diff --git a/.github/workflows/bloat_check.yaml b/.github/workflows/bloat_check.yaml
index 43a3993eee6a91..465526ea8799e4 100644
--- a/.github/workflows/bloat_check.yaml
+++ b/.github/workflows/bloat_check.yaml
@@ -34,7 +34,7 @@ jobs:
         runs-on: ubuntu-latest
 
         container:
-            image: ghcr.io/project-chip/chip-build:90
+            image: ghcr.io/project-chip/chip-build:92
 
         steps:
             - name: Checkout
diff --git a/.github/workflows/build.yaml b/.github/workflows/build.yaml
index 92acd73acef165..4d16657b353871 100644
--- a/.github/workflows/build.yaml
+++ b/.github/workflows/build.yaml
@@ -43,7 +43,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build:90
+            image: ghcr.io/project-chip/chip-build:92
             volumes:
                 - "/:/runner-root-volume"
                 - "/tmp/log_output:/tmp/test_logs"
@@ -139,7 +139,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build:90
+            image: ghcr.io/project-chip/chip-build:92
             volumes:
                 - "/:/runner-root-volume"
                 - "/tmp/log_output:/tmp/test_logs"
@@ -308,7 +308,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build:90
+            image: ghcr.io/project-chip/chip-build:92
             volumes:
                 - "/:/runner-root-volume"
                 - "/tmp/log_output:/tmp/test_logs"
@@ -371,7 +371,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build:90
+            image: ghcr.io/project-chip/chip-build:92
             volumes:
                 - "/:/runner-root-volume"
                 - "/tmp/log_output:/tmp/test_logs"
@@ -490,7 +490,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build:90
+            image: ghcr.io/project-chip/chip-build:92
             volumes:
                 - "/:/runner-root-volume"
                 - "/tmp/log_output:/tmp/test_logs"
diff --git a/.github/workflows/chef.yaml b/.github/workflows/chef.yaml
index d7360f6cc4876d..d2298bbca33ca0 100644
--- a/.github/workflows/chef.yaml
+++ b/.github/workflows/chef.yaml
@@ -36,7 +36,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build:90
+            image: ghcr.io/project-chip/chip-build:92
             options: --user root
 
         steps:
@@ -57,7 +57,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-esp32:90
+            image: ghcr.io/project-chip/chip-build-esp32:92
             options: --user root
 
         steps:
@@ -78,7 +78,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-nrf-platform:90
+            image: ghcr.io/project-chip/chip-build-nrf-platform:92
             options: --user root
 
         steps:
@@ -99,7 +99,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-telink:90
+            image: ghcr.io/project-chip/chip-build-telink:92
             options: --user root
 
         steps:
@@ -111,7 +111,7 @@ jobs:
                 platform: telink
             # - name: Update Zephyr to specific revision (for developers purpose)
             #   shell: bash
-            #   run: scripts/run_in_build_env.sh "python3 scripts/tools/telink/update_zephyr.py f762f1a1027284e63e338e6d83deeade62f355b0"
+            #   run: scripts/run_in_build_env.sh "python3 scripts/tools/telink/update_zephyr.py 9ab2325bf76bc7bec92a3ff93fad80ec5d3eae7c"
             - name: CI Examples Telink
               shell: bash
               run: |
diff --git a/.github/workflows/doxygen.yaml b/.github/workflows/doxygen.yaml
index e345ff2a75a70e..4af7b3d8ed8eb2 100644
--- a/.github/workflows/doxygen.yaml
+++ b/.github/workflows/doxygen.yaml
@@ -84,7 +84,7 @@ jobs:
 
         runs-on: ubuntu-latest
         container:
-            image: ghcr.io/project-chip/chip-build-doxygen:90
+            image: ghcr.io/project-chip/chip-build-doxygen:92
 
         if: github.actor != 'restyled-io[bot]'
 
diff --git a/.github/workflows/examples-ameba.yaml b/.github/workflows/examples-ameba.yaml
index a4b40a19339507..92ee46b49dbf74 100644
--- a/.github/workflows/examples-ameba.yaml
+++ b/.github/workflows/examples-ameba.yaml
@@ -39,7 +39,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-ameba:90
+            image: ghcr.io/project-chip/chip-build-ameba:92
             options: --user root
 
         steps:
diff --git a/.github/workflows/examples-asr.yaml b/.github/workflows/examples-asr.yaml
index 143ce3364fafad..ce4fef94fde653 100644
--- a/.github/workflows/examples-asr.yaml
+++ b/.github/workflows/examples-asr.yaml
@@ -37,7 +37,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-asr:90
+            image: ghcr.io/project-chip/chip-build-asr:92
             options: --user root
 
         steps:
diff --git a/.github/workflows/examples-bouffalolab.yaml b/.github/workflows/examples-bouffalolab.yaml
index 2e9cf4a8849edd..ed6e583285ebd0 100644
--- a/.github/workflows/examples-bouffalolab.yaml
+++ b/.github/workflows/examples-bouffalolab.yaml
@@ -38,7 +38,7 @@ jobs:
     if: github.actor != 'restyled-io[bot]'
 
     container:
-      image: ghcr.io/project-chip/chip-build-bouffalolab:90
+      image: ghcr.io/project-chip/chip-build-bouffalolab:92
       volumes:
         - "/tmp/bloat_reports:/tmp/bloat_reports"
     steps:
diff --git a/.github/workflows/examples-cc13xx_26xx.yaml b/.github/workflows/examples-cc13xx_26xx.yaml
index 097a7d103eac95..68f5ecf09f7c9b 100644
--- a/.github/workflows/examples-cc13xx_26xx.yaml
+++ b/.github/workflows/examples-cc13xx_26xx.yaml
@@ -42,7 +42,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-ti:90
+            image: ghcr.io/project-chip/chip-build-ti:92
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
         steps:
diff --git a/.github/workflows/examples-cc32xx.yaml b/.github/workflows/examples-cc32xx.yaml
index 25afa79903f12d..935c5df723dea6 100644
--- a/.github/workflows/examples-cc32xx.yaml
+++ b/.github/workflows/examples-cc32xx.yaml
@@ -41,7 +41,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-ti:90
+            image: ghcr.io/project-chip/chip-build-ti:92
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
         steps:
diff --git a/.github/workflows/examples-efr32.yaml b/.github/workflows/examples-efr32.yaml
index dd9fb120a365b2..1b970abf6a52af 100644
--- a/.github/workflows/examples-efr32.yaml
+++ b/.github/workflows/examples-efr32.yaml
@@ -41,7 +41,7 @@ jobs:
     if: github.actor != 'restyled-io[bot]'
 
     container:
-      image: ghcr.io/project-chip/chip-build-efr32:90
+      image: ghcr.io/project-chip/chip-build-efr32:92
       volumes:
         - "/tmp/bloat_reports:/tmp/bloat_reports"
     steps:
diff --git a/.github/workflows/examples-esp32.yaml b/.github/workflows/examples-esp32.yaml
index 9853c0df51885d..ba90be6082c868 100644
--- a/.github/workflows/examples-esp32.yaml
+++ b/.github/workflows/examples-esp32.yaml
@@ -37,7 +37,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-esp32:90
+            image: ghcr.io/project-chip/chip-build-esp32:92
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
 
