diff --git a/examples/energy-management-app/esp32/.gitignore b/examples/energy-management-app/esp32/.gitignore
new file mode 100644
index 00000000000000..601ff1b8e9e01e
--- /dev/null
+++ b/examples/energy-management-app/esp32/.gitignore
@@ -0,0 +1,4 @@
+/build/
+/sdkconfig
+/sdkconfig.old
+main/insights_auth_key.txt
diff --git a/examples/energy-management-app/esp32/CMakeLists.txt b/examples/energy-management-app/esp32/CMakeLists.txt
new file mode 100644
index 00000000000000..c9944ab9a39e46
--- /dev/null
+++ b/examples/energy-management-app/esp32/CMakeLists.txt
@@ -0,0 +1,87 @@
+#
+#    Copyright (c) 2021-2023 Project CHIP Authors
+#    All rights reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License");
+#    you may not use this file except in compliance with the License.
+#    You may obtain a copy of the License at
+#
+#        http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS,
+#    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#    See the License for the specific language governing permissions and
+#    limitations under the License.
+
+# The following lines of boilerplate have to be in your project's
+# CMakeLists in this exact order for cmake to work correctly
+cmake_minimum_required(VERSION 3.5)
+
+set(PROJECT_VER "v1.0")
+set(PROJECT_VER_NUMBER 1)
+
+include($ENV{IDF_PATH}/tools/cmake/project.cmake)
+include(${CMAKE_CURRENT_LIST_DIR}/third_party/connectedhomeip/examples/common/cmake/idf_flashing.cmake)
+
+set(EXTRA_COMPONENT_DIRS
+    "${CMAKE_CURRENT_LIST_DIR}/third_party/connectedhomeip/config/esp32/components"
+    "${CMAKE_CURRENT_LIST_DIR}/third_party/connectedhomeip/examples/common"
+)
+
+if(${IDF_TARGET} STREQUAL "esp32")
+    list(APPEND EXTRA_COMPONENT_DIRS "${CMAKE_CURRENT_LIST_DIR}/third_party/connectedhomeip/examples/common/m5stack-tft/repo/components")
+endif()
+
+
+project(chip-energy-management-app)
+
+# WARNING: This is just an example for using key for decrypting the encrypted OTA image
+# Please do not use it as is.
+if(CONFIG_ENABLE_ENCRYPTED_OTA)
+    target_add_binary_data(chip-energy-management-app.elf "esp_image_encryption_key.pem" TEXT)
+endif()
+
+# C++17 is required for RPC build.
+idf_build_set_property(CXX_COMPILE_OPTIONS "-std=gnu++17;-Os;-DCHIP_HAVE_CONFIG_H" APPEND)
+idf_build_set_property(C_COMPILE_OPTIONS "-Os" APPEND)
+# For the C3, project_include.cmake sets -Wno-format, but does not clear various
+# flags that depend on -Wformat
+idf_build_set_property(COMPILE_OPTIONS "-Wno-format-nonliteral;-Wno-format-security" APPEND)
+
+# -Wmaybe-uninitialized has too many false positives, including on std::optional
+# and chip::Optional.  Make it nonfatal.
+#
+# See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=80635
+idf_build_set_property(COMPILE_OPTIONS "-Wno-error=maybe-uninitialized" APPEND)
+
+#For the H2, -Werror=uninitialized will cause an error in "src/lib/support/LambdaBridge.h"
+idf_build_set_property(COMPILE_OPTIONS "-Wno-error=uninitialized" APPEND)
+
+flashing_script()
+
+if (CONFIG_ENABLE_PW_RPC)
+get_filename_component(CHIP_ROOT ./third_party/connectedhomeip REALPATH)
+include(third_party/connectedhomeip/third_party/pigweed/repo/pw_build/pigweed.cmake)
+include($ENV{PW_ROOT}/pw_assert/backend.cmake)
+include($ENV{PW_ROOT}/pw_log/backend.cmake)
+include($ENV{PW_ROOT}/pw_sys_io/backend.cmake)
+include($ENV{PW_ROOT}/pw_trace/backend.cmake)
+
+pw_set_module_config(pw_rpc_CONFIG pw_rpc.disable_global_mutex_config)
+
+pw_set_backend(pw_log pw_log_basic)
+pw_set_backend(pw_assert.check pw_assert_log.check_backend)
+pw_set_backend(pw_assert.assert pw_assert.assert_compatibility_backend)
+pw_set_backend(pw_sys_io pw_sys_io.esp32)
+pw_set_backend(pw_trace pw_trace_tokenized)
+
+add_subdirectory(third_party/connectedhomeip/third_party/pigweed/repo)
+add_subdirectory(third_party/connectedhomeip/third_party/nanopb/repo)
+add_subdirectory(third_party/connectedhomeip/examples/platform/esp32/pw_sys_io)
+
+get_target_property(_target_cxx_flags pw_build.cpp17._public_config INTERFACE_COMPILE_OPTIONS)
+list(REMOVE_ITEM _target_cxx_flags $<$<COMPILE_LANGUAGE:CXX>:-std=c++17>)
+list(APPEND _target_cxx_flags $<$<COMPILE_LANGUAGE:CXX>:-std=gnu++17>)
+set_target_properties(pw_build.cpp17._public_config PROPERTIES INTERFACE_COMPILE_OPTIONS "${_target_cxx_flags}")
+endif(CONFIG_ENABLE_PW_RPC)
diff --git a/examples/energy-management-app/esp32/README.md b/examples/energy-management-app/esp32/README.md
new file mode 100644
index 00000000000000..c2fb2bc7a1f63c
--- /dev/null
+++ b/examples/energy-management-app/esp32/README.md
@@ -0,0 +1,49 @@
+# Matter ESP32 Energy Management Example
+
+This example demonstrates the Matter Electric Vehicle Supply Equipment
+application on ESP platforms.
+
+Please
+[setup ESP-IDF and CHIP Environment](../../../docs/guides/esp32/setup_idf_chip.md)
+and refer
+[building and commissioning](../../../docs/guides/esp32/build_app_and_commission.md)
+guides to get started.
+
+### Enabling ESP-Insights:
+
+-   Before building the app, enable the option: ESP_INSIGHTS_ENABLED through
+    menuconfig.
+
+-   Create a file named insights_auth_key.txt in the main directory of the
+    example.
+
+-   Follow the steps
+    present[here](https://github.com/espressif/esp-insights/blob/main/examples/README.md#set-up-esp-insights-account)
+    to set up an insights_account and the auth key created while setting it up
+    will be used in the example.
+
+-   Download the auth key and copy Auth Key to the example
+
+```
+cp /path/to/auth/key.txt path/to/connectedhomeip/examples/energy-management-app/esp32/main/insights_auth_key.txt
+```
+
+---
+
+-   [Cluster Control](#cluster-control)
+-   [Matter OTA guide](../../../docs/guides/esp32/ota.md)
+
+---
+
+### Cluster Control
+
+-   After successful commissioning, use the Energy Electric Vehicle Supply
+    Equipment cluster command to disable/enable charging and discharging.
+
+```
+        $./out/debug/chip-tool energyevse disable <NODE ID> 1
+```
+
+```
+        $ ./out/debug/chip-tool energyevse enable-charging 0xFFFFFFFF 6000 32000 <NODE ID> 1 --timedInteractionTimeoutMs <Time>
+```
diff --git a/examples/energy-management-app/esp32/main/CMakeLists.txt b/examples/energy-management-app/esp32/main/CMakeLists.txt
new file mode 100644
index 00000000000000..1c7f2a5b782948
--- /dev/null
+++ b/examples/energy-management-app/esp32/main/CMakeLists.txt
@@ -0,0 +1,247 @@
+#
+#    Copyright (c) 2021-2023 Project CHIP Authors
+#    All rights reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License");
+#    you may not use this file except in compliance with the License.
+#    You may obtain a copy of the License at
+#
+#        http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS,
+#    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#    See the License for the specific language governing permissions and
+#    limitations under the License.
+#
+# (Uses default behaviour of compiling all source files in directory, adding 'include' to include path.)
