Webtail is a web-socket based server that streams log files onto your browser. Written in Golang, this application provides a basic and clean material UI to view the logs as well.
$ go run main.go --help
usage: main [<flags>] [<dir>...]
Flags:
--help Show context-sensitive help (also try --help-long and --help-man).
-p, --port=8080 Port number to host the server
-r, --restrict Enforce PAM authentication (single level)
-a, --acl=ACL enable Access Control List with users in the provided file
-t, --cron="0h" configure cron for re-indexing files, Supported durations:[h -> hours, d -> days]
-s, --secure Run Server with TLS
-c, --cert="server.crt" Server Certificate
-k, --key="server.key" Server Key File
Args:
[<dir>] Directory path(s) to look for files
To view the UI, navigate to http(s)://server_ip:port and you will be presented with a UI to view the logs.
./webtail
This will run the server on port 8080 and look for files in the current Directory
./webtail --port 15000 /var/log/tomcat /tmp/
This will run the server on port 15000 and recursively look for files in /var/log/tomcat and /tmp directories (provided the permissions)
./webtail /var/log/tomcat /tmp/ --restrict
This will add an authentication layer over it. Once you navigate to the home page, it will redirect to the /login page and ask for username and password. Since this is supposed to be as generic as possible, hence it uses PAM authentication to authenticate the user. You need to provide the credentials that you would use to login to the host on which the server is hosted. Right now it would only authenticate via PAM if only a single step is required.
For this it uses CGO. A basic starting point for this would be Calling Go functions from C. This also has information on how to call C funtions from Golang, which is what is being used in this module. It is performing PAM authentication using the passwd service in pam_auth.go.
This contains the code to interact with the system's PAM and check if a username/password combination is valid or not.
Some information about pam authentication : RedHat - PAM Configuration files
./webtail /var/log/tomcat --restrict --acl ~/allowed-users.txt
This will have the authentication layer with another layer of ACL, allowing only those users to authenticate with the server which are in the ~/allowed-users.txt. It accepts a file that has newline separated usernames.
./webtail /var/log/tomcat --restrict --cron 5h
This will make the server re-index files every 5 hours. And the New files will be served only after a page refresh, once it has been indexed.
To build from source, please refer the Makefile, all you need to do is change the GOOS and GOARCH variables to your specific distributions. The Makefile has it configured for linux/amd64 by default.
make clean package
If you are testing it then:
make clean build
and then you can run it from the project root
Note
- If you get the following error:
security/pam_appl.h: No such file or directory
Then you need to install PAM developement libraries.
CentOS : yum install pam-devel
Debian : sudo apt-get install -y libpam0g-dev
Reference: pam_appl.h and pam_misc.h missing
- If you get the following error, then try building this in a linux box. (I saw some SO or Github post on this suggesting a fork of golang)
/usr/local/go/pkg/tool/darwin_amd64/link: running clang failed: exit status 1
ld: warning: ignoring file /var/folders/30/qpxs8kwj3jzc612r2gsq17zwc2yvq5/T/go-link-136319902/go.o, file was built for unsupported file format ( 0x7F 0x45 0x4C 0x46 0x02 0x01 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 ) which is not the architecture being linked (x86_64): /var/folders/30/qpxs8kwj3jzc612r2gsq17zwc2yvq5/T/go-link-136319902/go.o
Undefined symbols for architecture x86_64:
"__cgo_topofstack", referenced from:
__cgo_fc9493e99cab_Cfunc_authenticate_system in 000001.o
__cgo_f7895c2c5a3a_C2func_getnameinfo in 000004.o
__cgo_f7895c2c5a3a_Cfunc_getnameinfo in 000004.o
__cgo_f7895c2c5a3a_C2func_getaddrinfo in 000006.o
__cgo_f7895c2c5a3a_Cfunc_gai_strerror in 000006.o
__cgo_f7895c2c5a3a_Cfunc_getaddrinfo in 000006.o
"_main", referenced from:
implicit entry/start for main executable
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
- It uses the
LDFLAG -lpamto build the C code, so if you get errors related to this, worth looking for.
To run the server with TLS enabled use --secure flag. It will search for server.crt and server.key files in the current directory, if not will fail.
./webtail /var/log/tomcat --secure --cert /path/to/server.crt --key /path/to/server.key --port 8443 --restrict
If you are running it on --restrict mode then it is recommended to use --secure flag as well to protect the login credentials on the wire.
Server Accepts connections only on TLSv1.1 and above
List of CiphersSuites supported by the server:
tls.TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
tls.TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
tls.TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
tls.TLS_RSA_WITH_AES_256_GCM_SHA384
tls.TLS_RSA_WITH_AES_256_CBC_SHA
to connect to a particular cipher you can use
TLSv1.1
echo "" | openssl s_client -connect localhost:8443 -cipher AES256-SHA -tls1_1 -quiet 2>/dev/null
TLSv1.2
echo "" | openssl s_client -connect localhost:8443 -cipher ECDHE-RSA-AES128-SHA256 -tls1_2 -quiet 2>/dev/null
Note: It requires the private key to be in the plain text format. i.e. it should not be passphrase protected. Can be done via
openssl rsa -in [file1.key] -out [file2.key]
Cron option supports only 2 formats of time: days and hours.
You can say something like 5h or 1d or 100h or 4d. Zero prefixed time intervals are not allowed and will fail.
Note: By default cron is not enabled and will not re-index files.
Login
Dashboard
SideNav
Tail
Add https supportAdd cron support to re-index files in the provided directories- Add file descriptor pooling while tailing to conserver resources
- Add authentication on websockets (cannot validate CSRF token on GET request in gorilla/csrf, checking Origin header only for now)
- Add a proper logger
- Any help in UI is most welcome