diff --git a/config/nrfconnect/chip-module/Kconfig.defaults b/config/nrfconnect/chip-module/Kconfig.defaults index fedfc8cab28f57..67d4b1f23cf88a 100644 --- a/config/nrfconnect/chip-module/Kconfig.defaults +++ b/config/nrfconnect/chip-module/Kconfig.defaults @@ -21,7 +21,6 @@ if CHIP config LOG - bool default y if LOG @@ -35,33 +34,26 @@ choice MATTER_LOG_LEVEL_CHOICE endchoice config LOG_DEFAULT_LEVEL - int default 2 config CHIP_LOG_SIZE_OPTIMIZATION - bool default y endif config PRINTK_SYNC - bool default y config ASSERT - bool default y config HW_STACK_PROTECTION - bool default y config FPU - bool default y config SHELL - bool default y config PTHREAD_IPC @@ -70,117 +62,91 @@ config PTHREAD_IPC # Generic networking options config NET_SOCKETS_POSIX_NAMES - bool default n # Application stack size config MAIN_STACK_SIZE - int default 8192 config INIT_STACKS - bool default y # Disable certain parts of Zephyr IPv6 stack config NET_IPV6_NBR_CACHE - bool default n config NET_IPV6_MLD - bool default y config NET_IF_MCAST_IPV6_ADDR_COUNT - int default 14 # Network buffers config NET_PKT_RX_COUNT - int default 16 config NET_PKT_TX_COUNT - int default 16 config NET_BUF_RX_COUNT - int default 80 config NET_BUF_TX_COUNT - int default 80 # Bluetooth Low Energy configs config BT - bool default y config BT_PERIPHERAL - bool default y config BT_PERIPHERAL_PREF_MIN_INT - int default 36 config BT_PERIPHERAL_PREF_MAX_INT - int default 36 config BT_GAP_AUTO_UPDATE_CONN_PARAMS - bool default y config BT_GATT_DYNAMIC_DB - bool default y config BT_DEVICE_NAME_DYNAMIC - bool default y config BT_DEVICE_NAME_MAX - int default 15 config BT_MAX_CONN - int default 1 config BT_L2CAP_TX_MTU - int default 247 config BT_BUF_ACL_RX_SIZE - int default 251 config BT_BUF_ACL_TX_SIZE - int default 251 config BT_RX_STACK_SIZE - int default 1200 # Enable NFC support config CHIP_NFC_COMMISSIONING - bool default y config CHIP_OTA_REQUESTOR - bool default y # All boards besides nRF7002DK use QSPI NOR external flash if BOARD_NRF5340DK_NRF5340_CPUAPP || BOARD_NRF52840DK_NRF52840 config CHIP_QSPI_NOR - bool default y endif # BOARD_NRF5340DK_NRF5340_CPUAPP || BOARD_NRF52840DK_NRF52840 @@ -190,35 +156,29 @@ endif # BOARD_NRF5340DK_NRF5340_CPUAPP || BOARD_NRF52840DK_NRF52840 if BOARD_NRF7002DK_NRF5340_CPUAPP config CHIP_SPI_NOR - bool default y endif # BOARD_NRF7002DK_NRF5340_CPUAPP # Enable extended discovery config CHIP_EXTENDED_DISCOVERY - bool default y config NVS_LOOKUP_CACHE - bool default y config NVS_LOOKUP_CACHE_SIZE - int default 512 # Enable OpenThread config NET_L2_OPENTHREAD - bool default y if !WIFI_NRF700X if NET_L2_OPENTHREAD # Increase the default RX stack size config IEEE802154_NRF5_RX_STACK_SIZE - int default 1024 endif @@ -226,50 +186,39 @@ endif if CHIP_WIFI config NRF_WIFI_LOW_POWER - bool default n config MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG - bool default n config SYSTEM_WORKQUEUE_STACK_SIZE - int default 1120 # align these numbers to match the OpenThread config config NET_IF_UNICAST_IPV6_ADDR_COUNT - int default 6 config NET_IF_MCAST_IPV6_ADDR_COUNT - int default 8 config NET_SOCKETS_POSIX_NAMES - bool default n config MBEDTLS_SSL_OUT_CONTENT_LEN - int default 900 # options managed by IP4/IP6 simultaneous support # aligned here to match OpenThread config config NET_MAX_ROUTERS - int default 1 config NET_MAX_CONN - int default 4 config SHELL_STACK_SIZE - int default 2616 config HEAP_MEM_POOL_SIZE - int default 200000 endif @@ -282,183 +231,139 @@ choice OPENTHREAD_SECURITY endchoice config PSA_CRYPTO_DRIVER_CC3XX - bool default n config OBERON_BACKEND - bool default y config MBEDTLS_ENABLE_HEAP - bool default y config MBEDTLS_HEAP_SIZE - int default 15360 config MBEDTLS_TLS_LIBRARY - bool default y config NRF_SECURITY_ADVANCED - bool default y config MBEDTLS_AES_C - bool default y config MBEDTLS_ECP_C - bool default y config MBEDTLS_ECP_DP_SECP256R1_ENABLED - bool default y config MBEDTLS_CTR_DRBG_C - bool default y config MBEDTLS_CIPHER_MODE_CTR - bool default y config MBEDTLS_ECJPAKE_C - bool default y config MBEDTLS_SHA256_C - bool default y config MBEDTLS_PK_C - bool default y config MBEDTLS_PK_WRITE_C - bool default y config MBEDTLS_X509_CREATE_C - bool default y if !CHIP_CRYPTO_PSA config MBEDTLS_X509_CSR_WRITE_C - bool default y if !CHIP_CRYPTO_PSA # Disable unneeded crypto operations config MBEDTLS_SHA384_C - bool default n config MBEDTLS_SHA512_C - bool default n config MBEDTLS_CIPHER_MODE_XTS - bool default n config MBEDTLS_CHACHA20_C - bool default n config MBEDTLS_POLY1305_C - bool default n config MBEDTLS_CHACHAPOLY_C - bool default n config MBEDTLS_GCM_C - bool default n config MBEDTLS_RSA_C - bool default n config PSA_WANT_KEY_TYPE_ARIA - bool default n config PSA_WANT_KEY_TYPE_CHACHA20 - bool default n config PSA_WANT_ALG_GCM - bool default n config PSA_WANT_ALG_CHACHA20_POLY1305 - bool default n config PSA_WANT_ALG_SHA_1 - bool default n config PSA_WANT_ALG_SHA_224 - bool default n config PSA_WANT_ALG_SHA_384 - bool default n config PSA_WANT_ALG_SHA_512 - bool default n config PSA_WANT_ALG_RIPEMD160 - bool default n config PSA_WANT_ALG_MD5 - bool default n config PSA_WANT_ALG_CFB - bool default n config PSA_WANT_ALG_OFB - bool default n # Disable not used shell modules config SENSOR_SHELL - bool default n config DEVICE_SHELL - bool default n config DATE_SHELL - bool default n config DEVMEM_SHELL - bool default n config MCUBOOT_SHELL - bool default n config CLOCK_CONTROL_NRF_SHELL - bool default n config FLASH_SHELL - bool default n # SoC series related configuration @@ -467,7 +372,6 @@ if SOC_SERIES_NRF52X # Increase maximum data length of PDU supported in the Controller config BT_CTLR_DATA_LENGTH_MAX - int default 251 endif # SOC_SERIES_NRF52X @@ -475,7 +379,6 @@ endif # SOC_SERIES_NRF52X if SOC_SERIES_NRF53X config UPDATEABLE_IMAGE_NUMBER - int default 2 # Generate random numbers using Xoroshiro algorithm instead of direct calls diff --git a/config/nrfconnect/chip-module/Kconfig.features b/config/nrfconnect/chip-module/Kconfig.features index 918a82685cad02..662d7074ebe0b3 100644 --- a/config/nrfconnect/chip-module/Kconfig.features +++ b/config/nrfconnect/chip-module/Kconfig.features @@ -49,11 +49,9 @@ config CHIP_QSPI_NOR if CHIP_QSPI_NOR config NORDIC_QSPI_NOR - bool default y config NORDIC_QSPI_NOR_STACK_WRITE_BUFFER_SIZE - int default 16 endif # CHIP_QSPI_NOR @@ -71,7 +69,6 @@ config CHIP_SPI_NOR if CHIP_SPI_NOR config SPI_NOR_FLASH_LAYOUT_PAGE_SIZE - int default 4096 endif # CHIP_SPI_NOR @@ -96,41 +93,33 @@ if CHIP_DFU_OVER_BT_SMP # MCU Manager and SMP configuration config MCUMGR_SMP_BT_AUTHEN - bool default n config MCUMGR_BUF_COUNT - int default 6 # Increase BT MTU and RX buffer for big size DFU messages config BT_L2CAP_TX_MTU - int default 498 config BT_BUF_ACL_RX_SIZE - int default 502 # Increase MCUMGR_BUF_SIZE, as it must be big enough to fit MAX MTU + overhead and for single-image DFU default is 384 B config MCUMGR_BUF_SIZE - int default 1024 # Increase system workqueue size, as SMP is processed within it config SYSTEM_WORKQUEUE_STACK_SIZE - int default 2800 if SOC_SERIES_NRF53X # Enable custom SMP request to erase settings partition. config MCUMGR_GRP_ZEPHYR_BASIC - bool default y config MCUMGR_GRP_BASIC_CMD_STORAGE_ERASE - bool default y endif # SOC_SERIES_NRF53X diff --git a/config/nrfconnect/chip-module/Kconfig.hci_rpmsg.defaults b/config/nrfconnect/chip-module/Kconfig.hci_rpmsg.defaults index 8069d710047338..83290b2b492f28 100644 --- a/config/nrfconnect/chip-module/Kconfig.hci_rpmsg.defaults +++ b/config/nrfconnect/chip-module/Kconfig.hci_rpmsg.defaults @@ -17,83 +17,63 @@ # The purpose of this file is to define new default values of settings used when building hci_rpmsg child image for Matter samples. config LOG - bool default n config HEAP_MEM_POOL_SIZE - int default 8192 config MAIN_STACK_SIZE - int default 2048 config SYSTEM_WORKQUEUE_STACK_SIZE - int default 2048 config BT - bool default y config BT_HCI_RAW - bool default y config BT_MAX_CONN - int default 1 config BT_PERIPHERAL - bool default y config BT_CENTRAL - bool default n config BT_BUF_ACL_RX_SIZE - int default 502 config BT_BUF_ACL_TX_SIZE - int default 251 config BT_CTLR_DATA_LENGTH_MAX - int default 251 config BT_CTLR_ASSERT_HANDLER - bool default y config BT_HCI_RAW_RESERVE - int default 1 # Workaround: Unable to allocate command buffer when using K_NO_WAIT since # Host number of completed commands does not follow normal flow control. config BT_BUF_CMD_TX_COUNT - int default 10 config ASSERT - bool default y config DEBUG_INFO - bool default y config EXCEPTION_STACK_TRACE - bool default y config IPC_SERVICE - bool default y config MBOX - bool default y diff --git a/config/nrfconnect/chip-module/Kconfig.mcuboot.defaults b/config/nrfconnect/chip-module/Kconfig.mcuboot.defaults index b9c6dce1982fb7..72169ca50afd8e 100644 --- a/config/nrfconnect/chip-module/Kconfig.mcuboot.defaults +++ b/config/nrfconnect/chip-module/Kconfig.mcuboot.defaults @@ -17,50 +17,39 @@ # The purpose of this file is to define new default values of settings used when building mcuboot child image for Matter samples. config MAIN_STACK_SIZE - int default 10240 config BOOT_SWAP_SAVE_ENCTLV - bool default n config BOOT_ENCRYPT_RSA - bool default n config BOOT_ENCRYPT_EC256 - bool default n config BOOT_ENCRYPT_X25519 - bool default n config BOOT_BOOTSTRAP - bool default n config PM - bool default n config FLASH - bool default y config FPROTECT - bool default y # nRF7002DK uses SPI NOR external flash if BOARD_NRF7002DK_NRF5340_CPUAPP config SPI - bool default y