+
+set(PRIV_INCLUDE_DIRS_LIST
+                      "${APP_GEN_DIR}"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/examples/providers"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/examples/energy-management-app/energy-management-common/include"
+                      "${CMAKE_CURRENT_LIST_DIR}/include"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/examples/platform/esp32"
+)
+set(SRC_DIRS_LIST
+                      "${CMAKE_CURRENT_LIST_DIR}"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/zzz_generated/app-common/app-common/zap-generated/attributes"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/zzz_generated/app-common/app-common/zap-generated"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/examples/providers"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/examples/energy-management-app/energy-management-common/src"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/examples/platform/esp32/ota"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/examples/platform/esp32/common"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/examples/platform/esp32/shell_extension"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/server"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/util"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/reporting"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/access-control-server"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/administrator-commissioning-server"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/basic-information"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/bindings"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/descriptor"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/diagnostic-logs-server"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/ethernet-network-diagnostics-server"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/fixed-label-server"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/general-commissioning-server"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/general-diagnostics-server"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/identify-server"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/localization-configuration-server"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/time-format-localization-server"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/barrier-control-server"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/energy-evse-server"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/network-commissioning"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/occupancy-sensor-server"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/operational-credentials-server"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/ota-requestor"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/power-source-configuration-server"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/software-diagnostics-server"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/switch-server"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/thread-network-diagnostics-server"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/user-label-server"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/wifi-network-diagnostics-server"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/ota-requestor"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/groups-server"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/group-key-mgmt-server"
+)
+
+set(PRIV_REQUIRES_LIST chip QRCode bt led_strip app_update openthread driver nvs_flash spi_flash)
+
+if(${IDF_TARGET} STREQUAL "esp32")
+    list(APPEND PRIV_REQUIRES_LIST spidriver screen-framework)
+endif()
+
+
+if (CONFIG_ENABLE_PW_RPC)
+# Append additional directories for RPC build
+set(PRIV_INCLUDE_DIRS_LIST  "${PRIV_INCLUDE_DIRS_LIST}"
+                     "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/examples/platform/esp32/pw_sys_io/public"
+                     "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/examples/common"
+                     "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/examples/common/pigweed"
+                     "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/examples/common/pigweed/esp32"
+                     "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/lib/support"
+)
+
+if (${IDF_VERSION_MAJOR} LESS 5)
+    list(APPEND PRIV_INCLUDE_DIRS_LIST "${IDF_PATH}/components/freertos/include/freertos")
+else()
+    list(APPEND PRIV_INCLUDE_DIRS_LIST "${IDF_PATH}/components/freertos/FreeRTOS-Kernel/include/freertos")
+endif()
+
+set(SRC_DIRS_LIST  "${SRC_DIRS_LIST}"
+                     "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/examples/platform/esp32"
+                     "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/examples/common/pigweed"
+                     "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/examples/common/pigweed/esp32"
+)
+endif (CONFIG_ENABLE_PW_RPC)
+
+idf_component_register(PRIV_INCLUDE_DIRS ${PRIV_INCLUDE_DIRS_LIST}
+                       SRC_DIRS ${SRC_DIRS_LIST}
+                       PRIV_REQUIRES ${PRIV_REQUIRES_LIST})
+get_filename_component(CHIP_ROOT ${CMAKE_SOURCE_DIR}/third_party/connectedhomeip REALPATH)
+
+include("${CHIP_ROOT}/build/chip/esp32/esp32_codegen.cmake")
+
+chip_app_component_codegen("${CHIP_ROOT}/examples/energy-management-app/energy-management-common/energy-management-app.matter")
+chip_app_component_zapgen("${CHIP_ROOT}/examples/energy-management-app/energy-management-common/energy-management-app.zap")
+
+if (CONFIG_ENABLE_ESP_INSIGHTS_TRACE)
+    target_add_binary_data(${COMPONENT_TARGET} "insights_auth_key.txt" TEXT)
+endif()
+
+set_property(TARGET ${COMPONENT_LIB} PROPERTY CXX_STANDARD 17)
+target_compile_options(${COMPONENT_LIB} PRIVATE "-DCHIP_HAVE_CONFIG_H")
+target_compile_options(${COMPONENT_LIB} PUBLIC
+           "-DCHIP_ADDRESS_RESOLVE_IMPL_INCLUDE_HEADER=<lib/address_resolve/AddressResolve_DefaultImpl.h>"
+)
+
+if (CONFIG_ENABLE_PW_RPC)
+
+get_filename_component(CHIP_ROOT ${CMAKE_SOURCE_DIR}/third_party/connectedhomeip REALPATH)
+
+set(PIGWEED_ROOT "${CHIP_ROOT}/third_party/pigweed/repo")
+include(${PIGWEED_ROOT}/pw_build/pigweed.cmake)
+include(${PIGWEED_ROOT}/pw_protobuf_compiler/proto.cmake)
+set(dir_pw_third_party_nanopb "${CHIP_ROOT}/third_party/nanopb/repo" CACHE STRING "" FORCE)
+
+pw_proto_library(attributes_service
+  SOURCES
+    ${CHIP_ROOT}/examples/common/pigweed/protos/attributes_service.proto
+  INPUTS
+    ${CHIP_ROOT}/examples/common/pigweed/protos/attributes_service.options
+  PREFIX
+    attributes_service
+  STRIP_PREFIX
+    ${CHIP_ROOT}/examples/common/pigweed/protos
+  DEPS
+    pw_protobuf.common_proto
+)
+
+pw_proto_library(button_service
+  SOURCES
+    ${CHIP_ROOT}/examples/common/pigweed/protos/button_service.proto
+  PREFIX
+    button_service
+  STRIP_PREFIX
+    ${CHIP_ROOT}/examples/common/pigweed/protos
+  DEPS
+    pw_protobuf.common_proto
+)
+
+pw_proto_library(descriptor_service
+  SOURCES
+    ${CHIP_ROOT}/examples/common/pigweed/protos/descriptor_service.proto
+  PREFIX
+    descriptor_service
+  STRIP_PREFIX
+    ${CHIP_ROOT}/examples/common/pigweed/protos
+  DEPS
+    pw_protobuf.common_proto
+)
+
+pw_proto_library(device_service
+  SOURCES
+    ${CHIP_ROOT}/examples/common/pigweed/protos/device_service.proto
+  INPUTS
+    ${CHIP_ROOT}/examples/common/pigweed/protos/device_service.options
+  PREFIX
+    device_service
+  STRIP_PREFIX
+    ${CHIP_ROOT}/examples/common/pigweed/protos
+  DEPS
+    pw_protobuf.common_proto
+)
+
+pw_proto_library(lighting_service
+  SOURCES
+    ${CHIP_ROOT}/examples/common/pigweed/protos/lighting_service.proto
+  PREFIX
+    lighting_service
+  STRIP_PREFIX
+    ${CHIP_ROOT}/examples/common/pigweed/protos
+  DEPS
+    pw_protobuf.common_proto
+)
+
+pw_proto_library(locking_service
+  SOURCES
+    ${CHIP_ROOT}/examples/common/pigweed/protos/locking_service.proto
+  PREFIX
+    locking_service
+  STRIP_PREFIX
+    ${CHIP_ROOT}/examples/common/pigweed/protos
+  DEPS
+    pw_protobuf.common_proto
+)
+
+pw_proto_library(wifi_service
+  SOURCES
+    ${CHIP_ROOT}/examples/common/pigweed/protos/wifi_service.proto
+  INPUTS
+    ${CHIP_ROOT}/examples/common/pigweed/protos/wifi_service.options
+  PREFIX
+    wifi_service
+  DEPS
+    pw_protobuf.common_proto
+  STRIP_PREFIX
+    ${CHIP_ROOT}/examples/common/pigweed/protos
+)
+
+target_link_libraries(${COMPONENT_LIB} PUBLIC
+  attributes_service.nanopb_rpc
+  button_service.nanopb_rpc
+  descriptor_service.nanopb_rpc
+  device_service.nanopb_rpc
+  lighting_service.nanopb_rpc
+  locking_service.nanopb_rpc
+  wifi_service.nanopb_rpc
+  pw_checksum
+  pw_hdlc
+  pw_log
+  pw_rpc.server
+  pw_sys_io
+  pw_trace
+  pw_trace_tokenized
+  pw_trace_tokenized.trace_buffer
+  pw_trace_tokenized.rpc_service
+  pw_trace_tokenized.protos.nanopb_rpc
+)
+
+target_link_options(${COMPONENT_LIB}
+  PUBLIC
+    "-T${PIGWEED_ROOT}/pw_tokenizer/pw_tokenizer_linker_sections.ld"
+    "-L${PIGWEED_ROOT}/pw_tokenizer"
+)
+
+target_compile_options(${COMPONENT_LIB} PRIVATE
+                       "-DPW_RPC_ATTRIBUTE_SERVICE=1"
+                       "-DPW_RPC_BUTTON_SERVICE=1"
+                       "-DPW_RPC_DESCRIPTOR_SERVICE=1"
+                       "-DPW_RPC_DEVICE_SERVICE=1"
+                       "-DPW_RPC_LIGHTING_SERVICE=1"
+                       "-DPW_RPC_LOCKING_SERVICE=1"
+                       "-DPW_RPC_TRACING_SERVICE=1"
+                       "-DPW_RPC_WIFI_SERVICE=1"
+                       "-DPW_TRACE_BACKEND_SET=1")
+
+endif (CONFIG_ENABLE_PW_RPC)
diff --git a/examples/energy-management-app/esp32/main/DeviceCallbacks.cpp b/examples/energy-management-app/esp32/main/DeviceCallbacks.cpp
new file mode 100644
index 00000000000000..46f2dccc348663
--- /dev/null
+++ b/examples/energy-management-app/esp32/main/DeviceCallbacks.cpp
@@ -0,0 +1,42 @@
+/*
+ *
+ *    Copyright (c) 2021-2023 Project CHIP Authors
+ *    All rights reserved.
