diff --git a/resources/profiles/Anker.ini b/resources/profiles/Anker.ini
index c6e2459aaf7..c9778d935c7 100644
--- a/resources/profiles/Anker.ini
+++ b/resources/profiles/Anker.ini
@@ -15,7 +15,6 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Anker/
[printer_model:M5]
name = AnkerMake M5
variants = 0.4
@@ -675,4 +674,4 @@ printer_variant = 0.4
min_layer_height = 0.08
max_layer_height = 0.32
retract_lift_above = 0
-default_print_profile = 0.2 mm OPTIMAL (0.4 mm nozzle) @ANKER
\ No newline at end of file
+default_print_profile = 0.2 mm OPTIMAL (0.4 mm nozzle) @ANKER
diff --git a/resources/profiles/Anycubic.ini b/resources/profiles/Anycubic.ini
index d6ddc9f5461..b51a5ee0633 100644
--- a/resources/profiles/Anycubic.ini
+++ b/resources/profiles/Anycubic.ini
@@ -15,7 +15,6 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Anycubic/
[printer_model:AKLP]
name = Anycubic Kossel Linear Plus
variants = 0.4
@@ -25,7 +24,6 @@ bed_model = AKLP_Bed.stl
bed_texture = AK.svg
default_materials = Generic PLA @AKOSSEL; Generic PETG @AKOSSEL; Generic ABS @AKOSSEL
-thumbnail = AKLP_thumbnail.png
[printer_model:AK]
name = Anycubic Kossel Pulley (Linear)
variants = 0.4
@@ -35,7 +33,6 @@ bed_model = AK_Bed.stl
bed_texture = AK.svg
default_materials = Generic PLA @AKOSSEL; Generic PETG @AKOSSEL; Generic ABS @AKOSSEL
-thumbnail = AK_thumbnail.png
[printer_model:MEGA0]
name = Anycubic Mega Zero
variants = 0.4
@@ -45,7 +42,6 @@ bed_model = mega0_bed.stl
bed_texture = mega0.svg
default_materials = Generic PLA @MEGA0; Generic PETG @MEGA0; Anycubic PLA @MEGA0; Prusament PLA @MEGA0; Prusament PETG @MEGA0
-thumbnail = MEGA0_thumbnail.png
[printer_model:I3MEGA]
name = Anycubic i3 Mega
variants = 0.4
@@ -54,7 +50,6 @@ family = MEGA
bed_model = i3megas_bed.stl
bed_texture = i3megas.svg
-thumbnail = I3MEGA_thumbnail.png
[printer_model:I3MEGAS]
name = Anycubic i3 Mega S
variants = 0.4
@@ -63,7 +58,6 @@ family = MEGA
bed_model = i3megas_bed.stl
bed_texture = i3megas.svg
-thumbnail = I3MEGAS_thumbnail.png
[printer_model:4MAXPRO20]
name = Anycubic 4Max Pro 2.0
variants = 0.4
@@ -73,7 +67,6 @@ bed_model = 4MAXPRO20_bed.stl
bed_texture = 4MAXPRO20_texture.svg
default_materials = Generic PLA @4Max Pro 2.0; Generic TPU @4Max Pro 2.0; Generic ABS @4Max Pro 2.0
-thumbnail = 4MAXPRO20_thumbnail.png
[printer_model:PREDATOR]
name = Anycubic Predator
variants = 0.4; 0.6; 0.8
@@ -89,7 +82,6 @@ default_materials = Generic PLA @PREDATOR; Generic PETG @PREDATOR; Generic ABS @
## Initial PR: https://github.com/prusa3d/PrusaSlicer/pull/4220
# Common print preset
-thumbnail = PREDATOR_thumbnail.png
[print:*common_akossel*]
avoid_crossing_perimeters = 0
bottom_solid_min_thickness = 0.5
@@ -2325,3 +2317,4 @@ use_volumetric_e = 0
variable_layer_height = 1
wipe = 0
z_offset = 0
+
diff --git a/resources/profiles/AnycubicSLA.ini b/resources/profiles/AnycubicSLA.ini
index 26c92729941..731fb1cea60 100644
--- a/resources/profiles/AnycubicSLA.ini
+++ b/resources/profiles/AnycubicSLA.ini
@@ -14,7 +14,6 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.
-config_url = http://10.24.3.3:8001/v1/repos/non-prusa-sla/AnycubicSLA/
[printer_model:PHOTON MONO]
name = Photon Mono
variants = default
@@ -22,7 +21,6 @@ technology = SLA
family = PHOTON MONO
default_materials = Generic Blue Resin @MONO 0.05
-thumbnail = PHOTON MONO_thumbnail.png
[printer_model:PHOTON MONO X]
name = Photon Mono X
variants = default
@@ -30,7 +28,6 @@ technology = SLA
family = PHOTON MONO
default_materials = Generic Blue Resin @MONO 0.05
-thumbnail = PHOTON MONO X_thumbnail.png
[printer_model:PHOTON MONO X 6K]
name = Photon Mono X 6K
variants = default
@@ -38,7 +35,6 @@ technology = SLA
family = PHOTON MONO
default_materials = Anycubic Plant-based UV Resin Grey 23 @MONO 0.05
-thumbnail = PHOTON MONO X 6K_thumbnail.png
[printer_model:PHOTON MONO SE]
name = Photon Mono SE
variants = default
@@ -48,7 +44,6 @@ default_materials = Generic Blue Resin @MONO 0.05
## SLA printers
-thumbnail = PHOTON MONO SE_thumbnail.png
[sla_print:*common print ANYCUBIC SLA*]
compatible_printers_condition = printer_notes=~/.*VENDOR_ANYCUBIC.*/ and printer_notes=~/.*SLA.*/
layer_height = 0.05
@@ -271,3 +266,4 @@ printer_correction = 1,1,1
gamma_correction = 1
; area_fill = 45
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.'\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTONMONOX6K\n
+
diff --git a/resources/profiles/Artillery.ini b/resources/profiles/Artillery.ini
index b27735c90d3..8d92aa6ef7e 100644
--- a/resources/profiles/Artillery.ini
+++ b/resources/profiles/Artillery.ini
@@ -26,7 +26,6 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
## PRINTER ##
#############
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Artillery/
[printer_model:X1]
name = Artillery Sidewinder X1
variants = 0.4
@@ -35,7 +34,6 @@ bed_model = bed-x1.stl
bed_texture = bed-x1.png
default_materials = Generic PLA @Artillery; Generic ABS @Artillery; Generic PETG @Artillery; Generic TPU @Artillery
-thumbnail = X1_thumbnail.png
[printer_model:Genius]
name = Artillery Genius
variants = 0.4
@@ -44,7 +42,6 @@ bed_model = bed-genius.stl
bed_texture = bed-genius.png
default_materials = Generic PLA @Artillery; Generic ABS @Artillery; Generic PETG @Artillery; Generic TPU @Artillery
-thumbnail = Genius_thumbnail.png
[printer_model:Hornet]
name = Artillery Hornet
variants = 0.4
@@ -53,7 +50,6 @@ bed_model = bed-hornet.stl
bed_texture = bed-hornet.png
default_materials = Generic PLA @Artillery; Generic ABS @Artillery; Generic PETG @Artillery; Generic TPU @Artillery
-thumbnail = Hornet_thumbnail.png
[printer_model:X3 Plus]
name = Artillery Sidewinder X3 Plus
variants = 0.4
@@ -62,7 +58,6 @@ bed_model = bed-x3-plus.stl
bed_texture = bed-x1.png
default_materials = Artillery ABS @X3; Artillery PETG @X3; Artillery PLA @X3; Artillery PLA HS @X3; Artillery PLA Silk @X3; Artillery TPU @X3
-thumbnail = X3 Plus_thumbnail.png
[printer_model:X3 Pro]
name = Artillery Sidewinder X3 Pro
variants = 0.4
@@ -71,7 +66,6 @@ bed_model = bed-x3-pro.stl
bed_texture = bed-x1.png
default_materials = Artillery ABS @X3; Artillery PETG @X3; Artillery PLA @X3; Artillery PLA HS @X3; Artillery PLA Silk @X3; Artillery TPU @X3
-thumbnail = X3 Pro_thumbnail.png
[printer_model:X4 Plus]
name = Artillery Sidewinder X4 Plus
variants = 0.4
@@ -80,7 +74,6 @@ bed_model = bed-x4-plus.stl
bed_texture = bed-x1.png
default_materials = Artillery ABS @X4; Artillery PETG @X4; Artillery PLA & PLA HS @X4; Artillery PLA+ @X4; Artillery PLA Silk @X4; Artillery TPU @X4
-thumbnail = X4 Plus_thumbnail.png
[printer_model:X4 Pro]
name = Artillery Sidewinder X4 Pro
variants = 0.4
@@ -89,7 +82,6 @@ bed_model = bed-x4-pro.stl
bed_texture = bed-x1.png
default_materials = Artillery ABS @X4; Artillery PETG @X4; Artillery PLA & PLA HS @X4; Artillery PLA+ @X4; Artillery PLA Silk @X4; Artillery TPU @X4
-thumbnail = X4 Pro_thumbnail.png
[printer_model:X4 Max]
name = Artillery Sidewinder X4 Max
variants = 0.4
@@ -99,7 +91,6 @@ bed_texture = bed-x1.png
default_materials = Artillery ABS @X4; Artillery PETG @X4; Artillery PLA & PLA HS @X4; Artillery PLA+ @X4; Artillery PLA Silk @X4; Artillery TPU @X4
# Common printer preset
-thumbnail = X4 Max_thumbnail.png
[printer:*common*]
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0
between_objects_gcode =
@@ -1245,4 +1236,4 @@ filament_retract_length = 1.5
filament_type = TPU
first_layer_bed_temperature = 70
first_layer_temperature = 215
-temperature = 215
\ No newline at end of file
+temperature = 215
diff --git a/resources/profiles/BIBO.ini b/resources/profiles/BIBO.ini
index a64a7239942..bbfc14accd3 100644
--- a/resources/profiles/BIBO.ini
+++ b/resources/profiles/BIBO.ini
@@ -14,7 +14,6 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/BIBO/
[printer_model:BIBO2]
name = BIBO2 Touch
variants = 0.4
@@ -28,7 +27,6 @@ default_materials = Generic PLA @BIBO2; Generic PETG @BIBO2; Generic ABS @BIBO2;
# not make it into the user interface.
# Common print preset
-thumbnail = BIBO2_thumbnail.png
[print:*common*]
avoid_crossing_perimeters = 0
bottom_fill_pattern = rectilinear
@@ -872,4 +870,4 @@ bed_shape = -33x-93,0x-93,0x93,-33x93
#bed_texture = BIBO2.svg
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nM104 S{temperature[0]} T0 ; set 1st nozzle heater to print temperature\nG92 E0\n
start_gcode = ;Start code PrusaSlicer BIBO 2 printers E2 only (i.e. T1)\nM420 S1 ; Turn on Ditto Printing\nG21 ; set units to metric\nG90 ; absolute positioning\nM107 ; start with the fan off\nM140 S{first_layer_bed_temperature[0] - 5} ; set bed temp\nM105 ; Report Temperatures\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp\nM104 S{first_layer_temperature[0]} T0 ; set 1st nozzle heater to ditto print temperature\nM104 S{first_layer_temperature[0]} T1 ; set 2nd nozzle heater to first layer temperature\nM105 ; Report Temperatures\nM109 S{first_layer_temperature[0]} T0 ; set 1st nozzle heater to ditto printing temperature\nM109 S{first_layer_temperature[0]} T1 ; Wait for 2nd nozzle heater to first layer temperature\nM105 ; Report Temperatures\nT0 ; Start at T0 to avoid extruder nozzle offset issues\nG28 X0 Y0 ; move X/Y to min endstops\nG28 Z0 ; move Z to min endstops\nG1 Z2 F400 ; move the print bed down 2mm\nG92 E0.0 ; zero the current extruder coordinate\nG1 Y0 F1200 E0 ; move Y to min endstop and reset extruder\nG92 E0.0 ; zero the current extruder coordinate\nT1 ; switch to tool position T1\nG92 E0.0 ; zero the current extruder coordinate\nM117 E2 nozzle wipe... ; Put Nozzle wipe message on screen, Attempt Nozzle Wipe (for ooze free startup)\nG1 X-15.0 Y-92.9 Z0.3 F2400.0 ; move to start-line position\nG1 X15.0 Y-92.9 Z0.3 F1000.0 E2 ; draw 1st line\nG1 X15.0 Y-92.6 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92.6 Z0.3 F1000.0 E4 ; draw 2nd line\nG1 X-15.0 Y-92.3 Z0.3 F3000.0 ; move to side a little\nG1 X15.0 Y-92.3 Z0.3 F1000.0 E6 ; draw 3rd line\nG1 X15.0 Y-92 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92 Z0.3 F1000.0 E8 ; draw 4th line\nG92 E0.0 ; reset extruder coordinate to zero before printing\nM117 BIBO Now Printing from E2... ; Put now printing message on screen
-end_gcode = ;BIBO End GCode\nM107 ; turn fans off\nG91 ; Relative positioning\nG1 Z1 F100\nM140 S0 ; Disable heated bed\nM104 T0 S0 ; extruder T0 heater off\nM104 T1 S0 ; extruder T1 heater off\nG1 Z+0.5 X-20 Y-20 F300 ; move Z down then move print head a bit out of the way\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nG90 ; Absolute positioning\nG92 E0.0 ; Reset extruder position\nM84 ; Turn steppers off\nM420 S0 ; Turn off Ditto Printing function\nM117 BIBO Print complete ; Put print complete message on screen
\ No newline at end of file
+end_gcode = ;BIBO End GCode\nM107 ; turn fans off\nG91 ; Relative positioning\nG1 Z1 F100\nM140 S0 ; Disable heated bed\nM104 T0 S0 ; extruder T0 heater off\nM104 T1 S0 ; extruder T1 heater off\nG1 Z+0.5 X-20 Y-20 F300 ; move Z down then move print head a bit out of the way\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nG90 ; Absolute positioning\nG92 E0.0 ; Reset extruder position\nM84 ; Turn steppers off\nM420 S0 ; Turn off Ditto Printing function\nM117 BIBO Print complete ; Put print complete message on screen
diff --git a/resources/profiles/BIQU.ini b/resources/profiles/BIQU.ini
index 647d118d825..2fe2567af38 100644
--- a/resources/profiles/BIQU.ini
+++ b/resources/profiles/BIQU.ini
@@ -12,7 +12,6 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/BIQU/
[printer_model:BIQUBX]
name = BIQU BX
variants = 0.4
@@ -25,7 +24,6 @@ default_materials = Generic PLA @BIQU; Generic PETG @BIQU; Generic ABS @BIQU
# not make it into the user interface.
# Common print preset
-thumbnail = BIQUBX_thumbnail.png
[print:*common*]
avoid_crossing_perimeters = 0
bottom_fill_pattern = monotonic
diff --git a/resources/profiles/CocoaPress.ini b/resources/profiles/CocoaPress.ini
