QMK Firmware 0.10.41 Making 10bleoledhub with keymap default [OK] Making 1upkeyboards/1up60hse with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_1upkeyboards_1up60hse_default/keyboards/1upkeyboards/1up60hse/1up60hse.lst, -adhlns=.build/obj_1upkeyboards_1up60hse_default/keyboards/1upkeyboards/1up60hse/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making 1upkeyboards/1up60hte with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_1upkeyboards_1up60hte_default/keyboards/1upkeyboards/1up60hte/1up60hte.lst, -adhlns=.build/obj_1upkeyboards_1up60hte_default/keyboards/1upkeyboards/1up60hte/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making 1upkeyboards/1up60rgb with keymap default [OK] Making 1upkeyboards/super16 with keymap default [OK] Making 1upkeyboards/sweet16/v1 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_1upkeyboards_sweet16_v1_default/keyboards/1upkeyboards/sweet16/sweet16.lst, -adhlns=.build/obj_1upkeyboards_sweet16_v1_default/keyboards/1upkeyboards/sweet16/v1/v1.lst, dropping all -Xassembler and -Wa options. | Making 1upkeyboards/sweet16/v2/promicro with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_1upkeyboards_sweet16_v2_promicro_default/keyboards/1upkeyboards/sweet16/sweet16.lst, -adhlns=.build/obj_1upkeyboards_sweet16_v2_promicro_default/keyboards/1upkeyboards/sweet16/v2/promicro/promicro.lst, dropping all -Xassembler and -Wa options. | Making 1upkeyboards/sweet16/v2/proton_c with keymap default [OK] Making 2key2crawl with keymap default [OK] Making 30wer with keymap default [OK] Making 40percentclub/25 with keymap default [OK] Making 40percentclub/4pack with keymap default [WARNINGS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ Making 40percentclub/4x4 with keymap default [OK] Making 40percentclub/5x5 with keymap default [OK] Making 40percentclub/6lit with keymap default [OK] Making 40percentclub/foobar with keymap default [OK] Making 40percentclub/gherkin with keymap default [OK] Making 40percentclub/half_n_half with keymap default [OK] Making 40percentclub/i75/promicro with keymap default [OK] Making 40percentclub/i75/teensy2 with keymap default [OK] Making 40percentclub/luddite with keymap default [OK] Making 40percentclub/mf68 with keymap default [OK] Making 40percentclub/nano with keymap default [OK] Making 40percentclub/nein with keymap default [OK] Making 40percentclub/nori with keymap default [OK] Making 40percentclub/tomato with keymap default [OK] Making 40percentclub/ut47 with keymap default [OK] Making 45_ats with keymap default [OK] Making 4by3 with keymap default [OK] Making 4pplet/aekiso60/rev_a with keymap default [OK] Making 4pplet/steezy60/rev_a with keymap default [OK] Making 4pplet/waffling60/rev_a with keymap default [OK] Making 6ball with keymap default [OK] Making 7skb/rev1 with keymap default [OK] Making 7splus with keymap default [OK] Making 8pack/rev11 with keymap default [WARNINGS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ Making 8pack/rev12 with keymap default [WARNINGS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ Making 9key with keymap default [OK] Making abacus with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_abacus_default/keyboards/abacus/abacus.lst, -adhlns=.build/obj_abacus_default/keyboards/abacus/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making absinthe with keymap default [OK] Making abstract/ellipse/rev1 with keymap default [OK] Making acheron/arctic with keymap default [OK] Making acheron/austin with keymap default [OK] Making acheron/elongate with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_acheron_elongate_default/keyboards/acheron/elongate/elongate.lst, -adhlns=.build/obj_acheron_elongate_default/keyboards/acheron/elongate/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making acheron/keebspcb with keymap default [OK] Making acheron/shark with keymap default [OK] Making acr60 with keymap default [OK] Making adelheid with keymap default [OK] Making adkb96/rev1 with keymap default [OK] Making aeboards/aegis with keymap default [OK] Making aeboards/constellation with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_aeboards_constellation_default/keyboards/aeboards/constellation/constellation.lst, -adhlns=.build/obj_aeboards_constellation_default/keyboards/aeboards/constellation/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making aeboards/ext65/rev1 with keymap default [OK] Making aeboards/ext65/rev2 with keymap default [OK] Making ai03/equinox/rev0 with keymap default [WARNINGS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ Making ai03/equinox/rev1 with keymap default [OK] Making ai03/lunar with keymap default [OK] Making ai03/orbit with keymap default [OK] Making ai03/orbit_x with keymap default [OK] Making ai03/polaris with keymap default [OK] Making ai03/quasar with keymap default [OK] Making ai03/soyuz with keymap default [OK] Making ai03/vega with keymap default [OK] Making ai03/voyager60_alps with keymap default [OK] Making ajisai74 with keymap default [OK] Making akb/eb46 with keymap default [OK] Making akb/raine with keymap default [OK] Making akegata_denki/device_one with keymap default [OK] Making al1 with keymap default [OK] Making alf/dc60 with keymap default [WARNINGS] * The firmware size is approaching the maximum - 28012/28672 (97%, 660 bytes free) Making alf/x11 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_alf_x11_default/keyboards/alf/x11/x11.lst, -adhlns=.build/obj_alf_x11_default/keyboards/alf/x11/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making alf/x2 with keymap default [OK] Making allison with keymap default [OK] Making allison_numpad with keymap default [OK] Making alpha with keymap default [OK] Making alps64 with keymap default [OK] Making alu84 with keymap default [OK] Making amj40 with keymap default [OK] Making amj60 with keymap default [WARNINGS] * The firmware size is approaching the maximum - 27878/28672 (97%, 794 bytes free) Making amj96 with keymap default [OK] Making amjkeyboard/amj66 with keymap default [WARNINGS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ Making amjpad with keymap default [OK] Making anavi/macropad8 with keymap default [ERRORS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ * The firmware is too large! 28782/28672 (110 bytes over) make[1]: *** [tmk_core/rules.mk:422: check-size] Error 1 Making angel17/alpha with keymap default [OK] Making angel17/rev1 with keymap default [OK] Making angel64/alpha with keymap default [OK] Making angel64/rev1 with keymap default [OK] Making aos/tkl with keymap default [OK] Making aplx6 with keymap default [OK] Making arabica37/rev1 with keymap default [OK] Making arch_36 with keymap default [OK] Making ares with keymap default [OK] Making arisu with keymap default [OK] Making ash1800 with keymap default [OK] Making ash_xiix with keymap default [OK] Making ashpil/modelm_usbc with keymap default [OK] Making at101_bh with keymap default [OK] Making at_at/660m with keymap default [OK] Making atomic with keymap default [OK] Making atreus62 with keymap default [OK] Making atreus/astar with keymap default [OK] Making atreus/astar_mirrored with keymap default [OK] Making atreus/feather with keymap default [WARNINGS] NKRO is not currently supported with Bluetooth, and has been disabled. Making atreus/promicro with keymap default [OK] Making atreus/teensy2 with keymap default [OK] Making atxkb/1894 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_atxkb_1894_default/keyboards/atxkb/1894/1894.lst, -adhlns=.build/obj_atxkb_1894_default/keyboards/atxkb/1894/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making aves65 with keymap default [OK] Making baguette with keymap default [OK] Making bakeneko60 with keymap default [OK] Making bakeneko65 with keymap default [OK] Making bakeneko80 with keymap default [OK] Making bantam44 with keymap default [OK] Making barleycorn with keymap default [OK] Making basekeys/slice/rev1 with keymap default [OK] Making basekeys/slice/rev1_rgb with keymap default [OK] Making basekeys/trifecta with keymap default [OK] Making bat43/rev1 with keymap default [OK] Making bat43/rev2 with keymap default [OK] Making bear_65 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_bear_65_default/keyboards/bear_65/bear_65.lst, -adhlns=.build/obj_bear_65_default/keyboards/bear_65/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making bear_face/v1 with keymap default [WARNINGS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ Making bear_face/v2 with keymap default [WARNINGS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ Making bemeier/bmek/rev1 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_bemeier_bmek_rev1_default/keyboards/bemeier/bmek/bmek.lst, -adhlns=.build/obj_bemeier_bmek_rev1_default/keyboards/bemeier/bmek/rev1/rev1.lst, dropping all -Xassembler and -Wa options. | Making bemeier/bmek/rev2 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_bemeier_bmek_rev2_default/keyboards/bemeier/bmek/bmek.lst, -adhlns=.build/obj_bemeier_bmek_rev2_default/keyboards/bemeier/bmek/rev2/rev2.lst, dropping all -Xassembler and -Wa options. | Making bemeier/bmek/rev3 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_bemeier_bmek_rev3_default/keyboards/bemeier/bmek/bmek.lst, -adhlns=.build/obj_bemeier_bmek_rev3_default/keyboards/bemeier/bmek/rev3/rev3.lst, dropping all -Xassembler and -Wa options. | Making bfake with keymap default [OK] Making bigseries/1key with keymap default [OK] Making bigseries/2key with keymap default [OK] Making bigseries/3key with keymap default [OK] Making bigseries/4key with keymap default [OK] Making binepad/bn003 with keymap default [OK] Making bioi/g60ble with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_bioi_g60ble_default/keyboards/bioi/g60ble/keymaps/default/keymap.lst, -adhlns=.build/obj_bioi_g60ble_default/quantum/quantum.lst, dropping all -Xassembler and -Wa options. | Making blackplum with keymap default [OK] Making blockey with keymap default [OK] Making bm16a with keymap default [OK] Making bm16s with keymap default [OK] Making bm40hsrgb with keymap default [OK] Making bm43a with keymap default [OK] Making bm60poker with keymap default [OK] Making bm60rgb with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_bm60rgb_default/keyboards/bm60rgb/bm60rgb.lst, -adhlns=.build/obj_bm60rgb_default/keyboards/bm60rgb/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making bm60rgb_iso with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_bm60rgb_iso_default/keyboards/bm60rgb_iso/bm60rgb_iso.lst, -adhlns=.build/obj_bm60rgb_iso_default/keyboards/bm60rgb_iso/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making boardsource/3x4 with keymap default [OK] Making boardsource/4x12 with keymap default [OK] Making boardsource/5x12 with keymap default [OK] Making boardsource/holiday/spooky with keymap default [OK] Making boardsource/microdox with keymap default [OK] Making boardwalk with keymap default [OK] Making boston_meetup/2019 with keymap default [ERRORS] drivers/haptic/DRV2605L.c: In function 'DRV_read': drivers/haptic/DRV2605L.c:36:59: error: array subscript 0 is outside array bounds of 'uint8_t[0]' {aka 'unsigned char[]'} [-Werror=array-bounds] 36 | DRV2605L_read_register = (uint8_t)DRV2605L_read_buffer[0]; | ~~~~~~~~~~~~~~~~~~~~^~~ drivers/haptic/DRV2605L.c:25:9: note: while referencing 'DRV2605L_read_buffer' 25 | uint8_t DRV2605L_read_buffer[0]; | ^~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors | | | make[1]: *** [tmk_core/rules.mk:388: .build/obj_boston_meetup_2019_default/DRV2605L.o] Error 1 make[1]: *** Se espera a que terminen otras tareas.... Making botanicalkeyboards/fm2u with keymap default [OK] Making bpiphany/frosty_flake with keymap default [OK] Making bpiphany/kitten_paw with keymap default [OK] Making bpiphany/pegasushoof/2013 with keymap default [OK] Making bpiphany/pegasushoof/2015 with keymap default [OK] Making bpiphany/sixshooter with keymap default [OK] Making bpiphany/tiger_lily with keymap default [OK] Making bpiphany/unloved_bastard with keymap default [OK] Making bthlabs/geekpad with keymap default [OK] Making business_card/alpha with keymap default [OK] Making business_card/beta with keymap default [OK] Making butterstick with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_butterstick_default/sten.lst, -adhlns=.build/obj_butterstick_default/keyboards/butterstick/butterstick.lst, dropping all -Xassembler and -Wa options. | Making c39 with keymap default [OK] Making cannonkeys/an_c with keymap default [OK] Making cannonkeys/atlas with keymap default [OK] Making cannonkeys/chimera65 with keymap default [OK] Making cannonkeys/db60 with keymap default [OK] Making cannonkeys/devastatingtkl with keymap default [OK] Making cannonkeys/instant60 with keymap default [OK] Making cannonkeys/instant65 with keymap default [OK] Making cannonkeys/iron165 with keymap default [OK] Making cannonkeys/obliterated75 with keymap default [OK] Making cannonkeys/ortho48 with keymap default [OK] Making cannonkeys/ortho60 with keymap default [OK] Making cannonkeys/ortho75 with keymap default [OK] Making cannonkeys/practice60 with keymap default [OK] Making cannonkeys/practice65 with keymap default [OK] Making cannonkeys/rekt1800 with keymap default [OK] Making cannonkeys/satisfaction75/prototype with keymap default [OK] Making cannonkeys/satisfaction75/rev1 with keymap default [OK] Making cannonkeys/savage65 with keymap default [OK] Making cannonkeys/tmov2 with keymap default [OK] Making catch22 with keymap default [OK] Making centromere with keymap default [OK] Making chavdai40/rev1 with keymap default [OK] Making chavdai40/rev2 with keymap default [OK] Making cheshire/curiosity with keymap default [OK] Making chidori with keymap default [OK] Making chili with keymap default [OK] Making chimera_ergo with keymap default [OK] Making chimera_ls with keymap default [OK] Making chimera_ortho with keymap default [OK] Making chimera_ortho_plus with keymap default [OK] Making choc_taro with keymap default [OK] Making choco60 with keymap default [OK] Making christmas_tree/V2017 with keymap default [WARNINGS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ Making ckeys/handwire_101 with keymap default [OK] Making ckeys/nakey with keymap default [OK] Making ckeys/obelus with keymap default [OK] Making ckeys/thedora with keymap default [OK] Making ckeys/washington with keymap default [OK] Making claw44/rev1 with keymap default [OK] Making clawsome/bookerboard with keymap default [OK] Making clawsome/coupe with keymap default [OK] Making clawsome/fightpad with keymap default [OK] Making clawsome/gamebuddy with keymap default [OK] Making clawsome/numeros with keymap default [OK] Making clawsome/sedan with keymap default [OK] Making clawsome/sidekick with keymap default [OK] Making clueboard/17 with keymap default [OK] Making clueboard/2x1800/2018 with keymap default [OK] Making clueboard/2x1800/2019 with keymap default [OK] Making clueboard/60 with keymap default [OK] Making clueboard/66_hotswap/gen1 with keymap default [OK] Making clueboard/66_hotswap/prototype with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_clueboard_66_hotswap_prototype_default/keyboards/clueboard/66_hotswap/66_hotswap.lst, -adhlns=.build/obj_clueboard_66_hotswap_prototype_default/keyboards/clueboard/66_hotswap/prototype/prototype.lst, dropping all -Xassembler and -Wa options. | Making clueboard/66/rev1 with keymap default [OK] Making clueboard/66/rev2 with keymap default [WARNINGS] * The firmware size is approaching the maximum - 28234/28672 (98%, 438 bytes free) Making clueboard/66/rev3 with keymap default [WARNINGS] * The firmware size is approaching the maximum - 28226/28672 (98%, 446 bytes free) Making clueboard/66/rev4 with keymap default [OK] Making clueboard/california with keymap default [OK] Making clueboard/card with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_clueboard_card_default/keyboards/clueboard/card/card.lst, -adhlns=.build/obj_clueboard_card_default/keyboards/clueboard/card/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making cocoa40 with keymap default [OK] Making comet46 with keymap default [OK] Making contra with keymap default [OK] Making converter/adb_usb with keymap default [OK] Making converter/hp_46010a with keymap default [OK] Making converter/ibm_5291 with keymap default [OK] Making converter/ibm_terminal with keymap default [OK] Making converter/m0110_usb with keymap default [OK] Making converter/modelm101 with keymap default [OK] Making converter/numeric_keypad_IIe with keymap default [OK] Making converter/palm_usb/stowaway with keymap default [OK] Making converter/siemens_tastatur with keymap default [OK] Making converter/sun_usb/type3 with keymap default [OK] Making converter/sun_usb/type5 with keymap default [OK] Making converter/usb_usb/ble with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_converter_usb_usb_ble_default/custom_matrix.lst, -adhlns=.build/obj_converter_usb_usb_ble_default/keyboards/converter/usb_usb/usb_usb.lst, dropping all -Xassembler and -Wa options. | Making converter/usb_usb/hasu with keymap default [OK] Making converter/usb_usb/pro_micro with keymap default [OK] Making converter/xt_usb with keymap default [OK] Making copenhagen_click/click_pad_v1 with keymap default [OK] Making coseyfannitutti/discipad with keymap default [OK] Making coseyfannitutti/discipline with keymap default [OK] Making coseyfannitutti/mullet with keymap default [OK] Making coseyfannitutti/mulletpad with keymap default [OK] Making coseyfannitutti/mysterium with keymap default [OK] Making coseyfannitutti/romeo with keymap default [OK] Making cospad with keymap default [WARNINGS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ Making craftwalk with keymap default [OK] Making crawlpad with keymap default [OK] Making crkbd/rev1/common with keymap default [OK] Making crkbd/rev1/legacy with keymap default [OK] Making cu24 with keymap default [OK] Making cu75 with keymap default [OK] Making cu80 with keymap default [OK] Making cutie_club/wraith with keymap default [OK] Making daisy with keymap default [WARNINGS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ Making db/db63 with keymap default [OK] Making dc01/arrow with keymap default [OK] Making dc01/left with keymap default [OK] Making dc01/numpad with keymap default [OK] Making dc01/right with keymap default [OK] Making deltasplit75/v2 with keymap default [OK] Making dichotomy with keymap default [OK] Making diverge3 with keymap default [OK] Making divergetm2 with keymap default [OK] Making dk60 with keymap default [OK] Making dm9records/ergoinu with keymap default [OK] Making dm9records/plaid with keymap default [OK] Making dm9records/tartan with keymap default [OK] Making dmqdesign/spin with keymap default [OK] Making do60 with keymap default [OK] Making donutcables/budget96 with keymap default [OK] Making donutcables/scrabblepad with keymap default [OK] Making doodboard/duckboard with keymap default [OK] Making doppelganger with keymap default [OK] Making doro67/multi with keymap default [OK] Making doro67/regular with keymap default [OK] Making doro67/rgb with keymap default [OK] Making dozen0 with keymap default [OK] Making dp60 with keymap default [OK] Making draytronics/scarlet with keymap default [OK] Making duck/eagle_viper/v2 with keymap default [OK] Making duck/jetfire with keymap default [OK] Making duck/lightsaver with keymap default [OK] Making duck/octagon/v1 with keymap default [OK] Making duck/octagon/v2 with keymap default [OK] Making duck/orion/v3 with keymap default [OK] Making duck/tcv3 with keymap default [OK] Making dumbo with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_dumbo_default/keyboards/dumbo/dumbo.lst, -adhlns=.build/obj_dumbo_default/keyboards/dumbo/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making dumbpad with keymap default [OK] Making dz60 with keymap default [OK] Making dztech/bocc with keymap default [OK] Making dztech/dz60rgb_ansi/v1 with keymap default [OK] Making dztech/dz60rgb_ansi/v2 with keymap default [OK] Making dztech/dz60rgb/v1 with keymap default [OK] Making dztech/dz60rgb/v2 with keymap default [OK] Making dztech/dz60rgb_wkl/v1 with keymap default [OK] Making dztech/dz60rgb_wkl/v2 with keymap default [OK] Making dztech/dz65rgb/v1 with keymap default [OK] Making dztech/dz65rgb/v2 with keymap default [OK] Making dztech/volcano660 with keymap default [OK] Making e88 with keymap default [OK] Making eco/rev1 with keymap default [OK] Making eco/rev2 with keymap default [OK] Making efreet with keymap default [WARNINGS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ Making emajesty/eiri with keymap default [OK] Making emptystring/NQG with keymap default [OK] Making eniigmakeyboards/ek65 with keymap default [OK] Making eniigmakeyboards/ek87 with keymap default [OK] Making ep/40 with keymap default [OK] Making ep/96 with keymap default [OK] Making ep/comsn/hs68 with keymap default [OK] Making ep/comsn/mollydooker with keymap default [OK] Making ep/comsn/tf_longeboye with keymap default [OK] Making ergo42/rev1 with keymap default [OK] Making ergodash/mini with keymap default [OK] Making ergodash/rev1 with keymap default [OK] Making ergodone with keymap default [OK] Making ergodox_ez with keymap default [OK] Making ergodox_ez/glow with keymap default [OK] Making ergodox_ez/shine with keymap default [OK] Making ergodox_infinity with keymap default [OK] Making ergodox_stm32 with keymap default [OK] Making