+ *
+ *    Licensed under the Apache License, Version 2.0 (the "License");
+ *    you may not use this file except in compliance with the License.
+ *    You may obtain a copy of the License at
+ *
+ *        http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *    Unless required by applicable law or agreed to in writing, software
+ *    distributed under the License is distributed on an "AS IS" BASIS,
+ *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *    See the License for the specific language governing permissions and
+ *    limitations under the License.
+ */
+#include "DeviceCallbacks.h"
+
+#include <app/util/util.h>
+
+#include <app-common/zap-generated/attributes/Accessors.h>
+#include <app-common/zap-generated/ids/Attributes.h>
+#include <app-common/zap-generated/ids/Clusters.h>
+#include <app/ConcreteAttributePath.h>
+#include <lib/support/logging/CHIPLogging.h>
+
+static const char * TAG = "energy-management-app-callbacks";
+
+using namespace chip;
+using namespace chip::Inet;
+using namespace chip::System;
+using namespace chip::app::Clusters;
+
+void AppDeviceCallbacks::PostAttributeChangeCallback(EndpointId endpointId, ClusterId clusterId, AttributeId attributeId,
+                                                     uint8_t type, uint16_t size, uint8_t * value)
+{
+    ESP_LOGI(TAG, "PostAttributeChangeCallback - Cluster ID: '0x%" PRIx32 "', EndPoint ID: '0x%x', Attribute ID: '0x%" PRIx32 "'",
+             clusterId, endpointId, attributeId);
+
+    ESP_LOGI(TAG, "Current free heap: %u\n", static_cast<unsigned int>(heap_caps_get_free_size(MALLOC_CAP_8BIT)));
+}
diff --git a/examples/energy-management-app/esp32/main/Kconfig.projbuild b/examples/energy-management-app/esp32/main/Kconfig.projbuild
new file mode 100644
index 00000000000000..d994865b7aaee4
--- /dev/null
+++ b/examples/energy-management-app/esp32/main/Kconfig.projbuild
@@ -0,0 +1,187 @@
+#
+#    Copyright (c) 2021-2023 Project CHIP Authors
+#    All rights reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License");
+#    you may not use this file except in compliance with the License.
+#    You may obtain a copy of the License at
+#
+#        http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS,
+#    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#    See the License for the specific language governing permissions and
+#    limitations under the License.
+#
+#    Description:
+#      Configuration options CHIP ESP32 demo application.
+#
+
+menu "Demo"
+
+    choice
+        prompt "Device Type"
+        default DEVICE_TYPE_ESP32_DEVKITC if IDF_TARGET_ESP32
+        default DEVICE_TYPE_ESP32_C3_DEVKITM if IDF_TARGET_ESP32C3
+        default DEVICE_TYPE_ESP32_S3_DEVKITM if IDF_TARGET_ESP32S3
+        default DEVICE_TYPE_ESP32_C2_DEVKITM if IDF_TARGET_ESP32C2
+        default DEVICE_TYPE_ESP32_C6_DEVKITC if IDF_TARGET_ESP32C6
+        default DEVICE_TYPE_ESP32_H2_DEVKITC if IDF_TARGET_ESP32H2
+        help
+            Specifies the type of ESP32 device.
+
+            Note that the "ESP32-DevKitC" choice is compatible with a number of clone devices
+            available from third-party manufacturers.
+
+        config DEVICE_TYPE_ESP32_DEVKITC
+            bool "ESP32-DevKitC"
+            depends on IDF_TARGET_ESP32
+        config DEVICE_TYPE_ESP32_WROVER_KIT
+            bool "ESP32-WROVER-KIT_V4.1"
+            depends on IDF_TARGET_ESP32
+        config DEVICE_TYPE_M5STACK
+            bool "M5Stack"
+            depends on IDF_TARGET_ESP32
+        config DEVICE_TYPE_ESP32_C3_DEVKITM
+            bool "ESP32C3-DevKitM"
+            depends on IDF_TARGET_ESP32C3
+        config DEVICE_TYPE_ESP32_S3_DEVKITM
+            bool "ESP32S3-DevKitM"
+            depends on IDF_TARGET_ESP32S3
+        config DEVICE_TYPE_ESP32H2_DEVKITC
+            bool "ESP32H2-DevKitC"
+            depends on IDF_TARGET_ESP32H2
+        config DEVICE_TYPE_ESP32_C2_DEVKITM
+            bool "ESP32C2-DevKitM"
+            depends on IDF_TARGET_ESP32C2
+        config DEVICE_TYPE_ESP32_C6_DEVKITC
+            bool "ESP32C6-DevKitC"
+            depends on IDF_TARGET_ESP32C6
+    endchoice
+
+    config CHIP_PROJECT_CONFIG
+        string "CHIP Project Configuration file"
+        default "main/include/CHIPProjectConfig.h"
+
+    choice LED_TYPE
+        prompt "LED type"
+        default LED_TYPE_RMT if DEVICE_TYPE_ESP32_C3_DEVKITM || DEVICE_TYPE_ESP32_S3_DEVKITM || DEVICE_TYPE_ESP32H2_DEVKITC || DEVICE_TYPE_ESP32_C6_DEVKITC
+        default LED_TYPE_GPIO
+        help
+            Defines the default LED type used in the example
+
+        config LED_TYPE_GPIO
+            bool "GPIO"
+        config LED_TYPE_RMT
+            bool "RMT - Addressable LED"
+    endchoice
+
+    config LED_RMT_CHANNEL
+        depends on LED_TYPE_RMT
+        int "RMT Channel"
+        range 0 7
+        default 0
+        help
+            Set the RMT peripheral channel.
+            ESP32 RMT channel from 0 to 7
+            ESP32-S3 RMT channel from 0 to 3
+            ESP32-C3 RMT channel from 0 to 1
+
+    config LED_GPIO
+        int "LED GPIO number"
+        range 0 48
+        default 26 if DEVICE_TYPE_ESP32_WROVER_KIT
+        default 8 if DEVICE_TYPE_ESP32_C3_DEVKITM || DEVICE_TYPE_ESP32H2_DEVKITC || DEVICE_TYPE_ESP32_C2_DEVKITM || DEVICE_TYPE_ESP32_C6_DEVKITC
+        default 48 if DEVICE_TYPE_ESP32_S3_DEVKITM
+        default 5 if DEVICE_TYPE_M5STACK
+        default 5
+        help
+            GPIO number (IOxx) to blink on and off or the RMT signal for the addressable LED.
