From 91c64a4f1cb01cf0ec50f0372ff8ca9d3022b7d0 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 2 Oct 2021 22:23:34 -0700 Subject: [PATCH 001/493] drm/i915/gvt: clean up kernel-doc in gtt.c Fix kernel-doc warnings in gtt.c: gtt.c:1152: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Check if can do 2M page gtt.c:1152: warning: missing initial short description on line: * Check if can do 2M page gtt.c:2209: warning: expecting prototype for intel_vgpu_emulate_gtt_mmio_read(). Prototype was for intel_vgpu_emulate_ggtt_mmio_read() instead Fixes: a752b070a678 ("drm/i915/gvt: Fix function comment doc errors") Fixes: 2707e4446688 ("drm/i915/gvt: vGPU graphics memory virtualization") Signed-off-by: Randy Dunlap Reported-by: kernel test robot Cc: Zhenyu Wang Cc: Zhi Wang Cc: Colin Xu Cc: Jani Nikula Cc: Joonas Lahtinen Cc: Rodrigo Vivi Cc: intel-gfx@lists.freedesktop.org Cc: intel-gvt-dev@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: David Airlie Cc: Daniel Vetter Signed-off-by: Zhi Wang Link: http://patchwork.freedesktop.org/patch/msgid/20211003052334.15764-1-rdunlap@infradead.org Reviewed-by: Zhi Wang Signed-off-by: Zhi Wang --- drivers/gpu/drm/i915/gvt/gtt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/gtt.c b/drivers/gpu/drm/i915/gvt/gtt.c index 53d0cb3275398c..93ce786905dd48 100644 --- a/drivers/gpu/drm/i915/gvt/gtt.c +++ b/drivers/gpu/drm/i915/gvt/gtt.c @@ -1148,7 +1148,7 @@ static inline void ppgtt_generate_shadow_entry(struct intel_gvt_gtt_entry *se, ops->set_pfn(se, s->shadow_page.mfn); } -/** +/* * Check if can do 2M page * @vgpu: target vgpu * @entry: target pfn's gtt entry @@ -2193,7 +2193,7 @@ static int emulate_ggtt_mmio_read(struct intel_vgpu *vgpu, } /** - * intel_vgpu_emulate_gtt_mmio_read - emulate GTT MMIO register read + * intel_vgpu_emulate_ggtt_mmio_read - emulate GTT MMIO register read * @vgpu: a vGPU * @off: register offset * @p_data: data will be returned to guest From d72d69abfdb6e0375981cfdda8eb45143f12c77d Mon Sep 17 00:00:00 2001 From: Siva Mullati Date: Fri, 7 Jan 2022 15:22:35 +0530 Subject: [PATCH 002/493] drm/i915/gvt: Make DRM_I915_GVT depend on X86 GVT is not supported on non-x86 platforms, So add dependency of X86 on config parameter DRM_I915_GVT. Fixes: 0ad35fed618c ("drm/i915: gvt: Introduce the basic architecture of GVT-g") Signed-off-by: Siva Mullati Signed-off-by: Zhi Wang Link: http://patchwork.freedesktop.org/patch/msgid/20220107095235.243448-1-siva.mullati@intel.com Reviewed-by: Zhi Wang Signed-off-by: Zhi Wang --- drivers/gpu/drm/i915/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/i915/Kconfig b/drivers/gpu/drm/i915/Kconfig index 84b6fc70cbf52b..0bddb75fa7e012 100644 --- a/drivers/gpu/drm/i915/Kconfig +++ b/drivers/gpu/drm/i915/Kconfig @@ -101,6 +101,7 @@ config DRM_I915_USERPTR config DRM_I915_GVT bool "Enable Intel GVT-g graphics virtualization host support" depends on DRM_I915 + depends on X86 depends on 64BIT default n help From e26a78057c25dd56f112d536319c38735ed92ba4 Mon Sep 17 00:00:00 2001 From: Alex Henrie Date: Sun, 16 Jan 2022 16:01:58 -0700 Subject: [PATCH 003/493] HID: apple: Set the tilde quirk flag on the Wellspring 5 and later Markus reports that his 2011 MacBook with a German ISO keyboard (USB product code 05ac:0246, HID country code 13) has the tilde key quirk. Seeing as all of the standalone Apple ISO keyboards since about 2008 have the quirk, it seems reasonable to assume that once the integrated laptop keyboards started having the quirk, they likewise never stopped having it. Reported-by: Markus Wageringel Signed-off-by: Alex Henrie Signed-off-by: Jiri Kosina --- drivers/hid/hid-apple.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index 24802a4a636ee4..7dc89dc6b0f0eb 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -691,49 +691,49 @@ static const struct hid_device_id apple_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI), .driver_data = APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_ISO), - .driver_data = APPLE_HAS_FN }, + .driver_data = APPLE_HAS_FN | APPLE_ISO_TILDE_QUIRK }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_JIS), .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI), .driver_data = APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6_ISO), - .driver_data = APPLE_HAS_FN }, + .driver_data = APPLE_HAS_FN | APPLE_ISO_TILDE_QUIRK }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6_JIS), .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI), .driver_data = APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO), - .driver_data = APPLE_HAS_FN }, + .driver_data = APPLE_HAS_FN | APPLE_ISO_TILDE_QUIRK }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS), .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI), .driver_data = APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO), - .driver_data = APPLE_HAS_FN }, + .driver_data = APPLE_HAS_FN | APPLE_ISO_TILDE_QUIRK }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS), .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI), .driver_data = APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO), - .driver_data = APPLE_HAS_FN }, + .driver_data = APPLE_HAS_FN | APPLE_ISO_TILDE_QUIRK }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS), .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI), .driver_data = APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO), - .driver_data = APPLE_HAS_FN }, + .driver_data = APPLE_HAS_FN | APPLE_ISO_TILDE_QUIRK }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS), .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI), .driver_data = APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ISO), - .driver_data = APPLE_HAS_FN }, + .driver_data = APPLE_HAS_FN | APPLE_ISO_TILDE_QUIRK }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_JIS), .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING9_ANSI), .driver_data = APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING9_ISO), - .driver_data = APPLE_HAS_FN }, + .driver_data = APPLE_HAS_FN | APPLE_ISO_TILDE_QUIRK }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING9_JIS), .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI), From b7a78a8adaa8849c02f174d707aead0f85dca0da Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Fri, 7 Jan 2022 09:14:01 +0100 Subject: [PATCH 004/493] iio: adc: tsc2046: fix memory corruption by preventing array overflow On one side we have indio_dev->num_channels includes all physical channels + timestamp channel. On other side we have an array allocated only for physical channels. So, fix memory corruption by ARRAY_SIZE() instead of num_channels variable. Note the first case is a cleanup rather than a fix as the software timestamp channel bit in active_scanmask is never set by the IIO core. Fixes: 9374e8f5a38d ("iio: adc: add ADC driver for the TI TSC2046 controller") Signed-off-by: Oleksij Rempel Link: https://lore.kernel.org/r/20220107081401.2816357-1-o.rempel@pengutronix.de Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ti-tsc2046.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/adc/ti-tsc2046.c b/drivers/iio/adc/ti-tsc2046.c index d84ae6b008c1b0..e8fc4d01f30b65 100644 --- a/drivers/iio/adc/ti-tsc2046.c +++ b/drivers/iio/adc/ti-tsc2046.c @@ -388,7 +388,7 @@ static int tsc2046_adc_update_scan_mode(struct iio_dev *indio_dev, mutex_lock(&priv->slock); size = 0; - for_each_set_bit(ch_idx, active_scan_mask, indio_dev->num_channels) { + for_each_set_bit(ch_idx, active_scan_mask, ARRAY_SIZE(priv->l)) { size += tsc2046_adc_group_set_layout(priv, group, ch_idx); tsc2046_adc_group_set_cmd(priv, group, ch_idx); group++; @@ -548,7 +548,7 @@ static int tsc2046_adc_setup_spi_msg(struct tsc2046_adc_priv *priv) * enabled. */ size = 0; - for (ch_idx = 0; ch_idx < priv->dcfg->num_channels; ch_idx++) + for (ch_idx = 0; ch_idx < ARRAY_SIZE(priv->l); ch_idx++) size += tsc2046_adc_group_set_layout(priv, ch_idx, ch_idx); priv->tx = devm_kzalloc(&priv->spi->dev, size, GFP_KERNEL); From 0e33d15f1dce9e3a80a970ea7f0b27837168aeca Mon Sep 17 00:00:00 2001 From: Cosmin Tanislav Date: Wed, 12 Jan 2022 22:00:36 +0200 Subject: [PATCH 005/493] iio: adc: ad7124: fix mask used for setting AIN_BUFP & AIN_BUFM bits According to page 90 of the datasheet [1], AIN_BUFP is bit 6 and AIN_BUFM is bit 5 of the CONFIG_0 -> CONFIG_7 registers. Fix the mask used for setting these bits. [1]: https://www.analog.com/media/en/technical-documentation/data-sheets/ad7124-8.pdf Fixes: 0eaecea6e487 ("iio: adc: ad7124: Add buffered input support") Signed-off-by: Cosmin Tanislav Link: https://lore.kernel.org/r/20220112200036.694490-1-cosmin.tanislav@analog.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7124.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c index bc2cfa5f959224..b400bbe291aa48 100644 --- a/drivers/iio/adc/ad7124.c +++ b/drivers/iio/adc/ad7124.c @@ -76,7 +76,7 @@ #define AD7124_CONFIG_REF_SEL(x) FIELD_PREP(AD7124_CONFIG_REF_SEL_MSK, x) #define AD7124_CONFIG_PGA_MSK GENMASK(2, 0) #define AD7124_CONFIG_PGA(x) FIELD_PREP(AD7124_CONFIG_PGA_MSK, x) -#define AD7124_CONFIG_IN_BUFF_MSK GENMASK(7, 6) +#define AD7124_CONFIG_IN_BUFF_MSK GENMASK(6, 5) #define AD7124_CONFIG_IN_BUFF(x) FIELD_PREP(AD7124_CONFIG_IN_BUFF_MSK, x) /* AD7124_FILTER_X */ From b0e85f95e30d4d2dc22ea123a30dba36406879a1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Nuno=20S=C3=A1?= Date: Fri, 14 Jan 2022 14:26:08 +0100 Subject: [PATCH 006/493] iio:imu:adis16480: fix buffering for devices with no burst mode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The trigger handler defined in the driver assumes that burst mode is being used. Hence, for devices that do not support it, we have to use the adis library default trigger implementation. Tested-by: Julia Pineda Fixes: 941f130881fa9 ("iio: adis16480: support burst read function") Signed-off-by: Nuno Sá Link: https://lore.kernel.org/r/20220114132608.241-1-nuno.sa@analog.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/imu/adis16480.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/iio/imu/adis16480.c b/drivers/iio/imu/adis16480.c index ed129321a14da1..f9b4540db1f437 100644 --- a/drivers/iio/imu/adis16480.c +++ b/drivers/iio/imu/adis16480.c @@ -1403,6 +1403,7 @@ static int adis16480_probe(struct spi_device *spi) { const struct spi_device_id *id = spi_get_device_id(spi); const struct adis_data *adis16480_data; + irq_handler_t trigger_handler = NULL; struct iio_dev *indio_dev; struct adis16480 *st; int ret; @@ -1474,8 +1475,12 @@ static int adis16480_probe(struct spi_device *spi) st->clk_freq = st->chip_info->int_clk; } + /* Only use our trigger handler if burst mode is supported */ + if (adis16480_data->burst_len) + trigger_handler = adis16480_trigger_handler; + ret = devm_adis_setup_buffer_and_trigger(&st->adis, indio_dev, - adis16480_trigger_handler); + trigger_handler); if (ret) return ret; From ccbed9d8d2a5351d8238f2d3f0741c9a3176f752 Mon Sep 17 00:00:00 2001 From: Sean Nyekjaer Date: Mon, 20 Dec 2021 13:51:43 +0100 Subject: [PATCH 007/493] iio: accel: fxls8962af: add padding to regmap for SPI Add missing don't care padding between address and data for SPI transfers Fixes: a3e0b51884ee ("iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers") Signed-off-by: Sean Nyekjaer Link: https://lore.kernel.org/r/20211220125144.3630539-1-sean@geanix.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/accel/fxls8962af-core.c | 12 ++++++++++-- drivers/iio/accel/fxls8962af-i2c.c | 2 +- drivers/iio/accel/fxls8962af-spi.c | 2 +- drivers/iio/accel/fxls8962af.h | 3 ++- 4 files changed, 14 insertions(+), 5 deletions(-) diff --git a/drivers/iio/accel/fxls8962af-core.c b/drivers/iio/accel/fxls8962af-core.c index 32989d91b9829e..f7fd9e046588bd 100644 --- a/drivers/iio/accel/fxls8962af-core.c +++ b/drivers/iio/accel/fxls8962af-core.c @@ -173,12 +173,20 @@ struct fxls8962af_data { u16 upper_thres; }; -const struct regmap_config fxls8962af_regmap_conf = { +const struct regmap_config fxls8962af_i2c_regmap_conf = { .reg_bits = 8, .val_bits = 8, .max_register = FXLS8962AF_MAX_REG, }; -EXPORT_SYMBOL_GPL(fxls8962af_regmap_conf); +EXPORT_SYMBOL_GPL(fxls8962af_i2c_regmap_conf); + +const struct regmap_config fxls8962af_spi_regmap_conf = { + .reg_bits = 8, + .pad_bits = 8, + .val_bits = 8, + .max_register = FXLS8962AF_MAX_REG, +}; +EXPORT_SYMBOL_GPL(fxls8962af_spi_regmap_conf); enum { fxls8962af_idx_x, diff --git a/drivers/iio/accel/fxls8962af-i2c.c b/drivers/iio/accel/fxls8962af-i2c.c index cfb004b2045598..6bde9891effbf1 100644 --- a/drivers/iio/accel/fxls8962af-i2c.c +++ b/drivers/iio/accel/fxls8962af-i2c.c @@ -18,7 +18,7 @@ static int fxls8962af_probe(struct i2c_client *client) { struct regmap *regmap; - regmap = devm_regmap_init_i2c(client, &fxls8962af_regmap_conf); + regmap = devm_regmap_init_i2c(client, &fxls8962af_i2c_regmap_conf); if (IS_ERR(regmap)) { dev_err(&client->dev, "Failed to initialize i2c regmap\n"); return PTR_ERR(regmap); diff --git a/drivers/iio/accel/fxls8962af-spi.c b/drivers/iio/accel/fxls8962af-spi.c index 57108d3d480b63..6f4dff3238d3c2 100644 --- a/drivers/iio/accel/fxls8962af-spi.c +++ b/drivers/iio/accel/fxls8962af-spi.c @@ -18,7 +18,7 @@ static int fxls8962af_probe(struct spi_device *spi) { struct regmap *regmap; - regmap = devm_regmap_init_spi(spi, &fxls8962af_regmap_conf); + regmap = devm_regmap_init_spi(spi, &fxls8962af_spi_regmap_conf); if (IS_ERR(regmap)) { dev_err(&spi->dev, "Failed to initialize spi regmap\n"); return PTR_ERR(regmap); diff --git a/drivers/iio/accel/fxls8962af.h b/drivers/iio/accel/fxls8962af.h index b67572c3ef0693..9cbe98c3ba9a29 100644 --- a/drivers/iio/accel/fxls8962af.h +++ b/drivers/iio/accel/fxls8962af.h @@ -17,6 +17,7 @@ int fxls8962af_core_probe(struct device *dev, struct regmap *regmap, int irq); int fxls8962af_core_remove(struct device *dev); extern const struct dev_pm_ops fxls8962af_pm_ops; -extern const struct regmap_config fxls8962af_regmap_conf; +extern const struct regmap_config fxls8962af_i2c_regmap_conf; +extern const struct regmap_config fxls8962af_spi_regmap_conf; #endif /* _FXLS8962AF_H_ */ From 817b8b9c5396d2b2d92311b46719aad5d3339dbe Mon Sep 17 00:00:00 2001 From: Dongliang Mu Date: Sat, 22 Jan 2022 17:48:26 +0800 Subject: [PATCH 008/493] HID: elo: fix memory leak in elo_probe When hid_parse() in elo_probe() fails, it forgets to call usb_put_dev to decrease the refcount. Fix this by adding usb_put_dev() in the error handling code of elo_probe(). Fixes: fbf42729d0e9 ("HID: elo: update the reference count of the usb device structure") Reported-by: syzkaller Signed-off-by: Dongliang Mu Signed-off-by: Jiri Kosina --- drivers/hid/hid-elo.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hid/hid-elo.c b/drivers/hid/hid-elo.c index 8e960d7b233b3a..9b42b0cdeef06b 100644 --- a/drivers/hid/hid-elo.c +++ b/drivers/hid/hid-elo.c @@ -262,6 +262,7 @@ static int elo_probe(struct hid_device *hdev, const struct hid_device_id *id) return 0; err_free: + usb_put_dev(udev); kfree(priv); return ret; } From ba1b71b008e97fd747845ff3a818420b11bbe830 Mon Sep 17 00:00:00 2001 From: Miaoqian Lin Date: Thu, 30 Dec 2021 07:27:51 +0000 Subject: [PATCH 009/493] mtd: rawnand: ingenic: Fix missing put_device in ingenic_ecc_get If of_find_device_by_node() succeeds, ingenic_ecc_get() doesn't have a corresponding put_device(). Thus add put_device() to fix the exception handling. Fixes: 15de8c6efd0e ("mtd: rawnand: ingenic: Separate top-level and SoC specific code") Signed-off-by: Miaoqian Lin Reviewed-by: Paul Cercueil Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20211230072751.21622-1-linmq006@gmail.com --- drivers/mtd/nand/raw/ingenic/ingenic_ecc.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_ecc.c b/drivers/mtd/nand/raw/ingenic/ingenic_ecc.c index efe0ffe4f1abc8..9054559e52dda6 100644 --- a/drivers/mtd/nand/raw/ingenic/ingenic_ecc.c +++ b/drivers/mtd/nand/raw/ingenic/ingenic_ecc.c @@ -68,9 +68,14 @@ static struct ingenic_ecc *ingenic_ecc_get(struct device_node *np) struct ingenic_ecc *ecc; pdev = of_find_device_by_node(np); - if (!pdev || !platform_get_drvdata(pdev)) + if (!pdev) return ERR_PTR(-EPROBE_DEFER); + if (!platform_get_drvdata(pdev)) { + put_device(&pdev->dev); + return ERR_PTR(-EPROBE_DEFER); + } + ecc = platform_get_drvdata(pdev); clk_prepare_enable(ecc->clk); From 5c23b3f965bc9ee696bf2ed4bdc54d339dd9a455 Mon Sep 17 00:00:00 2001 From: Bryan O'Donoghue Date: Mon, 3 Jan 2022 03:03:15 +0000 Subject: [PATCH 010/493] mtd: rawnand: qcom: Fix clock sequencing in qcom_nandc_probe() Interacting with a NAND chip on an IPQ6018 I found that the qcomsmem NAND partition parser was returning -EPROBE_DEFER waiting for the main smem driver to load. This caused the board to reset. Playing about with the probe() function shows that the problem lies in the core clock being switched off before the nandc_unalloc() routine has completed. If we look at how qcom_nandc_remove() tears down allocated resources we see the expected order is qcom_nandc_unalloc(nandc); clk_disable_unprepare(nandc->aon_clk); clk_disable_unprepare(nandc->core_clk); dma_unmap_resource(&pdev->dev, nandc->base_dma, resource_size(res), DMA_BIDIRECTIONAL, 0); Tweaking probe() to both bring up and tear-down in that order removes the reset if we end up deferring elsewhere. Fixes: c76b78d8ec05 ("mtd: nand: Qualcomm NAND controller driver") Signed-off-by: Bryan O'Donoghue Reviewed-by: Manivannan Sadhasivam Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220103030316.58301-2-bryan.odonoghue@linaro.org --- drivers/mtd/nand/raw/qcom_nandc.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c index 7c6efa3b625575..1a77542c6d67c6 100644 --- a/drivers/mtd/nand/raw/qcom_nandc.c +++ b/drivers/mtd/nand/raw/qcom_nandc.c @@ -2,7 +2,6 @@ /* * Copyright (c) 2016, The Linux Foundation. All rights reserved. */ - #include #include #include @@ -3073,10 +3072,6 @@ static int qcom_nandc_probe(struct platform_device *pdev) if (dma_mapping_error(dev, nandc->base_dma)) return -ENXIO; - ret = qcom_nandc_alloc(nandc); - if (ret) - goto err_nandc_alloc; - ret = clk_prepare_enable(nandc->core_clk); if (ret) goto err_core_clk; @@ -3085,6 +3080,10 @@ static int qcom_nandc_probe(struct platform_device *pdev) if (ret) goto err_aon_clk; + ret = qcom_nandc_alloc(nandc); + if (ret) + goto err_nandc_alloc; + ret = qcom_nandc_setup(nandc); if (ret) goto err_setup; @@ -3096,15 +3095,14 @@ static int qcom_nandc_probe(struct platform_device *pdev) return 0; err_setup: + qcom_nandc_unalloc(nandc); +err_nandc_alloc: clk_disable_unprepare(nandc->aon_clk); err_aon_clk: clk_disable_unprepare(nandc->core_clk); err_core_clk: - qcom_nandc_unalloc(nandc); -err_nandc_alloc: dma_unmap_resource(dev, res->start, resource_size(res), DMA_BIDIRECTIONAL, 0); - return ret; } From 079e6bdb2b1cc1da8b5c602229db782732668ae7 Mon Sep 17 00:00:00 2001 From: Bryan O'Donoghue Date: Mon, 3 Jan 2022 03:03:16 +0000 Subject: [PATCH 011/493] mtd: parsers: qcom: Don't print error message on -EPROBE_DEFER Its possible for the main smem driver to not be loaded by the time we come along to parse the smem partition description but, this is a perfectly normal thing. No need to print out an error message in this case. Signed-off-by: Bryan O'Donoghue Reviewed-by: Manivannan Sadhasivam Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220103030316.58301-3-bryan.odonoghue@linaro.org --- drivers/mtd/parsers/qcomsmempart.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/parsers/qcomsmempart.c b/drivers/mtd/parsers/qcomsmempart.c index 06a818cd2433f1..b2a57fe8479fa3 100644 --- a/drivers/mtd/parsers/qcomsmempart.c +++ b/drivers/mtd/parsers/qcomsmempart.c @@ -75,7 +75,8 @@ static int parse_qcomsmem_part(struct mtd_info *mtd, pr_debug("Parsing partition table info from SMEM\n"); ptable = qcom_smem_get(SMEM_APPS, SMEM_AARM_PARTITION_TABLE, &len); if (IS_ERR(ptable)) { - pr_err("Error reading partition table header\n"); + if (PTR_ERR(ptable) != -EPROBE_DEFER) + pr_err("Error reading partition table header\n"); return PTR_ERR(ptable); } From 65d003cca335cabc0160d3cd7daa689eaa9dd3cd Mon Sep 17 00:00:00 2001 From: Ansuel Smith Date: Sun, 16 Jan 2022 04:22:10 +0100 Subject: [PATCH 012/493] mtd: parsers: qcom: Fix kernel panic on skipped partition In the event of a skipped partition (case when the entry name is empty) the kernel panics in the cleanup function as the name entry is NULL. Rework the parser logic by first checking the real partition number and then allocate the space and set the data for the valid partitions. The logic was also fundamentally wrong as with a skipped partition, the parts number returned was incorrect by not decreasing it for the skipped partitions. Fixes: 803eb124e1a6 ("mtd: parsers: Add Qcom SMEM parser") Signed-off-by: Ansuel Smith Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220116032211.9728-1-ansuelsmth@gmail.com --- drivers/mtd/parsers/qcomsmempart.c | 31 ++++++++++++++++++------------ 1 file changed, 19 insertions(+), 12 deletions(-) diff --git a/drivers/mtd/parsers/qcomsmempart.c b/drivers/mtd/parsers/qcomsmempart.c index b2a57fe8479fa3..469d466f568f23 100644 --- a/drivers/mtd/parsers/qcomsmempart.c +++ b/drivers/mtd/parsers/qcomsmempart.c @@ -58,11 +58,11 @@ static int parse_qcomsmem_part(struct mtd_info *mtd, const struct mtd_partition **pparts, struct mtd_part_parser_data *data) { + size_t len = SMEM_FLASH_PTABLE_HDR_LEN; + int ret, i, j, tmpparts, numparts = 0; struct smem_flash_pentry *pentry; struct smem_flash_ptable *ptable; - size_t len = SMEM_FLASH_PTABLE_HDR_LEN; struct mtd_partition *parts; - int ret, i, numparts; char *name, *c; if (IS_ENABLED(CONFIG_MTD_SPI_NOR_USE_4K_SECTORS) @@ -88,8 +88,8 @@ static int parse_qcomsmem_part(struct mtd_info *mtd, } /* Ensure that # of partitions is less than the max we have allocated */ - numparts = le32_to_cpu(ptable->numparts); - if (numparts > SMEM_FLASH_PTABLE_MAX_PARTS_V4) { + tmpparts = le32_to_cpu(ptable->numparts); + if (tmpparts > SMEM_FLASH_PTABLE_MAX_PARTS_V4) { pr_err("Partition numbers exceed the max limit\n"); return -EINVAL; } @@ -117,11 +117,17 @@ static int parse_qcomsmem_part(struct mtd_info *mtd, return PTR_ERR(ptable); } + for (i = 0; i < tmpparts; i++) { + pentry = &ptable->pentry[i]; + if (pentry->name[0] != '\0') + numparts++; + } + parts = kcalloc(numparts, sizeof(*parts), GFP_KERNEL); if (!parts) return -ENOMEM; - for (i = 0; i < numparts; i++) { + for (i = 0, j = 0; i < tmpparts; i++) { pentry = &ptable->pentry[i]; if (pentry->name[0] == '\0') continue; @@ -136,24 +142,25 @@ static int parse_qcomsmem_part(struct mtd_info *mtd, for (c = name; *c != '\0'; c++) *c = tolower(*c); - parts[i].name = name; - parts[i].offset = le32_to_cpu(pentry->offset) * mtd->erasesize; - parts[i].mask_flags = pentry->attr; - parts[i].size = le32_to_cpu(pentry->length) * mtd->erasesize; + parts[j].name = name; + parts[j].offset = le32_to_cpu(pentry->offset) * mtd->erasesize; + parts[j].mask_flags = pentry->attr; + parts[j].size = le32_to_cpu(pentry->length) * mtd->erasesize; pr_debug("%d: %s offs=0x%08x size=0x%08x attr:0x%08x\n", i, pentry->name, le32_to_cpu(pentry->offset), le32_to_cpu(pentry->length), pentry->attr); + j++; } pr_debug("SMEM partition table found: ver: %d len: %d\n", - le32_to_cpu(ptable->version), numparts); + le32_to_cpu(ptable->version), tmpparts); *pparts = parts; return numparts; out_free_parts: - while (--i >= 0) - kfree(parts[i].name); + while (--j >= 0) + kfree(parts[j].name); kfree(parts); *pparts = NULL; From 3dd8ba961b9356c4113b96541c752c73d98fef70 Mon Sep 17 00:00:00 2001 From: Ansuel Smith Date: Sun, 16 Jan 2022 04:22:11 +0100 Subject: [PATCH 013/493] mtd: parsers: qcom: Fix missing free for pparts in cleanup Mtdpart doesn't free pparts when a cleanup function is declared. Add missing free for pparts in cleanup function for smem to fix the leak. Fixes: 10f3b4d79958 ("mtd: parsers: qcom: Fix leaking of partition name") Signed-off-by: Ansuel Smith Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220116032211.9728-2-ansuelsmth@gmail.com --- drivers/mtd/parsers/qcomsmempart.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mtd/parsers/qcomsmempart.c b/drivers/mtd/parsers/qcomsmempart.c index 469d466f568f23..4311b89d8df005 100644 --- a/drivers/mtd/parsers/qcomsmempart.c +++ b/drivers/mtd/parsers/qcomsmempart.c @@ -174,6 +174,8 @@ static void parse_qcomsmem_cleanup(const struct mtd_partition *pparts, for (i = 0; i < nr_parts; i++) kfree(pparts[i].name); + + kfree(pparts); } static const struct of_device_id qcomsmem_of_match_table[] = { From 4cd335dae3cf25412427938d8abbaf04d46e63b5 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 18 Jan 2022 14:35:25 +0200 Subject: [PATCH 014/493] mtd: rawnand: omap2: Prevent invalid configuration and build error We need to select MEMORY as well otherwise OMAP_GPMC will not be built. For simplicity let's select MEMORY and OMAP_GPMC unconditionally as this driver depends on OMAP_GPMC driver and uses symbols from there. Fixes: dbcb124acebd ("mtd: rawnand: omap2: Select GPMC device driver for ARCH_K3") Reported-by: kernel test robot Signed-off-by: Roger Quadros Reviewed-by: Krzysztof Kozlowski Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220118123525.8020-1-rogerq@kernel.org --- drivers/mtd/nand/raw/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index 20408b7db54065..d986ab4e4c35fd 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -42,7 +42,8 @@ config MTD_NAND_OMAP2 tristate "OMAP2, OMAP3, OMAP4 and Keystone NAND controller" depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST depends on HAS_IOMEM - select OMAP_GPMC if ARCH_K3 + select MEMORY + select OMAP_GPMC help Support for NAND flash on Texas Instruments OMAP2, OMAP3, OMAP4 and Keystone platforms. From 3e3765875b1b8864898603768fd5c93eeb552211 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 21 Jan 2022 14:55:05 +0300 Subject: [PATCH 015/493] mtd: phram: Prevent divide by zero bug in phram_setup() The problem is that "erasesize" is a uint64_t type so it might be non-zero but the lower 32 bits are zero so when it's truncated, "(uint32_t)erasesize", then that value is zero. This leads to a divide by zero bug. Avoid the bug by delaying the divide until after we have validated that "erasesize" is non-zero and within the uint32_t range. Fixes: dc2b3e5cbc80 ("mtd: phram: use div_u64_rem to stop overwrite len in phram_setup") Signed-off-by: Dan Carpenter Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220121115505.GI1978@kadam --- drivers/mtd/devices/phram.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c index 6ed6c51fac69e8..d503821a3e6061 100644 --- a/drivers/mtd/devices/phram.c +++ b/drivers/mtd/devices/phram.c @@ -264,16 +264,20 @@ static int phram_setup(const char *val) } } - if (erasesize) - div_u64_rem(len, (uint32_t)erasesize, &rem); - if (len == 0 || erasesize == 0 || erasesize > len - || erasesize > UINT_MAX || rem) { + || erasesize > UINT_MAX) { parse_err("illegal erasesize or len\n"); ret = -EINVAL; goto error; } + div_u64_rem(len, (uint32_t)erasesize, &rem); + if (rem) { + parse_err("len is not multiple of erasesize\n"); + ret = -EINVAL; + goto error; + } + ret = register_device(name, start, len, (uint32_t)erasesize); if (ret) goto error; From 9161f365c91614e5a3f5c6dcc44c3b1b33bc59c0 Mon Sep 17 00:00:00 2001 From: Christian Eggers Date: Tue, 25 Jan 2022 09:16:19 +0100 Subject: [PATCH 016/493] mtd: rawnand: gpmi: don't leak PM reference in error path If gpmi_nfc_apply_timings() fails, the PM runtime usage counter must be dropped. Reported-by: Pavel Machek Fixes: f53d4c109a66 ("mtd: rawnand: gpmi: Add ERR007117 protection for nfc_apply_timings") Signed-off-by: Christian Eggers Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220125081619.6286-1-ceggers@arri.de --- drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c index 1b64c5a5140d5b..ded4df47392808 100644 --- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c @@ -2285,7 +2285,7 @@ static int gpmi_nfc_exec_op(struct nand_chip *chip, this->hw.must_apply_timings = false; ret = gpmi_nfc_apply_timings(this); if (ret) - return ret; + goto out_pm; } dev_dbg(this->dev, "%s: %d instructions\n", __func__, op->ninstrs); @@ -2414,6 +2414,7 @@ static int gpmi_nfc_exec_op(struct nand_chip *chip, this->bch = false; +out_pm: pm_runtime_mark_last_busy(this->dev); pm_runtime_put_autosuspend(this->dev); From 22d7ee32f1fb6d51ef8cf657c6685ca04745755a Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Thu, 23 Dec 2021 17:46:50 +0300 Subject: [PATCH 017/493] gpu: host1x: Fix hang on Tegra186+ Tegra186+ hangs if host1x hardware is disabled at a kernel boot time because we touch hardware before runtime PM is resumed. Move sync point assignment initialization to the RPM-resume callback. Older SoCs were unaffected because they skip that sync point initialization. Tested-by: Jon Hunter # T186 Reported-by: Jon Hunter # T186 Fixes: 6b6776e2ab8a ("gpu: host1x: Add initial runtime PM and OPP support") Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding --- drivers/gpu/host1x/syncpt.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/host1x/syncpt.c b/drivers/gpu/host1x/syncpt.c index e08e331e46aea7..83a16e46146b78 100644 --- a/drivers/gpu/host1x/syncpt.c +++ b/drivers/gpu/host1x/syncpt.c @@ -137,8 +137,15 @@ void host1x_syncpt_restore(struct host1x *host) struct host1x_syncpt *sp_base = host->syncpt; unsigned int i; - for (i = 0; i < host1x_syncpt_nb_pts(host); i++) + for (i = 0; i < host1x_syncpt_nb_pts(host); i++) { + /* + * Unassign syncpt from channels for purposes of Tegra186 + * syncpoint protection. This prevents any channel from + * accessing it until it is reassigned. + */ + host1x_hw_syncpt_assign_to_channel(host, sp_base + i, NULL); host1x_hw_syncpt_restore(host, sp_base + i); + } for (i = 0; i < host1x_syncpt_nb_bases(host); i++) host1x_hw_syncpt_restore_wait_base(host, sp_base + i); @@ -352,13 +359,6 @@ int host1x_syncpt_init(struct host1x *host) for (i = 0; i < host->info->nb_pts; i++) { syncpt[i].id = i; syncpt[i].host = host; - - /* - * Unassign syncpt from channels for purposes of Tegra186 - * syncpoint protection. This prevents any channel from - * accessing it until it is reassigned. - */ - host1x_hw_syncpt_assign_to_channel(host, &syncpt[i], NULL); } for (i = 0; i < host->info->nb_bases; i++) From 9129886b88185962538180625ca8051362b01327 Mon Sep 17 00:00:00 2001 From: John David Anglin Date: Sat, 22 Jan 2022 18:19:49 +0000 Subject: [PATCH 018/493] parisc: Drop __init from map_pages declaration With huge kernel pages, we randomly eat a SPARC in map_pages(). This is fixed by dropping __init from the declaration. However, map_pages references the __init routine memblock_alloc_try_nid via memblock_alloc. Thus, it needs to be marked with __ref. memblock_alloc is only called before the kernel text is set to readonly. The __ref on free_initmem is no longer needed. Comment regarding map_pages being in the init section is removed. Signed-off-by: John David Anglin Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Helge Deller --- arch/parisc/mm/init.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index 1ae31db9988f56..1dc2e88e7b04fc 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -337,9 +337,9 @@ static void __init setup_bootmem(void) static bool kernel_set_to_readonly; -static void __init map_pages(unsigned long start_vaddr, - unsigned long start_paddr, unsigned long size, - pgprot_t pgprot, int force) +static void __ref map_pages(unsigned long start_vaddr, + unsigned long start_paddr, unsigned long size, + pgprot_t pgprot, int force) { pmd_t *pmd; pte_t *pg_table; @@ -449,7 +449,7 @@ void __init set_kernel_text_rw(int enable_read_write) flush_tlb_all(); } -void __ref free_initmem(void) +void free_initmem(void) { unsigned long init_begin = (unsigned long)__init_begin; unsigned long init_end = (unsigned long)__init_end; @@ -463,7 +463,6 @@ void __ref free_initmem(void) /* The init text pages are marked R-X. We have to * flush the icache and mark them RW- * - * This is tricky, because map_pages is in the init section. * Do a dummy remap of the data section first (the data * section is already PAGE_KERNEL) to pull in the TLB entries * for map_kernel */ From b7d6f44a0fa716a82969725516dc0b16bc7cd514 Mon Sep 17 00:00:00 2001 From: John David Anglin Date: Wed, 26 Jan 2022 20:39:05 +0000 Subject: [PATCH 019/493] parisc: Fix data TLB miss in sba_unmap_sg Rolf Eike Beer reported the following bug: [1274934.746891] Bad Address (null pointer deref?): Code=15 (Data TLB miss fault) at addr 0000004140000018 [1274934.746891] CPU: 3 PID: 5549 Comm: cmake Not tainted 5.15.4-gentoo-parisc64 #4 [1274934.746891] Hardware name: 9000/785/C8000 [1274934.746891] [1274934.746891] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI [1274934.746891] PSW: 00001000000001001111111000001110 Not tainted [1274934.746891] r00-03 000000ff0804fe0e 0000000040bc9bc0 00000000406760e4 0000004140000000 [1274934.746891] r04-07 0000000040b693c0 0000004140000000 000000004a2b08b0 0000000000000001 [1274934.746891] r08-11 0000000041f98810 0000000000000000 000000004a0a7000 0000000000000001 [1274934.746891] r12-15 0000000040bddbc0 0000000040c0cbc0 0000000040bddbc0 0000000040bddbc0 [1274934.746891] r16-19 0000000040bde3c0 0000000040bddbc0 0000000040bde3c0 0000000000000007 [1274934.746891] r20-23 0000000000000006 000000004a368950 0000000000000000 0000000000000001 [1274934.746891] r24-27 0000000000001fff 000000000800000e 000000004a1710f0 0000000040b693c0 [1274934.746891] r28-31 0000000000000001 0000000041f988b0 0000000041f98840 000000004a171118 [1274934.746891] sr00-03 00000000066e5800 0000000000000000 0000000000000000 00000000066e5800 [1274934.746891] sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [1274934.746891] [1274934.746891] IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000406760e8 00000000406760ec [1274934.746891] IIR: 48780030 ISR: 0000000000000000 IOR: 0000004140000018 [1274934.746891] CPU: 3 CR30: 00000040e3a9c000 CR31: ffffffffffffffff [1274934.746891] ORIG_R28: 0000000040acdd58 [1274934.746891] IAOQ[0]: sba_unmap_sg+0xb0/0x118 [1274934.746891] IAOQ[1]: sba_unmap_sg+0xb4/0x118 [1274934.746891] RP(r2): sba_unmap_sg+0xac/0x118 [1274934.746891] Backtrace: [1274934.746891] [<00000000402740cc>] dma_unmap_sg_attrs+0x6c/0x70 [1274934.746891] [<000000004074d6bc>] scsi_dma_unmap+0x54/0x60 [1274934.746891] [<00000000407a3488>] mptscsih_io_done+0x150/0xd70 [1274934.746891] [<0000000040798600>] mpt_interrupt+0x168/0xa68 [1274934.746891] [<0000000040255a48>] __handle_irq_event_percpu+0xc8/0x278 [1274934.746891] [<0000000040255c34>] handle_irq_event_percpu+0x3c/0xd8 [1274934.746891] [<000000004025ecb4>] handle_percpu_irq+0xb4/0xf0 [1274934.746891] [<00000000402548e0>] generic_handle_irq+0x50/0x70 [1274934.746891] [<000000004019a254>] call_on_stack+0x18/0x24 [1274934.746891] [1274934.746891] Kernel panic - not syncing: Bad Address (null pointer deref?) The bug is caused by overrunning the sglist and incorrectly testing sg_dma_len(sglist) before nents. Normally this doesn't cause a crash, but in this case sglist crossed a page boundary. This occurs in the following code: while (sg_dma_len(sglist) && nents--) { The fix is simply to test nents first and move the decrement of nents into the loop. Reported-by: Rolf Eike Beer Signed-off-by: John David Anglin Cc: stable@vger.kernel.org Signed-off-by: Helge Deller --- drivers/parisc/sba_iommu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c index e60690d38d677a..374b9199878d41 100644 --- a/drivers/parisc/sba_iommu.c +++ b/drivers/parisc/sba_iommu.c @@ -1047,7 +1047,7 @@ sba_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents, spin_unlock_irqrestore(&ioc->res_lock, flags); #endif - while (sg_dma_len(sglist) && nents--) { + while (nents && sg_dma_len(sglist)) { sba_unmap_page(dev, sg_dma_address(sglist), sg_dma_len(sglist), direction, 0); @@ -1056,6 +1056,7 @@ sba_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents, ioc->usingle_calls--; /* kluge since call is unmap_sg() */ #endif ++sglist; + nents--; } DBG_RUN_SG("%s() DONE (nents %d)\n", __func__, nents); From d7da660cab47183cded65e11b64497d0f56c6edf Mon Sep 17 00:00:00 2001 From: John David Anglin Date: Thu, 27 Jan 2022 22:33:41 +0000 Subject: [PATCH 020/493] parisc: Fix sglist access in ccio-dma.c This patch implements the same bug fix to ccio-dma.c as to sba_iommu.c. It ensures that only the allocated entries of the sglist are accessed. Signed-off-by: John David Anglin Cc: stable@vger.kernel.org Signed-off-by: Helge Deller --- drivers/parisc/ccio-dma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index 059566f5442919..9be007c9420f9e 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -1003,7 +1003,7 @@ ccio_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents, ioc->usg_calls++; #endif - while(sg_dma_len(sglist) && nents--) { + while (nents && sg_dma_len(sglist)) { #ifdef CCIO_COLLECT_STATS ioc->usg_pages += sg_dma_len(sglist) >> PAGE_SHIFT; @@ -1011,6 +1011,7 @@ ccio_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents, ccio_unmap_page(dev, sg_dma_address(sglist), sg_dma_len(sglist), direction, 0); ++sglist; + nents--; } DBG_RUN_SG("%s() DONE (nents %d)\n", __func__, nents); From 665408f4c3a5c83e712871daa062721624b2b79e Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Tue, 18 Jan 2022 15:45:14 +0000 Subject: [PATCH 021/493] brcmfmac: firmware: Fix crash in brcm_alt_fw_path The call to brcm_alt_fw_path in brcmf_fw_get_firmwares is not protected by a check to the validity of the fwctx->req->board_type pointer. This results in a crash in strlcat when, for example, the WLAN chip is found in a USB dongle. Prevent the crash by adding the necessary check. See: https://github.com/raspberrypi/linux/issues/4833 Fixes: 5ff013914c62 ("brcmfmac: firmware: Allow per-board firmware binaries") Signed-off-by: Phil Elwell Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20220118154514.3245524-1-phil@raspberrypi.com --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c index 0eb13e5df51775..d99140960a8206 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c @@ -693,7 +693,7 @@ int brcmf_fw_get_firmwares(struct device *dev, struct brcmf_fw_request *req, { struct brcmf_fw_item *first = &req->items[0]; struct brcmf_fw *fwctx; - char *alt_path; + char *alt_path = NULL; int ret; brcmf_dbg(TRACE, "enter: dev=%s\n", dev_name(dev)); @@ -712,7 +712,9 @@ int brcmf_fw_get_firmwares(struct device *dev, struct brcmf_fw_request *req, fwctx->done = fw_cb; /* First try alternative board-specific path if any */ - alt_path = brcm_alt_fw_path(first->path, fwctx->req->board_type); + if (fwctx->req->board_type) + alt_path = brcm_alt_fw_path(first->path, + fwctx->req->board_type); if (alt_path) { ret = request_firmware_nowait(THIS_MODULE, true, alt_path, fwctx->dev, GFP_KERNEL, fwctx, From a1cba0e2deeb0fe5200602658ed1078a714f8667 Mon Sep 17 00:00:00 2001 From: Muhammad Usama Anjum Date: Wed, 5 Jan 2022 02:09:20 +0500 Subject: [PATCH 022/493] iio: frequency: admv1013: remove the always true condition unsigned int variable is always greater than or equal to zero. Make the if condition simple. Signed-off-by: Muhammad Usama Anjum Fixes: da35a7b526d9 ("iio: frequency: admv1013: add support for ADMV1013") Link: https://lore.kernel.org/r/YdS3gJYtECMaDDjA@debian-BULLSEYE-live-builder-AMD64 Signed-off-by: Jonathan Cameron --- drivers/iio/frequency/admv1013.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/frequency/admv1013.c b/drivers/iio/frequency/admv1013.c index 6cdeb50143afc5..3f3c478e9baab3 100644 --- a/drivers/iio/frequency/admv1013.c +++ b/drivers/iio/frequency/admv1013.c @@ -348,7 +348,7 @@ static int admv1013_update_mixer_vgate(struct admv1013_state *st) vcm = regulator_get_voltage(st->reg); - if (vcm >= 0 && vcm < 1800000) + if (vcm < 1800000) mixer_vgate = (2389 * vcm / 1000000 + 8100) / 100; else if (vcm > 1800000 && vcm < 2600000) mixer_vgate = (2375 * vcm / 1000000 + 125) / 100; From e0a2e37f303828d030a83f33ffe14b36cb88d563 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sat, 29 Jan 2022 09:32:47 +0100 Subject: [PATCH 023/493] iio: adc: men_z188_adc: Fix a resource leak in an error handling path If iio_device_register() fails, a previous ioremap() is left unbalanced. Update the error handling path and add the missing iounmap() call, as already done in the remove function. Fixes: 74aeac4da66f ("iio: adc: Add MEN 16z188 ADC driver") Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/320fc777863880247c2aff4a9d1a54ba69abf080.1643445149.git.christophe.jaillet@wanadoo.fr Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/men_z188_adc.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/iio/adc/men_z188_adc.c b/drivers/iio/adc/men_z188_adc.c index 42ea8bc7e78051..adc5ceaef8c93a 100644 --- a/drivers/iio/adc/men_z188_adc.c +++ b/drivers/iio/adc/men_z188_adc.c @@ -103,6 +103,7 @@ static int men_z188_probe(struct mcb_device *dev, struct z188_adc *adc; struct iio_dev *indio_dev; struct resource *mem; + int ret; indio_dev = devm_iio_device_alloc(&dev->dev, sizeof(struct z188_adc)); if (!indio_dev) @@ -128,8 +129,14 @@ static int men_z188_probe(struct mcb_device *dev, adc->mem = mem; mcb_set_drvdata(dev, indio_dev); - return iio_device_register(indio_dev); + ret = iio_device_register(indio_dev); + if (ret) + goto err_unmap; + + return 0; +err_unmap: + iounmap(adc->base); err: mcb_release_mem(mem); return -ENXIO; From e7a3290d330e3f8cf06a3cad455c49e89183137b Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Wed, 12 Jan 2022 12:34:56 -0800 Subject: [PATCH 024/493] iio: addac: ad74413r: Do not reference negative array offsets Instead of aiming rx_buf at an invalid array-boundary-crossing location, just skip the first increment. Seen when building with -Warray-bounds: drivers/iio/addac/ad74413r.c: In function 'ad74413r_update_scan_mode': drivers/iio/addac/ad74413r.c:843:22: warning: array subscript -4 is below array bounds of 'u8[16]' { aka 'unsigned char[16]'} [-Warray-bounds] 843 | u8 *rx_buf = &st->adc_samples_buf.rx_buf[-1 * AD74413R_FRAME_SIZE]; | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/iio/addac/ad74413r.c:84:20: note: while referencing 'rx_buf' 84 | u8 rx_buf[AD74413R_FRAME_SIZE * AD74413R_CHANNEL_MAX]; | ^~~~~~ Cc: Lars-Peter Clausen Cc: Michael Hennerich Cc: Jonathan Cameron Cc: linux-iio@vger.kernel.org Fixes: fea251b6a5db ("iio: addac: add AD74413R driver") Reviewed-by: Cosmin Tanislav Signed-off-by: Kees Cook Link: https://lore.kernel.org/r/20220112203456.3950884-1-keescook@chromium.org Signed-off-by: Jonathan Cameron --- drivers/iio/addac/ad74413r.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/iio/addac/ad74413r.c b/drivers/iio/addac/ad74413r.c index 5271073bb74e77..aba9a643a4ca7c 100644 --- a/drivers/iio/addac/ad74413r.c +++ b/drivers/iio/addac/ad74413r.c @@ -840,7 +840,7 @@ static int ad74413r_update_scan_mode(struct iio_dev *indio_dev, { struct ad74413r_state *st = iio_priv(indio_dev); struct spi_transfer *xfer = st->adc_samples_xfer; - u8 *rx_buf = &st->adc_samples_buf.rx_buf[-1 * AD74413R_FRAME_SIZE]; + u8 *rx_buf = st->adc_samples_buf.rx_buf; u8 *tx_buf = st->adc_samples_tx_buf; unsigned int channel; int ret = -EINVAL; @@ -894,9 +894,10 @@ static int ad74413r_update_scan_mode(struct iio_dev *indio_dev, spi_message_add_tail(xfer, &st->adc_samples_msg); - xfer++; tx_buf += AD74413R_FRAME_SIZE; - rx_buf += AD74413R_FRAME_SIZE; + if (xfer != st->adc_samples_xfer) + rx_buf += AD74413R_FRAME_SIZE; + xfer++; } xfer->rx_buf = rx_buf; From 8a3e4a5614adab30b6e0eb7dbd8ef737aabbb8eb Mon Sep 17 00:00:00 2001 From: Cosmin Tanislav Date: Tue, 11 Jan 2022 09:47:01 +0200 Subject: [PATCH 025/493] iio: addac: ad74413r: use ngpio size when iterating over mask ngpio is the actual number of GPIOs handled by the GPIO chip, as opposed to the max number of GPIOs. Fixes: fea251b6a5db ("iio: addac: add AD74413R driver") Signed-off-by: Cosmin Tanislav Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220111074703.3677392-1-cosmin.tanislav@analog.com Signed-off-by: Jonathan Cameron --- drivers/iio/addac/ad74413r.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/addac/ad74413r.c b/drivers/iio/addac/ad74413r.c index aba9a643a4ca7c..4f4dce42f20ec8 100644 --- a/drivers/iio/addac/ad74413r.c +++ b/drivers/iio/addac/ad74413r.c @@ -288,7 +288,7 @@ static void ad74413r_gpio_set_multiple(struct gpio_chip *chip, unsigned int offset = 0; int ret; - for_each_set_bit_from(offset, mask, AD74413R_CHANNEL_MAX) { + for_each_set_bit_from(offset, mask, chip->ngpio) { unsigned int real_offset = st->gpo_gpio_offsets[offset]; ret = ad74413r_set_gpo_config(st, real_offset, @@ -334,7 +334,7 @@ static int ad74413r_gpio_get_multiple(struct gpio_chip *chip, if (ret) return ret; - for_each_set_bit_from(offset, mask, AD74413R_CHANNEL_MAX) { + for_each_set_bit_from(offset, mask, chip->ngpio) { unsigned int real_offset = st->comp_gpio_offsets[offset]; if (val & BIT(real_offset)) From 4165456fe6b7719c0c9626022a7d96c381c94e6f Mon Sep 17 00:00:00 2001 From: Cosmin Tanislav Date: Tue, 11 Jan 2022 09:47:02 +0200 Subject: [PATCH 026/493] iio: addac: ad74413r: correct comparator gpio getters mask usage The value of the GPIOs is currently altered using offsets rather than masks. Make use of __assign_bit and the BIT macro to turn the offsets into masks. Fixes: fea251b6a5db ("iio: addac: add AD74413R driver") Signed-off-by: Cosmin Tanislav Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220111074703.3677392-2-cosmin.tanislav@analog.com Signed-off-by: Jonathan Cameron --- drivers/iio/addac/ad74413r.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/iio/addac/ad74413r.c b/drivers/iio/addac/ad74413r.c index 4f4dce42f20ec8..acd230a6af35a7 100644 --- a/drivers/iio/addac/ad74413r.c +++ b/drivers/iio/addac/ad74413r.c @@ -134,7 +134,6 @@ struct ad74413r_state { #define AD74413R_CH_EN_MASK(x) BIT(x) #define AD74413R_REG_DIN_COMP_OUT 0x25 -#define AD74413R_DIN_COMP_OUT_SHIFT_X(x) x #define AD74413R_REG_ADC_RESULT_X(x) (0x26 + (x)) #define AD74413R_ADC_RESULT_MAX GENMASK(15, 0) @@ -316,7 +315,7 @@ static int ad74413r_gpio_get(struct gpio_chip *chip, unsigned int offset) if (ret) return ret; - status &= AD74413R_DIN_COMP_OUT_SHIFT_X(real_offset); + status &= BIT(real_offset); return status ? 1 : 0; } @@ -337,8 +336,7 @@ static int ad74413r_gpio_get_multiple(struct gpio_chip *chip, for_each_set_bit_from(offset, mask, chip->ngpio) { unsigned int real_offset = st->comp_gpio_offsets[offset]; - if (val & BIT(real_offset)) - *bits |= offset; + __assign_bit(offset, bits, val & BIT(real_offset)); } return ret; From 632fe0bb8c5b9c06ec961f575ee42a6fff5eceeb Mon Sep 17 00:00:00 2001 From: Miaoqian Lin Date: Thu, 6 Jan 2022 11:23:09 +0000 Subject: [PATCH 027/493] iio: Fix error handling for PM The pm_runtime_enable will increase power disable depth. If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). In the PM Runtime docs: Drivers in ->remove() callback should undo the runtime PM changes done in ->probe(). Usually this means calling pm_runtime_disable(), pm_runtime_dont_use_autosuspend() etc. We should do this in error handling. Fix this problem for the following drivers: bmc150, bmg160, kmx61, kxcj-1013, mma9551, mma9553. Fixes: 7d0ead5c3f00 ("iio: Reconcile operation order between iio_register/unregister and pm functions") Signed-off-by: Miaoqian Lin Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220106112309.16879-1-linmq006@gmail.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/accel/bmc150-accel-core.c | 5 ++++- drivers/iio/accel/kxcjk-1013.c | 5 ++++- drivers/iio/accel/mma9551.c | 5 ++++- drivers/iio/accel/mma9553.c | 5 ++++- drivers/iio/gyro/bmg160_core.c | 5 ++++- drivers/iio/imu/kmx61.c | 5 ++++- drivers/iio/magnetometer/bmc150_magn.c | 5 +++-- 7 files changed, 27 insertions(+), 8 deletions(-) diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c index e6081dd0a8800c..d11f668016a6aa 100644 --- a/drivers/iio/accel/bmc150-accel-core.c +++ b/drivers/iio/accel/bmc150-accel-core.c @@ -1783,11 +1783,14 @@ int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq, ret = iio_device_register(indio_dev); if (ret < 0) { dev_err(dev, "Unable to register iio device\n"); - goto err_trigger_unregister; + goto err_pm_cleanup; } return 0; +err_pm_cleanup: + pm_runtime_dont_use_autosuspend(dev); + pm_runtime_disable(dev); err_trigger_unregister: bmc150_accel_unregister_triggers(data, BMC150_ACCEL_TRIGGERS - 1); err_buffer_cleanup: diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c index 0fe57031684827..ac74cdcd2bc8c9 100644 --- a/drivers/iio/accel/kxcjk-1013.c +++ b/drivers/iio/accel/kxcjk-1013.c @@ -1590,11 +1590,14 @@ static int kxcjk1013_probe(struct i2c_client *client, ret = iio_device_register(indio_dev); if (ret < 0) { dev_err(&client->dev, "unable to register iio device\n"); - goto err_buffer_cleanup; + goto err_pm_cleanup; } return 0; +err_pm_cleanup: + pm_runtime_dont_use_autosuspend(&client->dev); + pm_runtime_disable(&client->dev); err_buffer_cleanup: iio_triggered_buffer_cleanup(indio_dev); err_trigger_unregister: diff --git a/drivers/iio/accel/mma9551.c b/drivers/iio/accel/mma9551.c index 4c359fb0548018..c53a3398b14c4a 100644 --- a/drivers/iio/accel/mma9551.c +++ b/drivers/iio/accel/mma9551.c @@ -495,11 +495,14 @@ static int mma9551_probe(struct i2c_client *client, ret = iio_device_register(indio_dev); if (ret < 0) { dev_err(&client->dev, "unable to register iio device\n"); - goto out_poweroff; + goto err_pm_cleanup; } return 0; +err_pm_cleanup: + pm_runtime_dont_use_autosuspend(&client->dev); + pm_runtime_disable(&client->dev); out_poweroff: mma9551_set_device_state(client, false); diff --git a/drivers/iio/accel/mma9553.c b/drivers/iio/accel/mma9553.c index 0570ab1cc06436..5ff6bc70708b64 100644 --- a/drivers/iio/accel/mma9553.c +++ b/drivers/iio/accel/mma9553.c @@ -1134,12 +1134,15 @@ static int mma9553_probe(struct i2c_client *client, ret = iio_device_register(indio_dev); if (ret < 0) { dev_err(&client->dev, "unable to register iio device\n"); - goto out_poweroff; + goto err_pm_cleanup; } dev_dbg(&indio_dev->dev, "Registered device %s\n", name); return 0; +err_pm_cleanup: + pm_runtime_dont_use_autosuspend(&client->dev); + pm_runtime_disable(&client->dev); out_poweroff: mma9551_set_device_state(client, false); return ret; diff --git a/drivers/iio/gyro/bmg160_core.c b/drivers/iio/gyro/bmg160_core.c index 17b939a367ad04..81a6d09788bd7c 100644 --- a/drivers/iio/gyro/bmg160_core.c +++ b/drivers/iio/gyro/bmg160_core.c @@ -1188,11 +1188,14 @@ int bmg160_core_probe(struct device *dev, struct regmap *regmap, int irq, ret = iio_device_register(indio_dev); if (ret < 0) { dev_err(dev, "unable to register iio device\n"); - goto err_buffer_cleanup; + goto err_pm_cleanup; } return 0; +err_pm_cleanup: + pm_runtime_dont_use_autosuspend(dev); + pm_runtime_disable(dev); err_buffer_cleanup: iio_triggered_buffer_cleanup(indio_dev); err_trigger_unregister: diff --git a/drivers/iio/imu/kmx61.c b/drivers/iio/imu/kmx61.c index 1dabfd615dabff..f89724481df932 100644 --- a/drivers/iio/imu/kmx61.c +++ b/drivers/iio/imu/kmx61.c @@ -1385,7 +1385,7 @@ static int kmx61_probe(struct i2c_client *client, ret = iio_device_register(data->acc_indio_dev); if (ret < 0) { dev_err(&client->dev, "Failed to register acc iio device\n"); - goto err_buffer_cleanup_mag; + goto err_pm_cleanup; } ret = iio_device_register(data->mag_indio_dev); @@ -1398,6 +1398,9 @@ static int kmx61_probe(struct i2c_client *client, err_iio_unregister_acc: iio_device_unregister(data->acc_indio_dev); +err_pm_cleanup: + pm_runtime_dont_use_autosuspend(&client->dev); + pm_runtime_disable(&client->dev); err_buffer_cleanup_mag: if (client->irq > 0) iio_triggered_buffer_cleanup(data->mag_indio_dev); diff --git a/drivers/iio/magnetometer/bmc150_magn.c b/drivers/iio/magnetometer/bmc150_magn.c index f96f531753495f..3d4d21f979fab0 100644 --- a/drivers/iio/magnetometer/bmc150_magn.c +++ b/drivers/iio/magnetometer/bmc150_magn.c @@ -962,13 +962,14 @@ int bmc150_magn_probe(struct device *dev, struct regmap *regmap, ret = iio_device_register(indio_dev); if (ret < 0) { dev_err(dev, "unable to register iio device\n"); - goto err_disable_runtime_pm; + goto err_pm_cleanup; } dev_dbg(dev, "Registered device %s\n", name); return 0; -err_disable_runtime_pm: +err_pm_cleanup: + pm_runtime_dont_use_autosuspend(dev); pm_runtime_disable(dev); err_buffer_cleanup: iio_triggered_buffer_cleanup(indio_dev); From a72c01a94f1d285a274219d36e2a17b4846c0615 Mon Sep 17 00:00:00 2001 From: Jiasheng Jiang Date: Wed, 5 Jan 2022 16:15:59 +0800 Subject: [PATCH 028/493] mac80211: mlme: check for null after calling kmemdup As the possible failure of the alloc, the ifmgd->assoc_req_ies might be NULL pointer returned from kmemdup(). Therefore it might be better to free the skb and return error in order to fail the association, like ieee80211_assoc_success(). Also, the caller, ieee80211_do_assoc(), needs to deal with the return value from ieee80211_send_assoc(). Fixes: 4d9ec73d2b78 ("cfg80211: Report Association Request frame IEs in association events") Signed-off-by: Jiasheng Jiang Link: https://lore.kernel.org/r/20220105081559.2387083-1-jiasheng@iscas.ac.cn [fix some paths to be errors, not success] Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 1eeabdf1005241..e5ccf17618ab2f 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -666,7 +666,7 @@ static void ieee80211_add_he_ie(struct ieee80211_sub_if_data *sdata, ieee80211_ie_build_he_6ghz_cap(sdata, skb); } -static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata) +static int ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; @@ -686,6 +686,7 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata) enum nl80211_iftype iftype = ieee80211_vif_type_p2p(&sdata->vif); const struct ieee80211_sband_iftype_data *iftd; struct ieee80211_prep_tx_info info = {}; + int ret; /* we know it's writable, cast away the const */ if (assoc_data->ie_len) @@ -699,7 +700,7 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata) chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); if (WARN_ON(!chanctx_conf)) { rcu_read_unlock(); - return; + return -EINVAL; } chan = chanctx_conf->def.chan; rcu_read_unlock(); @@ -750,7 +751,7 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata) (iftd ? iftd->vendor_elems.len : 0), GFP_KERNEL); if (!skb) - return; + return -ENOMEM; skb_reserve(skb, local->hw.extra_tx_headroom); @@ -1031,15 +1032,22 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata) skb_put_data(skb, assoc_data->ie + offset, noffset - offset); } - if (assoc_data->fils_kek_len && - fils_encrypt_assoc_req(skb, assoc_data) < 0) { - dev_kfree_skb(skb); - return; + if (assoc_data->fils_kek_len) { + ret = fils_encrypt_assoc_req(skb, assoc_data); + if (ret < 0) { + dev_kfree_skb(skb); + return ret; + } } pos = skb_tail_pointer(skb); kfree(ifmgd->assoc_req_ies); ifmgd->assoc_req_ies = kmemdup(ie_start, pos - ie_start, GFP_ATOMIC); + if (!ifmgd->assoc_req_ies) { + dev_kfree_skb(skb); + return -ENOMEM; + } + ifmgd->assoc_req_ies_len = pos - ie_start; drv_mgd_prepare_tx(local, sdata, &info); @@ -1049,6 +1057,8 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata) IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS | IEEE80211_TX_INTFL_MLME_CONN_TX; ieee80211_tx_skb(sdata, skb); + + return 0; } void ieee80211_send_pspoll(struct ieee80211_local *local, @@ -4497,6 +4507,7 @@ static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata) { struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data; struct ieee80211_local *local = sdata->local; + int ret; sdata_assert_lock(sdata); @@ -4517,7 +4528,9 @@ static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata) sdata_info(sdata, "associate with %pM (try %d/%d)\n", assoc_data->bss->bssid, assoc_data->tries, IEEE80211_ASSOC_MAX_TRIES); - ieee80211_send_assoc(sdata); + ret = ieee80211_send_assoc(sdata); + if (ret) + return ret; if (!ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) { assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT; From 42a79960ffa50bfe9e0bf5d6280be89bf563a5dd Mon Sep 17 00:00:00 2001 From: Benjamin Beichler Date: Tue, 11 Jan 2022 22:13:26 +0000 Subject: [PATCH 029/493] mac80211_hwsim: report NOACK frames in tx_status Add IEEE80211_TX_STAT_NOACK_TRANSMITTED to tx_status flags to have proper statistics for non-acked frames. Signed-off-by: Benjamin Beichler Link: https://lore.kernel.org/r/20220111221327.1499881-1-benjamin.beichler@uni-rostock.de Signed-off-by: Johannes Berg --- drivers/net/wireless/mac80211_hwsim.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 8d54f9face2f4b..efa0400cd9ef97 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -3770,6 +3770,10 @@ static int hwsim_tx_info_frame_received_nl(struct sk_buff *skb_2, } txi->flags |= IEEE80211_TX_STAT_ACK; } + + if (hwsim_flags & HWSIM_TX_CTL_NO_ACK) + txi->flags |= IEEE80211_TX_STAT_NOACK_TRANSMITTED; + ieee80211_tx_status_irqsafe(data2->hw, skb); return 0; out: From cacfddf82baf1470e5741edeecb187260868f195 Mon Sep 17 00:00:00 2001 From: JaeMan Park Date: Thu, 13 Jan 2022 15:02:35 +0900 Subject: [PATCH 030/493] mac80211_hwsim: initialize ieee80211_tx_info at hw_scan_work In mac80211_hwsim, the probe_req frame is created and sent while scanning. It is sent with ieee80211_tx_info which is not initialized. Uninitialized ieee80211_tx_info can cause problems when using mac80211_hwsim with wmediumd. wmediumd checks the tx_rates field of ieee80211_tx_info and doesn't relay probe_req frame to other clients even if it is a broadcasting message. Call ieee80211_tx_prepare_skb() to initialize ieee80211_tx_info for the probe_req that is created by hw_scan_work in mac80211_hwsim. Signed-off-by: JaeMan Park Link: https://lore.kernel.org/r/20220113060235.546107-1-jaeman@google.com [fix memory leak] Signed-off-by: Johannes Berg --- drivers/net/wireless/mac80211_hwsim.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index efa0400cd9ef97..fc5725f6daee69 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -2336,6 +2336,15 @@ static void hw_scan_work(struct work_struct *work) if (req->ie_len) skb_put_data(probe, req->ie, req->ie_len); + if (!ieee80211_tx_prepare_skb(hwsim->hw, + hwsim->hw_scan_vif, + probe, + hwsim->tmp_chan->band, + NULL)) { + kfree_skb(probe); + continue; + } + local_bh_disable(); mac80211_hwsim_tx_frame(hwsim->hw, probe, hwsim->tmp_chan); From fa4300f060e5c4ca670b705f1e9b93685ad30c5b Mon Sep 17 00:00:00 2001 From: Frank Rowand Date: Thu, 27 Jan 2022 13:26:43 -0600 Subject: [PATCH 031/493] of: unittest: update text of expected warnings The text of various warning messages triggered by unittest has changed. Update the text of expected warnings to match. The expected vs actual warnings are most easily seen by filtering the boot console messages with the of_unittest_expect program at https://github.com/frowand/dt_tools.git. The filter prefixes problem lines with '***', and prefixes lines that match expected errors with 'ok '. All other lines are prefixed with ' '. Unrelated lines have been deleted in the following examples. The mismatch appears as: -> ### dt-test ### start of unittest - you will see error messages OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1 OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1 OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found -1 platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found ** of_unittest_expect WARNING - not found ---> platform testcase-data:testcase-device2: IRQ index 0 not found -> ### dt-test ### end of unittest - 254 passed, 0 failed ** EXPECT statistics: ** ** EXPECT found : 42 ** EXPECT not found : 4 With this commit applied, the mismatch is resolved: -> ### dt-test ### start of unittest - you will see error messages ok OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ok OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ok OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1 ok platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found -> ### dt-test ### end of unittest - 254 passed, 0 failed ** EXPECT statistics: ** ** EXPECT found : 46 ** EXPECT not found : 0 Fixes: 2043727c2882 ("driver core: platform: Make use of the helper function dev_err_probe()") Fixes: 94a4950a4acf ("of: base: Fix phandle argument length mismatch error message") Signed-off-by: Frank Rowand Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20220127192643.2534941-1-frowand.list@gmail.com --- drivers/of/unittest.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c index 70992103c07d77..2c2fb161b57270 100644 --- a/drivers/of/unittest.c +++ b/drivers/of/unittest.c @@ -513,24 +513,24 @@ static void __init of_unittest_parse_phandle_with_args(void) memset(&args, 0, sizeof(args)); EXPECT_BEGIN(KERN_INFO, - "OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1"); + "OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1"); rc = of_parse_phandle_with_args(np, "phandle-list-bad-args", "#phandle-cells", 1, &args); EXPECT_END(KERN_INFO, - "OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1"); + "OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1"); unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc); EXPECT_BEGIN(KERN_INFO, - "OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1"); + "OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1"); rc = of_count_phandle_with_args(np, "phandle-list-bad-args", "#phandle-cells"); EXPECT_END(KERN_INFO, - "OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1"); + "OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1"); unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc); } @@ -670,12 +670,12 @@ static void __init of_unittest_parse_phandle_with_args_map(void) memset(&args, 0, sizeof(args)); EXPECT_BEGIN(KERN_INFO, - "OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found -1"); + "OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1"); rc = of_parse_phandle_with_args_map(np, "phandle-list-bad-args", "phandle", 1, &args); EXPECT_END(KERN_INFO, - "OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found -1"); + "OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1"); unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc); } @@ -1257,12 +1257,12 @@ static void __init of_unittest_platform_populate(void) unittest(pdev, "device 2 creation failed\n"); EXPECT_BEGIN(KERN_INFO, - "platform testcase-data:testcase-device2: IRQ index 0 not found"); + "platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found"); irq = platform_get_irq(pdev, 0); EXPECT_END(KERN_INFO, - "platform testcase-data:testcase-device2: IRQ index 0 not found"); + "platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found"); unittest(irq < 0 && irq != -EPROBE_DEFER, "device parsing error failed - %d\n", irq); From 533da5077b63485ba88f5bb03fd6a93048a9a72d Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Fri, 28 Jan 2022 15:58:38 +0200 Subject: [PATCH 032/493] MAINTAINERS: mark ath6kl as orphan I don't have time to maintain ath6kl anymore so mark it as orphan. Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20220128135841.1926-1-kvalo@kernel.org --- MAINTAINERS | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index f41088418aae25..ba8c466a540327 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3133,11 +3133,9 @@ W: https://wireless.wiki.kernel.org/en/users/Drivers/ath5k F: drivers/net/wireless/ath/ath5k/ ATHEROS ATH6KL WIRELESS DRIVER -M: Kalle Valo L: linux-wireless@vger.kernel.org -S: Supported +S: Orphan W: https://wireless.wiki.kernel.org/en/users/Drivers/ath6kl -T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git F: drivers/net/wireless/ath/ath6kl/ ATI_REMOTE2 DRIVER From 3451613c338bfecb3e037f79db4bbfa51f7a0236 Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Fri, 28 Jan 2022 15:58:39 +0200 Subject: [PATCH 033/493] MAINTAINERS: change Loic as wcn36xx maintainer I don't have time for being wcn36xx maintainer but Loic is willing to step up. Thanks Loic! Also remove Eugene's old tree, it has not been used for a long time. Signed-off-by: Kalle Valo Acked-by: Loic Poulain Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20220128135841.1926-2-kvalo@kernel.org --- MAINTAINERS | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index ba8c466a540327..f57dcc8862c5fa 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16081,11 +16081,10 @@ F: Documentation/devicetree/bindings/media/*venus* F: drivers/media/platform/qcom/venus/ QUALCOMM WCN36XX WIRELESS DRIVER -M: Kalle Valo +M: Loic Poulain L: wcn36xx@lists.infradead.org S: Supported W: https://wireless.wiki.kernel.org/en/users/Drivers/wcn36xx -T: git git://github.com/KrasnikovEugene/wcn36xx.git F: drivers/net/wireless/ath/wcn36xx/ QUANTENNA QTNFMAC WIRELESS DRIVER From e2ac75e0619b8db32447bb592f4a5b9e9d990c57 Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Fri, 28 Jan 2022 15:58:40 +0200 Subject: [PATCH 034/493] MAINTAINERS: hand over ath9k maintainership to Toke MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In practise I have been the only maintainer for ath9k for some time now but I don't really have time for it. Luckily Toke is willing to look after so mark him as maintainer. Thanks Toke! Signed-off-by: Kalle Valo Acked-by: Toke Høiland-Jørgensen Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20220128135841.1926-3-kvalo@kernel.org --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index f57dcc8862c5fa..37573c9af10aa8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15898,9 +15898,9 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git F: drivers/net/wireless/ath/ath11k/ QUALCOMM ATHEROS ATH9K WIRELESS DRIVER -M: ath9k-devel@qca.qualcomm.com +M: Toke Høiland-Jørgensen L: linux-wireless@vger.kernel.org -S: Supported +S: Maintained W: https://wireless.wiki.kernel.org/en/users/Drivers/ath9k F: Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml F: drivers/net/wireless/ath/ath9k/ From fcda1cb81663b5fb846803607e1d0a3180d1a5d4 Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Fri, 28 Jan 2022 15:58:41 +0200 Subject: [PATCH 035/493] MAINTAINERS: add DT bindings files for ath10k and ath11k The DT bindings files were missing for ath10k and ath11k so add them now. Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20220128135841.1926-4-kvalo@kernel.org --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 37573c9af10aa8..67e0bb93076cb2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15889,6 +15889,7 @@ S: Supported W: https://wireless.wiki.kernel.org/en/users/Drivers/ath10k T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git F: drivers/net/wireless/ath/ath10k/ +F: Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt QUALCOMM ATHEROS ATH11K WIRELESS DRIVER M: Kalle Valo @@ -15896,6 +15897,7 @@ L: ath11k@lists.infradead.org S: Supported T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git F: drivers/net/wireless/ath/ath11k/ +F: Documentation/devicetree/bindings/net/wireless/qcom,ath11k.txt QUALCOMM ATHEROS ATH9K WIRELESS DRIVER M: Toke Høiland-Jørgensen From 36415a7964711822e63695ea67fede63979054d9 Mon Sep 17 00:00:00 2001 From: david regan Date: Wed, 26 Jan 2022 23:43:44 +0100 Subject: [PATCH 036/493] mtd: rawnand: brcmnand: Fixed incorrect sub-page ECC status The brcmnand driver contains a bug in which if a page (example 2k byte) is read from the parallel/ONFI NAND and within that page a subpage (512 byte) has correctable errors which is followed by a subpage with uncorrectable errors, the page read will return the wrong status of correctable (as opposed to the actual status of uncorrectable.) The bug is in function brcmnand_read_by_pio where there is a check for uncorrectable bits which will be preempted if a previous status for correctable bits is detected. The fix is to stop checking for bad bits only if we already have a bad bits status. Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: david regan Reviewed-by: Florian Fainelli Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/trinity-478e0c09-9134-40e8-8f8c-31c371225eda-1643237024774@3c-app-mailcom-lxa02 --- drivers/mtd/nand/raw/brcmnand/brcmnand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c index f75929783b9419..aee78f5f4f1561 100644 --- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c +++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c @@ -2106,7 +2106,7 @@ static int brcmnand_read_by_pio(struct mtd_info *mtd, struct nand_chip *chip, mtd->oobsize / trans, host->hwcfg.sector_size_1k); - if (!ret) { + if (ret != -EBADMSG) { *err_addr = brcmnand_get_uncorrecc_addr(ctrl); if (*err_addr) From da5462a4dc446e7028e6d150a4b02684d1d3ea81 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 17 Jan 2022 18:15:22 -0800 Subject: [PATCH 037/493] power: supply: fix table problem in sysfs-class-power MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add a bottom table border to complete the table format and prevent a documentation build warning. Documentation/ABI/testing/sysfs-class-power:459: WARNING: Malformed table. No bottom table border found. Fixes: 1b0b6cc8030d0 ("power: supply: add charge_behaviour attributes") Signed-off-by: Randy Dunlap Cc: Thomas Weißschuh Cc: Hans de Goede Cc: Sebastian Reichel Cc: linux-pm@vger.kernel.org Cc: Stephen Rothwell Signed-off-by: Sebastian Reichel --- Documentation/ABI/testing/sysfs-class-power | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power index fde21d900420cb..85950136677769 100644 --- a/Documentation/ABI/testing/sysfs-class-power +++ b/Documentation/ABI/testing/sysfs-class-power @@ -468,6 +468,7 @@ Description: auto: Charge normally, respect thresholds inhibit-charge: Do not charge while AC is attached force-discharge: Force discharge while AC is attached + ================ ==================================== What: /sys/class/power_supply//technology Date: May 2007 From 2b56a9a28a6bf09890a43161402948ed62963f36 Mon Sep 17 00:00:00 2001 From: Yang Li Date: Wed, 5 Jan 2022 10:37:00 +0800 Subject: [PATCH 038/493] power: supply: core: fix application of sizeof to pointer The coccinelle check report: ./drivers/power/supply/cw2015_battery.c:692:12-18: ERROR: application of sizeof to pointer Reported-by: Abaci Robot Fixes: 25fd330370ac ("power: supply_core: Pass pointer to battery info") Signed-off-by: Yang Li Reviewed-by: Linus Walleij Signed-off-by: Sebastian Reichel --- drivers/power/supply/cw2015_battery.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/power/supply/cw2015_battery.c b/drivers/power/supply/cw2015_battery.c index 0c87ad0dbf710b..728e2a6cc9c310 100644 --- a/drivers/power/supply/cw2015_battery.c +++ b/drivers/power/supply/cw2015_battery.c @@ -689,7 +689,7 @@ static int cw_bat_probe(struct i2c_client *client) if (ret) { /* Allocate an empty battery */ cw_bat->battery = devm_kzalloc(&client->dev, - sizeof(cw_bat->battery), + sizeof(*cw_bat->battery), GFP_KERNEL); if (!cw_bat->battery) return -ENOMEM; From 2787710f73fcce4a9bdab540aaf1aef778a27462 Mon Sep 17 00:00:00 2001 From: Daniel Thompson Date: Fri, 28 Jan 2022 17:46:25 +0000 Subject: [PATCH 039/493] HID: i2c-hid: goodix: Fix a lockdep splat I'm was on the receiving end of a lockdep splat from this driver and after scratching my head I couldn't be entirely sure it was a false positive given we would also have to think about whether the regulator locking is safe (since the notifier is called whilst holding regulator locks which are also needed for regulator_is_enabled() ). Regardless of whether it is a real bug or not, the mutex isn't needed. We can use reference counting tricks instead to avoid races with the notifier calls. The observed splat follows: ------------------------------------------------------ kworker/u16:3/127 is trying to acquire lock: ffff00008021fb20 (&ihid_goodix->regulator_mutex){+.+.}-{4:4}, at: ihid_goodix_vdd_notify+0x30/0x94 but task is already holding lock: ffff0000835c60c0 (&(&rdev->notifier)->rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x30/0x70 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&(&rdev->notifier)->rwsem){++++}-{4:4}: down_write+0x68/0x8c blocking_notifier_chain_register+0x54/0x70 regulator_register_notifier+0x1c/0x24 devm_regulator_register_notifier+0x58/0x98 i2c_hid_of_goodix_probe+0xdc/0x158 i2c_device_probe+0x25d/0x270 really_probe+0x174/0x2cc __driver_probe_device+0xc0/0xd8 driver_probe_device+0x50/0xe4 __device_attach_driver+0xa8/0xc0 bus_for_each_drv+0x9c/0xc0 __device_attach_async_helper+0x6c/0xbc async_run_entry_fn+0x38/0x100 process_one_work+0x294/0x438 worker_thread+0x180/0x258 kthread+0x120/0x130 ret_from_fork+0x10/0x20 -> #0 (&ihid_goodix->regulator_mutex){+.+.}-{4:4}: __lock_acquire+0xd24/0xfe8 lock_acquire+0x288/0x2f4 __mutex_lock+0xa0/0x338 mutex_lock_nested+0x3c/0x5c ihid_goodix_vdd_notify+0x30/0x94 notifier_call_chain+0x6c/0x8c blocking_notifier_call_chain+0x48/0x70 _notifier_call_chain.isra.0+0x18/0x20 _regulator_enable+0xc0/0x178 regulator_enable+0x40/0x7c goodix_i2c_hid_power_up+0x18/0x20 i2c_hid_core_power_up.isra.0+0x1c/0x2c i2c_hid_core_probe+0xd8/0x3d4 i2c_hid_of_goodix_probe+0x14c/0x158 i2c_device_probe+0x25c/0x270 really_probe+0x174/0x2cc __driver_probe_device+0xc0/0xd8 driver_probe_device+0x50/0xe4 __device_attach_driver+0xa8/0xc0 bus_for_each_drv+0x9c/0xc0 __device_attach_async_helper+0x6c/0xbc async_run_entry_fn+0x38/0x100 process_one_work+0x294/0x438 worker_thread+0x180/0x258 kthread+0x120/0x130 ret_from_fork+0x10/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&rdev->notifier)->rwsem); lock(&ihid_goodix->regulator_mutex); lock(&(&rdev->notifier)->rwsem); lock(&ihid_goodix->regulator_mutex); *** DEADLOCK *** Signed-off-by: Daniel Thompson Fixes: 18eeef46d359 ("HID: i2c-hid: goodix: Tie the reset line to true state of the regulator") Reviewed-by: Douglas Anderson Signed-off-by: Jiri Kosina --- drivers/hid/i2c-hid/i2c-hid-of-goodix.c | 28 +++++++++++-------------- 1 file changed, 12 insertions(+), 16 deletions(-) diff --git a/drivers/hid/i2c-hid/i2c-hid-of-goodix.c b/drivers/hid/i2c-hid/i2c-hid-of-goodix.c index b4dad66fa954d4..ec6c73f75ffe02 100644 --- a/drivers/hid/i2c-hid/i2c-hid-of-goodix.c +++ b/drivers/hid/i2c-hid/i2c-hid-of-goodix.c @@ -27,7 +27,6 @@ struct i2c_hid_of_goodix { struct regulator *vdd; struct notifier_block nb; - struct mutex regulator_mutex; struct gpio_desc *reset_gpio; const struct goodix_i2c_hid_timing_data *timings; }; @@ -67,8 +66,6 @@ static int ihid_goodix_vdd_notify(struct notifier_block *nb, container_of(nb, struct i2c_hid_of_goodix, nb); int ret = NOTIFY_OK; - mutex_lock(&ihid_goodix->regulator_mutex); - switch (event) { case REGULATOR_EVENT_PRE_DISABLE: gpiod_set_value_cansleep(ihid_goodix->reset_gpio, 1); @@ -87,8 +84,6 @@ static int ihid_goodix_vdd_notify(struct notifier_block *nb, break; } - mutex_unlock(&ihid_goodix->regulator_mutex); - return ret; } @@ -102,8 +97,6 @@ static int i2c_hid_of_goodix_probe(struct i2c_client *client, if (!ihid_goodix) return -ENOMEM; - mutex_init(&ihid_goodix->regulator_mutex); - ihid_goodix->ops.power_up = goodix_i2c_hid_power_up; ihid_goodix->ops.power_down = goodix_i2c_hid_power_down; @@ -130,25 +123,28 @@ static int i2c_hid_of_goodix_probe(struct i2c_client *client, * long. Holding the controller in reset apparently draws extra * power. */ - mutex_lock(&ihid_goodix->regulator_mutex); ihid_goodix->nb.notifier_call = ihid_goodix_vdd_notify; ret = devm_regulator_register_notifier(ihid_goodix->vdd, &ihid_goodix->nb); - if (ret) { - mutex_unlock(&ihid_goodix->regulator_mutex); + if (ret) return dev_err_probe(&client->dev, ret, "regulator notifier request failed\n"); - } /* * If someone else is holding the regulator on (or the regulator is * an always-on one) we might never be told to deassert reset. Do it - * now. Here we'll assume that someone else might have _just - * barely_ turned the regulator on so we'll do the full - * "post_power_delay" just in case. + * now... and temporarily bump the regulator reference count just to + * make sure it is impossible for this to race with our own notifier! + * We also assume that someone else might have _just barely_ turned + * the regulator on so we'll do the full "post_power_delay" just in + * case. */ - if (ihid_goodix->reset_gpio && regulator_is_enabled(ihid_goodix->vdd)) + if (ihid_goodix->reset_gpio && regulator_is_enabled(ihid_goodix->vdd)) { + ret = regulator_enable(ihid_goodix->vdd); + if (ret) + return ret; goodix_i2c_hid_deassert_reset(ihid_goodix, true); - mutex_unlock(&ihid_goodix->regulator_mutex); + regulator_disable(ihid_goodix->vdd); + } return i2c_hid_core_probe(client, &ihid_goodix->ops, 0x0001, 0); } From a7072c01c3ac3ae6ecd08fa7b43431cfc8ed331f Mon Sep 17 00:00:00 2001 From: Basavaraj Natikar Date: Mon, 31 Jan 2022 22:48:32 +0530 Subject: [PATCH 040/493] HID: amd_sfh: Increase sensor command timeout HPD sensors take more time to initialize. Hence increasing sensor command timeout to get response with status within a max timeout. Fixes: 173709f50e98 ("HID: amd_sfh: Add command response to check command status") Signed-off-by: Basavaraj Natikar Signed-off-by: Jiri Kosina --- drivers/hid/amd-sfh-hid/amd_sfh_pcie.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c index 2503be0253d3e6..d3f32ffe299a8c 100644 --- a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c +++ b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c @@ -37,11 +37,11 @@ static int amd_sfh_wait_response_v2(struct amd_mp2_dev *mp2, u8 sid, u32 sensor_ { union cmd_response cmd_resp; - /* Get response with status within a max of 800 ms timeout */ + /* Get response with status within a max of 1600 ms timeout */ if (!readl_poll_timeout(mp2->mmio + AMD_P2C_MSG(0), cmd_resp.resp, (cmd_resp.response_v2.response == sensor_sts && cmd_resp.response_v2.status == 0 && (sid == 0xff || - cmd_resp.response_v2.sensor_id == sid)), 500, 800000)) + cmd_resp.response_v2.sensor_id == sid)), 500, 1600000)) return cmd_resp.response_v2.response; return SENSOR_DISABLED; From 91aaea527bc3b707c5d3208cde035421ed54f79c Mon Sep 17 00:00:00 2001 From: Basavaraj Natikar Date: Mon, 31 Jan 2022 22:48:33 +0530 Subject: [PATCH 041/493] HID: amd_sfh: Add illuminance mask to limit ALS max value ALS illuminance value present only in first 15 bits from SFH firmware for V2 platforms. Hence added a mask of 15 bit to limit ALS max illuminance values to get correct illuminance value. Fixes: 0aad9c95eb9a ("HID: amd_sfh: Extend ALS support for newer AMD platform") Signed-off-by: Basavaraj Natikar Signed-off-by: Jiri Kosina --- drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_desc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_desc.c b/drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_desc.c index be41f83b0289ce..76095bd53c655a 100644 --- a/drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_desc.c +++ b/drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_desc.c @@ -27,6 +27,7 @@ #define HID_USAGE_SENSOR_STATE_READY_ENUM 0x02 #define HID_USAGE_SENSOR_STATE_INITIALIZING_ENUM 0x05 #define HID_USAGE_SENSOR_EVENT_DATA_UPDATED_ENUM 0x04 +#define ILLUMINANCE_MASK GENMASK(14, 0) int get_report_descriptor(int sensor_idx, u8 *rep_desc) { @@ -246,7 +247,8 @@ u8 get_input_report(u8 current_index, int sensor_idx, int report_id, struct amd_ get_common_inputs(&als_input.common_property, report_id); /* For ALS ,V2 Platforms uses C2P_MSG5 register instead of DRAM access method */ if (supported_input == V2_STATUS) - als_input.illuminance_value = (int)readl(privdata->mmio + AMD_C2P_MSG(5)); + als_input.illuminance_value = + readl(privdata->mmio + AMD_C2P_MSG(5)) & ILLUMINANCE_MASK; else als_input.illuminance_value = (int)sensor_virt_addr[0] / AMD_SFH_FW_MULTIPLIER; From 564778d7b1ea465f9487eedeece7527a033549c5 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 1 Feb 2022 15:56:26 +0000 Subject: [PATCH 042/493] ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw() When writing out a stereo control we discard the change notification from the first channel, meaning that events are only generated based on changes to the second channel. Ensure that we report a change if either channel has changed. Signed-off-by: Mark Brown Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220201155629.120510-2-broonie@kernel.org Signed-off-by: Mark Brown --- sound/soc/soc-ops.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/sound/soc/soc-ops.c b/sound/soc/soc-ops.c index 9833611b83d1fc..2ce73e3391f4bd 100644 --- a/sound/soc/soc-ops.c +++ b/sound/soc/soc-ops.c @@ -308,7 +308,7 @@ int snd_soc_put_volsw(struct snd_kcontrol *kcontrol, unsigned int sign_bit = mc->sign_bit; unsigned int mask = (1 << fls(max)) - 1; unsigned int invert = mc->invert; - int err; + int err, ret; bool type_2r = false; unsigned int val2 = 0; unsigned int val, val_mask; @@ -350,12 +350,18 @@ int snd_soc_put_volsw(struct snd_kcontrol *kcontrol, err = snd_soc_component_update_bits(component, reg, val_mask, val); if (err < 0) return err; + ret = err; - if (type_2r) + if (type_2r) { err = snd_soc_component_update_bits(component, reg2, val_mask, - val2); + val2); + /* Don't discard any error code or drop change flag */ + if (ret == 0 || err < 0) { + ret = err; + } + } - return err; + return ret; } EXPORT_SYMBOL_GPL(snd_soc_put_volsw); From 7f3d90a3519680dfa23e750f80bfdefc0f5eda4a Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 1 Feb 2022 15:56:27 +0000 Subject: [PATCH 043/493] ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw_sx() When writing out a stereo control we discard the change notification from the first channel, meaning that events are only generated based on changes to the second channel. Ensure that we report a change if either channel has changed. Signed-off-by: Mark Brown Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220201155629.120510-3-broonie@kernel.org Signed-off-by: Mark Brown --- sound/soc/soc-ops.