index 096417997c0..9bd5fc71a00 100644
--- a/resources/profiles/CocoaPress.ini
+++ b/resources/profiles/CocoaPress.ini
@@ -18,7 +18,6 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
# All presets starting with asterisk, for example *common*, are intermediate and they will
# not make it into the user interface.
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/CocoaPress/
[printer_model:Cocoa_Press]
name = Cocoa Press
variants = 0.8; 1.6
@@ -601,4 +600,4 @@ printer_model = Cocoa_Press
[printer:*common*]
default_filament_profile = "Cocoa Press Chocolates"
printer_notes = PRINTER_VENDOR_COCOA_PRESS\nPRINTER_MODEL_MINICHEF\nPRINTER_MATERIAL_PASTE\nNO_TEMPLATES
-gcode_flavor = marlin2
\ No newline at end of file
+gcode_flavor = marlin2
diff --git a/resources/profiles/Creality.ini b/resources/profiles/Creality.ini
index 8e2b4605b49..7902f38e932 100644
--- a/resources/profiles/Creality.ini
+++ b/resources/profiles/Creality.ini
@@ -15,7 +15,6 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Creality/
[printer_model:ENDER3]
name = Creality Ender-3
variants = 0.4; 0.3; 0.5; 0.6
@@ -25,7 +24,6 @@ bed_model = ender3_bed.stl
bed_texture = ender3.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = ENDER3_thumbnail.png
[printer_model:ENDER3BLTOUCH]
name = Creality Ender-3 BLTouch
variants = 0.4; 0.3; 0.5; 0.6
@@ -35,7 +33,6 @@ bed_model = ender3_bed.stl
bed_texture = ender3.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = ENDER3BLTOUCH_thumbnail.png
[printer_model:ENDER3PRO]
name = Creality Ender-3 Pro
variants = 0.4; 0.3; 0.5; 0.6
@@ -45,7 +42,6 @@ bed_model = ender3_bed.stl
bed_texture = ender3.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = ENDER3PRO_thumbnail.png
[printer_model:ENDER3NEO]
name = Creality Ender-3 Neo
variants = 0.4; 0.3; 0.5; 0.6
@@ -55,7 +51,6 @@ bed_model = ender3_bed.stl
bed_texture = ender3.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = ENDER3NEO_thumbnail.png
[printer_model:ENDER3V2]
name = Creality Ender-3 V2
variants = 0.4; 0.3; 0.5; 0.6
@@ -65,7 +60,6 @@ bed_model = ender3v2_bed.stl
bed_texture = ender3v2.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = ENDER3V2_thumbnail.png
[printer_model:ENDER3V2NEO]
name = Creality Ender-3 V2 Neo
variants = 0.4; 0.3; 0.5; 0.6
@@ -75,7 +69,6 @@ bed_model = ender3v2_bed.stl
bed_texture = ender3v2.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = ENDER3V2NEO_thumbnail.png
[printer_model:ENDER3S1]
name = Creality Ender-3 S1
variants = 0.4; 0.3; 0.5; 0.6
@@ -85,7 +78,6 @@ bed_model = ender3v2_bed.stl
bed_texture = ender3v2.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = ENDER3S1_thumbnail.png
[printer_model:ENDER3S1PRO]
name = Creality Ender-3 S1 Pro
variants = 0.4; 0.3; 0.5; 0.6
@@ -95,7 +87,6 @@ bed_model = ender3v2_bed.stl
bed_texture = ender3v2.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = ENDER3S1PRO_thumbnail.png
[printer_model:ENDER3S1PLUS]
name = Creality Ender-3 S1 Plus
variants = 0.4; 0.3; 0.5; 0.6
@@ -105,7 +96,6 @@ bed_model = cr10v2_bed.stl
bed_texture = cr10spro.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = ENDER3S1PLUS_thumbnail.png
[printer_model:ENDER3MAX]
name = Creality Ender-3 Max
variants = 0.4; 0.3; 0.5; 0.6
@@ -115,7 +105,6 @@ bed_model = cr10v2_bed.stl
bed_texture = cr10spro.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = ENDER3MAX_thumbnail.png
[printer_model:ENDER3MAXNEO]
name = Creality Ender-3 Max Neo
variants = 0.4; 0.3; 0.5; 0.6
@@ -125,7 +114,6 @@ bed_model = cr10v2_bed.stl
bed_texture = cr10spro.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = ENDER3MAXNEO_thumbnail.png
[printer_model:ENDER4]
name = Creality Ender-4
variants = 0.4; 0.3; 0.5; 0.6
@@ -135,7 +123,6 @@ bed_model = ender3v2_bed.stl
bed_texture = ender3v2.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = ENDER4_thumbnail.png
[printer_model:ENDER5]
name = Creality Ender-5
variants = 0.4; 0.3; 0.5; 0.6
@@ -145,7 +132,6 @@ bed_model = ender3_bed.stl
bed_texture = ender3.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = ENDER5_thumbnail.png
[printer_model:ENDER5PRO]
name = Creality Ender-5 Pro
variants = 0.4; 0.3; 0.5; 0.6
@@ -155,7 +141,6 @@ bed_model = ender3_bed.stl
bed_texture = ender3.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = ENDER5PRO_thumbnail.png
[printer_model:ENDER5PLUS]
name = Creality Ender-5 Plus
variants = 0.4; 0.3; 0.5; 0.6
@@ -165,7 +150,6 @@ bed_model = ender5plus_bed.stl
bed_texture = ender5plus.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = ENDER5PLUS_thumbnail.png
[printer_model:ENDER5S1]
name = Creality Ender-5 S1
variants = 0.4; 0.3; 0.5; 0.6
@@ -175,7 +159,6 @@ bed_model = ender3_bed.stl
bed_texture = ender3.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = ENDER5S1_thumbnail.png
[printer_model:ENDER6]
name = Creality Ender-6
variants = 0.4; 0.3; 0.5; 0.6
@@ -185,7 +168,6 @@ bed_model = ender6_bed.stl
bed_texture = ender6.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = ENDER6_thumbnail.png
[printer_model:ENDER7]
name = Creality Ender-7
variants = 0.4; 0.3; 0.5; 0.6
@@ -195,7 +177,6 @@ bed_model = ender7_bed.stl
bed_texture = ender7.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = ENDER7_thumbnail.png
[printer_model:ENDER2]
name = Creality Ender-2
variants = 0.4; 0.3; 0.5; 0.6
@@ -205,7 +186,6 @@ bed_model = ender2_bed.stl
bed_texture = ender2.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = ENDER2_thumbnail.png
[printer_model:ENDER2PRO]
name = Creality Ender-2 Pro
variants = 0.4; 0.3; 0.5; 0.6
@@ -215,7 +195,6 @@ bed_model = ender2pro_bed.stl
bed_texture = ender2pro.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = ENDER2PRO_thumbnail.png
[printer_model:CR5PRO]
name = Creality CR-5 Pro
variants = 0.4; 0.3; 0.5; 0.6
@@ -225,7 +204,6 @@ bed_model = cr5pro_bed.stl
bed_texture = cr5pro.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = CR5PRO_thumbnail.png
[printer_model:CR5PROH]
name = Creality CR-5 Pro H
variants = 0.4; 0.3; 0.5; 0.6
@@ -235,7 +213,6 @@ bed_model = cr5pro_bed.stl
bed_texture = cr5pro.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = CR5PROH_thumbnail.png
[printer_model:CR6SE]
name = Creality CR-6 SE
variants = 0.4; 0.3; 0.5; 0.6
@@ -245,7 +222,6 @@ bed_model = cr6se_bed.stl
bed_texture = cr6se.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = CR6SE_thumbnail.png
[printer_model:CR6MAX]
name = Creality CR-6 Max
variants = 0.4; 0.3; 0.5; 0.6
@@ -255,7 +231,6 @@ bed_model = cr10s4_bed.stl
bed_texture = cr10s4.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = CR6MAX_thumbnail.png
[printer_model:CR10SMART]
name = Creality CR-10 SMART
variants = 0.4; 0.3; 0.5; 0.6
@@ -265,7 +240,6 @@ bed_model = cr10v2_bed.stl
bed_texture = cr10spro.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = CR10SMART_thumbnail.png
[printer_model:CR10SMARTPRO]
name = Creality CR-10 SMART Pro
variants = 0.4; 0.3; 0.5; 0.6
@@ -275,7 +249,6 @@ bed_model = cr10v2_bed.stl
bed_texture = cr10spro.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = CR10SMARTPRO_thumbnail.png
[printer_model:CR10MINI]
name = Creality CR-10 Mini
variants = 0.4; 0.3; 0.5; 0.6
@@ -285,7 +258,6 @@ bed_model = cr10mini_bed.stl
bed_texture = cr10mini.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = CR10MINI_thumbnail.png
[printer_model:CR10MAX]
name = Creality CR-10 Max
variants = 0.4; 0.3; 0.5; 0.6
@@ -295,7 +267,6 @@ bed_model = cr10max_bed.stl
bed_texture = cr10max.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = CR10MAX_thumbnail.png
[printer_model:CR10]
name = Creality CR-10
variants = 0.4; 0.3; 0.5; 0.6
@@ -305,7 +276,6 @@ bed_model = cr10_bed.stl
bed_texture = cr10.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = CR10_thumbnail.png
[printer_model:CR10V2]
name = Creality CR-10 V2
variants = 0.4; 0.3; 0.5; 0.6
@@ -315,7 +285,6 @@ bed_model = cr10v2_bed.stl
bed_texture = cr10.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = CR10V2_thumbnail.png
[printer_model:CR10V3]
name = Creality CR-10 V3
variants = 0.4; 0.3; 0.5; 0.6
@@ -325,7 +294,6 @@ bed_model = cr10v2_bed.stl
bed_texture = cr10.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = CR10V3_thumbnail.png
[printer_model:CR10S]
name = Creality CR-10 S
variants = 0.4; 0.3; 0.5; 0.6
@@ -335,7 +303,6 @@ bed_model = cr10_bed.stl
bed_texture = cr10.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = CR10S_thumbnail.png
[printer_model:CR10SPRO]
name = Creality CR-10 S Pro
variants = 0.4; 0.3; 0.5; 0.6
@@ -345,7 +312,6 @@ bed_model = cr10v2_bed.stl
bed_texture = cr10spro.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = CR10SPRO_thumbnail.png
[printer_model:CR10SPROV2]
name = Creality CR-10 S Pro V2
variants = 0.4; 0.3; 0.5; 0.6
@@ -355,7 +321,6 @@ bed_model = cr10v2_bed.stl
bed_texture = cr10.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = CR10SPROV2_thumbnail.png
[printer_model:CR10S4]
name = Creality CR-10 S4
variants = 0.4; 0.3; 0.5; 0.6
@@ -365,7 +330,6 @@ bed_model = cr10s4_bed.stl
bed_texture = cr10s4.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = CR10S4_thumbnail.png
[printer_model:CR10S5]
name = Creality CR-10 S5
variants = 0.4; 0.3; 0.5; 0.6
@@ -375,7 +339,6 @@ bed_model = cr10s5_bed.stl
bed_texture = cr10s5.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = CR10S5_thumbnail.png
[printer_model:CR20]
name = Creality CR-20
variants = 0.4; 0.3; 0.5; 0.6
@@ -385,7 +348,6 @@ bed_model = ender3_bed.stl
bed_texture = cr20.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = CR20_thumbnail.png
[printer_model:CR20PRO]
name = Creality CR-20 Pro
variants = 0.4; 0.3; 0.5; 0.6
@@ -395,7 +357,6 @@ bed_model = ender3_bed.stl
bed_texture = cr20.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = CR20PRO_thumbnail.png
[printer_model:CR200B]
name = Creality CR-200B
variants = 0.4; 0.3; 0.5; 0.6
@@ -405,7 +366,6 @@ bed_model = cr200b_bed.stl
bed_texture = cr200b.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = CR200B_thumbnail.png
[printer_model:CR8]
name = Creality CR-8
variants = 0.4; 0.3; 0.5; 0.6
@@ -415,7 +375,6 @@ bed_model = cr8_bed.stl
bed_texture = cr8.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = CR8_thumbnail.png
[printer_model:SERMOOND1]
name = Creality Sermoon-D1
variants = 0.4; 0.3; 0.5; 0.6
@@ -425,7 +384,6 @@ bed_model = sermoond1_bed.stl
bed_texture = sermoond1.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = SERMOOND1_thumbnail.png
[printer_model:SERMOONV1]
name = Creality Sermoon-V1
variants = 0.4; 0.3; 0.5; 0.6
@@ -435,7 +393,6 @@ bed_model = sermoonv1_bed.stl
bed_texture = sermoonv1.svg
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
-thumbnail = SERMOONV1_thumbnail.png
[printer_model:SERMOONV1PRO]
name = Creality Sermoon-V1 Pro
variants = 0.4; 0.3; 0.5; 0.6
@@ -451,7 +408,6 @@ default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @
# not make it into the user interface.
# Common print preset
-thumbnail = SERMOONV1PRO_thumbnail.png
[print:*common*]
avoid_crossing_perimeters = 0
bridge_acceleration = 250
@@ -2709,4 +2665,4 @@ inherits = *SERMOONV1PRO*; *0.4nozzle*
inherits = *SERMOONV1PRO*; *0.5nozzle*
[printer:Creality Sermoon-V1 Pro (0.6 mm nozzle)]
-inherits = *SERMOONV1PRO*; *0.6nozzle*
\ No newline at end of file
+inherits = *SERMOONV1PRO*; *0.6nozzle*
diff --git a/resources/profiles/Elegoo.ini b/resources/profiles/Elegoo.ini
index d969060e83e..fa58992b312 100644
--- a/resources/profiles/Elegoo.ini
+++ b/resources/profiles/Elegoo.ini
@@ -14,7 +14,6 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Elegoo/
[printer_model:NEPTUNE1]
name = Elegoo Neptune-1
variants = 0.4
@@ -24,7 +23,6 @@ bed_model =
bed_texture =
default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO
-thumbnail = NEPTUNE1_thumbnail.png
[printer_model:NEPTUNE2]
name = Elegoo Neptune-2
variants = 0.4
@@ -34,7 +32,6 @@ bed_model =
bed_texture =
default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO
-thumbnail = NEPTUNE2_thumbnail.png
[printer_model:NEPTUNE2D]
name = Elegoo Neptune-2D
variants = 0.4
@@ -44,7 +41,6 @@ bed_model =
bed_texture =
default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO
-thumbnail = NEPTUNE2D_thumbnail.png
[printer_model:NEPTUNE2S]
name = Elegoo Neptune-2S
variants = 0.4
@@ -54,7 +50,6 @@ bed_model =
bed_texture =
default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO
-thumbnail = NEPTUNE2S_thumbnail.png
[printer_model:NEPTUNE3]
name = Elegoo Neptune-3
variants = 0.4
@@ -64,7 +59,6 @@ bed_model =
bed_texture =
default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO
-thumbnail = NEPTUNE3_thumbnail.png
[printer_model:NEPTUNE3MAX]
name = Elegoo Neptune-3 Max
variants = 0.4
@@ -74,7 +68,6 @@ bed_model =
bed_texture =
default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO
-thumbnail = NEPTUNE3MAX_thumbnail.png
[printer_model:NEPTUNE3PLUS]
name = Elegoo Neptune-3 Plus
variants = 0.4
@@ -84,7 +77,6 @@ bed_model =
bed_texture =
default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO
-thumbnail = NEPTUNE3PLUS_thumbnail.png
[printer_model:NEPTUNE3PRO]
name = Elegoo Neptune-3 Pro
variants = 0.4
@@ -94,7 +86,6 @@ bed_model =
bed_texture =
default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO
-thumbnail = NEPTUNE3PRO_thumbnail.png
[printer_model:NEPTUNEX]
name = Elegoo Neptune-X
variants = 0.4
@@ -108,7 +99,6 @@ default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEG
# not make it into the user interface.
# Common print preset
-thumbnail = NEPTUNEX_thumbnail.png
[print:*common*]
avoid_crossing_perimeters = 0
bridge_angle = 0
@@ -604,3 +594,4 @@ retract_length = 2.5
retract_speed = 25
printer_model = NEPTUNE3PRO
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE3PRO
+
diff --git a/resources/profiles/FLSun.ini b/resources/profiles/FLSun.ini
index 342dbd32f55..9247cd70e12 100644
--- a/resources/profiles/FLSun.ini
+++ b/resources/profiles/FLSun.ini
@@ -17,7 +17,6 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/FLSun/
[printer_model:QQSP]
name = FLSun QQS Pro
variants = 0.4; 0.6
@@ -26,7 +25,6 @@ bed_model = QQSP_bed.stl
bed_texture = QQSP.svg
default_materials = Generic PLA @FLSUN; Generic PETG @FLSUN; Generic ABS @FLSUN; Generic SPLA @FLSUN; Generic FLEX @FLSUN
-thumbnail = QQSP_thumbnail.png
[printer_model:Q5]
name = FLSun Q5
variants = 0.4; 0.6
@@ -40,7 +38,6 @@ default_materials = Generic PLA @FLSUN; Generic PETG @FLSUN; Generic ABS @FLSUN;
#########################################
# Common print preset
-thumbnail = Q5_thumbnail.png
[print:*common_flsunq*]
avoid_crossing_perimeters = 1
avoid_crossing_perimeters_max_detour = 0
@@ -843,4 +840,4 @@ retract_before_travel = 1
#########################################
####### end common print presets ########
-#########################################
\ No newline at end of file
+#########################################
diff --git a/resources/profiles/Geeetech.ini b/resources/profiles/Geeetech.ini
index 73a5b00b362..27c4f0fd460 100644
--- a/resources/profiles/Geeetech.ini
+++ b/resources/profiles/Geeetech.ini
@@ -16,7 +16,6 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Geeetech/
[printer_model:Thunder]
name = Geeetech Thunder
variants = 0.4; 0.2; 0.6; 0.8
@@ -26,7 +25,6 @@ bed_model = 250x250.stl
bed_texture = 250x250.svg
default_materials = Thunder HS-PLA @Geeetech; Thunder PLA @Geeetech; Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
-thumbnail = Thunder_thumbnail.png
[printer_model:ThunderPro]
name = Geeetech Thunder Pro
variants = 0.4; 0.2; 0.6; 0.8
@@ -36,7 +34,6 @@ bed_model = 250x250.stl
bed_texture = 250x250.svg
default_materials = Thunder HS-PLA @Geeetech; Thunder PLA @Geeetech; Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
-thumbnail = ThunderPro_thumbnail.png
[printer_model:MizarS]
name = Geeetech Mizar S
variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
@@ -46,7 +43,6 @@ bed_model = 255x255.stl
bed_texture = 255x255.svg
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
-thumbnail = MizarS_thumbnail.png
[printer_model:MizarPro]
name = Geeetech Mizar Pro
variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
@@ -56,7 +52,6 @@ bed_model = 220x220.stl
bed_texture = 220x220.svg
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
-thumbnail = MizarPro_thumbnail.png
[printer_model:Mizar]
name = Geeetech Mizar
variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
@@ -66,7 +61,6 @@ bed_model = 220x220.stl
bed_texture = 220x220.svg
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
-thumbnail = Mizar_thumbnail.png
[printer_model:MizarMax]
name = Geeetech Mizar Max
variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
@@ -76,7 +70,6 @@ bed_model = 320x320.stl
bed_texture = 320x320.svg
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
-thumbnail = MizarMax_thumbnail.png
[printer_model:MizarM]
name = Geeetech Mizar M
variants = 0.4
@@ -95,7 +88,6 @@ default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @
#bed_texture = 255x255.svg
#default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
-thumbnail = MizarM_thumbnail.png
[printer_model:A10Pro]
name = Geeetech A10 Pro
variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
@@ -105,7 +97,6 @@ bed_model = 220x220.stl
bed_texture = 220x220.svg
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
-thumbnail = A10Pro_thumbnail.png
[printer_model:A10M]
name = Geeetech A10 M
variants = 0.4
@@ -115,7 +106,6 @@ bed_model = 220x220.stl
bed_texture = 220x220.svg
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
-thumbnail = A10M_thumbnail.png
[printer_model:A10T]
name = Geeetech A10 T
variants = 0.4
@@ -125,7 +115,6 @@ bed_model = 220x220.stl
bed_texture = 220x220.svg
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
-thumbnail = A10T_thumbnail.png
[printer_model:A20]
name = Geeetech A20
variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
@@ -135,7 +124,6 @@ bed_model = 250x250.stl
bed_texture = 250x250.svg
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
-thumbnail = A20_thumbnail.png
[printer_model:A20M]
name = Geeetech A20 M
variants = 0.4
@@ -145,7 +133,6 @@ bed_model = 250x250.stl
bed_texture = 250x250.svg
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
-thumbnail = A20M_thumbnail.png
[printer_model:A20T]
name = Geeetech A20 T
variants = 0.4
@@ -155,7 +142,6 @@ bed_model = 250x250.stl
bed_texture = 250x250.svg
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
-thumbnail = A20T_thumbnail.png
[printer_model:A30Pro]
name = Geeetech A30 Pro
variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
@@ -165,7 +151,6 @@ bed_model = 320x320.stl
bed_texture = 320x320.svg
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
-thumbnail = A30Pro_thumbnail.png
[printer_model:A30M]
name = Geeetech A30 M
variants = 0.4
@@ -175,7 +160,6 @@ bed_model = 320x320.stl
bed_texture = 320x320.svg
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
-thumbnail = A30M_thumbnail.png
[printer_model:A30T]
name = Geeetech A30 T
variants = 0.4
@@ -185,7 +169,6 @@ bed_model = 320x320.stl
bed_texture = 320x320.svg
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
-thumbnail = A30T_thumbnail.png
[printer_model:E180]
name = Geeetech E180
variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
@@ -195,7 +178,6 @@ bed_model = 125X130.stl
bed_texture = 125X130.svg
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
-thumbnail = E180_thumbnail.png
[printer_model:MeDucer]
name = Geeetech Me Ducer
variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
@@ -205,7 +187,6 @@ bed_model = 180X150.stl
bed_texture = 180X150.svg
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
-thumbnail = MeDucer_thumbnail.png
[printer_model:MeCreator]
name = Geeetech Me Creator
variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
@@ -215,7 +196,6 @@ bed_model = 150x150.stl
bed_texture = 150x150.svg
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
-thumbnail = MeCreator_thumbnail.png
[printer_model:MeCreator2]
name = Geeetech Me Creator2
variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
@@ -225,7 +205,6 @@ bed_model = 160x160.stl
bed_texture = 160x160.svg
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
-thumbnail = MeCreator2_thumbnail.png
[printer_model:GiantArmD200]
name = Geeetech GiantArmD200
variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
@@ -235,7 +214,6 @@ bed_model = 300x180.stl
bed_texture = 300x180.svg
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
-thumbnail = GiantArmD200_thumbnail.png
[printer_model:I3ProB]
name = Geeetech I3 ProB
variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
@@ -245,7 +223,6 @@ bed_model = 200x200.stl
bed_texture = 200x200.svg
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
-thumbnail = I3ProB_thumbnail.png
[printer_model:I3ProW]
name = Geeetech I3 ProW
variants = 0.4; 0.2; 0.3; 0.5; 0.6; 0.8
@@ -255,7 +232,6 @@ bed_model = 200x200.stl
bed_texture = 200x200.svg
default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @Geeetech; Generic TPU @Geeetech; Geeetech PLA @Geeetech; Geeetech PETG @Geeetech; Geeetech ABS @Geeetech
-thumbnail = I3ProW_thumbnail.png
[printer_model:I3ProC]
name = Geeetech I3 ProC
variants = 0.4
@@ -271,7 +247,6 @@ default_materials = Generic PLA @Geeetech; Generic PETG @Geeetech; Generic ABS @
####### Start ###print presets ########
#########################################
-thumbnail = I3ProC_thumbnail.png
[print:*common*]
# Print presets for common printers
avoid_crossing_perimeters = 0
diff --git a/resources/profiles/HartSmartProducts.idx b/resources/profiles/HartSmartProducts.idx
new file mode 100644
index 00000000000..c554d6b753b
--- /dev/null
+++ b/resources/profiles/HartSmartProducts.idx
@@ -0,0 +1,5 @@
+min_slic3r_version = 2.8.0-alpha0
+1.0.0 Updated for PS2.8.0.
