORMALPRIO+1 +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#endif /* MCUCONF_H */ diff --git a/keyboards/tkw/stoutgat/v2/f411/rules.mk b/keyboards/tkw/stoutgat/v2/f411/rules.mk new file mode 100644 index 000000000000..4f7f52e62bf9 --- /dev/null +++ b/keyboards/tkw/stoutgat/v2/f411/rules.mk @@ -0,0 +1,5 @@ +# MCU name +MCU = STM32F411 + +# Address of the bootloader in system memory +STM32_BOOTLOADER_ADDRESS = 0x1FFF0000 diff --git a/keyboards/tkw/stoutgat/v2/info.json b/keyboards/tkw/stoutgat/v2/info.json new file mode 100644 index 000000000000..48288096b151 --- /dev/null +++ b/keyboards/tkw/stoutgat/v2/info.json @@ -0,0 +1,89 @@ +{ + "keyboard_name": "stoutgat/v2", + "url": "https://github.com/vattern/stoutgatv2", + "maintainer": "vattern", + "manufacturer": "tkw", + "width": 17.25, + "height": 5, + "layouts": { + "LAYOUT_encoder": { + "layout": [ + {"x": 1.25, "y": 0}, + {"x": 2.25, "y": 0}, + {"x": 3.25, "y": 0}, + {"x": 4.25, "y": 0}, + {"x": 5.25, "y": 0}, + {"x": 6.25, "y": 0}, + {"x": 7.25, "y": 0}, + {"x": 8.25, "y": 0}, + {"x": 9.25, "y": 0}, + {"x": 10.25, "y": 0}, + {"x": 11.25, "y": 0}, + {"x": 12.25, "y": 0}, + {"x": 13.25, "y": 0}, + {"x": 14.25, "y": 0, "w": 2}, + {"x": 16.25, "y": 0}, + + {"x": 1.25, "y": 1, "w": 1.5}, + {"x": 2.75, "y": 1}, + {"x": 3.75, "y": 1}, + {"x": 4.75, "y": 1}, + {"x": 5.75, "y": 1}, + {"x": 6.75, "y": 1}, + {"x": 7.75, "y": 1}, + {"x": 8.75, "y": 1}, + {"x": 9.75, "y": 1}, + {"x": 10.75, "y": 1}, + {"x": 11.75, "y": 1}, + {"x": 12.75, "y": 1}, + {"x": 13.75, "y": 1}, + {"x": 16.25, "y": 1}, + + {"x": 1.25, "y": 2, "w": 1.75}, + {"x": 3.0, "y": 2}, + {"x": 4.0, "y": 2}, + {"x": 5.0, "y": 2}, + {"x": 6.0, "y": 2}, + {"x": 7.0, "y": 2}, + {"x": 8.0, "y": 2}, + {"x": 9.0, "y": 2}, + {"x": 10.0, "y": 2}, + {"x": 11.0, "y": 2}, + {"x": 12.0, "y": 2}, + {"x": 13.0, "y": 2}, + {"x": 14.0, "y": 2}, + {"x": 15.0, "y": 1, "w": 1.25, "h": 2}, + {"x": 16.25, "y": 2}, + + {"x": 0, "y": 3}, + + {"x": 1.25, "y": 3, "w": 1.25}, + {"x": 2.5, "y": 3}, + {"x": 3.5, "y": 3}, + {"x": 4.5, "y": 3}, + {"x": 5.5, "y": 3}, + {"x": 6.5, "y": 3}, + {"x": 7.5, "y": 3}, + {"x": 8.5, "y": 3}, + {"x": 9.5, "y": 3}, + {"x": 10.5, "y": 3}, + {"x": 11.5, "y": 3}, + {"x": 12.5, "y": 3}, + {"x": 13.5, "y": 3, "w": 1.75}, + {"x": 15.25, "y": 3}, + {"x": 16.25, "y": 3}, + + {"x": 1.25, "y": 4, "w": 1.25}, + {"x": 2.5, "y": 4, "w": 1.25}, + {"x": 3.75, "y": 4, "w": 1.25}, + {"x": 5.0, "y": 4, "w": 6.25}, + {"x": 11.25, "y": 4}, + {"x": 12.25, "y": 4}, + {"x": 13.25, "y": 4}, + {"x": 14.25, "y": 4}, + {"x": 15.25, "y": 4}, + {"x": 16.25, "y": 4} + ] + } + } +} diff --git a/keyboards/tkw/stoutgat/v2/keymaps/ansi/keymap.c b/keyboards/tkw/stoutgat/v2/keymaps/ansi/keymap.c new file mode 100644 index 000000000000..618d336cdb92 --- /dev/null +++ b/keyboards/tkw/stoutgat/v2/keymaps/ansi/keymap.c @@ -0,0 +1,72 @@ +#include QMK_KEYBOARD_H + +enum layers { + _BL, + _FL, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_65_ansi_blocker( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT), + + [1] = LAYOUT_65_ansi_blocker( + /* esc 1 2 3 4 5 6 7 8 9 0 - = bkspc `~ */ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, RESET, + /* tab Q W E R T Y U I O P [ ] \ delete*/ + RGB_MOD, RGB_VAI, RGB_SAI, RGB_HUI, RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_INS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAUS, KC_TRNS, KC_TRNS, + /* caps A S D F G H J K L ; ' enter pg up*/ + RGB_TOG, RGB_VAD, RGB_SAD, RGB_HUD, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, + /* shift Z X C V B N M , . / shift up pg dn*/ + KC_LSFT, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_RSFT, KC_VOLU, KC_END, + /* ctrl win alt space alt fn ctrl left down right*/ + KC_LCTL, KC_LGUI, KC_LALT, KC_TRNS, KC_RALT, KC_TRNS, KC_TRNS, KC_VOLD, KC_TRNS) +}; + +#ifdef ENCODER_ENABLE +void encoder_update_user(uint8_t index, bool clockwise){ + + if (index == 0) { + switch (get_highest_layer(layer_state)) { + case _BL: + // Move whole words. Hold shift to select while moving. + if (clockwise) { + tap_code16(C(KC_RGHT)); + } else { + tap_code16(C(KC_LEFT)); + } + break; + default: + // History scrubbing. For Adobe products, hold shift while moving + // backward to go forward instead. + if (clockwise) { + tap_code16(C(KC_Z)); + } else { + tap_code16(C(KC_Y)); + } + break; + } + } else if (index == 1) { + switch (get_highest_layer(layer_state)) { + case _BL: + // Scrolling with PageUp and PgDn. + if (clockwise) { + tap_code16(KC_PGDN); + } else { + tap_code16(KC_PGUP); + } + break; + default: + if (clockwise) { + tap_code16(A(KC_TAB)); + } else { + tap_code16(A(S(KC_TAB))); + } + break; + } + } +} +#endif diff --git a/keyboards/tkw/stoutgat/v2/keymaps/default/keymap.c b/keyboards/tkw/stoutgat/v2/keymaps/default/keymap.c new file mode 100644 index 000000000000..c794c9c64327 --- /dev/null +++ b/keyboards/tkw/stoutgat/v2/keymaps/default/keymap.c @@ -0,0 +1,79 @@ +#include QMK_KEYBOARD_H + +enum layers { + _BL, + _FL, +}; + + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_encoder( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGUP, + KC_MPLY, KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_encoder( + /* esc 1 2 3 4 5 6 7 8 9 0 - = bkspc `~ */ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, RESET, + /* tab Q W E R T Y U I O P [ ] delete */ + RGB_MOD, RGB_VAI, RGB_SAI, RGB_HUI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAUS, KC_TRNS, + /* caps A S D F G H J K L ; ' # enter pg up */ + RGB_TOG, RGB_VAD, RGB_SAD, RGB_HUD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_HOME, + /* shift \ Z X C V B N M , . / shift up pg dn */ + KC_MPLY, KC_LSFT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_RSFT, KC_VOLU, KC_END, + /* ctrl win alt space alt fn ctrl left down right */ + KC_LCTL, KC_LGUI, KC_LALT, KC_TRNS, KC_RALT, KC_TRNS, KC_RCTL, KC_TRNS, KC_VOLD, KC_TRNS + ) +}; + + + + +#ifdef ENCODER_ENABLE +void encoder_update_user(uint8_t index, bool clockwise){ + + if (index == 0) { + switch (get_highest_layer(layer_state)) { + case _BL: + // Move whole words. Hold shift to select while moving. + if (clockwise) { + tap_code16(C(KC_RGHT)); + } else { + tap_code16(C(KC_LEFT)); + } + break; + default: + // History scrubbing. For Adobe products, hold shift while moving + // backward to go forward instead. + if (clockwise) { + tap_code16(C(KC_Z)); + } else { + tap_code16(C(KC_Y)); + } + break; + } + } else if (index == 1) { + switch (get_highest_layer(layer_state)) { + case _BL: + // Scrolling with PageUp and PgDn. + if (clockwise) { + tap_code16(KC_PGDN); + } else { + tap_code16(KC_PGUP); + } + break; + default: + if (clockwise) { + tap_code16(A(KC_TAB)); + } else { + tap_code16(A(S(KC_TAB))); + } + break; + } + } +} +#endif diff --git a/keyboards/tkw/stoutgat/v2/readme.md b/keyboards/tkw/stoutgat/v2/readme.md new file mode 100644 index 000000000000..192fca3d16f3 --- /dev/null +++ b/keyboards/tkw/stoutgat/v2/readme.md @@ -0,0 +1,15 @@ +# stoutgat v2 + +![stoutgatv2](https://i.imgur.com/CCiP2Ffl.jpg) + +ARM 65% mechanical keyboard with RGB underglow and dual encoders. + +* Keyboard Maintainer: [vattern](https://github.com/vattern) +* Hardware Supported: f411 blackpill +* Hardware Availability: [stoutgatv2](https://github.com/vattern/stoutgatv2) + +Make example for this keyboard (after setting up your build environment): + + qmk flash -kb tkw/stoutgat/v2 -km default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/tkw/stoutgat/v2/rules.mk b/keyboards/tkw/stoutgat/v2/rules.mk new file mode 100644 index 000000000000..587a17780a63 --- /dev/null +++ b/keyboards/tkw/stoutgat/v2/rules.mk @@ -0,0 +1,24 @@ +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +KEYBOARD_SHARED_EP = yes # Free up some extra endpoints - needed if console+mouse+extra +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +ENCODER_ENABLE = yes # Enable rotary encoder support +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output + +WS2812_DRIVER = pwm +OPT_DEFS += -DSTM32_DMA_REQUIRED=TRUE + +DEFAULT_FOLDER = tkw/stoutgat/v2/f411 +LAYOUTS = 65_iso 65_ansi diff --git a/keyboards/tkw/stoutgat/v2/v2.c b/keyboards/tkw/stoutgat/v2/v2.c new file mode 100644 index 000000000000..030f056abf2a --- /dev/null +++ b/keyboards/tkw/stoutgat/v2/v2.c @@ -0,0 +1,16 @@ +/* Copyright 2020 Thys de Wet + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "v2.h" diff --git a/keyboards/tkw/stoutgat/v2/v2.h b/keyboards/tkw/stoutgat/v2/v2.h new file mode 100644 index 000000000000..ff44742ff564 --- /dev/null +++ b/keyboards/tkw/stoutgat/v2/v2.h @@ -0,0 +1,75 @@ +/* Copyright 2020 Thys de Wet + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#define _x_ KC_NO + +#include "quantum.h" + +#define LAYOUT_encoder( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K1D, K2E, \ + K44, K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K46, K49, K4A, K4B, K4C, K4D, K4E \ +) { \ +{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ +{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ +{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, _x_, K2E }, \ +{ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ +{ K40, K41, K42, _x_, K44, _x_, K46, _x_, _x_, K49, K4A, K4B, K4C, K4D, K4E } \ +} +#define LAYOUT_65_iso( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K1D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K46, K49, K4A, K4B, K4C, K4D, K4E \ +) { \ +{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ +{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ +{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, _x_, K2E }, \ +{ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ +{ K40, K41, K42, _x_, _x_, _x_, K46, _x_, _x_, K49, K4A, K4B, K4C, K4D, K4E } \ +} + +#define LAYOUT_65_ansi( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K46, K49, K4A, K4B, K4C, K4D, K4E \ +) { \ +{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ +{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ +{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, _x_, K2D, K2E }, \ +{ K30, _x_, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ +{ K40, K41, K42, _x_, _x_, _x_, K46, _x_, _x_, K49, K4A, K4B, K4C, K4D, K4E} \ +} + +#define LAYOUT_65_ansi_blocker( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K46, K49, K4B, K4C, K4D, K4E \ +) { \ +{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ +{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ +{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, _x_, K2E }, \ +{ K30, _x_, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ +{ K40, K41, K42, _x_, _x_, _x_, K46, _x_, _x_, K49, _x_, K4B, K4C, K4D, K4E} \ +} diff --git a/keyboards/torn/config.h b/keyboards/torn/config.h new file mode 100644 index 000000000000..6cd6c2808e88 --- /dev/null +++ b/keyboards/torn/config.h @@ -0,0 +1,68 @@ +/* + * Copyright 2020 Richard Titmuss + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +/* VID & PID from vusb project, see tmk_core/protocol/vusb/USB-IDs-for-free.txt"*/ +#define VENDOR_ID 0x7274 +#define PRODUCT_ID 0x0001 +#define DEVICE_VER 0x0000 +#define MANUFACTURER richard.titmuss +#define PRODUCT Torn + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS \ + { D4, D1, D0, D5 } +#define MATRIX_COL_PINS \ + { B3, B4, B5, B0, D7, D6 } +#define UNUSED_PINS + +#define SECONDARY_ROW_PINS \ + { (1 << 5), (1 << 6), (1 << 7), (1 << 4) } +#define SECONDARY_COL_PINS \ + { (1 << 3), (1 << 2), (1 << 1), (1 << 0), (1 << 15), (1 << 14) } + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +#define ENCODERS_PAD_A \ + { B2 } +#define ENCODERS_PAD_B \ + { B1 } + +#define USB_MAX_POWER_CONSUMPTION 100 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +#define OLED_TIMEOUT 60000 diff --git a/keyboards/torn/info.json b/keyboards/torn/info.json new file mode 100644 index 000000000000..340eb73597dc --- /dev/null +++ b/keyboards/torn/info.json @@ -0,0 +1,57 @@ +{ + "keyboard_name": "Torn / Split Through Hole", + "url": "https://github.com/rtitmuss/torn", + "maintainer": "rtitmuss", + "width": 15, + "height": 4.55, + "layouts": { + "LAYOUT_split_3x6_4": { + "layout": [ + {"label":"SW1", "x":0, "y":0.375}, + {"label":"SW2", "x":1, "y":0.375}, + {"label":"SW3", "x":2, "y":0.125}, + {"label":"SW4", "x":3, "y":0}, + {"label":"SW5", "x":4, "y":0.125}, + {"label":"SW6", "x":5, "y":0.25}, + {"label":"SW23", "x":9, "y":0.25}, + {"label":"SW24", "x":10, "y":0.125}, + {"label":"SW25", "x":11, "y":0}, + {"label":"SW26", "x":12, "y":0.125}, + {"label":"SW27", "x":13, "y":0.375}, + {"label":"SW28", "x":14, "y":0.375}, + {"label":"SW7", "x":0, "y":1.375}, + {"label":"SW8", "x":1, "y":1.375}, + {"label":"SW9", "x":2, "y":1.125}, + {"label":"SW10", "x":3, "y":1}, + {"label":"SW11", "x":4, "y":1.125}, + {"label":"SW12", "x":5, "y":1.25}, + {"label":"SW29", "x":9, "y":1.25}, + {"label":"SW30", "x":10, "y":1.125}, + {"label":"SW31", "x":11, "y":1}, + {"label":"SW32", "x":12, "y":1.125}, + {"label":"SW33", "x":13, "y":1.375}, + {"label":"SW34", "x":14, "y":1.375}, + {"label":"SW13", "x":0, "y":2.375}, + {"label":"SW14", "x":1, "y":2.375}, + {"label":"SW15", "x":2, "y":2.125}, + {"label":"SW16", "x":3, "y":2}, + {"label":"SW17", "x":4, "y":2.125}, + {"label":"SW18", "x":5, "y":2.25}, + {"label":"SW35", "x":9, "y":2.25}, + {"label":"SW36", "x":10, "y":2.125}, + {"label":"SW37", "x":11, "y":2}, + {"label":"SW38", "x":12, "y":2.125}, + {"label":"SW39", "x":13, "y":2.375}, + {"label":"SW40", "x":14, "y":2.375}, + {"label":"SW19", "x":3, "y":3.1}, + {"label":"SW20", "x":4, "y":3.25}, + {"label":"SW21", "x":5, "y":3.40}, + {"label":"SW22", "x":6, "y":3.55}, + {"label":"SW41", "x":8, "y":3.55}, + {"label":"SW42", "x":9, "y":3.40}, + {"label":"SW43", "x":10, "y":3.25}, + {"label":"SW44", "x":11, "y":3.1} + ] + } + } +} diff --git a/keyboards/torn/keymaps/default/keymap.c b/keyboards/torn/keymaps/default/keymap.c new file mode 100644 index 000000000000..7c91325bdc30 --- /dev/null +++ b/keyboards/torn/keymaps/default/keymap.c @@ -0,0 +1,119 @@ +/* Copyright 2020 Richard Titmuss (richard.titmuss@gmail.com) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum torn_layers { _QWERTY, _LOWER, _RAISE, _ADJUST }; + +#define S_BSPC LSFT_T(KC_BSPC) +#define R_DEL LT(_RAISE, KC_DEL) +#define G_ENT LGUI_T(KC_ENT) +#define L_SPC LT(_LOWER, KC_SPC) + +// clang-format off +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------. ,-----------------------------------------. + * | Tab | Q | W | E | R | T | | Y | U | I | O | P | ' | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | ` | A | S | D | F | G | | H | J | K | L | ; | [ | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | \ | Z | X | C | V | B | | N | M | , | . | / | ] | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | ____ | Ctrl | Bksp | Del | |Enter |Space | Alt | ____ | + * | | |Shift |Raise | | Gui |Lower | | | + * `---------------------------' `---------------------------' + */ +[_QWERTY] = LAYOUT_split_3x6_4( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_QUOT, + KC_GRV, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_LBRC, + KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RBRC , + _______, KC_LCTL, S_BSPC, R_DEL, G_ENT, L_SPC, KC_RALT, _______ +), + +/* Lower + * ,-----------------------------------------. ,-----------------------------------------. + * | Esc | ! | @ | # | $ | % | | ^ | & | * | ( | ) | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | = | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | - | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | _ | | | | | | | | | , | . | / | + | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | ____ | Ctrl | Bksp | Del | |Enter |Space | Alt | ____ | + * | | |Shift |Raise | | Gui |Lower | | | + * `---------------------------' `---------------------------' + */ +[_LOWER] = LAYOUT_split_3x6_4( + KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_PMNS, + KC_UNDS, _______, _______, _______, _______, _______, _______, _______, KC_COMM, KC_DOT, KC_SLSH, KC_PPLS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS +), + +/* Raise + * ,-----------------------------------------. ,-----------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | & | * | ( | ) | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | F6 | F7 | F8 | F9 | F10 | | Home | Left | Down | Right| End | PgUp | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | F11 | F12 | | | | | | | | | | PgDn | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | ____ | Ctrl | Bksp | Del | |Enter |Space | Alt | ____ | + * | | |Shift |Raise | | Gui |Lower | | | + * `---------------------------' `---------------------------' + */ +[_RAISE] = LAYOUT_split_3x6_4( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, S(A(KC_LEFT)), KC_UP, S(A(KC_RGHT)), _______, _______, + _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, KC_PGUP, + _______, KC_F11, KC_F12, _______, _______, _______, A(KC_BSPC), A(KC_LEFT), S(KC_DOWN), A(KC_RGHT), _______, KC_PGDN , + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS +), + +/* Adjust (Lower + Raise) + * ,-----------------------------------------. ,-----------------------------------------. + * | | | | | | | | | | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | | | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | | | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | ____ | Ctrl | Bksp | Del | |Enter |Space | Alt | ____ | + * | | |Shift |Raise | | Gui |Lower | | | + * `---------------------------' `---------------------------' + */ +[_ADJUST] = LAYOUT_split_3x6_4( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS +) + +}; + +const uint16_t PROGMEM encoder_keymaps[][2][2] = { + [_QWERTY] = { { C(S(KC_TAB)), C(KC_TAB) }, { KC_PGDN, KC_PGUP } }, + [_LOWER] = { { C(KC_LEFT), C(KC_RGHT) }, { KC__VOLDOWN, KC__VOLUP } }, + [_RAISE] = { { KC_TRNS, KC_TRNS }, { G(KC_TAB), G(S(KC_TAB)) } }, + [_ADJUST] = { { KC_TRNS, KC_TRNS }, { KC_TRNS, KC_TRNS } }, +}; +// clang-format on + +layer_state_t layer_state_set_user(layer_state_t state) { + torn_set_led(0, IS_LAYER_ON_STATE(state, _RAISE)); + torn_set_led(1, IS_LAYER_ON_STATE(state, _LOWER)); + return state; +} diff --git a/keyboards/torn/keymaps/via/keymap.c b/keyboards/torn/keymaps/via/keymap.c new file mode 100644 index 000000000000..7c91325bdc30 --- /dev/null +++ b/keyboards/torn/keymaps/via/keymap.c @@ -0,0 +1,119 @@ +/* Copyright 2020 Richard Titmuss (richard.titmuss@gmail.com) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum torn_layers { _QWERTY, _LOWER, _RAISE, _ADJUST }; + +#define S_BSPC LSFT_T(KC_BSPC) +#define R_DEL LT(_RAISE, KC_DEL) +#define G_ENT LGUI_T(KC_ENT) +#define L_SPC LT(_LOWER, KC_SPC) + +// clang-format off +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------. ,-----------------------------------------. + * | Tab | Q | W | E | R | T | | Y | U | I | O | P | ' | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | ` | A | S | D | F | G | | H | J | K | L | ; | [ | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | \ | Z | X | C | V | B | | N | M | , | . | / | ] | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | ____ | Ctrl | Bksp | Del | |Enter |Space | Alt | ____ | + * | | |Shift |Raise | | Gui |Lower | | | + * `---------------------------' `---------------------------' + */ +[_QWERTY] = LAYOUT_split_3x6_4( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_QUOT, + KC_GRV, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_LBRC, + KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RBRC , + _______, KC_LCTL, S_BSPC, R_DEL, G_ENT, L_SPC, KC_RALT, _______ +), + +/* Lower + * ,-----------------------------------------. ,-----------------------------------------. + * | Esc | ! | @ | # | $ | % | | ^ | & | * | ( | ) | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | = | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | - | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | _ | | | | | | | | | , | . | / | + | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | ____ | Ctrl | Bksp | Del | |Enter |Space | Alt | ____ | + * | | |Shift |Raise | | Gui |Lower | | | + * `---------------------------' `---------------------------' + */ +[_LOWER] = LAYOUT_split_3x6_4( + KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_PMNS, + KC_UNDS, _______, _______, _______, _______, _______, _______, _______, KC_COMM, KC_DOT, KC_SLSH, KC_PPLS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS +), + +/* Raise + * ,-----------------------------------------. ,-----------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | & | * | ( | ) | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | F6 | F7 | F8 | F9 | F10 | | Home | Left | Down | Right| End | PgUp | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | F11 | F12 | | | | | | | | | | PgDn | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | ____ | Ctrl | Bksp | Del | |Enter |Space | Alt | ____ | + * | | |Shift |Raise | | Gui |Lower | | | + * `---------------------------' `---------------------------' + */ +[_RAISE] = LAYOUT_split_3x6_4( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, S(A(KC_LEFT)), KC_UP, S(A(KC_RGHT)), _______, _______, + _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, KC_PGUP, + _______, KC_F11, KC_F12, _______, _______, _______, A(KC_BSPC), A(KC_LEFT), S(KC_DOWN), A(KC_RGHT), _______, KC_PGDN , + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS +), + +/* Adjust (Lower + Raise) + * ,-----------------------------------------. ,-----------------------------------------. + * | | | | | | | | | | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | | | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | | | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | ____ | Ctrl | Bksp | Del | |Enter |Space | Alt | ____ | + * | | |Shift |Raise | | Gui |Lower | | | + * `---------------------------' `---------------------------' + */ +[_ADJUST] = LAYOUT_split_3x6_4( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS +) + +}; + +const uint16_t PROGMEM encoder_keymaps[][2][2] = { + [_QWERTY] = { { C(S(KC_TAB)), C(KC_TAB) }, { KC_PGDN, KC_PGUP } }, + [_LOWER] = { { C(KC_LEFT), C(KC_RGHT) }, { KC__VOLDOWN, KC__VOLUP } }, + [_RAISE] = { { KC_TRNS, KC_TRNS }, { G(KC_TAB), G(S(KC_TAB)) } }, + [_ADJUST] = { { KC_TRNS, KC_TRNS }, { KC_TRNS, KC_TRNS } }, +}; +// clang-format on + +layer_state_t layer_state_set_user(layer_state_t state) { + torn_set_led(0, IS_LAYER_ON_STATE(state, _RAISE)); + torn_set_led(1, IS_LAYER_ON_STATE(state, _LOWER)); + return state; +} diff --git a/keyboards/torn/keymaps/via/rules.mk b/keyboards/torn/keymaps/via/rules.mk new file mode 100644 index 000000000000..36b7ba9cbc98 --- /dev/null +++ b/keyboards/torn/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/torn/matrix.c b/keyboards/torn/matrix.c new file mode 100644 index 000000000000..dd7fa1e2e1c3 --- /dev/null +++ b/keyboards/torn/matrix.c @@ -0,0 +1,113 @@ +/* + * Copyright 2020 Richard Titmuss (richard.titmuss@gmail.com) + * Copyright 2012-2018 Jun Wako, Jack Humbert, Yiancar + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +#include "mcp23018.h" + +#define SPLIT_MATRIX_COLS (MATRIX_COLS / 2) +#define SECONDARY_ROW_OFFSET (MATRIX_ROWS / 2) + +typedef uint16_t mcp23018_pin_t; + +static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; +static const pin_t col_pins[SPLIT_MATRIX_COLS] = MATRIX_COL_PINS; +static const mcp23018_pin_t secondary_row_pins[MATRIX_ROWS] = SECONDARY_ROW_PINS; +static const mcp23018_pin_t secondary_col_pins[SPLIT_MATRIX_COLS] = SECONDARY_COL_PINS; + +static void select_row(uint8_t row) { + setPinOutput(row_pins[row]); + writePinLow(row_pins[row]); +} + +static void unselect_row(uint8_t row) { setPinInputHigh(row_pins[row]); } + +static void unselect_rows(void) { + for (uint8_t x = 0; x < MATRIX_ROWS; x++) { + setPinInputHigh(row_pins[x]); + } +} + +static void select_secondary_row(uint8_t row) { + uint8_t gpioa = 0xFF & ~secondary_row_pins[row]; + mcp23018_writeReg(GPIOA, &gpioa, 1); +} + +static void init_pins(void) { + unselect_rows(); + for (uint8_t x = 0; x < SPLIT_MATRIX_COLS; x++) { + setPinInputHigh(col_pins[x]); + } +} + +static matrix_row_t read_cols(void) { + matrix_row_t state = 0; + + // For each col... + for (uint8_t col_index = 0; col_index < SPLIT_MATRIX_COLS; col_index++) { + // Select the col pin to read (active low) + uint8_t pin_state = readPin(col_pins[col_index]); + + // Populate the matrix row with the state of the col pin + state |= pin_state ? 0 : (MATRIX_ROW_SHIFTER << col_index); + } + + return state; +} + +static matrix_row_t read_secondary_cols(void) { + matrix_row_t state = 0; + + uint8_t mcp23018_pin_state[2]; + if (mcp23018_readReg(GPIOA, mcp23018_pin_state, 2)) { + return 0; + } + + uint16_t pins = mcp23018_pin_state[0] | (mcp23018_pin_state[1] << 8); + + for (uint8_t col_index = 0; col_index < SPLIT_MATRIX_COLS; col_index++) { + uint16_t pin_state = pins & (secondary_col_pins[col_index]); + state |= pin_state ? 0 : (MATRIX_ROW_SHIFTER << col_index); + } + + return state; +} + +static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) { + matrix_row_t last_row_value = current_matrix[current_row]; + + select_row(current_row); + select_secondary_row(current_row); + + current_matrix[current_row] = read_cols() | (read_secondary_cols() << 6); + + unselect_row(current_row); + + return (last_row_value != current_matrix[current_row]); +} + +void matrix_init_custom(void) { init_pins(); } + +bool matrix_scan_custom(matrix_row_t current_matrix[]) { + bool changed = false; + + for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { + changed |= read_cols_on_row(current_matrix, current_row); + } + + return changed; +} diff --git a/keyboards/torn/mcp23018.c b/keyboards/torn/mcp23018.c new file mode 100644 index 000000000000..c180f1dae5a3 --- /dev/null +++ b/keyboards/torn/mcp23018.c @@ -0,0 +1,63 @@ +/* + * Copyright 2020 Richard Titmuss (richard.titmuss@gmail.com) + * Copyright 2012-2018 Jun Wako, Jack Humbert, Yiancar + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +#include "i2c_master.h" +#include "mcp23018.h" + +#define MCP23018_ADDR 0b0100000 + +#define MCP23018_TIMEOUT 100 + +static i2c_status_t mcp23018_status = I2C_STATUS_ERROR; + +void msp23018_init(void) { + mcp23018_status = I2C_STATUS_SUCCESS; + + // Set pin direction + uint8_t iodir[] = {0b00001111, 0b11111111}; + mcp23018_writeReg(IODIRA, iodir, 2); + + // Set pull-up + uint8_t gppu[] = {0b00001111, 0b11111000}; + mcp23018_writeReg(GPPUA, gppu, 2); + + // LEDs output high + uint8_t gpio[] = {0b00000000, 0b00000111}; + mcp23018_writeReg(GPIOA, gpio, 2); +} + +bool mcp23018_reset_required(void) { return mcp23018_status != I2C_STATUS_SUCCESS; } + +i2c_status_t mcp23018_writeReg(uint8_t regaddr, const uint8_t* data, uint16_t length) { + if (mcp23018_status) { + return mcp23018_status; + } + + mcp23018_status = i2c_writeReg((MCP23018_ADDR << 1), regaddr, data, length, MCP23018_TIMEOUT); + return mcp23018_status; +} + +i2c_status_t mcp23018_readReg(uint8_t regaddr, uint8_t* data, uint16_t length) { + if (mcp23018_status) { + return mcp23018_status; + } + + mcp23018_status = i2c_readReg((MCP23018_ADDR << 1), regaddr, data, length, MCP23018_TIMEOUT); + return mcp23018_status; +} diff --git a/keyboards/torn/mcp23018.h b/keyboards/torn/mcp23018.h new file mode 100644 index 000000000000..17ecaa5a7c3b --- /dev/null +++ b/keyboards/torn/mcp23018.h @@ -0,0 +1,32 @@ +/* + * Copyright 2020 Richard Titmuss (richard.titmuss@gmail.com) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#define IODIRA 0x00 +#define IODIRB 0x01 +#define GPPUA 0x0C +#define GPPUB 0x0D +#define GPIOA 0x12 +#define GPIOB 0x13 + +typedef int16_t mcp23018_status_t; + +void msp23018_init(void); +bool mcp23018_reset_required(void); +mcp23018_status_t mcp23018_writeReg(uint8_t regaddr, const uint8_t* data, uint16_t length); +mcp23018_status_t mcp23018_readReg(uint8_t regaddr, uint8_t* data, uint16_t length); diff --git a/keyboards/torn/readme.md b/keyboards/torn/readme.md new file mode 100644 index 000000000000..ffe9a2d9c2b7 --- /dev/null +++ b/keyboards/torn/readme.md @@ -0,0 +1,21 @@ +# TORN// Split Through Hole + +![torn](https://raw.githubusercontent.com/rtitmuss/torn/master/doc/img/torn.jpg) + +The split keyboard kit made by through hole components only. + +The design has been inspired by the Corne, Plaid and Discipline keyboards. + +* Keyboard Maintainer: [rtitmuss](https://github.com/rtitmuss) +* Hardware Supported: TORN, atmega328p +* Hardware Availability: [GitHub](https://github.com/rtitmuss/torn) + +Make example for this keyboard (after setting up your build environment): + + make torn:default + +Flashing example for this keyboard: + + make torn:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/torn/rules.mk b/keyboards/torn/rules.mk new file mode 100644 index 000000000000..caf544d1370c --- /dev/null +++ b/keyboards/torn/rules.mk @@ -0,0 +1,27 @@ +# MCU name +MCU = atmega328p + +# Bootloader selection +BOOTLOADER = USBasp + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = no # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +ENCODER_ENABLE = yes # Enable rotary encoder +OLED_DRIVER_ENABLE = yes +CUSTOM_MATRIX = lite + +SRC += matrix.c \ + mcp23018.c \ + torn_encoder.c \ + torn_oled.c +QUANTUM_LIB_SRC += i2c_master.c diff --git a/keyboards/torn/torn.c b/keyboards/torn/torn.c new file mode 100644 index 000000000000..ef5060e6028b --- /dev/null +++ b/keyboards/torn/torn.c @@ -0,0 +1,50 @@ +/* + * Copyright 2020 Richard Titmuss + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "torn.h" +#include "i2c_master.h" +#include "mcp23018.h" + +static uint8_t led_state[3] = {1, 1, 1}; + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + i2c_init(); + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + if (mcp23018_reset_required()) { + msp23018_init(); + secondary_encoder_init(); + // torn_set_led(2, 