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/soc-ops.c b/sound/soc/soc-ops.c index 2ce73e3391f4bd..4987c58cd59a6c 100644 --- a/sound/soc/soc-ops.c +++ b/sound/soc/soc-ops.c @@ -427,6 +427,7 @@ int snd_soc_put_volsw_sx(struct snd_kcontrol *kcontrol, int min = mc->min; unsigned int mask = (1U << (fls(min + max) - 1)) - 1; int err = 0; + int ret; unsigned int val, val_mask; if (ucontrol->value.integer.value[0] < 0) @@ -443,6 +444,7 @@ int snd_soc_put_volsw_sx(struct snd_kcontrol *kcontrol, err = snd_soc_component_update_bits(component, reg, val_mask, val); if (err < 0) return err; + ret = err; if (snd_soc_volsw_is_stereo(mc)) { unsigned int val2; @@ -453,6 +455,11 @@ int snd_soc_put_volsw_sx(struct snd_kcontrol *kcontrol, err = snd_soc_component_update_bits(component, reg2, val_mask, val2); + + /* Don't discard any error code or drop change flag */ + if (ret == 0 || err < 0) { + ret = err; + } } return err; } From 650204ded3703b5817bd4b6a77fa47d333c4f902 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 1 Feb 2022 15:56:28 +0000 Subject: [PATCH 044/493] ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw_range() When writing out a stereo control we discard the change notification from the first channel, meaning that events are only generated based on changes to the second channel. Ensure that we report a change if either channel has changed. Signed-off-by: Mark Brown Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220201155629.120510-4-broonie@kernel.org Signed-off-by: Mark Brown --- sound/soc/soc-ops.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/sound/soc/soc-ops.c b/sound/soc/soc-ops.c index 4987c58cd59a6c..2e57f814bcc282 100644 --- a/sound/soc/soc-ops.c +++ b/sound/soc/soc-ops.c @@ -519,7 +519,7 @@ int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol, unsigned int mask = (1 << fls(max)) - 1; unsigned int invert = mc->invert; unsigned int val, val_mask; - int ret; + int err, ret; if (invert) val = (max - ucontrol->value.integer.value[0]) & mask; @@ -528,9 +528,10 @@ int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol, val_mask = mask << shift; val = val << shift; - ret = snd_soc_component_update_bits(component, reg, val_mask, val); - if (ret < 0) - return ret; + err = snd_soc_component_update_bits(component, reg, val_mask, val); + if (err < 0) + return err; + ret = err; if (snd_soc_volsw_is_stereo(mc)) { if (invert) @@ -540,8 +541,12 @@ int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol, val_mask = mask << shift; val = val << shift; - ret = snd_soc_component_update_bits(component, rreg, val_mask, + err = snd_soc_component_update_bits(component, rreg, val_mask, val); + /* Don't discard any error code or drop change flag */ + if (ret == 0 || err < 0) { + ret = err; + } } return ret; From 2b7c46369f09c358164d31d17e5695185403185e Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 1 Feb 2022 15:56:29 +0000 Subject: [PATCH 045/493] ASoC: ops: Fix stereo change notifications in snd_soc_put_xr_sx() When writing out a stereo control we discard the change notification from the first channel, meaning that events are only generated based on changes to the second channel. Ensure that we report a change if either channel has changed. Signed-off-by: Mark Brown Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220201155629.120510-5-broonie@kernel.org Signed-off-by: Mark Brown --- sound/soc/soc-ops.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/sound/soc/soc-ops.c b/sound/soc/soc-ops.c index 2e57f814bcc282..03ea9591fb164e 100644 --- a/sound/soc/soc-ops.c +++ b/sound/soc/soc-ops.c @@ -895,6 +895,7 @@ int snd_soc_put_xr_sx(struct snd_kcontrol *kcontrol, unsigned long mask = (1UL<nbits)-1; long max = mc->max; long val = ucontrol->value.integer.value[0]; + int ret = 0; unsigned int i; if (val < mc->min || val > mc->max) @@ -909,9 +910,11 @@ int snd_soc_put_xr_sx(struct snd_kcontrol *kcontrol, regmask, regval); if (err < 0) return err; + if (err > 0) + ret = err; } - return 0; + return ret; } EXPORT_SYMBOL_GPL(snd_soc_put_xr_sx); From 7fa5c33d043160eba3be9fb8e21588dff2a467c7 Mon Sep 17 00:00:00 2001 From: V sujith kumar Reddy Date: Tue, 1 Feb 2022 02:02:15 +0530 Subject: [PATCH 046/493] ASoC: amd: acp: Set gpio_spkr_en to None for max speaker amplifer in machine driver Maxim codec driver already enabling/disabling spk_en_gpio in form of sd_mode gpio hence remove such gpio access control from machine driver to avoid conflict Signed-off-by: V sujith kumar Reddy Link: https://lore.kernel.org/r/20220131203225.1418648-1-vsujithkumar.reddy@amd.com Signed-off-by: Mark Brown --- sound/soc/amd/acp/acp-mach.h | 1 - sound/soc/amd/acp/acp-sof-mach.c | 4 ++-- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/sound/soc/amd/acp/acp-mach.h b/sound/soc/amd/acp/acp-mach.h index fd6299844ebe40..c855f50d6b34cc 100644 --- a/sound/soc/amd/acp/acp-mach.h +++ b/sound/soc/amd/acp/acp-mach.h @@ -21,7 +21,6 @@ #include #define EN_SPKR_GPIO_GB 0x11F -#define EN_SPKR_GPIO_NK 0x146 #define EN_SPKR_GPIO_NONE -EINVAL enum be_id { diff --git a/sound/soc/amd/acp/acp-sof-mach.c b/sound/soc/amd/acp/acp-sof-mach.c index 07de4614265594..4cc431e54fe1a0 100644 --- a/sound/soc/amd/acp/acp-sof-mach.c +++ b/sound/soc/amd/acp/acp-sof-mach.c @@ -37,7 +37,7 @@ static struct acp_card_drvdata sof_rt5682_max_data = { .hs_codec_id = RT5682, .amp_codec_id = MAX98360A, .dmic_codec_id = DMIC, - .gpio_spkr_en = EN_SPKR_GPIO_NK, + .gpio_spkr_en = EN_SPKR_GPIO_NONE, }; static struct acp_card_drvdata sof_rt5682s_max_data = { @@ -47,7 +47,7 @@ static struct acp_card_drvdata sof_rt5682s_max_data = { .hs_codec_id = RT5682S, .amp_codec_id = MAX98360A, .dmic_codec_id = DMIC, - .gpio_spkr_en = EN_SPKR_GPIO_NK, + .gpio_spkr_en = EN_SPKR_GPIO_NONE, }; static const struct snd_kcontrol_new acp_controls[] = { From bdc120a2bcd834e571ce4115aaddf71ab34495de Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Tue, 1 Feb 2022 19:06:26 +0100 Subject: [PATCH 047/493] net: ieee802154: ca8210: Fix lifs/sifs periods These periods are expressed in time units (microseconds) while 40 and 12 are the number of symbol durations these periods will last. We need to multiply them both with the symbol_duration in order to get these values in microseconds. Fixes: ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver") Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/r/20220201180629.93410-2-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt --- drivers/net/ieee802154/ca8210.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ieee802154/ca8210.c b/drivers/net/ieee802154/ca8210.c index f3438d3e104acb..2bc730fd260ebb 100644 --- a/drivers/net/ieee802154/ca8210.c +++ b/drivers/net/ieee802154/ca8210.c @@ -2975,8 +2975,8 @@ static void ca8210_hw_setup(struct ieee802154_hw *ca8210_hw) ca8210_hw->phy->cca.opt = NL802154_CCA_OPT_ENERGY_CARRIER_AND; ca8210_hw->phy->cca_ed_level = -9800; ca8210_hw->phy->symbol_duration = 16; - ca8210_hw->phy->lifs_period = 40; - ca8210_hw->phy->sifs_period = 12; + ca8210_hw->phy->lifs_period = 40 * ca8210_hw->phy->symbol_duration; + ca8210_hw->phy->sifs_period = 12 * ca8210_hw->phy->symbol_duration; ca8210_hw->flags = IEEE802154_HW_AFILT | IEEE802154_HW_OMIT_CKSUM | From be8287c9b8326d767429c8371bbc78b33f6efe13 Mon Sep 17 00:00:00 2001 From: Miri Korenblit Date: Fri, 28 Jan 2022 14:30:50 +0200 Subject: [PATCH 048/493] iwlwifi: mvm: fix condition which checks the version of rate_n_flags We're checking the FW version of TX_CMD in order to decide whether to convert rate_n_flags from the old format to the new one. If the API is smaller or equal to 6 we should convert it. Currently we're converting if the API version is greater than 6. Fix it. Signed-off-by: Miri Korenblit Fixes: dc52fac37c87 ("iwlwifi: mvm: Support new TX_RSP and COMPRESSED_BA_RES versions") Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/iwlwifi.20220128142706.a264ac51d106.I228ba1317cdcbfef931c09d280d701fcad9048d2@changeid --- drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c index 6fa2c12f7955a8..9213f8518f10de 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c @@ -1427,7 +1427,7 @@ static void iwl_mvm_hwrate_to_tx_status(const struct iwl_fw *fw, struct ieee80211_tx_rate *r = &info->status.rates[0]; if (iwl_fw_lookup_notif_ver(fw, LONG_GROUP, - TX_CMD, 0) > 6) + TX_CMD, 0) <= 6) rate_n_flags = iwl_new_rate_from_v1(rate_n_flags); info->status.antenna = From 973f02c932b0be41a26bb9bdf38b7b92721611d2 Mon Sep 17 00:00:00 2001 From: Miri Korenblit Date: Fri, 28 Jan 2022 14:30:51 +0200 Subject: [PATCH 049/493] iwlwifi: fix iwl_legacy_rate_to_fw_idx There are a couple of bugs in this function: 1. It is declared as a non-static function, even though it's only used in one file. 2. Its return value should be of type u32 but it returns (in some cases) -1. Fix them by making this function static and returning an error value of type unsigned. In addition, we're assigning the return value of this function as the legacy rate even if the function returned an error value. Fix this by assigning the lowest rate in this case. Signed-off-by: Miri Korenblit Reported-by: Ye Guojin Reported-by: Zeal Robot Fixes: 9998f81e4ba5 ("iwlwifi: mvm: convert old rate & flags to the new format.") Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/iwlwifi.20220128142706.5612eeb9d6d0.I992e10d93fc22919b2bc42daad087ee1b5d6f014@changeid --- .../net/wireless/intel/iwlwifi/fw/api/rs.h | 1 - drivers/net/wireless/intel/iwlwifi/fw/rs.c | 33 ++++++++++--------- 2 files changed, 18 insertions(+), 16 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/rs.h b/drivers/net/wireless/intel/iwlwifi/fw/api/rs.h index 173a6991587b22..4a7723eb8c1ded 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/api/rs.h +++ b/drivers/net/wireless/intel/iwlwifi/fw/api/rs.h @@ -752,7 +752,6 @@ struct iwl_lq_cmd { u8 iwl_fw_rate_idx_to_plcp(int idx); u32 iwl_new_rate_from_v1(u32 rate_v1); -u32 iwl_legacy_rate_to_fw_idx(u32 rate_n_flags); const struct iwl_rate_mcs_info *iwl_rate_mcs(int idx); const char *iwl_rs_pretty_ant(u8 ant); const char *iwl_rs_pretty_bw(int bw); diff --git a/drivers/net/wireless/intel/iwlwifi/fw/rs.c b/drivers/net/wireless/intel/iwlwifi/fw/rs.c index a21c3befd93b5b..a835214611ce51 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/rs.c +++ b/drivers/net/wireless/intel/iwlwifi/fw/rs.c @@ -91,6 +91,20 @@ const char *iwl_rs_pretty_bw(int bw) } IWL_EXPORT_SYMBOL(iwl_rs_pretty_bw); +static u32 iwl_legacy_rate_to_fw_idx(u32 rate_n_flags) +{ + int rate = rate_n_flags & RATE_LEGACY_RATE_MSK_V1; + int idx; + bool ofdm = !(rate_n_flags & RATE_MCS_CCK_MSK_V1); + int offset = ofdm ? IWL_FIRST_OFDM_RATE : 0; + int last = ofdm ? IWL_RATE_COUNT_LEGACY : IWL_FIRST_OFDM_RATE; + + for (idx = offset; idx < last; idx++) + if (iwl_fw_rate_idx_to_plcp(idx) == rate) + return idx - offset; + return IWL_RATE_INVALID; +} + u32 iwl_new_rate_from_v1(u32 rate_v1) { u32 rate_v2 = 0; @@ -144,7 +158,10 @@ u32 iwl_new_rate_from_v1(u32 rate_v1) } else { u32 legacy_rate = iwl_legacy_rate_to_fw_idx(rate_v1); - WARN_ON(legacy_rate < 0); + if (WARN_ON_ONCE(legacy_rate == IWL_RATE_INVALID)) + legacy_rate = (rate_v1 & RATE_MCS_CCK_MSK_V1) ? + IWL_FIRST_CCK_RATE : IWL_FIRST_OFDM_RATE; + rate_v2 |= legacy_rate; if (!(rate_v1 & RATE_MCS_CCK_MSK_V1)) rate_v2 |= RATE_MCS_LEGACY_OFDM_MSK; @@ -172,20 +189,6 @@ u32 iwl_new_rate_from_v1(u32 rate_v1) } IWL_EXPORT_SYMBOL(iwl_new_rate_from_v1); -u32 iwl_legacy_rate_to_fw_idx(u32 rate_n_flags) -{ - int rate = rate_n_flags & RATE_LEGACY_RATE_MSK_V1; - int idx; - bool ofdm = !(rate_n_flags & RATE_MCS_CCK_MSK_V1); - int offset = ofdm ? IWL_FIRST_OFDM_RATE : 0; - int last = ofdm ? IWL_RATE_COUNT_LEGACY : IWL_FIRST_OFDM_RATE; - - for (idx = offset; idx < last; idx++) - if (iwl_fw_rate_idx_to_plcp(idx) == rate) - return idx - offset; - return -1; -} - int rs_pretty_print_rate(char *buf, int bufsz, const u32 rate) { char *type; From e9848aed147708a06193b40d78493b0ef6abccf2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 28 Jan 2022 14:30:52 +0200 Subject: [PATCH 050/493] iwlwifi: pcie: fix locking when "HW not ready" If we run into this error path, we shouldn't unlock the mutex since it's not locked since. Fix this. Fixes: a6bd005fe92d ("iwlwifi: pcie: fix RF-Kill vs. firmware load race") Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/iwlwifi.20220128142706.5d16821d1433.Id259699ddf9806459856d6aefbdbe54477aecffd@changeid --- drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c index a63386a0123280..ef14584fc0a178 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c @@ -1329,8 +1329,7 @@ static int iwl_trans_pcie_start_fw(struct iwl_trans *trans, /* This may fail if AMT took ownership of the device */ if (iwl_pcie_prepare_card_hw(trans)) { IWL_WARN(trans, "Exit HW not ready\n"); - ret = -EIO; - goto out; + return -EIO; } iwl_enable_rfkill_int(trans); From 4c29c1e27a1e178a219b3877d055e6dd643bdfda Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 28 Jan 2022 14:30:53 +0200 Subject: [PATCH 051/493] iwlwifi: pcie: gen2: fix locking when "HW not ready" If we run into this error path, we shouldn't unlock the mutex since it's not locked since. Fix this in the gen2 code as well. Fixes: eda50cde58de ("iwlwifi: pcie: add context information support") Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/iwlwifi.20220128142706.b8b0dfce16ef.Ie20f0f7b23e5911350a2766524300d2915e7b677@changeid --- drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c index 0febdcacbd429a..94f40c4d242171 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c @@ -385,8 +385,7 @@ int iwl_trans_pcie_gen2_start_fw(struct iwl_trans *trans, /* This may fail if AMT took ownership of the device */ if (iwl_pcie_prepare_card_hw(trans)) { IWL_WARN(trans, "Exit HW not ready\n"); - ret = -EIO; - goto out; + return -EIO; } iwl_enable_rfkill_int(trans); From e1849784de9b75519f972abd22fb7e9e7bd7f992 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Fri, 28 Jan 2022 14:30:54 +0200 Subject: [PATCH 052/493] iwlwifi: mei: fix the pskb_may_pull check in ipv4 The check makes sure that we can look at the ip header. We first need to check that the basic ip header (20 bytes) can be pulled before we look at the field that will teach us how long is the ip header. This is why there are two checks. The second check was wrong and smatch pointed that sizeof(ip_hdrlen(skb) - sizeof(*iphdr)) can't be right. Looking at the code again made me think that we really need ip_hdrlen(skb) since we want to make sure all the IP header is in the buffer header. This will allow us to set the transport offset and from there to look at the transport header (TCP / UDP). Reported-by: Dan Carpenter Signed-off-by: Emmanuel Grumbach Fixes: 2da4366f9e2c ("iwlwifi: mei: add the driver to allow cooperation with CSME") Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/iwlwifi.20220128142706.6d9fcf82691e.I449b1e21c5b5478f2ac218522570479918f49f9d@changeid --- drivers/net/wireless/intel/iwlwifi/mei/net.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mei/net.c b/drivers/net/wireless/intel/iwlwifi/mei/net.c index 5f966af6972000..468102a95e1b98 100644 --- a/drivers/net/wireless/intel/iwlwifi/mei/net.c +++ b/drivers/net/wireless/intel/iwlwifi/mei/net.c @@ -195,8 +195,7 @@ static bool iwl_mei_rx_filter_ipv4(struct sk_buff *skb, bool match; if (!pskb_may_pull(skb, skb_network_offset(skb) + sizeof(*iphdr)) || - !pskb_may_pull(skb, skb_network_offset(skb) + - sizeof(ip_hdrlen(skb) - sizeof(*iphdr)))) + !pskb_may_pull(skb, skb_network_offset(skb) + ip_hdrlen(skb))) return false; iphdrlen = ip_hdrlen(skb); From 44bf7c4667efe10390aa59eda39833a9a0439b5b Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Fri, 28 Jan 2022 14:30:55 +0200 Subject: [PATCH 053/493] iwlwifi: mei: retry mapping the shared area The shared area is a DMA memory allocated in the host and mapped so that the host and the CSME firmware can exchange data. It is mapped through a dedicated PCI device that is driven by the mei bus driver. The bus driver is in charge of allocating and mapping this memory. It also needs to configure the CSME firmware with a specific set of commands, so that the CSME firmware will know that this memory is meant to be used by its internal WLAN module. For this, the CSME firmware first needs to completely initialize its WLAN module and only then get the mapping request. The problem is that the mei bus enumeration completes before the WLAN is completely ready. This means that the WLAN module's initialization is racing with iwlmei's allocation and mapping flow. Testing showed a problem in resume flows where iwlmei was too fast and the DMA mapping failed. Add a retry mechanism to make sure that we will succeed to map the memory. Fixes: 2da4366f9e2c ("iwlwifi: mei: add the driver to allow cooperation with CSME") Fixes: bcbddc4f9d02 ("iwlwifi: mei: wait before mapping the shared area") Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/iwlwifi.20220128142706.cc51e6a6d635.I4b74a082eb8d89f9e4f556a27c4339c15444dc6c@changeid --- drivers/net/wireless/intel/iwlwifi/mei/main.c | 35 ++++++++++++++----- 1 file changed, 26 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mei/main.c b/drivers/net/wireless/intel/iwlwifi/mei/main.c index d9733aaf6f6e94..6cc5553027a011 100644 --- a/drivers/net/wireless/intel/iwlwifi/mei/main.c +++ b/drivers/net/wireless/intel/iwlwifi/mei/main.c @@ -229,8 +229,6 @@ static int iwl_mei_alloc_shared_mem(struct mei_cl_device *cldev) if (IS_ERR(mem->ctrl)) { int ret = PTR_ERR(mem->ctrl); - dev_err(&cldev->dev, "Couldn't allocate the shared memory: %d\n", - ret); mem->ctrl = NULL; return ret; @@ -1784,6 +1782,8 @@ static void iwl_mei_dbgfs_unregister(struct iwl_mei *mei) {} #endif /* CONFIG_DEBUG_FS */ +#define ALLOC_SHARED_MEM_RETRY_MAX_NUM 3 + /* * iwl_mei_probe - the probe function called by the mei bus enumeration * @@ -1795,6 +1795,7 @@ static void iwl_mei_dbgfs_unregister(struct iwl_mei *mei) {} static int iwl_mei_probe(struct mei_cl_device *cldev, const struct mei_cl_device_id *id) { + int alloc_retry = ALLOC_SHARED_MEM_RETRY_MAX_NUM; struct iwl_mei *mei; int ret; @@ -1812,15 +1813,31 @@ static int iwl_mei_probe(struct mei_cl_device *cldev, mei_cldev_set_drvdata(cldev, mei); mei->cldev = cldev; - /* - * The CSME firmware needs to boot the internal WLAN client. Wait here - * so that the DMA map request will succeed. - */ - msleep(20); + do { + ret = iwl_mei_alloc_shared_mem(cldev); + if (!ret) + break; + /* + * The CSME firmware needs to boot the internal WLAN client. + * This can take time in certain configurations (usually + * upon resume and when the whole CSME firmware is shut down + * during suspend). + * + * Wait a bit before retrying and hope we'll succeed next time. + */ - ret = iwl_mei_alloc_shared_mem(cldev); - if (ret) + dev_dbg(&cldev->dev, + "Couldn't allocate the shared memory: %d, attempt %d / %d\n", + ret, alloc_retry, ALLOC_SHARED_MEM_RETRY_MAX_NUM); + msleep(100); + alloc_retry--; + } while (alloc_retry); + + if (ret) { + dev_err(&cldev->dev, "Couldn't allocate the shared memory: %d\n", + ret); goto free; + } iwl_mei_init_shared_mem(mei); From 7cf800f46e07e6b75a43036c4389d6ca717fd017 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Fri, 28 Jan 2022 14:30:56 +0200 Subject: [PATCH 054/493] iwlwifi: mvm: don't feed the hardware RFKILL into iwlmei iwlmei can trigger a hardware RFKILL when the CSME firmware does not want the host to touch the device. But then, iwlmvm reports RFKILL which makes cfg80211 update iwlmvm about RFKILL. iwlmvm then thinks there is a change in the _software_ rfkill and it calls rfkill_blocked() to fetch the RFKILL state. This returns that RFKILL is blocked (because of iwlmei) and iwlmvm tells iwlmei that _software_ RFKILL is asserted. This is a bug of course. Fix this by checking explicitly the software RFKILL state and not the overall RFKILL state. Fixes: 7ce1f2157e14 ("iwlwifi: mvm: read the rfkill state and feed it to iwlmei") Signed-off-by: Emmanuel Grumbach Fixes: 7ce1f2157e14 ("iwlwifi: mvm: read the rfkill state and feed it to iwlmei") Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/iwlwifi.20220128142706.f293861a3f92.I9553d27df1de6fd5756a43ea5f8b89d06fa1a6f2@changeid --- drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h index 1dcbb0eb63c378..b1fe8434ab0d54 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h @@ -2225,7 +2225,7 @@ static inline void iwl_mvm_mei_device_down(struct iwl_mvm *mvm) static inline void iwl_mvm_mei_set_sw_rfkill_state(struct iwl_mvm *mvm) { bool sw_rfkill = - mvm->hw_registered ? rfkill_blocked(mvm->hw->wiphy->rfkill) : false; + mvm->hw_registered ? rfkill_soft_blocked(mvm->hw->wiphy->rfkill) : false; if (mvm->mei_registered) iwl_mei_set_rfkill_state(iwl_mvm_is_radio_killed(mvm), From 30de48b436a08a8df651011e2d3614e26a2c592a Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Fri, 28 Jan 2022 14:30:57 +0200 Subject: [PATCH 055/493] iwlwifi: mei: report RFKILL upon register when needed When we register and we are in link protection passive, meaning that the host can't touch the device, report RFKILL immediately upon register() and don't wait for the CSME firmware to let us know again about the link protection state. What happens if we wait is that the host will not see RFKILL soon enough and we'll have a window of time during which it can bring up the device which will request ownership. Fixes: 2da4366f9e2c ("iwlwifi: mei: add the driver to allow cooperation with CSME") Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/iwlwifi.20220128142706.a136f9f46336.Ief7506dc3b1813a1943a5a639aa45d8e5f284f31@changeid --- drivers/net/wireless/intel/iwlwifi/mei/main.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mei/main.c b/drivers/net/wireless/intel/iwlwifi/mei/main.c index 6cc5553027a011..2f7f0f994ca328 100644 --- a/drivers/net/wireless/intel/iwlwifi/mei/main.c +++ b/drivers/net/wireless/intel/iwlwifi/mei/main.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2021 Intel Corporation + * Copyright (C) 2021-2022 Intel Corporation */ #include @@ -146,6 +146,7 @@ struct iwl_mei_filters { * @csme_taking_ownership: true when CSME is taking ownership. Used to remember * to send CSME_OWNERSHIP_CONFIRMED when the driver completes its down * flow. + * @link_prot_state: true when we are in link protection PASSIVE * @csa_throttle_end_wk: used when &csa_throttled is true * @data_q_lock: protects the access to the data queues which are * accessed without the mutex. @@ -165,6 +166,7 @@ struct iwl_mei { bool amt_enabled; bool csa_throttled; bool csme_taking_ownership; + bool link_prot_state; struct delayed_work csa_throttle_end_wk; spinlock_t data_q_lock; @@ -667,6 +669,8 @@ iwl_mei_handle_conn_status(struct mei_cl_device *cldev, iwl_mei_cache.ops->me_conn_status(iwl_mei_cache.priv, &conn_info); + mei->link_prot_state = status->link_prot_state; + /* * Update the Rfkill state in case the host does not own the device: * if we are in Link Protection, ask to not touch the device, else, @@ -1661,9 +1665,11 @@ int iwl_mei_register(void *priv, const struct iwl_mei_ops *ops) mei_cldev_get_drvdata(iwl_mei_global_cldev); /* we have already a SAP connection */ - if (iwl_mei_is_connected()) + if (iwl_mei_is_connected()) { iwl_mei_send_sap_msg(mei->cldev, SAP_MSG_NOTIF_WIFIDR_UP); + ops->rfkill(priv, mei->link_prot_state); + } } ret = 0; From 92883a524ae918736a7b8acef98698075507b8c1 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Fri, 28 Jan 2022 14:48:50 +0200 Subject: [PATCH 056/493] iwlwifi: remove deprecated broadcast filtering feature This feature has been deprecated and should not be used anymore. With newer firmwares, namely *-67.ucode and above, trying to use it causes an assertion failure in the FW, similar to this: [Tue Jan 11 20:05:24 2022] iwlwifi 0000:04:00.0: 0x00001062 | ADVANCED_SYSASSERT In order to prevent this feature from being used, remove it entirely and get rid of the Kconfig option that enables it (IWLWIFI_BCAST_FILTERING). Fixes: cbaa6aeedee5 ("iwlwifi: bump FW API to 67 for AX devices") Link: https://bugzilla.kernel.org/show_bug.cgi?id=215488 Cc: stable@vger.kernel.org # 5.16.x Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/iwlwifi.20220128144623.9241e049f13e.Ia4f282813ca2ddd24c13427823519113f2bbebf2@changeid --- drivers/net/wireless/intel/iwlwifi/Kconfig | 13 - .../wireless/intel/iwlwifi/fw/api/commands.h | 5 - .../wireless/intel/iwlwifi/fw/api/filter.h | 88 ------- drivers/net/wireless/intel/iwlwifi/fw/file.h | 2 - .../net/wireless/intel/iwlwifi/mvm/debugfs.c | 203 --------------- .../net/wireless/intel/iwlwifi/mvm/mac80211.c | 240 ------------------ drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 13 - drivers/net/wireless/intel/iwlwifi/mvm/ops.c | 1 - 8 files changed, 565 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/Kconfig b/drivers/net/wireless/intel/iwlwifi/Kconfig index c21c0c68849a28..85e70428375562 100644 --- a/drivers/net/wireless/intel/iwlwifi/Kconfig +++ b/drivers/net/wireless/intel/iwlwifi/Kconfig @@ -80,19 +80,6 @@ config IWLWIFI_OPMODE_MODULAR comment "WARNING: iwlwifi is useless without IWLDVM or IWLMVM" depends on IWLDVM=n && IWLMVM=n -config IWLWIFI_BCAST_FILTERING - bool "Enable broadcast filtering" - depends on IWLMVM - help - Say Y here to enable default bcast filtering configuration. - - Enabling broadcast filtering will drop any incoming wireless - broadcast frames, except some very specific predefined - patterns (e.g. incoming arp requests). - - If unsure, don't enable this option, as some programs might - expect incoming broadcasts for their normal operations. - menu "Debugging Options" config IWLWIFI_DEBUG diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/commands.h b/drivers/net/wireless/intel/iwlwifi/fw/api/commands.h index 0703e41403a675..35b8856e511f0a 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/api/commands.h +++ b/drivers/net/wireless/intel/iwlwifi/fw/api/commands.h @@ -501,11 +501,6 @@ enum iwl_legacy_cmds { */ DEBUG_LOG_MSG = 0xf7, - /** - * @BCAST_FILTER_CMD: &struct iwl_bcast_filter_cmd - */ - BCAST_FILTER_CMD = 0xcf, - /** * @MCAST_FILTER_CMD: &struct iwl_mcast_filter_cmd */ diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/filter.h b/drivers/net/wireless/intel/iwlwifi/fw/api/filter.h index dd62a63956b3be..e44c70b7c79072 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/api/filter.h +++ b/drivers/net/wireless/intel/iwlwifi/fw/api/filter.h @@ -36,92 +36,4 @@ struct iwl_mcast_filter_cmd { u8 addr_list[0]; } __packed; /* MCAST_FILTERING_CMD_API_S_VER_1 */ -#define MAX_BCAST_FILTERS 8 -#define MAX_BCAST_FILTER_ATTRS 2 - -/** - * enum iwl_mvm_bcast_filter_attr_offset - written by fw for each Rx packet - * @BCAST_FILTER_OFFSET_PAYLOAD_START: offset is from payload start. - * @BCAST_FILTER_OFFSET_IP_END: offset is from ip header end (i.e. - * start of ip payload). - */ -enum iwl_mvm_bcast_filter_attr_offset { - BCAST_FILTER_OFFSET_PAYLOAD_START = 0, - BCAST_FILTER_OFFSET_IP_END = 1, -}; - -/** - * struct iwl_fw_bcast_filter_attr - broadcast filter attribute - * @offset_type: &enum iwl_mvm_bcast_filter_attr_offset. - * @offset: starting offset of this pattern. - * @reserved1: reserved - * @val: value to match - big endian (MSB is the first - * byte to match from offset pos). - * @mask: mask to match (big endian). - */ -struct iwl_fw_bcast_filter_attr { - u8 offset_type; - u8 offset; - __le16 reserved1; - __be32 val; - __be32 mask; -} __packed; /* BCAST_FILTER_ATT_S_VER_1 */ - -/** - * enum iwl_mvm_bcast_filter_frame_type - filter frame type - * @BCAST_FILTER_FRAME_TYPE_ALL: consider all frames. - * @BCAST_FILTER_FRAME_TYPE_IPV4: consider only ipv4 frames - */ -enum iwl_mvm_bcast_filter_frame_type { - BCAST_FILTER_FRAME_TYPE_ALL = 0, - BCAST_FILTER_FRAME_TYPE_IPV4 = 1, -}; - -/** - * struct iwl_fw_bcast_filter - broadcast filter - * @discard: discard frame (1) or let it pass (0). - * @frame_type: &enum iwl_mvm_bcast_filter_frame_type. - * @reserved1: reserved - * @num_attrs: number of valid attributes in this filter. - * @attrs: attributes of this filter. a filter is considered matched - * only when all its attributes are matched (i.e. AND relationship) - */ -struct iwl_fw_bcast_filter { - u8 discard; - u8 frame_type; - u8 num_attrs; - u8 reserved1; - struct iwl_fw_bcast_filter_attr attrs[MAX_BCAST_FILTER_ATTRS]; -} __packed; /* BCAST_FILTER_S_VER_1 */ - -/** - * struct iwl_fw_bcast_mac - per-mac broadcast filtering configuration. - * @default_discard: default action for this mac (discard (1) / pass (0)). - * @reserved1: reserved - * @attached_filters: bitmap of relevant filters for this mac. - */ -struct iwl_fw_bcast_mac { - u8 default_discard; - u8 reserved1; - __le16 attached_filters; -} __packed; /* BCAST_MAC_CONTEXT_S_VER_1 */ - -/** - * struct iwl_bcast_filter_cmd - broadcast filtering configuration - * @disable: enable (0) / disable (1) - * @max_bcast_filters: max number of filters (MAX_BCAST_FILTERS) - * @max_macs: max number of macs (NUM_MAC_INDEX_DRIVER) - * @reserved1: reserved - * @filters: broadcast filters - * @macs: broadcast filtering configuration per-mac - */ -struct iwl_bcast_filter_cmd { - u8 disable; - u8 max_bcast_filters; - u8 max_macs; - u8 reserved1; - struct iwl_fw_bcast_filter filters[MAX_BCAST_FILTERS]; - struct iwl_fw_bcast_mac macs[NUM_MAC_INDEX_DRIVER]; -} __packed; /* BCAST_FILTERING_HCMD_API_S_VER_1 */ - #endif /* __iwl_fw_api_filter_h__ */ diff --git a/drivers/net/wireless/intel/iwlwifi/fw/file.h b/drivers/net/wireless/intel/iwlwifi/fw/file.h index e4ebda64cd52d0..efc6540d31af63 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/file.h +++ b/drivers/net/wireless/intel/iwlwifi/fw/file.h @@ -181,7 +181,6 @@ struct iwl_ucode_capa { * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version) * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD * @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save - * @IWL_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering. * @IWL_UCODE_TLV_FLAGS_EBS_SUPPORT: this uCode image supports EBS. */ enum iwl_ucode_tlv_flag { @@ -196,7 +195,6 @@ enum iwl_ucode_tlv_flag { IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT = BIT(24), IWL_UCODE_TLV_FLAGS_EBS_SUPPORT = BIT(25), IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD = BIT(26), - IWL_UCODE_TLV_FLAGS_BCAST_FILTERING = BIT(29), }; typedef unsigned int __bitwise iwl_ucode_tlv_api_t; diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c index fb4920b01dbb50..63432c24eb592a 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c @@ -1369,189 +1369,6 @@ static ssize_t iwl_dbgfs_dbg_time_point_write(struct iwl_mvm *mvm, return count; } -#define ADD_TEXT(...) pos += scnprintf(buf + pos, bufsz - pos, __VA_ARGS__) -#ifdef CONFIG_IWLWIFI_BCAST_FILTERING -static ssize_t iwl_dbgfs_bcast_filters_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_mvm *mvm = file->private_data; - struct iwl_bcast_filter_cmd cmd; - const struct iwl_fw_bcast_filter *filter; - char *buf; - int bufsz = 1024; - int i, j, pos = 0; - ssize_t ret; - - buf = kzalloc(bufsz, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - mutex_lock(&mvm->mutex); - if (!iwl_mvm_bcast_filter_build_cmd(mvm, &cmd)) { - ADD_TEXT("None\n"); - mutex_unlock(&mvm->mutex); - goto out; - } - mutex_unlock(&mvm->mutex); - - for (i = 0; cmd.filters[i].attrs[0].mask; i++) { - filter = &cmd.filters[i]; - - ADD_TEXT("Filter [%d]:\n", i); - ADD_TEXT("\tDiscard=%d\n", filter->discard); - ADD_TEXT("\tFrame Type: %s\n", - filter->frame_type ? "IPv4" : "Generic"); - - for (j = 0; j < ARRAY_SIZE(filter->attrs); j++) { - const struct iwl_fw_bcast_filter_attr *attr; - - attr = &filter->attrs[j]; - if (!attr->mask) - break; - - ADD_TEXT("\tAttr [%d]: offset=%d (from %s), mask=0x%x, value=0x%x reserved=0x%x\n", - j, attr->offset, - attr->offset_type ? "IP End" : - "Payload Start", - be32_to_cpu(attr->mask), - be32_to_cpu(attr->val), - le16_to_cpu(attr->reserved1)); - } - } -out: - ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); - kfree(buf); - return ret; -} - -static ssize_t iwl_dbgfs_bcast_filters_write(struct iwl_mvm *mvm, char *buf, - size_t count, loff_t *ppos) -{ - int pos, next_pos; - struct iwl_fw_bcast_filter filter = {}; - struct iwl_bcast_filter_cmd cmd; - u32 filter_id, attr_id, mask, value; - int err = 0; - - if (sscanf(buf, "%d %hhi %hhi %n", &filter_id, &filter.discard, - &filter.frame_type, &pos) != 3) - return -EINVAL; - - if (filter_id >= ARRAY_SIZE(mvm->dbgfs_bcast_filtering.cmd.filters) || - filter.frame_type > BCAST_FILTER_FRAME_TYPE_IPV4) - return -EINVAL; - - for (attr_id = 0; attr_id < ARRAY_SIZE(filter.attrs); - attr_id++) { - struct iwl_fw_bcast_filter_attr *attr = - &filter.attrs[attr_id]; - - if (pos >= count) - break; - - if (sscanf(&buf[pos], "%hhi %hhi %i %i %n", - &attr->offset, &attr->offset_type, - &mask, &value, &next_pos) != 4) - return -EINVAL; - - attr->mask = cpu_to_be32(mask); - attr->val = cpu_to_be32(value); - if (mask) - filter.num_attrs++; - - pos += next_pos; - } - - mutex_lock(&mvm->mutex); - memcpy(&mvm->dbgfs_bcast_filtering.cmd.filters[filter_id], - &filter, sizeof(filter)); - - /* send updated bcast filtering configuration */ - if (iwl_mvm_firmware_running(mvm) && - mvm->dbgfs_bcast_filtering.override && - iwl_mvm_bcast_filter_build_cmd(mvm, &cmd)) - err = iwl_mvm_send_cmd_pdu(mvm, BCAST_FILTER_CMD, 0, - sizeof(cmd), &cmd); - mutex_unlock(&mvm->mutex); - - return err ?: count; -} - -static ssize_t iwl_dbgfs_bcast_filters_macs_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_mvm *mvm = file->private_data; - struct iwl_bcast_filter_cmd cmd; - char *buf; - int bufsz = 1024; - int i, pos = 0; - ssize_t ret; - - buf = kzalloc(bufsz, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - mutex_lock(&mvm->mutex); - if (!iwl_mvm_bcast_filter_build_cmd(mvm, &cmd)) { - ADD_TEXT("None\n"); - mutex_unlock(&mvm->mutex); - goto out; - } - mutex_unlock(&mvm->mutex); - - for (i = 0; i < ARRAY_SIZE(cmd.macs); i++) { - const struct iwl_fw_bcast_mac *mac = &cmd.macs[i]; - - ADD_TEXT("Mac [%d]: discard=%d attached_filters=0x%x\n", - i, mac->default_discard, mac->attached_filters); - } -out: - ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); - kfree(buf); - return ret; -} - -static ssize_t iwl_dbgfs_bcast_filters_macs_write(struct iwl_mvm *mvm, - char *buf, size_t count, - loff_t *ppos) -{ - struct iwl_bcast_filter_cmd cmd; - struct iwl_fw_bcast_mac mac = {}; - u32 mac_id, attached_filters; - int err = 0; - - if (!mvm->bcast_filters) - return -ENOENT; - - if (sscanf(buf, "%d %hhi %i", &mac_id, &mac.default_discard, - &attached_filters) != 3) - return -EINVAL; - - if (mac_id >= ARRAY_SIZE(cmd.macs) || - mac.default_discard > 1 || - attached_filters >= BIT(ARRAY_SIZE(cmd.filters))) - return -EINVAL; - - mac.attached_filters = cpu_to_le16(attached_filters); - - mutex_lock(&mvm->mutex); - memcpy(&mvm->dbgfs_bcast_filtering.cmd.macs[mac_id], - &mac, sizeof(mac)); - - /* send updated bcast filtering configuration */ - if (iwl_mvm_firmware_running(mvm) && - mvm->dbgfs_bcast_filtering.override && - iwl_mvm_bcast_filter_build_cmd(mvm, &cmd)) - err = iwl_mvm_send_cmd_pdu(mvm, BCAST_FILTER_CMD, 0, - sizeof(cmd), &cmd); - mutex_unlock(&mvm->mutex); - - return err ?: count; -} -#endif - #define MVM_DEBUGFS_WRITE_FILE_OPS(name, bufsz) \ _MVM_DEBUGFS_WRITE_FILE_OPS(name, bufsz, struct iwl_mvm) #define MVM_DEBUGFS_READ_WRITE_FILE_OPS(name, bufsz) \ @@ -1881,11 +1698,6 @@ MVM_DEBUGFS_WRITE_FILE_OPS(inject_beacon_ie_restore, 512); MVM_DEBUGFS_READ_FILE_OPS(uapsd_noagg_bssids); -#ifdef CONFIG_IWLWIFI_BCAST_FILTERING -MVM_DEBUGFS_READ_WRITE_FILE_OPS(bcast_filters, 256); -MVM_DEBUGFS_READ_WRITE_FILE_OPS(bcast_filters_macs, 256); -#endif - #ifdef CONFIG_ACPI MVM_DEBUGFS_READ_FILE_OPS(sar_geo_profile); #endif @@ -2097,21 +1909,6 @@ void iwl_mvm_dbgfs_register(struct iwl_mvm *mvm) MVM_DEBUGFS_ADD_FILE(uapsd_noagg_bssids, mvm->debugfs_dir, S_IRUSR); -#ifdef CONFIG_IWLWIFI_BCAST_FILTERING - if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_BCAST_FILTERING) { - bcast_dir = debugfs_create_dir("bcast_filtering", - mvm->debugfs_dir); - - debugfs_create_bool("override", 0600, bcast_dir, - &mvm->dbgfs_bcast_filtering.override); - - MVM_DEBUGFS_ADD_FILE_ALIAS("filters", bcast_filters, - bcast_dir, 0600); - MVM_DEBUGFS_ADD_FILE_ALIAS("macs", bcast_filters_macs, - bcast_dir, 0600); - } -#endif - #ifdef CONFIG_PM_SLEEP MVM_DEBUGFS_ADD_FILE(d3_test, mvm->debugfs_dir, 0400); debugfs_create_bool("d3_wake_sysassert", 0600, mvm->debugfs_dir, diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index 65f4fe3ef50441..4ac599f6ad22a6 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -55,79 +55,6 @@ static const struct ieee80211_iface_combination iwl_mvm_iface_combinations[] = { }, }; -#ifdef CONFIG_IWLWIFI_BCAST_FILTERING -/* - * Use the reserved field to indicate magic values. - * these values will only be used internally by the driver, - * and won't make it to the fw (reserved will be 0). - * BC_FILTER_MAGIC_IP - configure the val of this attribute to - * be the vif's ip address. in case there is not a single - * ip address (0, or more than 1), this attribute will - * be skipped. - * BC_FILTER_MAGIC_MAC - set the val of this attribute to - * the LSB bytes of the vif's mac address - */ -enum { - BC_FILTER_MAGIC_NONE = 0, - BC_FILTER_MAGIC_IP, - BC_FILTER_MAGIC_MAC, -}; - -static const struct iwl_fw_bcast_filter iwl_mvm_default_bcast_filters[] = { - { - /* arp */ - .discard = 0, - .frame_type = BCAST_FILTER_FRAME_TYPE_ALL, - .attrs = { - { - /* frame type - arp, hw type - ethernet */ - .offset_type = - BCAST_FILTER_OFFSET_PAYLOAD_START, - .offset = sizeof(rfc1042_header), - .val = cpu_to_be32(0x08060001), - .mask = cpu_to_be32(0xffffffff), - }, - { - /* arp dest ip */ - .offset_type = - BCAST_FILTER_OFFSET_PAYLOAD_START, - .offset = sizeof(rfc1042_header) + 2 + - sizeof(struct arphdr) + - ETH_ALEN + sizeof(__be32) + - ETH_ALEN, - .mask = cpu_to_be32(0xffffffff), - /* mark it as special field */ - .reserved1 = cpu_to_le16(BC_FILTER_MAGIC_IP), - }, - }, - }, - { - /* dhcp offer bcast */ - .discard = 0, - .frame_type = BCAST_FILTER_FRAME_TYPE_IPV4, - .attrs = { - { - /* udp dest port - 68 (bootp client)*/ - .offset_type = BCAST_FILTER_OFFSET_IP_END, - .offset = offsetof(struct udphdr, dest), - .val = cpu_to_be32(0x00440000), - .mask = cpu_to_be32(0xffff0000), - }, - { - /* dhcp - lsb bytes of client hw address */ - .offset_type = BCAST_FILTER_OFFSET_IP_END, - .offset = 38, - .mask = cpu_to_be32(0xffffffff), - /* mark it as special field */ - .reserved1 = cpu_to_le16(BC_FILTER_MAGIC_MAC), - }, - }, - }, - /* last filter must be empty */ - {}, -}; -#endif - static const struct cfg80211_pmsr_capabilities iwl_mvm_pmsr_capa = { .max_peers = IWL_MVM_TOF_MAX_APS, .report_ap_tsf = 1, @@ -693,11 +620,6 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) } #endif -#ifdef CONFIG_IWLWIFI_BCAST_FILTERING - /* assign default bcast filtering configuration */ - mvm->bcast_filters = iwl_mvm_default_bcast_filters; -#endif - ret = iwl_mvm_leds_init(mvm); if (ret) return ret; @@ -1853,162 +1775,6 @@ static void iwl_mvm_config_iface_filter(struct ieee80211_hw *hw, mutex_unlock(&mvm->mutex); } -#ifdef CONFIG_IWLWIFI_BCAST_FILTERING -struct iwl_bcast_iter_data { - struct iwl_mvm *mvm; - struct iwl_bcast_filter_cmd *cmd; - u8 current_filter; -}; - -static void -iwl_mvm_set_bcast_filter(struct ieee80211_vif *vif, - const struct iwl_fw_bcast_filter *in_filter, - struct iwl_fw_bcast_filter *out_filter) -{ - struct iwl_fw_bcast_filter_attr *attr; - int i; - - memcpy(out_filter, in_filter, sizeof(*out_filter)); - - for (i = 0; i < ARRAY_SIZE(out_filter->attrs); i++) { - attr = &out_filter->attrs[i]; - - if (!attr->mask) - break; - - switch (attr->reserved1) { - case cpu_to_le16(BC_FILTER_MAGIC_IP): - if (vif->bss_conf.arp_addr_cnt != 1) { - attr->mask = 0; - continue; - } - - attr->val = vif->bss_conf.arp_addr_list[0]; - break; - case cpu_to_le16(BC_FILTER_MAGIC_MAC): - attr->val = *(__be32 *)&vif->addr[2]; - break; - default: - break; - } - attr->reserved1 = 0; - out_filter->num_attrs++; - } -} - -static void iwl_mvm_bcast_filter_iterator(void *_data, u8 *mac, - struct ieee80211_vif *vif) -{ - struct iwl_bcast_iter_data *data = _data; - struct iwl_mvm *mvm = data->mvm; - struct iwl_bcast_filter_cmd *cmd = data->cmd; - struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); - struct iwl_fw_bcast_mac *bcast_mac; - int i; - - if (WARN_ON(mvmvif->id >= ARRAY_SIZE(cmd->macs))) - return; - - bcast_mac = &cmd->macs[mvmvif->id]; - - /* - * enable filtering only for associated stations, but not for P2P - * Clients - */ - if (vif->type != NL80211_IFTYPE_STATION || vif->p2p || - !vif->bss_conf.assoc) - return; - - bcast_mac->default_discard = 1; - - /* copy all configured filters */ - for (i = 0; mvm->bcast_filters[i].attrs[0].mask; i++) { - /* - * Make sure we don't exceed our filters limit. - * if there is still a valid filter to be configured, - * be on the safe side and just allow bcast for this mac. - */ - if (WARN_ON_ONCE(data->current_filter >= - ARRAY_SIZE(cmd->filters))) { - bcast_mac->default_discard = 0; - bcast_mac->attached_filters = 0; - break; - } - - iwl_mvm_set_bcast_filter(vif, - &mvm->bcast_filters[i], - &cmd->filters[data->current_filter]); - - /* skip current filter if it contains no attributes */ - if (!cmd->filters[data->current_filter].num_attrs) - continue; - - /* attach the filter to current mac */ - bcast_mac->attached_filters |= - cpu_to_le16(BIT(data->current_filter)); - - data->current_filter++; - } -} - -bool iwl_mvm_bcast_filter_build_cmd(struct iwl_mvm *mvm, - struct iwl_bcast_filter_cmd *cmd) -{ - struct iwl_bcast_iter_data iter_data = { - .mvm = mvm, - .cmd = cmd, - }; - - if (IWL_MVM_FW_BCAST_FILTER_PASS_ALL) - return false; - - memset(cmd, 0, sizeof(*cmd)); - cmd->max_bcast_filters = ARRAY_SIZE(cmd->filters); - cmd->max_macs = ARRAY_SIZE(cmd->macs); - -#ifdef CONFIG_IWLWIFI_DEBUGFS - /* use debugfs filters/macs if override is configured */ - if (mvm->dbgfs_bcast_filtering.override) { - memcpy(cmd->filters, &mvm->dbgfs_bcast_filtering.cmd.filters, - sizeof(cmd->filters)); - memcpy(cmd->macs, &mvm->dbgfs_bcast_filtering.cmd.macs, - sizeof(cmd->macs)); - return true; - } -#endif - - /* if no filters are configured, do nothing */ - if (!mvm->bcast_filters) - return false; - - /* configure and attach these filters for each associated sta vif */ - ieee80211_iterate_active_interfaces( - mvm->hw, IEEE80211_IFACE_ITER_NORMAL, - iwl_mvm_bcast_filter_iterator, &iter_data); - - return true; -} - -static int iwl_mvm_configure_bcast_filter(struct iwl_mvm *mvm) -{ - struct iwl_bcast_filter_cmd cmd; - - if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_BCAST_FILTERING)) - return 0; - - if (!iwl_mvm_bcast_filter_build_cmd(mvm, &cmd)) - return 0; - - return iwl_mvm_send_cmd_pdu(mvm, BCAST_FILTER_CMD, 0, - sizeof(cmd), &cmd); -} -#else -static inline int iwl_mvm_configure_bcast_filter(struct iwl_mvm *mvm) -{ - return 0; -} -#endif - static int iwl_mvm_update_mu_groups(struct iwl_mvm *mvm, struct ieee80211_vif *vif) { @@ -2520,7 +2286,6 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm, } iwl_mvm_recalc_multicast(mvm); - iwl_mvm_configure_bcast_filter(mvm); /* reset rssi values */ mvmvif->bf_data.ave_beacon_signal = 0; @@ -2570,11 +2335,6 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm, } } - if (changes & BSS_CHANGED_ARP_FILTER) { - IWL_DEBUG_MAC80211(mvm, "arp filter changed\n"); - iwl_mvm_configure_bcast_filter(mvm); - } - if (changes & BSS_CHANGED_BANDWIDTH) iwl_mvm_apply_fw_smps_request(vif); } diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h index b1fe8434ab0d54..d78f4073059441 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h @@ -884,17 +884,6 @@ struct iwl_mvm { /* rx chain antennas set through debugfs for the scan command */ u8 scan_rx_ant; -#ifdef CONFIG_IWLWIFI_BCAST_FILTERING - /* broadcast filters to configure for each associated station */ - const struct iwl_fw_bcast_filter *bcast_filters; -#ifdef CONFIG_IWLWIFI_DEBUGFS - struct { - bool override; - struct iwl_bcast_filter_cmd cmd; - } dbgfs_bcast_filtering; -#endif -#endif - /* Internal station */ struct iwl_mvm_int_sta aux_sta; struct iwl_mvm_int_sta snif_sta; @@ -1593,8 +1582,6 @@ int iwl_mvm_up(struct iwl_mvm *mvm); int iwl_mvm_load_d3_fw(struct iwl_mvm *mvm); int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm); -bool iwl_mvm_bcast_filter_build_cmd(struct iwl_mvm *mvm, - struct iwl_bcast_filter_cmd *cmd); /* * FW notifications / CMD responses handlers diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c index 87630d38dc5295..1f8b97995b9432 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c @@ -469,7 +469,6 @@ static const struct iwl_hcmd_names iwl_mvm_legacy_names[] = { HCMD_NAME(MCC_CHUB_UPDATE_CMD), HCMD_NAME(MARKER_CMD), HCMD_NAME(BT_PROFILE_NOTIFICATION), - HCMD_NAME(BCAST_FILTER_CMD), HCMD_NAME(MCAST_FILTER_CMD), HCMD_NAME(REPLY_SF_CFG_CMD), HCMD_NAME(REPLY_BEACON_FILTERING_CMD), From 5f06f6bf8d816578c390a2b8a485d40adcca4749 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Fri, 28 Jan 2022 14:48:51 +0200 Subject: [PATCH 057/493] iwlwifi: mvm: don't send SAR GEO command for 3160 devices SAR GEO offsets are not supported on 3160 devices. The code was refactored and caused us to start sending the command anyway, which causes a FW assertion failure. Fix that only considering this feature supported on FW API with major version is 17 if the device is not 3160. Additionally, fix the caller of iwl_mvm_sar_geo_init() so that it checks for the return value, which it was ignoring. Reported-by: Len Brown Signed-off-by: Luca Coelho Fixes: 78a19d5285d9 ("iwlwifi: mvm: Read the PPAG and SAR tables at INIT stage") Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/iwlwifi.20220128144623.96f683a89b42.I14e2985bfd7ddd8a8d83eb1869b800c0e7f30db4@changeid --- drivers/net/wireless/intel/iwlwifi/fw/acpi.c | 11 ++++++----- drivers/net/wireless/intel/iwlwifi/iwl-csr.h | 3 ++- drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 2 +- 3 files changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/fw/acpi.c b/drivers/net/wireless/intel/iwlwifi/fw/acpi.c index 790c96df58cbdc..c17ab53fcd8ff5 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/acpi.c +++ b/drivers/net/wireless/intel/iwlwifi/fw/acpi.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause /* * Copyright (C) 2017 Intel Deutschland GmbH - * Copyright (C) 2019-2021 Intel Corporation + * Copyright (C) 2019-2022 Intel Corporation */ #include #include "iwl-drv.h" @@ -888,10 +888,11 @@ bool iwl_sar_geo_support(struct iwl_fw_runtime *fwrt) * only one using version 36, so skip this version entirely. */ return IWL_UCODE_SERIAL(fwrt->fw->ucode_ver) >= 38 || - IWL_UCODE_SERIAL(fwrt->fw->ucode_ver) == 17 || - (IWL_UCODE_SERIAL(fwrt->fw->ucode_ver) == 29 && - ((fwrt->trans->hw_rev & CSR_HW_REV_TYPE_MSK) == - CSR_HW_REV_TYPE_7265D)); + (IWL_UCODE_SERIAL(fwrt->fw->ucode_ver) == 17 && + fwrt->trans->hw_rev != CSR_HW_REV_TYPE_3160) || + (IWL_UCODE_SERIAL(fwrt->fw->ucode_ver) == 29 && + ((fwrt->trans->hw_rev & CSR_HW_REV_TYPE_MSK) == + CSR_HW_REV_TYPE_7265D)); } IWL_EXPORT_SYMBOL(iwl_sar_geo_support); diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-csr.h b/drivers/net/wireless/intel/iwlwifi/iwl-csr.h index f90d4662c16400..8e10ba88afb315 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-csr.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-csr.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ /* - * Copyright (C) 2005-2014, 2018-2021 Intel Corporation + * Copyright (C) 2005-2014, 2018-2022 Intel Corporation * Copyright (C) 2013-2014 Intel Mobile Communications GmbH * Copyright (C) 2016 Intel Deutschland GmbH */ @@ -329,6 +329,7 @@ enum { #define CSR_HW_REV_TYPE_2x00 (0x0000100) #define CSR_HW_REV_TYPE_105 (0x0000110) #define CSR_HW_REV_TYPE_135 (0x0000120) +#define CSR_HW_REV_TYPE_3160 (0x0000164) #define CSR_HW_REV_TYPE_7265D (0x0000210) #define CSR_HW_REV_TYPE_NONE (0x00001F0) #define CSR_HW_REV_TYPE_QNJ (0x0000360) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c index 6f4690e56a461c..ae589b3b8c46e9 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c @@ -1741,7 +1741,7 @@ int iwl_mvm_up(struct iwl_mvm *mvm) ret = iwl_mvm_sar_init(mvm); if (ret == 0) ret = iwl_mvm_sar_geo_init(mvm); - else if (ret < 0) + if (ret < 0) goto error; ret = iwl_mvm_sgom_init(mvm); From 868d7618d75f2cac23c2be6ca8d55ae1380c36d1 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 3 Feb 2022 11:33:02 +0100 Subject: [PATCH 058/493] platform/x86: thinkpad_acpi: Add dual-fan quirk for T15g (2nd gen) The ThinkPad T15g Gen 2 has 2 fan, add a TPACPI_FAN_2CTL quirk entry for it to the fan_quirk_table[] so that both fans can be controllerd. Reported-and-tested-by: David Dreschner Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20220203103302.49401-1-hdegoede@redhat.com --- drivers/platform/x86/thinkpad_acpi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index bd045486b933fd..3424b080db7729 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -8703,6 +8703,7 @@ static const struct tpacpi_quirk fan_quirk_table[] __initconst = { TPACPI_Q_LNV3('N', '4', '0', TPACPI_FAN_2CTL), /* P1 / X1 Extreme (4nd gen) */ TPACPI_Q_LNV3('N', '3', '0', TPACPI_FAN_2CTL), /* P15 (1st gen) / P15v (1st gen) */ TPACPI_Q_LNV3('N', '3', '2', TPACPI_FAN_2CTL), /* X1 Carbon (9th gen) */ + TPACPI_Q_LNV3('N', '3', '7', TPACPI_FAN_2CTL), /* T15g (2nd gen) */ TPACPI_Q_LNV3('N', '1', 'O', TPACPI_FAN_NOFAN), /* X1 Tablet (2nd gen) */ }; From 3149efcdf2c6314420c418dfc94de53bfd076b1f Mon Sep 17 00:00:00 2001 From: Long Li Date: Wed, 26 Jan 2022 17:43:34 -0800 Subject: [PATCH 059/493] PCI: hv: Fix NUMA node assignment when kernel boots with custom NUMA topology When kernel boots with a NUMA topology with some NUMA nodes offline, the PCI driver should only set an online NUMA node on the device. This can happen during KDUMP where some NUMA nodes are not made online by the KDUMP kernel. This patch also fixes the case where kernel is booting with "numa=off". Fixes: 999dd956d838 ("PCI: hv: Add support for protocol 1.3 and support PCI_BUS_RELATIONS2") Signed-off-by: Long Li Reviewed-by: Michael Kelley Tested-by: Purna Pavan Chandra Aekkaladevi Acked-by: Lorenzo Pieralisi Link: https://lore.kernel.org/r/1643247814-15184-1-git-send-email-longli@linuxonhyperv.com Signed-off-by: Wei Liu --- drivers/pci/controller/pci-hyperv.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c index 20ea2ee330b877..ae0bc2fee4ca8b 100644 --- a/drivers/pci/controller/pci-hyperv.c +++ b/drivers/pci/controller/pci-hyperv.c @@ -2155,8 +2155,17 @@ static void hv_pci_assign_numa_node(struct hv_pcibus_device *hbus) if (!hv_dev) continue; - if (hv_dev->desc.flags & HV_PCI_DEVICE_FLAG_NUMA_AFFINITY) - set_dev_node(&dev->dev, hv_dev->desc.virtual_numa_node); + if (hv_dev->desc.flags & HV_PCI_DEVICE_FLAG_NUMA_AFFINITY && + hv_dev->desc.virtual_numa_node < num_possible_nodes()) + /* + * The kernel may boot with some NUMA nodes offline + * (e.g. in a KDUMP kernel) or with NUMA disabled via + * "numa=off". In those cases, adjust the host provided + * NUMA node to a valid NUMA node used by the kernel. + */ + set_dev_node(&dev->dev, + numa_map_to_online_node( + hv_dev->desc.virtual_numa_node)); put_pcichild(hv_dev); } From f0a6fd1527067da537e9c48390237488719948ed Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 1 Feb 2022 14:09:51 +0100 Subject: [PATCH 060/493] cfg80211: fix race in netlink owner interface destruction MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit My previous fix here to fix the deadlock left a race where the exact same deadlock (see the original commit referenced below) can still happen if cfg80211_destroy_ifaces() already runs while nl80211_netlink_notify() is still marking some interfaces as nl_owner_dead. The race happens because we have two loops here - first we dev_close() all the netdevs, and then we destroy them. If we also have two netdevs (first one need only be a wdev though) then we can find one during the first iteration, close it, and go to the second iteration -- but then find two, and try to destroy also the one we didn't close yet. Fix this by only iterating once. Reported-by: Toke Høiland-Jørgensen Fixes: ea6b2098dd02 ("cfg80211: fix locking in netlink owner interface destruction") Tested-by: Toke Høiland-Jørgensen Link: https://lore.kernel.org/r/20220201130951.22093-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg --- net/wireless/core.c | 17 ++++------------- 1 file changed, 4 insertions(+), 13 deletions(-) diff --git a/net/wireless/core.c b/net/wireless/core.c index 3a54c8e6b6c61c..f08d4b3bb148bd 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -5,7 +5,7 @@ * Copyright 2006-2010 Johannes Berg * Copyright 2013-2014 Intel Mobile Communications GmbH * Copyright 2015-2017 Intel Deutschland GmbH - * Copyright (C) 2018-2021 Intel Corporation + * Copyright (C) 2018-2022 Intel Corporation */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt @@ -332,29 +332,20 @@ static void cfg80211_event_work(struct work_struct *work) void cfg80211_destroy_ifaces(struct cfg80211_registered_device *rdev) { struct wireless_dev *wdev, *tmp; - bool found = false; ASSERT_RTNL(); - list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) { + list_for_each_entry_safe(wdev, tmp, &rdev->wiphy.wdev_list, list) { if (wdev->nl_owner_dead) { if (wdev->netdev) dev_close(wdev->netdev); - found = true; - } - } - - if (!found) - return; - wiphy_lock(&rdev->wiphy); - list_for_each_entry_safe(wdev, tmp, &rdev->wiphy.wdev_list, list) { - if (wdev->nl_owner_dead) { + wiphy_lock(&rdev->wiphy); cfg80211_leave(rdev, wdev); rdev_del_virtual_intf(rdev, wdev); + wiphy_unlock(&rdev->wiphy); } } - wiphy_unlock(&rdev->wiphy); } static void cfg80211_destroy_iface_wk(struct work_struct *work) From fd5dd6acd8f823ea804f76d3af64fa1be9d5fb78 Mon Sep 17 00:00:00 2001 From: Sergio Costas Date: Fri, 4 Feb 2022 10:01:17 +0100 Subject: [PATCH 061/493] HID:Add support for UGTABLET WP5540 This patch adds support for the UGTABLET WP5540 digitizer tablet devices. Without it, the pen moves the cursor, but neither the buttons nor the tap sensor in the tip do work. Signed-off-by: Sergio Costas Link: https://lore.kernel.org/r/63dece1d-91ca-1b1b-d90d-335be66896be@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires --- drivers/hid/hid-ids.h | 1 + drivers/hid/hid-quirks.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 85975031389b34..78bd3ddda44262 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -1370,6 +1370,7 @@ #define USB_VENDOR_ID_UGTIZER 0x2179 #define USB_DEVICE_ID_UGTIZER_TABLET_GP0610 0x0053 #define USB_DEVICE_ID_UGTIZER_TABLET_GT5040 0x0077 +#define USB_DEVICE_ID_UGTIZER_TABLET_WP5540 0x0004 #define USB_VENDOR_ID_VIEWSONIC 0x0543 #define USB_DEVICE_ID_VIEWSONIC_PD1011 0xe621 diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index 9af1dc8ae3a2f3..c066ba901867bd 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -187,6 +187,7 @@ static const struct hid_device_id hid_quirks[] = { { HID_USB_DEVICE(USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_KEYBOARD), HID_QUIRK_NOGET }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_KNA5), HID_QUIRK_MULTI_INPUT }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_TWA60), HID_QUIRK_MULTI_INPUT }, + { HID_USB_DEVICE(USB_VENDOR_ID_UGTIZER, USB_DEVICE_ID_UGTIZER_TABLET_WP5540), HID_QUIRK_MULTI_INPUT }, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH), HID_QUIRK_MULTI_INPUT }, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_14_1_INCH), HID_QUIRK_MULTI_INPUT }, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SIRIUS_BATTERY_FREE_TABLET), HID_QUIRK_MULTI_INPUT }, From e3d13da7f77d73c64981b62591c21614a6cf688f Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 5 Feb 2022 12:28:40 +0100 Subject: [PATCH 062/493] platform/x86: asus-wmi: Fix regression when probing for fan curve control The fan curve control patches introduced a regression for at least the TUF FX506 and possibly other TUF series laptops that do not have support for fan curve control. As part of the probing process, asus_wmi_evaluate_method_buf is called to get the factory default fan curve . The WMI management function returns 0 on certain laptops to indicate lack of fan curve control instead of ASUS_WMI_UNSUPPORTED_METHOD. This 0 is transformed to -ENODATA which results in failure when probing. Fixes: 0f0ac158d28f ("platform/x86: asus-wmi: Add support for custom fan curves") Reported-and-tested-by: Abhijeet V Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20220205112840.33095-1-hdegoede@redhat.com --- drivers/platform/x86/asus-wmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index a3b83b22a3b13d..2104a2621e5070 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -2223,7 +2223,7 @@ static int fan_curve_check_present(struct asus_wmi *asus, bool *available, err = fan_curve_get_factory_default(asus, fan_dev); if (err) { - if (err == -ENODEV) + if (err == -ENODEV || err == -ENODATA) return 0; return err; } From 9bb162fa26ed76031ed0e7dbc77ccea0bf977758 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Tue, 7 Dec 2021 06:10:05 +0000 Subject: [PATCH 063/493] powerpc/603: Fix boot failure with DEBUG_PAGEALLOC and KFENCE Allthough kernel text is always mapped with BATs, we still have inittext mapped with pages, so TLB miss handling is required when CONFIG_DEBUG_PAGEALLOC or CONFIG_KFENCE is set. The final solution should be to set a BAT that also maps inittext but that BAT then needs to be cleared at end of init, and it will require more changes to be able to do it properly. As DEBUG_PAGEALLOC or KFENCE are debugging, performance is not a big deal so let's fix it simply for now to enable easy stable application. Fixes: 035b19a15a98 ("powerpc/32s: Always map kernel text and rodata with BATs") Cc: stable@vger.kernel.org # v5.11+ Reported-by: Maxime Bizon Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/aea33b4813a26bdb9378b5f273f00bd5d4abe240.1638857364.git.christophe.leroy@csgroup.eu --- arch/powerpc/kernel/head_book3s_32.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/head_book3s_32.S b/arch/powerpc/kernel/head_book3s_32.S index fa84744d6b2486..b876ef8c70a7da 100644 --- a/arch/powerpc/kernel/head_book3s_32.S +++ b/arch/powerpc/kernel/head_book3s_32.S @@ -421,14 +421,14 @@ InstructionTLBMiss: */ /* Get PTE (linux-style) and check access */ mfspr r3,SPRN_IMISS -#ifdef CONFIG_MODULES +#if defined(CONFIG_MODULES) || defined(CONFIG_DEBUG_PAGEALLOC) || defined(CONFIG_KFENCE) lis r1, TASK_SIZE@h /* check if kernel address */ cmplw 0,r1,r3 #endif mfspr r2, SPRN_SDR1 li r1,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC | _PAGE_USER rlwinm r2, r2, 28, 0xfffff000 -#ifdef CONFIG_MODULES +#if defined(CONFIG_MODULES) || defined(CONFIG_DEBUG_PAGEALLOC) || defined(CONFIG_KFENCE) bgt- 112f lis r2, (swapper_pg_dir - PAGE_OFFSET)@ha /* if kernel address, use */ li r1,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC From 9495b9b31abe525ebd93da58de2c88b9f66d3a0e Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Fri, 23 Feb 2018 22:42:31 +0100 Subject: [PATCH 064/493] i2c: bcm2835: Avoid clock stretching timeouts The CLKT register contains at poweron 0x40, which at our typical 100kHz bus rate means .64ms. But there is no specified limit to how long devices should be able to stretch the clocks, so just disable the timeout. We still have a timeout wrapping the entire transfer. Signed-off-by: Eric Anholt Signed-off-by: Stefan Wahren BugLink: https://github.com/raspberrypi/linux/issues/3064 Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-bcm2835.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c index dfc534065595f2..5149454eef4a57 100644 --- a/drivers/i2c/busses/i2c-bcm2835.c +++ b/drivers/i2c/busses/i2c-bcm2835.c @@ -23,6 +23,11 @@ #define BCM2835_I2C_FIFO 0x10 #define BCM2835_I2C_DIV 0x14 #define BCM2835_I2C_DEL 0x18 +/* + * 16-bit field for the number of SCL cycles to wait after rising SCL + * before deciding the slave is not responding. 0 disables the + * timeout detection. + */ #define BCM2835_I2C_CLKT 0x1c #define BCM2835_I2C_C_READ BIT(0) @@ -474,6 +479,12 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) adap->dev.of_node = pdev->dev.of_node; adap->quirks = of_device_get_match_data(&pdev->dev); + /* + * Disable the hardware clock stretching timeout. SMBUS + * specifies a limit for how long the device can stretch the + * clock, but core I2C doesn't. + */ + bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_CLKT, 0); bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, 0); ret = i2c_add_adapter(adap); From 18a1d5e1945385d9b5adc3fe11427ce4a9d2826e Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 7 Feb 2022 17:16:39 +0200 Subject: [PATCH 065/493] parisc: Add ioread64_lo_hi() and iowrite64_lo_hi() It's a followup to the previous commit f15309d7ad5d ("parisc: Add ioread64_hi_lo() and iowrite64_hi_lo()") which does only half of the job. Add the rest, so we won't get a new kernel test robot reports. Fixes: f15309d7ad5d ("parisc: Add ioread64_hi_lo() and iowrite64_hi_lo()") Signed-off-by: Andy Shevchenko Signed-off-by: Helge Deller --- arch/parisc/lib/iomap.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/parisc/lib/iomap.c b/arch/parisc/lib/iomap.c index 367f6397bda7a4..86038505808573 100644 --- a/arch/parisc/lib/iomap.c +++ b/arch/parisc/lib/iomap.c @@ -346,6 +346,16 @@ u64 ioread64be(const void __iomem *addr) return *((u64 *)addr); } +u64 ioread64_lo_hi(const void __iomem *addr) +{ + u32 low, high; + + low = ioread32(addr); + high = ioread32(addr + sizeof(u32)); + + return low + ((u64)high << 32); +} + u64 ioread64_hi_lo(const void __iomem *addr) { u32 low, high; @@ -419,6 +429,12 @@ void iowrite64be(u64 datum, void __iomem *addr) } } +void iowrite64_lo_hi(u64 val, void __iomem *addr) +{ + iowrite32(val, addr); + iowrite32(val >> 32, addr + sizeof(u32)); +} + void iowrite64_hi_lo(u64 val, void __iomem *addr) { iowrite32(val >> 32, addr + sizeof(u32)); @@ -530,6 +546,7 @@ EXPORT_SYMBOL(ioread32); EXPORT_SYMBOL(ioread32be); EXPORT_SYMBOL(ioread64); EXPORT_SYMBOL(ioread64be); +EXPORT_SYMBOL(ioread64_lo_hi); EXPORT_SYMBOL(ioread64_hi_lo); EXPORT_SYMBOL(iowrite8); EXPORT_SYMBOL(iowrite16); @@ -538,6 +555,7 @@ EXPORT_SYMBOL(iowrite32); EXPORT_SYMBOL(iowrite32be); EXPORT_SYMBOL(iowrite64); EXPORT_SYMBOL(iowrite64be); +EXPORT_SYMBOL(iowrite64_lo_hi); EXPORT_SYMBOL(iowrite64_hi_lo); EXPORT_SYMBOL(ioread8_rep); EXPORT_SYMBOL(ioread16_rep); From 8bc69f86328e87a0ffa79438430cc82f3aa6a194 Mon Sep 17 00:00:00 2001 From: Miaoqian Lin Date: Fri, 4 Feb 2022 01:30:08 +0800 Subject: [PATCH 066/493] Drivers: hv: vmbus: Fix memory leak in vmbus_add_channel_kobj MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit kobject_init_and_add() takes reference even when it fails. According to the doc of kobject_init_and_add(): If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Fix memory leak by calling kobject_put(). Fixes: c2e5df616e1a ("vmbus: add per-channel sysfs info") Signed-off-by: Miaoqian Lin Reviewed-by: Juan Vazquez Link: https://lore.kernel.org/r/20220203173008.43480-1-linmq006@gmail.com Signed-off-by: Wei Liu --- drivers/hv/vmbus_drv.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index 17bf55fe316976..34a4fd21bdf507 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -2028,8 +2028,10 @@ int vmbus_add_channel_kobj(struct hv_device *dev, struct vmbus_channel *channel) kobj->kset = dev->channels_kset; ret = kobject_init_and_add(kobj, &vmbus_chan_ktype, NULL, "%u", relid); - if (ret) + if (ret) { + kobject_put(kobj); return ret; + } ret = sysfs_create_group(kobj, &vmbus_chan_group); @@ -2038,6 +2040,7 @@ int vmbus_add_channel_kobj(struct hv_device *dev, struct vmbus_channel *channel) * The calling functions' error handling paths will cleanup the * empty channel directory. */ + kobject_put(kobj); dev_err(device, "Unable to set up channel sysfs files\n"); return ret; } From 6bf625a4140f24b490766043b307f8252519578b Mon Sep 17 00:00:00 2001 From: Michael Kelley Date: Sun, 6 Feb 2022 11:36:56 -0800 Subject: [PATCH 067/493] Drivers: hv: vmbus: Rework use of DMA_BIT_MASK(64) Using DMA_BIT_MASK(64) as an initializer for a global variable causes problems with Clang 12.0.1. The compiler doesn't understand that value 64 is excluded from the shift at compile time, resulting in a build error. While this is a compiler problem, avoid the issue by setting up the dma_mask memory as part of struct hv_device, and initialize it using dma_set_mask(). Reported-by: Nathan Chancellor Reported-by: Vitaly Chikunov Reported-by: Jakub Kicinski Fixes: 743b237c3a7b ("scsi: storvsc: Add Isolation VM support for storvsc driver") Signed-off-by: Michael Kelley Reviewed-by: Nathan Chancellor Tested-by: Nathan Chancellor Link: https://lore.kernel.org/r/1644176216-12531-1-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu --- drivers/hv/vmbus_drv.c | 4 ++-- include/linux/hyperv.h | 1 + 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index 34a4fd21bdf507..12a2b37e87f305 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -2082,7 +2082,6 @@ struct hv_device *vmbus_device_create(const guid_t *type, return child_device_obj; } -static u64 vmbus_dma_mask = DMA_BIT_MASK(64); /* * vmbus_device_register - Register the child device */ @@ -2123,8 +2122,9 @@ int vmbus_device_register(struct hv_device *child_device_obj) } hv_debug_add_dev_dir(child_device_obj); - child_device_obj->device.dma_mask = &vmbus_dma_mask; child_device_obj->device.dma_parms = &child_device_obj->dma_parms; + child_device_obj->device.dma_mask = &child_device_obj->dma_mask; + dma_set_mask(&child_device_obj->device, DMA_BIT_MASK(64)); return 0; err_kset_unregister: diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index f565a893883643..fe2e0179ed51e3 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -1262,6 +1262,7 @@ struct hv_device { struct vmbus_channel *channel; struct kset *channels_kset; struct device_dma_parameters dma_parms; + u64 dma_mask; /* place holder to keep track of the dir for hv device in debugfs */ struct dentry *debug_dir; From ea85bf906466191b58532bb19f4fbb4591f0a77e Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Sat, 5 Feb 2022 22:57:42 +0100 Subject: [PATCH 068/493] iio: imu: st_lsm6dsx: wait for settling time in st_lsm6dsx_read_oneshot We need to wait for sensor settling time (~ 3/ODR) before reading data in st_lsm6dsx_read_oneshot routine in order to avoid corrupted samples. Fixes: 290a6ce11d93 ("iio: imu: add support to lsm6dsx driver") Reported-by: Mario Tesi Tested-by: Mario Tesi Signed-off-by: Lorenzo Bianconi Link: https://lore.kernel.org/r/b41ebda5535895298716c76d939f9f165fcd2d13.1644098120.git.lorenzo@kernel.org Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c index 727b4b6ac69663..93f0c6bce502cd 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -1374,8 +1374,12 @@ static int st_lsm6dsx_read_oneshot(struct st_lsm6dsx_sensor *sensor, if (err < 0) return err; + /* + * we need to wait for sensor settling time before + * reading data in order to avoid corrupted samples + */ delay = 1000000000 / sensor->odr; - usleep_range(delay, 2 * delay); + usleep_range(3 * delay, 4 * delay); err = st_lsm6dsx_read_locked(hw, addr, &data, sizeof(data)); if (err < 0) From 946eb87114af37c9c13c618a7c1cdaca936905fa Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 7 Feb 2022 08:09:23 -0800 Subject: [PATCH 069/493] ASoC: Revert "ASoC: mediatek: Check for error clk pointer" This reverts commit 9de2b9286a6d ("ASoC: mediatek: Check for error clk pointer"). With this patch in the tree, Chromebooks running the affected hardware no longer boot. Bisect points to this patch, and reverting it fixes the problem. An analysis of the code with this patch applied shows: ret = init_clks(pdev, clk); if (ret) return ERR_PTR(ret); ... for (j = 0; j < MAX_CLKS && data->clk_id[j]; j++) { struct clk *c = clk[data->clk_id[j]]; if (IS_ERR(c)) { dev_err(&pdev->dev, "%s: clk unavailable\n", data->name); return ERR_CAST(c); } scpd->clk[j] = c; } Not all clocks in the clk_names array have to be present. Only the clocks in the data->clk_id array are actually needed. The code already checks if the required clocks are available and bails out if not. The assumption that all clocks have to be present is wrong, and commit 9de2b9286a6d ("ASoC: mediatek: Check for error clk pointer") needs to be reverted. Cc: Jiasheng Jiang Cc: Mark Brown Cc: James Liao Cc: Kevin Hilman Cc: Matthias Brugger Reported-by: Frank Wunderlich Reported-by: Daniel Golle Fixes: 9de2b9286a6d ("ASoC: mediatek: Check for error clk pointer") Signed-off-by: Guenter Roeck Link: https://lore.kernel.org/r/20220207160923.3911501-1-linux@roeck-us.net Signed-off-by: Mark Brown --- drivers/soc/mediatek/mtk-scpsys.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c index 670cc82d17dc2c..ca75b14931ec9e 100644 --- a/drivers/soc/mediatek/mtk-scpsys.c +++ b/drivers/soc/mediatek/mtk-scpsys.c @@ -411,17 +411,12 @@ static int scpsys_power_off(struct generic_pm_domain *genpd) return ret; } -static int init_clks(struct platform_device *pdev, struct clk **clk) +static void init_clks(struct platform_device *pdev, struct clk **clk) { int i; - for (i = CLK_NONE + 1; i < CLK_MAX; i++) { + for (i = CLK_NONE + 1; i < CLK_MAX; i++) clk[i] = devm_clk_get(&pdev->dev, clk_names[i]); - if (IS_ERR(clk[i])) - return PTR_ERR(clk[i]); - } - - return 0; } static struct scp *init_scp(struct platform_device *pdev, @@ -431,7 +426,7 @@ static struct scp *init_scp(struct platform_device *pdev, { struct genpd_onecell_data *pd_data; struct resource *res; - int i, j, ret; + int i, j; struct scp *scp; struct clk *clk[CLK_MAX]; @@ -486,9 +481,7 @@ static struct scp *init_scp(struct platform_device *pdev, pd_data->num_domains = num; - ret = init_clks(pdev, clk); - if (ret) - return ERR_PTR(ret); + init_clks(pdev, clk); for (i = 0; i < num; i++) { struct scp_domain *scpd = &scp->domains[i]; From 307f31452078792aab94a729fce33200c6e42dc4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Martin=20Povi=C5=A1er?= Date: Fri, 4 Feb 2022 10:53:01 +0100 Subject: [PATCH 070/493] ASoC: tas2770: Insert post reset delay MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Per TAS2770 datasheet there must be a 1 ms delay from reset to first command. So insert delays into the driver where appropriate. Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by: Martin Povišer Link: https://lore.kernel.org/r/20220204095301.5554-1-povik+lin@cutebit.org Signed-off-by: Mark Brown --- sound/soc/codecs/tas2770.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/tas2770.c b/sound/soc/codecs/tas2770.c index 6549e7fef3e323..c5ea3b115966b8 100644 --- a/sound/soc/codecs/tas2770.c +++ b/sound/soc/codecs/tas2770.c @@ -38,10 +38,12 @@ static void tas2770_reset(struct tas2770_priv *tas2770) gpiod_set_value_cansleep(tas2770->reset_gpio, 0); msleep(20); gpiod_set_value_cansleep(tas2770->reset_gpio, 1); + usleep_range(1000, 2000); } snd_soc_component_write(tas2770->component, TAS2770_SW_RST, TAS2770_RST); + usleep_range(1000, 2000); } static int tas2770_set_bias_level(struct snd_soc_component *component, @@ -110,6 +112,7 @@ static int tas2770_codec_resume(struct snd_soc_component *component) if (tas2770->sdz_gpio) { gpiod_set_value_cansleep(tas2770->sdz_gpio, 1); + usleep_range(1000, 2000); } else { ret = snd_soc_component_update_bits(component, TAS2770_PWR_CTRL, TAS2770_PWR_CTRL_MASK, @@ -510,8 +513,10 @@ static int tas2770_codec_probe(struct snd_soc_component *component) tas2770->component = component; - if (tas2770->sdz_gpio) + if (tas2770->sdz_gpio) { gpiod_set_value_cansleep(tas2770->sdz_gpio, 1); + usleep_range(1000, 2000); + } tas2770_reset(tas2770); From d7b530fdc45e75a54914a194c4becd9672a4e24f Mon Sep 17 00:00:00 2001 From: Kai Vehmanen Date: Mon, 7 Feb 2022 17:29:58 +0200 Subject: [PATCH 071/493] ASoC: rt5682s: do not block workqueue if card is unbound MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The current rt5682s_jack_detect_handler() assumes the component and card will always show up and implements an infinite usleep loop waiting for them to show up. This does not hold true if a codec interrupt (or other event) occurs when the card is unbound. The codec driver's remove or shutdown functions cannot cancel the workqueue due to the wait loop. As a result, code can either end up blocking the workqueue, or hit a kernel oops when the card is freed. Fix the issue by rescheduling the jack detect handler in case the card is not ready. In case card never shows up, the shutdown/remove/suspend calls can now cancel the detect task. Signed-off-by: Kai Vehmanen Reviewed-by: Bard Liao Reviewed-by: Ranjani Sridharan Reviewed-by: Pierre-Louis Bossart Reviewed-by: Péter Ujfalusi Reviewed-by: Shuming Fan Link: https://lore.kernel.org/r/20220207153000.3452802-1-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/codecs/rt5682s.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/rt5682s.c b/sound/soc/codecs/rt5682s.c index efa1016831dd21..1e662d1be2b3e7 100644 --- a/sound/soc/codecs/rt5682s.c +++ b/sound/soc/codecs/rt5682s.c @@ -824,11 +824,13 @@ static void rt5682s_jack_detect_handler(struct work_struct *work) container_of(work, struct rt5682s_priv, jack_detect_work.work); int val, btn_type; - while (!rt5682s->component) - usleep_range(10000, 15000); - - while (!rt5682s->component->card->instantiated) - usleep_range(10000, 15000); + if (!rt5682s->component || !rt5682s->component->card || + !rt5682s->component->card->instantiated) { + /* card not yet ready, try later */ + mod_delayed_work(system_power_efficient_wq, + &rt5682s->jack_detect_work, msecs_to_jiffies(15)); + return; + } mutex_lock(&rt5682s->jdet_mutex); mutex_lock(&rt5682s->calibrate_mutex); From a6d78661dc903d90a327892bbc34268f3a5f4b9c Mon Sep 17 00:00:00 2001 From: Kai Vehmanen Date: Mon, 7 Feb 2022 17:29:59 +0200 Subject: [PATCH 072/493] ASoC: rt5668: do not block workqueue if card is unbound MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The current rt5668_jack_detect_handler() assumes the component and card will always show up and implements an infinite usleep loop waiting for them to show up. This does not hold true if a codec interrupt (or other event) occurs when the card is unbound. The codec driver's remove or shutdown functions cannot cancel the workqueue due to the wait loop. As a result, code can either end up blocking the workqueue, or hit a kernel oops when the card is freed. Fix the issue by rescheduling the jack detect handler in case the card is not ready. In case card never shows up, the shutdown/remove/suspend calls can now cancel the detect task. Signed-off-by: Kai Vehmanen Reviewed-by: Bard Liao Reviewed-by: Ranjani Sridharan Reviewed-by: Pierre-Louis Bossart Reviewed-by: Péter Ujfalusi Reviewed-by: Shuming Fan Link: https://lore.kernel.org/r/20220207153000.3452802-2-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/codecs/rt5668.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/rt5668.c b/sound/soc/codecs/rt5668.c index fb09715bf9328b..5b12cbf2ba2154 100644 --- a/sound/soc/codecs/rt5668.c +++ b/sound/soc/codecs/rt5668.c @@ -1022,11 +1022,13 @@ static void rt5668_jack_detect_handler(struct work_struct *work) container_of(work, struct rt5668_priv, jack_detect_work.work); int val, btn_type; - while (!rt5668->component) - usleep_range(10000, 15000); - - while (!rt5668->component->card->instantiated) - usleep_range(10000, 15000); + if (!rt5668->component || !rt5668->component->card || + !rt5668->component->card->instantiated) { + /* card not yet ready, try later */ + mod_delayed_work(system_power_efficient_wq, + &rt5668->jack_detect_work, msecs_to_jiffies(15)); + return; + } mutex_lock(&rt5668->calibrate_mutex); From 4c33de0673ced9c7c37b3bbd9bfe0fda72340b2a Mon Sep 17 00:00:00 2001 From: Kai Vehmanen Date: Mon, 7 Feb 2022 17:30:00 +0200 Subject: [PATCH 073/493] ASoC: rt5682: do not block workqueue if card is unbound MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The current rt5682_jack_detect_handler() assumes the component and card will always show up and implements an infinite usleep loop waiting for them to show up. This does not hold true if a codec interrupt (or other event) occurs when the card is unbound. The codec driver's remove or shutdown functions cannot cancel the workqueue due to the wait loop. As a result, code can either end up blocking the workqueue, or hit a kernel oops when the card is freed. Fix the issue by rescheduling the jack detect handler in case the card is not ready. In case card never shows up, the shutdown/remove/suspend calls can now cancel the detect task. Signed-off-by: Kai Vehmanen Reviewed-by: Bard Liao Reviewed-by: Ranjani Sridharan Reviewed-by: Pierre-Louis Bossart Reviewed-by: Péter Ujfalusi Reviewed-by: Shuming Fan Link: https://lore.kernel.org/r/20220207153000.3452802-3-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/codecs/rt5682.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c index 0a0ec4a021e111..be68d573a49064 100644 --- a/sound/soc/codecs/rt5682.c +++ b/sound/soc/codecs/rt5682.c @@ -1092,11 +1092,13 @@ void rt5682_jack_detect_handler(struct work_struct *work) struct snd_soc_dapm_context *dapm; int val, btn_type; - while (!rt5682->component) - usleep_range(10000, 15000); - - while (!rt5682->component->card->instantiated) - usleep_range(10000, 15000); + if (!rt5682->component || !rt5682->component->card || + !rt5682->component->card->instantiated) { + /* card not yet ready, try later */ + mod_delayed_work(system_power_efficient_wq, + &rt5682->jack_detect_work, msecs_to_jiffies(15)); + return; + } dapm = snd_soc_component_get_dapm(rt5682->component); From 4e2a354e3775870ca823f1fb29bbbffbe11059a6 Mon Sep 17 00:00:00 2001 From: Oliver Barta Date: Tue, 8 Feb 2022 09:46:45 +0100 Subject: [PATCH 074/493] regulator: core: fix false positive in regulator_late_cleanup() The check done by regulator_late_cleanup() to detect whether a regulator is on was inconsistent with the check done by _regulator_is_enabled(). While _regulator_is_enabled() takes the enable GPIO into account, regulator_late_cleanup() was not doing that. This resulted in a false positive, e.g. when a GPIO-controlled fixed regulator was used, which was not enabled at boot time, e.g. reg_disp_1v2: reg_disp_1v2 { compatible = "regulator-fixed"; regulator-name = "display_1v2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; gpio = <&tlmm 148 0>; enable-active-high; }; Such regulator doesn't have an is_enabled() operation. Nevertheless it's state can be determined based on the enable GPIO. The check in regulator_late_cleanup() wrongly assumed that the regulator is on and tried to disable it. Signed-off-by: Oliver Barta Link: https://lore.kernel.org/r/20220208084645.8686-1-oliver.barta@aptiv.com Signed-off-by: Mark Brown --- drivers/regulator/core.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 86aa4141efa924..d2553970a67ba7 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -6014,9 +6014,8 @@ core_initcall(regulator_init); static int regulator_late_cleanup(struct device *dev, void *data) { struct regulator_dev *rdev = dev_to_rdev(dev); - const struct regulator_ops *ops = rdev->desc->ops; struct regulation_constraints *c = rdev->constraints; - int enabled, ret; + int ret; if (c && c->always_on) return 0; @@ -6029,14 +6028,8 @@ static int regulator_late_cleanup(struct device *dev, void *data) if (rdev->use_count) goto unlock; - /* If we can't read the status assume it's always on. */ - if (ops->is_enabled) - enabled = ops->is_enabled(rdev); - else - enabled = 1; - - /* But if reading the status failed, assume that it's off. */ - if (enabled <= 0) + /* If reading the status failed, assume that it's off. */ + if (_regulator_is_enabled(rdev) <= 0) goto unlock; if (have_full_constraints()) { From ab3824427b848da10e9fe2727f035bbeecae6ff4 Mon Sep 17 00:00:00 2001 From: Zhou Qingyang Date: Wed, 1 Dec 2021 01:22:53 +0800 Subject: [PATCH 075/493] spi: spi-zynq-qspi: Fix a NULL pointer dereference in zynq_qspi_exec_mem_op() In zynq_qspi_exec_mem_op(), kzalloc() is directly used in memset(), which could lead to a NULL pointer dereference on failure of kzalloc(). Fix this bug by adding a check of tmpbuf. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_SPI_ZYNQ_QSPI=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: 67dca5e580f1 ("spi: spi-mem: Add support for Zynq QSPI controller") Signed-off-by: Zhou Qingyang Link: https://lore.kernel.org/r/20211130172253.203700-1-zhou1615@umn.edu Signed-off-by: Mark Brown --- drivers/spi/spi-zynq-qspi.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/spi/spi-zynq-qspi.c b/drivers/spi/spi-zynq-qspi.c index cfa222c9bd5e74..78f31b61a2aac4 100644 --- a/drivers/spi/spi-zynq-qspi.c +++ b/drivers/spi/spi-zynq-qspi.c @@ -570,6 +570,9 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem, if (op->dummy.nbytes) { tmpbuf = kzalloc(op->dummy.nbytes, GFP_KERNEL); + if (!tmpbuf) + return -ENOMEM; + memset(tmpbuf, 0xff, op->dummy.nbytes); reinit_completion(&xqspi->data_completion); xqspi->txbuf = tmpbuf; From 54309fde1a352ad2674ebba004a79f7d20b9f037 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20L=C3=B6hle?= Date: Fri, 4 Feb 2022 15:11:37 +0000 Subject: [PATCH 076/493] mmc: block: fix read single on recovery logic On reads with MMC_READ_MULTIPLE_BLOCK that fail, the recovery handler will use MMC_READ_SINGLE_BLOCK for each of the blocks, up to MMC_READ_SINGLE_RETRIES times each. The logic for this is fixed to never report unsuccessful reads as success to the block layer. On command error with retries remaining, blk_update_request was called with whatever value error was set last to. In case it was last set to BLK_STS_OK (default), the read will be reported as success, even though there was no data read from the device. This could happen on a CRC mismatch for the response, a card rejecting the command (e.g. again due to a CRC mismatch). In case it was last set to BLK_STS_IOERR, the error is reported correctly, but no retries will be attempted. Fixes: 81196976ed946c ("mmc: block: Add blk-mq support") Cc: stable@vger.kernel.org Signed-off-by: Christian Loehle Reviewed-by: Adrian Hunter Link: https://lore.kernel.org/r/bc706a6ab08c4fe2834ba0c05a804672@hyperstone.com Signed-off-by: Ulf Hansson --- drivers/mmc/core/block.