diff --git a/.github/workflows/bloat_check.yaml b/.github/workflows/bloat_check.yaml
index 36908d97d06385..fe3876435755d0 100644
--- a/.github/workflows/bloat_check.yaml
+++ b/.github/workflows/bloat_check.yaml
@@ -33,7 +33,7 @@ jobs:
         runs-on: ubuntu-latest
 
         container:
-            image: ghcr.io/project-chip/chip-build:24
+            image: ghcr.io/project-chip/chip-build:25
 
         steps:
             - name: Checkout
diff --git a/.github/workflows/build.yaml b/.github/workflows/build.yaml
index 1fdec87ac8a696..66ae3a04488447 100644
--- a/.github/workflows/build.yaml
+++ b/.github/workflows/build.yaml
@@ -40,7 +40,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build:24
+            image: ghcr.io/project-chip/chip-build:25
             volumes:
                 - "/tmp/log_output:/tmp/test_logs"
             options: --privileged --sysctl "net.ipv6.conf.all.disable_ipv6=0
@@ -135,7 +135,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build:24
+            image: ghcr.io/project-chip/chip-build:25
             volumes:
                 - "/tmp/log_output:/tmp/test_logs"
             options: --privileged --sysctl "net.ipv6.conf.all.disable_ipv6=0
@@ -283,7 +283,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build:24
+            image: ghcr.io/project-chip/chip-build:25
             volumes:
                 - "/tmp/log_output:/tmp/test_logs"
             options: --sysctl "net.ipv6.conf.all.disable_ipv6=0
@@ -343,7 +343,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build:24
+            image: ghcr.io/project-chip/chip-build:25
             volumes:
                 - "/tmp/log_output:/tmp/test_logs"
             options: --sysctl "net.ipv6.conf.all.disable_ipv6=0
@@ -451,7 +451,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build:24
+            image: ghcr.io/project-chip/chip-build:25
             volumes:
                 - "/tmp/log_output:/tmp/test_logs"
             options: --privileged --sysctl "net.ipv6.conf.all.disable_ipv6=0
diff --git a/.github/workflows/chef.yaml b/.github/workflows/chef.yaml
index e1de11ca0becb1..abb438c004fa76 100644
--- a/.github/workflows/chef.yaml
+++ b/.github/workflows/chef.yaml
@@ -33,7 +33,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build:24
+            image: ghcr.io/project-chip/chip-build:25
             options: --user root
 
         steps:
@@ -54,7 +54,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-esp32:24
+            image: ghcr.io/project-chip/chip-build-esp32:25
             options: --user root
 
         steps:
@@ -75,7 +75,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-nrf-platform:24
+            image: ghcr.io/project-chip/chip-build-nrf-platform:25
             options: --user root
 
         steps:
@@ -96,7 +96,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-telink:24
+            image: ghcr.io/project-chip/chip-build-telink:25
             options: --user root
 
         steps:
@@ -106,6 +106,9 @@ jobs:
               uses: ./.github/actions/checkout-submodules-and-bootstrap
               with:
                 platform: telink
+            # - name: Update Zephyr to specific revision (for developers purpose)
+            #   shell: bash
+            #   run: scripts/run_in_build_env.sh "python3 scripts/tools/telink/update_zephyr.py e6a32f41ccec55c2233631406842b71ff270089d"
             - name: CI Examples Telink
               shell: bash
               run: |
diff --git a/.github/workflows/cirque.yaml b/.github/workflows/cirque.yaml
index 5338ed27e4c2fe..8a869f9577928f 100644
--- a/.github/workflows/cirque.yaml
+++ b/.github/workflows/cirque.yaml
@@ -40,7 +40,7 @@ jobs:
         # need to run with privilege, which isn't supported by job.XXX.contaner
         #  https://github.com/actions/container-action/issues/2
         #         container:
-        #             image: ghcr.io/project-chip/chip-build-cirque:24
+        #             image: ghcr.io/project-chip/chip-build-cirque:25
         #             volumes:
         #                 - "/tmp:/tmp"
         #                 - "/dev/pts:/dev/pts"
diff --git a/.github/workflows/doxygen.yaml b/.github/workflows/doxygen.yaml
index 0480d013741b85..4dcee19d7ee344 100644
--- a/.github/workflows/doxygen.yaml
+++ b/.github/workflows/doxygen.yaml
@@ -81,7 +81,7 @@ jobs:
 
         runs-on: ubuntu-latest
         container:
-            image: ghcr.io/project-chip/chip-build-doxygen:24
+            image: ghcr.io/project-chip/chip-build-doxygen:25
 
         if: github.actor != 'restyled-io[bot]'
 
diff --git a/.github/workflows/examples-ameba.yaml b/.github/workflows/examples-ameba.yaml
index 95ed4e23999c76..90d707b2a6ccc4 100644
--- a/.github/workflows/examples-ameba.yaml
+++ b/.github/workflows/examples-ameba.yaml
@@ -36,7 +36,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-ameba:24
+            image: ghcr.io/project-chip/chip-build-ameba:25
             options: --user root
 
         steps:
diff --git a/.github/workflows/examples-asr.yaml b/.github/workflows/examples-asr.yaml
index 93c26450b01c85..f49c6d10f86dfd 100644
--- a/.github/workflows/examples-asr.yaml
+++ b/.github/workflows/examples-asr.yaml
@@ -34,7 +34,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-asr:24
+            image: ghcr.io/project-chip/chip-build-asr:25
             options: --user root
 
         steps:
diff --git a/.github/workflows/examples-bouffalolab.yaml b/.github/workflows/examples-bouffalolab.yaml
index e0aa45bf677c50..fdaba18c3a06a0 100644
--- a/.github/workflows/examples-bouffalolab.yaml
+++ b/.github/workflows/examples-bouffalolab.yaml
@@ -35,7 +35,7 @@ jobs:
     if: github.actor != 'restyled-io[bot]'
 
     container:
-      image: ghcr.io/project-chip/chip-build-bouffalolab:24
+      image: ghcr.io/project-chip/chip-build-bouffalolab:25
       volumes:
         - "/tmp/bloat_reports:/tmp/bloat_reports"
     steps:
diff --git a/.github/workflows/examples-cc13x2x7_26x2x7.yaml b/.github/workflows/examples-cc13x2x7_26x2x7.yaml
index ea90b8729766f9..77371b836fe571 100644
--- a/.github/workflows/examples-cc13x2x7_26x2x7.yaml
+++ b/.github/workflows/examples-cc13x2x7_26x2x7.yaml
@@ -36,7 +36,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-ti:24
+            image: ghcr.io/project-chip/chip-build-ti:25
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
         steps:
diff --git a/.github/workflows/examples-cc32xx.yaml b/.github/workflows/examples-cc32xx.yaml
index f45559e5d173f2..5e8ac6d3f5809d 100644
--- a/.github/workflows/examples-cc32xx.yaml
+++ b/.github/workflows/examples-cc32xx.yaml
@@ -37,7 +37,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-ti:24
+            image: ghcr.io/project-chip/chip-build-ti:25
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
         steps:
diff --git a/.github/workflows/examples-efr32.yaml b/.github/workflows/examples-efr32.yaml
index c4d29e501a62c7..65cec1c0fc5200 100644
--- a/.github/workflows/examples-efr32.yaml
+++ b/.github/workflows/examples-efr32.yaml
@@ -38,7 +38,7 @@ jobs:
     if: github.actor != 'restyled-io[bot]'
 
     container:
-      image: ghcr.io/project-chip/chip-build-efr32:24
+      image: ghcr.io/project-chip/chip-build-efr32:25
       volumes:
         - "/tmp/bloat_reports:/tmp/bloat_reports"
     steps:
diff --git a/.github/workflows/examples-esp32.yaml b/.github/workflows/examples-esp32.yaml
index 111c28ccfd2d10..11a808306a33e9 100644
--- a/.github/workflows/examples-esp32.yaml
+++ b/.github/workflows/examples-esp32.yaml
@@ -34,7 +34,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-esp32:24
+            image: ghcr.io/project-chip/chip-build-esp32:25
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
 