1); + } + + matrix_scan_user(); + secondary_encoder_read(); +} + +void torn_set_led(uint8_t led, bool state) { + led_state[led] = !state; + + // toggle leds by setting the pin direction + uint8_t iodir = 0b11111000 | led_state[0] << 2 | led_state[1] << 1 | led_state[2]; + mcp23018_writeReg(IODIRB, &iodir, 1); +} diff --git a/keyboards/torn/torn.h b/keyboards/torn/torn.h new file mode 100644 index 000000000000..c25b5c2a0c29 --- /dev/null +++ b/keyboards/torn/torn.h @@ -0,0 +1,41 @@ +/* + * Copyright 2020 Richard Titmuss + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define ___ KC_NO + +// clang-format off +#define LAYOUT_split_3x6_4( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k32, k33, k34, k35, k36, k37, k38, k39 \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ + { ___, ___, k32, k33, k34, k35, k36, k37, k38, k39, ___, ___ } \ +} +// clang-format on + +void torn_set_led(uint8_t led, bool on); + +void secondary_encoder_read(void); +void secondary_encoder_init(void); diff --git a/keyboards/torn/torn_encoder.c b/keyboards/torn/torn_encoder.c new file mode 100644 index 000000000000..ef9b0873fb84 --- /dev/null +++ b/keyboards/torn/torn_encoder.c @@ -0,0 +1,86 @@ +/* + * Copyright 2020 Richard Titmuss + * Copyright 2018 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "torn.h" +#include "mcp23018.h" + +#ifndef ENCODER_RESOLUTION +# define ENCODER_RESOLUTION 4 +#endif + +#define ENCODER_CLOCKWISE true +#define ENCODER_COUNTER_CLOCKWISE false + +static int8_t encoder_LUT[] = {0, -1, 1, 0, 1, 0, 0, -1, -1, 0, 0, 1, 0, 1, -1, 0}; + +static uint8_t encoder_state = 0; +static int8_t encoder_pulses = 0; + +extern const uint16_t PROGMEM encoder_keymaps[][2][2]; + +/** + * Tap on encoder updates using the encoder keymap + */ +void encoder_update_kb(uint8_t index, bool clockwise) { + int layer = get_highest_layer(layer_state); + + uint16_t code; + do { + code = pgm_read_word(&encoder_keymaps[layer--][index][clockwise]); + } while (code == KC_TRNS); + + tap_code16(code); +} + +static bool encoder_read_state(uint8_t *state) { + uint8_t mcp23018_pin_state; + mcp23018_status_t status = mcp23018_readReg(GPIOB, &mcp23018_pin_state, 1); + if (status == 0) { + *state = (mcp23018_pin_state & 0b110000) >> 4; + return true; + } + return false; +} + +static void encoder_update(int8_t index, uint8_t state) { + encoder_pulses += encoder_LUT[state & 0xF]; + if (encoder_pulses >= ENCODER_RESOLUTION) { + encoder_update_kb(index, ENCODER_CLOCKWISE); + } + if (encoder_pulses <= -ENCODER_RESOLUTION) { // direction is arbitrary here, but this clockwise + encoder_update_kb(index, ENCODER_COUNTER_CLOCKWISE); + } + encoder_pulses %= ENCODER_RESOLUTION; +} + +/** + * Read the secondary encoder over i2c + */ +void secondary_encoder_read(void) { + uint8_t state; + if (encoder_read_state(&state)) { + encoder_state <<= 2; + encoder_state |= state; + encoder_update(1, encoder_state); + } +} + +/** + * Initialize the secondary encoder over i2c + */ +void secondary_encoder_init(void) { encoder_read_state(&encoder_state); } diff --git a/keyboards/torn/torn_oled.c b/keyboards/torn/torn_oled.c new file mode 100644 index 000000000000..834abf96ceb1 --- /dev/null +++ b/keyboards/torn/torn_oled.c @@ -0,0 +1,63 @@ +/* + * Copyright 2020 Richard Titmuss + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +#ifdef OLED_DRIVER_ENABLE + +// clang-format off +__attribute__((weak)) +void oled_task_user(void) { + static const char PROGMEM torn_logo[] = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xf8, 0x98, 0x98, 0x98, 0x98, 0x98, 0x18, 0x18, 0x98, + 0x98, 0x98, 0x98, 0x98, 0xf8, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x80, 0xc0, 0x60, 0x30, 0x30, 0x18, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, + 0x18, 0x30, 0x30, 0x60, 0xc0, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xf8, 0xf8, 0x18, 0x18, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x18, 0x38, + 0x70, 0xe0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xf8, 0xf8, 0x38, 0x70, 0xe0, 0xc0, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xf8, 0xf8, 0x18, 0x18, 0xf8, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0xff, 0xff, 0x00, 0x00, 0xff, + 0xff, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xf8, 0xfe, 0x07, 0x01, 0xf0, 0xfc, 0x0e, 0x03, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x03, 0x03, 0x0e, 0xfc, 0xf0, 0x01, 0x07, 0xfe, 0xfc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0xff, 0xff, 0xc1, 0xc1, 0xc1, 0x63, 0x3f, 0x1c, + 0xc0, 0xe1, 0x7f, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xff, 0xff, 0x00, 0x00, 0xf8, 0xf1, 0xe3, 0xc7, 0x8e, 0x1c, 0x38, 0x70, 0xe0, 0xc0, 0x80, 0x00, + 0xff, 0xff, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0xff, + 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x0f, 0x3f, 0x70, 0xc0, 0x87, 0x1f, 0x38, 0x60, 0x60, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, + 0x60, 0x60, 0x38, 0x1f, 0x87, 0xc0, 0xf0, 0x7f, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0xfe, 0xfe, 0x0e, 0x3c, 0x78, 0xe2, 0xc7, 0x1f, + 0x39, 0xe0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xff, 0xff, 0x00, 0x00, 0xff, 0xff, 0x00, 0x01, 0x03, 0x07, 0x0e, 0x1c, 0x38, 0x71, 0xe3, 0xc7, + 0x8f, 0x1f, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0x0f, 0x0c, 0x0c, 0x0f, + 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x06, 0x06, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, + 0x0c, 0x06, 0x06, 0x03, 0x03, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x0f, 0x0f, 0x0c, 0x0c, 0x0f, 0x0f, 0x00, 0x00, 0x00, 0x01, 0x07, 0x0f, + 0x0c, 0x0c, 0x0f, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x0f, 0x0f, 0x0c, 0x0c, 0x0f, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, + 0x03, 0x07, 0x0e, 0x0c, 0x0f, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + }; + + oled_write_raw_P(torn_logo, sizeof(torn_logo)); +} +// clang-format on + +#endif diff --git a/keyboards/treadstone48/rev2/info.json b/keyboards/treadstone48/rev2/info.json index 1771a6a9d145..991a83019960 100644 --- a/keyboards/treadstone48/rev2/info.json +++ b/keyboards/treadstone48/rev2/info.json @@ -191,11 +191,6 @@ "x": 12.75, "y": 2 }, - { - "label": "Shift", - "x": 13.75, - "y": 2 - }, { "label": "Ctrl", "x": 0.75, @@ -256,6 +251,11 @@ "label": "\u2192", "x": 13.75, "y": 3 + }, + { + "label": "Shift", + "x": 13.75, + "y": 2 } ] } diff --git a/keyboards/wsk/sl40/readme.md b/keyboards/wsk/sl40/readme.md index 5c74b7c2d416..113a09af54d7 100644 --- a/keyboards/wsk/sl40/readme.md +++ b/keyboards/wsk/sl40/readme.md @@ -1,6 +1,6 @@ # SL40 -![SL40](https://i.imgur.com/HeeUwVj.png) +![SL40](https://i.imgur.com/DX5Znfd.png) The SL40 is a 14 column staggered 40% keyboard. diff --git a/keyboards/xd60/info.json b/keyboards/xd60/info.json index c69e8a78872f..dbe9a79880a8 100644 --- a/keyboards/xd60/info.json +++ b/keyboards/xd60/info.json @@ -1,8 +1,8 @@ { - "keyboard_name": "XD60", - "maintainer": "qmk", - "width": 15, - "height": 5, + "keyboard_name": "XD60", + "maintainer": "qmk", + "width": 15, + "height": 5, "layouts": { "LAYOUT_all": { "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25}, {"label":"Shift", "x":0, "y":3}, {"x":1, "y":3}, {"label":"Z", "x":2, "y":3}, {"label":"X", "x":3, "y":3}, {"label":"C", "x":4, "y":3}, {"label":"V", "x":5, "y":3}, {"label":"B", "x":6, "y":3}, {"label":"N", "x":7, "y":3}, {"label":"M", "x":8, "y":3}, {"label":"<", "x":9, "y":3}, {"label":">", "x":10, "y":3}, {"label":"?", "x":11, "y":3}, {"label":"Shift", "x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4}, {"label":"Win", "x":11, "y":4}, {"label":"Menu", "x":12, "y":4}, {"label":"Ctrl", "x":13, "y":4}, {"x":14, "y":4}] @@ -12,8 +12,153 @@ "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] }, + "LAYOUT_60_ansi_split_bs_rshift": { + "layout": [ + {"label":"~", "x":0, "y":0}, + {"label":"!", "x":1, "y":0}, + {"label":"@", "x":2, "y":0}, + {"label":"#", "x":3, "y":0}, + {"label":"$", "x":4, "y":0}, + {"label":"%", "x":5, "y":0}, + {"label":"^", "x":6, "y":0}, + {"label":"&", "x":7, "y":0}, + {"label":"*", "x":8, "y":0}, + {"label":"(", "x":9, "y":0}, + {"label":")", "x":10, "y":0}, + {"label":"_", "x":11, "y":0}, + {"label":"+", "x":12, "y":0}, + {"label":"BS", "x":13, "y":0, "w":1}, + {"label":"BS", "x":14, "y":0, "w":1}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"{", "x":11.5, "y":1}, + {"label":"}", "x":12.5, "y":1}, + {"label":"|", "x":13.5, "y":1, "w":1.5}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":":", "x":10.75, "y":2}, + {"label":"\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":"<", "x":9.25, "y":3}, + {"label":">", "x":10.25, "y":3}, + {"label":"?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"FN", "x":14, "y":3, "w":1}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Win", "x":11.25, "y":4, "w":1.25}, + {"label":"Menu", "x":12.5, "y":4, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":4, "w":1.25} + ] + }, + "LAYOUT_60_iso": { "layout": [{"label":"\u00ac", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"GUI", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"label":"Space", "x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"GUI", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] + }, + + "LAYOUT_60_iso_split_bs_rshift": { + "layout": [ + {"label":"\u00ac", "x":0, "y":0}, + {"label":"!", "x":1, "y":0}, + {"label":"\"", "x":2, "y":0}, + {"label":"\u00a3", "x":3, "y":0}, + {"label":"$", "x":4, "y":0}, + {"label":"%", "x":5, "y":0}, + {"label":"^", "x":6, "y":0}, + {"label":"&", "x":7, "y":0}, + {"label":"*", "x":8, "y":0}, + {"label":"(", "x":9, "y":0}, + {"label":")", "x":10, "y":0}, + {"label":"_", "x":11, "y":0}, + {"label":"+", "x":12, "y":0}, + {"label":"BS", "x":13, "y":0, "w":1}, + {"label":"BS", "x":14, "y":0, "w":1}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"{", "x":11.5, "y":1}, + {"label":"}", "x":12.5, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":":", "x":10.75, "y":2}, + {"label":"@", "x":11.75, "y":2}, + {"label":"~", "x":12.75, "y":2}, + {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, + + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"|", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":"<", "x":9.25, "y":3}, + {"label":">", "x":10.25, "y":3}, + {"label":"?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"FN", "x":14, "y":3, "w":1}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"GUI", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"AltGr", "x":10, "y":4, "w":1.25}, + {"label":"GUI", "x":11.25, "y":4, "w":1.25}, + {"label":"Menu", "x":12.5, "y":4, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":4, "w":1.25} + ] } } } diff --git a/keyboards/xd60/rev2/rules.mk b/keyboards/xd60/rev2/rules.mk index 1c96804e77aa..56a01b3c52e0 100644 --- a/keyboards/xd60/rev2/rules.mk +++ b/keyboards/xd60/rev2/rules.mk @@ -23,7 +23,7 @@ MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -LAYOUTS = 60_ansi 60_iso +LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_iso_split_bs_rshift diff --git a/keyboards/xd60/rev3/rules.mk b/keyboards/xd60/rev3/rules.mk index 3c7c967124bf..56a01b3c52e0 100644 --- a/keyboards/xd60/rev3/rules.mk +++ b/keyboards/xd60/rev3/rules.mk @@ -26,4 +26,4 @@ BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -LAYOUTS = 60_ansi 60_iso +LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_iso_split_bs_rshift diff --git a/keyboards/xd60/xd60.h b/keyboards/xd60/xd60.h index 3946138c3810..dc6a1080f9a2 100644 --- a/keyboards/xd60/xd60.h +++ b/keyboards/xd60/xd60.h @@ -46,6 +46,20 @@ inline void xd60_bl_led_off(void) { DDRF &= ~(1<<5); PORTF &= ~(1<<5); } { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D } \ } +#define LAYOUT_60_ansi_split_bs_rshift( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3C, \ + K40, K41, K42, K45, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ + { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, K4C, K4D } \ +} + #define LAYOUT_60_iso( \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, \ @@ -59,3 +73,17 @@ inline void xd60_bl_led_off(void) { DDRF &= ~(1<<5); PORTF &= ~(1<<5); } { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D }, \ { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D } \ } + +#define LAYOUT_60_iso_split_bs_rshift( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3C, \ + K40, K41, K42, K45, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, KC_NO }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ + { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, K4C, K4D } \ +} diff --git a/keyboards/yd60mq/config.h b/keyboards/yd60mq/config.h index 26c39a5b0280..54aed0c96870 100644 --- a/keyboards/yd60mq/config.h +++ b/keyboards/yd60mq/config.h @@ -3,8 +3,8 @@ #include "config_common.h" /* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 +#define VENDOR_ID 0x594D // "YM" +#define PRODUCT_ID 0x604D // 60 "M" #define MANUFACTURER YMDK #define PRODUCT YD60MQ #define DESCRIPTION Keyboard diff --git a/keyboards/yd60mq/keymaps/via/keymap.c b/keyboards/yd60mq/keymaps/via/keymap.c new file mode 100644 index 000000000000..ab503ee277ee --- /dev/null +++ b/keyboards/yd60mq/keymaps/via/keymap.c @@ -0,0 +1,53 @@ +/* Copyright 2020 rbange https://github.com/rbange + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL, + KC_LCTL, KC_LGUI, KC_LALT, MO(1), KC_SPC, MO(1), KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_all( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, + KC_TRNS, RGB_TOG, KC_UP, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_TOGG, BL_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; diff --git a/keyboards/yd60mq/keymaps/via/rules.mk b/keyboards/yd60mq/keymaps/via/rules.mk new file mode 100644 index 000000000000..36b7ba9cbc98 --- /dev/null +++ b/keyboards/yd60mq/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/yd60mq/rules.mk b/keyboards/yd60mq/rules.mk index 3e4d8eaa0f5d..615e4865a9da 100644 --- a/keyboards/yd60mq/rules.mk +++ b/keyboards/yd60mq/rules.mk @@ -14,7 +14,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ymd75/info.json b/keyboards/ymd75/info.json index a0610afa3f62..64412dd2fcc2 100644 --- a/keyboards/ymd75/info.json +++ b/keyboards/ymd75/info.json @@ -7,6 +7,183 @@ "layouts": { "LAYOUT": { "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Del", "x":14, "y":0}, {"label":"Fn", "x":15, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"label":"Backspace", "x":13, "y":1, "w":2}, {"label":"Home", "x":15, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"End", "x":15, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"Page Up", "x":15, "y":3}, {"label":"Shift", "x":0, "y":4, "w":2.25}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"\u2191", "x":14, "y":4}, {"label":"Page