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index 4e61b28a002f66..8d718aa56d33e6 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -1682,31 +1682,31 @@ static void mmc_blk_read_single(struct mmc_queue *mq, struct request *req) struct mmc_card *card = mq->card; struct mmc_host *host = card->host; blk_status_t error = BLK_STS_OK; - int retries = 0; do { u32 status; int err; + int retries = 0; - mmc_blk_rw_rq_prep(mqrq, card, 1, mq); + while (retries++ <= MMC_READ_SINGLE_RETRIES) { + mmc_blk_rw_rq_prep(mqrq, card, 1, mq); - mmc_wait_for_req(host, mrq); + mmc_wait_for_req(host, mrq); - err = mmc_send_status(card, &status); - if (err) - goto error_exit; - - if (!mmc_host_is_spi(host) && - !mmc_ready_for_data(status)) { - err = mmc_blk_fix_state(card, req); + err = mmc_send_status(card, &status); if (err) goto error_exit; - } - if (mrq->cmd->error && retries++ < MMC_READ_SINGLE_RETRIES) - continue; + if (!mmc_host_is_spi(host) && + !mmc_ready_for_data(status)) { + err = mmc_blk_fix_state(card, req); + if (err) + goto error_exit; + } - retries = 0; + if (!mrq->cmd->error) + break; + } if (mrq->cmd->error || mrq->data->error || From dd4589eee99db8f61f7b8f7df1531cad3f74a64d Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Fri, 4 Feb 2022 21:41:55 +0000 Subject: [PATCH 077/493] Revert "svm: Add warning message for AVIC IPI invalid target" Remove a WARN on an "AVIC IPI invalid target" exit, the WARN is trivial to trigger from guest as it will fail on any destination APIC ID that doesn't exist from the guest's perspective. Don't bother recording anything in the kernel log, the common tracepoint for kvm_avic_incomplete_ipi() is sufficient for debugging. This reverts commit 37ef0c4414c9743ba7f1af4392f0a27a99649f2a. Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson Message-Id: <20220204214205.3306634-2-seanjc@google.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm/avic.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c index 90364d02f22aad..ecc81c48c0cae5 100644 --- a/arch/x86/kvm/svm/avic.c +++ b/arch/x86/kvm/svm/avic.c @@ -345,8 +345,6 @@ int avic_incomplete_ipi_interception(struct kvm_vcpu *vcpu) avic_kick_target_vcpus(vcpu->kvm, apic, icrl, icrh); break; case AVIC_IPI_FAILURE_INVALID_TARGET: - WARN_ONCE(1, "Invalid IPI target: index=%u, vcpu=%d, icr=%#0x:%#0x\n", - index, vcpu->vcpu_id, icrh, icrl); break; case AVIC_IPI_FAILURE_INVALID_BACKING_PAGE: WARN_ONCE(1, "Invalid backing page\n"); From c53bbe2145f51d3bc0438c2db02e737b9b598bf3 Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Mon, 7 Feb 2022 17:54:18 +0200 Subject: [PATCH 078/493] KVM: x86: SVM: don't passthrough SMAP/SMEP/PKE bits in !NPT && !gCR0.PG case When the guest doesn't enable paging, and NPT/EPT is disabled, we use guest't paging CR3's as KVM's shadow paging pointer and we are technically in direct mode as if we were to use NPT/EPT. In direct mode we create SPTEs with user mode permissions because usually in the direct mode the NPT/EPT doesn't need to restrict access based on guest CPL (there are MBE/GMET extenstions for that but KVM doesn't use them). In this special "use guest paging as direct" mode however, and if CR4.SMAP/CR4.SMEP are enabled, that will make the CPU fault on each access and KVM will enter endless loop of page faults. Since page protection doesn't have any meaning in !PG case, just don't passthrough these bits. The fix is the same as was done for VMX in commit: commit 656ec4a4928a ("KVM: VMX: fix SMEP and SMAP without EPT") This fixes the boot of windows 10 without NPT for good. (Without this patch, BSP boots, but APs were stuck in endless loop of page faults, causing the VM boot with 1 CPU) Signed-off-by: Maxim Levitsky Cc: stable@vger.kernel.org Message-Id: <20220207155447.840194-2-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm/svm.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c index a290efb272ad16..0a1f31e502bbdc 100644 --- a/arch/x86/kvm/svm/svm.c +++ b/arch/x86/kvm/svm/svm.c @@ -1585,6 +1585,7 @@ void svm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0) { struct vcpu_svm *svm = to_svm(vcpu); u64 hcr0 = cr0; + bool old_paging = is_paging(vcpu); #ifdef CONFIG_X86_64 if (vcpu->arch.efer & EFER_LME && !vcpu->arch.guest_state_protected) { @@ -1601,8 +1602,11 @@ void svm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0) #endif vcpu->arch.cr0 = cr0; - if (!npt_enabled) + if (!npt_enabled) { hcr0 |= X86_CR0_PG | X86_CR0_WP; + if (old_paging != is_paging(vcpu)) + svm_set_cr4(vcpu, kvm_read_cr4(vcpu)); + } /* * re-enable caching here because the QEMU bios @@ -1646,8 +1650,12 @@ void svm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4) svm_flush_tlb(vcpu); vcpu->arch.cr4 = cr4; - if (!npt_enabled) + if (!npt_enabled) { cr4 |= X86_CR4_PAE; + + if (!is_paging(vcpu)) + cr4 &= ~(X86_CR4_SMEP | X86_CR4_SMAP | X86_CR4_PKE); + } cr4 |= host_cr4_mce; to_svm(vcpu)->vmcb->save.cr4 = cr4; vmcb_mark_dirty(to_svm(vcpu)->vmcb, VMCB_CR); From e1779c2714c3023e4629825762bcbc43a3b943df Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Mon, 7 Feb 2022 17:54:19 +0200 Subject: [PATCH 079/493] KVM: x86: nSVM: fix potential NULL derefernce on nested migration Turns out that due to review feedback and/or rebases I accidentally moved the call to nested_svm_load_cr3 to be too early, before the NPT is enabled, which is very wrong to do. KVM can't even access guest memory at that point as nested NPT is needed for that, and of course it won't initialize the walk_mmu, which is main issue the patch was addressing. Fix this for real. Fixes: 232f75d3b4b5 ("KVM: nSVM: call nested_svm_load_cr3 on nested state load") Cc: stable@vger.kernel.org Signed-off-by: Maxim Levitsky Message-Id: <20220207155447.840194-3-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm/nested.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) diff --git a/arch/x86/kvm/svm/nested.c b/arch/x86/kvm/svm/nested.c index 1218b5a342fc85..39d280e7e80ef5 100644 --- a/arch/x86/kvm/svm/nested.c +++ b/arch/x86/kvm/svm/nested.c @@ -1457,18 +1457,6 @@ static int svm_set_nested_state(struct kvm_vcpu *vcpu, !__nested_vmcb_check_save(vcpu, &save_cached)) goto out_free; - /* - * While the nested guest CR3 is already checked and set by - * KVM_SET_SREGS, it was set when nested state was yet loaded, - * thus MMU might not be initialized correctly. - * Set it again to fix this. - */ - - ret = nested_svm_load_cr3(&svm->vcpu, vcpu->arch.cr3, - nested_npt_enabled(svm), false); - if (WARN_ON_ONCE(ret)) - goto out_free; - /* * All checks done, we can enter guest mode. Userspace provides @@ -1494,6 +1482,20 @@ static int svm_set_nested_state(struct kvm_vcpu *vcpu, svm_switch_vmcb(svm, &svm->nested.vmcb02); nested_vmcb02_prepare_control(svm); + + /* + * While the nested guest CR3 is already checked and set by + * KVM_SET_SREGS, it was set when nested state was yet loaded, + * thus MMU might not be initialized correctly. + * Set it again to fix this. + */ + + ret = nested_svm_load_cr3(&svm->vcpu, vcpu->arch.cr3, + nested_npt_enabled(svm), false); + if (WARN_ON_ONCE(ret)) + goto out_free; + + kvm_make_request(KVM_REQ_GET_NESTED_STATE_PAGES, vcpu); ret = 0; out_free: From e8efa4ff00374d2e6f47f6e4628ca3b541c001af Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Mon, 7 Feb 2022 17:54:20 +0200 Subject: [PATCH 080/493] KVM: x86: nSVM: mark vmcb01 as dirty when restoring SMM saved state While usually, restoring the smm state makes the KVM enter the nested guest thus a different vmcb (vmcb02 vs vmcb01), KVM should still mark it as dirty, since hardware can in theory cache multiple vmcbs. Failure to do so, combined with lack of setting the nested_run_pending (which is fixed in the next patch), might make KVM re-enter vmcb01, which was just exited from, with completely different set of guest state registers (SMM vs non SMM) and without proper dirty bits set, which results in the CPU reusing stale IDTR pointer which leads to a guest shutdown on any interrupt. On the real hardware this usually doesn't happen, but when running nested, L0's KVM does check and honour few dirty bits, causing this issue to happen. This patch fixes boot of hyperv and SMM enabled windows VM running nested on KVM. Signed-off-by: Maxim Levitsky Cc: stable@vger.kernel.org Message-Id: <20220207155447.840194-4-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm/svm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c index 0a1f31e502bbdc..fabbc73c68e253 100644 --- a/arch/x86/kvm/svm/svm.c +++ b/arch/x86/kvm/svm/svm.c @@ -4256,6 +4256,8 @@ static int svm_leave_smm(struct kvm_vcpu *vcpu, const char *smstate) * Enter the nested guest now */ + vmcb_mark_all_dirty(svm->vmcb01.ptr); + vmcb12 = map.hva; nested_copy_vmcb_control_to_cache(svm, &vmcb12->control); nested_copy_vmcb_save_to_cache(svm, &vmcb12->save); From 759cbd59674a6c0aec616a3f4f0740ebd3f5fbef Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Mon, 7 Feb 2022 17:54:21 +0200 Subject: [PATCH 081/493] KVM: x86: nSVM/nVMX: set nested_run_pending on VM entry which is a result of RSM While RSM induced VM entries are not full VM entries, they still need to be followed by actual VM entry to complete it, unlike setting the nested state. This patch fixes boot of hyperv and SMM enabled windows VM running nested on KVM, which fail due to this issue combined with lack of dirty bit setting. Signed-off-by: Maxim Levitsky Cc: stable@vger.kernel.org Message-Id: <20220207155447.840194-5-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm/svm.c | 5 +++++ arch/x86/kvm/vmx/vmx.c | 1 + 2 files changed, 6 insertions(+) diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c index fabbc73c68e253..2ea7985028fe5e 100644 --- a/arch/x86/kvm/svm/svm.c +++ b/arch/x86/kvm/svm/svm.c @@ -4263,6 +4263,11 @@ static int svm_leave_smm(struct kvm_vcpu *vcpu, const char *smstate) nested_copy_vmcb_save_to_cache(svm, &vmcb12->save); ret = enter_svm_guest_mode(vcpu, vmcb12_gpa, vmcb12, false); + if (ret) + goto unmap_save; + + svm->nested.nested_run_pending = 1; + unmap_save: kvm_vcpu_unmap(vcpu, &map_save, true); unmap_map: diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index 6c27bd0c89e1e6..efda5e4d624763 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -7659,6 +7659,7 @@ static int vmx_leave_smm(struct kvm_vcpu *vcpu, const char *smstate) if (ret) return ret; + vmx->nested.nested_run_pending = 1; vmx->nested.smm.guest_mode = false; } return 0; From 91f673b3e1bd99faf46472b5244cb40fdcd01078 Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Mon, 7 Feb 2022 17:54:22 +0200 Subject: [PATCH 082/493] KVM: x86: nSVM: expose clean bit support to the guest KVM already honours few clean bits thus it makes sense to let the nested guest know about it. Note that KVM also doesn't check if the hardware supports clean bits, and therefore nested KVM was already setting clean bits and L0 KVM was already honouring them. Signed-off-by: Maxim Levitsky Message-Id: <20220207155447.840194-6-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm/svm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c index 2ea7985028fe5e..0e3521316d6b44 100644 --- a/arch/x86/kvm/svm/svm.c +++ b/arch/x86/kvm/svm/svm.c @@ -4652,6 +4652,7 @@ static __init void svm_set_cpu_caps(void) /* CPUID 0x80000001 and 0x8000000A (SVM features) */ if (nested) { kvm_cpu_cap_set(X86_FEATURE_SVM); + kvm_cpu_cap_set(X86_FEATURE_VMCBCLEAN); if (nrips) kvm_cpu_cap_set(X86_FEATURE_NRIPS); From 2b0ecccb55310a4b8ad5d59c703cf8c821be6260 Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Mon, 7 Feb 2022 17:54:24 +0200 Subject: [PATCH 083/493] KVM: x86: nSVM: deal with L1 hypervisor that intercepts interrupts but lets L2 control them Fix a corner case in which the L1 hypervisor intercepts interrupts (INTERCEPT_INTR) and either doesn't set virtual interrupt masking (V_INTR_MASKING) or enters a nested guest with EFLAGS.IF disabled prior to the entry. In this case, despite the fact that L1 intercepts the interrupts, KVM still needs to set up an interrupt window to wait before injecting the INTR vmexit. Currently the KVM instead enters an endless loop of 'req_immediate_exit'. Exactly the same issue also happens for SMIs and NMI. Fix this as well. Note that on VMX, this case is impossible as there is only 'vmexit on external interrupts' execution control which either set, in which case both host and guest's EFLAGS.IF are ignored, or not set, in which case no VMexits are delivered. Signed-off-by: Maxim Levitsky Message-Id: <20220207155447.840194-8-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm/svm.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c index 0e3521316d6b44..52e4130110f3f8 100644 --- a/arch/x86/kvm/svm/svm.c +++ b/arch/x86/kvm/svm/svm.c @@ -3361,11 +3361,13 @@ static int svm_nmi_allowed(struct kvm_vcpu *vcpu, bool for_injection) if (svm->nested.nested_run_pending) return -EBUSY; + if (svm_nmi_blocked(vcpu)) + return 0; + /* An NMI must not be injected into L2 if it's supposed to VM-Exit. */ if (for_injection && is_guest_mode(vcpu) && nested_exit_on_nmi(svm)) return -EBUSY; - - return !svm_nmi_blocked(vcpu); + return 1; } static bool svm_get_nmi_mask(struct kvm_vcpu *vcpu) @@ -3417,9 +3419,13 @@ bool svm_interrupt_blocked(struct kvm_vcpu *vcpu) static int svm_interrupt_allowed(struct kvm_vcpu *vcpu, bool for_injection) { struct vcpu_svm *svm = to_svm(vcpu); + if (svm->nested.nested_run_pending) return -EBUSY; + if (svm_interrupt_blocked(vcpu)) + return 0; + /* * An IRQ must not be injected into L2 if it's supposed to VM-Exit, * e.g. if the IRQ arrived asynchronously after checking nested events. @@ -3427,7 +3433,7 @@ static int svm_interrupt_allowed(struct kvm_vcpu *vcpu, bool for_injection) if (for_injection && is_guest_mode(vcpu) && nested_exit_on_intr(svm)) return -EBUSY; - return !svm_interrupt_blocked(vcpu); + return 1; } static void svm_enable_irq_window(struct kvm_vcpu *vcpu) @@ -4158,11 +4164,14 @@ static int svm_smi_allowed(struct kvm_vcpu *vcpu, bool for_injection) if (svm->nested.nested_run_pending) return -EBUSY; + if (svm_smi_blocked(vcpu)) + return 0; + /* An SMI must not be injected into L2 if it's supposed to VM-Exit. */ if (for_injection && is_guest_mode(vcpu) && nested_exit_on_smi(svm)) return -EBUSY; - return !svm_smi_blocked(vcpu); + return 1; } static int svm_enter_smm(struct kvm_vcpu *vcpu, char *smstate) From 755c2bf878607dbddb1423df9abf16b82205896f Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Mon, 7 Feb 2022 17:54:25 +0200 Subject: [PATCH 084/493] KVM: x86: lapic: don't touch irr_pending in kvm_apic_update_apicv when inhibiting it kvm_apic_update_apicv is called when AVIC is still active, thus IRR bits can be set by the CPU after it is called, and don't cause the irr_pending to be set to true. Also logic in avic_kick_target_vcpu doesn't expect a race with this function so to make it simple, just keep irr_pending set to true and let the next interrupt injection to the guest clear it. Signed-off-by: Maxim Levitsky Message-Id: <20220207155447.840194-9-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/lapic.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index d7e6fde82d2544..9322e6340a742b 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -2306,7 +2306,12 @@ void kvm_apic_update_apicv(struct kvm_vcpu *vcpu) apic->irr_pending = true; apic->isr_count = 1; } else { - apic->irr_pending = (apic_search_irr(apic) != -1); + /* + * Don't clear irr_pending, searching the IRR can race with + * updates from the CPU as APICv is still active from hardware's + * perspective. The flag will be cleared as appropriate when + * KVM injects the interrupt. + */ apic->isr_count = count_vectors(apic->regs + APIC_ISR); } } From 3915035282573c5e29996ce3173171f5f05234d1 Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Mon, 7 Feb 2022 17:54:26 +0200 Subject: [PATCH 085/493] KVM: x86: SVM: move avic definitions from AMD's spec to svm.h asm/svm.h is the correct place for all values that are defined in the SVM spec, and that includes AVIC. Also add some values from the spec that were not defined before and will be soon useful. Signed-off-by: Maxim Levitsky Message-Id: <20220207155447.840194-10-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini --- arch/x86/include/asm/msr-index.h | 1 + arch/x86/include/asm/svm.h | 36 ++++++++++++++++++++++++++++++++ arch/x86/kvm/svm/avic.c | 22 +------------------ arch/x86/kvm/svm/svm.h | 11 ---------- 4 files changed, 38 insertions(+), 32 deletions(-) diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h index 3faf0f97edb1bc..a4a39c3e0f1967 100644 --- a/arch/x86/include/asm/msr-index.h +++ b/arch/x86/include/asm/msr-index.h @@ -476,6 +476,7 @@ #define MSR_AMD64_ICIBSEXTDCTL 0xc001103c #define MSR_AMD64_IBSOPDATA4 0xc001103d #define MSR_AMD64_IBS_REG_COUNT_MAX 8 /* includes MSR_AMD64_IBSBRTARGET */ +#define MSR_AMD64_SVM_AVIC_DOORBELL 0xc001011b #define MSR_AMD64_VM_PAGE_FLUSH 0xc001011e #define MSR_AMD64_SEV_ES_GHCB 0xc0010130 #define MSR_AMD64_SEV 0xc0010131 diff --git a/arch/x86/include/asm/svm.h b/arch/x86/include/asm/svm.h index b00dbc5fac2b2a..bb2fb78523cee8 100644 --- a/arch/x86/include/asm/svm.h +++ b/arch/x86/include/asm/svm.h @@ -220,6 +220,42 @@ struct __attribute__ ((__packed__)) vmcb_control_area { #define SVM_NESTED_CTL_SEV_ENABLE BIT(1) #define SVM_NESTED_CTL_SEV_ES_ENABLE BIT(2) + +/* AVIC */ +#define AVIC_LOGICAL_ID_ENTRY_GUEST_PHYSICAL_ID_MASK (0xFF) +#define AVIC_LOGICAL_ID_ENTRY_VALID_BIT 31 +#define AVIC_LOGICAL_ID_ENTRY_VALID_MASK (1 << 31) + +#define AVIC_PHYSICAL_ID_ENTRY_HOST_PHYSICAL_ID_MASK (0xFFULL) +#define AVIC_PHYSICAL_ID_ENTRY_BACKING_PAGE_MASK (0xFFFFFFFFFFULL << 12) +#define AVIC_PHYSICAL_ID_ENTRY_IS_RUNNING_MASK (1ULL << 62) +#define AVIC_PHYSICAL_ID_ENTRY_VALID_MASK (1ULL << 63) +#define AVIC_PHYSICAL_ID_TABLE_SIZE_MASK (0xFF) + +#define AVIC_DOORBELL_PHYSICAL_ID_MASK (0xFF) + +#define AVIC_UNACCEL_ACCESS_WRITE_MASK 1 +#define AVIC_UNACCEL_ACCESS_OFFSET_MASK 0xFF0 +#define AVIC_UNACCEL_ACCESS_VECTOR_MASK 0xFFFFFFFF + +enum avic_ipi_failure_cause { + AVIC_IPI_FAILURE_INVALID_INT_TYPE, + AVIC_IPI_FAILURE_TARGET_NOT_RUNNING, + AVIC_IPI_FAILURE_INVALID_TARGET, + AVIC_IPI_FAILURE_INVALID_BACKING_PAGE, +}; + + +/* + * 0xff is broadcast, so the max index allowed for physical APIC ID + * table is 0xfe. APIC IDs above 0xff are reserved. + */ +#define AVIC_MAX_PHYSICAL_ID_COUNT 0xff + +#define AVIC_HPA_MASK ~((0xFFFULL << 52) | 0xFFF) +#define VMCB_AVIC_APIC_BAR_MASK 0xFFFFFFFFFF000ULL + + struct vmcb_seg { u16 selector; u16 attrib; diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c index ecc81c48c0cae5..3f9b48732aea68 100644 --- a/arch/x86/kvm/svm/avic.c +++ b/arch/x86/kvm/svm/avic.c @@ -27,20 +27,6 @@ #include "irq.h" #include "svm.h" -#define SVM_AVIC_DOORBELL 0xc001011b - -#define AVIC_HPA_MASK ~((0xFFFULL << 52) | 0xFFF) - -/* - * 0xff is broadcast, so the max index allowed for physical APIC ID - * table is 0xfe. APIC IDs above 0xff are reserved. - */ -#define AVIC_MAX_PHYSICAL_ID_COUNT 255 - -#define AVIC_UNACCEL_ACCESS_WRITE_MASK 1 -#define AVIC_UNACCEL_ACCESS_OFFSET_MASK 0xFF0 -#define AVIC_UNACCEL_ACCESS_VECTOR_MASK 0xFFFFFFFF - /* AVIC GATAG is encoded using VM and VCPU IDs */ #define AVIC_VCPU_ID_BITS 8 #define AVIC_VCPU_ID_MASK ((1 << AVIC_VCPU_ID_BITS) - 1) @@ -73,12 +59,6 @@ struct amd_svm_iommu_ir { void *data; /* Storing pointer to struct amd_ir_data */ }; -enum avic_ipi_failure_cause { - AVIC_IPI_FAILURE_INVALID_INT_TYPE, - AVIC_IPI_FAILURE_TARGET_NOT_RUNNING, - AVIC_IPI_FAILURE_INVALID_TARGET, - AVIC_IPI_FAILURE_INVALID_BACKING_PAGE, -}; /* Note: * This function is called from IOMMU driver to notify @@ -700,7 +680,7 @@ int svm_deliver_avic_intr(struct kvm_vcpu *vcpu, int vec) * one is harmless). */ if (cpu != get_cpu()) - wrmsrl(SVM_AVIC_DOORBELL, kvm_cpu_get_apicid(cpu)); + wrmsrl(MSR_AMD64_SVM_AVIC_DOORBELL, kvm_cpu_get_apicid(cpu)); put_cpu(); } else { /* diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h index 73525353e4247b..8cc45f27fcbd1b 100644 --- a/arch/x86/kvm/svm/svm.h +++ b/arch/x86/kvm/svm/svm.h @@ -556,17 +556,6 @@ extern struct kvm_x86_nested_ops svm_nested_ops; /* avic.c */ -#define AVIC_LOGICAL_ID_ENTRY_GUEST_PHYSICAL_ID_MASK (0xFF) -#define AVIC_LOGICAL_ID_ENTRY_VALID_BIT 31 -#define AVIC_LOGICAL_ID_ENTRY_VALID_MASK (1 << 31) - -#define AVIC_PHYSICAL_ID_ENTRY_HOST_PHYSICAL_ID_MASK (0xFFULL) -#define AVIC_PHYSICAL_ID_ENTRY_BACKING_PAGE_MASK (0xFFFFFFFFFFULL << 12) -#define AVIC_PHYSICAL_ID_ENTRY_IS_RUNNING_MASK (1ULL << 62) -#define AVIC_PHYSICAL_ID_ENTRY_VALID_MASK (1ULL << 63) - -#define VMCB_AVIC_APIC_BAR_MASK 0xFFFFFFFFFF000ULL - int avic_ga_log_notifier(u32 ga_tag); void avic_vm_destroy(struct kvm *kvm); int avic_vm_init(struct kvm *kvm); From 37ef4c19b4c659926ce65a7ac709ceaefb211c40 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jos=C3=A9=20Exp=C3=B3sito?= Date: Tue, 8 Feb 2022 09:59:16 -0800 Subject: [PATCH 086/493] Input: clear BTN_RIGHT/MIDDLE on buttonpads MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Buttonpads are expected to map the INPUT_PROP_BUTTONPAD property bit and the BTN_LEFT key bit. As explained in the specification, where a device has a button type value of 0 (click-pad) or 1 (pressure-pad) there should not be discrete buttons: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/touchpad-windows-precision-touchpad-collection#device-capabilities-feature-report However, some drivers map the BTN_RIGHT and/or BTN_MIDDLE key bits even though the device is a buttonpad and therefore does not have those buttons. This behavior has forced userspace applications like libinput to implement different workarounds and quirks to detect buttonpads and offer to the user the right set of features and configuration options. For more information: https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/726 In order to avoid this issue clear the BTN_RIGHT and BTN_MIDDLE key bits when the input device is register if the INPUT_PROP_BUTTONPAD property bit is set. Notice that this change will not affect udev because it does not check for buttons. See systemd/src/udev/udev-builtin-input_id.c. List of known affected hardware: - Chuwi AeroBook Plus - Chuwi Gemibook - Framework Laptop - GPD Win Max - Huawei MateBook 2020 - Prestigio Smartbook 141 C2 - Purism Librem 14v1 - StarLite Mk II - AMI firmware - StarLite Mk II - Coreboot firmware - StarLite Mk III - AMI firmware - StarLite Mk III - Coreboot firmware - StarLabTop Mk IV - AMI firmware - StarLabTop Mk IV - Coreboot firmware - StarBook Mk V Acked-by: Peter Hutterer Acked-by: Benjamin Tissoires Acked-by: Jiri Kosina Signed-off-by: José Expósito Link: https://lore.kernel.org/r/20220208174806.17183-1-jose.exposito89@gmail.com Signed-off-by: Dmitry Torokhov --- drivers/input/input.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/input/input.c b/drivers/input/input.c index ccaeb24263854d..c3139bc2aa0db1 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -2285,6 +2285,12 @@ int input_register_device(struct input_dev *dev) /* KEY_RESERVED is not supposed to be transmitted to userspace. */ __clear_bit(KEY_RESERVED, dev->keybit); + /* Buttonpads should not map BTN_RIGHT and/or BTN_MIDDLE. */ + if (test_bit(INPUT_PROP_BUTTONPAD, dev->propbit)) { + __clear_bit(BTN_RIGHT, dev->keybit); + __clear_bit(BTN_MIDDLE, dev->keybit); + } + /* Make sure that bitmasks not mentioned in dev->evbit are clean. */ input_cleanse_bitmasks(dev); From 4f774c4a65bf3987d1a95c966e884f38c8a942af Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Thu, 27 Jan 2022 19:25:53 -0800 Subject: [PATCH 087/493] cpufreq: Reintroduce ready() callback This effectively revert '4bf8e582119e ("cpufreq: Remove ready() callback")', in order to reintroduce the ready callback. This is needed in order to be able to leave the thermal pressure interrupts in the Qualcomm CPUfreq driver disabled during initialization, so that it doesn't fire while related_cpus are still 0. Signed-off-by: Bjorn Andersson [ Viresh: Added the Chinese translation as well and updated commit msg ] Signed-off-by: Viresh Kumar --- Documentation/cpu-freq/cpu-drivers.rst | 3 +++ Documentation/translations/zh_CN/cpu-freq/cpu-drivers.rst | 2 ++ drivers/cpufreq/cpufreq.c | 4 ++++ include/linux/cpufreq.h | 3 +++ 4 files changed, 12 insertions(+) diff --git a/Documentation/cpu-freq/cpu-drivers.rst b/Documentation/cpu-freq/cpu-drivers.rst index 3b32336a7803eb..d84ededb66f92a 100644 --- a/Documentation/cpu-freq/cpu-drivers.rst +++ b/Documentation/cpu-freq/cpu-drivers.rst @@ -75,6 +75,9 @@ And optionally .resume - A pointer to a per-policy resume function which is called with interrupts disabled and _before_ the governor is started again. + .ready - A pointer to a per-policy ready function which is called after + the policy is fully initialized. + .attr - A pointer to a NULL-terminated list of "struct freq_attr" which allow to export values to sysfs. diff --git a/Documentation/translations/zh_CN/cpu-freq/cpu-drivers.rst b/Documentation/translations/zh_CN/cpu-freq/cpu-drivers.rst index 87a36044f828c9..2ca92042767be4 100644 --- a/Documentation/translations/zh_CN/cpu-freq/cpu-drivers.rst +++ b/Documentation/translations/zh_CN/cpu-freq/cpu-drivers.rst @@ -84,6 +84,8 @@ CPUfreq核心层注册一个cpufreq_driver结构体。 .resume - 一个指向per-policy恢复函数的指针,该函数在关中断且在调节器再一次启动前被 调用。 + .ready - 一个指向per-policy准备函数的指针,该函数在策略完全初始化之后被调用。 + .attr - 一个指向NULL结尾的"struct freq_attr"列表的指针,该列表允许导出值到 sysfs。 diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index b8d95536ee22e8..80f535cc8a757f 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -1518,6 +1518,10 @@ static int cpufreq_online(unsigned int cpu) kobject_uevent(&policy->kobj, KOBJ_ADD); + /* Callback for handling stuff after policy is ready */ + if (cpufreq_driver->ready) + cpufreq_driver->ready(policy); + if (cpufreq_thermal_control_enabled(cpufreq_driver)) policy->cdev = of_cpufreq_cooling_register(policy); diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 1ab29e61b078ed..3522a272b74dde 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -382,6 +382,9 @@ struct cpufreq_driver { int (*suspend)(struct cpufreq_policy *policy); int (*resume)(struct cpufreq_policy *policy); + /* Will be called after the driver is fully initialized */ + void (*ready)(struct cpufreq_policy *policy); + struct freq_attr **attr; /* platform specific boost support code */ From ef8ee1cb8fc8976a68f5e89cd5f7b6f7de80c66f Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Thu, 27 Jan 2022 19:25:54 -0800 Subject: [PATCH 088/493] cpufreq: qcom-hw: Delay enabling throttle_irq In the event that the SoC is under thermal pressure while booting it's possible for the dcvs notification to happen inbetween the cpufreq framework calling init and it actually updating the policy's related_cpus cpumask. Prior to the introduction of the thermal pressure update helper an empty cpumask would simply result in the thermal pressure of no cpus being updated, but the new code will attempt to dereference an invalid per_cpu variable. Avoid this problem by using the newly reintroduced "ready" callback, to postpone enabling the IRQ until the related_cpus cpumask is filled in. Fixes: 0258cb19c77d ("cpufreq: qcom-cpufreq-hw: Use new thermal pressure update function") Signed-off-by: Bjorn Andersson Signed-off-by: Viresh Kumar --- drivers/cpufreq/qcom-cpufreq-hw.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c index 05f3d7876e448d..effbb680b453f2 100644 --- a/drivers/cpufreq/qcom-cpufreq-hw.c +++ b/drivers/cpufreq/qcom-cpufreq-hw.c @@ -388,7 +388,7 @@ static int qcom_cpufreq_hw_lmh_init(struct cpufreq_policy *policy, int index) snprintf(data->irq_name, sizeof(data->irq_name), "dcvsh-irq-%u", policy->cpu); ret = request_threaded_irq(data->throttle_irq, NULL, qcom_lmh_dcvs_handle_irq, - IRQF_ONESHOT, data->irq_name, data); + IRQF_ONESHOT | IRQF_NO_AUTOEN, data->irq_name, data); if (ret) { dev_err(&pdev->dev, "Error registering %s: %d\n", data->irq_name, ret); return 0; @@ -542,6 +542,14 @@ static int qcom_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy) return 0; } +static void qcom_cpufreq_ready(struct cpufreq_policy *policy) +{ + struct qcom_cpufreq_data *data = policy->driver_data; + + if (data->throttle_irq >= 0) + enable_irq(data->throttle_irq); +} + static struct freq_attr *qcom_cpufreq_hw_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, &cpufreq_freq_attr_scaling_boost_freqs, @@ -561,6 +569,7 @@ static struct cpufreq_driver cpufreq_qcom_hw_driver = { .fast_switch = qcom_cpufreq_hw_fast_switch, .name = "qcom-cpufreq-hw", .attr = qcom_cpufreq_hw_attr, + .ready = qcom_cpufreq_ready, }; static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev) From 7152303cbec4f7c2c4db1fb646b549ffd4069b7c Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 4 Feb 2022 14:02:33 +0100 Subject: [PATCH 089/493] selftests: netfilter: add synproxy test Simple test for synproxy feature, iperf3 should be intercepted by synproxy netns, but connection should still succeed. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- tools/testing/selftests/netfilter/Makefile | 2 +- .../selftests/netfilter/nft_synproxy.sh | 115 ++++++++++++++++++ 2 files changed, 116 insertions(+), 1 deletion(-) create mode 100755 tools/testing/selftests/netfilter/nft_synproxy.sh diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile index ffca314897c4c6..e4f845dd942b3f 100644 --- a/tools/testing/selftests/netfilter/Makefile +++ b/tools/testing/selftests/netfilter/Makefile @@ -6,7 +6,7 @@ TEST_PROGS := nft_trans_stress.sh nft_fib.sh nft_nat.sh bridge_brouter.sh \ nft_concat_range.sh nft_conntrack_helper.sh \ nft_queue.sh nft_meta.sh nf_nat_edemux.sh \ ipip-conntrack-mtu.sh conntrack_tcp_unreplied.sh \ - conntrack_vrf.sh + conntrack_vrf.sh nft_synproxy.sh LDLIBS = -lmnl TEST_GEN_FILES = nf-queue diff --git a/tools/testing/selftests/netfilter/nft_synproxy.sh b/tools/testing/selftests/netfilter/nft_synproxy.sh new file mode 100755 index 00000000000000..09bb95c871989e --- /dev/null +++ b/tools/testing/selftests/netfilter/nft_synproxy.sh @@ -0,0 +1,115 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 +ret=0 + +rnd=$(mktemp -u XXXXXXXX) +nsr="nsr-$rnd" # synproxy machine +ns1="ns1-$rnd" # iperf client +ns2="ns2-$rnd" # iperf server + +checktool (){ + if ! $1 > /dev/null 2>&1; then + echo "SKIP: Could not $2" + exit $ksft_skip + fi +} + +checktool "nft --version" "run test without nft tool" +checktool "ip -Version" "run test without ip tool" +checktool "iperf3 --version" "run test without iperf3" +checktool "ip netns add $nsr" "create net namespace" + +ip netns add $ns1 +ip netns add $ns2 + +cleanup() { + ip netns pids $ns1 | xargs kill 2>/dev/null + ip netns pids $ns2 | xargs kill 2>/dev/null + ip netns del $ns1 + ip netns del $ns2 + + ip netns del $nsr +} + +trap cleanup EXIT + +ip link add veth0 netns $nsr type veth peer name eth0 netns $ns1 +ip link add veth1 netns $nsr type veth peer name eth0 netns $ns2 + +for dev in lo veth0 veth1; do +ip -net $nsr link set $dev up +done + +ip -net $nsr addr add 10.0.1.1/24 dev veth0 +ip -net $nsr addr add 10.0.2.1/24 dev veth1 + +ip netns exec $nsr sysctl -q net.ipv4.conf.veth0.forwarding=1 +ip netns exec $nsr sysctl -q net.ipv4.conf.veth1.forwarding=1 +ip netns exec $nsr sysctl -q net.netfilter.nf_conntrack_tcp_loose=0 + +for n in $ns1 $ns2; do + ip -net $n link set lo up + ip -net $n link set eth0 up +done +ip -net $ns1 addr add 10.0.1.99/24 dev eth0 +ip -net $ns2 addr add 10.0.2.99/24 dev eth0 +ip -net $ns1 route add default via 10.0.1.1 +ip -net $ns2 route add default via 10.0.2.1 + +# test basic connectivity +if ! ip netns exec $ns1 ping -c 1 -q 10.0.2.99 > /dev/null; then + echo "ERROR: $ns1 cannot reach $ns2" 1>&2 + exit 1 +fi + +if ! ip netns exec $ns2 ping -c 1 -q 10.0.1.99 > /dev/null; then + echo "ERROR: $ns2 cannot reach $ns1" 1>&2 + exit 1 +fi + +ip netns exec $ns2 iperf3 -s > /dev/null 2>&1 & +# ip netns exec $nsr tcpdump -vvv -n -i veth1 tcp | head -n 10 & + +sleep 1 + +ip netns exec $nsr nft -f - < /dev/null + +if [ $? -ne 0 ]; then + echo "FAIL: iperf3 returned an error" 1>&2 + ret=$? + ip netns exec $nsr nft list ruleset +else + echo "PASS: synproxy connection successful" +fi + +exit $ret From 75063c9294fb239bbe64eb72141b6871fe526d29 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 8 Feb 2022 18:30:43 -0800 Subject: [PATCH 090/493] netfilter: xt_socket: fix a typo in socket_mt_destroy() Calling nf_defrag_ipv4_disable() instead of nf_defrag_ipv6_disable() was probably not the intent. I found this by code inspection, while chasing a possible issue in TPROXY. Fixes: de8c12110a13 ("netfilter: disable defrag once its no longer needed") Signed-off-by: Eric Dumazet Reviewed-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/xt_socket.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/xt_socket.c b/net/netfilter/xt_socket.c index 5e6459e1160553..662e5eb1cc39e5 100644 --- a/net/netfilter/xt_socket.c +++ b/net/netfilter/xt_socket.c @@ -221,7 +221,7 @@ static void socket_mt_destroy(const struct xt_mtdtor_param *par) if (par->family == NFPROTO_IPV4) nf_defrag_ipv4_disable(par->net); else if (par->family == NFPROTO_IPV6) - nf_defrag_ipv4_disable(par->net); + nf_defrag_ipv6_disable(par->net); } static struct xt_match socket_mt_reg[] __read_mostly = { From 2e71ec1a725a794a16e3862791ed43fe5ba6a06b Mon Sep 17 00:00:00 2001 From: Hangbin Liu Date: Wed, 9 Feb 2022 16:25:51 +0800 Subject: [PATCH 091/493] selftests: netfilter: fix exit value for nft_concat_range When the nft_concat_range test failed, it exit 1 in the code specifically. But when part of, or all of the test passed, it will failed the [ ${passed} -eq 0 ] check and thus exit with 1, which is the same exit value with failure result. Fix it by exit 0 when passed is not 0. Fixes: 611973c1e06f ("selftests: netfilter: Introduce tests for sets with range concatenation") Signed-off-by: Hangbin Liu Reviewed-by: Stefano Brivio Signed-off-by: Pablo Neira Ayuso --- tools/testing/selftests/netfilter/nft_concat_range.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/netfilter/nft_concat_range.sh b/tools/testing/selftests/netfilter/nft_concat_range.sh index df322e47a54fb8..b35010cc7f6ae0 100755 --- a/tools/testing/selftests/netfilter/nft_concat_range.sh +++ b/tools/testing/selftests/netfilter/nft_concat_range.sh @@ -1601,4 +1601,4 @@ for name in ${TESTS}; do done done -[ ${passed} -eq 0 ] && exit ${KSELFTEST_SKIP} +[ ${passed} -eq 0 ] && exit ${KSELFTEST_SKIP} || exit 0 From ffc58bc4af9365d4eea72526bb3cf6a83615c673 Mon Sep 17 00:00:00 2001 From: Cai Huoqing Date: Wed, 9 Feb 2022 11:22:51 +0800 Subject: [PATCH 092/493] Drivers: hv: utils: Make use of the helper macro LIST_HEAD() Replace "struct list_head head = LIST_HEAD_INIT(head)" with "LIST_HEAD(head)" to simplify the code. Signed-off-by: Cai Huoqing Link: https://lore.kernel.org/r/20220209032251.37362-1-cai.huoqing@linux.dev Signed-off-by: Wei Liu --- drivers/hv/hv_utils_transport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hv/hv_utils_transport.c b/drivers/hv/hv_utils_transport.c index eb2833d2b5d0a4..8328851986430f 100644 --- a/drivers/hv/hv_utils_transport.c +++ b/drivers/hv/hv_utils_transport.c @@ -13,7 +13,7 @@ #include "hv_utils_transport.h" static DEFINE_SPINLOCK(hvt_list_lock); -static struct list_head hvt_list = LIST_HEAD_INIT(hvt_list); +static LIST_HEAD(hvt_list); static void hvt_reset(struct hvutil_transport *hvt) { From e4e3a93c6e267572ca2345d8d86053e166843a8c Mon Sep 17 00:00:00 2001 From: Tzung-Bi Shih Date: Tue, 8 Feb 2022 11:12:42 +0800 Subject: [PATCH 093/493] MAINTAINERS: update cros_ec_codec maintainers Updates cros_ec_codec maintainers. Signed-off-by: Tzung-Bi Shih Acked-By: Cheng-Yi Chiang Acked-By: Benson Leung Link: https://lore.kernel.org/r/20220208031242.227563-1-tzungbi@google.com Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/google,cros-ec-codec.yaml | 1 + MAINTAINERS | 1 + 2 files changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml index 77adbebed82422..c3e9f3485449e3 100644 --- a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml +++ b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml @@ -8,6 +8,7 @@ title: Audio codec controlled by ChromeOS EC maintainers: - Cheng-Yi Chiang + - Tzung-Bi Shih description: | Google's ChromeOS EC codec is a digital mic codec provided by the diff --git a/MAINTAINERS b/MAINTAINERS index 09734251e1de96..9256c3540a0ff5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4476,6 +4476,7 @@ F: drivers/platform/chrome/ CHROMEOS EC CODEC DRIVER M: Cheng-Yi Chiang +M: Tzung-Bi Shih R: Guenter Roeck S: Maintained F: Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml From 647474b8d980256b26b1cd112d7333a4dbd4260a Mon Sep 17 00:00:00 2001 From: AngeloGioacchino Del Regno Date: Mon, 31 Jan 2022 09:55:20 +0100 Subject: [PATCH 094/493] drm/mediatek: mtk_dsi: Avoid EPROBE_DEFER loop with external bridge MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit DRM bridge drivers are now attaching their DSI device at probe time, which requires us to register our DSI host in order to let the bridge to probe: this recently started producing an endless -EPROBE_DEFER loop on some machines that are using external bridges, like the parade-ps8640, found on the ACER Chromebook R13. Now that the DSI hosts/devices probe sequence is documented, we can do adjustments to the mtk_dsi driver as to both fix now and make sure to avoid this situation in the future: for this, following what is documented in drm_bridge.c, move the mtk_dsi component_add() to the mtk_dsi_ops.attach callback and delete it in the detach callback; keeping in mind that we are registering a drm_bridge for our DSI, which is only used/attached if the DSI Host is bound, it wouldn't make sense to keep adding our bridge at probe time (as it would be useless to have it if mtk_dsi_ops.attach() fails!), so also move that one to the dsi host attach function (and remove it in detach). Cc: # 5.15.x Signed-off-by: AngeloGioacchino Del Regno Reviewed-by: Andrzej Hajda Reviewed-by: Jagan Teki Tested-by: Nícolas F. R. A. Prado Signed-off-by: Chun-Kuang Hu --- drivers/gpu/drm/mediatek/mtk_dsi.c | 167 +++++++++++++++-------------- 1 file changed, 84 insertions(+), 83 deletions(-) diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c index 5d90d2eb001935..bced4c7d668e38 100644 --- a/drivers/gpu/drm/mediatek/mtk_dsi.c +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c @@ -786,18 +786,101 @@ void mtk_dsi_ddp_stop(struct device *dev) mtk_dsi_poweroff(dsi); } +static int mtk_dsi_encoder_init(struct drm_device *drm, struct mtk_dsi *dsi) +{ + int ret; + + ret = drm_simple_encoder_init(drm, &dsi->encoder, + DRM_MODE_ENCODER_DSI); + if (ret) { + DRM_ERROR("Failed to encoder init to drm\n"); + return ret; + } + + dsi->encoder.possible_crtcs = mtk_drm_find_possible_crtc_by_comp(drm, dsi->host.dev); + + ret = drm_bridge_attach(&dsi->encoder, &dsi->bridge, NULL, + DRM_BRIDGE_ATTACH_NO_CONNECTOR); + if (ret) + goto err_cleanup_encoder; + + dsi->connector = drm_bridge_connector_init(drm, &dsi->encoder); + if (IS_ERR(dsi->connector)) { + DRM_ERROR("Unable to create bridge connector\n"); + ret = PTR_ERR(dsi->connector); + goto err_cleanup_encoder; + } + drm_connector_attach_encoder(dsi->connector, &dsi->encoder); + + return 0; + +err_cleanup_encoder: + drm_encoder_cleanup(&dsi->encoder); + return ret; +} + +static int mtk_dsi_bind(struct device *dev, struct device *master, void *data) +{ + int ret; + struct drm_device *drm = data; + struct mtk_dsi *dsi = dev_get_drvdata(dev); + + ret = mtk_dsi_encoder_init(drm, dsi); + if (ret) + return ret; + + return device_reset_optional(dev); +} + +static void mtk_dsi_unbind(struct device *dev, struct device *master, + void *data) +{ + struct mtk_dsi *dsi = dev_get_drvdata(dev); + + drm_encoder_cleanup(&dsi->encoder); +} + +static const struct component_ops mtk_dsi_component_ops = { + .bind = mtk_dsi_bind, + .unbind = mtk_dsi_unbind, +}; + static int mtk_dsi_host_attach(struct mipi_dsi_host *host, struct mipi_dsi_device *device) { struct mtk_dsi *dsi = host_to_dsi(host); + struct device *dev = host->dev; + int ret; dsi->lanes = device->lanes; dsi->format = device->format; dsi->mode_flags = device->mode_flags; + dsi->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 0, 0); + if (IS_ERR(dsi->next_bridge)) + return PTR_ERR(dsi->next_bridge); + + drm_bridge_add(&dsi->bridge); + + ret = component_add(host->dev, &mtk_dsi_component_ops); + if (ret) { + DRM_ERROR("failed to add dsi_host component: %d\n", ret); + drm_bridge_remove(&dsi->bridge); + return ret; + } return 0; } +static int mtk_dsi_host_detach(struct mipi_dsi_host *host, + struct mipi_dsi_device *device) +{ + struct mtk_dsi *dsi = host_to_dsi(host); + + component_del(host->dev, &mtk_dsi_component_ops); + drm_bridge_remove(&dsi->bridge); + return 0; +} + static void mtk_dsi_wait_for_idle(struct mtk_dsi *dsi) { int ret; @@ -938,73 +1021,14 @@ static ssize_t mtk_dsi_host_transfer(struct mipi_dsi_host *host, static const struct mipi_dsi_host_ops mtk_dsi_ops = { .attach = mtk_dsi_host_attach, + .detach = mtk_dsi_host_detach, .transfer = mtk_dsi_host_transfer, }; -static int mtk_dsi_encoder_init(struct drm_device *drm, struct mtk_dsi *dsi) -{ - int ret; - - ret = drm_simple_encoder_init(drm, &dsi->encoder, - DRM_MODE_ENCODER_DSI); - if (ret) { - DRM_ERROR("Failed to encoder init to drm\n"); - return ret; - } - - dsi->encoder.possible_crtcs = mtk_drm_find_possible_crtc_by_comp(drm, dsi->host.dev); - - ret = drm_bridge_attach(&dsi->encoder, &dsi->bridge, NULL, - DRM_BRIDGE_ATTACH_NO_CONNECTOR); - if (ret) - goto err_cleanup_encoder; - - dsi->connector = drm_bridge_connector_init(drm, &dsi->encoder); - if (IS_ERR(dsi->connector)) { - DRM_ERROR("Unable to create bridge connector\n"); - ret = PTR_ERR(dsi->connector); - goto err_cleanup_encoder; - } - drm_connector_attach_encoder(dsi->connector, &dsi->encoder); - - return 0; - -err_cleanup_encoder: - drm_encoder_cleanup(&dsi->encoder); - return ret; -} - -static int mtk_dsi_bind(struct device *dev, struct device *master, void *data) -{ - int ret; - struct drm_device *drm = data; - struct mtk_dsi *dsi = dev_get_drvdata(dev); - - ret = mtk_dsi_encoder_init(drm, dsi); - if (ret) - return ret; - - return device_reset_optional(dev); -} - -static void mtk_dsi_unbind(struct device *dev, struct device *master, - void *data) -{ - struct mtk_dsi *dsi = dev_get_drvdata(dev); - - drm_encoder_cleanup(&dsi->encoder); -} - -static const struct component_ops mtk_dsi_component_ops = { - .bind = mtk_dsi_bind, - .unbind = mtk_dsi_unbind, -}; - static int mtk_dsi_probe(struct platform_device *pdev) { struct mtk_dsi *dsi; struct device *dev = &pdev->dev; - struct drm_panel *panel; struct resource *regs; int irq_num; int ret; @@ -1021,19 +1045,6 @@ static int mtk_dsi_probe(struct platform_device *pdev) return ret; } - ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, - &panel, &dsi->next_bridge); - if (ret) - goto err_unregister_host; - - if (panel) { - dsi->next_bridge = devm_drm_panel_bridge_add(dev, panel); - if (IS_ERR(dsi->next_bridge)) { - ret = PTR_ERR(dsi->next_bridge); - goto err_unregister_host; - } - } - dsi->driver_data = of_device_get_match_data(dev); dsi->engine_clk = devm_clk_get(dev, "engine"); @@ -1098,14 +1109,6 @@ static int mtk_dsi_probe(struct platform_device *pdev) dsi->bridge.of_node = dev->of_node; dsi->bridge.type = DRM_MODE_CONNECTOR_DSI; - drm_bridge_add(&dsi->bridge); - - ret = component_add(&pdev->dev, &mtk_dsi_component_ops); - if (ret) { - dev_err(&pdev->dev, "failed to add component: %d\n", ret); - goto err_unregister_host; - } - return 0; err_unregister_host: @@ -1118,8 +1121,6 @@ static int mtk_dsi_remove(struct platform_device *pdev) struct mtk_dsi *dsi = platform_get_drvdata(pdev); mtk_output_dsi_disable(dsi); - drm_bridge_remove(&dsi->bridge); - component_del(&pdev->dev, &mtk_dsi_component_ops); mipi_dsi_host_unregister(&dsi->host); return 0; From ea0eba69a2a8125229b1b6011644598039bc53aa Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Sun, 30 Jan 2022 20:53:15 +0800 Subject: [PATCH 095/493] btrfs: don't hold CPU for too long when defragging a file There is a user report about "btrfs filesystem defrag" causing 120s timeout problem. For btrfs_defrag_file() it will iterate all file extents if called from defrag ioctl, thus it can take a long time. There is no reason not to release the CPU during such a long operation. Add cond_resched() after defragged one cluster. CC: stable@vger.kernel.org # 5.16 Link: https://lore.kernel.org/linux-btrfs/10e51417-2203-f0a4-2021-86c8511cc367@gmx.com Signed-off-by: Qu Wenruo Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/ioctl.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 925522756e285d..b51c8b783f40a3 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1629,6 +1629,7 @@ int btrfs_defrag_file(struct inode *inode, struct file_ra_state *ra, ret = 0; break; } + cond_resched(); } if (ra_allocated) From 0d1ffa2228cb34f485f8fe927f134b82a0ea62ae Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Tue, 8 Feb 2022 14:54:05 +0800 Subject: [PATCH 096/493] btrfs: defrag: don't try to defrag extents which are under writeback Once we start writeback (have called btrfs_run_delalloc_range()), we allocate an extent, create an extent map point to that extent, with a generation of (u64)-1, created the ordered extent and then clear the DELALLOC bit from the range in the inode's io tree. Such extent map can pass the first call of defrag_collect_targets(), as its generation is (u64)-1, meets any possible minimal generation check. And the range will not have DELALLOC bit, also passing the DELALLOC bit check. It will only be re-checked in the second call of defrag_collect_targets(), which will wait for writeback. But at that stage we have already spent our time waiting for some IO we may or may not want to defrag. Let's reject such extents early so we won't waste our time. CC: stable@vger.kernel.org # 5.16 Reviewed-by: Filipe Manana Signed-off-by: Qu Wenruo Signed-off-by: David Sterba --- fs/btrfs/ioctl.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index b51c8b783f40a3..90136562d8654e 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1210,6 +1210,10 @@ static int defrag_collect_targets(struct btrfs_inode *inode, if (em->generation < newer_than) goto next; + /* This em is under writeback, no need to defrag */ + if (em->generation == (u64)-1) + goto next; + /* * Our start offset might be in the middle of an existing extent * map, so take that into account. From a0f0cf8341e34e5d2265bfd3a7ad68342da1e2aa Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Wed, 2 Feb 2022 15:26:09 +0000 Subject: [PATCH 097/493] btrfs: get rid of warning on transaction commit when using flushoncommit When using the flushoncommit mount option, during almost every transaction commit we trigger a warning from __writeback_inodes_sb_nr(): $ cat fs/fs-writeback.c: (...) static void __writeback_inodes_sb_nr(struct super_block *sb, ... { (...) WARN_ON(!rwsem_is_locked(&sb->s_umount)); (...) } (...) The trace produced in dmesg looks like the following: [947.473890] WARNING: CPU: 5 PID: 930 at fs/fs-writeback.c:2610 __writeback_inodes_sb_nr+0x7e/0xb3 [947.481623] Modules linked in: nfsd nls_cp437 cifs asn1_decoder cifs_arc4 fscache cifs_md4 ipmi_ssif [947.489571] CPU: 5 PID: 930 Comm: btrfs-transacti Not tainted 95.16.3-srb-asrock-00001-g36437ad63879 #186 [947.497969] RIP: 0010:__writeback_inodes_sb_nr+0x7e/0xb3 [947.502097] Code: 24 10 4c 89 44 24 18 c6 (...) [947.519760] RSP: 0018:ffffc90000777e10 EFLAGS: 00010246 [947.523818] RAX: 0000000000000000 RBX: 0000000000963300 RCX: 0000000000000000 [947.529765] RDX: 0000000000000000 RSI: 000000000000fa51 RDI: ffffc90000777e50 [947.535740] RBP: ffff888101628a90 R08: ffff888100955800 R09: ffff888100956000 [947.541701] R10: 0000000000000002 R11: 0000000000000001 R12: ffff888100963488 [947.547645] R13: ffff888100963000 R14: ffff888112fb7200 R15: ffff888100963460 [947.553621] FS: 0000000000000000(0000) GS:ffff88841fd40000(0000) knlGS:0000000000000000 [947.560537] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [947.565122] CR2: 0000000008be50c4 CR3: 000000000220c000 CR4: 00000000001006e0 [947.571072] Call Trace: [947.572354] [947.573266] btrfs_commit_transaction+0x1f1/0x998 [947.576785] ? start_transaction+0x3ab/0x44e [947.579867] ? schedule_timeout+0x8a/0xdd [947.582716] transaction_kthread+0xe9/0x156 [947.585721] ? btrfs_cleanup_transaction.isra.0+0x407/0x407 [947.590104] kthread+0x131/0x139 [947.592168] ? set_kthread_struct+0x32/0x32 [947.595174] ret_from_fork+0x22/0x30 [947.597561] [947.598553] ---[ end trace 644721052755541c ]--- This is because we started using writeback_inodes_sb() to flush delalloc when committing a transaction (when using -o flushoncommit), in order to avoid deadlocks with filesystem freeze operations. This change was made by commit ce8ea7cc6eb313 ("btrfs: don't call btrfs_start_delalloc_roots in flushoncommit"). After that change we started producing that warning, and every now and then a user reports this since the warning happens too often, it spams dmesg/syslog, and a user is unsure if this reflects any problem that might compromise the filesystem's reliability. We can not just lock the sb->s_umount semaphore before calling writeback_inodes_sb(), because that would at least deadlock with filesystem freezing, since at fs/super.c:freeze_super() sync_filesystem() is called while we are holding that semaphore in write mode, and that can trigger a transaction commit, resulting in a deadlock. It would also trigger the same type of deadlock in the unmount path. Possibly, it could also introduce some other locking dependencies that lockdep would report. To fix this call try_to_writeback_inodes_sb() instead of writeback_inodes_sb(), because that will try to read lock sb->s_umount and then will only call writeback_inodes_sb() if it was able to lock it. This is fine because the cases where it can't read lock sb->s_umount are during a filesystem unmount or during a filesystem freeze - in those cases sb->s_umount is write locked and sync_filesystem() is called, which calls writeback_inodes_sb(). In other words, in all cases where we can't take a read lock on sb->s_umount, writeback is already being triggered elsewhere. An alternative would be to call btrfs_start_delalloc_roots() with a number of pages different from LONG_MAX, for example matching the number of delalloc bytes we currently have, in which case we would end up starting all delalloc with filemap_fdatawrite_wbc() and not with an async flush via filemap_flush() - that is only possible after the rather recent commit e076ab2a2ca70a ("btrfs: shrink delalloc pages instead of full inodes"). However that creates a whole new can of worms due to new lock dependencies, which lockdep complains, like for example: [ 8948.247280] ====================================================== [ 8948.247823] WARNING: possible circular locking dependency detected [ 8948.248353] 5.17.0-rc1-btrfs-next-111 #1 Not tainted [ 8948.248786] ------------------------------------------------------ [ 8948.249320] kworker/u16:18/933570 is trying to acquire lock: [ 8948.249812] ffff9b3de1591690 (sb_internal#2){.+.+}-{0:0}, at: find_free_extent+0x141e/0x1590 [btrfs] [ 8948.250638] but task is already holding lock: [ 8948.251140] ffff9b3e09c717d8 (&root->delalloc_mutex){+.+.}-{3:3}, at: start_delalloc_inodes+0x78/0x400 [btrfs] [ 8948.252018] which lock already depends on the new lock. [ 8948.252710] the existing dependency chain (in reverse order) is: [ 8948.253343] -> #2 (&root->delalloc_mutex){+.+.}-{3:3}: [ 8948.253950] __mutex_lock+0x90/0x900 [ 8948.254354] start_delalloc_inodes+0x78/0x400 [btrfs] [ 8948.254859] btrfs_start_delalloc_roots+0x194/0x2a0 [btrfs] [ 8948.255408] btrfs_commit_transaction+0x32f/0xc00 [btrfs] [ 8948.255942] btrfs_mksubvol+0x380/0x570 [btrfs] [ 8948.256406] btrfs_mksnapshot+0x81/0xb0 [btrfs] [ 8948.256870] __btrfs_ioctl_snap_create+0x17f/0x190 [btrfs] [ 8948.257413] btrfs_ioctl_snap_create_v2+0xbb/0x140 [btrfs] [ 8948.257961] btrfs_ioctl+0x1196/0x3630 [btrfs] [ 8948.258418] __x64_sys_ioctl+0x83/0xb0 [ 8948.258793] do_syscall_64+0x3b/0xc0 [ 8948.259146] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 8948.259709] -> #1 (&fs_info->delalloc_root_mutex){+.+.}-{3:3}: [ 8948.260330] __mutex_lock+0x90/0x900 [ 8948.260692] btrfs_start_delalloc_roots+0x97/0x2a0 [btrfs] [ 8948.261234] btrfs_commit_transaction+0x32f/0xc00 [btrfs] [ 8948.261766] btrfs_set_free_space_cache_v1_active+0x38/0x60 [btrfs] [ 8948.262379] btrfs_start_pre_rw_mount+0x119/0x180 [btrfs] [ 8948.262909] open_ctree+0x1511/0x171e [btrfs] [ 8948.263359] btrfs_mount_root.cold+0x12/0xde [btrfs] [ 8948.263863] legacy_get_tree+0x30/0x50 [ 8948.264242] vfs_get_tree+0x28/0xc0 [ 8948.264594] vfs_kern_mount.part.0+0x71/0xb0 [ 8948.265017] btrfs_mount+0x11d/0x3a0 [btrfs] [ 8948.265462] legacy_get_tree+0x30/0x50 [ 8948.265851] vfs_get_tree+0x28/0xc0 [ 8948.266203] path_mount+0x2d4/0xbe0 [ 8948.266554] __x64_sys_mount+0x103/0x140 [ 8948.266940] do_syscall_64+0x3b/0xc0 [ 8948.267300] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 8948.267790] -> #0 (sb_internal#2){.+.+}-{0:0}: [ 8948.268322] __lock_acquire+0x12e8/0x2260 [ 8948.268733] lock_acquire+0xd7/0x310 [ 8948.269092] start_transaction+0x44c/0x6e0 [btrfs] [ 8948.269591] find_free_extent+0x141e/0x1590 [btrfs] [ 8948.270087] btrfs_reserve_extent+0x14b/0x280 [btrfs] [ 8948.270588] cow_file_range+0x17e/0x490 [btrfs] [ 8948.271051] btrfs_run_delalloc_range+0x345/0x7a0 [btrfs] [ 8948.271586] writepage_delalloc+0xb5/0x170 [btrfs] [ 8948.272071] __extent_writepage+0x156/0x3c0 [btrfs] [ 8948.272579] extent_write_cache_pages+0x263/0x460 [btrfs] [ 8948.273113] extent_writepages+0x76/0x130 [btrfs] [ 8948.273573] do_writepages+0xd2/0x1c0 [ 8948.273942] filemap_fdatawrite_wbc+0x68/0x90 [ 8948.274371] start_delalloc_inodes+0x17f/0x400 [btrfs] [ 8948.274876] btrfs_start_delalloc_roots+0x194/0x2a0 [btrfs] [ 8948.275417] flush_space+0x1f2/0x630 [btrfs] [ 8948.275863] btrfs_async_reclaim_data_space+0x108/0x1b0 [btrfs] [ 8948.276438] process_one_work+0x252/0x5a0 [ 8948.276829] worker_thread+0x55/0x3b0 [ 8948.277189] kthread+0xf2/0x120 [ 8948.277506] ret_from_fork+0x22/0x30 [ 8948.277868] other info that might help us debug this: [ 8948.278548] Chain exists of: sb_internal#2 --> &fs_info->delalloc_root_mutex --> &root->delalloc_mutex [ 8948.279601] Possible unsafe locking scenario: [ 8948.280102] CPU0 CPU1 [ 8948.280508] ---- ---- [ 8948.280915] lock(&root->delalloc_mutex); [ 8948.281271] lock(&fs_info->delalloc_root_mutex); [ 8948.281915] lock(&root->delalloc_mutex); [ 8948.282487] lock(sb_internal#2); [ 8948.282800] *** DEADLOCK *** [ 8948.283333] 4 locks held by kworker/u16:18/933570: [ 8948.283750] #0: ffff9b3dc00a9d48 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x1d2/0x5a0 [ 8948.284609] #1: ffffa90349dafe70 ((work_completion)(&fs_info->async_data_reclaim_work)){+.+.}-{0:0}, at: process_one_work+0x1d2/0x5a0 [ 8948.285637] #2: ffff9b3e14db5040 (&fs_info->delalloc_root_mutex){+.+.}-{3:3}, at: btrfs_start_delalloc_roots+0x97/0x2a0 [btrfs] [ 8948.286674] #3: ffff9b3e09c717d8 (&root->delalloc_mutex){+.+.}-{3:3}, at: start_delalloc_inodes+0x78/0x400 [btrfs] [ 8948.287596] stack backtrace: [ 8948.287975] CPU: 3 PID: 933570 Comm: kworker/u16:18 Not tainted 5.17.0-rc1-btrfs-next-111 #1 [ 8948.288677] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 8948.289649] Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs] [ 8948.290298] Call Trace: [ 8948.290517] [ 8948.290700] dump_stack_lvl+0x59/0x73 [ 8948.291026] check_noncircular+0xf3/0x110 [ 8948.291375] ? start_transaction+0x228/0x6e0 [btrfs] [ 8948.291826] __lock_acquire+0x12e8/0x2260 [ 8948.292241] lock_acquire+0xd7/0x310 [ 8948.292714] ? find_free_extent+0x141e/0x1590 [btrfs] [ 8948.293241] ? lock_is_held_type+0xea/0x140 [ 8948.293601] start_transaction+0x44c/0x6e0 [btrfs] [ 8948.294055] ? find_free_extent+0x141e/0x1590 [btrfs] [ 8948.294518] find_free_extent+0x141e/0x1590 [btrfs] [ 8948.294957] ? _raw_spin_unlock+0x29/0x40 [ 8948.295312] ? btrfs_get_alloc_profile+0x124/0x290 [btrfs] [ 8948.295813] btrfs_reserve_extent+0x14b/0x280 [btrfs] [ 8948.296270] cow_file_range+0x17e/0x490 [btrfs] [ 8948.296691] btrfs_run_delalloc_range+0x345/0x7a0 [btrfs] [ 8948.297175] ? find_lock_delalloc_range+0x247/0x270 [btrfs] [ 8948.297678] writepage_delalloc+0xb5/0x170 [btrfs] [ 8948.298123] __extent_writepage+0x156/0x3c0 [btrfs] [ 8948.298570] extent_write_cache_pages+0x263/0x460 [btrfs] [ 8948.299061] extent_writepages+0x76/0x130 [btrfs] [ 8948.299495] do_writepages+0xd2/0x1c0 [ 8948.299817] ? sched_clock_cpu+0xd/0x110 [ 8948.300160] ? lock_release+0x155/0x4a0 [ 8948.300494] filemap_fdatawrite_wbc+0x68/0x90 [ 8948.300874] ? do_raw_spin_unlock+0x4b/0xa0 [ 8948.301243] start_delalloc_inodes+0x17f/0x400 [btrfs] [ 8948.301706] ? lock_release+0x155/0x4a0 [ 8948.302055] btrfs_start_delalloc_roots+0x194/0x2a0 [btrfs] [ 8948.302564] flush_space+0x1f2/0x630 [btrfs] [ 8948.302970] btrfs_async_reclaim_data_space+0x108/0x1b0 [btrfs] [ 8948.303510] process_one_work+0x252/0x5a0 [ 8948.303860] ? process_one_work+0x5a0/0x5a0 [ 8948.304221] worker_thread+0x55/0x3b0 [ 8948.304543] ? process_one_work+0x5a0/0x5a0 [ 8948.304904] kthread+0xf2/0x120 [ 8948.305184] ? kthread_complete_and_exit+0x20/0x20 [ 8948.305598] ret_from_fork+0x22/0x30 [ 8948.305921] It all comes from the fact that btrfs_start_delalloc_roots() takes the delalloc_root_mutex, in the transaction commit path we are holding a read lock on one of the superblock's freeze semaphores (via sb_start_intwrite()), the async reclaim task can also do a call to btrfs_start_delalloc_roots(), which ends up triggering writeback with calls to filemap_fdatawrite_wbc(), resulting in extent allocation which in turn can call btrfs_start_transaction(), which will result in taking the freeze semaphore via sb_start_intwrite(), forming a nasty dependency on all those locks which can be taken in different orders by different code paths. So just adopt the simple approach of calling try_to_writeback_inodes_sb() at btrfs_start_delalloc_flush(). Link: https://lore.kernel.org/linux-btrfs/20220130005258.GA7465@cuci.nl/ Link: https://lore.kernel.org/linux-btrfs/43acc426-d683-d1b6-729d-c6bc4a2fff4d@gmail.com/ Link: https://lore.kernel.org/linux-btrfs/6833930a-08d7-6fbc-0141-eb9cdfd6bb4d@gmail.com/ Link: https://lore.kernel.org/linux-btrfs/20190322041731.GF16651@hungrycats.org/ Reviewed-by: Omar Sandoval Signed-off-by: Filipe Manana [ add more link reports ] Signed-off-by: David Sterba --- fs/btrfs/transaction.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index c43bbc7f623eec..c3cfdfd8de9b2d 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -1981,16 +1981,24 @@ static void btrfs_cleanup_pending_block_groups(struct btrfs_trans_handle *trans) static inline int btrfs_start_delalloc_flush(struct btrfs_fs_info *fs_info) { /* - * We use writeback_inodes_sb here because if we used + * We use try_to_writeback_inodes_sb() here because if we used * btrfs_start_delalloc_roots we would deadlock with fs freeze. * Currently are holding the fs freeze lock, if we do an async flush * we'll do btrfs_join_transaction() and deadlock because we need to * wait for the fs freeze lock. Using the direct flushing we benefit * from already being in a transaction and our join_transaction doesn't * have to re-take the fs freeze lock. + * + * Note that try_to_writeback_inodes_sb() will only trigger writeback + * if it can read lock sb->s_umount. It will always be able to lock it, + * except when the filesystem is being unmounted or being frozen, but in + * those cases sync_filesystem() is called, which results in calling + * writeback_inodes_sb() while holding a write lock on sb->s_umount. + * Note that we don't call writeback_inodes_sb() directly, because it + * will emit a warning if sb->s_umount is not locked. */ if (btrfs_test_opt(fs_info, FLUSHONCOMMIT)) - writeback_inodes_sb(fs_info->sb, WB_REASON_SYNC); + try_to_writeback_inodes_sb(fs_info->sb, WB_REASON_SYNC); return 0; } From 2e7be9db125a0bf940c5d65eb5c40d8700f738b5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?D=C4=81vis=20Mos=C4=81ns?= Date: Sat, 5 Feb 2022 20:48:23 +0200 Subject: [PATCH 098/493] btrfs: send: in case of IO error log it MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently if we get IO error while doing send then we abort without logging information about which file caused issue. So log it to help with debugging. CC: stable@vger.kernel.org # 4.9+ Signed-off-by: Dāvis Mosāns Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/send.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c index d8ccb62aa7d276..201eb2628aea11 100644 --- a/fs/btrfs/send.c +++ b/fs/btrfs/send.c @@ -4999,6 +4999,10 @@ static int put_file_data(struct send_ctx *sctx, u64 offset, u32 len) lock_page(page); if (!PageUptodate(page)) { unlock_page(page); + btrfs_err(fs_info, + "send: IO error at offset %llu for inode %llu root %llu", + page_offset(page), sctx->cur_ino, + sctx->send_root->root_key.objectid); put_page(page); ret = -EIO; break; From b97cca3ba9098522e5a1c3388764ead42640c1a5 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Thu, 3 Feb 2022 08:29:21 -0800 Subject: [PATCH 099/493] xfs: only bother with sync_filesystem during readonly remount In commit 02b9984d6408, we pushed a sync_filesystem() call from the VFS into xfs_fs_remount. The only time that we ever need to push dirty file data or metadata to disk for a remount is if we're remounting the filesystem read only, so this really could be moved to xfs_remount_ro. Once we've moved the call site, actually check the return value from sync_filesystem. Fixes: 02b9984d6408 ("fs: push sync_filesystem() down to the file system's remount_fs()") Signed-off-by: Darrick J. Wong Reviewed-by: Dave Chinner --- fs/xfs/xfs_super.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c index e8f37bdc835484..7c2f1338c6e8c2 100644 --- a/fs/xfs/xfs_super.c +++ b/fs/xfs/xfs_super.c @@ -1749,6 +1749,11 @@ xfs_remount_ro( }; int error; + /* Flush all the dirty data to disk. */ + error = sync_filesystem(mp->m_super); + if (error) + return error; + /* * Cancel background eofb scanning so it cannot race with the final * log force+buftarg wait and deadlock the remount. @@ -1827,8 +1832,6 @@ xfs_fs_reconfigure( if (error) return error; - sync_filesystem(mp->m_super); - /* inode32 -> inode64 */ if (xfs_has_small_inums(mp) && !xfs_has_small_inums(new_mp)) { mp->m_features &= ~XFS_FEAT_SMALL_INUMS; From bea2662e7818e15d7607d17d57912ac984275d94 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 8 Feb 2022 11:47:30 +0100 Subject: [PATCH 100/493] iwlwifi: fix use-after-free MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If no firmware was present at all (or, presumably, all of the firmware files failed to parse), we end up unbinding by calling device_release_driver(), which calls remove(), which then in iwlwifi calls iwl_drv_stop(), freeing the 'drv' struct. However the new code I added will still erroneously access it after it was freed. Set 'failure=false' in this case to avoid the access, all data was already freed anyway. Cc: stable@vger.kernel.org Reported-by: Stefan Agner Reported-by: Wolfgang Walter Reported-by: Jason Self Reported-by: Dominik Behr Reported-by: Marek Marczykowski-Górecki Fixes: ab07506b0454 ("iwlwifi: fix leaks/bad data after failed firmware load") Signed-off-by: Johannes Berg Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20220208114728.e6b514cf4c85.Iffb575ca2a623d7859b542c33b2a507d01554251@changeid --- drivers/net/wireless/intel/iwlwifi/iwl-drv.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c index 83e3b731ad296b..6651e78b39ecf9 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c @@ -1707,6 +1707,8 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context) out_unbind: complete(&drv->request_firmware_complete); device_release_driver(drv->trans->dev); + /* drv has just been freed by the release */ + failure = false; free: if (failure) iwl_dealloc_ucode(drv); From 8e1741c658996a16bd096e077dae0da2460a997f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 10 Feb 2022 13:33:43 +0100 Subject: [PATCH 101/493] ALSA: memalloc: Fix dma_need_sync() checks dma_need_sync() checks each DMA address. Fix the incorrect usages for non-contiguous and non-coherent page allocations. Fortunately, there are no actual call sites that need manual syncs yet. Fixes: a25684a95646 ("ALSA: memalloc: Support for non-contiguous page allocation") Fixes: 73325f60e2ed ("ALSA: memalloc: Support for non-coherent page allocation") Cc: Reported-by: Ezequiel Garcia Link: https://lore.kernel.org/r/20220210123344.8756-2-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/core/memalloc.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/sound/core/memalloc.c b/sound/core/memalloc.c index d1fcd1d5adae35..f98f694e3ce48f 100644 --- a/sound/core/memalloc.c +++ b/sound/core/memalloc.c @@ -511,7 +511,8 @@ static void *snd_dma_noncontig_alloc(struct snd_dma_buffer *dmab, size_t size) DEFAULT_GFP, 0); if (!sgt) return NULL; - dmab->dev.need_sync = dma_need_sync(dmab->dev.dev, dmab->dev.dir); + dmab->dev.need_sync = dma_need_sync(dmab->dev.dev, + sg_dma_address(sgt->sgl)); p = dma_vmap_noncontiguous(dmab->dev.dev, size, sgt); if (p) dmab->private_data = sgt; @@ -671,9 +672,13 @@ static const struct snd_malloc_ops snd_dma_sg_wc_ops = { */ static void *snd_dma_noncoherent_alloc(struct snd_dma_buffer *dmab, size_t size) { - dmab->dev.need_sync = dma_need_sync(dmab->dev.dev, dmab->dev.dir); - return dma_alloc_noncoherent(dmab->dev.dev, size, &dmab->addr, - dmab->dev.dir, DEFAULT_GFP); + void *p; + + p = dma_alloc_noncoherent(dmab->dev.dev, size, &dmab->addr, + dmab->dev.dir, DEFAULT_GFP); + if (p) + dmab->dev.need_sync = dma_need_sync(dmab->dev.dev, dmab->addr); + return p; } static void snd_dma_noncoherent_free(struct snd_dma_buffer *dmab) From 3e16dc50d77dc3494275a241fac250c94bf45206 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 10 Feb 2022 13:33:44 +0100 Subject: [PATCH 102/493] ALSA: memalloc: invalidate SG pages before sync It seems that calling invalidate_kernel_vmap_range() is more correct to be called before dma_sync_*(), judging from the other thread: https://lore.kernel.org/all/20220111085958.GA22795@lst.de/ Although this won't matter much in practice, let's fix the call order for consistency. Fixes: a25684a95646 ("ALSA: memalloc: Support for non-contiguous page allocation") Reported-by: Ezequiel Garcia Cc: Link: https://lore.kernel.org/r/20220210123344.8756-3-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/core/memalloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/core/memalloc.c b/sound/core/memalloc.c index f98f694e3ce48f..6fd763d4d15b19 100644 --- a/sound/core/memalloc.c +++ b/sound/core/memalloc.c @@ -541,9 +541,9 @@ static void snd_dma_noncontig_sync(struct snd_dma_buffer *dmab, if (mode == SNDRV_DMA_SYNC_CPU) { if (dmab->dev.dir == DMA_TO_DEVICE) return; + invalidate_kernel_vmap_range(dmab->area, dmab->bytes); dma_sync_sgtable_for_cpu(dmab->dev.dev, dmab->private_data, dmab->dev.dir); - invalidate_kernel_vmap_range(dmab->area, dmab->bytes); } else { if (dmab->dev.dir == DMA_FROM_DEVICE) return; From c8d251f51ee61df06ee0e419348d8c9160bbfb86 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 9 Feb 2022 15:25:20 -0800 Subject: [PATCH 103/493] ASoC: qcom: Actually clear DMA interrupt register for HDMI In commit da0363f7bfd3 ("ASoC: qcom: Fix for DMA interrupt clear reg overwriting") we changed regmap_write() to regmap_update_bits() so that we can avoid overwriting bits that we didn't intend to modify. Unfortunately this change breaks the case where a register is writable but not readable, which is exactly how the HDMI irq clear register is designed (grep around LPASS_HDMITX_APP_IRQCLEAR_REG to see how it's write only). That's because regmap_update_bits() tries to read the register from the hardware and if it isn't readable it looks in the regmap cache to see what was written there last time to compare against what we want to write there. Eventually, we're unable to modify this register at all because the bits that we're trying to set are already set in the cache. This is doubly bad for the irq clear register because you have to write the bit to clear an interrupt. Given the irq is level triggered, we see an interrupt storm upon plugging in an HDMI cable and starting audio playback. The irq storm is so great that performance degrades significantly, leading to CPU soft lockups. Fix it by using regmap_write_bits() so that we really do write the bits in the clear register that we want to. This brings the number of irqs handled by lpass_dma_interrupt_handler() down from ~150k/sec to ~10/sec. Fixes: da0363f7bfd3 ("ASoC: qcom: Fix for DMA interrupt clear reg overwriting") Cc: Srinivasa Rao Mandadapu Cc: Srinivas Kandagatla Signed-off-by: Stephen Boyd Link: https://lore.kernel.org/r/20220209232520.4017634-1-swboyd@chromium.org Signed-off-by: Mark Brown --- sound/soc/qcom/lpass-platform.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c index a59e9d20cb46b0..4b1773c1fb95fc 100644 --- a/sound/soc/qcom/lpass-platform.c +++ b/sound/soc/qcom/lpass-platform.c @@ -524,7 +524,7 @@ static int lpass_platform_pcmops_trigger(struct snd_soc_component *component, return -EINVAL; } - ret = regmap_update_bits(map, reg_irqclr, val_irqclr, val_irqclr); + ret = regmap_write_bits(map, reg_irqclr, val_irqclr, val_irqclr); if (ret) { dev_err(soc_runtime->dev, "error writing to irqclear reg: %d\n", ret); return ret; @@ -665,7 +665,7 @@ static irqreturn_t lpass_dma_interrupt_handler( return -EINVAL; } if (interrupts & LPAIF_IRQ_PER(chan)) { - rv = regmap_update_bits(map, reg, mask, (LPAIF_IRQ_PER(chan) | val)); + rv = regmap_write_bits(map, reg, mask, (LPAIF_IRQ_PER(chan) | val)); if (rv) { dev_err(soc_runtime->dev, "error writing to irqclear reg: %d\n", rv); @@ -676,7 +676,7 @@ static irqreturn_t lpass_dma_interrupt_handler( } if (interrupts & LPAIF_IRQ_XRUN(chan)) { - rv = regmap_update_bits(map, reg, mask, (LPAIF_IRQ_XRUN(chan) | val)); + rv = regmap_write_bits(map, reg, mask, (LPAIF_IRQ_XRUN(chan) | val)); if (rv) { dev_err(soc_runtime->dev, "error writing to irqclear reg: %d\n", rv); @@ -688,7 +688,7 @@ static irqreturn_t lpass_dma_interrupt_handler( } if (interrupts & LPAIF_IRQ_ERR(chan)) { - rv = regmap_update_bits(map, reg, mask, (LPAIF_IRQ_ERR(chan) | val)); + rv = regmap_write_bits(map, reg, mask, (LPAIF_IRQ_ERR(chan) | val)); if (rv) { dev_err(soc_runtime->dev, "error writing to irqclear reg: %d\n", rv); From 2b4e5fb4d3776c391e40fb33673ba946dd96012d Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Thu, 10 Feb 2022 10:06:42 +0100 Subject: [PATCH 104/493] netfilter: nft_synproxy: unregister hooks on init error path Disable the IPv4 hooks if the IPv6 hooks fail to be registered. Fixes: ad49d86e07a4 ("netfilter: nf_tables: Add synproxy support") Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nft_synproxy.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nft_synproxy.c b/net/netfilter/nft_synproxy.c index a0109fa1e92d08..1133e06f3c40eb 100644 --- a/net/netfilter/nft_synproxy.c +++ b/net/netfilter/nft_synproxy.c @@ -191,8 +191,10 @@ static int nft_synproxy_do_init(const struct nft_ctx *ctx, if (err) goto nf_ct_failure; err = nf_synproxy_ipv6_init(snet, ctx->net); - if (err) + if (err) { + nf_synproxy_ipv4_fini(snet, ctx->net); goto nf_ct_failure; + } break; } From 249749c88906a00dc937a750406a36dfd11b5701 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Thu, 10 Feb 2022 10:11:52 +0100 Subject: [PATCH 105/493] selftests: netfilter: synproxy test requires nf_conntrack Otherwise, this test does not find the sysctl entry in place: sysctl: cannot stat /proc/sys/net/netfilter/nf_conntrack_tcp_loose: No such file or directory iperf3: error - unable to send control message: Bad file descriptor FAIL: iperf3 returned an error Fixes: 7152303cbec4 ("selftests: netfilter: add synproxy test") Signed-off-by: Pablo Neira Ayuso --- tools/testing/selftests/netfilter/nft_synproxy.sh | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/testing/selftests/netfilter/nft_synproxy.sh b/tools/testing/selftests/netfilter/nft_synproxy.sh index 09bb95c871989e..b62933b680d6c5 100755 --- a/tools/testing/selftests/netfilter/nft_synproxy.sh +++ b/tools/testing/selftests/netfilter/nft_synproxy.sh @@ -23,6 +23,8 @@ checktool "ip -Version" "run test without ip tool" checktool "iperf3 --version" "run test without iperf3" checktool "ip netns add $nsr" "create net namespace" +modprobe -q nf_conntrack + ip netns add $ns1 ip netns add $ns2 From a887f9c7a4d37a8e874ba8415a42a92a1b5139fc Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Thu, 10 Feb 2022 17:20:51 +0000 Subject: [PATCH 106/493] ASoC: wm_adsp: Correct control read size when parsing compressed buffer When parsing the compressed stream the whole buffer descriptor is now read in a single cs_dsp_coeff_read_ctrl; on older firmwares this descriptor is just 4 bytes but on more modern firmwares it is 24 bytes. The current code reads the full 24 bytes regardless, this was working but reading junk for the last 20 bytes. However commit f444da38ac92 ("firmware: cs_dsp: Add offset to cs_dsp read/write") added a size check into cs_dsp_coeff_read_ctrl, causing the older firmwares to now return an error. Update the code to only read the amount of data appropriate for the firmware loaded. Fixes: 04ae08596737 ("ASoC: wm_adsp: Switch to using wm_coeff_read_ctrl for compressed buffers") Signed-off-by: Charles Keepax Link: https://lore.kernel.org/r/20220210172053.22782-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown --- sound/soc/codecs/wm_adsp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c index f3672e3d1703e4..0582585236a282 100644 --- a/sound/soc/codecs/wm_adsp.c +++ b/sound/soc/codecs/wm_adsp.c @@ -1441,7 +1441,8 @@ static int wm_adsp_buffer_parse_coeff(struct cs_dsp_coeff_ctl *cs_ctl) int ret, i; for (i = 0; i < 5; ++i) { - ret = cs_dsp_coeff_read_ctrl(cs_ctl, 0, &coeff_v1, sizeof(coeff_v1)); + ret = cs_dsp_coeff_read_ctrl(cs_ctl, 0, &coeff_v1, + min(cs_ctl->len, sizeof(coeff_v1))); if (ret < 0) return ret; From fcb732d8f8cf6084f8480015ad41d25fb023a4dd Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 25 Oct 2021 14:29:01 +0100 Subject: [PATCH 107/493] KVM: x86/xen: Fix runstate updates to be atomic when preempting vCPU MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There are circumstances whem kvm_xen_update_runstate_guest() should not sleep because it ends up being called from __schedule() when the vCPU is preempted: [ 222.830825] kvm_xen_update_runstate_guest+0x24/0x100 [ 222.830878] kvm_arch_vcpu_put+0x14c/0x200 [ 222.830920] kvm_sched_out+0x30/0x40 [ 222.830960] __schedule+0x55c/0x9f0 To handle this, make it use the same trick as __kvm_xen_has_interrupt(), of using the hva from the gfn_to_hva_cache directly. Then it can use pagefault_disable() around the accesses and just bail out if the page is absent (which is unlikely). I almost switched to using a gfn_to_pfn_cache here and bailing out if kvm_map_gfn() fails, like kvm_steal_time_set_preempted() does — but on closer inspection it looks like kvm_map_gfn() will *always* fail in atomic context for a page in IOMEM, which means it will silently fail to make the update every single time for such guests, AFAICT. So I didn't do it that way after all. And will probably fix that one too. Cc: stable@vger.kernel.org Fixes: 30b5c851af79 ("KVM: x86/xen: Add support for vCPU runstate information") Signed-off-by: David Woodhouse Message-Id: Signed-off-by: Paolo Bonzini --- arch/x86/kvm/xen.c | 97 ++++++++++++++++++++++++++++++++-------------- 1 file changed, 67 insertions(+), 30 deletions(-) diff --git a/arch/x86/kvm/xen.c b/arch/x86/kvm/xen.c index bad57535fad082..74be1fda58e34c 100644 --- a/arch/x86/kvm/xen.c +++ b/arch/x86/kvm/xen.c @@ -133,32 +133,57 @@ static void kvm_xen_update_runstate(struct kvm_vcpu *v, int state) void kvm_xen_update_runstate_guest(struct kvm_vcpu *v, int state) { struct kvm_vcpu_xen *vx = &v->arch.xen; + struct gfn_to_hva_cache *ghc = &vx->runstate_cache; + struct kvm_memslots *slots = kvm_memslots(v->kvm); + bool atomic = (state == RUNSTATE_runnable); uint64_t state_entry_time; - unsigned int offset; + int __user *user_state; + uint64_t __user *user_times; kvm_xen_update_runstate(v, state); if (!vx->runstate_set) return; - BUILD_BUG_ON(sizeof(struct compat_vcpu_runstate_info) != 0x2c); + if (unlikely(slots->generation != ghc->generation || kvm_is_error_hva(ghc->hva)) && + kvm_gfn_to_hva_cache_init(v->kvm, ghc, ghc->gpa, ghc->len)) + return; + + /* We made sure it fits in a single page */ + BUG_ON(!ghc->memslot); + + if (atomic) + pagefault_disable(); - offset = offsetof(struct compat_vcpu_runstate_info, state_entry_time); -#ifdef CONFIG_X86_64 /* - * The only difference is alignment of uint64_t in 32-bit. - * So the first field 'state' is accessed directly using - * offsetof() (where its offset happens to be zero), while the - * remaining fields which are all uint64_t, start at 'offset' - * which we tweak here by adding 4. + * The only difference between 32-bit and 64-bit versions of the + * runstate struct us the alignment of uint64_t in 32-bit, which + * means that the 64-bit version has an additional 4 bytes of + * padding after the first field 'state'. + * + * So we use 'int __user *user_state' to point to the state field, + * and 'uint64_t __user *user_times' for runstate_entry_time. So + * the actual array of time[] in each state starts at user_times[1]. */ + BUILD_BUG_ON(offsetof(struct vcpu_runstate_info, state) != 0); + BUILD_BUG_ON(offsetof(struct compat_vcpu_runstate_info, state) != 0); + user_state = (int __user *)ghc->hva; + + BUILD_BUG_ON(sizeof(struct compat_vcpu_runstate_info) != 0x2c); + + user_times = (uint64_t __user *)(ghc->hva + + offsetof(struct compat_vcpu_runstate_info, + state_entry_time)); +#ifdef CONFIG_X86_64 BUILD_BUG_ON(offsetof(struct vcpu_runstate_info, state_entry_time) != offsetof(struct compat_vcpu_runstate_info, state_entry_time) + 4); BUILD_BUG_ON(offsetof(struct vcpu_runstate_info, time) != offsetof(struct compat_vcpu_runstate_info, time) + 4); if (v->kvm->arch.xen.long_mode) - offset = offsetof(struct vcpu_runstate_info, state_entry_time); + user_times = (uint64_t __user *)(ghc->hva + + offsetof(struct vcpu_runstate_info, + state_entry_time)); #endif /* * First write the updated state_entry_time at the appropriate @@ -172,10 +197,8 @@ void kvm_xen_update_runstate_guest(struct kvm_vcpu *v, int state) BUILD_BUG_ON(sizeof_field(struct compat_vcpu_runstate_info, state_entry_time) != sizeof(state_entry_time)); - if (kvm_write_guest_offset_cached(v->kvm, &v->arch.xen.runstate_cache, - &state_entry_time, offset, - sizeof(state_entry_time))) - return; + if (__put_user(state_entry_time, user_times)) + goto out; smp_wmb(); /* @@ -189,11 +212,8 @@ void kvm_xen_update_runstate_guest(struct kvm_vcpu *v, int state) BUILD_BUG_ON(sizeof_field(struct compat_vcpu_runstate_info, state) != sizeof(vx->current_runstate)); - if (kvm_write_guest_offset_cached(v->kvm, &v->arch.xen.runstate_cache, - &vx->current_runstate, - offsetof(struct vcpu_runstate_info, state), - sizeof(vx->current_runstate))) - return; + if (__put_user(vx->current_runstate, user_state)) + goto out; /* * Write the actual runstate times immediately after the @@ -208,24 +228,23 @@ void kvm_xen_update_runstate_guest(struct kvm_vcpu *v, int state) BUILD_BUG_ON(sizeof_field(struct vcpu_runstate_info, time) != sizeof(vx->runstate_times)); - if (kvm_write_guest_offset_cached(v->kvm, &v->arch.xen.runstate_cache, - &vx->runstate_times[0], - offset + sizeof(u64), - sizeof(vx->runstate_times))) - return; - + if (__copy_to_user(user_times + 1, vx->runstate_times, sizeof(vx->runstate_times))) + goto out; smp_wmb(); /* * Finally, clear the XEN_RUNSTATE_UPDATE bit in the guest's * runstate_entry_time field. */ - state_entry_time &= ~XEN_RUNSTATE_UPDATE; - if (kvm_write_guest_offset_cached(v->kvm, &v->arch.xen.runstate_cache, - &state_entry_time, offset, - sizeof(state_entry_time))) - return; + __put_user(state_entry_time, user_times); + smp_wmb(); + + out: + mark_page_dirty_in_slot(v->kvm, ghc->memslot, ghc->gpa >> PAGE_SHIFT); + + if (atomic) + pagefault_enable(); } int __kvm_xen_has_interrupt(struct kvm_vcpu *v) @@ -443,6 +462,12 @@ int kvm_xen_vcpu_set_attr(struct kvm_vcpu *vcpu, struct kvm_xen_vcpu_attr *data) break; } + /* It must fit within a single page */ + if ((data->u.gpa & ~PAGE_MASK) + sizeof(struct vcpu_info) > PAGE_SIZE) { + r = -EINVAL; + break; + } + r = kvm_gfn_to_hva_cache_init(vcpu->kvm, &vcpu->arch.xen.vcpu_info_cache, data->u.gpa, @@ -460,6 +485,12 @@ int kvm_xen_vcpu_set_attr(struct kvm_vcpu *vcpu, struct kvm_xen_vcpu_attr *data) break; } + /* It must fit within a single page */ + if ((data->u.gpa & ~PAGE_MASK) + sizeof(struct pvclock_vcpu_time_info) > PAGE_SIZE) { + r = -EINVAL; + break; + } + r = kvm_gfn_to_hva_cache_init(vcpu->kvm, &vcpu->arch.xen.vcpu_time_info_cache, data->u.gpa, @@ -481,6 +512,12 @@ int kvm_xen_vcpu_set_attr(struct kvm_vcpu *vcpu, struct kvm_xen_vcpu_attr *data) break; } + /* It must fit within a single page */ + if ((data->u.gpa & ~PAGE_MASK) + sizeof(struct vcpu_runstate_info) > PAGE_SIZE) { + r = -EINVAL; + break; + } + r = kvm_gfn_to_hva_cache_init(vcpu->kvm, &vcpu->arch.xen.runstate_cache, data->u.gpa, From bbe4c0896d25009a7c86285d2ab024eed4374eea Mon Sep 17 00:00:00 2001 From: Hangbin Liu Date: Thu, 10 Feb 2022 17:50:56 +0800 Subject: [PATCH 108/493] selftests: netfilter: disable rp_filter on router Some distros may enable rp_filter by default. After ns1 change addr to 10.0.2.99 and set default router to 10.0.2.1, while the connected router address is still 10.0.1.1. The router will not reply the arp request from ns1. Fix it by setting the router's veth0 rp_filter to 0. Before the fix: # ./nft_fib.sh PASS: fib expression did not cause unwanted packet drops Netns nsrouter-HQkDORO2 fib counter doesn't match expected packet count of 1 for 1.1.1.1 table inet filter { chain prerouting { type filter hook prerouting priority filter; policy accept; ip daddr 1.1.1.1 fib saddr . iif oif missing counter packets 0 bytes 0 drop ip6 daddr 1c3::c01d fib saddr . iif oif missing counter packets 0 bytes 0 drop } } After the fix: # ./nft_fib.sh PASS: fib expression did not cause unwanted packet drops PASS: fib expression did drop packets for 1.1.1.1 PASS: fib expression did drop packets for 1c3::c01d Fixes: 82944421243e ("selftests: netfilter: add fib test case") Signed-off-by: Yi Chen Signed-off-by: Hangbin Liu Signed-off-by: Pablo Neira Ayuso --- tools/testing/selftests/netfilter/nft_fib.sh | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/netfilter/nft_fib.sh b/tools/testing/selftests/netfilter/nft_fib.sh index 6caf6ac8c285f7..695a1958723f56 100755 --- a/tools/testing/selftests/netfilter/nft_fib.sh +++ b/tools/testing/selftests/netfilter/nft_fib.sh @@ -174,6 +174,7 @@ test_ping() { ip netns exec ${nsrouter} sysctl net.ipv6.conf.all.forwarding=1 > /dev/null ip netns exec ${nsrouter} sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null ip netns exec ${nsrouter} sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null +ip netns exec ${nsrouter} sysctl net.ipv4.conf.veth0.rp_filter=0 > /dev/null sleep 3 From ba2ab85951c91a140a8fa51d8347d54e59ec009d Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 9 Feb 2022 21:08:06 +0300 Subject: [PATCH 109/493] pinctrl: fix loop in k210_pinconf_get_drive() The loop exited too early so the k210_pinconf_drive_strength[0] array element was never used. Fixes: d4c34d09ab03 ("pinctrl: Add RISC-V Canaan Kendryte K210 FPIOA driver") Signed-off-by: Dan Carpenter Reviewed-by: Damien Le Moal Reviewed-by: Sean Anderson Link: https://lore.kernel.org/r/20220209180804.GA18385@kili Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-k210.