From 832479c7fbc544a3e8b305af7df9996fa3c5ba00 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Sat, 28 Jan 2023 20:40:47 +0000 Subject: [PATCH] Split out mcu_selection to platform (#19701) --- builddefs/build_keyboard.mk | 3 +- builddefs/mcu_selection.mk | 921 ----------------------------- platforms/avr/mcu_selection.mk | 95 +++ platforms/chibios/mcu_selection.mk | 825 ++++++++++++++++++++++++++ 4 files changed, 922 insertions(+), 922 deletions(-) create mode 100644 platforms/avr/mcu_selection.mk create mode 100644 platforms/chibios/mcu_selection.mk diff --git a/builddefs/build_keyboard.mk b/builddefs/build_keyboard.mk index 6d355c9b8500..def0be69b67d 100644 --- a/builddefs/build_keyboard.mk +++ b/builddefs/build_keyboard.mk @@ -182,7 +182,8 @@ endif include $(BUILDDEFS_PATH)/converters.mk -include $(BUILDDEFS_PATH)/mcu_selection.mk +MCU_ORIG := $(MCU) +include $(wildcard $(PLATFORM_PATH)/*/mcu_selection.mk) # PLATFORM_KEY should be detected in info.json via key 'processor' (or rules.mk 'MCU') ifeq ($(PLATFORM_KEY),) diff --git a/builddefs/mcu_selection.mk b/builddefs/mcu_selection.mk index 1d05902fab9a..139597f9cb07 100644 --- a/builddefs/mcu_selection.mk +++ b/builddefs/mcu_selection.mk @@ -1,923 +1,2 @@ -MCU_ORIG := $(MCU) -ifneq ($(findstring MKL26Z64, $(MCU)),) - # Cortex version - MCU = cortex-m0plus - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 6 - - ## chip/board settings - # - the next two should match the directories in - # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = KINETIS - MCU_SERIES = KL2x - - # Linker script to use - # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ - # or /ld/ - MCU_LDSCRIPT ?= MKL26Z64 - - # Startup code to use - # - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= kl2x - - # Board: it should exist either in /os/hal/boards/, - # /boards/, or drivers/boards/ - BOARD ?= PJRC_TEENSY_LC -endif - -ifneq ($(findstring MK20DX128, $(MCU)),) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = KINETIS - MCU_SERIES = K20x - - # Linker script to use - # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ - # or /ld/ - MCU_LDSCRIPT ?= MK20DX128 - - # Startup code to use - # - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= k20x5 - - # Board: it should exist either in /os/hal/boards/, - # /boards/, or drivers/boards/ - BOARD ?= PJRC_TEENSY_3 -endif - -ifneq ($(findstring MK20DX256, $(MCU)),) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = KINETIS - MCU_SERIES = K20x - - # Linker script to use - # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ - # or /ld/ - MCU_LDSCRIPT ?= MK20DX256 - - # Startup code to use - # - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= k20x7 - - # Board: it should exist either in /os/hal/boards/, - # /boards/, or drivers/boards/ - BOARD ?= PJRC_TEENSY_3_1 -endif - -ifneq ($(findstring MK64FX512, $(MCU)),) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = KINETIS - MCU_SERIES = K60x - - # Linker script to use - # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ - # or /ld/ - MCU_LDSCRIPT ?= MK64FX512 - - # Startup code to use - # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= k60x - - # Board: it should exist either in /os/hal/boards/, - # /boards/, or drivers/boards/ - BOARD ?= PJRC_TEENSY_3_5 -endif - -ifneq ($(findstring MK66FX1M0, $(MCU)),) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = KINETIS - MCU_SERIES = MK66F18 - - # Linker script to use - # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ - # or /ld/ - MCU_LDSCRIPT ?= MK66FX1M0 - - # Startup code to use - # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= MK66F18 - - # Board: it should exist either in /os/hal/boards/, - # /boards/, or drivers/boards/ - BOARD ?= PJRC_TEENSY_3_6 -endif - -ifneq ($(findstring RP2040, $(MCU)),) - # Cortex version - MCU = cortex-m0plus - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - CHIBIOS_PORT = ARMv6-M-RP2 - - ## chip/board settings - # - the next two should match the directories in - # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = RP - MCU_SERIES = RP2040 - - # Linker script to use - # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ - # or /ld/ - STARTUPLD_CONTRIB = $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/ld - MCU_LDSCRIPT ?= RP2040_FLASH_TIMECRIT - LDFLAGS += -L $(STARTUPLD_CONTRIB) - - # Startup code to use - # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= rp2040 - - # Board: it should exist either in /os/hal/boards/, - # /boards/, or drivers/boards/ - BOARD ?= GENERIC_PROMICRO_RP2040 - - # Default UF2 Bootloader settings - UF2_FAMILY ?= RP2040 - FIRMWARE_FORMAT ?