+max_slic3r_version = 2.7.9
+min_slic3r_version = 2.7.0
+0.1.0 Initial release
diff --git a/resources/profiles/HartSmartProducts.ini b/resources/profiles/HartSmartProducts.ini
new file mode 100644
index 00000000000..97a339c7929
--- /dev/null
+++ b/resources/profiles/HartSmartProducts.ini
@@ -0,0 +1,1366 @@
+# Print profiles for HartSmart Products printers.
+
+[vendor]
+repo_id = non-prusa-fff
+# Vendor name will be shown by the Config Wizard.
+name = HartSmart Products
+# Configuration version of this file. Config file will only be installed, if the config_version differs.
+# This means, the server may force the PrusaSlicer configuration to be downgraded.
+config_version = 1.0.0
+config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/HartSmartProducts/
+
+# The printer models will be shown by the Configuration Wizard in this order,
+# also the first model installed & the first nozzle installed will be activated after install.
+# Printer model name will be shown by the installation wizard.
+
+[printer_model:HSP1-I]
+name = HSP1-I
+variants = 0.6; 0.4; 0.8; 1.0
+technology = FFF
+family = HSP1
+bed_model = hsp1_i_bed.stl
+bed_texture = hsp1_i.svg
+default_materials = Layer Line Engineering PLA @HSP1; Push Plastic PETG @HSP1; Push Plastic PLA @HSP1;
+
+[printer_model:HSP1-I Duplicator Mode]
+name = HSP1-I Duplicator Mode
+variants = 0.6; 0.4; 0.8; 1.0
+technology = FFF
+family = HSP1
+bed_model = hsp1_i_duplicator_bed.stl
+bed_texture = hsp1_i_duplicator.svg
+default_materials = Layer Line Engineering PLA @HSP1; Push Plastic PETG @HSP1; Push Plastic PLA @HSP1;
+
+# All presets starting with asterisk, for example *common*, are intermediate and they will
+# not make it into the user interface.
+
+#################### Common print presets ####################
+[print:*common*]
+# Layers and Perimeters
+perimeters = 2
+spiral_vase = 0
+
+top_solid_layers = 4
+bottom_solid_layers = 4
+top_solid_min_thickness = 0.9
+bottom_solid_min_thickness = 0.6
+
+extra_perimeters = 1
+extra_perimeters_on_overhangs = 0
+avoid_crossing_curled_overhangs = 1
+avoid_crossing_perimeters = 0
+thin_walls = 0
+thick_bridges = 0
+overhangs = 1
+
+seam_position = aligned
+staggered_inner_seams = 0
+external_perimeters_first = 0
+gap_fill_enabled = 0
+perimeter_generator = arachne
+
+fuzzy_skin = none
+fuzzy_skin_thickness = 0.3
+fuzzy_skin_point_dist = 0.8
+
+# Infill
+fill_density = 20%
+fill_pattern = cubic
+infill_anchor = 600%
+infill_anchor_max = 20
+top_fill_pattern = monotoniclines
+bottom_fill_pattern = monotonic
+
+ironing = 0
+ironing_type = top
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+
+infill_every_layers = 1
+
+solid_infill_every_layers = 0
+fill_angle = 45
+solid_infill_below_area = 10
+bridge_angle = 0
+only_retract_when_crossing_perimeters = 0
+infill_first = 0
+
+# Skirt and Brim
+skirts = 2
+skirt_distance = 3
+skirt_height = 1
+draft_shield = disabled
+min_skirt_length = 0
+
+brim_width = 0
+brim_separation = 0.1
+
+# Support Material
+support_material = 0
+support_material_auto = 1
+support_material_threshold = 50
+support_material_enforce_layers = 0
+raft_first_layer_density = 80%
+raft_first_layer_expansion = 3
+
+raft_layers = 0
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+
+support_material_style = grid
+support_material_contact_distance = 0.22
+support_material_bottom_contact_distance = 0
+support_material_pattern = rectilinear
+support_material_with_sheath = 0
+support_material_spacing = 4
+support_material_angle = 0
+support_material_closing_radius = 2
+support_material_interface_layers = 2
+support_material_bottom_interface_layers = 0
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0.3
+support_material_interface_contact_loops = 0
+support_material_buildplate_only = 0
+support_material_xy_spacing = 80%
+dont_support_bridges = 0
+support_material_synchronize_layers = 0
+
+support_tree_angle = 40
+support_tree_angle_slow = 30
+support_tree_branch_diameter = 2
+support_tree_branch_diameter_angle = 3
+support_tree_branch_diameter_double_wall = 0
+support_tree_tip_diameter = 0.6
+support_tree_branch_distance = 1
+support_tree_top_rate = 30%
+
+# Speed
+perimeter_speed = 80
+small_perimeter_speed = 40
+external_perimeter_speed = 40
+infill_speed = 300
+solid_infill_speed = 100
+top_solid_infill_speed = 50
+support_material_speed = 80
+support_material_interface_speed = 40
+gap_fill_speed = 0
+ironing_speed = 15
+
+enable_dynamic_overhang_speeds = 0
+overhang_speed_0 = 15
+overhang_speed_1 = 15
+overhang_speed_2 = 20
+overhang_speed_3 = 25
+
+travel_speed = 400
+travel_speed_z = 7.5
+
+first_layer_speed = 30
+first_layer_speed_over_raft = 30
+
+external_perimeter_acceleration = 500
+perimeter_acceleration = 1000
+top_solid_infill_acceleration = 2000
+solid_infill_acceleration = 5000
+infill_acceleration = 5000
+bridge_acceleration = 4000
+first_layer_acceleration = 1000
+first_layer_acceleration_over_raft = 1000
+travel_acceleration = 5000
+default_acceleration = 4000
+
+max_print_speed = 300
+max_volumetric_speed = 0
+
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+
+# Multiple Extruders
+perimeter_extruder = 1
+infill_extruder = 1
+solid_infill_extruder = 1
+support_material_extruder = 0
+support_material_interface_extruder = 0
+
+ooze_prevention = 0
+standby_temperature_delta = -5
+
+single_extruder_multi_material_priming = 0
+
+interface_shells = 0
+mmu_segmented_region_max_width = 0
+
+# Advanced
+extrusion_width = 0
+first_layer_extrusion_width = 0
+perimeter_extrusion_width = 0
+external_perimeter_extrusion_width = 0
+infill_extrusion_width = 0
+solid_infill_extrusion_width = 0
+top_infill_extrusion_width = 0
+support_material_extrusion_width = 0
+
+infill_overlap = 15%
+
+bridge_flow_ratio = 1
+
+slice_closing_radius = 0.049
+slicing_mode = regular
+resolution = 0
+gcode_resolution = 0.0125
+xy_size_compensation = 0
+elefant_foot_compensation = 0.2
+
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 100%
+wall_distribution_count = 1
+min_bead_width = 85%
+min_feature_size = 25%
+
+# Output Options
+complete_objects = 0
+extruder_clearance_height = 90
+extruder_clearance_radius = 95
+
+gcode_comments = 0
+gcode_label_objects = 1
+output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{filament_type[0]}_{print_time}.gcode
+
+threads = 12
+
+[print:*dual*]
+gcode_substitutions = "M220 S100";;;"Remove feedrate override resets";"G10 S(\\d+) P(\\d+)";"M568 P${2} S${1}";r;"RRF now uses M568 instead of G10";"M140 S(\d+) ; set bed temperature";;r;"Fix incorrect 2nd layer bed temp"
+
+[print:*duplicator*]
+gcode_substitutions = "M220 S100";;;"Remove feedrate override resets";"G10 S(\\d+) P(\\d+)";"M568 P2 S${1}";r;"RRF now uses M568 instead of G10"
+
+##################### Nozzle size presets ####################
+[print:*0.6n*]
+extrusion_width = 0.65
+perimeter_extrusion_width = 0.65
+external_perimeter_extrusion_width = 0.65
+infill_extrusion_width = 0.65
+solid_infill_extrusion_width = 0.65
+top_infill_extrusion_width = 0.6
+perimeter_speed = 80
+small_perimeter_speed = 40
+external_perimeter_speed = 40
+infill_speed = 300
+solid_infill_speed = 100
+top_solid_infill_speed = 50
+bridge_speed = 20
+first_layer_speed = 30
+first_layer_speed_over_raft = 30
+
+[print:*0.4n*]
+extrusion_width = 0.45
+perimeter_extrusion_width = 0.45
+external_perimeter_extrusion_width = 0.45
+infill_extrusion_width = 0.45
+solid_infill_extrusion_width = 0.45
+top_infill_extrusion_width = 0.4
+perimeter_speed = 80
+small_perimeter_speed = 40
+external_perimeter_speed = 40
+infill_speed = 300
+solid_infill_speed = 100
+top_solid_infill_speed = 50
+bridge_speed = 30
+first_layer_speed = 30
+first_layer_speed_over_raft = 30
+
+[print:*0.8n*]
+extrusion_width = 0.87
+perimeter_extrusion_width = 0.87
+external_perimeter_extrusion_width = 0.87
+infill_extrusion_width = 0.87
+solid_infill_extrusion_width = 0.87
+top_infill_extrusion_width = 0.8
+perimeter_speed = 60
+small_perimeter_speed = 30
+external_perimeter_speed = 30
+infill_speed = 300
+solid_infill_speed = 70
+top_solid_infill_speed = 30
+bridge_speed = 20
+first_layer_speed = 20
+first_layer_speed_over_raft = 20
+
+[print:*1.0n*]
+extrusion_width = 1.09
+perimeter_extrusion_width = 1.09
+external_perimeter_extrusion_width = 1.09
+infill_extrusion_width = 1.09
+solid_infill_extrusion_width = 1.09
+top_infill_extrusion_width = 1.0
+perimeter_speed = 60
+small_perimeter_speed = 30
+external_perimeter_speed = 30
+infill_speed = 300
+solid_infill_speed = 70
+top_solid_infill_speed = 30
+bridge_speed = 20
+first_layer_speed = 20
+first_layer_speed_over_raft = 20
+
+################# Nozzle size Support presets ################
+[print:*0.6n Support*]
+first_layer_extrusion_width = 0.65
+support_material_extrusion_width = 0.57
+support_material_spacing = 3
+support_material_interface_spacing = 0.3
+support_material_contact_distance = 0.25
+support_material_speed = 80
+support_material_interface_speed = 40
+support_tree_angle = 40
+support_tree_angle_slow = 30
+support_tree_branch_diameter = 3
+support_tree_branch_diameter_angle = 5
+support_tree_branch_diameter_double_wall = 4.5
+support_tree_branch_distance = 1
+support_tree_tip_diameter = 1.8
+support_tree_top_rate = 30%
+
+[print:*0.4n Support*]
+first_layer_extrusion_width = 0.42
+support_material_extrusion_width = 0.38
+support_material_spacing = 2
+support_material_interface_spacing = 0.2
+support_material_contact_distance = 0.20
+support_material_speed = 80
+support_material_interface_speed = 40
+support_tree_angle = 40
+support_tree_angle_slow = 30
+support_tree_branch_diameter = 2
+support_tree_branch_diameter_angle = 5
+support_tree_branch_diameter_double_wall = 3
+support_tree_branch_distance = 1
+support_tree_tip_diameter = 1.2
+support_tree_top_rate = 30%
+
+[print:*0.8n Support*]
+first_layer_extrusion_width = 0.87
+support_material_extrusion_width = 0.76
+support_material_spacing = 4
+support_material_interface_spacing = 0.4
+support_material_contact_distance = 0.3
+support_material_speed = 60
+support_material_interface_speed = 30
+support_tree_angle = 40
+support_tree_angle_slow = 30
+support_tree_branch_diameter = 4
+support_tree_branch_diameter_angle = 5
+support_tree_branch_diameter_double_wall = 6
+support_tree_branch_distance = 1
+support_tree_tip_diameter = 2.4
+support_tree_top_rate = 30%
+
+[print:*1.0n Support*]
+first_layer_extrusion_width = 1.09
+support_material_extrusion_width = 0.95
+support_material_spacing = 5
+support_material_interface_spacing = 0.5
+support_material_contact_distance = 0.35
+support_material_speed = 60
+support_material_interface_speed = 30
+support_tree_angle = 40
+support_tree_angle_slow = 30
+support_tree_branch_diameter = 5
+support_tree_branch_diameter_angle = 5
+support_tree_branch_diameter_double_wall = 7.5
+support_tree_branch_distance = 1
+support_tree_tip_diameter = 3.0
+support_tree_top_rate = 30%
+
+####################### Support presets ######################
+[print:*Soluble*]
+support_material_contact_distance = 0
+support_material_interface_layers = 5
+support_material_bottom_interface_layers = -1
+support_material_interface_spacing = 0
+support_material_style = snug
+support_material = 1
+notes = SOLUBLE_SUPPORT
+
+[print:*Soluble Interface*]
+inherits = *Soluble*
+support_material_pattern = rectilinear-grid
+support_material_extruder = 1
+support_material_interface_extruder = 2
+
+[print:*Soluble Support*]
+inherits = *Soluble*
+support_material_pattern = honeycomb
+support_material_extruder = 2
+support_material_interface_extruder = 2
+support_material_with_sheath = 1
+
+#################### Layer height presets ####################
+[print:*100 Micron*]
+inherits = *common*
+first_layer_height = 0.10
+layer_height = 0.10
+
+[print:*150 Micron*]
+inherits = *common*
+first_layer_height = 0.15
+layer_height = 0.15
+
+[print:*200 Micron*]
+inherits = *common*
+first_layer_height = 0.20
+layer_height = 0.20
+
+[print:*250 Micron*]
+inherits = *common*
+first_layer_height = 0.25
+layer_height = 0.25
+
+[print:*300 Micron*]
+inherits = *common*
+first_layer_height = 0.30
+layer_height = 0.30
+
+[print:*350 Micron*]
+inherits = *common*
+first_layer_height = 0.35
+layer_height = 0.35
+
+[print:*400 Micron*]
+inherits = *common*
+first_layer_height = 0.40
+layer_height = 0.40
+
+[print:*500 Micron*]
+inherits = *common*
+first_layer_height = 0.50
+layer_height = 0.50
+
+[print:*600 Micron*]
+inherits = *common*
+first_layer_height = 0.60
+layer_height = 0.60
+
+[print:*700 Micron*]
+inherits = *common*
+first_layer_height = 0.70
+layer_height = 0.70
+
+##################### 0.6mm Dual Presets #####################
+[print:*0.6 dual*]
+inherits = *dual*; *0.6n*; *0.6n Support*
+compatible_printers_condition = printer_model=="HSP1-I" and printer_notes!~/.*DUPLICATOR_MODE.*/ and nozzle_diameter[0]==0.6 and nozzle_diameter[1]==0.6
+
+[print:*0.6 dual soluble*]
+inherits = *0.6 dual*
+support_material_extrusion_width = 0.60
+
+[print:200 Micron Detail @HSP1]
+inherits = *200 Micron*; *0.6 dual*
+
+[print:300 Micron Standard @HSP1]
+inherits = *300 Micron*; *0.6 dual*
+
+[print:400 Micron Fast @HSP1]
+inherits = *400 Micron*; *0.6 dual*
+perimeter_extrusion_width = 0.68
+external_perimeter_extrusion_width = 0.68
+infill_extrusion_width = 0.68
+solid_infill_extrusion_width = 0.68
+
+[print:200 Micron Soluble Interface Detail @HSP1]
+inherits = *200 Micron*; *0.6 dual soluble*; *Soluble Interface*
+
+[print:300 Micron Soluble Interface Standard @HSP1]
+inherits = *300 Micron*; *0.6 dual soluble*; *Soluble Interface*
+
+[print:400 Micron Soluble Interface Fast @HSP1]
+inherits = *400 Micron*; *0.6 dual soluble*; *Soluble Interface*
+perimeter_extrusion_width = 0.68
+external_perimeter_extrusion_width = 0.68
+infill_extrusion_width = 0.68
+solid_infill_extrusion_width = 0.68
+
+[print:200 Micron Soluble Support Detail @HSP1]
+inherits = *200 Micron*; *0.6 dual soluble*; *Soluble Support*
+
+[print:300 Micron Soluble Support Standard @HSP1]
+inherits = *300 Micron*; *0.6 dual soluble*; *Soluble Support*
+
+[print:400 Micron Soluble Support Fast @HSP1]
+inherits = *400 Micron*; *0.6 dual soluble*; *Soluble Support*
+perimeter_extrusion_width = 0.68
+external_perimeter_extrusion_width = 0.68
+infill_extrusion_width = 0.68
+solid_infill_extrusion_width = 0.68
+
+##################### 0.4mm Dual Presets #####################
+[print:*0.4 dual*]
+inherits = *dual*; *0.4n*; *0.4n Support*
+compatible_printers_condition = printer_model=="HSP1-I" and printer_notes!~/.*DUPLICATOR_MODE.*/ and nozzle_diameter[0]==0.4 and nozzle_diameter[1]==0.4
+
+[print:*0.4 dual soluble*]
+inherits = *0.4 dual*
+support_material_extrusion_width = 0.40
+
+[print:100 Micron Detail @HSP1]
+inherits = *100 Micron*; *0.4 dual*
+
+[print:200 Micron Standard @HSP1]
+inherits = *200 Micron*; *0.4 dual*
+
+[print:300 Micron Fast @HSP1]
+inherits = *300 Micron*; *0.4 dual*
+perimeter_extrusion_width = 0.47
+external_perimeter_extrusion_width = 0.47
+infill_extrusion_width = 0.47
+solid_infill_extrusion_width = 0.47
+
+[print:100 Micron Soluble Interface Detail @HSP1]
+inherits = *100 Micron*; *0.4 dual soluble*; *Soluble Interface*
+
+[print:200 Micron Soluble Interface Standard @HSP1]
+inherits = *200 Micron*; *0.4 dual soluble*; *Soluble Interface*
+
+[print:300 Micron Soluble Interface Fast @HSP1]
+inherits = *300 Micron*; *0.4 dual soluble*; *Soluble Interface*
+perimeter_extrusion_width = 0.47
+external_perimeter_extrusion_width = 0.47
+infill_extrusion_width = 0.47