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinctrl-k210.c b/drivers/pinctrl/pinctrl-k210.c index 49e32684dbb258..e3d03f2de7ef55 100644 --- a/drivers/pinctrl/pinctrl-k210.c +++ b/drivers/pinctrl/pinctrl-k210.c @@ -482,7 +482,7 @@ static int k210_pinconf_get_drive(unsigned int max_strength_ua) { int i; - for (i = K210_PC_DRIVE_MAX; i; i--) { + for (i = K210_PC_DRIVE_MAX; i >= 0; i--) { if (k210_pinconf_drive_strength[i] <= max_strength_ua) return i; } From e9f7b9228a94778edb7a63fde3c0a3c5bb793064 Mon Sep 17 00:00:00 2001 From: Sean Anderson Date: Wed, 9 Feb 2022 13:28:22 -0500 Subject: [PATCH 110/493] pinctrl: k210: Fix bias-pull-up Using bias-pull-up would actually cause the pin to have its pull-down enabled. Fix this. Signed-off-by: Sean Anderson Reviewed-by: Damien Le Moal Fixes: d4c34d09ab03 ("pinctrl: Add RISC-V Canaan Kendryte K210 FPIOA driver") Link: https://lore.kernel.org/r/20220209182822.640905-1-seanga2@gmail.com Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-k210.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinctrl-k210.c b/drivers/pinctrl/pinctrl-k210.c index e3d03f2de7ef55..ecab6bf63dc6d3 100644 --- a/drivers/pinctrl/pinctrl-k210.c +++ b/drivers/pinctrl/pinctrl-k210.c @@ -527,7 +527,7 @@ static int k210_pinconf_set_param(struct pinctrl_dev *pctldev, case PIN_CONFIG_BIAS_PULL_UP: if (!arg) return -EINVAL; - val |= K210_PC_PD; + val |= K210_PC_PU; break; case PIN_CONFIG_DRIVE_STRENGTH: arg *= 1000; From d1c56bfdaca465bd1d0e913053a9c5cafe8b6a6c Mon Sep 17 00:00:00 2001 From: Christian Brauner Date: Thu, 3 Feb 2022 14:14:05 +0100 Subject: [PATCH 111/493] tests: fix idmapped mount_setattr test The test treated zero as a successful run when it really should treat non-zero as a successful run. A mount's idmapping can't change once it has been attached to the filesystem. Link: https://lore.kernel.org/r/20220203131411.3093040-2-brauner@kernel.org Fixes: 01eadc8dd96d ("tests: add mount_setattr() selftests") Cc: Seth Forshee Cc: Christoph Hellwig Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig Signed-off-by: Christian Brauner --- tools/testing/selftests/mount_setattr/mount_setattr_test.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/mount_setattr/mount_setattr_test.c b/tools/testing/selftests/mount_setattr/mount_setattr_test.c index f31205f04ee050..8c5fea68ae677b 100644 --- a/tools/testing/selftests/mount_setattr/mount_setattr_test.c +++ b/tools/testing/selftests/mount_setattr/mount_setattr_test.c @@ -1236,7 +1236,7 @@ static int get_userns_fd(unsigned long nsid, unsigned long hostid, unsigned long } /** - * Validate that an attached mount in our mount namespace can be idmapped. + * Validate that an attached mount in our mount namespace cannot be idmapped. * (The kernel enforces that the mount's mount namespace and the caller's mount * namespace match.) */ @@ -1259,7 +1259,7 @@ TEST_F(mount_setattr_idmapped, attached_mount_inside_current_mount_namespace) attr.userns_fd = get_userns_fd(0, 10000, 10000); ASSERT_GE(attr.userns_fd, 0); - ASSERT_EQ(sys_mount_setattr(open_tree_fd, "", AT_EMPTY_PATH, &attr, sizeof(attr)), 0); + ASSERT_NE(sys_mount_setattr(open_tree_fd, "", AT_EMPTY_PATH, &attr, sizeof(attr)), 0); ASSERT_EQ(close(attr.userns_fd), 0); ASSERT_EQ(close(open_tree_fd), 0); } From 97acd701185b13825f8ec7882345040415d46762 Mon Sep 17 00:00:00 2001 From: Christian Brauner Date: Thu, 3 Feb 2022 14:14:06 +0100 Subject: [PATCH 112/493] MAINTAINERS: add entry for idmapped mounts I'd like to continue maintaining the work that was done around idmapped, make sure that I'm Cced on new patches and work that impacts the infrastructure. Link: https://lore.kernel.org/r/20220203131411.3093040-3-brauner@kernel.org Cc: Seth Forshee Cc: Christoph Hellwig Cc: Al Viro Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig Signed-off-by: Christian Brauner --- MAINTAINERS | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index f41088418aae25..0496b973bb8720 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9253,6 +9253,15 @@ S: Maintained W: https://github.com/o2genum/ideapad-slidebar F: drivers/input/misc/ideapad_slidebar.c +IDMAPPED MOUNTS +M: Christian Brauner +L: linux-fsdevel@vger.kernel.org +S: Maintained +T: git git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux.git +F: Documentation/filesystems/idmappings.rst +F: tools/testing/selftests/mount_setattr/ +F: include/linux/mnt_idmapping.h + IDT VersaClock 5 CLOCK DRIVER M: Luca Ceresoli S: Maintained From ddc204b517e60ae64db34f9832dc41dafa77c751 Mon Sep 17 00:00:00 2001 From: Waiman Long Date: Tue, 8 Feb 2022 11:39:12 -0500 Subject: [PATCH 113/493] copy_process(): Move fd_install() out of sighand->siglock critical section I was made aware of the following lockdep splat: [ 2516.308763] ===================================================== [ 2516.309085] WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected [ 2516.309433] 5.14.0-51.el9.aarch64+debug #1 Not tainted [ 2516.309703] ----------------------------------------------------- [ 2516.310149] stress-ng/153663 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 2516.310512] ffff0000e422b198 (&newf->file_lock){+.+.}-{2:2}, at: fd_install+0x368/0x4f0 [ 2516.310944] and this task is already holding: [ 2516.311248] ffff0000c08140d8 (&sighand->siglock){-.-.}-{2:2}, at: copy_process+0x1e2c/0x3e80 [ 2516.311804] which would create a new lock dependency: [ 2516.312066] (&sighand->siglock){-.-.}-{2:2} -> (&newf->file_lock){+.+.}-{2:2} [ 2516.312446] but this new dependency connects a HARDIRQ-irq-safe lock: [ 2516.312983] (&sighand->siglock){-.-.}-{2:2} : [ 2516.330700] Possible interrupt unsafe locking scenario: [ 2516.331075] CPU0 CPU1 [ 2516.331328] ---- ---- [ 2516.331580] lock(&newf->file_lock); [ 2516.331790] local_irq_disable(); [ 2516.332231] lock(&sighand->siglock); [ 2516.332579] lock(&newf->file_lock); [ 2516.332922] [ 2516.333069] lock(&sighand->siglock); [ 2516.333291] *** DEADLOCK *** [ 2516.389845] stack backtrace: [ 2516.390101] CPU: 3 PID: 153663 Comm: stress-ng Kdump: loaded Not tainted 5.14.0-51.el9.aarch64+debug #1 [ 2516.390756] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 2516.391155] Call trace: [ 2516.391302] dump_backtrace+0x0/0x3e0 [ 2516.391518] show_stack+0x24/0x30 [ 2516.391717] dump_stack_lvl+0x9c/0xd8 [ 2516.391938] dump_stack+0x1c/0x38 [ 2516.392247] print_bad_irq_dependency+0x620/0x710 [ 2516.392525] check_irq_usage+0x4fc/0x86c [ 2516.392756] check_prev_add+0x180/0x1d90 [ 2516.392988] validate_chain+0x8e0/0xee0 [ 2516.393215] __lock_acquire+0x97c/0x1e40 [ 2516.393449] lock_acquire.part.0+0x240/0x570 [ 2516.393814] lock_acquire+0x90/0xb4 [ 2516.394021] _raw_spin_lock+0xe8/0x154 [ 2516.394244] fd_install+0x368/0x4f0 [ 2516.394451] copy_process+0x1f5c/0x3e80 [ 2516.394678] kernel_clone+0x134/0x660 [ 2516.394895] __do_sys_clone3+0x130/0x1f4 [ 2516.395128] __arm64_sys_clone3+0x5c/0x7c [ 2516.395478] invoke_syscall.constprop.0+0x78/0x1f0 [ 2516.395762] el0_svc_common.constprop.0+0x22c/0x2c4 [ 2516.396050] do_el0_svc+0xb0/0x10c [ 2516.396252] el0_svc+0x24/0x34 [ 2516.396436] el0t_64_sync_handler+0xa4/0x12c [ 2516.396688] el0t_64_sync+0x198/0x19c [ 2517.491197] NET: Registered PF_ATMPVC protocol family [ 2517.491524] NET: Registered PF_ATMSVC protocol family [ 2591.991877] sched: RT throttling activated One way to solve this problem is to move the fd_install() call out of the sighand->siglock critical section. Before commit 6fd2fe494b17 ("copy_process(): don't use ksys_close() on cleanups"), the pidfd installation was done without holding both the task_list lock and the sighand->siglock. Obviously, holding these two locks are not really needed to protect the fd_install() call. So move the fd_install() call down to after the releases of both locks. Link: https://lore.kernel.org/r/20220208163912.1084752-1-longman@redhat.com Fixes: 6fd2fe494b17 ("copy_process(): don't use ksys_close() on cleanups") Reviewed-by: "Eric W. Biederman" Signed-off-by: Waiman Long Signed-off-by: Christian Brauner --- kernel/fork.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/kernel/fork.c b/kernel/fork.c index d75a528f7b2196..007af7fb47c75d 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -2323,10 +2323,6 @@ static __latent_entropy struct task_struct *copy_process( goto bad_fork_cancel_cgroup; } - /* past the last point of failure */ - if (pidfile) - fd_install(pidfd, pidfile); - init_task_pid_links(p); if (likely(p->pid)) { ptrace_init_task(p, (clone_flags & CLONE_PTRACE) || trace); @@ -2375,6 +2371,9 @@ static __latent_entropy struct task_struct *copy_process( syscall_tracepoint_update(p); write_unlock_irq(&tasklist_lock); + if (pidfile) + fd_install(pidfd, pidfile); + proc_fork_connector(p); sched_post_fork(p, args); cgroup_post_fork(p, args); From 5bfa685e62e9ba93c303a9a8db646c7228b9b570 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Thu, 3 Feb 2022 09:24:45 +0000 Subject: [PATCH 114/493] KVM: arm64: vgic: Read HW interrupt pending state from the HW It appears that a read access to GIC[DR]_I[CS]PENDRn doesn't always result in the pending interrupts being accurately reported if they are mapped to a HW interrupt. This is particularily visible when acking the timer interrupt and reading the GICR_ISPENDR1 register immediately after, for example (the interrupt appears as not-pending while it really is...). This is because a HW interrupt has its 'active and pending state' kept in the *physical* distributor, and not in the virtual one, as mandated by the spec (this is what allows the direct deactivation). The virtual distributor only caries the pending and active *states* (note the plural, as these are two independent and non-overlapping states). Fix it by reading the HW state back, either from the timer itself or from the distributor if necessary. Reported-by: Ricardo Koller Tested-by: Ricardo Koller Reviewed-by: Ricardo Koller Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20220208123726.3604198-1-maz@kernel.org --- arch/arm64/kvm/vgic/vgic-mmio.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/kvm/vgic/vgic-mmio.c b/arch/arm64/kvm/vgic/vgic-mmio.c index 7068da080799c5..49837d3a3ef562 100644 --- a/arch/arm64/kvm/vgic/vgic-mmio.c +++ b/arch/arm64/kvm/vgic/vgic-mmio.c @@ -248,6 +248,8 @@ unsigned long vgic_mmio_read_pending(struct kvm_vcpu *vcpu, IRQCHIP_STATE_PENDING, &val); WARN_RATELIMIT(err, "IRQ %d", irq->host_irq); + } else if (vgic_irq_is_mapped_level(irq)) { + val = vgic_get_phys_line_level(irq); } else { val = irq_is_pending(irq); } From 1de9770d121ee9294794cca0e0be8fbfa0134ee8 Mon Sep 17 00:00:00 2001 From: Wen Gu Date: Wed, 9 Feb 2022 22:10:53 +0800 Subject: [PATCH 115/493] net/smc: Avoid overwriting the copies of clcsock callback functions The callback functions of clcsock will be saved and replaced during the fallback. But if the fallback happens more than once, then the copies of these callback functions will be overwritten incorrectly, resulting in a loop call issue: clcsk->sk_error_report |- smc_fback_error_report() <------------------------------| |- smc_fback_forward_wakeup() | (loop) |- clcsock_callback() (incorrectly overwritten) | |- smc->clcsk_error_report() ------------------| So this patch fixes the issue by saving these function pointers only once in the fallback and avoiding overwriting. Reported-by: syzbot+4de3c0e8a263e1e499bc@syzkaller.appspotmail.com Fixes: 341adeec9ada ("net/smc: Forward wakeup to smc socket waitqueue after fallback") Link: https://lore.kernel.org/r/0000000000006d045e05d78776f6@google.com Signed-off-by: Wen Gu Signed-off-by: David S. Miller --- net/smc/af_smc.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index 8c89d0b0ca1857..306d9e8cd1ddce 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -667,14 +667,17 @@ static void smc_fback_error_report(struct sock *clcsk) static int smc_switch_to_fallback(struct smc_sock *smc, int reason_code) { struct sock *clcsk; + int rc = 0; mutex_lock(&smc->clcsock_release_lock); if (!smc->clcsock) { - mutex_unlock(&smc->clcsock_release_lock); - return -EBADF; + rc = -EBADF; + goto out; } clcsk = smc->clcsock->sk; + if (smc->use_fallback) + goto out; smc->use_fallback = true; smc->fallback_rsn = reason_code; smc_stat_fallback(smc); @@ -702,8 +705,9 @@ static int smc_switch_to_fallback(struct smc_sock *smc, int reason_code) smc->clcsock->sk->sk_user_data = (void *)((uintptr_t)smc | SK_USER_DATA_NOCOPY); } +out: mutex_unlock(&smc->clcsock_release_lock); - return 0; + return rc; } /* fall back during connect */ From dcd54265c8bc14bd023815e36e2d5f9d66ee1fee Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 10 Feb 2022 09:13:31 -0800 Subject: [PATCH 116/493] drop_monitor: fix data-race in dropmon_net_event / trace_napi_poll_hit trace_napi_poll_hit() is reading stat->dev while another thread can write on it from dropmon_net_event() Use READ_ONCE()/WRITE_ONCE() here, RCU rules are properly enforced already, we only have to take care of load/store tearing. BUG: KCSAN: data-race in dropmon_net_event / trace_napi_poll_hit write to 0xffff88816f3ab9c0 of 8 bytes by task 20260 on cpu 1: dropmon_net_event+0xb8/0x2b0 net/core/drop_monitor.c:1579 notifier_call_chain kernel/notifier.c:84 [inline] raw_notifier_call_chain+0x53/0xb0 kernel/notifier.c:392 call_netdevice_notifiers_info net/core/dev.c:1919 [inline] call_netdevice_notifiers_extack net/core/dev.c:1931 [inline] call_netdevice_notifiers net/core/dev.c:1945 [inline] unregister_netdevice_many+0x867/0xfb0 net/core/dev.c:10415 ip_tunnel_delete_nets+0x24a/0x280 net/ipv4/ip_tunnel.c:1123 vti_exit_batch_net+0x2a/0x30 net/ipv4/ip_vti.c:515 ops_exit_list net/core/net_namespace.c:173 [inline] cleanup_net+0x4dc/0x8d0 net/core/net_namespace.c:597 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x1bf/0x1e0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 read to 0xffff88816f3ab9c0 of 8 bytes by interrupt on cpu 0: trace_napi_poll_hit+0x89/0x1c0 net/core/drop_monitor.c:292 trace_napi_poll include/trace/events/napi.h:14 [inline] __napi_poll+0x36b/0x3f0 net/core/dev.c:6366 napi_poll net/core/dev.c:6432 [inline] net_rx_action+0x29e/0x650 net/core/dev.c:6519 __do_softirq+0x158/0x2de kernel/softirq.c:558 do_softirq+0xb1/0xf0 kernel/softirq.c:459 __local_bh_enable_ip+0x68/0x70 kernel/softirq.c:383 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline] _raw_spin_unlock_bh+0x33/0x40 kernel/locking/spinlock.c:210 spin_unlock_bh include/linux/spinlock.h:394 [inline] ptr_ring_consume_bh include/linux/ptr_ring.h:367 [inline] wg_packet_decrypt_worker+0x73c/0x780 drivers/net/wireguard/receive.c:506 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x1bf/0x1e0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 value changed: 0xffff88815883e000 -> 0x0000000000000000 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 26435 Comm: kworker/0:1 Not tainted 5.17.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: wg-crypt-wg2 wg_packet_decrypt_worker Fixes: 4ea7e38696c7 ("dropmon: add ability to detect when hardware dropsrxpackets") Signed-off-by: Eric Dumazet Cc: Neil Horman Reported-by: syzbot Signed-off-by: David S. Miller --- net/core/drop_monitor.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c index 7b288a121a41a7..d5dc6be2522cbe 100644 --- a/net/core/drop_monitor.c +++ b/net/core/drop_monitor.c @@ -283,13 +283,17 @@ static void trace_napi_poll_hit(void *ignore, struct napi_struct *napi, rcu_read_lock(); list_for_each_entry_rcu(new_stat, &hw_stats_list, list) { + struct net_device *dev; + /* * only add a note to our monitor buffer if: * 1) this is the dev we received on * 2) its after the last_rx delta * 3) our rx_dropped count has gone up */ - if ((new_stat->dev == napi->dev) && + /* Paired with WRITE_ONCE() in dropmon_net_event() */ + dev = READ_ONCE(new_stat->dev); + if ((dev == napi->dev) && (time_after(jiffies, new_stat->last_rx + dm_hw_check_delta)) && (napi->dev->stats.rx_dropped != new_stat->last_drop_val)) { trace_drop_common(NULL, NULL); @@ -1576,7 +1580,10 @@ static int dropmon_net_event(struct notifier_block *ev_block, mutex_lock(&net_dm_mutex); list_for_each_entry_safe(new_stat, tmp, &hw_stats_list, list) { if (new_stat->dev == dev) { - new_stat->dev = NULL; + + /* Paired with READ_ONCE() in trace_napi_poll_hit() */ + WRITE_ONCE(new_stat->dev, NULL); + if (trace_state == TRACE_OFF) { list_del_rcu(&new_stat->list); kfree_rcu(new_stat, rcu); From 4a11678f683814df82fca9018d964771e02d7e6d Mon Sep 17 00:00:00 2001 From: Felix Maurer Date: Wed, 9 Feb 2022 16:55:26 +0100 Subject: [PATCH 117/493] bpf: Do not try bpf_msg_push_data with len 0 If bpf_msg_push_data() is called with len 0 (as it happens during selftests/bpf/test_sockmap), we do not need to do anything and can return early. Calling bpf_msg_push_data() with len 0 previously lead to a wrong ENOMEM error: we later called get_order(copy + len); if len was 0, copy + len was also often 0 and get_order() returned some undefined value (at the moment 52). alloc_pages() caught that and failed, but then bpf_msg_push_data() returned ENOMEM. This was wrong because we are most probably not out of memory and actually do not need any additional memory. Fixes: 6fff607e2f14b ("bpf: sk_msg program helper bpf_msg_push_data") Signed-off-by: Felix Maurer Signed-off-by: Daniel Borkmann Acked-by: Yonghong Song Acked-by: John Fastabend Link: https://lore.kernel.org/bpf/df69012695c7094ccb1943ca02b4920db3537466.1644421921.git.fmaurer@redhat.com --- net/core/filter.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/core/filter.c b/net/core/filter.c index 4603b7cd3cd17e..9eb785842258ab 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -2710,6 +2710,9 @@ BPF_CALL_4(bpf_msg_push_data, struct sk_msg *, msg, u32, start, if (unlikely(flags)) return -EINVAL; + if (unlikely(len == 0)) + return 0; + /* First find the starting scatterlist element */ i = msg->sg.start; do { From a12821d5e012a42673f6fe521971f193441d8aa4 Mon Sep 17 00:00:00 2001 From: Pankaj Raghav Date: Fri, 11 Feb 2022 10:34:25 +0100 Subject: [PATCH 118/493] block: Add handling for zone append command in blk_complete_request Zone append command needs special handling to update the bi_sector field in the bio struct with the actual position of the data in the device. It is stored in __sector field of the request struct. Fixes: 5581a5ddfe8d ("block: add completion handler for fast path") Signed-off-by: Pankaj Raghav Reviewed-by: Christoph Hellwig Tested-by: Adam Manzanares Reviewed-by: Johannes Thumshirn Link: https://lore.kernel.org/r/20220211093425.43262-2-p.raghav@samsung.com Signed-off-by: Jens Axboe --- block/blk-mq.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/block/blk-mq.c b/block/blk-mq.c index 1adfe4824ef5e2..d69ca91fbc8b12 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -736,6 +736,10 @@ static void blk_complete_request(struct request *req) /* Completion has already been traced */ bio_clear_flag(bio, BIO_TRACE_COMPLETION); + + if (req_op(req) == REQ_OP_ZONE_APPEND) + bio->bi_iter.bi_sector = req->__sector; + if (!is_flush) bio_endio(bio); bio = next; From 59f39bfa6553d598cb22f694d45e89547f420d85 Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Wed, 13 Oct 2021 10:36:54 -0400 Subject: [PATCH 119/493] drm/cma-helper: Set VM_DONTEXPAND for mmap drm_gem_cma_mmap() cannot assume every implementation of dma_mmap_wc() will end up calling remap_pfn_range() (which happens to set the relevant vma flag, among others), so in order to make sure expectations around VM_DONTEXPAND are met, let it explicitly set the flag like most other GEM mmap implementations do. This avoids repeated warnings on a small minority of systems where the display is behind an IOMMU, and has a simple driver which does not override drm_gem_cma_default_funcs. Arm hdlcd is an in-tree affected driver. Out-of-tree, the Apple DCP driver is affected; this fix is required for DCP to be mainlined. [Alyssa: Update commit message.] Fixes: c40069cb7bd6 ("drm: add mmap() to drm_gem_object_funcs") Acked-by: Daniel Vetter Signed-off-by: Robin Murphy Signed-off-by: Alyssa Rosenzweig Link: https://patchwork.freedesktop.org/patch/msgid/20211013143654.39031-1-alyssa@rosenzweig.io --- drivers/gpu/drm/drm_gem_cma_helper.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/drm_gem_cma_helper.c b/drivers/gpu/drm/drm_gem_cma_helper.c index cefd0cbf9debb8..dc275c466c9cf4 100644 --- a/drivers/gpu/drm/drm_gem_cma_helper.c +++ b/drivers/gpu/drm/drm_gem_cma_helper.c @@ -512,6 +512,7 @@ int drm_gem_cma_mmap(struct drm_gem_cma_object *cma_obj, struct vm_area_struct * */ vma->vm_pgoff -= drm_vma_node_start(&obj->vma_node); vma->vm_flags &= ~VM_PFNMAP; + vma->vm_flags |= VM_DONTEXPAND; if (cma_obj->map_noncoherent) { vma->vm_page_prot = vm_get_page_prot(vma->vm_flags); From a7e793a867ae312cecdeb6f06cceff98263e75dd Mon Sep 17 00:00:00 2001 From: Muhammad Usama Anjum Date: Thu, 10 Feb 2022 22:13:23 +0500 Subject: [PATCH 120/493] selftests/exec: Add non-regular to TEST_GEN_PROGS non-regular file needs to be compiled and then copied to the output directory. Remove it from TEST_PROGS and add it to TEST_GEN_PROGS. This removes error thrown by rsync when non-regular object isn't found: rsync: [sender] link_stat "/linux/tools/testing/selftests/exec/non-regular" failed: No such file or directory (2) rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1333) [sender=3.2.3] Fixes: 0f71241a8e32 ("selftests/exec: add file type errno tests") Reported-by: "kernelci.org bot" Signed-off-by: Muhammad Usama Anjum Reviewed-by: Shuah Khan Reviewed-by: Kees Cook Signed-off-by: Shuah Khan --- tools/testing/selftests/exec/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/exec/Makefile b/tools/testing/selftests/exec/Makefile index 12c5e27d32c166..2d7fca446c7f7b 100644 --- a/tools/testing/selftests/exec/Makefile +++ b/tools/testing/selftests/exec/Makefile @@ -3,8 +3,8 @@ CFLAGS = -Wall CFLAGS += -Wno-nonnull CFLAGS += -D_GNU_SOURCE -TEST_PROGS := binfmt_script non-regular -TEST_GEN_PROGS := execveat load_address_4096 load_address_2097152 load_address_16777216 +TEST_PROGS := binfmt_script +TEST_GEN_PROGS := execveat load_address_4096 load_address_2097152 load_address_16777216 non-regular TEST_GEN_FILES := execveat.symlink execveat.denatured script subdir # Makefile is a run-time dependency, since it's accessed by the execveat test TEST_FILES := Makefile From a0d48505a1d68e27220369e2dd1e3573a2f362d2 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Thu, 3 Feb 2022 18:47:00 +0200 Subject: [PATCH 121/493] i2c: qcom-cci: don't delete an unregistered adapter If i2c_add_adapter() fails to add an I2C adapter found on QCOM CCI controller, on error path i2c_del_adapter() is still called. Fortunately there is a sanity check in the I2C core, so the only visible implication is a printed debug level message: i2c-core: attempting to delete unregistered adapter [Qualcomm-CCI] Nevertheless it would be reasonable to correct the probe error path. Fixes: e517526195de ("i2c: Add Qualcomm CCI I2C driver") Signed-off-by: Vladimir Zapolskiy Reviewed-by: Robert Foss Reviewed-by: Bjorn Andersson Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-qcom-cci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-qcom-cci.c b/drivers/i2c/busses/i2c-qcom-cci.c index c1de8eb66169f9..fd4260d185772d 100644 --- a/drivers/i2c/busses/i2c-qcom-cci.c +++ b/drivers/i2c/busses/i2c-qcom-cci.c @@ -655,7 +655,7 @@ static int cci_probe(struct platform_device *pdev) return 0; error_i2c: - for (; i >= 0; i--) { + for (--i ; i >= 0; i--) { if (cci->master[i].cci) i2c_del_adapter(&cci->master[i].adap); } From 02a4a69667a2ad32f3b52ca906f19628fbdd8a01 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Thu, 3 Feb 2022 18:47:03 +0200 Subject: [PATCH 122/493] i2c: qcom-cci: don't put a device tree node before i2c_add_adapter() There is a minor chance for a race, if a pointer to an i2c-bus subnode is stored and then reused after releasing its reference, and it would be sufficient to get one more reference under a loop over children subnodes. Fixes: e517526195de ("i2c: Add Qualcomm CCI I2C driver") Signed-off-by: Vladimir Zapolskiy Reviewed-by: Robert Foss Reviewed-by: Bjorn Andersson Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-qcom-cci.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/i2c-qcom-cci.c b/drivers/i2c/busses/i2c-qcom-cci.c index fd4260d185772d..cf54f1cb4c57a5 100644 --- a/drivers/i2c/busses/i2c-qcom-cci.c +++ b/drivers/i2c/busses/i2c-qcom-cci.c @@ -558,7 +558,7 @@ static int cci_probe(struct platform_device *pdev) cci->master[idx].adap.quirks = &cci->data->quirks; cci->master[idx].adap.algo = &cci_algo; cci->master[idx].adap.dev.parent = dev; - cci->master[idx].adap.dev.of_node = child; + cci->master[idx].adap.dev.of_node = of_node_get(child); cci->master[idx].master = idx; cci->master[idx].cci = cci; @@ -643,8 +643,10 @@ static int cci_probe(struct platform_device *pdev) continue; ret = i2c_add_adapter(&cci->master[i].adap); - if (ret < 0) + if (ret < 0) { + of_node_put(cci->master[i].adap.dev.of_node); goto error_i2c; + } } pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC); @@ -656,8 +658,10 @@ static int cci_probe(struct platform_device *pdev) error_i2c: for (--i ; i >= 0; i--) { - if (cci->master[i].cci) + if (cci->master[i].cci) { i2c_del_adapter(&cci->master[i].adap); + of_node_put(cci->master[i].adap.dev.of_node); + } } error: disable_irq(cci->irq); @@ -673,8 +677,10 @@ static int cci_remove(struct platform_device *pdev) int i; for (i = 0; i < cci->data->num_masters; i++) { - if (cci->master[i].cci) + if (cci->master[i].cci) { i2c_del_adapter(&cci->master[i].adap); + of_node_put(cci->master[i].adap.dev.of_node); + } cci_halt(cci, i); } From 0316dbb9a017d3231f86e0188376f067ec26a59c Mon Sep 17 00:00:00 2001 From: Muhammad Usama Anjum Date: Thu, 10 Feb 2022 22:23:51 +0500 Subject: [PATCH 123/493] selftests: kvm: Remove absent target file There is no vmx_pi_mmio_test file. Remove it to get rid of error while creation of selftest archive: rsync: [sender] link_stat "/kselftest/kvm/x86_64/vmx_pi_mmio_test" failed: No such file or directory (2) rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1333) [sender=3.2.3] Fixes: 6a58150859fd ("selftest: KVM: Add intra host migration tests") Reported-by: "kernelci.org bot" Signed-off-by: Muhammad Usama Anjum Message-Id: <20220210172352.1317554-1-usama.anjum@collabora.com> Signed-off-by: Paolo Bonzini --- tools/testing/selftests/kvm/Makefile | 1 - 1 file changed, 1 deletion(-) diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile index 0e4926bc9a58df..17c3f0749f0571 100644 --- a/tools/testing/selftests/kvm/Makefile +++ b/tools/testing/selftests/kvm/Makefile @@ -82,7 +82,6 @@ TEST_GEN_PROGS_x86_64 += x86_64/tsc_msrs_test TEST_GEN_PROGS_x86_64 += x86_64/vmx_pmu_msrs_test TEST_GEN_PROGS_x86_64 += x86_64/xen_shinfo_test TEST_GEN_PROGS_x86_64 += x86_64/xen_vmcall_test -TEST_GEN_PROGS_x86_64 += x86_64/vmx_pi_mmio_test TEST_GEN_PROGS_x86_64 += x86_64/sev_migrate_tests TEST_GEN_PROGS_x86_64 += x86_64/amx_test TEST_GEN_PROGS_x86_64 += access_tracking_perf_test From 0a5f784273aad41a22963fc8b818ead3c892c97a Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Tue, 8 Feb 2022 06:45:16 -0500 Subject: [PATCH 124/493] KVM: SVM: extract avic_ring_doorbell The check on the current CPU adds an extra level of indentation to svm_deliver_avic_intr and conflates documentation on what happens if the vCPU exits (of interest to svm_deliver_avic_intr) and migrates (only of interest to avic_ring_doorbell, which calls get/put_cpu()). Extract the wrmsr to a separate function and rewrite the comment in svm_deliver_avic_intr(). Co-developed-by: Paolo Bonzini Signed-off-by: Paolo Bonzini Signed-off-by: Maxim Levitsky Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm/avic.c | 31 ++++++++++++++++++++----------- 1 file changed, 20 insertions(+), 11 deletions(-) diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c index 3f9b48732aea68..242cb220893ae7 100644 --- a/arch/x86/kvm/svm/avic.c +++ b/arch/x86/kvm/svm/avic.c @@ -269,6 +269,22 @@ static int avic_init_backing_page(struct kvm_vcpu *vcpu) return 0; } +static void avic_ring_doorbell(struct kvm_vcpu *vcpu) +{ + /* + * Note, the vCPU could get migrated to a different pCPU at any point, + * which could result in signalling the wrong/previous pCPU. But if + * that happens the vCPU is guaranteed to do a VMRUN (after being + * migrated) and thus will process pending interrupts, i.e. a doorbell + * is not needed (and the spurious one is harmless). + */ + int cpu = READ_ONCE(vcpu->cpu); + + if (cpu != get_cpu()) + wrmsrl(MSR_AMD64_SVM_AVIC_DOORBELL, kvm_cpu_get_apicid(cpu)); + put_cpu(); +} + static void avic_kick_target_vcpus(struct kvm *kvm, struct kvm_lapic *source, u32 icrl, u32 icrh) { @@ -669,19 +685,12 @@ int svm_deliver_avic_intr(struct kvm_vcpu *vcpu, int vec) * automatically process AVIC interrupts at VMRUN. */ if (vcpu->mode == IN_GUEST_MODE) { - int cpu = READ_ONCE(vcpu->cpu); - /* - * Note, the vCPU could get migrated to a different pCPU at any - * point, which could result in signalling the wrong/previous - * pCPU. But if that happens the vCPU is guaranteed to do a - * VMRUN (after being migrated) and thus will process pending - * interrupts, i.e. a doorbell is not needed (and the spurious - * one is harmless). + * Signal the doorbell to tell hardware to inject the IRQ. If + * the vCPU exits the guest before the doorbell chimes, hardware + * will automatically process AVIC interrupts at the next VMRUN. */ - if (cpu != get_cpu()) - wrmsrl(MSR_AMD64_SVM_AVIC_DOORBELL, kvm_cpu_get_apicid(cpu)); - put_cpu(); + avic_ring_doorbell(vcpu); } else { /* * Wake the vCPU if it was blocking. KVM will then detect the From 30811174f0dbe17fd58eba5c22c50292c083c75b Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Tue, 8 Feb 2022 06:57:07 -0500 Subject: [PATCH 125/493] KVM: SVM: set IRR in svm_deliver_interrupt SVM has to set IRR for both the AVIC and the software-LAPIC case, so pull it up to the common function that handles both configurations. Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm/avic.c | 2 -- arch/x86/kvm/svm/svm.c | 2 +- 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c index 242cb220893ae7..2b2932f04411fd 100644 --- a/arch/x86/kvm/svm/avic.c +++ b/arch/x86/kvm/svm/avic.c @@ -668,8 +668,6 @@ int svm_deliver_avic_intr(struct kvm_vcpu *vcpu, int vec) if (!vcpu->arch.apicv_active) return -1; - kvm_lapic_set_irr(vec, vcpu->arch.apic); - /* * Pairs with the smp_mb_*() after setting vcpu->guest_mode in * vcpu_enter_guest() to ensure the write to the vIRR is ordered before diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c index 52e4130110f3f8..cd769ff8af165b 100644 --- a/arch/x86/kvm/svm/svm.c +++ b/arch/x86/kvm/svm/svm.c @@ -3304,8 +3304,8 @@ static void svm_deliver_interrupt(struct kvm_lapic *apic, int delivery_mode, { struct kvm_vcpu *vcpu = apic->vcpu; + kvm_lapic_set_irr(vector, apic); if (svm_deliver_avic_intr(vcpu, vector)) { - kvm_lapic_set_irr(vector, apic); kvm_make_request(KVM_REQ_EVENT, vcpu); kvm_vcpu_kick(vcpu); } else { From 66fa226c131fb89287f8f7d004a46e39a859fbf6 Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Tue, 8 Feb 2022 06:48:42 -0500 Subject: [PATCH 126/493] KVM: SVM: fix race between interrupt delivery and AVIC inhibition If svm_deliver_avic_intr is called just after the target vcpu's AVIC got inhibited, it might read a stale value of vcpu->arch.apicv_active which can lead to the target vCPU not noticing the interrupt. To fix this use load-acquire/store-release so that, if the target vCPU is IN_GUEST_MODE, we're guaranteed to see a previous disabling of the AVIC. If AVIC has been disabled in the meanwhile, proceed with the KVM_REQ_EVENT-based delivery. Incomplete IPI vmexit has the same races as svm_deliver_avic_intr, and in fact it can be handled in exactly the same way; the only difference lies in who has set IRR, whether svm_deliver_interrupt or the processor. Therefore, svm_complete_interrupt_delivery can be used to fix incomplete IPI vmexits as well. Co-developed-by: Paolo Bonzini Signed-off-by: Paolo Bonzini Signed-off-by: Maxim Levitsky Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm/avic.c | 48 +++++++---------------------------------- arch/x86/kvm/svm/svm.c | 48 +++++++++++++++++++++++++++++++++++------ arch/x86/kvm/svm/svm.h | 4 +++- arch/x86/kvm/x86.c | 4 +++- 4 files changed, 55 insertions(+), 49 deletions(-) diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c index 2b2932f04411fd..fb3e2079133886 100644 --- a/arch/x86/kvm/svm/avic.c +++ b/arch/x86/kvm/svm/avic.c @@ -269,7 +269,7 @@ static int avic_init_backing_page(struct kvm_vcpu *vcpu) return 0; } -static void avic_ring_doorbell(struct kvm_vcpu *vcpu) +void avic_ring_doorbell(struct kvm_vcpu *vcpu) { /* * Note, the vCPU could get migrated to a different pCPU at any point, @@ -300,8 +300,13 @@ static void avic_kick_target_vcpus(struct kvm *kvm, struct kvm_lapic *source, kvm_for_each_vcpu(i, vcpu, kvm) { if (kvm_apic_match_dest(vcpu, source, icrl & APIC_SHORT_MASK, GET_APIC_DEST_FIELD(icrh), - icrl & APIC_DEST_MASK)) - kvm_vcpu_wake_up(vcpu); + icrl & APIC_DEST_MASK)) { + vcpu->arch.apic->irr_pending = true; + svm_complete_interrupt_delivery(vcpu, + icrl & APIC_MODE_MASK, + icrl & APIC_INT_LEVELTRIG, + icrl & APIC_VECTOR_MASK); + } } } @@ -663,43 +668,6 @@ void svm_load_eoi_exitmap(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap) return; } -int svm_deliver_avic_intr(struct kvm_vcpu *vcpu, int vec) -{ - if (!vcpu->arch.apicv_active) - return -1; - - /* - * Pairs with the smp_mb_*() after setting vcpu->guest_mode in - * vcpu_enter_guest() to ensure the write to the vIRR is ordered before - * the read of guest_mode, which guarantees that either VMRUN will see - * and process the new vIRR entry, or that the below code will signal - * the doorbell if the vCPU is already running in the guest. - */ - smp_mb__after_atomic(); - - /* - * Signal the doorbell to tell hardware to inject the IRQ if the vCPU - * is in the guest. If the vCPU is not in the guest, hardware will - * automatically process AVIC interrupts at VMRUN. - */ - if (vcpu->mode == IN_GUEST_MODE) { - /* - * Signal the doorbell to tell hardware to inject the IRQ. If - * the vCPU exits the guest before the doorbell chimes, hardware - * will automatically process AVIC interrupts at the next VMRUN. - */ - avic_ring_doorbell(vcpu); - } else { - /* - * Wake the vCPU if it was blocking. KVM will then detect the - * pending IRQ when checking if the vCPU has a wake event. - */ - kvm_vcpu_wake_up(vcpu); - } - - return 0; -} - bool svm_dy_apicv_has_pending_interrupt(struct kvm_vcpu *vcpu) { return false; diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c index cd769ff8af165b..821edf664e7a12 100644 --- a/arch/x86/kvm/svm/svm.c +++ b/arch/x86/kvm/svm/svm.c @@ -3299,21 +3299,55 @@ static void svm_set_irq(struct kvm_vcpu *vcpu) SVM_EVTINJ_VALID | SVM_EVTINJ_TYPE_INTR; } -static void svm_deliver_interrupt(struct kvm_lapic *apic, int delivery_mode, - int trig_mode, int vector) +void svm_complete_interrupt_delivery(struct kvm_vcpu *vcpu, int delivery_mode, + int trig_mode, int vector) { - struct kvm_vcpu *vcpu = apic->vcpu; + /* + * vcpu->arch.apicv_active must be read after vcpu->mode. + * Pairs with smp_store_release in vcpu_enter_guest. + */ + bool in_guest_mode = (smp_load_acquire(&vcpu->mode) == IN_GUEST_MODE); - kvm_lapic_set_irr(vector, apic); - if (svm_deliver_avic_intr(vcpu, vector)) { + if (!READ_ONCE(vcpu->arch.apicv_active)) { + /* Process the interrupt via inject_pending_event */ kvm_make_request(KVM_REQ_EVENT, vcpu); kvm_vcpu_kick(vcpu); + return; + } + + trace_kvm_apicv_accept_irq(vcpu->vcpu_id, delivery_mode, trig_mode, vector); + if (in_guest_mode) { + /* + * Signal the doorbell to tell hardware to inject the IRQ. If + * the vCPU exits the guest before the doorbell chimes, hardware + * will automatically process AVIC interrupts at the next VMRUN. + */ + avic_ring_doorbell(vcpu); } else { - trace_kvm_apicv_accept_irq(vcpu->vcpu_id, delivery_mode, - trig_mode, vector); + /* + * Wake the vCPU if it was blocking. KVM will then detect the + * pending IRQ when checking if the vCPU has a wake event. + */ + kvm_vcpu_wake_up(vcpu); } } +static void svm_deliver_interrupt(struct kvm_lapic *apic, int delivery_mode, + int trig_mode, int vector) +{ + kvm_lapic_set_irr(vector, apic); + + /* + * Pairs with the smp_mb_*() after setting vcpu->guest_mode in + * vcpu_enter_guest() to ensure the write to the vIRR is ordered before + * the read of guest_mode. This guarantees that either VMRUN will see + * and process the new vIRR entry, or that svm_complete_interrupt_delivery + * will signal the doorbell if the CPU has already entered the guest. + */ + smp_mb__after_atomic(); + svm_complete_interrupt_delivery(apic->vcpu, delivery_mode, trig_mode, vector); +} + static void svm_update_cr8_intercept(struct kvm_vcpu *vcpu, int tpr, int irr) { struct vcpu_svm *svm = to_svm(vcpu); diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h index 8cc45f27fcbd1b..fa98d6844728fa 100644 --- a/arch/x86/kvm/svm/svm.h +++ b/arch/x86/kvm/svm/svm.h @@ -489,6 +489,8 @@ void svm_set_gif(struct vcpu_svm *svm, bool value); int svm_invoke_exit_handler(struct kvm_vcpu *vcpu, u64 exit_code); void set_msr_interception(struct kvm_vcpu *vcpu, u32 *msrpm, u32 msr, int read, int write); +void svm_complete_interrupt_delivery(struct kvm_vcpu *vcpu, int delivery_mode, + int trig_mode, int vec); /* nested.c */ @@ -572,12 +574,12 @@ bool svm_check_apicv_inhibit_reasons(ulong bit); void svm_load_eoi_exitmap(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap); void svm_hwapic_irr_update(struct kvm_vcpu *vcpu, int max_irr); void svm_hwapic_isr_update(struct kvm_vcpu *vcpu, int max_isr); -int svm_deliver_avic_intr(struct kvm_vcpu *vcpu, int vec); bool svm_dy_apicv_has_pending_interrupt(struct kvm_vcpu *vcpu); int svm_update_pi_irte(struct kvm *kvm, unsigned int host_irq, uint32_t guest_irq, bool set); void avic_vcpu_blocking(struct kvm_vcpu *vcpu); void avic_vcpu_unblocking(struct kvm_vcpu *vcpu); +void avic_ring_doorbell(struct kvm_vcpu *vcpu); /* sev.c */ diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 7131d735b1ef3f..641044db415dee 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -9983,7 +9983,9 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu) * result in virtual interrupt delivery. */ local_irq_disable(); - vcpu->mode = IN_GUEST_MODE; + + /* Store vcpu->apicv_active before vcpu->mode. */ + smp_store_release(&vcpu->mode, IN_GUEST_MODE); srcu_read_unlock(&vcpu->kvm->srcu, vcpu->srcu_idx); From f444578d727a0ca4a72b19cd4a1d7da9f1fb99fe Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 10 Jan 2022 16:50:07 +0100 Subject: [PATCH 127/493] power: supply: bq256xx: Handle OOM correctly Since we now return a pointer to an allocated object we need to account for memory allocation failure in a separate error path. Fixes: 25fd330370ac ("power: supply_core: Pass pointer to battery info") Reported-by: Dan Carpenter Signed-off-by: Linus Walleij Signed-off-by: Sebastian Reichel --- drivers/power/supply/bq256xx_charger.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/power/supply/bq256xx_charger.c b/drivers/power/supply/bq256xx_charger.c index b274942dc46a38..01ad84fd147c8a 100644 --- a/drivers/power/supply/bq256xx_charger.c +++ b/drivers/power/supply/bq256xx_charger.c @@ -1523,6 +1523,9 @@ static int bq256xx_hw_init(struct bq256xx_device *bq) BQ256XX_WDT_BIT_SHIFT); ret = power_supply_get_battery_info(bq->charger, &bat_info); + if (ret == -ENOMEM) + return ret; + if (ret) { dev_warn(bq->dev, "battery info missing, default values will be applied\n"); From a8abb0c3dc1e28454851a00f8b7333d9695d566c Mon Sep 17 00:00:00 2001 From: Kumar Kartikeya Dwivedi Date: Wed, 9 Feb 2022 12:33:23 +0530 Subject: [PATCH 128/493] bpf: Fix crash due to incorrect copy_map_value When both bpf_spin_lock and bpf_timer are present in a BPF map value, copy_map_value needs to skirt both objects when copying a value into and out of the map. However, the current code does not set both s_off and t_off in copy_map_value, which leads to a crash when e.g. bpf_spin_lock is placed in map value with bpf_timer, as bpf_map_update_elem call will be able to overwrite the other timer object. When the issue is not fixed, an overwriting can produce the following splat: [root@(none) bpf]# ./test_progs -t timer_crash [ 15.930339] bpf_testmod: loading out-of-tree module taints kernel. [ 16.037849] ================================================================== [ 16.038458] BUG: KASAN: user-memory-access in __pv_queued_spin_lock_slowpath+0x32b/0x520 [ 16.038944] Write of size 8 at addr 0000000000043ec0 by task test_progs/325 [ 16.039399] [ 16.039514] CPU: 0 PID: 325 Comm: test_progs Tainted: G OE 5.16.0+ #278 [ 16.039983] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.15.0-1 04/01/2014 [ 16.040485] Call Trace: [ 16.040645] [ 16.040805] dump_stack_lvl+0x59/0x73 [ 16.041069] ? __pv_queued_spin_lock_slowpath+0x32b/0x520 [ 16.041427] kasan_report.cold+0x116/0x11b [ 16.041673] ? __pv_queued_spin_lock_slowpath+0x32b/0x520 [ 16.042040] __pv_queued_spin_lock_slowpath+0x32b/0x520 [ 16.042328] ? memcpy+0x39/0x60 [ 16.042552] ? pv_hash+0xd0/0xd0 [ 16.042785] ? lockdep_hardirqs_off+0x95/0xd0 [ 16.043079] __bpf_spin_lock_irqsave+0xdf/0xf0 [ 16.043366] ? bpf_get_current_comm+0x50/0x50 [ 16.043608] ? jhash+0x11a/0x270 [ 16.043848] bpf_timer_cancel+0x34/0xe0 [ 16.044119] bpf_prog_c4ea1c0f7449940d_sys_enter+0x7c/0x81 [ 16.044500] bpf_trampoline_6442477838_0+0x36/0x1000 [ 16.044836] __x64_sys_nanosleep+0x5/0x140 [ 16.045119] do_syscall_64+0x59/0x80 [ 16.045377] ? lock_is_held_type+0xe4/0x140 [ 16.045670] ? irqentry_exit_to_user_mode+0xa/0x40 [ 16.046001] ? mark_held_locks+0x24/0x90 [ 16.046287] ? asm_exc_page_fault+0x1e/0x30 [ 16.046569] ? asm_exc_page_fault+0x8/0x30 [ 16.046851] ? lockdep_hardirqs_on+0x7e/0x100 [ 16.047137] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 16.047405] RIP: 0033:0x7f9e4831718d [ 16.047602] Code: b4 0c 00 0f 05 eb a9 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 6c 0c 00 f7 d8 64 89 01 48 [ 16.048764] RSP: 002b:00007fff488086b8 EFLAGS: 00000206 ORIG_RAX: 0000000000000023 [ 16.049275] RAX: ffffffffffffffda RBX: 00007f9e48683740 RCX: 00007f9e4831718d [ 16.049747] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007fff488086d0 [ 16.050225] RBP: 00007fff488086f0 R08: 00007fff488085d7 R09: 00007f9e4cb594a0 [ 16.050648] R10: 0000000000000000 R11: 0000000000000206 R12: 00007f9e484cde30 [ 16.051124] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 16.051608] [ 16.051762] ================================================================== Fixes: 68134668c17f ("bpf: Add map side support for bpf timers.") Signed-off-by: Kumar Kartikeya Dwivedi Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20220209070324.1093182-2-memxor@gmail.com --- include/linux/bpf.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/linux/bpf.h b/include/linux/bpf.h index fa517ae604ad2f..31a83449808b53 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -224,7 +224,8 @@ static inline void copy_map_value(struct bpf_map *map, void *dst, void *src) if (unlikely(map_value_has_spin_lock(map))) { s_off = map->spin_lock_off; s_sz = sizeof(struct bpf_spin_lock); - } else if (unlikely(map_value_has_timer(map))) { + } + if (unlikely(map_value_has_timer(map))) { t_off = map->timer_off; t_sz = sizeof(struct bpf_timer); } From a7e75016a0753c24d6c995bc02501ae35368e333 Mon Sep 17 00:00:00 2001 From: Kumar Kartikeya Dwivedi Date: Wed, 9 Feb 2022 12:33:24 +0530 Subject: [PATCH 129/493] selftests/bpf: Add test for bpf_timer overwriting crash Add a test that validates that timer value is not overwritten when doing a copy_map_value call in the kernel. Without the prior fix, this test triggers a crash. Signed-off-by: Kumar Kartikeya Dwivedi Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20220209070324.1093182-3-memxor@gmail.com --- .../selftests/bpf/prog_tests/timer_crash.c | 32 +++++++++++ .../testing/selftests/bpf/progs/timer_crash.c | 54 +++++++++++++++++++ 2 files changed, 86 insertions(+) create mode 100644 tools/testing/selftests/bpf/prog_tests/timer_crash.c create mode 100644 tools/testing/selftests/bpf/progs/timer_crash.c diff --git a/tools/testing/selftests/bpf/prog_tests/timer_crash.c b/tools/testing/selftests/bpf/prog_tests/timer_crash.c new file mode 100644 index 00000000000000..f74b82305da8c8 --- /dev/null +++ b/tools/testing/selftests/bpf/prog_tests/timer_crash.c @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include "timer_crash.skel.h" + +enum { + MODE_ARRAY, + MODE_HASH, +}; + +static void test_timer_crash_mode(int mode) +{ + struct timer_crash *skel; + + skel = timer_crash__open_and_load(); + if (!ASSERT_OK_PTR(skel, "timer_crash__open_and_load")) + return; + skel->bss->pid = getpid(); + skel->bss->crash_map = mode; + if (!ASSERT_OK(timer_crash__attach(skel), "timer_crash__attach")) + goto end; + usleep(1); +end: + timer_crash__destroy(skel); +} + +void test_timer_crash(void) +{ + if (test__start_subtest("array")) + test_timer_crash_mode(MODE_ARRAY); + if (test__start_subtest("hash")) + test_timer_crash_mode(MODE_HASH); +} diff --git a/tools/testing/selftests/bpf/progs/timer_crash.c b/tools/testing/selftests/bpf/progs/timer_crash.c new file mode 100644 index 00000000000000..f8f7944e70dae4 --- /dev/null +++ b/tools/testing/selftests/bpf/progs/timer_crash.c @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include +#include +#include + +struct map_elem { + struct bpf_timer timer; + struct bpf_spin_lock lock; +}; + +struct { + __uint(type, BPF_MAP_TYPE_ARRAY); + __uint(max_entries, 1); + __type(key, int); + __type(value, struct map_elem); +} amap SEC(".maps"); + +struct { + __uint(type, BPF_MAP_TYPE_HASH); + __uint(max_entries, 1); + __type(key, int); + __type(value, struct map_elem); +} hmap SEC(".maps"); + +int pid = 0; +int crash_map = 0; /* 0 for amap, 1 for hmap */ + +SEC("fentry/do_nanosleep") +int sys_enter(void *ctx) +{ + struct map_elem *e, value = {}; + void *map = crash_map ? (void *)&hmap : (void *)&amap; + + if (bpf_get_current_task_btf()->tgid != pid) + return 0; + + *(void **)&value = (void *)0xdeadcaf3; + + bpf_map_update_elem(map, &(int){0}, &value, 0); + /* For array map, doing bpf_map_update_elem will do a + * check_and_free_timer_in_array, which will trigger the crash if timer + * pointer was overwritten, for hmap we need to use bpf_timer_cancel. + */ + if (crash_map == 1) { + e = bpf_map_lookup_elem(map, &(int){0}); + if (!e) + return 0; + bpf_timer_cancel(&e->timer); + } + return 0; +} + +char _license[] SEC("license") = "GPL"; From 3bd916ee0ecbbdd902fc24845f2fef332b2a310c Mon Sep 17 00:00:00 2001 From: Yonghong Song Date: Fri, 11 Feb 2022 11:49:48 -0800 Subject: [PATCH 130/493] bpf: Emit bpf_timer in vmlinux BTF Currently the following code in check_and_init_map_value() *(struct bpf_timer *)(dst + map->timer_off) = (struct bpf_timer){}; can help generate bpf_timer definition in vmlinuxBTF. But the code above may not zero the whole structure due to anonymour members and that code will be replaced by memset in the subsequent patch and bpf_timer definition will disappear from vmlinuxBTF. Let us emit the type explicitly so bpf program can continue to use it from vmlinux.h. Signed-off-by: Yonghong Song Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20220211194948.3141529-1-yhs@fb.com --- kernel/bpf/helpers.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/bpf/helpers.c b/kernel/bpf/helpers.c index 01cfdf40c838c0..55c084251fabf5 100644 --- a/kernel/bpf/helpers.c +++ b/kernel/bpf/helpers.c @@ -2,6 +2,7 @@ /* Copyright (c) 2011-2014 PLUMgrid, http://plumgrid.com */ #include +#include #include #include #include @@ -1075,6 +1076,7 @@ static enum hrtimer_restart bpf_timer_cb(struct hrtimer *hrtimer) void *key; u32 idx; + BTF_TYPE_EMIT(struct bpf_timer); callback_fn = rcu_dereference_check(t->callback_fn, rcu_read_lock_bh_held()); if (!callback_fn) goto out; From 5eaed6eedbe9612f642ad2b880f961d1c6c8ec2b Mon Sep 17 00:00:00 2001 From: Yonghong Song Date: Fri, 11 Feb 2022 11:49:53 -0800 Subject: [PATCH 131/493] bpf: Fix a bpf_timer initialization issue MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The patch in [1] intends to fix a bpf_timer related issue, but the fix caused existing 'timer' selftest to fail with hang or some random errors. After some debug, I found an issue with check_and_init_map_value() in the hashtab.c. More specifically, in hashtab.c, we have code l_new = bpf_map_kmalloc_node(&htab->map, ...) check_and_init_map_value(&htab->map, l_new...) Note that bpf_map_kmalloc_node() does not do initialization so l_new contains random value. The function check_and_init_map_value() intends to zero the bpf_spin_lock and bpf_timer if they exist in the map. But I found bpf_spin_lock is zero'ed but bpf_timer is not zero'ed. With [1], later copy_map_value() skips copying of bpf_spin_lock and bpf_timer. The non-zero bpf_timer caused random failures for 'timer' selftest. Without [1], for both bpf_spin_lock and bpf_timer case, bpf_timer will be zero'ed, so 'timer' self test is okay. For check_and_init_map_value(), why bpf_spin_lock is zero'ed properly while bpf_timer not. In bpf uapi header, we have struct bpf_spin_lock { __u32 val; }; struct bpf_timer { __u64 :64; __u64 :64; } __attribute__((aligned(8))); The initialization code: *(struct bpf_spin_lock *)(dst + map->spin_lock_off) = (struct bpf_spin_lock){}; *(struct bpf_timer *)(dst + map->timer_off) = (struct bpf_timer){}; It appears the compiler has no obligation to initialize anonymous fields. For example, let us use clang with bpf target as below: $ cat t.c struct bpf_timer { unsigned long long :64; }; struct bpf_timer2 { unsigned long long a; }; void test(struct bpf_timer *t) { *t = (struct bpf_timer){}; } void test2(struct bpf_timer2 *t) { *t = (struct bpf_timer2){}; } $ clang -target bpf -O2 -c -g t.c $ llvm-objdump -d t.o ... 0000000000000000 : 0: 95 00 00 00 00 00 00 00 exit 0000000000000008 : 1: b7 02 00 00 00 00 00 00 r2 = 0 2: 7b 21 00 00 00 00 00 00 *(u64 *)(r1 + 0) = r2 3: 95 00 00 00 00 00 00 00 exit gcc11.2 does not have the above issue. But from INTERNATIONAL STANDARD ©ISO/IEC ISO/IEC 9899:201x Programming languages — C http://www.open-std.org/Jtc1/sc22/wg14/www/docs/n1547.pdf page 157: Except where explicitly stated otherwise, for the purposes of this subclause unnamed members of objects of structure and union type do not participate in initialization. Unnamed members of structure objects have indeterminate value even after initialization. To fix the problem, let use memset for bpf_timer case in check_and_init_map_value(). For consistency, memset is also used for bpf_spin_lock case. [1] https://lore.kernel.org/bpf/20220209070324.1093182-2-memxor@gmail.com/ Fixes: 68134668c17f3 ("bpf: Add map side support for bpf timers.") Signed-off-by: Yonghong Song Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20220211194953.3142152-1-yhs@fb.com --- include/linux/bpf.h | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/include/linux/bpf.h b/include/linux/bpf.h index 31a83449808b53..d0ad379d1e62a7 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -209,11 +209,9 @@ static inline bool map_value_has_timer(const struct bpf_map *map) static inline void check_and_init_map_value(struct bpf_map *map, void *dst) { if (unlikely(map_value_has_spin_lock(map))) - *(struct bpf_spin_lock *)(dst + map->spin_lock_off) = - (struct bpf_spin_lock){}; + memset(dst + map->spin_lock_off, 0, sizeof(struct bpf_spin_lock)); if (unlikely(map_value_has_timer(map))) - *(struct bpf_timer *)(dst + map->timer_off) = - (struct bpf_timer){}; + memset(dst + map->timer_off, 0, sizeof(struct bpf_timer)); } /* copy everything but bpf_spin_lock and bpf_timer. There could be one of each. */ From f10f582d28220f50099d3f561116256267821429 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 8 Feb 2022 12:54:48 -0600 Subject: [PATCH 132/493] scsi: qedi: Fix ABBA deadlock in qedi_process_tmf_resp() and qedi_process_cmd_cleanup_resp() This fixes a deadlock added with commit b40f3894e39e ("scsi: qedi: Complete TMF works before disconnect") Bug description from Jia-Ju Bai: qedi_process_tmf_resp() spin_lock(&session->back_lock); --> Line 201 (Lock A) spin_lock(&qedi_conn->tmf_work_lock); --> Line 230 (Lock B) qedi_process_cmd_cleanup_resp() spin_lock_bh(&qedi_conn->tmf_work_lock); --> Line 752 (Lock B) spin_lock_bh(&conn->session->back_lock); --> Line 784 (Lock A) When qedi_process_tmf_resp() and qedi_process_cmd_cleanup_resp() are concurrently executed, the deadlock can occur. This patch fixes the deadlock by not holding the tmf_work_lock in qedi_process_cmd_cleanup_resp while holding the back_lock. The tmf_work_lock is only needed while we remove the tmf_work from the work_list. Link: https://lore.kernel.org/r/20220208185448.6206-1-michael.christie@oracle.com Fixes: b40f3894e39e ("scsi: qedi: Complete TMF works before disconnect") Cc: Manish Rangankar Cc: Nilesh Javali Reported-by: TOTE Robot Reported-by: Jia-Ju Bai Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen --- drivers/scsi/qedi/qedi_fw.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/qedi/qedi_fw.c b/drivers/scsi/qedi/qedi_fw.c index 5916ed7662d56e..4eb89aa4a39dc0 100644 --- a/drivers/scsi/qedi/qedi_fw.c +++ b/drivers/scsi/qedi/qedi_fw.c @@ -771,11 +771,10 @@ static void qedi_process_cmd_cleanup_resp(struct qedi_ctx *qedi, qedi_cmd->list_tmf_work = NULL; } } + spin_unlock_bh(&qedi_conn->tmf_work_lock); - if (!found) { - spin_unlock_bh(&qedi_conn->tmf_work_lock); + if (!found) goto check_cleanup_reqs; - } QEDI_INFO(&qedi->dbg_ctx, QEDI_LOG_SCSI_TM, "TMF work, cqe->tid=0x%x, tmf flags=0x%x, cid=0x%x\n", @@ -806,7 +805,6 @@ static void qedi_process_cmd_cleanup_resp(struct qedi_ctx *qedi, qedi_cmd->state = CLEANUP_RECV; unlock: spin_unlock_bh(&conn->session->back_lock); - spin_unlock_bh(&qedi_conn->tmf_work_lock); wake_up_interruptible(&qedi_conn->wait_queue); return; From 06582bc86d7f48d35cd044098ca1e246e8c7c52e Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Wed, 26 Jan 2022 11:58:30 +0800 Subject: [PATCH 133/493] block: loop:use kstatfs.f_bsize of backing file to set discard granularity If backing file's filesystem has implemented ->fallocate(), we think the loop device can support discard, then pass sb->s_blocksize as discard_granularity. However, some underlying FS, such as overlayfs, doesn't set sb->s_blocksize, and causes discard_granularity to be set as zero, then the warning in __blkdev_issue_discard() is triggered. Christoph suggested to pass kstatfs.f_bsize as discard granularity, and this way is fine because kstatfs.f_bsize means 'Optimal transfer block size', which still matches with definition of discard granularity. So fix the issue by setting discard_granularity as kstatfs.f_bsize if it is available, otherwise claims discard isn't supported. Cc: Christoph Hellwig Cc: Vivek Goyal Reported-by: Pei Zhang Signed-off-by: Ming Lei Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/r/20220126035830.296465-1-ming.lei@redhat.com Signed-off-by: Jens Axboe --- drivers/block/loop.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 150012ffb387f5..19fe19eaa50e93 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -79,6 +79,7 @@ #include #include #include +#include #include "loop.h" @@ -774,8 +775,13 @@ static void loop_config_discard(struct loop_device *lo) granularity = 0; } else { + struct kstatfs sbuf; + max_discard_sectors = UINT_MAX >> 9; - granularity = inode->i_sb->s_blocksize; + if (!vfs_statfs(&file->f_path, &sbuf)) + granularity = sbuf.f_bsize; + else + max_discard_sectors = 0; } if (max_discard_sectors) { From 6bb9681a43f34f2cab4aad6e2a02da4ce54d13c5 Mon Sep 17 00:00:00 2001 From: Mans Rullgard Date: Wed, 9 Feb 2022 14:54:54 +0000 Subject: [PATCH 134/493] net: dsa: lan9303: fix reset on probe The reset input to the LAN9303 chip is active low, and devicetree gpio handles reflect this. Therefore, the gpio should be requested with an initial state of high in order for the reset signal to be asserted. Other uses of the gpio already use the correct polarity. Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303") Signed-off-by: Mans Rullgard Reviewed-by: Andrew Lunn Reviewed-by: Florian Fianelil Link: https://lore.kernel.org/r/20220209145454.19749-1-mans@mansr.com Signed-off-by: Jakub Kicinski --- drivers/net/dsa/lan9303-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c index d55784d19fa4d8..873a5588171bf3 100644 --- a/drivers/net/dsa/lan9303-core.c +++ b/drivers/net/dsa/lan9303-core.c @@ -1310,7 +1310,7 @@ static int lan9303_probe_reset_gpio(struct lan9303 *chip, struct device_node *np) { chip->reset_gpio = devm_gpiod_get_optional(chip->dev, "reset", - GPIOD_OUT_LOW); + GPIOD_OUT_HIGH); if (IS_ERR(chip->reset_gpio)) return PTR_ERR(chip->reset_gpio); From 28df029d53a2fd80c1b8674d47895648ad26dcfb Mon Sep 17 00:00:00 2001 From: Cheng Jui Wang Date: Thu, 10 Feb 2022 18:50:11 +0800 Subject: [PATCH 135/493] lockdep: Correct lock_classes index mapping A kernel exception was hit when trying to dump /proc/lockdep_chains after lockdep report "BUG: MAX_LOCKDEP_CHAIN_HLOCKS too low!": Unable to handle kernel paging request at virtual address 00054005450e05c3 ... 00054005450e05c3] address between user and kernel address ranges ... pc : [0xffffffece769b3a8] string+0x50/0x10c lr : [0xffffffece769ac88] vsnprintf+0x468/0x69c ... Call trace: string+0x50/0x10c vsnprintf+0x468/0x69c seq_printf+0x8c/0xd8 print_name+0x64/0xf4 lc_show+0xb8/0x128 seq_read_iter+0x3cc/0x5fc proc_reg_read_iter+0xdc/0x1d4 The cause of the problem is the function lock_chain_get_class() will shift lock_classes index by 1, but the index don't need to be shifted anymore since commit 01bb6f0af992 ("locking/lockdep: Change the range of class_idx in held_lock struct") already change the index to start from 0. The lock_classes[-1] located at chain_hlocks array. When printing lock_classes[-1] after the chain_hlocks entries are modified, the exception happened. The output of lockdep_chains are incorrect due to this problem too. Fixes: f611e8cf98ec ("lockdep: Take read/write status in consideration when generate chainkey") Signed-off-by: Cheng Jui Wang Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Boqun Feng Link: https://lore.kernel.org/r/20220210105011.21712-1-cheng-jui.wang@mediatek.com --- kernel/locking/lockdep.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c index 4a882f83aeb9da..f8a0212189cade 100644 --- a/kernel/locking/lockdep.c +++ b/kernel/locking/lockdep.c @@ -3462,7 +3462,7 @@ struct lock_class *lock_chain_get_class(struct lock_chain *chain, int i) u16 chain_hlock = chain_hlocks[chain->base + i]; unsigned int class_idx = chain_hlock_class_idx(chain_hlock); - return lock_classes + class_idx - 1; + return lock_classes + class_idx; } /* @@ -3530,7 +3530,7 @@ static void print_chain_keys_chain(struct lock_chain *chain) hlock_id = chain_hlocks[chain->base + i]; chain_key = print_chain_key_iteration(hlock_id, chain_key); - print_lock_name(lock_classes + chain_hlock_class_idx(hlock_id) - 1); + print_lock_name(lock_classes + chain_hlock_class_idx(hlock_id)); printk("\n"); } } From 6c342ce2239c182c2428ce5a44cb32330434ae6e Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Fri, 11 Feb 2022 09:15:52 +0800 Subject: [PATCH 136/493] mctp: serial: Cancel pending work from ndo_uninit handler We cannot do the cancel_work_sync from after the unregister_netdev, as the dev pointer is no longer valid, causing a uaf on ldisc unregister (or device close). Instead, do the cancel_work_sync from the ndo_uninit op, where the dev still exists, but the queue has stopped. Fixes: 7bd9890f3d74 ("mctp: serial: cancel tx work on ldisc close") Reported-by: Luo Likang Tested-by: Luo Likang Signed-off-by: Jeremy Kerr Link: https://lore.kernel.org/r/20220211011552.1861886-1-jk@codeconstruct.com.au Signed-off-by: Jakub Kicinski --- drivers/net/mctp/mctp-serial.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/net/mctp/mctp-serial.c b/drivers/net/mctp/mctp-serial.c index eaa6fb3224bc48..62723a7faa2d13 100644 --- a/drivers/net/mctp/mctp-serial.c +++ b/drivers/net/mctp/mctp-serial.c @@ -403,8 +403,16 @@ static void mctp_serial_tty_receive_buf(struct tty_struct *tty, mctp_serial_push(dev, c[i]); } +static void mctp_serial_uninit(struct net_device *ndev) +{ + struct mctp_serial *dev = netdev_priv(ndev); + + cancel_work_sync(&dev->tx_work); +} + static const struct net_device_ops mctp_serial_netdev_ops = { .ndo_start_xmit = mctp_serial_tx, + .ndo_uninit = mctp_serial_uninit, }; static void mctp_serial_setup(struct net_device *ndev) @@ -483,7 +491,6 @@ static void mctp_serial_close(struct tty_struct *tty) int idx = dev->idx; unregister_netdev(dev->netdev); - cancel_work_sync(&dev->tx_work); ida_free(&mctp_serial_ida, idx); } From bf8e59fd315f304eb538546e35de6dc603e4709f Mon Sep 17 00:00:00 2001 From: Gatis Peisenieks Date: Fri, 11 Feb 2022 08:51:23 +0200 Subject: [PATCH 137/493] atl1c: fix tx timeout after link flap on Mikrotik 10/25G NIC If NIC had packets in tx queue at the moment link down event happened, it could result in tx timeout when link got back up. Since device has more than one tx queue we need to reset them accordingly. Fixes: 057f4af2b171 ("atl1c: add 4 RX/TX queue support for Mikrotik 10/25G NIC") Signed-off-by: Gatis Peisenieks Link: https://lore.kernel.org/r/20220211065123.4187615-1-gatis@mikrotik.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index da595242bc13a5..f50604f3e541e5 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -900,7 +900,7 @@ static void atl1c_clean_tx_ring(struct atl1c_adapter *adapter, atl1c_clean_buffer(pdev, buffer_info); } - netdev_reset_queue(adapter->netdev); + netdev_tx_reset_queue(netdev_get_tx_queue(adapter->netdev, queue)); /* Zero out Tx-buffers */ memset(tpd_ring->desc, 0, sizeof(struct atl1c_tpd_desc) * From 143de8d97d79316590475dc2a84513c63c863ddf Mon Sep 17 00:00:00 2001 From: Hangyu Hua Date: Fri, 11 Feb 2022 12:55:10 +0800 Subject: [PATCH 138/493] tipc: fix a bit overflow in tipc_crypto_key_rcv() msg_data_sz return a 32bit value, but size is 16bit. This may lead to a bit overflow. Signed-off-by: Hangyu Hua Signed-off-by: David S. Miller --- net/tipc/crypto.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/tipc/crypto.c b/net/tipc/crypto.c index 9325479295b836..f09316a9035f41 100644 --- a/net/tipc/crypto.c +++ b/net/tipc/crypto.c @@ -2276,7 +2276,7 @@ static bool tipc_crypto_key_rcv(struct tipc_crypto *rx, struct tipc_msg *hdr) struct tipc_crypto *tx = tipc_net(rx->net)->crypto_tx; struct tipc_aead_key *skey = NULL; u16 key_gen = msg_key_gen(hdr); - u16 size = msg_data_sz(hdr); + u32 size = msg_data_sz(hdr); u8 *data = msg_data(hdr); unsigned int keylen; From 9405b5f8b20c2bfa6523a555279a0379640dc136 Mon Sep 17 00:00:00 2001 From: Steve French Date: Sat, 12 Feb 2022 01:54:14 -0600 Subject: [PATCH 139/493] smb3: fix snapshot mount option The conversion to the new API broke the snapshot mount option due to 32 vs. 64 bit type mismatch Fixes: 24e0a1eff9e2 ("cifs: switch to new mount api") Cc: stable@vger.kernel.org # 5.11+ Reported-by: Acked-by: Ronnie Sahlberg Signed-off-by: Steve French --- fs/cifs/fs_context.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/cifs/fs_context.c b/fs/cifs/fs_context.c index 7ec35f3f0a5fcb..a92e9eec521f35 100644 --- a/fs/cifs/fs_context.c +++ b/fs/cifs/fs_context.c @@ -149,7 +149,7 @@ const struct fs_parameter_spec smb3_fs_parameters[] = { fsparam_u32("echo_interval", Opt_echo_interval), fsparam_u32("max_credits", Opt_max_credits), fsparam_u32("handletimeout", Opt_handletimeout), - fsparam_u32("snapshot", Opt_snapshot), + fsparam_u64("snapshot", Opt_snapshot), fsparam_u32("max_channels", Opt_max_channels), /* Mount options which take string value */ @@ -1078,7 +1078,7 @@ static int smb3_fs_context_parse_param(struct fs_context *fc, ctx->echo_interval = result.uint_32; break; case Opt_snapshot: - ctx->snapshot_time = result.uint_32; + ctx->snapshot_time = result.uint_64; break; case Opt_max_credits: if (result.uint_32 < 20 || result.uint_32 > 60000) { From dd5a927e411836eaef44eb9b00fece615e82e242 Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Mon, 3 Jan 2022 16:50:25 +0200 Subject: [PATCH 140/493] cifs: fix set of group SID via NTSD xattrs 'setcifsacl -g ' silently fails to set the group SID on server. Actually, the bug existed since commit 438471b67963 ("CIFS: Add support for setting owner info, dos attributes, and create time"), but this fix will not apply cleanly to kernel versions <= v5.10. Fixes: 3970acf7ddb9 ("SMB3: Add support for getting and setting SACLs") Cc: stable@vger.kernel.org # 5.11+ Signed-off-by: Amir Goldstein Signed-off-by: Steve French --- fs/cifs/xattr.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/cifs/xattr.c b/fs/cifs/xattr.c index 7d8b72d67c8034..9d486fbbfbbde9 100644 --- a/fs/cifs/xattr.c +++ b/fs/cifs/xattr.c @@ -175,11 +175,13 @@ static int cifs_xattr_set(const struct xattr_handler *handler, switch (handler->flags) { case XATTR_CIFS_NTSD_FULL: aclflags = (CIFS_ACL_OWNER | + CIFS_ACL_GROUP | CIFS_ACL_DACL | CIFS_ACL_SACL); break; case XATTR_CIFS_NTSD: aclflags = (CIFS_ACL_OWNER | + CIFS_ACL_GROUP | CIFS_ACL_DACL); break; case XATTR_CIFS_ACL: From 26d3dadebbcbddfaf1d9caad42527a28a0ed28d8 Mon Sep 17 00:00:00 2001 From: Ronnie Sahlberg Date: Sat, 12 Feb 2022 08:16:20 +1000 Subject: [PATCH 141/493] cifs: do not use uninitialized data in the owner/group sid When idsfromsid is used we create a special SID for owner/group. This structure must be initialized or else the first 5 bytes of the Authority field of the SID will contain uninitialized data and thus not be a valid SID. Signed-off-by: Ronnie Sahlberg Signed-off-by: Steve French --- fs/cifs/cifsacl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c index ee3aab3dd4ac6f..5df21d63dd04e8 100644 --- a/fs/cifs/cifsacl.c +++ b/fs/cifs/cifsacl.c @@ -1297,7 +1297,7 @@ static int build_sec_desc(struct cifs_ntsd *pntsd, struct cifs_ntsd *pnntsd, if (uid_valid(uid)) { /* chown */ uid_t id; - nowner_sid_ptr = kmalloc(sizeof(struct cifs_sid), + nowner_sid_ptr = kzalloc(sizeof(struct cifs_sid), GFP_KERNEL); if (!nowner_sid_ptr) { rc = -ENOMEM; @@ -1326,7 +1326,7 @@ static int build_sec_desc(struct cifs_ntsd *pntsd, struct cifs_ntsd *pnntsd, } if (gid_valid(gid)) { /* chgrp */ gid_t id; - ngroup_sid_ptr = kmalloc(sizeof(struct cifs_sid), + ngroup_sid_ptr = kzalloc(sizeof(struct cifs_sid), GFP_KERNEL); if (!ngroup_sid_ptr) { rc = -ENOMEM; From 3d6cc9898efdfb062efb74dc18cfc700e082f5d5 Mon Sep 17 00:00:00 2001 From: Ronnie Sahlberg Date: Fri, 11 Feb 2022 02:59:15 +1000 Subject: [PATCH 142/493] cifs: fix double free race when mount fails in cifs_get_root() When cifs_get_root() fails during cifs_smb3_do_mount() we call deactivate_locked_super() which eventually will call delayed_free() which will free the context. In this situation we should not proceed to enter the out: section in cifs_smb3_do_mount() and free the same resources a second time. [Thu Feb 10 12:59:06 2022] BUG: KASAN: use-after-free in rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] Read of size 8 at addr ffff888364f4d110 by task swapper/1/0 [Thu Feb 10 12:59:06 2022] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G OE 5.17.0-rc3+ #4 [Thu Feb 10 12:59:06 2022] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.0 12/17/2019 [Thu Feb 10 12:59:06 2022] Call Trace: [Thu Feb 10 12:59:06 2022] [Thu Feb 10 12:59:06 2022] dump_stack_lvl+0x5d/0x78 [Thu Feb 10 12:59:06 2022] print_address_description.constprop.0+0x24/0x150 [Thu Feb 10 12:59:06 2022] ? rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] kasan_report.cold+0x7d/0x117 [Thu Feb 10 12:59:06 2022] ? rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] __asan_load8+0x86/0xa0 [Thu Feb 10 12:59:06 2022] rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] rcu_core+0x547/0xca0 [Thu Feb 10 12:59:06 2022] ? call_rcu+0x3c0/0x3c0 [Thu Feb 10 12:59:06 2022] ? __this_cpu_preempt_check+0x13/0x20 [Thu Feb 10 12:59:06 2022] ? lock_is_held_type+0xea/0x140 [Thu Feb 10 12:59:06 2022] rcu_core_si+0xe/0x10 [Thu Feb 10 12:59:06 2022] __do_softirq+0x1d4/0x67b [Thu Feb 10 12:59:06 2022] __irq_exit_rcu+0x100/0x150 [Thu Feb 10 12:59:06 2022] irq_exit_rcu+0xe/0x30 [Thu Feb 10 12:59:06 2022] sysvec_hyperv_stimer0+0x9d/0xc0 ... [Thu Feb 10 12:59:07 2022] Freed by task 58179: [Thu Feb 10 12:59:07 2022] kasan_save_stack+0x26/0x50 [Thu Feb 10 12:59:07 2022] kasan_set_track+0x25/0x30 [Thu Feb 10 12:59:07 2022] kasan_set_free_info+0x24/0x40 [Thu Feb 10 12:59:07 2022] ____kasan_slab_free+0x137/0x170 [Thu Feb 10 12:59:07 2022] __kasan_slab_free+0x12/0x20 [Thu Feb 10 12:59:07 2022] slab_free_freelist_hook+0xb3/0x1d0 [Thu Feb 10 12:59:07 2022] kfree+0xcd/0x520 [Thu Feb 10 12:59:07 2022] cifs_smb3_do_mount+0x149/0xbe0 [cifs] [Thu Feb 10 12:59:07 2022] smb3_get_tree+0x1a0/0x2e0 [cifs] [Thu Feb 10 12:59:07 2022] vfs_get_tree+0x52/0x140 [Thu Feb 10 12:59:07 2022] path_mount+0x635/0x10c0 [Thu Feb 10 12:59:07 2022] __x64_sys_mount+0x1bf/0x210 [Thu Feb 10 12:59:07 2022] do_syscall_64+0x5c/0xc0 [Thu Feb 10 12:59:07 2022] entry_SYSCALL_64_after_hwframe+0x44/0xae [Thu Feb 10 12:59:07 2022] Last potentially related work creation: [Thu Feb 10 12:59:07 2022] kasan_save_stack+0x26/0x50 [Thu Feb 10 12:59:07 2022] __kasan_record_aux_stack+0xb6/0xc0 [Thu Feb 10 12:59:07 2022] kasan_record_aux_stack_noalloc+0xb/0x10 [Thu Feb 10 12:59:07 2022] call_rcu+0x76/0x3c0 [Thu Feb 10 12:59:07 2022] cifs_umount+0xce/0xe0 [cifs] [Thu Feb 10 12:59:07 2022] cifs_kill_sb+0xc8/0xe0 [cifs] [Thu Feb 10 12:59:07 2022] deactivate_locked_super+0x5d/0xd0 [Thu Feb 10 12:59:07 2022] cifs_smb3_do_mount+0xab9/0xbe0 [cifs] [Thu Feb 10 12:59:07 2022] smb3_get_tree+0x1a0/0x2e0 [cifs] [Thu Feb 10 12:59:07 2022] vfs_get_tree+0x52/0x140 [Thu Feb 10 12:59:07 2022] path_mount+0x635/0x10c0 [Thu Feb 10 12:59:07 2022] __x64_sys_mount+0x1bf/0x210 [Thu Feb 10 12:59:07 2022] do_syscall_64+0x5c/0xc0 [Thu Feb 10 12:59:07 2022] entry_SYSCALL_64_after_hwframe+0x44/0xae Reported-by: Shyam Prasad N Reviewed-by: Shyam Prasad N Signed-off-by: Ronnie Sahlberg Signed-off-by: Steve French --- fs/cifs/cifsfs.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 199edac0cb59f8..082c2147868670 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -919,6 +919,7 @@ cifs_smb3_do_mount(struct file_system_type *fs_type, out_super: deactivate_locked_super(sb); + return root; out: if (cifs_sb) { kfree(cifs_sb->prepath); From b160628e9ebcdc85d0db9d7f423c26b3c7c179d0 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sun, 13 Feb 2022 22:29:25 +0100 Subject: [PATCH 143/493] parisc: Show error if wrong 32/64-bit compiler is being used It happens quite often that people use the wrong compiler to build the kernel: make ARCH=parisc -> builds the 32-bit kernel make ARCH=parisc64 -> builds the 64-bit kernel This patch adds a sanity check which errors out with an instruction how use the correct ARCH= option. Signed-off-by: Helge Deller Cc: stable@vger.kernel.org # v5.15+ --- arch/parisc/include/asm/bitops.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/parisc/include/asm/bitops.h b/arch/parisc/include/asm/bitops.h index 0ec9cfc5131fc3..56ffd260c669b7 100644 --- a/arch/parisc/include/asm/bitops.h +++ b/arch/parisc/include/asm/bitops.h @@ -12,6 +12,14 @@ #include #include +/* compiler build environment sanity checks: */ +#if !defined(CONFIG_64BIT) && defined(__LP64__) +#error "Please use 'ARCH=parisc' to build the 32-bit kernel." +#endif +#if defined(CONFIG_64BIT) && !defined(__LP64__) +#error "Please use 'ARCH=parisc64' to build the 64-bit kernel." +#endif + /* See http://marc.theaimsgroup.com/?t=108826637900003 for discussion * on use of volatile and __*_bit() (set/clear/change): * *_bit() want use of volatile. From 2874b7911132f6975e668f6849c8ac93bc4e1f35 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Sat, 12 Feb 2022 00:44:11 +0100 Subject: [PATCH 144/493] netfilter: xt_socket: missing ifdef CONFIG_IP6_NF_IPTABLES dependency nf_defrag_ipv6_disable() requires CONFIG_IP6_NF_IPTABLES. Fixes: 75063c9294fb ("netfilter: xt_socket: fix a typo in socket_mt_destroy()") Reported-by: kernel test robot Reviewed-by: Eric Dumazet Signed-off-by: Pablo Neira Ayuso --- net/netfilter/xt_socket.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/netfilter/xt_socket.c b/net/netfilter/xt_socket.c index 662e5eb1cc39e5..7013f55f05d1eb 100644 --- a/net/netfilter/xt_socket.c +++ b/net/netfilter/xt_socket.c @@ -220,8 +220,10 @@ static void socket_mt_destroy(const struct xt_mtdtor_param *par) { if (par->family == NFPROTO_IPV4) nf_defrag_ipv4_disable(par->net); +#if IS_ENABLED(CONFIG_IP6_NF_IPTABLES) else if (par->family == NFPROTO_IPV6) nf_defrag_ipv6_disable(par->net); +#endif } static struct xt_match socket_mt_reg[] __read_mostly = { From 538f4f022a4612f969d5324ee227403c9f8b1d72 Mon Sep 17 00:00:00 2001 From: Christian Brauner Date: Thu, 3 Feb 2022 14:14:07 +0100 Subject: [PATCH 145/493] fs: add kernel doc for mnt_{hold,unhold}_writers() When I introduced mnt_{hold,unhold}_writers() in commit fbdc2f6c40f6 ("fs: split out functions to hold writers") I did not add kernel doc for them. Fix this and introduce proper documentation. Link: https://lore.kernel.org/r/20220203131411.3093040-4-brauner@kernel.org Fixes: fbdc2f6c40f6 ("fs: split out functions to hold writers") Cc: Seth Forshee Cc: Christoph Hellwig Cc: Al Viro Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig Signed-off-by: Christian Brauner --- fs/namespace.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/fs/namespace.c b/fs/namespace.c index 40b994a29e90df..de6fae84f1a1ab 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -469,6 +469,24 @@ void mnt_drop_write_file(struct file *file) } EXPORT_SYMBOL(mnt_drop_write_file); +/** + * mnt_hold_writers - prevent write access to the given mount + * @mnt: mnt to prevent write access to + * + * Prevents write access to @mnt if there are no active writers for @mnt. + * This function needs to be called and return successfully before changing + * properties of @mnt that need to remain stable for callers with write access + * to @mnt. + * + * After this functions has been called successfully callers must pair it with + * a call to mnt_unhold_writers() in order to stop preventing write access to + * @mnt. + * + * Context: This function expects lock_mount_hash() to be held serializing + * setting MNT_WRITE_HOLD. + * Return: On success 0 is returned. + * On error, -EBUSY is returned. + */ static inline int mnt_hold_writers(struct mount *mnt) { mnt->mnt.mnt_flags |= MNT_WRITE_HOLD; @@ -500,6 +518,18 @@ static inline int mnt_hold_writers(struct mount *mnt) return 0; } +/** + * mnt_unhold_writers - stop preventing write access to the given mount + * @mnt: mnt to stop preventing write access to + * + * Stop preventing write access to @mnt allowing callers to gain write access + * to @mnt again. + * + * This function can only be called after a successful call to + * mnt_hold_writers(). + * + * Context: This function expects lock_mount_hash() to be held. + */ static inline void mnt_unhold_writers(struct mount *mnt) { /* From 19d20c7a29bf2e46ff1ab8e8c4fcd2da8a4f38e2 Mon Sep 17 00:00:00 2001 From: Matteo Martelli Date: Fri, 11 Feb 2022 23:49:13 +0100 Subject: [PATCH 146/493] ALSA: usb-audio: revert to IMPLICIT_FB_FIXED_DEV for M-Audio FastTrack Ultra Commit 83b7dcbc51c930fc2079ab6c6fc9d719768321f1 introduced a generic implicit feedback parser, which fails to execute for M-Audio FastTrack Ultra sound cards. The issue is with the ENDPOINT_SYNCTYPE check in add_generic_implicit_fb() where the SYNCTYPE is ADAPTIVE instead of ASYNC. The reason is that the sync type of the FastTrack output endpoints are set to adaptive in the quirks table since commit 65f04443c96dbda11b8fff21d6390e082846aa3c. Fixes: 83b7dcbc51c9 ("ALSA: usb-audio: Add generic implicit fb parsing") Signed-off-by: Matteo Martelli Cc: Link: https://lore.kernel.org/r/20220211224913.20683-2-matteomartelli3@gmail.com Signed-off-by: Takashi Iwai --- sound/usb/implicit.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/usb/implicit.c b/sound/usb/implicit.c index 70319c822c10bd..2d444ec7420297 100644 --- a/sound/usb/implicit.c +++ b/sound/usb/implicit.c @@ -47,13 +47,13 @@ struct snd_usb_implicit_fb_match { static const struct snd_usb_implicit_fb_match playback_implicit_fb_quirks[] = { /* Generic matching */ IMPLICIT_FB_GENERIC_DEV(0x0499, 0x1509), /* Steinberg UR22 */ - IMPLICIT_FB_GENERIC_DEV(0x0763, 0x2080), /* M-Audio FastTrack Ultra */ - IMPLICIT_FB_GENERIC_DEV(0x0763, 0x2081), /* M-Audio FastTrack Ultra */ IMPLICIT_FB_GENERIC_DEV(0x0763, 0x2030), /* M-Audio Fast Track C400 */ IMPLICIT_FB_GENERIC_DEV(0x0763, 0x2031), /* M-Audio Fast Track C600 */ /* Fixed EP */ /* FIXME: check the availability of generic matching */ + IMPLICIT_FB_FIXED_DEV(0x0763, 0x2080, 0x81, 2), /* M-Audio FastTrack Ultra */ + IMPLICIT_FB_FIXED_DEV(0x0763, 0x2081, 0x81, 2), /* M-Audio FastTrack Ultra */ IMPLICIT_FB_FIXED_DEV(0x2466, 0x8010, 0x81, 2), /* Fractal Audio Axe-Fx III */ IMPLICIT_FB_FIXED_DEV(0x31e9, 0x0001, 0x81, 2), /* Solid State Logic SSL2 */ IMPLICIT_FB_FIXED_DEV(0x31e9, 0x0002, 0x81, 2), /* Solid State Logic SSL2+ */ From c07f2c7b45413a9e50ba78630fda04ecfa17b4f2 Mon Sep 17 00:00:00 2001 From: Yu Huang Date: Sun, 13 Feb 2022 00:08:33 +0800 Subject: [PATCH 147/493] ALSA: hda/realtek: Add quirk for Legion Y9000X 2019 Legion Y9000X 2019 has the same speaker with Y9000X 2020, but with a different quirk address. Add one quirk entry to make the speaker work on Y9000X 2019 too. Signed-off-by: Yu Huang Cc: Link: https://lore.kernel.org/r/20220212160835.165065-1-diwang90@gmail.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 8315bf7d4c381d..9473fb76ff197a 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9170,6 +9170,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x3824, "Legion Y9000X 2020", ALC285_FIXUP_LEGION_Y9000X_SPEAKERS), SND_PCI_QUIRK(0x17aa, 0x3827, "Ideapad S740", ALC285_FIXUP_IDEAPAD_S740_COEF), SND_PCI_QUIRK(0x17aa, 0x3834, "Lenovo IdeaPad Slim 9i 14ITL5", ALC287_FIXUP_YOGA7_14ITL_SPEAKERS), + SND_PCI_QUIRK(0x17aa, 0x383d, "Legion Y9000X 2019", ALC285_FIXUP_LEGION_Y9000X_SPEAKERS), SND_PCI_QUIRK(0x17aa, 0x3843, "Yoga 9i", ALC287_FIXUP_IDEAPAD_BASS_SPK_AMP), SND_PCI_QUIRK(0x17aa, 0x3847, "Legion 7 16ACHG6", ALC287_FIXUP_LEGION_16ACHG6), SND_PCI_QUIRK(0x17aa, 0x384a, "Lenovo Yoga 7 15ITL5", ALC287_FIXUP_YOGA7_14ITL_SPEAKERS), From ddbd89deb7d32b1fbb879f48d68fda1a8ac58e8e Mon Sep 17 00:00:00 2001 From: Halil Pasic Date: Fri, 11 Feb 2022 02:12:52 +0100 Subject: [PATCH 148/493] swiotlb: fix info leak with DMA_FROM_DEVICE The problem I'm addressing was discovered by the LTP test covering cve-2018-1000204. A short description of what happens follows: 1) The test case issues a command code 00 (TEST UNIT READY) via the SG_IO interface with: dxfer_len == 524288, dxdfer_dir == SG_DXFER_FROM_DEV and a corresponding dxferp. The peculiar thing about this is that TUR is not reading from the device. 