@@ -130,7 +130,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-esp32:24
+            image: ghcr.io/project-chip/chip-build-esp32:25
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
 
diff --git a/.github/workflows/examples-infineon.yaml b/.github/workflows/examples-infineon.yaml
index f225a4fba5867f..783d13352aa8c8 100644
--- a/.github/workflows/examples-infineon.yaml
+++ b/.github/workflows/examples-infineon.yaml
@@ -35,7 +35,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-infineon:24
+            image: ghcr.io/project-chip/chip-build-infineon:25
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
         steps:
diff --git a/.github/workflows/examples-k32w.yaml b/.github/workflows/examples-k32w.yaml
index 58e366b6cfeca5..53bfc177199839 100644
--- a/.github/workflows/examples-k32w.yaml
+++ b/.github/workflows/examples-k32w.yaml
@@ -37,7 +37,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-k32w:24
+            image: ghcr.io/project-chip/chip-build-k32w:25
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
         steps:
diff --git a/.github/workflows/examples-linux-arm.yaml b/.github/workflows/examples-linux-arm.yaml
index f0f62060f0930e..589069998d6e69 100644
--- a/.github/workflows/examples-linux-arm.yaml
+++ b/.github/workflows/examples-linux-arm.yaml
@@ -34,7 +34,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-crosscompile:24
+            image: ghcr.io/project-chip/chip-build-crosscompile:25
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
 
diff --git a/.github/workflows/examples-linux-imx.yaml b/.github/workflows/examples-linux-imx.yaml
index d64409d1146a66..69b64649d20451 100644
--- a/.github/workflows/examples-linux-imx.yaml
+++ b/.github/workflows/examples-linux-imx.yaml
@@ -34,7 +34,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-imx:24
+            image: ghcr.io/project-chip/chip-build-imx:25
 
         steps:
             - name: Checkout
diff --git a/.github/workflows/examples-linux-standalone.yaml b/.github/workflows/examples-linux-standalone.yaml
index 98061009dc4fd9..76391d188a219c 100644
--- a/.github/workflows/examples-linux-standalone.yaml
+++ b/.github/workflows/examples-linux-standalone.yaml
@@ -34,7 +34,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build:24
+            image: ghcr.io/project-chip/chip-build:25
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
 
diff --git a/.github/workflows/examples-mbed.yaml b/.github/workflows/examples-mbed.yaml
index 9863d8f3f89703..8d680b52bdb31f 100644
--- a/.github/workflows/examples-mbed.yaml
+++ b/.github/workflows/examples-mbed.yaml
@@ -40,7 +40,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-mbed-os:24
+            image: ghcr.io/project-chip/chip-build-mbed-os:25
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
 
diff --git a/.github/workflows/examples-mw320.yaml b/.github/workflows/examples-mw320.yaml
index 233a6f4fe9d540..16ac5114070c5e 100644
--- a/.github/workflows/examples-mw320.yaml
+++ b/.github/workflows/examples-mw320.yaml
@@ -37,7 +37,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build:24
+            image: ghcr.io/project-chip/chip-build:25
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
         steps:
diff --git a/.github/workflows/examples-nrfconnect.yaml b/.github/workflows/examples-nrfconnect.yaml
index 3c22eaa79a0825..dc09d6f433abba 100644
--- a/.github/workflows/examples-nrfconnect.yaml
+++ b/.github/workflows/examples-nrfconnect.yaml
@@ -37,7 +37,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-nrf-platform:24
+            image: ghcr.io/project-chip/chip-build-nrf-platform:25
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
 
diff --git a/.github/workflows/examples-openiotsdk.yaml b/.github/workflows/examples-openiotsdk.yaml
index 5dc15c4ca2ec62..a61d68d8d4f9e8 100644
--- a/.github/workflows/examples-openiotsdk.yaml
+++ b/.github/workflows/examples-openiotsdk.yaml
@@ -38,7 +38,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-openiotsdk:24
+            image: ghcr.io/project-chip/chip-build-openiotsdk:25
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
             options: --privileged
diff --git a/.github/workflows/examples-qpg.yaml b/.github/workflows/examples-qpg.yaml
index 0f950134d2ff45..a1bc1d47dffad4 100644
--- a/.github/workflows/examples-qpg.yaml
+++ b/.github/workflows/examples-qpg.yaml
@@ -37,7 +37,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build:24
+            image: ghcr.io/project-chip/chip-build:25
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
         steps:
diff --git a/.github/workflows/examples-stm32.yaml b/.github/workflows/examples-stm32.yaml
index 8f59b06aa50e4e..f9455c54b38d83 100644
--- a/.github/workflows/examples-stm32.yaml
+++ b/.github/workflows/examples-stm32.yaml
@@ -38,7 +38,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build:24
+            image: ghcr.io/project-chip/chip-build:25
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
         steps:
diff --git a/.github/workflows/examples-telink.yaml b/.github/workflows/examples-telink.yaml
index 994d6b5d78a325..92cb016442b6df 100644
--- a/.github/workflows/examples-telink.yaml
+++ b/.github/workflows/examples-telink.yaml
@@ -36,7 +36,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-telink:24
+            image: ghcr.io/project-chip/chip-build-telink:25
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
 
@@ -54,13 +54,16 @@ jobs:
               with:
                 gh-context: ${{ toJson(github) }}
 
-            - name: Build example Telink (B92) Air Quality Sensor App
+            # - name: Update Zephyr to specific revision (for developers purpose)
+            #   run: scripts/run_in_build_env.sh "python3 scripts/tools/telink/update_zephyr.py e6a32f41ccec55c2233631406842b71ff270089d"
+
+            - name: Build example Telink (B92 retention) Air Quality Sensor App
               run: |
                   ./scripts/run_in_build_env.sh \
-                    "./scripts/build/build_examples.py --target 'telink-tlsr9528a-air-quality-sensor' build"
+                    "./scripts/build/build_examples.py --target 'telink-tlsr9528a_retention-air-quality-sensor' build"
                   .environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \
-                    telink tlsr9528a air-quality-sensor-app \
-                    out/telink-tlsr9528a-air-quality-sensor/zephyr/zephyr.elf \
+                    telink tlsr9528a_retention air-quality-sensor-app \
+                    out/telink-tlsr9528a_retention-air-quality-sensor/zephyr/zephyr.elf \
                     /tmp/bloat_reports/
 
             - name: clean out build output
@@ -102,13 +105,13 @@ jobs:
             - name: clean out build output
               run: rm -rf ./out
 
-            - name: Build example Telink (B92) Contact Sensor App
+            - name: Build example Telink (B92 retention) Contact Sensor App
               run: |
                   ./scripts/run_in_build_env.sh \
-                    "./scripts/build/build_examples.py --target 'telink-tlsr9528a-contact-sensor' build"
+                    "./scripts/build/build_examples.py --target 'telink-tlsr9528a_retention-contact-sensor' build"
                   .environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \
-                    telink tlsr9528a contact-sensor-app \
-                    out/telink-tlsr9528a-contact-sensor/zephyr/zephyr.elf \
+                    telink tlsr9528a_retention contact-sensor-app \
+                    out/telink-tlsr9528a_retention-contact-sensor/zephyr/zephyr.elf \
                     /tmp/bloat_reports/
 
             - name: clean out build output
@@ -148,13 +151,13 @@ jobs:
             - name: clean out build output
               run: rm -rf ./out
 
-            - name: Build example Telink (B92) Lock App with DFU
+            - name: Build example Telink (B92 retention) Lock App with DFU
               run: |
                   ./scripts/run_in_build_env.sh \
-                    "./scripts/build/build_examples.py --target 'telink-tlsr9528a-lock-dfu' build"
+                    "./scripts/build/build_examples.py --target 'telink-tlsr9528a_retention-lock-dfu' build"
                   .environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \
-                    telink tlsr9528a lock-app-dfu \
-                    out/telink-tlsr9528a-lock-dfu/zephyr/zephyr.elf \
+                    telink tlsr9528a_retention lock-app-dfu \
+                    out/telink-tlsr9528a_retention-lock-dfu/zephyr/zephyr.elf \
                     /tmp/bloat_reports/
 
             - name: clean out build output
@@ -220,25 +223,25 @@ jobs:
             - name: clean out build output
               run: rm -rf ./out
 
-            - name: Build example Telink (B92) Smoke CO Alarm App
+            - name: Build example Telink (B92 retention) Smoke CO Alarm App
               run: |
                   ./scripts/run_in_build_env.sh \
-                    "./scripts/build/build_examples.py --target 'telink-tlsr9528a-smoke-co-alarm' build"
+                    "./scripts/build/build_examples.py --target 'telink-tlsr9528a_retention-smoke-co-alarm' build"
                   .environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \
-                    telink tlsr9528a smoke_co_alarm-app \
-                    out/telink-tlsr9528a-smoke-co-alarm/zephyr/zephyr.elf \
+                    telink tlsr9528a_retention smoke_co_alarm-app \
+                    out/telink-tlsr9528a_retention-smoke-co-alarm/zephyr/zephyr.elf \
                     /tmp/bloat_reports/
 
             - name: clean out build output
               run: rm -rf ./out
 
-            - name: Build example Telink (B92) Temperature Measurement App
+            - name: Build example Telink (B92 retention) Temperature Measurement App
               run: |
                   ./scripts/run_in_build_env.sh \
-                    "./scripts/build/build_examples.py --target 'telink-tlsr9528a-temperature-measurement' build"
+                    "./scripts/build/build_examples.py --target 'telink-tlsr9528a_retention-temperature-measurement' build"
                   .environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \
-                    telink tlsr9528a temperature-measurement-app \
-                    out/telink-tlsr9528a-temperature-measurement/zephyr/zephyr.elf \
+                    telink tlsr9528a_retention temperature-measurement-app \
+                    out/telink-tlsr9528a_retention-temperature-measurement/zephyr/zephyr.elf \
                     /tmp/bloat_reports/
 
