CAT ham radio serial control

[cjcliffe]

Where available allow supplying path/device name for serial port so that Frequency, etc. control can be controlled/read via CAT serial commands.

• basic frequency control and feedback via hamlib
• figure out what else we can shoehorn in from hamlib without going overboard :)

[n7ihq]

To support transit capability, please consider adding the following Hamlib commands:

ptt-file=device
ptt-type=type
set_ptt
get_ptt

Thanks!
Jim N7IHQ

[guruofquality]

To support transit capability, please consider adding the following Hamlib commands:

Just FYI, if you have something specific in mind and you have the hardware to test it, the best way is to develop the change, and submit a pull request.

[n7ihq]

Hi Josh,

On Jan 13, 2019, at 2:41 PM, Josh Blum ***@***.***> wrote: To support transit capability, please consider adding the following Hamlib commands: Just FYI, if you have something specific in mind and you have the hardware to test it, the best way is to develop the change, and submit a pull request.

Thank you for your reply. I will add Hamlib commands to a copy of the code and test the changes.