+
+    choice
+      prompt "Rendezvous Mode"
+      default RENDEZVOUS_MODE_BLE
+      help
+          Specifies the Rendezvous mode of the peripheral.
+
+      config RENDEZVOUS_MODE_WIFI
+          bool "Wi-Fi"
+      config RENDEZVOUS_MODE_BLE
+          bool "BLE"
+      config RENDEZVOUS_MODE_THREAD
+          bool "Thread"
+      config RENDEZVOUS_MODE_ETHERNET
+          bool "Ethernet"
+    endchoice
+
+    # NOTE: This config is not displayed as a input in the Kconfig menu, as its value is
+    # entirely derived from the Device Type choice.  However the CONFIG_EXAMPLE_DISPLAY_TYPE
+    # define that is produced is needed to configure the TFT library correctly.
+    config TFT_PREDEFINED_DISPLAY_TYPE
+        int
+        range 0 5
+        default 0 if DEVICE_TYPE_ESP32_DEVKITC
+        default 0 if DEVICE_TYPE_ESP32_C3_DEVKITM || DEVICE_TYPE_ESP32_C2_DEVKITM || DEVICE_TYPE_ESP32H2_DEVKITC || DEVICE_TYPE_ESP32_C6_DEVKITC
+        default 3 if DEVICE_TYPE_M5STACK
+        default 4 if DEVICE_TYPE_ESP32_WROVER_KIT
+
+    config HAVE_DISPLAY
+        bool
+        default y if DEVICE_TYPE_M5STACK || DEVICE_TYPE_ESP32_WROVER_KIT
+        default n if !(DEVICE_TYPE_M5STACK || DEVICE_TYPE_ESP32_WROVER_KIT)
+
+    config RENDEZVOUS_MODE
+       int
+       range 0 8
+       default 1 if RENDEZVOUS_MODE_WIFI
+       default 2 if RENDEZVOUS_MODE_BLE
+       default 4 if RENDEZVOUS_MODE_THREAD
+       default 8 if RENDEZVOUS_MODE_ETHERNET
+
+    config DISPLAY_AUTO_OFF
+        bool "Automatically turn off the M5Stack's Display after a few seconds"
+        default "y"
+        depends on DEVICE_TYPE_M5STACK
+        help
+            To reduce wear and heat the M5Stack's Display is automatically switched off after a few seconds
+
+endmenu
+
+menu "PW RPC Debug channel"
+depends on ENABLE_PW_RPC
+    config EXAMPLE_UART_PORT_NUM
+        int "UART port number"
+        range 0 2 if IDF_TARGET_ESP32
+        range 0 1 if IDF_TARGET_ESP32C3
+        default 0
+        help
+            UART communication port number for the example.
+            See UART documentation for available port numbers.
+
+    config EXAMPLE_UART_BAUD_RATE
+        int "UART communication speed"
+        range 1200 115200
+        default 115200
+        help
+            UART communication speed for Modbus example.
+
+    config EXAMPLE_UART_RXD
+        int "UART RXD pin number"
+        range 0 34 if IDF_TARGET_ESP32
+        range 0 19 if IDF_TARGET_ESP32C3
+        default 5
+        help
+            GPIO number for UART RX pin. See UART documentation for more information
+            about available pin numbers for UART.
+
+    config EXAMPLE_UART_TXD
+        int "UART TXD pin number"
+        range 0 34 if IDF_TARGET_ESP32
+        range 0 19 if IDF_TARGET_ESP32C3
+        default 4
+        help
+            GPIO number for UART TX pin. See UART documentation for more information
+            about available pin numbers for UART.
+
+endmenu
diff --git a/examples/energy-management-app/esp32/main/idf_component.yml b/examples/energy-management-app/esp32/main/idf_component.yml
new file mode 100644
index 00000000000000..1c539b8eb57668
--- /dev/null
+++ b/examples/energy-management-app/esp32/main/idf_component.yml
@@ -0,0 +1,2 @@
+dependencies:
+    espressif/led_strip: "^1.0.0-alpha"
diff --git a/examples/energy-management-app/esp32/main/include/CHIPProjectConfig.h b/examples/energy-management-app/esp32/main/include/CHIPProjectConfig.h
new file mode 100644
index 00000000000000..559895608a08d0
--- /dev/null
+++ b/examples/energy-management-app/esp32/main/include/CHIPProjectConfig.h
@@ -0,0 +1,47 @@
+/*
+ *
+ *    Copyright (c) 2023 Project CHIP Authors
+ *    All rights reserved.
+ *
+ *    Licensed under the Apache License, Version 2.0 (the "License");
+ *    you may not use this file except in compliance with the License.
+ *    You may obtain a copy of the License at
+ *
+ *        http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *    Unless required by applicable law or agreed to in writing, software
+ *    distributed under the License is distributed on an "AS IS" BASIS,
+ *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *    See the License for the specific language governing permissions and
+ *    limitations under the License.
+ */
+
+/**
+ *    @file
+ *          Example project configuration file for CHIP.
+ *
+ *          This is a place to put application or project-specific overrides
+ *          to the default configuration values for general CHIP features.
+ *
+ */
+
+#pragma once
+
+/**
+ *  @def CHIP_CONFIG_MAX_FABRICS
+ *
+ *  @brief
+ *    Maximum number of fabrics the device can participate in.  Each fabric can
+ *    provision the device with its unique operational credentials and manage
+ *    its own access control lists.
+ */
+#define CHIP_CONFIG_MAX_FABRICS 5 // 5 is the minimum number of supported fabrics
+
+/**
+ * @def CHIP_IM_MAX_NUM_SUBSCRIPTIONS
+ *
+ * @brief Defines the maximum number of ReadHandler for subscriptions, limits the number of active subscription transactions on
+ * server.
+ *
+ */
+#define CHIP_IM_MAX_NUM_SUBSCRIPTIONS 45
diff --git a/examples/energy-management-app/esp32/main/include/DeviceCallbacks.h b/examples/energy-management-app/esp32/main/include/DeviceCallbacks.h
new file mode 100644
index 00000000000000..3434cf9437c03d
--- /dev/null
+++ b/examples/energy-management-app/esp32/main/include/DeviceCallbacks.h
@@ -0,0 +1,33 @@
+/*
+ *
+ *    Copyright (c) 2021-2023 Project CHIP Authors
+ *    All rights reserved.
+ *
+ *    Licensed under the Apache License, Version 2.0 (the "License");
+ *    you may not use this file except in compliance with the License.
+ *    You may obtain a copy of the License at
+ *
+ *        http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *    Unless required by applicable law or agreed to in writing, software
+ *    distributed under the License is distributed on an "AS IS" BASIS,
+ *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *    See the License for the specific language governing permissions and
+ *    limitations under the License.
+ */
+#pragma once
+
+#include <app/util/af-types.h>
+#include <common/CHIPDeviceManager.h>
+#include <common/CommonDeviceCallbacks.h>
+#include <platform/CHIPDeviceLayer.h>
+
+class AppDeviceCallbacks : public CommonDeviceCallbacks
+{
+public:
+    virtual void PostAttributeChangeCallback(chip::EndpointId endpointId, chip::ClusterId clusterId, chip::AttributeId attributeId,
+                                             uint8_t type, uint16_t size, uint8_t * value);
+
+private:
+    void OnIdentifyPostAttributeChangeCallback(chip::EndpointId endpointId, chip::AttributeId attributeId, uint8_t * value);
+};
diff --git a/examples/energy-management-app/esp32/main/main.cpp b/examples/energy-management-app/esp32/main/main.cpp
new file mode 100644
index 00000000000000..77899a45b58d03
--- /dev/null
+++ b/examples/energy-management-app/esp32/main/main.cpp
@@ -0,0 +1,238 @@
+/*
+ *
+ *    Copyright (c) 2021-2023 Project CHIP Authors
+ *
+ *    Licensed under the Apache License, Version 2.0 (the "License");
+ *    you may not use this file except in compliance with the License.