             - name: clean out build output
diff --git a/.github/workflows/examples-tizen.yaml b/.github/workflows/examples-tizen.yaml
index f01153240ffac6..ed3886f31b2b43 100644
--- a/.github/workflows/examples-tizen.yaml
+++ b/.github/workflows/examples-tizen.yaml
@@ -34,7 +34,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-tizen:24
+            image: ghcr.io/project-chip/chip-build-tizen:25
             options: --user root
             volumes:
                 - "/tmp/bloat_reports:/tmp/bloat_reports"
diff --git a/.github/workflows/full-android.yaml b/.github/workflows/full-android.yaml
index 20ba8990ed93f0..d34876e1f5f4f4 100644
--- a/.github/workflows/full-android.yaml
+++ b/.github/workflows/full-android.yaml
@@ -36,7 +36,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-android:24
+            image: ghcr.io/project-chip/chip-build-android:25
             volumes:
                 - "/tmp/log_output:/tmp/test_logs"
 
diff --git a/.github/workflows/fuzzing-build.yaml b/.github/workflows/fuzzing-build.yaml
index adbe225b88fe4c..007fde6ec94a9a 100644
--- a/.github/workflows/fuzzing-build.yaml
+++ b/.github/workflows/fuzzing-build.yaml
@@ -33,7 +33,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build:24
+            image: ghcr.io/project-chip/chip-build:25
             volumes:
                 - "/tmp/log_output:/tmp/test_logs"
 
diff --git a/.github/workflows/java-tests.yaml b/.github/workflows/java-tests.yaml
index 9cd1dea0447d04..69d81fedb80224 100644
--- a/.github/workflows/java-tests.yaml
+++ b/.github/workflows/java-tests.yaml
@@ -40,7 +40,7 @@ jobs:
         runs-on: ubuntu-latest
 
         container:
-            image: ghcr.io/project-chip/chip-build-java:24
+            image: ghcr.io/project-chip/chip-build-java:25
             options: --privileged --sysctl "net.ipv6.conf.all.disable_ipv6=0
                 net.ipv4.conf.all.forwarding=0 net.ipv6.conf.all.forwarding=0"
 
diff --git a/.github/workflows/lint.yml b/.github/workflows/lint.yml
index 9db99f6461f459..1be3fe8d2a3c10 100644
--- a/.github/workflows/lint.yml
+++ b/.github/workflows/lint.yml
@@ -29,7 +29,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build:24
+            image: ghcr.io/project-chip/chip-build:25
 
         steps:
             - name: Checkout
diff --git a/.github/workflows/minimal-build.yaml b/.github/workflows/minimal-build.yaml
index ff520e9e308fca..82f6667c95f54d 100644
--- a/.github/workflows/minimal-build.yaml
+++ b/.github/workflows/minimal-build.yaml
@@ -31,7 +31,7 @@ jobs:
         runs-on: ubuntu-latest
 
         container:
-            image: ghcr.io/project-chip/chip-build-minimal:24
+            image: ghcr.io/project-chip/chip-build-minimal:25
 
         steps:
             - name: Checkout
diff --git a/.github/workflows/qemu.yaml b/.github/workflows/qemu.yaml
index 6a61aa520f6ce4..e1e221ab2d5b7e 100644
--- a/.github/workflows/qemu.yaml
+++ b/.github/workflows/qemu.yaml
@@ -38,7 +38,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-esp32-qemu:24
+            image: ghcr.io/project-chip/chip-build-esp32-qemu:25
             volumes:
                 - "/tmp/log_output:/tmp/test_logs"
 
@@ -76,7 +76,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-tizen-qemu:24
+            image: ghcr.io/project-chip/chip-build-tizen-qemu:25
             volumes:
                 - "/tmp/log_output:/tmp/test_logs"
 
diff --git a/.github/workflows/release_artifacts.yaml b/.github/workflows/release_artifacts.yaml
index dbe98f9666f6a6..c3feed075eb27e 100644
--- a/.github/workflows/release_artifacts.yaml
+++ b/.github/workflows/release_artifacts.yaml
@@ -32,7 +32,7 @@ jobs:
         runs-on: ubuntu-latest
 
         container:
-            image: ghcr.io/project-chip/chip-build-esp32:24
+            image: ghcr.io/project-chip/chip-build-esp32:25
 
         steps:
             - name: Checkout
@@ -68,7 +68,7 @@ jobs:
         runs-on: ubuntu-latest
 
         container:
-            image: ghcr.io/project-chip/chip-build-efr32:24
+            image: ghcr.io/project-chip/chip-build-efr32:25
         steps:
             - name: Checkout
               uses: actions/checkout@v4
diff --git a/.github/workflows/smoketest-android.yaml b/.github/workflows/smoketest-android.yaml
index 2ff570884f3a1c..969f6c6fd72da3 100644
--- a/.github/workflows/smoketest-android.yaml
+++ b/.github/workflows/smoketest-android.yaml
@@ -37,7 +37,7 @@ jobs:
         if: github.actor != 'restyled-io[bot]'
 
         container:
-            image: ghcr.io/project-chip/chip-build-android:24
+            image: ghcr.io/project-chip/chip-build-android:25
             volumes:
                 - "/tmp/log_output:/tmp/test_logs"
 
diff --git a/.github/workflows/tests.yaml b/.github/workflows/tests.yaml
index d610edef1dc623..2efb0dd3fb80ec 100644
--- a/.github/workflows/tests.yaml
+++ b/.github/workflows/tests.yaml
@@ -47,7 +47,7 @@ jobs:
         runs-on: ubuntu-latest
 
         container:
-            image: ghcr.io/project-chip/chip-build:24
+            image: ghcr.io/project-chip/chip-build:25
             options: --privileged --sysctl "net.ipv6.conf.all.disable_ipv6=0
                 net.ipv4.conf.all.forwarding=1 net.ipv6.conf.all.forwarding=1"
 
@@ -404,7 +404,7 @@ jobs:
         runs-on: ubuntu-latest
 
         container:
-            image: ghcr.io/project-chip/chip-build:24
+            image: ghcr.io/project-chip/chip-build:25
             options: --privileged --sysctl "net.ipv6.conf.all.disable_ipv6=0
                 net.ipv4.conf.all.forwarding=0 net.ipv6.conf.all.forwarding=0"
 
diff --git a/.github/workflows/unit_integration_test.yaml b/.github/workflows/unit_integration_test.yaml
index e3c39f21438aec..ae2bdb82fc0b65 100644
--- a/.github/workflows/unit_integration_test.yaml
+++ b/.github/workflows/unit_integration_test.yaml
@@ -37,7 +37,7 @@ jobs:
         runs-on: ubuntu-latest
 
         container:
-            image: ghcr.io/project-chip/chip-build:24
+            image: ghcr.io/project-chip/chip-build:25
             volumes:
                 - "/tmp/log_output:/tmp/test_logs"
             options: --privileged --sysctl "net.ipv6.conf.all.disable_ipv6=0 net.ipv4.conf.all.forwarding=1 net.ipv6.conf.all.forwarding=1"
diff --git a/.github/workflows/zap_regeneration.yaml b/.github/workflows/zap_regeneration.yaml
index 68b8782f576a43..02994409014617 100644
--- a/.github/workflows/zap_regeneration.yaml
+++ b/.github/workflows/zap_regeneration.yaml
@@ -30,7 +30,7 @@ jobs:
 
         runs-on: ubuntu-20.04
         container:
-            image: ghcr.io/project-chip/chip-build:24
+            image: ghcr.io/project-chip/chip-build:25
         defaults:
             run:
                 shell: sh
diff --git a/.github/workflows/zap_templates.yaml b/.github/workflows/zap_templates.yaml
index bf1e305c4c9d51..0747c1da0f877d 100644
--- a/.github/workflows/zap_templates.yaml
+++ b/.github/workflows/zap_templates.yaml
@@ -32,7 +32,7 @@ jobs:
 
         runs-on: ubuntu-20.04
         container:
-            image: ghcr.io/project-chip/chip-build:24
+            image: ghcr.io/project-chip/chip-build:25
         defaults:
             run:
                 shell: sh
diff --git a/config/telink/chip-module/CMakeLists.txt b/config/telink/chip-module/CMakeLists.txt
index e9d506e538f131..545074b0b928b3 100644
--- a/config/telink/chip-module/CMakeLists.txt
+++ b/config/telink/chip-module/CMakeLists.txt
@@ -143,10 +143,11 @@ set_property(GLOBAL APPEND PROPERTY ZEPHYR_INTERFACE_LIBS chip)
 # Define 'chip-ota-image' target for building CHIP OTA image
 # ==============================================================================
 
+string(REPLACE "_retention" "" BASE_BOARD ${BOARD})
 
 if(${TLNK_USB_DONGLE} MATCHES y)
-  if(EXISTS "${CHIP_ROOT}/src/platform/telink/${BOARD}_usb_boot.overlay")
-    set(USB_BOOT_DTC_OVERLAY_FILE "${CHIP_ROOT}/src/platform/telink/${BOARD}_usb_boot.overlay")
+  if(EXISTS "${CHIP_ROOT}/src/platform/telink/${BASE_BOARD}_usb_boot.overlay")
+    set(USB_BOOT_DTC_OVERLAY_FILE "${CHIP_ROOT}/src/platform/telink/${BASE_BOARD}_usb_boot.overlay")
   else()
     unset(USB_BOOT_DTC_OVERLAY_FILE)
   endif()
@@ -154,8 +155,8 @@ else()
   unset(USB_BOOT_DTC_OVERLAY_FILE)
 endif()
 
