build-prerequisites.sh

#! /usr/bin/env bash
# Copyright (c) 2011-2015, ARM Limited
# All rights reserved.
# 
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
# 
#     * Redistributions of source code must retain the above copyright notice,
#       this list of conditions and the following disclaimer.
#     * Redistributions in binary form must reproduce the above copyright
#       notice, this list of conditions and the following disclaimer in the
#       documentation and/or other materials provided with the distribution.
#     * Neither the name of ARM nor the names of its contributors may be used
#       to endorse or promote products derived from this software without
#       specific prior written permission.
# 
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.

set -e
set -x
set -u
set -o pipefail

umask 022

exec < /dev/null

script_path=`cd $(dirname $0) && pwd -P`
. $script_path/build-common.sh

# This file contains the sequence of commands used to build the prerequisites
# for ARM EABI toolchain.
usage ()
{
cat<<EOF
Usage: $0 [--build_tools=...] [--skip_steps=...]

This script will build dependent libraries for gcc arm embedded toolchain.

OPTIONS:
  --build_tools=TOOLS   specify where to find the native build tools that
                        will be used for building gcc arm embedded toolchain
                        and related dependent libraries.  If not specified,
                        the ones in your system will be used.

			Please refer to howto-build document to find out how
			to download and deploy prebuilt native tools for 32bit
			build platform.
                        The prebuilt ones provided by arm embedded toolchain
                        team are supposed to run on 32bit build platform, thus
                        not suitable for 64bit platform.

  --skip_steps=STEPS    specify which build steps you want to skip.  Concatenate
                        them with comma for skipping more than one steps.
                        Available step is: mingw32.

EOF
}

if [ $# -gt 2 ] ; then
    usage
fi

skip_steps=
skip_mingw32=no

for ac_arg; do
    case $ac_arg in
        --skip_steps=*)
            skip_steps=`echo $ac_arg | sed -e "s/--skip_steps=//g" -e "s/,/ /g"`
            ;;
        --build_tools=*)
            build_tools=`echo $ac_arg | sed -e "s/--build_tools=//g"`
            build_tools_abs_path=`cd $build_tools && pwd -P`
            if [ -d $build_tools_abs_path ]; then
              export PATH=$build_tools_abs_path/gcc/bin:$PATH
              export PATH=$build_tools_abs_path/mingw-w64-gcc/bin:$PATH
            else
              echo "The specified folder of build tools don't exist: $build_tools" 1>&2
              exit 1
            fi
            ;;
        *)
            usage
	    exit 1
            ;;
    esac
done

if [ "x$skip_steps" != "x" ]; then
        for ss in $skip_steps; do
                case $ss in
                    mingw32)
                      skip_mingw32=yes
                      ;;
                    *)
                      echo "Unknown build steps: $ss" 1>&2
                      usage
                      exit 1
                      ;;
                esac
        done
fi

if [ "x$BUILD" == "xx86_64-apple-darwin10" ]; then
  skip_mingw32=yes
fi

rm -rf $BUILDDIR_NATIVE && mkdir -p $BUILDDIR_NATIVE
rm -rf $INSTALLDIR_NATIVE && mkdir -p $INSTALLDIR_NATIVE
if [ "x$skip_mingw32" != "xyes" ] ; then
rm -rf $BUILDDIR_MINGW && mkdir -p $BUILDDIR_MINGW
rm -rf $INSTALLDIR_MINGW && mkdir -p $INSTALLDIR_MINGW
fi
rm -rf $PACKAGEDIR && mkdir -p $PACKAGEDIR

cd $SRCDIR

echo Task [I-0] /$HOST_NATIVE/zlib/
rm -rf $BUILDDIR_NATIVE/zlib
copy_dir_clean $SRCDIR/$ZLIB $BUILDDIR_NATIVE/zlib
pushd $BUILDDIR_NATIVE/zlib
#install zlib at .../host-libs/zlib, prevent gcc from linking into this external zlib
./configure --static --prefix=$BUILDDIR_NATIVE/host-libs/zlib
make
make install
popd

echo Task [I-1] /$HOST_NATIVE/gmp/
rm -rf $BUILDDIR_NATIVE/gmp && mkdir -p $BUILDDIR_NATIVE/gmp 
pushd $BUILDDIR_NATIVE/gmp
 
CPPFLAGS="-fexceptions" $SRCDIR/$GMP/configure --build=$BUILD \
    --host=$HOST_NATIVE \
    --prefix=$BUILDDIR_NATIVE/host-libs/usr \
    --enable-cxx \
    --disable-shared \
    --disable-nls

make -j$JOBS
make install
#make check
popd

echo Task [I-2] /$HOST_NATIVE/mpfr/
rm -rf $BUILDDIR_NATIVE/mpfr && mkdir -p $BUILDDIR_NATIVE/mpfr
pushd $BUILDDIR_NATIVE/mpfr