ergosaurus with keymap default [OK] Making ergoslab/rev1 with keymap default [OK] Making ergotaco with keymap default [OK] Making ergotravel/rev1 with keymap default [OK] Making ericrlau/numdiscipline/rev1 with keymap default [OK] Making espectro with keymap default [OK] Making eve/meteor with keymap default [OK] Making evil80 with keymap default [OK] Making exclusive/e65 with keymap default [OK] Making exclusive/e6_rgb with keymap default [OK] Making exclusive/e6v2/le with keymap default [OK] Making exclusive/e6v2/le_bmc with keymap default [OK] Making exclusive/e6v2/oe with keymap default [OK] Making exclusive/e6v2/oe_bmc with keymap default [OK] Making exclusive/e7v1 with keymap default [OK] Making exclusive/e7v1se with keymap default [OK] Making exclusive/e85/hotswap with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_exclusive_e85_hotswap_default/keyboards/exclusive/e85/hotswap/hotswap.lst, -adhlns=.build/obj_exclusive_e85_hotswap_default/keyboards/exclusive/e85/hotswap/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making exclusive/e85/soldered with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_exclusive_e85_soldered_default/keyboards/exclusive/e85/soldered/soldered.lst, -adhlns=.build/obj_exclusive_e85_soldered_default/keyboards/exclusive/e85/soldered/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making exent with keymap default [OK] Making facew with keymap default [OK] Making fallacy with keymap default [OK] Making fc660c with keymap default [OK] Making fc980c with keymap default [OK] Making felix with keymap default [OK] Making ferris/0_1 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_ferris_0_1_default/matrix.lst, -adhlns=.build/obj_ferris_0_1_default/keyboards/ferris/0_1/0_1.lst, dropping all -Xassembler and -Wa options. | Making ferris/sweep with keymap default [OK] Making fjlabs/bolsa65 with keymap default [OK] Making flehrad/bigswitch with keymap default [OK] Making flehrad/downbubble with keymap default [OK] Making flehrad/numbrero with keymap default [OK] Making flehrad/snagpad with keymap default [OK] Making flehrad/tradestation with keymap default [OK] Making fleuron with keymap default [OK] Making fluorite with keymap default [OK] Making flx/lodestone with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_flx_lodestone_default/keyboards/flx/lodestone/lodestone.lst, -adhlns=.build/obj_flx_lodestone_default/keyboards/flx/lodestone/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making flx/virgo with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_flx_virgo_default/keyboards/flx/virgo/virgo.lst, -adhlns=.build/obj_flx_virgo_default/keyboards/flx/virgo/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making for_science with keymap default [OK] Making fortitude60/rev1 with keymap default [OK] Making four_banger with keymap default [OK] Making foxlab/key65/hotswap with keymap default [OK] Making foxlab/key65/universal with keymap default [OK] Making foxlab/leaf60/hotswap with keymap default [OK] Making foxlab/leaf60/universal with keymap default [OK] Making fractal with keymap default [OK] Making freyr with keymap default [OK] Making ft/mars80 with keymap default [OK] Making function96 with keymap default [OK] Making funky40 with keymap default [OK] Making gami_studio/lex60 with keymap default [OK] Making geekboards/tester with keymap default [OK] Making generic_panda/panda65_01 with keymap default [OK] Making georgi with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_georgi_default/matrix.lst, -adhlns=.build/obj_georgi_default/i2c_master.lst, dropping all -Xassembler and -Wa options. | Making gergo with keymap default [ERRORS] keyboards/gergo/matrix.c: In function 'unselect_rows': keyboards/gergo/matrix.c:354:14: error: overflow in conversion from 'int' to 'uint8_t' {aka 'volatile unsigned char'} changes value from '(int)*36 & -256' to '0' [-Werror=overflow] 354 | DDRB &= ~(BMASK | TRKMASK); | ^ cc1: all warnings being treated as errors | | | make[1]: *** [tmk_core/rules.mk:388: .build/obj_gergo_default/matrix.o] Error 1 make[1]: *** Se espera a que terminen otras tareas.... Making getta25/rev1 with keymap default [OK] Making gh60/revc with keymap default [OK] Making gh60/satan with keymap default [OK] Making gh60/v1p3 with keymap default [OK] Making gh80_3000 with keymap default [OK] Making ghs/rar with keymap default [OK] Making gingham with keymap default [OK] Making gon/nerd60 with keymap default [OK] Making gon/nerdtkl with keymap default [OK] Making gowla with keymap default [OK] Making gray_studio/cod67 with keymap default [WARNINGS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ Making gray_studio/hb85 with keymap default [OK] Making gray_studio/space65 with keymap default [OK] Making gray_studio/think65/hotswap with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_gray_studio_think65_hotswap_default/keyboards/gray_studio/think65/hotswap/hotswap.lst, -adhlns=.build/obj_gray_studio_think65_hotswap_default/keyboards/gray_studio/think65/hotswap/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making gray_studio/think65/solder with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_gray_studio_think65_solder_default/keyboards/gray_studio/think65/solder/solder.lst, -adhlns=.build/obj_gray_studio_think65_solder_default/keyboards/gray_studio/think65/solder/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making grid600/press with keymap default [OK] Making gskt00 with keymap default [OK] Making hadron/ver2 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_hadron_ver2_default/i2c.lst, -adhlns=.build/obj_hadron_ver2_default/ssd1306.lst, dropping all -Xassembler and -Wa options. | Making hadron/ver3 with keymap default [ERRORS] drivers/haptic/DRV2605L.c: In function 'DRV_read': drivers/haptic/DRV2605L.c:36:59: error: array subscript 0 is outside array bounds of 'uint8_t[0]' {aka 'unsigned char[]'} [-Werror=array-bounds] 36 | DRV2605L_read_register = (uint8_t)DRV2605L_read_buffer[0]; | ~~~~~~~~~~~~~~~~~~~~^~~ drivers/haptic/DRV2605L.c:25:9: note: while referencing 'DRV2605L_read_buffer' 25 | uint8_t DRV2605L_read_buffer[0]; | ^~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors | | | make[1]: *** [tmk_core/rules.mk:391: .build/obj_hadron_ver3_default/DRV2605L.o] Error 1 make[1]: *** Se espera a que terminen otras tareas.... Making halberd with keymap default [OK] Making handwired/108key_trackpoint with keymap default [OK] Making handwired/2x5keypad with keymap default [OK] Making handwired/3dp660 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_handwired_3dp660_default/keyboards/handwired/3dp660/3dp660.lst, -adhlns=.build/obj_handwired_3dp660_default/keyboards/handwired/3dp660/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making handwired/412_64 with keymap default [OK] Making handwired/42 with keymap default [WARNINGS] NKRO is not currently supported with Bluetooth, and has been disabled. Making handwired/6macro with keymap default [OK] Making handwired/aek64 with keymap default [OK] Making handwired/aplx2 with keymap default [OK] Making handwired/aranck with keymap default [OK] Making handwired/arrow_pad with keymap default [OK] Making handwired/atreus50 with keymap default [OK] Making handwired/bdn9_ble with keymap default [WARNINGS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ Making handwired/bento/rev1 with keymap default [OK] Making handwired/bluepill/bluepill70 with keymap default [OK] Making handwired/boss566y/redragon_vara with keymap default [OK] Making handwired/brain with keymap default [OK] Making handwired/cans12er with keymap default [OK] Making handwired/chiron with keymap default [OK] Making handwired/ck4x4 with keymap default [OK] Making handwired/cmd60 with keymap default [OK] Making handwired/co60/rev1 with keymap default [OK] Making handwired/co60/rev6 with keymap default [OK] Making handwired/co60/rev7 with keymap default [OK] Making handwired/colorlice with keymap default [OK] Making handwired/curiosity with keymap default [OK] Making handwired/d48 with keymap default [OK] Making handwired/dactyl with keymap default [OK] Making handwired/dactyl_left with keymap default [OK] Making handwired/dactyl_manuform/4x5 with keymap default [OK] Making handwired/dactyl_manuform/4x6 with keymap default [OK] Making handwired/dactyl_manuform/5x6_5 with keymap default [OK] Making handwired/dactyl_manuform/5x6 with keymap default [OK] Making handwired/dactyl_manuform/5x7 with keymap default [OK] Making handwired/dactyl_manuform/6x6 with keymap default [OK] Making handwired/dactyl_manuform/dmote/62key with keymap default [OK] Making handwired/dactyl_promicro with keymap default [OK] Making handwired/daishi with keymap default [OK] Making handwired/datahand with keymap default [OK] Making handwired/ddg_56 with keymap default [OK] Making handwired/eagleii with keymap default [OK] Making handwired/fc200rt_qmk with keymap default [OK] Making handwired/fivethirteen with keymap default [OK] Making handwired/floorboard with keymap default [OK] Making handwired/frenchdev with keymap default [OK] Making handwired/fruity60 with keymap default [OK] Making handwired/gamenum with keymap default [OK] Making handwired/hacked_motospeed with keymap default [OK] Making handwired/heisenberg with keymap default [ERRORS] * The firmware is too large! 