-if(EXISTS "${CHIP_ROOT}/src/platform/telink/${BOARD}.overlay")
-    set(GLOBAL_DTC_OVERLAY_FILE "${CHIP_ROOT}/src/platform/telink/${BOARD}.overlay")
+if(EXISTS "${CHIP_ROOT}/src/platform/telink/${BASE_BOARD}.overlay")
+    set(GLOBAL_DTC_OVERLAY_FILE "${CHIP_ROOT}/src/platform/telink/${BASE_BOARD}.overlay")
 else()
     unset(GLOBAL_DTC_OVERLAY_FILE)
 endif()
@@ -184,7 +185,7 @@ math(EXPR boot_blocks "${mcuboot_size} / ${BLOCK_SIZE}" OUTPUT_FORMAT DECIMAL)
 if (CONFIG_BOOTLOADER_MCUBOOT)
     add_custom_target(build_mcuboot ALL
         COMMAND
-        west build -b ${BOARD} -d build_mcuboot ${ZEPHYR_BASE}/../bootloader/mcuboot/boot/zephyr
+        west build -b ${BASE_BOARD} -d build_mcuboot ${ZEPHYR_BASE}/../bootloader/mcuboot/boot/zephyr
             -- -DOVERLAY_CONFIG=${GLOBAL_BOOTLOADER_CONF_OVERLAY_FILE} -DDTC_OVERLAY_FILE="${GLOBAL_DTC_OVERLAY_FILE};${FLASH_DTC_OVERLAY_FILE};${USB_BOOT_DTC_OVERLAY_FILE}"
         COMMAND
         cp ${PROJECT_BINARY_DIR}/../modules/chip-module/build_mcuboot/zephyr/zephyr.bin ${PROJECT_BINARY_DIR}/zephyr.mcuboot.bin
diff --git a/config/telink/chip-module/Kconfig.defaults b/config/telink/chip-module/Kconfig.defaults
index f346a2c1eeb807..54137bc281562b 100644
--- a/config/telink/chip-module/Kconfig.defaults
+++ b/config/telink/chip-module/Kconfig.defaults
@@ -64,7 +64,7 @@ config INIT_STACKS
     default y
 
 config IDLE_STACK_SIZE
-    default 387 if PM
+    default 512 if PM
 
 config ISR_STACK_SIZE
     default 502 if PM
@@ -73,7 +73,7 @@ config SYSTEM_WORKQUEUE_STACK_SIZE
     default 616 if PM
 
 config HEAP_MEM_POOL_SIZE
-    default 128 if PM
+    default 256
 
 config COMMON_LIBC_MALLOC_ARENA_SIZE 
     default 12288
@@ -98,6 +98,9 @@ config NET_BUF_TX_COUNT
     default 16 if PM
     default 32
 
+config GPIO
+    default y
+
 # Bluetooth Low Energy configs
 
 config BT
@@ -154,6 +157,24 @@ choice B9X_BLE_CTRL_MAC_TYPE
     default B9X_BLE_CTRL_MAC_TYPE_RANDOM_STATIC
 endchoice
 
+# Board retention config
+if BOARD_TLSR9528A_RETENTION || BOARD_TLSR9518ADK80D_RETENTION
+config BOARD_TLSR9X_NON_RETENTION_RAM_CODE
+    default y if PM
+
+config TELINK_B9x_MATTER_RETENTION_LAYOUT
+    default y if PM
+
+config PWM
+    default n
+endif
+
+# Board non-retention config
+if BOARD_TLSR9528A || BOARD_TLSR9518ADK80D
+config PWM
+    default y
+endif
+
 # Config dynamic interrupts to have posibility to switch between BLE/Thread radio drivers
 config DYNAMIC_INTERRUPTS
     default y
diff --git a/examples/air-quality-sensor-app/telink/prj.conf b/examples/air-quality-sensor-app/telink/prj.conf
index 703e78efb7ed4a..b43fbe9636d9aa 100644
--- a/examples/air-quality-sensor-app/telink/prj.conf
+++ b/examples/air-quality-sensor-app/telink/prj.conf
@@ -22,12 +22,6 @@
 CONFIG_CHIP=y
 CONFIG_STD_CPP17=y
 
-# enable GPIO
-CONFIG_GPIO=y
-
-# enable PWM
-CONFIG_PWM=y
-
 # CHIP configuration
 CONFIG_CHIP_PROJECT_CONFIG="include/CHIPProjectConfig.h"
 CONFIG_CHIP_OPENTHREAD_CONFIG="../../platform/telink/project_include/OpenThreadConfig.h"
diff --git a/examples/all-clusters-app/ameba/README.md b/examples/all-clusters-app/ameba/README.md
index 139512593a0fef..8bd7bb532fcb89 100644
--- a/examples/all-clusters-app/ameba/README.md
+++ b/examples/all-clusters-app/ameba/README.md
@@ -27,11 +27,11 @@ The CHIP demo application is supported on
 
 -   Pull docker image:
 
-          $ docker pull ghcr.io/project-chip/chip-build-ameba:24
+          $ docker pull ghcr.io/project-chip/chip-build-ameba:25
 
 -   Run docker container:
 
-          $ docker run -it -v ${CHIP_DIR}:/root/chip ghcr.io/project-chip/chip-build-ameba:24
+          $ docker run -it -v ${CHIP_DIR}:/root/chip ghcr.io/project-chip/chip-build-ameba:25
 
 -   Setup build environment:
 
diff --git a/examples/all-clusters-app/telink/prj.conf b/examples/all-clusters-app/telink/prj.conf
index f0e82ad971d4d8..18b7edcc11f395 100644
--- a/examples/all-clusters-app/telink/prj.conf
+++ b/examples/all-clusters-app/telink/prj.conf
@@ -22,12 +22,6 @@
 CONFIG_CHIP=y
 CONFIG_STD_CPP17=y
 
-# enable GPIO
-CONFIG_GPIO=y
-
-# enable PWM
-CONFIG_PWM=y
-
 # CHIP configuration
 CONFIG_CHIP_PROJECT_CONFIG="include/CHIPProjectConfig.h"
 CONFIG_CHIP_OPENTHREAD_CONFIG="../../platform/telink/project_include/OpenThreadConfig.h"
diff --git a/examples/all-clusters-minimal-app/ameba/README.md b/examples/all-clusters-minimal-app/ameba/README.md
index 1583fe5fccea87..1735aa5530ac03 100644
--- a/examples/all-clusters-minimal-app/ameba/README.md
+++ b/examples/all-clusters-minimal-app/ameba/README.md
@@ -27,13 +27,13 @@ The CHIP demo application is supported on
 -   Pull docker image:
 
           ```
-          $ docker pull ghcr.io/project-chip/chip-build-ameba:24
+          $ docker pull ghcr.io/project-chip/chip-build-ameba:25
           ```
 
 -   Run docker container:
 
           ```
-          $ docker run -it -v ${CHIP_DIR}:/root/chip ghcr.io/project-chip/chip-build-ameba:24
+          $ docker run -it -v ${CHIP_DIR}:/root/chip ghcr.io/project-chip/chip-build-ameba:25
           ```
 
 -   Setup build environment:
diff --git a/examples/bridge-app/telink/prj.conf b/examples/bridge-app/telink/prj.conf
index c6365484b80b22..fba10bf033c9e7 100644
--- a/examples/bridge-app/telink/prj.conf
+++ b/examples/bridge-app/telink/prj.conf
@@ -22,12 +22,6 @@
 CONFIG_CHIP=y
 CONFIG_STD_CPP17=y
 
-# enable GPIO
-CONFIG_GPIO=y
-
-# enable PWM
-CONFIG_PWM=y
-
 # CHIP configuration
 CONFIG_CHIP_PROJECT_CONFIG="include/CHIPProjectConfig.h"
 CONFIG_CHIP_OPENTHREAD_CONFIG="../../platform/telink/project_include/OpenThreadConfig.h"
diff --git a/examples/chef/telink/prj.conf b/examples/chef/telink/prj.conf
index 9b99b6a3fcc40c..5fdb2805860a94 100755
--- a/examples/chef/telink/prj.conf
+++ b/examples/chef/telink/prj.conf
@@ -22,12 +22,6 @@
 CONFIG_CHIP=y
 CONFIG_STD_CPP17=y
 
-# enable GPIO
-CONFIG_GPIO=y
-
-# enable PWM
-CONFIG_PWM=y
-
 # CHIP configuration
 CONFIG_CHIP_PROJECT_CONFIG="CHIPProjectConfig.h"
 CONFIG_CHIP_OPENTHREAD_CONFIG="../../platform/telink/project_include/OpenThreadConfig.h"
diff --git a/examples/contact-sensor-app/telink/prj.conf b/examples/contact-sensor-app/telink/prj.conf
index 8eea50ee19b9e4..eefe9b944c8331 100755
--- a/examples/contact-sensor-app/telink/prj.conf
+++ b/examples/contact-sensor-app/telink/prj.conf
@@ -22,12 +22,6 @@
 CONFIG_CHIP=y
 CONFIG_STD_CPP17=y
 