2) In sg_start_req() the invocation of blk_rq_map_user() effectively bounces the user-space buffer. As if the device was to transfer into it. Since commit a45b599ad808 ("scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()") we make sure this first bounce buffer is allocated with GFP_ZERO. 3) For the rest of the story we keep ignoring that we have a TUR, so the device won't touch the buffer we prepare as if the we had a DMA_FROM_DEVICE type of situation. My setup uses a virtio-scsi device and the buffer allocated by SG is mapped by the function virtqueue_add_split() which uses DMA_FROM_DEVICE for the "in" sgs (here scatter-gather and not scsi generics). This mapping involves bouncing via the swiotlb (we need swiotlb to do virtio in protected guest like s390 Secure Execution, or AMD SEV). 4) When the SCSI TUR is done, we first copy back the content of the second (that is swiotlb) bounce buffer (which most likely contains some previous IO data), to the first bounce buffer, which contains all zeros. Then we copy back the content of the first bounce buffer to the user-space buffer. 5) The test case detects that the buffer, which it zero-initialized, ain't all zeros and fails. One can argue that this is an swiotlb problem, because without swiotlb we leak all zeros, and the swiotlb should be transparent in a sense that it does not affect the outcome (if all other participants are well behaved). Copying the content of the original buffer into the swiotlb buffer is the only way I can think of to make swiotlb transparent in such scenarios. So let's do just that if in doubt, but allow the driver to tell us that the whole mapped buffer is going to be overwritten, in which case we can preserve the old behavior and avoid the performance impact of the extra bounce. Signed-off-by: Halil Pasic Signed-off-by: Christoph Hellwig --- Documentation/core-api/dma-attributes.rst | 8 ++++++++ include/linux/dma-mapping.h | 8 ++++++++ kernel/dma/swiotlb.c | 3 ++- 3 files changed, 18 insertions(+), 1 deletion(-) diff --git a/Documentation/core-api/dma-attributes.rst b/Documentation/core-api/dma-attributes.rst index 1887d92e8e9269..17706dc91ec9fc 100644 --- a/Documentation/core-api/dma-attributes.rst +++ b/Documentation/core-api/dma-attributes.rst @@ -130,3 +130,11 @@ accesses to DMA buffers in both privileged "supervisor" and unprivileged subsystem that the buffer is fully accessible at the elevated privilege level (and ideally inaccessible or at least read-only at the lesser-privileged levels). + +DMA_ATTR_OVERWRITE +------------------ + +This is a hint to the DMA-mapping subsystem that the device is expected to +overwrite the entire mapped size, thus the caller does not require any of the +previous buffer contents to be preserved. This allows bounce-buffering +implementations to optimise DMA_FROM_DEVICE transfers. diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h index dca2b1355bb133..6150d11a607e1c 100644 --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -61,6 +61,14 @@ */ #define DMA_ATTR_PRIVILEGED (1UL << 9) +/* + * This is a hint to the DMA-mapping subsystem that the device is expected + * to overwrite the entire mapped size, thus the caller does not require any + * of the previous buffer contents to be preserved. This allows + * bounce-buffering implementations to optimise DMA_FROM_DEVICE transfers. + */ +#define DMA_ATTR_OVERWRITE (1UL << 10) + /* * A dma_addr_t can hold any valid DMA or bus address for the platform. It can * be given to a device to use as a DMA source or target. It is specific to a diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c index f1e7ea160b4339..bfc56cb217059e 100644 --- a/kernel/dma/swiotlb.c +++ b/kernel/dma/swiotlb.c @@ -628,7 +628,8 @@ phys_addr_t swiotlb_tbl_map_single(struct device *dev, phys_addr_t orig_addr, mem->slots[index + i].orig_addr = slot_addr(orig_addr, i); tlb_addr = slot_addr(mem->start, index) + offset; if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC) && - (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL)) + (!(attrs & DMA_ATTR_OVERWRITE) || dir == DMA_TO_DEVICE || + dir == DMA_BIDIRECTIONAL)) swiotlb_bounce(dev, tlb_addr, mapping_size, DMA_TO_DEVICE); return tlb_addr; } From 698bef8ff5d2edea5d1c9d6e5adf1bfed1e8a106 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Mon, 7 Feb 2022 15:26:59 +0200 Subject: [PATCH 149/493] drm/i915: Fix dbuf slice config lookup MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Apparently I totally fumbled the loop condition when I removed the ARRAY_SIZE() stuff from the dbuf slice config lookup. Comparing the loop index with the active_pipes bitmask is utter nonsense, what we want to do is check to see if the mask is zero or not. Note that the code actually ended up working correctly despite the fumble, up until commit eef173954432 ("drm/i915: Allow !join_mbus cases for adlp+ dbuf configuration") when things broke for real. Cc: stable@vger.kernel.org Fixes: 05e8155afe35 ("drm/i915: Use a sentinel to terminate the dbuf slice arrays") Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20220207132700.481-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula (cherry picked from commit a28fde308c3c1c174249ff9559b57f24e6850086) Signed-off-by: Tvrtko Ursulin --- drivers/gpu/drm/i915/intel_pm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 3edba7fd0c4907..da6ce24a42b2e7 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -4870,7 +4870,7 @@ static u8 compute_dbuf_slices(enum pipe pipe, u8 active_pipes, bool join_mbus, { int i; - for (i = 0; i < dbuf_slices[i].active_pipes; i++) { + for (i = 0; dbuf_slices[i].active_pipes != 0; i++) { if (dbuf_slices[i].active_pipes == active_pipes && dbuf_slices[i].join_mbus == join_mbus) return dbuf_slices[i].dbuf_mask[pipe]; From 8d9d2a723d64b650f2e6423024ccb4a33f0cdc40 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Mon, 7 Feb 2022 15:27:00 +0200 Subject: [PATCH 150/493] drm/i915: Fix mbus join config lookup MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The bogus loop from compute_dbuf_slices() was copied into check_mbus_joined() as well. So this lookup is wrong as well. Fix it. Cc: stable@vger.kernel.org Fixes: f4dc00863226 ("drm/i915/adl_p: MBUS programming") Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20220207132700.481-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula (cherry picked from commit 053f2b85631316a9226f6340c1c0fd95634f7a5b) Signed-off-by: Tvrtko Ursulin --- drivers/gpu/drm/i915/intel_pm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index da6ce24a42b2e7..32bc155f5dc0a3 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -4853,7 +4853,7 @@ static bool check_mbus_joined(u8 active_pipes, { int i; - for (i = 0; i < dbuf_slices[i].active_pipes; i++) { + for (i = 0; dbuf_slices[i].active_pipes != 0; i++) { if (dbuf_slices[i].active_pipes == active_pipes) return dbuf_slices[i].join_mbus; } From 0bdc0a0699929c814a8aecd55d2accb8c11beae2 Mon Sep 17 00:00:00 2001 From: Matthew Auld Date: Wed, 9 Feb 2022 11:16:52 +0000 Subject: [PATCH 151/493] drm/i915/ttm: tweak priority hint selection MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit For some reason we are selecting PRIO_HAS_PAGES when we don't have mm.pages, and vice versa. v2(Thomas): - Add missing fixes tag Fixes: 213d50927763 ("drm/i915/ttm: Introduce a TTM i915 gem object backend") Signed-off-by: Matthew Auld Cc: Thomas Hellström Reviewed-by: Thomas Hellström Link: https://patchwork.freedesktop.org/patch/msgid/20220209111652.468762-1-matthew.auld@intel.com (cherry picked from commit ba2c5d15022a565da187d90e2fe44768e33e5034) Signed-off-by: Tvrtko Ursulin --- drivers/gpu/drm/i915/gem/i915_gem_ttm.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/gem/i915_gem_ttm.c b/drivers/gpu/drm/i915/gem/i915_gem_ttm.c index de3fe79b665a11..1f880c8c66e73e 100644 --- a/drivers/gpu/drm/i915/gem/i915_gem_ttm.c +++ b/drivers/gpu/drm/i915/gem/i915_gem_ttm.c @@ -842,11 +842,9 @@ void i915_ttm_adjust_lru(struct drm_i915_gem_object *obj) } else if (obj->mm.madv != I915_MADV_WILLNEED) { bo->priority = I915_TTM_PRIO_PURGE; } else if (!i915_gem_object_has_pages(obj)) { - if (bo->priority < I915_TTM_PRIO_HAS_PAGES) - bo->priority = I915_TTM_PRIO_HAS_PAGES; + bo->priority = I915_TTM_PRIO_NO_PAGES; } else { - if (bo->priority > I915_TTM_PRIO_NO_PAGES) - bo->priority = I915_TTM_PRIO_NO_PAGES; + bo->priority = I915_TTM_PRIO_HAS_PAGES; } ttm_bo_move_to_lru_tail(bo, bo->resource, NULL); From ea958422291de248b9e2eaaeea36004e84b64043 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Thu, 10 Feb 2022 12:36:42 +0200 Subject: [PATCH 152/493] drm/i915/opregion: check port number bounds for SWSCI display power state MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The mapping from enum port to whatever port numbering scheme is used by the SWSCI Display Power State Notification is odd, and the memory of it has faded. In any case, the parameter only has space for ports numbered [0..4], and UBSAN reports bit shift beyond it when the platform has port F or more. Since the SWSCI functionality is supposed to be obsolete for new platforms (i.e. ones that might have port F or more), just bail out early if the mapped and mangled port number is beyond what the Display Power State Notification can support. Fixes: 9c4b0a683193 ("drm/i915: add opregion function to notify bios of encoder enable/disable") Cc: # v3.13+ Cc: Ville Syrjälä Cc: Lucas De Marchi Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4800 Signed-off-by: Jani Nikula Reviewed-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/cc363f42d6b5a5932b6d218fefcc8bdfb15dbbe5.1644489329.git.jani.nikula@intel.com (cherry picked from commit 24a644ebbfd3b13cda702f98907f9dd123e34bf9) Signed-off-by: Tvrtko Ursulin --- drivers/gpu/drm/i915/display/intel_opregion.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/gpu/drm/i915/display/intel_opregion.c b/drivers/gpu/drm/i915/display/intel_opregion.c index 0065111593a602..4a2662838cd8da 100644 --- a/drivers/gpu/drm/i915/display/intel_opregion.c +++ b/drivers/gpu/drm/i915/display/intel_opregion.c @@ -360,6 +360,21 @@ int intel_opregion_notify_encoder(struct intel_encoder *intel_encoder, port++; } + /* + * The port numbering and mapping here is bizarre. The now-obsolete + * swsci spec supports ports numbered [0..4]. Port E is handled as a + * special case, but port F and beyond are not. The functionality is + * supposed to be obsolete for new platforms. Just bail out if the port + * number is out of bounds after mapping. + */ + if (port > 4) { + drm_dbg_kms(&dev_priv->drm, + "[ENCODER:%d:%s] port %c (index %u) out of bounds for display power state notification\n", + intel_encoder->base.base.id, intel_encoder->base.name, + port_name(intel_encoder->port), port); + return -EINVAL; + } + if (!enable) parm |= 4 << 8; From 26ace8793aaefbcd0d6bb664573ded35c69cd6ef Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Thu, 10 Feb 2022 12:31:07 +0200 Subject: [PATCH 153/493] drm/i915/fbc: Fix the plane end Y offset check MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We lost the required >>16 when I refactored the FBC plane state checks. Bring it back so the check does what it's supposed to. Cc: Mika Kahola Fixes: 2e6c99f88679 ("drm/i915/fbc: Nuke lots of crap from intel_fbc_state_cache") Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20220210103107.24492-1-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola (cherry picked from commit f7bc440bc79ae5dcf648b90209910ea8dba6ef0c) Signed-off-by: Tvrtko Ursulin --- drivers/gpu/drm/i915/display/intel_fbc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/display/intel_fbc.c b/drivers/gpu/drm/i915/display/intel_fbc.c index 160fd2bdafe59b..957feeccff3fce 100644 --- a/drivers/gpu/drm/i915/display/intel_fbc.c +++ b/drivers/gpu/drm/i915/display/intel_fbc.c @@ -1115,7 +1115,8 @@ static int intel_fbc_check_plane(struct intel_atomic_state *state, /* Wa_22010751166: icl, ehl, tgl, dg1, rkl */ if (DISPLAY_VER(i915) >= 11 && - (plane_state->view.color_plane[0].y + drm_rect_height(&plane_state->uapi.src)) & 3) { + (plane_state->view.color_plane[0].y + + (drm_rect_height(&plane_state->uapi.src) >> 16)) & 3) { plane_state->no_fbc_reason = "plane end Y offset misaligned"; return false; } From 6317f7449348a897483a2b4841f7a9190745c81b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 14 Feb 2022 11:00:19 +0100 Subject: [PATCH 154/493] ALSA: hda: Fix regression on forced probe mask option The forced probe mask via probe_mask 0x100 bit doesn't work any longer as expected since the bus init code was moved and it's clearing the codec_mask value that was set beforehand. This patch fixes the long-time regression by moving the check_probe_mask() call. Fixes: a41d122449be ("ALSA: hda - Embed bus into controller object") Reported-by: dmummenschanz@web.de Cc: Link: https://lore.kernel.org/r/trinity-f018660b-95c9-442b-a2a8-c92a56eb07ed-1644345967148@3c-app-webde-bap22 Link: https://lore.kernel.org/r/20220214100020.8870-1-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 4b0338c4c54377..18b795220b52c5 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -1798,8 +1798,6 @@ static int azx_create(struct snd_card *card, struct pci_dev *pci, assign_position_fix(chip, check_position_fix(chip, position_fix[dev])); - check_probe_mask(chip, dev); - if (single_cmd < 0) /* allow fallback to single_cmd at errors */ chip->fallback_to_single_cmd = 1; else /* explicitly set to single_cmd or not */ @@ -1825,6 +1823,8 @@ static int azx_create(struct snd_card *card, struct pci_dev *pci, chip->bus.core.needs_damn_long_delay = 1; } + check_probe_mask(chip, dev); + err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); if (err < 0) { dev_err(card->dev, "Error creating device [card]!\n"); From dd8e5b161d7fb9cefa1f1d6e35a39b9e1563c8d3 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 14 Feb 2022 11:00:20 +0100 Subject: [PATCH 155/493] ALSA: hda: Fix missing codec probe on Shenker Dock 15 By some unknown reason, BIOS on Shenker Dock 15 doesn't set up the codec mask properly for the onboard audio. Let's set the forced codec mask to enable the codec discovery. Reported-by: dmummenschanz@web.de Cc: Link: https://lore.kernel.org/r/trinity-f018660b-95c9-442b-a2a8-c92a56eb07ed-1644345967148@3c-app-webde-bap22 Link: https://lore.kernel.org/r/20220214100020.8870-2-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 18b795220b52c5..917ad9d375b179 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -1615,6 +1615,7 @@ static const struct snd_pci_quirk probe_mask_list[] = { /* forced codec slots */ SND_PCI_QUIRK(0x1043, 0x1262, "ASUS W5Fm", 0x103), SND_PCI_QUIRK(0x1046, 0x1262, "ASUS W5F", 0x103), + SND_PCI_QUIRK(0x1558, 0x0351, "Schenker Dock 15", 0x105), /* WinFast VP200 H (Teradici) user reported broken communication */ SND_PCI_QUIRK(0x3a21, 0x040d, "WinFast VP200 H", 0x101), {} From 86006f996346e8a5a1ea80637ec949ceeea4ecbc Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Fri, 11 Feb 2022 09:14:18 -0800 Subject: [PATCH 156/493] ice: enable parsing IPSEC SPI headers for RSS The COMMS package can enable the hardware parser to recognize IPSEC frames with ESP header and SPI identifier. If this package is available and configured for loading in /lib/firmware, then the driver will succeed in enabling this protocol type for RSS. This in turn allows the hardware to hash over the SPI and use it to pick a consistent receive queue for the same secure flow. Without this all traffic is steered to the same queue for multiple traffic threads from the same IP address. For that reason this is marked as a fix, as the driver supports the model, but it wasn't enabled. If the package is not available, adding this type will fail, but the failure is ignored on purpose as it has no negative affect. Fixes: c90ed40cefe1 ("ice: Enable writing hardware filtering tables") Signed-off-by: Jesse Brandeburg Tested-by: Gurucharan G (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ice/ice_lib.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c index 0c187cf04fcfea..53256aca27c785 100644 --- a/drivers/net/ethernet/intel/ice/ice_lib.c +++ b/drivers/net/ethernet/intel/ice/ice_lib.c @@ -1684,6 +1684,12 @@ static void ice_vsi_set_rss_flow_fld(struct ice_vsi *vsi) if (status) dev_dbg(dev, "ice_add_rss_cfg failed for sctp6 flow, vsi = %d, error = %d\n", vsi_num, status); + + status = ice_add_rss_cfg(hw, vsi_handle, ICE_FLOW_HASH_ESP_SPI, + ICE_FLOW_SEG_HDR_ESP); + if (status) + dev_dbg(dev, "ice_add_rss_cfg failed for esp/spi flow, vsi = %d, error = %d\n", + vsi_num, status); } /** From dbd0b42350d5717786cb8257fbe5b528f3af9772 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sun, 13 Feb 2022 22:52:11 +0100 Subject: [PATCH 157/493] parisc: Fix some apparent put_user() failures After commit 4b9d2a731c3d ("parisc: Switch user access functions to signal errors in r29 instead of r8") bash suddenly started to report those warnings after login: -bash: cannot set terminal process group (-1): Bad file descriptor -bash: no job control in this shell It turned out, that a function call inside a put_user(), e.g.: put_user(vt_do_kdgkbmode(console), (int __user *)arg); clobbered the error register (r29) and thus the put_user() call itself seem to have failed. Rearrange the C-code to pre-calculate the intermediate value and then do the put_user(). Additionally prefer the "+" constraint on pu_err and gu_err registers to tell the compiler that those operands are both read and written by the assembly instruction. Reported-by: John David Anglin Signed-off-by: Helge Deller Fixes: 4b9d2a731c3d ("parisc: Switch user access functions to signal errors in r29 instead of r8") Signed-off-by: Helge Deller --- arch/parisc/include/asm/uaccess.h | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) diff --git a/arch/parisc/include/asm/uaccess.h b/arch/parisc/include/asm/uaccess.h index ebf8a845b01742..123d5f16cd9db2 100644 --- a/arch/parisc/include/asm/uaccess.h +++ b/arch/parisc/include/asm/uaccess.h @@ -89,8 +89,8 @@ struct exception_table_entry { __asm__("1: " ldx " 0(" sr "%2),%0\n" \ "9:\n" \ ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b) \ - : "=r"(__gu_val), "=r"(__gu_err) \ - : "r"(ptr), "1"(__gu_err)); \ + : "=r"(__gu_val), "+r"(__gu_err) \ + : "r"(ptr)); \ \ (val) = (__force __typeof__(*(ptr))) __gu_val; \ } @@ -123,8 +123,8 @@ struct exception_table_entry { "9:\n" \ ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b) \ ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b) \ - : "=&r"(__gu_tmp.l), "=r"(__gu_err) \ - : "r"(ptr), "1"(__gu_err)); \ + : "=&r"(__gu_tmp.l), "+r"(__gu_err) \ + : "r"(ptr)); \ \ (val) = __gu_tmp.t; \ } @@ -135,13 +135,12 @@ struct exception_table_entry { #define __put_user_internal(sr, x, ptr) \ ({ \ ASM_EXCEPTIONTABLE_VAR(__pu_err); \ - __typeof__(*(ptr)) __x = (__typeof__(*(ptr)))(x); \ \ switch (sizeof(*(ptr))) { \ - case 1: __put_user_asm(sr, "stb", __x, ptr); break; \ - case 2: __put_user_asm(sr, "sth", __x, ptr); break; \ - case 4: __put_user_asm(sr, "stw", __x, ptr); break; \ - case 8: STD_USER(sr, __x, ptr); break; \ + case 1: __put_user_asm(sr, "stb", x, ptr); break; \ + case 2: __put_user_asm(sr, "sth", x, ptr); break; \ + case 4: __put_user_asm(sr, "stw", x, ptr); break; \ + case 8: STD_USER(sr, x, ptr); break; \ default: BUILD_BUG(); \ } \ \ @@ -150,7 +149,9 @@ struct exception_table_entry { #define __put_user(x, ptr) \ ({ \ - __put_user_internal("%%sr3,", x, ptr); \ + __typeof__(&*(ptr)) __ptr = ptr; \ + __typeof__(*(__ptr)) __x = (__typeof__(*(__ptr)))(x); \ + __put_user_internal("%%sr3,", __x, __ptr); \ }) #define __put_kernel_nofault(dst, src, type, err_label) \ @@ -180,8 +181,8 @@ struct exception_table_entry { "1: " stx " %2,0(" sr "%1)\n" \ "9:\n" \ ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b) \ - : "=r"(__pu_err) \ - : "r"(ptr), "r"(x), "0"(__pu_err)) + : "+r"(__pu_err) \ + : "r"(ptr), "r"(x)) #if !defined(CONFIG_64BIT) @@ -193,8 +194,8 @@ struct exception_table_entry { "9:\n" \ ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b) \ ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b) \ - : "=r"(__pu_err) \ - : "r"(ptr), "r"(__val), "0"(__pu_err)); \ + : "+r"(__pu_err) \ + : "r"(ptr), "r"(__val)); \ } while (0) #endif /* !defined(CONFIG_64BIT) */ From b8bfee85f1307426e0242d654f3a14c06ef639c5 Mon Sep 17 00:00:00 2001 From: Jim Mattson Date: Wed, 2 Feb 2022 17:48:12 -0800 Subject: [PATCH 158/493] KVM: x86/pmu: Don't truncate the PerfEvtSeln MSR when creating a perf event AMD's event select is 3 nybbles, with the high nybble in bits 35:32 of a PerfEvtSeln MSR. Don't drop the high nybble when setting up the config field of a perf_event_attr structure for a call to perf_event_create_kernel_counter(). Fixes: ca724305a2b0 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM") Reported-by: Stephane Eranian Signed-off-by: Jim Mattson Message-Id: <20220203014813.2130559-1-jmattson@google.com> Reviewed-by: David Dunn Signed-off-by: Paolo Bonzini --- arch/x86/kvm/pmu.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/x86/kvm/pmu.c b/arch/x86/kvm/pmu.c index f614f95acc6b3e..cd923bad7aed3a 100644 --- a/arch/x86/kvm/pmu.c +++ b/arch/x86/kvm/pmu.c @@ -95,7 +95,7 @@ static void kvm_perf_overflow(struct perf_event *perf_event, } static void pmc_reprogram_counter(struct kvm_pmc *pmc, u32 type, - unsigned config, bool exclude_user, + u64 config, bool exclude_user, bool exclude_kernel, bool intr, bool in_tx, bool in_tx_cp) { @@ -181,7 +181,8 @@ static int cmp_u64(const void *a, const void *b) void reprogram_gp_counter(struct kvm_pmc *pmc, u64 eventsel) { - unsigned config, type = PERF_TYPE_RAW; + u64 config; + u32 type = PERF_TYPE_RAW; struct kvm *kvm = pmc->vcpu->kvm; struct kvm_pmu_event_filter *filter; bool allow_event = true; From 710c476514313c74045c41c0571bb5178fd16e3d Mon Sep 17 00:00:00 2001 From: Jim Mattson Date: Wed, 2 Feb 2022 17:48:13 -0800 Subject: [PATCH 159/493] KVM: x86/pmu: Use AMD64_RAW_EVENT_MASK for PERF_TYPE_RAW AMD's event select is 3 nybbles, with the high nybble in bits 35:32 of a PerfEvtSeln MSR. Don't mask off the high nybble when configuring a RAW perf event. Fixes: ca724305a2b0 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM") Signed-off-by: Jim Mattson Message-Id: <20220203014813.2130559-2-jmattson@google.com> Reviewed-by: David Dunn Signed-off-by: Paolo Bonzini --- arch/x86/kvm/pmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/pmu.c b/arch/x86/kvm/pmu.c index cd923bad7aed3a..b1a02993782b37 100644 --- a/arch/x86/kvm/pmu.c +++ b/arch/x86/kvm/pmu.c @@ -221,7 +221,7 @@ void reprogram_gp_counter(struct kvm_pmc *pmc, u64 eventsel) } if (type == PERF_TYPE_RAW) - config = eventsel & X86_RAW_EVENT_MASK; + config = eventsel & AMD64_RAW_EVENT_MASK; if (pmc->current_config == eventsel && pmc_resume_counter(pmc)) return; From 9a5adeb28b77416446658e75bdef3bbe5fb92a83 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 14 Feb 2022 13:57:11 +0100 Subject: [PATCH 160/493] ALSA: usb-audio: Don't abort resume upon errors The default mixer resume code treats the errors at restoring the modified mixer items as a fatal error, and it returns back to the caller. This ends up in the resume failure, and the device will be come unavailable, although basically those errors are intermittent and can be safely ignored. The problem itself has been present from the beginning, but it didn't hit usually because the code tries to resume only the modified items. But now with the recent commit to forcibly initialize each item at the probe time, the problem surfaced more often, hence it appears as a regression. This patch fixes the regression simply by ignoring the errors at resume. Fixes: b96681bd5827 ("ALSA: usb-audio: Initialize every feature unit once at probe time") Cc: BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215561 Link: https://lore.kernel.org/r/20220214125711.20531-1-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/usb/mixer.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index 630766ba259fdd..a5641956ef1028 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -3678,17 +3678,14 @@ static int restore_mixer_value(struct usb_mixer_elem_list *list) err = snd_usb_set_cur_mix_value(cval, c + 1, idx, cval->cache_val[idx]); if (err < 0) - return err; + break; } idx++; } } else { /* master */ - if (cval->cached) { - err = snd_usb_set_cur_mix_value(cval, 0, 0, *cval->cache_val); - if (err < 0) - return err; - } + if (cval->cached) + snd_usb_set_cur_mix_value(cval, 0, 0, *cval->cache_val); } return 0; From 2a845837e3d0ddaed493b4c5c4643d7f0542804d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 14 Feb 2022 14:04:10 +0100 Subject: [PATCH 161/493] ALSA: hda/realtek: Fix deadlock by COEF mutex The recently introduced coef_mutex for Realtek codec seems causing a deadlock when the relevant code is invoked from the power-off state; then the HD-audio core tries to power-up internally, and this kicks off the codec runtime PM code that tries to take the same coef_mutex. In order to avoid the deadlock, do the temporary power up/down around the coef_mutex acquisition and release. This assures that the power-up sequence runs before the mutex, hence no re-entrance will happen. Fixes: b837a9f5ab3b ("ALSA: hda: realtek: Fix race at concurrent COEF updates") Reported-and-tested-by: Julian Wollrath Cc: Link: https://lore.kernel.org/r/20220214132838.4db10fca@schienar Link: https://lore.kernel.org/r/20220214130410.21230-1-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 39 +++++++++++++++++++++-------------- 1 file changed, 24 insertions(+), 15 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 9473fb76ff197a..3a42457984e98d 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -138,6 +138,22 @@ struct alc_spec { * COEF access helper functions */ +static void coef_mutex_lock(struct hda_codec *codec) +{ + struct alc_spec *spec = codec->spec; + + snd_hda_power_up_pm(codec); + mutex_lock(&spec->coef_mutex); +} + +static void coef_mutex_unlock(struct hda_codec *codec) +{ + struct alc_spec *spec = codec->spec; + + mutex_unlock(&spec->coef_mutex); + snd_hda_power_down_pm(codec); +} + static int __alc_read_coefex_idx(struct hda_codec *codec, hda_nid_t nid, unsigned int coef_idx) { @@ -151,12 +167,11 @@ static int __alc_read_coefex_idx(struct hda_codec *codec, hda_nid_t nid, static int alc_read_coefex_idx(struct hda_codec *codec, hda_nid_t nid, unsigned int coef_idx) { - struct alc_spec *spec = codec->spec; unsigned int val; - mutex_lock(&spec->coef_mutex); + coef_mutex_lock(codec); val = __alc_read_coefex_idx(codec, nid, coef_idx); - mutex_unlock(&spec->coef_mutex); + coef_mutex_unlock(codec); return val; } @@ -173,11 +188,9 @@ static void __alc_write_coefex_idx(struct hda_codec *codec, hda_nid_t nid, static void alc_write_coefex_idx(struct hda_codec *codec, hda_nid_t nid, unsigned int coef_idx, unsigned int coef_val) { - struct alc_spec *spec = codec->spec; - - mutex_lock(&spec->coef_mutex); + coef_mutex_lock(codec); __alc_write_coefex_idx(codec, nid, coef_idx, coef_val); - mutex_unlock(&spec->coef_mutex); + coef_mutex_unlock(codec); } #define alc_write_coef_idx(codec, coef_idx, coef_val) \ @@ -198,11 +211,9 @@ static void alc_update_coefex_idx(struct hda_codec *codec, hda_nid_t nid, unsigned int coef_idx, unsigned int mask, unsigned int bits_set) { - struct alc_spec *spec = codec->spec; - - mutex_lock(&spec->coef_mutex); + coef_mutex_lock(codec); __alc_update_coefex_idx(codec, nid, coef_idx, mask, bits_set); - mutex_unlock(&spec->coef_mutex); + coef_mutex_unlock(codec); } #define alc_update_coef_idx(codec, coef_idx, mask, bits_set) \ @@ -235,9 +246,7 @@ struct coef_fw { static void alc_process_coef_fw(struct hda_codec *codec, const struct coef_fw *fw) { - struct alc_spec *spec = codec->spec; - - mutex_lock(&spec->coef_mutex); + coef_mutex_lock(codec); for (; fw->nid; fw++) { if (fw->mask == (unsigned short)-1) __alc_write_coefex_idx(codec, fw->nid, fw->idx, fw->val); @@ -245,7 +254,7 @@ static void alc_process_coef_fw(struct hda_codec *codec, __alc_update_coefex_idx(codec, fw->nid, fw->idx, fw->mask, fw->val); } - mutex_unlock(&spec->coef_mutex); + coef_mutex_unlock(codec); } /* From 26394fc118d6115390bd5b3a0fb17096271da227 Mon Sep 17 00:00:00 2001 From: Ignat Korchagin Date: Fri, 11 Feb 2022 17:30:42 +0000 Subject: [PATCH 162/493] ipv6: mcast: use rcu-safe version of ipv6_get_lladdr() Some time ago 8965779d2c0e ("ipv6,mcast: always hold idev->lock before mca_lock") switched ipv6_get_lladdr() to __ipv6_get_lladdr(), which is rcu-unsafe version. That was OK, because idev->lock was held for these codepaths. In 88e2ca308094 ("mld: convert ifmcaddr6 to RCU") these external locks were removed, so we probably need to restore the original rcu-safe call. Otherwise, we occasionally get a machine crashed/stalled with the following in dmesg: [ 3405.966610][T230589] general protection fault, probably for non-canonical address 0xdead00000000008c: 0000 [#1] SMP NOPTI [ 3405.982083][T230589] CPU: 44 PID: 230589 Comm: kworker/44:3 Tainted: G O 5.15.19-cloudflare-2022.2.1 #1 [ 3405.998061][T230589] Hardware name: SUPA-COOL-SERV [ 3406.009552][T230589] Workqueue: mld mld_ifc_work [ 3406.017224][T230589] RIP: 0010:__ipv6_get_lladdr+0x34/0x60 [ 3406.025780][T230589] Code: 57 10 48 83 c7 08 48 89 e5 48 39 d7 74 3e 48 8d 82 38 ff ff ff eb 13 48 8b 90 d0 00 00 00 48 8d 82 38 ff ff ff 48 39 d7 74 22 <66> 83 78 32 20 77 1b 75 e4 89 ca 23 50 2c 75 dd 48 8b 50 08 48 8b [ 3406.055748][T230589] RSP: 0018:ffff94e4b3fc3d10 EFLAGS: 00010202 [ 3406.065617][T230589] RAX: dead00000000005a RBX: ffff94e4b3fc3d30 RCX: 0000000000000040 [ 3406.077477][T230589] RDX: dead000000000122 RSI: ffff94e4b3fc3d30 RDI: ffff8c3a31431008 [ 3406.089389][T230589] RBP: ffff94e4b3fc3d10 R08: 0000000000000000 R09: 0000000000000000 [ 3406.101445][T230589] R10: ffff8c3a31430000 R11: 000000000000000b R12: ffff8c2c37887100 [ 3406.113553][T230589] R13: ffff8c3a39537000 R14: 00000000000005dc R15: ffff8c3a31431000 [ 3406.125730][T230589] FS: 0000000000000000(0000) GS:ffff8c3b9fc80000(0000) knlGS:0000000000000000 [ 3406.138992][T230589] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3406.149895][T230589] CR2: 00007f0dfea1db60 CR3: 000000387b5f2000 CR4: 0000000000350ee0 [ 3406.162421][T230589] Call Trace: [ 3406.170235][T230589] [ 3406.177736][T230589] mld_newpack+0xfe/0x1a0 [ 3406.186686][T230589] add_grhead+0x87/0xa0 [ 3406.195498][T230589] add_grec+0x485/0x4e0 [ 3406.204310][T230589] ? newidle_balance+0x126/0x3f0 [ 3406.214024][T230589] mld_ifc_work+0x15d/0x450 [ 3406.223279][T230589] process_one_work+0x1e6/0x380 [ 3406.232982][T230589] worker_thread+0x50/0x3a0 [ 3406.242371][T230589] ? rescuer_thread+0x360/0x360 [ 3406.252175][T230589] kthread+0x127/0x150 [ 3406.261197][T230589] ? set_kthread_struct+0x40/0x40 [ 3406.271287][T230589] ret_from_fork+0x22/0x30 [ 3406.280812][T230589] [ 3406.288937][T230589] Modules linked in: ... [last unloaded: kheaders] [ 3406.476714][T230589] ---[ end trace 3525a7655f2f3b9e ]--- Fixes: 88e2ca308094 ("mld: convert ifmcaddr6 to RCU") Reported-by: David Pinilla Caparros Signed-off-by: Ignat Korchagin Signed-off-by: David S. Miller --- include/net/addrconf.h | 2 -- net/ipv6/addrconf.c | 4 ++-- net/ipv6/mcast.c | 2 +- 3 files changed, 3 insertions(+), 5 deletions(-) diff --git a/include/net/addrconf.h b/include/net/addrconf.h index e7ce719838b5ec..59940e230b782f 100644 --- a/include/net/addrconf.h +++ b/include/net/addrconf.h @@ -109,8 +109,6 @@ struct inet6_ifaddr *ipv6_get_ifaddr(struct net *net, int ipv6_dev_get_saddr(struct net *net, const struct net_device *dev, const struct in6_addr *daddr, unsigned int srcprefs, struct in6_addr *saddr); -int __ipv6_get_lladdr(struct inet6_dev *idev, struct in6_addr *addr, - u32 banned_flags); int ipv6_get_lladdr(struct net_device *dev, struct in6_addr *addr, u32 banned_flags); bool inet_rcv_saddr_equal(const struct sock *sk, const struct sock *sk2, diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index f927c199a93c3e..3f23da8c0b1029 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -1839,8 +1839,8 @@ int ipv6_dev_get_saddr(struct net *net, const struct net_device *dst_dev, } EXPORT_SYMBOL(ipv6_dev_get_saddr); -int __ipv6_get_lladdr(struct inet6_dev *idev, struct in6_addr *addr, - u32 banned_flags) +static int __ipv6_get_lladdr(struct inet6_dev *idev, struct in6_addr *addr, + u32 banned_flags) { struct inet6_ifaddr *ifp; int err = -EADDRNOTAVAIL; diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c index bed8155508c85c..a8861db52c1877 100644 --- a/net/ipv6/mcast.c +++ b/net/ipv6/mcast.c @@ -1759,7 +1759,7 @@ static struct sk_buff *mld_newpack(struct inet6_dev *idev, unsigned int mtu) skb_reserve(skb, hlen); skb_tailroom_reserve(skb, mtu, tlen); - if (__ipv6_get_lladdr(idev, &addr_buf, IFA_F_TENTATIVE)) { + if (ipv6_get_lladdr(dev, &addr_buf, IFA_F_TENTATIVE)) { /* : * use unspecified address as the source address * when a valid link-local address is not available. From a2614140dc0f467a83aa3bb4b6ee2d6480a76202 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Fri, 11 Feb 2022 19:45:06 +0200 Subject: [PATCH 163/493] net: dsa: mv88e6xxx: flush switchdev FDB workqueue before removing VLAN mv88e6xxx is special among DSA drivers in that it requires the VTU to contain the VID of the FDB entry it modifies in mv88e6xxx_port_db_load_purge(), otherwise it will return -EOPNOTSUPP. Sometimes due to races this is not always satisfied even if external code does everything right (first deletes the FDB entries, then the VLAN), because DSA commits to hardware FDB entries asynchronously since commit c9eb3e0f8701 ("net: dsa: Add support for learning FDB through notification"). Therefore, the mv88e6xxx driver must close this race condition by itself, by asking DSA to flush the switchdev workqueue of any FDB deletions in progress, prior to exiting a VLAN. Fixes: c9eb3e0f8701 ("net: dsa: Add support for learning FDB through notification") Reported-by: Rafael Richter Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 7 +++++++ include/net/dsa.h | 1 + net/dsa/dsa.c | 1 + net/dsa/dsa_priv.h | 1 - 4 files changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 8530dbe403f4dc..ab1676553714cd 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -2284,6 +2284,13 @@ static int mv88e6xxx_port_vlan_del(struct dsa_switch *ds, int port, if (!mv88e6xxx_max_vid(chip)) return -EOPNOTSUPP; + /* The ATU removal procedure needs the FID to be mapped in the VTU, + * but FDB deletion runs concurrently with VLAN deletion. Flush the DSA + * switchdev workqueue to ensure that all FDB entries are deleted + * before we remove the VLAN. + */ + dsa_flush_workqueue(); + mv88e6xxx_reg_lock(chip); err = mv88e6xxx_port_get_pvid(chip, port, &pvid); diff --git a/include/net/dsa.h b/include/net/dsa.h index 57b3e4e7413bfb..85a5ba3772f553 100644 --- a/include/net/dsa.h +++ b/include/net/dsa.h @@ -1187,6 +1187,7 @@ void dsa_unregister_switch(struct dsa_switch *ds); int dsa_register_switch(struct dsa_switch *ds); void dsa_switch_shutdown(struct dsa_switch *ds); struct dsa_switch *dsa_switch_find(int tree_index, int sw_index); +void dsa_flush_workqueue(void); #ifdef CONFIG_PM_SLEEP int dsa_switch_suspend(struct dsa_switch *ds); int dsa_switch_resume(struct dsa_switch *ds); diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c index d9d0d227092c8c..c43f7446a75d12 100644 --- a/net/dsa/dsa.c +++ b/net/dsa/dsa.c @@ -349,6 +349,7 @@ void dsa_flush_workqueue(void) { flush_workqueue(dsa_owq); } +EXPORT_SYMBOL_GPL(dsa_flush_workqueue); int dsa_devlink_param_get(struct devlink *dl, u32 id, struct devlink_param_gset_ctx *ctx) diff --git a/net/dsa/dsa_priv.h b/net/dsa/dsa_priv.h index 760306f0012fde..23c79e91ac6764 100644 --- a/net/dsa/dsa_priv.h +++ b/net/dsa/dsa_priv.h @@ -147,7 +147,6 @@ void dsa_tag_driver_put(const struct dsa_device_ops *ops); const struct dsa_device_ops *dsa_find_tagger_by_name(const char *buf); bool dsa_schedule_work(struct work_struct *work); -void dsa_flush_workqueue(void); const char *dsa_tag_protocol_to_str(const struct dsa_device_ops *ops); static inline int dsa_tag_protocol_overhead(const struct dsa_device_ops *ops) From 5891cd5ec46c2c2eb6427cb54d214b149635dd0e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 11 Feb 2022 12:06:23 -0800 Subject: [PATCH 164/493] net_sched: add __rcu annotation to netdev->qdisc syzbot found a data-race [1] which lead me to add __rcu annotations to netdev->qdisc, and proper accessors to get LOCKDEP support. [1] BUG: KCSAN: data-race in dev_activate / qdisc_lookup_rcu write to 0xffff888168ad6410 of 8 bytes by task 13559 on cpu 1: attach_default_qdiscs net/sched/sch_generic.c:1167 [inline] dev_activate+0x2ed/0x8f0 net/sched/sch_generic.c:1221 __dev_open+0x2e9/0x3a0 net/core/dev.c:1416 __dev_change_flags+0x167/0x3f0 net/core/dev.c:8139 rtnl_configure_link+0xc2/0x150 net/core/rtnetlink.c:3150 __rtnl_newlink net/core/rtnetlink.c:3489 [inline] rtnl_newlink+0xf4d/0x13e0 net/core/rtnetlink.c:3529 rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5594 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmsg+0x195/0x230 net/socket.c:2496 __do_sys_sendmsg net/socket.c:2505 [inline] __se_sys_sendmsg net/socket.c:2503 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2503 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888168ad6410 of 8 bytes by task 13560 on cpu 0: qdisc_lookup_rcu+0x30/0x2e0 net/sched/sch_api.c:323 __tcf_qdisc_find+0x74/0x3a0 net/sched/cls_api.c:1050 tc_del_tfilter+0x1c7/0x1350 net/sched/cls_api.c:2211 rtnetlink_rcv_msg+0x5ba/0x7e0 net/core/rtnetlink.c:5585 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmsg+0x195/0x230 net/socket.c:2496 __do_sys_sendmsg net/socket.c:2505 [inline] __se_sys_sendmsg net/socket.c:2503 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2503 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0xffffffff85dee080 -> 0xffff88815d96ec00 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 13560 Comm: syz-executor.2 Not tainted 5.17.0-rc3-syzkaller-00116-gf1baf68e1383-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 470502de5bdb ("net: sched: unlock rules update API") Signed-off-by: Eric Dumazet Cc: Vlad Buslov Reported-by: syzbot Cc: Jamal Hadi Salim Cc: Cong Wang Cc: Jiri Pirko Signed-off-by: David S. Miller --- include/linux/netdevice.h | 2 +- net/core/rtnetlink.c | 6 ++++-- net/sched/cls_api.c | 6 +++--- net/sched/sch_api.c | 22 ++++++++++++---------- net/sched/sch_generic.c | 29 ++++++++++++++++------------- 5 files changed, 36 insertions(+), 29 deletions(-) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index e490b84732d165..8b5a314db167d5 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2158,7 +2158,7 @@ struct net_device { struct netdev_queue *_tx ____cacheline_aligned_in_smp; unsigned int num_tx_queues; unsigned int real_num_tx_queues; - struct Qdisc *qdisc; + struct Qdisc __rcu *qdisc; unsigned int tx_queue_len; spinlock_t tx_global_lock; diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 710da8a36729d6..2fb8eb6791e8ab 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -1699,6 +1699,7 @@ static int rtnl_fill_ifinfo(struct sk_buff *skb, { struct ifinfomsg *ifm; struct nlmsghdr *nlh; + struct Qdisc *qdisc; ASSERT_RTNL(); nlh = nlmsg_put(skb, pid, seq, type, sizeof(*ifm), flags); @@ -1716,6 +1717,7 @@ static int rtnl_fill_ifinfo(struct sk_buff *skb, if (tgt_netnsid >= 0 && nla_put_s32(skb, IFLA_TARGET_NETNSID, tgt_netnsid)) goto nla_put_failure; + qdisc = rtnl_dereference(dev->qdisc); if (nla_put_string(skb, IFLA_IFNAME, dev->name) || nla_put_u32(skb, IFLA_TXQLEN, dev->tx_queue_len) || nla_put_u8(skb, IFLA_OPERSTATE, @@ -1735,8 +1737,8 @@ static int rtnl_fill_ifinfo(struct sk_buff *skb, #endif put_master_ifindex(skb, dev) || nla_put_u8(skb, IFLA_CARRIER, netif_carrier_ok(dev)) || - (dev->qdisc && - nla_put_string(skb, IFLA_QDISC, dev->qdisc->ops->id)) || + (qdisc && + nla_put_string(skb, IFLA_QDISC, qdisc->ops->id)) || nla_put_ifalias(skb, dev) || nla_put_u32(skb, IFLA_CARRIER_CHANGES, atomic_read(&dev->carrier_up_count) + diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c index 5f0f346b576fc0..5ce1208a6ea362 100644 --- a/net/sched/cls_api.c +++ b/net/sched/cls_api.c @@ -1044,7 +1044,7 @@ static int __tcf_qdisc_find(struct net *net, struct Qdisc **q, /* Find qdisc */ if (!*parent) { - *q = dev->qdisc; + *q = rcu_dereference(dev->qdisc); *parent = (*q)->handle; } else { *q = qdisc_lookup_rcu(dev, TC_H_MAJ(*parent)); @@ -2587,7 +2587,7 @@ static int tc_dump_tfilter(struct sk_buff *skb, struct netlink_callback *cb) parent = tcm->tcm_parent; if (!parent) - q = dev->qdisc; + q = rtnl_dereference(dev->qdisc); else q = qdisc_lookup(dev, TC_H_MAJ(tcm->tcm_parent)); if (!q) @@ -2962,7 +2962,7 @@ static int tc_dump_chain(struct sk_buff *skb, struct netlink_callback *cb) return skb->len; if (!tcm->tcm_parent) - q = dev->qdisc; + q = rtnl_dereference(dev->qdisc); else q = qdisc_lookup(dev, TC_H_MAJ(tcm->tcm_parent)); diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index 179825a3b2fdb5..e3c0e8ea2dbb34 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -301,7 +301,7 @@ struct Qdisc *qdisc_lookup(struct net_device *dev, u32 handle) if (!handle) return NULL; - q = qdisc_match_from_root(dev->qdisc, handle); + q = qdisc_match_from_root(rtnl_dereference(dev->qdisc), handle); if (q) goto out; @@ -320,7 +320,7 @@ struct Qdisc *qdisc_lookup_rcu(struct net_device *dev, u32 handle) if (!handle) return NULL; - q = qdisc_match_from_root(dev->qdisc, handle); + q = qdisc_match_from_root(rcu_dereference(dev->qdisc), handle); if (q) goto out; @@ -1082,10 +1082,10 @@ static int qdisc_graft(struct net_device *dev, struct Qdisc *parent, skip: if (!ingress) { notify_and_destroy(net, skb, n, classid, - dev->qdisc, new); + rtnl_dereference(dev->qdisc), new); if (new && !new->ops->attach) qdisc_refcount_inc(new); - dev->qdisc = new ? : &noop_qdisc; + rcu_assign_pointer(dev->qdisc, new ? : &noop_qdisc); if (new && new->ops->attach) new->ops->attach(new); @@ -1451,7 +1451,7 @@ static int tc_get_qdisc(struct sk_buff *skb, struct nlmsghdr *n, q = dev_ingress_queue(dev)->qdisc_sleeping; } } else { - q = dev->qdisc; + q = rtnl_dereference(dev->qdisc); } if (!q) { NL_SET_ERR_MSG(extack, "Cannot find specified qdisc on specified device"); @@ -1540,7 +1540,7 @@ static int tc_modify_qdisc(struct sk_buff *skb, struct nlmsghdr *n, q = dev_ingress_queue(dev)->qdisc_sleeping; } } else { - q = dev->qdisc; + q = rtnl_dereference(dev->qdisc); } /* It may be default qdisc, ignore it */ @@ -1762,7 +1762,8 @@ static int tc_dump_qdisc(struct sk_buff *skb, struct netlink_callback *cb) s_q_idx = 0; q_idx = 0; - if (tc_dump_qdisc_root(dev->qdisc, skb, cb, &q_idx, s_q_idx, + if (tc_dump_qdisc_root(rtnl_dereference(dev->qdisc), + skb, cb, &q_idx, s_q_idx, true, tca[TCA_DUMP_INVISIBLE]) < 0) goto done; @@ -2033,7 +2034,7 @@ static int tc_ctl_tclass(struct sk_buff *skb, struct nlmsghdr *n, } else if (qid1) { qid = qid1; } else if (qid == 0) - qid = dev->qdisc->handle; + qid = rtnl_dereference(dev->qdisc)->handle; /* Now qid is genuine qdisc handle consistent * both with parent and child. @@ -2044,7 +2045,7 @@ static int tc_ctl_tclass(struct sk_buff *skb, struct nlmsghdr *n, portid = TC_H_MAKE(qid, portid); } else { if (qid == 0) - qid = dev->qdisc->handle; + qid = rtnl_dereference(dev->qdisc)->handle; } /* OK. Locate qdisc */ @@ -2205,7 +2206,8 @@ static int tc_dump_tclass(struct sk_buff *skb, struct netlink_callback *cb) s_t = cb->args[0]; t = 0; - if (tc_dump_tclass_root(dev->qdisc, skb, tcm, cb, &t, s_t, true) < 0) + if (tc_dump_tclass_root(rtnl_dereference(dev->qdisc), + skb, tcm, cb, &t, s_t, true) < 0) goto done; dev_queue = dev_ingress_queue(dev); diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index f893d9a81b019e..5bab9f8b8f4535 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -1164,30 +1164,33 @@ static void attach_default_qdiscs(struct net_device *dev) if (!netif_is_multiqueue(dev) || dev->priv_flags & IFF_NO_QUEUE) { netdev_for_each_tx_queue(dev, attach_one_default_qdisc, NULL); - dev->qdisc = txq->qdisc_sleeping; - qdisc_refcount_inc(dev->qdisc); + qdisc = txq->qdisc_sleeping; + rcu_assign_pointer(dev->qdisc, qdisc); + qdisc_refcount_inc(qdisc); } else { qdisc = qdisc_create_dflt(txq, &mq_qdisc_ops, TC_H_ROOT, NULL); if (qdisc) { - dev->qdisc = qdisc; + rcu_assign_pointer(dev->qdisc, qdisc); qdisc->ops->attach(qdisc); } } + qdisc = rtnl_dereference(dev->qdisc); /* Detect default qdisc setup/init failed and fallback to "noqueue" */ - if (dev->qdisc == &noop_qdisc) { + if (qdisc == &noop_qdisc) { netdev_warn(dev, "default qdisc (%s) fail, fallback to %s\n", default_qdisc_ops->id, noqueue_qdisc_ops.id); dev->priv_flags |= IFF_NO_QUEUE; netdev_for_each_tx_queue(dev, attach_one_default_qdisc, NULL); - dev->qdisc = txq->qdisc_sleeping; - qdisc_refcount_inc(dev->qdisc); + qdisc = txq->qdisc_sleeping; + rcu_assign_pointer(dev->qdisc, qdisc); + qdisc_refcount_inc(qdisc); dev->priv_flags ^= IFF_NO_QUEUE; } #ifdef CONFIG_NET_SCHED - if (dev->qdisc != &noop_qdisc) - qdisc_hash_add(dev->qdisc, false); + if (qdisc != &noop_qdisc) + qdisc_hash_add(qdisc, false); #endif } @@ -1217,7 +1220,7 @@ void dev_activate(struct net_device *dev) * and noqueue_qdisc for virtual interfaces */ - if (dev->qdisc == &noop_qdisc) + if (rtnl_dereference(dev->qdisc) == &noop_qdisc) attach_default_qdiscs(dev); if (!netif_carrier_ok(dev)) @@ -1383,7 +1386,7 @@ static int qdisc_change_tx_queue_len(struct net_device *dev, void dev_qdisc_change_real_num_tx(struct net_device *dev, unsigned int new_real_tx) { - struct Qdisc *qdisc = dev->qdisc; + struct Qdisc *qdisc = rtnl_dereference(dev->qdisc); if (qdisc->ops->change_real_num_tx) qdisc->ops->change_real_num_tx(qdisc, new_real_tx); @@ -1447,7 +1450,7 @@ static void dev_init_scheduler_queue(struct net_device *dev, void dev_init_scheduler(struct net_device *dev) { - dev->qdisc = &noop_qdisc; + rcu_assign_pointer(dev->qdisc, &noop_qdisc); netdev_for_each_tx_queue(dev, dev_init_scheduler_queue, &noop_qdisc); if (dev_ingress_queue(dev)) dev_init_scheduler_queue(dev, dev_ingress_queue(dev), &noop_qdisc); @@ -1475,8 +1478,8 @@ void dev_shutdown(struct net_device *dev) netdev_for_each_tx_queue(dev, shutdown_scheduler_queue, &noop_qdisc); if (dev_ingress_queue(dev)) shutdown_scheduler_queue(dev, dev_ingress_queue(dev), &noop_qdisc); - qdisc_put(dev->qdisc); - dev->qdisc = &noop_qdisc; + qdisc_put(rtnl_dereference(dev->qdisc)); + rcu_assign_pointer(dev->qdisc, &noop_qdisc); WARN_ON(timer_pending(&dev->watchdog_timer)); } From 0fc95dec096c2133942c382396172ae4487b4d57 Mon Sep 17 00:00:00 2001 From: Alex Maydanik Date: Sat, 12 Feb 2022 12:29:27 +0200 Subject: [PATCH 165/493] net: fix documentation for kernel_getsockname Fixes return value documentation of kernel_getsockname() and kernel_getpeername() functions. The previous documentation wrongly specified that the return value is 0 in case of success, however sock->ops->getname returns the length of the address in bytes in case of success. Signed-off-by: Alex Maydanik Signed-off-by: David S. Miller --- net/socket.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/socket.c b/net/socket.c index 50cf75730fd7be..982eecad464c6e 100644 --- a/net/socket.c +++ b/net/socket.c @@ -3448,7 +3448,7 @@ EXPORT_SYMBOL(kernel_connect); * @addr: address holder * * Fills the @addr pointer with the address which the socket is bound. - * Returns 0 or an error code. + * Returns the length of the address in bytes or an error code. */ int kernel_getsockname(struct socket *sock, struct sockaddr *addr) @@ -3463,7 +3463,7 @@ EXPORT_SYMBOL(kernel_getsockname); * @addr: address holder * * Fills the @addr pointer with the address which the socket is connected. - * Returns 0 or an error code. + * Returns the length of the address in bytes or an error code. */ int kernel_getpeername(struct socket *sock, struct sockaddr *addr) From 603c692d574185a1fffc9549e8e30f27bd7dba6c Mon Sep 17 00:00:00 2001 From: Nikolay Aleksandrov Date: Mon, 14 Feb 2022 13:23:32 +0200 Subject: [PATCH 166/493] MAINTAINERS: bridge: update my email I'm leaving NVIDIA and my email account will stop working in a week, update it with my personal account. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 2ac90c8b432ad2..4251553ea2e825 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7180,7 +7180,7 @@ F: drivers/net/can/usb/etas_es58x/ ETHERNET BRIDGE M: Roopa Prabhu -M: Nikolay Aleksandrov +M: Nikolay Aleksandrov L: bridge@lists.linux-foundation.org (moderated for non-subscribers) L: netdev@vger.kernel.org S: Maintained From 6605cc67ca18b9d583eb96e18a20f5f4e726103c Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 14 Feb 2022 15:08:18 +0100 Subject: [PATCH 167/493] USB: zaurus: support another broken Zaurus This SL-6000 says Direct Line, not Ethernet v2: added Reporter and Link Signed-off-by: Oliver Neukum Reported-by: Ross Maynard Link: https://bugzilla.kernel.org/show_bug.cgi?id=215361 Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ether.c | 12 ++++++++++++ drivers/net/usb/zaurus.c | 12 ++++++++++++ 2 files changed, 24 insertions(+) diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index eb3817d70f2b88..9b4dfa3001d6ea 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -583,6 +583,11 @@ static const struct usb_device_id products[] = { .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \ .bInterfaceProtocol = USB_CDC_PROTO_NONE +#define ZAURUS_FAKE_INTERFACE \ + .bInterfaceClass = USB_CLASS_COMM, \ + .bInterfaceSubClass = USB_CDC_SUBCLASS_MDLM, \ + .bInterfaceProtocol = USB_CDC_PROTO_NONE + /* SA-1100 based Sharp Zaurus ("collie"), or compatible; * wire-incompatible with true CDC Ethernet implementations. * (And, it seems, needlessly so...) @@ -636,6 +641,13 @@ static const struct usb_device_id products[] = { .idProduct = 0x9032, /* SL-6000 */ ZAURUS_MASTER_INTERFACE, .driver_info = 0, +}, { + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO + | USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = 0x04DD, + .idProduct = 0x9032, /* SL-6000 */ + ZAURUS_FAKE_INTERFACE, + .driver_info = 0, }, { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | USB_DEVICE_ID_MATCH_DEVICE, diff --git a/drivers/net/usb/zaurus.c b/drivers/net/usb/zaurus.c index 8e717a0b559b3a..7984f2157d222d 100644 --- a/drivers/net/usb/zaurus.c +++ b/drivers/net/usb/zaurus.c @@ -256,6 +256,11 @@ static const struct usb_device_id products [] = { .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \ .bInterfaceProtocol = USB_CDC_PROTO_NONE +#define ZAURUS_FAKE_INTERFACE \ + .bInterfaceClass = USB_CLASS_COMM, \ + .bInterfaceSubClass = USB_CDC_SUBCLASS_MDLM, \ + .bInterfaceProtocol = USB_CDC_PROTO_NONE + /* SA-1100 based Sharp Zaurus ("collie"), or compatible. */ { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO @@ -313,6 +318,13 @@ static const struct usb_device_id products [] = { .idProduct = 0x9032, /* SL-6000 */ ZAURUS_MASTER_INTERFACE, .driver_info = ZAURUS_PXA_INFO, +}, { + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO + | USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = 0x04DD, + .idProduct = 0x9032, /* SL-6000 */ + ZAURUS_FAKE_INTERFACE, + .driver_info = (unsigned long)&bogus_mdlm_info, }, { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | USB_DEVICE_ID_MATCH_DEVICE, From 0cf74235f4403b760a37f77271d2ca3424001ff9 Mon Sep 17 00:00:00 2001 From: Basavaraj Natikar Date: Tue, 8 Feb 2022 17:51:08 +0530 Subject: [PATCH 168/493] HID: amd_sfh: Handle amd_sfh work buffer in PM ops Since in the current amd_sfh design the sensor data is periodically obtained in the form of poll data, during the suspend/resume cycle, scheduling a delayed work adds no value. So, cancel the work and restart back during the suspend/resume cycle respectively. Signed-off-by: Basavaraj Natikar Signed-off-by: Jiri Kosina --- drivers/hid/amd-sfh-hid/amd_sfh_pcie.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c index d3f32ffe299a8c..dacac30a6b27ac 100644 --- a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c +++ b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c @@ -290,6 +290,8 @@ static int __maybe_unused amd_mp2_pci_resume(struct device *dev) } } + schedule_delayed_work(&cl_data->work_buffer, msecs_to_jiffies(AMD_SFH_IDLE_LOOP)); + return 0; } @@ -312,6 +314,8 @@ static int __maybe_unused amd_mp2_pci_suspend(struct device *dev) } } + cancel_delayed_work_sync(&cl_data->work_buffer); + return 0; } From aa0b724a2bf041036e56cbb3b4b3afde7c5e7c9e Mon Sep 17 00:00:00 2001 From: Basavaraj Natikar Date: Tue, 8 Feb 2022 17:51:09 +0530 Subject: [PATCH 169/493] HID: amd_sfh: Correct the structure field name Misinterpreted intr_enable field name. Hence correct the structure field name accordingly to reflect the functionality. Fixes: f264481ad614 ("HID: amd_sfh: Extend driver capabilities for multi-generation support") Signed-off-by: Basavaraj Natikar Signed-off-by: Jiri Kosina --- drivers/hid/amd-sfh-hid/amd_sfh_pcie.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h index ae30e059f8475d..8a9c544c27aefa 100644 --- a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h +++ b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h @@ -49,7 +49,7 @@ union sfh_cmd_base { } s; struct { u32 cmd_id : 4; - u32 intr_enable : 1; + u32 intr_disable : 1; u32 rsvd1 : 3; u32 length : 7; u32 mem_type : 1; From b300667b33b2b5a2c8e5f8f22826befb3d7f4f2b Mon Sep 17 00:00:00 2001 From: Basavaraj Natikar Date: Tue, 8 Feb 2022 17:51:10 +0530 Subject: [PATCH 170/493] HID: amd_sfh: Disable the interrupt for all command Sensor data is processed in polling mode. Hence disable the interrupt for all sensor command. Signed-off-by: Basavaraj Natikar Signed-off-by: Jiri Kosina --- drivers/hid/amd-sfh-hid/amd_sfh_pcie.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c index dacac30a6b27ac..16670e910014bc 100644 --- a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c +++ b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c @@ -53,6 +53,7 @@ static void amd_start_sensor_v2(struct amd_mp2_dev *privdata, struct amd_mp2_sen cmd_base.ul = 0; cmd_base.cmd_v2.cmd_id = ENABLE_SENSOR; + cmd_base.cmd_v2.intr_disable = 1; cmd_base.cmd_v2.period = info.period; cmd_base.cmd_v2.sensor_id = info.sensor_idx; cmd_base.cmd_v2.length = 16; @@ -70,6 +71,7 @@ static void amd_stop_sensor_v2(struct amd_mp2_dev *privdata, u16 sensor_idx) cmd_base.ul = 0; cmd_base.cmd_v2.cmd_id = DISABLE_SENSOR; + cmd_base.cmd_v2.intr_disable = 1; cmd_base.cmd_v2.period = 0; cmd_base.cmd_v2.sensor_id = sensor_idx; cmd_base.cmd_v2.length = 16; @@ -83,6 +85,7 @@ static void amd_stop_all_sensor_v2(struct amd_mp2_dev *privdata) union sfh_cmd_base cmd_base; cmd_base.cmd_v2.cmd_id = STOP_ALL_SENSORS; + cmd_base.cmd_v2.intr_disable = 1; cmd_base.cmd_v2.period = 0; cmd_base.cmd_v2.sensor_id = 0; From fb75a3791a8032848c987db29b622878d8fe2b1c Mon Sep 17 00:00:00 2001 From: Basavaraj Natikar Date: Tue, 8 Feb 2022 17:51:11 +0530 Subject: [PATCH 171/493] HID: amd_sfh: Add functionality to clear interrupts Newer AMD platforms with SFH may generate interrupts on some events which are unwarranted. Until this is cleared the actual MP2 data processing maybe stalled in some cases. Add a mechanism to clear the pending interrupts (if any) during the driver initialization and sensor command operations. Signed-off-by: Basavaraj Natikar Signed-off-by: Jiri Kosina --- drivers/hid/amd-sfh-hid/amd_sfh_pcie.c | 25 ++++++++++++++++++++++++- drivers/hid/amd-sfh-hid/amd_sfh_pcie.h | 1 + 2 files changed, 25 insertions(+), 1 deletion(-) diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c index 16670e910014bc..7236b223fb68ea 100644 --- a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c +++ b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c @@ -92,6 +92,20 @@ static void amd_stop_all_sensor_v2(struct amd_mp2_dev *privdata) writel(cmd_base.ul, privdata->mmio + AMD_C2P_MSG0); } +static void amd_sfh_clear_intr_v2(struct amd_mp2_dev *privdata) +{ + if (readl(privdata->mmio + AMD_P2C_MSG(4))) { + writel(0, privdata->mmio + AMD_P2C_MSG(4)); + writel(0xf, privdata->mmio + AMD_P2C_MSG(5)); + } +} + +static void amd_sfh_clear_intr(struct amd_mp2_dev *privdata) +{ + if (privdata->mp2_ops->clear_intr) + privdata->mp2_ops->clear_intr(privdata); +} + void amd_start_sensor(struct amd_mp2_dev *privdata, struct amd_mp2_sensor_info info) { union sfh_cmd_param cmd_param; @@ -196,6 +210,7 @@ static void amd_mp2_pci_remove(void *privdata) struct amd_mp2_dev *mp2 = privdata; amd_sfh_hid_client_deinit(privdata); mp2->mp2_ops->stop_all(mp2); + amd_sfh_clear_intr(mp2); } static const struct amd_mp2_ops amd_sfh_ops_v2 = { @@ -203,6 +218,7 @@ static const struct amd_mp2_ops amd_sfh_ops_v2 = { .stop = amd_stop_sensor_v2, .stop_all = amd_stop_all_sensor_v2, .response = amd_sfh_wait_response_v2, + .clear_intr = amd_sfh_clear_intr_v2, }; static const struct amd_mp2_ops amd_sfh_ops = { @@ -265,8 +281,13 @@ static int amd_mp2_pci_probe(struct pci_dev *pdev, const struct pci_device_id *i mp2_select_ops(privdata); rc = amd_sfh_hid_client_init(privdata); - if (rc) + if (rc) { + amd_sfh_clear_intr(privdata); + dev_err(&pdev->dev, "amd_sfh_hid_client_init failed\n"); return rc; + } + + amd_sfh_clear_intr(privdata); return devm_add_action_or_reset(&pdev->dev, amd_mp2_pci_remove, privdata); } @@ -294,6 +315,7 @@ static int __maybe_unused amd_mp2_pci_resume(struct device *dev) } schedule_delayed_work(&cl_data->work_buffer, msecs_to_jiffies(AMD_SFH_IDLE_LOOP)); + amd_sfh_clear_intr(mp2); return 0; } @@ -318,6 +340,7 @@ static int __maybe_unused amd_mp2_pci_suspend(struct device *dev) } cancel_delayed_work_sync(&cl_data->work_buffer); + amd_sfh_clear_intr(mp2); return 0; } diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h index 8a9c544c27aefa..61de09ba51242e 100644 --- a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h +++ b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h @@ -141,5 +141,6 @@ struct amd_mp2_ops { void (*stop)(struct amd_mp2_dev *privdata, u16 sensor_idx); void (*stop_all)(struct amd_mp2_dev *privdata); int (*response)(struct amd_mp2_dev *mp2, u8 sid, u32 sensor_sts); + void (*clear_intr)(struct amd_mp2_dev *privdata); }; #endif From 7f016b35ca7623c71b31facdde080e8ce171a697 Mon Sep 17 00:00:00 2001 From: Basavaraj Natikar Date: Tue, 8 Feb 2022 17:51:12 +0530 Subject: [PATCH 172/493] HID: amd_sfh: Add interrupt handler to process interrupts On newer AMD platforms with SFH, it is observed that random interrupts get generated on the SFH hardware and until this is cleared the firmware sensor processing is stalled, resulting in no data been received to driver side. Add routines to handle these interrupts, so that firmware operations are not stalled. Signed-off-by: Basavaraj Natikar Signed-off-by: Jiri Kosina --- drivers/hid/amd-sfh-hid/amd_sfh_pcie.c | 40 ++++++++++++++++++++++++++ drivers/hid/amd-sfh-hid/amd_sfh_pcie.h | 1 + 2 files changed, 41 insertions(+) diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c index 7236b223fb68ea..19fa734a9a793a 100644 --- a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c +++ b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c @@ -106,6 +106,30 @@ static void amd_sfh_clear_intr(struct amd_mp2_dev *privdata) privdata->mp2_ops->clear_intr(privdata); } +static irqreturn_t amd_sfh_irq_handler(int irq, void *data) +{ + amd_sfh_clear_intr(data); + + return IRQ_HANDLED; +} + +static int amd_sfh_irq_init_v2(struct amd_mp2_dev *privdata) +{ + int rc; + + pci_intx(privdata->pdev, true); + + rc = devm_request_irq(&privdata->pdev->dev, privdata->pdev->irq, + amd_sfh_irq_handler, 0, DRIVER_NAME, privdata); + if (rc) { + dev_err(&privdata->pdev->dev, "failed to request irq %d err=%d\n", + privdata->pdev->irq, rc); + return rc; + } + + return 0; +} + void amd_start_sensor(struct amd_mp2_dev *privdata, struct amd_mp2_sensor_info info) { union sfh_cmd_param cmd_param; @@ -210,6 +234,7 @@ static void amd_mp2_pci_remove(void *privdata) struct amd_mp2_dev *mp2 = privdata; amd_sfh_hid_client_deinit(privdata); mp2->mp2_ops->stop_all(mp2); + pci_intx(mp2->pdev, false); amd_sfh_clear_intr(mp2); } @@ -219,6 +244,7 @@ static const struct amd_mp2_ops amd_sfh_ops_v2 = { .stop_all = amd_stop_all_sensor_v2, .response = amd_sfh_wait_response_v2, .clear_intr = amd_sfh_clear_intr_v2, + .init_intr = amd_sfh_irq_init_v2, }; static const struct amd_mp2_ops amd_sfh_ops = { @@ -244,6 +270,14 @@ static void mp2_select_ops(struct amd_mp2_dev *privdata) } } +static int amd_sfh_irq_init(struct amd_mp2_dev *privdata) +{ + if (privdata->mp2_ops->init_intr) + return privdata->mp2_ops->init_intr(privdata); + + return 0; +} + static int amd_mp2_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct amd_mp2_dev *privdata; @@ -280,6 +314,12 @@ static int amd_mp2_pci_probe(struct pci_dev *pdev, const struct pci_device_id *i mp2_select_ops(privdata); + rc = amd_sfh_irq_init(privdata); + if (rc) { + dev_err(&pdev->dev, "amd_sfh_irq_init failed\n"); + return rc; + } + rc = amd_sfh_hid_client_init(privdata); if (rc) { amd_sfh_clear_intr(privdata); diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h index 61de09ba51242e..97b99861fae251 100644 --- a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h +++ b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h @@ -142,5 +142,6 @@ struct amd_mp2_ops { void (*stop_all)(struct amd_mp2_dev *privdata); int (*response)(struct amd_mp2_dev *mp2, u8 sid, u32 sensor_sts); void (*clear_intr)(struct amd_mp2_dev *privdata); + int (*init_intr)(struct amd_mp2_dev *privdata); }; #endif From c49ae619905eebd3f54598a84e4cd2bd58ba8fe9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Mon, 14 Feb 2022 12:02:28 +0100 Subject: [PATCH 173/493] PCI: mvebu: Fix device enumeration regression MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Jan reported that on Turris Omnia (Armada 385), no PCIe devices were detected after upgrading from v5.16.1 to v5.16.3 and identified the cause as the backport of 91a8d79fc797 ("PCI: mvebu: Fix configuring secondary bus of PCIe Root Port via emulated bridge"), which appeared in v5.17-rc1. 91a8d79fc797 was incorrectly applied from mailing list patch [1] to the linux git repository [2] probably due to resolving merge conflicts incorrectly. Fix it now. [1] https://lore.kernel.org/r/20211125124605.25915-12-pali@kernel.org [2] https://git.kernel.org/linus/91a8d79fc797 [bhelgaas: commit log] BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215540 Fixes: 91a8d79fc797 ("PCI: mvebu: Fix configuring secondary bus of PCIe Root Port via emulated bridge") Link: https://lore.kernel.org/r/20220214110228.25825-1-pali@kernel.org Link: https://lore.kernel.org/r/20220127234917.GA150851@bhelgaas Reported-by: Jan Palus Signed-off-by: Pali Rohár Signed-off-by: Bjorn Helgaas --- drivers/pci/controller/pci-mvebu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c index 71258ea3d35f36..f8e82c5e2d878b 100644 --- a/drivers/pci/controller/pci-mvebu.c +++ b/drivers/pci/controller/pci-mvebu.c @@ -1329,7 +1329,8 @@ static int mvebu_pcie_probe(struct platform_device *pdev) * indirectly via kernel emulated PCI bridge driver. */ mvebu_pcie_setup_hw(port); - mvebu_pcie_set_local_dev_nr(port, 0); + mvebu_pcie_set_local_dev_nr(port, 1); + mvebu_pcie_set_local_bus_nr(port, 0); } pcie->nports = i; From 0c6f4ebf8835d01866eb686d47578cde80097981 Mon Sep 17 00:00:00 2001 From: Ronnie Sahlberg Date: Mon, 14 Feb 2022 08:40:52 +1000 Subject: [PATCH 174/493] cifs: modefromsids must add an ACE for authenticated users When we create a file with modefromsids we set an ACL that has one ACE for the magic modefromsid as well as a second ACE that grants full access to all authenticated users. When later we chante the mode on the file we strip away this, and other, ACE for authenticated users in set_chmod_dacl() and then just add back/update the modefromsid ACE. Thus leaving the file with a single ACE that is for the mode and no ACE to grant any user any rights to access the file. Fix this by always adding back also the modefromsid ACE so that we do not drop the rights to access the file. Signed-off-by: Ronnie Sahlberg Reviewed-by: Shyam Prasad N Signed-off-by: Steve French --- fs/cifs/cifsacl.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c index 5df21d63dd04e8..bf861fef2f0c35 100644 --- a/fs/cifs/cifsacl.c +++ b/fs/cifs/cifsacl.c @@ -949,6 +949,9 @@ static void populate_new_aces(char *nacl_base, pnntace = (struct cifs_ace *) (nacl_base + nsize); nsize += setup_special_mode_ACE(pnntace, nmode); num_aces++; + pnntace = (struct cifs_ace *) (nacl_base + nsize); + nsize += setup_authusers_ACE(pnntace); + num_aces++; goto set_size; } @@ -1613,7 +1616,7 @@ id_mode_to_cifs_acl(struct inode *inode, const char *path, __u64 *pnmode, nsecdesclen = secdesclen; if (pnmode && *pnmode != NO_CHANGE_64) { /* chmod */ if (mode_from_sid) - nsecdesclen += sizeof(struct cifs_ace); + nsecdesclen += 2 * sizeof(struct cifs_ace); else /* cifsacl */ nsecdesclen += 5 * sizeof(struct cifs_ace); } else { /* chown */ From 21bffcb76ee2fbafc7d5946cef10abc9df5cfff7 Mon Sep 17 00:00:00 2001 From: Sherry Yang Date: Thu, 10 Feb 2022 12:30:49 -0800 Subject: [PATCH 175/493] selftests/seccomp: Fix seccomp failure by adding missing headers seccomp_bpf failed on tests 47 global.user_notification_filter_empty and 48 global.user_notification_filter_empty_threaded when it's tested on updated kernel but with old kernel headers. Because old kernel headers don't have definition of macro __NR_clone3 which is required for these two tests. Since under selftests/, we can install headers once for all tests (the default INSTALL_HDR_PATH is usr/include), fix it by adding usr/include to the list of directories to be searched. Use "-isystem" to indicate it's a system directory as the real kernel headers directories are. Signed-off-by: Sherry Yang Tested-by: Sherry Yang Reviewed-by: Kees Cook Signed-off-by: Shuah Khan --- tools/testing/selftests/seccomp/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/seccomp/Makefile b/tools/testing/selftests/seccomp/Makefile index 0ebfe8b0e147fa..585f7a0c10cbea 100644 --- a/tools/testing/selftests/seccomp/Makefile +++ b/tools/testing/selftests/seccomp/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 -CFLAGS += -Wl,-no-as-needed -Wall +CFLAGS += -Wl,-no-as-needed -Wall -isystem ../../../../usr/include/ LDFLAGS += -lpthread TEST_GEN_PROGS := seccomp_bpf seccomp_benchmark From 6e8793674bb0d1135ca0e5c9f7e16fecbf815926 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 14 Feb 2022 10:00:19 -0800 Subject: [PATCH 176/493] serial: parisc: GSC: fix build when IOSAPIC is not set There is a build error when using a kernel .config file from 'kernel test robot' for a different build problem: hppa64-linux-ld: drivers/tty/serial/8250/8250_gsc.o: in function `.LC3': (.data.rel.ro+0x18): undefined reference to `iosapic_serial_irq' when: CONFIG_GSC=y CONFIG_SERIO_GSCPS2=y CONFIG_SERIAL_8250_GSC=y CONFIG_PCI is not set and hence PCI_LBA is not set. IOSAPIC depends on PCI_LBA, so IOSAPIC is not set/enabled. Make the use of iosapic_serial_irq() conditional to fix the build error. Signed-off-by: Randy Dunlap Reported-by: kernel test robot Cc: "James E.J. Bottomley" Cc: Helge Deller Cc: linux-parisc@vger.kernel.org Cc: Greg Kroah-Hartman Cc: linux-serial@vger.kernel.org Cc: Jiri Slaby Cc: Johan Hovold Suggested-by: Helge Deller Signed-off-by: Helge Deller Cc: stable@vger.kernel.org Signed-off-by: Helge Deller --- drivers/tty/serial/8250/8250_gsc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/8250/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c index 673cda3d011d0c..948d0a1c6ae8ed 100644 --- a/drivers/tty/serial/8250/8250_gsc.c +++ b/drivers/tty/serial/8250/8250_gsc.c @@ -26,7 +26,7 @@ static int __init serial_init_chip(struct parisc_device *dev) unsigned long address; int err; -#ifdef CONFIG_64BIT +#if defined(CONFIG_64BIT) && defined(CONFIG_IOSAPIC) if (!dev->irq && (dev->id.sversion == 0xad)) dev->irq = iosapic_serial_irq(dev); #endif From 4f6de676d94ee8ddfc2e7e7cd935fc7cb2feff3a Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Mon, 14 Feb 2022 18:56:43 +0100 Subject: [PATCH 177/493] arm64: Correct wrong label in macro __init_el2_gicv3 In commit: 114945d84a30a5fe ("arm64: Fix labels in el2_setup macros") We renamed a label from '1' to '.Lskip_gicv3_\@', but failed to update a branch to it, which now targets a later label also called '1'. The branch is taken rarely, when GICv3 is present but SRE is disabled at EL3, causing a boot-time crash. Update the caller to the new label name. Fixes: 114945d84a30 ("arm64: Fix labels in el2_setup macros") Cc: # 5.12.x Signed-off-by: Joakim Tjernlund Link: https://lore.kernel.org/r/20220214175643.21931-1-joakim.tjernlund@infinera.com Reviewed-by: Mark Rutland Reviewed-by: Marc Zyngier Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/el2_setup.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/include/asm/el2_setup.h b/arch/arm64/include/asm/el2_setup.h index 3198acb2aad8c5..7f3c87f7a0cec7 100644 --- a/arch/arm64/include/asm/el2_setup.h +++ b/arch/arm64/include/asm/el2_setup.h @@ -106,7 +106,7 @@ msr_s SYS_ICC_SRE_EL2, x0 isb // Make sure SRE is now set mrs_s x0, SYS_ICC_SRE_EL2 // Read SRE back, - tbz x0, #0, 1f // and check that it sticks + tbz x0, #0, .Lskip_gicv3_\@ // and check that it sticks msr_s SYS_ICH_HCR_EL2, xzr // Reset ICC_HCR_EL2 to defaults .Lskip_gicv3_\@: .endm From 0bc2ba49101f4ca35e0c878968adb5660ffa2517 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Tue, 8 Feb 2022 23:11:17 +0100 Subject: [PATCH 178/493] MAINTAINERS: Update Jiri's email address Using my kernel.org email. Signed-off-by: Jiri Olsa Cc: Alexander Shishkin Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lore.kernel.org/lkml/20220208221117.710405-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index fca970a46e77af..52346a2b8c9521 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15147,7 +15147,7 @@ M: Ingo Molnar M: Arnaldo Carvalho de Melo R: Mark Rutland R: Alexander Shishkin -R: Jiri Olsa +R: Jiri Olsa R: Namhyung Kim L: linux-perf-users@vger.kernel.org L: linux-kernel@vger.kernel.org From 05c7b7a92cc87ff8d7fde189d0fade250697573c Mon Sep 17 00:00:00 2001 From: Zhang Qiao Date: Fri, 21 Jan 2022 18:12:10 +0800 Subject: [PATCH 179/493] cgroup/cpuset: Fix a race between cpuset_attach() and cpu hotplug MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As previously discussed(https://lkml.org/lkml/2022/1/20/51), cpuset_attach() is affected with similar cpu hotplug race, as follow scenario: cpuset_attach() cpu hotplug --------------------------- ---------------------- down_write(cpuset_rwsem) guarantee_online_cpus() // (load cpus_attach) sched_cpu_deactivate set_cpu_active() // will change cpu_active_mask set_cpus_allowed_ptr(cpus_attach) __set_cpus_allowed_ptr_locked() // (if the intersection of cpus_attach and cpu_active_mask is empty, will return -EINVAL) up_write(cpuset_rwsem) To avoid races such as described above, protect cpuset_attach() call with cpu_hotplug_lock. Fixes: be367d099270 ("cgroups: let ss->can_attach and ss->attach do whole threadgroups at a time") Cc: stable@vger.kernel.org # v2.6.32+ Reported-by: Zhao Gongyi Signed-off-by: Zhang Qiao Acked-by: Waiman Long Reviewed-by: Michal Koutný Signed-off-by: Tejun Heo --- kernel/cgroup/cpuset.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/cgroup/cpuset.c b/kernel/cgroup/cpuset.c index 4c7254e8f49a54..97c53f3cc91740 100644 --- a/kernel/cgroup/cpuset.c +++ b/kernel/cgroup/cpuset.c @@ -2289,6 +2289,7 @@ static void cpuset_attach(struct cgroup_taskset *tset) cgroup_taskset_first(tset, &css); cs = css_cs(css); + cpus_read_lock(); percpu_down_write(&cpuset_rwsem); guarantee_online_mems(cs, &cpuset_attach_nodemask_to); @@ -2342,6 +2343,7 @@ static void cpuset_attach(struct cgroup_taskset *tset) wake_up(&cpuset_attach_wq); percpu_up_write(&cpuset_rwsem); + cpus_read_unlock(); } /* The various types of files and directories in a cpuset file system */ From 9d047bf68fe8cdb4086deaf4edd119731a9481ed Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 8 Feb 2022 12:14:44 -0500 Subject: [PATCH 180/493] NFS: Remove an incorrect revalidation in nfs4_update_changeattr_locked() In nfs4_update_changeattr_locked(), we don't need to set the NFS_INO_REVAL_PAGECACHE flag, because we already know the value of the change attribute, and we're already flagging the size. In fact, this forces us to revalidate the change attribute a second time for no good reason. This extra flag appears to have been introduced as part of the xattr feature, when update_changeattr_locked() was converted for use by the xattr code. Fixes: 1b523ca972ed ("nfs: modify update_changeattr to deal with regular files") Signed-off-by: Trond Myklebust Signed-off-by: Anna Schumaker --- fs/nfs/nfs4proc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index f5020828ab651e..0e0db6c2761961 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -1229,8 +1229,7 @@ nfs4_update_changeattr_locked(struct inode *inode, NFS_INO_INVALID_ACCESS | NFS_INO_INVALID_ACL | NFS_INO_INVALID_SIZE | NFS_INO_INVALID_OTHER | NFS_INO_INVALID_BLOCKS | NFS_INO_INVALID_NLINK | - NFS_INO_INVALID_MODE | NFS_INO_INVALID_XATTR | - NFS_INO_REVAL_PAGECACHE; + NFS_INO_INVALID_MODE | NFS_INO_INVALID_XATTR; nfsi->attrtimeo = NFS_MINATTRTIMEO(inode); } nfsi->attrtimeo_timestamp = jiffies; From e0caaf75d443e02e55e146fd75fe2efc8aed5540 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 8 Feb 2022 13:38:23 -0500 Subject: [PATCH 181/493] NFS: LOOKUP_DIRECTORY is also ok with symlinks Commit ac795161c936 (NFSv4: Handle case where the lookup of a directory fails) [1], part of Linux since 5.17-rc2, introduced a regression, where a symbolic link on an NFS mount to a directory on another NFS does not resolve(?) the first time it is accessed: Reported-by: Paul Menzel Fixes: ac795161c936 ("NFSv4: Handle case where the lookup of a directory fails") Signed-off-by: Trond Myklebust Tested-by: Donald Buczek Signed-off-by: Anna Schumaker --- fs/nfs/dir.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 7bc7cf6b26f091..75cb1cbe4cdeaa 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -2010,14 +2010,14 @@ int nfs_atomic_open(struct inode *dir, struct dentry *dentry, if (!res) { inode = d_inode(dentry); if ((lookup_flags & LOOKUP_DIRECTORY) && inode && - !S_ISDIR(inode->i_mode)) + !(S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode))) res = ERR_PTR(-ENOTDIR); else if (inode && S_ISREG(inode->i_mode)) res = ERR_PTR(-EOPENSTALE); } else if (!IS_ERR(res)) { inode = d_inode(res); if ((lookup_flags & LOOKUP_DIRECTORY) && inode && - !S_ISDIR(inode->i_mode)) { + !(S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode))) { dput(res); res = ERR_PTR(-ENOTDIR); } else if (inode && S_ISREG(inode->i_mode)) { From 0136f5844b006e2286f873457c3fcba8c45a3735 Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Tue, 18 Jan 2022 14:07:51 +0800 Subject: [PATCH 182/493] drm/amd/pm: correct UMD pstate clocks for Dimgrey Cavefish and Beige Goby Correct the UMD pstate profiling clocks for Dimgrey Cavefish and Beige Goby. Signed-off-by: Evan Quan Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- .../amd/pm/swsmu/smu11/sienna_cichlid_ppt.c | 26 +++++++++++++++---- .../amd/pm/swsmu/smu11/sienna_cichlid_ppt.h | 8 ++++++ 2 files changed, 29 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c index a4207293158c5d..2320bd7508767c 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c @@ -1238,21 +1238,37 @@ static int sienna_cichlid_populate_umd_state_clk(struct smu_context *smu) &dpm_context->dpm_tables.soc_table; struct smu_umd_pstate_table *pstate_table = &smu->pstate_table; + struct amdgpu_device *adev = smu->adev; pstate_table->gfxclk_pstate.min = gfx_table->min; pstate_table->gfxclk_pstate.peak = gfx_table->max; - if (gfx_table->max >= SIENNA_CICHLID_UMD_PSTATE_PROFILING_GFXCLK) - pstate_table->gfxclk_pstate.standard = SIENNA_CICHLID_UMD_PSTATE_PROFILING_GFXCLK; pstate_table->uclk_pstate.min = mem_table->min; pstate_table->uclk_pstate.peak = mem_table->max; - if (mem_table->max >= SIENNA_CICHLID_UMD_PSTATE_PROFILING_MEMCLK) - pstate_table->uclk_pstate.standard = SIENNA_CICHLID_UMD_PSTATE_PROFILING_MEMCLK; pstate_table->socclk_pstate.min = soc_table->min; pstate_table->socclk_pstate.peak = soc_table->max; - if (soc_table->max >= SIENNA_CICHLID_UMD_PSTATE_PROFILING_SOCCLK) + + switch (adev->asic_type) { + case CHIP_SIENNA_CICHLID: + case CHIP_NAVY_FLOUNDER: + pstate_table->gfxclk_pstate.standard = SIENNA_CICHLID_UMD_PSTATE_PROFILING_GFXCLK; + pstate_table->uclk_pstate.standard = SIENNA_CICHLID_UMD_PSTATE_PROFILING_MEMCLK; pstate_table->socclk_pstate.standard = SIENNA_CICHLID_UMD_PSTATE_PROFILING_SOCCLK; + break; + case CHIP_DIMGREY_CAVEFISH: + pstate_table->gfxclk_pstate.standard = DIMGREY_CAVEFISH_UMD_PSTATE_PROFILING_GFXCLK; + pstate_table->uclk_pstate.standard = DIMGREY_CAVEFISH_UMD_PSTATE_PROFILING_MEMCLK; + pstate_table->socclk_pstate.standard = DIMGREY_CAVEFISH_UMD_PSTATE_PROFILING_SOCCLK; + break; + case CHIP_BEIGE_GOBY: + pstate_table->gfxclk_pstate.standard = BEIGE_GOBY_UMD_PSTATE_PROFILING_GFXCLK; + pstate_table->uclk_pstate.standard = BEIGE_GOBY_UMD_PSTATE_PROFILING_MEMCLK; + pstate_table->socclk_pstate.standard = BEIGE_GOBY_UMD_PSTATE_PROFILING_SOCCLK; + break; + default: + break; + } return 0; } diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.h b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.h index 38cd0ece24f6b1..42f705c7a36f81 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.h +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.h @@ -33,6 +33,14 @@ typedef enum { #define SIENNA_CICHLID_UMD_PSTATE_PROFILING_SOCCLK 960 #define SIENNA_CICHLID_UMD_PSTATE_PROFILING_MEMCLK 1000 +#define DIMGREY_CAVEFISH_UMD_PSTATE_PROFILING_GFXCLK 1950 +#define DIMGREY_CAVEFISH_UMD_PSTATE_PROFILING_SOCCLK 960 +#define DIMGREY_CAVEFISH_UMD_PSTATE_PROFILING_MEMCLK 676 + +#define BEIGE_GOBY_UMD_PSTATE_PROFILING_GFXCLK 2200 +#define BEIGE_GOBY_UMD_PSTATE_PROFILING_SOCCLK 960 +#define BEIGE_GOBY_UMD_PSTATE_PROFILING_MEMCLK 1000 + extern void sienna_cichlid_set_ppt_funcs(struct smu_context *smu); #endif From f8f4e2a518347063179def4e64580b2d28233d03 Mon Sep 17 00:00:00 2001 From: Rajib Mahapatra Date: Thu, 10 Feb 2022 18:46:40 +0530 Subject: [PATCH 183/493] drm/amdgpu: skipping SDMA hw_init and hw_fini for S0ix. [Why] SDMA ring buffer test failed if suspend is aborted during S0i3 resume. [How] If suspend is aborted for some reason during S0i3 resume cycle, it follows SDMA ring test failing and errors in amdgpu resume. For RN/CZN/Picasso, SMU saves and restores SDMA registers during S0ix cycle. So, skipping SDMA suspend and resume from driver solves the issue. This time, the system is able to resume gracefully even the suspend is aborted. Reviewed-by: Mario Limonciello Reviewed-by: Alex Deucher Signed-off-by: Rajib Mahapatra Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c index e8e4749e9c7972..f0638db57111de 100644 --- a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c @@ -2057,6 +2057,10 @@ static int sdma_v4_0_suspend(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; + /* SMU saves SDMA state for us */ + if (adev->in_s0ix) + return 0; + return sdma_v4_0_hw_fini(adev); } @@ -2064,6 +2068,10 @@ static int sdma_v4_0_resume(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; + /* SMU restores SDMA state for us */ + if (adev->in_s0ix) + return 0; + return sdma_v4_0_hw_init(adev); } From 9c4f59ea3f865693150edf0c91d1cc6b451360dd Mon Sep 17 00:00:00 2001 From: Yifan Zhang Date: Fri, 11 Feb 2022 17:58:08 +0800 Subject: [PATCH 184/493] drm/amd/pm: correct the sequence of sending gpu reset msg the 2nd parameter should be smu msg type rather than asic msg index. Fixes: 7d38d9dc4ecc ("drm/amdgpu: add mode2 reset support for yellow carp") Signed-off-by: Yifan Zhang Acked-by: Aaron Liu Reviewed-by: Huang Rui Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c index caf1775d48ef6a..0bc84b709a935c 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c @@ -282,14 +282,9 @@ static int yellow_carp_post_smu_init(struct smu_context *smu) static int yellow_carp_mode_reset(struct smu_context *smu, int type) { - int ret = 0, index = 0; - - index = smu_cmn_to_asic_specific_index(smu, CMN2ASIC_MAPPING_MSG, - SMU_MSG_GfxDeviceDriverReset); - if (index < 0) - return index == -EACCES ? 0 : index; + int ret = 0; - ret = smu_cmn_send_smc_msg_with_param(smu, (uint16_t)index, type, NULL); + ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_GfxDeviceDriverReset, type, NULL); if (ret) dev_err(smu->adev->dev, "Failed to mode reset!\n"); From 364438fd629f7611a84c8e6d7de91659300f1502 Mon Sep 17 00:00:00 2001 From: Nicholas Bishop Date: Fri, 11 Feb 2022 14:57:39 -0500 Subject: [PATCH 185/493] drm/radeon: Fix backlight control on iMac 12,1 The iMac 12,1 does not use the gmux driver for backlight, so the radeon backlight device is needed to set the brightness. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1838 Signed-off-by: Nicholas Bishop Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/atombios_encoders.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c index 0fce73b9a64691..70bd84b7ef2b0a 100644 --- a/drivers/gpu/drm/radeon/atombios_encoders.c +++ b/drivers/gpu/drm/radeon/atombios_encoders.c @@ -198,7 +198,8 @@ void radeon_atom_backlight_init(struct radeon_encoder *radeon_encoder, * so don't register a backlight device */ if ((rdev->pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE) && - (rdev->pdev->device == 0x6741)) + (rdev->pdev->device == 0x6741) && + !dmi_match(DMI_PRODUCT_NAME, "iMac12,1")) return; if (!radeon_encoder->enc_priv) From 12f4a665cc3568328728e46c3162873b5b69cd27 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 31 Jan 2022 14:26:20 +0100 Subject: [PATCH 186/493] RISC-V: Fix hartid mask handling for hartid 31 and up Jessica reports that using "1 << hartid" causes undefined behavior for hartid 31 and up. Fix this by using the BIT() helper instead of an explicit shift. Reported-by: Jessica Clarke Fixes: 26fb751ca37846c9 ("RISC-V: Do not use cpumask data structure for hartid bitmap") Signed-off-by: Geert Uytterhoeven Reviewed-by: Atish Patra Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/sbi.