From 195c8a377c441b178d5b013e07b2633976271f48 Mon Sep 17 00:00:00 2001
From: mtei <2170248+mtei@users.noreply.github.com>
Date: Sat, 5 Sep 2020 12:41:39 +0900
Subject: [PATCH 1/3] Replace figures in feature_split_keyboard.md

---
 docs/feature_split_keyboard.md | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/docs/feature_split_keyboard.md b/docs/feature_split_keyboard.md
index ce470b996470..c67b3b658922 100644
--- a/docs/feature_split_keyboard.md
+++ b/docs/feature_split_keyboard.md
@@ -48,11 +48,12 @@ However, USB cables, SATA cables, and even just 4 wires have been known to be us
 
 ### Serial Wiring
 
-The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and D0 (aka PDO or pin 3) between the two Pro Micros. 
+The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and D0/D1/D2/D3 (aka PDO/PD1/PD2/PD3) between the two Pro Micros. 
 
 ?> Note that the pin used here is actually set by `SOFT_SERIAL_PIN` below.
 
-![serial wiring](https://i.imgur.com/C3D1GAQ.png)
+<img alt="sk-pd0-connection-mono" src="https://user-images.githubusercontent.com/2170248/92296488-28e9ad80-ef70-11ea-98be-c40cb48a0319.JPG" width="48%"/>
+<img alt="sk-pd2-connection-mono" src="https://user-images.githubusercontent.com/2170248/92296490-2d15cb00-ef70-11ea-801f-5ace313013e6.JPG" width="48%"/>
 
 ### I<sup>2</sup>C Wiring
 
@@ -60,7 +61,7 @@ The 4 wires of the TRRS cable need to connect GND, VCC, and SCL and SDA (aka PD0
 
 The pull-up resistors may be placed on either half. If you wish to use the halves independently, it is also possible to use 4 resistors and have the pull-ups in both halves.
 
-![I2C wiring](https://i.imgur.com/Hbzhc6E.png)
+<img alt="sk-i2c-connection-mono" src="https://user-images.githubusercontent.com/2170248/92296482-20917280-ef70-11ea-9b6b-4bb14e01ebba.JPG" width="50%"/>
 
 ## Firmware Configuration
 

From 910d8732ad7676d0caf5d1dfb2de2b720ef1fb9a Mon Sep 17 00:00:00 2001
From: mtei <2170248+mtei@users.noreply.github.com>
Date: Sat, 5 Sep 2020 13:01:40 +0900
Subject: [PATCH 2/3] fig update

---
 docs/feature_split_keyboard.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/docs/feature_split_keyboard.md b/docs/feature_split_keyboard.md
index c67b3b658922..a57e9b0d34b6 100644
--- a/docs/feature_split_keyboard.md
+++ b/docs/feature_split_keyboard.md
@@ -61,7 +61,7 @@ The 4 wires of the TRRS cable need to connect GND, VCC, and SCL and SDA (aka PD0
 
 The pull-up resistors may be placed on either half. If you wish to use the halves independently, it is also possible to use 4 resistors and have the pull-ups in both halves.
 
-<img alt="sk-i2c-connection-mono" src="https://user-images.githubusercontent.com/2170248/92296482-20917280-ef70-11ea-9b6b-4bb14e01ebba.JPG" width="50%"/>
+<img alt="sk-i2c-connection-mono" src="https://user-images.githubusercontent.com/2170248/92297182-92b98580-ef77-11ea-9d7d-d6033914af43.JPG" width="50%"/>
 
 ## Firmware Configuration
 

From 56c0808b5928198b9244cc45f485be4f9006c708 Mon Sep 17 00:00:00 2001
From: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
Date: Mon, 7 Sep 2020 12:18:20 +0900
Subject: [PATCH 3/3] Update docs/feature_split_keyboard.md

Co-authored-by: Ryan <fauxpark@gmail.com>
---
 docs/feature_split_keyboard.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/docs/feature_split_keyboard.md b/docs/feature_split_keyboard.md
index a57e9b0d34b6..f054f365b6f2 100644
--- a/docs/feature_split_keyboard.md
+++ b/docs/feature_split_keyboard.md
@@ -48,7 +48,7 @@ However, USB cables, SATA cables, and even just 4 wires have been known to be us
 
 ### Serial Wiring
 
-The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and D0/D1/D2/D3 (aka PDO/PD1/PD2/PD3) between the two Pro Micros. 
+The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and D0/D1/D2/D3 (aka PD0/PD1/PD2/PD3) between the two Pro Micros. 
 
 ?> Note that the pin used here is actually set by `SOFT_SERIAL_PIN` below.