@@ -124,7 +124,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]' &&  github.repository_owner == 'espressif'
 
         container:
-            image: ghcr.io/project-chip/chip-build-esp32:90
+            image: ghcr.io/project-chip/chip-build-esp32:92
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
 
diff --git a/.github/workflows/examples-infineon.yaml b/.github/workflows/examples-infineon.yaml
index 49c2097cd696e8..165d9015fa5570 100644
--- a/.github/workflows/examples-infineon.yaml
+++ b/.github/workflows/examples-infineon.yaml
@@ -38,7 +38,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-infineon:90
+            image: ghcr.io/project-chip/chip-build-infineon:92
             env:
                # TODO: this should probably be part of the dockerfile itself
                CY_TOOLS_PATHS: /opt/Tools/ModusToolbox/tools_3.2
diff --git a/.github/workflows/examples-linux-arm.yaml b/.github/workflows/examples-linux-arm.yaml
index 46c2173530c6be..5815d1d1d35cda 100644
--- a/.github/workflows/examples-linux-arm.yaml
+++ b/.github/workflows/examples-linux-arm.yaml
@@ -37,7 +37,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-crosscompile:90
+            image: ghcr.io/project-chip/chip-build-crosscompile:92
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
 
diff --git a/.github/workflows/examples-linux-imx.yaml b/.github/workflows/examples-linux-imx.yaml
index e1d64f7a058f1e..69d832282a4fcb 100644
--- a/.github/workflows/examples-linux-imx.yaml
+++ b/.github/workflows/examples-linux-imx.yaml
@@ -37,7 +37,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-imx:90
+            image: ghcr.io/project-chip/chip-build-imx:92
 
         steps:
             - name: Checkout
diff --git a/.github/workflows/examples-linux-standalone.yaml b/.github/workflows/examples-linux-standalone.yaml
index 8c483cacd45651..5c1fbcbdf67dfb 100644
--- a/.github/workflows/examples-linux-standalone.yaml
+++ b/.github/workflows/examples-linux-standalone.yaml
@@ -37,7 +37,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build:90
+            image: ghcr.io/project-chip/chip-build:92
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
 
diff --git a/.github/workflows/examples-linux-tv-casting-app.yaml b/.github/workflows/examples-linux-tv-casting-app.yaml
index 14bfb6fb91b17c..8480509c00fcfc 100644
--- a/.github/workflows/examples-linux-tv-casting-app.yaml
+++ b/.github/workflows/examples-linux-tv-casting-app.yaml
@@ -37,7 +37,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build:90
+            image: ghcr.io/project-chip/chip-build:92
 
         steps:
             - name: Checkout
diff --git a/.github/workflows/examples-mw320.yaml b/.github/workflows/examples-mw320.yaml
index 077bdbbfb7f2b6..65a23f6b1ac509 100644
--- a/.github/workflows/examples-mw320.yaml
+++ b/.github/workflows/examples-mw320.yaml
@@ -40,7 +40,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build:90
+            image: ghcr.io/project-chip/chip-build:92
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
         steps:
diff --git a/.github/workflows/examples-nrfconnect.yaml b/.github/workflows/examples-nrfconnect.yaml
index 0db5e82e81d8e4..bc8fbde4da0be1 100644
--- a/.github/workflows/examples-nrfconnect.yaml
+++ b/.github/workflows/examples-nrfconnect.yaml
@@ -40,7 +40,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-nrf-platform:90
+            image: ghcr.io/project-chip/chip-build-nrf-platform:92
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
 
diff --git a/.github/workflows/examples-nuttx.yaml b/.github/workflows/examples-nuttx.yaml
index cccfa44557a4ba..e9b214f3e48868 100644
--- a/.github/workflows/examples-nuttx.yaml
+++ b/.github/workflows/examples-nuttx.yaml
@@ -38,7 +38,7 @@ jobs:
     if: github.actor != 'restyled-io[bot]'
 
     container:
-      image: ghcr.io/project-chip/chip-build-nuttx:90
+      image: ghcr.io/project-chip/chip-build-nuttx:92
       volumes:
         - "/tmp/bloat_reports:/tmp/bloat_reports"
     steps:
diff --git a/.github/workflows/examples-nxp.yaml b/.github/workflows/examples-nxp.yaml
index aa782544d2ae1d..9348baa83350db 100644
--- a/.github/workflows/examples-nxp.yaml
+++ b/.github/workflows/examples-nxp.yaml
@@ -40,7 +40,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-nxp:90
+            image: ghcr.io/project-chip/chip-build-nxp:92
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
         steps:
@@ -240,7 +240,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-nxp-zephyr:90
+            image: ghcr.io/project-chip/chip-build-nxp-zephyr:92
 
         steps:
             - name: Checkout
diff --git a/.github/workflows/examples-openiotsdk.yaml b/.github/workflows/examples-openiotsdk.yaml
index 2d59643eeb3aac..4ff65c0c941a14 100644
--- a/.github/workflows/examples-openiotsdk.yaml
+++ b/.github/workflows/examples-openiotsdk.yaml
@@ -36,7 +36,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-openiotsdk:90
+            image: ghcr.io/project-chip/chip-build-openiotsdk:92
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
             options: --privileged
diff --git a/.github/workflows/examples-qpg.yaml b/.github/workflows/examples-qpg.yaml
index 3287b281dc77ef..64f66788182b7b 100644
--- a/.github/workflows/examples-qpg.yaml
+++ b/.github/workflows/examples-qpg.yaml
@@ -40,7 +40,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build:90
+            image: ghcr.io/project-chip/chip-build:92
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
         steps:
diff --git a/.github/workflows/examples-stm32.yaml b/.github/workflows/examples-stm32.yaml
index d10c91a8e8ca6d..dad94e5267993b 100644
--- a/.github/workflows/examples-stm32.yaml
+++ b/.github/workflows/examples-stm32.yaml
@@ -41,7 +41,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build:90
+            image: ghcr.io/project-chip/chip-build:92
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
         steps:
diff --git a/.github/workflows/examples-telink.yaml b/.github/workflows/examples-telink.yaml
index 6c8b9bd5217f32..c24b8f5565bb24 100644
--- a/.github/workflows/examples-telink.yaml
+++ b/.github/workflows/examples-telink.yaml
@@ -39,7 +39,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-telink:90
+            image: ghcr.io/project-chip/chip-build-telink:92
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
 
@@ -58,7 +58,7 @@ jobs:
                 gh-context: ${{ toJson(github) }}
 
             # - name: Update Zephyr to specific revision (for developers purpose)
-            #   run: scripts/run_in_build_env.sh "python3 scripts/tools/telink/update_zephyr.py f762f1a1027284e63e338e6d83deeade62f355b0"
+            #   run: scripts/run_in_build_env.sh "python3 scripts/tools/telink/update_zephyr.py 9ab2325bf76bc7bec92a3ff93fad80ec5d3eae7c"
 
             - name: Build example Telink (B92 retention) Air Quality Sensor App
               # Run test for master and s07641069 PRs
@@ -167,6 +167,19 @@ jobs:
             - name: clean out build output (keep tools)
               run: rm -rf ./out/telink*
 