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c index f72527fcb34709..f93bc75f2bc43c 100644 --- a/arch/riscv/kernel/sbi.c +++ b/arch/riscv/kernel/sbi.c @@ -5,6 +5,7 @@ * Copyright (c) 2020 Western Digital Corporation or its affiliates. */ +#include #include #include #include @@ -85,7 +86,7 @@ static unsigned long __sbi_v01_cpumask_to_hartmask(const struct cpumask *cpu_mas pr_warn("Unable to send any request to hartid > BITS_PER_LONG for SBI v0.1\n"); break; } - hmask |= 1 << hartid; + hmask |= BIT(hartid); } return hmask; @@ -268,7 +269,7 @@ static int __sbi_send_ipi_v02(const struct cpumask *cpu_mask) } if (!hmask) hbase = hartid; - hmask |= 1UL << (hartid - hbase); + hmask |= BIT(hartid - hbase); } if (hmask) { @@ -362,7 +363,7 @@ static int __sbi_rfence_v02(int fid, const struct cpumask *cpu_mask, } if (!hmask) hbase = hartid; - hmask |= 1UL << (hartid - hbase); + hmask |= BIT(hartid - hbase); } if (hmask) { From 2b35d5b7d13062b805aa82dc53812a5f56249287 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 31 Jan 2022 14:26:21 +0100 Subject: [PATCH 187/493] RISC-V: Fix handling of empty cpu masks The cpumask rework slightly changed the behavior of the code. Fix this by treating an empty cpumask as meaning all online CPUs. Extracted from a patch by Atish Patra . Reported-by: Jessica Clarke Fixes: 26fb751ca37846c9 ("RISC-V: Do not use cpumask data structure for hartid bitmap") Signed-off-by: Geert Uytterhoeven Reviewed-by: Atish Patra Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/sbi.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c index f93bc75f2bc43c..22444cfcd56cc6 100644 --- a/arch/riscv/kernel/sbi.c +++ b/arch/riscv/kernel/sbi.c @@ -161,7 +161,7 @@ static int __sbi_send_ipi_v01(const struct cpumask *cpu_mask) { unsigned long hart_mask; - if (!cpu_mask) + if (!cpu_mask || cpumask_empty(cpu_mask)) cpu_mask = cpu_online_mask; hart_mask = __sbi_v01_cpumask_to_hartmask(cpu_mask); @@ -177,7 +177,7 @@ static int __sbi_rfence_v01(int fid, const struct cpumask *cpu_mask, int result = 0; unsigned long hart_mask; - if (!cpu_mask) + if (!cpu_mask || cpumask_empty(cpu_mask)) cpu_mask = cpu_online_mask; hart_mask = __sbi_v01_cpumask_to_hartmask(cpu_mask); @@ -254,7 +254,7 @@ static int __sbi_send_ipi_v02(const struct cpumask *cpu_mask) struct sbiret ret = {0}; int result; - if (!cpu_mask) + if (!cpu_mask || cpumask_empty(cpu_mask)) cpu_mask = cpu_online_mask; for_each_cpu(cpuid, cpu_mask) { @@ -348,7 +348,7 @@ static int __sbi_rfence_v02(int fid, const struct cpumask *cpu_mask, unsigned long hartid, cpuid, hmask = 0, hbase = 0; int result; - if (!cpu_mask) + if (!cpu_mask || cpumask_empty(cpu_mask)) cpu_mask = cpu_online_mask; for_each_cpu(cpuid, cpu_mask) { From 5feef64f4c67068c49f5409d43c67cabf2327f66 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 31 Jan 2022 14:26:22 +0100 Subject: [PATCH 188/493] RISC-V: Fix IPI/RFENCE hmask on non-monotonic hartid ordering If the boot CPU does not have the lowest hartid, "hartid - hbase" can become negative, leading to an incorrect hmask, causing userspace to crash with SEGV. This is observed on e.g. Starlight Beta, where cpuid 1 maps to hartid 0, and cpuid 0 maps to hartid 1. Fix this by detecting this case, and shifting the accumulated mask and updating hbase, if possible. Fixes: 26fb751ca37846c9 ("RISC-V: Do not use cpumask data structure for hartid bitmap") Signed-off-by: Geert Uytterhoeven Reviewed-by: Atish Patra Tested-by: Atish Patra Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/sbi.c | 57 ++++++++++++++++++++++++++++------------- 1 file changed, 39 insertions(+), 18 deletions(-) diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c index 22444cfcd56cc6..775d3322b422fe 100644 --- a/arch/riscv/kernel/sbi.c +++ b/arch/riscv/kernel/sbi.c @@ -250,7 +250,7 @@ static void __sbi_set_timer_v02(uint64_t stime_value) static int __sbi_send_ipi_v02(const struct cpumask *cpu_mask) { - unsigned long hartid, cpuid, hmask = 0, hbase = 0; + unsigned long hartid, cpuid, hmask = 0, hbase = 0, htop = 0; struct sbiret ret = {0}; int result; @@ -259,16 +259,27 @@ static int __sbi_send_ipi_v02(const struct cpumask *cpu_mask) for_each_cpu(cpuid, cpu_mask) { hartid = cpuid_to_hartid_map(cpuid); - if (hmask && ((hbase + BITS_PER_LONG) <= hartid)) { - ret = sbi_ecall(SBI_EXT_IPI, SBI_EXT_IPI_SEND_IPI, - hmask, hbase, 0, 0, 0, 0); - if (ret.error) - goto ecall_failed; - hmask = 0; - hbase = 0; + if (hmask) { + if (hartid + BITS_PER_LONG <= htop || + hbase + BITS_PER_LONG <= hartid) { + ret = sbi_ecall(SBI_EXT_IPI, + SBI_EXT_IPI_SEND_IPI, hmask, + hbase, 0, 0, 0, 0); + if (ret.error) + goto ecall_failed; + hmask = 0; + } else if (hartid < hbase) { + /* shift the mask to fit lower hartid */ + hmask <<= hbase - hartid; + hbase = hartid; + } } - if (!hmask) + if (!hmask) { hbase = hartid; + htop = hartid; + } else if (hartid > htop) { + htop = hartid; + } hmask |= BIT(hartid - hbase); } @@ -345,7 +356,7 @@ static int __sbi_rfence_v02(int fid, const struct cpumask *cpu_mask, unsigned long start, unsigned long size, unsigned long arg4, unsigned long arg5) { - unsigned long hartid, cpuid, hmask = 0, hbase = 0; + unsigned long hartid, cpuid, hmask = 0, hbase = 0, htop = 0; int result; if (!cpu_mask || cpumask_empty(cpu_mask)) @@ -353,16 +364,26 @@ static int __sbi_rfence_v02(int fid, const struct cpumask *cpu_mask, for_each_cpu(cpuid, cpu_mask) { hartid = cpuid_to_hartid_map(cpuid); - if (hmask && ((hbase + BITS_PER_LONG) <= hartid)) { - result = __sbi_rfence_v02_call(fid, hmask, hbase, - start, size, arg4, arg5); - if (result) - return result; - hmask = 0; - hbase = 0; + if (hmask) { + if (hartid + BITS_PER_LONG <= htop || + hbase + BITS_PER_LONG <= hartid) { + result = __sbi_rfence_v02_call(fid, hmask, + hbase, start, size, arg4, arg5); + if (result) + return result; + hmask = 0; + } else if (hartid < hbase) { + /* shift the mask to fit lower hartid */ + hmask <<= hbase - hartid; + hbase = hartid; + } } - if (!hmask) + if (!hmask) { hbase = hartid; + htop = hartid; + } else if (hartid > htop) { + htop = hartid; + } hmask |= BIT(hartid - hbase); } From 6fec1ab67f8d60704cc7de64abcfd389ab131542 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 14 Feb 2022 09:36:57 +0100 Subject: [PATCH 189/493] selftests/ftrace: Do not trace do_softirq because of PREEMPT_RT The PREEMPT_RT patchset does not use do_softirq() function thus trying to filter for do_softirq fails for such kernel: echo do_softirq ftracetest: 81: echo: echo: I/O error Choose some other visible function for the test. The function does not have to be actually executed during the test, because it is only testing filter API interface. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Shuah Khan Acked-by: Sebastian Andrzej Siewior Reviewed-by: Steven Rostedt (Google) Signed-off-by: Shuah Khan --- .../selftests/ftrace/test.d/ftrace/func_set_ftrace_file.tc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_set_ftrace_file.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_set_ftrace_file.tc index e96e279e0533a7..25432b8cd5bd25 100644 --- a/tools/testing/selftests/ftrace/test.d/ftrace/func_set_ftrace_file.tc +++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_set_ftrace_file.tc @@ -19,7 +19,7 @@ fail() { # mesg FILTER=set_ftrace_filter FUNC1="schedule" -FUNC2="do_softirq" +FUNC2="scheduler_tick" ALL_FUNCS="#### all functions enabled ####" From 7f4c5a26f735dea4bbc0eb8eb9da99cda95a8563 Mon Sep 17 00:00:00 2001 From: James Smart Date: Sat, 12 Feb 2022 08:31:20 -0800 Subject: [PATCH 190/493] scsi: lpfc: Fix pt2pt NVMe PRLI reject LOGO loop When connected point to point, the driver does not know the FC4's supported by the other end. In Fabrics, it can query the nameserver. Thus the driver must send PRLIs for the FC4s it supports and enable support based on the acc(ept) or rej(ect) of the respective FC4 PRLI. Currently the driver supports SCSI and NVMe PRLIs. Unfortunately, although the behavior is per standard, many devices have come to expect only SCSI PRLIs. In this particular example, the NVMe PRLI is properly RJT'd but the target decided that it must LOGO after seeing the unexpected NVMe PRLI. The LOGO causes the sequence to restart and login is now in an infinite failure loop. Fix the problem by having the driver, on a pt2pt link, remember NVMe PRLI accept or reject status across logout as long as the link stays "up". When retrying login, if the prior NVMe PRLI was rejected, it will not be sent on the next login. Link: https://lore.kernel.org/r/20220212163120.15385-1-jsmart2021@gmail.com Cc: # v5.4+ Reviewed-by: Ewan D. Milne Signed-off-by: James Smart Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc.h | 1 + drivers/scsi/lpfc/lpfc_attr.c | 3 +++ drivers/scsi/lpfc/lpfc_els.c | 20 +++++++++++++++++++- drivers/scsi/lpfc/lpfc_nportdisc.c | 5 +++-- 4 files changed, 26 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index a1e0a106c132bd..98cabe09c04045 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -592,6 +592,7 @@ struct lpfc_vport { #define FC_VPORT_LOGO_RCVD 0x200 /* LOGO received on vport */ #define FC_RSCN_DISCOVERY 0x400 /* Auth all devices after RSCN */ #define FC_LOGO_RCVD_DID_CHNG 0x800 /* FDISC on phys port detect DID chng*/ +#define FC_PT2PT_NO_NVME 0x1000 /* Don't send NVME PRLI */ #define FC_SCSI_SCAN_TMO 0x4000 /* scsi scan timer running */ #define FC_ABORT_DISCOVERY 0x8000 /* we want to abort discovery */ #define FC_NDISC_ACTIVE 0x10000 /* NPort discovery active */ diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index bac78fbce8d6ee..fa8415259cb8a4 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -1315,6 +1315,9 @@ lpfc_issue_lip(struct Scsi_Host *shost) pmboxq->u.mb.mbxCommand = MBX_DOWN_LINK; pmboxq->u.mb.mbxOwner = OWN_HOST; + if ((vport->fc_flag & FC_PT2PT) && (vport->fc_flag & FC_PT2PT_NO_NVME)) + vport->fc_flag &= ~FC_PT2PT_NO_NVME; + mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO * 2); if ((mbxstatus == MBX_SUCCESS) && diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index db5ccae1b63da3..f936833c990995 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -1072,7 +1072,8 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, /* FLOGI failed, so there is no fabric */ spin_lock_irq(shost->host_lock); - vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP); + vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP | + FC_PT2PT_NO_NVME); spin_unlock_irq(shost->host_lock); /* If private loop, then allow max outstanding els to be @@ -4607,6 +4608,23 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, /* Added for Vendor specifc support * Just keep retrying for these Rsn / Exp codes */ + if ((vport->fc_flag & FC_PT2PT) && + cmd == ELS_CMD_NVMEPRLI) { + switch (stat.un.b.lsRjtRsnCode) { + case LSRJT_UNABLE_TPC: + case LSRJT_INVALID_CMD: + case LSRJT_LOGICAL_ERR: + case LSRJT_CMD_UNSUPPORTED: + lpfc_printf_vlog(vport, KERN_WARNING, LOG_ELS, + "0168 NVME PRLI LS_RJT " + "reason %x port doesn't " + "support NVME, disabling NVME\n", + stat.un.b.lsRjtRsnCode); + retry = 0; + vport->fc_flag |= FC_PT2PT_NO_NVME; + goto out_retry; + } + } switch (stat.un.b.lsRjtRsnCode) { case LSRJT_UNABLE_TPC: /* The driver has a VALID PLOGI but the rport has diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index 7d717a4ac14d1f..fdf5e777bf113e 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -1961,8 +1961,9 @@ lpfc_cmpl_reglogin_reglogin_issue(struct lpfc_vport *vport, * is configured try it. */ ndlp->nlp_fc4_type |= NLP_FC4_FCP; - if ((vport->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) || - (vport->cfg_enable_fc4_type == LPFC_ENABLE_NVME)) { + if ((!(vport->fc_flag & FC_PT2PT_NO_NVME)) && + (vport->cfg_enable_fc4_type == LPFC_ENABLE_BOTH || + vport->cfg_enable_fc4_type == LPFC_ENABLE_NVME)) { ndlp->nlp_fc4_type |= NLP_FC4_NVME; /* We need to update the localport also */ lpfc_nvme_update_localport(vport); From 10af115646171afc0217177d6eae92917b785897 Mon Sep 17 00:00:00 2001 From: Jinyoung Choi Date: Mon, 14 Feb 2022 19:33:52 +0900 Subject: [PATCH 191/493] scsi: ufs: core: Fix divide by zero in ufshcd_map_queues() Before calling blk_mq_map_queues(), the mq_map and nr_queues belonging to struct blk_mq_queue_map must have a valid value. If nr_queues is set to 0, the system may encounter a divide by zero depending on the type of architecture. blk_mq_map_queues() -> queue_index() Link: https://lore.kernel.org/r/1891546521.01644873481638.JavaMail.epsvc@epcpadp4 Reviewed-by: Bart Van Assche Signed-off-by: Jinyoung Choi Signed-off-by: Martin K. Petersen --- drivers/scsi/ufs/ufshcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 50b12d60dc1b2d..9349557b8a01b4 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -2681,7 +2681,7 @@ static int ufshcd_map_queues(struct Scsi_Host *shost) break; case HCTX_TYPE_READ: map->nr_queues = 0; - break; + continue; default: WARN_ON_ONCE(true); } From 3c62fd3406e0b2277c76a6984d3979c7f3f1d129 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sat, 5 Feb 2022 07:58:44 +0100 Subject: [PATCH 192/493] dmaengine: ptdma: Fix the error handling path in pt_core_init() In order to free resources correctly in the error handling path of pt_core_init(), 2 goto's have to be switched. Otherwise, some resources will leak and we will try to release things that have not been allocated yet. Also move a dev_err() to a place where it is more meaningful. Fixes: fa5d823b16a9 ("dmaengine: ptdma: Initial driver for the AMD PTDMA") Signed-off-by: Christophe JAILLET Acked-by: Sanjay R Mehta Reviewed-by: Dan Carpenter Link: https://lore.kernel.org/r/41a963a35173f89c874f5c44df5530dc09fea8da.1644044244.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul --- drivers/dma/ptdma/ptdma-dev.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/dma/ptdma/ptdma-dev.c b/drivers/dma/ptdma/ptdma-dev.c index 8a6bf291a73fe7..daafea5bc35d9f 100644 --- a/drivers/dma/ptdma/ptdma-dev.c +++ b/drivers/dma/ptdma/ptdma-dev.c @@ -207,7 +207,7 @@ int pt_core_init(struct pt_device *pt) if (!cmd_q->qbase) { dev_err(dev, "unable to allocate command queue\n"); ret = -ENOMEM; - goto e_dma_alloc; + goto e_destroy_pool; } cmd_q->qidx = 0; @@ -229,8 +229,10 @@ int pt_core_init(struct pt_device *pt) /* Request an irq */ ret = request_irq(pt->pt_irq, pt_core_irq_handler, 0, dev_name(pt->dev), pt); - if (ret) - goto e_pool; + if (ret) { + dev_err(dev, "unable to allocate an IRQ\n"); + goto e_free_dma; + } /* Update the device registers with queue information. */ cmd_q->qcontrol &= ~CMD_Q_SIZE; @@ -250,21 +252,20 @@ int pt_core_init(struct pt_device *pt) /* Register the DMA engine support */ ret = pt_dmaengine_register(pt); if (ret) - goto e_dmaengine; + goto e_free_irq; /* Set up debugfs entries */ ptdma_debugfs_setup(pt); return 0; -e_dmaengine: +e_free_irq: free_irq(pt->pt_irq, pt); -e_dma_alloc: +e_free_dma: dma_free_coherent(dev, cmd_q->qsize, cmd_q->qbase, cmd_q->qbase_dma); -e_pool: - dev_err(dev, "unable to allocate an IRQ\n"); +e_destroy_pool: dma_pool_destroy(pt->cmd_q.dma_pool); return ret; From 032062f363b4bf02b1d547f329aa5d97b6a17410 Mon Sep 17 00:00:00 2001 From: Jon Maloy Date: Sun, 13 Feb 2022 20:38:52 -0500 Subject: [PATCH 193/493] tipc: fix wrong publisher node address in link publications When a link comes up we add its presence to the name table to make it possible for users to subscribe for link up/down events. However, after a previous call signature change the binding is wrongly published with the peer node as publishing node, instead of the own node as it should be. This has the effect that the command 'tipc name table show' will list the link binding (service type 2) with node scope and a peer node as originator, something that obviously is impossible. We correct this bug here. Fixes: 50a3499ab853 ("tipc: simplify signature of tipc_namtbl_publish()") Signed-off-by: Jon Maloy Link: https://lore.kernel.org/r/20220214013852.2803940-1-jmaloy@redhat.com Signed-off-by: Jakub Kicinski --- net/tipc/node.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/tipc/node.c b/net/tipc/node.c index 9947b7dfe1d2d0..fd95df338da71f 100644 --- a/net/tipc/node.c +++ b/net/tipc/node.c @@ -413,7 +413,7 @@ static void tipc_node_write_unlock(struct tipc_node *n) tipc_uaddr(&ua, TIPC_SERVICE_RANGE, TIPC_NODE_SCOPE, TIPC_LINK_STATE, n->addr, n->addr); sk.ref = n->link_id; - sk.node = n->addr; + sk.node = tipc_own_addr(net); bearer_id = n->link_id & 0xffff; publ_list = &n->publ_list; From aa7accb7f91c4c2c98bfdde62446d96ecc1ef2c6 Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Fri, 7 Jan 2022 10:40:47 +0800 Subject: [PATCH 194/493] dmaengine: at_xdmac: Fix missing unlock in at_xdmac_tasklet() Add the missing unlock before return from at_xdmac_tasklet(). Fixes: e77e561925df ("dmaengine: at_xdmac: Fix race over irq_status") Reported-by: Hulk Robot Signed-off-by: Yang Yingliang Reviewed-by: Tudor Ambarus Link: https://lore.kernel.org/r/20220107024047.1051915-1-yangyingliang@huawei.com Signed-off-by: Vinod Koul --- drivers/dma/at_xdmac.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c index a1da2b4b6d7323..1476156af74b44 100644 --- a/drivers/dma/at_xdmac.c +++ b/drivers/dma/at_xdmac.c @@ -1681,8 +1681,10 @@ static void at_xdmac_tasklet(struct tasklet_struct *t) __func__, atchan->irq_status); if (!(atchan->irq_status & AT_XDMAC_CIS_LIS) && - !(atchan->irq_status & error_mask)) + !(atchan->irq_status & error_mask)) { + spin_unlock_irq(&atchan->lock); return; + } if (atchan->irq_status & error_mask) at_xdmac_handle_error(atchan); From 2d21543efe332cd8c8f212fb7d365bc8b0690bfa Mon Sep 17 00:00:00 2001 From: Jiasheng Jiang Date: Thu, 6 Jan 2022 11:09:39 +0800 Subject: [PATCH 195/493] dmaengine: sh: rcar-dmac: Check for error num after setting mask Because of the possible failure of the dma_supported(), the dma_set_mask_and_coherent() may return error num. Therefore, it should be better to check it and return the error if fails. Fixes: dc312349e875 ("dmaengine: rcar-dmac: Widen DMA mask to 40 bits") Signed-off-by: Jiasheng Jiang Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20220106030939.2644320-1-jiasheng@iscas.ac.cn Signed-off-by: Vinod Koul --- drivers/dma/sh/rcar-dmac.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar-dmac.c index 481f45c77ce18e..4a34ddd9c1c646 100644 --- a/drivers/dma/sh/rcar-dmac.c +++ b/drivers/dma/sh/rcar-dmac.c @@ -1869,7 +1869,9 @@ static int rcar_dmac_probe(struct platform_device *pdev) dmac->dev = &pdev->dev; platform_set_drvdata(pdev, dmac); dma_set_max_seg_size(dmac->dev, RCAR_DMATCR_MASK); - dma_set_mask_and_coherent(dmac->dev, DMA_BIT_MASK(40)); + ret = dma_set_mask_and_coherent(dmac->dev, DMA_BIT_MASK(40)); + if (ret) + return ret; ret = rcar_dmac_parse_of(&pdev->dev, dmac); if (ret < 0) From e831c7aba950f3ae94002b10321279654525e5ec Mon Sep 17 00:00:00 2001 From: Miaoqian Lin Date: Sat, 8 Jan 2022 08:53:36 +0000 Subject: [PATCH 196/493] dmaengine: stm32-dmamux: Fix PM disable depth imbalance in stm32_dmamux_probe The pm_runtime_enable will increase power disable depth. If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). Fixes: 4f3ceca254e0 ("dmaengine: stm32-dmamux: Add PM Runtime support") Signed-off-by: Miaoqian Lin Reviewed-by: Amelie Delaunay Link: https://lore.kernel.org/r/20220108085336.11992-1-linmq006@gmail.com Signed-off-by: Vinod Koul --- drivers/dma/stm32-dmamux.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/dma/stm32-dmamux.c b/drivers/dma/stm32-dmamux.c index a42164389ebc22..d5d55732adba10 100644 --- a/drivers/dma/stm32-dmamux.c +++ b/drivers/dma/stm32-dmamux.c @@ -292,10 +292,12 @@ static int stm32_dmamux_probe(struct platform_device *pdev) ret = of_dma_router_register(node, stm32_dmamux_route_allocate, &stm32_dmamux->dmarouter); if (ret) - goto err_clk; + goto pm_disable; return 0; +pm_disable: + pm_runtime_disable(&pdev->dev); err_clk: clk_disable_unprepare(stm32_dmamux->clk); From da2ad87fba0891576aadda9161b8505fde81a84d Mon Sep 17 00:00:00 2001 From: Jiasheng Jiang Date: Tue, 11 Jan 2022 09:12:39 +0800 Subject: [PATCH 197/493] dmaengine: sh: rcar-dmac: Check for error num after dma_set_max_seg_size As the possible failure of the dma_set_max_seg_size(), it should be better to check the return value of the dma_set_max_seg_size(). Fixes: 97d49c59e219 ("dmaengine: rcar-dmac: set scatter/gather max segment size") Reported-by: Geert Uytterhoeven Signed-off-by: Jiasheng Jiang Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20220111011239.452837-1-jiasheng@iscas.ac.cn Signed-off-by: Vinod Koul --- drivers/dma/sh/rcar-dmac.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar-dmac.c index 4a34ddd9c1c646..13d12d660cc200 100644 --- a/drivers/dma/sh/rcar-dmac.c +++ b/drivers/dma/sh/rcar-dmac.c @@ -1868,7 +1868,10 @@ static int rcar_dmac_probe(struct platform_device *pdev) dmac->dev = &pdev->dev; platform_set_drvdata(pdev, dmac); - dma_set_max_seg_size(dmac->dev, RCAR_DMATCR_MASK); + ret = dma_set_max_seg_size(dmac->dev, RCAR_DMATCR_MASK); + if (ret) + return ret; + ret = dma_set_mask_and_coherent(dmac->dev, DMA_BIT_MASK(40)); if (ret) return ret; From 455896c53d5b803733ddd84e1bf8a430644439b6 Mon Sep 17 00:00:00 2001 From: Yongzhi Liu Date: Sat, 15 Jan 2022 21:34:56 -0800 Subject: [PATCH 198/493] dmaengine: shdma: Fix runtime PM imbalance on error pm_runtime_get_() increments the runtime PM usage counter even when it returns an error code, thus a matching decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Yongzhi Liu Link: https://lore.kernel.org/r/1642311296-87020-1-git-send-email-lyz_cs@pku.edu.cn Signed-off-by: Vinod Koul --- drivers/dma/sh/shdma-base.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/dma/sh/shdma-base.c b/drivers/dma/sh/shdma-base.c index 158e5e7defaeb0..b26ed690f03c8e 100644 --- a/drivers/dma/sh/shdma-base.c +++ b/drivers/dma/sh/shdma-base.c @@ -115,8 +115,10 @@ static dma_cookie_t shdma_tx_submit(struct dma_async_tx_descriptor *tx) ret = pm_runtime_get(schan->dev); spin_unlock_irq(&schan->chan_lock); - if (ret < 0) + if (ret < 0) { dev_err(schan->dev, "%s(): GET = %d\n", __func__, ret); + pm_runtime_put(schan->dev); + } pm_runtime_barrier(schan->dev); From 0b0dcb3882c8f08bdeafa03adb4487e104d26050 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sat, 12 Feb 2022 20:45:48 +0100 Subject: [PATCH 199/493] i2c: cadence: allow COMPILE_TEST Driver builds fine with COMPILE_TEST. Enable it for wider test coverage and easier maintenance. Signed-off-by: Wolfram Sang Acked-by: Michal Simek --- drivers/i2c/busses/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 42da31c1ab7057..bad2fadc94a3e1 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -488,7 +488,7 @@ config I2C_BRCMSTB config I2C_CADENCE tristate "Cadence I2C Controller" - depends on ARCH_ZYNQ || ARM64 || XTENSA + depends on ARCH_ZYNQ || ARM64 || XTENSA || COMPILE_TEST help Say yes here to select Cadence I2C Host Controller. This controller is e.g. used by Xilinx Zynq. From 2ce4462f2724d1b3cedccea441c6d18bb360629a Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sat, 12 Feb 2022 20:46:57 +0100 Subject: [PATCH 200/493] i2c: imx: allow COMPILE_TEST Driver builds fine with COMPILE_TEST. Enable it for wider test coverage and easier maintenance. Signed-off-by: Wolfram Sang Acked-by: Oleksij Rempel --- drivers/i2c/busses/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index bad2fadc94a3e1..255fd4198433eb 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -680,7 +680,7 @@ config I2C_IMG config I2C_IMX tristate "IMX I2C interface" - depends on ARCH_MXC || ARCH_LAYERSCAPE || COLDFIRE + depends on ARCH_MXC || ARCH_LAYERSCAPE || COLDFIRE || COMPILE_TEST select I2C_SLAVE help Say Y here if you want to use the IIC bus controller on From 5de717974005fcad2502281e9f82e139ca91f4bb Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sat, 12 Feb 2022 20:47:07 +0100 Subject: [PATCH 201/493] i2c: qup: allow COMPILE_TEST Driver builds fine with COMPILE_TEST. Enable it for wider test coverage and easier maintenance. Signed-off-by: Wolfram Sang --- drivers/i2c/busses/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 255fd4198433eb..8a6c6ee28556fe 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -935,7 +935,7 @@ config I2C_QCOM_GENI config I2C_QUP tristate "Qualcomm QUP based I2C controller" - depends on ARCH_QCOM + depends on ARCH_QCOM || COMPILE_TEST help If you say yes to this option, support will be included for the built-in I2C interface on the Qualcomm SoCs. From fe663df7825811358531dc2e8a52d9eaa5e3515e Mon Sep 17 00:00:00 2001 From: Anders Roxell Date: Fri, 11 Feb 2022 01:51:13 +0100 Subject: [PATCH 202/493] powerpc/lib/sstep: fix 'ptesync' build error Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian 2.37.90.20220207) the following build error shows up: {standard input}: Assembler messages: {standard input}:2088: Error: unrecognized opcode: `ptesync' make[3]: *** [/builds/linux/scripts/Makefile.build:287: arch/powerpc/lib/sstep.o] Error 1 Add the 'ifdef CONFIG_PPC64' around the 'ptesync' in function 'emulate_update_regs()' to like it is in 'analyse_instr()'. Since it looks like it got dropped inadvertently by commit 3cdfcbfd32b9 ("powerpc: Change analyse_instr so it doesn't modify *regs"). A key detail is that analyse_instr() will never recognise lwsync or ptesync on 32-bit (because of the existing ifdef), and as a result emulate_update_regs() should never be called with an op specifying either of those on 32-bit. So removing them from emulate_update_regs() should be a nop in terms of runtime behaviour. Fixes: 3cdfcbfd32b9 ("powerpc: Change analyse_instr so it doesn't modify *regs") Cc: stable@vger.kernel.org # v4.14+ Suggested-by: Arnd Bergmann Signed-off-by: Anders Roxell [mpe: Add last paragraph of change log mentioning analyse_instr() details] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220211005113.1361436-1-anders.roxell@linaro.org --- arch/powerpc/lib/sstep.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c index a94b0cd0bdc5ca..bd3734d5be892b 100644 --- a/arch/powerpc/lib/sstep.c +++ b/arch/powerpc/lib/sstep.c @@ -3264,12 +3264,14 @@ void emulate_update_regs(struct pt_regs *regs, struct instruction_op *op) case BARRIER_EIEIO: eieio(); break; +#ifdef CONFIG_PPC64 case BARRIER_LWSYNC: asm volatile("lwsync" : : : "memory"); break; case BARRIER_PTESYNC: asm volatile("ptesync" : : : "memory"); break; +#endif } break; From 038438a25c45d5ac996e95a22fa9e76ff3d1f8c7 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Mon, 14 Feb 2022 17:19:48 +0300 Subject: [PATCH 203/493] usb: dwc3: pci: add support for the Intel Raptor Lake-S This patch adds the necessary PCI ID for Intel Raptor Lake-S devices. Signed-off-by: Heikki Krogerus Link: https://lore.kernel.org/r/20220214141948.18637-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/dwc3-pci.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 7ff8fc8f79a9b5..4e69a9d829f232 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -43,6 +43,7 @@ #define PCI_DEVICE_ID_INTEL_ADLP 0x51ee #define PCI_DEVICE_ID_INTEL_ADLM 0x54ee #define PCI_DEVICE_ID_INTEL_ADLS 0x7ae1 +#define PCI_DEVICE_ID_INTEL_RPLS 0x7a61 #define PCI_DEVICE_ID_INTEL_TGL 0x9a15 #define PCI_DEVICE_ID_AMD_MR 0x163a @@ -409,6 +410,9 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLS), (kernel_ulong_t) &dwc3_pci_intel_swnode, }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_RPLS), + (kernel_ulong_t) &dwc3_pci_intel_swnode, }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGL), (kernel_ulong_t) &dwc3_pci_intel_swnode, }, From d7c93a903f33ff35aa0e6b5a8032eb9755b00826 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 13 Feb 2022 14:05:16 +0100 Subject: [PATCH 204/493] usb: dwc3: pci: Add "snps,dis_u2_susphy_quirk" for Intel Bay Trail Commit e0082698b689 ("usb: dwc3: ulpi: conditionally resume ULPI PHY") fixed an issue where ULPI transfers would timeout if any requests where send to the phy sometime after init, giving it enough time to auto-suspend. Commit e5f4ca3fce90 ("usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression") changed the behavior to instead of clearing the DWC3_GUSB2PHYCFG_SUSPHY bit, add an extra sleep when it is set. But on Bay Trail devices, when phy_set_mode() gets called during init, this leads to errors like these: [ 28.451522] tusb1210 dwc3.ulpi: error -110 writing val 0x01 to reg 0x0a [ 28.464089] tusb1210 dwc3.ulpi: error -110 writing val 0x01 to reg 0x0a Add "snps,dis_u2_susphy_quirk" to the settings for Bay Trail devices to fix this. This restores the old behavior for Bay Trail devices, since previously the DWC3_GUSB2PHYCFG_SUSPHY bit would get cleared on the first ulpi_read/_write() and then was never set again. Fixes: e5f4ca3fce90 ("usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression") Cc: stable@kernel.org Cc: Serge Semin Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20220213130524.18748-2-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/dwc3-pci.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 4e69a9d829f232..18ab49b8e66eb1 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -120,6 +120,13 @@ static const struct property_entry dwc3_pci_intel_properties[] = { {} }; +static const struct property_entry dwc3_pci_intel_byt_properties[] = { + PROPERTY_ENTRY_STRING("dr_mode", "peripheral"), + PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"), + PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"), + {} +}; + static const struct property_entry dwc3_pci_mrfld_properties[] = { PROPERTY_ENTRY_STRING("dr_mode", "otg"), PROPERTY_ENTRY_STRING("linux,extcon-name", "mrfld_bcove_pwrsrc"), @@ -162,6 +169,10 @@ static const struct software_node dwc3_pci_intel_swnode = { .properties = dwc3_pci_intel_properties, }; +static const struct software_node dwc3_pci_intel_byt_swnode = { + .properties = dwc3_pci_intel_byt_properties, +}; + static const struct software_node dwc3_pci_intel_mrfld_swnode = { .properties = dwc3_pci_mrfld_properties, }; @@ -345,7 +356,7 @@ static const struct pci_device_id dwc3_pci_id_table[] = { (kernel_ulong_t) &dwc3_pci_intel_swnode, }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_BYT), - (kernel_ulong_t) &dwc3_pci_intel_swnode, }, + (kernel_ulong_t) &dwc3_pci_intel_byt_swnode, }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MRFLD), (kernel_ulong_t) &dwc3_pci_intel_mrfld_swnode, }, From 8b328f8002bcf29ef517ee4bf234e09aabec4d2e Mon Sep 17 00:00:00 2001 From: Puma Hsu Date: Tue, 15 Feb 2022 14:33:19 +0200 Subject: [PATCH 205/493] xhci: re-initialize the HC during resume if HCE was set When HCE(Host Controller Error) is set, it means an internal error condition has been detected. Software needs to re-initialize the HC, so add this check in xhci resume. Cc: stable@vger.kernel.org Signed-off-by: Puma Hsu Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20220215123320.1253947-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index dc357cabb2654a..04ec2de158bf52 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1091,6 +1091,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) int retval = 0; bool comp_timer_running = false; bool pending_portevent = false; + bool reinit_xhc = false; if (!hcd->state) return 0; @@ -1107,10 +1108,11 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags); spin_lock_irq(&xhci->lock); - if ((xhci->quirks & XHCI_RESET_ON_RESUME) || xhci->broken_suspend) - hibernated = true; - if (!hibernated) { + if (hibernated || xhci->quirks & XHCI_RESET_ON_RESUME || xhci->broken_suspend) + reinit_xhc = true; + + if (!reinit_xhc) { /* * Some controllers might lose power during suspend, so wait * for controller not ready bit to clear, just as in xHC init. @@ -1143,12 +1145,17 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) spin_unlock_irq(&xhci->lock); return -ETIMEDOUT; } - temp = readl(&xhci->op_regs->status); } - /* If restore operation fails, re-initialize the HC during resume */ - if ((temp & STS_SRE) || hibernated) { + temp = readl(&xhci->op_regs->status); + + /* re-initialize the HC on Restore Error, or Host Controller Error */ + if (temp & (STS_SRE | STS_HCE)) { + reinit_xhc = true; + xhci_warn(xhci, "xHC error in resume, USBSTS 0x%x, Reinit\n", temp); + } + if (reinit_xhc) { if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && !(xhci_all_ports_seen_u0(xhci))) { del_timer_sync(&xhci->comp_mode_recovery_timer); From 243a1dd7ba48c120986dd9e66fee74bcb7751034 Mon Sep 17 00:00:00 2001 From: Hongyu Xie Date: Tue, 15 Feb 2022 14:33:20 +0200 Subject: [PATCH 206/493] xhci: Prevent futile URB re-submissions due to incorrect return value. The -ENODEV return value from xhci_check_args() is incorrectly changed to -EINVAL in a couple places before propagated further. xhci_check_args() returns 4 types of value, -ENODEV, -EINVAL, 1 and 0. xhci_urb_enqueue and xhci_check_streams_endpoint return -EINVAL if the return value of xhci_check_args <= 0. This causes problems for example r8152_submit_rx, calling usb_submit_urb in drivers/net/usb/r8152.c. r8152_submit_rx will never get -ENODEV after submiting an urb when xHC is halted because xhci_urb_enqueue returns -EINVAL in the very beginning. [commit message and header edit -Mathias] Fixes: 203a86613fb3 ("xhci: Avoid NULL pointer deref when host dies.") Cc: stable@vger.kernel.org Signed-off-by: Hongyu Xie Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20220215123320.1253947-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 04ec2de158bf52..2d378543bc3aa3 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1611,9 +1611,12 @@ static int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flag struct urb_priv *urb_priv; int num_tds; - if (!urb || xhci_check_args(hcd, urb->dev, urb->ep, - true, true, __func__) <= 0) + if (!urb) return -EINVAL; + ret = xhci_check_args(hcd, urb->dev, urb->ep, + true, true, __func__); + if (ret <= 0) + return ret ? ret : -EINVAL; slot_id = urb->dev->slot_id; ep_index = xhci_get_endpoint_index(&urb->ep->desc); @@ -3330,7 +3333,7 @@ static int xhci_check_streams_endpoint(struct xhci_hcd *xhci, return -EINVAL; ret = xhci_check_args(xhci_to_hcd(xhci), udev, ep, 1, true, __func__); if (ret <= 0) - return -EINVAL; + return ret ? ret : -EINVAL; if (usb_ss_max_streams(&ep->ss_ep_comp) == 0) { xhci_warn(xhci, "WARN: SuperSpeed Endpoint Companion" " descriptor for ep 0x%x does not support streams\n", From 525b108e6d95b643eccbd84fb10aa9aa101b18dd Mon Sep 17 00:00:00 2001 From: DENG Qingfang Date: Wed, 9 Feb 2022 22:39:47 +0800 Subject: [PATCH 207/493] net: phy: mediatek: remove PHY mode check on MT7531 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The function mt7531_phy_mode_supported in the DSA driver set supported mode to PHY_INTERFACE_MODE_GMII instead of PHY_INTERFACE_MODE_INTERNAL for the internal PHY, so this check breaks the PHY initialization: mt7530 mdio-bus:00 wan (uninitialized): failed to connect to PHY: -EINVAL Remove the check to make it work again. Reported-by: Hauke Mehrtens Fixes: e40d2cca0189 ("net: phy: add MediaTek Gigabit Ethernet PHY driver") Signed-off-by: DENG Qingfang Acked-by: Arınç ÜNAL Tested-by: Hauke Mehrtens Signed-off-by: David S. Miller --- drivers/net/phy/mediatek-ge.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/net/phy/mediatek-ge.c b/drivers/net/phy/mediatek-ge.c index b7a5ae20edd537..68ee434f9dea31 100644 --- a/drivers/net/phy/mediatek-ge.c +++ b/drivers/net/phy/mediatek-ge.c @@ -55,9 +55,6 @@ static int mt7530_phy_config_init(struct phy_device *phydev) static int mt7531_phy_config_init(struct phy_device *phydev) { - if (phydev->interface != PHY_INTERFACE_MODE_INTERNAL) - return -EINVAL; - mtk_gephy_config_init(phydev); /* PHY link down power saving enable */ From 25206111512de994dfc914f5b2972a22aa904ef3 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 13 Feb 2022 11:06:07 -0800 Subject: [PATCH 208/493] crypto: af_alg - get rid of alg_memory_allocated alg_memory_allocated does not seem to be really used. alg_proto does have a .memory_allocated field, but no corresponding .sysctl_mem. This means sk_has_account() returns true, but all sk_prot_mem_limits() users will trigger a NULL dereference [1]. THis was not a problem until SO_RESERVE_MEM addition. general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 3591 Comm: syz-executor153 Not tainted 5.17.0-rc3-syzkaller-00316-gb81b1829e7e3 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:sk_prot_mem_limits include/net/sock.h:1523 [inline] RIP: 0010:sock_reserve_memory+0x1d7/0x330 net/core/sock.c:1000 Code: 08 00 74 08 48 89 ef e8 27 20 bb f9 4c 03 7c 24 10 48 8b 6d 00 48 83 c5 08 48 89 e8 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 48 89 ef e8 fb 1f bb f9 48 8b 6d 00 4c 89 ff 48 RSP: 0018:ffffc90001f1fb68 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff88814aabc000 RCX: dffffc0000000000 RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffff90e18120 RBP: 0000000000000008 R08: dffffc0000000000 R09: fffffbfff21c3025 R10: fffffbfff21c3025 R11: 0000000000000000 R12: ffffffff8d109840 R13: 0000000000001002 R14: 0000000000000001 R15: 0000000000000001 FS: 0000555556e08300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc74416f130 CR3: 0000000073d9e000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: sock_setsockopt+0x14a9/0x3a30 net/core/sock.c:1446 __sys_setsockopt+0x5af/0x980 net/socket.c:2176 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0xb1/0xc0 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc7440fddc9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe98f07968 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc7440fddc9 RDX: 0000000000000049 RSI: 0000000000000001 RDI: 0000000000000004 RBP: 0000000000000000 R08: 0000000000000004 R09: 00007ffe98f07990 R10: 0000000020000000 R11: 0000000000000246 R12: 00007ffe98f0798c R13: 00007ffe98f079a0 R14: 00007ffe98f079e0 R15: 0000000000000000 Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:sk_prot_mem_limits include/net/sock.h:1523 [inline] RIP: 0010:sock_reserve_memory+0x1d7/0x330 net/core/sock.c:1000 Code: 08 00 74 08 48 89 ef e8 27 20 bb f9 4c 03 7c 24 10 48 8b 6d 00 48 83 c5 08 48 89 e8 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 48 89 ef e8 fb 1f bb f9 48 8b 6d 00 4c 89 ff 48 RSP: 0018:ffffc90001f1fb68 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff88814aabc000 RCX: dffffc0000000000 RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffff90e18120 RBP: 0000000000000008 R08: dffffc0000000000 R09: fffffbfff21c3025 R10: fffffbfff21c3025 R11: 0000000000000000 R12: ffffffff8d109840 R13: 0000000000001002 R14: 0000000000000001 R15: 0000000000000001 FS: 0000555556e08300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc74416f130 CR3: 0000000073d9e000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Fixes: 2bb2f5fb21b0 ("net: add new socket option SO_RESERVE_MEM") Signed-off-by: Eric Dumazet Cc: Wei Wang Reported-by: syzbot Signed-off-by: David S. Miller --- crypto/af_alg.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/crypto/af_alg.c b/crypto/af_alg.c index e1ea18536a5f08..c8289b7a85baaa 100644 --- a/crypto/af_alg.c +++ b/crypto/af_alg.c @@ -25,12 +25,9 @@ struct alg_type_list { struct list_head list; }; -static atomic_long_t alg_memory_allocated; - static struct proto alg_proto = { .name = "ALG", .owner = THIS_MODULE, - .memory_allocated = &alg_memory_allocated, .obj_size = sizeof(struct alg_sock), }; From 9d2d38c35e7a3de96340c446f3b0fde7b2e7348e Mon Sep 17 00:00:00 2001 From: Zhang Yunkai Date: Mon, 14 Feb 2022 03:27:21 +0000 Subject: [PATCH 209/493] ipv4: add description about martian source When multiple containers are running in the environment and multiple macvlan network port are configured in each container, a lot of martian source prints will appear after martian_log is enabled. they are almost the same, and printed by net_warn_ratelimited. Each arp message will trigger this print on each network port. Such as: IPv4: martian source 173.254.95.16 from 173.254.100.109, on dev eth0 ll header: 00000000: ff ff ff ff ff ff 40 00 ad fe 64 6d 08 06 ......@...dm.. IPv4: martian source 173.254.95.16 from 173.254.100.109, on dev eth1 ll header: 00000000: ff ff ff ff ff ff 40 00 ad fe 64 6d 08 06 ......@...dm.. There is no description of this kind of source in the RFC1812. Signed-off-by: Zhang Yunkai Signed-off-by: David S. Miller --- net/ipv4/fib_frontend.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c index 4d61ddd8a0ecfc..85117b45216d40 100644 --- a/net/ipv4/fib_frontend.c +++ b/net/ipv4/fib_frontend.c @@ -436,6 +436,9 @@ int fib_validate_source(struct sk_buff *skb, __be32 src, __be32 dst, if (net->ipv4.fib_has_custom_local_routes || fib4_has_custom_rules(net)) goto full_check; + /* Within the same container, it is regarded as a martian source, + * and the same host but different containers are not. + */ if (inet_lookup_ifaddr_rcu(net, src)) return -EINVAL; From 2a36ed7c1cd55742503bed81d2cc0ea83bd0ad0c Mon Sep 17 00:00:00 2001 From: Tom Rix Date: Mon, 14 Feb 2022 07:41:39 -0800 Subject: [PATCH 210/493] dpaa2-switch: fix default return of dpaa2_switch_flower_parse_mirror_key Clang static analysis reports this representative problem dpaa2-switch-flower.c:616:24: warning: The right operand of '==' is a garbage value tmp->cfg.vlan_id == vlan) { ^ ~~~~ vlan is set in dpaa2_switch_flower_parse_mirror_key(). However this function can return success without setting vlan. So change the default return to -EOPNOTSUPP. Fixes: 0f3faece5808 ("dpaa2-switch: add VLAN based mirroring") Signed-off-by: Tom Rix Reviewed-by: Ioana Ciornei Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-flower.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-flower.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-flower.c index d6eefbbf163fa1..cacd454ac696c9 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-flower.c +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-flower.c @@ -532,6 +532,7 @@ static int dpaa2_switch_flower_parse_mirror_key(struct flow_cls_offload *cls, struct flow_rule *rule = flow_cls_offload_flow_rule(cls); struct flow_dissector *dissector = rule->match.dissector; struct netlink_ext_ack *extack = cls->common.extack; + int ret = -EOPNOTSUPP; if (dissector->used_keys & ~(BIT(FLOW_DISSECTOR_KEY_BASIC) | @@ -561,9 +562,10 @@ static int dpaa2_switch_flower_parse_mirror_key(struct flow_cls_offload *cls, } *vlan = (u16)match.key->vlan_id; + ret = 0; } - return 0; + return ret; } static int From 07dd44852be89386ab12210df90a2d78779f3bff Mon Sep 17 00:00:00 2001 From: Radu Bulie Date: Mon, 14 Feb 2022 19:45:34 +0200 Subject: [PATCH 211/493] dpaa2-eth: Initialize mutex used in one step timestamping path 1588 Single Step Timestamping code path uses a mutex to enforce atomicity for two events: - update of ptp single step register - transmit ptp event packet Before this patch the mutex was not initialized. This caused unexpected crashes in the Tx function. Fixes: c55211892f463 ("dpaa2-eth: support PTP Sync packet one-step timestamping") Signed-off-by: Radu Bulie Reviewed-by: Ioana Ciornei Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c index dd9385d15f6bdf..0f90d2d5bb609b 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c @@ -4338,7 +4338,7 @@ static int dpaa2_eth_probe(struct fsl_mc_device *dpni_dev) } INIT_WORK(&priv->tx_onestep_tstamp, dpaa2_eth_tx_onestep_tstamp); - + mutex_init(&priv->onestep_tstamp_lock); skb_queue_head_init(&priv->tx_skbs); priv->rx_copybreak = DPAA2_ETH_DEFAULT_COPYBREAK; From 9ceaf6f76b203682bb6100e14b3d7da4c0bedde8 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 14 Feb 2022 11:15:53 -0800 Subject: [PATCH 212/493] bonding: fix data-races around agg_select_timer syzbot reported that two threads might write over agg_select_timer at the same time. Make agg_select_timer atomic to fix the races. BUG: KCSAN: data-race in bond_3ad_initiate_agg_selection / bond_3ad_state_machine_handler read to 0xffff8881242aea90 of 4 bytes by task 1846 on cpu 1: bond_3ad_state_machine_handler+0x99/0x2810 drivers/net/bonding/bond_3ad.c:2317 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x1bf/0x1e0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 write to 0xffff8881242aea90 of 4 bytes by task 25910 on cpu 0: bond_3ad_initiate_agg_selection+0x18/0x30 drivers/net/bonding/bond_3ad.c:1998 bond_open+0x658/0x6f0 drivers/net/bonding/bond_main.c:3967 __dev_open+0x274/0x3a0 net/core/dev.c:1407 dev_open+0x54/0x190 net/core/dev.c:1443 bond_enslave+0xcef/0x3000 drivers/net/bonding/bond_main.c:1937 do_set_master net/core/rtnetlink.c:2532 [inline] do_setlink+0x94f/0x2500 net/core/rtnetlink.c:2736 __rtnl_newlink net/core/rtnetlink.c:3414 [inline] rtnl_newlink+0xfeb/0x13e0 net/core/rtnetlink.c:3529 rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5594 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmsg+0x195/0x230 net/socket.c:2496 __do_sys_sendmsg net/socket.c:2505 [inline] __se_sys_sendmsg net/socket.c:2503 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2503 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000050 -> 0x0000004f Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 25910 Comm: syz-executor.1 Tainted: G W 5.17.0-rc4-syzkaller-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet Reported-by: syzbot Cc: Jay Vosburgh Cc: Veaceslav Falico Signed-off-by: David S. Miller --- drivers/net/bonding/bond_3ad.c | 30 +++++++++++++++++++++++++----- include/net/bond_3ad.h | 2 +- 2 files changed, 26 insertions(+), 6 deletions(-) diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index 9fd1d6cba3cdaa..a86b1f71762ea4 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -225,7 +225,7 @@ static inline int __check_agg_selection_timer(struct port *port) if (bond == NULL) return 0; - return BOND_AD_INFO(bond).agg_select_timer ? 1 : 0; + return atomic_read(&BOND_AD_INFO(bond).agg_select_timer) ? 1 : 0; } /** @@ -1995,7 +1995,7 @@ static void ad_marker_response_received(struct bond_marker *marker, */ void bond_3ad_initiate_agg_selection(struct bonding *bond, int timeout) { - BOND_AD_INFO(bond).agg_select_timer = timeout; + atomic_set(&BOND_AD_INFO(bond).agg_select_timer, timeout); } /** @@ -2278,6 +2278,28 @@ void bond_3ad_update_ad_actor_settings(struct bonding *bond) spin_unlock_bh(&bond->mode_lock); } +/** + * bond_agg_timer_advance - advance agg_select_timer + * @bond: bonding structure + * + * Return true when agg_select_timer reaches 0. + */ +static bool bond_agg_timer_advance(struct bonding *bond) +{ + int val, nval; + + while (1) { + val = atomic_read(&BOND_AD_INFO(bond).agg_select_timer); + if (!val) + return false; + nval = val - 1; + if (atomic_cmpxchg(&BOND_AD_INFO(bond).agg_select_timer, + val, nval) == val) + break; + } + return nval == 0; +} + /** * bond_3ad_state_machine_handler - handle state machines timeout * @work: work context to fetch bonding struct to work on from @@ -2313,9 +2335,7 @@ void bond_3ad_state_machine_handler(struct work_struct *work) if (!bond_has_slaves(bond)) goto re_arm; - /* check if agg_select_timer timer after initialize is timed out */ - if (BOND_AD_INFO(bond).agg_select_timer && - !(--BOND_AD_INFO(bond).agg_select_timer)) { + if (bond_agg_timer_advance(bond)) { slave = bond_first_slave_rcu(bond); port = slave ? &(SLAVE_AD_INFO(slave)->port) : NULL; diff --git a/include/net/bond_3ad.h b/include/net/bond_3ad.h index 38785d48baff99..184105d682942c 100644 --- a/include/net/bond_3ad.h +++ b/include/net/bond_3ad.h @@ -262,7 +262,7 @@ struct ad_system { struct ad_bond_info { struct ad_system system; /* 802.3ad system structure */ struct bond_3ad_stats stats; - u32 agg_select_timer; /* Timer to select aggregator after all adapter's hand shakes */ + atomic_t agg_select_timer; /* Timer to select aggregator after all adapter's hand shakes */ u16 aggregator_identifier; }; From ef57640575406f57f5b3393cf57f457b0ace837e Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Tue, 15 Feb 2022 01:42:00 +0200 Subject: [PATCH 213/493] net: mscc: ocelot: fix use-after-free in ocelot_vlan_del() ocelot_vlan_member_del() will free the struct ocelot_bridge_vlan, so if this is the same as the port's pvid_vlan which we access afterwards, what we're accessing is freed memory. Fix the bug by determining whether to clear ocelot_port->pvid_vlan prior to calling ocelot_vlan_member_del(). Fixes: d4004422f6f9 ("net: mscc: ocelot: track the port pvid using a pointer") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/ethernet/mscc/ocelot.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c index e6de86552df0ee..fd3ceb74620d5d 100644 --- a/drivers/net/ethernet/mscc/ocelot.c +++ b/drivers/net/ethernet/mscc/ocelot.c @@ -549,14 +549,18 @@ EXPORT_SYMBOL(ocelot_vlan_add); int ocelot_vlan_del(struct ocelot *ocelot, int port, u16 vid) { struct ocelot_port *ocelot_port = ocelot->ports[port]; + bool del_pvid = false; int err; + if (ocelot_port->pvid_vlan && ocelot_port->pvid_vlan->vid == vid) + del_pvid = true; + err = ocelot_vlan_member_del(ocelot, port, vid); if (err) return err; /* Ingress */ - if (ocelot_port->pvid_vlan && ocelot_port->pvid_vlan->vid == vid) + if (del_pvid) ocelot_port_set_pvid(ocelot, port, NULL); /* Egress */ From f240762f88b4b1b58561939ffd44837759756477 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 14 Feb 2022 20:10:03 -0800 Subject: [PATCH 214/493] io_uring: add a schedule point in io_add_buffers() Looping ~65535 times doing kmalloc() calls can trigger soft lockups, especially with DEBUG features (like KASAN). [ 253.536212] watchdog: BUG: soft lockup - CPU#64 stuck for 26s! [b219417889:12575] [ 253.544433] Modules linked in: vfat fat i2c_mux_pca954x i2c_mux spidev cdc_acm xhci_pci xhci_hcd sha3_generic gq(O) [ 253.544451] CPU: 64 PID: 12575 Comm: b219417889 Tainted: G S O 5.17.0-smp-DEV #801 [ 253.544457] RIP: 0010:kernel_text_address (./include/asm-generic/sections.h:192 ./include/linux/kallsyms.h:29 kernel/extable.c:67 kernel/extable.c:98) [ 253.544464] Code: 0f 93 c0 48 c7 c1 e0 63 d7 a4 48 39 cb 0f 92 c1 20 c1 0f b6 c1 5b 5d c3 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 53 48 89 fb <48> c7 c0 00 00 80 a0 41 be 01 00 00 00 48 39 c7 72 0c 48 c7 c0 40 [ 253.544468] RSP: 0018:ffff8882d8baf4c0 EFLAGS: 00000246 [ 253.544471] RAX: 1ffff1105b175e00 RBX: ffffffffa13ef09a RCX: 00000000a13ef001 [ 253.544474] RDX: ffffffffa13ef09a RSI: ffff8882d8baf558 RDI: ffffffffa13ef09a [ 253.544476] RBP: ffff8882d8baf4d8 R08: ffff8882d8baf5e0 R09: 0000000000000004 [ 253.544479] R10: ffff8882d8baf5e8 R11: ffffffffa0d59a50 R12: ffff8882eab20380 [ 253.544481] R13: ffffffffa0d59a50 R14: dffffc0000000000 R15: 1ffff1105b175eb0 [ 253.544483] FS: 00000000016d3380(0000) GS:ffff88af48c00000(0000) knlGS:0000000000000000 [ 253.544486] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 253.544488] CR2: 00000000004af0f0 CR3: 00000002eabfa004 CR4: 00000000003706e0 [ 253.544491] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 253.544492] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 253.544494] Call Trace: [ 253.544496] [ 253.544498] ? io_queue_sqe (fs/io_uring.c:7143) [ 253.544505] __kernel_text_address (kernel/extable.c:78) [ 253.544508] unwind_get_return_address (arch/x86/kernel/unwind_frame.c:19) [ 253.544514] arch_stack_walk (arch/x86/kernel/stacktrace.c:27) [ 253.544517] ? io_queue_sqe (fs/io_uring.c:7143) [ 253.544521] stack_trace_save (kernel/stacktrace.c:123) [ 253.544527] ____kasan_kmalloc (mm/kasan/common.c:39 mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:515) [ 253.544531] ? ____kasan_kmalloc (mm/kasan/common.c:39 mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:515) [ 253.544533] ? __kasan_kmalloc (mm/kasan/common.c:524) [ 253.544535] ? kmem_cache_alloc_trace (./include/linux/kasan.h:270 mm/slab.c:3567) [ 253.544541] ? io_issue_sqe (fs/io_uring.c:4556 fs/io_uring.c:4589 fs/io_uring.c:6828) [ 253.544544] ? __io_queue_sqe (fs/io_uring.c:?) [ 253.544551] __kasan_kmalloc (mm/kasan/common.c:524) [ 253.544553] kmem_cache_alloc_trace (./include/linux/kasan.h:270 mm/slab.c:3567) [ 253.544556] ? io_issue_sqe (fs/io_uring.c:4556 fs/io_uring.c:4589 fs/io_uring.c:6828) [ 253.544560] io_issue_sqe (fs/io_uring.c:4556 fs/io_uring.c:4589 fs/io_uring.c:6828) [ 253.544564] ? __kasan_slab_alloc (mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469) [ 253.544567] ? __kasan_slab_alloc (mm/kasan/common.c:39 mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469) [ 253.544569] ? kmem_cache_alloc_bulk (mm/slab.h:732 mm/slab.c:3546) [ 253.544573] ? __io_alloc_req_refill (fs/io_uring.c:2078) [ 253.544578] ? io_submit_sqes (fs/io_uring.c:7441) [ 253.544581] ? __se_sys_io_uring_enter (fs/io_uring.c:10154 fs/io_uring.c:10096) [ 253.544584] ? __x64_sys_io_uring_enter (fs/io_uring.c:10096) [ 253.544587] ? do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) [ 253.544590] ? entry_SYSCALL_64_after_hwframe (??:?) [ 253.544596] __io_queue_sqe (fs/io_uring.c:?) [ 253.544600] io_queue_sqe (fs/io_uring.c:7143) [ 253.544603] io_submit_sqe (fs/io_uring.c:?) [ 253.544608] io_submit_sqes (fs/io_uring.c:?) [ 253.544612] __se_sys_io_uring_enter (fs/io_uring.c:10154 fs/io_uring.c:10096) [ 253.544616] __x64_sys_io_uring_enter (fs/io_uring.c:10096) [ 253.544619] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) [ 253.544623] entry_SYSCALL_64_after_hwframe (??:?) Fixes: ddf0322db79c ("io_uring: add IORING_OP_PROVIDE_BUFFERS") Signed-off-by: Eric Dumazet Cc: Jens Axboe Cc: Pavel Begunkov Cc: io-uring Reported-by: syzbot Link: https://lore.kernel.org/r/20220215041003.2394784-1-eric.dumazet@gmail.com Signed-off-by: Jens Axboe --- fs/io_uring.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/io_uring.c b/fs/io_uring.c index 77b9c7e4793bf3..b928928617a475 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -4567,6 +4567,7 @@ static int io_add_buffers(struct io_provide_buf *pbuf, struct io_buffer **head) } else { list_add_tail(&buf->list, &(*head)->list); } + cond_resched(); } return i ? i : -ENOMEM; From 7e5b6a5c8c44310784c88c1c198dde79f6402f7b Mon Sep 17 00:00:00 2001 From: Tom Rix Date: Mon, 14 Feb 2022 18:05:41 -0800 Subject: [PATCH 215/493] mctp: fix use after free Clang static analysis reports this problem route.c:425:4: warning: Use of memory after it is freed trace_mctp_key_acquire(key); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ When mctp_key_add() fails, key is freed but then is later used in trace_mctp_key_acquire(). Add an else statement to use the key only when mctp_key_add() is successful. Fixes: 4f9e1ba6de45 ("mctp: Add tracepoints for tag/key handling") Signed-off-by: Tom Rix Signed-off-by: David S. Miller --- net/mctp/route.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/net/mctp/route.c b/net/mctp/route.c index 8d9f4ff3e285cd..e52cef75050026 100644 --- a/net/mctp/route.c +++ b/net/mctp/route.c @@ -412,13 +412,14 @@ static int mctp_route_input(struct mctp_route *route, struct sk_buff *skb) * this function. */ rc = mctp_key_add(key, msk); - if (rc) + if (rc) { kfree(key); + } else { + trace_mctp_key_acquire(key); - trace_mctp_key_acquire(key); - - /* we don't need to release key->lock on exit */ - mctp_key_unref(key); + /* we don't need to release key->lock on exit */ + mctp_key_unref(key); + } key = NULL; } else { From f8efca92ae509c25e0a4bd5d0a86decea4f0c41e Mon Sep 17 00:00:00 2001 From: Eliav Farber Date: Thu, 13 Jan 2022 10:06:19 +0000 Subject: [PATCH 216/493] EDAC: Fix calculation of returned address and next offset in edac_align_ptr() Do alignment logic properly and use the "ptr" local variable for calculating the remainder of the alignment. This became an issue because struct edac_mc_layer has a size that is not zero modulo eight, and the next offset that was prepared for the private data was unaligned, causing an alignment exception. The patch in Fixes: which broke this actually wanted to "what we actually care about is the alignment of the actual pointer that's about to be returned." But it didn't check that alignment. Use the correct variable "ptr" for that. [ bp: Massage commit message. ] Fixes: 8447c4d15e35 ("edac: Do alignment logic properly in edac_align_ptr()") Signed-off-by: Eliav Farber Signed-off-by: Borislav Petkov Cc: Link: https://lore.kernel.org/r/20220113100622.12783-2-farbere@amazon.com --- drivers/edac/edac_mc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c index 9d9aabdec96b78..f5677d81bd2d56 100644 --- a/drivers/edac/edac_mc.c +++ b/drivers/edac/edac_mc.c @@ -215,7 +215,7 @@ void *edac_align_ptr(void **p, unsigned int size, int n_elems) else return (char *)ptr; - r = (unsigned long)p % align; + r = (unsigned long)ptr % align; if (r == 0) return (char *)ptr; From 8d2b1a1ec9f559d30b724877da4ce592edc41fdc Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 15 Feb 2022 11:35:47 +0100 Subject: [PATCH 217/493] CDC-NCM: avoid overflow in sanity checking A broken device may give an extreme offset like 0xFFF0 and a reasonable length for a fragment. In the sanity check as formulated now, this will create an integer overflow, defeating the sanity check. Both offset and offset + len need to be checked in such a manner that no overflow can occur. And those quantities should be unsigned. Signed-off-by: Oliver Neukum Reviewed-by: Greg Kroah-Hartman Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ncm.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index e303b522efb50a..15f91d691bba35 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -1715,10 +1715,10 @@ int cdc_ncm_rx_fixup(struct usbnet *dev, struct sk_buff *skb_in) { struct sk_buff *skb; struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; - int len; + unsigned int len; int nframes; int x; - int offset; + unsigned int offset; union { struct usb_cdc_ncm_ndp16 *ndp16; struct usb_cdc_ncm_ndp32 *ndp32; @@ -1790,8 +1790,8 @@ int cdc_ncm_rx_fixup(struct usbnet *dev, struct sk_buff *skb_in) break; } - /* sanity checking */ - if (((offset + len) > skb_in->len) || + /* sanity checking - watch out for integer wrap*/ + if ((offset > skb_in->len) || (len > skb_in->len - offset) || (len > ctx->rx_max) || (len < ETH_HLEN)) { netif_dbg(dev, rx_err, dev->net, "invalid frame detected (ignored) offset[%u]=%u, length=%u, skb=%p\n", From b6821b0d9b56386d2bf14806f90ec401468c799f Mon Sep 17 00:00:00 2001 From: Oliver Graute Date: Thu, 10 Feb 2022 09:53:22 +0100 Subject: [PATCH 218/493] staging: fbtft: fb_st7789v: reset display before initialization In rare cases the display is flipped or mirrored. This was observed more often in a low temperature environment. A clean reset on init_display() should help to get registers in a sane state. Fixes: ef8f317795da (staging: fbtft: use init function instead of init sequence) Cc: stable@vger.kernel.org Signed-off-by: Oliver Graute Link: https://lore.kernel.org/r/20220210085322.15676-1-oliver.graute@kococonnector.com Signed-off-by: Greg Kroah-Hartman --- drivers/staging/fbtft/fb_st7789v.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/staging/fbtft/fb_st7789v.c b/drivers/staging/fbtft/fb_st7789v.c index abe9395a0aefda..861a154144e661 100644 --- a/drivers/staging/fbtft/fb_st7789v.c +++ b/drivers/staging/fbtft/fb_st7789v.c @@ -144,6 +144,8 @@ static int init_display(struct fbtft_par *par) { int rc; + par->fbtftops.reset(par); + rc = init_tearing_effect_line(par); if (rc) return rc; From 6f66db29e2415cbe8759c48584f9cae19b3c2651 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 14 Dec 2021 19:49:13 +0200 Subject: [PATCH 219/493] pinctrl: tigerlake: Revert "Add Alder Lake-M ACPI ID" It appears that last minute change moved ACPI ID of Alder Lake-M to the INTC1055, which is already in the driver. This ID on the other hand will be used elsewhere. This reverts commit 258435a1c8187f559549e515d2f77fa0b57bcd27. Signed-off-by: Andy Shevchenko --- drivers/pinctrl/intel/pinctrl-tigerlake.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/pinctrl/intel/pinctrl-tigerlake.c b/drivers/pinctrl/intel/pinctrl-tigerlake.c index 0bcd19597e4ada..3ddaeffc04150a 100644 --- a/drivers/pinctrl/intel/pinctrl-tigerlake.c +++ b/drivers/pinctrl/intel/pinctrl-tigerlake.c @@ -749,7 +749,6 @@ static const struct acpi_device_id tgl_pinctrl_acpi_match[] = { { "INT34C5", (kernel_ulong_t)&tgllp_soc_data }, { "INT34C6", (kernel_ulong_t)&tglh_soc_data }, { "INTC1055", (kernel_ulong_t)&tgllp_soc_data }, - { "INTC1057", (kernel_ulong_t)&tgllp_soc_data }, { } }; MODULE_DEVICE_TABLE(acpi, tgl_pinctrl_acpi_match); From 61d06f01f9710b327a53492e5add9f972eb909b3 Mon Sep 17 00:00:00 2001 From: Felix Maurer Date: Fri, 11 Feb 2022 18:43:36 +0100 Subject: [PATCH 220/493] selftests: bpf: Check bpf_msg_push_data return value bpf_msg_push_data may return a non-zero value to indicate an error. The return value should be checked to prevent undetected errors. To indicate an error, the BPF programs now perform a different action than their intended one to make the userspace test program notice the error, i.e., the programs supposed to pass/redirect drop, the program supposed to drop passes. Fixes: 84fbfe026acaa ("bpf: test_sockmap add options to use msg_push_data") Signed-off-by: Felix Maurer Signed-off-by: Alexei Starovoitov Acked-by: John Fastabend Link: https://lore.kernel.org/bpf/89f767bb44005d6b4dd1f42038c438f76b3ebfad.1644601294.git.fmaurer@redhat.com --- .../selftests/bpf/progs/test_sockmap_kern.h | 26 +++++++++++++------ 1 file changed, 18 insertions(+), 8 deletions(-) diff --git a/tools/testing/selftests/bpf/progs/test_sockmap_kern.h b/tools/testing/selftests/bpf/progs/test_sockmap_kern.h index 2966564b8497aa..6c85b00f27b2e5 100644 --- a/tools/testing/selftests/bpf/progs/test_sockmap_kern.h +++ b/tools/testing/selftests/bpf/progs/test_sockmap_kern.h @@ -235,7 +235,7 @@ SEC("sk_msg1") int bpf_prog4(struct sk_msg_md *msg) { int *bytes, zero = 0, one = 1, two = 2, three = 3, four = 4, five = 5; - int *start, *end, *start_push, *end_push, *start_pop, *pop; + int *start, *end, *start_push, *end_push, *start_pop, *pop, err = 0; bytes = bpf_map_lookup_elem(&sock_apply_bytes, &zero); if (bytes) @@ -249,8 +249,11 @@ int bpf_prog4(struct sk_msg_md *msg) bpf_msg_pull_data(msg, *start, *end, 0); start_push = bpf_map_lookup_elem(&sock_bytes, &two); end_push = bpf_map_lookup_elem(&sock_bytes, &three); - if (start_push && end_push) - bpf_msg_push_data(msg, *start_push, *end_push, 0); + if (start_push && end_push) { + err = bpf_msg_push_data(msg, *start_push, *end_push, 0); + if (err) + return SK_DROP; + } start_pop = bpf_map_lookup_elem(&sock_bytes, &four); pop = bpf_map_lookup_elem(&sock_bytes, &five); if (start_pop && pop) @@ -263,6 +266,7 @@ int bpf_prog6(struct sk_msg_md *msg) { int zero = 0, one = 1, two = 2, three = 3, four = 4, five = 5, key = 0; int *bytes, *start, *end, *start_push, *end_push, *start_pop, *pop, *f; + int err = 0; __u64 flags = 0; bytes = bpf_map_lookup_elem(&sock_apply_bytes, &zero); @@ -279,8 +283,11 @@ int bpf_prog6(struct sk_msg_md *msg) start_push = bpf_map_lookup_elem(&sock_bytes, &two); end_push = bpf_map_lookup_elem(&sock_bytes, &three); - if (start_push && end_push) - bpf_msg_push_data(msg, *start_push, *end_push, 0); + if (start_push && end_push) { + err = bpf_msg_push_data(msg, *start_push, *end_push, 0); + if (err) + return SK_DROP; + } start_pop = bpf_map_lookup_elem(&sock_bytes, &four); pop = bpf_map_lookup_elem(&sock_bytes, &five); @@ -338,7 +345,7 @@ SEC("sk_msg5") int bpf_prog10(struct sk_msg_md *msg) { int *bytes, *start, *end, *start_push, *end_push, *start_pop, *pop; - int zero = 0, one = 1, two = 2, three = 3, four = 4, five = 5; + int zero = 0, one = 1, two = 2, three = 3, four = 4, five = 5, err = 0; bytes = bpf_map_lookup_elem(&sock_apply_bytes, &zero); if (bytes) @@ -352,8 +359,11 @@ int bpf_prog10(struct sk_msg_md *msg) bpf_msg_pull_data(msg, *start, *end, 0); start_push = bpf_map_lookup_elem(&sock_bytes, &two); end_push = bpf_map_lookup_elem(&sock_bytes, &three); - if (start_push && end_push) - bpf_msg_push_data(msg, *start_push, *end_push, 0); + if (start_push && end_push) { + err = bpf_msg_push_data(msg, *start_push, *end_push, 0); + if (err) + return SK_PASS; + } start_pop = bpf_map_lookup_elem(&sock_bytes, &four); pop = bpf_map_lookup_elem(&sock_bytes, &five); if (start_pop && pop) From 741b23a970a79d5d3a1db2d64fa2c7b375a4febb Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?D=C4=81vis=20Mos=C4=81ns?= Date: Wed, 2 Feb 2022 23:44:55 +0200 Subject: [PATCH 221/493] btrfs: prevent copying too big compressed lzo segment MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Compressed length can be corrupted to be a lot larger than memory we have allocated for buffer. This will cause memcpy in copy_compressed_segment to write outside of allocated memory. This mostly results in stuck read syscall but sometimes when using btrfs send can get #GP kernel: general protection fault, probably for non-canonical address 0x841551d5c1000: 0000 [#1] PREEMPT SMP NOPTI kernel: CPU: 17 PID: 264 Comm: kworker/u256:7 Tainted: P OE 5.17.0-rc2-1 #12 kernel: Workqueue: btrfs-endio btrfs_work_helper [btrfs] kernel: RIP: 0010:lzo_decompress_bio (./include/linux/fortify-string.h:225 fs/btrfs/lzo.c:322 fs/btrfs/lzo.c:394) btrfs Code starting with the faulting instruction =========================================== 0:* 48 8b 06 mov (%rsi),%rax <-- trapping instruction 3: 48 8d 79 08 lea 0x8(%rcx),%rdi 7: 48 83 e7 f8 and $0xfffffffffffffff8,%rdi b: 48 89 01 mov %rax,(%rcx) e: 44 89 f0 mov %r14d,%eax 11: 48 8b 54 06 f8 mov -0x8(%rsi,%rax,1),%rdx kernel: RSP: 0018:ffffb110812efd50 EFLAGS: 00010212 kernel: RAX: 0000000000001000 RBX: 000000009ca264c8 RCX: ffff98996e6d8ff8 kernel: RDX: 0000000000000064 RSI: 000841551d5c1000 RDI: ffffffff9500435d kernel: RBP: ffff989a3be856c0 R08: 0000000000000000 R09: 0000000000000000 kernel: R10: 0000000000000000 R11: 0000000000001000 R12: ffff98996e6d8000 kernel: R13: 0000000000000008 R14: 0000000000001000 R15: 000841551d5c1000 kernel: FS: 0000000000000000(0000) GS:ffff98a09d640000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 00001e9f984d9ea8 CR3: 000000014971a000 CR4: 00000000003506e0 kernel: Call Trace: kernel: kernel: end_compressed_bio_read (fs/btrfs/compression.c:104 fs/btrfs/compression.c:1363 fs/btrfs/compression.c:323) btrfs kernel: end_workqueue_fn (fs/btrfs/disk-io.c:1923) btrfs kernel: btrfs_work_helper (fs/btrfs/async-thread.c:326) btrfs kernel: process_one_work (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:212 ./include/trace/events/workqueue.h:108 kernel/workqueue.c:2312) kernel: worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2455) kernel: ? process_one_work (kernel/workqueue.c:2397) kernel: kthread (kernel/kthread.c:377) kernel: ? kthread_complete_and_exit (kernel/kthread.c:332) kernel: ret_from_fork (arch/x86/entry/entry_64.S:301) kernel: CC: stable@vger.kernel.org # 4.9+ Signed-off-by: Dāvis Mosāns Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/lzo.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/fs/btrfs/lzo.c b/fs/btrfs/lzo.c index 0fb90cbe76697c..e6e28a9c798773 100644 --- a/fs/btrfs/lzo.c +++ b/fs/btrfs/lzo.c @@ -380,6 +380,17 @@ int lzo_decompress_bio(struct list_head *ws, struct compressed_bio *cb) kunmap(cur_page); cur_in += LZO_LEN; + if (seg_len > lzo1x_worst_compress(PAGE_SIZE)) { + /* + * seg_len shouldn't be larger than we have allocated + * for workspace->cbuf + */ + btrfs_err(fs_info, "unexpectedly large lzo segment len %u", + seg_len); + ret = -EIO; + goto out; + } + /* Copy the compressed segment payload into workspace */ copy_compressed_segment(cb, workspace->cbuf, seg_len, &cur_in); From 966d879bafaaf020c11a7cee9526f6dd823a4126 Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Fri, 11 Feb 2022 14:41:39 +0800 Subject: [PATCH 222/493] btrfs: defrag: allow defrag_one_cluster() to skip large extent which is not a target In the rework of btrfs_defrag_file(), we always call defrag_one_cluster() and increase the offset by cluster size, which is only 256K. But there are cases where we have a large extent (e.g. 128M) which doesn't need to be defragged at all. Before the refactor, we can directly skip the range, but now we have to scan that extent map again and again until the cluster moves after the non-target extent. Fix the problem by allow defrag_one_cluster() to increase btrfs_defrag_ctrl::last_scanned to the end of an extent, if and only if the last extent of the cluster is not a target. The test script looks like this: mkfs.btrfs -f $dev > /dev/null mount $dev $mnt # As btrfs ioctl uses 32M as extent_threshold xfs_io -f -c "pwrite 0 64M" $mnt/file1 sync # Some fragemented range to defrag xfs_io -s -c "pwrite 65548k 4k" \ -c "pwrite 65544k 4k" \ -c "pwrite 65540k 4k" \ -c "pwrite 65536k 4k" \ $mnt/file1 sync echo "=== before ===" xfs_io -c "fiemap -v" $mnt/file1 echo "=== after ===" btrfs fi defrag $mnt/file1 sync xfs_io -c "fiemap -v" $mnt/file1 umount $mnt With extra ftrace put into defrag_one_cluster(), before the patch it would result tons of loops: (As defrag_one_cluster() is inlined, the function name is its caller) btrfs-126062 [005] ..... 4682.816026: btrfs_defrag_file: r/i=5/257 start=0 len=262144 btrfs-126062 [005] ..... 4682.816027: btrfs_defrag_file: r/i=5/257 start=262144 len=262144 btrfs-126062 [005] ..... 4682.816028: btrfs_defrag_file: r/i=5/257 start=524288 len=262144 btrfs-126062 [005] ..... 4682.816028: btrfs_defrag_file: r/i=5/257 start=786432 len=262144 btrfs-126062 [005] ..... 4682.816028: btrfs_defrag_file: r/i=5/257 start=1048576 len=262144 ... btrfs-126062 [005] ..... 4682.816043: btrfs_defrag_file: r/i=5/257 start=67108864 len=262144 But with this patch there will be just one loop, then directly to the end of the extent: btrfs-130471 [014] ..... 5434.029558: defrag_one_cluster: r/i=5/257 start=0 len=262144 btrfs-130471 [014] ..... 5434.029559: defrag_one_cluster: r/i=5/257 start=67108864 len=16384 CC: stable@vger.kernel.org # 5.16 Signed-off-by: Qu Wenruo Reviewed-by: Filipe Manana Signed-off-by: David Sterba --- fs/btrfs/ioctl.c | 48 +++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 39 insertions(+), 9 deletions(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 90136562d8654e..218724e4edd684 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1186,8 +1186,10 @@ struct defrag_target_range { static int defrag_collect_targets(struct btrfs_inode *inode, u64 start, u64 len, u32 extent_thresh, u64 newer_than, bool do_compress, - bool locked, struct list_head *target_list) + bool locked, struct list_head *target_list, + u64 *last_scanned_ret) { + bool last_is_target = false; u64 cur = start; int ret = 0; @@ -1197,6 +1199,7 @@ static int defrag_collect_targets(struct btrfs_inode *inode, bool next_mergeable = true; u64 range_len; + last_is_target = false; em = defrag_lookup_extent(&inode->vfs_inode, cur, locked); if (!em) break; @@ -1272,6 +1275,7 @@ static int defrag_collect_targets(struct btrfs_inode *inode, } add: + last_is_target = true; range_len = min(extent_map_end(em), start + len) - cur; /* * This one is a good target, check if it can be merged into @@ -1315,6 +1319,17 @@ static int defrag_collect_targets(struct btrfs_inode *inode, kfree(entry); } } + if (!ret && last_scanned_ret) { + /* + * If the last extent is not a target, the caller can skip to + * the end of that extent. + * Otherwise, we can only go the end of the specified range. + */ + if (!last_is_target) + *last_scanned_ret = max(cur, *last_scanned_ret); + else + *last_scanned_ret = max(start + len, *last_scanned_ret); + } return ret; } @@ -1373,7 +1388,8 @@ static int defrag_one_locked_target(struct btrfs_inode *inode, } static int defrag_one_range(struct btrfs_inode *inode, u64 start, u32 len, - u32 extent_thresh, u64 newer_than, bool do_compress) + u32 extent_thresh, u64 newer_than, bool do_compress, + u64 *last_scanned_ret) { struct extent_state *cached_state = NULL; struct defrag_target_range *entry; @@ -1419,7 +1435,7 @@ static int defrag_one_range(struct btrfs_inode *inode, u64 start, u32 len, */ ret = defrag_collect_targets(inode, start, len, extent_thresh, newer_than, do_compress, true, - &target_list); + &target_list, last_scanned_ret); if (ret < 0) goto unlock_extent; @@ -1454,7 +1470,8 @@ static int defrag_one_cluster(struct btrfs_inode *inode, u64 start, u32 len, u32 extent_thresh, u64 newer_than, bool do_compress, unsigned long *sectors_defragged, - unsigned long max_sectors) + unsigned long max_sectors, + u64 *last_scanned_ret) { const u32 sectorsize = inode->root->fs_info->sectorsize; struct defrag_target_range *entry; @@ -1465,7 +1482,7 @@ static int defrag_one_cluster(struct btrfs_inode *inode, BUILD_BUG_ON(!IS_ALIGNED(CLUSTER_SIZE, PAGE_SIZE)); ret = defrag_collect_targets(inode, start, len, extent_thresh, newer_than, do_compress, false, - &target_list); + &target_list, NULL); if (ret < 0) goto out; @@ -1482,6 +1499,15 @@ static int defrag_one_cluster(struct btrfs_inode *inode, range_len = min_t(u32, range_len, (max_sectors - *sectors_defragged) * sectorsize); + /* + * If defrag_one_range() has updated last_scanned_ret, + * our range may already be invalid (e.g. hole punched). + * Skip if our range is before last_scanned_ret, as there is + * no need to defrag the range anymore. + */ + if (entry->start + range_len <= *last_scanned_ret) + continue; + if (ra) page_cache_sync_readahead(inode->vfs_inode.i_mapping, ra, NULL, entry->start >> PAGE_SHIFT, @@ -1494,7 +1520,8 @@ static int defrag_one_cluster(struct btrfs_inode *inode, * accounting. */ ret = defrag_one_range(inode, entry->start, range_len, - extent_thresh, newer_than, do_compress); + extent_thresh, newer_than, do_compress, + last_scanned_ret); if (ret < 0) break; *sectors_defragged += range_len >> @@ -1505,6 +1532,8 @@ static int defrag_one_cluster(struct btrfs_inode *inode, list_del_init(&entry->list); kfree(entry); } + if (ret >= 0) + *last_scanned_ret = max(*last_scanned_ret, start + len); return ret; } @@ -1590,6 +1619,7 @@ int btrfs_defrag_file(struct inode *inode, struct file_ra_state *ra, while (cur < last_byte) { const unsigned long prev_sectors_defragged = sectors_defragged; + u64 last_scanned = cur; u64 cluster_end; /* The cluster size 256K should always be page aligned */ @@ -1619,8 +1649,8 @@ int btrfs_defrag_file(struct inode *inode, struct file_ra_state *ra, BTRFS_I(inode)->defrag_compress = compress_type; ret = defrag_one_cluster(BTRFS_I(inode), ra, cur, cluster_end + 1 - cur, extent_thresh, - newer_than, do_compress, - §ors_defragged, max_to_defrag); + newer_than, do_compress, §ors_defragged, + max_to_defrag, &last_scanned); if (sectors_defragged > prev_sectors_defragged) balance_dirty_pages_ratelimited(inode->i_mapping); @@ -1628,7 +1658,7 @@ int btrfs_defrag_file(struct inode *inode, struct file_ra_state *ra, btrfs_inode_unlock(inode, 0); if (ret < 0) break; - cur = cluster_end + 1; + cur = max(cluster_end + 1, last_scanned); if (ret > 0) { ret = 0; break; From f98da1d66298882b1d2061051ea14ddc15c58884 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 15 Feb 2022 10:54:23 -0800 Subject: [PATCH 223/493] ACPI: tables: Quiet ACPI table not found warning Paul reports that the ACPI core complains on every boot about a missing CEDT table. Unlike the standard NUMA tables (SRAT, MADT, and SLIT) that are critical to NUMA init, CEDT is only expected on CXL platforms. Given the notice is not actionable lower its severity to debug. Link: https://lore.kernel.org/r/55f5c077-061c-7e53-b02d-53dde1dd654f@molgen.mpg.de Fixes: fd49f99c1809 ("ACPI: NUMA: Add a node and memblk for each CFMWS not in SRAT") Reported-by: Paul Menzel Signed-off-by: Dan Williams Signed-off-by: Rafael J. Wysocki --- drivers/acpi/tables.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c index 0741a4933f6222..34600b5b9d8e65 100644 --- a/drivers/acpi/tables.c +++ b/drivers/acpi/tables.c @@ -400,7 +400,7 @@ int __init_or_acpilib acpi_table_parse_entries_array( acpi_get_table(id, instance, &table_header); if (!table_header) { - pr_warn("%4.4s not present\n", id); + pr_debug("%4.4s not present\n", id); return -ENODEV; } From de8aa31ac7c23af98fe24d1c1b43b065027d6af5 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 15 Feb 2022 16:29:08 -0800 Subject: [PATCH 224/493] Input: zinitix - add new compatible strings This driver works just fine with the BT404 version of the touchscreen as well. Tested on the Samsung GT-I8160 (Codina) mobile phone. Add all the new variants from the binding document so people can easily test them, we believe most of them work more or less. Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20220214234033.1052681-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/zinitix.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/input/touchscreen/zinitix.c b/drivers/input/touchscreen/zinitix.c index 7c82c4f5fa6b33..129ebc810de87c 100644 --- a/drivers/input/touchscreen/zinitix.c +++ b/drivers/input/touchscreen/zinitix.c @@ -571,8 +571,20 @@ static SIMPLE_DEV_PM_OPS(zinitix_pm_ops, zinitix_suspend, zinitix_resume); #ifdef CONFIG_OF static const struct of_device_id zinitix_of_match[] = { + { .compatible = "zinitix,bt402" }, + { .compatible = "zinitix,bt403" }, + { .compatible = "zinitix,bt404" }, + { .compatible = "zinitix,bt412" }, + { .compatible = "zinitix,bt413" }, + { .compatible = "zinitix,bt431" }, + { .compatible = "zinitix,bt432" }, + { .compatible = "zinitix,bt531" }, { .compatible = "zinitix,bt532" }, + { .compatible = "zinitix,bt538" }, { .compatible = "zinitix,bt541" }, + { .compatible = "zinitix,bt548" }, + { .compatible = "zinitix,bt554" }, + { .compatible = "zinitix,at100" }, { } }; MODULE_DEVICE_TABLE(of, zinitix_of_match); From 439cf34c8e0a8a33d8c15a31be1b7423426bc765 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Wed, 9 Feb 2022 11:19:27 +0200 Subject: [PATCH 225/493] drm/atomic: Don't pollute crtc_state->mode_blob with error pointers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Make sure we don't assign an error pointer to crtc_state->mode_blob as that will break all kinds of places that assume either NULL or a valid pointer (eg. drm_property_blob_put()). Cc: stable@vger.kernel.org Reported-by: fuyufan Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20220209091928.14766-1-ville.syrjala@linux.intel.com Acked-by: Maxime Ripard --- drivers/gpu/drm/drm_atomic_uapi.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c index 9781722519c3b1..54d62fdb4ef9fb 100644 --- a/drivers/gpu/drm/drm_atomic_uapi.c +++ b/drivers/gpu/drm/drm_atomic_uapi.c @@ -76,15 +76,17 @@ int drm_atomic_set_mode_for_crtc(struct drm_crtc_state *state, state->mode_blob = NULL; if (mode) { + struct drm_property_blob *blob; + drm_mode_convert_to_umode(&umode, mode); - state->mode_blob = - drm_property_create_blob(state->crtc->dev, - sizeof(umode), - &umode); - if (IS_ERR(state->mode_blob)) - return PTR_ERR(state->mode_blob); + blob = drm_property_create_blob(crtc->dev, + sizeof(umode), &umode); + if (IS_ERR(blob)) + return PTR_ERR(blob); drm_mode_copy(&state->mode, mode); + + state->mode_blob = blob; state->enable = true; drm_dbg_atomic(crtc->dev, "Set [MODE:%s] for [CRTC:%d:%s] state %p\n", From 7920af5c826cb4a7ada1ae26fdd317642805adc2 Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Sat, 12 Feb 2022 14:50:48 -0600 Subject: [PATCH 226/493] gpio: rockchip: Reset int_bothedge when changing trigger With v2 hardware, an IRQ can be configured to trigger on both edges via a bit in the int_bothedge register. Currently, the driver sets this bit when changing the trigger type to IRQ_TYPE_EDGE_BOTH, but fails to reset this bit if the trigger type is later changed to something else. This causes spurious IRQs, and when using gpio-keys with wakeup-event-action set to EV_ACT_(DE)ASSERTED, those IRQs translate into spurious wakeups. Fixes: 3bcbd1a85b68 ("gpio/rockchip: support next version gpio controller") Reported-by: Guillaume Savaton Tested-by: Guillaume Savaton Signed-off-by: Samuel Holland Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-rockchip.c | 56 +++++++++++++++++++----------------- 1 file changed, 29 insertions(+), 27 deletions(-) diff --git a/drivers/gpio/gpio-rockchip.c b/drivers/gpio/gpio-rockchip.c index a4c4e4584f5b8c..099e358d249155 100644 --- a/drivers/gpio/gpio-rockchip.c +++ b/drivers/gpio/gpio-rockchip.c @@ -410,10 +410,8 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type) level = rockchip_gpio_readl(bank, bank->gpio_regs->int_type); polarity = rockchip_gpio_readl(bank, bank->gpio_regs->int_polarity); - switch (type) { - case IRQ_TYPE_EDGE_BOTH: + if (type == IRQ_TYPE_EDGE_BOTH) { if (bank->gpio_type == GPIO_TYPE_V2) { - bank->toggle_edge_mode &= ~mask; rockchip_gpio_writel_bit(bank, d->hwirq, 1, bank->gpio_regs->int_bothedge); goto out; @@ -431,30 +429,34 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type) else polarity |= mask; } - break; - case IRQ_TYPE_EDGE_RISING: - bank->toggle_edge_mode &= ~mask; - level |= mask; - polarity |= mask; - break; - case IRQ_TYPE_EDGE_FALLING: - bank->toggle_edge_mode &= ~mask; - level |= mask; - polarity &= ~mask; - break; - case IRQ_TYPE_LEVEL_HIGH: - bank->toggle_edge_mode &= ~mask; - level &= ~mask; - polarity |= mask; - break; - case IRQ_TYPE_LEVEL_LOW: - bank->toggle_edge_mode &= ~mask; - level &= ~mask; - polarity &= ~mask; - break; - default: - ret = -EINVAL; - goto out; + } else { + if (bank->gpio_type == GPIO_TYPE_V2) { + rockchip_gpio_writel_bit(bank, d->hwirq, 0, + bank->gpio_regs->int_bothedge); + } else { + bank->toggle_edge_mode &= ~mask; + } + switch (type) { + case IRQ_TYPE_EDGE_RISING: + level |= mask; + polarity |= mask; + break; + case IRQ_TYPE_EDGE_FALLING: + level |= mask; + polarity &= ~mask; + break; + case IRQ_TYPE_LEVEL_HIGH: + level &= ~mask; + polarity |= mask; + break; + case IRQ_TYPE_LEVEL_LOW: + level &= ~mask; + polarity &= ~mask; + break; + default: + ret = -EINVAL; + goto out; + } } rockchip_gpio_writel(bank, level, bank->gpio_regs->int_type); From 184b58fa816fb5ee1854daf0d430766422bf2a77 Mon Sep 17 00:00:00 2001 From: Mikko Perttunen Date: Mon, 7 Feb 2022 15:19:31 +0200 Subject: [PATCH 227/493] gpu: host1x: Always return syncpoint value when waiting The new TegraDRM UAPI uses syncpoint waiting with timeout set to zero to indicate reading the syncpoint value. To support that we need to return the syncpoint value always when waiting. Fixes: 44e961381354 ("drm/tegra: Implement syncpoint wait UAPI") Signed-off-by: Mikko Perttunen Signed-off-by: Thierry Reding --- drivers/gpu/host1x/syncpt.c | 19 ++----------------- 1 file changed, 2 insertions(+), 17 deletions(-) diff --git a/drivers/gpu/host1x/syncpt.c b/drivers/gpu/host1x/syncpt.c index 83a16e46146b78..f87a8705f51834 100644 --- a/drivers/gpu/host1x/syncpt.c +++ b/drivers/gpu/host1x/syncpt.c @@ -234,27 +234,12 @@ int host1x_syncpt_wait(struct host1x_syncpt *sp, u32 thresh, long timeout, void *ref; struct host1x_waitlist *waiter; int err = 0, check_count = 0; - u32 val; if (value) - *value = 0; - - /* first check cache */ - if (host1x_syncpt_is_expired(sp, thresh)) { - if (value) - *value = host1x_syncpt_load(sp); + *value = host1x_syncpt_load(sp); + if (host1x_syncpt_is_expired(sp, thresh)) return 0; - } - - /* try to read from register */ - val = host1x_hw_syncpt_load(sp->host, sp); - if (host1x_syncpt_is_expired(sp, thresh)) { - if (value) - *value = val; - - goto done; - } if (!timeout) { err = -EAGAIN; From de9f498d2b381de1abf654ca3459c4f01227b5cd Mon Sep 17 00:00:00 2001 From: Changbin Du Date: Tue, 8 Feb 2022 22:07:25 +0800 Subject: [PATCH 228/493] perf trace: Avoid early exit due SIGCHLD from non-workload processes The function trace__symbols_init() runs "perf-read-vdso32" and that ends up with a SIGCHLD delivered to 'perf'. And this SIGCHLD make perf exit early. 