= uf2 -endif - -ifneq ($(findstring STM32F042, $(MCU)),) - # Cortex version - MCU = cortex-m0 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 6 - - ## chip/board settings - # - the next two should match the directories in - # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = STM32 - MCU_SERIES = STM32F0xx - - # Linker script to use - # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ - # or /ld/ - MCU_LDSCRIPT ?= STM32F042x6 - - # Startup code to use - # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32f0xx - - # Board: it should exist either in /os/hal/boards/, - # /boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_F042X6 - - USE_FPU ?= no - - # UF2 settings - UF2_FAMILY ?= STM32F0 - - # Stack sizes: Since this chip has limited RAM capacity, the stack area needs to be reduced. - # This ensures that the EEPROM page buffer fits into RAM - USE_PROCESS_STACKSIZE = 0x600 - USE_EXCEPTIONS_STACKSIZE = 0x300 - - # Bootloader address for STM32 DFU - STM32_BOOTLOADER_ADDRESS ?= 0x1FFFC400 -endif - -ifneq ($(findstring STM32F072, $(MCU)),) - # Cortex version - MCU = cortex-m0 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 6 - - ## chip/board settings - # - the next two should match the directories in - # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = STM32 - MCU_SERIES = STM32F0xx - - # Linker script to use - # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ - # or /ld/ - MCU_LDSCRIPT ?= STM32F072xB - - # Startup code to use - # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32f0xx - - # Board: it should exist either in /os/hal/boards/, - # /boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_F072XB - - USE_FPU ?= no - - # UF2 settings - UF2_FAMILY ?= STM32F0 - - # Bootloader address for STM32 DFU - STM32_BOOTLOADER_ADDRESS ?= 0x1FFFC800 -endif - -ifneq ($(findstring STM32F103, $(MCU)),) - # Cortex version - MCU = cortex-m3 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = STM32 - MCU_SERIES = STM32F1xx - - # Linker script to use - # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ - # or /ld/ - ifeq ($(strip $(BOOTLOADER)), uf2boot) - MCU_LDSCRIPT ?= STM32F103xB_uf2boot - else - MCU_LDSCRIPT ?= STM32F103x8 - endif - - # Startup code to use - # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32f1xx - - # Board: it should exist either in /os/hal/boards/, - # /boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_F103 - - USE_FPU ?= no - - # UF2 settings - UF2_FAMILY ?= STM32F1 -endif - -ifneq ($(findstring STM32F303, $(MCU)),) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = STM32 - MCU_SERIES = STM32F3xx - - # Linker script to use - # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ - # or /ld/ - ifeq ($(strip $(BOOTLOADER)), tinyuf2) - MCU_LDSCRIPT ?= STM32F303xC_tinyuf2 - else - MCU_LDSCRIPT ?= STM32F303xC - endif - - # Startup code to use - # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32f3xx - - # Board: it should exist either in /os/hal/boards/, - # /boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_F303XC - - USE_FPU ?= yes - - # UF2 settings - UF2_FAMILY ?= STM32F3 - - # Bootloader address for STM32 DFU - STM32_BOOTLOADER_ADDRESS ?= 0x1FFFD800 -endif - -ifneq ($(findstring STM32F401, $(MCU)),) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = STM32 - MCU_SERIES = STM32F4xx - - # Linker script to use - # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ - # or /ld/ - ifeq ($(strip $(BOOTLOADER)), tinyuf2) - MCU_LDSCRIPT ?= STM32F401xC_tinyuf2 - else - MCU_LDSCRIPT ?= STM32F401xC - endif - - # Startup code to use - # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32f4xx - - # Board: it should exist either in /os/hal/boards/, - # /boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_F401XC - - USE_FPU ?= yes - - # UF2 settings - UF2_FAMILY ?= STM32F4 - - # Bootloader address for STM32 DFU - STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 - - # Revert to legacy wear-leveling driver until ChibiOS's EFL driver is fixed with 128kB and 384kB variants. - EEPROM_DRIVER ?= wear_leveling - WEAR_LEVELING_DRIVER ?= legacy -endif - -ifneq ($(findstring STM32F405, $(MCU)),) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = STM32 - MCU_SERIES = STM32F4xx - - # Linker script to use - # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ - # or /ld/ - MCU_LDSCRIPT ?= STM32F405xG - - # Startup code to use - # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32f4xx - - # Board: it should exist either in /os/hal/boards/, - # /boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_F405XG - - USE_FPU ?= yes - - # UF2 settings - UF2_FAMILY ?