+solid_infill_extrusion_width = 0.47
+
+[print:100 Micron Soluble Support Detail @HSP1]
+inherits = *100 Micron*; *0.4 dual soluble*; *Soluble Support*
+
+[print:200 Micron Soluble Support Standard @HSP1]
+inherits = *200 Micron*; *0.4 dual soluble*; *Soluble Support*
+
+[print:300 Micron Soluble Support Fast @HSP1]
+inherits = *300 Micron*; *0.4 dual soluble*; *Soluble Support*
+perimeter_extrusion_width = 0.47
+external_perimeter_extrusion_width = 0.47
+infill_extrusion_width = 0.47
+solid_infill_extrusion_width = 0.47
+
+##################### 0.8mm Dual Presets #####################
+[print:*0.8 dual*]
+inherits = *dual*; *0.8n*; *0.8n Support*
+compatible_printers_condition = printer_model=="HSP1-I" and printer_notes!~/.*DUPLICATOR_MODE.*/ and nozzle_diameter[0]==0.8 and nozzle_diameter[1]==0.8
+
+[print:*0.8 dual soluble*]
+inherits = *0.8 dual*
+support_material_extrusion_width = 0.80
+
+[print:300 Micron Detail @HSP1]
+inherits = *300 Micron*; *0.8 dual*
+
+[print:400 Micron Standard @HSP1]
+inherits = *400 Micron*; *0.8 dual*
+
+[print:600 Micron Fast @HSP1]
+inherits = *600 Micron*; *0.8 dual*
+perimeter_extrusion_width = 0.90
+external_perimeter_extrusion_width = 0.90
+infill_extrusion_width = 0.90
+solid_infill_extrusion_width = 0.90
+
+[print:300 Micron Soluble Interface Detail @HSP1]
+inherits = *300 Micron*; *0.8 dual soluble*; *Soluble Interface*
+
+[print:400 Micron Soluble Interface Standard @HSP1]
+inherits = *400 Micron*; *0.8 dual soluble*; *Soluble Interface*
+
+[print:600 Micron Soluble Interface Fast @HSP1]
+inherits = *600 Micron*; *0.8 dual soluble*; *Soluble Interface*
+perimeter_extrusion_width = 0.90
+external_perimeter_extrusion_width = 0.90
+infill_extrusion_width = 0.90
+solid_infill_extrusion_width = 0.90
+
+[print:300 Micron Soluble Support Detail @HSP1]
+inherits = *300 Micron*; *0.8 dual soluble*; *Soluble Support*
+
+[print:400 Micron Soluble Support Standard @HSP1]
+inherits = *400 Micron*; *0.8 dual soluble*; *Soluble Support*
+
+[print:600 Micron Soluble Support Fast @HSP1]
+inherits = *600 Micron*; *0.8 dual soluble*; *Soluble Support*
+perimeter_extrusion_width = 0.90
+external_perimeter_extrusion_width = 0.90
+infill_extrusion_width = 0.90
+solid_infill_extrusion_width = 0.90
+
+##################### 1.0mm Dual Presets #####################
+[print:*1.0 dual*]
+inherits = *dual*; *1.0n*; *1.0n Support*
+compatible_printers_condition = printer_model=="HSP1-I" and printer_notes!~/.*DUPLICATOR_MODE.*/ and nozzle_diameter[0]==1.0 and nozzle_diameter[1]==1.0
+
+[print:*1.0 dual soluble*]
+inherits = *1.0 dual*
+support_material_extrusion_width = 1.00
+
+[print:350 Micron Detail @HSP1]
+inherits = *350 Micron*; *1.0 dual*
+
+[print:500 Micron Standard @HSP1]
+inherits = *500 Micron*; *1.0 dual*
+
+[print:700 Micron Fast @HSP1]
+inherits = *700 Micron*; *1.0 dual*
+perimeter_extrusion_width = 1.12
+external_perimeter_extrusion_width = 1.12
+infill_extrusion_width = 1.12
+solid_infill_extrusion_width = 1.12
+
+[print:350 Micron Soluble Interface Detail @HSP1]
+inherits = *350 Micron*; *1.0 dual soluble*; *Soluble Interface*
+
+[print:500 Micron Soluble Interface Standard @HSP1]
+inherits = *500 Micron*; *1.0 dual soluble*; *Soluble Interface*
+
+[print:700 Micron Soluble Interface Fast @HSP1]
+inherits = *700 Micron*; *1.0 dual soluble*; *Soluble Interface*
+perimeter_extrusion_width = 1.12
+external_perimeter_extrusion_width = 1.12
+infill_extrusion_width = 1.12
+solid_infill_extrusion_width = 1.12
+
+[print:350 Micron Soluble Support Detail @HSP1]
+inherits = *350 Micron*; *1.0 dual soluble*; *Soluble Support*
+
+[print:500 Micron Soluble Support Standard @HSP1]
+inherits = *500 Micron*; *1.0 dual soluble*; *Soluble Support*
+
+[print:700 Micron Soluble Support Fast @HSP1]
+inherits = *700 Micron*; *1.0 dual soluble*; *Soluble Support*
+perimeter_extrusion_width = 1.12
+external_perimeter_extrusion_width = 1.12
+infill_extrusion_width = 1.12
+solid_infill_extrusion_width = 1.12
+
+################## 0.6mm Duplicator Presets ##################
+[print:*0.6 duplicator*]
+inherits = *duplicator*; *0.6n*; *0.6n Support*
+compatible_printers_condition = printer_model=="HSP1-I Duplicator Mode" and printer_notes=~/.*DUPLICATOR_MODE.*/ and nozzle_diameter[0]==0.6
+
+[print:200 Micron Detail Duplicator @HSP1]
+inherits = *200 Micron*; *0.6 duplicator*
+
+[print:300 Micron Standard Duplicator @HSP1]
+inherits = *300 Micron*; *0.6 duplicator*
+
+[print:400 Micron Fast Duplicator @HSP1]
+inherits = *400 Micron*; *0.6 duplicator*
+perimeter_extrusion_width = 0.68
+external_perimeter_extrusion_width = 0.68
+infill_extrusion_width = 0.68
+solid_infill_extrusion_width = 0.68
+
+##################### 0.4mm Duplicator Presets #####################
+[print:*0.4 duplicator*]
+inherits = *duplicator*; *0.4n*; *0.4n Support*
+compatible_printers_condition = printer_model=="HSP1-I Duplicator Mode" and printer_notes=~/.*DUPLICATOR_MODE.*/ and nozzle_diameter[0]==0.4
+
+[print:100 Micron Detail Duplicator @HSP1]
+inherits = *100 Micron*; *0.4 duplicator*
+
+[print:200 Micron Standard Duplicator @HSP1]
+inherits = *200 Micron*; *0.4 duplicator*
+
+[print:300 Micron Fast Duplicator @HSP1]
+inherits = *300 Micron*; *0.4 duplicator*
+perimeter_extrusion_width = 0.47
+external_perimeter_extrusion_width = 0.47
+infill_extrusion_width = 0.47
+solid_infill_extrusion_width = 0.47
+
+################## 0.8mm Duplicator Presets ##################
+[print:*0.8 duplicator*]
+inherits = *duplicator*; *0.8n*; *0.8n Support*
+compatible_printers_condition = printer_model=="HSP1-I Duplicator Mode" and printer_notes=~/.*DUPLICATOR_MODE.*/ and nozzle_diameter[0]==0.8
+
+[print:300 Micron Detail Duplicator @HSP1]
+inherits = *300 Micron*; *0.8 duplicator*
+
+[print:400 Micron Standard Duplicator @HSP1]
+inherits = *400 Micron*; *0.8 duplicator*
+
+[print:600 Micron Fast Duplicator @HSP1]
+inherits = *600 Micron*; *0.8 duplicator*
+perimeter_extrusion_width = 0.90
+external_perimeter_extrusion_width = 0.90
+infill_extrusion_width = 0.90
+solid_infill_extrusion_width = 0.90
+
+################## 1.0mm Duplicator Presets ##################
+[print:*1.0 duplicator*]
+inherits = *duplicator*; *1.0n*; *1.0n Support*
+compatible_printers_condition = printer_model=="HSP1-I Duplicator Mode" and printer_notes=~/.*DUPLICATOR_MODE.*/ and nozzle_diameter[0]==1.0
+
+[print:350 Micron Detail Duplicator @HSP1]
+inherits = *350 Micron*; *1.0 duplicator*
+
+[print:500 Micron Standard Duplicator @HSP1]
+inherits = *500 Micron*; *1.0 duplicator*
+
+[print:700 Micron Fast Duplicator @HSP1]
+inherits = *700 Micron*; *1.0 duplicator*
+perimeter_extrusion_width = 1.12
+external_perimeter_extrusion_width = 1.12
+infill_extrusion_width = 1.12
+solid_infill_extrusion_width = 1.12
+
+################### Common filament preset ###################
+[filament:*common*]
+cooling = 0
+compatible_printers =
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_notes = ""
+filament_settings_id = ""
+filament_soluble = 0
+min_print_speed = 15
+slowdown_below_layer_time = 10
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_HSP.*/
+
+################### Materials base presets ###################
+[filament:*PLA*]
+inherits = *common*
+filament_type = PLA
+temperature = 205
+bed_temperature = 60
+first_layer_temperature = 195
+first_layer_bed_temperature = 60
+idle_temperature = 140
+filament_max_volumetric_speed = 20
+extrusion_multiplier = 0.94
+filament_density = 1.24
+filament_cost = 20
+filament_colour = #FF3232
+fan_always_on = 1
+cooling = 1
+min_fan_speed = 15
+max_fan_speed = 40
+bridge_fan_speed = 40
+disable_fan_first_layers = 1
+fan_below_layer_time = 60
+
+[filament:*PETG*]
+inherits = *common*
+filament_type = PETG
+temperature = 245
+bed_temperature = 80
+first_layer_temperature = 240
+first_layer_bed_temperature = 80
+idle_temperature = 160
+filament_max_volumetric_speed = 15
+extrusion_multiplier = 0.94
+filament_density = 1.27
+filament_cost = 30
+filament_colour = #FF8000
+fan_always_on = 1
+cooling = 1
+min_fan_speed = 0
+max_fan_speed = 30
+bridge_fan_speed = 30
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+
+[filament:*PCTG*]
+inherits = *common*
+filament_type = PCTG
+temperature = 245
+bed_temperature = 80
+first_layer_temperature = 240
+first_layer_bed_temperature = 80
+idle_temperature = 160
+filament_max_volumetric_speed = 15
+extrusion_multiplier = 0.94
+filament_density = 1.21
+filament_cost = 40
+filament_colour = #FF8000
+fan_always_on = 1
+cooling = 1
+min_fan_speed = 0
+max_fan_speed = 30
+bridge_fan_speed = 30
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+
+[filament:*ABS*]
+inherits = *common*
+filament_type = ABS
+temperature = 250
+bed_temperature = 100
+first_layer_temperature = 240
+first_layer_bed_temperature = 100
+idle_temperature = 170
+filament_max_volumetric_speed = 20
+extrusion_multiplier = 0.92
+filament_density = 1.04
+filament_cost = 20
+filament_colour = #3A80CA
+fan_always_on = 0
+cooling = 0
+min_fan_speed = 0
+max_fan_speed = 0
+bridge_fan_speed = 30
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+
+[filament:*ASA*]
+inherits = *common*
+filament_type = ASA
+temperature = 250
+bed_temperature = 100
+first_layer_temperature = 245
+first_layer_bed_temperature = 100
+idle_temperature = 170
+filament_max_volumetric_speed = 15
+extrusion_multiplier = 0.92
+filament_density = 1.06
+filament_cost = 40
+filament_colour = #3A08AC
+fan_always_on = 0
+cooling = 0
+min_fan_speed = 0
+max_fan_speed = 0
+bridge_fan_speed = 30
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+
+[filament:*Nylon*]
+inherits = *common*
+filament_type = NYLON
+temperature = 255
+bed_temperature = 70
+first_layer_temperature = 250
+first_layer_bed_temperature = 70
+idle_temperature = 170
+filament_max_volumetric_speed = 15
+extrusion_multiplier = 0.94
+filament_density = 1.06
+filament_cost = 40
+filament_colour = #3A08AC
+fan_always_on = 0
+cooling = 0
+min_fan_speed = 0
+max_fan_speed = 0
+bridge_fan_speed = 30
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+
+[filament:*PC*]
+inherits = *common*
+filament_type = PC
+temperature = 270
+bed_temperature = 100
+first_layer_temperature = 265
+first_layer_bed_temperature = 100
+idle_temperature = 180
+filament_max_volumetric_speed = 15
+extrusion_multiplier = 0.94
+filament_density = 1.19
+filament_cost = 50
+filament_colour = #3A08AC
+fan_always_on = 0
+cooling = 0
+min_fan_speed = 0
+max_fan_speed = 0
+bridge_fan_speed = 30
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+
+[filament:*BVOH*]
+inherits = *common*
+filament_type = BVOH
+temperature = 220
+bed_temperature = 60
+first_layer_temperature = 215
+first_layer_bed_temperature = 0
+idle_temperature = 120
+filament_max_volumetric_speed = 15
+extrusion_multiplier = 0.90
+filament_density = 1.14
+filament_cost = 100
+filament_colour = #FF3232
+fan_always_on = 1
+cooling = 1
+min_fan_speed = 0
+max_fan_speed = 30
+bridge_fan_speed = 30
+disable_fan_first_layers = 4
+fan_below_layer_time = 30
+filament_soluble = 1
+compatible_prints_condition = notes=~/.*SOLUBLE_SUPPORT.*/
+
+[filament:*PVA*]
+inherits = *common*
+filament_type = PVA
+temperature = 220
+bed_temperature = 60
+first_layer_temperature = 215
+first_layer_bed_temperature = 0
+idle_temperature = 120
+filament_max_volumetric_speed = 15
+extrusion_multiplier = 0.90
+filament_density = 1.24
+filament_cost = 80
+filament_colour = #FF3232
+fan_always_on = 1
+cooling = 1
+min_fan_speed = 0
+max_fan_speed = 30
+bridge_fan_speed = 30
+disable_fan_first_layers = 4
+fan_below_layer_time = 30
+filament_soluble = 1
+compatible_prints_condition = notes=~/.*SOLUBLE_SUPPORT.*/
+
+################## Generic material presets ##################
+[filament:*Generic*]
+filament_vendor = Generic
+
+[filament:Generic PLA @HSP1]
+inherits = *PLA*; *Generic*
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.026}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+[filament:Generic PETG @HSP1]
+inherits = *PETG*; *Generic*
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+[filament:Generic ABS @HSP1]
+inherits = *ABS*; *Generic*
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+[filament:Generic ASA @HSP1]
+inherits = *ASA*; *Generic*
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+[filament:Generic PC @HSP1]
+inherits = *PC*; *Generic*
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+##################### Layer Line presets #####################
+[filament:*Layer Line*]
+filament_vendor = HartSmart Products
+filament_spool_weight = 200
+
+[filament:Layer Line Engineering PLA @HSP1]
+inherits = *PLA*; *Layer Line*
+temperature = 215
+bed_temperature = 60
+first_layer_temperature = 210
+first_layer_bed_temperature = 60
+filament_cost = 34.99
+filament_density = 1.22
+filament_max_volumetric_speed = 20
+fan_always_on = 1
+cooling = 1
+min_fan_speed = 15
+max_fan_speed = 40
+bridge_fan_speed = 40
+disable_fan_first_layers = 1
+fan_below_layer_time = 60
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.024}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+[filament:Layer Line Just PLAying @HSP1]
+inherits = *PLA*; *Layer Line*
+temperature = 200
+bed_temperature = 60
+first_layer_temperature = 195
+first_layer_bed_temperature = 60
+filament_cost = 22.99
+filament_density = 1.22
+filament_max_volumetric_speed = 20
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.026}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+#################### Push Plastic presets ####################
+[filament:*Push Plastic*]
+filament_vendor = Push Plastic
+filament_spool_weight = 320 # 750g spools weight 350g
+
+[filament:Push Plastic PLA @HSP1]
+inherits = *PLA*; *Push Plastic*
+temperature = 200
+bed_temperature = 60
+first_layer_temperature = 195
+first_layer_bed_temperature = 60
+filament_cost = 29.99
+filament_density = 1.24
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.026}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+[filament:Push Plastic PETG @HSP1]
+inherits = *PETG*; *Push Plastic*
+temperature = 245
+bed_temperature = 80
+first_layer_temperature = 240
+first_layer_bed_temperature = 80
+filament_cost = 32.99
+filament_density = 1.27
+extrusion_multiplier = 0.94
+filament_max_volumetric_speed = 15
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.014}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+[filament:Push Plastic PCTG @HSP1]
+inherits = *PCTG*; *Push Plastic*
+temperature = 245
+bed_temperature = 80
+first_layer_temperature = 240
+first_layer_bed_temperature = 80
+filament_cost = 39.99
+filament_density = 1.21
+extrusion_multiplier = 1.00
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.018}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+[filament:Push Plastic ABS @HSP1]
+inherits = *ABS*; *Push Plastic*
+temperature = 250
+bed_temperature = 100
+first_layer_temperature = 240
+first_layer_bed_temperature = 100
+filament_cost = 29.99
+filament_density = 1.03
+filament_max_volumetric_speed = 20
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.012}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.024}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+#################### Polymaker presets ####################
+[filament:*Polymaker*]
+filament_vendor = Polymaker
+filament_spool_weight = 140
+
+[filament:Polymaker PolyLite PLA-CF @HSP1]
+inherits = *PLA*; *Polymaker*
+temperature = 205
+bed_temperature = 60
+first_layer_temperature = 200
+first_layer_bed_temperature = 60
