diff --git a/examples/lighting-app/bouffalolab/bl602/README.md b/examples/lighting-app/bouffalolab/bl602/README.md index 2810808d155393..2bc2e05a371abd 100644 --- a/examples/lighting-app/bouffalolab/bl602/README.md +++ b/examples/lighting-app/bouffalolab/bl602/README.md @@ -1,124 +1,104 @@ # BL602 This example functions as a wifi light bulb device type, with on/off -capabilities. The steps were verified on BL602-IoT-DVK-3S board. +capabilities. The steps were verified on BL602 development board. -BL602-IoT-DVK-3S +BL602 development board: ## Initial setup -- Setting up the environment on ubuntu 20.04 or 18.04 +The steps in this document were validated on Ubuntu 18.04 and 20.04. -``` -$ sudo apt-get update -$ sudo apt-get upgrade -$ sudo apt-get install git gcc g++ python pkg-config libssl-dev libdbus-1-dev libglib2.0-dev libavahi-client-dev ninja-build python3-venv python3-dev python3-pip unzip libgirepository1.0-dev libcairo2-dev bluez avahi-daemon -$ sudo apt-get install pi-bluetooth (if not raspberry pi, sudo apt-get install bluetooth) -$ reboot +- Install dependencies as specified in the connectedhomeip repository: + [Building Matter](https://github.com/project-chip/connectedhomeip/blob/interop_testing_te9/docs/guides/BUILDING.md). +- Install other dependencies: -``` + ``` + sudo apt-get update + sudo apt-get upgrade + sudo apt-get install bluez avahi-daemon bluetooth + reboot + ``` - Clone and initialize the connectedhomeip repo -``` -git clone https://github.com/project-chip/connectedhomeip.git -cd connectedhomeip -git submodule update --init --recursive -``` - -- Install packets - -``` -$ cd {path-to-connectedhomeip} -connectedhomeip$ source ./scripts/bootstrap.sh -connectedhomeip$ source ./scripts/activate.sh - -``` + ``` + git clone https://github.com/project-chip/connectedhomeip.git + cd connectedhomeip + git submodule update --init --recursive + source ./scripts/activate.sh + ``` ## Build the image - Build the example application: - `connectedhomeip$ ./scripts/build/build_examples.py --target bl602-light build` + ``` + connectedhomeip$ ./scripts/build/build_examples.py --target bl602-light build + ``` Generated files - `connectedhomeip/out/bl602-light/chip-bl602-lighting-example.bin` + ``` + connectedhomeip/out/bl602-light/chip-bl602-lighting-example.bin + ``` - - To delete generated executable, libraries and object files use: + To delete generated executable, libraries and object files use: ``` - $ cd ~/connectedhomeip/ - $ rm -rf out/ + cd ~/connectedhomeip/ + rm -rf out/ ``` ## Flash the board -- Download [Bouffalo Lab Dev Cube](https://dev.bouffalolab.com/download/). - - Log in to the site as a guest. - - - - - -run the software : - - +- Build the + [lighting-app](https://github.com/project-chip/connectedhomeip/tree/master/examples/lighting-app/bouffalolab/bl602) - - -The following picture shows the burning interface. To download the firmware, you -need to enter the download mode: press and hold the Boot (IO8) pin of the -development board, press the **RST** button, and then release the Boot button to -enter the burning and downloading mode. - - - -Notice: Latest version Bouffalolab dev cube is recommended. + ``` + ./scripts/build/build_examples.py --target bl602-light build + ``` -Factory Params: -`BouffaloLabDevCube-1.7.2-linux-x86/chips/bl602/device_tree/bl_factory_params_IoTKitA_40M.dts` +- Connect the board to your flashing station (MacOS, Ubuntu, Windows). -Partition Table: -`BouffaloLabDevCube-1.7.2-linux-x86/chips/bl602/partition/partition_cfg_2M.toml` +- Set the board to the download mode: -Boot2 Bin: -`BouffaloLabDevCube-1.7.2-linux-x86/chips/bl602/builtin_imgs/boot2_iap_v5.5/boot2_iap_release.bin` + - Press and hold the BOOT button. + - Press the RESET button and release it. + - Release the BOOT button. -Firmware Bin: `connectedhomeip/out/bl602-light/chip-bl602-lighting-example.bin` +- The device should present itself as a USB serial device on your computer. + You may look it up in /dev/ttyACM0 -Partition Tableļ¼š + ``` + ls -la /dev/tty* + ``` -1. FW: The size of FW size0 must be larger than the bin size, we can do it by - reducing the size of FW size1 and media partition size0. + If the device is at /dev/ttyACM0, flash the board using the following + commands: -COM Port: + ``` + cd third_party/bouffalolab/bl602_sdk/repo/tools/flash_tool -``` - ls -la /dev/ttyUSB* -``` + ./bflb_iot_tool-ubuntu18 --chipname=BL602 --baudrate=115200 --port=/dev/ttyACM0 --pt=chips/bl602/partition/partition_cfg_4M.toml --dts=chips/bl602/device_tree/bl_factory_params_IoTKitA_40M.dts --firmware=../../../../../../out/bl602-light/chip-bl602-lighting-example.bin + ``` -select the big one. + ``` + If you want to erase previous network information in flash, you can add --erase parameters to the bflb_iot_tool-ubuntu18 command. For Windows and MacOS, replace bflb_iot_tool-ubuntu18 with bflb_iot_tool.exe and bflb_iot_tool-macos, respectively. + ``` ## Validate the example -1.The device should present itself as a USB serial device on your computer. You -may look it up in `/dev/`: - -``` -ls -la /dev/tty* -``` - -You can open the serial console. For example, if the device is at `/dev/USB1`: +1.You can open the serial console. For example, if the device is at +`/dev/ttyACM0`: ``` -picocom -b 2000000 /dev/ttyUSB1 +picocom -b 2000000 /dev/ttyACM0 ``` -To reset the board, press the **RST** button. And you will see the log from the -demo board. +2.To reset the board, press the RESET button, and you will see the log in the +`picocom terminal`. ## Commission a device using chip-tool @@ -150,8 +130,12 @@ $ sudo ./chip-tool pairing ble-wifi 1 ${SSID} ${PASSWORD} 20202021 3840 the OnOff attribute. This allows you to toggle a parameter implemented by the device to be On or Off. - `$ sudo ./chip-tool onoff on 1 1` + ``` + $ sudo ./chip-tool onoff on 1 1 + ``` - Use ColorControl cluster command to control the color attributes: - `$ sudo ./chip-tool colorcontrol move-to-hue-and-saturation 240 100 0 0 0 1 1` + ``` + $ sudo ./chip-tool colorcontrol move-to-hue-and-saturation 240 100 0 0 0 1 1 + ``` diff --git a/third_party/bouffalolab/bl602_sdk/repo b/third_party/bouffalolab/bl602_sdk/repo index f6bfc41269f9f7..92a9b331bc54b7 160000 --- a/third_party/bouffalolab/bl602_sdk/repo +++ b/third_party/bouffalolab/bl602_sdk/repo @@ -1 +1 @@ -Subproject commit f6bfc41269f9f73eb779fe3b3600dd4c96db26ae +Subproject commit 92a9b331bc54b77088f590f2973e61ea7e7db18b