= STM32F4 - - # Bootloader address for STM32 DFU - STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 -endif - -ifneq ($(findstring STM32F407, $(MCU)),) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = STM32 - MCU_SERIES = STM32F4xx - - # Linker script to use - # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ - # or /ld/ - MCU_LDSCRIPT ?= STM32F407xE - - # Startup code to use - # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32f4xx - - # Board: it should exist either in /os/hal/boards/, - # /boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_F407XE - - USE_FPU ?= yes - - # UF2 settings - UF2_FAMILY ?= STM32F4 - - # Bootloader address for STM32 DFU - STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 -endif - -ifneq ($(findstring STM32F411, $(MCU)),) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = STM32 - MCU_SERIES = STM32F4xx - - # Linker script to use - # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ - # or /ld/ - ifeq ($(strip $(BOOTLOADER)), tinyuf2) - MCU_LDSCRIPT ?= STM32F411xE_tinyuf2 - else - MCU_LDSCRIPT ?= STM32F411xE - endif - - # Startup code to use - # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32f4xx - - # Board: it should exist either in /os/hal/boards/, - # /boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_F411XE - - USE_FPU ?= yes - - # UF2 settings - UF2_FAMILY ?= STM32F4 - - # Bootloader address for STM32 DFU - STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 -endif - -ifneq ($(findstring STM32F446, $(MCU)),) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = STM32 - MCU_SERIES = STM32F4xx - - # Linker script to use - # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ - # or /ld/ - MCU_LDSCRIPT ?= STM32F446xE - - # Startup code to use - # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32f4xx - - # Board: it should exist either in /os/hal/boards/, - # /boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_F446XE - - USE_FPU ?= yes - - # Bootloader address for STM32 DFU - STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 - - # Default as no chibios efl config - EEPROM_DRIVER ?= transient -endif - -ifneq ($(findstring STM32G431, $(MCU)),) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = STM32 - MCU_SERIES = STM32G4xx - - # Linker script to use - # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ - # or /ld/ - MCU_LDSCRIPT ?= STM32G431xB - - # Startup code to use - # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32g4xx - - # Board: it should exist either in /os/hal/boards/, - # /boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_G431XB - - USE_FPU ?= yes - - # UF2 settings - UF2_FAMILY ?= STM32G4 - - # Bootloader address for STM32 DFU - STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 -endif - -ifneq ($(findstring STM32G474, $(MCU)),) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = STM32 - MCU_SERIES = STM32G4xx - - # Linker script to use - # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ - # or /ld/ - MCU_LDSCRIPT ?= STM32G474xE - - # Startup code to use - # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32g4xx - - # Board: it should exist either in /os/hal/boards/, - # /boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_G474XE - - USE_FPU ?= yes - - # UF2 settings - UF2_FAMILY ?= STM32G4 - - # Bootloader address for STM32 DFU - STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 -endif - -ifneq (,$(filter $(MCU),STM32L432 STM32L442)) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = STM32 - MCU_SERIES = STM32L4xx - - # Linker script to use - # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ - # or /ld/ - MCU_LDSCRIPT ?= STM32L432xC - - # Startup code to use - # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32l4xx - - # Board: it should exist either in /os/hal/boards/, - # /boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_L432XC - - PLATFORM_NAME ?= platform_l432 - - USE_FPU ?= yes - - # UF2 settings - UF2_FAMILY ?= STM32L4 - - # Bootloader address for STM32 DFU - STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 -endif - -ifneq (,$(filter $(MCU),STM32L433 STM32L443)) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = STM32 - MCU_SERIES = STM32L4xx - - # Linker script to use - # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ - # or /ld/ - MCU_LDSCRIPT ?= STM32L432xC - - # Startup code to use - # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32l4xx - - # Board: it should exist either in /os/hal/boards/, - # /boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_L433XC - - PLATFORM_NAME ?= platform_l432 - - USE_FPU ?= yes - - # UF2 settings - UF2_FAMILY ?= STM32L4 - - # Bootloader address for STM32 DFU - STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 -endif - -ifneq (,$(filter $(MCU),STM32L412 STM32L422)) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = STM32 - MCU_SERIES = STM32L4xx - - # Linker script to use - # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ - # or /ld/ - MCU_LDSCRIPT ?