$SRCDIR/$MPFR/configure --build=$BUILD \
    --host=$HOST_NATIVE \
    --target=$TARGET \
    --prefix=$BUILDDIR_NATIVE/host-libs/usr \
    --disable-shared \
    --disable-nls \
    --with-gmp=$BUILDDIR_NATIVE/host-libs/usr

make -j$JOBS
make install
#make check
popd

echo Task [I-3] /$HOST_NATIVE/mpc/
rm -rf $BUILDDIR_NATIVE/mpc && mkdir -p $BUILDDIR_NATIVE/mpc 
pushd $BUILDDIR_NATIVE/mpc 

$SRCDIR/$MPC/configure --build=$BUILD \
    --host=$HOST_NATIVE \
    --target=$TARGET \
    --prefix=$BUILDDIR_NATIVE/host-libs/usr \
    --disable-shared \
    --disable-nls \
    --with-gmp=$BUILDDIR_NATIVE/host-libs/usr \
    --with-mpfr=$BUILDDIR_NATIVE/host-libs/usr

make -j$JOBS
make install
#make check
popd

echo Task [I-4] /$HOST_NATIVE/isl/
rm -rf $BUILDDIR_NATIVE/isl && mkdir -p $BUILDDIR_NATIVE/isl
pushd $BUILDDIR_NATIVE/isl

$SRCDIR/$ISL/configure --build=$BUILD \
    --host=$HOST_NATIVE \
    --target=$TARGET \
    --prefix=$BUILDDIR_NATIVE/host-libs/usr \
    --disable-shared \
    --disable-nls \
    --with-gmp-prefix=$BUILDDIR_NATIVE/host-libs/usr

make
make install
#make check
popd

echo Task [I-5] /$HOST_NATIVE/cloog/
rm -rf $BUILDDIR_NATIVE/cloog && mkdir -p $BUILDDIR_NATIVE/cloog
pushd $BUILDDIR_NATIVE/cloog

$SRCDIR/$CLOOG/configure --build=$BUILD \
    --host=$HOST_NATIVE \
    --target=$TARGET \
    --prefix=$BUILDDIR_NATIVE/host-libs/usr \
    --disable-shared \
    --disable-nls \
    --with-bits=gmp \
    --with-host-libstdcxx='-lstdc++'    \
    --with-gmp-prefix=$BUILDDIR_NATIVE/host-libs/usr \
    --with-isl-prefix=$BUILDDIR_NATIVE/host-libs/usr

make -j$JOBS
make install
#make check
popd

echo Task [I-6] /$HOST_NATIVE/libelf/
rm -rf $BUILDDIR_NATIVE/libelf && mkdir -p $BUILDDIR_NATIVE/libelf
pushd $BUILDDIR_NATIVE/libelf

$SRCDIR/$LIBELF/configure --build=$BUILD \
    --host=$HOST_NATIVE \
    --target=$TARGET \
    --prefix=$BUILDDIR_NATIVE/host-libs/usr \
    --disable-shared \
    --disable-nls

make -j$JOBS
make install
#make check
popd

echo Task [I-7] /$HOST_NATIVE/expat/
rm -rf $BUILDDIR_NATIVE/expat && mkdir -p $BUILDDIR_NATIVE/expat
pushd $BUILDDIR_NATIVE/expat

$SRCDIR/$EXPAT/configure --build=$BUILD \
    --host=$HOST_NATIVE \
    --target=$TARGET \
    --prefix=$BUILDDIR_NATIVE/host-libs/usr \
    --disable-shared \
    --disable-nls

make -j$JOBS
make install
popd

# skip building mingw32 toolchain if "--skip_mingw32" specified
if [ "x$skip_mingw32" == "xyes" ] ; then
    exit 0
fi

saveenv
saveenvvar CC_FOR_BUILD gcc
saveenvvar CC $HOST_MINGW_TOOL-gcc
saveenvvar CXX $HOST_MINGW_TOOL-g++
saveenvvar AR $HOST_MINGW_TOOL-ar
saveenvvar RANLIB $HOST_MINGW_TOOL-ranlib
saveenvvar STRIP $HOST_MINGW_TOOL-strip
saveenvvar NM $HOST_MINGW_TOOL-nm
saveenvvar AS $HOST_MINGW_TOOL-as
saveenvvar OBJDUMP $HOST_MINGW_TOOL-objdump
saveenvvar RC $HOST_MINGW_TOOL-windres
saveenvvar WINDRES $HOST_MINGW_TOOL-windres

echo Task [II-0] /$HOST_MINGW/zlib/
rm -rf $BUILDDIR_MINGW/zlib
copy_dir_clean $SRCDIR/$ZLIB $BUILDDIR_MINGW/zlib
#saveenv
#saveenvvar AR "$HOST_MINGW_TOOL-ar"
pushd $BUILDDIR_MINGW/zlib
#install zlib at .../host-libs/zlib, prevent gcc from linking into this external zlib
./configure --static --prefix=$BUILDDIR_MINGW/host-libs/zlib
make
make install
popd
#restoreenv

echo Task [II-1] /$HOST_MINGW/libiconv/
rm -rf $BUILDDIR_MINGW/libiconv && mkdir -p $BUILDDIR_MINGW/libiconv
pushd $BUILDDIR_MINGW/libiconv

