From f6d47664f174adb08df3b7694029c6cd897ebc8c Mon Sep 17 00:00:00 2001
From: wyhong <30567533+wy-hh@users.noreply.github.com>
Date: Tue, 13 Dec 2022 22:57:41 +0800
Subject: [PATCH] [Bouffalolab] Cherry-pick: Remove platform limit for tool
 installation and update readme (#24053)

* update readme

* remove platform limit on bflb-iot-tool

* update readme

* remove RPC descriptions

* Fix restyle
---
 examples/lighting-app/bouffalolab/README.md | 52 ++++++---------------
 scripts/requirements.bouffalolab.txt        |  2 +-
 2 files changed, 16 insertions(+), 38 deletions(-)

diff --git a/examples/lighting-app/bouffalolab/README.md b/examples/lighting-app/bouffalolab/README.md
index 5085a482be0b73..a43f50ab978697 100644
--- a/examples/lighting-app/bouffalolab/README.md
+++ b/examples/lighting-app/bouffalolab/README.md
@@ -88,13 +88,6 @@ and BL706 develop board `XT-ZB6-DevKit`.
     ./scripts/build/build_examples.py --target bouffalolab-xt-zb6-devkit-light-115200 build
     ```
 
--   Build lighting app with RPC enabled and UART baudrate 115200.
-
-    ```
-    ./scripts/build/build_examples.py --target bouffalolab-bl602-iot-matter-v1-light-rpc build
-    ./scripts/build/build_examples.py --target bouffalolab-xt-zb6-devkit-light-rpc build
-    ```
-
 ## Download image
 
 -   Using script `*.flash.py`.
@@ -104,9 +97,11 @@ and BL706 develop board `XT-ZB6-DevKit`.
     `chip-bl702-lighting-example.flash.py` will generate under build output
     folder for BL602 or BL702 building.
 
-    > Note, different build options will generate different output folder.
-
-    > Note, make sure terminal is under Matter build environment.
+    > Note 1, `*.flash.py` should be ran under Matter build environment; if
+    > python module `bflb_iot_tool` is not found, please try to do
+    > `source scripts/bootstrap.sh` or install as
+    > `pip3 install bflb-iot-tool`.<br> Note 2, different build options will
+    > generate different output folder.
 
     Download operation steps as below, please check `help` option of script for
     more detail.
@@ -145,7 +140,8 @@ and BL706 develop board `XT-ZB6-DevKit`.
             > Note, better to append --erase option to download image for BL602
             > develop board at first time.
 
--   Using `Bouffalo Lab` GUI flash tool`BLDevCube`
+-   Using `Bouffalo Lab` GUI flash tool `BLDevCube`, please download on
+    [this page](https://dev.bouffalolab.com/download).
     -   Hold BOOT pin and reset chip, put the board in download mode.
     -   Select `DTS` file;
     -   Select Partition Table under
@@ -173,11 +169,10 @@ and BL706 develop board `XT-ZB6-DevKit`.
 -   To do factory reset, press BOOT button over 4 seconds, release BOOT button
     after led blink stopped.
 
-## Test with chip-tool
+## Test Commission and Control with chip-tool
 
 Please follow [chip_tool_guide](../../../docs/guides/chip_tool_guide.md) and
-[guide](../../chip-tool/README.md) to build and use Matter official test
-chip-tool.
+[guide](../../chip-tool/README.md) to build and use chip-tool for test.
 
 ### Prerequisite for Thread Protocol
 
@@ -193,7 +188,7 @@ router to get Thread network credential.
 sudo ot-ctl dataset active -x
 ```
 
-#### Commissioning over BLE
+### Commissioning over BLE
 
 -   Reset the board or factory reset the board
 
@@ -213,10 +208,10 @@ sudo ot-ctl dataset active -x
         ```
 
     > `<node_id>`, which is node ID assigned to device within chip-tool
-    > fabric<br> > `<wifi_ssid>`, Wi-Fi network SSID<br> > `<wifi_passwd>`,
-    > Wi-FI network password<br> > `<thread_operational_dataset>`, Thread
-    > network credential which running `sudo ot-ctl dataset active -x` command
-    > on border router to get.<br>
+    > fabric<br> `<wifi_ssid>`, Wi-Fi network SSID<br> `<wifi_passwd>`, Wi-FI
+    > network password<br> `<thread_operational_dataset>`, Thread network
+    > credential which running `sudo ot-ctl dataset active -x` command on border
+    > router to get.
 
 ### Cluster control
 
@@ -254,7 +249,7 @@ After successful commissioning, cluster commands available to control the board.
     ./chip-tool identify identify 10 <node_id> 1
     ```
 
-## OTA software upgrade with ota-provider-app
+## Test OTA software upgrade with ota-provider-app
 
 Please take [guide](../../ota-provider-app/linux/README.md) for more detail on
 ota-provider-app build and usage.
@@ -308,20 +303,3 @@ ota-provider-app build and usage.
     where `<node_id_to_lighting_app>` is node id of BL602/BL702 lighting app.
 -   After OTA software upgrade gets done, BL602/BL702 will get reboot
     automatically.
-
-## Run RPC Console
-
--   Build chip-console following this
-    [guide](../../common/pigweed/rpc_console/README.md)
-
--   Start the console
-
-    ```
-    $ chip-console --device /dev/ttyUSB0 -b 2000000
-    ```
-
--   Get or Set the light state
-
-    `rpcs.chip.rpc.Lighting.Get()`
-
-    `rpcs.chip.rpc.Lighting.Set(on=True, level=128)`
diff --git a/scripts/requirements.bouffalolab.txt b/scripts/requirements.bouffalolab.txt
index ceda55f866c282..87fa5c49ab96e5 100644
--- a/scripts/requirements.bouffalolab.txt
+++ b/scripts/requirements.bouffalolab.txt
@@ -1 +1 @@
-bflb-iot-tool>=1.8.0 ; platform_machine != 'aarch64' and sys_platform == 'linux'
\ No newline at end of file
+bflb-iot-tool>=1.8.0