= STM32L412xB - - # Startup code to use - # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32l4xx - - # Board: it should exist either in /os/hal/boards/, - # /boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_L412XB - - PLATFORM_NAME ?= platform_l412_l422 - - USE_FPU ?= yes - - # UF2 settings - UF2_FAMILY ?= STM32L4 - - # Bootloader address for STM32 DFU - STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 -endif - -ifneq ($(findstring WB32F3G71, $(MCU)),) - # Cortex version - MCU = cortex-m3 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = WB32 - MCU_SERIES = WB32F3G71xx - - # Linker script to use - # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ - # or /ld/ - MCU_LDSCRIPT ?= WB32F3G71x9 - - # Startup code to use - # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= wb32f3g71xx - - # Board: it should exist either in /os/hal/boards/, - # /boards/, or drivers/boards/ - BOARD ?= GENERIC_WB32_F3G71XX - - USE_FPU ?= no - - # Bootloader address for WB32 DFU - WB32_BOOTLOADER_ADDRESS ?= 0x1FFFE000 -endif - -ifneq ($(findstring WB32FQ95, $(MCU)),) - # Cortex version - MCU = cortex-m3 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = WB32 - MCU_SERIES = WB32FQ95xx - - # Linker script to use - # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ - # or /ld/ - MCU_LDSCRIPT ?= WB32FQ95xB - - # Startup code to use - # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= wb32fq95xx - - # Board: it should exist either in /os/hal/boards/, - # /boards/, or drivers/boards/ - BOARD ?= GENERIC_WB32_FQ95XX - - USE_FPU ?= no - - # Bootloader address for WB32 DFU - WB32_BOOTLOADER_ADDRESS ?= 0x1FFFE000 -endif - -ifneq ($(findstring GD32VF103, $(MCU)),) - # RISC-V - MCU = risc-v - - # RISC-V extensions and abi configuration - MCU_ARCH = rv32imac - MCU_ABI = ilp32 - MCU_CMODEL = medlow - - ## chip/board settings - # - the next two should match the directories in - # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_PORT_NAME = GD - MCU_FAMILY = GD32V - MCU_SERIES = GD32VF103 - - # Linker script to use - # - it should exist either in /os/common/startup/RISCV-ECLIC/compilers/GCC/ld/ - # or /ld/ - MCU_LDSCRIPT ?= GD32VF103xB - - # Startup code to use - # - it should exist in /os/common/startup/RISCV-ECLIC/compilers/GCC/mk/ - MCU_STARTUP ?= gd32vf103 - - # Board: it should exist either in /os/hal/boards/, - # /boards/, or drivers/boards/ - BOARD ?= SIPEED_LONGAN_NANO - - USE_FPU ?= no -endif - -ifneq (,$(filter $(MCU),at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647 at90usb1286 at90usb1287)) - PROTOCOL = LUFA - - # Processor frequency. - # This will define a symbol, F_CPU, in all source code files equal to the - # processor frequency in Hz. You can then use this symbol in your source code to - # calculate timings. Do NOT tack on a 'UL' at the end, this will be done - # automatically to create a 32-bit value in your source code. - # - # This will be an integer division of F_USB below, as it is sourced by - # F_USB after it has run through any CPU prescalers. Note that this value - # does not *change* the processor frequency - it should merely be updated to - # reflect the processor speed set externally so that the code can use accurate - # software delays. - F_CPU ?= 16000000 - - # LUFA specific - # - # Target architecture (see library "Board Types" documentation). - ARCH = AVR8 - - # Input clock frequency. - # This will define a symbol, F_USB, in all source code files equal to the - # input clock frequency (before any prescaling is performed) in Hz. This value may - # differ from F_CPU if prescaling is used on the latter, and is required as the - # raw input clock is fed directly to the PLL sections of the AVR for high speed - # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' - # at the end, this will be done automatically to create a 32-bit value in your - # source code. - # - # If no clock division is performed on the input clock inside the AVR (via the - # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. - F_USB ?= $(F_CPU) - - # Interrupt driven control endpoint task - ifeq (,$(filter $(NO_INTERRUPT_CONTROL_ENDPOINT),yes)) - OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - endif - ifneq (,$(filter $(MCU),at90usb162 atmega16u2 atmega32u2)) - NO_I2C = yes - endif -endif - -ifneq (,$(filter $(MCU),atmega32a)) - # MCU name for avrdude - AVRDUDE_MCU = m32 - - PROTOCOL = VUSB - - # Processor frequency. - # This will define a symbol, F_CPU, in all source code files equal to the - # processor frequency in Hz. You can then use this symbol in your source code to - # calculate timings. Do NOT tack on a 'UL' at the end, this will be done - # automatically to create a 32-bit value in your source code. - F_CPU ?