+            - name: Build example Telink (tl321x) Lighting App with OTA (LZMA), Shell, Factory Data
+              # Run test for master and all PRs
+              run: |
+                  ./scripts/run_in_build_env.sh \
+                    "./scripts/build/build_examples.py --target 'telink-tl3218x-light-ota-compress-lzma-shell-factory-data' build"
+                  .environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \
+                    telink tl3218x light-app-ota-compress-lzma-shell-factory-data \
+                    out/telink-tl3218x-light-ota-compress-lzma-shell-factory-data/zephyr/zephyr.elf \
+                    /tmp/bloat_reports/
+
+            - name: clean out build output (keep tools)
+              run: rm -rf ./out/telink*
+
             - name: Build example Telink (B92) Light Switch App with OTA (LZMA), Shell, Factory Data
               # Run test for master and all PRs
               run: |
diff --git a/.github/workflows/examples-tizen.yaml b/.github/workflows/examples-tizen.yaml
index f465f3999f0f26..a16ad58ee06583 100644
--- a/.github/workflows/examples-tizen.yaml
+++ b/.github/workflows/examples-tizen.yaml
@@ -37,7 +37,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-tizen:90
+            image: ghcr.io/project-chip/chip-build-tizen:92
             options: --user root
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
diff --git a/.github/workflows/full-android.yaml b/.github/workflows/full-android.yaml
index 6acc150c03a111..a020b78d7455b3 100644
--- a/.github/workflows/full-android.yaml
+++ b/.github/workflows/full-android.yaml
@@ -39,7 +39,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-android:90
+            image: ghcr.io/project-chip/chip-build-android:92
             volumes:
                 - "/tmp/log_output:/tmp/test_logs"
 
diff --git a/.github/workflows/fuzzing-build.yaml b/.github/workflows/fuzzing-build.yaml
index f36b370448fa66..97da04937e0648 100644
--- a/.github/workflows/fuzzing-build.yaml
+++ b/.github/workflows/fuzzing-build.yaml
@@ -33,7 +33,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build:90
+            image: ghcr.io/project-chip/chip-build:92
             volumes:
                 - "/tmp/log_output:/tmp/test_logs"
 
diff --git a/.github/workflows/java-tests.yaml b/.github/workflows/java-tests.yaml
index f416be3a4d2998..114f406f906e22 100644
--- a/.github/workflows/java-tests.yaml
+++ b/.github/workflows/java-tests.yaml
@@ -43,7 +43,7 @@ jobs:
         runs-on: ubuntu-latest
 
         container:
-            image: ghcr.io/project-chip/chip-build-java:90
+            image: ghcr.io/project-chip/chip-build-java:92
             options: --privileged --sysctl "net.ipv6.conf.all.disable_ipv6=0
                 net.ipv4.conf.all.forwarding=0 net.ipv6.conf.all.forwarding=0"
 
diff --git a/.github/workflows/lint.yml b/.github/workflows/lint.yml
index 590a2595ee6f96..9273dbe9912ae6 100644
--- a/.github/workflows/lint.yml
+++ b/.github/workflows/lint.yml
@@ -36,7 +36,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build:90
+            image: ghcr.io/project-chip/chip-build:92
 
         steps:
             - name: Checkout
diff --git a/.github/workflows/minimal-build.yaml b/.github/workflows/minimal-build.yaml
index da55158cc7c57f..682cf3de208528 100644
--- a/.github/workflows/minimal-build.yaml
+++ b/.github/workflows/minimal-build.yaml
@@ -34,7 +34,7 @@ jobs:
         runs-on: ubuntu-latest
 
         container:
-            image: ghcr.io/project-chip/chip-build-minimal:90
+            image: ghcr.io/project-chip/chip-build-minimal:92
 
         steps:
             - name: Checkout
@@ -56,7 +56,7 @@ jobs:
         runs-on: ubuntu-latest
 
         container:
-            image: ghcr.io/project-chip/chip-build-minimal:90
+            image: ghcr.io/project-chip/chip-build-minimal:92
 
         steps:
             - name: Checkout
diff --git a/.github/workflows/qemu.yaml b/.github/workflows/qemu.yaml
index 07b31eec0ddb11..187d4b8f0c6091 100644
--- a/.github/workflows/qemu.yaml
+++ b/.github/workflows/qemu.yaml
@@ -41,7 +41,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]' && github.repository_owner == 'espressif'
 
         container:
-            image: ghcr.io/project-chip/chip-build-esp32-qemu:90
+            image: ghcr.io/project-chip/chip-build-esp32-qemu:92
             volumes:
                 - "/tmp/log_output:/tmp/test_logs"
 
@@ -79,7 +79,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-tizen-qemu:90
+            image: ghcr.io/project-chip/chip-build-tizen-qemu:92
             options: --user root
             volumes:
                 - "/tmp/log_output:/tmp/test_logs"
diff --git a/.github/workflows/release_artifacts.yaml b/.github/workflows/release_artifacts.yaml
index 14b2c327452194..a50d5260b52107 100644
--- a/.github/workflows/release_artifacts.yaml
+++ b/.github/workflows/release_artifacts.yaml
@@ -32,7 +32,7 @@ jobs:
         runs-on: ubuntu-latest
 
         container:
-            image: ghcr.io/project-chip/chip-build-esp32:90
+            image: ghcr.io/project-chip/chip-build-esp32:92
 
         steps:
             - name: Checkout
@@ -64,7 +64,7 @@ jobs:
         runs-on: ubuntu-latest
 
         container:
-            image: ghcr.io/project-chip/chip-build-efr32:90
+            image: ghcr.io/project-chip/chip-build-efr32:92
         steps:
             - name: Checkout
               uses: actions/checkout@v4
diff --git a/.github/workflows/smoketest-android.yaml b/.github/workflows/smoketest-android.yaml
index 38a614e71246f5..c3293e8eb947cd 100644
--- a/.github/workflows/smoketest-android.yaml
+++ b/.github/workflows/smoketest-android.yaml
@@ -37,7 +37,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-android:90
+            image: ghcr.io/project-chip/chip-build-android:92
             volumes:
                 - "/:/runner-root-volume"
                 - "/tmp/log_output:/tmp/test_logs"
diff --git a/.github/workflows/tests.yaml b/.github/workflows/tests.yaml
index 9a31e56ca8ef54..384ebc59a93c1c 100644
--- a/.github/workflows/tests.yaml
+++ b/.github/workflows/tests.yaml
@@ -50,7 +50,7 @@ jobs:
         runs-on: ubuntu-latest
 
         container:
-            image: ghcr.io/project-chip/chip-build:90
+            image: ghcr.io/project-chip/chip-build:92
             options: --privileged --sysctl "net.ipv6.conf.all.disable_ipv6=0
                 net.ipv4.conf.all.forwarding=1 net.ipv6.conf.all.forwarding=1"
 