-# enable GPIO
-CONFIG_GPIO=y
-
-# enable PWM
-CONFIG_PWM=y
-
 # CHIP configuration
 CONFIG_CHIP_PROJECT_CONFIG="include/CHIPProjectConfig.h"
 CONFIG_CHIP_OPENTHREAD_CONFIG="../../platform/telink/project_include/OpenThreadConfig.h"
diff --git a/examples/light-switch-app/ameba/README.md b/examples/light-switch-app/ameba/README.md
index 48ab417a33dff5..5fc2a3a587abb0 100644
--- a/examples/light-switch-app/ameba/README.md
+++ b/examples/light-switch-app/ameba/README.md
@@ -26,11 +26,11 @@ The CHIP demo application is supported on
 
 -   Pull docker image:
 
-          $ docker pull ghcr.io/project-chip/chip-build-ameba:24
+          $ docker pull ghcr.io/project-chip/chip-build-ameba:25
 
 -   Run docker container:
 
-          $ docker run -it -v ${CHIP_DIR}:/root/chip ghcr.io/project-chip/chip-build-ameba:24
+          $ docker run -it -v ${CHIP_DIR}:/root/chip ghcr.io/project-chip/chip-build-ameba:25
 
 -   Setup build environment:
 
diff --git a/examples/light-switch-app/telink/prj.conf b/examples/light-switch-app/telink/prj.conf
index 184e824904c519..ebb196bb76980f 100755
--- a/examples/light-switch-app/telink/prj.conf
+++ b/examples/light-switch-app/telink/prj.conf
@@ -22,12 +22,6 @@
 CONFIG_CHIP=y
 CONFIG_STD_CPP17=y
 
-# enable GPIO
-CONFIG_GPIO=y
-
-# enable PWM
-CONFIG_PWM=y
-
 # CHIP configuration
 CONFIG_CHIP_PROJECT_CONFIG="include/CHIPProjectConfig.h"
 CONFIG_CHIP_OPENTHREAD_CONFIG="../../platform/telink/project_include/OpenThreadConfig.h"
diff --git a/examples/light-switch-app/telink/src/AppTask.cpp b/examples/light-switch-app/telink/src/AppTask.cpp
index 1a21866cf6bd6b..39b92cca42519d 100644
--- a/examples/light-switch-app/telink/src/AppTask.cpp
+++ b/examples/light-switch-app/telink/src/AppTask.cpp
@@ -45,6 +45,8 @@ void AppTask::SwitchActionEventHandler(AppEvent * aEvent)
 {
     if (aEvent->Type == AppEvent::kEventType_Button)
     {
+        LOG_INF("App button pressed");
+
         BindingCommandData * data = chip::Platform::New<BindingCommandData>();
         data->commandId           = chip::app::Clusters::OnOff::Commands::Toggle::Id;
         data->clusterId           = chip::app::Clusters::OnOff::Id;
diff --git a/examples/lighting-app/ameba/README.md b/examples/lighting-app/ameba/README.md
index 9c7b13ffa22838..c5d897463b3bd4 100644
--- a/examples/lighting-app/ameba/README.md
+++ b/examples/lighting-app/ameba/README.md
@@ -23,11 +23,11 @@ The CHIP demo application is supported on
 
 -   Pull docker image:
 
-          $ docker pull ghcr.io/project-chip/chip-build-ameba:24
+          $ docker pull ghcr.io/project-chip/chip-build-ameba:25
 
 -   Run docker container:
 
-          $ docker run -it -v ${CHIP_DIR}:/root/chip ghcr.io/project-chip/chip-build-ameba:24
+          $ docker run -it -v ${CHIP_DIR}:/root/chip ghcr.io/project-chip/chip-build-ameba:25
 
 -   Setup build environment:
 
diff --git a/examples/lighting-app/telink/prj.conf b/examples/lighting-app/telink/prj.conf
index 0c71925928bec0..566c993ee92dca 100644
--- a/examples/lighting-app/telink/prj.conf
+++ b/examples/lighting-app/telink/prj.conf
@@ -22,12 +22,6 @@
 CONFIG_CHIP=y
 CONFIG_STD_CPP17=y
 
-# enable GPIO
-CONFIG_GPIO=y
-
-# enable PWM
-CONFIG_PWM=y
-
 # CHIP configuration
 CONFIG_CHIP_PROJECT_CONFIG="include/CHIPProjectConfig.h"
 CONFIG_CHIP_OPENTHREAD_CONFIG="../../platform/telink/project_include/OpenThreadConfig.h"
diff --git a/examples/lock-app/telink/prj.conf b/examples/lock-app/telink/prj.conf
index 7b160ed7259367..738b4090c8be80 100755
--- a/examples/lock-app/telink/prj.conf
+++ b/examples/lock-app/telink/prj.conf
@@ -22,12 +22,6 @@
 CONFIG_CHIP=y
 CONFIG_STD_CPP17=y
 
-# enable GPIO
-CONFIG_GPIO=y
-
-# enable PWM
-CONFIG_PWM=y
-
 # CHIP configuration
 CONFIG_CHIP_PROJECT_CONFIG="include/CHIPProjectConfig.h"
 CONFIG_CHIP_OPENTHREAD_CONFIG="../../platform/telink/project_include/OpenThreadConfig.h"
diff --git a/examples/ota-requestor-app/ameba/README.md b/examples/ota-requestor-app/ameba/README.md
index 8f701e2ba6952c..8b45d61e1bae74 100644
--- a/examples/ota-requestor-app/ameba/README.md
+++ b/examples/ota-requestor-app/ameba/README.md
@@ -6,11 +6,11 @@ A prototype application that demonstrates OTA Requestor capabilities.
 
 -   Pull docker image:
 
-          $ docker pull ghcr.io/project-chip/chip-build-ameba:24
+          $ docker pull ghcr.io/project-chip/chip-build-ameba:25
 
 -   Run docker container:
 
-          $ docker run -it -v ${CHIP_DIR}:/root/chip ghcr.io/project-chip/chip-build-ameba:24
+          $ docker run -it -v ${CHIP_DIR}:/root/chip ghcr.io/project-chip/chip-build-ameba:25
 
 -   Setup build environment:
 
diff --git a/examples/ota-requestor-app/telink/prj.conf b/examples/ota-requestor-app/telink/prj.conf
index 82f29519af3bcb..9538841fbc7230 100755
--- a/examples/ota-requestor-app/telink/prj.conf
+++ b/examples/ota-requestor-app/telink/prj.conf
@@ -22,12 +22,6 @@
 CONFIG_CHIP=y
 CONFIG_STD_CPP17=y
 
-# enable GPIO
-CONFIG_GPIO=y
-
-# enable PWM
-CONFIG_PWM=y
-
 # CHIP configuration
 CONFIG_CHIP_PROJECT_CONFIG="include/CHIPProjectConfig.h"
 CONFIG_CHIP_OPENTHREAD_CONFIG="../../platform/telink/project_include/OpenThreadConfig.h"
diff --git a/examples/pigweed-app/ameba/README.md b/examples/pigweed-app/ameba/README.md
index f115117d3db775..18fc33513d1348 100644
--- a/examples/pigweed-app/ameba/README.md
+++ b/examples/pigweed-app/ameba/README.md
@@ -31,11 +31,11 @@ following features are available:
 
 -   Pull docker image:
 
-          $ docker pull ghcr.io/project-chip/chip-build-ameba:24
+          $ docker pull ghcr.io/project-chip/chip-build-ameba:25
 
 -   Run docker container:
 
-          $ docker run -it -v ${CHIP_DIR}:/root/chip ghcr.io/project-chip/chip-build-ameba:24
+          $ docker run -it -v ${CHIP_DIR}:/root/chip ghcr.io/project-chip/chip-build-ameba:25
 
 -   Setup build environment:
 
diff --git a/examples/platform/telink/common/include/AppTaskCommon.h b/examples/platform/telink/common/include/AppTaskCommon.h
index 6652a55210f601..e0b344df5b6ec1 100644
--- a/examples/platform/telink/common/include/AppTaskCommon.h
+++ b/examples/platform/telink/common/include/AppTaskCommon.h
@@ -103,7 +103,7 @@ class AppTaskCommon
     static void StartBleAdvHandler(AppEvent * aEvent);
 #endif
 
-#if APP_USE_THREAD_START_BUTTON
+#if APP_USE_THREAD_START_BUTTON || !CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE
     static void StartThreadButtonEventHandler(void);
     static void StartThreadHandler(AppEvent * aEvent);
 #endif
diff --git a/examples/platform/telink/common/src/AppTaskCommon.cpp b/examples/platform/telink/common/src/AppTaskCommon.cpp
index 0731410dfe07da..d2aa42bfdeb258 100644
--- a/examples/platform/telink/common/src/AppTaskCommon.cpp
+++ b/examples/platform/telink/common/src/AppTaskCommon.cpp
@@ -73,7 +73,7 @@ constexpr uint32_t kIdentifyFinishOffRateMs     = 50;
 constexpr uint32_t kIdentifyChannelChangeRateMs = 1000;
 constexpr uint32_t kIdentifyBreatheRateMs       = 1000;
 