Down", "x":15, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"GUI", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5}, {"label":"Fn", "x":11, "y":5}, {"label":"Ctrl", "x":12, "y":5}, {"label":"\u2190", "x":13, "y":5}, {"label":"\u2193", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}] + }, + "LAYOUT_75_iso": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":1, "y":0}, + {"label":"F2", "x":2, "y":0}, + {"label":"F3", "x":3, "y":0}, + {"label":"F4", "x":4, "y":0}, + {"label":"F5", "x":5, "y":0}, + {"label":"F6", "x":6, "y":0}, + {"label":"F7", "x":7, "y":0}, + {"label":"F8", "x":8, "y":0}, + {"label":"F9", "x":9, "y":0}, + {"label":"F10", "x":10, "y":0}, + {"label":"F11", "x":11, "y":0}, + {"label":"F12", "x":12, "y":0}, + {"label":"PrtSc", "x":13, "y":0}, + {"label":"Pause", "x":14, "y":0}, + {"label":"Delete", "x":15, "y":0}, + {"label":"~", "x":0, "y":1}, + {"label":"1", "x":1, "y":1}, + {"label":"2", "x":2, "y":1}, + {"label":"3", "x":3, "y":1}, + {"label":"4", "x":4, "y":1}, + {"label":"5", "x":5, "y":1}, + {"label":"6", "x":6, "y":1}, + {"label":"7", "x":7, "y":1}, + {"label":"8", "x":8, "y":1}, + {"label":"9", "x":9, "y":1}, + {"label":"0", "x":10, "y":1}, + {"label":"_", "x":11, "y":1}, + {"label":"+", "x":12, "y":1}, + {"label":"Backspace", "x":13, "y":1, "w":2}, + {"label":"Home", "x":15, "y":1}, + {"label":"Tab", "x":0, "y":2, "w":1.5}, + {"label":"Q", "x":1.5, "y":2}, + {"label":"W", "x":2.5, "y":2}, + {"label":"E", "x":3.5, "y":2}, + {"label":"R", "x":4.5, "y":2}, + {"label":"T", "x":5.5, "y":2}, + {"label":"Y", "x":6.5, "y":2}, + {"label":"U", "x":7.5, "y":2}, + {"label":"I", "x":8.5, "y":2}, + {"label":"O", "x":9.5, "y":2}, + {"label":"P", "x":10.5, "y":2}, + {"label":"{", "x":11.5, "y":2}, + {"label":"}", "x":12.5, "y":2}, + {"label":"Page Up", "x":15, "y":2}, + {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, + {"label":"A", "x":1.75, "y":3}, + {"label":"S", "x":2.75, "y":3}, + {"label":"D", "x":3.75, "y":3}, + {"label":"F", "x":4.75, "y":3}, + {"label":"G", "x":5.75, "y":3}, + {"label":"H", "x":6.75, "y":3}, + {"label":"J", "x":7.75, "y":3}, + {"label":"K", "x":8.75, "y":3}, + {"label":"L", "x":9.75, "y":3}, + {"label":":", "x":10.75, "y":3}, + {"label":"@", "x":11.75, "y":3}, + {"label":"~", "x":12.75, "y":3}, + {"label":"Enter", "x":13.75, "y":2, "w":1.25, "h":2}, + {"label":"Page Down", "x":15, "y":3}, + {"label":"Shift", "x":0, "y":4, "w":1.25}, + {"label":"|", "x":1.25, "y":4}, + {"label":"Z", "x":2.25, "y":4}, + {"label":"X", "x":3.25, "y":4}, + {"label":"C", "x":4.25, "y":4}, + {"label":"V", "x":5.25, "y":4}, + {"label":"B", "x":6.25, "y":4}, + {"label":"N", "x":7.25, "y":4}, + {"label":"M", "x":8.25, "y":4}, + {"label":"<", "x":9.25, "y":4}, + {"label":">", "x":10.25, "y":4}, + {"label":"?", "x":11.25, "y":4}, + {"label":"Shift", "x":12.25, "y":4, "w":1.75}, + {"label":"Up", "x":14, "y":4}, + {"label":"End", "x":15, "y":4}, + {"label":"Ctrl", "x":0, "y":5, "w":1.25}, + {"label":"Win", "x":1.25, "y":5, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5, "w":1.25}, + {"label":"Space", "x":3.75, "y":5, "w":6.25}, + {"label":"AltGr", "x":10, "y":5}, + {"label":"Menu", "x":11, "y":5}, + {"label":"Ctrl", "x":12, "y":5}, + {"label":"Left", "x":13, "y":5}, + {"label":"Down", "x":14, "y":5}, + {"label":"Right", "x":15, "y":5} + ] + }, + "LAYOUT_75_iso_rwkl": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":1, "y":0}, + {"label":"F2", "x":2, "y":0}, + {"label":"F3", "x":3, "y":0}, + {"label":"F4", "x":4, "y":0}, + {"label":"F5", "x":5, "y":0}, + {"label":"F6", "x":6, "y":0}, + {"label":"F7", "x":7, "y":0}, + {"label":"F8", "x":8, "y":0}, + {"label":"F9", "x":9, "y":0}, + {"label":"F10", "x":10, "y":0}, + {"label":"F11", "x":11, "y":0}, + {"label":"F12", "x":12, "y":0}, + {"label":"PrtSc", "x":13, "y":0}, + {"label":"Pause", "x":14, "y":0}, + {"label":"Delete", "x":15, "y":0}, + {"label":"~", "x":0, "y":1}, + {"label":"1", "x":1, "y":1}, + {"label":"2", "x":2, "y":1}, + {"label":"3", "x":3, "y":1}, + {"label":"4", "x":4, "y":1}, + {"label":"5", "x":5, "y":1}, + {"label":"6", "x":6, "y":1}, + {"label":"7", "x":7, "y":1}, + {"label":"8", "x":8, "y":1}, + {"label":"9", "x":9, "y":1}, + {"label":"0", "x":10, "y":1}, + {"label":"_", "x":11, "y":1}, + {"label":"+", "x":12, "y":1}, + {"label":"Backspace", "x":13, "y":1, "w":2}, + {"label":"Home", "x":15, "y":1}, + {"label":"Tab", "x":0, "y":2, "w":1.5}, + {"label":"Q", "x":1.5, "y":2}, + {"label":"W", "x":2.5, "y":2}, + {"label":"E", "x":3.5, "y":2}, + {"label":"R", "x":4.5, "y":2}, + {"label":"T", "x":5.5, "y":2}, + {"label":"Y", "x":6.5, "y":2}, + {"label":"U", "x":7.5, "y":2}, + {"label":"I", "x":8.5, "y":2}, + {"label":"O", "x":9.5, "y":2}, + {"label":"P", "x":10.5, "y":2}, + {"label":"{", "x":11.5, "y":2}, + {"label":"}", "x":12.5, "y":2}, + {"label":"Page Up", "x":15, "y":2}, + {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, + {"label":"A", "x":1.75, "y":3}, + {"label":"S", "x":2.75, "y":3}, + {"label":"D", "x":3.75, "y":3}, + {"label":"F", "x":4.75, "y":3}, + {"label":"G", "x":5.75, "y":3}, + {"label":"H", "x":6.75, "y":3}, + {"label":"J", "x":7.75, "y":3}, + {"label":"K", "x":8.75, "y":3}, + {"label":"L", "x":9.75, "y":3}, + {"label":":", "x":10.75, "y":3}, + {"label":"@", "x":11.75, "y":3}, + {"label":"~", "x":12.75, "y":3}, + {"label":"Enter", "x":13.75, "y":2, "w":1.25, "h":2}, + {"label":"Page Down", "x":15, "y":3}, + {"label":"Shift", "x":0, "y":4, "w":1.25}, + {"label":"|", "x":1.25, "y":4}, + {"label":"Z", "x":2.25, "y":4}, + {"label":"X", "x":3.25, "y":4}, + {"label":"C", "x":4.25, "y":4}, + {"label":"V", "x":5.25, "y":4}, + {"label":"B", "x":6.25, "y":4}, + {"label":"N", "x":7.25, "y":4}, + {"label":"M", "x":8.25, "y":4}, + {"label":"<", "x":9.25, "y":4}, + {"label":">", "x":10.25, "y":4}, + {"label":"?", "x":11.25, "y":4}, + {"label":"Shift", "x":12.25, "y":4, "w":1.75}, + {"label":"Up", "x":14, "y":4}, + {"label":"End", "x":15, "y":4}, + {"label":"Ctrl", "x":0, "y":5, "w":1.25}, + {"label":"Win", "x":1.25, "y":5, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5, "w":1.25}, + {"label":"Space", "x":3.75, "y":5, "w":6.25}, + {"label":"AltGr", "x":10, "y":5, "w":1.5}, + {"label":"Ctrl", "x":11.5, "y":5, "w":1.5}, + {"label":"Left", "x":13, "y":5}, + {"label":"Down", "x":14, "y":5}, + {"label":"Right", "x":15, "y":5} + ] } } } diff --git a/keyboards/ymd75/keymaps/default_iso/keymap.c b/keyboards/ymd75/keymaps/default_iso/keymap.c new file mode 100644 index 000000000000..86af81e22016 --- /dev/null +++ b/keyboards/ymd75/keymaps/default_iso/keymap.c @@ -0,0 +1,36 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_75_iso( + /* ┌─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┐ */ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_PAUS, KC_DEL, + /* ├─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┴─────────┼─────────┤ */ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, + /* ├─────────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬──────────────┼─────────┤ */ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_END, + /* ├──────────────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬ ├─────────┤ */ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGUP, + /* ├───────────┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴─────────┴─┬─────────┼─────────┤ */ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + /* ├───────────┼─────────┴─┬───────┴───┬─────┴─────────┴─────────┴─────────┴─────────┴─────────┴───────┬─┴───────┬─┴───────┬─┴───────┬─────────┼─────────┼─────────┤ */ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + /* └───────────┴───────────┴───────────┴───────────────────────────────────────────────────────────────┴─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘ */ + ), + + [1] = LAYOUT_75_iso( + /* ┌─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┐ */ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MPRV, KC_MNXT, + /* ├─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┴─────────┼─────────┤ */ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, + /* ├─────────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬──────────────┼─────────┤ */ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, + /* ├──────────────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬ ├─────────┤ */ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + /* ├───────────┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴─────────┴─┬─────────┼─────────┤ */ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + /* ├───────────┼─────────┴─┬───────┴───┬─────┴─────────┴─────────┴─────────┴─────────┴─────────┴───────┬─┴───────┬─┴───────┬─┴───────┬─────────┼─────────┼─────────┤ */ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + /* └───────────┴───────────┴───────────┴───────────────────────────────────────────────────────────────┴─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘ */ + ) +}; diff --git a/keyboards/ymd75/keymaps/default_iso_rwkl/keymap.c b/keyboards/ymd75/keymaps/default_iso_rwkl/keymap.c new file mode 100644 index 000000000000..0db1c8d288d3 --- /dev/null +++ b/keyboards/ymd75/keymaps/default_iso_rwkl/keymap.c @@ -0,0 +1,36 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_75_iso_rwkl( + /* ┌─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┐ */ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_DEL, KC_HOME, + /* ├─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┴─────────┼─────────┤ */ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_END, + /* ├─────────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬──────────────┼─────────┤ */ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_PGUP, + /* ├──────────────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬ ├─────────┤ */ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGDN, + /* ├───────────┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴─────────┴─┬─────────┼─────────┤ */ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1), + /* ├───────────┼─────────┴─┬───────┴───┬─────┴─────────┴─────────┴─────────┴─────────┴─────────┴───────┬─┴─────────┴──┬──────┴───────┬─────────┼─────────┼─────────┤ */ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + /* └───────────┴───────────┴───────────┴───────────────────────────────────────────────────────────────┴──────────────┴──────────────┴─────────┴─────────┴─────────┘ */ + ), + + [1] = LAYOUT_75_iso_rwkl( + /* ┌─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┐ */ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MPRV, KC_MNXT, + /* ├─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┴─────────┼─────────┤ */ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + /* ├─────────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬──────────────┼─────────┤ */ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, + /* ├──────────────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬ ├─────────┤ */ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, + /* ├───────────┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴─────────┴─┬─────────┼─────────┤ */ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + /* ├───────────┼─────────┴─┬───────┴───┬─────┴─────────┴─────────┴─────────┴─────────┴─────────┴───────┬─┴─────────┴──┬──────┴───────┬─────────┼─────────┼─────────┤ */ + _______, _______, _______, _______, _______, _______, _______, _______, _______ + /* └───────────┴───────────┴───────────┴───────────────────────────────────────────────────────────────┴──────────────┴──────────────┴─────────┴─────────┴─────────┘ */ + ) +}; diff --git a/keyboards/ymd75/rev1/rev1.h b/keyboards/ymd75/rev1/rev1.h index 0a426ffa5718..d88e8fb802a0 100644 --- a/keyboards/ymd75/rev1/rev1.h +++ b/keyboards/ymd75/rev1/rev1.h @@ -21,19 +21,55 @@ along with this program. If not, see . #include "quantum.h" #define LAYOUT( \ -K05, K25, K35, K45, K55, K06, KA6, KA7, K07, KB5, KC5, KD5, KE5, KD1, KE1, KE2, \ -K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4, KD0, \ -K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, KD3, K67, \ -K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2, KD2, KE0, \ -K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1, K86, K77, \ -K00, K10, K20, K56, K57, KB0, KC0, K96, K76, K66 \ + K05, K25, K35, K45, K55, K06, KA6, KA7, K07, KB5, KC5, KD5, KE5, KD1, KE1, KE2, \ + K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4, KD0, \ + K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, KD3, K67, \ + K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2, KD2, KE0, \ + K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1, K86, K77, \ + K00, K10, K20, K56, K57, KB0, KC0, K96, K76, K66 \ ){ \ -{ K00, K10, K20, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB0, KC0, KD0, KC_NO }, \ -{ K01, K11, K21, K31, K41, K51, KC_NO, KC_NO, KC_NO, KC_NO, KA1, KB1, KC_NO, KD1, KE1 }, \ -{ K02, K12, K22, K32, K42, K52, KC_NO, KC_NO, KC_NO, KC_NO, KA2, KB2, KC_NO, KD2, KE2 }, \ -{ K03, K13, K23, K33, K43, K53, KC_NO, KC_NO, KC_NO, KC_NO, KA3, KB3, KC3, KD3, KC_NO }, \ -{ K04, K14, K24, K34, K44, K54, KC_NO, KC_NO, KC_NO, KC_NO, KA4, KB4, KC4, KC_NO, KE4 }, \ -{ K05, KC_NO, K25, K35, K45, K55, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB5, KC5, KD5, KE5 }, \ -{ K06, K16, K26, K36, K46, K56, K66, K76, K86, K96, KA6, KB6, KC6, KD6, KE6 }, \ -{ K07, K17, K27, K37, K47, K57, K67, K77, KE0, KC_NO, KA7, KB7, KC7, KD7, KE7 } \ + { K00, K10, K20, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB0, KC0, KD0, KC_NO }, \ + { K01, K11, K21, K31, K41, K51, KC_NO, KC_NO, KC_NO, KC_NO, KA1, KB1, KC_NO, KD1, KE1 }, \ + { K02, K12, K22, K32, K42, K52, KC_NO, KC_NO, KC_NO, KC_NO, KA2, KB2, KC_NO, KD2, KE2 }, \ + { K03, K13, K23, K33, K43, K53, KC_NO, KC_NO, KC_NO, KC_NO, KA3, KB3, KC3, KD3, KC_NO }, \ + { K04, K14, K24, K34, K44, K54, KC_NO, KC_NO, KC_NO, KC_NO, KA4, KB4, KC4, KC_NO, KE4 }, \ + { K05, KC_NO, K25, K35, K45, K55, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB5, KC5, KD5, KE5 }, \ + { K06, K16, K26, K36, K46, K56, K66, K76, K86, K96, KA6, KB6, KC6, KD6, KE6 }, \ + { K07, K17, K27, K37, K47, K57, K67, K77, KE0, KC_NO, KA7, KB7, KC7, KD7, KE7 } \ +} + +#define LAYOUT_75_iso( \ + K50, K52, K53, K54, K55, K60, K6A, K7A, K70, K5B, K5C, K5D, K5E, K1D, K1E, K2E, \ + K40, K41, K42, K43, K44, K45, K61, K6B, K7B, K71, K4A, K4B, K4C, K4E, K0D, \ + K30, K31, K32, K33, K34, K35, K62, K6C, K7C, K72, K3A, K3B, K3C, K76, \ + K20, K21, K22, K23, K24, K25, K63, K6D, K7D, K73, K2A, K2B, K2C, K2D, K0E, \ + K10, K03, K11, K12, K13, K14, K15, K64, K6E, K7E, K74, K1A, K1B, K68, K77, \ + K00, K01, K02, K65, K75, K0B, K0C, K69, K67, K66 \ +){ \ + { K00, K01, K02, K03, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K0B, K0C, K0D, KC_NO }, \ + { K10, K11, K12, K13, K14, K15, KC_NO, KC_NO, KC_NO, KC_NO, K1A, K1B, KC_NO, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, KC_NO, KC_NO, KC_NO, KC_NO, K2A, K2B, K2C, K2D, K2E }, \ + { K30, K31, K32, K33, K34, K35, KC_NO, KC_NO, KC_NO, KC_NO, K3A, K3B, K3C, KC_NO, KC_NO }, \ + { K40, K41, K42, K43, K44, K45, KC_NO, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, KC_NO, K4E }, \ + { K50, KC_NO, K52, K53, K54, K55, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K5B, K5C, K5D, K5E }, \ + { K60, K61, K62, K63, K64, K65, K66, K67, K68, K69, K6A, K6B, K6C, K6D, K6E }, \ + { K70, K71, K72, K73, K74, K75, K76, K77, K0E, KC_NO, K7A, K7B, K7C, K7D, K7E } \ +} + +#define LAYOUT_75_iso_rwkl( \ + K50, K52, K53, K54, K55, K60, K6A, K7A, K70, K5B, K5C, K5D, K5E, K1D, K1E, K2E, \ + K40, K41, K42, K43, K44, K45, K61, K6B, K7B, K71, K4A, K4B, K4C, K4E, K0D, \ + K30, K31, K32, K33, K34, K35, K62, K6C, K7C, K72, K3A, K3B, K3C, K76, \ + K20, K21, K22, K23, K24, K25, K63, K6D, K7D, K73, K2A, K2B, K2C, K2D, K0E, \ + K10, K03, K11, K12, K13, K14, K15, K64, K6E, K7E, K74, K1A, K1B, K68, K77, \ + K00, K01, K02, K65, K75, K0C, K69, K67, K66 \ +){ \ + { K00, K01, K02, K03, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K0C, K0D, KC_NO }, \ + { K10, K11, K12, K13, K14, K15, KC_NO, KC_NO, KC_NO, KC_NO, K1A, K1B, KC_NO, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, KC_NO, KC_NO, KC_NO, KC_NO, K2A, K2B, K2C, K2D, K2E }, \ + { K30, K31, K32, K33, K34, K35, KC_NO, KC_NO, KC_NO, KC_NO, K3A, K3B, K3C, KC_NO, KC_NO }, \ + { K40, K41, K42, K43, K44, K45, KC_NO, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, KC_NO, K4E }, \ + { K50, KC_NO, K52, K53, K54, K55, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K5B, K5C, K5D, K5E }, \ + { K60, K61, K62, K63, K64, K65, K66, K67, K68, K69, K6A, K6B, K6C, K6D, K6E }, \ + { K70, K71, K72, K73, K74, K75, K76, K77, K0E, KC_NO, K7A, K7B, K7C, K7D, K7E } \ } diff --git a/keyboards/ymd75/rev2/rev2.h b/keyboards/ymd75/rev2/rev2.h index b2dd7b8e1cd4..85e07c57669b 100644 --- a/keyboards/ymd75/rev2/rev2.h +++ b/keyboards/ymd75/rev2/rev2.h @@ -16,3 +16,35 @@ { K400, KC_NO, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414 }, \ { K500, K501, K502, KC_NO, KC_NO, K505, K506, K507, K508, K509, K510, K511, KC_NO, K513, K514 } \ } + +#define LAYOUT_75_iso( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K514, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K114, K513, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \ + K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, \ + K500, K501, K502, K505, K506, K507, K508, K509, K510, K511 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO, K114 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, KC_NO, K214 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ + { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414 }, \ + { K500, K501, K502, KC_NO, KC_NO, K505, K506, K507, K508, K509, K510, K511, KC_NO, K513, K514 } \ +} + +#define LAYOUT_75_iso_rwkl( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K514, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K114, K513, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \ + K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, \ + K500, K501, K502, K505, K506, K508, K509, K510, K511 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO, K114 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, KC_NO, K214 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ + { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414 }, \ + { K500, K501, K502, KC_NO, KC_NO, K505, K506, KC_NO, K508, K509, K510, K511, KC_NO, K513, K514 } \ +} diff --git a/keyboards/yosino58/ssd1306.c b/keyboards/yosino58/ssd1306.c index ff6ba210d1fb..abd9de2f7a08 100644 --- a/keyboards/yosino58/ssd1306.c +++ b/keyboards/yosino58/ssd1306.c @@ -10,6 +10,8 @@ #include "sendchar.h" #include "timer.h" +struct CharacterMatrix display; + extern const unsigned char font[] PROGMEM; // Set this to 1 to help diagnose early startup problems diff --git a/keyboards/yosino58/ssd1306.h b/keyboards/yosino58/ssd1306.h index acaf6217ef05..35e4c144cc7b 100644 --- a/keyboards/yosino58/ssd1306.h +++ b/keyboards/yosino58/ssd1306.h @@ -70,7 +70,7 @@ struct CharacterMatrix { bool dirty; }; -struct CharacterMatrix display; +extern struct CharacterMatrix display; bool iota_gfx_init(bool rotate); void iota_gfx_task(void); diff --git a/keyboards/yushakobo/quick7/keymaps/via/keymap.c b/keyboards/yushakobo/quick7/keymaps/via/keymap.c new file mode 100644 index 000000000000..9c64042bc5d6 --- /dev/null +++ b/keyboards/yushakobo/quick7/keymaps/via/keymap.c @@ -0,0 +1,84 @@ +/* Copyright 2020 yushakobo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FUNC1, + _VIA1, + _VIA2 +}; + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + YUSHAURL = SAFE_RANGE +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT( + KC_MUTE, MO(_FUNC1), RGB_MOD, + S(KC_TAB), KC_UP, KC_TAB, + KC_LEFT, KC_DOWN, KC_RGHT + ), + [_FUNC1] = LAYOUT( + RESET, KC_TRNS, RGB_TOG, + KC_HOME, KC_VOLU, KC_END, + KC_MPRV, KC_VOLD, KC_MNXT + ), + [_VIA1] = LAYOUT( + YUSHAURL,XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX + ), + [_VIA2] = LAYOUT( + XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX + ) +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case YUSHAURL: + if (record->event.pressed) { + // when keycode QMKURL is pressed + SEND_STRING("https://yushakobo.jp/\n"); + } else { + // when keycode QMKURL is released + } + break; + } + return true; +} + +void encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { // Left encoder + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } + else if (index == 1) { // Right encoder + if (clockwise) { + rgblight_decrease_hue_noeeprom(); + } else { + rgblight_increase_hue_noeeprom(); + } + } +} diff --git a/keyboards/yushakobo/quick7/keymaps/via/readme.md b/keyboards/yushakobo/quick7/keymaps/via/readme.md new file mode 100644 index 000000000000..ff0978780e12 --- /dev/null +++ b/keyboards/yushakobo/quick7/keymaps/via/readme.md @@ -0,0 +1,27 @@ +# The default VIA keymap for quick7 + +#### Rotary Encoder is not configurable through VIA + +### Base Layer +``` +Left Encoder(CW: Vol+, CCW: Vol-) +Right Encoder(CW: RGB HUE-, CCW: RGB HUE+) +,----------- --------- ------------, +| MUTE | Func1 | RGB MODE | + ----------- --------- ------------ +| Shift+Tab | UP | TAB | + ----------- --------- ------------ +| LEFT | DOWN | RIGHT | +`----------- --------- ------------' +``` + +### Func1 Layer +``` +,----------- --------- ------------, +| RESET | Func1 | RGB TOGGLE | + ----------- --------- ------------ +| HOME | VOL+ | END | + ----------- --------- ------------ +| MEDIA << | VOL- | MEDIA >> | +`----------- --------- ------------' +``` \ No newline at end of file diff --git a/keyboards/yushakobo/quick7/keymaps/via/rules.mk b/keyboards/yushakobo/quick7/keymaps/via/rules.mk new file mode 100644 index 000000000000..036bd6d1c3ec --- /dev/null +++ b/keyboards/yushakobo/quick7/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes \ No newline at end of file diff --git a/keyboards/zvecr/zv48/f401/rules.mk b/keyboards/zvecr/zv48/f401/rules.mk index e41d5ef7a2ea..950442af96fb 100644 --- a/keyboards/zvecr/zv48/f401/rules.mk +++ b/keyboards/zvecr/zv48/f401/rules.mk @@ -1,27 +1,5 @@ -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F4xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F401xC -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f4xx -# it should exist either in /os/hal/boards/ -# or /boards -BOARD = BLACKPILL_STM32_F401 -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m4 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -USE_FPU = yes -# Address of the booloader in system memory -STM32_BOOTLOADER_ADDRESS = 0x1FFF0000 +# MCU name +MCU = STM32F401 -# Options to pass to dfu-util when flashing -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -v 0483 -p df11 +# Address of the bootloader in system memory +STM32_BOOTLOADER_ADDRESS = 0x1FFF0000 diff --git a/keyboards/zvecr/zv48/f411/rules.mk b/keyboards/zvecr/zv48/f411/rules.mk index 61add3aed53b..4f7f52e62bf9 100644 --- a/keyboards/zvecr/zv48/f411/rules.mk +++ b/keyboards/zvecr/zv48/f411/rules.mk @@ -1,27 +1,5 @@ -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F4xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F411xE -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f4xx -# it should exist either in /os/hal/boards/ -# or /boards -BOARD = BLACKPILL_STM32_F411 -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m4 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -USE_FPU = yes -# Address of the booloader in system memory -STM32_BOOTLOADER_ADDRESS = 0x1FFF0000 +# MCU name +MCU = STM32F411 -# Options to pass to dfu-util when flashing -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -v 0483 -p df11 +# Address of the bootloader in system memory +STM32_BOOTLOADER_ADDRESS = 0x1FFF0000 diff --git a/layouts/community/60_ansi_arrow/mrsendyyk/keymap.c b/layouts/community/60_ansi_arrow/mrsendyyk/keymap.c index 4b0b33e2c880..80d03922b9a7 100644 --- a/layouts/community/60_ansi_arrow/mrsendyyk/keymap.c +++ b/layouts/community/60_ansi_arrow/mrsendyyk/keymap.c @@ -1,115 +1,98 @@ +/* Copyright (C) 2020 Sendy YK (https://mr.sendyyk.com). + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + #include QMK_KEYBOARD_H -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* - * Default Layer [0] - * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ - * │Esc│1 │2 │3 │4 │5 │6 │7 │8 │9 │0 │- │= │Bspc │ - * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ - * │Tab │Q │W │E │R │T │Y │U │I │O │P │[ │] │\ │ - * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ - * │Caps L│A │S │D │F │G │H │J │K │L │; │' │Enter │ - * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┬───┤ - * │Shift │Z │X │C │V │B │N │M │, │. │Shift │↑ │/ │ - * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬───┼───┼───┤ - * │Ctl │OS │Alt │ Space │Alt│Ctl│← │↓ │→ │ - * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┘ - */ - [0] = LAYOUT_60_ansi_arrow(KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, LT(2, KC_RALT), LT(1, KC_RCTL), KC_LEFT, KC_DOWN, KC_RGHT - ), - - /* - * Fn Layer [1] - * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ - * │` │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│Delete │ - * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ - * │Bri+ │ │ │End│Rst│ │ │ │Ins│ │P S│ │ │Eject│ - * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ - * │Bri- │ │S L│ │ │ │Hm │ │ │ │ │ │Mute │ - * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┬───┤ - * │Vol+ │ │ │Cal│ │ │N L│Ml │ │ │Pause │P U│ │ - * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬───┼───┼───┤ - * │Vol-│Rwd │F FD│ Play │Stp│ │Prv│P D│Nxt│ - * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┘ - */ - [1] = LAYOUT_60_ansi_arrow(KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, - KC_BRIU, KC_TRNS, KC_TRNS, KC_END, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_EJCT, - KC_BRID, KC_TRNS, KC_SLCK, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, - KC_VOLU, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_TRNS, KC_NLCK, KC_MAIL, KC_TRNS, KC_TRNS, KC_PAUS, KC_PGUP, KC_TRNS, - KC_VOLD, KC_MRWD, KC_MFFD, KC_MPLY, KC_MSTP, KC_TRNS, KC_MPRV, KC_PGDN, KC_MNXT - ), +enum layer_names { + _BASE, // Default Layer + _FN, // Fn Layer 1 + _SETTINGS // Fn Layer 2 +}; - /* - * Fn Layer [2] - * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ - * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ - * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ - * │ │R T│R M│Hu+│Hu-│Sa+│Sa-│Br+│Br-│ │ │ │ │ │ - * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ - * │ │ │ │ │ │ │ │ │ │ │ │ │ │ - * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┬───┤ - * │ │ │ │ │BL-│B T│BL+│B C│ │ │ │ │ │ - * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬───┼───┼───┤ - * │ │ │ │ │ │ │ │ │ │ - * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┘ - */ - [2] = LAYOUT_60_ansi_arrow(KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_TOGG, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ) +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + // Default Layer + [_BASE] = LAYOUT_60_ansi_arrow( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, LT(2, KC_RALT), LT(1, KC_RCTL), KC_LEFT, KC_DOWN, KC_RGHT + ), + // Fn Layer 1 + [_FN] = LAYOUT_60_ansi_arrow( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_BRIU, KC_TRNS, KC_TRNS, KC_END, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_EJCT, + KC_BRID, KC_TRNS, KC_SLCK, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, + KC_VOLU, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_TRNS, KC_NLCK, KC_MAIL, KC_TRNS, KC_TRNS, KC_PAUS, KC_PGUP, KC_TRNS, + KC_VOLD, KC_MRWD, KC_MFFD, KC_MPLY, KC_MSTP, KC_TRNS, KC_MPRV, KC_PGDN, KC_MNXT + ), + // Fn Layer 2 + [_SETTINGS] = LAYOUT_60_ansi_arrow( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_TOGG, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) }; void keyboard_post_init_user(void) { - rgblight_enable_noeeprom(); - rgblight_sethsv_noeeprom(0, 0, 0); + rgblight_enable_noeeprom(); + rgblight_sethsv_noeeprom(0, 0, 0); } -/* RGB Lighting/LED/Underglow as Caps Lock, Num Lock, Scroll Lock, and Layer indicator */ - void update_led(void) { - /* Num Lock Indicator */ - if (host_keyboard_led_state().num_lock) { - rgblight_setrgb(225, 8, 0); - } - /* Scroll Lock Indicator */ - if (host_keyboard_led_state().scroll_lock) { - rgblight_setrgb(0, 100, 255); - } - } +// RGB Lighting/LED/Underglow as Caps Lock, Num Lock, Scroll Lock, and Layer Indicator +void update_led(void) { + // Num Lock Indicator + if (host_keyboard_led_state().num_lock) { + rgblight_setrgb(225, 8, 0); + } + // Scroll Lock Indicator + if (host_keyboard_led_state().scroll_lock) { + rgblight_setrgb(255, 110, 0); + } +} - void led_set_user(uint8_t usb_led) { - /* Caps Lock Indicator */ - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { - writePinLow(B2); - rgblight_setrgb(100, 255, 100); - } - /* Layer Indicator */ - else { - switch (get_highest_layer(layer_state)) { - /* Fn Layer [1] Indicator */ - case 1: - rgblight_setrgb(255, 110, 0); - break; - /* Fn Layer [2] Indicator */ - case 2: - rgblight_setrgb(255, 110, 0); - break; - /* Default Layer [0] Indicator */ - default: - rgblight_setrgb(0, 0, 0); - break; - } - update_led(); +void led_set_user(uint8_t usb_led) { + // Caps Lock Indicator + if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { + writePinLow(B2); + rgblight_setrgb(100, 255, 100); + } + // Layer Indicator + else { + switch (get_highest_layer(layer_state)) { + // Fn Layer 1 Indicator + case _FN: + rgblight_setrgb(100, 255, 100); + break; + // Fn Layer 2 Indicator + case _SETTINGS: + rgblight_setrgb(100, 255, 100); + break; + // Default Layer Indicator + case _BASE: + rgblight_setrgb(0, 0, 0); + break; } - } + update_led(); + } +} layer_state_t layer_state_set_user(layer_state_t state) { - update_led(); - return state; + update_led(); + return state; } diff --git a/layouts/community/60_ansi_arrow/mrsendyyk/readme.md b/layouts/community/60_ansi_arrow/mrsendyyk/readme.md index 4ddd6703d7a4..838630221852 100644 --- a/layouts/community/60_ansi_arrow/mrsendyyk/readme.md +++ b/layouts/community/60_ansi_arrow/mrsendyyk/readme.md @@ -1,50 +1,85 @@ -# [Sendy YK](https://mr.sendyyk.com)'s 60_ansi_arrow Keymap -`LAYOUT_60_ansi_arrow` with RGB Lighting/LED/Underglow as Caps Lock, Num Lock, Scroll Lock, and Layer indicator. +# Sendy YK's 60% ANSI Arrow Layout and Keymap -### Default Layer [0] +[https://mr.sendyyk.com](https://mr.sendyyk.com) -``` -┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ -│Esc│1 │2 │3 │4 │5 │6 │7 │8 │9 │0 │- │= │Bspc │ -├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ -│Tab │Q │W │E │R │T │Y │U │I │O │P │[ │] │\ │ -├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ -│Caps L│A │S │D │F │G │H │J │K │L │; │' │Enter │ -├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┬───┤ -│Shift │Z │X │C │V │B │N │M │, │. │Shift │↑ │/ │ -├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬───┼───┼───┤ -│Ctl │OS │Alt │ Space │Alt│Ctl│← │↓ │→ │ -└────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┘ -``` +## 60% ANSI Arrow Layout + +![LAYOUT_60_ansi_arrow](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/dz60/assets/layout-60-ansi-arrow.png) + +## Keymap + +### Default Layer + +![_BASE](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/dz60/assets/layout-60-ansi-arrow-keymap---layer-0.png) + +### Fn Layer 1 + +Press and hold *right* **Ctrl** key. + +![_FN](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/dz60/assets/layout-60-ansi-arrow-keymap---layer-1.png) + +### Fn Layer 2 + +Press and hold *right* **Alt** key. -### Fn Layer [1] -Press and hold *right* **Ctl** key. +![_SETTINGS](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/dz60/assets/layout-60-ansi-arrow-keymap---layer-2.png) + +### RGB Lighting/LED/Underglow as Caps Lock, Num Lock, Scroll Lock, and Layer Indicator + +#### Caps Lock Indicator + +```c + // Caps Lock Indicator + if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { + writePinLow(B2); + rgblight_setrgb(100, 255, 100); + } ``` -┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ -│` │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│Delete │ -├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ -│Bri+ │ │ │End│Rst│ │ │ │Ins│ │P S│ │ │Eject│ -├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ -│Bri- │ │S L│ │ │ │Hm │ │ │ │ │ │Mute │ -├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┬───┤ -│Vol+ │ │ │Cal│ │ │N L│Ml │ │ │Pause │P U│ │ -├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬───┼───┼───┤ -│Vol-│Rwd │F FD│ Play │Stp│ │Prv│P D│Nxt│ -└────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┘ + +#### Num Lock Indicator + +```c + // Num Lock Indicator + if (host_keyboard_led_state().num_lock) { + rgblight_setrgb(225, 8, 0); + } ``` -### Fn Layer [2] -Press and hold *right* **Alt** key. +#### Scroll Lock Indicator +```c + // Scroll Lock Indicator + if (host_keyboard_led_state().scroll_lock) { + rgblight_setrgb(255, 110, 0); + } ``` -┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ -│ │ │ │ │ │ │ │ │ │ │ │ │ │ │ -├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ -│ │R T│R M│Hu+│Hu-│Sa+│Sa-│Br+│Br-│ │ │ │ │ │ -├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ -│ │ │ │ │ │ │ │ │ │ │ │ │ │ -├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┬───┤ -│ │ │ │ │BL-│B T│BL+│B C│ │ │ │ │ │ -├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬───┼───┼───┤ -│ │ │ │ │ │ │ │ │ │ -└────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┘ + +#### Layer Indicator + +```c + // Layer Indicator + else { + switch (get_highest_layer(layer_state)) { + // Fn Layer 1 Indicator + case _FN: + rgblight_setrgb(100, 255, 100); + break; + // Fn Layer 2 Indicator + case _SETTINGS: + rgblight_setrgb(100, 255, 100); + break; + // Default Layer Indicator + case _BASE: + rgblight_setrgb(0, 0, 0); + break; + } + update_led(); + } ``` + +## Build The Firmware + +You will need to build the firmware. To do so go to your terminal window and run the compile command: + + qmk compile -kb dz60 -km mrsendyyk + +See [The Complete Newbs Guide To QMK](https://docs.qmk.fm/#/newbs). diff --git a/layouts/community/60_ansi_arrow/readme.md b/layouts/community/60_ansi_arrow/readme.md index 358740f30e22..2fc165376e18 100644 --- a/layouts/community/60_ansi_arrow/readme.md +++ b/layouts/community/60_ansi_arrow/readme.md @@ -1,25 +1,14 @@ # 60_ansi_arrow + This is the 60% ANSI Arrow keyboard layout. ## Requirements ### 1. Layout Defined + A keyboard's `.h` file needs to have `LAYOUT_60_ansi_arrow` defined + ```c -/* - * LAYOUT_60_ansi_arrow - * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ - * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0e │ - * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ - * │10 │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e │ - * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ - * │20 │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d │ - * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┬───┤ - * │30 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3c │3d │3e │ - * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬───┼───┼───┤ - * │40 │41 │43 │46 │4a │4b │4c │4d │4e │ - * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┘ - */ #define LAYOUT_60_ansi_arrow( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \ k10, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \ @@ -35,80 +24,71 @@ A keyboard's `.h` file needs to have `LAYOUT_60_ansi_arrow` defined } ``` +![LAYOUT_60_ansi_arrow](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/dz60/assets/layout-60-ansi-arrow.png) + ### 2. Configuring rules.mk + `rules.mk` needs to have the following line: LAYOUTS = 60_ansi_arrow ### 3. Defining a Keymap + A keymap must be defined at qmk_firmware/layouts/community/60_ansi_arrow/yourfoldername/keymap.c + This keymap must have a `LAYOUT_60_ansi_arrow` layout defined. + ```c -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* - * Default Layer [0] - * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ - * │Esc│1 │2 │3 │4 │5 │6 │7 │8 │9 │0 │- │= │Bspc │ - * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ - * │Tab │Q │W │E │R │T │Y │U │I │O │P │[ │] │\ │ - * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ - * │Caps L│A │S │D │F │G │H │J │K │L │; │' │Enter │ - * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┬───┤ - * │Shift │Z │X │C │V │B │N │M │, │. │Shift │↑ │/ │ - * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬───┼───┼───┤ - * │Ctl │OS │Alt │ Space │Alt│Ctl│← │↓ │→ │ - * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┘ - */ - [0] = LAYOUT_60_ansi_arrow(KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, LT(2, KC_RALT), LT(1, KC_RCTL), KC_LEFT, KC_DOWN, KC_RGHT - ), - - /* - * Fn Layer [1] - * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ - * │` │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│Delete │ - * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ - * │Bri+ │ │ │End│Rst│ │ │ │Ins│ │P S│ │ │Eject│ - * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ - * │Bri- │ │S L│ │ │ │Hm │ │ │ │ │ │Mute │ - * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┬───┤ - * │Vol+ │ │ │Cal│ │ │N L│Ml │ │ │Pause │P U│ │ - * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬───┼───┼───┤ - * │Vol-│Rwd │F FD│ Play │Stp│ │Prv│P D│Nxt│ - * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┘ - */ - [1] = LAYOUT_60_ansi_arrow(KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, - KC_BRIU, KC_TRNS, KC_TRNS, KC_END, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_EJCT, - KC_BRID, KC_TRNS, KC_SLCK, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, - KC_VOLU, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_TRNS, KC_NLCK, KC_MAIL, KC_TRNS, KC_TRNS, KC_PAUS, KC_PGUP, KC_TRNS, - KC_VOLD, KC_MRWD, KC_MFFD, KC_MPLY, KC_MSTP, KC_TRNS, KC_MPRV, KC_PGDN, KC_MNXT - ), - - /* - * Fn Layer [2] - * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ - * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ - * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ - * │ │R T│R M│Hu+│Hu-│Sa+│Sa-│Br+│Br-│ │ │ │ │ │ - * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ - * │ │ │ │ │ │ │ │ │ │ │ │ │ │ - * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┬───┤ - * │ │ │ │ │BL-│B T│BL+│B C│ │ │ │ │ │ - * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬───┼───┼───┤ - * │ │ │ │ │ │ │ │ │ │ - * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┘ - */ - [2] = LAYOUT_60_ansi_arrow(KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_TOGG, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ) +#include QMK_KEYBOARD_H + +enum layer_names { + _BASE, // Default Layer + _FN, // Fn Layer 1 + _SETTINGS // Fn Layer 2 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + // Default Layer + [_BASE] = LAYOUT_60_ansi_arrow( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, LT(2, KC_RALT), LT(1, KC_RCTL), KC_LEFT, KC_DOWN, KC_RGHT + ), + // Fn Layer 1 + [_FN] = LAYOUT_60_ansi_arrow( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_BRIU, KC_TRNS, KC_TRNS, KC_END, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_EJCT, + KC_BRID, KC_TRNS, KC_SLCK, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, + KC_VOLU, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_TRNS, KC_NLCK, KC_MAIL, KC_TRNS, KC_TRNS, KC_PAUS, KC_PGUP, KC_TRNS, + KC_VOLD, KC_MRWD, KC_MFFD, KC_MPLY, KC_MSTP, KC_TRNS, KC_MPRV, KC_PGDN, KC_MNXT + ), + // Fn Layer 2 + [_SETTINGS] = LAYOUT_60_ansi_arrow( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_TOGG, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) }; ``` + +### Default Layer + +![_BASE](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/dz60/assets/layout-60-ansi-arrow-keymap---layer-0.png) + +### Fn Layer 1 + +Press and hold *right* **Ctrl** key. + +![_FN](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/dz60/assets/layout-60-ansi-arrow-keymap---layer-1.png) + +### Fn Layer 2 + +Press and hold *right* **Alt** key. + +![_SETTINGS](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/dz60/assets/layout-60-ansi-arrow-keymap---layer-2.png) diff --git a/layouts/community/ortho_4x12/jotix/keymap.c b/layouts/community/ortho_4x12/jotix/keymap.c index 867e40a380f0..63a0494742d9 100644 --- a/layouts/community/ortho_4x12/jotix/keymap.c +++ b/layouts/community/ortho_4x12/jotix/keymap.c @@ -40,7 +40,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // ├───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┤ _______,KC_MPRV,KC_MPLY,KC_MNXT,KC_END, KC_PGDN,KC_UNDS,KC_PLUS,KC_WH_U,KC_BTN1,KC_MS_U,KC_BTN2, // ├───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┤ - _______,_______,_______,_______,_______,_______,TGRAISE,_______,KC_WH_D,KC_MS_L,KC_MS_D,KC_MS_R + _______,_______,_______,_______,_______,_______,_______,_______,KC_WH_D,KC_MS_L,KC_MS_D,KC_MS_R // └───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┘ ), @@ -52,19 +52,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // ├───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┤ _______,DM_REC1,DM_REC2,DM_RSTP,DM_PLY1,DM_PLY2,KC_MINS,KC_EQL, _______,_______,_______,_______, // ├───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┤ - _______,_______,_______,_______,_______,TGLOWER,_______,_______,_______,_______,_______,_______ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______ // └───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┘ ), [_FN] = LAYOUT_ortho_4x12 ( // ┌───────┬───────┬───────┬───────┬───────┬───────┬───────┬───────┬───────┬───────┬───────┬───────┐ - _______,KC_F1, KC_F2, KC_F3, KC_F4, _______,_______,KC_P7, KC_P8, KC_P9, KC_PMNS,_______, + _______,KC_F1, KC_F2, KC_F3, KC_F4, KC_PSCR,KC_INS, KC_P7, KC_P8, KC_P9, KC_PMNS,_______, // ├───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┤ - _______,KC_F5, KC_F6, KC_F7, KC_F8, _______,_______,KC_P4, KC_P5, KC_P6, KC_PPLS,KC_PENT, + _______,KC_F5, KC_F6, KC_F7, KC_F8, KC_SLCK,KC_APP, KC_P4, KC_P5, KC_P6, KC_PPLS,KC_PENT, // ├───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┤ - _______,KC_F9, KC_F10, KC_F11, KC_F12, _______,_______,KC_P1, KC_P2, KC_P3, KC_PAST,KC_PSLS, + _______,KC_F9, KC_F10, KC_F11, KC_F12, KC_PAUS,KC_NLCK,KC_P1, KC_P2, KC_P3, KC_PAST,KC_PSLS, // ├───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┤ - _______,_______,_______,_______,_______,_______,_______,_______,KC_P0, KC_PDOT,KC_LPRN,KC_RPRN + _______,_______,_______,_______,TGLOWER,_______,_______,TGRAISE,KC_P0, KC_PDOT,KC_LPRN,KC_RPRN // └───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┘ ), }; diff --git a/layouts/community/ortho_5x12/xyverz/keymap.c b/layouts/community/ortho_5x12/xyverz/keymap.c index 00fca1b48e49..22147c3a0ab8 100644 --- a/layouts/community/ortho_5x12/xyverz/keymap.c +++ b/layouts/community/ortho_5x12/xyverz/keymap.c @@ -8,6 +8,9 @@ enum custom_keycodes { QWERTY = SAFE_RANGE, COLEMAK, DVORAK, LOWER, RAISE, ADJUS #define GUIBSPC GUI_T(KC_BSPC) // GUI when held, BSPC when tapped. #define RGB_SWR RGB_M_SW // Swirl Animation alias #define RGB_SNK RGB_M_SN // Snake Animation alias +#define MACLOCK LGUI(LCTL(KC_Q)) // Lock my MacBook! +#define RAISE MO(_RAISE) +#define LOWER MO(_LOWER) // clang-format off const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -18,7 +21,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+------+------+------+------+------+------+------| * | Tab | Q | W | E | R | T | Y | U | I | O | P | Del | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | - | A | S | D | F | G | H | J | K | L | ; | " | + * | ` | A | S | D | F | G | H | J | K | L | ; | " | * |------+------+------+------+------+------|------+------+------+------+------+------| * | Shift| Z | X | C | V | B | N | M | , | . | / | Shift| * |------+------+------+------+------+------+------+------+------+------+------+------| @@ -26,16 +29,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_QWERTY] = LAYOUT_ortho_5x12 ( \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL , \ - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_GRV, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, GUIBSPC, KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_ENT \ ), /* Colemak * ,-----------------------------------------------------------------------------------. - * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Grv | * |------+------+------+------+------+------+------+------+------+------+------+------| * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Del | * |------+------+------+------+------+-------------+------+------+------+------+------| @@ -47,9 +50,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_COLEMAK] = LAYOUT_ortho_5x12 ( \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_GRV, \ KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_DEL , \ - KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \ + KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, GUIBSPC, KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_ENT \ ), @@ -60,7 +63,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+------+------+------+------+------+------+------| * | Tab | " | , | . | P | Y | F | G | C | R | L | / | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | O | E | U | I | D | H | T | N | S | - | + * | ` | A | O | E | U | I | D | H | T | N | S | - | * |------+------+------+------+------+------|------+------+------+------+------+------| * | Shift| ; | Q | J | K | X | B | M | W | V | Z | Shift| * |------+------+------+------+------+------+------+------+------+------+------+------| @@ -68,9 +71,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_DVORAK] = LAYOUT_ortho_5x12 ( \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, \ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, \ KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, \ - KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, \ + KC_GRV, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, \ KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, \ KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, GUIBSPC, KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_ENT \ ), @@ -127,7 +130,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+------|------+------+------+------+------+------| * |RGB ON| MODE |RGB SW|RGB KN|RGB GR| HUE- | HUE+ | HUE- | SAT+ | SAT- | VAL+ | VAL- | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | + * | | | | | | | | | | |MACLCK| * `-----------------------------------------------------------------------------------' */ [_ADJUST] = LAYOUT_ortho_5x12 ( \ @@ -135,7 +138,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ _______, _______, RGB_M_P, RGB_M_B, RGB_M_R, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ RGB_TOG, RGB_MOD, RGB_SWR, RGB_M_K, RGB_M_G, RGB_HUI, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, MACLOCK \ ) }; diff --git a/layouts/default/60_ansi_arrow/default_60_ansi_arrow/keymap.c b/layouts/default/60_ansi_arrow/default_60_ansi_arrow/keymap.c index acbf16ad93b0..4330c9ceedaa 100644 --- a/layouts/default/60_ansi_arrow/default_60_ansi_arrow/keymap.c +++ b/layouts/default/60_ansi_arrow/default_60_ansi_arrow/keymap.c @@ -1,67 +1,50 @@ -#include QMK_KEYBOARD_H +/* Copyright (C) 2020 Sendy YK (https://mr.sendyyk.com). + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* - * Default Layer [0] - * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ - * │Esc│1 │2 │3 │4 │5 │6 │7 │8 │9 │0 │- │= │Bspc │ - * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ - * │Tab │Q │W │E │R │T │Y │U │I │O │P │[ │] │\ │ - * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ - * │Caps L│A │S │D │F │G │H │J │K │L │; │' │Enter │ - * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┬───┤ - * │Shift │Z │X │C │V │B │N │M │, │. │Shift │↑ │/ │ - * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬───┼───┼───┤ - * │Ctl │OS │Alt │ Space │Alt│Ctl│← │↓ │→ │ - * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┘ - */ - [0] = LAYOUT_60_ansi_arrow(KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, LT(2, KC_RALT), LT(1, KC_RCTL), KC_LEFT, KC_DOWN, KC_RGHT - ), +#include QMK_KEYBOARD_H - /* - * Fn Layer [1] - * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ - * │` │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│Delete │ - * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ - * │Bri+ │ │ │End│Rst│ │ │ │Ins│ │P S│ │ │Eject│ - * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ - * │Bri- │ │S L│ │ │ │Hm │ │ │ │ │ │Mute │ - * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┬───┤ - * │Vol+ │ │ │Cal│ │ │N L│Ml │ │ │Pause │P U│ │ - * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬───┼───┼───┤ - * │Vol-│Rwd │F FD│ Play │Stp│ │Prv│P D│Nxt│ - * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┘ - */ - [1] = LAYOUT_60_ansi_arrow(KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, - KC_BRIU, KC_TRNS, KC_TRNS, KC_END, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_EJCT, - KC_BRID, KC_TRNS, KC_SLCK, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, - KC_VOLU, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_TRNS, KC_NLCK, KC_MAIL, KC_TRNS, KC_TRNS, KC_PAUS, KC_PGUP, KC_TRNS, - KC_VOLD, KC_MRWD, KC_MFFD, KC_MPLY, KC_MSTP, KC_TRNS, KC_MPRV, KC_PGDN, KC_MNXT - ), +enum layer_names { + _BASE, // Default Layer + _FN, // Fn Layer 1 + _SETTINGS // Fn Layer 2 +}; - /* - * Fn Layer [2] - * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ - * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ - * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ - * │ │R T│R M│Hu+│Hu-│Sa+│Sa-│Br+│Br-│ │ │ │ │ │ - * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ - * │ │ │ │ │ │ │ │ │ │ │ │ │ │ - * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┬───┤ - * │ │ │ │ │BL-│B T│BL+│B C│ │ │ │ │ │ - * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬───┼───┼───┤ - * │ │ │ │ │ │ │ │ │ │ - * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┘ - */ - [2] = LAYOUT_60_ansi_arrow(KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_TOGG, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ) +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + // Default Layer + [_BASE] = LAYOUT_60_ansi_arrow( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, LT(2, KC_RALT), LT(1, KC_RCTL), KC_LEFT, KC_DOWN, KC_RGHT + ), + // Fn Layer 1 + [_FN] = LAYOUT_60_ansi_arrow( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_BRIU, KC_TRNS, KC_TRNS, KC_END, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_EJCT, + KC_BRID, KC_TRNS, KC_SLCK, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, + KC_VOLU, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_TRNS, KC_NLCK, KC_MAIL, KC_TRNS, KC_TRNS, KC_PAUS, KC_PGUP, KC_TRNS, + KC_VOLD, KC_MRWD, KC_MFFD, KC_MPLY, KC_MSTP, KC_TRNS, KC_MPRV, KC_PGDN, KC_MNXT + ), + // Fn Layer 2 + [_SETTINGS] = LAYOUT_60_ansi_arrow( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_TOGG, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) }; diff --git a/layouts/default/60_ansi_arrow/info.json b/layouts/default/60_ansi_arrow/info.json index 6bd85a6b9c0b..14c46a43d0f5 100644 --- a/layouts/default/60_ansi_arrow/info.json +++ b/layouts/default/60_ansi_arrow/info.json @@ -1,7 +1,7 @@ { "keyboard_name": "60% ANSI Arrow Layout", - "url": "", - "maintainer": "qmk", + "url": "https://mr.sendyyk.com", + "maintainer": "Sendy YK", "width": 15, "height": 5, "layouts": { diff --git a/layouts/default/60_ansi_arrow/readme.md b/layouts/default/60_ansi_arrow/readme.md index 8d6e6c455321..1a92c31de591 100644 --- a/layouts/default/60_ansi_arrow/readme.md +++ b/layouts/default/60_ansi_arrow/readme.md @@ -1,50 +1,23 @@ -# 60_ansi_arrow -`LAYOUT_60_ansi_arrow` - -### Default Layer [0] - -``` -┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ -│Esc│1 │2 │3 │4 │5 │6 │7 │8 │9 │0 │- │= │Bspc │ -├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ -│Tab │Q │W │E │R │T │Y │U │I │O │P │[ │] │\ │ -├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ -│Caps L│A │S │D │F │G │H │J │K │L │; │' │Enter │ -├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┬───┤ -│Shift │Z │X │C │V │B │N │M │, │. │Shift │↑ │/ │ -├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬───┼───┼───┤ -│Ctl │OS │Alt │ Space │Alt│Ctl│← │↓ │→ │ -└────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┘ -``` - -### Fn Layer [1] -Press and hold *right* **Ctl** key. -``` -┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ -│` │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│Delete │ -├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ -│Bri+ │ │ │End│Rst│ │ │ │Ins│ │P S│ │ │Eject│ -├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ -│Bri- │ │S L│ │ │ │Hm │ │ │ │ │ │Mute │ -├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┬───┤ -│Vol+ │ │ │Cal│ │ │N L│Ml │ │ │Pause │P U│ │ -├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬───┼───┼───┤ -│Vol-│Rwd │F FD│ Play │Stp│ │Prv│P D│Nxt│ -└────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┘ -``` - -### Fn Layer [2] +# 60_ansi_arrow and Keymap + +## 60% ANSI Arrow Layout + +![LAYOUT_60_ansi_arrow](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/dz60/assets/layout-60-ansi-arrow.png) + +## Keymap + +### Default Layer + +![_BASE](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/dz60/assets/layout-60-ansi-arrow-keymap---layer-0.png) + +### Fn Layer 1 + +Press and hold *right* **Ctrl** key. + +![_FN](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/dz60/assets/layout-60-ansi-arrow-keymap---layer-1.png) + +### Fn Layer 2 + Press and hold *right* **Alt** key. -``` -┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ -│ │ │ │ │ │ │ │ │ │ │ │ │ │ │ -├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ -│ │R T│R M│Hu+│Hu-│Sa+│Sa-│Br+│Br-│ │ │ │ │ │ -├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ -│ │ │ │ │ │ │ │ │ │ │ │ │ │ -├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┬───┤ -│ │ │ │ │BL-│B T│BL+│B C│ │ │ │ │ │ -├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬───┼───┼───┤ -│ │ │ │ │ │ │ │ │ │ -└────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┘ -``` + +![_SETTINGS](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/dz60/assets/layout-60-ansi-arrow-keymap---layer-2.png) diff --git a/lib/python/qmk/cli/doctor.py b/lib/python/qmk/cli/doctor.py index 4d7ba52181da..920615396e18 100755 --- a/lib/python/qmk/cli/doctor.py +++ b/lib/python/qmk/cli/doctor.py @@ -10,6 +10,7 @@ from milc import cli from qmk import submodules +from qmk.constants import QMK_FIRMWARE from qmk.questions import yesno from qmk.commands import run @@ -291,6 +292,8 @@ def doctor(cli): cli.log.error('Unsupported OS detected: %s', platform_id) ok = False + cli.log.info('QMK home: {fg_cyan}%s', QMK_FIRMWARE) + # Make sure the basic CLI tools we need are available and can be executed. bin_ok = check_binaries() diff --git a/lib/python/qmk/constants.py b/lib/python/qmk/constants.py index 36a20adf4be1..0a4708e4ce76 100644 --- a/lib/python/qmk/constants.py +++ b/lib/python/qmk/constants.py @@ -9,7 +9,7 @@ MAX_KEYBOARD_SUBFOLDERS = 5 # Supported processor types -ARM_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303' +ARM_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F411' AVR_PROCESSORS = 'at90usb1286', 'at90usb646', 'atmega16u2', 'atmega328p', 'atmega32a', 'atmega32u2', 'atmega32u4', None ALL_PROCESSORS = ARM_PROCESSORS + AVR_PROCESSORS VUSB_PROCESSORS = 'atmega328p', 'atmega32a', 'atmega328', 'attiny85' diff --git a/quantum/dynamic_keymap.c b/quantum/dynamic_keymap.c index 27ee6a284055..0608b469c088 100644 --- a/quantum/dynamic_keymap.c +++ b/quantum/dynamic_keymap.c @@ -42,6 +42,11 @@ # endif #endif +// Due to usage of uint16_t check for max 65535 +#if DYNAMIC_KEYMAP_EEPROM_MAX_ADDR > 65535 +# error DYNAMIC_KEYMAP_EEPROM_MAX_ADDR must be less than 65536 +#endif + // If DYNAMIC_KEYMAP_EEPROM_ADDR not explicitly defined in config.h, // default it start after VIA_EEPROM_CUSTOM_ADDR+VIA_EEPROM_CUSTOM_SIZE #ifndef DYNAMIC_KEYMAP_EEPROM_ADDR diff --git a/quantum/mcu_selection.mk b/quantum/mcu_selection.mk index 33a0cabc84e5..6ec5dff5f512 100644 --- a/quantum/mcu_selection.mk +++ b/quantum/mcu_selection.mk @@ -82,37 +82,37 @@ ifneq ($(findstring MK20DX256, $(MCU)),) BOARD ?= PJRC_TEENSY_3_1 endif -ifneq ($(findstring STM32F303, $(MCU)),) +ifneq ($(findstring STM32F042, $(MCU)),) # Cortex version - MCU = cortex-m4 + MCU = cortex-m0 # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 + ARMV = 6 ## chip/board settings # - the next two should match the directories in # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 - MCU_SERIES = STM32F3xx + MCU_SERIES = STM32F0xx # Linker script to use # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ # or /ld/ - MCU_LDSCRIPT ?= STM32F303xC + MCU_LDSCRIPT ?= STM32F042x6 # Startup code to use # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32f3xx + MCU_STARTUP ?= stm32f0xx # Board: it should exist either in /os/hal/boards/, # /boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_F303XC + BOARD ?= GENERIC_STM32_F042X6 - USE_FPU ?= yes + USE_FPU ?= no # Options to pass to dfu-util when flashing - DFU_ARGS ?= -d 0483:df11 -a 0 -s 0x08000000:leave - DFU_SUFFIX_ARGS ?= -v 0483 -p df11 + DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave + DFU_SUFFIX_ARGS ?= -v 0483 -p DF11 endif ifneq ($(findstring STM32F072, $(MCU)),) @@ -144,46 +144,46 @@ ifneq ($(findstring STM32F072, $(MCU)),) USE_FPU ?= no # Options to pass to dfu-util when flashing - DFU_ARGS ?= -d 0483:df11 -a 0 -s 0x08000000:leave - DFU_SUFFIX_ARGS ?= -v 0483 -p df11 + DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave + DFU_SUFFIX_ARGS ?= -v 0483 -p DF11 endif -ifneq ($(findstring STM32F042, $(MCU)),) +ifneq ($(findstring STM32F103, $(MCU)),) # Cortex version - MCU = cortex-m0 + MCU = cortex-m3 # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 6 + ARMV = 7 ## chip/board settings # - the next two should match the directories in # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 - MCU_SERIES = STM32F0xx + MCU_SERIES = STM32F1xx # Linker script to use # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ # or /ld/ - MCU_LDSCRIPT ?= STM32F042x6 + MCU_LDSCRIPT ?= STM32F103x8 # Startup code to use # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32f0xx + MCU_STARTUP ?= stm32f1xx # Board: it should exist either in /os/hal/boards/, # /boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_F042X6 + BOARD ?= GENERIC_STM32_F103 USE_FPU ?= no # Options to pass to dfu-util when flashing - DFU_ARGS ?= -d 0483:df11 -a 0 -s 0x08000000:leave - DFU_SUFFIX_ARGS ?= -v 0483 -p df11 + DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave + DFU_SUFFIX_ARGS ?= -v 0483 -p DF11 endif -ifneq ($(findstring STM32F103, $(MCU)),) +ifneq ($(findstring STM32F303, $(MCU)),) # Cortex version - MCU = cortex-m3 + MCU = cortex-m4 # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 ARMV = 7 @@ -192,26 +192,92 @@ ifneq ($(findstring STM32F103, $(MCU)),) # - the next two should match the directories in # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 - MCU_SERIES = STM32F1xx + MCU_SERIES = STM32F3xx # Linker script to use # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ # or /ld/ - MCU_LDSCRIPT ?= STM32F103x8 + MCU_LDSCRIPT ?= STM32F303xC # Startup code to use # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32f1xx + MCU_STARTUP ?= stm32f3xx # Board: it should exist either in /os/hal/boards/, # /boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_F103 + BOARD ?= GENERIC_STM32_F303XC - USE_FPU ?= no + USE_FPU ?= yes + + # Options to pass to dfu-util when flashing + DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave + DFU_SUFFIX_ARGS ?= -v 0483 -p DF11 +endif + +ifneq ($(findstring STM32F401, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32F4xx + + # Linker script to use + # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ + # or /ld/ + MCU_LDSCRIPT ?