+ *    You may obtain a copy of the License at
+ *
+ *        http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *    Unless required by applicable law or agreed to in writing, software
+ *    distributed under the License is distributed on an "AS IS" BASIS,
+ *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *    See the License for the specific language governing permissions and
+ *    limitations under the License.
+ */
+
+#include "DeviceCallbacks.h"
+#include <EVSEManufacturerImpl.h>
+#include <EnergyEvseManager.h>
+#include <EnergyManagementManager.h>
+
+#include "esp_log.h"
+#include <common/CHIPDeviceManager.h>
+#include <common/Esp32AppServer.h>
+#include <common/Esp32ThreadInit.h>
+#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0)
+#include "spi_flash_mmap.h"
+#else
+#include "esp_spi_flash.h"
+#endif
+#include "esp_system.h"
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+#include "nvs_flash.h"
+#include "shell_extension/launch.h"
+#include "shell_extension/openthread_cli_register.h"
+#include <app/server/Dnssd.h>
+#include <app/server/OnboardingCodesUtil.h>
+#include <credentials/DeviceAttestationCredsProvider.h>
+#include <credentials/examples/DeviceAttestationCredsExample.h>
+#include <platform/ESP32/ESP32Utils.h>
+
+#if CONFIG_ENABLE_ESP32_FACTORY_DATA_PROVIDER
+#include <platform/ESP32/ESP32FactoryDataProvider.h>
+#endif // CONFIG_ENABLE_ESP32_FACTORY_DATA_PROVIDER
+
+#if CONFIG_ENABLE_PW_RPC
+#include "Rpc.h"
+#endif
+
+#if CONFIG_ENABLE_ESP32_DEVICE_INFO_PROVIDER
+#include <platform/ESP32/ESP32DeviceInfoProvider.h>
+#else
+#include <DeviceInfoProviderImpl.h>
+#endif // CONFIG_ENABLE_ESP32_DEVICE_INFO_PROVIDER
+
+#if CONFIG_SEC_CERT_DAC_PROVIDER
+#include <platform/ESP32/ESP32SecureCertDACProvider.h>
+#endif
+
+#if CONFIG_ENABLE_ESP_INSIGHTS_TRACE
+#include <esp_insights.h>
+#include <tracing/esp32_trace/esp32_tracing.h>
+#include <tracing/registry.h>
+#endif
+
+#define ENERGY_EVSE_ENDPOINT 1
+
+using namespace ::chip;
+using namespace chip::app;
+using namespace chip::app::Clusters;
+using namespace ::chip::Credentials;
+using namespace ::chip::DeviceManager;
+using namespace ::chip::DeviceLayer;
+
+static EnergyEvseDelegate * gDelegate       = nullptr;
+static EnergyEvseManager * gInstance        = nullptr;
+static EVSEManufacturer * gEvseManufacturer = nullptr;
+
+#if CONFIG_ENABLE_ESP_INSIGHTS_TRACE
+extern const char insights_auth_key_start[] asm("_binary_insights_auth_key_txt_start");
+extern const char insights_auth_key_end[] asm("_binary_insights_auth_key_txt_end");
+#endif
+
+static const char * TAG = "energy-management-app";
+
+static AppDeviceCallbacks EchoCallbacks;
+static DeviceCallbacksDelegate sAppDeviceCallbacksDelegate;
+
+namespace {
+#if CONFIG_ENABLE_ESP32_FACTORY_DATA_PROVIDER
+DeviceLayer::ESP32FactoryDataProvider sFactoryDataProvider;
+#endif // CONFIG_ENABLE_ESP32_FACTORY_DATA_PROVIDER
+
+#if CONFIG_ENABLE_ESP32_DEVICE_INFO_PROVIDER
+DeviceLayer::ESP32DeviceInfoProvider gExampleDeviceInfoProvider;
+#else
+DeviceLayer::DeviceInfoProviderImpl gExampleDeviceInfoProvider;
+#endif // CONFIG_ENABLE_ESP32_DEVICE_INFO_PROVIDER
+
+#if CONFIG_SEC_CERT_DAC_PROVIDER
+DeviceLayer::ESP32SecureCertDACProvider gSecureCertDACProvider;
+#endif // CONFIG_SEC_CERT_DAC_PROVIDER
+
+chip::Credentials::DeviceAttestationCredentialsProvider * get_dac_provider(void)
+{
+#if CONFIG_SEC_CERT_DAC_PROVIDER
+    return &gSecureCertDACProvider;
+#elif CONFIG_ENABLE_ESP32_FACTORY_DATA_PROVIDER
+    return &sFactoryDataProvider;
+#else // EXAMPLE_DAC_PROVIDER
+    return chip::Credentials::Examples::GetExampleDACProvider();
+#endif
+}
+
+} // namespace
+
+void ApplicationInit()
+{
+    if ((gDelegate == nullptr) && (gInstance == nullptr) && (gEvseManufacturer == nullptr))
+    {
+        gDelegate = new EnergyEvseDelegate();
+        if (gDelegate != nullptr)
+        {
+            gInstance = new EnergyEvseManager(
+                EndpointId(ENERGY_EVSE_ENDPOINT), *gDelegate,
+                BitMask<EnergyEvse::Feature, uint32_t>(EnergyEvse::Feature::kChargingPreferences,
+                                                       EnergyEvse::Feature::kPlugAndCharge, EnergyEvse::Feature::kRfid,
+                                                       EnergyEvse::Feature::kSoCReporting, EnergyEvse::Feature::kV2x),
+                BitMask<OptionalAttributes, uint32_t>(OptionalAttributes::kSupportsUserMaximumChargingCurrent,
+                                                      OptionalAttributes::kSupportsRandomizationWindow,
+                                                      OptionalAttributes::kSupportsApproximateEvEfficiency),
+                BitMask<OptionalCommands, uint32_t>(OptionalCommands::kSupportsStartDiagnostics));
+            gInstance->Init(); /* Register Attribute & Command handlers */
+        }
+    }
+    else
+    {
+        ChipLogError(AppServer, "EVSE Instance or Delegate already exist.")
+    }
+
+    if (gEvseManufacturer == nullptr)
+    {
+        gEvseManufacturer = new EVSEManufacturer();
+        gEvseManufacturer->Init(gInstance);
+    }
+    else
+    {
+        ChipLogError(AppServer, "EVSEManufacturer already exists.")
+    }
+}
+
+static void InitServer(intptr_t context)
+{
+    ApplicationInit();
+    // Print QR Code URL
+    PrintOnboardingCodes(chip::RendezvousInformationFlags(CONFIG_RENDEZVOUS_MODE));
+
+    DeviceCallbacksDelegate::Instance().SetAppDelegate(&sAppDeviceCallbacksDelegate);
+    Esp32AppServer::Init(); // Init ZCL Data Model and CHIP App Server AND Initialize device attestation config
+#if CONFIG_ENABLE_ESP_INSIGHTS_TRACE
+    esp_insights_config_t config = {
+        .log_type = ESP_DIAG_LOG_TYPE_ERROR | ESP_DIAG_LOG_TYPE_WARNING | ESP_DIAG_LOG_TYPE_EVENT,
+        .auth_key = insights_auth_key_start,
+    };
+
+    esp_err_t ret = esp_insights_init(&config);
+
+    if (ret != ESP_OK)
+    {
+        ESP_LOGE(TAG, "Failed to initialize ESP Insights, err:0x%x", ret);
+    }
+
+    static Tracing::Insights::ESP32Backend backend;
+    Tracing::Register(backend);
+#endif
+}
+
+extern "C" void app_main()
+{
+    // Initialize the ESP NVS layer.