@@ -457,7 +457,7 @@ jobs:
         runs-on: ubuntu-latest
 
         container:
-            image: ghcr.io/project-chip/chip-build:90
+            image: ghcr.io/project-chip/chip-build:92
             options: --privileged --sysctl "net.ipv6.conf.all.disable_ipv6=0
                 net.ipv4.conf.all.forwarding=0 net.ipv6.conf.all.forwarding=0"
 
diff --git a/.github/workflows/unit_integration_test.yaml b/.github/workflows/unit_integration_test.yaml
index b2fc345bda1a9d..9b97c8d54e0ea2 100644
--- a/.github/workflows/unit_integration_test.yaml
+++ b/.github/workflows/unit_integration_test.yaml
@@ -40,7 +40,7 @@ jobs:
         runs-on: ubuntu-latest
 
         container:
-            image: ghcr.io/project-chip/chip-build:90
+            image: ghcr.io/project-chip/chip-build:92
             volumes:
                 - "/:/runner-root-volume"
                 - "/tmp/log_output:/tmp/test_logs"
diff --git a/.github/workflows/zap_regeneration.yaml b/.github/workflows/zap_regeneration.yaml
index 0d6d9b6db70ca8..649b867ba5ac0e 100644
--- a/.github/workflows/zap_regeneration.yaml
+++ b/.github/workflows/zap_regeneration.yaml
@@ -30,7 +30,7 @@ jobs:
 
         runs-on: ubuntu-20.04
         container:
-            image: ghcr.io/project-chip/chip-build:90
+            image: ghcr.io/project-chip/chip-build:92
         defaults:
             run:
                 shell: sh
diff --git a/.github/workflows/zap_templates.yaml b/.github/workflows/zap_templates.yaml
index c4edd57421ba6f..07f1bc4f2f51d0 100644
--- a/.github/workflows/zap_templates.yaml
+++ b/.github/workflows/zap_templates.yaml
@@ -35,7 +35,7 @@ jobs:
 
         runs-on: ubuntu-20.04
         container:
-            image: ghcr.io/project-chip/chip-build:90
+            image: ghcr.io/project-chip/chip-build:92
         defaults:
             run:
                 shell: sh
diff --git a/config/telink/chip-module/CMakeLists.txt b/config/telink/chip-module/CMakeLists.txt
index ade2bd310f8a02..0f925cdeffc904 100644
--- a/config/telink/chip-module/CMakeLists.txt
+++ b/config/telink/chip-module/CMakeLists.txt
@@ -174,7 +174,7 @@ add_dependencies(process_binaries ${ZEPHYR_FINAL_EXECUTABLE})
 # Define 'build_mcuboot' target for building the MCUBoot bootloader
 # ==============================================================================
 
-if (CONFIG_BOOTLOADER_MCUBOOT AND CONFIG_SOC_SERIES_RISCV_TELINK_B9X)
+if (CONFIG_BOOTLOADER_MCUBOOT AND (CONFIG_SOC_SERIES_RISCV_TELINK_B9X OR CONFIG_SOC_SERIES_RISCV_TELINK_TLX))
     add_custom_target(build_mcuboot ALL
         COMMAND
         west build -b ${BASE_BOARD} -d build_mcuboot ${ZEPHYR_BASE}/../bootloader/mcuboot/boot/zephyr
diff --git a/config/telink/chip-module/Kconfig b/config/telink/chip-module/Kconfig
index b06c7c855922d8..2937b2b0c66094 100644
--- a/config/telink/chip-module/Kconfig
+++ b/config/telink/chip-module/Kconfig
@@ -246,7 +246,8 @@ config CHIP_ENABLE_POWER_ON_FACTORY_RESET
 
 config CHIP_TASK_STACK_SIZE
 	int
-	default 4864 if PM
+	default 6192 if SOC_RISCV_TELINK_TL321X
+	default 5352 if PM
 	default 8192
 
 config CHIP_USE_MARS_SENSOR
diff --git a/config/telink/chip-module/Kconfig.defaults b/config/telink/chip-module/Kconfig.defaults
index bb722e8a3ab8bc..c220b5991f486a 100644
--- a/config/telink/chip-module/Kconfig.defaults
+++ b/config/telink/chip-module/Kconfig.defaults
@@ -34,6 +34,7 @@ choice LOG_MODE
 endchoice
 
 choice MATTER_LOG_LEVEL_CHOICE
+    default MATTER_LOG_LEVEL_WRN if SOC_RISCV_TELINK_TL321X
     default MATTER_LOG_LEVEL_DBG
 endchoice
 
@@ -61,17 +62,19 @@ config POSIX_MAX_FDS
 
 # Application stack size
 config MAIN_STACK_SIZE
-    default 3240 if PM
+    default 3240 if PM || SOC_RISCV_TELINK_TL321X
     default 4096
 
 config INIT_STACKS
     default y
 
 config IDLE_STACK_SIZE
-    default 512 if PM
+    default 512 if PM || SOC_RISCV_TELINK_TL321X
+
 
 config ISR_STACK_SIZE
     default 576 if PM
+    default 528 if SOC_RISCV_TELINK_TL321X
 
 config SYSTEM_WORKQUEUE_STACK_SIZE
     default 616 if PM
@@ -79,7 +82,8 @@ config SYSTEM_WORKQUEUE_STACK_SIZE
 config HEAP_MEM_POOL_SIZE
     default 256
 
-config COMMON_LIBC_MALLOC_ARENA_SIZE 
+config COMMON_LIBC_MALLOC_ARENA_SIZE
+    default 20716 if SOC_RISCV_TELINK_TL321X
     default 12288
 
 config NET_IPV6_MLD
@@ -92,19 +96,21 @@ config NET_IF_MCAST_IPV6_ADDR_COUNT
 
 # Network buffers
 config NET_PKT_RX_COUNT
-    default 4 if PM
+    default 4 if PM || SOC_RISCV_TELINK_TL321X
     default 8
 
 config NET_PKT_TX_COUNT
-    default 4 if PM
+    default 4 if PM || SOC_RISCV_TELINK_TL321X
     default 8
 
 config NET_BUF_RX_COUNT
     default 16 if PM
+    default 12 if SOC_RISCV_TELINK_TL321X
     default 32
 
 config NET_BUF_TX_COUNT
     default 16 if PM
+    default 12 if SOC_RISCV_TELINK_TL321X
     default 32
 
 config GPIO
@@ -133,44 +139,71 @@ config BT_MAX_CONN
     default 1
 
 config BT_L2CAP_TX_MTU
+    default 103 if SOC_RISCV_TELINK_TL321X
     default 247
 
 config BT_BUF_ACL_RX_SIZE
+    default 107 if SOC_RISCV_TELINK_TL321X
     default 251
 
 config BT_BUF_ACL_TX_SIZE
+    default 107 if SOC_RISCV_TELINK_TL321X
     default 251
 
+
+#ifdef CONFIG_SOC_RISCV_TELINK_TL321X
+
+config BT_BUF_EVT_RX_COUNT
+    default 4
+
+config BT_BUF_ACL_RX_COUNT
+    default 4
+
+config BT_GATT_CACHING
+    bool
+    default n
+
+
+#endif
+
 config BT_RX_STACK_SIZE
     default 1352 if BT_B9X
+    default 1010 if BT_TLX
     default 2048 if BT_W91
 
 config BT_HCI_TX_STACK_SIZE
     default 640 if BT_B9X
+    default 640 if BT_TLX
     default 2048 if BT_W91
 
 config BT_DEVICE_NAME_GATT_WRITABLE
     bool
     default n
 
-config B9X_BLE_CTRL_THREAD_STACK_SIZE
+if SOC_SERIES_RISCV_TELINK_B9X || SOC_SERIES_RISCV_TELINK_TLX
+
+config TL_BLE_CTRL_THREAD_STACK_SIZE
     default 648
 
-config B9X_BLE_CTRL_MASTER_MAX_NUM
+config TL_BLE_CTRL_MASTER_MAX_NUM
     default 0
 
-config B9X_BLE_CTRL_SLAVE_MAX_NUM
+config TL_BLE_CTRL_SLAVE_MAX_NUM
     default 1
 
-config B9X_BLE_CTRL_RF_POWER
+config TL_BLE_CTRL_RF_POWER
     default 3 if PM 
+    default 8 if BT_TLX
     default 9
 