= STM32F401xC + + # Startup code to use + # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32f4xx + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= BLACKPILL_STM32_F401 + + USE_FPU ?= yes + + # Options to pass to dfu-util when flashing + DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave + DFU_SUFFIX_ARGS ?= -v 0483 -p DF11 +endif + +ifneq ($(findstring STM32F411, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32F4xx + + # Linker script to use + # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ + # or /ld/ + MCU_LDSCRIPT ?= STM32F411xE + + # Startup code to use + # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32f4xx + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= BLACKPILL_STM32_F411 + + USE_FPU ?= yes # Options to pass to dfu-util when flashing - DFU_ARGS ?= -d 0483:df11 -a 0 -s 0x08000000:leave - DFU_SUFFIX_ARGS ?= -v 0483 -p df11 + DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave + DFU_SUFFIX_ARGS ?= -v 0483 -p DF11 endif ifneq (,$(filter $(MCU),atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb1286)) diff --git a/quantum/via.c b/quantum/via.c index f2599d1d21b6..7c3b7f924803 100644 --- a/quantum/via.c +++ b/quantum/via.c @@ -186,7 +186,7 @@ bool process_record_via(uint16_t keycode, keyrecord_t *record) { // Keyboard level code can override this to handle custom messages from VIA. // See raw_hid_receive() implementation. -// DO NOT call raw_hid_send() in the overide function. +// DO NOT call raw_hid_send() in the override function. __attribute__((weak)) void raw_hid_receive_kb(uint8_t *data, uint8_t length) { uint8_t *command_id = &(data[0]); *command_id = id_unhandled; diff --git a/tmk_core/avr.mk b/tmk_core/avr.mk index 3cb34dc66503..336a83e9d314 100644 --- a/tmk_core/avr.mk +++ b/tmk_core/avr.mk @@ -122,13 +122,14 @@ define EXEC_DFU if [ "$(1)" ]; then \ $(DFU_PROGRAMMER) $(MCU) flash --force --eeprom $(QUANTUM_PATH)/split_common/$(1);\ fi; \ + $(DFU_PROGRAMMER) $(MCU) flash --force $(BUILD_DIR)/$(TARGET).hex;\ else \ $(DFU_PROGRAMMER) $(MCU) erase; \ if [ "$(1)" ]; then \ $(DFU_PROGRAMMER) $(MCU) flash-eeprom $(QUANTUM_PATH)/split_common/$(1);\ fi; \ + $(DFU_PROGRAMMER) $(MCU) flash $(BUILD_DIR)/$(TARGET).hex;\ fi; \ - $(DFU_PROGRAMMER) $(MCU) flash --force $(BUILD_DIR)/$(TARGET).hex;\ $(DFU_PROGRAMMER) $(MCU) reset endef diff --git a/tmk_core/common.mk b/tmk_core/common.mk index 3c9de33c9940..fdf2aa09727f 100644 --- a/tmk_core/common.mk +++ b/tmk_core/common.mk @@ -99,11 +99,15 @@ ifeq ($(strip $(COMMAND_ENABLE)), yes) endif ifeq ($(strip $(NKRO_ENABLE)), yes) - ifneq ($(PROTOCOL),VUSB) + ifeq ($(PROTOCOL), VUSB) + $(info NKRO is not currently supported on V-USB, and has been disabled.) + else ifeq ($(strip $(BLUETOOTH_ENABLE)), yes) + $(info NKRO is not currently supported with Bluetooth, and has been disabled.) + else ifneq ($(BLUETOOTH),) + $(info NKRO is not currently supported with Bluetooth, and has been disabled.) + else TMK_COMMON_DEFS += -DNKRO_ENABLE SHARED_EP_ENABLE = yes - else - $(info NKRO is not currently supported on V-USB, and has been disabled.) endif endif @@ -161,6 +165,8 @@ ifeq ($(strip $(LTO_ENABLE)), yes) EXTRAFLAGS += -flto TMK_COMMON_DEFS += -DLTO_ENABLE TMK_COMMON_DEFS += -DLINK_TIME_OPTIMIZATON_ENABLE +else ifdef LINK_TIME_OPTIMIZATION_ENABLE + $(error The LINK_TIME_OPTIMIZATION_ENABLE flag has been renamed to LTO_ENABLE.) endif # Search Path diff --git a/users/badger/README.md b/users/badger/README.md new file mode 100644 index 000000000000..fca1028a59f0 --- /dev/null +++ b/users/badger/README.md @@ -0,0 +1,31 @@ +# A multi-OS keyboard layout with support for both Linux (KDE) and MacOS-specific QWERTY layouts for many 60-ish% keyboards ( + +## Author: [BlueTufa](https://github.com/BlueTufa) + +> Supported Keyboards: 1up RGB and HTE, Clueboard 66, dztech 60 RGB, and partial support for Preonic and Planck ortholinear keyboards. + +## Layouts + +### QWERTY +Default layer: Standard QWERTY layer with CAPS lock mapped to ESC. ESC is a Layer toggle, when held down it maps to KDE-specific MOVE layer. Dedicated Function key for ADJUST layer. I also take advantage of the AG_SWAP when using this keyboard on Linux, which swaps between ALT and GUI on both sides. + +Mac layer: Mostly the same as the default layer, except that the ESC key maps to a MacOS specific set of MOVE layer shortcuts. These leverage a piece of software called Rectangle, which makes up for some of the tiling shortcomings of MacOS. + +### MOVE layer +OS-specific convenience shortcuts. Macros are defined to make it easier to adapt these to other operating systems. The macros also help maintain the spacing that helps with the readability of the layers in source control. + +The main goal of the MOVE layer is to manage window move and resize, and jump to a specific virtual desktop. The other function is to expose VIM-style move keys as arrow keys to other applications. Some keys from ADJUST layer are also redefined here. + +Care was taken to keep the tiling and virtual desktop shortcuts as similar as possible between Linux and MacOS in this MOVE layer. The most notable difference is that I haven't found a good way to do corner tiling in Linux the way that it's supported in MacOS Rectangle. + +REMINDER: The 9-key left-hand pattern requires the installation of the MacOS rectangle app: + +```bash +brew cask install rectangle +``` + +### ADJUST layer +Access to function keys as well as media controls and keyboard settings. Some useful OS action keys are defined here as well. + +### Config layer +Access to Quantum keyboard controls as well as RGB configuration. If audio is supported it would belong in this layer as well. diff --git a/users/badger/badger.c b/users/badger/badger.c new file mode 100644 index 000000000000..455184061046 --- /dev/null +++ b/users/badger/badger.c @@ -0,0 +1,49 @@ +/* +Copyright 2020 Dan White + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "badger.h" + +bool _capsLockState; + +__attribute__ ((weak)) +void keyboard_post_init_user(void) { + _capsLockState = false; +} + +__attribute__ ((weak)) +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case CS_RIGHT: + if (record->event.pressed) { + SEND_STRING(SS_LALT(SS_TAP(X_B)SS_TAP(X_ENTER))); + return false; + } + break; + case CS_DOWN: + if (record->event.pressed) { + SEND_STRING(SS_LALT(SS_TAP(X_V)SS_TAP(X_ENTER))); + return false; + } + break; + case KC_CAPS: + if (record->event.pressed) { + _capsLockState = !_capsLockState; + return true; + } + break; + default: + return true; + } + return true; +} diff --git a/users/badger/badger.h b/users/badger/badger.h new file mode 100644 index 000000000000..bb2dcd0bd3a8 --- /dev/null +++ b/users/badger/badger.h @@ -0,0 +1,109 @@ +/* +Copyright 2020 Dan White + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#pragma once + +#include QMK_KEYBOARD_H + +enum layers { + _QWERTY_MAC, + _MOVE_MAC, + _QWERTY_LINUX, + _MOVE_LINUX, + _ADJUST, + _CONFIG +}; + +enum CustomKeys { + CS_RIGHT = SAFE_RANGE, + CS_DOWN +}; + +#define OS_POP LCTL(KC_F10) +#define MAC_POP LCTL(KC_UP) +#define MAC_FRC LGUI(LALT(KC_ESC)) +#define OS_COPY LSFT(LCTL(KC_C)) +#define OS_PAST LSFT(LCTL(KC_V)) +#define MAC_PST LGUI(KC_V) +#define MAC_CPY LGUI(KC_C) +#define KC_BACK LCTL(LSFT(KC_LBRC)) +#define KC_NEXT LCTL(LSFT(KC_RBRC)) + +#define MOVE LT(_MOVE_LINUX, KC_ESC) +#define MOVE_MAC LT(_MOVE_MAC, KC_ESC) +#define ADJUST MO(_ADJUST) +#define CFG_MAC LT(_CONFIG, MAC_POP) +#define CFG_LNX LT(_CONFIG, OS_POP) + +#define WD_BACK LALT(KC_LEFT) +#define WD_FRWD LALT(KC_RIGHT) + +#define VD_1 LCTL(KC_F1) +#define VD_2 LCTL(KC_F2) +#define VD_3 LCTL(KC_F3) + +#define WM_UH LGUI(KC_UP) +#define WM_BH LGUI(KC_DOWN) +#define WM_LH LGUI(KC_LEFT) +#define WM_RH LGUI(KC_RIGHT) +#define WM_MAX LGUI(KC_PGUP) + +#define CM_RIGHT LGUI(KC_D) +#define CM_DOWN LGUI(LSFT(KC_D)) + +/* THESE are not defaults in KDE and must be set manually */ +#define WM_VD1 HYPR(KC_1) +#define WM_VD2 HYPR(KC_2) +#define WM_VD3 HYPR(KC_3) + +/* IntelliJ / JetBrains shortcuts with Mac keymap */ +#define IJ_BACK LGUI(LALT(KC_LEFT)) +#define IJ_FWD LGUI(LALT(KC_RIGHT)) +#define IJ_UP LGUI(LALT(KC_UP)) +#define IJ_DOWN LGUI(LALT(KC_DOWN)) +#define IJ_IMPL LGUI(LALT(KC_B)) +#define IJ_DECL LGUI(KC_B) +#define IJ_REN LSFT(KC_F6) +#define IJ_USAG LALT(KC_F7) +#define IJ_RUN KC_F9 +#define IJ_STEP KC_F8 +#define IJ_INTO LSFT(KC_F7) +#define IJ_OUT LSFT(KC_F8) +#define IJ_STOP LGUI(KC_F2) +#define IJ_IMPS LCTL(LALT(LSFT(KC_EQUAL))) +#define IJ_IMPH LCTL(LALT(LSFT(KC_MINUS))) +#define IJ_TOP LGUI(KC_HOME) +#define IJ_BOTT LGUI(KC_END) +#define IJ_FIND LGUI(LSFT(KC_F)) + +/* MacOS virtual desktop shortcuts */ +#define M_VD1 LCTL(KC_1) +#define M_VD2 LCTL(KC_2) +#define M_VD3 LCTL(KC_3) + +/* rectangle shortcuts */ +#define MM_ULCN LCTL(LGUI(KC_LEFT)) +#define MM_URCN LCTL(LGUI(KC_RIGHT)) +#define MM_LLCN LCTL(LSFT(LGUI(KC_LEFT))) +#define MM_LRCN LCTL(LSFT(LGUI(KC_RIGHT))) +#define MM_MAX LALT(LGUI(KC_F)) +#define MM_LH HYPR(KC_LBRC) +#define MM_RH HYPR(KC_RBRC) +#define MM_UH LALT(LGUI(KC_UP)) +#define MM_BH LALT(LGUI(KC_DOWN)) +#define MM_LEFT LCTL(LALT(LGUI(KC_LEFT))) +#define MM_RGHT LCTL(LALT(LGUI(KC_RIGHT))) + +#define DF_1 DF(_QWERTY_MAC) +#define DF_2 DF(_QWERTY_LINUX) diff --git a/users/badger/ortho.c b/users/badger/ortho.c new file mode 100644 index 000000000000..ff84e1706f06 --- /dev/null +++ b/users/badger/ortho.c @@ -0,0 +1,151 @@ +/* +Copyright 2020 Dan White + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "ortho.h" +#include "badger.h" + +int _currentLayer; +bool _capsLock; + +#ifdef AUDIO_ENABLE +float capsOnSong[][2] = SONG(CAPS_ON); +float capsOffSong[][2] = SONG(CAPS_OFF); +float defaultLayerSong[][2] = SONG(QWERTY_LAYER_SONG); +float moveLayerSong[][2] = SONG(MOVE_LAYER_SONG); +float macLayerSong[][2] = SONG(MAC_LAYER_SONG); +float raiseLayerSong[][2] = SONG(RAISE_LAYER_SONG); +float lowerLayerSong[][2] = SONG(LOWER_LAYER_SONG); +float agSwapSong[][2] = SONG(LONG_AG_SWAP); +float agNormSong[][2] = SONG(LONG_AG_NORM); +#endif + +__attribute__ ((weak)) +void keyboard_post_init_user(void) { + _capsLock = false; + _currentLayer = _QWERTY_MAC_ORTHO; + layer_on(_currentLayer); +} + +__attribute__ ((weak)) +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + dprintf("Key event recorded. KEYCODE: %u , event: %u\n", keycode, record->event.pressed); + switch (keycode) { + case CS_RIGHT: + if (record->event.pressed) { + SEND_STRING(SS_LALT(SS_TAP(X_B)SS_TAP(X_ENTER))); + return false; + } + break; + case CS_DOWN: + if (record->event.pressed) { + SEND_STRING(SS_LALT(SS_TAP(X_V)SS_TAP(X_ENTER))); + return false; + } + break; + case KC_CAPS: + if (record->event.pressed) { + dprintf("CAPS_LOCK state: %u\n", _capsLock); + _capsLock = !_capsLock; + #ifdef AUDIO_ENABLE + _capsLock ? PLAY_SONG(capsOnSong) : PLAY_SONG(capsOffSong); + #endif + return true; + } + break; + case AG_SWAP: + #ifdef AUDIO_ENABLE + PLAY_SONG(agSwapSong); + #endif + return true; + break; + case AG_NORM: + #ifdef AUDIO_ENABLE + PLAY_SONG(agNormSong); + #endif + return true; + break; + case KC_MAC2: + if (record->event.pressed) { + SEND_STRING("ll\n"); + return false; + } + break; + case KC_MAC1: + if (record->event.pressed) { + SEND_STRING("open https://www.reddit.com/r/mechanicalkeyboards\n"); + return false; + } + break; + case KC_FIRST: + if (record->event.pressed) { + // don't turn off the QWERTY layer + if (_currentLayer != _QWERTY_MAC_ORTHO) { + layer_off(_currentLayer); + } + _currentLayer = _QWERTY_MAC_ORTHO; + layer_on(_currentLayer); + playSongForLayer(_currentLayer); + return false; + } + break; + case KC_LYRC: + if (record->event.pressed) { + dprintf("LYR CYCLE pressed %u, CURRENT_LAYER: %u\n", keycode, _currentLayer); + // don't turn off the QWERTY layer or the ADJUST layer + if (_currentLayer != _QWERTY_MAC_ORTHO) { + layer_off(_currentLayer); + } + // don't lock the ADJUST layer + // since this key is accessible via the ADJUST + // layer, as it will require tricky state management + if (++_currentLayer == _ADJUST_ORTHO) { + _currentLayer = _QWERTY_MAC_ORTHO; + } else { + layer_on(_currentLayer); + } + + playSongForLayer(_currentLayer); + return false; + } + break; + } + return true; +} + +void playSongForLayer(int currentLayer) { + #ifdef AUDIO_ENABLE + switch (currentLayer) { + case _QWERTY_LINUX: + PLAY_SONG(defaultLayerSong); + break; + case _MOVE_LINUX: + PLAY_SONG(moveLayerSong); + break; + case _QWERTY_MAC: + PLAY_SONG(macLayerSong); + break; + case _MOVE_MAC: + PLAY_SONG(moveLayerSong); + break; + case _RAISE: + PLAY_SONG(raiseLayerSong); + break; + case _LOWER: + PLAY_SONG(lowerLayerSong); + break; + default: + break; + } + #endif +} \ No newline at end of file diff --git a/users/badger/ortho.h b/users/badger/ortho.h new file mode 100644 index 000000000000..207f2e2822ec --- /dev/null +++ b/users/badger/ortho.h @@ -0,0 +1,58 @@ +/* +Copyright 2020 Dan White + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#pragma once + +#include "badger.h" + +enum OrthoLayers { + _QWERTY_MAC_ORTHO, + _MOVE_MAC_ORTHO, + _QWERTY_LINUX_ORTHO, + _MOVE_LINUX_ORTHO, + _RAISE, + _LOWER, + _ADJUST_ORTHO +}; + +enum OrthoKeys { + KC_MAC1 = CS_DOWN + 1, + KC_MAC2, + KC_LYRC, + KC_FIRST +}; + +#define P_ADJ LT(_ADJUST_ORTHO, KC_BSPC) +#define RAISE MO(_RAISE) +#define LOWER MO(_LOWER) +#define MOMAC LT(_MOVE_MAC_ORTHO, KC_ESC) +#define MOLNX LT(_MOVE_LINUX_ORTHO, KC_ESC) + +void playSongForLayer(int currentLayer); + +#ifdef AUDIO_ENABLE +#define QWERTY_LAYER_SONG H__NOTE(_G6), H__NOTE(_D6), Q__NOTE(_A5), Q__NOTE(_E5), +#define MAC_LAYER_SONG H__NOTE(_E5), H__NOTE(_A5), Q__NOTE(_D6), Q__NOTE(_G6), \ + ED_NOTE(_E7), E__NOTE(_CS7), E__NOTE(_E6), E__NOTE(_A6), M__NOTE(_CS7, 20), +#define LONG_AG_SWAP Q__NOTE(_G5), Q__NOTE(_D6), Q__NOTE(_A6), Q__NOTE(_E7), \ + SD_NOTE(_B5), SD_NOTE(_A5), SD_NOTE(_B5), SD_NOTE(_A5), +#define LONG_AG_NORM Q__NOTE(_DS4), Q__NOTE(_DS4), B__NOTE(_C5), +#define MOVE_LAYER_SONG E__NOTE(_GS6), E__NOTE(_A6), S__NOTE(_REST), ED_NOTE(_E7), \ + S__NOTE(_REST), ED_NOTE(_GS7), +#define RAISE_LAYER_SONG W__NOTE(_BF5), Q__NOTE(_A5), W__NOTE(_BF5), Q__NOTE(_A5), W__NOTE(_E6), Q__NOTE(_B5), +#define LOWER_LAYER_SONG Q__NOTE(_DS4), E__NOTE(_DS4), E__NOTE(_DS6), Q__NOTE(_DS5), \ + E__NOTE(_DS5), E__NOTE(_DS6), Q__NOTE(_E5), E__NOTE(_E5), E__NOTE(_DS6), Q__NOTE(_DS5), +#define CAPS_ON W__NOTE(_E5), Q__NOTE(_BF5), W__NOTE(_E5), Q__NOTE(_BF5), W__NOTE(_E5), Q__NOTE(_BF5), +#define CAPS_OFF W__NOTE(_E5), Q__NOTE(_BF5), +#endif diff --git a/users/badger/rules.mk b/users/badger/rules.mk new file mode 100644 index 000000000000..4f1507b8f318 --- /dev/null +++ b/users/badger/rules.mk @@ -0,0 +1,2 @@ +SRC += badger.c +SRC += ortho.c diff --git a/users/spotpuff/rules.mk b/users/spotpuff/rules.mk new file mode 100644 index 000000000000..27905483738a --- /dev/null +++ b/users/spotpuff/rules.mk @@ -0,0 +1 @@ +BOOTMAGIC_ENABLE = no