28694/28672 (22 bytes over) make[1]: *** [tmk_core/rules.mk:422: check-size] Error 1 Making handwired/hexon38 with keymap default [OK] Making handwired/hnah108 with keymap default [OK] Making handwired/hnah40 with keymap default [OK] Making handwired/hnah40rgb with keymap default [OK] Making handwired/ibm122m with keymap default [OK] Making handwired/jn68m with keymap default [OK] Making handwired/jopr with keymap default [OK] Making handwired/jot50 with keymap default [OK] Making handwired/jotanck with keymap default [OK] Making handwired/jotpad16 with keymap default [OK] Making handwired/jtallbean/split_65 with keymap default [OK] Making handwired/juliet with keymap default [OK] Making handwired/k8split with keymap default [OK] Making handwired/k_numpad17 with keymap default [OK] Making handwired/kbod with keymap default [OK] Making handwired/ks63 with keymap default [OK] Making handwired/leftynumpad with keymap default [OK] Making handwired/lovelive9 with keymap default [OK] Making handwired/maartenwut with keymap default [OK] Making handwired/magicforce61 with keymap default [OK] Making handwired/magicforce68 with keymap default [OK] Making handwired/mechboards_micropad with keymap default [OK] Making handwired/minorca with keymap default [OK] Making handwired/ms_sculpt_mobile with keymap default [OK] Making handwired/myskeeb with keymap default [OK] Making handwired/nicekey with keymap default [OK] Making handwired/not_so_minidox with keymap default [OK] Making handwired/novem with keymap default [OK] Making handwired/numpad20 with keymap default [OK] Making handwired/obuwunkunubi/spaget with keymap default [OK] Making handwired/onekey/blackpill_f401 with keymap default [OK] Making handwired/onekey/blackpill_f411 with keymap default [OK] Making handwired/onekey/bluepill with keymap default [OK] Making handwired/onekey/elite_c with keymap default [OK] Making handwired/onekey/promicro with keymap default [OK] Making handwired/onekey/proton_c with keymap default [OK] Making handwired/onekey/pytest with keymap default [OK] Making handwired/onekey/stm32f0_disco with keymap default [OK] Making handwired/onekey/teensy_2 with keymap default [OK] Making handwired/onekey/teensy_2pp with keymap default [OK] Making handwired/onekey/teensy_32 with keymap default [OK] Making handwired/onekey/teensy_lc with keymap default [ERRORS] tmk_core/common/chibios/eeprom_teensy.c: In function 'eeprom_initialize': tmk_core/common/chibios/eeprom_teensy.c:366:71: error: array subscript 0 is outside array bounds of 'uint32_t[1]' {aka 'long unsigned int[1]'} [-Werror=array-bounds] 366 | flashend = (uint32_t)((uint16_t *)SYMVAL(__eeprom_workarea_end__) - 1); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~ tmk_core/common/chibios/eeprom_teensy.c:351:17: note: while referencing '__eeprom_workarea_end__' 351 | extern uint32_t __eeprom_workarea_end__; | ^~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors | | | make[1]: *** [tmk_core/rules.mk:391: .build/obj_handwired_onekey_teensy_lc_default/common/chibios/eeprom_teensy.o] Error 1 make[1]: *** Se espera a que terminen otras tareas.... Making handwired/ortho5x13 with keymap default [OK] Making handwired/owlet60 with keymap default [OK] Making handwired/p1800fl with keymap default [OK] Making handwired/p65rgb with keymap default [WARNINGS] * The firmware size is approaching the maximum - 27790/28672 (96%, 882 bytes free) Making handwired/pilcrow with keymap default [OK] Making handwired/postageboard/mini with keymap default [OK] Making handwired/postageboard/r1 with keymap default [OK] Making handwired/prime_exl with keymap default [OK] Making handwired/prime_exl_plus with keymap default [OK] Making handwired/prkl30/feather with keymap default [WARNINGS] NKRO is not currently supported with Bluetooth, and has been disabled. Making handwired/prkl30/promicro with keymap default [OK] Making handwired/promethium with keymap default [WARNINGS] NKRO is not currently supported with Bluetooth, and has been disabled. | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_handwired_promethium_default/ws2812.lst, -adhlns=.build/obj_handwired_promethium_default/rgbsps.lst, dropping all -Xassembler and -Wa options. | Making handwired/pterodactyl with keymap default [WARNINGS] NKRO is not currently supported with Bluetooth, and has been disabled. Making handwired/pteron38 with keymap default [OK] Making handwired/pteron with keymap default [OK] Making handwired/qc60/proto with keymap default [OK] Making handwired/reddot with keymap default [OK] Making handwired/retro_refit with keymap default [OK] Making handwired/riblee_f401 with keymap default [OK] Making handwired/rs60 with keymap default [OK] Making handwired/selene with keymap default [OK] Making handwired/sick68 with keymap default [OK] Making handwired/sick_pad with keymap default [OK] Making handwired/slash with keymap default [OK] Making handwired/space_oddity with keymap default [OK] Making handwired/splittest/promicro with keymap default [OK] Making handwired/splittest/teensy_2 with keymap default [OK] Making handwired/steamvan/rev1 with keymap default [OK] Making handwired/sticc14 with keymap default [OK] Making handwired/stream_cheap/2x3 with keymap default [OK] Making handwired/stream_cheap/2x4 with keymap default [OK] Making handwired/stream_cheap/2x5 with keymap default [OK] Making handwired/swiftrax/astro65 with keymap default [OK] Making handwired/swiftrax/cowfish with keymap default [OK] Making handwired/swiftrax/pandamic with keymap default [OK] Making handwired/swiftrax/retropad with keymap default [OK] Making handwired/symmetry60 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_handwired_symmetry60_default/keyboards/handwired/symmetry60/symmetry60.lst, -adhlns=.build/obj_handwired_symmetry60_default/keyboards/handwired/symmetry60/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making handwired/t111 with keymap default [OK] Making handwired/tennie with keymap default [OK] Making handwired/terminus_mini with keymap default [OK] Making handwired/trackpoint with keymap default [OK] Making handwired/traveller with keymap default [OK] Making handwired/tritium_numpad with keymap default [OK] Making handwired/twadlee/tp69 with keymap default [ERRORS] tmk_core/common/chibios/eeprom_teensy.c: In function 'eeprom_initialize': tmk_core/common/chibios/eeprom_teensy.c:366:71: error: array subscript 0 is outside array bounds of 'uint32_t[1]' {aka 'long unsigned int[1]'} [-Werror=array-bounds] 366 | flashend = (uint32_t)((uint16_t *)SYMVAL(__eeprom_workarea_end__) - 1); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~ tmk_core/common/chibios/eeprom_teensy.c:351:17: note: while referencing '__eeprom_workarea_end__' 351 | extern uint32_t __eeprom_workarea_end__; | ^~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors | | | make[1]: *** [tmk_core/rules.mk:388: .build/obj_handwired_twadlee_tp69_default/common/chibios/eeprom_teensy.o] Error 1 make[1]: *** Se espera a que terminen otras tareas.... Making handwired/unk/rev1 with keymap default [OK] Making handwired/videowriter with keymap default [OK] Making handwired/wabi with keymap default [OK] Making handwired/woodpad with keymap default [OK] Making handwired/wulkan with keymap default [OK] Making handwired/xealous/rev1 with keymap default [OK] Making handwired/xealousbrown with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_handwired_xealousbrown_default/matrix.lst, -adhlns=.build/obj_handwired_xealousbrown_default/keyboards/handwired/xealousbrown/xealousbrown.lst, dropping all -Xassembler and -Wa options. | Making handwired/z150 with keymap default [OK] Making handwired/zergo with keymap default [OK] Making hardlineworks/otd_plus with keymap default [OK] Making hecomi/alpha with keymap default [OK] Making heliar/wm1_hotswap with keymap default [OK] Making helix/pico with keymap default [OK] Making helix/pico/back with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_helix_pico_back_default/pico/matrix.lst, -adhlns=.build/obj_helix_pico_back_default/pico/split_util.lst, dropping all -Xassembler and -Wa options. | Making helix/pico/sc with keymap default [OK] Making helix/pico/sc/back with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_helix_pico_sc_back_default/keyboards/helix/helix.lst, -adhlns=.build/obj_helix_pico_sc_back_default/keyboards/helix/pico/pico.lst, dropping all -Xassembler and -Wa options. | Making helix/pico/sc/under with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_helix_pico_sc_under_default/keyboards/helix/helix.lst, -adhlns=.build/obj_helix_pico_sc_under_default/keyboards/helix/pico/pico.lst, dropping all -Xassembler and -Wa options. | Making helix/pico/under with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_helix_pico_under_default/pico/matrix.lst, -adhlns=.build/obj_helix_pico_under_default/pico/split_util.lst, dropping all -Xassembler and -Wa options. | Making helix/rev1 with keymap default [OK] Making helix/rev2 with keymap default [OK] Making helix/rev2/back with keymap default [OK] Making helix/rev2/back/oled with keymap default [OK] Making helix/rev2/oled with keymap default [OK] Making helix/rev2/oled/back with keymap default [OK] Making helix/rev2/oled/under with keymap default [OK] Making helix/rev2/sc with keymap default [OK] Making helix/rev2/sc/back with keymap default [OK] Making helix/rev2/sc/oled with keymap default [OK] Making helix/rev2/sc/oledback with keymap default [OK] Making helix/rev2/sc/oledunder with keymap default [OK] Making helix/rev2/sc/under with keymap default [OK] Making helix/rev2/under with keymap default [OK] Making helix/rev2/under/oled with keymap default [OK] Making helix/rev3_4rows with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_helix_rev3_4rows_default/oled_display.lst, -adhlns=.build/obj_helix_rev3_4rows_default/keyboards/helix/helix.lst, dropping all -Xassembler and -Wa options. | Making helix/rev3_5rows with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_helix_rev3_5rows_default/oled_display.lst, -adhlns=.build/obj_helix_rev3_5rows_default/keyboards/helix/helix.lst, dropping all -Xassembler and -Wa options. | Making hhkb/ansi with keymap default [OK] Making hhkb/jp with keymap default [OK] Making hhkb_lite_2 with keymap default [OK] Making hid_liber with keymap default [OK] Making hifumi with keymap default [OK] Making hineybush/h10 with keymap default [OK] Making hineybush/h60 with keymap default [OK] Making hineybush/h75_singa with keymap default [OK] Making hineybush/h87a with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_hineybush_h87a_default/keyboards/hineybush/h87a/h87a.lst, -adhlns=.build/obj_hineybush_h87a_default/keyboards/hineybush/h87a/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making hineybush/h88 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_hineybush_h88_default/keyboards/hineybush/h88/h88.lst, -adhlns=.build/obj_hineybush_h88_default/keyboards/hineybush/h88/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making hineybush/hbcp with keymap default [OK] Making hineybush/hineyg80 with keymap default [OK] Making hineybush/physix with keymap default [OK] Making hineybush/sm68 with keymap default [OK] Making holyswitch/southpaw75 with keymap default [OK] Making honeycomb with keymap default [OK] Making hotdox with keymap default [OK] Making hs60/v1 with keymap default [OK] Making hs60/v2/ansi with keymap default [OK] Making hs60/v2/hhkb with keymap default [OK] Making hs60/v2/iso with keymap default [OK] Making hub16 with keymap default [OK] Making id80 with keymap default [OK] Making id87 with keymap default [OK] Making idb/idb_60 with keymap default [ERRORS] | | /usr/bin/avr-ld: .build/obj_idb_idb_60_default/keyboards/idb/idb_60/keymaps/default/keymap.o: en la función `layer_state_set_user': | /home/elodin/qmk_firmware/keyboards/idb/idb_60/keymaps/default/keymap.c:40: referencia a `_idb_60_fn_led_on' sin definir | /usr/bin/avr-ld: /home/elodin/qmk_firmware/keyboards/idb/idb_60/keymaps/default/keymap.c:42: referencia a `_idb_60_fn_led_off' sin definir | /usr/bin/avr-ld: .build/obj_idb_idb_60_default/keyboards/idb/idb_60/idb_60.o: en la función `led_set_kb': | /home/elodin/qmk_firmware/keyboards/idb/idb_60/idb_60.c:11: referencia a `_idb_60_caps_led_on' sin definir | /usr/bin/avr-ld: /home/elodin/qmk_firmware/keyboards/idb/idb_60/idb_60.c:13: referencia a `_idb_60_caps_led_off' sin definir | collect2: error: ld returned 1 exit status | make[1]: *** [tmk_core/rules.mk:311: .build/idb_idb_60_default.elf] Error 1 Making idobo with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_idobo_default/keyboards/idobo/idobo.lst, -adhlns=.build/obj_idobo_default/keyboards/idobo/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making illuminati/is0 with keymap default [OK] Making inett_studio/sqx/hotswap with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_inett_studio_sqx_hotswap_default/keyboards/inett_studio/sqx/hotswap/hotswap.lst, -adhlns=.build/obj_inett_studio_sqx_hotswap_default/keyboards/inett_studio/sqx/hotswap/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making inett_studio/sqx/universal with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_inett_studio_sqx_universal_default/keyboards/inett_studio/sqx/universal/universal.lst, -adhlns=.build/obj_inett_studio_sqx_universal_default/keyboards/inett_studio/sqx/universal/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making infinity60 with keymap default [OK] Making ivy/rev1 with keymap default [WARNINGS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ Making j80 with keymap default [OK] Making jae/j01 with keymap default [OK] Making jagdpietr/drakon with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_jagdpietr_drakon_default/keyboards/jagdpietr/drakon/drakon.lst, -adhlns=.build/obj_jagdpietr_drakon_default/keyboards/jagdpietr/drakon/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making jc65/v32a with keymap default [OK] Making jc65/v32u4 with keymap default [OK] Making jd40 with keymap default [OK] Making jd45 with keymap default [OK] Making jian/handwired with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_jian_handwired_default/keyboards/jian/jian.lst, -adhlns=.build/obj_jian_handwired_default/keyboards/jian/handwired/handwired.lst, dropping all -Xassembler and -Wa options. | Making jian/nsrev2 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_jian_nsrev2_default/keyboards/jian/jian.lst, -adhlns=.build/obj_jian_nsrev2_default/keyboards/jian/nsrev2/nsrev2.lst, dropping all -Xassembler and -Wa options. | Making jian/rev1 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_jian_rev1_default/keyboards/jian/jian.lst, -adhlns=.build/obj_jian_rev1_default/keyboards/jian/rev1/rev1.lst, dropping all -Xassembler and -Wa options. | Making jian/rev2 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_jian_rev2_default/keyboards/jian/jian.lst, -adhlns=.build/obj_jian_rev2_default/keyboards/jian/rev2/rev2.lst, dropping all -Xassembler and -Wa options. | Making jiran/rev1 with keymap default [OK] Making jiran/rev2 with keymap default [OK] Making jisplit89/rev1 with keymap default [OK] Making jj40 with keymap default [OK] Making jj4x4 with keymap default [OK] Making jj50 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_jj50_default/keyboards/jj50/jj50.lst, -adhlns=.build/obj_jj50_default/keyboards/jj50/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making jm60 with keymap default [OK] Making jnao with keymap default [WARNINGS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ Making just60 with keymap default [OK] Making k_type with keymap default [OK] Making kabedon/kabedon78s with keymap default [OK] Making kabedon/kabedon980 with keymap default [OK] Making kagamidget with keymap default [OK] Making kb_elmo/aek2_usb with keymap default [OK] Making kb_elmo/elmopad with keymap default [OK] Making kb_elmo/m0110a_usb with keymap default [OK] Making kb_elmo/m0116_usb with keymap default [OK] Making kb_elmo/sesame with keymap default [OK] Making kbdclack/kaishi65 with keymap default [OK] Making kbdfans/bella/soldered with keymap default [OK] Making kbdfans/kbd19x with keymap default [OK] Making kbdfans/kbd4x with keymap default [OK] Making kbdfans/kbd66 with keymap default [OK] Making kbdfans/kbd67/hotswap with keymap default [OK] Making kbdfans/kbd67/mkii_soldered with keymap default [OK] Making kbdfans/kbd67/mkiirgb/v1 with keymap default [OK] Making kbdfans/kbd67/mkiirgb/v2 with keymap default [OK] Making kbdfans/kbd67/rev1 with keymap default [WARNINGS] * The firmware size is approaching the maximum - 28420/28672 (99%, 252 bytes free) Making kbdfans/kbd67/rev2 with keymap default [WARNINGS] * The firmware size is approaching the maximum - 27728/28672 (96%, 944 bytes free) Making kbdfans/kbd6x with keymap default [OK] Making kbdfans/kbd75/rev1 with keymap default [OK] Making kbdfans/kbd75/rev2 with keymap default [OK] Making kbdfans/kbd8x with keymap default [ERRORS] * The firmware is too large! 29056/28672 (384 bytes over) make[1]: *** [tmk_core/rules.mk:422: check-size] Error 1 Making kbdfans/kbd8x_mk2 with keymap default [OK] Making kbdfans/kbdmini with keymap default [OK] Making kbdfans/kbdpad/mk1 with keymap default [OK] Making kbdfans/kbdpad_mk2 with keymap default [OK] Making kbdfans/maja with keymap default [OK] Making kbdfans/maja_soldered with keymap default [OK] Making kc60 with keymap default [OK] Making kc60se with keymap default [WARNINGS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ Making keebio/bdn9/rev1 with keymap default [WARNINGS] * The firmware size is approaching the maximum - 27672/28672 (96%, 1000 bytes free) Making keebio/bdn9/rev2 with keymap default [OK] Making keebio/bfo9000 with keymap default [OK] Making keebio/choconum with keymap default [OK] Making keebio/chocopad with keymap default [OK] Making keebio/dilly with keymap default [OK] Making keebio/ergodicity with keymap default [WARNINGS] * The firmware size is approaching the maximum - 27892/28672 (97%, 780 bytes free) Making keebio/fourier with keymap default [OK] Making keebio/iris/rev1 with keymap default [WARNINGS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ Making keebio/iris/rev1_led with keymap default [OK] Making keebio/iris/rev2 with keymap default [OK] Making keebio/iris/rev3 with keymap default [OK] Making keebio/iris/rev4 with keymap default [WARNINGS] * The firmware size is approaching the maximum - 27810/28672 (96%, 862 bytes free) Making keebio/kbo5000/rev1 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_keebio_kbo5000_rev1_default/keyboards/keebio/kbo5000/kbo5000.lst, -adhlns=.build/obj_keebio_kbo5000_rev1_default/keyboards/keebio/kbo5000/rev1/rev1.lst, dropping all -Xassembler and -Wa options. | Making keebio/laplace with keymap default [OK] Making keebio/levinson/rev1 with keymap default [OK] Making keebio/levinson/rev2 with keymap default [OK] Making keebio/levinson/rev3 with keymap default [OK] Making keebio/nyquist/rev1 with keymap default [OK] Making keebio/nyquist/rev2 with keymap default [OK] Making keebio/nyquist/rev3 with keymap default [OK] Making keebio/quefrency/rev1 with keymap default [OK] Making keebio/quefrency/rev2 with keymap default [OK] Making keebio/rorschach/rev1 with keymap default [OK] Making keebio/sinc/rev1 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_keebio_sinc_rev1_default/keyboards/keebio/sinc/sinc.lst, -adhlns=.build/obj_keebio_sinc_rev1_default/keyboards/keebio/sinc/rev1/rev1.lst, dropping all -Xassembler and -Wa options. | Making keebio/tragicforce68 with keymap default [OK] Making keebio/tukey with keymap default [OK] Making keebio/viterbi/rev1 with keymap default [OK] Making keebio/viterbi/rev2 with keymap default [WARNINGS] * The firmware size is approaching the maximum - 28166/28672 (98%, 506 bytes free) Making keebio/wavelet with keymap default [OK] Making keebwerk/nano_slider with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_keebwerk_nano_slider_default/analog.lst, -adhlns=.build/obj_keebwerk_nano_slider_default/keyboards/keebwerk/nano_slider/nano_slider.lst, dropping all -Xassembler and -Wa options. | Making keebzdotnet/wazowski with keymap default [OK] Making keybage/radpad with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_keybage_radpad_default/keyboards/keybage/radpad/radpad.lst, -adhlns=.build/obj_keybage_radpad_default/keyboards/keybage/radpad/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making keyboardio/atreus with keymap default [OK] Making keyboardio/model01 with keymap default [OK] Making keycapsss/o4l_5x12 with keymap default [OK] Making keycapsss/plaid_pad/rev1 with keymap default [OK] Making keycapsss/plaid_pad/rev2 with keymap default [OK] Making keyhive/maypad with keymap default [OK] Making kinesis/alvicstep with keymap default [OK] Making kinesis/kint2pp with keymap default [OK] Making kinesis/nguyenvietyen with keymap default [OK] Making kinesis/stapelberg with keymap default [OK] Making kingly_keys/little_foot with keymap default [OK] Making kingly_keys/romac with keymap default [OK] Making kingly_keys/romac_plus with keymap default [OK] Making kingly_keys/ropro with keymap default [OK] Making kingly_keys/smd_milk with keymap default [OK] Making kingly_keys/soap with keymap default [OK] Making kira75 with keymap default [WARNINGS] * The firmware size is approaching the maximum - 27922/28672 (97%, 750 bytes free) Making kira80 with keymap default [OK] Making kiwikeebs/macro with keymap default [OK] Making kmac with keymap default [OK] Making kmini with keymap default [OK] Making knops/mini with keymap default [OK] Making kona_classic with keymap default [OK] Making kudox/columner with keymap default [OK] Making kudox_game/rev1 with keymap default [OK] Making kudox_game/rev2 with keymap default [OK] Making kudox/rev1 with keymap default [OK] Making kudox/rev2 with keymap default [OK] Making kudox/rev3 with keymap default [OK] Making kv/revt with keymap default [OK] Making kyria/rev1 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_kyria_rev1_default/keyboards/kyria/kyria.lst, -adhlns=.build/obj_kyria_rev1_default/keyboards/kyria/rev1/rev1.lst, dropping all -Xassembler and -Wa options. | Making laptreus with keymap default [OK] Making latinpad with keymap default [OK] Making lattice60 with keymap default [OK] Making launchpad/rev1 with keymap default [OK] Making lazydesigners/bolt with keymap default [OK] Making lazydesigners/bolt/via with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_lazydesigners_bolt_via_default/keyboards/lazydesigners/bolt/bolt.lst, -adhlns=.build/obj_lazydesigners_bolt_via_default/keyboards/lazydesigners/bolt/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making lazydesigners/dimple with keymap default [OK] Making lazydesigners/the30 with keymap default [OK] Making lazydesigners/the50 with keymap default [OK] Making lazydesigners/the60 with keymap default [OK] Making