-const struct pwm_dt_spec sPwmIdentifySpecGreenLed = PWM_DT_SPEC_GET(DT_ALIAS(pwm_led3));
+const struct pwm_dt_spec sPwmIdentifySpecGreenLed = PWM_DT_SPEC_GET_OR(DT_ALIAS(pwm_led3), {});
 #endif
 
 #if APP_SET_NETWORK_COMM_ENDPOINT_SEC
@@ -140,11 +140,13 @@ class AppCallbacks : public AppDelegate
     void OnCommissioningSessionStarted() override { isComissioningStarted = true; }
     void OnCommissioningSessionStopped() override { isComissioningStarted = false; }
     void OnCommissioningSessionEstablishmentError(CHIP_ERROR err) override { sIsCommissioningFailed = true; }
+#if CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE
     void OnCommissioningWindowClosed() override
     {
         if (!isComissioningStarted)
             chip::DeviceLayer::Internal::BLEMgr().Shutdown();
     }
+#endif
 };
 
 AppCallbacks sCallbacks;
@@ -240,6 +242,10 @@ CHIP_ERROR AppTaskCommon::StartApp(void)
 
     AppEvent event = {};
 
+#if !CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE
+    StartThreadButtonEventHandler();
+#endif
+
     while (true)
     {
         GetEvent(&event);
@@ -255,7 +261,7 @@ CHIP_ERROR AppTaskCommon::InitCommonParts(void)
     // Initialize status LED
 #if CONFIG_CHIP_ENABLE_APPLICATION_STATUS_LED
     LEDWidget::SetStateUpdateCallback(LEDStateUpdateHandler);
-    sStatusLED.Init(GPIO_DT_SPEC_GET(DT_ALIAS(system_state_led), gpios));
+    sStatusLED.Init(GPIO_DT_SPEC_GET_OR(DT_ALIAS(system_state_led), gpios, {}));
 
     UpdateStatusLED();
 #endif
@@ -611,7 +617,7 @@ void AppTaskCommon::FactoryResetTimerEventHandler(AppEvent * aEvent)
     LOG_INF("Factory Reset Trigger Counter is cleared");
 }
 
-#if APP_USE_THREAD_START_BUTTON
+#if APP_USE_THREAD_START_BUTTON || !CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE
 void AppTaskCommon::StartThreadButtonEventHandler(void)
 {
     AppEvent event;
@@ -628,8 +634,13 @@ void AppTaskCommon::StartThreadHandler(AppEvent * aEvent)
     if (!chip::DeviceLayer::ConnectivityMgr().IsThreadProvisioned())
     {
         // Switch context from BLE to Thread
+#if CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE
         Internal::BLEManagerImpl sInstance;
         sInstance.SwitchToIeee802154();
+#else
+        ThreadStackMgrImpl().SetRadioBlocked(false);
+        ThreadStackMgrImpl().SetThreadEnabled(true);
+#endif
         StartDefaultThreadNetwork();
     }
     else
diff --git a/examples/platform/telink/util/src/LEDWidget.cpp b/examples/platform/telink/util/src/LEDWidget.cpp
index 0ea31d5d1b9eee..9db20104b6a69b 100644
--- a/examples/platform/telink/util/src/LEDWidget.cpp
+++ b/examples/platform/telink/util/src/LEDWidget.cpp
@@ -38,10 +38,17 @@ void LEDWidget::Init(gpio_dt_spec gpio)
     mGPIO           = gpio;
     mState          = false;
 
-    int ret = gpio_pin_configure_dt(&mGPIO, GPIO_OUTPUT_ACTIVE);
-    if (ret < 0)
+    if (!gpio_is_ready_dt(&mGPIO))
+    {
+        LOG_ERR("GPIO device not ready");
+    }
+    else
     {
-        LOG_ERR("GPIO pin %d configure - fail. Status%d\n", mGPIO.pin, ret);
+        int ret = gpio_pin_configure_dt(&mGPIO, GPIO_OUTPUT_ACTIVE);
+        if (ret < 0)
+        {
+            LOG_ERR("GPIO pin %d configure - fail. Status%d\n", mGPIO.pin, ret);
+        }
     }
 
     k_timer_init(&mLedTimer, &LEDWidget::LedStateTimerHandler, nullptr);
@@ -88,6 +95,10 @@ void LEDWidget::ScheduleStateChange()
 
 void LEDWidget::DoSet(bool state)
 {
+    if (!gpio_is_ready_dt(&mGPIO))
+    {
+        return;
+    }
     mState  = state;
     int ret = gpio_pin_set_dt(&mGPIO, state);
     if (ret < 0)
diff --git a/examples/platform/telink/util/src/PWMDevice.cpp b/examples/platform/telink/util/src/PWMDevice.cpp
index 3bdc8509cb0afa..b77126b2b7b802 100644
--- a/examples/platform/telink/util/src/PWMDevice.cpp
+++ b/examples/platform/telink/util/src/PWMDevice.cpp
@@ -44,8 +44,7 @@ CHIP_ERROR PWMDevice::Init(const pwm_dt_spec * pwmDevice, uint8_t aMinLevel, uin
 
     if (!device_is_ready(mPwmDevice->dev))
     {
-        LOG_ERR("PWM device %s is not ready", mPwmDevice->dev->name);
-        return CHIP_ERROR_INCORRECT_STATE;
+        LOG_ERR("PWM device %s is not ready", mPwmDevice->dev ? mPwmDevice->dev->name : "N/A");
     }
 
     k_timer_init(&mPwmLedTimer, &PWMDevice::PwmLedTimerHandler, nullptr);
@@ -134,6 +133,10 @@ void PWMDevice::Set(bool aOn)
 
 void PWMDevice::UpdateLight(void)
 {
+    if (!device_is_ready(mPwmDevice->dev))
+    {
+        return;
+    }
     constexpr uint32_t kPwmWidthUs  = 20000u;
     const uint8_t maxEffectiveLevel = mMaxLevel - mMinLevel;
     const uint8_t effectiveLevel    = mState == kState_On ? chip::min<uint8_t>(mLevel - mMinLevel, maxEffectiveLevel) : 0;
diff --git a/examples/pump-app/telink/prj.conf b/examples/pump-app/telink/prj.conf
index 3c0fd17786ef74..13eb622c61a548 100755
--- a/examples/pump-app/telink/prj.conf
+++ b/examples/pump-app/telink/prj.conf
@@ -22,12 +22,6 @@
 CONFIG_CHIP=y
 CONFIG_STD_CPP17=y
 
-# enable GPIO
-CONFIG_GPIO=y
-
-# enable PWM
-CONFIG_PWM=y
-
 # CHIP configuration
 CONFIG_CHIP_PROJECT_CONFIG="include/CHIPProjectConfig.h"
 CONFIG_CHIP_OPENTHREAD_CONFIG="../../platform/telink/project_include/OpenThreadConfig.h"
diff --git a/examples/pump-controller-app/telink/prj.conf b/examples/pump-controller-app/telink/prj.conf
index 2d4670fa37ebd8..3b647100515c62 100755
--- a/examples/pump-controller-app/telink/prj.conf
+++ b/examples/pump-controller-app/telink/prj.conf
@@ -22,12 +22,6 @@
 CONFIG_CHIP=y
 CONFIG_STD_CPP17=y
 
-# enable GPIO
-CONFIG_GPIO=y
-
-# enable PWM
-CONFIG_PWM=y
-
 # CHIP configuration
 CONFIG_CHIP_PROJECT_CONFIG="include/CHIPProjectConfig.h"
 CONFIG_CHIP_OPENTHREAD_CONFIG="../../platform/telink/project_include/OpenThreadConfig.h"
diff --git a/examples/resource-monitoring-app/telink/prj.conf b/examples/resource-monitoring-app/telink/prj.conf
index 3996237b452b6b..5fdb933b8ff327 100644
--- a/examples/resource-monitoring-app/telink/prj.conf
+++ b/examples/resource-monitoring-app/telink/prj.conf
@@ -22,12 +22,6 @@
 CONFIG_CHIP=y
 CONFIG_STD_CPP17=y
 
-# enable GPIO
-CONFIG_GPIO=y
-
-# enable PWM
-CONFIG_PWM=y
-
 # CHIP configuration
 CONFIG_CHIP_PROJECT_CONFIG="include/CHIPProjectConfig.h"
 CONFIG_CHIP_OPENTHREAD_CONFIG="../../platform/telink/project_include/OpenThreadConfig.h"
diff --git a/examples/shell/telink/prj.conf b/examples/shell/telink/prj.conf
index 88846b63b4aa15..ef57656abeeb61 100755
--- a/examples/shell/telink/prj.conf
+++ b/examples/shell/telink/prj.conf
@@ -22,12 +22,6 @@
 CONFIG_CHIP=y
 CONFIG_STD_CPP17=y
 