= 12000000 -endif - -ifneq (,$(filter $(MCU),atmega328p)) - # MCU name for avrdude - AVRDUDE_MCU = m328p - - PROTOCOL = VUSB - - # Processor frequency. - # This will define a symbol, F_CPU, in all source code files equal to the - # processor frequency in Hz. You can then use this symbol in your source code to - # calculate timings. Do NOT tack on a 'UL' at the end, this will be done - # automatically to create a 32-bit value in your source code. - F_CPU ?= 16000000 -endif - -ifneq (,$(filter $(MCU),atmega328)) - # MCU name for avrdude - AVRDUDE_MCU = m328 - - PROTOCOL = VUSB - - # Processor frequency. - # This will define a symbol, F_CPU, in all source code files equal to the - # processor frequency in Hz. You can then use this symbol in your source code to - # calculate timings. Do NOT tack on a 'UL' at the end, this will be done - # automatically to create a 32-bit value in your source code. - F_CPU ?= 16000000 -endif - -ifneq (,$(filter $(MCU),attiny85)) - PROTOCOL = VUSB - - # Processor frequency. - # This will define a symbol, F_CPU, in all source code files equal to the - # processor frequency in Hz. You can then use this symbol in your source code to - # calculate timings. Do NOT tack on a 'UL' at the end, this will be done - # automatically to create a 32-bit value in your source code. - F_CPU ?= 16500000 -endif diff --git a/platforms/avr/mcu_selection.mk b/platforms/avr/mcu_selection.mk new file mode 100644 index 000000000000..c49818fbfbf5 --- /dev/null +++ b/platforms/avr/mcu_selection.mk @@ -0,0 +1,95 @@ +ifneq (,$(filter $(MCU),at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647 at90usb1286 at90usb1287)) + PROTOCOL = LUFA + + # Processor frequency. + # This will define a symbol, F_CPU, in all source code files equal to the + # processor frequency in Hz. You can then use this symbol in your source code to + # calculate timings. Do NOT tack on a 'UL' at the end, this will be done + # automatically to create a 32-bit value in your source code. + # + # This will be an integer division of F_USB below, as it is sourced by + # F_USB after it has run through any CPU prescalers. Note that this value + # does not *change* the processor frequency - it should merely be updated to + # reflect the processor speed set externally so that the code can use accurate + # software delays. + F_CPU ?= 16000000 + + # LUFA specific + # + # Target architecture (see library "Board Types" documentation). + ARCH = AVR8 + + # Input clock frequency. + # This will define a symbol, F_USB, in all source code files equal to the + # input clock frequency (before any prescaling is performed) in Hz. This value may + # differ from F_CPU if prescaling is used on the latter, and is required as the + # raw input clock is fed directly to the PLL sections of the AVR for high speed + # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' + # at the end, this will be done automatically to create a 32-bit value in your + # source code. + # + # If no clock division is performed on the input clock inside the AVR (via the + # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. + F_USB ?= $(F_CPU) + + # Interrupt driven control endpoint task + ifeq (,$(filter $(NO_INTERRUPT_CONTROL_ENDPOINT),yes)) + OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + endif + ifneq (,$(filter $(MCU),at90usb162 atmega16u2 atmega32u2)) + NO_I2C = yes + endif +endif + +ifneq (,$(filter $(MCU),atmega32a)) + # MCU name for avrdude + AVRDUDE_MCU = m32 + + PROTOCOL = VUSB + + # Processor frequency. + # This will define a symbol, F_CPU, in all source code files equal to the + # processor frequency in Hz. You can then use this symbol in your source code to + # calculate timings. Do NOT tack on a 'UL' at the end, this will be done + # automatically to create a 32-bit value in your source code. + F_CPU ?= 12000000 +endif + +ifneq (,$(filter $(MCU),atmega328p)) + # MCU name for avrdude + AVRDUDE_MCU = m328p + + PROTOCOL = VUSB + + # Processor frequency. + # This will define a symbol, F_CPU, in all source code files equal to the + # processor frequency in Hz. You can then use this symbol in your source code to + # calculate timings. Do NOT tack on a 'UL' at the end, this will be done + # automatically to create a 32-bit value in your source code. + F_CPU ?= 16000000 +endif + +ifneq (,$(filter $(MCU),atmega328)) + # MCU name for avrdude + AVRDUDE_MCU = m328 + + PROTOCOL = VUSB + + # Processor frequency. + # This will define a symbol, F_CPU, in all source code files equal to the + # processor frequency in Hz. You can then use this symbol in your source code to + # calculate timings. Do NOT tack on a 'UL' at the end, this will be done + # automatically to create a 32-bit value in your source code. + F_CPU ?