le_chiffre with keymap default [OK] Making leeku/finger65 with keymap default [OK] Making lets_split_eh/eh with keymap default [OK] Making lets_split/rev1 with keymap default [OK] Making lets_split/rev2 with keymap default [OK] Making lets_split/sockets with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_lets_split_sockets_default/keyboards/lets_split/lets_split.lst, -adhlns=.build/obj_lets_split_sockets_default/keyboards/lets_split/sockets/sockets.lst, dropping all -Xassembler and -Wa options. | Making lfkeyboards/lfk65_hs with keymap default [OK] Making lfkeyboards/lfk78/revb with keymap default [OK] Making lfkeyboards/lfk78/revc with keymap default [OK] Making lfkeyboards/lfk78/revj with keymap default [OK] Making lfkeyboards/lfk87 with keymap default [OK] Making lfkeyboards/lfkpad with keymap default [OK] Making lfkeyboards/mini1800 with keymap default [OK] Making lfkeyboards/smk65/revb with keymap default [OK] Making lfkeyboards/smk65/revf with keymap default [OK] Making lily58/rev1 with keymap default [OK] Making longnald/corin with keymap default [OK] Making m10a with keymap default [OK] Making maartenwut/atom47/rev2 with keymap default [OK] Making maartenwut/atom47/rev3 with keymap default [OK] Making maartenwut/eon40 with keymap default [OK] Making maartenwut/eon65 with keymap default [OK] Making maartenwut/eon75 with keymap default [OK] Making maartenwut/eon87 with keymap default [OK] Making maartenwut/eon95 with keymap default [OK] Making maartenwut/gh80_1800 with keymap default [OK] Making maartenwut/gh80_3700 with keymap default [OK] Making maartenwut/minitomic with keymap default [OK] Making maartenwut/mx5160 with keymap default [OK] Making maartenwut/nt660 with keymap default [OK] Making maartenwut/omrontkl with keymap default [OK] Making maartenwut/plain60 with keymap default [OK] Making maartenwut/pockettype with keymap default [OK] Making maartenwut/quackfire with keymap default [OK] Making maartenwut/solheim68 with keymap default [OK] Making maartenwut/ta65 with keymap default [OK] Making maartenwut/wasdat with keymap default [OK] Making maartenwut/wasdat_code with keymap default [OK] Making maartenwut/wonderland with keymap default [WARNINGS] * The firmware size is approaching the maximum - 28210/28672 (98%, 462 bytes free) Making majistic with keymap default [OK] Making manta60 with keymap default [OK] Making marksard/leftover30 with keymap default [OK] Making marksard/rhymestone/rev1 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_marksard_rhymestone_rev1_default/./common/oled_helper.lst, -adhlns=.build/obj_marksard_rhymestone_rev1_default/keyboards/marksard/rhymestone/rev1/rev1.lst, dropping all -Xassembler and -Wa options. | Making massdrop/alt with keymap default [OK] Making massdrop/ctrl with keymap default [OK] Making masterworks/classy_tkl/rev_a with keymap default [OK] Making matrix/cain_re with keymap default [OK] Making matrix/m12og with keymap default [OK] Making matrix/m20add with keymap default [OK] Making matrix/noah with keymap default [OK] Making maxipad/promicro with keymap default [OK] Making maxipad/teensy2 with keymap default [OK] Making maxr1998/phoebe with keymap default [OK] Making maxr1998/pulse4k with keymap default [OK] Making mc_76k with keymap default [OK] Making mechkeys/mk60 with keymap default [OK] Making mechllama/g35/v1 with keymap default [OK] Making mechllama/g35/v2 with keymap default [OK] Making mechlovin/adelais/rgb_led/rev1 with keymap default [OK] Making mechlovin/adelais/rgb_led/rev2 with keymap default [OK] Making mechlovin/adelais/standard_led/rev2 with keymap default [OK] Making mechlovin/adelais/standard_led/rev3 with keymap default [OK] Making mechlovin/delphine/mono_led with keymap default [OK] Making mechlovin/delphine/rgb_led with keymap default [OK] Making mechlovin/hannah60rgb/rev1 with keymap default [OK] Making mechlovin/hannah60rgb/rev2 with keymap default [OK] Making mechlovin/hannah65/mechlovin9 with keymap default [OK] Making mechlovin/hannah65/rev1 with keymap default [OK] Making mechlovin/hannah910/rev1 with keymap default [OK] Making mechlovin/hannah910/rev2 with keymap default [OK] Making mechlovin/hannah910/rev3 with keymap default [OK] Making mechlovin/infinity87 with keymap default [OK] Making mechlovin/infinityce with keymap default [OK] Making mechlovin/kanu with keymap default [OK] Making mechlovin/pisces with keymap default [OK] Making mechmini/v1 with keymap default [OK] Making mechmini/v2 with keymap default [OK] Making mehkee96 with keymap default [OK] Making meira/featherble with keymap default [OK] Making meira/promicro with keymap default [OK] Making meishi2 with keymap default [OK] Making meishi with keymap default [OK] Making melgeek/mj61/rev1 with keymap default [OK] Making melgeek/mj63/rev1 with keymap default [OK] Making melgeek/mj64/rev1 with keymap default [OK] Making melgeek/mj64/rev2 with keymap default [OK] Making melgeek/mojo75/rev1 with keymap default [OK] Making melgeek/z70ultra/rev1 with keymap default [OK] Making melody96 with keymap default [OK] Making meme with keymap default [OK] Making meson with keymap default [OK] Making metamechs/timberwolf with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_metamechs_timberwolf_default/keyboards/metamechs/timberwolf/timberwolf.lst, -adhlns=.build/obj_metamechs_timberwolf_default/keyboards/metamechs/timberwolf/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making mexsistor/ludmila with keymap default [OK] Making miller/gm862 with keymap default [OK] Making miniaxe with keymap default [OK] Making minidox/rev1 with keymap default [OK] Making minimacro5 with keymap default [OK] Making mint60 with keymap default [OK] Making misterknife/knife66 with keymap default [OK] Making mitosis with keymap default [OK] Making miuni32 with keymap default [OK] Making mixi with keymap default [OK] Making montsinger/rebound/rev1 with keymap default [OK] Making montsinger/rebound/rev2 with keymap default [OK] Making montsinger/rebound/rev3 with keymap default [OK] Making montsinger/rebound/rev4 with keymap default [OK] Making montsinger/rewind with keymap default [OK] Making moon with keymap default [OK] Making moonlander with keymap default [OK] Making mountainblocks/mb17 with keymap default [OK] Making mschwingen/modelm/led_ffc with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_mschwingen_modelm_led_ffc_default/matrix.lst, -adhlns=.build/obj_mschwingen_modelm_led_ffc_default/keyboards/mschwingen/modelm/modelm.lst, dropping all -Xassembler and -Wa options. | Making mschwingen/modelm/led_wired with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_mschwingen_modelm_led_wired_default/matrix.lst, -adhlns=.build/obj_mschwingen_modelm_led_wired_default/keyboards/mschwingen/modelm/modelm.lst, dropping all -Xassembler and -Wa options. | Making mschwingen/modelm/led_ws2812 with keymap default [ERRORS] keyboards/mschwingen/modelm/modelm.c:51:19: error: 'lgreen' defined but not used [-Werror=unused-const-variable=] 51 | static const cRGB lgreen = {.r = 0, .g = DIM, .b = 0}; | ^~~~~~ cc1: all warnings being treated as errors | | | make[1]: *** [tmk_core/rules.mk:388: .build/obj_mschwingen_modelm_led_ws2812_default/keyboards/mschwingen/modelm/modelm.o] Error 1 make[1]: *** Se espera a que terminen otras tareas.... Making mt40 with keymap default [WARNINGS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ Making mt980 with keymap default [OK] Making murcielago/rev1 with keymap default [OK] Making mxss with keymap default [OK] Making mysticworks/wyvern with keymap default [OK] Making nafuda with keymap default [OK] Making naked48/rev1 with keymap default [OK] Making naked60/rev1 with keymap default [OK] Making naked64/rev1 with keymap default [OK] Making namecard2x4/rev1 with keymap default [OK] Making namecard2x4/rev2 with keymap default [OK] Making navi10/rev0 with keymap default [OK] Making navi10/rev2 with keymap default [OK] Making navi10/rev3 with keymap default [OK] Making ncc1701kb with keymap default [OK] Making nckiibs/flatbread60 with keymap default [OK] Making nckiibs/vaneela with keymap default [OK] Making nckiibs/vaneelaex with keymap default [OK] Making nebula12 with keymap default [OK] Making nebula68 with keymap default [OK] Making nek_type_a with keymap default [OK] Making nemui with keymap default [OK] Making newgame40 with keymap default [OK] Making nightly_boards/alter/rev1 with keymap default [OK] Making nightly_boards/n2 with keymap default [OK] Making nightly_boards/n87 with keymap default [WARNINGS] * The firmware size is approaching the maximum - 28620/28672 (99%, 52 bytes free) Making nightly_boards/ph_arisu with keymap default [OK] Making nightmare with keymap default [OK] Making niu_mini with keymap default [OK] Making nk65 with keymap default [OK] Making nk87 with keymap default [OK] Making nomu30/rev1 with keymap default [OK] Making nomu30/rev2 with keymap default [OK] Making novelpad with keymap default [OK] Making noxary/220 with keymap default [OK] Making noxary/260 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_noxary_260_default/keyboards/noxary/260/260.lst, -adhlns=.build/obj_noxary_260_default/keyboards/noxary/260/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making noxary/268_2 with keymap default [OK] Making noxary/268 with keymap default [OK] Making noxary/280 with keymap default [OK] Making noxary/x268 with keymap default [OK] Making numatreus with keymap default [OK] Making oddball with keymap default [OK] Making ogre/ergo_single with keymap default [OK] Making ogre/ergo_split with keymap default [OK] Making ok60 with keymap default [OK] Making omnikey_bh with keymap default [OK] Making omnikeyish with keymap default [OK] Making opendeck/32/rev1 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_opendeck_32_rev1_default/keyboards/opendeck/32/rev1/rev1.lst, -adhlns=.build/obj_opendeck_32_rev1_default/keyboards/opendeck/32/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making opus with keymap default [OK] Making orange75 with keymap default [OK] Making org60 with keymap default [WARNINGS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ Making ortho5by12 with keymap default [OK] Making orthodox/rev1 with keymap default [OK] Making orthodox/rev3 with keymap default [OK] Making orthodox/rev3_teensy with keymap default [OK] Making otaku_split/rev0 with keymap default [OK] Making otaku_split/rev1 with keymap default [OK] Making pabile/p18 with keymap default [OK] Making pabile/p20/ver1 with keymap default [OK] Making pabile/p20/ver2 with keymap default [OK] Making pabile/p40 with keymap default [OK] Making pabile/p40_ortho with keymap default [OK] Making pabile/p42 with keymap default [OK] Making paladin64 with keymap default [OK] Making