-# enable GPIO
-CONFIG_GPIO=y
-
-# enable PWM
-CONFIG_PWM=y
-
 # CHIP configuration
 CONFIG_CHIP_PROJECT_CONFIG="include/CHIPProjectConfig.h"
 CONFIG_CHIP_OPENTHREAD_CONFIG="../../platform/telink/project_include/OpenThreadConfig.h"
diff --git a/examples/smoke-co-alarm-app/telink/prj.conf b/examples/smoke-co-alarm-app/telink/prj.conf
index 299d79337065fe..36f00385d93d53 100755
--- a/examples/smoke-co-alarm-app/telink/prj.conf
+++ b/examples/smoke-co-alarm-app/telink/prj.conf
@@ -22,12 +22,6 @@
 CONFIG_CHIP=y
 CONFIG_STD_CPP17=y
 
-# enable GPIO
-CONFIG_GPIO=y
-
-# enable PWM
-CONFIG_PWM=y
-
 # CHIP configuration
 CONFIG_CHIP_PROJECT_CONFIG="include/CHIPProjectConfig.h"
 CONFIG_CHIP_OPENTHREAD_CONFIG="../../platform/telink/project_include/OpenThreadConfig.h"
diff --git a/examples/temperature-measurement-app/telink/prj.conf b/examples/temperature-measurement-app/telink/prj.conf
index 9aabed07aa7a4a..01222e4cb6ec07 100644
--- a/examples/temperature-measurement-app/telink/prj.conf
+++ b/examples/temperature-measurement-app/telink/prj.conf
@@ -22,12 +22,6 @@
 CONFIG_CHIP=y
 CONFIG_STD_CPP17=y
 
-# enable GPIO
-CONFIG_GPIO=y
-
-# enable PWM
-CONFIG_PWM=y
-
 # CHIP configuration
 CONFIG_CHIP_PROJECT_CONFIG="include/CHIPProjectConfig.h"
 CONFIG_CHIP_OPENTHREAD_CONFIG="../../platform/telink/project_include/OpenThreadConfig.h"
diff --git a/examples/thermostat/telink/prj.conf b/examples/thermostat/telink/prj.conf
index 70cb272b0da9c8..bc7cd3bd75cb38 100755
--- a/examples/thermostat/telink/prj.conf
+++ b/examples/thermostat/telink/prj.conf
@@ -22,12 +22,6 @@
 CONFIG_CHIP=y
 CONFIG_STD_CPP17=y
 
-# enable GPIO
-CONFIG_GPIO=y
-
-# enable PWM
-CONFIG_PWM=y
-
 # CHIP configuration
 CONFIG_CHIP_PROJECT_CONFIG="include/CHIPProjectConfig.h"
 CONFIG_CHIP_OPENTHREAD_CONFIG="../../platform/telink/project_include/OpenThreadConfig.h"
diff --git a/examples/window-app/telink/prj.conf b/examples/window-app/telink/prj.conf
index 23eba6ddd4aaec..8c44d9f0c8fe36 100644
--- a/examples/window-app/telink/prj.conf
+++ b/examples/window-app/telink/prj.conf
@@ -22,12 +22,6 @@
 CONFIG_CHIP=y
 CONFIG_STD_CPP17=y
 
-# enable GPIO
-CONFIG_GPIO=y
-
-# enable PWM
-CONFIG_PWM=y
-
 # CHIP configuration
 CONFIG_CHIP_PROJECT_CONFIG="include/CHIPProjectConfig.h"
 CONFIG_CHIP_OPENTHREAD_CONFIG="../../platform/telink/project_include/OpenThreadConfig.h"
diff --git a/integrations/cloudbuild/build-all.yaml b/integrations/cloudbuild/build-all.yaml
index 58df032c9804ef..1524312420e11f 100644
--- a/integrations/cloudbuild/build-all.yaml
+++ b/integrations/cloudbuild/build-all.yaml
@@ -6,7 +6,7 @@ steps:
           - "--init"
           - "--recursive"
       id: Submodules
-    - name: "ghcr.io/project-chip/chip-build-vscode:24"
+    - name: "ghcr.io/project-chip/chip-build-vscode:25"
       env:
           - PW_ENVIRONMENT_ROOT=/pwenv
       args:
@@ -21,7 +21,7 @@ steps:
             path: /pwenv
       timeout: 900s
 
-    - name: "ghcr.io/project-chip/chip-build-vscode:24"
+    - name: "ghcr.io/project-chip/chip-build-vscode:25"
       env:
           - PW_ENVIRONMENT_ROOT=/pwenv
       args:
@@ -85,7 +85,7 @@ steps:
               --target k32w-shell
               build
               --create-archives /workspace/artifacts/
-    - name: "ghcr.io/project-chip/chip-build-vscode:24"
+    - name: "ghcr.io/project-chip/chip-build-vscode:25"
       env:
           - PW_ENVIRONMENT_ROOT=/pwenv
       args:
@@ -164,6 +164,7 @@ steps:
               --target qpg-qpg6105-shell
               --target telink-tlsr9518adk80d-light
               --target telink-tlsr9528a-light
+              --target telink-tlsr9528a_retention-light-switch
               --target tizen-arm-light
               build
               --create-archives /workspace/artifacts/
diff --git a/integrations/cloudbuild/chef.yaml b/integrations/cloudbuild/chef.yaml
index 096a8833b13cf5..be406882ad733f 100644
--- a/integrations/cloudbuild/chef.yaml
+++ b/integrations/cloudbuild/chef.yaml
@@ -1,5 +1,5 @@
 steps:
-    - name: "ghcr.io/project-chip/chip-build-vscode:24"
+    - name: "ghcr.io/project-chip/chip-build-vscode:25"
       env:
           - PW_ENVIRONMENT_ROOT=/pwenv
       args:
@@ -12,7 +12,7 @@ steps:
             path: /pwenv
       timeout: 2700s
 
-    - name: "ghcr.io/project-chip/chip-build-vscode:24"
+    - name: "ghcr.io/project-chip/chip-build-vscode:25"
       env:
           - PW_ENVIRONMENT_ROOT=/pwenv
       args:
@@ -27,7 +27,7 @@ steps:
           - name: pwenv
             path: /pwenv
 
-    - name: "ghcr.io/project-chip/chip-build-vscode:24"
+    - name: "ghcr.io/project-chip/chip-build-vscode:25"
       env:
           - PW_ENVIRONMENT_ROOT=/pwenv
       args:
diff --git a/integrations/cloudbuild/smoke-test.yaml b/integrations/cloudbuild/smoke-test.yaml
index 3c1c56bfeec5cc..b7f517c78bbc31 100644
--- a/integrations/cloudbuild/smoke-test.yaml
+++ b/integrations/cloudbuild/smoke-test.yaml
@@ -1,5 +1,5 @@
 steps:
-    - name: "ghcr.io/project-chip/chip-build-vscode:24"
+    - name: "ghcr.io/project-chip/chip-build-vscode:25"
       entrypoint: "bash"
       args:
           - "-c"
@@ -7,7 +7,7 @@ steps:
               git config --global --add safe.directory "*"
               git submodule update --init --recursive
       id: Submodules
-    - name: "ghcr.io/project-chip/chip-build-vscode:24"
+    - name: "ghcr.io/project-chip/chip-build-vscode:25"
       env:
           - PW_ENVIRONMENT_ROOT=/pwenv
       args:
@@ -22,7 +22,7 @@ steps:
             path: /pwenv
       timeout: 900s
 
-    - name: "ghcr.io/project-chip/chip-build-vscode:24"
+    - name: "ghcr.io/project-chip/chip-build-vscode:25"
       id: ESP32
       env:
           - PW_ENVIRONMENT_ROOT=/pwenv
@@ -43,7 +43,7 @@ steps:
       volumes:
           - name: pwenv
             path: /pwenv
-    - name: "ghcr.io/project-chip/chip-build-vscode:24"
+    - name: "ghcr.io/project-chip/chip-build-vscode:25"
       id: NRFConnect
       env:
           - PW_ENVIRONMENT_ROOT=/pwenv
@@ -64,7 +64,7 @@ steps:
           - name: pwenv
             path: /pwenv
 
-    - name: "ghcr.io/project-chip/chip-build-vscode:24"
+    - name: "ghcr.io/project-chip/chip-build-vscode:25"
       id: EFR32
       env:
           - PW_ENVIRONMENT_ROOT=/pwenv
@@ -86,7 +86,7 @@ steps:
           - name: pwenv
             path: /pwenv
 
-    - name: "ghcr.io/project-chip/chip-build-vscode:24"
+    - name: "ghcr.io/project-chip/chip-build-vscode:25"
       id: Linux
       env:
           - PW_ENVIRONMENT_ROOT=/pwenv
@@ -139,7 +139,7 @@ steps:
           - name: pwenv
             path: /pwenv
 