+    esp_err_t err = nvs_flash_init();
+    if (err != ESP_OK)
+    {
+        ESP_LOGE(TAG, "nvs_flash_init() failed: %s", esp_err_to_name(err));
+        return;
+    }
+    err = esp_event_loop_create_default();
+    if (err != ESP_OK)
+    {
+        ESP_LOGE(TAG, "esp_event_loop_create_default() failed: %s", esp_err_to_name(err));
+        return;
+    }
+#if CONFIG_ENABLE_PW_RPC
+    chip::rpc::Init();
+#endif
+
+    ESP_LOGI(TAG, "==================================================");
+    ESP_LOGI(TAG, "chip-esp32-energy-management-example starting");
+    ESP_LOGI(TAG, "==================================================");
+
+#if CONFIG_ENABLE_CHIP_SHELL
+#if CONFIG_OPENTHREAD_CLI
+    chip::RegisterOpenThreadCliCommands();
+#endif
+    chip::LaunchShell();
+#endif
+#if CHIP_DEVICE_CONFIG_ENABLE_WIFI
+    if (Internal::ESP32Utils::InitWiFiStack() != CHIP_NO_ERROR)
+    {
+        ESP_LOGE(TAG, "Failed to initialize WiFi stack");
+        return;
+    }
+#endif // CHIP_DEVICE_CONFIG_ENABLE_WIFI
+
+    DeviceLayer::SetDeviceInfoProvider(&gExampleDeviceInfoProvider);
+
+    CHIPDeviceManager & deviceMgr = CHIPDeviceManager::GetInstance();
+    CHIP_ERROR error              = deviceMgr.Init(&EchoCallbacks);
+    if (error != CHIP_NO_ERROR)
+    {
+        ESP_LOGE(TAG, "device.Init() failed: %s", ErrorStr(error));
+        return;
+    }
+
+#if CONFIG_ENABLE_ESP32_FACTORY_DATA_PROVIDER
+    SetCommissionableDataProvider(&sFactoryDataProvider);
+#if CONFIG_ENABLE_ESP32_DEVICE_INSTANCE_INFO_PROVIDER
+    SetDeviceInstanceInfoProvider(&sFactoryDataProvider);
+#endif
+#endif
+
+    SetDeviceAttestationCredentialsProvider(get_dac_provider());
+    ESPOpenThreadInit();
+
+    chip::DeviceLayer::PlatformMgr().ScheduleWork(InitServer, reinterpret_cast<intptr_t>(nullptr));
+}
diff --git a/examples/energy-management-app/esp32/partitions.csv b/examples/energy-management-app/esp32/partitions.csv
new file mode 100644
index 00000000000000..428d873fa54a05
--- /dev/null
+++ b/examples/energy-management-app/esp32/partitions.csv
@@ -0,0 +1,10 @@
+# Name,   Type, SubType, Offset,  Size, Flags
+# Note: Firmware partition offset needs to be 64K aligned, initial 36K (9 sectors) are reserved for bootloader and partition table
+esp_secure_cert,  0x3F,        ,    0xD000,     0x2000,    encrypted
+nvs,      data, nvs,     0x10000,   0xC000,
+nvs_keys, data, nvs_keys,,          0x1000,
+otadata,  data, ota,     ,          0x2000
+phy_init, data, phy,     ,          0x1000,
+ota_0,    app,  ota_0,   0x20000,   0x1E0000,
+ota_1,    app,  ota_1,   0x200000,  0x1E0000,
+fctry,    data, nvs,     0x3E0000,  0x6000
diff --git a/examples/energy-management-app/esp32/partitions_encrypted.csv b/examples/energy-management-app/esp32/partitions_encrypted.csv
new file mode 100644
index 00000000000000..94ec9f7a2b7f17
--- /dev/null
+++ b/examples/energy-management-app/esp32/partitions_encrypted.csv
@@ -0,0 +1,8 @@
+# Name,   Type, SubType, Offset,  Size, Flags
+# Note: if you have increased the bootloader size, make sure to update the offsets to avoid overlap
+nvs,      data, nvs,     ,        0xC000,
+otadata,  data, ota,     ,        0x2000, encrypted
+phy_init, data, phy,     ,        0x1000, encrypted
+ota_0,    app,  ota_0,   ,        1500K, encrypted
+ota_1,    app,  ota_1,   ,        1500K, encrypted
+nvs_key,  data, nvs_keys,,        0x1000, encrypted
diff --git a/examples/energy-management-app/esp32/sdkconfig.defaults b/examples/energy-management-app/esp32/sdkconfig.defaults
new file mode 100644
index 00000000000000..a8833c13a1a23b
--- /dev/null
+++ b/examples/energy-management-app/esp32/sdkconfig.defaults
@@ -0,0 +1,66 @@
+#
+#    Copyright (c) 2021 Project CHIP Authors
+#    All rights reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License");
+#    you may not use this file except in compliance with the License.
+#    You may obtain a copy of the License at
+#
+#        http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS,
+#    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#    See the License for the specific language governing permissions and
+#    limitations under the License.
+#
+#    Description:
+#      Some useful defaults for the demo app configuration.
+#
+
+# Default to 921600 baud when flashing and monitoring device
+CONFIG_ESPTOOLPY_BAUD_921600B=y
+CONFIG_ESPTOOLPY_BAUD=921600
+CONFIG_ESPTOOLPY_COMPRESSED=y
+CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B=y
+CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
+
+#enable BT
+CONFIG_BT_ENABLED=y
+CONFIG_BT_NIMBLE_ENABLED=y
+
+#disable BT connection reattempt
+CONFIG_BT_NIMBLE_ENABLE_CONN_REATTEMPT=n
+
+#enable lwip ipv6 autoconfig
+CONFIG_LWIP_IPV6_AUTOCONFIG=y
+
+#enable debug shell
+CONFIG_ENABLE_CHIP_SHELL=y
+
+# Use a custom partition table
+CONFIG_PARTITION_TABLE_CUSTOM=y
+CONFIG_PARTITION_TABLE_FILENAME="partitions.csv"
+
+#enable lwIP route hooks
+CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT=y
+CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT=y
+
+# Serial Flasher config
+CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
+CONFIG_ESPTOOLPY_FLASHSIZE="4MB"
+
+# Disable softap support by default
+CONFIG_ESP_WIFI_SOFTAP_SUPPORT=n
+# This example uses the older version of RMT driver to work with both
+# idf-v4.4.3 and idf-v5.0, so suppressing the warnings by setting below option
+CONFIG_RMT_SUPPRESS_DEPRECATE_WARN=y
+
+# Enable HKDF in mbedtls
+CONFIG_MBEDTLS_HKDF_C=y
+
+# Disable Read Client
+CONFIG_DISABLE_READ_CLIENT=y
+
+# Increase LwIP IPv6 address number
+CONFIG_LWIP_IPV6_NUM_ADDRESSES=6
diff --git a/examples/energy-management-app/esp32/sdkconfig.defaults.esp32c2 b/examples/energy-management-app/esp32/sdkconfig.defaults.esp32c2
new file mode 100644
index 00000000000000..5e5d596cacb673
--- /dev/null
+++ b/examples/energy-management-app/esp32/sdkconfig.defaults.esp32c2
@@ -0,0 +1,22 @@
+# Disable chip shell
+CONFIG_ENABLE_CHIP_SHELL=n
+
+# CONFIG_ESP32_WIFI_IRAM_OPT is not set
+# CONFIG_ESP32_WIFI_RX_IRAM_OPT is not set
+CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH=y
+CONFIG_FREERTOS_PLACE_SNAPSHOT_FUNS_INTO_FLASH=y
+
+CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE=y
+
+CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=16
+CONFIG_LWIP_TCP_RECVMBOX_SIZE=8
+
+CONFIG_BT_NIMBLE_ROLE_CENTRAL=n
+CONFIG_BT_NIMBLE_ROLE_OBSERVER=n
+
+CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=4
+CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=8
+CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=16
+
+# Enable HKDF in mbedtls
+CONFIG_MBEDTLS_HKDF_C=y
diff --git a/examples/energy-management-app/esp32/sdkconfig.defaults.esp32c6 b/examples/energy-management-app/esp32/sdkconfig.defaults.esp32c6
new file mode 100644
index 00000000000000..4947bd2fdf276f
--- /dev/null
+++ b/examples/energy-management-app/esp32/sdkconfig.defaults.esp32c6
@@ -0,0 +1,67 @@
+CONFIG_IDF_TARGET="esp32c6"
+
+# Default to 921600 baud when flashing and monitoring device
+CONFIG_ESPTOOLPY_BAUD_921600B=y
+CONFIG_ESPTOOLPY_BAUD=921600
+CONFIG_ESPTOOLPY_COMPRESSED=y
+CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
+CONFIG_ESPTOOLPY_FLASHFREQ_40M=y
+CONFIG_ESPTOOLPY_FLASHFREQ="40m"
+CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B=y
+CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
+
+# libsodium
+CONFIG_LIBSODIUM_USE_MBEDTLS_SHA=y
+
+
+# NIMBLE
+CONFIG_BT_ENABLED=y
+CONFIG_BT_NIMBLE_ENABLED=y
+CONFIG_BT_NIMBLE_EXT_ADV=n
+CONFIG_BT_NIMBLE_HCI_EVT_BUF_SIZE=70
+CONFIG_USE_BLE_ONLY_FOR_COMMISSIONING=n
+
+# Disable OpenThread
+CONFIG_OPENTHREAD_ENABLED=n
+
+# Disable lwip ipv6 autoconfig
+CONFIG_LWIP_IPV6_AUTOCONFIG=n
+
+# Use a custom partition table
+CONFIG_PARTITION_TABLE_CUSTOM=y
+CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
+
+# LwIP config for OpenThread
+CONFIG_LWIP_IPV6_NUM_ADDRESSES=8
+CONFIG_LWIP_MULTICAST_PING=y
+
+# mbedTLS
+CONFIG_MBEDTLS_HARDWARE_AES=n
+CONFIG_MBEDTLS_HARDWARE_MPI=n
+CONFIG_MBEDTLS_HARDWARE_SHA=n
+CONFIG_MBEDTLS_HARDWARE_ECC=y
+CONFIG_MBEDTLS_CMAC_C=y
+CONFIG_MBEDTLS_KEY_EXCHANGE_ECJPAKE=y
+CONFIG_MBEDTLS_ECJPAKE_C=y
+
+# MDNS platform
+CONFIG_USE_MINIMAL_MDNS=y
+CONFIG_ENABLE_EXTENDED_DISCOVERY=y
+
+# FreeRTOS should use legacy API
+CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY=y
+
+# Wi-Fi Settings
+CONFIG_ENABLE_WIFI_STATION=y
+CONFIG_ENABLE_WIFI_AP=n
+# Enable this to avoid implicit declaration of function 'esp_send_assoc_resp'
+CONFIG_ESP_WIFI_SOFTAP_SUPPORT=y
+
+# Enable OTA Requestor
+CONFIG_ENABLE_OTA_REQUESTOR=y
+
+# Enable chip shell
+CONFIG_ENABLE_CHIP_SHELL=y
+
+# Enable HKDF in mbedtls
+CONFIG_MBEDTLS_HKDF_C=y
diff --git a/examples/energy-management-app/esp32/sdkconfig.defaults.esp32h2 b/examples/energy-management-app/esp32/sdkconfig.defaults.esp32h2
new file mode 100644
index 00000000000000..11d5991c353b20
--- /dev/null
+++ b/examples/energy-management-app/esp32/sdkconfig.defaults.esp32h2
@@ -0,0 +1,81 @@
+CONFIG_IDF_TARGET="esp32h2"
+CONFIG_IDF_TARGET_ESP32H2_BETA_VERSION_2=y
+
+# Default to 921600 baud when flashing and monitoring device
+CONFIG_ESPTOOLPY_BAUD_921600B=y
+CONFIG_ESPTOOLPY_BAUD=921600
+CONFIG_ESPTOOLPY_COMPRESSED=y
+CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
+CONFIG_ESPTOOLPY_FLASHFREQ_40M=y
+CONFIG_ESPTOOLPY_FLASHFREQ="40m"
+CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B=y
+CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
+
+# libsodium
+CONFIG_LIBSODIUM_USE_MBEDTLS_SHA=y
+
+# Serial Flasher config
+CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
+CONFIG_ESPTOOLPY_FLASHSIZE="4MB"
+
+# NIMBLE
+CONFIG_BT_ENABLED=y
+CONFIG_BT_NIMBLE_ENABLED=y
+CONFIG_BT_NIMBLE_EXT_ADV=n
+CONFIG_BT_NIMBLE_HCI_EVT_BUF_SIZE=70
+CONFIG_USE_BLE_ONLY_FOR_COMMISSIONING=n
+
+# Enable OpenThread
+CONFIG_OPENTHREAD_ENABLED=y
+CONFIG_OPENTHREAD_SRP_CLIENT=y
+CONFIG_OPENTHREAD_LOG_LEVEL_DYNAMIC=n
+CONFIG_OPENTHREAD_LOG_LEVEL_NOTE=y
+CONFIG_OPENTHREAD_CLI=n
+CONFIG_OPENTHREAD_DNS_CLIENT=y
+
+# Disable lwip ipv6 autoconfig
+CONFIG_LWIP_IPV6_AUTOCONFIG=n
+
+# Use a custom partition table
+CONFIG_PARTITION_TABLE_CUSTOM=y
+CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
+
+# LwIP config for OpenThread
+CONFIG_LWIP_IPV6_NUM_ADDRESSES=8
+CONFIG_LWIP_MULTICAST_PING=y
+
+# mbedTLS
+CONFIG_MBEDTLS_HARDWARE_AES=n
+CONFIG_MBEDTLS_HARDWARE_MPI=n
+CONFIG_MBEDTLS_HARDWARE_SHA=n
+CONFIG_MBEDTLS_HARDWARE_ECC=y
+CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN=n
+CONFIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY=n
+CONFIG_MBEDTLS_CMAC_C=y
+CONFIG_MBEDTLS_SSL_PROTO_DTLS=y
+CONFIG_MBEDTLS_KEY_EXCHANGE_ECJPAKE=y
+
+# rtc clk for ble
+# CONFIG_ESP32H2_RTC_CLK_SRC_EXT_CRYS=y
+
+# MDNS platform
+CONFIG_USE_MINIMAL_MDNS=n
+CONFIG_ENABLE_EXTENDED_DISCOVERY=y
+
+# FreeRTOS should use legacy API
+CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY=y
+
+# Disable STA and AP for ESP32H2
+CONFIG_ENABLE_WIFI_STATION=n
+CONFIG_ENABLE_WIFI_AP=n
+# Enable this to avoid implicit declaration of function 'esp_send_assoc_resp'
+CONFIG_ESP_WIFI_SOFTAP_SUPPORT=y
+
+# Enable OTA Requestor
+CONFIG_ENABLE_OTA_REQUESTOR=y
+
+# Enable chip shell
+CONFIG_ENABLE_CHIP_SHELL=y
+
+# Enable HKDF in mbedtls
+CONFIG_MBEDTLS_HKDF_C=y
diff --git a/examples/energy-management-app/esp32/sdkconfig.optimize.defaults b/examples/energy-management-app/esp32/sdkconfig.optimize.defaults
new file mode 100644
index 00000000000000..87248eebfcdfa7
--- /dev/null
+++ b/examples/energy-management-app/esp32/sdkconfig.optimize.defaults
@@ -0,0 +1,95 @@
+#
+#    Copyright (c) 2023 Project CHIP Authors
+#    All rights reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License");
+#    you may not use this file except in compliance with the License.
+#    You may obtain a copy of the License at
+#
+#        http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS,
+#    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#    See the License for the specific language governing permissions and
+#    limitations under the License.
+#
+#    Description:
+#      Some useful defaults for the demo app configuration.