= 16000000 +endif + +ifneq (,$(filter $(MCU),attiny85)) + PROTOCOL = VUSB + + # Processor frequency. + # This will define a symbol, F_CPU, in all source code files equal to the + # processor frequency in Hz. You can then use this symbol in your source code to + # calculate timings. Do NOT tack on a 'UL' at the end, this will be done + # automatically to create a 32-bit value in your source code. + F_CPU ?= 16500000 +endif diff --git a/platforms/chibios/mcu_selection.mk b/platforms/chibios/mcu_selection.mk new file mode 100644 index 000000000000..6b6488466b68 --- /dev/null +++ b/platforms/chibios/mcu_selection.mk @@ -0,0 +1,825 @@ +ifneq ($(findstring MKL26Z64, $(MCU)),) + # Cortex version + MCU = cortex-m0plus + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 6 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = KINETIS + MCU_SERIES = KL2x + + # Linker script to use + # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ + # or /ld/ + MCU_LDSCRIPT ?= MKL26Z64 + + # Startup code to use + # - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= kl2x + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= PJRC_TEENSY_LC +endif + +ifneq ($(findstring MK20DX128, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = KINETIS + MCU_SERIES = K20x + + # Linker script to use + # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ + # or /ld/ + MCU_LDSCRIPT ?= MK20DX128 + + # Startup code to use + # - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= k20x5 + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= PJRC_TEENSY_3 +endif + +ifneq ($(findstring MK20DX256, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = KINETIS + MCU_SERIES = K20x + + # Linker script to use + # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ + # or /ld/ + MCU_LDSCRIPT ?= MK20DX256 + + # Startup code to use + # - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= k20x7 + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= PJRC_TEENSY_3_1 +endif + +ifneq ($(findstring MK64FX512, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = KINETIS + MCU_SERIES = K60x + + # Linker script to use + # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ + # or /ld/ + MCU_LDSCRIPT ?= MK64FX512 + + # Startup code to use + # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= k60x + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= PJRC_TEENSY_3_5 +endif + +ifneq ($(findstring MK66FX1M0, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = KINETIS + MCU_SERIES = MK66F18 + + # Linker script to use + # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ + # or /ld/ + MCU_LDSCRIPT ?= MK66FX1M0 + + # Startup code to use + # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= MK66F18 + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= PJRC_TEENSY_3_6 +endif + +ifneq ($(findstring RP2040, $(MCU)),) + # Cortex version + MCU = cortex-m0plus + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + CHIBIOS_PORT = ARMv6-M-RP2 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = RP + MCU_SERIES = RP2040 + + # Linker script to use + # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ + # or /ld/ + STARTUPLD_CONTRIB = $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/ld + MCU_LDSCRIPT ?= RP2040_FLASH_TIMECRIT + LDFLAGS += -L $(STARTUPLD_CONTRIB) + + # Startup code to use + # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= rp2040 + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= GENERIC_PROMICRO_RP2040 + + # Default UF2 Bootloader settings + UF2_FAMILY ?= RP2040 + FIRMWARE_FORMAT ?= uf2 +endif + +ifneq ($(findstring STM32F042, $(MCU)),) + # Cortex version + MCU = cortex-m0 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 6 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32F0xx + + # Linker script to use + # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ + # or /ld/ + MCU_LDSCRIPT ?= STM32F042x6 + + # Startup code to use + # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32f0xx + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_F042X6 + + USE_FPU ?= no + + # UF2 settings + UF2_FAMILY ?= STM32F0 + + # Stack sizes: Since this chip has limited RAM capacity, the stack area needs to be reduced. + # This ensures that the EEPROM page buffer fits into RAM + USE_PROCESS_STACKSIZE = 0x600 + USE_EXCEPTIONS_STACKSIZE = 0x300 + + # Bootloader address for STM32 DFU + STM32_BOOTLOADER_ADDRESS ?