$SRCDIR/$LIBICONV/configure --build=$BUILD \
    --host=$HOST_MINGW \
    --target=$TARGET \
    --prefix=$BUILDDIR_MINGW/host-libs/usr \
    --disable-shared \
    --disable-nls

make -j$JOBS
make install
popd

echo Task [II-2] /$HOST_MINGW/gmp/
rm -rf $BUILDDIR_MINGW/gmp && mkdir -p $BUILDDIR_MINGW/gmp
pushd $BUILDDIR_MINGW/gmp

$SRCDIR/$GMP/configure --build=$BUILD \
    --host=$HOST_MINGW \
    --prefix=$BUILDDIR_MINGW/host-libs/usr \
    --disable-shared \
    --enable-cxx \
    --disable-nls

make -j$JOBS
make install
popd

echo Task [II-3] /$HOST_MINGW/mpfr/
rm -rf $BUILDDIR_MINGW/mpfr && mkdir -p $BUILDDIR_MINGW/mpfr
pushd $BUILDDIR_MINGW/mpfr

$SRCDIR/$MPFR/configure --build=$BUILD \
    --host=$HOST_MINGW \
    --target=$TARGET \
    --prefix=$BUILDDIR_MINGW/host-libs/usr \
    --disable-shared \
    --disable-nls \
    --with-gmp=$BUILDDIR_MINGW/host-libs/usr

make -j$JOBS
make install
popd

echo Task [II-4] /$HOST_MINGW/mpc/
rm -rf $BUILDDIR_MINGW/mpc && mkdir -p $BUILDDIR_MINGW/mpc
pushd $BUILDDIR_MINGW/mpc

$SRCDIR/$MPC/configure --build=$BUILD \
    --host=$HOST_MINGW \
    --target=$TARGET \
    --prefix=$BUILDDIR_MINGW/host-libs/usr \
    --disable-shared \
    --disable-nls \
    --with-gmp=$BUILDDIR_MINGW/host-libs/usr \
    --with-mpfr=$BUILDDIR_MINGW/host-libs/usr

make -j$JOBS
make install
popd

echo Task [II-5] /$HOST_MINGW/isl/
rm -rf $BUILDDIR_MINGW/isl && mkdir -p $BUILDDIR_MINGW/isl
pushd $BUILDDIR_MINGW/isl

$SRCDIR/$ISL/configure --build=$BUILD \
    --host=$HOST_MINGW \
    --target=$TARGET \
    --prefix=$BUILDDIR_MINGW/host-libs/usr  \
    --disable-shared \
    --disable-nls \
    --with-gmp-prefix=$BUILDDIR_MINGW/host-libs/usr

make
make install
popd

echo Task [II-6] /$HOST_MINGW/cloog/
rm -rf $BUILDDIR_MINGW/cloog && mkdir -p $BUILDDIR_MINGW/cloog
pushd $BUILDDIR_MINGW/cloog

$SRCDIR/$CLOOG/configure --build=$BUILD \
    --host=$HOST_MINGW \
    --target=$TARGET \
    --prefix=$BUILDDIR_MINGW/host-libs/usr \
    --disable-shared \
    --disable-nls \
    --with-bits=gmp \
    --with-host-libstdcxx='-lstdc++'    \
    --with-gmp-prefix=$BUILDDIR_MINGW/host-libs/usr \
    --with-isl-prefix=$BUILDDIR_MINGW/host-libs/usr

make -j$JOBS
make install
popd

echo Task [II-7] /$HOST_MINGW/libelf/
rm -rf $BUILDDIR_MINGW/libelf && mkdir -p $BUILDDIR_MINGW/libelf
pushd $BUILDDIR_MINGW/libelf

$SRCDIR/$LIBELF/configure --build=$BUILD \
    --host=$HOST_MINGW \
    --target=$TARGET \
    --prefix=$BUILDDIR_MINGW/host-libs/usr \
    --disable-shared \
    --disable-nls

make -j$JOBS
make install
popd

echo Task [II-8] /$HOST_MINGW/expat/
rm -rf $BUILDDIR_MINGW/expat && mkdir -p $BUILDDIR_MINGW/expat
pushd $BUILDDIR_MINGW/expat

$SRCDIR/$EXPAT/configure --build=$BUILD \
    --host=$HOST_MINGW \
    --target=$TARGET \
    --prefix=$BUILDDIR_MINGW/host-libs/usr \
    --disable-shared \
    --disable-nls

make -j$JOBS
make install
popd
restoreenv