palette1202 with keymap default [OK] Making panc40 with keymap default [OK] Making panc60 with keymap default [OK] Making pandora with keymap default [OK] Making pdxkbc with keymap default [OK] Making pearl with keymap default [OK] Making peiorisboards/ixora with keymap default [OK] Making percent/booster with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_percent_booster_default/keyboards/percent/booster/booster.lst, -adhlns=.build/obj_percent_booster_default/keyboards/percent/booster/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | * The firmware size is approaching the maximum - 27660/28672 (96%, 1012 bytes free) Making percent/canoe with keymap default [OK] Making percent/canoe_gen2 with keymap default [OK] Making percent/skog with keymap default [OK] Making percent/skog_lite with keymap default [OK] Making phantom with keymap default [OK] Making phoenix with keymap default [OK] Making pico/65keys with keymap default [OK] Making pico/70keys with keymap default [OK] Making pimentoso/paddino02/rev1 with keymap default [OK] Making pimentoso/paddino02/rev2/left with keymap default [OK] Making pimentoso/paddino02/rev2/right with keymap default [OK] Making pinky/3 with keymap default [OK] Making pinky/4 with keymap default [OK] Making pistachio with keymap default [OK] Making planck/ez with keymap default [OK] Making planck/ez/glow with keymap default [OK] Making planck/light with keymap default [OK] Making planck/rev1 with keymap default [OK] Making planck/rev2 with keymap default [OK] Making planck/rev3 with keymap default [OK] Making planck/rev4 with keymap default [ERRORS] * The firmware is too large! 29740/28672 (1068 bytes over) make[1]: *** [tmk_core/rules.mk:422: check-size] Error 1 Making planck/rev5 with keymap default [ERRORS] * The firmware is too large! 29744/28672 (1072 bytes over) make[1]: *** [tmk_core/rules.mk:422: check-size] Error 1 Making planck/rev6 with keymap default [OK] Making playkbtw/ca66 with keymap default [WARNINGS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ Making playkbtw/pk60 with keymap default [OK] Making plexus75 with keymap default [OK] Making ploopyco/mouse with keymap default [OK] Making ploopyco/trackball with keymap default [OK] Making plume/plume65 with keymap default [OK] Making pom_keyboards/tnln95 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_pom_keyboards_tnln95_default/keyboards/pom_keyboards/tnln95/tnln95.lst, -adhlns=.build/obj_pom_keyboards_tnln95_default/keyboards/pom_keyboards/tnln95/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making preonic/rev1 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_preonic_rev1_default/muse.lst, -adhlns=.build/obj_preonic_rev1_default/keyboards/preonic/preonic.lst, dropping all -Xassembler and -Wa options. | Making preonic/rev2 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_preonic_rev2_default/muse.lst, -adhlns=.build/obj_preonic_rev2_default/keyboards/preonic/preonic.lst, dropping all -Xassembler and -Wa options. | Making preonic/rev3 with keymap default [OK] Making primekb/meridian with keymap default [OK] Making primekb/prime_e/rgb with keymap default [OK] Making primekb/prime_e/std with keymap default [OK] Making primekb/prime_l/v1 with keymap default [OK] Making primekb/prime_l/v2 with keymap default [OK] Making primekb/prime_m with keymap default [OK] Making primekb/prime_o with keymap default [OK] Making primekb/prime_r with keymap default [OK] Making projectkb/alice/rev1 with keymap default [OK] Making projectkb/alice/rev2 with keymap default [OK] Making projectkb/signature87 with keymap default [OK] Making puck with keymap default [OK] Making punk75 with keymap default [OK] Making qaz with keymap default [OK] Making quad_h/lb75 with keymap default [OK] Making quantrik/kyuu with keymap default [OK] Making qwertyydox/rev1 with keymap default [OK] Making rabbit_capture_plan with keymap default [OK] Making rabbit/rabbit68 with keymap default [OK] Making ramonimbao/aelith with keymap default [OK] Making ramonimbao/herringbone with keymap default [OK] Making ramonimbao/mona with keymap default [OK] Making ramonimbao/squishy65 with keymap default [OK] Making ramonimbao/wete with keymap default [OK] Making rart/rart67 with keymap default [OK] Making rart/rart75 with keymap default [OK] Making rart/rartlice with keymap default [OK] Making rart/rartpad with keymap default [OK] Making redox/rev1 with keymap default [OK] Making redox_w with keymap default [OK] Making redscarf_i with keymap default [OK] Making redscarf_iiplus/verb with keymap default [OK] Making redscarf_iiplus/verc with keymap default [OK] Making redscarf_iiplus/verd with keymap default [OK] Making retro_75 with keymap default [OK] Making reversestudio/decadepad with keymap default [OK] Making reviung33 with keymap default [OK] Making reviung34 with keymap default [OK] Making reviung39 with keymap default [OK] Making reviung41 with keymap default [OK] Making reviung61 with keymap default [OK] Making rgbkb/sol/rev1 with keymap default [OK] Making rgbkb/sol/rev2 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_rgbkb_sol_rev2_default/keyboards/rgbkb/sol/sol.lst, -adhlns=.build/obj_rgbkb_sol_rev2_default/keyboards/rgbkb/sol/rev2/rev2.lst, dropping all -Xassembler and -Wa options. | Making rgbkb/zen/rev1 with keymap default [OK] Making rgbkb/zen/rev2 with keymap default [OK] Making rgbkb/zygomorph/rev1 with keymap default [OK] Making rominronin/katana60/rev1 with keymap default [OK] Making rominronin/katana60/rev2 with keymap default [OK] Making rotr with keymap default [OK] Making runner3680/3x6 with keymap default [OK] Making runner3680/3x7 with keymap default [OK] Making runner3680/3x8 with keymap default [OK] Making runner3680/4x6 with keymap default [OK] Making runner3680/4x7 with keymap default [OK] Making runner3680/4x8 with keymap default [OK] Making runner3680/5x6 with keymap default [OK] Making runner3680/5x7 with keymap default [OK] Making runner3680/5x8 with keymap default [OK] Making s7_elephant/rev1 with keymap default [OK] Making s7_elephant/rev2 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_s7_elephant_rev2_default/keyboards/s7_elephant/rev2/rev2.lst, -adhlns=.build/obj_s7_elephant_rev2_default/keyboards/s7_elephant/rev2/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making satt/vision with keymap default [OK] Making scarletbandana with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_scarletbandana_default/keyboards/scarletbandana/scarletbandana.lst, -adhlns=.build/obj_scarletbandana_default/keyboards/scarletbandana/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making sck/gtm with keymap default [OK] Making sck/m0116b with keymap default [OK] Making sck/neiso with keymap default [OK] Making sck/osa with keymap default [OK] Making scythe with keymap default [OK] Making sentraq/number_pad with keymap default [OK] Making sentraq/s60_x/default with keymap default [OK] Making sentraq/s60_x/rgb with keymap default [OK] Making sentraq/s65_plus with keymap default [OK] Making sentraq/s65_x with keymap default [OK] Making setta21/rev1 with keymap default [OK] Making shambles with keymap default [OK] Making shiro with keymap default [OK] Making sidderskb/majbritt with keymap default [OK] Making signum/3_0/elitec with keymap default [OK] Making silverbullet44 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_silverbullet44_default/keyboards/silverbullet44/silverbullet44.lst, -adhlns=.build/obj_silverbullet44_default/keyboards/silverbullet44/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making singa with keymap default [OK] Making sirius/uni660/rev1 with keymap default [OK] Making sirius/uni660/rev2/ansi with keymap default [OK] Making sirius/uni660/rev2/iso with keymap default [OK] Making sirius/unigo66 with keymap default [OK] Making sixkeyboard with keymap default [OK] Making smk60 with keymap default [OK] Making snampad with keymap default [OK] Making sneakbox/aliceclone with keymap default [OK] Making sofle/rev1 with keymap default [OK] Making southpaw75 with keymap default [OK] Making southpole with keymap default [OK] Making soy20 with keymap default [OK] Making spaceman/2_milk with keymap default [OK] Making spaceman/pancake/feather with keymap default [WARNINGS] NKRO is not currently supported with Bluetooth, and has been disabled. Making spaceman/pancake/promicro with keymap default [OK] Making spacetime/rev1 with keymap default [OK] Making spacetime/rev2 with keymap default [OK] Making speedo with keymap default [OK] Making spiderisland/split78 with keymap default [OK] Making splitish with keymap default [OK] Making splitreus62 with keymap default [OK] Making squiggle/rev1 with keymap default [OK] Making standaside with keymap default [OK] Making staryu with keymap default [WARNINGS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ Making stella with keymap default [OK] Making subatomic with keymap default [OK] Making suihankey/alpha with keymap default [OK] Making suihankey/rev1 with keymap default [OK] Making suihankey/split/alpha with keymap default [OK] Making suihankey/split/rev1 with keymap default [OK] Making switchplate/southpaw_65 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_switchplate_southpaw_65_default/pca9555.lst, -adhlns=.build/obj_switchplate_southpaw_65_default/matrix.lst, dropping all -Xassembler and -Wa options. | Making switchplate/southpaw_fullsize with keymap default [OK] Making sx60 with keymap default [OK] Making tada68 with keymap default [OK] Making tanuki with keymap default [OK] Making telophase with keymap default [OK] Making tenki with keymap default [OK] Making tetris with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_tetris_default/keyboards/tetris/tetris.lst, -adhlns=.build/obj_tetris_default/keyboards/tetris/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making tg4x with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_tg4x_default/keyboards/tg4x/tg4x.lst, -adhlns=.build/obj_tg4x_default/keyboards/tg4x/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making tgr/910 with keymap default [OK] Making tgr/910ce with keymap default [OK] Making tgr/alice with keymap default [OK] Making tgr/jane with keymap default [OK] Making tgr/tris with keymap default [OK] Making the_royal/liminal with keymap default [OK] Making the_royal/schwann with keymap default [OK] Making the_ruler with keymap default [OK] Making thedogkeyboard with keymap default [OK] Making themadnoodle/ncc1701kb/v2 with keymap default [OK] Making themadnoodle/noodlepad with keymap default [OK] Making thevankeyboards/bananasplit with keymap default [OK] Making thevankeyboards/caravan with keymap default [OK] Making thevankeyboards/minivan with keymap default [OK] Making thevankeyboards/roadkit