= 0x1FFFC400 +endif + +ifneq ($(findstring STM32F072, $(MCU)),) + # Cortex version + MCU = cortex-m0 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 6 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32F0xx + + # Linker script to use + # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ + # or /ld/ + MCU_LDSCRIPT ?= STM32F072xB + + # Startup code to use + # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32f0xx + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_F072XB + + USE_FPU ?= no + + # UF2 settings + UF2_FAMILY ?= STM32F0 + + # Bootloader address for STM32 DFU + STM32_BOOTLOADER_ADDRESS ?= 0x1FFFC800 +endif + +ifneq ($(findstring STM32F103, $(MCU)),) + # Cortex version + MCU = cortex-m3 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32F1xx + + # Linker script to use + # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ + # or /ld/ + ifeq ($(strip $(BOOTLOADER)), uf2boot) + MCU_LDSCRIPT ?= STM32F103xB_uf2boot + else + MCU_LDSCRIPT ?= STM32F103x8 + endif + + # Startup code to use + # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32f1xx + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_F103 + + USE_FPU ?= no + + # UF2 settings + UF2_FAMILY ?= STM32F1 +endif + +ifneq ($(findstring STM32F303, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32F3xx + + # Linker script to use + # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ + # or /ld/ + ifeq ($(strip $(BOOTLOADER)), tinyuf2) + MCU_LDSCRIPT ?= STM32F303xC_tinyuf2 + else + MCU_LDSCRIPT ?= STM32F303xC + endif + + # Startup code to use + # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32f3xx + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_F303XC + + USE_FPU ?= yes + + # UF2 settings + UF2_FAMILY ?= STM32F3 + + # Bootloader address for STM32 DFU + STM32_BOOTLOADER_ADDRESS ?= 0x1FFFD800 +endif + +ifneq ($(findstring STM32F401, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32F4xx + + # Linker script to use + # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ + # or /ld/ + ifeq ($(strip $(BOOTLOADER)), tinyuf2) + MCU_LDSCRIPT ?= STM32F401xC_tinyuf2 + else + MCU_LDSCRIPT ?= STM32F401xC + endif + + # Startup code to use + # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32f4xx + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_F401XC + + USE_FPU ?= yes + + # UF2 settings + UF2_FAMILY ?= STM32F4 + + # Bootloader address for STM32 DFU + STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 + + # Revert to legacy wear-leveling driver until ChibiOS's EFL driver is fixed with 128kB and 384kB variants. + EEPROM_DRIVER ?= wear_leveling + WEAR_LEVELING_DRIVER ?= legacy +endif + +ifneq ($(findstring STM32F405, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32F4xx + + # Linker script to use + # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ + # or /ld/ + MCU_LDSCRIPT ?= STM32F405xG + + # Startup code to use + # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32f4xx + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_F405XG + + USE_FPU ?= yes + + # UF2 settings + UF2_FAMILY ?= STM32F4 + + # Bootloader address for STM32 DFU + STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 +endif + +ifneq ($(findstring STM32F407, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32F4xx + + # Linker script to use + # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ + # or /ld/ + MCU_LDSCRIPT ?= STM32F407xE + + # Startup code to use + # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32f4xx + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_F407XE + + USE_FPU ?= yes + + # UF2 settings + UF2_FAMILY ?= STM32F4 + + # Bootloader address for STM32 DFU + STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 +endif + +ifneq ($(findstring STM32F411, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32F4xx + + # Linker script to use + # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ + # or /ld/ + ifeq ($(strip $(BOOTLOADER)), tinyuf2) + MCU_LDSCRIPT ?= STM32F411xE_tinyuf2 + else + MCU_LDSCRIPT ?= STM32F411xE + endif + + # Startup code to use + # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32f4xx + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_F411XE + + USE_FPU ?= yes + + # UF2 settings + UF2_FAMILY ?= STM32F4 + + # Bootloader address for STM32 DFU + STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 +endif + +ifneq ($(findstring STM32F446, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32F4xx + + # Linker script to use + # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ + # or /ld/ + MCU_LDSCRIPT ?= STM32F446xE + + # Startup code to use + # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32f4xx + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_F446XE + + USE_FPU ?= yes + + # Bootloader address for STM32 DFU + STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 + + # Default as no chibios efl config + EEPROM_DRIVER ?