+filament_cost = 29.99
+filament_density = 1.29
+filament_max_volumetric_speed = 20
+extrusion_multiplier = 0.93
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.012}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+[filament:Polymaker PolyMide PA6-CF @HSP1]
+inherits = *Nylon*; *Polymaker*
+temperature = 290
+bed_temperature = 50
+first_layer_temperature = 285
+first_layer_bed_temperature = 50
+filament_cost = 74.99
+filament_density = 1.17
+filament_max_volumetric_speed = 15
+extrusion_multiplier = 0.93
+enable_dynamic_fan_speeds = 1
+overhang_fan_speed_0 = 30
+overhang_fan_speed_1 = 25
+overhang_fan_speed_2 = 15
+overhang_fan_speed_3 = 10
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.016}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+[filament:Polymaker PolyDissolve S1 @HSP1]
+inherits = *PVA*; *Polymaker*
+# alias = Polymaker PolyDissolve S1
+temperature = 220
+bed_temperature = 40
+first_layer_temperature = 215
+filament_cost = 79.99
+filament_density = 1.13
+filament_max_volumetric_speed = 20
+extrusion_multiplier = 0.90
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.018}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\nM98 P{\"{directories.system^\\\"/System Macros/Change Settings/adjust_filament_monitor_sensitivity.g\\\"}\"} D{current_extruder} L60 H140\n{endif}"
+
+#################### Taulman presets ####################
+[filament:*Taulman*]
+filament_vendor = Taulman
+filament_spool_weight = 325
+
+[filament:Taulman Alloy 910 @HSP1]
+inherits = *Nylon*; *Taulman*
+temperature = 255
+bed_temperature = 70
+first_layer_temperature = 245
+first_layer_bed_temperature = 70
+filament_cost = 80.00
+filament_density = 1.11
+filament_max_volumetric_speed = 15
+extrusion_multiplier = 0.93
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.006}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+#################### Essentium presets ####################
+[filament:*Essentium*]
+filament_vendor = Essentium
+filament_spool_weight = 325
+
+[filament:Essentium HTN-CF25 @HSP1]
+inherits = *Nylon*; *Essentium*
+temperature = 280
+bed_temperature = 80
+first_layer_temperature = 275
+first_layer_bed_temperature = 80
+filament_cost = 230.00
+filament_density = 1.32
+filament_max_volumetric_speed = 15
+extrusion_multiplier = 0.95
+enable_dynamic_fan_speeds = 1
+overhang_fan_speed_0 = 30
+overhang_fan_speed_1 = 25
+overhang_fan_speed_2 = 15
+overhang_fan_speed_3 = 10
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.006}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+[filament:Essentium Support S10 @HSP1]
+inherits = *PVA*; *Essentium*
+temperature = 215
+bed_temperature = 60
+first_layer_temperature = 210
+filament_cost = 100.00
+filament_density = 1.14
+filament_max_volumetric_speed = 20
+extrusion_multiplier = 0.90
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.04}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+#################### BASF presets ####################
+[filament:*BASF*]
+filament_vendor = BASF
+filament_spool_weight = 215
+
+[filament:BASF Ultrafuse ABS Fusion+ @HSP1]
+inherits = *ABS*; *BASF*
+temperature = 245
+bed_temperature = 100
+first_layer_temperature = 255
+first_layer_bed_temperature = 100
+filament_cost = 45.00
+filament_density = 1.07
+filament_max_volumetric_speed = 15
+extrusion_multiplier = 0.95
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+[filament:BASF Ultrafuse BVOH @HSP1]
+inherits = *BVOH*; *BASF*
+temperature = 215
+bed_temperature = 60
+first_layer_temperature = 210
+filament_cost = 143.00
+filament_density = 1.14
+filament_max_volumetric_speed = 20
+extrusion_multiplier = 0.91
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+#################### Coex presets ####################
+[filament:*Coex*]
+filament_vendor = Coex
+filament_spool_weight = 350
+
+################### Common printer presets ###################
+[printer:*common*]
+printer_technology = FFF
+autoemit_temperature_commands = 0
+color_change_gcode = M600
+gcode_flavor = reprapfirmware
+high_current_on_filament_swap = 0
+machine_limits_usage = time_estimate_only
+machine_max_acceleration_e = 2400
+machine_max_acceleration_extruding = 5000
+machine_max_acceleration_retracting = 5000
+machine_max_acceleration_travel = 5000
+machine_max_acceleration_x = 5000
+machine_max_acceleration_y = 5000
+machine_max_acceleration_z = 300
+machine_max_feedrate_e = 100
+machine_max_feedrate_x = 500
+machine_max_feedrate_y = 500
+machine_max_feedrate_z = 10
+machine_max_jerk_e = 15
+machine_max_jerk_x = 4
+machine_max_jerk_y = 4
+machine_max_jerk_z = 2.5
+max_print_height = 1000
+parking_pos_retraction = 92
+pause_print_gcode = M226
+remaining_times = 1
+silent_mode = 0
+single_extruder_multi_material = 0
+thumbnails = 256x256/QOI
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+z_offset = 0
+default_filament_profile = Layer Line Engineering PLA @HSP1
+end_gcode = ; Stop the print\nM0\n\n;NUM_LAYERS:[total_layer_count]\n
+before_layer_gcode = ;LAYER:[layer_num]
+
+# dual preset
+[printer:*dual*]
+inherits = *common*
+printer_model = HSP1-I
+autoemit_temperature_commands = 0
+bed_shape = 0x0,650x0,650x640,0x640
+extruder_colour = #FFFF00;#FF00FF
+extruder_offset = 0x0,0x0
+wipe = 1,1
+retract_before_wipe = 50%,50%
+retract_layer_change = 1,1
+retract_length_toolchange = 2,2
+retract_lift = 0.4,0.4
+retract_lift_above = 0,0
+retract_lift_below = 0,0
+retract_restart_extra = 0,0
+retract_restart_extra_toolchange = 0,0
+retract_speed = 40,40
+deretract_speed = 30,30
+toolchange_gcode = T{next_extruder}\nM116 P{next_extruder} S5
+layer_gcode = {if layer_num == 1}M140 S{max((is_extruder_used[0]? bed_temperature[0]:0),(is_extruder_used[1]? bed_temperature[1]:0))}{endif}
+printer_notes = ;Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_HSP\nPRINTER_MODEL_HSP1-I\n
+start_gcode = ; Run nozzle diameter and filament check\nM98 P{"{directories.system^\\"/System Macros/Config Checks/nozzle_check.g\\"}"} {if is_extruder_used[0]}L{nozzle_diameter[0]}{endif} {if is_extruder_used[1]}S{nozzle_diameter[1]}{endif}\nM98 P{"{directories.system^\\"/System Macros/Config Checks/filament_check.g\\"}"} {if is_extruder_used[0]}L"{filament_type[0]}"{endif} {if is_extruder_used[1]}S"{filament_type[1]}"{endif}\n\n; set extruder temp\n{if is_extruder_used[0]}M568 P0 S{first_layer_temperature[0]} R{(!is_nil(idle_temperature[0])? idle_temperature[0]:first_layer_temperature[0]-60)} A1{endif}\n{if is_extruder_used[1]}M568 P1 S{first_layer_temperature[1]} R{(!is_nil(idle_temperature[1])? idle_temperature[1]:first_layer_temperature[1]-60)} A1{endif}\n\n; Set and wait for bed temp\nM190 S{max((is_extruder_used[0]? first_layer_bed_temperature[0]:0),(is_extruder_used[1]? first_layer_bed_temperature[1]:0))}\n\n; Home all axes\nG28\n\n; Enable mesh compensation\nM98 P{"{directories.system^\\"/System Macros/Config Checks/load_heightmap.g\\"}"}\n\n; Move to starting position\nG0 H2 X{"{move.axes[0].min}"} Y50 F6000\n\n; Select first tool\nT{initial_extruder}\n\n; Move near start\nG1 X[first_layer_print_min_0] Y[first_layer_print_min_1] Z{first_layer_height + 2.0} F12000\n
+
+# duplicator preset
+[printer:*duplicator*]
+inherits = *common*
+printer_model = HSP1-I Duplicator Mode
+autoemit_temperature_commands = 0
+bed_shape = 0x0,320x0,320x640,0x640
+extruder_colour = #FFFF00
+extruder_offset = 0x0
+wipe = 1
+retract_before_wipe = 50%
+retract_layer_change = 1
+retract_length_toolchange = 0
+retract_lift = 0.4
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 40
+deretract_speed = 30
+printer_notes = ;Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_HSP\nPRINTER_MODEL_HSP1-I\nDUPLICATOR_MODE\n
+start_gcode = ; Run nozzle diameter and filament check\nM98 P{"{directories.system^\\"/System Macros/Config Checks/nozzle_check.g\\"}"} L{nozzle_diameter[0]} S{nozzle_diameter[0]}\nM98 P{"{directories.system^\\"/System Macros/Config Checks/filament_check.g\\"}"} L"{filament_type[0]}" S"{filament_type[0]}"\n\n; set extruder temp\nM568 P2 S{first_layer_temperature[0]} R{(!is_nil(idle_temperature[0])? idle_temperature[0]:first_layer_temperature[0]-60)} A1\n\n; Set and wait for bed temp\nM190 S{first_layer_bed_temperature[0]}\n\n; Home all axes\nG28\n\n; Enable mesh compensation\nG29 S1\n\n; Move to starting position\nG0 H2 X{"{move.axes[0].min}"} Y50 F6000\n\n; Select duplicator "tool"\nT2\n\n; Move near start\nG1 X[first_layer_print_min_0] Y[first_layer_print_min_1] Z{first_layer_height + 2.0} F12000\n
+
+# mirror preset
+[printer:*mirror*]
+inherits = *common*
+printer_model = HSP1-I Duplicator Mode
+autoemit_temperature_commands = 0
+bed_shape = 0x0,300x0,300x640,0x640
+extruder_colour = #FFFF00
+extruder_offset = 0x0
+wipe = 1
+retract_before_wipe = 50%
+retract_layer_change = 1
+retract_length_toolchange = 0
+retract_lift = 0.4
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 40
+deretract_speed = 30
+printer_notes = ;Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_HSP\nPRINTER_MODEL_HSP1-I\nDUPLICATOR_MODE\n
+start_gcode = ; Run nozzle diameter and filament check\nM98 P{"{directories.system^\\"/System Macros/Config Checks/nozzle_check.g\\"}"} L{nozzle_diameter[0]} S{nozzle_diameter[0]}\nM98 P{"{directories.system^\\"/System Macros/Config Checks/filament_check.g\\"}"} L"{filament_type[0]}" S"{filament_type[0]}"\n\n; set extruder temp\nM568 P3 S{first_layer_temperature[0]} R{(!is_nil(idle_temperature[0])? idle_temperature[0]:first_layer_temperature[0]-60)} A1\n\n; Set and wait for bed temp\nM190 S{first_layer_bed_temperature[0]}\n\n; Home all axes\nG28\n\n; Enable mesh compensation\nG29 S1\n\n; Move to starting position\nG0 H2 X{"{move.axes[0].min}"} Y50 F6000\n\n; Select mirror "tool"\nT3\n\n; Move near start\nG1 X[first_layer_print_min_0] Y[first_layer_print_min_1] Z{first_layer_height + 2.0} F12000\n
+
+#################### Nozzle size presets ####################
+[printer:*0.6*]
+min_layer_height = 0.1
+max_layer_height = 0.5
+retract_before_travel = 1.5
+printer_variant = 0.6
+
+[printer:*0.4*]
+min_layer_height = 0.05
+max_layer_height = 0.3
+retract_before_travel = 1
+printer_variant = 0.4
+
+[printer:*0.8*]
+min_layer_height = 0.2
+max_layer_height = 0.6
+retract_before_travel = 2
+printer_variant = 0.8
+
+[printer:*1.0*]
+min_layer_height = 0.3
+max_layer_height = 0.8
+retract_before_travel = 2.5
+printer_variant = 1.0
+
+
+#################### Dual printer presets ####################
+[printer:HSP1-I - 2x0.6mm Takoto]
+inherits = *dual*; *0.6*
+
+nozzle_diameter = 0.6,0.6
+retract_length = 2,2
+default_print_profile = 300 Micron Standard @HSP1
+
+[printer:HSP1-I - 2x0.4mm Takoto]
+inherits = *dual*; *0.4*
+nozzle_diameter = 0.4,0.4
+retract_length = 2,2
+default_print_profile = 200 Micron Standard @HSP1
+
+[printer:HSP1-I - 2x0.8mm Takoto]
+inherits = *dual*; *0.8*
+nozzle_diameter = 0.8,0.8
+retract_length = 2,2
+default_print_profile = 400 Micron Standard @HSP1
+
+[printer:HSP1-I - 2x1.0mm Takoto]
+inherits = *dual*; *1.0*
+nozzle_diameter = 1.0,1.0
+retract_length = 2,2
+default_print_profile = 500 Micron Standard @HSP1
+
+
+################# Duplicator printer presets #################
+[printer:HSP1-I - 0.6mm Takoto Duplicator]
+inherits = *duplicator*; *0.6*
+nozzle_diameter = 0.6
+retract_length = 2
+default_print_profile = 300 Micron Standard Duplicator @HSP1
+
+[printer:HSP1-I - 0.4mm Takoto Duplicator]
+inherits = *duplicator*; *0.4*
+nozzle_diameter = 0.4
+retract_length = 2
+default_print_profile = 200 Micron Standard Duplicator @HSP1
+
+[printer:HSP1-I - 0.8mm Takoto Duplicator]
+inherits = *duplicator*; *0.8*
+nozzle_diameter = 0.8
+retract_length = 2
+default_print_profile = 400 Micron Standard Duplicator @HSP1
+
+[printer:HSP1-I - 1.0mm Takoto Duplicator]
+inherits = *duplicator*; *1.0*
+nozzle_diameter = 1.0
+retract_length = 2
+default_print_profile = 500 Micron Standard Duplicator @HSP1
+
+################# Mirror printer presets #################
+[printer:HSP1-I - 0.6mm Takoto Mirror]
+inherits = *mirror*; *0.6*
+nozzle_diameter = 0.6
+retract_length = 2
+default_print_profile = 300 Micron Standard Duplicator @HSP1
+
+[printer:HSP1-I - 0.4mm Takoto Mirror]
+inherits = *mirror*; *0.4*
+nozzle_diameter = 0.4
+retract_length = 2
+default_print_profile = 200 Micron Standard Duplicator @HSP1
+
+[printer:HSP1-I - 0.8mm Takoto Mirror]
+inherits = *mirror*; *0.8*
+nozzle_diameter = 0.8
+retract_length = 2
+default_print_profile = 400 Micron Standard Duplicator @HSP1
+
+[printer:HSP1-I - 1.0mm Takoto Mirror]
+inherits = *mirror*; *1.0*
+nozzle_diameter = 1.0
+retract_length = 2
+default_print_profile = 500 Micron Standard Duplicator @HSP1
diff --git a/resources/profiles/HartSmartProducts/HSP1-I Duplicator Mode_thumbnail.png b/resources/profiles/HartSmartProducts/HSP1-I Duplicator Mode_thumbnail.png
new file mode 100644
index 00000000000..04a0a0745a2
Binary files /dev/null and b/resources/profiles/HartSmartProducts/HSP1-I Duplicator Mode_thumbnail.png differ
diff --git a/resources/profiles/HartSmartProducts/HSP1-I_thumbnail.png b/resources/profiles/HartSmartProducts/HSP1-I_thumbnail.png
new file mode 100644
index 00000000000..49232176b4c
Binary files /dev/null and b/resources/profiles/HartSmartProducts/HSP1-I_thumbnail.png differ
diff --git a/resources/profiles/HartSmartProducts/hsp1_i.svg b/resources/profiles/HartSmartProducts/hsp1_i.svg
new file mode 100644
index 00000000000..0981abbc265
--- /dev/null
+++ b/resources/profiles/HartSmartProducts/hsp1_i.svg
@@ -0,0 +1,985 @@
+
+
+
+
diff --git a/resources/profiles/HartSmartProducts/hsp1_i_bed.stl b/resources/profiles/HartSmartProducts/hsp1_i_bed.stl
new file mode 100644
index 00000000000..eaec6b78a78
Binary files /dev/null and b/resources/profiles/HartSmartProducts/hsp1_i_bed.stl differ
diff --git a/resources/profiles/HartSmartProducts/hsp1_i_duplicator.svg b/resources/profiles/HartSmartProducts/hsp1_i_duplicator.svg
new file mode 100644
index 00000000000..e71914c4e1c
--- /dev/null
+++ b/resources/profiles/HartSmartProducts/hsp1_i_duplicator.svg
@@ -0,0 +1,988 @@
+
+
+
+
diff --git a/resources/profiles/HartSmartProducts/hsp1_i_duplicator_bed.stl b/resources/profiles/HartSmartProducts/hsp1_i_duplicator_bed.stl
new file mode 100644
index 00000000000..365ac1b9c48
Binary files /dev/null and b/resources/profiles/HartSmartProducts/hsp1_i_duplicator_bed.stl differ
diff --git a/resources/profiles/INAT.ini b/resources/profiles/INAT.ini
index d058fc123dd..05de12e656f 100644
--- a/resources/profiles/INAT.ini
+++ b/resources/profiles/INAT.ini
@@ -11,7 +11,6 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
### PRINTER LIST
###
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/INAT/
[printer_model:PROTON_X_RAIL]
name = INAT Proton X Rail
variants = 0.4
@@ -19,7 +18,6 @@ technology = FFF
family = Proton
default_materials = PLA @PROTON_X
-thumbnail = PROTON_X_RAIL_thumbnail.png
[printer_model:PROTON_X_ROD]
name = INAT Proton X Rod
variants = 0.4
@@ -27,7 +25,6 @@ technology = FFF
family = Proton
default_materials = PLA @PROTON_X
-thumbnail = PROTON_X_ROD_thumbnail.png
[printer_model:PROTON_XE750]
name = INAT Proton XE-750
variants = 0.4
@@ -40,7 +37,6 @@ default_materials = PLA @PROTON_XE750
### COMMON QUALITY DEFINITIONS
###
-thumbnail = PROTON_XE750_thumbnail.png
[print:*common*]
#layers
layer_height = 0.2
@@ -732,4 +728,4 @@ inherits =*common Polymaker PolyMide PA6-GF @INAT*; *start_end_gcode @PROTON_XE7
inherits =*common Devil Design PETG @INAT*; *start_end_gcode @PROTON_XE750*