-choice B9X_BLE_CTRL_MAC_TYPE
-    default B9X_BLE_CTRL_MAC_TYPE_RANDOM_STATIC
+choice TL_BLE_CTRL_MAC_TYPE
+    default TL_BLE_CTRL_MAC_TYPE_RANDOM_STATIC
 endchoice
 
-endif
+endif # SOC_SERIES_RISCV_TELINK_B9X || SOC_SERIES_RISCV_TELINK_TLX
+
+
+endif # BT
 
 # Board retention config
 if BOARD_TLSR9528A_RETENTION || BOARD_TLSR9258A_RETENTION || BOARD_TLSR9518ADK80D_RETENTION
@@ -182,11 +215,12 @@ config TELINK_B9X_MATTER_RETENTION_LAYOUT
 
 config PWM
     default n
+
 endif
 
 # Board non-retention config
 if  BOARD_TLSR9118BDK40D || BOARD_TLSR9118BDK40D_V1 || \
-    BOARD_TLSR9528A || BOARD_TLSR9258A || BOARD_TLSR9518ADK80D
+    BOARD_TLSR9528A || BOARD_TLSR9258A || BOARD_TLSR9518ADK80D || BOARD_TL3218X
 config PWM
     default y
 endif
@@ -222,6 +256,7 @@ config NVS_LOOKUP_CACHE
     default y
 
 config NVS_LOOKUP_CACHE_SIZE
+    default 400  if SOC_RISCV_TELINK_TL321X
     default 2048 if !PM
 
 # Set multiplicator of Name Value Storage (NVS) as 1 to reach NVS sector size 4KB
@@ -261,7 +296,7 @@ config CHIP_ENABLE_ICD_SUPPORT
 	default y if CHIP_THREAD_DEVICE_ROLE_SLEEPY_END_DEVICE
 
 config OPENTHREAD_THREAD_STACK_SIZE
-    default 2400 if PM
+    default 2400 if PM || SOC_RISCV_TELINK_TL321X
 
 config OPENTHREAD_RADIO_WORKQUEUE_STACK_SIZE
     default 432 if PM
@@ -284,10 +319,10 @@ config OPENTHREAD_IP6_MAX_EXT_MCAST_ADDRS
 endif # NET_L2_OPENTHREAD
 
 config NET_TX_STACK_SIZE
-    default 554 if PM
+    default 554 if PM || SOC_RISCV_TELINK_TL321X
 
 config NET_RX_STACK_SIZE
-    default 554 if PM
+    default 554 if PM || SOC_RISCV_TELINK_TL321X
 
 # Disable certain parts of Zephyr IPv6 stack
 config NET_IPV6_NBR_CACHE
diff --git a/examples/all-clusters-app/ameba/README.md b/examples/all-clusters-app/ameba/README.md
index 5cf2c9aab87015..53b4b6ce87db0e 100644
--- a/examples/all-clusters-app/ameba/README.md
+++ b/examples/all-clusters-app/ameba/README.md
@@ -27,11 +27,11 @@ The CHIP demo application is supported on
 
 -   Pull docker image:
 
-          $ docker pull ghcr.io/project-chip/chip-build-ameba:90
+          $ docker pull ghcr.io/project-chip/chip-build-ameba:92
 
 -   Run docker container:
 
-          $ docker run -it -v ${CHIP_DIR}:/root/chip ghcr.io/project-chip/chip-build-ameba:90
+          $ docker run -it -v ${CHIP_DIR}:/root/chip ghcr.io/project-chip/chip-build-ameba:92
 
 -   Setup build environment:
 
diff --git a/examples/all-clusters-minimal-app/ameba/README.md b/examples/all-clusters-minimal-app/ameba/README.md
index 447d950be39f86..f50cfee5e474cc 100644
--- a/examples/all-clusters-minimal-app/ameba/README.md
+++ b/examples/all-clusters-minimal-app/ameba/README.md
@@ -27,13 +27,13 @@ The CHIP demo application is supported on
 -   Pull docker image:
 
           ```
-          $ docker pull ghcr.io/project-chip/chip-build-ameba:90
+          $ docker pull ghcr.io/project-chip/chip-build-ameba:92
           ```
 
 -   Run docker container:
 
           ```
-          $ docker run -it -v ${CHIP_DIR}:/root/chip ghcr.io/project-chip/chip-build-ameba:90
+          $ docker run -it -v ${CHIP_DIR}:/root/chip ghcr.io/project-chip/chip-build-ameba:92
           ```
 
 -   Setup build environment:
diff --git a/examples/fabric-admin/README.md b/examples/fabric-admin/README.md
index 92fdffda6b830f..d9fb67de46799d 100644
--- a/examples/fabric-admin/README.md
+++ b/examples/fabric-admin/README.md
@@ -23,13 +23,13 @@ For Raspberry Pi 4 example:
 ### Pull Docker Images
 
 ```
-docker pull ghcr.io/project-chip/chip-build-crosscompile:90
+docker pull ghcr.io/project-chip/chip-build-crosscompile:92
 ```
 
 ### Run docker
 
 ```
-docker run -it -v ~/connectedhomeip:/var/connectedhomeip ghcr.io/project-chip/chip-build-crosscompile:90 /bin/bash
+docker run -it -v ~/connectedhomeip:/var/connectedhomeip ghcr.io/project-chip/chip-build-crosscompile:92 /bin/bash
 ```
 
 ### Build
diff --git a/examples/fabric-bridge-app/linux/README.md b/examples/fabric-bridge-app/linux/README.md
index 912bb32c01dafb..75f510da971564 100644
--- a/examples/fabric-bridge-app/linux/README.md
+++ b/examples/fabric-bridge-app/linux/README.md
@@ -100,13 +100,13 @@ defined:
     Pull Docker Images
 
     ```
-    docker pull ghcr.io/project-chip/chip-build-crosscompile:90
+    docker pull ghcr.io/project-chip/chip-build-crosscompile:92
     ```
 
     Run docker
 
     ```
-    docker run -it -v ~/connectedhomeip:/var/connectedhomeip ghcr.io/project-chip/chip-build-crosscompile:90 /bin/bash
+    docker run -it -v ~/connectedhomeip:/var/connectedhomeip ghcr.io/project-chip/chip-build-crosscompile:92 /bin/bash
     ```
 
     Build
diff --git a/examples/fabric-sync/README.md b/examples/fabric-sync/README.md
index fd943e461f108c..bf4a3b0627cfbc 100644
--- a/examples/fabric-sync/README.md
+++ b/examples/fabric-sync/README.md
@@ -92,13 +92,13 @@ defined:
     Pull Docker Images
 
     ```sh
-    docker pull ghcr.io/project-chip/chip-build-crosscompile:90
+    docker pull ghcr.io/project-chip/chip-build-crosscompile:92
     ```
 
     Run docker
 
     ```sh
-    docker run -it -v ~/connectedhomeip:/var/connectedhomeip ghcr.io/project-chip/chip-build-crosscompile:90 /bin/bash
+    docker run -it -v ~/connectedhomeip:/var/connectedhomeip ghcr.io/project-chip/chip-build-crosscompile:92 /bin/bash
     ```
 
     Build
diff --git a/examples/light-switch-app/ameba/README.md b/examples/light-switch-app/ameba/README.md
index ea9304fe7ca4a9..a499d29528e2fd 100644
--- a/examples/light-switch-app/ameba/README.md
+++ b/examples/light-switch-app/ameba/README.md
@@ -26,11 +26,11 @@ The CHIP demo application is supported on
 