= transient +endif + +ifneq ($(findstring STM32G431, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32G4xx + + # Linker script to use + # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ + # or /ld/ + MCU_LDSCRIPT ?= STM32G431xB + + # Startup code to use + # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32g4xx + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_G431XB + + USE_FPU ?= yes + + # UF2 settings + UF2_FAMILY ?= STM32G4 + + # Bootloader address for STM32 DFU + STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 +endif + +ifneq ($(findstring STM32G474, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32G4xx + + # Linker script to use + # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ + # or /ld/ + MCU_LDSCRIPT ?= STM32G474xE + + # Startup code to use + # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32g4xx + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_G474XE + + USE_FPU ?= yes + + # UF2 settings + UF2_FAMILY ?= STM32G4 + + # Bootloader address for STM32 DFU + STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 +endif + +ifneq (,$(filter $(MCU),STM32L432 STM32L442)) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32L4xx + + # Linker script to use + # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ + # or /ld/ + MCU_LDSCRIPT ?= STM32L432xC + + # Startup code to use + # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32l4xx + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_L432XC + + PLATFORM_NAME ?= platform_l432 + + USE_FPU ?= yes + + # UF2 settings + UF2_FAMILY ?= STM32L4 + + # Bootloader address for STM32 DFU + STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 +endif + +ifneq (,$(filter $(MCU),STM32L433 STM32L443)) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32L4xx + + # Linker script to use + # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ + # or /ld/ + MCU_LDSCRIPT ?= STM32L432xC + + # Startup code to use + # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32l4xx + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_L433XC + + PLATFORM_NAME ?= platform_l432 + + USE_FPU ?= yes + + # UF2 settings + UF2_FAMILY ?= STM32L4 + + # Bootloader address for STM32 DFU + STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 +endif + +ifneq (,$(filter $(MCU),STM32L412 STM32L422)) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32L4xx + + # Linker script to use + # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ + # or /ld/ + MCU_LDSCRIPT ?= STM32L412xB + + # Startup code to use + # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32l4xx + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_L412XB + + PLATFORM_NAME ?= platform_l412_l422 + + USE_FPU ?= yes + + # UF2 settings + UF2_FAMILY ?= STM32L4 + + # Bootloader address for STM32 DFU + STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 +endif + +ifneq ($(findstring WB32F3G71, $(MCU)),) + # Cortex version + MCU = cortex-m3 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = WB32 + MCU_SERIES = WB32F3G71xx + + # Linker script to use + # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ + # or /ld/ + MCU_LDSCRIPT ?= WB32F3G71x9 + + # Startup code to use + # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= wb32f3g71xx + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= GENERIC_WB32_F3G71XX + + USE_FPU ?= no + + # Bootloader address for WB32 DFU + WB32_BOOTLOADER_ADDRESS ?= 0x1FFFE000 +endif + +ifneq ($(findstring WB32FQ95, $(MCU)),) + # Cortex version + MCU = cortex-m3 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = WB32 + MCU_SERIES = WB32FQ95xx + + # Linker script to use + # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ + # or /ld/ + MCU_LDSCRIPT ?= WB32FQ95xB + + # Startup code to use + # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= wb32fq95xx + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= GENERIC_WB32_FQ95XX + + USE_FPU ?= no + + # Bootloader address for WB32 DFU + WB32_BOOTLOADER_ADDRESS ?= 0x1FFFE000 +endif + +ifneq ($(findstring GD32VF103, $(MCU)),) + # RISC-V + MCU = risc-v + + # RISC-V extensions and abi configuration + MCU_ARCH = rv32imac + MCU_ABI = ilp32 + MCU_CMODEL = medlow + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_PORT_NAME = GD + MCU_FAMILY = GD32V + MCU_SERIES = GD32VF103 + + # Linker script to use + # - it should exist either in /os/common/startup/RISCV-ECLIC/compilers/GCC/ld/ + # or /ld/ + MCU_LDSCRIPT ?= GD32VF103xB + + # Startup code to use + # - it should exist in /os/common/startup/RISCV-ECLIC/compilers/GCC/mk/ + MCU_STARTUP ?= gd32vf103 + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= SIPEED_LONGAN_NANO + + USE_FPU ?= no +endif