[filament:Filament PM PETG FRJet @PROTON_XE750]
-inherits =*common Filament PM PETG FRJet @INAT*; *start_end_gcode @PROTON_XE750*
\ No newline at end of file
+inherits =*common Filament PM PETG FRJet @INAT*; *start_end_gcode @PROTON_XE750*
diff --git a/resources/profiles/Infinity3D.ini b/resources/profiles/Infinity3D.ini
index 5be166dfdbf..372ecf64d6a 100644
--- a/resources/profiles/Infinity3D.ini
+++ b/resources/profiles/Infinity3D.ini
@@ -11,7 +11,6 @@ config_version = 2.0.0
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Infinity3D/
# The printer models will be shown by the Configuration Wizard in this order,
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Infinity3D/
[printer_model:DEV-200]
name = Infinity3D DEV-200
variants = 0.4
@@ -20,7 +19,6 @@ bed_model = DEV_200_bed.stl
bed_texture = DEV_200_texture.svg
default_materials = Generic PLA @Infinity3D; Generic PETG @Infinity3D
-thumbnail = DEV-200_thumbnail.png
[printer_model:DEV-350]
name = Infinity3D DEV-350
variants = 0.4
@@ -29,7 +27,6 @@ bed_model = DEV_350_bed.stl
bed_texture = DEV_350_texture.svg
default_materials = Generic PLA @Infinity3D; Generic PETG @Infinity3D
-thumbnail = DEV-350_thumbnail.png
[print:*common*]
avoid_crossing_perimeters = 1
avoid_crossing_perimeters_max_detour = 0
@@ -813,4 +810,4 @@ max_print_height = 235
start_gcode = Start GCode begin\nM140 S[first_layer_bed_temperature] ;Start Warming Bed\nM104 S[first_layer_temperature] ;Preheat\nG28 ;home\nG29 ;Auto Bed-level\nG90 ;absolute positioning\nG1 X-10 Y-10 F3000 ;Move to corner\nM190 S[first_layer_bed_temperature] ;Wait For Bed Temperature\nM109 S[first_layer_temperature] ;Wait for Hotend Temperature\nG92 E0 ;Zero set extruder position\nG1 E3 F200 ;Feed filament to clear nozzle\nG92 E0 ;Zero set extruder position
end_gcode = ;End GCode begin\nM140 S0 ;Heated bed heater off\nM104 S0 ;Extruder heater off\nG90 ;absolute positioning\nG92 E0 ;Retract the filament\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z240 E-1 F3000 ;move Z up a bit and retract filament even more\nG1 X0 F3000 ;move X to min endstops, so the head is out of the way\nG1 Y200 F3000 ;so the head is out of the way and Plate is moved forward\nM84 ;stepper off\nM107 ; fan off\nM82 ; absolute extrusion\n;End GCode end
default_filament_profile = Generic PLA @Infinity3D
-default_print_profile = 0.20mm GOOD @Infinity3D_DEV_200
\ No newline at end of file
+default_print_profile = 0.20mm GOOD @Infinity3D_DEV_200
diff --git a/resources/profiles/Jubilee.ini b/resources/profiles/Jubilee.ini
index dc359046f59..5556392a430 100644
--- a/resources/profiles/Jubilee.ini
+++ b/resources/profiles/Jubilee.ini
@@ -13,7 +13,6 @@ config_version = 2.0.0
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Jubilee/
# The printer models will be shown by the Configuration Wizard in this order,
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Jubilee/
[printer_model:Jubilee]
name = Jubilee
variants = 0.4; Volcano 0.4
@@ -22,7 +21,6 @@ bed_model = Jubilee_bed.stl
bed_texture = Jubilee_texture.svg
default_materials = Generic PLA @Jubilee; Generic PETG @Jubilee
-thumbnail = Jubilee_thumbnail.png
[print:*common*]
avoid_crossing_perimeters = 0
bottom_fill_pattern = monotonic
@@ -516,4 +514,4 @@ inherits = *common*
printer_model = Jubilee
printer_variant = Volcano 0.4
printer_notes = Volcano
-default_print_profile = 0.2mm Volcano, aesthetic @Jubilee
\ No newline at end of file
+default_print_profile = 0.2mm Volcano, aesthetic @Jubilee
diff --git a/resources/profiles/LNL3D.ini b/resources/profiles/LNL3D.ini
index 39167b90017..ab14b31680c 100644
--- a/resources/profiles/LNL3D.ini
+++ b/resources/profiles/LNL3D.ini
@@ -24,7 +24,6 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/LNL3D/
[printer_model:LNL3D_D3]
name = LNL3D D3
variants = 0.4; 0.2; 0.6; 0.8
@@ -34,7 +33,6 @@ bed_model = LNL3D_D3_bed.stl
bed_texture = LNL3D_D3_texture.svg
default_materials = Generic PLA @LNL3D; Generic PETG @LNL3D; Generic TPU @LNL3D;
-thumbnail = LNL3D_D3_thumbnail.png
[printer_model:LNL3D_D3_VULCAN]
name = LNL3D D3 Vulcan
variants = 0.4; 0.2; 0.6; 0.8
@@ -44,7 +42,6 @@ bed_model = LNL3D_D3_VULCAN_bed.stl
bed_texture = LNL3D_D3_VULCAN_texture.svg
default_materials = Generic PLA @LNL3D; Generic PETG @LNL3D; Generic TPU @LNL3D;
-thumbnail = LNL3D_D3_VULCAN_thumbnail.png
[printer_model:LNL3D_D3_V2]
name = LNL3D D3 V2
variants = 0.4; 0.2; 0.6; 0.8
@@ -54,7 +51,6 @@ bed_model = LNL3D_D3_V2_bed.stl
bed_texture = LNL3D_D3_V2_texture.svg
default_materials = Generic PLA @LNL3D; Generic PETG @LNL3D; Generic TPU @LNL3D;
-thumbnail = LNL3D_D3_V2_thumbnail.png
[printer_model:LNL3D_D5]
name = LNL3D D5
variants = 0.4; 0.2; 0.6; 0.8
@@ -64,7 +60,6 @@ bed_model = LNL3D_D5_bed.stl
bed_texture = LNL3D_D5_texture.svg
default_materials = Generic PLA @LNL3D; Generic PETG @LNL3D; Generic TPU @LNL3D;
-thumbnail = LNL3D_D5_thumbnail.png
[printer_model:LNL3D_D6]
name = LNL3D D6
variants = 0.4; 0.2; 0.6; 0.8
@@ -82,7 +77,6 @@ default_materials = Generic PLA @LNL3D; Generic PETG @LNL3D; Generic TPU @LNL3D;
# not make it into the user interface.
# Common print presets
-thumbnail = LNL3D_D6_thumbnail.png
[print:*common*]
avoid_crossing_perimeters = 0
bridge_acceleration = 250
@@ -1039,4 +1033,4 @@ inherits = *LNL3D_D6*; *0.4nozzle*
inherits = *LNL3D_D6*; *0.6nozzle*
[printer:LNL3D D6 (0.8 mm nozzle)]
-inherits = *LNL3D_D6*; *0.8nozzle*
\ No newline at end of file
+inherits = *LNL3D_D6*; *0.8nozzle*
diff --git a/resources/profiles/LulzBot.ini b/resources/profiles/LulzBot.ini
index f35552eb0dd..1d58f3abca5 100644
--- a/resources/profiles/LulzBot.ini
+++ b/resources/profiles/LulzBot.ini
@@ -8,7 +8,6 @@ name = LulzBot
config_version = 1.0.0
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/LulzBot/
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/LulzBot/
[printer_model:MINI_AERO]
name = Mini Aero
variants = 0.5
@@ -17,7 +16,6 @@ technology = FFF
#bed_texture = mini.svg
default_materials = Generic PLA @lulzbot; Generic PETG @lulzbot; Jessie PLA @lulzbot
-thumbnail = MINI_AERO_thumbnail.png
[printer_model:TAZ6_AERO]
name = Taz6 Aero
variants = 0.5
@@ -30,7 +28,6 @@ default_materials = Generic PLA @lulzbot; Generic PETG @lulzbot; Jessie PLA @lul
# technology = FFF
# default_materials = Generic PLA @lulzbot; Generic PETG @lulzbot; Jessie PLA @lulzbot
-thumbnail = TAZ6_AERO_thumbnail.png
[print:*common*]
avoid_crossing_perimeters = 0
bottom_fill_pattern = monotonic
@@ -424,4 +421,4 @@ z_offset = 0
# use_volumetric_e = 0
# variable_layer_height = 1
# wipe = 1
-# z_offset = 0
\ No newline at end of file
+# z_offset = 0
diff --git a/resources/profiles/MakerGear.ini b/resources/profiles/MakerGear.ini
index ea460437883..78a7aa29934 100644
--- a/resources/profiles/MakerGear.ini
+++ b/resources/profiles/MakerGear.ini
@@ -6,7 +6,6 @@ name = MakerGear
config_version = 1.0.0
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/MakerGear/
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/MakerGear/
[printer_model:MAKERGEAR_MICRO]
# bed_model = waiting on this one
default_materials = MakerGear PLA @MakerGear_MICRO
@@ -15,7 +14,6 @@ name = Micro
technology = FFF
variants = 0.40
-thumbnail = MAKERGEAR_MICRO_thumbnail.png
[printer_model:MAKERGEAR_M2]
bed_model = M2_M3.stl
bed_texture = M2_M3.svg
@@ -25,7 +23,6 @@ name = MakerGear M2(V4 Hotend)
technology = FFF
variants = 0.35; 0.50; 0.25; 0.75
-thumbnail = MAKERGEAR_M2_thumbnail.png
[printer_model:MAKERGEAR_M2_DUAL]
bed_model = M2_M3.stl
bed_texture = M2_M3.svg
@@ -35,7 +32,6 @@ name = MakerGear M2 Dual
technology = FFF
variants = 0.35; 0.50; 0.25; 0.75
-thumbnail = MAKERGEAR_M2_DUAL_thumbnail.png
[printer_model:MAKERGEAR_M3_SE]
bed_model = M2_M3.stl
bed_texture = M2_M3.svg
@@ -45,7 +41,6 @@ name = M3 - Single Extruder
technology = FFF
variants = 0.35; 0.50; 0.25; 0.75
-thumbnail = MAKERGEAR_M3_SE_thumbnail.png
[printer_model:MAKERGEAR_M3_ID_0]
bed_model = M2_M3.stl
bed_texture = M2_M3.svg
@@ -91,7 +86,6 @@ name = Ultra One
technology = FFF
variants = 0.50; 0.25; 0.35; 0.75
-thumbnail = MAKERGEAR_U1_thumbnail.png
[printer_model:MAKERGEAR_U1_DUPLICATION]
# bed_model =
# bed_texture =
diff --git a/resources/profiles/PapapiuLab.ini b/resources/profiles/PapapiuLab.ini
index a24fffd246a..71725f8a699 100644
--- a/resources/profiles/PapapiuLab.ini
+++ b/resources/profiles/PapapiuLab.ini
@@ -7,7 +7,6 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/PapapiuLab/
[printer_model:Papapiu_N1S]
name = Papapiu N1S
variants = 0.4
diff --git a/resources/profiles/Print4Taste.ini b/resources/profiles/Print4Taste.ini
index a7d4a095057..b8927e1f855 100644
--- a/resources/profiles/Print4Taste.ini
+++ b/resources/profiles/Print4Taste.ini
@@ -16,7 +16,6 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
# Printer model name will be shown by the installation wizard.
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Print4Taste/
[printer_model:MC2.0]
name = mycusini 2.0
variants = 1.0
@@ -26,7 +25,6 @@ bed_model = MC2.0_bed.stl
bed_texture = MC2.0_texture.svg
default_materials = mycusini 3D Choco @MC2.0
-thumbnail = MC2.0_thumbnail.png
[print:*common_MC2.0*]
bottom_solid_layers = 2
bridge_speed = 30
diff --git a/resources/profiles/PrusaResearch.ini b/resources/profiles/PrusaResearch.ini
index 7b1c2c35910..29b88262450 100644
--- a/resources/profiles/PrusaResearch.ini
+++ b/resources/profiles/PrusaResearch.ini
@@ -15,7 +15,6 @@ changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.
-config_url = http://10.24.3.3:8001/v1/repos/prusa-fff/PrusaResearch/
[printer_model:MK4IS]
name = Original Prusa MK4 Input Shaper
variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8
@@ -45,7 +44,6 @@ bed_model = mk4_bed.stl
bed_texture = mk4.svg
default_materials = Generic PLA @PG; Generic ABS @MK4; Generic PETG @PG; Prusament PLA @PG; Prusament rPLA @PG; Prusament PETG @PG; Prusament ASA @MK4; Prusament PC Blend @MK4; Prusament PC Blend Carbon Fiber @MK4; Prusament PVB @PG; Prusament PA11 Carbon Fiber @PG
-thumbnail = MK4_thumbnail.png
[printer_model:MK3.9]
name = Original Prusa MK3.9 Input Shaper
variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8
@@ -105,7 +103,6 @@ bed_model = mini_bed.stl
bed_texture = mini.svg
default_materials = Generic PLA; Generic ABS @MINI; Generic PETG @MINI; Prusament PLA; Prusament rPLA; Prusament PETG @MINI; Prusament ASA @MINI; Prusament PC Blend @MINI; Prusament PC Blend Carbon Fiber @MINI; Prusament PVB
-thumbnail = MINI_thumbnail.png
[printer_model:MK3S]
name = Original Prusa i3 MK3S && MK3S+
variants = 0.4; 0.25; 0.6; 0.8
@@ -115,7 +112,6 @@ bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament rPLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber
-thumbnail = MK3S_thumbnail.png
[printer_model:MK3]
name = Original Prusa i3 MK3
variants = 0.4; 0.25; 0.6; 0.8
@@ -125,7 +121,6 @@ bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament rPLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber
-thumbnail = MK3_thumbnail.png
[printer_model:MK3SMMU3]
name = Original Prusa i3 MK3S && MK3S+ MMU3
variants = 0.4; 0.25; 0.6; 0.8
@@ -135,7 +130,6 @@ bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU; Prusament PETG @MMU; Prusament ASA @MMU; Verbatim BVOH @MMU; Prusament PC Blend @MMU; Prusament PC Blend Carbon Fiber @MMU; Prusament PVB @MMU
-thumbnail = MK3SMMU3_thumbnail.png
[printer_model:MK3SMMU2S]
name = Original Prusa i3 MK3S && MK3S+ MMU2S
variants = 0.4; 0.25; 0.6; 0.8
@@ -145,7 +139,6 @@ bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU; Prusament PETG @MMU; Prusament ASA @MMU; Verbatim BVOH @MMU; Prusament PC Blend @MMU; Prusament PC Blend Carbon Fiber @MMU; Prusament PVB @MMU
-thumbnail = MK3SMMU2S_thumbnail.png
[printer_model:MK3MMU2]
name = Original Prusa i3 MK3 MMU2
variants = 0.4; 0.25; 0.6; 0.8
@@ -155,7 +148,6 @@ bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU; Prusament PETG @MMU; Prusament ASA @MMU; Verbatim BVOH @MMU; Prusament PC Blend @MMU; Prusament PC Blend Carbon Fiber @MMU; Prusament PVB @MMU
-thumbnail = MK3MMU2_thumbnail.png
[printer_model:XLIS]
name = Original Prusa XL Input Shaper
variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8
@@ -175,7 +167,6 @@ bed_model = xl_bed.stl
bed_texture = xl.svg
default_materials = Generic PLA @XL; Generic ABS @XL; Generic PETG @XL; Prusament PLA @XL; Prusament rPLA @XL; Prusament PETG @XL; Prusament ASA @XL; Prusament PC Blend @XL; Prusament PC Blend Carbon Fiber @XL; Prusament PVB @XL; Prusament PA11 Carbon Fiber @XL
-thumbnail = XL_thumbnail.png
[printer_model:XL2IS]
name = Original Prusa XL - 2T Input Shaper
variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8
@@ -195,7 +186,6 @@ bed_model = xl_bed.stl
bed_texture = xl.svg
default_materials = Generic PLA @XL; Generic ABS @XL; Generic PETG @XL; Prusament PLA @XL; Prusament rPLA @XL; Prusament PETG @XL; Prusament ASA @XL; Prusament PC Blend @XL; Prusament PC Blend Carbon Fiber @XL; Prusament PVB @XL; Prusament PA11 Carbon Fiber @XL; Verbatim BVOH @XL
-thumbnail = XL2_thumbnail.png
[printer_model:XL5IS]
name = Original Prusa XL - 5T Input Shaper
variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8
@@ -215,7 +205,6 @@ bed_model = xl_bed.stl
bed_texture = xl.svg
default_materials = Generic PLA @XL; Generic ABS @XL; Generic PETG @XL; Prusament PLA @XL; Prusament rPLA @XL; Prusament PETG @XL; Prusament ASA @XL; Prusament PC Blend @XL; Prusament PC Blend Carbon Fiber @XL; Prusament PVB @XL; Prusament PA11 Carbon Fiber @XL; Verbatim BVOH @XL
-thumbnail = XL5_thumbnail.png
[printer_model:MK2.5S]
name = Original Prusa i3 MK2.5S
variants = 0.4; 0.25; 0.6; 0.8
@@ -225,7 +214,6 @@ bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament rPLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber @MK2
-thumbnail = MK2.5S_thumbnail.png
[printer_model:MK2.5]
name = Original Prusa i3 MK2.5
variants = 0.4; 0.25; 0.6; 0.8
@@ -235,7 +223,6 @@ bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament rPLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber @MK2
-thumbnail = MK2.5_thumbnail.png
[printer_model:MK2.5SMMU2S]
name = Original Prusa i3 MK2.5S MMU2S
variants = 0.4; 0.25; 0.6; 0.8
@@ -245,7 +232,6 @@ bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU; Prusament PETG @MMU; Prusament ASA @MMU; Verbatim BVOH @MMU; Prusament PC Blend @MMU; Prusament PC Blend Carbon Fiber @MMU; Prusament PVB @MMU
-thumbnail = MK2.5SMMU2S_thumbnail.png
[printer_model:MK2.5MMU2]
name = Original Prusa i3 MK2.5 MMU2
variants = 0.4; 0.25; 0.6; 0.8
@@ -255,7 +241,6 @@ bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU; Prusament PETG @MMU; Prusament ASA @MMU; Verbatim BVOH @MMU; Prusament PC Blend @MMU; Prusament PC Blend Carbon Fiber @MMU; Prusament PVB @MMU
-thumbnail = MK2.5MMU2_thumbnail.png
[printer_model:MK2S]
name = Original Prusa i3 MK2S
variants = 0.4; 0.25; 0.6
@@ -265,7 +250,6 @@ bed_model = mk2_bed.stl
bed_texture = mk2.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament rPLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber @MK2
-thumbnail = MK2S_thumbnail.png
[printer_model:MK2SMM]
name = Original Prusa i3 MK2S MMU1
variants = 0.4; 0.6
@@ -280,7 +264,6 @@ default_materials = Generic PLA; Generic ABS; Generic PETG @MMU1; Prusament PLA
# Common print presets
-thumbnail = MK2SMM_thumbnail.png
[print:*common*]
avoid_crossing_perimeters = 0
thick_bridges = 0
@@ -18326,4 +18309,4 @@ default_print_profile = 0.25mm SPEED @MK3.5 0.6
# The obsolete presets will be removed when upgrading from the legacy configuration structure (up to Slic3r 1.39.2) to 1.40.0 and newer.