config SPI_NOR - bool default y choice SPI_NOR_SFDP @@ -68,15 +57,12 @@ choice SPI_NOR_SFDP endchoice config SPI_NOR_FLASH_LAYOUT_PAGE_SIZE - int default 4096 config MULTITHREADING - bool default y config PM_OVERRIDE_EXTERNAL_DRIVER_CHECK - bool default y endif @@ -85,68 +71,53 @@ endif if BOARD_NRF5340DK_NRF5340_CPUAPP || BOARD_NRF52840DK_NRF52840 config NORDIC_QSPI_NOR - bool default y config NORDIC_QSPI_NOR_FLASH_LAYOUT_PAGE_SIZE - int default 4096 config NORDIC_QSPI_NOR_STACK_WRITE_BUFFER_SIZE - int default 16 endif config BOOT_MAX_IMG_SECTORS - int default 256 config LOG - bool default n config CONSOLE_HANDLER - bool default n config BOOT_BANNER - bool default n config TIMESLICING - bool default n config RESET_ON_FATAL_ERROR - bool default n config MULTITHREADING - bool default n config TICKLESS_KERNEL - bool default n config TIMEOUT_64BIT - bool default n config NRF_ENABLE_ICACHE - bool default n if SOC_SERIES_NRF53X # The following configurations are required to support simultaneous multi image update config PCD_APP - bool default y config UPDATEABLE_IMAGE_NUMBER - int default 2 # Multi-image updates do not support image swapping yet. @@ -157,24 +128,19 @@ endchoice # The network core cannot access external flash directly. The flash simulator must be used to # provide a memory region that is used to forward the new firmware to the network core. config FLASH_SIMULATOR - bool default y config FLASH_SIMULATOR_DOUBLE_WRITES - bool default y config FLASH_SIMULATOR_STATS - bool default n # Enable custom command to erase settings partition. config ENABLE_MGMT_PERUSER - bool default y config BOOT_MGMT_CUSTOM_STORAGE_ERASE - bool default y endif # SOC_SERIES_NRF53X diff --git a/config/nrfconnect/chip-module/Kconfig.multiprotocol_rpmsg.defaults b/config/nrfconnect/chip-module/Kconfig.multiprotocol_rpmsg.defaults index 18d3e7889ae1a2..9fee38cb5f38fc 100644 --- a/config/nrfconnect/chip-module/Kconfig.multiprotocol_rpmsg.defaults +++ b/config/nrfconnect/chip-module/Kconfig.multiprotocol_rpmsg.defaults @@ -17,87 +17,66 @@ # The purpose of this file is to define new default values of settings used when building multiprotocol_rpmsg child image for Matter samples. config LOG - bool default n config HEAP_MEM_POOL_SIZE - int default 8192 config MAIN_STACK_SIZE - int default 2048 config SYSTEM_WORKQUEUE_STACK_SIZE - int default 2048 config BT - bool default y config BT_HCI_RAW - bool default y config BT_MAX_CONN - int default 1 config BT_PERIPHERAL - bool default y config BT_CENTRAL - bool default n config BT_BUF_ACL_RX_SIZE - int default 502 config BT_BUF_ACL_TX_SIZE - int default 251 config BT_CTLR_DATA_LENGTH_MAX - int default 251 config BT_CTLR_ASSERT_HANDLER - bool default y config BT_HCI_RAW_RESERVE - int default 1 # Workaround: Unable to allocate command buffer when using K_NO_WAIT since # Host number of completed commands does not follow normal flow control. config BT_BUF_CMD_TX_COUNT - int default 10 config ASSERT - bool default y config DEBUG_INFO - bool default y config EXCEPTION_STACK_TRACE - bool default y config NRF_802154_SER_RADIO - bool default y config NRF_RTC_TIMER_USER_CHAN_COUNT - int default 2 config NRF_802154_ENCRYPTION - bool default y