-    - name: "ghcr.io/project-chip/chip-build-vscode:24"
+    - name: "ghcr.io/project-chip/chip-build-vscode:25"
       id: Android
       env:
           - PW_ENVIRONMENT_ROOT=/pwenv
diff --git a/scripts/build/build/targets.py b/scripts/build/build/targets.py
index 1736afc01f5f7a..fd6132e9519dd8 100755
--- a/scripts/build/build/targets.py
+++ b/scripts/build/build/targets.py
@@ -703,6 +703,7 @@ def BuildTelinkTarget():
     target.AppendFixedTargets([
         TargetPart('tlsr9518adk80d', board=TelinkBoard.TLSR9518ADK80D),
         TargetPart('tlsr9528a', board=TelinkBoard.TLSR9528A),
+        TargetPart('tlsr9528a_retention', board=TelinkBoard.TLSR9528A_RETENTION),
     ])
 
     target.AppendFixedTargets([
diff --git a/scripts/build/builders/telink.py b/scripts/build/builders/telink.py
index 0aa6ac68940eec..1dc75cfacc9c42 100644
--- a/scripts/build/builders/telink.py
+++ b/scripts/build/builders/telink.py
@@ -119,12 +119,15 @@ def AppNamePrefix(self):
 class TelinkBoard(Enum):
     TLSR9518ADK80D = auto()
     TLSR9528A = auto()
+    TLSR9528A_RETENTION = auto()
 
     def GnArgName(self):
         if self == TelinkBoard.TLSR9518ADK80D:
             return 'tlsr9518adk80d'
         elif self == TelinkBoard.TLSR9528A:
             return 'tlsr9528a'
+        elif self == TelinkBoard.TLSR9528A_RETENTION:
+            return 'tlsr9528a_retention'
         else:
             raise Exception('Unknown board type: %r' % self)
 
diff --git a/scripts/build/testdata/all_targets_linux_x64.txt b/scripts/build/testdata/all_targets_linux_x64.txt
index e76f940460ad46..d8739213c5d24f 100644
--- a/scripts/build/testdata/all_targets_linux_x64.txt
+++ b/scripts/build/testdata/all_targets_linux_x64.txt
@@ -22,5 +22,5 @@ nrf-native-posix-64-tests
 qpg-qpg6105-{lock,light,shell,persistent-storage}[-updateimage]
 stm32-stm32wb5mm-dk-light
 tizen-arm-{all-clusters,all-clusters-minimal,chip-tool,light,tests}[-no-ble][-no-thread][-no-wifi][-asan][-ubsan][-with-ui]
-telink-{tlsr9518adk80d,tlsr9528a}-{air-quality-sensor,all-clusters,all-clusters-minimal,bridge,contact-sensor,light,light-switch,lock,ota-requestor,pump,pump-controller,resource-monitoring,shell,smoke-co-alarm,temperature-measurement,thermostat,window-covering}[-ota][-dfu][-shell][-rpc][-factory-data][-4mb]
+telink-{tlsr9518adk80d,tlsr9528a,tlsr9528a_retention}-{air-quality-sensor,all-clusters,all-clusters-minimal,bridge,contact-sensor,light,light-switch,lock,ota-requestor,pump,pump-controller,resource-monitoring,shell,smoke-co-alarm,temperature-measurement,thermostat,window-covering}[-ota][-dfu][-shell][-rpc][-factory-data][-4mb]
 openiotsdk-{shell,lock}[-mbedtls][-psa]
diff --git a/scripts/tools/telink/update_zephyr.py b/scripts/tools/telink/update_zephyr.py
new file mode 100755
index 00000000000000..5c133f0f8fbdf7
--- /dev/null
+++ b/scripts/tools/telink/update_zephyr.py
@@ -0,0 +1,57 @@
+#!/usr/bin/env python3
+
+#
+# Copyright (c) 2023 Project CHIP Authors
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+import argparse
+import os
+import subprocess
+import sys
+
+
+def main():
+
+    try:
+        zephyr_base = os.getenv("ZEPHYR_BASE")
+        if not zephyr_base:
+            zephyr_base = os.getenv("TELINK_ZEPHYR_BASE")
+            os.environ['ZEPHYR_BASE'] = zephyr_base
+        if not zephyr_base:
+            raise RuntimeError(
+                "No ZEPHYR_BASE environment variable found, please set ZEPHYR_BASE to a zephyr repository path.")
+
+        parser = argparse.ArgumentParser(
+            description='Script helping to update Telink Zephyr to specific revision.')
+        parser.add_argument("hash", help="Update Telink Zephyr to specific revision.")
+
+        args = parser.parse_args()
+
+        command = ['git', '-C', zephyr_base, 'reset', args.hash, '--hard']
+        subprocess.run(command, check=True)
+
+        command = ['west', 'update', '-o=--depth=1', '-n', '-f', 'smart']
+        subprocess.run(command, check=True)
+
+        command = ['west', 'blobs', 'fetch', 'hal_telink']
+        subprocess.run(command, check=True)
+
+    except (RuntimeError, subprocess.CalledProcessError) as e:
+        print(e)
+        sys.exit(1)
+
+
+if __name__ == '__main__':
+    main()
diff --git a/src/platform/telink/CHIPDevicePlatformConfig.h b/src/platform/telink/CHIPDevicePlatformConfig.h
index 1849ea0ff57918..07967f8b273e4f 100644
--- a/src/platform/telink/CHIPDevicePlatformConfig.h
+++ b/src/platform/telink/CHIPDevicePlatformConfig.h
@@ -101,7 +101,11 @@
 #define CHIP_DEVICE_CONFIG_ENABLE_WIFI_AP 0
 #endif
 
+#ifdef CONFIG_BT
 #define CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE CONFIG_BT
+#else
+#define CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE 0
+#endif
 
 // ========== Platform-specific Configuration =========
 
diff --git a/src/platform/telink/CHIPPlatformConfig.h b/src/platform/telink/CHIPPlatformConfig.h
index f1b17fe1f2948d..9e0dc3dd36e8f7 100644
--- a/src/platform/telink/CHIPPlatformConfig.h
+++ b/src/platform/telink/CHIPPlatformConfig.h
@@ -64,10 +64,6 @@
 
 #ifdef CONFIG_PM
 
-#ifndef CHIP_CONFIG_ENABLE_SERVER_IM_EVENT
-#define CHIP_CONFIG_ENABLE_SERVER_IM_EVENT 0
-#endif // CHIP_CONFIG_ENABLE_SERVER_IM_EVENT
-
 #ifndef CHIP_CONFIG_MAX_GROUP_DATA_PEERS
 #define CHIP_CONFIG_MAX_GROUP_DATA_PEERS 7
 #endif // CHIP_CONFIG_MAX_GROUP_DATA_PEERS
diff --git a/src/platform/telink/tlsr9528a_retention.overlay b/src/platform/telink/tlsr9528a_retention.overlay
new file mode 100644
index 00000000000000..98a0e5af508f32
--- /dev/null
+++ b/src/platform/telink/tlsr9528a_retention.overlay
@@ -0,0 +1,55 @@
+/ {
+	/*
+	 * There is no way to keep GPIOs
+	 * during deep-sleep mode so output GPIOs
+	 * and PWM's are useless.
+	 */
+
+	aliases {
+		/delete-property/ led0;
+		/delete-property/ led1;
+		/delete-property/ led2;
+		/delete-property/ led3;
+		/delete-property/ mcuboot-led0;
+		/delete-property/ pwm-led0;
+		/delete-property/ pwm-0;
+	};
+
+	/delete-node/ leds;
+	/delete-node/ pwm_leds;
+
+	keys {
+		/delete-node/ button_1;
+		/delete-node/ button_3;
+		compatible = "gpio-keys";
+		key_1: button_1 {
+			gpios = <&gpiod 2 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
+		};
+		key_2: button_2 {
+			gpios = <&gpiod 7 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
+		};
+		key_3: button_3 {
+			gpios = <&gpiod 6 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
+		};
+		key_4: button_4 {
+			gpios = <&gpiof 6 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
+		};
+
+		key_matrix_col1: key_matrix_col1 {
+			gpios = <&gpiod 6 GPIO_ACTIVE_HIGH>;
+		};
+		key_matrix_col2: key_matrix_col2 {
+			gpios = <&gpiof 6 GPIO_ACTIVE_HIGH>;
+		};
+		key_matrix_row1: key_matrix_row1 {
+			gpios = <&gpiod 2 GPIO_PULL_DOWN>;
+		};
+		key_matrix_row2: key_matrix_row2 {
+			gpios = <&gpiod 7 GPIO_PULL_DOWN>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "disabled";
+};
diff --git a/src/test_driver/tizen/README.md b/src/test_driver/tizen/README.md
index 82108957e4c4fd..970f10f9c5a676 100644
--- a/src/test_driver/tizen/README.md
+++ b/src/test_driver/tizen/README.md
@@ -12,7 +12,7 @@ image from hub.docker.com or build it locally using the provided Dockerfile in
 
 ```sh
 # Pull the image from hub.docker.com
-docker pull ghcr.io/project-chip/chip-build-tizen-qemu:24
+docker pull ghcr.io/project-chip/chip-build-tizen-qemu:25
 ```
 
 ## Building and Running Tests on QEMU
@@ -21,7 +21,7 @@ All steps described below should be done inside the docker container.
 
 ```sh
 docker run -it --rm --name chip-tizen-qemu \
-    ghcr.io/project-chip/chip-build-tizen-qemu:24 /bin/bash
+    ghcr.io/project-chip/chip-build-tizen-qemu:25 /bin/bash
 ```
 
 ### Clone the connectedhomeip repository