[obsolete_presets]
print="0.05mm DETAIL 0.25 nozzle";"0.05mm DETAIL MK3";"0.05mm DETAIL";"0.20mm NORMAL MK3";"0.35mm FAST MK3";"print:0.15mm OPTIMAL MK3 MMU2";"print:0.20mm FAST MK3 MMU2"
-filament="ColorFabb Brass Bronze 1.75mm";"ColorFabb HT 1.75mm";"ColorFabb nGen 1.75mm";"ColorFabb Woodfil 1.75mm";"ColorFabb XT 1.75mm";"ColorFabb XT-CF20 1.75mm";"E3D PC-ABS 1.75mm";"Fillamentum ABS 1.75mm";"Fillamentum ASA 1.75mm";"Generic ABS 1.75mm";"Generic PET 1.75mm";"Generic PLA 1.75mm";"Prusa ABS 1.75mm";"Prusa HIPS 1.75mm";"Prusa PET 1.75mm";"Prusa PLA 1.75mm";"Taulman Bridge 1.75mm";"Taulman T-Glase 1.75mm"
\ No newline at end of file
+filament="ColorFabb Brass Bronze 1.75mm";"ColorFabb HT 1.75mm";"ColorFabb nGen 1.75mm";"ColorFabb Woodfil 1.75mm";"ColorFabb XT 1.75mm";"ColorFabb XT-CF20 1.75mm";"E3D PC-ABS 1.75mm";"Fillamentum ABS 1.75mm";"Fillamentum ASA 1.75mm";"Generic ABS 1.75mm";"Generic PET 1.75mm";"Generic PLA 1.75mm";"Prusa ABS 1.75mm";"Prusa HIPS 1.75mm";"Prusa PET 1.75mm";"Prusa PLA 1.75mm";"Taulman Bridge 1.75mm";"Taulman T-Glase 1.75mm"
diff --git a/resources/profiles/PrusaResearchSLA.ini b/resources/profiles/PrusaResearchSLA.ini
index 0fb83633536..2ecd7cdbb52 100644
--- a/resources/profiles/PrusaResearchSLA.ini
+++ b/resources/profiles/PrusaResearchSLA.ini
@@ -8,9 +8,9 @@ name = Prusa Research SLA
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 1.0.0-alpha0
-# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearchSLA/
-config_url = http://10.24.3.3:8001/v1/repos/prusa-sla/PrusaResearchSLA/
+# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
+
[printer_model:SL1S]
name = Original Prusa SL1S SPEED
variants = default
@@ -20,7 +20,6 @@ bed_model = sl1s_bed.stl
bed_texture = sl1s.svg
default_materials = Prusament Resin Tough Prusa Orange @0.05 SL1S
-thumbnail = SL1S_thumbnail.png
[printer_model:SL1]
name = Original Prusa SL1
variants = default
@@ -35,7 +34,6 @@ default_materials = Prusament Resin Tough Prusa Orange @0.05
# Common print presets
-thumbnail = SL1_thumbnail.png
[sla_print:*common*]
compatible_printers_condition = printer_model=="SL1"
layer_height = 0.05
diff --git a/resources/profiles/RatRig.ini b/resources/profiles/RatRig.ini
index d2914c5abad..a9d3c8c2ac2 100644
--- a/resources/profiles/RatRig.ini
+++ b/resources/profiles/RatRig.ini
@@ -23,7 +23,7 @@ config_version = 2.0.1
#Filaments
# Where to get the updates from?
-config_update_url =https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/RatRig/
+config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/RatRig/
# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.
@@ -34,7 +34,6 @@ config_update_url =https://files.prusa3d.com/wp-content/uploads/repository/Prusa
#####################################################################################################################################################################################################
# VC4 COREXY ####
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/RatRig/
[printer_model:VC4_300 COREXY]
name = RatRig V-Core-4.0 CoreXY 300mm
variants = 0.4; 0.5; 0.6
@@ -100,7 +99,6 @@ bed_model = rr-vc-300.stl
bed_texture = rr-vc-300.svg
default_materials = PunkFil ABS @RatRig; PunkFil PETG @RatRig; PunkFil PETG CF 10 @RatRig
-thumbnail = VC3_300_thumbnail.png
[printer_model:VC3_400]
name = RatRig V-Core-3.1 400mm
variants = 0.4; 0.5; 0.6
@@ -109,7 +107,6 @@ bed_model = rr-vc-400.stl
bed_texture = rr-vc-400.svg
default_materials = PunkFil ABS @RatRig; PunkFil PETG @RatRig; PunkFil PETG CF 10 @RatRig
-thumbnail = VC3_400_thumbnail.png
[printer_model:VC3_500]
name = RatRig V-Core-3.1 500mm
variants = 0.4; 0.5; 0.6
@@ -119,7 +116,6 @@ bed_texture = rr-vc-500.svg
default_materials = PunkFil ABS @RatRig; PunkFil PETG @RatRig; PunkFil PETG CF 10 @RatRig
# V-Minion ###
-thumbnail = VC3_500_thumbnail.png
[printer_model:VMINION]
name = RatRig V-Minion
variants = 0.4; 0.5; 0.6
@@ -136,7 +132,6 @@ default_materials = PunkFil ABS @RatRig; PunkFil PETG @RatRig; PunkFil PETG CF 1
# All presets starting with asterisk, for example *common*, are intermediate and they will
# not make it into the user interface.
-thumbnail = VMINION_thumbnail.png
[print:*common*]
allow_empty_layers = 0
top_solid_layers = 4
@@ -284,15 +279,15 @@ support_material_extrusion_width = 0.65
# LAYER HEIGH SETTINGS ####################################################################################################################################################
# DONT EDIT ###############################################################################################################################################################
-[print:*0.20mm*]
+[print:*0.20mm*]
inherits = *common*
layer_height = 0.2
-[print:*0.25mm*]
+[print:*0.25mm*]
inherits = *common*
layer_height = 0.25
-[print:*0.30mm*]
+[print:*0.30mm*]
inherits = *common*
layer_height = 0.3
enable_dynamic_overhang_speeds = 1
@@ -941,7 +936,7 @@ max_layer_height = 0.32
min_layer_height = 0.07
nozzle_diameter = 0.5
-[printer:RatRig V-Core-4.0_CoreXY-400 0.6Nozzle]
+[printer:RatRig V-Core-4.0_CoreXY-400 0.6Nozzle]
bed_shape = 0x0,400x0,400x400,0x400
max_print_height = 400
printer_model = VC4_400 COREXY
diff --git a/resources/profiles/RatRig/vc4-corexy.png b/resources/profiles/RatRig/vc4-corexy.png
new file mode 100644
index 00000000000..54888442d0c
Binary files /dev/null and b/resources/profiles/RatRig/vc4-corexy.png differ
diff --git a/resources/profiles/RatRig/vc4-hybrid.png b/resources/profiles/RatRig/vc4-hybrid.png
new file mode 100644
index 00000000000..399abe1e17c
Binary files /dev/null and b/resources/profiles/RatRig/vc4-hybrid.png differ
diff --git a/resources/profiles/Rigid3D.ini b/resources/profiles/Rigid3D.ini
index e0ead3d5390..034503b0f3d 100644
--- a/resources/profiles/Rigid3D.ini
+++ b/resources/profiles/Rigid3D.ini
@@ -15,7 +15,6 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Rigid3D/
[printer_model:Zero2]
name = Rigid3D Zero2
variants = 0.4
@@ -25,7 +24,6 @@ bed_model = zero_bed.stl
bed_texture = zero2_bed.png
default_materials = Generic PLA @Rigid3D; Generic PETG @Rigid3D; Generic ABS @Rigid3D; Rigid3D PLA @Rigid3D; Generic Nylon @Rigid3D; Generic FLEX @Rigid3D
-thumbnail = Zero2_thumbnail.png
[printer_model:Zero3]
name = Rigid3D Zero3
variants = 0.4
@@ -35,7 +33,6 @@ bed_model = zero_bed.stl
bed_texture = zero3_bed.png
default_materials =Generic PLA @Rigid3D; Generic PETG @Rigid3D; Generic ABS @Rigid3D; Rigid3D PLA @Rigid3D; Generic Nylon @Rigid3D; Generic FLEX @Rigid3D
-thumbnail = Zero3_thumbnail.png
[printer_model:Mucit]
name = Rigid3D Mucit
variants = 0.4
@@ -45,7 +42,6 @@ bed_model = mucit_bed.stl
bed_texture = mucit_bed.png
default_materials = Generic PLA @Rigid3D; Rigid3D PLA @Rigid3D
-thumbnail = Mucit_thumbnail.png
[printer_model:Mucit2]
name = Rigid3D Mucit2
variants = 0.4
@@ -59,7 +55,6 @@ default_materials = Generic PLA @Rigid3D; Generic PETG @Rigid3D; Generic ABS @Ri
# not make it into the user interface.
# Common print preset
-thumbnail = Mucit2_thumbnail.png
[print:*common*]
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
@@ -472,4 +467,4 @@ max_print_height = 150
printer_model = Mucit2
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_RIGID3D\nPRINTER_MODEL_MUCIT2\nPRINTER_HAS_HEATEDBED\n
start_gcode = G21\nG92 E0\nM140 S[first_layer_bed_temperature]\nM104 S[first_layer_temperature]\nG28\nM420 S1\nM107\nG90\nM190 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nG1 X10.0 Y0.1 Z0.3 F3000.0\nG1 X140.0 Y0.1 Z0.3 F1500.0 E10\nG1 X140 Y0.4 Z0.3 F3000.0\nG1 X10.0 Y0.4 Z0.3 F1500.0 E20\nG1 Z2.0 F1500.0\nG92 E0\n
-end_gcode = G92 E0\nT0\nG1 F1800 E-2\nG27 P2\nM107\nM104 T0 S0\nM140 S0\nG90\nG92 E0\nM18\n
\ No newline at end of file
+end_gcode = G92 E0\nT0\nG1 F1800 E-2\nG27 P2\nM107\nM104 T0 S0\nM140 S0\nG90\nG92 E0\nM18\n
diff --git a/resources/profiles/Snapmaker.ini b/resources/profiles/Snapmaker.ini
index d746a61702f..713dbb999c0 100644
--- a/resources/profiles/Snapmaker.ini
+++ b/resources/profiles/Snapmaker.ini
@@ -6,7 +6,6 @@ name = Snapmaker
config_version = 2.0.1
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Snapmaker/
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Snapmaker/
[printer_model:Snapmaker J1]
name = Snapmaker J1
variants = 0.4;0.2;0.6;0.8
@@ -4319,3 +4318,4 @@ max_layer_height = 0.48
min_layer_height = 0.24
nozzle_diameter = 0.8,0.8
inherits = *fdm_a400*
+
diff --git a/resources/profiles/Sovol.ini b/resources/profiles/Sovol.ini
index 15dcc29b310..959a060a27e 100644
--- a/resources/profiles/Sovol.ini
+++ b/resources/profiles/Sovol.ini
@@ -11,14 +11,13 @@ name = Sovol
config_version = 2.0.0
# Where to get the updates from?
-config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live//Sovol/
+config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Sovol/
# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Sovol/
[printer_model:SV06]
name = SV06
variants = 0.4; 0.3; 0.6; 0.8
@@ -28,7 +27,6 @@ bed_model = SV06_bed.stl
bed_texture = SV06_texture.svg
default_materials = Generic PLA @SOVOL; Generic ABS @SOVOL; Generic PETG @SOVOL; Prusament ASA @SOVOL; Prusament PC Blend @SOVOL; Prusament PC Blend Carbon Fiber @SOVOL; Prusament PA11 Carbon Fiber @SOVOL
-thumbnail = SV06_thumbnail.png
[printer_model:SV06 PLUS]
name = SV06 PLUS
variants = 0.4; 0.3; 0.6; 0.8
@@ -38,7 +36,6 @@ bed_model = SV06PLUS_bed.stl
bed_texture = SV06PLUS_texture.svg
default_materials = Generic PLA @SOVOL; Generic ABS @SOVOL; Generic PETG @SOVOL; Prusament ASA @SOVOL; Prusament PC Blend @SOVOL; Prusament PC Blend Carbon Fiber @SOVOL; Prusament PA11 Carbon Fiber @SOVOL
-thumbnail = SV06 PLUS_thumbnail.png
[printer_model:SV05]
name = SV05
variants = 0.4; 0.3; 0.6; 0.8
@@ -48,7 +45,6 @@ bed_model = SV05_bed.stl
bed_texture = SV03_texture.svg
default_materials = Generic PLA @SOVOL; Generic ABS @SOVOL; Generic PETG @SOVOL; Prusament ASA @SOVOL; Prusament PC Blend @SOVOL; Prusament PC Blend Carbon Fiber @SOVOL; Prusament PA11 Carbon Fiber @SOVOL
-thumbnail = SV05_thumbnail.png
[printer_model:SV04]
name = SV04
variants = 0.4; 0.3; 0.6; 0.8
@@ -58,7 +54,6 @@ bed_model = SV04_bed.stl
bed_texture = SV03_texture.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber
-thumbnail = SV04_thumbnail.png
[printer_model:SV03]
name = SV03 / SV03 BLTOUCH
variants = 0.4; 0.3; 0.6; 0.8
@@ -68,7 +63,6 @@ bed_model = SV03_bed.stl
bed_texture = SV03_texture.svg
default_materials = Generic PLA @SOVOL; Generic ABS @SOVOL; Generic PETG @SOVOL; Prusament ASA @SOVOL; Prusament PC Blend @SOVOL; Prusament PC Blend Carbon Fiber @SOVOL; Prusament PA11 Carbon Fiber @SOVOL
-thumbnail = SV03_thumbnail.png
[printer_model:SV02]
name = SV02 / SV02 BLTOUCH
variants = 0.4; 0.3; 0.6; 0.8
@@ -78,7 +72,6 @@ bed_model = SV01_bed.stl
bed_texture = SV03_texture.svg
default_materials = Generic PLA @SOVOL; Generic ABS @SOVOL; Generic PETG @SOVOL; Prusament ASA @SOVOL; Prusament PC Blend @SOVOL; Prusament PC Blend Carbon Fiber @SOVOL; Prusament PA11 Carbon Fiber @SOVOL
-thumbnail = SV02_thumbnail.png
[printer_model:SV01]
name = SV01 / SV01 BLTOUCH
variants = 0.4; 0.3; 0.6; 0.8
@@ -88,7 +81,6 @@ bed_model = SV01_bed.stl
bed_texture = SV03_texture.svg
default_materials = Generic PLA @SOVOL; Generic ABS @SOVOL; Generic PETG @SOVOL; Prusament ASA @SOVOL; Prusament PC Blend @SOVOL; Prusament PC Blend Carbon Fiber @SOVOL; Prusament PA11 Carbon Fiber @SOVOL
-thumbnail = SV01_thumbnail.png
[printer_model:SV01 PRO]
name = SV01 PRO
variants = 0.4; 0.3; 0.6; 0.8
@@ -103,7 +95,6 @@ default_materials = Generic PLA @SOVOL; Generic ABS @SOVOL; Generic PETG @SOVOL;
# Common print presets
-thumbnail = SV01 PRO_thumbnail.png
[print:*common*]
avoid_crossing_perimeters = 0
thick_bridges = 0
diff --git a/resources/profiles/Templates.ini b/resources/profiles/Templates.ini
index 343e5fc35ad..106b8a5f74e 100644
--- a/resources/profiles/Templates.ini
+++ b/resources/profiles/Templates.ini
@@ -9,7 +9,6 @@ templates_profile = 1
## Generic filament profiles
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Templates/
[filament:*common*]
cooling = 1
compatible_printers =
diff --git a/resources/profiles/TriLAB.ini b/resources/profiles/TriLAB.ini
index 8891396a892..97dbdea74d2 100644
--- a/resources/profiles/TriLAB.ini
+++ b/resources/profiles/TriLAB.ini
@@ -16,7 +16,6 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/TriLAB/
[printer_model:AQI]
name = AzteQ Industrial
variants = 0.4; 0.6; 0.8
@@ -26,7 +25,6 @@ bed_model = aq_bed.stl
bed_texture = aq_bed_texture.svg
default_materials = Fillamentum PLA (Door Opened) @AQI;Generic PLA (Door Opened) @AQI;Fillamentum PLA (PLA Printhead) @AQI;Fillamentum ABS @AQI;Generic ABS @AQI;Fillamentum ASA @AQI;Generic ASA @AQI;Prusament ASA @AQI;Fiberlogy Nylon PA12 @AQI;Prusament PC Blend @AQI;Polymaker PC @AQI;Polymaker PC @AQI 0.6 nozzle;Fillamentum PC/ABS @AQI;Fillamentum PC/ABS @AQI 0.6 nozzle;Fillamentum Nylon FX256 @AQI;Fillamentum Nylon FX256 @AQI 0.6 nozzle;Generic ABS @AQI 0.8 nozzle;Fillamentum ABS @AQI 0.8 nozzle;Fillamentum ASA @AQI 0.8 nozzle;Prusament ASA @AQI 0.8 nozzle;Prusament PC Blend @AQI 0.8 nozzle;Prusa EasyABS @AQI;Filament PM PAJet 160 @AQI;Prusament PLA (Door Opened) @AQI;Prusament PETG @AQI;Prusament PA11 Carbon Fiber @AQI;Smartfil PLA (Door Opened) @AQI;Prusament PETG Carbon Fiber @AQI
-thumbnail = AQI_thumbnail.png
[printer_model:AQD]
name = AzteQ Dynamic
variants = 0.4
@@ -36,7 +34,6 @@ bed_model = aq_bed.stl
bed_texture = aq_bed_texture.svg
default_materials = Prusament ASA @AQD; Prusa EasyABS @AQD;Prusament PLA (Door Opened) @AQD;Prusament PETG @AQD;Smartfil PLA (Door Opened) @AQD;Prusament PETG Carbon Fiber @AQD
-thumbnail = AQD_thumbnail.png
[printer_model:DQ2]
name = DeltiQ 2
variants = 0.4; 0.25; 0.6; 0.8
@@ -46,7 +43,6 @@ bed_model = dq2_bed.stl
bed_texture = dq2_bed_texture.svg