 -   Pull docker image:
 
-          $ docker pull ghcr.io/project-chip/chip-build-ameba:90
+          $ docker pull ghcr.io/project-chip/chip-build-ameba:92
 
 -   Run docker container:
 
-          $ docker run -it -v ${CHIP_DIR}:/root/chip ghcr.io/project-chip/chip-build-ameba:90
+          $ docker run -it -v ${CHIP_DIR}:/root/chip ghcr.io/project-chip/chip-build-ameba:92
 
 -   Setup build environment:
 
diff --git a/examples/lighting-app/ameba/README.md b/examples/lighting-app/ameba/README.md
index e91aec075b50c0..ea6092575df808 100644
--- a/examples/lighting-app/ameba/README.md
+++ b/examples/lighting-app/ameba/README.md
@@ -23,11 +23,11 @@ The CHIP demo application is supported on
 
 -   Pull docker image:
 
-          $ docker pull ghcr.io/project-chip/chip-build-ameba:90
+          $ docker pull ghcr.io/project-chip/chip-build-ameba:92
 
 -   Run docker container:
 
-          $ docker run -it -v ${CHIP_DIR}:/root/chip ghcr.io/project-chip/chip-build-ameba:90
+          $ docker run -it -v ${CHIP_DIR}:/root/chip ghcr.io/project-chip/chip-build-ameba:92
 
 -   Setup build environment:
 
diff --git a/examples/ota-requestor-app/ameba/README.md b/examples/ota-requestor-app/ameba/README.md
index e748f41dc9b090..1f69815a780e0a 100644
--- a/examples/ota-requestor-app/ameba/README.md
+++ b/examples/ota-requestor-app/ameba/README.md
@@ -6,11 +6,11 @@ A prototype application that demonstrates OTA Requestor capabilities.
 
 -   Pull docker image:
 
-          $ docker pull ghcr.io/project-chip/chip-build-ameba:90
+          $ docker pull ghcr.io/project-chip/chip-build-ameba:92
 
 -   Run docker container:
 
-          $ docker run -it -v ${CHIP_DIR}:/root/chip ghcr.io/project-chip/chip-build-ameba:90
+          $ docker run -it -v ${CHIP_DIR}:/root/chip ghcr.io/project-chip/chip-build-ameba:92
 
 -   Setup build environment:
 
diff --git a/examples/pigweed-app/ameba/README.md b/examples/pigweed-app/ameba/README.md
index 136a37a14caf41..66d7564c2c1420 100644
--- a/examples/pigweed-app/ameba/README.md
+++ b/examples/pigweed-app/ameba/README.md
@@ -31,11 +31,11 @@ following features are available:
 
 -   Pull docker image:
 
-          $ docker pull ghcr.io/project-chip/chip-build-ameba:90
+          $ docker pull ghcr.io/project-chip/chip-build-ameba:92
 
 -   Run docker container:
 
-          $ docker run -it -v ${CHIP_DIR}:/root/chip ghcr.io/project-chip/chip-build-ameba:90
+          $ docker run -it -v ${CHIP_DIR}:/root/chip ghcr.io/project-chip/chip-build-ameba:92
 
 -   Setup build environment:
 
diff --git a/examples/platform/telink/common.cmake b/examples/platform/telink/common.cmake
index 80050c81b3b641..b8da9a0dc876c8 100644
--- a/examples/platform/telink/common.cmake
+++ b/examples/platform/telink/common.cmake
@@ -72,7 +72,7 @@ if(NOT EXISTS "${BOOT_CONF_OVERLAY_FILE}")
   message(FATAL_ERROR "${BOOT_CONF_OVERLAY_FILE} doesn't exist")
 endif()
 
-if(${CONFIG_USB_TELINK_B9X} MATCHES y)
+if((${CONFIG_USB_TELINK_B9X} MATCHES y) OR (${CONFIG_USB_TELINK_TLX} MATCHES y))
   set(BOOT_USB_CONF_OVERLAY_FILE "${CHIP_ROOT}/config/telink/app/bootloader_usb.conf")
   if(NOT EXISTS "${BOOT_USB_CONF_OVERLAY_FILE}")
     message(FATAL_ERROR "${BOOT_USB_CONF_OVERLAY_FILE} doesn't exist")
diff --git a/examples/platform/telink/project_include/OpenThreadConfig.h b/examples/platform/telink/project_include/OpenThreadConfig.h
index eabe238820ae7f..0e23617e28e21b 100644
--- a/examples/platform/telink/project_include/OpenThreadConfig.h
+++ b/examples/platform/telink/project_include/OpenThreadConfig.h
@@ -27,12 +27,17 @@
 
 /* Number of message buffers reduced to save RAM */
 #undef OPENTHREAD_CONFIG_NUM_MESSAGE_BUFFERS
-#if CONFIG_PM
+#if CONFIG_PM || CONFIG_SOC_RISCV_TELINK_TL321X
 #define OPENTHREAD_CONFIG_NUM_MESSAGE_BUFFERS 22
 #else
 #define OPENTHREAD_CONFIG_NUM_MESSAGE_BUFFERS 44
 #endif
 
+#if CONFIG_SOC_RISCV_TELINK_TL321X
+#undef OPENTHREAD_CONFIG_MLE_MAX_CHILDREN
+#define OPENTHREAD_CONFIG_MLE_MAX_CHILDREN 5
+#endif
+
 #define OPENTHREAD_CONFIG_LOG_OUTPUT OPENTHREAD_CONFIG_LOG_OUTPUT_DEBUG_UART
 
 #undef OPENTHREAD_CONFIG_LOG_LEVEL
diff --git a/integrations/cloudbuild/chef.yaml b/integrations/cloudbuild/chef.yaml
index 1eafb85580a072..eba19f43d5f315 100644
--- a/integrations/cloudbuild/chef.yaml
+++ b/integrations/cloudbuild/chef.yaml
@@ -1,5 +1,5 @@
 steps:
-    - name: "ghcr.io/project-chip/chip-build-vscode:90"
+    - name: "ghcr.io/project-chip/chip-build-vscode:92"
       entrypoint: "bash"
       args:
           - "-c"
@@ -7,7 +7,7 @@ steps:
               git config --global --add safe.directory "*"
               python scripts/checkout_submodules.py --shallow --recursive --platform esp32 nrfconnect silabs linux android 
       id: Submodules
-    - name: "ghcr.io/project-chip/chip-build-vscode:90"
+    - name: "ghcr.io/project-chip/chip-build-vscode:92"
       # NOTE: silabs boostrap is NOT done with the rest as it requests a conflicting
       #       jinja2 version (asks for 3.1.3 when constraints.txt asks for 3.0.3)
       env:
@@ -23,7 +23,7 @@ steps:
           - name: pwenv
             path: /pwenv
       timeout: 900s
-    - name: "ghcr.io/project-chip/chip-build-vscode:90"
+    - name: "ghcr.io/project-chip/chip-build-vscode:92"
       env:
           - PW_ENVIRONMENT_ROOT=/pwenv
       args:
@@ -38,7 +38,7 @@ steps:
           - name: pwenv
             path: /pwenv
 