'perf trace' should exit only if the SIGCHLD is from our workload process. So let's use sigaction() instead of signal() to match such condition. Committer notes: Use memset to zero the 'struct sigaction' variable as the '= { 0 }' method isn't accepted in many compiler versions, e.g.: 4 34.02 alpine:3.6 : FAIL clang version 4.0.0 (tags/RELEASE_400/final) builtin-trace.c:4897:35: error: suggest braces around initialization of subobject [-Werror,-Wmissing-braces] struct sigaction sigchld_act = { 0 }; ^ {} builtin-trace.c:4897:37: error: missing field 'sa_mask' initializer [-Werror,-Wmissing-field-initializers] struct sigaction sigchld_act = { 0 }; ^ 2 errors generated. 6 32.60 alpine:3.8 : FAIL gcc version 6.4.0 (Alpine 6.4.0) builtin-trace.c:4897:35: error: suggest braces around initialization of subobject [-Werror,-Wmissing-braces] struct sigaction sigchld_act = { 0 }; ^ {} builtin-trace.c:4897:37: error: missing field 'sa_mask' initializer [-Werror,-Wmissing-field-initializers] struct sigaction sigchld_act = { 0 }; ^ 2 errors generated. 7 34.82 alpine:3.9 : FAIL gcc version 8.3.0 (Alpine 8.3.0) builtin-trace.c:4897:35: error: suggest braces around initialization of subobject [-Werror,-Wmissing-braces] struct sigaction sigchld_act = { 0 }; ^ {} builtin-trace.c:4897:37: error: missing field 'sa_mask' initializer [-Werror,-Wmissing-field-initializers] struct sigaction sigchld_act = { 0 }; ^ 2 errors generated. Signed-off-by: Changbin Du Acked-by: Jiri Olsa Cc: Alexander Shishkin Cc: Ingo Molnar Cc: Jiri Olsa Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Link: https://lore.kernel.org/r/20220208140725.3947-1-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-trace.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c index 32844d8a0ea525..52b137a184a66a 100644 --- a/tools/perf/builtin-trace.c +++ b/tools/perf/builtin-trace.c @@ -1536,13 +1536,20 @@ static size_t trace__fprintf_tstamp(struct trace *trace, u64 tstamp, FILE *fp) return fprintf(fp, " ? "); } +static pid_t workload_pid = -1; static bool done = false; static bool interrupted = false; -static void sig_handler(int sig) +static void sighandler_interrupt(int sig __maybe_unused) { - done = true; - interrupted = sig == SIGINT; + done = interrupted = true; +} + +static void sighandler_chld(int sig __maybe_unused, siginfo_t *info, + void *context __maybe_unused) +{ + if (info->si_pid == workload_pid) + done = true; } static size_t trace__fprintf_comm_tid(struct trace *trace, struct thread *thread, FILE *fp) @@ -3938,7 +3945,6 @@ static int trace__run(struct trace *trace, int argc, const char **argv) bool draining = false; trace->live = true; - signal(SIGCHLD, sig_handler); if (!trace->raw_augmented_syscalls) { if (trace->trace_syscalls && trace__add_syscall_newtp(trace)) @@ -4018,6 +4024,7 @@ static int trace__run(struct trace *trace, int argc, const char **argv) fprintf(trace->output, "Couldn't run the workload!\n"); goto out_delete_evlist; } + workload_pid = evlist->workload.pid; } err = evlist__open(evlist); @@ -4887,10 +4894,16 @@ int cmd_trace(int argc, const char **argv) const char * const trace_subcommands[] = { "record", NULL }; int err = -1; char bf[BUFSIZ]; + struct sigaction sigchld_act; signal(SIGSEGV, sighandler_dump_stack); signal(SIGFPE, sighandler_dump_stack); - signal(SIGINT, sig_handler); + signal(SIGINT, sighandler_interrupt); + + memset(&sigchld_act, 0, sizeof(sigchld_act)); + sigchld_act.sa_flags = SA_SIGINFO; + sigchld_act.sa_sigaction = sighandler_chld; + sigaction(SIGCHLD, &sigchld_act, NULL); trace.evlist = evlist__new(); trace.sctbl = syscalltbl__new(); From 714b8b7131f9287b1ff6c0528accd5df585b30d3 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 21 May 2021 16:00:31 -0300 Subject: [PATCH 229/493] tools headers UAPI: Sync linux/perf_event.h with the kernel sources To pick the trivial change in: ddecd22878601a60 ("perf: uapi: Document perf_event_attr::sig_data truncation on 32 bit architectures") Just adds a comment. This silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h' diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h Cc: Marco Elver Cc: Peter Zijlstra Link: https://lore.kernel.org/lkml/ Signed-off-by: Arnaldo Carvalho de Melo --- tools/include/uapi/linux/perf_event.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/include/uapi/linux/perf_event.h b/tools/include/uapi/linux/perf_event.h index 1b65042ab1db8d..82858b697c05a1 100644 --- a/tools/include/uapi/linux/perf_event.h +++ b/tools/include/uapi/linux/perf_event.h @@ -465,6 +465,8 @@ struct perf_event_attr { /* * User provided data if sigtrap=1, passed back to user via * siginfo_t::si_perf_data, e.g. to permit user to identify the event. + * Note, siginfo_t::si_perf_data is long-sized, and sig_data will be + * truncated accordingly on 32 bit architectures. */ __u64 sig_data; }; From 096972f5588dbac741f7f0cc057c84d895d4d80f Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 1 Feb 2022 15:39:03 -0600 Subject: [PATCH 230/493] libperf: Fix 32-bit build for tests uint64_t printf MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit a7f3713f6bf207e6 ("libperf tests: Add test_stat_multiplexing test") added printf's of 64-bit ints using %lu which doesn't work on 32-bit builds: tests/test-evlist.c:529:29: error: format ‘%lu’ expects argument of type \ ‘long unsigned int’, but argument 4 has type ‘uint64_t’ {aka ‘long long unsigned int’} [-Werror=format=] Use PRIu64 instead which works on both 32-bit and 64-bit systems. Fixes: a7f3713f6bf207e6 ("libperf tests: Add test_stat_multiplexing test") Signed-off-by: Rob Herring Cc: Alexander Shishkin Cc: Ingo Molnar Cc: Jiri Olsa Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Shunsuke Nakamura Link: https://lore.kernel.org/r/20220201213903.699656-1-robh@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/lib/perf/tests/test-evlist.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/tools/lib/perf/tests/test-evlist.c b/tools/lib/perf/tests/test-evlist.c index b3479dfa9a1cf0..fa854c83b7e7b8 100644 --- a/tools/lib/perf/tests/test-evlist.c +++ b/tools/lib/perf/tests/test-evlist.c @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #define _GNU_SOURCE // needed for sched.h to get sched_[gs]etaffinity and CPU_(ZERO,SET) +#include #include #include #include @@ -526,12 +527,12 @@ static int test_stat_multiplexing(void) min = counts[0].val; for (i = 0; i < EVENT_NUM; i++) { - __T_VERBOSE("Event %2d -- Raw count = %lu, run = %lu, enable = %lu\n", + __T_VERBOSE("Event %2d -- Raw count = %" PRIu64 ", run = %" PRIu64 ", enable = %" PRIu64 "\n", i, counts[i].val, counts[i].run, counts[i].ena); perf_counts_values__scale(&counts[i], true, &scaled); if (scaled == 1) { - __T_VERBOSE("\t Scaled count = %lu (%.2lf%%, %lu/%lu)\n", + __T_VERBOSE("\t Scaled count = %" PRIu64 " (%.2lf%%, %" PRIu64 "/%" PRIu64 ")\n", counts[i].val, (double)counts[i].run / (double)counts[i].ena * 100.0, counts[i].run, counts[i].ena); From 0b31ea6613ad1e6b9b84d877c1be18e39934e90a Mon Sep 17 00:00:00 2001 From: James Clark Date: Thu, 10 Feb 2022 20:06:19 +0000 Subject: [PATCH 231/493] perf cs-etm: No-op refactor of synth opt usage sample_branches and sample_instructions are already saved in the synth_opts struct. Other usages like synth_opts.last_branch don't save a value, so make this more consistent by always going through synth_opts and not saving duplicate values. Reviewed-by: Leo Yan Signed-off-by: James Clark Cc: Alexander Shishkin Cc: Jiri Olsa Cc: John Garry Cc: Mark Rutland Cc: Mathieu Poirier Cc: Mike Leach Cc: Namhyung Kim Cc: Will Deacon Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220210200620.1227232-1-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/cs-etm.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c index 4f672f7d008c53..796a065a500ed3 100644 --- a/tools/perf/util/cs-etm.c +++ b/tools/perf/util/cs-etm.c @@ -50,8 +50,6 @@ struct cs_etm_auxtrace { u8 timeless_decoding; u8 snapshot_mode; u8 data_queued; - u8 sample_branches; - u8 sample_instructions; int num_cpu; u64 latest_kernel_timestamp; @@ -410,8 +408,8 @@ static void cs_etm__packet_swap(struct cs_etm_auxtrace *etm, { struct cs_etm_packet *tmp; - if (etm->sample_branches || etm->synth_opts.last_branch || - etm->sample_instructions) { + if (etm->synth_opts.branches || etm->synth_opts.last_branch || + etm->synth_opts.instructions) { /* * Swap PACKET with PREV_PACKET: PACKET becomes PREV_PACKET for * the next incoming packet. @@ -1365,7 +1363,6 @@ static int cs_etm__synth_events(struct cs_etm_auxtrace *etm, err = cs_etm__synth_event(session, &attr, id); if (err) return err; - etm->sample_branches = true; etm->branches_sample_type = attr.sample_type; etm->branches_id = id; id += 1; @@ -1389,7 +1386,6 @@ static int cs_etm__synth_events(struct cs_etm_auxtrace *etm, err = cs_etm__synth_event(session, &attr, id); if (err) return err; - etm->sample_instructions = true; etm->instructions_sample_type = attr.sample_type; etm->instructions_id = id; id += 1; @@ -1420,7 +1416,7 @@ static int cs_etm__sample(struct cs_etm_queue *etmq, tidq->prev_packet->last_instr_taken_branch) cs_etm__update_last_branch_rb(etmq, tidq); - if (etm->sample_instructions && + if (etm->synth_opts.instructions && tidq->period_instructions >= etm->instructions_sample_period) { /* * Emit instruction sample periodically @@ -1503,7 +1499,7 @@ static int cs_etm__sample(struct cs_etm_queue *etmq, } } - if (etm->sample_branches) { + if (etm->synth_opts.branches) { bool generate_sample = false; /* Generate sample for tracing on packet */ @@ -1582,7 +1578,7 @@ static int cs_etm__flush(struct cs_etm_queue *etmq, } - if (etm->sample_branches && + if (etm->synth_opts.branches && tidq->prev_packet->sample_type == CS_ETM_RANGE) { err = cs_etm__synth_branch_sample(etmq, tidq); if (err) From 9de0736973dd7f0f710d0f5e0a3dfd9fa9ffeb3f Mon Sep 17 00:00:00 2001 From: James Clark Date: Thu, 10 Feb 2022 20:06:20 +0000 Subject: [PATCH 232/493] perf cs-etm: Fix corrupt inject files when only last branch option is enabled 'perf inject' with Coresight data generates files that cannot be opened when only the last branch option is specified: perf inject -i perf.data --itrace=l -o inject.data perf script -i inject.data 0x33faa8 [0x8]: failed to process type: 9 [Bad address] This is because cs_etm__synth_instruction_sample() is called even when the sample type for instructions hasn't been setup. Last branch records are attached to instruction samples so it doesn't make sense to generate them when --itrace=i isn't specified anyway. This change disables all calls of cs_etm__synth_instruction_sample() unless --itrace=i is specified, resulting in a file with no samples if only --itrace=l is provided, rather than a bad file. Reviewed-by: Leo Yan Signed-off-by: James Clark Cc: Alexander Shishkin Cc: Jiri Olsa Cc: John Garry Cc: Mark Rutland Cc: Mathieu Poirier Cc: Mike Leach Cc: Namhyung Kim Cc: Will Deacon Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220210200620.1227232-2-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/cs-etm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c index 796a065a500ed3..8b95fb3c4d7b40 100644 --- a/tools/perf/util/cs-etm.c +++ b/tools/perf/util/cs-etm.c @@ -1553,6 +1553,7 @@ static int cs_etm__flush(struct cs_etm_queue *etmq, goto swap_packet; if (etmq->etm->synth_opts.last_branch && + etmq->etm->synth_opts.instructions && tidq->prev_packet->sample_type == CS_ETM_RANGE) { u64 addr; @@ -1610,6 +1611,7 @@ static int cs_etm__end_block(struct cs_etm_queue *etmq, * the trace. */ if (etmq->etm->synth_opts.last_branch && + etmq->etm->synth_opts.instructions && tidq->prev_packet->sample_type == CS_ETM_RANGE) { u64 addr; From 30d1c4d947983f3cfbff9cbb7a4d69b05b699678 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Tue, 15 Feb 2022 16:37:13 +0100 Subject: [PATCH 233/493] libperf: Fix perf_cpu_map__for_each_cpu macro Tzvetomir Stoyanov reported an issue with using macro perf_cpu_map__for_each_cpu using private perf_cpu object. The issue is caused by recent change that wrapped cpu in struct perf_cpu to distinguish it from cpu indexes. We need to make struct perf_cpu public. Add a simple test for using the perf_cpu_map__for_each_cpu macro. Fixes: 6d18804b963b78dc ("perf cpumap: Give CPUs their own type") Reported-by: Tzvetomir Stoyanov (VMware) Signed-off-by: Jiri Olsa Cc: Alexander Shishkin Cc: Ian Rogers Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lore.kernel.org/lkml/20220215153713.31395-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/lib/perf/include/internal/cpumap.h | 6 +----- tools/lib/perf/include/perf/cpumap.h | 5 +++++ tools/lib/perf/libperf.map | 1 + tools/lib/perf/tests/test-cpumap.c | 11 +++++++++++ 4 files changed, 18 insertions(+), 5 deletions(-) diff --git a/tools/lib/perf/include/internal/cpumap.h b/tools/lib/perf/include/internal/cpumap.h index 581f9ffb4237ca..1973a18c096b07 100644 --- a/tools/lib/perf/include/internal/cpumap.h +++ b/tools/lib/perf/include/internal/cpumap.h @@ -3,11 +3,7 @@ #define __LIBPERF_INTERNAL_CPUMAP_H #include - -/** A wrapper around a CPU to avoid confusion with the perf_cpu_map's map's indices. */ -struct perf_cpu { - int cpu; -}; +#include /** * A sized, reference counted, sorted array of integers representing CPU diff --git a/tools/lib/perf/include/perf/cpumap.h b/tools/lib/perf/include/perf/cpumap.h index 15b8faafd6154e..4a2edbdb5e2be9 100644 --- a/tools/lib/perf/include/perf/cpumap.h +++ b/tools/lib/perf/include/perf/cpumap.h @@ -7,6 +7,11 @@ #include #include +/** A wrapper around a CPU to avoid confusion with the perf_cpu_map's map's indices. */ +struct perf_cpu { + int cpu; +}; + LIBPERF_API struct perf_cpu_map *perf_cpu_map__dummy_new(void); LIBPERF_API struct perf_cpu_map *perf_cpu_map__default_new(void); LIBPERF_API struct perf_cpu_map *perf_cpu_map__new(const char *cpu_list); diff --git a/tools/lib/perf/libperf.map b/tools/lib/perf/libperf.map index 93696affda2e27..6fa0d651576b69 100644 --- a/tools/lib/perf/libperf.map +++ b/tools/lib/perf/libperf.map @@ -2,6 +2,7 @@ LIBPERF_0.0.1 { global: libperf_init; perf_cpu_map__dummy_new; + perf_cpu_map__default_new; perf_cpu_map__get; perf_cpu_map__put; perf_cpu_map__new; diff --git a/tools/lib/perf/tests/test-cpumap.c b/tools/lib/perf/tests/test-cpumap.c index d39378eaf8972b..87b0510a556ff3 100644 --- a/tools/lib/perf/tests/test-cpumap.c +++ b/tools/lib/perf/tests/test-cpumap.c @@ -14,6 +14,8 @@ static int libperf_print(enum libperf_print_level level, int test_cpumap(int argc, char **argv) { struct perf_cpu_map *cpus; + struct perf_cpu cpu; + int idx; __T_START; @@ -27,6 +29,15 @@ int test_cpumap(int argc, char **argv) perf_cpu_map__put(cpus); perf_cpu_map__put(cpus); + cpus = perf_cpu_map__default_new(); + if (!cpus) + return -1; + + perf_cpu_map__for_each_cpu(cpu, idx, cpus) + __T("wrong cpu number", cpu.cpu != -1); + + perf_cpu_map__put(cpus); + __T_END; return tests_failed == 0 ? 0 : -1; } From 52a9dab6d892763b2a8334a568bd4e2c1a6fde66 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Sun, 13 Feb 2022 10:24:43 -0800 Subject: [PATCH 234/493] libsubcmd: Fix use-after-free for realloc(..., 0) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit GCC 12 correctly reports a potential use-after-free condition in the xrealloc helper. Fix the warning by avoiding an implicit "free(ptr)" when size == 0: In file included from help.c:12: In function 'xrealloc', inlined from 'add_cmdname' at help.c:24:2: subcmd-util.h:56:23: error: pointer may be used after 'realloc' [-Werror=use-after-free] 56 | ret = realloc(ptr, size); | ^~~~~~~~~~~~~~~~~~ subcmd-util.h:52:21: note: call to 'realloc' here 52 | void *ret = realloc(ptr, size); | ^~~~~~~~~~~~~~~~~~ subcmd-util.h:58:31: error: pointer may be used after 'realloc' [-Werror=use-after-free] 58 | ret = realloc(ptr, 1); | ^~~~~~~~~~~~~~~ subcmd-util.h:52:21: note: call to 'realloc' here 52 | void *ret = realloc(ptr, size); | ^~~~~~~~~~~~~~~~~~ Fixes: 2f4ce5ec1d447beb ("perf tools: Finalize subcmd independence") Reported-by: Valdis Klētnieks Signed-off-by: Kees Kook Tested-by: Valdis Klētnieks Tested-by: Justin M. Forbes Acked-by: Josh Poimboeuf Cc: linux-hardening@vger.kernel.org Cc: Valdis Klētnieks Link: http://lore.kernel.org/lkml/20220213182443.4037039-1-keescook@chromium.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/lib/subcmd/subcmd-util.h | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/tools/lib/subcmd/subcmd-util.h b/tools/lib/subcmd/subcmd-util.h index 794a375dad3601..b2aec04fce8f67 100644 --- a/tools/lib/subcmd/subcmd-util.h +++ b/tools/lib/subcmd/subcmd-util.h @@ -50,15 +50,8 @@ static NORETURN inline void die(const char *err, ...) static inline void *xrealloc(void *ptr, size_t size) { void *ret = realloc(ptr, size); - if (!ret && !size) - ret = realloc(ptr, 1); - if (!ret) { - ret = realloc(ptr, size); - if (!ret && !size) - ret = realloc(ptr, 1); - if (!ret) - die("Out of memory, realloc failed"); - } + if (!ret) + die("Out of memory, realloc failed"); return ret; } From 047e6032c4f054372311eb20c759cfe0b3ca7ffe Mon Sep 17 00:00:00 2001 From: German Gomez Date: Tue, 25 Jan 2022 10:44:34 +0000 Subject: [PATCH 235/493] perf test: Fix arm64 perf_event_attr tests wrt --call-graph initialization The struct perf_event_attr is initialised differently in Arm64 when recording in call-graph fp mode, so update the relevant tests, and add two extra arm64-only tests. Before: $ perf test 17 -v 17: Setup struct perf_event_attr [...] running './tests/attr/test-record-graph-default' expected sample_type=295, got 4391 expected sample_regs_user=0, got 1073741824 FAILED './tests/attr/test-record-graph-default' - match failure test child finished with -1 ---- end ---- After: [...] running './tests/attr/test-record-graph-default-aarch64' test limitation 'aarch64' running './tests/attr/test-record-graph-fp-aarch64' test limitation 'aarch64' running './tests/attr/test-record-graph-default' test limitation '!aarch64' excluded architecture list ['aarch64'] skipped [aarch64] './tests/attr/test-record-graph-default' running './tests/attr/test-record-graph-fp' test limitation '!aarch64' excluded architecture list ['aarch64'] skipped [aarch64] './tests/attr/test-record-graph-fp' [...] Fixes: 7248e308a5758761 ("perf tools: Record ARM64 LR register automatically") Signed-off-by: German Gomez Cc: Alexander Shishkin Cc: Alexandre Truong Cc: Ian Rogers Cc: James Clark Cc: Jiri Olsa Cc: John Fastabend Cc: KP Singh Cc: Mark Rutland Cc: Martin KaFai Lau Cc: Namhyung Kim Cc: Song Liu Cc: Yonghong Song Link: http://lore.kernel.org/lkml/20220125104435.2737-1-german.gomez@arm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/tests/attr/README | 2 ++ tools/perf/tests/attr/test-record-graph-default | 2 ++ tools/perf/tests/attr/test-record-graph-default-aarch64 | 9 +++++++++ tools/perf/tests/attr/test-record-graph-fp | 2 ++ tools/perf/tests/attr/test-record-graph-fp-aarch64 | 9 +++++++++ 5 files changed, 24 insertions(+) create mode 100644 tools/perf/tests/attr/test-record-graph-default-aarch64 create mode 100644 tools/perf/tests/attr/test-record-graph-fp-aarch64 diff --git a/tools/perf/tests/attr/README b/tools/perf/tests/attr/README index a36f49fb4dbea3..1116fc6bf2ac1d 100644 --- a/tools/perf/tests/attr/README +++ b/tools/perf/tests/attr/README @@ -45,8 +45,10 @@ Following tests are defined (with perf commands): perf record -d kill (test-record-data) perf record -F 100 kill (test-record-freq) perf record -g kill (test-record-graph-default) + perf record -g kill (test-record-graph-default-aarch64) perf record --call-graph dwarf kill (test-record-graph-dwarf) perf record --call-graph fp kill (test-record-graph-fp) + perf record --call-graph fp kill (test-record-graph-fp-aarch64) perf record --group -e cycles,instructions kill (test-record-group) perf record -e '{cycles,instructions}' kill (test-record-group1) perf record -e '{cycles/period=1/,instructions/period=2/}:S' kill (test-record-group2) diff --git a/tools/perf/tests/attr/test-record-graph-default b/tools/perf/tests/attr/test-record-graph-default index 5d8234d508452e..f0a18b4ea4f562 100644 --- a/tools/perf/tests/attr/test-record-graph-default +++ b/tools/perf/tests/attr/test-record-graph-default @@ -2,6 +2,8 @@ command = record args = --no-bpf-event -g kill >/dev/null 2>&1 ret = 1 +# arm64 enables registers in the default mode (fp) +arch = !aarch64 [event:base-record] sample_type=295 diff --git a/tools/perf/tests/attr/test-record-graph-default-aarch64 b/tools/perf/tests/attr/test-record-graph-default-aarch64 new file mode 100644 index 00000000000000..e98d62efb6f7ee --- /dev/null +++ b/tools/perf/tests/attr/test-record-graph-default-aarch64 @@ -0,0 +1,9 @@ +[config] +command = record +args = --no-bpf-event -g kill >/dev/null 2>&1 +ret = 1 +arch = aarch64 + +[event:base-record] +sample_type=4391 +sample_regs_user=1073741824 diff --git a/tools/perf/tests/attr/test-record-graph-fp b/tools/perf/tests/attr/test-record-graph-fp index 5630521c0b0f3f..a6e60e83920514 100644 --- a/tools/perf/tests/attr/test-record-graph-fp +++ b/tools/perf/tests/attr/test-record-graph-fp @@ -2,6 +2,8 @@ command = record args = --no-bpf-event --call-graph fp kill >/dev/null 2>&1 ret = 1 +# arm64 enables registers in fp mode +arch = !aarch64 [event:base-record] sample_type=295 diff --git a/tools/perf/tests/attr/test-record-graph-fp-aarch64 b/tools/perf/tests/attr/test-record-graph-fp-aarch64 new file mode 100644 index 00000000000000..cbeea9971285b1 --- /dev/null +++ b/tools/perf/tests/attr/test-record-graph-fp-aarch64 @@ -0,0 +1,9 @@ +[config] +command = record +args = --no-bpf-event --call-graph fp kill >/dev/null 2>&1 +ret = 1 +arch = aarch64 + +[event:base-record] +sample_type=4391 +sample_regs_user=1073741824 From bfe55a1f7fd6bfede16078bf04c6250fbca11588 Mon Sep 17 00:00:00 2001 From: Woody Suwalski Date: Wed, 9 Feb 2022 16:05:09 -0500 Subject: [PATCH 236/493] ACPI: processor: idle: fix lockup regression on 32-bit ThinkPad T40 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add and ACPI idle power level limit for 32-bit ThinkPad T40. There is a regression on T40 introduced by commit d6b88ce2, starting with kernel 5.16: commit d6b88ce2eb9d2698eb24451eb92c0a1649b17bb1 Author: Richard Gong Date:   Wed Sep 22 08:31:16 2021 -0500 ACPI: processor idle: Allow playing dead in C3 state The above patch is trying to enter C3 state during init, what is causing a T40 system freeze. I have not found a similar issue on any other of my 32-bit machines. The fix is to add another exception to the processor_power_dmi_table[] list. As a result the dmesg shows as expected: [2.155398] ACPI: IBM ThinkPad T40 detected - limiting to C2 max_cstate. Override with "processor.max_cstate=9" [2.155404] ACPI: processor limited to max C-state 2 The fix is trivial and affects only vintage T40 systems. Fixes: d6b88ce2eb9d ("CPI: processor idle: Allow playing dead in C3 state") Signed-off-by: Woody Suwalski Reviewed-by: Hans de Goede Cc: 5.16+ # 5.16+ [ rjw: New subject ] Signed-off-by: Rafael J. Wysocki --- drivers/acpi/processor_idle.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 86560a28751b2f..f8e9fa82cb9b16 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -96,6 +96,11 @@ static const struct dmi_system_id processor_power_dmi_table[] = { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), DMI_MATCH(DMI_PRODUCT_NAME,"L8400B series Notebook PC")}, (void *)1}, + /* T40 can not handle C3 idle state */ + { set_max_cstate, "IBM ThinkPad T40", { + DMI_MATCH(DMI_SYS_VENDOR, "IBM"), + DMI_MATCH(DMI_PRODUCT_NAME, "23737CU")}, + (void *)2}, {}, }; From 3593030761630e09200072a4bd06468892c27be3 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 15 Feb 2022 15:28:00 -0800 Subject: [PATCH 237/493] tty: n_tty: do not look ahead for EOL character past the end of the buffer Daniel Gibson reports that the n_tty code gets line termination wrong in very specific cases: "If you feed a line with exactly 64 chars + terminating newline, and directly afterwards (without reading) another line into a pseudo terminal, the the first read() on the other side will return the 64 char line *without* terminating newline, and the next read() will return the missing terminating newline AND the complete next line (if it fits in the buffer)" and bisected the behavior to commit 3b830a9c34d5 ("tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer"). Now, digging deeper, it turns out that the behavior isn't exactly new: what changed in commit 3b830a9c34d5 was that the tty line discipline .read() function is now passed an intermediate kernel buffer rather than the final user space buffer. And that intermediate kernel buffer is 64 bytes in size - thus that special case with exactly 64 bytes plus terminating newline. The same problem did exist before, but historically the boundary was not the 64-byte chunk, but the user-supplied buffer size, which is obviously generally bigger (and potentially bigger than N_TTY_BUF_SIZE, which would hide the issue entirely). The reason is that the n_tty canon_copy_from_read_buf() code would look ahead for the EOL character one byte further than it would actually copy. It would then decide that it had found the terminator, and unmark it as an EOL character - which in turn explains why the next read wouldn't then be terminated by it. Now, the reason it did all this in the first place is related to some historical and pretty obscure EOF behavior, see commit ac8f3bf8832a ("n_tty: Fix poll() after buffer-limited eof push read") and commit 40d5e0905a03 ("n_tty: Fix EOF push handling"). And the reason for the EOL confusion is that we treat EOF as a special EOL condition, with the EOL character being NUL (aka "__DISABLED_CHAR" in the kernel sources). So that EOF look-ahead also affects the normal EOL handling. This patch just removes the look-ahead that causes problems, because EOL is much more critical than the historical "EOF in the middle of a line that coincides with the end of the buffer" handling ever was. Now, it is possible that we should indeed re-introduce the "look at next character to see if it's a EOF" behavior, but if so, that should be done not at the kernel buffer chunk boundary in canon_copy_from_read_buf(), but at a higher level, when we run out of the user buffer. In particular, the place to do that would be at the top of 'n_tty_read()', where we check if it's a continuation of a previously started read, and there is no more buffer space left, we could decide to just eat the __DISABLED_CHAR at that point. But that would be a separate patch, because I suspect nobody actually cares, and I'd like to get a report about it before bothering. Fixes: 3b830a9c34d5 ("tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer") Fixes: ac8f3bf8832a ("n_tty: Fix poll() after buffer-limited eof push read") Fixes: 40d5e0905a03 ("n_tty: Fix EOF push handling") Link: https://bugzilla.kernel.org/show_bug.cgi?id=215611 Reported-and-tested-by: Daniel Gibson Cc: Peter Hurley Cc: Greg Kroah-Hartman Cc: Jiri Slaby Signed-off-by: Linus Torvalds --- drivers/tty/n_tty.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 5e988e5146531a..efc72104c84000 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1926,7 +1926,7 @@ static bool canon_copy_from_read_buf(struct tty_struct *tty, return false; canon_head = smp_load_acquire(&ldata->canon_head); - n = min(*nr + 1, canon_head - ldata->read_tail); + n = min(*nr, canon_head - ldata->read_tail); tail = ldata->read_tail & (N_TTY_BUF_SIZE - 1); size = min_t(size_t, tail + n, N_TTY_BUF_SIZE); @@ -1948,10 +1948,8 @@ static bool canon_copy_from_read_buf(struct tty_struct *tty, n += N_TTY_BUF_SIZE; c = n + found; - if (!found || read_buf(ldata, eol) != __DISABLED_CHAR) { - c = min(*nr, c); + if (!found || read_buf(ldata, eol) != __DISABLED_CHAR) n = c; - } n_tty_trace("%s: eol:%zu found:%d n:%zu c:%zu tail:%zu more:%zu\n", __func__, eol, found, n, c, tail, more); From d19e0183a88306acda07f4a01fedeeffe2a2a06b Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 15 Feb 2022 18:05:18 -0500 Subject: [PATCH 238/493] NFS: Do not report writeback errors in nfs_getattr() The result of the writeback, whether it is an ENOSPC or an EIO, or anything else, does not inhibit the NFS client from reporting the correct file timestamps. Fixes: 79566ef018f5 ("NFS: Getattr doesn't require data sync semantics") Signed-off-by: Trond Myklebust Signed-off-by: Anna Schumaker --- fs/nfs/inode.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index a918c3a834b6b7..d96baa4450e395 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -853,12 +853,9 @@ int nfs_getattr(struct user_namespace *mnt_userns, const struct path *path, } /* Flush out writes to the server in order to update c/mtime. */ - if ((request_mask & (STATX_CTIME|STATX_MTIME)) && - S_ISREG(inode->i_mode)) { - err = filemap_write_and_wait(inode->i_mapping); - if (err) - goto out; - } + if ((request_mask & (STATX_CTIME | STATX_MTIME)) && + S_ISREG(inode->i_mode)) + filemap_write_and_wait(inode->i_mapping); /* * We may force a getattr if the user cares about atime. From 45ce4b4f9009102cd9f581196d480a59208690c1 Mon Sep 17 00:00:00 2001 From: Kumar Kartikeya Dwivedi Date: Thu, 17 Feb 2022 01:49:43 +0530 Subject: [PATCH 239/493] bpf: Fix crash due to out of bounds access into reg2btf_ids. When commit e6ac2450d6de ("bpf: Support bpf program calling kernel function") added kfunc support, it defined reg2btf_ids as a cheap way to translate the verifier reg type to the appropriate btf_vmlinux BTF ID, however commit c25b2ae13603 ("bpf: Replace PTR_TO_XXX_OR_NULL with PTR_TO_XXX | PTR_MAYBE_NULL") moved the __BPF_REG_TYPE_MAX from the last member of bpf_reg_type enum to after the base register types, and defined other variants using type flag composition. However, now, the direct usage of reg->type to index into reg2btf_ids may no longer fall into __BPF_REG_TYPE_MAX range, and hence lead to out of bounds access and kernel crash on dereference of bad pointer. Fixes: c25b2ae13603 ("bpf: Replace PTR_TO_XXX_OR_NULL with PTR_TO_XXX | PTR_MAYBE_NULL") Signed-off-by: Kumar Kartikeya Dwivedi Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20220216201943.624869-1-memxor@gmail.com --- kernel/bpf/btf.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/kernel/bpf/btf.c b/kernel/bpf/btf.c index e16dafeb24504a..3e23b3fa79ff61 100644 --- a/kernel/bpf/btf.c +++ b/kernel/bpf/btf.c @@ -5688,7 +5688,8 @@ static int btf_check_func_arg_match(struct bpf_verifier_env *env, } if (check_ptr_off_reg(env, reg, regno)) return -EINVAL; - } else if (is_kfunc && (reg->type == PTR_TO_BTF_ID || reg2btf_ids[reg->type])) { + } else if (is_kfunc && (reg->type == PTR_TO_BTF_ID || + (reg2btf_ids[base_type(reg->type)] && !type_flag(reg->type)))) { const struct btf_type *reg_ref_t; const struct btf *reg_btf; const char *reg_ref_tname; @@ -5706,7 +5707,7 @@ static int btf_check_func_arg_match(struct bpf_verifier_env *env, reg_ref_id = reg->btf_id; } else { reg_btf = btf_vmlinux; - reg_ref_id = *reg2btf_ids[reg->type]; + reg_ref_id = *reg2btf_ids[base_type(reg->type)]; } reg_ref_t = btf_type_skip_modifiers(reg_btf, reg_ref_id, From a8e8f851e8299703a005cf23dfb9ec854a2611e5 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 15 Feb 2022 13:11:42 -0800 Subject: [PATCH 240/493] module: fix building with sysfs disabled Sysfs support might be disabled so we need to guard the code that instantiates "compression" attribute with an #ifdef. Fixes: b1ae6dc41eaa ("module: add in-kernel support for decompressing") Reported-by: kernel test robot Signed-off-by: Dmitry Torokhov Signed-off-by: Luis Chamberlain --- kernel/module_decompress.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/module_decompress.c b/kernel/module_decompress.c index b01c69c2ff9970..ffef98a203204b 100644 --- a/kernel/module_decompress.c +++ b/kernel/module_decompress.c @@ -250,6 +250,7 @@ void module_decompress_cleanup(struct load_info *info) info->max_pages = info->used_pages = 0; } +#ifdef CONFIG_SYSFS static ssize_t compression_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf) { @@ -269,3 +270,4 @@ static int __init module_decompress_sysfs_init(void) return 0; } late_initcall(module_decompress_sysfs_init); +#endif From 53923e0fe2098f90f339510aeaa0e1413ae99a16 Mon Sep 17 00:00:00 2001 From: Steve French Date: Wed, 16 Feb 2022 13:23:53 -0600 Subject: [PATCH 241/493] cifs: fix confusing unneeded warning message on smb2.1 and earlier When mounting with SMB2.1 or earlier, even with nomultichannel, we log the confusing warning message: "CIFS: VFS: multichannel is not supported on this protocol version, use 3.0 or above" Fix this so that we don't log this unless they really are trying to mount with multichannel. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215608 Reported-by: Kim Scarborough Cc: stable@vger.kernel.org # 5.11+ Reviewed-by: Paulo Alcantara (SUSE) Signed-off-by: Steve French --- fs/cifs/sess.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c index 5723d50340e5e8..32f478c7a66d86 100644 --- a/fs/cifs/sess.c +++ b/fs/cifs/sess.c @@ -127,11 +127,6 @@ int cifs_try_adding_channels(struct cifs_sb_info *cifs_sb, struct cifs_ses *ses) struct cifs_server_iface *ifaces = NULL; size_t iface_count; - if (ses->server->dialect < SMB30_PROT_ID) { - cifs_dbg(VFS, "multichannel is not supported on this protocol version, use 3.0 or above\n"); - return 0; - } - spin_lock(&ses->chan_lock); new_chan_count = old_chan_count = ses->chan_count; @@ -145,6 +140,12 @@ int cifs_try_adding_channels(struct cifs_sb_info *cifs_sb, struct cifs_ses *ses) return 0; } + if (ses->server->dialect < SMB30_PROT_ID) { + spin_unlock(&ses->chan_lock); + cifs_dbg(VFS, "multichannel is not supported on this protocol version, use 3.0 or above\n"); + return 0; + } + if (!(ses->server->capabilities & SMB2_GLOBAL_CAP_MULTI_CHANNEL)) { ses->chan_max = 1; spin_unlock(&ses->chan_lock); From c832962ac972082b3a1f89775c9d4274c8cb5670 Mon Sep 17 00:00:00 2001 From: Oleksandr Mazur Date: Tue, 15 Feb 2022 18:53:03 +0200 Subject: [PATCH 242/493] net: bridge: multicast: notify switchdev driver whenever MC processing gets disabled Whenever bridge driver hits the max capacity of MDBs, it disables the MC processing (by setting corresponding bridge option), but never notifies switchdev about such change (the notifiers are called only upon explicit setting of this option, through the registered netlink interface). This could lead to situation when Software MDB processing gets disabled, but this event never gets offloaded to the underlying Hardware. Fix this by adding a notify message in such case. Fixes: 147c1e9b902c ("switchdev: bridge: Offload multicast disabled") Signed-off-by: Oleksandr Mazur Acked-by: Nikolay Aleksandrov Link: https://lore.kernel.org/r/20220215165303.31908-1-oleksandr.mazur@plvision.eu Signed-off-by: Jakub Kicinski --- net/bridge/br_multicast.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index de240988948972..db4f2641d1cd1e 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -82,6 +82,9 @@ static void br_multicast_find_del_pg(struct net_bridge *br, struct net_bridge_port_group *pg); static void __br_multicast_stop(struct net_bridge_mcast *brmctx); +static int br_mc_disabled_update(struct net_device *dev, bool value, + struct netlink_ext_ack *extack); + static struct net_bridge_port_group * br_sg_port_find(struct net_bridge *br, struct net_bridge_port_group_sg_key *sg_p) @@ -1156,6 +1159,7 @@ struct net_bridge_mdb_entry *br_multicast_new_group(struct net_bridge *br, return mp; if (atomic_read(&br->mdb_hash_tbl.nelems) >= br->hash_max) { + br_mc_disabled_update(br->dev, false, NULL); br_opt_toggle(br, BROPT_MULTICAST_ENABLED, false); return ERR_PTR(-E2BIG); } From 0b0dff5b3b98c5c7ce848151df9da0b3cdf0cc8b Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Tue, 15 Feb 2022 11:00:37 -0500 Subject: [PATCH 243/493] ipv6: per-netns exclusive flowlabel checks Ipv6 flowlabels historically require a reservation before use. Optionally in exclusive mode (e.g., user-private). Commit 59c820b2317f ("ipv6: elide flowlabel check if no exclusive leases exist") introduced a fastpath that avoids this check when no exclusive leases exist in the system, and thus any flowlabel use will be granted. That allows skipping the control operation to reserve a flowlabel entirely. Though with a warning if the fast path fails: This is an optimization. Robust applications still have to revert to requesting leases if the fast path fails due to an exclusive lease. Still, this is subtle. Better isolate network namespaces from each other. Flowlabels are per-netns. Also record per-netns whether exclusive leases are in use. Then behavior does not change based on activity in other netns. Changes v2 - wrap in IS_ENABLED(CONFIG_IPV6) to avoid breakage if disabled Fixes: 59c820b2317f ("ipv6: elide flowlabel check if no exclusive leases exist") Link: https://lore.kernel.org/netdev/MWHPR2201MB1072BCCCFCE779E4094837ACD0329@MWHPR2201MB1072.namprd22.prod.outlook.com/ Reported-by: Congyu Liu Signed-off-by: Willem de Bruijn Tested-by: Congyu Liu Link: https://lore.kernel.org/r/20220215160037.1976072-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski --- include/net/ipv6.h | 5 ++++- include/net/netns/ipv6.h | 3 ++- net/ipv6/ip6_flowlabel.c | 4 +++- 3 files changed, 9 insertions(+), 3 deletions(-) diff --git a/include/net/ipv6.h b/include/net/ipv6.h index 3afcb128e06491..92eec13d169320 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -393,17 +393,20 @@ static inline void txopt_put(struct ipv6_txoptions *opt) kfree_rcu(opt, rcu); } +#if IS_ENABLED(CONFIG_IPV6) struct ip6_flowlabel *__fl6_sock_lookup(struct sock *sk, __be32 label); extern struct static_key_false_deferred ipv6_flowlabel_exclusive; static inline struct ip6_flowlabel *fl6_sock_lookup(struct sock *sk, __be32 label) { - if (static_branch_unlikely(&ipv6_flowlabel_exclusive.key)) + if (static_branch_unlikely(&ipv6_flowlabel_exclusive.key) && + READ_ONCE(sock_net(sk)->ipv6.flowlabel_has_excl)) return __fl6_sock_lookup(sk, label) ? : ERR_PTR(-ENOENT); return NULL; } +#endif struct ipv6_txoptions *fl6_merge_options(struct ipv6_txoptions *opt_space, struct ip6_flowlabel *fl, diff --git a/include/net/netns/ipv6.h b/include/net/netns/ipv6.h index a4b55038031652..6bd7e5a85ce76c 100644 --- a/include/net/netns/ipv6.h +++ b/include/net/netns/ipv6.h @@ -77,9 +77,10 @@ struct netns_ipv6 { spinlock_t fib6_gc_lock; unsigned int ip6_rt_gc_expire; unsigned long ip6_rt_last_gc; + unsigned char flowlabel_has_excl; #ifdef CONFIG_IPV6_MULTIPLE_TABLES - unsigned int fib6_rules_require_fldissect; bool fib6_has_custom_rules; + unsigned int fib6_rules_require_fldissect; #ifdef CONFIG_IPV6_SUBTREES unsigned int fib6_routes_require_src; #endif diff --git a/net/ipv6/ip6_flowlabel.c b/net/ipv6/ip6_flowlabel.c index aa673a6a7e4328..ceb85c67ce3952 100644 --- a/net/ipv6/ip6_flowlabel.c +++ b/net/ipv6/ip6_flowlabel.c @@ -450,8 +450,10 @@ fl_create(struct net *net, struct sock *sk, struct in6_flowlabel_req *freq, err = -EINVAL; goto done; } - if (fl_shared_exclusive(fl) || fl->opt) + if (fl_shared_exclusive(fl) || fl->opt) { + WRITE_ONCE(sock_net(sk)->ipv6.flowlabel_has_excl, 1); static_branch_deferred_inc(&ipv6_flowlabel_exclusive); + } return fl; done: From 8c6ae46150a453f8ae9a6cd49b45f354f478587d Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Tue, 15 Feb 2022 13:42:48 +0300 Subject: [PATCH 244/493] net: dsa: lantiq_gswip: fix use after free in gswip_remove() of_node_put(priv->ds->slave_mii_bus->dev.of_node) should be done before mdiobus_free(priv->ds->slave_mii_bus). Signed-off-by: Alexey Khoroshilov Fixes: 0d120dfb5d67 ("net: dsa: lantiq_gswip: don't use devres for mdiobus") Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/1644921768-26477-1-git-send-email-khoroshilov@ispras.ru Signed-off-by: Jakub Kicinski --- drivers/net/dsa/lantiq_gswip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c index 320ee7fe91a8cf..8a7a8093a15690 100644 --- a/drivers/net/dsa/lantiq_gswip.c +++ b/drivers/net/dsa/lantiq_gswip.c @@ -2176,8 +2176,8 @@ static int gswip_remove(struct platform_device *pdev) if (priv->ds->slave_mii_bus) { mdiobus_unregister(priv->ds->slave_mii_bus); - mdiobus_free(priv->ds->slave_mii_bus); of_node_put(priv->ds->slave_mii_bus->dev.of_node); + mdiobus_free(priv->ds->slave_mii_bus); } for (i = 0; i < priv->num_gphy_fw; i++) From c08e58438d4a709fb451b6d7d33432cc9907a2a8 Mon Sep 17 00:00:00 2001 From: Jon Maloy Date: Tue, 15 Feb 2022 21:00:09 -0500 Subject: [PATCH 245/493] tipc: fix wrong notification node addresses The previous bug fix had an unfortunate side effect that broke distribution of binding table entries between nodes. The updated tipc_sock_addr struct is also used further down in the same function, and there the old value is still the correct one. Fixes: 032062f363b4 ("tipc: fix wrong publisher node address in link publications") Signed-off-by: Jon Maloy Link: https://lore.kernel.org/r/20220216020009.3404578-1-jmaloy@redhat.com Signed-off-by: Jakub Kicinski --- net/tipc/node.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/net/tipc/node.c b/net/tipc/node.c index fd95df338da71f..6ef95ce565bd37 100644 --- a/net/tipc/node.c +++ b/net/tipc/node.c @@ -403,7 +403,7 @@ static void tipc_node_write_unlock(struct tipc_node *n) u32 flags = n->action_flags; struct list_head *publ_list; struct tipc_uaddr ua; - u32 bearer_id; + u32 bearer_id, node; if (likely(!flags)) { write_unlock_bh(&n->lock); @@ -414,6 +414,7 @@ static void tipc_node_write_unlock(struct tipc_node *n) TIPC_LINK_STATE, n->addr, n->addr); sk.ref = n->link_id; sk.node = tipc_own_addr(net); + node = n->addr; bearer_id = n->link_id & 0xffff; publ_list = &n->publ_list; @@ -423,17 +424,17 @@ static void tipc_node_write_unlock(struct tipc_node *n) write_unlock_bh(&n->lock); if (flags & TIPC_NOTIFY_NODE_DOWN) - tipc_publ_notify(net, publ_list, sk.node, n->capabilities); + tipc_publ_notify(net, publ_list, node, n->capabilities); if (flags & TIPC_NOTIFY_NODE_UP) - tipc_named_node_up(net, sk.node, n->capabilities); + tipc_named_node_up(net, node, n->capabilities); if (flags & TIPC_NOTIFY_LINK_UP) { - tipc_mon_peer_up(net, sk.node, bearer_id); + tipc_mon_peer_up(net, node, bearer_id); tipc_nametbl_publish(net, &ua, &sk, sk.ref); } if (flags & TIPC_NOTIFY_LINK_DOWN) { - tipc_mon_peer_down(net, sk.node, bearer_id); + tipc_mon_peer_down(net, node, bearer_id); tipc_nametbl_withdraw(net, &ua, &sk, sk.ref); } } From 5740d068909676d4bdb5c9c00c37a83df7728909 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 15 Feb 2022 15:53:05 -0800 Subject: [PATCH 246/493] net: sched: limit TC_ACT_REPEAT loops We have been living dangerously, at the mercy of malicious users, abusing TC_ACT_REPEAT, as shown by this syzpot report [1]. Add an arbitrary limit (32) to the number of times an action can return TC_ACT_REPEAT. v2: switch the limit to 32 instead of 10. Use net_warn_ratelimited() instead of pr_err_once(). [1] (C repro available on demand) rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 1-...!: (10500 ticks this GP) idle=021/1/0x4000000000000000 softirq=5592/5592 fqs=0 (t=10502 jiffies g=5305 q=190) rcu: rcu_preempt kthread timer wakeup didn't happen for 10502 jiffies! g5305 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 rcu: Possible timer handling issue on cpu=0 timer-softirq=3527 rcu: rcu_preempt kthread starved for 10505 jiffies! g5305 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_preempt state:I stack:29344 pid: 14 ppid: 2 flags:0x00004000 Call Trace: context_switch kernel/sched/core.c:4986 [inline] __schedule+0xab2/0x4db0 kernel/sched/core.c:6295 schedule+0xd2/0x260 kernel/sched/core.c:6368 schedule_timeout+0x14a/0x2a0 kernel/time/timer.c:1881 rcu_gp_fqs_loop+0x186/0x810 kernel/rcu/tree.c:1963 rcu_gp_kthread+0x1de/0x320 kernel/rcu/tree.c:2136 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 rcu: Stack dump where RCU GP kthread last ran: Sending NMI from CPU 1 to CPUs 0: NMI backtrace for cpu 0 CPU: 0 PID: 3646 Comm: syz-executor358 Not tainted 5.17.0-rc3-syzkaller-00149-gbf8e59fd315f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:rep_nop arch/x86/include/asm/vdso/processor.h:13 [inline] RIP: 0010:cpu_relax arch/x86/include/asm/vdso/processor.h:18 [inline] RIP: 0010:pv_wait_head_or_lock kernel/locking/qspinlock_paravirt.h:437 [inline] RIP: 0010:__pv_queued_spin_lock_slowpath+0x3b8/0xb40 kernel/locking/qspinlock.c:508 Code: 48 89 eb c6 45 01 01 41 bc 00 80 00 00 48 c1 e9 03 83 e3 07 41 be 01 00 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8d 2c 01 eb 0c 90 41 83 ec 01 0f 84 72 04 00 00 41 0f b6 45 00 38 d8 7f 08 84 RSP: 0018:ffffc9000283f1b0 EFLAGS: 00000206 RAX: 0000000000000003 RBX: 0000000000000000 RCX: 1ffff1100fc0071e RDX: 0000000000000001 RSI: 0000000000000201 RDI: 0000000000000000 RBP: ffff88807e0038f0 R08: 0000000000000001 R09: ffffffff8ffbf9ff R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000004c1e R13: ffffed100fc0071e R14: 0000000000000001 R15: ffff8880b9c3aa80 FS: 00005555562bf300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffdbfef12b8 CR3: 00000000723c2000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: pv_queued_spin_lock_slowpath arch/x86/include/asm/paravirt.h:591 [inline] queued_spin_lock_slowpath arch/x86/include/asm/qspinlock.h:51 [inline] queued_spin_lock include/asm-generic/qspinlock.h:85 [inline] do_raw_spin_lock+0x200/0x2b0 kernel/locking/spinlock_debug.c:115 spin_lock_bh include/linux/spinlock.h:354 [inline] sch_tree_lock include/net/sch_generic.h:610 [inline] sch_tree_lock include/net/sch_generic.h:605 [inline] prio_tune+0x3b9/0xb50 net/sched/sch_prio.c:211 prio_init+0x5c/0x80 net/sched/sch_prio.c:244 qdisc_create.constprop.0+0x44a/0x10f0 net/sched/sch_api.c:1253 tc_modify_qdisc+0x4c5/0x1980 net/sched/sch_api.c:1660 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5594 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:725 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2413 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2496 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f7ee98aae99 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffdbfef12d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ffdbfef1300 RCX: 00007f7ee98aae99 RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000003 RBP: 0000000000000000 R08: 000000000000000d R09: 000000000000000d R10: 000000000000000d R11: 0000000000000246 R12: 00007ffdbfef12f0 R13: 00000000000f4240 R14: 000000000004ca47 R15: 00007ffdbfef12e4 INFO: NMI handler (nmi_cpu_backtrace_handler) took too long to run: 2.293 msecs NMI backtrace for cpu 1 CPU: 1 PID: 3260 Comm: kworker/1:3 Not tainted 5.17.0-rc3-syzkaller-00149-gbf8e59fd315f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: mld mld_ifc_work Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 nmi_cpu_backtrace.cold+0x47/0x144 lib/nmi_backtrace.c:111 nmi_trigger_cpumask_backtrace+0x1b3/0x230 lib/nmi_backtrace.c:62 trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline] rcu_dump_cpu_stacks+0x25e/0x3f0 kernel/rcu/tree_stall.h:343 print_cpu_stall kernel/rcu/tree_stall.h:604 [inline] check_cpu_stall kernel/rcu/tree_stall.h:688 [inline] rcu_pending kernel/rcu/tree.c:3919 [inline] rcu_sched_clock_irq.cold+0x5c/0x759 kernel/rcu/tree.c:2617 update_process_times+0x16d/0x200 kernel/time/timer.c:1785 tick_sched_handle+0x9b/0x180 kernel/time/tick-sched.c:226 tick_sched_timer+0x1b0/0x2d0 kernel/time/tick-sched.c:1428 __run_hrtimer kernel/time/hrtimer.c:1685 [inline] __hrtimer_run_queues+0x1c0/0xe50 kernel/time/hrtimer.c:1749 hrtimer_interrupt+0x31c/0x790 kernel/time/hrtimer.c:1811 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1086 [inline] __sysvec_apic_timer_interrupt+0x146/0x530 arch/x86/kernel/apic/apic.c:1103 sysvec_apic_timer_interrupt+0x8e/0xc0 arch/x86/kernel/apic/apic.c:1097 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638 RIP: 0010:__sanitizer_cov_trace_const_cmp4+0xc/0x70 kernel/kcov.c:286 Code: 00 00 00 48 89 7c 30 e8 48 89 4c 30 f0 4c 89 54 d8 20 48 89 10 5b c3 0f 1f 80 00 00 00 00 41 89 f8 bf 03 00 00 00 4c 8b 14 24 <89> f1 65 48 8b 34 25 00 70 02 00 e8 14 f9 ff ff 84 c0 74 4b 48 8b RSP: 0018:ffffc90002c5eea8 EFLAGS: 00000246 RAX: 0000000000000007 RBX: ffff88801c625800 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: ffff8880137d3100 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff874fcd88 R11: 0000000000000000 R12: ffff88801d692dc0 R13: ffff8880137d3104 R14: 0000000000000000 R15: ffff88801d692de8 tcf_police_act+0x358/0x11d0 net/sched/act_police.c:256 tcf_action_exec net/sched/act_api.c:1049 [inline] tcf_action_exec+0x1a6/0x530 net/sched/act_api.c:1026 tcf_exts_exec include/net/pkt_cls.h:326 [inline] route4_classify+0xef0/0x1400 net/sched/cls_route.c:179 __tcf_classify net/sched/cls_api.c:1549 [inline] tcf_classify+0x3e8/0x9d0 net/sched/cls_api.c:1615 prio_classify net/sched/sch_prio.c:42 [inline] prio_enqueue+0x3a7/0x790 net/sched/sch_prio.c:75 dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3668 __dev_xmit_skb net/core/dev.c:3756 [inline] __dev_queue_xmit+0x1f61/0x3660 net/core/dev.c:4081 neigh_hh_output include/net/neighbour.h:533 [inline] neigh_output include/net/neighbour.h:547 [inline] ip_finish_output2+0x14dc/0x2170 net/ipv4/ip_output.c:228 __ip_finish_output net/ipv4/ip_output.c:306 [inline] __ip_finish_output+0x396/0x650 net/ipv4/ip_output.c:288 ip_finish_output+0x32/0x200 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip_output+0x196/0x310 net/ipv4/ip_output.c:430 dst_output include/net/dst.h:451 [inline] ip_local_out+0xaf/0x1a0 net/ipv4/ip_output.c:126 iptunnel_xmit+0x628/0xa50 net/ipv4/ip_tunnel_core.c:82 geneve_xmit_skb drivers/net/geneve.c:966 [inline] geneve_xmit+0x10c8/0x3530 drivers/net/geneve.c:1077 __netdev_start_xmit include/linux/netdevice.h:4683 [inline] netdev_start_xmit include/linux/netdevice.h:4697 [inline] xmit_one net/core/dev.c:3473 [inline] dev_hard_start_xmit+0x1eb/0x920 net/core/dev.c:3489 __dev_queue_xmit+0x2985/0x3660 net/core/dev.c:4116 neigh_hh_output include/net/neighbour.h:533 [inline] neigh_output include/net/neighbour.h:547 [inline] ip6_finish_output2+0xf7a/0x14f0 net/ipv6/ip6_output.c:126 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline] __ip6_finish_output+0x61e/0xe90 net/ipv6/ip6_output.c:170 ip6_finish_output+0x32/0x200 net/ipv6/ip6_output.c:201 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:224 dst_output include/net/dst.h:451 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] mld_sendpack+0x9a3/0xe40 net/ipv6/mcast.c:1826 mld_send_cr net/ipv6/mcast.c:2127 [inline] mld_ifc_work+0x71c/0xdc0 net/ipv6/mcast.c:2659 process_one_work+0x9ac/0x1650 kernel/workqueue.c:2307 worker_thread+0x657/0x1110 kernel/workqueue.c:2454 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 ---------------- Code disassembly (best guess): 0: 48 89 eb mov %rbp,%rbx 3: c6 45 01 01 movb $0x1,0x1(%rbp) 7: 41 bc 00 80 00 00 mov $0x8000,%r12d d: 48 c1 e9 03 shr $0x3,%rcx 11: 83 e3 07 and $0x7,%ebx 14: 41 be 01 00 00 00 mov $0x1,%r14d 1a: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax 21: fc ff df 24: 4c 8d 2c 01 lea (%rcx,%rax,1),%r13 28: eb 0c jmp 0x36 * 2a: f3 90 pause <-- trapping instruction 2c: 41 83 ec 01 sub $0x1,%r12d 30: 0f 84 72 04 00 00 je 0x4a8 36: 41 0f b6 45 00 movzbl 0x0(%r13),%eax 3b: 38 d8 cmp %bl,%al 3d: 7f 08 jg 0x47 3f: 84 .byte 0x84 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet Acked-by: Jamal Hadi Salim Cc: Cong Wang Cc: Jiri Pirko Reported-by: syzbot Link: https://lore.kernel.org/r/20220215235305.3272331-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski --- net/sched/act_api.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/net/sched/act_api.c b/net/sched/act_api.c index 32563cef85bfa2..2811348f3acc0b 100644 --- a/net/sched/act_api.c +++ b/net/sched/act_api.c @@ -1037,6 +1037,7 @@ int tcf_action_exec(struct sk_buff *skb, struct tc_action **actions, restart_act_graph: for (i = 0; i < nr_actions; i++) { const struct tc_action *a = actions[i]; + int repeat_ttl; if (jmp_prgcnt > 0) { jmp_prgcnt -= 1; @@ -1045,11 +1046,17 @@ int tcf_action_exec(struct sk_buff *skb, struct tc_action **actions, if (tc_act_skip_sw(a->tcfa_flags)) continue; + + repeat_ttl = 32; repeat: ret = a->ops->act(skb, a, res); - if (ret == TC_ACT_REPEAT) - goto repeat; /* we need a ttl - JHS */ - + if (unlikely(ret == TC_ACT_REPEAT)) { + if (--repeat_ttl != 0) + goto repeat; + /* suspicious opcode, stop pipeline */ + net_warn_ratelimited("TC_ACT_REPEAT abuse ?\n"); + return TC_ACT_OK; + } if (TC_ACT_EXT_CMP(ret, TC_ACT_JUMP)) { jmp_prgcnt = ret & TCA_ACT_MAX_PRIO_MASK; if (!jmp_prgcnt || (jmp_prgcnt > nr_actions)) { From 16693c1b2d98cebc8dedf03b49d1053cf1826c86 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Wed, 16 Feb 2022 09:17:43 +0000 Subject: [PATCH 247/493] drm/tegra: Fix cast to restricted __le32 Sparse warns about the following cast in the function falcon_copy_firmware_image() ... drivers/gpu/drm/tegra/falcon.c:66:27: warning: cast to restricted __le32 Fix this by casting the firmware data array to __le32 instead of u32. Signed-off-by: Jon Hunter Signed-off-by: Thierry Reding --- drivers/gpu/drm/tegra/falcon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/tegra/falcon.c b/drivers/gpu/drm/tegra/falcon.c index 223ab2ceb7e626..3762d87759d98c 100644 --- a/drivers/gpu/drm/tegra/falcon.c +++ b/drivers/gpu/drm/tegra/falcon.c @@ -63,7 +63,7 @@ static void falcon_copy_firmware_image(struct falcon *falcon, /* copy the whole thing taking into account endianness */ for (i = 0; i < firmware->size / sizeof(u32); i++) - virt[i] = le32_to_cpu(((u32 *)firmware->data)[i]); + virt[i] = le32_to_cpu(((__le32 *)firmware->data)[i]); } static int falcon_parse_firmware_image(struct falcon *falcon) From acd289e04a0a1f52bea7ff1129b365626059e3c2 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 15 Feb 2022 14:27:54 +0100 Subject: [PATCH 248/493] ALSA: hda: Set max DMA segment size The recent code refactoring to use the standard DMA helper requires the max DMA segment size setup for SG list management. Without it, the kernel may spew warnings when a large buffer is allocated. This patch sets up dma_set_max_seg_size() for avoiding spurious warnings. Fixes: 2c95b92ecd92 ("ALSA: memalloc: Unify x86 SG-buffer handling (take#3)") Cc: BugLink: https://github.com/thesofproject/linux/issues/3430 Link: https://lore.kernel.org/r/20220215132756.31236-2-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 917ad9d375b179..572ff0d1fafeee 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -1941,6 +1941,7 @@ static int azx_first_init(struct azx *chip) dma_bits = 32; if (dma_set_mask_and_coherent(&pci->dev, DMA_BIT_MASK(dma_bits))) dma_set_mask_and_coherent(&pci->dev, DMA_BIT_MASK(32)); + dma_set_max_seg_size(&pci->dev, UINT_MAX); /* read number of streams from GCAP register instead of using * hardcoded value From 8872fc0d04592925b74ad9ab1b5686f4e016befe Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 15 Feb 2022 14:27:55 +0100 Subject: [PATCH 249/493] ASoC: SOF: hda: Set max DMA segment size The recent code refactoring to use the standard DMA helper requires the max DMA segment size setup for SG list management. Without it, the kernel may spew warnings when a large buffer is allocated. This patch sets up dma_set_max_seg_size() for avoiding spurious warnings. Fixes: 2c95b92ecd92 ("ALSA: memalloc: Unify x86 SG-buffer handling (take#3)") Acked-by: Mark Brown Cc: BugLink: https://github.com/thesofproject/linux/issues/3430 Link: https://lore.kernel.org/r/20220215132756.31236-3-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/soc/sof/intel/hda.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/sof/intel/hda.c b/sound/soc/sof/intel/hda.c index c8fb082209ce48..1385695d774582 100644 --- a/sound/soc/sof/intel/hda.c +++ b/sound/soc/sof/intel/hda.c @@ -956,6 +956,7 @@ int hda_dsp_probe(struct snd_sof_dev *sdev) dev_dbg(sdev->dev, "DMA mask is 32 bit\n"); dma_set_mask_and_coherent(&pci->dev, DMA_BIT_MASK(32)); } + dma_set_max_seg_size(&pci->dev, UINT_MAX); /* init streams */ ret = hda_dsp_stream_init(sdev); From c22a8086b384025ab97ce07465420a219697d3f2 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 15 Feb 2022 14:27:56 +0100 Subject: [PATCH 250/493] ASoC: intel: skylake: Set max DMA segment size The recent code refactoring to use the standard DMA helper requires the max DMA segment size setup for SG list management. Without it, the kernel may spew warnings when a large buffer is allocated. This patch sets up dma_set_max_seg_size() for avoiding spurious warnings. Fixes: 2c95b92ecd92 ("ALSA: memalloc: Unify x86 SG-buffer handling (take#3)") Acked-by: Cezary Rojewski Acked-by: Mark Brown Cc: BugLink: https://github.com/thesofproject/linux/issues/3430 Link: https://lore.kernel.org/r/20220215132756.31236-4-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/soc/intel/skylake/skl.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index 148ddf4cace0d5..aeca58246fc77b 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -952,6 +952,7 @@ static int skl_first_init(struct hdac_bus *bus) /* allow 64bit DMA address if supported by H/W */ if (dma_set_mask_and_coherent(bus->dev, DMA_BIT_MASK(64))) dma_set_mask_and_coherent(bus->dev, DMA_BIT_MASK(32)); + dma_set_max_seg_size(bus->dev, UINT_MAX); /* initialize streams */ snd_hdac_ext_stream_init_all From 31ded1535e3182778a1d0e5c32711f55da3bc512 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Wed, 16 Feb 2022 16:01:00 -0300 Subject: [PATCH 251/493] perf bpf: Defer freeing string after possible strlen() on it This was detected by the gcc in Fedora Rawhide's gcc: 50 11.01 fedora:rawhide : FAIL gcc version 12.0.1 20220205 (Red Hat 12.0.1-0) (GCC) inlined from 'bpf__config_obj' at util/bpf-loader.c:1242:9: util/bpf-loader.c:1225:34: error: pointer 'map_opt' may be used after 'free' [-Werror=use-after-free] 1225 | *key_scan_pos += strlen(map_opt); | ^~~~~~~~~~~~~~~ util/bpf-loader.c:1223:9: note: call to 'free' here 1223 | free(map_name); | ^~~~~~~~~~~~~~ cc1: all warnings being treated as errors So do the calculations on the pointer before freeing it. Fixes: 04f9bf2bac72480c ("perf bpf-loader: Add missing '*' for key_scan_pos") Cc: Adrian Hunter Cc: Ian Rogers Cc: Jiri Olsa Cc: Namhyung Kim Cc: Wang ShaoBo Link: https://lore.kernel.org/lkml/Yg1VtQxKrPpS3uNA@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/bpf-loader.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/perf/util/bpf-loader.c b/tools/perf/util/bpf-loader.c index 7ecfaac7536a1b..16ec605a9fe46a 100644 --- a/tools/perf/util/bpf-loader.c +++ b/tools/perf/util/bpf-loader.c @@ -1220,9 +1220,10 @@ bpf__obj_config_map(struct bpf_object *obj, pr_debug("ERROR: Invalid map config option '%s'\n", map_opt); err = -BPF_LOADER_ERRNO__OBJCONF_MAP_OPT; out: - free(map_name); if (!err) *key_scan_pos += strlen(map_opt); + + free(map_name); return err; } From 21e8a96377e6b6debae42164605bf9dcbe5720c5 Mon Sep 17 00:00:00 2001 From: Daniele Palmas Date: Tue, 15 Feb 2022 12:13:35 +0100 Subject: [PATCH 252/493] net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990 Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit FN990 0x1071 composition in order to avoid bind error. Signed-off-by: Daniele Palmas Signed-off-by: David S. Miller --- drivers/net/usb/cdc_mbim.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c index 82bb5ed94c4858..c0b8b4aa78f379 100644 --- a/drivers/net/usb/cdc_mbim.c +++ b/drivers/net/usb/cdc_mbim.c @@ -659,6 +659,11 @@ static const struct usb_device_id mbim_devs[] = { .driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle, }, + /* Telit FN990 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x1bc7, 0x1071, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle, + }, + /* default entry */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long)&cdc_mbim_info_zlp, From 127770ac0d043435375ab86434f31a93efa88215 Mon Sep 17 00:00:00 2001 From: Aaron Lewis Date: Mon, 14 Feb 2022 21:29:51 +0000 Subject: [PATCH 253/493] KVM: x86: Add KVM_CAP_ENABLE_CAP to x86 Follow the precedent set by other architectures that support the VCPU ioctl, KVM_ENABLE_CAP, and advertise the VM extension, KVM_CAP_ENABLE_CAP. This way, userspace can ensure that KVM_ENABLE_CAP is available on a vcpu before using it. Fixes: 5c919412fe61 ("kvm/x86: Hyper-V synthetic interrupt controller") Signed-off-by: Aaron Lewis Message-Id: <20220214212950.1776943-1-aaronlewis@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini --- Documentation/virt/kvm/api.rst | 2 +- arch/x86/kvm/x86.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst index a4267104db50a4..3b4da6c7b25f9e 100644 --- a/Documentation/virt/kvm/api.rst +++ b/Documentation/virt/kvm/api.rst @@ -1394,7 +1394,7 @@ documentation when it pops into existence). ------------------- :Capability: KVM_CAP_ENABLE_CAP -:Architectures: mips, ppc, s390 +:Architectures: mips, ppc, s390, x86 :Type: vcpu ioctl :Parameters: struct kvm_enable_cap (in) :Returns: 0 on success; -1 on error diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 641044db415dee..b8bd8da320456c 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -4233,6 +4233,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) case KVM_CAP_EXIT_ON_EMULATION_FAILURE: case KVM_CAP_VCPU_ATTRIBUTES: case KVM_CAP_SYS_ATTRIBUTES: + case KVM_CAP_ENABLE_CAP: r = 1; break; case KVM_CAP_EXIT_HYPERCALL: From 4cb9a998b1ce25fad74a82f5a5c45a4ef40de337 Mon Sep 17 00:00:00 2001 From: Wanpeng Li Date: Tue, 15 Feb 2022 02:15:42 -0800 Subject: [PATCH 254/493] KVM: Fix lockdep false negative during host resume I saw the below splatting after the host suspended and resumed. WARNING: CPU: 0 PID: 2943 at kvm/arch/x86/kvm/../../../virt/kvm/kvm_main.c:5531 kvm_resume+0x2c/0x30 [kvm] CPU: 0 PID: 2943 Comm: step_after_susp Tainted: G W IOE 5.17.0-rc3+ #4 RIP: 0010:kvm_resume+0x2c/0x30 [kvm] Call Trace: syscore_resume+0x90/0x340 suspend_devices_and_enter+0xaee/0xe90 pm_suspend.cold+0x36b/0x3c2 state_store+0x82/0xf0 kernfs_fop_write_iter+0x1b6/0x260 new_sync_write+0x258/0x370 vfs_write+0x33f/0x510 ksys_write+0xc9/0x160 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae lockdep_is_held() can return -1 when lockdep is disabled which triggers this warning. Let's use lockdep_assert_not_held() which can detect incorrect calls while holding a lock and it also avoids false negatives when lockdep is disabled. Signed-off-by: Wanpeng Li Message-Id: <1644920142-81249-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini --- virt/kvm/kvm_main.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 58d31da8a2f7c2..0afc016cc54d4c 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -5528,9 +5528,7 @@ static int kvm_suspend(void) static void kvm_resume(void) { if (kvm_usage_count) { -#ifdef CONFIG_LOCKDEP - WARN_ON(lockdep_is_held(&kvm_count_lock)); -#endif + lockdep_assert_not_held(&kvm_count_lock); hardware_enable_nolock(NULL); } } From 3a55f729240a686aa8af00af436306c0cd532522 Mon Sep 17 00:00:00 2001 From: Anton Romanov Date: Wed, 16 Feb 2022 18:26:54 +0000 Subject: [PATCH 255/493] kvm: x86: Disable KVM_HC_CLOCK_PAIRING if tsc is in always catchup mode If vcpu has tsc_always_catchup set each request updates pvclock data. KVM_HC_CLOCK_PAIRING consumers such as ptp_kvm_x86 rely on tsc read on host's side and do hypercall inside pvclock_read_retry loop leading to infinite loop in such situation. v3: Removed warn Changed return code to KVM_EFAULT v2: Added warn Signed-off-by: Anton Romanov Message-Id: <20220216182653.506850-1-romanton@google.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index b8bd8da320456c..3471efe47e5fff 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -8943,6 +8943,13 @@ static int kvm_pv_clock_pairing(struct kvm_vcpu *vcpu, gpa_t paddr, if (clock_type != KVM_CLOCK_PAIRING_WALLCLOCK) return -KVM_EOPNOTSUPP; + /* + * When tsc is in permanent catchup mode guests won't be able to use + * pvclock_read_retry loop to get consistent view of pvclock + */ + if (vcpu->arch.tsc_always_catchup) + return -KVM_EOPNOTSUPP; + if (!kvm_get_walltime_and_clockread(&ts, &cycle)) return -KVM_EOPNOTSUPP; From cc8f7fe1f5eab010191aa4570f27641876fa1267 Mon Sep 17 00:00:00 2001 From: Haimin Zhang Date: Wed, 16 Feb 2022 16:40:38 +0800 Subject: [PATCH 256/493] block-map: add __GFP_ZERO flag for alloc_page in function bio_copy_kern Add __GFP_ZERO flag for alloc_page in function bio_copy_kern to initialize the buffer of a bio. Signed-off-by: Haimin Zhang Reviewed-by: Chaitanya Kulkarni Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/r/20220216084038.15635-1-tcs.kernel@gmail.com Signed-off-by: Jens Axboe --- block/blk-map.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/blk-map.c b/block/blk-map.c index 4526adde01564c..c7f71d83eff189 100644 --- a/block/blk-map.c +++ b/block/blk-map.c @@ -446,7 +446,7 @@ static struct bio *bio_copy_kern(struct request_queue *q, void *data, if (bytes > len) bytes = len; - page = alloc_page(GFP_NOIO | gfp_mask); + page = alloc_page(GFP_NOIO | __GFP_ZERO | gfp_mask); if (!page) goto cleanup; From 7a5428dcb7902700b830e912feee4e845df7c019 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 17 Feb 2022 08:52:31 +0100 Subject: [PATCH 257/493] block: fix surprise removal for drivers calling blk_set_queue_dying MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Various block drivers call blk_set_queue_dying to mark a disk as dead due to surprise removal events, but since commit 8e141f9eb803 that doesn't work given that the GD_DEAD flag needs to be set to stop I/O. Replace the driver calls to blk_set_queue_dying with a new (and properly documented) blk_mark_disk_dead API, and fold blk_set_queue_dying into the only remaining caller. Fixes: 8e141f9eb803 ("block: drain file system I/O on del_gendisk") Reported-by: Markus Blöchl Signed-off-by: Christoph Hellwig Reviewed-by: Sagi Grimberg Link: https://lore.kernel.org/r/20220217075231.1140-1-hch@lst.de Signed-off-by: Jens Axboe --- block/blk-core.c | 10 ++-------- block/genhd.c | 14 ++++++++++++++ drivers/block/mtip32xx/mtip32xx.c | 2 +- drivers/block/rbd.c | 2 +- drivers/block/xen-blkfront.c | 2 +- drivers/md/dm.c | 2 +- drivers/nvme/host/core.c | 2 +- drivers/nvme/host/multipath.c | 2 +- include/linux/blkdev.h | 3 ++- 9 files changed, 24 insertions(+), 15 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index d93e3bb9a769b4..1039515c99d6ab 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -284,13 +284,6 @@ void blk_queue_start_drain(struct request_queue *q) wake_up_all(&q->mq_freeze_wq); } -void blk_set_queue_dying(struct request_queue *q) -{ - blk_queue_flag_set(QUEUE_FLAG_DYING, q); - blk_queue_start_drain(q); -} -EXPORT_SYMBOL_GPL(blk_set_queue_dying); - /** * blk_cleanup_queue - shutdown a request queue * @q: request queue to shutdown @@ -308,7 +301,8 @@ void blk_cleanup_queue(struct request_queue *q) WARN_ON_ONCE(blk_queue_registered(q)); /* mark @q DYING, no new request or merges will be allowed afterwards */ - blk_set_queue_dying(q); + blk_queue_flag_set(QUEUE_FLAG_DYING, q); + blk_queue_start_drain(q); blk_queue_flag_set(QUEUE_FLAG_NOMERGES, q); blk_queue_flag_set(QUEUE_FLAG_NOXMERGES, q); diff --git a/block/genhd.c b/block/genhd.c index 626c8406f21a6a..9eca1f7d35c971 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -548,6 +548,20 @@ int __must_check device_add_disk(struct device *parent, struct gendisk *disk, } EXPORT_SYMBOL(device_add_disk); +/** + * blk_mark_disk_dead - mark a disk as dead + * @disk: disk to mark as dead + * + * Mark as disk as dead (e.g. surprise removed) and don't accept any new I/O + * to this disk. + */ +void blk_mark_disk_dead(struct gendisk *disk) +{ + set_bit(GD_DEAD, &disk->state); + blk_queue_start_drain(disk->queue); +} +EXPORT_SYMBOL_GPL(blk_mark_disk_dead); + /** * del_gendisk - remove the gendisk * @disk: the struct gendisk to remove diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index e6005c2323281d..2b588b62cbbb27 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -4112,7 +4112,7 @@ static void mtip_pci_remove(struct pci_dev *pdev) "Completion workers still active!\n"); } - blk_set_queue_dying(dd->queue); + blk_mark_disk_dead(dd->disk); set_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag); /* Clean up the block layer. */ diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 4203cdab8abfdd..b844432bad20b4 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -7185,7 +7185,7 @@ static ssize_t do_rbd_remove(struct bus_type *bus, * IO to complete/fail. */ blk_mq_freeze_queue(rbd_dev->disk->queue); - blk_set_queue_dying(rbd_dev->disk->queue); + blk_mark_disk_dead(rbd_dev->disk); } del_gendisk(rbd_dev->disk); diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index ccd0dd0c6b83c5..ca71a0585333fb 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -2126,7 +2126,7 @@ static void blkfront_closing(struct blkfront_info *info) /* No more blkif_request(). */ blk_mq_stop_hw_queues(info->rq); - blk_set_queue_dying(info->rq); + blk_mark_disk_dead(info->gd); set_capacity(info->gd, 0); for_each_rinfo(info, rinfo, i) { diff --git a/drivers/md/dm.c b/drivers/md/dm.c index dcbd6d201619d0..997ace47bbd544 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -2077,7 +2077,7 @@ static void __dm_destroy(struct mapped_device *md, bool wait) set_bit(DMF_FREEING, &md->flags); spin_unlock(&_minor_lock); - blk_set_queue_dying(md->queue); + blk_mark_disk_dead(md->disk); /* * Take suspend_lock so that presuspend and postsuspend methods diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 79005ea1a33e38..469f23186159c2 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -4574,7 +4574,7 @@ static void nvme_set_queue_dying(struct nvme_ns *ns) if (test_and_set_bit(NVME_NS_DEAD, &ns->flags)) return; - blk_set_queue_dying(ns->queue); + blk_mark_disk_dead(ns->disk); nvme_start_ns_queue(ns); set_capacity_and_notify(ns->disk, 0); diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c index f8bf6606eb2fca..ff775235534cf8 100644 --- a/drivers/nvme/host/multipath.c +++ b/drivers/nvme/host/multipath.c @@ -848,7 +848,7 @@ void nvme_mpath_remove_disk(struct nvme_ns_head *head) { if (!head->disk) return; - blk_set_queue_dying(head->disk->queue); + blk_mark_disk_dead(head->disk); /* make sure all pending bios are cleaned up */ kblockd_schedule_work(&head->requeue_work); flush_work(&head->requeue_work); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index f35aea98bc3510..16b47035e4b062 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -748,7 +748,8 @@ extern bool blk_queue_can_use_dma_map_merging(struct request_queue *q, bool __must_check blk_get_queue(struct request_queue *); extern void blk_put_queue(struct request_queue *); -extern void blk_set_queue_dying(struct request_queue *); + +void blk_mark_disk_dead(struct gendisk *disk); #ifdef CONFIG_BLOCK /* From e92bc4cd34de2ce454bdea8cd198b8067ee4e123 Mon Sep 17 00:00:00 2001 From: Laibin Qiu Date: Sat, 22 Jan 2022 19:10:45 +0800 Subject: [PATCH 258/493] block/wbt: fix negative inflight counter when remove scsi device Now that we disable wbt by set WBT_STATE_OFF_DEFAULT in wbt_disable_default() when switch elevator to bfq. And when we remove scsi device, wbt will be enabled by wbt_enable_default. If it become false positive between wbt_wait() and wbt_track() when submit write request. The following is the scenario that triggered the problem. T1 T2 T3 elevator_switch_mq bfq_init_queue wbt_disable_default <= Set rwb->enable_state (OFF) Submit_bio blk_mq_make_request rq_qos_throttle <= rwb->enable_state (OFF) scsi_remove_device sd_remove del_gendisk blk_unregister_queue elv_unregister_queue wbt_enable_default <= Set rwb->enable_state (ON) q_qos_track <= rwb->enable_state (ON) ^^^^^^ this request will mark WBT_TRACKED without inflight add and will lead to drop rqw->inflight to -1 in wbt_done() which will trigger IO hung. Fix this by move wbt_enable_default() from elv_unregister to bfq_exit_queue(). Only re-enable wbt when bfq exit. Fixes: 76a8040817b4b ("blk-wbt: make sure throttle is enabled properly") Remove oneline stale comment, and kill one oneshot local variable. Signed-off-by: Ming Lei Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/linux-block/20211214133103.551813-1-qiulaibin@huawei.com/ Signed-off-by: Laibin Qiu Signed-off-by: Jens Axboe --- block/bfq-iosched.c | 2 ++ block/elevator.c | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c index 0c612a9116967e..36a66e97e3c28f 100644 --- a/block/bfq-iosched.c +++ b/block/bfq-iosched.c @@ -7018,6 +7018,8 @@ static void bfq_exit_queue(struct elevator_queue *e) spin_unlock_irq(&bfqd->lock); #endif + wbt_enable_default(bfqd->queue); + kfree(bfqd); } diff --git a/block/elevator.c b/block/elevator.c index ec98aed39c4f5b..482df2a350fc32 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -525,8 +525,6 @@ void elv_unregister_queue(struct request_queue *q) kobject_del(&e->kobj); e->registered = 0; - /* Re-enable throttling in case elevator disabled it */ - wbt_enable_default(q); } } From 35a79e64de29e8d57a5989aac57611c0cd29e13e Mon Sep 17 00:00:00 2001 From: Xin Long Date: Wed, 16 Feb 2022 00:20:52 -0500 Subject: [PATCH 259/493] ping: fix the dif and sdif check in ping_lookup When 'ping' changes to use PING socket instead of RAW socket by: # sysctl -w net.ipv4.ping_group_range="0 100" There is another regression caused when matching sk_bound_dev_if and dif, RAW socket is using inet_iif() while PING socket lookup is using skb->dev->ifindex, the cmd below fails due to this: # ip link add dummy0 type dummy # ip link set dummy0 up # ip addr add 192.168.111.1/24 dev dummy0 # ping -I dummy0 192.168.111.1 -c1 The issue was also reported on: https://github.com/iputils/iputils/issues/104 But fixed in iputils in a wrong way by not binding to device when destination IP is on device, and it will cause some of kselftests to fail, as Jianlin noticed. This patch is to use inet(6)_iif and inet(6)_sdif to get dif and sdif for PING socket, and keep consistent with RAW socket. Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind") Reported-by: Jianlin Shi Signed-off-by: Xin Long Signed-off-by: David S. Miller --- net/ipv4/ping.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c index bcf7bc71cb56c8..3a5994b50571f0 100644 --- a/net/ipv4/ping.c +++ b/net/ipv4/ping.c @@ -172,16 +172,23 @@ static struct sock *ping_lookup(struct net *net, struct sk_buff *skb, u16 ident) struct sock *sk = NULL; struct inet_sock *isk; struct hlist_nulls_node *hnode; - int dif = skb->dev->ifindex; + int dif, sdif; if (skb->protocol == htons(ETH_P_IP)) { + dif = inet_iif(skb); + sdif = inet_sdif(skb); pr_debug("try to find: num = %d, daddr = %pI4, dif = %d\n", (int)ident, &ip_hdr(skb)->daddr, dif); #if IS_ENABLED(CONFIG_IPV6) } else if (skb->protocol == htons(ETH_P_IPV6)) { + dif = inet6_iif(skb); + sdif = inet6_sdif(skb); pr_debug("try to find: num = %d, daddr = %pI6c, dif = %d\n", (int)ident, &ipv6_hdr(skb)->daddr, dif); #endif + } else { + pr_err("ping: protocol(%x) is not supported\n", ntohs(skb->protocol)); + return NULL; } read_lock_bh(&ping_table.lock); @@ -221,7 +228,7 @@ static struct sock *ping_lookup(struct net *net, struct sk_buff *skb, u16 ident) } if (sk->sk_bound_dev_if && sk->sk_bound_dev_if != dif && - sk->sk_bound_dev_if != inet_sdif(skb)) + sk->sk_bound_dev_if != sdif) continue; sock_hold(sk); From aba2081e0a9c977396124aa6df93b55ed5912b19 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 15 Feb 2022 11:22:04 -0700 Subject: [PATCH 260/493] tps6598x: clear int mask on probe failure The interrupt mask is enabled before any potential failure points in the driver, which can leave a failure path where we exit with interrupts enabled but the device not live. This causes an infinite stream of interrupts on an Apple M1 Pro laptop on USB-C. Add a failure label that's used post enabling interrupts, where we mask them again before returning an error. Suggested-by: Sven Peter Cc: stable Reviewed-by: Heikki Krogerus Signed-off-by: Jens Axboe Link: https://lore.kernel.org/r/e6b80669-20f3-06e7-9ed5-8951a9c6db6f@kernel.dk Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tipd/core.