with keymap default [OK] Making tkc/candybar/lefty with keymap default [WARNINGS] Enabling LTO on ChibiOS-targeting boards is known to have a high likelihood of failure. If unsure, set LTO_ENABLE = no. | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_tkc_candybar_lefty_default/keyboards/tkc/candybar/lefty/lefty.lst, -adhlns=.build/obj_tkc_candybar_lefty_default/keyboards/tkc/candybar/lefty/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making tkc/candybar/righty with keymap default [WARNINGS] Enabling LTO on ChibiOS-targeting boards is known to have a high likelihood of failure. If unsure, set LTO_ENABLE = no. | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_tkc_candybar_righty_default/keyboards/tkc/candybar/righty/righty.lst, -adhlns=.build/obj_tkc_candybar_righty_default/keyboards/tkc/candybar/righty/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making tkc/godspeed75 with keymap default [OK] Making tkc/m0lly with keymap default [OK] Making tkc/osav2 with keymap default [WARNINGS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_tkc_osav2_default/keyboards/tkc/osav2/osav2.lst, -adhlns=.build/obj_tkc_osav2_default/keyboards/tkc/osav2/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making tkc/tkc1800 with keymap default [OK] Making tkw/stoutgat/v1 with keymap default [OK] Making tkw/stoutgat/v2/f411 with keymap default [OK] Making tmo50 with keymap default [OK] Making toad with keymap default [OK] Making tokyo60 with keymap default [OK] Making torn with keymap default [OK] Making touchpad with keymap default [OK] Making tr60w with keymap default [OK] Making treadstone32/lite with keymap default [OK] Making treadstone32/rev1 with keymap default [OK] Making treadstone48/rev1 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_treadstone48_rev1_default/./common/oled_helper.lst, -adhlns=.build/obj_treadstone48_rev1_default/keyboards/treadstone48/rev1/rev1.lst, dropping all -Xassembler and -Wa options. | Making treadstone48/rev2 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_treadstone48_rev2_default/./common/oled_helper.lst, -adhlns=.build/obj_treadstone48_rev2_default/keyboards/treadstone48/rev2/rev2.lst, dropping all -Xassembler and -Wa options. | Making treasure/type9 with keymap default [OK] Making ua62 with keymap default [OK] Making uk78 with keymap default [OK] Making underscore33/rev1 with keymap default [OK] Making underscore33/rev2 with keymap default [OK] Making unikorn with keymap default [OK] Making uranuma with keymap default [OK] Making ut472 with keymap default [OK] Making uzu42/rev1 with keymap default [OK] Making v60_type_r with keymap default [WARNINGS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_v60_type_r_default/keyboards/v60_type_r/v60_type_r.lst, -adhlns=.build/obj_v60_type_r_default/keyboards/v60_type_r/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making viktus/sp111 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_viktus_sp111_default/mcp23018.lst, -adhlns=.build/obj_viktus_sp111_default/matrix.lst, dropping all -Xassembler and -Wa options. | Making vinta with keymap default [OK] Making vision_division with keymap default [OK] Making vitamins_included/rev1 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_vitamins_included_rev1_default/keyboards/vitamins_included/vitamins_included.lst, -adhlns=.build/obj_vitamins_included_rev1_default/keyboards/vitamins_included/rev1/rev1.lst, dropping all -Xassembler and -Wa options. | Making vitamins_included/rev2 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_vitamins_included_rev2_default/keyboards/vitamins_included/vitamins_included.lst, -adhlns=.build/obj_vitamins_included_rev2_default/keyboards/vitamins_included/rev2/rev2.lst, dropping all -Xassembler and -Wa options. | Making vn66 with keymap default [WARNINGS] * The firmware size is approaching the maximum - 28584/28672 (99%, 88 bytes free) Making waldo with keymap default [OK] Making wallaby with keymap default [OK] Making walletburner/neuron with keymap default [OK] Making westfoxtrot/aanzee with keymap default [OK] Making westfoxtrot/cyclops with keymap default [OK] Making westfoxtrot/cypher/rev1 with keymap default [OK] Making westfoxtrot/cypher/rev5 with keymap default [WARNINGS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ Making westfoxtrot/prophet with keymap default [OK] Making whale/sk/v3 with keymap default [OK] Making wheatfield/blocked65 with keymap default [OK] Making wheatfield/split75 with keymap default [OK] Making whitefox with keymap default [OK] Making wilba_tech/rama_works_koyu with keymap default [OK] Making wilba_tech/rama_works_m10_b with keymap default [OK] Making wilba_tech/rama_works_m10_c with keymap default [OK] Making wilba_tech/rama_works_m50_a with keymap default [OK] Making wilba_tech/rama_works_m60_a with keymap default [OK] Making wilba_tech/rama_works_m65_b with keymap default [OK] Making wilba_tech/rama_works_m65_bx with keymap default [OK] Making wilba_tech/rama_works_m6_a with keymap default [OK] Making wilba_tech/rama_works_m6_b with keymap default [OK] Making wilba_tech/rama_works_u80_a with keymap default [OK] Making wilba_tech/wt60_a with keymap default [OK] Making wilba_tech/wt60_b with keymap default [OK] Making wilba_tech/wt60_bx with keymap default [OK] Making wilba_tech/wt60_c with keymap default [OK] Making wilba_tech/wt60_d with keymap default [OK] Making wilba_tech/wt60_xt with keymap default [OK] Making wilba_tech/wt65_a with keymap default [OK] Making wilba_tech/wt65_b with keymap default [OK] Making wilba_tech/wt65_xt with keymap default [OK] Making wilba_tech/wt65_xtx with keymap default [OK] Making wilba_tech/wt69_a with keymap default [OK] Making wilba_tech/wt75_a with keymap default [OK] Making wilba_tech/wt75_b with keymap default [OK] Making wilba_tech/wt75_c with keymap default [OK] Making wilba_tech/wt80_a with keymap default [OK] Making wilba_tech/wt80_bc with keymap default [OK] Making wilba_tech/wt8_a with keymap default [OK] Making wilba_tech/zeal60 with keymap default [OK] Making wilba_tech/zeal65 with keymap default [OK] Making winkeyless/bface with keymap default [OK] Making winkeyless/bmini with keymap default [OK] Making winkeyless/bminiex with keymap default [OK] Making wolfmarkclub/wm1 with keymap default [WARNINGS] Enabling LTO on ChibiOS-targeting boards is known to have a high likelihood of failure. If unsure, set LTO_ENABLE = no. | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_wolfmarkclub_wm1_default/keyboards/wolfmarkclub/wm1/wm1.lst, -adhlns=.build/obj_wolfmarkclub_wm1_default/keyboards/wolfmarkclub/wm1/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making wsk/g4m3ralpha with keymap default [OK] Making wsk/gothic50 with keymap default [OK] Making wsk/gothic70 with keymap default [OK] Making wsk/houndstooth with keymap default [OK] Making wsk/jerkin with keymap default [OK] Making wsk/kodachi50 with keymap default [OK] Making wsk/pain27 with keymap default [OK] Making wsk/sl40 with keymap default [OK] Making wsk/tkl30 with keymap default [OK] Making wuque/ikki68 with keymap default [OK] Making x16 with keymap default [OK] Making xbows/knight with keymap default [OK] Making xbows/woody with keymap default [OK] Making xd002 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_xd002_default/keyboards/xd002/xd002.lst, -adhlns=.build/obj_xd002_default/keyboards/xd002/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making xd004/v1 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_xd004_v1_default/keyboards/xd004/xd004.lst, -adhlns=.build/obj_xd004_v1_default/keyboards/xd004/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making xd60/rev2 with keymap default [WARNINGS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ Making xd60/rev3 with keymap default [WARNINGS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ Making xd68 with keymap default [WARNINGS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ Making xd75 with keymap default [OK] Making xd84 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_xd84_default/pca9555.lst, -adhlns=.build/obj_xd84_default/matrix.lst, dropping all -Xassembler and -Wa options. | Making xd87 with keymap default [WARNINGS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ Making xd96 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_xd96_default/pca9555.lst, -adhlns=.build/obj_xd96_default/matrix.lst, dropping all -Xassembler and -Wa options. | Making xelus/dawn60 with keymap default [OK] Making xelus/kangaroo with keymap default [OK] Making xelus/snap96 with keymap default [OK] Making xelus/trinityxttkl with keymap default [OK] Making xelus/valor with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_xelus_valor_default/keyboards/xelus/valor/valor.lst, -adhlns=.build/obj_xelus_valor_default/keyboards/xelus/valor/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making xiaomi/mk02 with keymap default [OK] Making xmmx with keymap default [OK] Making xw60 with keymap default [OK] Making yatara/drink_me with keymap default [OK] Making yd60mq/12led with keymap default [OK] Making yd60mq/16led with keymap default [OK] Making yd68 with keymap default [OK] Making ymd75/rev1 with keymap default [OK] Making ymd75/rev2 with keymap default [OK] Making ymd75/rev3 with keymap default [WARNINGS] quantum/backlight/backlight_avr.c:126:13: note: '#pragma message: Using hardware timer 1 with software PWM' 126 | # pragma message "Using hardware timer 1 with software PWM" | ^~~~~~~ Making ymd96 with keymap default [OK] Making ymdk/bface with keymap default [OK] Making ymdk_np21 with keymap default [OK] Making ymdk/sp64 with keymap default [OK] Making ymdk/ymd09 with keymap default [WARNINGS] | | lto-wrapper: warning: Options to Xassembler do not match: -adhlns=.build/obj_ymdk_ymd09_default/keyboards/ymdk/ymd09/ymd09.lst, -adhlns=.build/obj_ymdk_ymd09_default/keyboards/ymdk/ymd09/keymaps/default/keymap.lst, dropping all -Xassembler and -Wa options. | Making ymdk/ymd67 with keymap default [OK] Making yncognito/batpad with keymap default [OK] Making yosino58/rev1 with keymap default [OK] Making yugo_m/model_m_101 with keymap default [OK] Making yurei with keymap default [OK] Making yushakobo/quick7 with keymap default [OK] Making z150_bh with keymap default [OK] Making zfrontier/big_switch with keymap default [OK] Making zinc/rev1 with keymap default [OK] Making zinc/reva with keymap default [OK] Making zj68 with keymap default [OK] Making zlant with keymap default [OK] Making ztboards/after with keymap default [OK] Making ztboards/noon with keymap default [OK] Making zvecr/split_blackpill with keymap default [OK] Making zvecr/zv48/f401 with keymap default [OK] Making zvecr/zv48/f411 with keymap default [OK] Make finished with errors