-    - name: "ghcr.io/project-chip/chip-build-vscode:90"
+    - name: "ghcr.io/project-chip/chip-build-vscode:92"
       env:
           - PW_ENVIRONMENT_ROOT=/pwenv
       args:
diff --git a/integrations/cloudbuild/smoke-test.yaml b/integrations/cloudbuild/smoke-test.yaml
index f1ca12766f0d29..22b3d377d8c83a 100644
--- a/integrations/cloudbuild/smoke-test.yaml
+++ b/integrations/cloudbuild/smoke-test.yaml
@@ -1,5 +1,5 @@
 steps:
-    - name: "ghcr.io/project-chip/chip-build-vscode:90"
+    - name: "ghcr.io/project-chip/chip-build-vscode:92"
       entrypoint: "bash"
       args:
           - "-c"
@@ -7,7 +7,7 @@ steps:
               git config --global --add safe.directory "*"
               python scripts/checkout_submodules.py --shallow --recursive --platform esp32 nrfconnect silabs linux android 
       id: Submodules
-    - name: "ghcr.io/project-chip/chip-build-vscode:90"
+    - name: "ghcr.io/project-chip/chip-build-vscode:92"
       # NOTE: silabs boostrap is NOT done with the rest as it requests a conflicting
       #       jinja2 version (asks for 3.1.3 when constraints.txt asks for 3.0.3)
       env:
@@ -24,7 +24,7 @@ steps:
             path: /pwenv
       timeout: 900s
 
-    - name: "ghcr.io/project-chip/chip-build-vscode:90"
+    - name: "ghcr.io/project-chip/chip-build-vscode:92"
       id: ESP32
       env:
           - PW_ENVIRONMENT_ROOT=/pwenv
@@ -45,7 +45,7 @@ steps:
       volumes:
           - name: pwenv
             path: /pwenv
-    - name: "ghcr.io/project-chip/chip-build-vscode:90"
+    - name: "ghcr.io/project-chip/chip-build-vscode:92"
       id: NRFConnect
       env:
           - PW_ENVIRONMENT_ROOT=/pwenv
@@ -66,7 +66,7 @@ steps:
           - name: pwenv
             path: /pwenv
 
-    - name: "ghcr.io/project-chip/chip-build-vscode:90"
+    - name: "ghcr.io/project-chip/chip-build-vscode:92"
       id: EFR32
       env:
           - PW_ENVIRONMENT_ROOT=/pwenv
@@ -88,7 +88,7 @@ steps:
           - name: pwenv
             path: /pwenv
 
-    - name: "ghcr.io/project-chip/chip-build-vscode:90"
+    - name: "ghcr.io/project-chip/chip-build-vscode:92"
       id: Linux
       env:
           - PW_ENVIRONMENT_ROOT=/pwenv
@@ -141,7 +141,7 @@ steps:
           - name: pwenv
             path: /pwenv
 
-    - name: "ghcr.io/project-chip/chip-build-vscode:90"
+    - name: "ghcr.io/project-chip/chip-build-vscode:92"
       id: Android
       env:
           - PW_ENVIRONMENT_ROOT=/pwenv
diff --git a/scripts/build/build/targets.py b/scripts/build/build/targets.py
index 0f80756ec49208..0bb25ef9a06b75 100755
--- a/scripts/build/build/targets.py
+++ b/scripts/build/build/targets.py
@@ -770,6 +770,7 @@ def BuildTelinkTarget():
         TargetPart('tlsr9528a_retention', board=TelinkBoard.TLSR9528A_RETENTION),
         TargetPart('tlsr9258a', board=TelinkBoard.TLSR9258A),
         TargetPart('tlsr9258a_retention', board=TelinkBoard.TLSR9258A_RETENTION),
+        TargetPart('tl3218x', board=TelinkBoard.TL3218X),
     ])
 
     target.AppendFixedTargets([
diff --git a/scripts/build/builders/telink.py b/scripts/build/builders/telink.py
index a4943007161f53..bf2bb1900a5842 100644
--- a/scripts/build/builders/telink.py
+++ b/scripts/build/builders/telink.py
@@ -121,6 +121,7 @@ class TelinkBoard(Enum):
     TLSR9528A_RETENTION = auto()
     TLSR9258A = auto()
     TLSR9258A_RETENTION = auto()
+    TL3218X = auto()
 
     def GnArgName(self):
         if self == TelinkBoard.TLRS9118BDK40D:
@@ -135,6 +136,8 @@ def GnArgName(self):
             return 'tlsr9258a'
         elif self == TelinkBoard.TLSR9258A_RETENTION:
             return 'tlsr9258a_retention'
+        elif self == TelinkBoard.TL3218X:
+            return 'tl3218x'
         else:
             raise Exception('Unknown board type: %r' % self)
 
diff --git a/scripts/build/testdata/all_targets_linux_x64.txt b/scripts/build/testdata/all_targets_linux_x64.txt
index c473de1aa1d814..f3330ffc3fe090 100644
--- a/scripts/build/testdata/all_targets_linux_x64.txt
+++ b/scripts/build/testdata/all_targets_linux_x64.txt
@@ -22,5 +22,5 @@ nuttx-x64-light
 qpg-qpg6105-{lock,light,shell,persistent-storage,light-switch,thermostat}[-updateimage]
 stm32-stm32wb5mm-dk-light
 tizen-arm-{all-clusters,chip-tool,light,tests}[-no-ble][-no-thread][-no-wifi][-asan][-ubsan][-coverage][-with-ui]
-telink-{tlsr9118bdk40d,tlsr9518adk80d,tlsr9528a,tlsr9528a_retention,tlsr9258a,tlsr9258a_retention}-{air-quality-sensor,all-clusters,all-clusters-minimal,bridge,contact-sensor,light,light-switch,lock,ota-requestor,pump,pump-controller,shell,smoke-co-alarm,temperature-measurement,thermostat,window-covering}[-ota][-dfu][-shell][-rpc][-factory-data][-4mb][-mars][-usb][-compress-lzma][-thread-analyzer]
+telink-{tlsr9118bdk40d,tlsr9518adk80d,tlsr9528a,tlsr9528a_retention,tlsr9258a,tlsr9258a_retention,tl3218x}-{air-quality-sensor,all-clusters,all-clusters-minimal,bridge,contact-sensor,light,light-switch,lock,ota-requestor,pump,pump-controller,shell,smoke-co-alarm,temperature-measurement,thermostat,window-covering}[-ota][-dfu][-shell][-rpc][-factory-data][-4mb][-mars][-usb][-compress-lzma][-thread-analyzer]
 openiotsdk-{shell,lock}[-mbedtls][-psa]
diff --git a/src/platform/telink/CHIPDevicePlatformConfig.h b/src/platform/telink/CHIPDevicePlatformConfig.h
index 989b9b2aaf3705..3123d1464e3081 100644
--- a/src/platform/telink/CHIPDevicePlatformConfig.h
+++ b/src/platform/telink/CHIPDevicePlatformConfig.h
@@ -108,6 +108,12 @@
 #define CHIP_DEVICE_CONFIG_ENABLE_ETHERNET 0
 #endif // CHIP_DEVICE_CONFIG_ENABLE_ETHERNET
 