default_materials = Generic PLA @DQ2;Prusament PLA @DQ2;Fillamentum PLA @DQ2;Generic PETG @DQ2;Devil Design PETG @DQ2;Generic ABS @DQ2;Fillamentum ABS @DQ2;Fillamentum ASA @DQ2;Spectrum ASA @DQ2;Fillamentum CPE HG100 @DQ2;Fillamentum PLA @DQ2 0.25 nozzle;Devil Design PETG @DQ2 0.25 nozzle;Prusament PLA @DQ2 0.6 nozzle;Fillamentum PLA @DQ2 0.6 nozzle;Devil Design PETG @DQ2 0.6 nozzle;Fillamentum ABS @DQ2 0.6 nozzle;Fillamentum ASA @DQ2 0.6 nozzle;Spectrum ASA @DQ2 0.6 nozzle;Fillamentum CPE HG100 @DQ2 0.6 nozzle;Prusament PLA @DQ2 0.8 nozzle;Fillamentum PLA @DQ2 0.8 nozzle;Devil Design PETG @DQ2 0.8 nozzle;Fiberlogy Nylon PA12 @DQ2;Fillamentum Nylon CF15 @DQ2;Wax-Alike MoldLay @DQ2;Prusament PA11 Carbon Fiber @DQ2;Prusament PC Blend Carbon Fiber @DQ2;Prusament PETG @DQ2;Fiberlogy Nylon PA12+CF15 @DQ2;Fiberlogy Nylon PA12+GF15 @DQ2;Prusament PVB @DQ2;Prusament PC Blend Carbon Fiber @DQ2 0.6 nozzle;Fiberlogy Nylon PA12+CF15 @DQ2 0.6 nozzle;Fiberlogy Nylon PA12+GF15 @DQ2 0.6 nozzle
-thumbnail = DQ2_thumbnail.png
[printer_model:DQ2P]
name = DeltiQ 2 Plus
variants = 0.4; 0.25; 0.6; 0.8
@@ -56,7 +52,6 @@ bed_model = dq2_bed.stl
bed_texture = dq2_bed_texture.svg
default_materials = Generic PLA @DQ2;Prusament PLA @DQ2; Fillamentum PLA @DQ2;Generic PETG @DQ2;Devil Design PETG @DQ2;Generic ABS @DQ2;Fillamentum ABS @DQ2;Fillamentum ASA @DQ2;Spectrum ASA @DQ2;Fillamentum CPE HG100 @DQ2;Fillamentum PLA @DQ2 0.25 nozzle;Devil Design PETG @DQ2 0.25 nozzle;Prusament PLA @DQ2 0.6 nozzle;Fillamentum PLA @DQ2 0.6 nozzle;Devil Design PETG @DQ2 0.6 nozzle;Fillamentum ABS @DQ2 0.6 nozzle;Fillamentum ASA @DQ2 0.6 nozzle;Spectrum ASA @DQ2 0.6 nozzle;Fillamentum CPE HG100 @DQ2 0.6 nozzle;Prusament PLA @DQ2 0.8 nozzle;Fillamentum PLA @DQ2 0.8 nozzle;Devil Design PETG @DQ2 0.8 nozzle;Fiberlogy Nylon PA12 @DQ2;Fillamentum Nylon CF15 @DQ2;Wax-Alike MoldLay @DQ2;Prusament PA11 Carbon Fiber @DQ2;Prusament PC Blend Carbon Fiber @DQ2;Prusament PETG @DQ2;Fiberlogy Nylon PA12+CF15 @DQ2;Fiberlogy Nylon PA12+GF15 @DQ2;Prusament PVB @DQ2;Prusament PC Blend Carbon Fiber @DQ2 0.6 nozzle;Fiberlogy Nylon PA12+CF15 @DQ2 0.6 nozzle;Fiberlogy Nylon PA12+GF15 @DQ2 0.6 nozzle
-thumbnail = DQ2P_thumbnail.png
[printer_model:DQ2+FP2]
name = DeltiQ 2 + FlexPrint 2
variants = 0.4
@@ -66,7 +61,6 @@ bed_model = dq2_bed.stl
bed_texture = dq2_bed_texture.svg
default_materials = Generic PLA @DQ2FP2;Prusament PLA @DQ2FP2;Fillamentum PLA @DQ2FP2;Generic PETG @DQ2FP2;Devil Design PETG @DQ2FP2;Generic ABS @DQ2FP2;Fillamentum ABS @DQ2FP2;Fillamentum ASA @DQ2FP2;Fillamentum CPE HG100;Generic FLEX @DQ2FP2;Fillamentum TPU 92A @DQ2FP2;Fillamentum TPU 98A @DQ2FP2;Smartfil TPU 93A @DQ2FP2;Fillamentum PEBA 90A @DQ2FP2;Fiberlogy PP @DQ2FP2;NinjaTek TPU 75D @DQ2FP2
-thumbnail = DQ2+FP2_thumbnail.png
[printer_model:DQ2P+FP2]
name = DeltiQ 2 Plus + FlexPrint 2
variants = 0.4
@@ -76,7 +70,6 @@ bed_model = dq2_bed.stl
bed_texture = dq2_bed_texture.svg
default_materials = Generic PLA @DQ2FP2;Prusament PLA @DQ2FP2;Fillamentum PLA @DQ2FP2;Generic PETG @DQ2FP2;Devil Design PETG @DQ2FP2;Generic ABS @DQ2FP2;Fillamentum ABS @DQ2FP2;Fillamentum ASA @DQ2FP2;Fillamentum CPE HG100 @DQ2FP2;Generic FLEX @DQ2FP2;Fillamentum TPU 92A @DQ2FP2;Fillamentum TPU 98A @DQ2FP2;Smartfil TPU 93A @DQ2FP2;Fillamentum PEBA 90A @DQ2FP2;Fiberlogy PP @DQ2FP2;NinjaTek TPU 75D @DQ2FP2
-thumbnail = DQ2P+FP2_thumbnail.png
[printer_model:DQ2+FP]
name = DeltiQ 2 + FlexPrint
variants = 0.4
@@ -86,7 +79,6 @@ bed_model = dq2_bed.stl
bed_texture = dq2_bed_texture.svg
default_materials = Generic PLA @DQ2FP;Prusament PLA @DQ2FP;Fillamentum PLA @DQ2FP;Generic PETG @DQ2FP;Devil Design PETG @DQ2FP;Generic ABS @DQ2FP;Fillamentum ABS @DQ2FP;Fillamentum ASA @DQ2FP;Fillamentum CPE HG100 @DQ2FP;Generic FLEX @DQ2FP
-thumbnail = DQ2+FP_thumbnail.png
[printer_model:DQ2P+FP]
name = DeltiQ 2 Plus + FlexPrint
variants = 0.4
@@ -96,7 +88,6 @@ bed_model = dq2_bed.stl
bed_texture = dq2_bed_texture.svg
default_materials = Generic PLA @DQ2FP;Prusament PLA @DQ2FP;Fillamentum PLA @DQ2FP;Generic PETG @DQ2FP;Devil Design PETG @DQ2FP;Generic ABS @DQ2FP;Fillamentum ABS @DQ2FP;Fillamentum ASA @DQ2FP;Fillamentum CPE HG100 @DQ2FP;Generic FLEX @DQ2FP
-thumbnail = DQ2P+FP_thumbnail.png
[printer_model:DQM]
name = DeltiQ M
variants = 0.4
@@ -104,7 +95,6 @@ technology = FFF
family = DeltiQ
default_materials = PLA @DQ;ASA @DQ;PET @DQ;ABS @DQ;CPE @DQ
-thumbnail = DQM_thumbnail.png
[printer_model:DQL]
name = DeltiQ L
variants = 0.4
@@ -112,7 +102,6 @@ technology = FFF
family = DeltiQ
default_materials = PLA @DQ;ASA @DQ;PET @DQ;ABS @DQ;CPE @DQ
-thumbnail = DQL_thumbnail.png
[printer_model:DQXL]
name = DeltiQ XL
variants = 0.4
@@ -122,7 +111,6 @@ default_materials = PLA @DQ;ASA @DQ;PET @DQ;ABS @DQ;CPE @DQ
# DeltiQ print styles #
-thumbnail = DQXL_thumbnail.png
[print:0.20mm Normal @DQ]
renamed_from = "DeltiQ 0.20mm Normal"
avoid_crossing_perimeters = 0
diff --git a/resources/profiles/Trimaker.ini b/resources/profiles/Trimaker.ini
index b6c1373c33f..4e3a7fcbc09 100644
--- a/resources/profiles/Trimaker.ini
+++ b/resources/profiles/Trimaker.ini
@@ -15,7 +15,6 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Trimaker/
[printer_model:Trimaker Nebula Cloud]
name = Trimaker Nebula Cloud
family = Nebula
diff --git a/resources/profiles/Ultimaker.ini b/resources/profiles/Ultimaker.ini
index 0b5b9b2e787..56d62ee25e7 100644
--- a/resources/profiles/Ultimaker.ini
+++ b/resources/profiles/Ultimaker.ini
@@ -13,13 +13,12 @@ name = Ultimaker
config_version = 2.0.0
# Where to get the updates from?
-config_update_url =https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Ultimaker/
+config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Ultimaker/
# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Ultimaker/
[printer_model:ULTIMAKER2]
name = Ultimaker 2
variants = 0.4
@@ -40,7 +39,6 @@ default_materials = Generic PLA
# not make it into the user interface.
# Common print preset
-thumbnail = ULTIMAKERSline_thumbnail.png
[print:*common*]
avoid_crossing_perimeters = 1
avoid_crossing_perimeters_max_detour = 0
@@ -429,4 +427,4 @@ max_print_height = 300
printer_variant = 0.4
nozzle_diameter = 0.4,0.4
default_print_profile = 0.20mm NORMAL @ULTIMAKER
-default_filament_profile = Generic PLA @ULTIMAKER
\ No newline at end of file
+default_filament_profile = Generic PLA @ULTIMAKER
diff --git a/resources/profiles/Voron.ini b/resources/profiles/Voron.ini
index 2b3bbadb91a..9d35bf135ab 100644
--- a/resources/profiles/Voron.ini
+++ b/resources/profiles/Voron.ini
@@ -17,7 +17,6 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
# Printer model name will be shown by the installation wizard.
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Voron/
[printer_model:Voron_v2_250_afterburner]
name = Voron v2 250mm3
variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
@@ -27,7 +26,6 @@ bed_model = printbed-v2-250.stl
bed_texture = bedtexture-v2-250.png
default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
-thumbnail = Voron_v2_250_afterburner_thumbnail.png
[printer_model:Voron_v2_300_afterburner]
name = Voron v2 300mm3
variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
@@ -37,7 +35,6 @@ bed_model = printbed-v2-300.stl
bed_texture = bedtexture-v2-300.png
default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
-thumbnail = Voron_v2_300_afterburner_thumbnail.png
[printer_model:Voron_v2_350_afterburner]
name = Voron v2 350mm3
variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
@@ -47,7 +44,6 @@ bed_model = printbed-v2-350.stl
bed_texture = bedtexture-v2-350.png
default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
-thumbnail = Voron_v2_350_afterburner_thumbnail.png
[printer_model:Voron_v2_250]
name = Voron v2 250mm3
variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
@@ -57,7 +53,6 @@ bed_model = printbed-v2-250.stl
bed_texture = bedtexture-v2-250.png
default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
-thumbnail = Voron_v2_250_thumbnail.png
[printer_model:Voron_v2_300]
name = Voron v2 300mm3
variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
@@ -67,7 +62,6 @@ bed_model = printbed-v2-300.stl
bed_texture = bedtexture-v2-300.png
default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
-thumbnail = Voron_v2_300_thumbnail.png
[printer_model:Voron_v2_350]
name = Voron v2 350mm3
variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
@@ -77,7 +71,6 @@ bed_model = printbed-v2-350.stl
bed_texture = bedtexture-v2-350.png
default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
-thumbnail = Voron_v2_350_thumbnail.png
[printer_model:Voron_v1_250_afterburner]
name = Voron v1 250mm3
variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8
@@ -87,7 +80,6 @@ bed_model = printbed-v1-250.stl
bed_texture = bedtexture-v1-250.png
default_materials = Basic PLA @VORON; Basic PET @VORON; Basic ABS @VORON
-thumbnail = Voron_v1_250_afterburner_thumbnail.png
[printer_model:Voron_v1_300_afterburner]
name = Voron v1 300mm3
variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8
@@ -97,7 +89,6 @@ bed_model = printbed-v1-300.stl
bed_texture = bedtexture-v1-300.png
default_materials = Basic PLA @VORON; Basic PET @VORON; Basic ABS @VORON
-thumbnail = Voron_v1_300_afterburner_thumbnail.png
[printer_model:Voron_v1_350_afterburner]
name = Voron v1 350mm3
variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8
@@ -107,7 +98,6 @@ bed_model = printbed-v1-350.stl
bed_texture = bedtexture-v2-350.png
default_materials = Basic PLA @VORON; Basic PET @VORON; Basic ABS @VORON
-thumbnail = Voron_v1_350_afterburner_thumbnail.png
[printer_model:Voron_v0_120]
name = Voron Zero 120mm3
variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
@@ -117,7 +107,6 @@ bed_model = printbed-v0-120.stl
bed_texture = bedtexture-v0-120.png
default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
-thumbnail = Voron_v0_120_thumbnail.png
[printer_model:Voron_SW_afterburner]
name = Voron Switchwire
variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
@@ -1901,3 +1890,4 @@ inherits = *kvpABS*
filament_vendor = KVP
filament_max_volumetric_speed = 17
compatible_printers_condition = printer_model=~/.*Voron.*/ and printer_notes=~/.*VOLCANO.*/
+
diff --git a/resources/profiles/Zonestar.ini b/resources/profiles/Zonestar.ini
index 0e64cd832b5..303dea3a1e5 100644
--- a/resources/profiles/Zonestar.ini
+++ b/resources/profiles/Zonestar.ini
@@ -16,7 +16,6 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Zonestar/
[printer_model:Z5]
name = Zonestar Z5
variants = 0.4
@@ -25,7 +24,6 @@ bed_model = bed_220.stl
bed_texture = 220_texture.svg
default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @Zonestar; Generic TPU @Zonestar
-thumbnail = Z5_thumbnail.png
[printer_model:Z6]
name = Zonestar Z6
variants = 0.4
@@ -34,7 +32,6 @@ bed_model = bed_150.stl
bed_texture = 150_texture.svg
default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @Zonestar; Generic TPU @Zonestar
-thumbnail = Z6_thumbnail.png
[printer_model:Z5X]
name = Zonestar Z5X
variants = 0.4
@@ -43,7 +40,6 @@ bed_model = bed_310.stl
bed_texture = 310_texture.svg
default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @Zonestar; Generic TPU @Zonestar
-thumbnail = Z5X_thumbnail.png
[printer_model:Z8]
name = Zonestar Z8
variants = 0.4
@@ -52,7 +48,6 @@ bed_model = bed_310.stl
bed_texture = 310_texture.svg
default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @Zonestar; Generic TPU @Zonestar
-thumbnail = Z8_thumbnail.png
[printer_model:Z9]
name = Zonestar Z9
variants = 0.4
@@ -65,7 +60,6 @@ default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @
#### print ####
###################
-thumbnail = Z9_thumbnail.png
[print:*common*]
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
@@ -748,4 +742,4 @@ retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 40
start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
-use_relative_e_distances = 0
\ No newline at end of file
+use_relative_e_distances = 0
diff --git a/resources/profiles/gCreate.ini b/resources/profiles/gCreate.ini
index 476c8a8bd0f..7636650664d 100644
--- a/resources/profiles/gCreate.ini
+++ b/resources/profiles/gCreate.ini
@@ -28,7 +28,6 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
# Common filament settings > common filament settings based on type > Specific settings based on vendor
#
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/gCreate/
[printer_model:GMAX15P]
name = gMax 1.5XT Plus
variants = 0.5; 0.3; 0.4; 0.8; 1.0
@@ -38,7 +37,6 @@ bed_model = gmax15p_bed.stl
bed_texture = gmax15p.svg
default_materials = Generic PLA @GCREATE; Generic PETG @GCREATE; Generic ABS @GCREATE; Prusament PLA @GCREATE; Prusament PETG @GCREATE; Generic TPU 90A @GCREATE; Generic CF PETG @GCREATE; Generic CF Nylon @GCREATE; Generic CF PLA @GCREATE
-thumbnail = GMAX15P_thumbnail.png
[printer_model:GMAX2]
name = gMax 2
variants = 0.5; 0.3; 0.4; 0.8; 1.0
@@ -50,7 +48,6 @@ bed_texture = gmax2.svg
default_materials = Generic PLA @GCREATE; Generic PETG @GCREATE; Generic ABS @GCREATE; Prusament PLA @GCREATE; Prusament PETG @GCREATE; Generic TPU 90A @GCREATE; Generic CF PETG @GCREATE; Generic CF Nylon @GCREATE; Generic CF PLA @GCREATE
-thumbnail = GMAX2_thumbnail.png
[printer_model:GMAX2PRO]
name = gMax 2 Pro
variants = 0.5; 0.3; 0.4; 0.8; 1.0
@@ -61,7 +58,6 @@ bed_model = gmax2_bed.stl
bed_texture = gmax2.svg
default_materials = Generic PLA @GCREATE; Generic PETG @GCREATE; Generic ABS @GCREATE; Prusament PLA @GCREATE; Prusament PETG @GCREATE; Generic TPU 90A @GCREATE; Generic CF PETG @GCREATE; Generic CF Nylon @GCREATE; Generic CF PLA @GCREATE
-thumbnail = GMAX2PRO_thumbnail.png
[printer_model:GMAX2DUAL2IN1]
name = gMax 2 Dual 2in1
variants = 0.5
@@ -72,7 +68,6 @@ bed_model = gmax2_bed.stl
bed_texture = gmax2.svg
default_materials = Generic PLA @GCREATE; Generic PETG @GCREATE; Generic ABS @GCREATE; Prusament PLA @GCREATE; Prusament PETG @GCREATE; Generic TPU 90A @GCREATE; Generic CF PETG @GCREATE; Generic CF Nylon @GCREATE; Generic CF PLA @GCREATE
-thumbnail = GMAX2DUAL2IN1_thumbnail.png
[printer_model:GMAX2DUAL]
name = gMax 2 Dual Chimera
variants = 0.5
@@ -87,7 +82,6 @@ default_materials = Generic PLA @GCREATE; Generic PETG @GCREATE; Generic ABS @GC
# not make it into the user interface.
# Common print presets for every printer model. will be overtaken by presets further down that are printer, filament nozzle or layer height specific
-thumbnail = GMAX2DUAL_thumbnail.png
[print:*common*]
avoid_crossing_perimeters = 0
bridge_angle = 0
@@ -1165,4 +1159,4 @@ inherits = *gCreate gMax 2 Dual Chimera*
printer_variant = 0.5
nozzle_diameter = 0.5, 0.5
max_layer_height = 0.4
-min_layer_height = 0.15
\ No newline at end of file
+min_layer_height = 0.15