+#
+
+# Default to 921600 baud when flashing and monitoring device
+CONFIG_ESPTOOLPY_BAUD_921600B=y
+CONFIG_ESPTOOLPY_BAUD=921600
+CONFIG_ESPTOOLPY_COMPRESSED=y
+CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B=y
+CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
+
+#enable BT
+CONFIG_BT_ENABLED=y
+CONFIG_BT_NIMBLE_ENABLED=y
+
+#disable BT connection reattempt
+CONFIG_BT_NIMBLE_ENABLE_CONN_REATTEMPT=n
+
+#enable lwip ipv6 autoconfig
+CONFIG_LWIP_IPV6_AUTOCONFIG=y
+
+#enable debug shell
+CONFIG_ENABLE_CHIP_SHELL=n
+
+# Use a custom partition table
+CONFIG_PARTITION_TABLE_CUSTOM=y
+CONFIG_PARTITION_TABLE_FILENAME="partitions.csv"
+
+#enable lwIP route hooks
+CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT=y
+CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT=y
+
+# Serial Flasher config
+CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
+CONFIG_ESPTOOLPY_FLASHSIZE="4MB"
+
+# Disable softap support by default
+CONFIG_ESP_WIFI_SOFTAP_SUPPORT=n
+# This example uses the older version of RMT driver to work with both
+# idf-v4.4.3 and idf-v5.0, so suppressing the warnings by setting below option
+CONFIG_RMT_SUPPRESS_DEPRECATE_WARN=y
+
+# Compiler options new options--
+CONFIG_COMPILER_OPTIMIZATION_SIZE=y
+CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE=y
+
+# Bluetooth controller
+CONFIG_BTDM_CTRL_BLE_MAX_CONN=1
+CONFIG_BTDM_CTRL_BLE_MAX_CONN_EFF=1
+
+# NimBLE Options 
+CONFIG_BT_NIMBLE_MAX_CONNECTIONS=1
+
+# Wi-Fi
+CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=4
+CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=8
+CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=16
+
+# FreeRTOS
+CONFIG_FREERTOS_UNICORE=y
+
+# Add RTC memory to system heap
+CONFIG_ESP_SYSTEM_ALLOW_RTC_FAST_MEM_AS_HEAP=y
+
+# LWIP
+CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=16
+
+# TCP
+CONFIG_LWIP_TCP_SYNMAXRTX=6
+
+# Compatibility options
+CONFIG_BTDM_CONTROLLER_BLE_MAX_CONN=1
+CONFIG_BTDM_CONTROLLER_BLE_MAX_CONN_EFF=1
+CONFIG_NIMBLE_MAX_CONNECTIONS=1
+CONFIG_TCPIP_RECVMBOX_SIZE=16
+CONFIG_TCP_SYNMAXRTX=6
+
+# Enable HKDF in mbedtls
+CONFIG_MBEDTLS_HKDF_C=y
diff --git a/examples/energy-management-app/esp32/sdkconfig_m5stack.defaults b/examples/energy-management-app/esp32/sdkconfig_m5stack.defaults
new file mode 100644
index 00000000000000..990b77a2adac35
--- /dev/null
+++ b/examples/energy-management-app/esp32/sdkconfig_m5stack.defaults
@@ -0,0 +1,71 @@
+#
+#    Copyright (c) 2021-2023 Project CHIP Authors
+#    All rights reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License");
+#    you may not use this file except in compliance with the License.
+#    You may obtain a copy of the License at
+#
+#        http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS,
+#    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#    See the License for the specific language governing permissions and
+#    limitations under the License.
+#
+#    Description:
+#      Some useful defaults for the demo app configuration.
+#
+CONFIG_IDF_TARGET="esp32"
+CONFIG_IDF_TARGET_ESP32=y
+CONFIG_DEVICE_TYPE_M5STACK=y
+
+# Default to 921600 baud when flashing and monitoring device
+CONFIG_ESPTOOLPY_BAUD_921600B=y
+CONFIG_ESPTOOLPY_BAUD=921600
+CONFIG_ESPTOOLPY_COMPRESSED=y
+CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B=y
+CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
+
+#enable BT
+CONFIG_BT_ENABLED=y
+CONFIG_BT_NIMBLE_ENABLED=y
+
+#disable BT connection reattempt
+CONFIG_BT_NIMBLE_ENABLE_CONN_REATTEMPT=n
+
+#enable lwip ipv6 autoconfig
+CONFIG_LWIP_IPV6_AUTOCONFIG=y
+
+#enable debug shell
+CONFIG_ENABLE_CHIP_SHELL=y
+
+# Use a custom partition table
+CONFIG_PARTITION_TABLE_CUSTOM=y
+CONFIG_PARTITION_TABLE_FILENAME="partitions.csv"
+
+#enable lwIP route hooks
+CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT=y
+CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT=y
+
+# Main task needs a bit more stack than the default
+# default is 3584, bump this up to 5k.
+CONFIG_ESP_MAIN_TASK_STACK_SIZE=5120
+
+# Serial Flasher config
+CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
+CONFIG_ESPTOOLPY_FLASHSIZE="4MB"
+
+# Disable softap support by default
+CONFIG_ESP_WIFI_SOFTAP_SUPPORT=n
+# This example uses the older version of RMT driver to work with both
+# idf-v4.4.3 and idf-v5.0, so suppressing the warnings by setting below option
+CONFIG_RMT_SUPPRESS_DEPRECATE_WARN=y
+
+# Enable HKDF in mbedtls
+CONFIG_MBEDTLS_HKDF_C=y
+
+# Optimize IRAM
+CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH=y
+
diff --git a/examples/energy-management-app/esp32/sdkconfig_rpc.defaults b/examples/energy-management-app/esp32/sdkconfig_rpc.defaults
new file mode 100644
index 00000000000000..57ac2d6b027c56
--- /dev/null
+++ b/examples/energy-management-app/esp32/sdkconfig_rpc.defaults
@@ -0,0 +1,57 @@
+#
+#    Copyright (c) 2020 Project CHIP Authors
+#    Copyright (c) 2018 Nest Labs, Inc.
+#    All rights reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License");
+#    you may not use this file except in compliance with the License.
+#    You may obtain a copy of the License at
+#
+#        http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS,
+#    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#    See the License for the specific language governing permissions and
+#    limitations under the License.
+#
+#    Description:
+#      CI uses this to select the ESP32C3-DevKitM.
+#
+# Default to 921600 baud when flashing and monitoring device
+CONFIG_ESPTOOLPY_BAUD_921600B=y
+CONFIG_ESPTOOLPY_BAUD=921600
+CONFIG_ESPTOOLPY_COMPRESSED=y
+CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B=y
+CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
+
+#enable BT
+CONFIG_BT_ENABLED=y
+CONFIG_BT_NIMBLE_ENABLED=y
+
+#enable lwip ipv6 autoconfig
+CONFIG_LWIP_IPV6_AUTOCONFIG=y
+
+# Use a custom partition table
+CONFIG_PARTITION_TABLE_CUSTOM=y
+CONFIG_PARTITION_TABLE_FILENAME="partitions.csv"
+
+#enable lwIP route hooks
+CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT=y
+CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT=y
+
+# Serial Flasher config
+CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
+CONFIG_ESPTOOLPY_FLASHSIZE="4MB"
+
+# PW RPC Debug channel
+CONFIG_EXAMPLE_UART_PORT_NUM=0
+CONFIG_EXAMPLE_UART_BAUD_RATE=115200
+CONFIG_EXAMPLE_UART_RXD=3
+CONFIG_EXAMPLE_UART_TXD=1
+CONFIG_ENABLE_PW_RPC=y
+
+# Enable HKDF in mbedtls
+CONFIG_MBEDTLS_HKDF_C=y
+
+CONFIG_DIAG_USE_EXTERNAL_LOG_WRAP=y
diff --git a/examples/energy-management-app/esp32/third_party/connectedhomeip b/examples/energy-management-app/esp32/third_party/connectedhomeip
new file mode 120000
index 00000000000000..11a54ed360106c
--- /dev/null
+++ b/examples/energy-management-app/esp32/third_party/connectedhomeip
@@ -0,0 +1 @@
+../../../../
\ No newline at end of file