+#ifdef CONFIG_SOC_RISCV_TELINK_TL321X
+#define CHIP_DEVICE_CONFIG_EVENT_LOGGING_CRIT_BUFFER_SIZE (256)
+#define CHIP_DEVICE_CONFIG_EVENT_LOGGING_INFO_BUFFER_SIZE (256)
+#define CHIP_DEVICE_CONFIG_EVENT_LOGGING_DEBUG_BUFFER_SIZE (256)
+#endif
+
 #ifdef CONFIG_BT
 #define CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE CONFIG_BT
 #else
diff --git a/src/platform/telink/CHIPPlatformConfig.h b/src/platform/telink/CHIPPlatformConfig.h
index edd68b95380a84..27b2104c2480c6 100644
--- a/src/platform/telink/CHIPPlatformConfig.h
+++ b/src/platform/telink/CHIPPlatformConfig.h
@@ -62,7 +62,19 @@
 #define CHIP_CONFIG_BDX_MAX_NUM_TRANSFERS 1
 #endif // CHIP_CONFIG_BDX_MAX_NUM_TRANSFERS
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_SOC_RISCV_TELINK_TL321X
+
+#ifndef CHIP_CONFIG_MAX_GROUP_DATA_PEERS
+#define CHIP_CONFIG_MAX_GROUP_DATA_PEERS 5
+#endif // CHIP_CONFIG_MAX_GROUP_DATA_PEERS
+
+#ifndef CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_MAX_ENTRIES_PER_FABRIC
+#define CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_MAX_ENTRIES_PER_FABRIC 4
+#endif // CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_MAX_ENTRIES_PER_FABRIC
+
+#endif // CONFIG_SOC_RISCV_TELINK_TL321X
+
+#if defined CONFIG_PM || defined CONFIG_SOC_RISCV_TELINK_TL321X
 
 #ifndef CHIP_CONFIG_MAX_GROUP_DATA_PEERS
 #define CHIP_CONFIG_MAX_GROUP_DATA_PEERS 7
@@ -96,7 +108,7 @@
 #define CHIP_CONFIG_DEVICE_MAX_ACTIVE_DEVICES 2
 #endif // CHIP_CONFIG_DEVICE_MAX_ACTIVE_DEVICES
 
-#endif // CONFIG_PM
+#endif // CONFIG_PM || CONFIG_SOC_RISCV_TELINK_TL321X
 
 #ifndef CHIP_CONFIG_MAX_FABRICS
 #define CHIP_CONFIG_MAX_FABRICS 5
diff --git a/src/platform/telink/SystemPlatformConfig.h b/src/platform/telink/SystemPlatformConfig.h
index 5a7b56e9afb5fd..462260e6d1d0bd 100644
--- a/src/platform/telink/SystemPlatformConfig.h
+++ b/src/platform/telink/SystemPlatformConfig.h
@@ -44,11 +44,18 @@ struct ChipDeviceEvent;
 #define CHIP_SYSTEM_CONFIG_PLATFORM_PROVIDES_TIME 1
 #endif // CHIP_SYSTEM_CONFIG_USE_POSIX_TIME_FUNCTS
 
+#ifdef CONFIG_SOC_RISCV_TELINK_TL321X
+#define CHIP_SYSTEM_PACKETBUFFER_FROM_CHIP_HEAP 1
+#define CHIP_SYSTEM_PACKETBUFFER_FROM_CHIP_POOL 0
+#define CHIP_SYSTEM_CONFIG_POOL_USE_HEAP 1
+#define CHIP_SYSTEM_CONFIG_PACKETBUFFER_CAPACITY_MAX 1280
+#endif
+
 #define CHIP_SYSTEM_CONFIG_USE_LWIP 0
 #define CHIP_SYSTEM_CONFIG_USE_SOCKETS 1
 
 // Reduce packet buffer pool size (default 15) to reduce ram consumption
-#ifdef CONFIG_PM
+#if defined CONFIG_PM || defined CONFIG_SOC_RISCV_TELINK_TL321X
 #define CHIP_SYSTEM_CONFIG_PACKETBUFFER_POOL_SIZE 0
 #else
 #define CHIP_SYSTEM_CONFIG_PACKETBUFFER_POOL_SIZE 8
diff --git a/src/platform/telink/tl3218x.overlay b/src/platform/telink/tl3218x.overlay
new file mode 100644
index 00000000000000..4c74bb14ea216c
--- /dev/null
+++ b/src/platform/telink/tl3218x.overlay
@@ -0,0 +1,61 @@
+/ {
+	/* Short TL_Key3 (J6 pin 21) to ground */
+	key_pool {
+		compatible = "gpio-keys";
+
+		inp {
+			gpios = <&gpiob 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>,
+					<&gpiob 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+	};
+
+	key_matrix {
+		compatible = "gpio-keys";
+
+		col {
+			gpios = <&gpiob 6 GPIO_ACTIVE_HIGH>,
+					<&gpiob 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		row {
+			gpios = <&gpiob 3 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>,
+					<&gpiob 5 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>;
+		};
+	};
+
+	led_pool {
+		compatible = "gpio-leds";
+
+		out {
+			gpios = <&gpiod 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pwm_pool {
+		compatible = "pwm-leds";
+		out {
+			pwms = <&pwm0 2 PWM_MSEC(20) PWM_POLARITY_NORMAL>,
+					<&pwm0 0 PWM_MSEC(20) PWM_POLARITY_NORMAL>,
+					<&pwm0 1 PWM_MSEC(20) PWM_POLARITY_NORMAL>;
+		};
+	};
+};
+
+&pwm0 {
+	/* On board RGB LEDs */
+	pinctrl-ch0 = <&pwm_ch0_pb1_default>;
+	pinctrl-ch2 = <&pwm_ch1_pb2_default>;
+	pinctrl-ch1 = <&pwm_ch2_pb0_default>;
+};
+
+&pinctrl {
+	pwm_ch0_pb1_default: pwm_ch0_pb1_default {
+		pinmux = <TLX_PINMUX_SET(TLX_PORT_B, TLX_PIN_1, TL321X_FUNC_PWM0)>;
+	};
+	pwm_ch1_pb2_default: pwm_ch1_pb2_default {
+		pinmux = <TLX_PINMUX_SET(TLX_PORT_B, TLX_PIN_2, TL321X_FUNC_PWM1)>;
+	};
+	pwm_ch2_pb0_default: pwm_ch2_pb0_default {
+		pinmux = <TLX_PINMUX_SET(TLX_PORT_B, TLX_PIN_0, TL321X_FUNC_PWM2)>;
+	};
+};
diff --git a/src/platform/telink/tl3218x_2m_flash.overlay b/src/platform/telink/tl3218x_2m_flash.overlay
new file mode 100644
index 00000000000000..53114e6ac6054d
--- /dev/null
+++ b/src/platform/telink/tl3218x_2m_flash.overlay
@@ -0,0 +1,39 @@
+&flash {
+	reg = <0x20000000 0x200000>;
+
+	/delete-node/ partitions;
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		boot_partition: partition@0 {
+			label = "mcuboot";
+			reg = <0x00000000 0x13000>;
+		};
+		slot0_partition: partition@13000 {
+			label = "image-0";
+			reg = <0x13000 0xef000>;
+		};
+		factory_partition: partition@102000 {
+			label = "factory-data";
+			reg = <0x102000 0x800>;
+		};
+		factory_rfu_partition: partition@102800 {
+			label = "factory-data-rfu";
+			reg = <0x102800 0x800>;
+		};
+		storage_partition: partition@103000 {
+			label = "storage";
+			reg = <0x103000 0xc000>;
+		};
+		slot1_partition: partition@10f000 {
+			label = "image-1";
+			reg = <0x10f000 0xef000>;
+		};
+		vendor_partition: partition@1fe000 {
+			label = "vendor-data";
+			reg = <0x1fe000 0x2000>;
+		};
+	};
+};