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c index 6d27a5b5e3cac6..7ffcda94d323af 100644 --- a/drivers/usb/typec/tipd/core.c +++ b/drivers/usb/typec/tipd/core.c @@ -761,12 +761,12 @@ static int tps6598x_probe(struct i2c_client *client) ret = tps6598x_read32(tps, TPS_REG_STATUS, &status); if (ret < 0) - return ret; + goto err_clear_mask; trace_tps6598x_status(status); ret = tps6598x_read32(tps, TPS_REG_SYSTEM_CONF, &conf); if (ret < 0) - return ret; + goto err_clear_mask; /* * This fwnode has a "compatible" property, but is never populated as a @@ -855,7 +855,8 @@ static int tps6598x_probe(struct i2c_client *client) usb_role_switch_put(tps->role_sw); err_fwnode_put: fwnode_handle_put(fwnode); - +err_clear_mask: + tps6598x_write64(tps, TPS_REG_INT_MASK1, 0); return ret; } From ad856280ddea3401e1f5060ef20e6de9f6122c76 Mon Sep 17 00:00:00 2001 From: Leonardo Bras Date: Thu, 17 Feb 2022 02:30:29 -0300 Subject: [PATCH 261/493] x86/kvm/fpu: Limit guest user_xfeatures to supported bits of XCR0 During host/guest switch (like in kvm_arch_vcpu_ioctl_run()), the kernel swaps the fpu between host/guest contexts, by using fpu_swap_kvm_fpstate(). When xsave feature is available, the fpu swap is done by: - xsave(s) instruction, with guest's fpstate->xfeatures as mask, is used to store the current state of the fpu registers to a buffer. - xrstor(s) instruction, with (fpu_kernel_cfg.max_features & XFEATURE_MASK_FPSTATE) as mask, is used to put the buffer into fpu regs. For xsave(s) the mask is used to limit what parts of the fpu regs will be copied to the buffer. Likewise on xrstor(s), the mask is used to limit what parts of the fpu regs will be changed. The mask for xsave(s), the guest's fpstate->xfeatures, is defined on kvm_arch_vcpu_create(), which (in summary) sets it to all features supported by the cpu which are enabled on kernel config. This means that xsave(s) will save to guest buffer all the fpu regs contents the cpu has enabled when the guest is paused, even if they are not used. This would not be an issue, if xrstor(s) would also do that. xrstor(s)'s mask for host/guest swap is basically every valid feature contained in kernel config, except XFEATURE_MASK_PKRU. Accordingto kernel src, it is instead switched in switch_to() and flush_thread(). Then, the following happens with a host supporting PKRU starts a guest that does not support it: 1 - Host has XFEATURE_MASK_PKRU set. 1st switch to guest, 2 - xsave(s) fpu regs to host fpustate (buffer has XFEATURE_MASK_PKRU) 3 - xrstor(s) guest fpustate to fpu regs (fpu regs have XFEATURE_MASK_PKRU) 4 - guest runs, then switch back to host, 5 - xsave(s) fpu regs to guest fpstate (buffer now have XFEATURE_MASK_PKRU) 6 - xrstor(s) host fpstate to fpu regs. 7 - kvm_vcpu_ioctl_x86_get_xsave() copy guest fpstate to userspace (with XFEATURE_MASK_PKRU, which should not be supported by guest vcpu) On 5, even though the guest does not support PKRU, it does have the flag set on guest fpstate, which is transferred to userspace via vcpu ioctl KVM_GET_XSAVE. This becomes a problem when the user decides on migrating the above guest to another machine that does not support PKRU: the new host restores guest's fpu regs to as they were before (xrstor(s)), but since the new host don't support PKRU, a general-protection exception ocurs in xrstor(s) and that crashes the guest. This can be solved by making the guest's fpstate->user_xfeatures hold a copy of guest_supported_xcr0. This way, on 7 the only flags copied to userspace will be the ones compatible to guest requirements, and thus there will be no issue during migration. As a bonus, it will also fail if userspace tries to set fpu features (with the KVM_SET_XSAVE ioctl) that are not compatible to the guest configuration. Such features will never be returned by KVM_GET_XSAVE or KVM_GET_XSAVE2. Also, since kvm_vcpu_after_set_cpuid() now sets fpstate->user_xfeatures, there is not need to set it in kvm_check_cpuid(). So, change fpstate_realloc() so it does not touch fpstate->user_xfeatures if a non-NULL guest_fpu is passed, which is the case when kvm_check_cpuid() calls it. Signed-off-by: Leonardo Bras Message-Id: <20220217053028.96432-2-leobras@redhat.com> Signed-off-by: Paolo Bonzini --- arch/x86/kernel/fpu/xstate.c | 5 ++++- arch/x86/kvm/cpuid.c | 2 ++ 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c index 02b3ddaf4f75b5..7c7824ae78622d 100644 --- a/arch/x86/kernel/fpu/xstate.c +++ b/arch/x86/kernel/fpu/xstate.c @@ -1558,7 +1558,10 @@ static int fpstate_realloc(u64 xfeatures, unsigned int ksize, fpregs_restore_userregs(); newfps->xfeatures = curfps->xfeatures | xfeatures; - newfps->user_xfeatures = curfps->user_xfeatures | xfeatures; + + if (!guest_fpu) + newfps->user_xfeatures = curfps->user_xfeatures | xfeatures; + newfps->xfd = curfps->xfd & ~xfeatures; /* Do the final updates within the locked region */ diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c index 494d4d3518597f..71125291c57874 100644 --- a/arch/x86/kvm/cpuid.c +++ b/arch/x86/kvm/cpuid.c @@ -296,6 +296,8 @@ static void kvm_vcpu_after_set_cpuid(struct kvm_vcpu *vcpu) vcpu->arch.guest_supported_xcr0 = cpuid_get_supported_xcr0(vcpu->arch.cpuid_entries, vcpu->arch.cpuid_nent); + vcpu->arch.guest_fpu.fpstate->user_xfeatures = vcpu->arch.guest_supported_xcr0; + kvm_update_pv_runtime(vcpu); vcpu->arch.maxphyaddr = cpuid_query_maxphyaddr(vcpu); From 988896bb61827345c6d074dd5f2af1b7b008193f Mon Sep 17 00:00:00 2001 From: Leonardo Bras Date: Thu, 17 Feb 2022 02:30:30 -0300 Subject: [PATCH 262/493] x86/kvm/fpu: Remove kvm_vcpu_arch.guest_supported_xcr0 kvm_vcpu_arch currently contains the guest supported features in both guest_supported_xcr0 and guest_fpu.fpstate->user_xfeatures field. Currently both fields are set to the same value in kvm_vcpu_after_set_cpuid() and are not changed anywhere else after that. Since it's not good to keep duplicated data, remove guest_supported_xcr0. To keep the code more readable, introduce kvm_guest_supported_xcr() and kvm_guest_supported_xfd() to replace the previous usages of guest_supported_xcr0. Signed-off-by: Leonardo Bras Message-Id: <20220217053028.96432-3-leobras@redhat.com> Signed-off-by: Paolo Bonzini --- arch/x86/include/asm/kvm_host.h | 1 - arch/x86/kvm/cpuid.c | 5 +++-- arch/x86/kvm/x86.c | 18 +++++++++++++----- 3 files changed, 16 insertions(+), 8 deletions(-) diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index 6dcccb30477541..ec9830d2aabf88 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -703,7 +703,6 @@ struct kvm_vcpu_arch { struct fpu_guest guest_fpu; u64 xcr0; - u64 guest_supported_xcr0; struct kvm_pio_request pio; void *pio_data; diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c index 71125291c57874..b8f8d268d0585e 100644 --- a/arch/x86/kvm/cpuid.c +++ b/arch/x86/kvm/cpuid.c @@ -282,6 +282,7 @@ static void kvm_vcpu_after_set_cpuid(struct kvm_vcpu *vcpu) { struct kvm_lapic *apic = vcpu->arch.apic; struct kvm_cpuid_entry2 *best; + u64 guest_supported_xcr0; best = kvm_find_cpuid_entry(vcpu, 1, 0); if (best && apic) { @@ -293,10 +294,10 @@ static void kvm_vcpu_after_set_cpuid(struct kvm_vcpu *vcpu) kvm_apic_set_version(vcpu); } - vcpu->arch.guest_supported_xcr0 = + guest_supported_xcr0 = cpuid_get_supported_xcr0(vcpu->arch.cpuid_entries, vcpu->arch.cpuid_nent); - vcpu->arch.guest_fpu.fpstate->user_xfeatures = vcpu->arch.guest_supported_xcr0; + vcpu->arch.guest_fpu.fpstate->user_xfeatures = guest_supported_xcr0; kvm_update_pv_runtime(vcpu); diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 3471efe47e5fff..20ad6fe391bf8f 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -984,6 +984,16 @@ void kvm_load_host_xsave_state(struct kvm_vcpu *vcpu) } EXPORT_SYMBOL_GPL(kvm_load_host_xsave_state); +static inline u64 kvm_guest_supported_xcr0(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.guest_fpu.fpstate->user_xfeatures; +} + +static inline u64 kvm_guest_supported_xfd(struct kvm_vcpu *vcpu) +{ + return kvm_guest_supported_xcr0(vcpu) & XFEATURE_MASK_USER_DYNAMIC; +} + static int __kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr) { u64 xcr0 = xcr; @@ -1003,7 +1013,7 @@ static int __kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr) * saving. However, xcr0 bit 0 is always set, even if the * emulated CPU does not support XSAVE (see kvm_vcpu_reset()). */ - valid_bits = vcpu->arch.guest_supported_xcr0 | XFEATURE_MASK_FP; + valid_bits = kvm_guest_supported_xcr0(vcpu) | XFEATURE_MASK_FP; if (xcr0 & ~valid_bits) return 1; @@ -3706,8 +3716,7 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info) !guest_cpuid_has(vcpu, X86_FEATURE_XFD)) return 1; - if (data & ~(XFEATURE_MASK_USER_DYNAMIC & - vcpu->arch.guest_supported_xcr0)) + if (data & ~kvm_guest_supported_xfd(vcpu)) return 1; fpu_update_guest_xfd(&vcpu->arch.guest_fpu, data); @@ -3717,8 +3726,7 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info) !guest_cpuid_has(vcpu, X86_FEATURE_XFD)) return 1; - if (data & ~(XFEATURE_MASK_USER_DYNAMIC & - vcpu->arch.guest_supported_xcr0)) + if (data & ~kvm_guest_supported_xfd(vcpu)) return 1; vcpu->arch.guest_fpu.xfd_err = data; From c16bdeb5a39ffa3f32b32f812831a2092d2a3061 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Fri, 11 Feb 2022 13:57:44 -0600 Subject: [PATCH 263/493] rlimit: Fix RLIMIT_NPROC enforcement failure caused by capability calls in set_user Solar Designer wrote: > I'm not aware of anyone actually running into this issue and reporting > it. The systems that I personally know use suexec along with rlimits > still run older/distro kernels, so would not yet be affected. > > So my mention was based on my understanding of how suexec works, and > code review. Specifically, Apache httpd has the setting RLimitNPROC, > which makes it set RLIMIT_NPROC: > > https://httpd.apache.org/docs/2.4/mod/core.html#rlimitnproc > > The above documentation for it includes: > > "This applies to processes forked from Apache httpd children servicing > requests, not the Apache httpd children themselves. This includes CGI > scripts and SSI exec commands, but not any processes forked from the > Apache httpd parent, such as piped logs." > > In code, there are: > > ./modules/generators/mod_cgid.c: ( (cgid_req.limits.limit_nproc_set) && ((rc = apr_procattr_limit_set(procattr, APR_LIMIT_NPROC, > ./modules/generators/mod_cgi.c: ((rc = apr_procattr_limit_set(procattr, APR_LIMIT_NPROC, > ./modules/filters/mod_ext_filter.c: rv = apr_procattr_limit_set(procattr, APR_LIMIT_NPROC, conf->limit_nproc); > > For example, in mod_cgi.c this is in run_cgi_child(). > > I think this means an httpd child sets RLIMIT_NPROC shortly before it > execs suexec, which is a SUID root program. suexec then switches to the > target user and execs the CGI script. > > Before 2863643fb8b9, the setuid() in suexec would set the flag, and the > target user's process count would be checked against RLIMIT_NPROC on > execve(). After 2863643fb8b9, the setuid() in suexec wouldn't set the > flag because setuid() is (naturally) called when the process is still > running as root (thus, has those limits bypass capabilities), and > accordingly execve() would not check the target user's process count > against RLIMIT_NPROC. In commit 2863643fb8b9 ("set_user: add capability check when rlimit(RLIMIT_NPROC) exceeds") capable calls were added to set_user to make it more consistent with fork. Unfortunately because of call site differences those capable calls were checking the credentials of the user before set*id() instead of after set*id(). This breaks enforcement of RLIMIT_NPROC for applications that set the rlimit and then call set*id() while holding a full set of capabilities. The capabilities are only changed in the new credential in security_task_fix_setuid(). The code in apache suexec appears to follow this pattern. Commit 909cc4ae86f3 ("[PATCH] Fix two bugs with process limits (RLIMIT_NPROC)") where this check was added describes the targes of this capability check as: 2/ When a root-owned process (e.g. cgiwrap) sets up process limits and then calls setuid, the setuid should fail if the user would then be running more than rlim_cur[RLIMIT_NPROC] processes, but it doesn't. This patch adds an appropriate test. With this patch, and per-user process limit imposed in cgiwrap really works. So the original use case of this check also appears to match the broken pattern. Restore the enforcement of RLIMIT_NPROC by removing the bad capable checks added in set_user. This unfortunately restores the inconsistent state the code has been in for the last 11 years, but dealing with the inconsistencies looks like a larger problem. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20210907213042.GA22626@openwall.com/ Link: https://lkml.kernel.org/r/20220212221412.GA29214@openwall.com Link: https://lkml.kernel.org/r/20220216155832.680775-1-ebiederm@xmission.com Fixes: 2863643fb8b9 ("set_user: add capability check when rlimit(RLIMIT_NPROC) exceeds") History-Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Reviewed-by: Solar Designer Signed-off-by: "Eric W. Biederman" --- kernel/sys.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/kernel/sys.c b/kernel/sys.c index ecc4cf019242eb..8dd938a3d2bff7 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -480,8 +480,7 @@ static int set_user(struct cred *new) * failure to the execve() stage. */ if (is_ucounts_overlimit(new->ucounts, UCOUNT_RLIMIT_NPROC, rlimit(RLIMIT_NPROC)) && - new_user != INIT_USER && - !capable(CAP_SYS_RESOURCE) && !capable(CAP_SYS_ADMIN)) + new_user != INIT_USER) current->flags |= PF_NPROC_EXCEEDED; else current->flags &= ~PF_NPROC_EXCEEDED; From 62e3f0afe246720f7646eb1b034a6897dac34405 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 13 Feb 2022 14:05:17 +0100 Subject: [PATCH 264/493] usb: dwc3: pci: Fix Bay Trail phy GPIO mappings When the Bay Trail phy GPIO mappings where added cs and reset were swapped, this did not cause any issues sofar, because sofar they were always driven high/low at the same time. Note the new mapping has been verified both in /sys/kernel/debug/gpio output on Android factory images on multiple devices, as well as in the schematics for some devices. Fixes: 5741022cbdf3 ("usb: dwc3: pci: Add GPIO lookup table on platforms without ACPI GPIO resources") Cc: stable Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20220213130524.18748-3-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/dwc3-pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 18ab49b8e66eb1..06d0e88ec8af96 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -86,8 +86,8 @@ static const struct acpi_gpio_mapping acpi_dwc3_byt_gpios[] = { static struct gpiod_lookup_table platform_bytcr_gpios = { .dev_id = "0000:00:16.0", .table = { - GPIO_LOOKUP("INT33FC:00", 54, "reset", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("INT33FC:02", 14, "cs", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("INT33FC:00", 54, "cs", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("INT33FC:02", 14, "reset", GPIO_ACTIVE_HIGH), {} }, }; From 32fde84362c40961726a5c91f35ad37355ccc0c6 Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Wed, 16 Feb 2022 09:12:15 +0100 Subject: [PATCH 265/493] usb: dwc2: drd: fix soft connect when gadget is unconfigured When the gadget driver hasn't been (yet) configured, and the cable is connected to a HOST, the SFTDISCON gets cleared unconditionally, so the HOST tries to enumerate it. At the host side, this can result in a stuck USB port or worse. When getting lucky, some dmesg can be observed at the host side: new high-speed USB device number ... device descriptor read/64, error -110 Fix it in drd, by checking the enabled flag before calling dwc2_hsotg_core_connect(). It will be called later, once configured, by the normal flow: - udc_bind_to_driver - usb_gadget_connect - dwc2_hsotg_pullup - dwc2_hsotg_core_connect Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support") Cc: stable Signed-off-by: Fabrice Gasnier Link: https://lore.kernel.org/r/1644999135-13478-1-git-send-email-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/core.h | 2 ++ drivers/usb/dwc2/drd.c | 6 ++++-- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index 8a63da3ab39d65..88c337bf564ff0 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -1418,6 +1418,7 @@ void dwc2_hsotg_core_connect(struct dwc2_hsotg *hsotg); void dwc2_hsotg_disconnect(struct dwc2_hsotg *dwc2); int dwc2_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode); #define dwc2_is_device_connected(hsotg) (hsotg->connected) +#define dwc2_is_device_enabled(hsotg) (hsotg->enabled) int dwc2_backup_device_registers(struct dwc2_hsotg *hsotg); int dwc2_restore_device_registers(struct dwc2_hsotg *hsotg, int remote_wakeup); int dwc2_gadget_enter_hibernation(struct dwc2_hsotg *hsotg); @@ -1454,6 +1455,7 @@ static inline int dwc2_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode) { return 0; } #define dwc2_is_device_connected(hsotg) (0) +#define dwc2_is_device_enabled(hsotg) (0) static inline int dwc2_backup_device_registers(struct dwc2_hsotg *hsotg) { return 0; } static inline int dwc2_restore_device_registers(struct dwc2_hsotg *hsotg, diff --git a/drivers/usb/dwc2/drd.c b/drivers/usb/dwc2/drd.c index 1b39c4776369b4..d8d6493bc4576b 100644 --- a/drivers/usb/dwc2/drd.c +++ b/drivers/usb/dwc2/drd.c @@ -130,8 +130,10 @@ static int dwc2_drd_role_sw_set(struct usb_role_switch *sw, enum usb_role role) already = dwc2_ovr_avalid(hsotg, true); } else if (role == USB_ROLE_DEVICE) { already = dwc2_ovr_bvalid(hsotg, true); - /* This clear DCTL.SFTDISCON bit */ - dwc2_hsotg_core_connect(hsotg); + if (dwc2_is_device_enabled(hsotg)) { + /* This clear DCTL.SFTDISCON bit */ + dwc2_hsotg_core_connect(hsotg); + } } else { if (dwc2_is_device_mode(hsotg)) { if (!dwc2_ovr_bvalid(hsotg, false)) From 8f2f9c4d82f24f172ae439e5035fc1e0e4c229dd Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 9 Feb 2022 20:03:19 -0600 Subject: [PATCH 266/493] ucounts: Enforce RLIMIT_NPROC not RLIMIT_NPROC+1 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Michal Koutný wrote: > It was reported that v5.14 behaves differently when enforcing > RLIMIT_NPROC limit, namely, it allows one more task than previously. > This is consequence of the commit 21d1c5e386bc ("Reimplement > RLIMIT_NPROC on top of ucounts") that missed the sharpness of > equality in the forking path. This can be fixed either by fixing the test or by moving the increment to be before the test. Fix it my moving copy_creds which contains the increment before is_ucounts_overlimit. In the case of CLONE_NEWUSER the ucounts in the task_cred changes. The function is_ucounts_overlimit needs to use the final version of the ucounts for the new process. Which means moving the is_ucounts_overlimit test after copy_creds is necessary. Both the test in fork and the test in set_user were semantically changed when the code moved to ucounts. The change of the test in fork was bad because it was before the increment. The test in set_user was wrong and the change to ucounts fixed it. So this fix only restores the old behavior in one lcation not two. Link: https://lkml.kernel.org/r/20220204181144.24462-1-mkoutny@suse.com Link: https://lkml.kernel.org/r/20220216155832.680775-2-ebiederm@xmission.com Cc: stable@vger.kernel.org Reported-by: Michal Koutný Reviewed-by: Michal Koutný Fixes: 21d1c5e386bc ("Reimplement RLIMIT_NPROC on top of ucounts") Signed-off-by: "Eric W. Biederman" --- kernel/fork.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/kernel/fork.c b/kernel/fork.c index d75a528f7b2196..17d8a8c85e3b93 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -2021,18 +2021,18 @@ static __latent_entropy struct task_struct *copy_process( #ifdef CONFIG_PROVE_LOCKING DEBUG_LOCKS_WARN_ON(!p->softirqs_enabled); #endif + retval = copy_creds(p, clone_flags); + if (retval < 0) + goto bad_fork_free; + retval = -EAGAIN; if (is_ucounts_overlimit(task_ucounts(p), UCOUNT_RLIMIT_NPROC, rlimit(RLIMIT_NPROC))) { if (p->real_cred->user != INIT_USER && !capable(CAP_SYS_RESOURCE) && !capable(CAP_SYS_ADMIN)) - goto bad_fork_free; + goto bad_fork_cleanup_count; } current->flags &= ~PF_NPROC_EXCEEDED; - retval = copy_creds(p, clone_flags); - if (retval < 0) - goto bad_fork_free; - /* * If multiple threads are within copy_process(), then this check * triggers too late. This doesn't hurt, the check is only there From a55d07294f1e9b576093bdfa95422f8119941e83 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 9 Feb 2022 16:22:20 -0600 Subject: [PATCH 267/493] ucounts: Base set_cred_ucounts changes on the real user MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Michal Koutný wrote: > Tasks are associated to multiple users at once. Historically and as per > setrlimit(2) RLIMIT_NPROC is enforce based on real user ID. > > The commit 21d1c5e386bc ("Reimplement RLIMIT_NPROC on top of ucounts") > made the accounting structure "indexed" by euid and hence potentially > account tasks differently. > > The effective user ID may be different e.g. for setuid programs but > those are exec'd into already existing task (i.e. below limit), so > different accounting is moot. > > Some special setresuid(2) users may notice the difference, justifying > this fix. I looked at cred->ucount and it is only used for rlimit operations that were previously stored in cred->user. Making the fact cred->ucount can refer to a different user from cred->user a bug, affecting all uses of cred->ulimit not just RLIMIT_NPROC. Fix set_cred_ucounts to always use the real uid not the effective uid. Further simplify set_cred_ucounts by noticing that set_cred_ucounts somehow retained a draft version of the check to see if alloc_ucounts was needed that checks the new->user and new->user_ns against the current_real_cred(). Remove that draft version of the check. All that matters for setting the cred->ucounts are the user_ns and uid fields in the cred. Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20220207121800.5079-4-mkoutny@suse.com Link: https://lkml.kernel.org/r/20220216155832.680775-3-ebiederm@xmission.com Reported-by: Michal Koutný Reviewed-by: Michal Koutný Fixes: 21d1c5e386bc ("Reimplement RLIMIT_NPROC on top of ucounts") Signed-off-by: "Eric W. Biederman" --- kernel/cred.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/kernel/cred.c b/kernel/cred.c index 473d17c431f3a8..933155c9692270 100644 --- a/kernel/cred.c +++ b/kernel/cred.c @@ -665,21 +665,16 @@ EXPORT_SYMBOL(cred_fscmp); int set_cred_ucounts(struct cred *new) { - struct task_struct *task = current; - const struct cred *old = task->real_cred; struct ucounts *new_ucounts, *old_ucounts = new->ucounts; - if (new->user == old->user && new->user_ns == old->user_ns) - return 0; - /* * This optimization is needed because alloc_ucounts() uses locks * for table lookups. */ - if (old_ucounts->ns == new->user_ns && uid_eq(old_ucounts->uid, new->euid)) + if (old_ucounts->ns == new->user_ns && uid_eq(old_ucounts->uid, new->uid)) return 0; - if (!(new_ucounts = alloc_ucounts(new->user_ns, new->euid))) + if (!(new_ucounts = alloc_ucounts(new->user_ns, new->uid))) return -EAGAIN; new->ucounts = new_ucounts; From c923a8e7edb010da67424077cbf1a6f1396ebd2e Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Mon, 14 Feb 2022 09:40:25 -0600 Subject: [PATCH 268/493] ucounts: Move RLIMIT_NPROC handling after set_user During set*id() which cred->ucounts to charge the the current process to is not known until after set_cred_ucounts. So move the RLIMIT_NPROC checking into a new helper flag_nproc_exceeded and call flag_nproc_exceeded after set_cred_ucounts. This is very much an arbitrary subset of the places where we currently change the RLIMIT_NPROC accounting, designed to preserve the existing logic. Fixing the existing logic will be the subject of another series of changes. Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20220216155832.680775-4-ebiederm@xmission.com Fixes: 21d1c5e386bc ("Reimplement RLIMIT_NPROC on top of ucounts") Signed-off-by: "Eric W. Biederman" --- kernel/sys.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/kernel/sys.c b/kernel/sys.c index 8dd938a3d2bff7..97dc9e5d6bf92c 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -472,6 +472,16 @@ static int set_user(struct cred *new) if (!new_user) return -EAGAIN; + free_uid(new->user); + new->user = new_user; + return 0; +} + +static void flag_nproc_exceeded(struct cred *new) +{ + if (new->ucounts == current_ucounts()) + return; + /* * We don't fail in case of NPROC limit excess here because too many * poorly written programs don't check set*uid() return code, assuming @@ -480,14 +490,10 @@ static int set_user(struct cred *new) * failure to the execve() stage. */ if (is_ucounts_overlimit(new->ucounts, UCOUNT_RLIMIT_NPROC, rlimit(RLIMIT_NPROC)) && - new_user != INIT_USER) + new->user != INIT_USER) current->flags |= PF_NPROC_EXCEEDED; else current->flags &= ~PF_NPROC_EXCEEDED; - - free_uid(new->user); - new->user = new_user; - return 0; } /* @@ -562,6 +568,7 @@ long __sys_setreuid(uid_t ruid, uid_t euid) if (retval < 0) goto error; + flag_nproc_exceeded(new); return commit_creds(new); error: @@ -624,6 +631,7 @@ long __sys_setuid(uid_t uid) if (retval < 0) goto error; + flag_nproc_exceeded(new); return commit_creds(new); error: @@ -703,6 +711,7 @@ long __sys_setresuid(uid_t ruid, uid_t euid, uid_t suid) if (retval < 0) goto error; + flag_nproc_exceeded(new); return commit_creds(new); error: From 0cbae9e24fa7d6c6e9f828562f084da82217a0c5 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 9 Feb 2022 18:09:41 -0600 Subject: [PATCH 269/493] ucounts: Handle wrapping in is_ucounts_overlimit While examining is_ucounts_overlimit and reading the various messages I realized that is_ucounts_overlimit fails to deal with counts that may have wrapped. Being wrapped should be a transitory state for counts and they should never be wrapped for long, but it can happen so handle it. Cc: stable@vger.kernel.org Fixes: 21d1c5e386bc ("Reimplement RLIMIT_NPROC on top of ucounts") Link: https://lkml.kernel.org/r/20220216155832.680775-5-ebiederm@xmission.com Reviewed-by: Shuah Khan Signed-off-by: "Eric W. Biederman" --- kernel/ucount.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/ucount.c b/kernel/ucount.c index 65b597431c861a..06ea04d4468522 100644 --- a/kernel/ucount.c +++ b/kernel/ucount.c @@ -350,7 +350,8 @@ bool is_ucounts_overlimit(struct ucounts *ucounts, enum ucount_type type, unsign if (rlimit > LONG_MAX) max = LONG_MAX; for (iter = ucounts; iter; iter = iter->ns->ucounts) { - if (get_ucounts_value(iter, type) > max) + long val = get_ucounts_value(iter, type); + if (val < 0 || val > max) return true; max = READ_ONCE(iter->ns->ucount_max[type]); } From d04ad245d67a3991dfea5e108e4c452c2ab39bac Mon Sep 17 00:00:00 2001 From: Prasad Kumpatla Date: Thu, 17 Feb 2022 14:20:07 +0530 Subject: [PATCH 270/493] regmap-irq: Update interrupt clear register for proper reset MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With the existing logic where clear_ack is true (HW doesn’t support auto clear for ICR), interrupt clear register reset is not handled properly. Due to this only the first interrupts get processed properly and further interrupts are blocked due to not resetting interrupt clear register. Example for issue case where Invert_ack is false and clear_ack is true: Say Default ISR=0x00 & ICR=0x00 and ISR is triggered with 2 interrupts making ISR = 0x11. Step 1: Say ISR is set 0x11 (store status_buff = ISR). ISR needs to be cleared with the help of ICR once the Interrupt is processed. Step 2: Write ICR = 0x11 (status_buff), this will clear the ISR to 0x00. Step 3: Issue - In the existing code, ICR is written with ICR = ~(status_buff) i.e ICR = 0xEE -> This will block all the interrupts from raising except for interrupts 0 and 4. So expectation here is to reset ICR, which will unblock all the interrupts. if (chip->clear_ack) { if (chip->ack_invert && !ret) ........ else if (!ret) ret = regmap_write(map, reg, ~data->status_buf[i]); So writing 0 and 0xff (when ack_invert is true) should have no effect, other than clearing the ACKs just set. Fixes: 3a6f0fb7b8eb ("regmap: irq: Add support to clear ack registers") Signed-off-by: Prasad Kumpatla Reviewed-by: Charles Keepax Tested-by: Marek Szyprowski Link: https://lore.kernel.org/r/20220217085007.30218-1-quic_pkumpatl@quicinc.com Signed-off-by: Mark Brown --- drivers/base/regmap/regmap-irq.c | 20 ++++++-------------- 1 file changed, 6 insertions(+), 14 deletions(-) diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c index d2656581a60853..4a446259a184e9 100644 --- a/drivers/base/regmap/regmap-irq.c +++ b/drivers/base/regmap/regmap-irq.c @@ -189,11 +189,9 @@ static void regmap_irq_sync_unlock(struct irq_data *data) ret = regmap_write(map, reg, d->mask_buf[i]); if (d->chip->clear_ack) { if (d->chip->ack_invert && !ret) - ret = regmap_write(map, reg, - d->mask_buf[i]); + ret = regmap_write(map, reg, UINT_MAX); else if (!ret) - ret = regmap_write(map, reg, - ~d->mask_buf[i]); + ret = regmap_write(map, reg, 0); } if (ret != 0) dev_err(d->map->dev, "Failed to ack 0x%x: %d\n", @@ -556,11 +554,9 @@ static irqreturn_t regmap_irq_thread(int irq, void *d) data->status_buf[i]); if (chip->clear_ack) { if (chip->ack_invert && !ret) - ret = regmap_write(map, reg, - data->status_buf[i]); + ret = regmap_write(map, reg, UINT_MAX); else if (!ret) - ret = regmap_write(map, reg, - ~data->status_buf[i]); + ret = regmap_write(map, reg, 0); } if (ret != 0) dev_err(map->dev, "Failed to ack 0x%x: %d\n", @@ -817,13 +813,9 @@ int regmap_add_irq_chip_fwnode(struct fwnode_handle *fwnode, d->status_buf[i] & d->mask_buf[i]); if (chip->clear_ack) { if (chip->ack_invert && !ret) - ret = regmap_write(map, reg, - (d->status_buf[i] & - d->mask_buf[i])); + ret = regmap_write(map, reg, UINT_MAX); else if (!ret) - ret = regmap_write(map, reg, - ~(d->status_buf[i] & - d->mask_buf[i])); + ret = regmap_write(map, reg, 0); } if (ret != 0) { dev_err(map->dev, "Failed to ack 0x%x: %d\n", From 9382df0a98aad5bbcd4d634790305a1d786ad224 Mon Sep 17 00:00:00 2001 From: Jon Lin Date: Wed, 16 Feb 2022 09:40:23 +0800 Subject: [PATCH 271/493] spi: rockchip: Fix error in getting num-cs property Get num-cs u32 from dts of_node property rather than u16. Signed-off-by: Jon Lin Link: https://lore.kernel.org/r/20220216014028.8123-2-jon.lin@rock-chips.com Signed-off-by: Mark Brown --- drivers/spi/spi-rockchip.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index 553b6b9d02222b..4f65ba3dd19c2c 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -654,7 +654,7 @@ static int rockchip_spi_probe(struct platform_device *pdev) struct spi_controller *ctlr; struct resource *mem; struct device_node *np = pdev->dev.of_node; - u32 rsd_nsecs; + u32 rsd_nsecs, num_cs; bool slave_mode; slave_mode = of_property_read_bool(np, "spi-slave"); @@ -764,8 +764,9 @@ static int rockchip_spi_probe(struct platform_device *pdev) * rk spi0 has two native cs, spi1..5 one cs only * if num-cs is missing in the dts, default to 1 */ - if (of_property_read_u16(np, "num-cs", &ctlr->num_chipselect)) - ctlr->num_chipselect = 1; + if (of_property_read_u32(np, "num-cs", &num_cs)) + num_cs = 1; + ctlr->num_chipselect = num_cs; ctlr->use_gpio_descriptors = true; } ctlr->dev.of_node = pdev->dev.of_node; From 80808768e41324d2e23de89972b5406c1020e6e4 Mon Sep 17 00:00:00 2001 From: Jon Lin Date: Wed, 16 Feb 2022 09:40:24 +0800 Subject: [PATCH 272/493] spi: rockchip: terminate dma transmission when slave abort After slave abort, all DMA should be stopped, or it will affect the next transmission and maybe abort again. Signed-off-by: Jon Lin Link: https://lore.kernel.org/r/20220216014028.8123-3-jon.lin@rock-chips.com Signed-off-by: Mark Brown --- drivers/spi/spi-rockchip.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index 4f65ba3dd19c2c..c6a1bb09be0566 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -585,6 +585,12 @@ static int rockchip_spi_slave_abort(struct spi_controller *ctlr) { struct rockchip_spi *rs = spi_controller_get_devdata(ctlr); + if (atomic_read(&rs->state) & RXDMA) + dmaengine_terminate_sync(ctlr->dma_rx); + if (atomic_read(&rs->state) & TXDMA) + dmaengine_terminate_sync(ctlr->dma_tx); + atomic_set(&rs->state, 0); + spi_enable_chip(rs, false); rs->slave_abort = true; spi_finalize_current_transfer(ctlr); From 32f57cb1b2c8d6f20aefec7052b1bfeb7e3b69d4 Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Thu, 17 Feb 2022 08:59:32 -0500 Subject: [PATCH 273/493] IB/qib: Fix duplicate sysfs directory name The qib driver load has been failing with the following message: sysfs: cannot create duplicate filename '/devices/pci0000:80/0000:80:02.0/0000:81:00.0/infiniband/qib0/ports/1/linkcontrol' The patch below has two "linkcontrol" names causing the duplication. Fix by using the correct "diag_counters" name on the second instance. Fixes: 4a7aaf88c89f ("RDMA/qib: Use attributes for the port sysfs") Link: https://lore.kernel.org/r/1645106372-23004-1-git-send-email-mike.marciniszyn@cornelisnetworks.com Cc: Reviewed-by: Dennis Dalessandro Signed-off-by: Mike Marciniszyn Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/qib/qib_sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/qib/qib_sysfs.c b/drivers/infiniband/hw/qib/qib_sysfs.c index 0a3b28142c05b6..41c272980f91cc 100644 --- a/drivers/infiniband/hw/qib/qib_sysfs.c +++ b/drivers/infiniband/hw/qib/qib_sysfs.c @@ -541,7 +541,7 @@ static struct attribute *port_diagc_attributes[] = { }; static const struct attribute_group port_diagc_group = { - .name = "linkcontrol", + .name = "diag_counters", .attrs = port_diagc_attributes, }; From e40945ab7c7f966d0c37b7bd7b0596497dfe228d Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 27 Jan 2022 12:14:52 +0100 Subject: [PATCH 274/493] drm/vc4: hdmi: Unregister codec device on unbind On bind we will register the HDMI codec device but we don't unregister it on unbind, leading to a device leakage. Unregister our device at unbind. Signed-off-by: Maxime Ripard Reviewed-by: Javier Martinez Canillas Link: https://patchwork.freedesktop.org/patch/msgid/20220127111452.222002-1-maxime@cerno.tech --- drivers/gpu/drm/vc4/vc4_hdmi.c | 8 ++++++++ drivers/gpu/drm/vc4/vc4_hdmi.h | 1 + 2 files changed, 9 insertions(+) diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c index b30500405fa79d..3a1626f261e5a0 100644 --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c @@ -1749,6 +1749,7 @@ static int vc4_hdmi_audio_init(struct vc4_hdmi *vc4_hdmi) dev_err(dev, "Couldn't register the HDMI codec: %ld\n", PTR_ERR(codec_pdev)); return PTR_ERR(codec_pdev); } + vc4_hdmi->audio.codec_pdev = codec_pdev; dai_link->cpus = &vc4_hdmi->audio.cpu; dai_link->codecs = &vc4_hdmi->audio.codec; @@ -1788,6 +1789,12 @@ static int vc4_hdmi_audio_init(struct vc4_hdmi *vc4_hdmi) } +static void vc4_hdmi_audio_exit(struct vc4_hdmi *vc4_hdmi) +{ + platform_device_unregister(vc4_hdmi->audio.codec_pdev); + vc4_hdmi->audio.codec_pdev = NULL; +} + static irqreturn_t vc4_hdmi_hpd_irq_thread(int irq, void *priv) { struct vc4_hdmi *vc4_hdmi = priv; @@ -2660,6 +2667,7 @@ static void vc4_hdmi_unbind(struct device *dev, struct device *master, kfree(vc4_hdmi->hdmi_regset.regs); kfree(vc4_hdmi->hd_regset.regs); + vc4_hdmi_audio_exit(vc4_hdmi); vc4_hdmi_cec_exit(vc4_hdmi); vc4_hdmi_hotplug_exit(vc4_hdmi); vc4_hdmi_connector_destroy(&vc4_hdmi->connector); diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h index 31b77a94c526de..6ffdd4ec5fb6af 100644 --- a/drivers/gpu/drm/vc4/vc4_hdmi.h +++ b/drivers/gpu/drm/vc4/vc4_hdmi.h @@ -116,6 +116,7 @@ struct vc4_hdmi_audio { struct snd_soc_dai_link_component platform; struct snd_dmaengine_dai_dma_data dma_data; struct hdmi_audio_infoframe infoframe; + struct platform_device *codec_pdev; bool streaming; }; From 6764eb690e77ecded48587d6d4e346ba2e196546 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 3 Feb 2022 11:20:03 +0100 Subject: [PATCH 275/493] drm/vc4: crtc: Fix runtime_pm reference counting At boot on the BCM2711, if the HDMI controllers are running, the CRTC driver will disable itself and its associated HDMI controller to work around a hardware bug that would leave some pixels stuck in a FIFO. In order to avoid that issue, we need to run some operations in lockstep between the CRTC and HDMI controller, and we need to make sure the HDMI controller will be powered properly. However, since we haven't enabled it through KMS, the runtime_pm state is off at this point so we need to make sure the device is powered through pm_runtime_resume_and_get, and once the operations are complete, we call pm_runtime_put. However, the HDMI controller will do that itself in its post_crtc_powerdown, which means we'll end up calling pm_runtime_put for a single pm_runtime_get, throwing the reference counting off. Let's remove the pm_runtime_put call in the CRTC code in order to have the proper counting. Fixes: bca10db67bda ("drm/vc4: crtc: Make sure the HDMI controller is powered when disabling") Signed-off-by: Maxime Ripard Reviewed-by: Javier Martinez Canillas Link: https://patchwork.freedesktop.org/patch/msgid/20220203102003.1114673-1-maxime@cerno.tech --- drivers/gpu/drm/vc4/vc4_crtc.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c index e6cc47470e0309..783890e8d43a2e 100644 --- a/drivers/gpu/drm/vc4/vc4_crtc.c +++ b/drivers/gpu/drm/vc4/vc4_crtc.c @@ -525,9 +525,11 @@ int vc4_crtc_disable_at_boot(struct drm_crtc *crtc) if (ret) return ret; - ret = pm_runtime_put(&vc4_hdmi->pdev->dev); - if (ret) - return ret; + /* + * post_crtc_powerdown will have called pm_runtime_put, so we + * don't need it here otherwise we'll get the reference counting + * wrong. + */ return 0; } From 6aba04ee3263669b335458c4cf4c7d97d6940229 Mon Sep 17 00:00:00 2001 From: Jonas Gorski Date: Wed, 16 Feb 2022 10:46:34 -0800 Subject: [PATCH 276/493] Revert "net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname" This reverts commit 3710e80952cf2dc48257ac9f145b117b5f74e0a5. Since idm_base and nicpm_base are still optional resources not present on all platforms, this breaks the driver for everything except Northstar 2 (which has both). The same change was already reverted once with 755f5738ff98 ("net: broadcom: fix a mistake about ioremap resource"). So let's do it again. Fixes: 3710e80952cf ("net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname") Signed-off-by: Jonas Gorski [florian: Added comments to explain the resources are optional] Signed-off-by: Florian Fainelli Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20220216184634.2032460-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski --- .../net/ethernet/broadcom/bgmac-platform.c | 23 +++++++++++++------ 1 file changed, 16 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bgmac-platform.c b/drivers/net/ethernet/broadcom/bgmac-platform.c index c6412c523637b9..b4381cd4197928 100644 --- a/drivers/net/ethernet/broadcom/bgmac-platform.c +++ b/drivers/net/ethernet/broadcom/bgmac-platform.c @@ -172,6 +172,7 @@ static int bgmac_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; struct bgmac *bgmac; + struct resource *regs; int ret; bgmac = bgmac_alloc(&pdev->dev); @@ -208,15 +209,23 @@ static int bgmac_probe(struct platform_device *pdev) if (IS_ERR(bgmac->plat.base)) return PTR_ERR(bgmac->plat.base); - bgmac->plat.idm_base = devm_platform_ioremap_resource_byname(pdev, "idm_base"); - if (IS_ERR(bgmac->plat.idm_base)) - return PTR_ERR(bgmac->plat.idm_base); - else + /* The idm_base resource is optional for some platforms */ + regs = platform_get_resource_byname(pdev, IORESOURCE_MEM, "idm_base"); + if (regs) { + bgmac->plat.idm_base = devm_ioremap_resource(&pdev->dev, regs); + if (IS_ERR(bgmac->plat.idm_base)) + return PTR_ERR(bgmac->plat.idm_base); bgmac->feature_flags &= ~BGMAC_FEAT_IDM_MASK; + } - bgmac->plat.nicpm_base = devm_platform_ioremap_resource_byname(pdev, "nicpm_base"); - if (IS_ERR(bgmac->plat.nicpm_base)) - return PTR_ERR(bgmac->plat.nicpm_base); + /* The nicpm_base resource is optional for some platforms */ + regs = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nicpm_base"); + if (regs) { + bgmac->plat.nicpm_base = devm_ioremap_resource(&pdev->dev, + regs); + if (IS_ERR(bgmac->plat.nicpm_base)) + return PTR_ERR(bgmac->plat.nicpm_base); + } bgmac->read = platform_bgmac_read; bgmac->write = platform_bgmac_write; From b9208492fcaecff8f43915529ae34b3bcb03877c Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Thu, 17 Feb 2022 08:13:12 -0600 Subject: [PATCH 277/493] vsock: remove vsock from connected table when connect is interrupted by a signal vsock_connect() expects that the socket could already be in the TCP_ESTABLISHED state when the connecting task wakes up with a signal pending. If this happens the socket will be in the connected table, and it is not removed when the socket state is reset. In this situation it's common for the process to retry connect(), and if the connection is successful the socket will be added to the connected table a second time, corrupting the list. Prevent this by calling vsock_remove_connected() if a signal is received while waiting for a connection. This is harmless if the socket is not in the connected table, and if it is in the table then removing it will prevent list corruption from a double add. Note for backporting: this patch requires d5afa82c977e ("vsock: correct removal of socket from the list"), which is in all current stable trees except 4.9.y. Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Signed-off-by: Seth Forshee Reviewed-by: Stefano Garzarella Link: https://lore.kernel.org/r/20220217141312.2297547-1-sforshee@digitalocean.com Signed-off-by: Jakub Kicinski --- net/vmw_vsock/af_vsock.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/vmw_vsock/af_vsock.c b/net/vmw_vsock/af_vsock.c index 3235261f138db3..38baeb189d4e65 100644 --- a/net/vmw_vsock/af_vsock.c +++ b/net/vmw_vsock/af_vsock.c @@ -1401,6 +1401,7 @@ static int vsock_connect(struct socket *sock, struct sockaddr *addr, sk->sk_state = sk->sk_state == TCP_ESTABLISHED ? TCP_CLOSING : TCP_CLOSE; sock->state = SS_UNCONNECTED; vsock_transport_cancel_pkt(vsk); + vsock_remove_connected(vsk); goto out_wait; } else if (timeout == 0) { err = -ETIMEDOUT; From 80d47f5de5e311cbc0d01ebb6ee684e8f4c196c6 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 17 Feb 2022 08:57:47 -0800 Subject: [PATCH 278/493] mm: don't try to NUMA-migrate COW pages that have other uses Oded Gabbay reports that enabling NUMA balancing causes corruption with his Gaudi accelerator test load: "All the details are in the bug, but the bottom line is that somehow, this patch causes corruption when the numa balancing feature is enabled AND we don't use process affinity AND we use GUP to pin pages so our accelerator can DMA to/from system memory. Either disabling numa balancing, using process affinity to bind to specific numa-node or reverting this patch causes the bug to disappear" and Oded bisected the issue to commit 09854ba94c6a ("mm: do_wp_page() simplification"). Now, the NUMA balancing shouldn't actually be changing the writability of a page, and as such shouldn't matter for COW. But it appears it does. Suspicious. However, regardless of that, the condition for enabling NUMA faults in change_pte_range() is nonsensical. It uses "page_mapcount(page)" to decide if a COW page should be NUMA-protected or not, and that makes absolutely no sense. The number of mappings a page has is irrelevant: not only does GUP get a reference to a page as in Oded's case, but the other mappings migth be paged out and the only reference to them would be in the page count. Since we should never try to NUMA-balance a page that we can't move anyway due to other references, just fix the code to use 'page_count()'. Oded confirms that that fixes his issue. Now, this does imply that something in NUMA balancing ends up changing page protections (other than the obvious one of making the page inaccessible to get the NUMA faulting information). Otherwise the COW simplification wouldn't matter - since doing the GUP on the page would make sure it's writable. The cause of that permission change would be good to figure out too, since it clearly results in spurious COW events - but fixing the nonsensical test that just happened to work before is obviously the CorrectThing(tm) to do regardless. Fixes: 09854ba94c6a ("mm: do_wp_page() simplification") Link: https://bugzilla.kernel.org/show_bug.cgi?id=215616 Link: https://lore.kernel.org/all/CAFCwf10eNmwq2wD71xjUhqkvv5+_pJMR1nPug2RqNDcFT4H86Q@mail.gmail.com/ Reported-and-tested-by: Oded Gabbay Cc: David Hildenbrand Cc: Peter Xu Signed-off-by: Linus Torvalds --- mm/mprotect.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/mprotect.c b/mm/mprotect.c index 0138dfcdb1d804..5ca3fbcb149520 100644 --- a/mm/mprotect.c +++ b/mm/mprotect.c @@ -94,7 +94,7 @@ static unsigned long change_pte_range(struct vm_area_struct *vma, pmd_t *pmd, /* Also skip shared copy-on-write pages */ if (is_cow_mapping(vma->vm_flags) && - page_mapcount(page) != 1) + page_count(page) != 1) continue; /* From 017b355bbdc6620fd8fe05fe297f553ce9d855ee Mon Sep 17 00:00:00 2001 From: Mans Rullgard Date: Wed, 16 Feb 2022 12:46:34 +0000 Subject: [PATCH 279/493] net: dsa: lan9303: handle hwaccel VLAN tags Check for a hwaccel VLAN tag on rx and use it if present. Otherwise, use __skb_vlan_pop() like the other tag parsers do. This fixes the case where the VLAN tag has already been consumed by the master. Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303") Signed-off-by: Mans Rullgard Reviewed-by: Vladimir Oltean Link: https://lore.kernel.org/r/20220216124634.23123-1-mans@mansr.com Signed-off-by: Jakub Kicinski --- net/dsa/tag_lan9303.c | 21 +++++++-------------- 1 file changed, 7 insertions(+), 14 deletions(-) diff --git a/net/dsa/tag_lan9303.c b/net/dsa/tag_lan9303.c index cb548188f81340..98d7d7120bab2f 100644 --- a/net/dsa/tag_lan9303.c +++ b/net/dsa/tag_lan9303.c @@ -77,7 +77,6 @@ static struct sk_buff *lan9303_xmit(struct sk_buff *skb, struct net_device *dev) static struct sk_buff *lan9303_rcv(struct sk_buff *skb, struct net_device *dev) { - __be16 *lan9303_tag; u16 lan9303_tag1; unsigned int source_port; @@ -87,14 +86,15 @@ static struct sk_buff *lan9303_rcv(struct sk_buff *skb, struct net_device *dev) return NULL; } - lan9303_tag = dsa_etype_header_pos_rx(skb); - - if (lan9303_tag[0] != htons(ETH_P_8021Q)) { - dev_warn_ratelimited(&dev->dev, "Dropping packet due to invalid VLAN marker\n"); - return NULL; + if (skb_vlan_tag_present(skb)) { + lan9303_tag1 = skb_vlan_tag_get(skb); + __vlan_hwaccel_clear_tag(skb); + } else { + skb_push_rcsum(skb, ETH_HLEN); + __skb_vlan_pop(skb, &lan9303_tag1); + skb_pull_rcsum(skb, ETH_HLEN); } - lan9303_tag1 = ntohs(lan9303_tag[1]); source_port = lan9303_tag1 & 0x3; skb->dev = dsa_master_find_slave(dev, 0, source_port); @@ -103,13 +103,6 @@ static struct sk_buff *lan9303_rcv(struct sk_buff *skb, struct net_device *dev) return NULL; } - /* remove the special VLAN tag between the MAC addresses - * and the current ethertype field. - */ - skb_pull_rcsum(skb, 2 + 2); - - dsa_strip_etype_header(skb, LAN9303_TAG_LEN); - if (!(lan9303_tag1 & LAN9303_TAG_RX_TRAPPED_TO_CPU)) dsa_default_offload_fwd_mark(skb); From 430065e2671905ac675f97b7af240cc255964e93 Mon Sep 17 00:00:00 2001 From: Mans Rullgard Date: Wed, 16 Feb 2022 20:48:18 +0000 Subject: [PATCH 280/493] net: dsa: lan9303: add VLAN IDs to master device If the master device does VLAN filtering, the IDs used by the switch must be added for any frames to be received. Do this in the port_enable() function, and remove them in port_disable(). Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303") Signed-off-by: Mans Rullgard Reviewed-by: Florian Fainelli Reviewed-by: Vladimir Oltean Link: https://lore.kernel.org/r/20220216204818.28746-1-mans@mansr.com Signed-off-by: Jakub Kicinski --- drivers/net/dsa/Kconfig | 1 + drivers/net/dsa/lan9303-core.c | 11 +++++++++-- 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig index c0c91440340ae6..0029d279616fd6 100644 --- a/drivers/net/dsa/Kconfig +++ b/drivers/net/dsa/Kconfig @@ -82,6 +82,7 @@ config NET_DSA_REALTEK_SMI config NET_DSA_SMSC_LAN9303 tristate + depends on VLAN_8021Q || VLAN_8021Q=n select NET_DSA_TAG_LAN9303 select REGMAP help diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c index 873a5588171bf3..3969d89fa4db0b 100644 --- a/drivers/net/dsa/lan9303-core.c +++ b/drivers/net/dsa/lan9303-core.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include "lan9303.h" @@ -1083,21 +1084,27 @@ static void lan9303_adjust_link(struct dsa_switch *ds, int port, static int lan9303_port_enable(struct dsa_switch *ds, int port, struct phy_device *phy) { + struct dsa_port *dp = dsa_to_port(ds, port); struct lan9303 *chip = ds->priv; - if (!dsa_is_user_port(ds, port)) + if (!dsa_port_is_user(dp)) return 0; + vlan_vid_add(dp->cpu_dp->master, htons(ETH_P_8021Q), port); + return lan9303_enable_processing_port(chip, port); } static void lan9303_port_disable(struct dsa_switch *ds, int port) { + struct dsa_port *dp = dsa_to_port(ds, port); struct lan9303 *chip = ds->priv; - if (!dsa_is_user_port(ds, port)) + if (!dsa_port_is_user(dp)) return; + vlan_vid_del(dp->cpu_dp->master, htons(ETH_P_8021Q), port); + lan9303_disable_processing_port(chip, port); lan9303_phy_write(ds, chip->phy_addr_base + port, MII_BMCR, BMCR_PDOWN); } From 9fcf986cc4bc6a3a39f23fbcbbc3a9e52d3c24fd Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 16 Feb 2022 09:32:16 -0800 Subject: [PATCH 281/493] ipv4: fix data races in fib_alias_hw_flags_set fib_alias_hw_flags_set() can be used by concurrent threads, and is only RCU protected. We need to annotate accesses to following fields of struct fib_alias: offload, trap, offload_failed Because of READ_ONCE()WRITE_ONCE() limitations, make these field u8. BUG: KCSAN: data-race in fib_alias_hw_flags_set / fib_alias_hw_flags_set read to 0xffff888134224a6a of 1 bytes by task 2013 on cpu 1: fib_alias_hw_flags_set+0x28a/0x470 net/ipv4/fib_trie.c:1050 nsim_fib4_rt_hw_flags_set drivers/net/netdevsim/fib.c:350 [inline] nsim_fib4_rt_add drivers/net/netdevsim/fib.c:367 [inline] nsim_fib4_rt_insert drivers/net/netdevsim/fib.c:429 [inline] nsim_fib4_event drivers/net/netdevsim/fib.c:461 [inline] nsim_fib_event drivers/net/netdevsim/fib.c:881 [inline] nsim_fib_event_work+0x1852/0x2cf0 drivers/net/netdevsim/fib.c:1477 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 process_scheduled_works kernel/workqueue.c:2370 [inline] worker_thread+0x7df/0xa70 kernel/workqueue.c:2456 kthread+0x1bf/0x1e0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 write to 0xffff888134224a6a of 1 bytes by task 4872 on cpu 0: fib_alias_hw_flags_set+0x2d5/0x470 net/ipv4/fib_trie.c:1054 nsim_fib4_rt_hw_flags_set drivers/net/netdevsim/fib.c:350 [inline] nsim_fib4_rt_add drivers/net/netdevsim/fib.c:367 [inline] nsim_fib4_rt_insert drivers/net/netdevsim/fib.c:429 [inline] nsim_fib4_event drivers/net/netdevsim/fib.c:461 [inline] nsim_fib_event drivers/net/netdevsim/fib.c:881 [inline] nsim_fib_event_work+0x1852/0x2cf0 drivers/net/netdevsim/fib.c:1477 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 process_scheduled_works kernel/workqueue.c:2370 [inline] worker_thread+0x7df/0xa70 kernel/workqueue.c:2456 kthread+0x1bf/0x1e0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 value changed: 0x00 -> 0x02 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 4872 Comm: kworker/0:0 Not tainted 5.17.0-rc3-syzkaller-00188-g1d41d2e82623-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events nsim_fib_event_work Fixes: 90b93f1b31f8 ("ipv4: Add "offload" and "trap" indications to routes") Signed-off-by: Eric Dumazet Reported-by: syzbot Reviewed-by: Ido Schimmel Link: https://lore.kernel.org/r/20220216173217.3792411-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski --- net/ipv4/fib_lookup.h | 7 +++---- net/ipv4/fib_semantics.c | 6 +++--- net/ipv4/fib_trie.c | 22 +++++++++++++--------- net/ipv4/route.c | 4 ++-- 4 files changed, 21 insertions(+), 18 deletions(-) diff --git a/net/ipv4/fib_lookup.h b/net/ipv4/fib_lookup.h index e184bcb1994343..78e40ea42e58d9 100644 --- a/net/ipv4/fib_lookup.h +++ b/net/ipv4/fib_lookup.h @@ -16,10 +16,9 @@ struct fib_alias { u8 fa_slen; u32 tb_id; s16 fa_default; - u8 offload:1, - trap:1, - offload_failed:1, - unused:5; + u8 offload; + u8 trap; + u8 offload_failed; struct rcu_head rcu; }; diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c index b4589861b84c6b..2dd375f7407b68 100644 --- a/net/ipv4/fib_semantics.c +++ b/net/ipv4/fib_semantics.c @@ -525,9 +525,9 @@ void rtmsg_fib(int event, __be32 key, struct fib_alias *fa, fri.dst_len = dst_len; fri.tos = fa->fa_tos; fri.type = fa->fa_type; - fri.offload = fa->offload; - fri.trap = fa->trap; - fri.offload_failed = fa->offload_failed; + fri.offload = READ_ONCE(fa->offload); + fri.trap = READ_ONCE(fa->trap); + fri.offload_failed = READ_ONCE(fa->offload_failed); err = fib_dump_info(skb, info->portid, seq, event, &fri, nlm_flags); if (err < 0) { /* -EMSGSIZE implies BUG in fib_nlmsg_size() */ diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c index 8060524f425667..f7f74d5c14da66 100644 --- a/net/ipv4/fib_trie.c +++ b/net/ipv4/fib_trie.c @@ -1047,19 +1047,23 @@ void fib_alias_hw_flags_set(struct net *net, const struct fib_rt_info *fri) if (!fa_match) goto out; - if (fa_match->offload == fri->offload && fa_match->trap == fri->trap && - fa_match->offload_failed == fri->offload_failed) + /* These are paired with the WRITE_ONCE() happening in this function. + * The reason is that we are only protected by RCU at this point. + */ + if (READ_ONCE(fa_match->offload) == fri->offload && + READ_ONCE(fa_match->trap) == fri->trap && + READ_ONCE(fa_match->offload_failed) == fri->offload_failed) goto out; - fa_match->offload = fri->offload; - fa_match->trap = fri->trap; + WRITE_ONCE(fa_match->offload, fri->offload); + WRITE_ONCE(fa_match->trap, fri->trap); /* 2 means send notifications only if offload_failed was changed. */ if (net->ipv4.sysctl_fib_notify_on_flag_change == 2 && - fa_match->offload_failed == fri->offload_failed) + READ_ONCE(fa_match->offload_failed) == fri->offload_failed) goto out; - fa_match->offload_failed = fri->offload_failed; + WRITE_ONCE(fa_match->offload_failed, fri->offload_failed); if (!net->ipv4.sysctl_fib_notify_on_flag_change) goto out; @@ -2297,9 +2301,9 @@ static int fn_trie_dump_leaf(struct key_vector *l, struct fib_table *tb, fri.dst_len = KEYLENGTH - fa->fa_slen; fri.tos = fa->fa_tos; fri.type = fa->fa_type; - fri.offload = fa->offload; - fri.trap = fa->trap; - fri.offload_failed = fa->offload_failed; + fri.offload = READ_ONCE(fa->offload); + fri.trap = READ_ONCE(fa->trap); + fri.offload_failed = READ_ONCE(fa->offload_failed); err = fib_dump_info(skb, NETLINK_CB(cb->skb).portid, cb->nlh->nlmsg_seq, diff --git a/net/ipv4/route.c b/net/ipv4/route.c index ff6f91cdb6c4db..f33ad1f383b684 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -3395,8 +3395,8 @@ static int inet_rtm_getroute(struct sk_buff *in_skb, struct nlmsghdr *nlh, fa->fa_tos == fri.tos && fa->fa_info == res.fi && fa->fa_type == fri.type) { - fri.offload = fa->offload; - fri.trap = fa->trap; + fri.offload = READ_ONCE(fa->offload); + fri.trap = READ_ONCE(fa->trap); break; } } From d95d6320ba7a51d61c097ffc3bcafcf70283414e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 16 Feb 2022 09:32:17 -0800 Subject: [PATCH 282/493] ipv6: fix data-race in fib6_info_hw_flags_set / fib6_purge_rt Because fib6_info_hw_flags_set() is called without any synchronization, all accesses to gi6->offload, fi->trap and fi->offload_failed need some basic protection like READ_ONCE()/WRITE_ONCE(). BUG: KCSAN: data-race in fib6_info_hw_flags_set / fib6_purge_rt read to 0xffff8881087d5886 of 1 bytes by task 13953 on cpu 0: fib6_drop_pcpu_from net/ipv6/ip6_fib.c:1007 [inline] fib6_purge_rt+0x4f/0x580 net/ipv6/ip6_fib.c:1033 fib6_del_route net/ipv6/ip6_fib.c:1983 [inline] fib6_del+0x696/0x890 net/ipv6/ip6_fib.c:2028 __ip6_del_rt net/ipv6/route.c:3876 [inline] ip6_del_rt+0x83/0x140 net/ipv6/route.c:3891 __ipv6_dev_ac_dec+0x2b5/0x370 net/ipv6/anycast.c:374 ipv6_dev_ac_dec net/ipv6/anycast.c:387 [inline] __ipv6_sock_ac_close+0x141/0x200 net/ipv6/anycast.c:207 ipv6_sock_ac_close+0x79/0x90 net/ipv6/anycast.c:220 inet6_release+0x32/0x50 net/ipv6/af_inet6.c:476 __sock_release net/socket.c:650 [inline] sock_close+0x6c/0x150 net/socket.c:1318 __fput+0x295/0x520 fs/file_table.c:280 ____fput+0x11/0x20 fs/file_table.c:313 task_work_run+0x8e/0x110 kernel/task_work.c:164 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop kernel/entry/common.c:175 [inline] exit_to_user_mode_prepare+0x160/0x190 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:300 do_syscall_64+0x50/0xd0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae write to 0xffff8881087d5886 of 1 bytes by task 1912 on cpu 1: fib6_info_hw_flags_set+0x155/0x3b0 net/ipv6/route.c:6230 nsim_fib6_rt_hw_flags_set drivers/net/netdevsim/fib.c:668 [inline] nsim_fib6_rt_add drivers/net/netdevsim/fib.c:691 [inline] nsim_fib6_rt_insert drivers/net/netdevsim/fib.c:756 [inline] nsim_fib6_event drivers/net/netdevsim/fib.c:853 [inline] nsim_fib_event drivers/net/netdevsim/fib.c:886 [inline] nsim_fib_event_work+0x284f/0x2cf0 drivers/net/netdevsim/fib.c:1477 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x2c7/0x2e0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 value changed: 0x22 -> 0x2a Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 1912 Comm: kworker/1:3 Not tainted 5.16.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events nsim_fib_event_work Fixes: 0c5fcf9e249e ("IPv6: Add "offload failed" indication to routes") Fixes: bb3c4ab93e44 ("ipv6: Add "offload" and "trap" indications to routes") Signed-off-by: Eric Dumazet Cc: Amit Cohen Cc: Ido Schimmel Reported-by: syzbot Link: https://lore.kernel.org/r/20220216173217.3792411-2-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/netdevsim/fib.c | 4 ++-- include/net/ip6_fib.h | 10 ++++++---- net/ipv6/route.c | 19 ++++++++++--------- 3 files changed, 18 insertions(+), 15 deletions(-) diff --git a/drivers/net/netdevsim/fib.c b/drivers/net/netdevsim/fib.c index 4300261e2f9e78..378ee779061c33 100644 --- a/drivers/net/netdevsim/fib.c +++ b/drivers/net/netdevsim/fib.c @@ -623,14 +623,14 @@ static int nsim_fib6_rt_append(struct nsim_fib_data *data, if (err) goto err_fib6_rt_nh_del; - fib6_event->rt_arr[i]->trap = true; + WRITE_ONCE(fib6_event->rt_arr[i]->trap, true); } return 0; err_fib6_rt_nh_del: for (i--; i >= 0; i--) { - fib6_event->rt_arr[i]->trap = false; + WRITE_ONCE(fib6_event->rt_arr[i]->trap, false); nsim_fib6_rt_nh_del(fib6_rt, fib6_event->rt_arr[i]); } return err; diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h index 40ae8f1b18e502..2048bc8748cb6f 100644 --- a/include/net/ip6_fib.h +++ b/include/net/ip6_fib.h @@ -190,14 +190,16 @@ struct fib6_info { u32 fib6_metric; u8 fib6_protocol; u8 fib6_type; + + u8 offload; + u8 trap; + u8 offload_failed; + u8 should_flush:1, dst_nocount:1, dst_nopolicy:1, fib6_destroying:1, - offload:1, - trap:1, - offload_failed:1, - unused:1; + unused:4; struct rcu_head rcu; struct nexthop *nh; diff --git a/net/ipv6/route.c b/net/ipv6/route.c index f4884cda13b92e..ea1cf414a92e77 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -5753,11 +5753,11 @@ static int rt6_fill_node(struct net *net, struct sk_buff *skb, } if (!dst) { - if (rt->offload) + if (READ_ONCE(rt->offload)) rtm->rtm_flags |= RTM_F_OFFLOAD; - if (rt->trap) + if (READ_ONCE(rt->trap)) rtm->rtm_flags |= RTM_F_TRAP; - if (rt->offload_failed) + if (READ_ONCE(rt->offload_failed)) rtm->rtm_flags |= RTM_F_OFFLOAD_FAILED; } @@ -6215,19 +6215,20 @@ void fib6_info_hw_flags_set(struct net *net, struct fib6_info *f6i, struct sk_buff *skb; int err; - if (f6i->offload == offload && f6i->trap == trap && - f6i->offload_failed == offload_failed) + if (READ_ONCE(f6i->offload) == offload && + READ_ONCE(f6i->trap) == trap && + READ_ONCE(f6i->offload_failed) == offload_failed) return; - f6i->offload = offload; - f6i->trap = trap; + WRITE_ONCE(f6i->offload, offload); + WRITE_ONCE(f6i->trap, trap); /* 2 means send notifications only if offload_failed was changed. */ if (net->ipv6.sysctl.fib_notify_on_flag_change == 2 && - f6i->offload_failed == offload_failed) + READ_ONCE(f6i->offload_failed) == offload_failed) return; - f6i->offload_failed = offload_failed; + WRITE_ONCE(f6i->offload_failed, offload_failed); if (!rcu_access_pointer(f6i->fib6_node)) /* The route was removed from the tree, do not send From 7dbcda584eaa5bdb4a281c379207dacc1a5e6081 Mon Sep 17 00:00:00 2001 From: Danie du Toit Date: Thu, 17 Feb 2022 14:48:20 +0200 Subject: [PATCH 283/493] nfp: flower: netdev offload check for ip6gretap IPv6 GRE tunnels are not being offloaded, this is caused by a missing netdev offload check. The functionality of IPv6 GRE tunnel offloading was previously added but this check was not included. Adding the ip6gretap check allows IPv6 GRE tunnels to be offloaded correctly. Fixes: f7536ffb0986 ("nfp: flower: Allow ipv6gretap interface for offloading") Signed-off-by: Danie du Toit Signed-off-by: Louis Peens Signed-off-by: Simon Horman Link: https://lore.kernel.org/r/20220217124820.40436-1-louis.peens@corigine.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/netronome/nfp/flower/cmsg.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/netronome/nfp/flower/cmsg.h b/drivers/net/ethernet/netronome/nfp/flower/cmsg.h index 784292b1629070..1543e47456d57e 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/cmsg.h +++ b/drivers/net/ethernet/netronome/nfp/flower/cmsg.h @@ -723,6 +723,8 @@ static inline bool nfp_fl_is_netdev_to_offload(struct net_device *netdev) return true; if (netif_is_gretap(netdev)) return true; + if (netif_is_ip6gretap(netdev)) + return true; return false; } From a3580ac9b7a394a7d780448ba75cc5348d8a9e04 Mon Sep 17 00:00:00 2001 From: Luis Chamberlain Date: Mon, 14 Feb 2022 18:08:28 -0800 Subject: [PATCH 284/493] fs/file_table: fix adding missing kmemleak_not_leak() Commit b42bc9a3c511 ("Fix regression due to "fs: move binfmt_misc sysctl to its own file") fixed a regression, however it failed to add a kmemleak_not_leak(). Fixes: b42bc9a3c511 ("Fix regression due to "fs: move binfmt_misc sysctl to its own file") Reported-by: Tong Zhang Cc: Tong Zhang Signed-off-by: Luis Chamberlain Signed-off-by: Linus Torvalds --- fs/file_table.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/fs/file_table.c b/fs/file_table.c index 4969021fa6764b..7d2e692b66a94f 100644 --- a/fs/file_table.c +++ b/fs/file_table.c @@ -27,6 +27,7 @@ #include #include #include +#include #include @@ -119,8 +120,11 @@ static struct ctl_table fs_stat_sysctls[] = { static int __init init_fs_stat_sysctls(void) { register_sysctl_init("fs", fs_stat_sysctls); - if (IS_ENABLED(CONFIG_BINFMT_MISC)) - register_sysctl_mount_point("fs/binfmt_misc"); + if (IS_ENABLED(CONFIG_BINFMT_MISC)) { + struct ctl_table_header *hdr; + hdr = register_sysctl_mount_point("fs/binfmt_misc"); + kmemleak_not_leak(hdr); + } return 0; } fs_initcall(init_fs_stat_sysctls); From e5733d8c89c3b57c8fcd40b8acf508388fabaa42 Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Wed, 2 Feb 2022 11:41:12 -0800 Subject: [PATCH 285/493] x86/sgx: Fix missing poison handling in reclaimer The SGX reclaimer code lacks page poison handling in its main free path. This can lead to avoidable machine checks if a poisoned page is freed and reallocated instead of being isolated. A troublesome scenario is: 1. Machine check (#MC) occurs (asynchronous, !MF_ACTION_REQUIRED) 2. arch_memory_failure() is eventually called 3. (SGX) page->poison set to 1 4. Page is reclaimed 5. Page added to normal free lists by sgx_reclaim_pages() ^ This is the bug (poison pages should be isolated on the sgx_poison_page_list instead) 6. Page is reallocated by some innocent enclave, a second (synchronous) in-kernel #MC is induced, probably during EADD instruction. ^ This is the fallout from the bug (6) is unfortunate and can be avoided by replacing the open coded enclave page freeing code in the reclaimer with sgx_free_epc_page() to obtain support for poison page handling that includes placing the poisoned page on the correct list. Fixes: d6d261bded8a ("x86/sgx: Add new sgx_epc_page flag bit to mark free pages") Fixes: 992801ae9243 ("x86/sgx: Initial poison handling for dirty and free pages") Signed-off-by: Reinette Chatre Signed-off-by: Dave Hansen Reviewed-by: Jarkko Sakkinen Link: https://lkml.kernel.org/r/dcc95eb2aaefb042527ac50d0a50738c7c160dac.1643830353.git.reinette.chatre@intel.com --- arch/x86/kernel/cpu/sgx/main.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/arch/x86/kernel/cpu/sgx/main.c b/arch/x86/kernel/cpu/sgx/main.c index 4b41efc9e367aa..8e4bc6453d2635 100644 --- a/arch/x86/kernel/cpu/sgx/main.c +++ b/arch/x86/kernel/cpu/sgx/main.c @@ -344,10 +344,8 @@ static void sgx_reclaim_pages(void) { struct sgx_epc_page *chunk[SGX_NR_TO_SCAN]; struct sgx_backing backing[SGX_NR_TO_SCAN]; - struct sgx_epc_section *section; struct sgx_encl_page *encl_page; struct sgx_epc_page *epc_page; - struct sgx_numa_node *node; pgoff_t page_index; int cnt = 0; int ret; @@ -418,13 +416,7 @@ static void sgx_reclaim_pages(void) kref_put(&encl_page->encl->refcount, sgx_encl_release); epc_page->flags &= ~SGX_EPC_PAGE_RECLAIMER_TRACKED; - section = &sgx_epc_sections[epc_page->section]; - node = section->node; - - spin_lock(&node->lock); - list_add_tail(&epc_page->list, &node->free_page_list); - spin_unlock(&node->lock); - atomic_long_inc(&sgx_nr_free_pages); + sgx_free_epc_page(epc_page); } } From 75134f16e7dd0007aa474b281935c5f42e79f2c8 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 17 Feb 2022 10:19:02 -0800 Subject: [PATCH 286/493] bpf: Add schedule points in batch ops syzbot reported various soft lockups caused by bpf batch operations. INFO: task kworker/1:1:27 blocked for more than 140 seconds. INFO: task hung in rcu_barrier Nothing prevents batch ops to process huge amount of data, we need to add schedule points in them. Note that maybe_wait_bpf_programs(map) calls from generic_map_delete_batch() can be factorized by moving the call after the loop. This will be done later in -next tree once we get this fix merged, unless there is strong opinion doing this optimization sooner. Fixes: aa2e93b8e58e ("bpf: Add generic support for update and delete batch ops") Fixes: cb4d03ab499d ("bpf: Add generic support for lookup batch op") Reported-by: syzbot Signed-off-by: Eric Dumazet Signed-off-by: Alexei Starovoitov Reviewed-by: Stanislav Fomichev Acked-by: Brian Vazquez Link: https://lore.kernel.org/bpf/20220217181902.808742-1-eric.dumazet@gmail.com --- kernel/bpf/syscall.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c index fa4505f9b6119b..ca70fe6fba3879 100644 --- a/kernel/bpf/syscall.c +++ b/kernel/bpf/syscall.c @@ -1355,6 +1355,7 @@ int generic_map_delete_batch(struct bpf_map *map, maybe_wait_bpf_programs(map); if (err) break; + cond_resched(); } if (copy_to_user(&uattr->batch.count, &cp, sizeof(cp))) err = -EFAULT; @@ -1412,6 +1413,7 @@ int generic_map_update_batch(struct bpf_map *map, if (err) break; + cond_resched(); } if (copy_to_user(&uattr->batch.count, &cp, sizeof(cp))) @@ -1509,6 +1511,7 @@ int generic_map_lookup_batch(struct bpf_map *map, swap(prev_key, key); retry = MAP_LOOKUP_RETRIES; cp++; + cond_resched(); } if (err == -EFAULT) From a6ab75cec1e461f8a35559054c146c21428430b8 Mon Sep 17 00:00:00 2001 From: Zhang Changzhong Date: Wed, 16 Feb 2022 22:18:08 +0800 Subject: [PATCH 287/493] bonding: force carrier update when releasing slave In __bond_release_one(), bond_set_carrier() is only called when bond device has no slave. Therefore, if we remove the up slave from a master with two slaves and keep the down slave, the master will remain up. Fix this by moving bond_set_carrier() out of if (!bond_has_slaves(bond)) statement. Reproducer: $ insmod bonding.ko mode=0 miimon=100 max_bonds=2 $ ifconfig bond0 up $ ifenslave bond0 eth0 eth1 $ ifconfig eth0 down $ ifenslave -d bond0 eth1 $ cat /proc/net/bonding/bond0 Fixes: ff59c4563a8d ("[PATCH] bonding: support carrier state for master") Signed-off-by: Zhang Changzhong Acked-by: Jay Vosburgh Link: https://lore.kernel.org/r/1645021088-38370-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski --- drivers/net/bonding/bond_main.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 238b56d77c369d..aebeb46e6fa6f1 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2379,10 +2379,9 @@ static int __bond_release_one(struct net_device *bond_dev, bond_select_active_slave(bond); } - if (!bond_has_slaves(bond)) { - bond_set_carrier(bond); + bond_set_carrier(bond); + if (!bond_has_slaves(bond)) eth_hw_addr_random(bond_dev); - } unblock_netpoll_tx(); synchronize_rcu(); From 132507ed04ce0c5559be04dd378fec4f3bbc00e8 Mon Sep 17 00:00:00 2001 From: Nikhil Gupta Date: Fri, 28 Jan 2022 09:53:21 +0530 Subject: [PATCH 288/493] of/fdt: move elfcorehdr reservation early for crash dump kernel elfcorehdr_addr is fixed address passed to Second kernel which may be conflicted with potential reserved memory in Second kernel,so fdt_reserve_elfcorehdr() ahead of fdt_init_reserved_mem() can relieve this situation. Signed-off-by: Nikhil Gupta Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20220128042321.15228-1-nikhil.gupta@nxp.com --- drivers/of/fdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c index ad85ff6474ff13..ec315b060cd50d 100644 --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c @@ -648,8 +648,8 @@ void __init early_init_fdt_scan_reserved_mem(void) } fdt_scan_reserved_mem(); - fdt_init_reserved_mem(); fdt_reserve_elfcorehdr(); + fdt_init_reserved_mem(); } /** From 3494894afff4ad11f25d8342cc99699be496d082 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Fri, 18 Feb 2022 00:24:08 +0100 Subject: [PATCH 289/493] clk: qcom: gcc-msm8994: Remove NoC clocks Just like in commit 05cf3ec00d46 ("clk: qcom: gcc-msm8996: Drop (again) gcc_aggre1_pnoc_ahb_clk") adding NoC clocks turned out to be a huge mistake, as they cause a lot of issues at little benefit (basically letting Linux know about their children's frequencies), especially when mishandled or misconfigured. Adding these ones broke SDCC approx 99 out of 100 times, but that somehow went unnoticed. To prevent further issues like this one, remove them. This commit is effectively a revert of 74a33fac3aab ("clk: qcom: gcc-msm8994: Add missing NoC clocks") with ABI preservation. Fixes: 74a33fac3aab ("clk: qcom: gcc-msm8994: Add missing NoC clocks") Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20220217232408.78932-1-konrad.dybcio@somainline.org Signed-off-by: Stephen Boyd --- drivers/clk/qcom/gcc-msm8994.c | 106 +++------------------------------ 1 file changed, 9 insertions(+), 97 deletions(-) diff --git a/drivers/clk/qcom/gcc-msm8994.c b/drivers/clk/qcom/gcc-msm8994.c index 71aa630fa4bd53..f09499999eb3a9 100644 --- a/drivers/clk/qcom/gcc-msm8994.c +++ b/drivers/clk/qcom/gcc-msm8994.c @@ -108,42 +108,6 @@ static const struct clk_parent_data gcc_xo_gpll0_gpll4[] = { { .hw = &gpll4.clkr.hw }, }; -static struct clk_rcg2 system_noc_clk_src = { - .cmd_rcgr = 0x0120, - .hid_width = 5, - .parent_map = gcc_xo_gpll0_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "system_noc_clk_src", - .parent_data = gcc_xo_gpll0, - .num_parents = ARRAY_SIZE(gcc_xo_gpll0), - .ops = &clk_rcg2_ops, - }, -}; - -static struct clk_rcg2 config_noc_clk_src = { - .cmd_rcgr = 0x0150, - .hid_width = 5, - .parent_map = gcc_xo_gpll0_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "config_noc_clk_src", - .parent_data = gcc_xo_gpll0, - .num_parents = ARRAY_SIZE(gcc_xo_gpll0), - .ops = &clk_rcg2_ops, - }, -}; - -static struct clk_rcg2 periph_noc_clk_src = { - .cmd_rcgr = 0x0190, - .hid_width = 5, - .parent_map = gcc_xo_gpll0_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "periph_noc_clk_src", - .parent_data = gcc_xo_gpll0, - .num_parents = ARRAY_SIZE(gcc_xo_gpll0), - .ops = &clk_rcg2_ops, - }, -}; - static struct freq_tbl ftbl_ufs_axi_clk_src[] = { F(50000000, P_GPLL0, 12, 0, 0), F(100000000, P_GPLL0, 6, 0, 0), @@ -1150,8 +1114,6 @@ static struct clk_branch gcc_blsp1_ahb_clk = { .enable_mask = BIT(17), .hw.init = &(struct clk_init_data){ .name = "gcc_blsp1_ahb_clk", - .parent_hws = (const struct clk_hw *[]){ &periph_noc_clk_src.clkr.hw }, - .num_parents = 1, .ops = &clk_branch2_ops, }, }, @@ -1435,8 +1397,6 @@ static struct clk_branch gcc_blsp2_ahb_clk = { .enable_mask = BIT(15), .hw.init = &(struct clk_init_data){ .name = "gcc_blsp2_ahb_clk", - .parent_hws = (const struct clk_hw *[]){ &periph_noc_clk_src.clkr.hw }, - .num_parents = 1, .ops = &clk_branch2_ops, }, }, @@ -1764,8 +1724,6 @@ static struct clk_branch gcc_lpass_q6_axi_clk = { .enable_mask = BIT(0), .hw.init = &(struct clk_init_data){ .name = "gcc_lpass_q6_axi_clk", - .parent_hws = (const struct clk_hw *[]){ &system_noc_clk_src.clkr.hw }, - .num_parents = 1, .ops = &clk_branch2_ops, }, }, @@ -1778,8 +1736,6 @@ static struct clk_branch gcc_mss_q6_bimc_axi_clk = { .enable_mask = BIT(0), .hw.init = &(struct clk_init_data){ .name = "gcc_mss_q6_bimc_axi_clk", - .parent_hws = (const struct clk_hw *[]){ &system_noc_clk_src.clkr.hw }, - .num_parents = 1, .ops = &clk_branch2_ops, }, }, @@ -1807,9 +1763,6 @@ static struct clk_branch gcc_pcie_0_cfg_ahb_clk = { .enable_mask = BIT(0), .hw.init = &(struct clk_init_data){ .name = "gcc_pcie_0_cfg_ahb_clk", - .parent_hws = (const struct clk_hw *[]){ &config_noc_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, .ops = &clk_branch2_ops, }, }, @@ -1822,9 +1775,6 @@ static struct clk_branch gcc_pcie_0_mstr_axi_clk = { .enable_mask = BIT(0), .hw.init = &(struct clk_init_data){ .name = "gcc_pcie_0_mstr_axi_clk", - .parent_hws = (const struct clk_hw *[]){ &system_noc_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, .ops = &clk_branch2_ops, }, }, @@ -1854,9 +1804,6 @@ static struct clk_branch gcc_pcie_0_slv_axi_clk = { .enable_mask = BIT(0), .hw.init = &(struct clk_init_data){ .name = "gcc_pcie_0_slv_axi_clk", - .parent_hws = (const struct clk_hw *[]){ &system_noc_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, .ops = &clk_branch2_ops, }, }, @@ -1884,9 +1831,6 @@ static struct clk_branch gcc_pcie_1_cfg_ahb_clk = { .enable_mask = BIT(0), .hw.init = &(struct clk_init_data){ .name = "gcc_pcie_1_cfg_ahb_clk", - .parent_hws = (const struct clk_hw *[]){ &config_noc_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, .ops = &clk_branch2_ops, }, }, @@ -1899,9 +1843,6 @@ static struct clk_branch gcc_pcie_1_mstr_axi_clk = { .enable_mask = BIT(0), .hw.init = &(struct clk_init_data){ .name = "gcc_pcie_1_mstr_axi_clk", - .parent_hws = (const struct clk_hw *[]){ &system_noc_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, .ops = &clk_branch2_ops, }, }, @@ -1930,9 +1871,6 @@ static struct clk_branch gcc_pcie_1_slv_axi_clk = { .enable_mask = BIT(0), .hw.init = &(struct clk_init_data){ .name = "gcc_pcie_1_slv_axi_clk", - .parent_hws = (const struct clk_hw *[]){ &system_noc_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, .ops = &clk_branch2_ops, }, }, @@ -1960,8 +1898,6 @@ static struct clk_branch gcc_pdm_ahb_clk = { .enable_mask = BIT(0), .hw.init = &(struct clk_init_data){ .name = "gcc_pdm_ahb_clk", - .parent_hws = (const struct clk_hw *[]){ &periph_noc_clk_src.clkr.hw }, - .num_parents = 1, .ops = &clk_branch2_ops, }, }, @@ -1989,9 +1925,6 @@ static struct clk_branch gcc_sdcc1_ahb_clk = { .enable_mask = BIT(0), .hw.init = &(struct clk_init_data){ .name = "gcc_sdcc1_ahb_clk", - .parent_hws = (const struct clk_hw *[]){ &periph_noc_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, .ops = &clk_branch2_ops, }, }, @@ -2004,9 +1937,6 @@ static struct clk_branch gcc_sdcc2_ahb_clk = { .enable_mask = BIT(0), .hw.init = &(struct clk_init_data){ .name = "gcc_sdcc2_ahb_clk", - .parent_hws = (const struct clk_hw *[]){ &periph_noc_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, .ops = &clk_branch2_ops, }, }, @@ -2034,9 +1964,6 @@ static struct clk_branch gcc_sdcc3_ahb_clk = { .enable_mask = BIT(0), .hw.init = &(struct clk_init_data){ .name = "gcc_sdcc3_ahb_clk", - .parent_hws = (const struct clk_hw *[]){ &periph_noc_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, .ops = &clk_branch2_ops, }, }, @@ -2064,9 +1991,6 @@ static struct clk_branch gcc_sdcc4_ahb_clk = { .enable_mask = BIT(0), .hw.init = &(struct clk_init_data){ .name = "gcc_sdcc4_ahb_clk", - .parent_hws = (const struct clk_hw *[]){ &periph_noc_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, .ops = &clk_branch2_ops, }, }, @@ -2124,8 +2048,6 @@ static struct clk_branch gcc_tsif_ahb_clk = { .enable_mask = BIT(0), .hw.init = &(struct clk_init_data){ .name = "gcc_tsif_ahb_clk", - .parent_hws = (const struct clk_hw *[]){ &periph_noc_clk_src.clkr.hw }, - .num_parents = 1, .ops = &clk_branch2_ops, }, }, @@ -2153,8 +2075,6 @@ static struct clk_branch gcc_ufs_ahb_clk = { .enable_mask = BIT(0), .hw.init = &(struct clk_init_data){ .name = "gcc_ufs_ahb_clk", - .parent_hws = (const struct clk_hw *[]){ &config_noc_clk_src.clkr.hw }, - .num_parents = 1, .ops = &clk_branch2_ops, }, }, @@ -2198,8 +2118,6 @@ static struct clk_branch gcc_ufs_rx_symbol_0_clk = { .enable_mask = BIT(0), .hw.init = &(struct clk_init_data){ .name = "gcc_ufs_rx_symbol_0_clk", - .parent_hws = (const struct clk_hw *[]){ &system_noc_clk_src.clkr.hw }, - .num_parents = 1, .ops = &clk_branch2_ops, }, }, @@ -2213,8 +2131,6 @@ static struct clk_branch gcc_ufs_rx_symbol_1_clk = { .enable_mask = BIT(0), .hw.init = &(struct clk_init_data){ .name = "gcc_ufs_rx_symbol_1_clk", - .parent_hws = (const struct clk_hw *[]){ &system_noc_clk_src.clkr.hw }, - .num_parents = 1, .ops = &clk_branch2_ops, }, }, @@ -2243,8 +2159,6 @@ static struct clk_branch gcc_ufs_tx_symbol_0_clk = { .enable_mask = BIT(0), .hw.init = &(struct clk_init_data){ .name = "gcc_ufs_tx_symbol_0_clk", - .parent_hws = (const struct clk_hw *[]){ &system_noc_clk_src.clkr.hw }, - .num_parents = 1, .ops = &clk_branch2_ops, }, }, @@ -2258,8 +2172,6 @@ static struct clk_branch gcc_ufs_tx_symbol_1_clk = { .enable_mask = BIT(0), .hw.init = &(struct clk_init_data){ .name = "gcc_ufs_tx_symbol_1_clk", - .parent_hws = (const struct clk_hw *[]){ &system_noc_clk_src.clkr.hw }, - .num_parents = 1, .ops = &clk_branch2_ops, }, }, @@ -2364,8 +2276,6 @@ static struct clk_branch gcc_usb_hs_ahb_clk = { .enable_mask = BIT(0), .hw.init = &(struct clk_init_data){ .name = "gcc_usb_hs_ahb_clk", - .parent_hws = (const struct clk_hw *[]){ &periph_noc_clk_src.clkr.hw }, - .num_parents = 1, .ops = &clk_branch2_ops, }, }, @@ -2488,8 +2398,6 @@ static struct clk_branch gcc_boot_rom_ahb_clk = { .enable_mask = BIT(10), .hw.init = &(struct clk_init_data){ .name = "gcc_boot_rom_ahb_clk", - .parent_hws = (const struct clk_hw *[]){ &config_noc_clk_src.clkr.hw }, - .num_parents = 1, .ops = &clk_branch2_ops, }, }, @@ -2503,8 +2411,6 @@ static struct clk_branch gcc_prng_ahb_clk = { .enable_mask = BIT(13), .hw.init = &(struct clk_init_data){ .name = "gcc_prng_ahb_clk", - .parent_hws = (const struct clk_hw *[]){ &periph_noc_clk_src.clkr.hw }, - .num_parents = 1, .ops = &clk_branch2_ops, }, }, @@ -2547,9 +2453,6 @@ static struct clk_regmap *gcc_msm8994_clocks[] = { [GPLL0] = &gpll0.clkr, [GPLL4_EARLY] = &gpll4_early.clkr, [GPLL4] = &gpll4.clkr, - [CONFIG_NOC_CLK_SRC] = &config_noc_clk_src.clkr, - [PERIPH_NOC_CLK_SRC] = &periph_noc_clk_src.clkr, - [SYSTEM_NOC_CLK_SRC] = &system_noc_clk_src.clkr, [UFS_AXI_CLK_SRC] = &ufs_axi_clk_src.clkr, [USB30_MASTER_CLK_SRC] = &usb30_master_clk_src.clkr, [BLSP1_QUP1_I2C_APPS_CLK_SRC] = &blsp1_qup1_i2c_apps_clk_src.clkr, @@ -2696,6 +2599,15 @@ static struct clk_regmap *gcc_msm8994_clocks[] = { [USB_SS_PHY_LDO] = &usb_ss_phy_ldo.clkr, [GCC_BOOT_ROM_AHB_CLK] = &gcc_boot_rom_ahb_clk.clkr, [GCC_PRNG_AHB_CLK] = &gcc_prng_ahb_clk.clkr, + + /* + * The following clocks should NOT be managed by this driver, but they once were + * mistakengly added. Now they are only here to indicate that they are not defined + * on purpose, even though the names will stay in the header file (for ABI sanity). + */ + [CONFIG_NOC_CLK_SRC] = NULL, + [PERIPH_NOC_CLK_SRC] = NULL, + [SYSTEM_NOC_CLK_SRC] = NULL, }; static struct gdsc *gcc_msm8994_gdscs[] = { From 2f0754f27a230fee6e6d753f07585cee03bedfe3 Mon Sep 17 00:00:00 2001 From: Siarhei Volkau Date: Sat, 5 Feb 2022 20:18:49 +0300 Subject: [PATCH 290/493] clk: jz4725b: fix mmc0 clock gating The mmc0 clock gate bit was mistakenly assigned to "i2s" clock. You can find that the same bit is assigned to "mmc0" too. It leads to mmc0 hang for a long time after any sound activity also it prevented PM_SLEEP to work properly. I guess it was introduced by copy-paste from jz4740 driver where it is really controls I2S clock gate. Fixes: 226dfa4726eb ("clk: Add Ingenic jz4725b CGU driver") Signed-off-by: Siarhei Volkau Tested-by: Siarhei Volkau Reviewed-by: Paul Cercueil Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220205171849.687805-2-lis8215@gmail.com Signed-off-by: Stephen Boyd --- drivers/clk/ingenic/jz4725b-cgu.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/clk/ingenic/jz4725b-cgu.c b/drivers/clk/ingenic/jz4725b-cgu.c index 744d136b721bce..15d61793f53b13 100644 --- a/drivers/clk/ingenic/jz4725b-cgu.c +++ b/drivers/clk/ingenic/jz4725b-cgu.c @@ -139,11 +139,10 @@ static const struct ingenic_cgu_clk_info jz4725b_cgu_clocks[] = { }, [JZ4725B_CLK_I2S] = { - "i2s", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE, + "i2s", CGU_CLK_MUX | CGU_CLK_DIV, .parents = { JZ4725B_CLK_EXT, JZ4725B_CLK_PLL_HALF, -1, -1 }, .mux = { CGU_REG_CPCCR, 31, 1 }, .div = { CGU_REG_I2SCDR, 0, 1, 9, -1, -1, -1 }, - .gate = { CGU_REG_CLKGR, 6 }, }, [JZ4725B_CLK_SPI] = { From ba1f77c546966c12d86220d078e5838dcaeab348 Mon Sep 17 00:00:00 2001 From: Leonardo Bras Date: Fri, 18 Feb 2022 00:41:00 -0300 Subject: [PATCH 291/493] x86/kvm: Fix compilation warning in non-x86_64 builds On non-x86_64 builds, helpers gtod_is_based_on_tsc() and kvm_guest_supported_xfd() are defined but never used. Because these are static inline but are in a .c file, some compilers do warn for them with -Wunused-function, which becomes an error if -Werror is present. Add #ifdef so they are only defined in x86_64 builds. Reported-by: kernel test robot Signed-off-by: Leonardo Bras Message-Id: <20220218034100.115702-1-leobras@redhat.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 20ad6fe391bf8f..82a9dcd8c67fe1 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -989,10 +989,12 @@ static inline u64 kvm_guest_supported_xcr0(struct kvm_vcpu *vcpu) return vcpu->arch.guest_fpu.fpstate->user_xfeatures; } +#ifdef CONFIG_X86_64 static inline u64 kvm_guest_supported_xfd(struct kvm_vcpu *vcpu) { return kvm_guest_supported_xcr0(vcpu) & XFEATURE_MASK_USER_DYNAMIC; } +#endif static int __kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr) { @@ -2361,10 +2363,12 @@ static u64 compute_guest_tsc(struct kvm_vcpu *vcpu, s64 kernel_ns) return tsc; } +#ifdef CONFIG_X86_64 static inline int gtod_is_based_on_tsc(int mode) { return mode == VDSO_CLOCKMODE_TSC || mode == VDSO_CLOCKMODE_HVCLOCK; } +#endif static void kvm_track_tsc_matching(struct kvm_vcpu *vcpu) { From ec756e40e271866f951d77c5e923d8deb6002b15 Mon Sep 17 00:00:00 2001 From: Wanpeng Li Date: Fri, 18 Feb 2022 00:10:38 -0800 Subject: [PATCH 292/493] x86/kvm: Don't use pv tlb/ipi/sched_yield if on 1 vCPU Inspired by commit 3553ae5690a (x86/kvm: Don't use pvqspinlock code if only 1 vCPU), on a VM with only 1 vCPU, there is no need to enable pv tlb/ipi/sched_yield and we can save the memory for __pv_cpu_mask. Signed-off-by: Wanpeng Li Message-Id: <1645171838-2855-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini --- arch/x86/kernel/kvm.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c index a438217cbface2..f734e3b0cfecbd 100644 --- a/arch/x86/kernel/kvm.c +++ b/arch/x86/kernel/kvm.c @@ -462,19 +462,22 @@ static bool pv_tlb_flush_supported(void) { return (kvm_para_has_feature(KVM_FEATURE_PV_TLB_FLUSH) && !kvm_para_has_hint(KVM_HINTS_REALTIME) && - kvm_para_has_feature(KVM_FEATURE_STEAL_TIME)); + kvm_para_has_feature(KVM_FEATURE_STEAL_TIME) && + (num_possible_cpus() != 1)); } static bool pv_ipi_supported(void) { - return kvm_para_has_feature(KVM_FEATURE_PV_SEND_IPI); + return (kvm_para_has_feature(KVM_FEATURE_PV_SEND_IPI) && + (num_possible_cpus() != 1)); } static bool pv_sched_yield_supported(void) { return (kvm_para_has_feature(KVM_FEATURE_PV_SCHED_YIELD) && !kvm_para_has_hint(KVM_HINTS_REALTIME) && - kvm_para_has_feature(KVM_FEATURE_STEAL_TIME)); + kvm_para_has_feature(KVM_FEATURE_STEAL_TIME) && + (num_possible_cpus() != 1)); } #define KVM_IPI_CLUSTER_SIZE (2 * BITS_PER_LONG) From 1aae05754fca861ce17f1f17fddcfbf8c0fc25b6 Mon Sep 17 00:00:00 2001 From: Rudi Heitbaum Date: Wed, 16 Feb 2022 21:22:28 +0000 Subject: [PATCH 293/493] drm/imx/dcss: i.MX8MQ DCSS select DRM_GEM_CMA_HELPER Without DRM_GEM_CMA_HELPER i.MX8MQ DCSS won't build. This needs to be there. Signed-off-by: Rudi Heitbaum Reviewed-by: Laurentiu Palcu Signed-off-by: Laurentiu Palcu Link: https://patchwork.freedesktop.org/patch/msgid/20220216212228.1217831-1-rudi@heitbaum.com --- drivers/gpu/drm/imx/dcss/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/imx/dcss/Kconfig b/drivers/gpu/drm/imx/dcss/Kconfig index 7374f1952762e6..5c2b2277afbf54 100644 --- a/drivers/gpu/drm/imx/dcss/Kconfig +++ b/drivers/gpu/drm/imx/dcss/Kconfig @@ -2,6 +2,7 @@ config DRM_IMX_DCSS tristate "i.MX8MQ DCSS" select IMX_IRQSTEER select DRM_KMS_HELPER + select DRM_GEM_CMA_HELPER select VIDEOMODE_HELPERS depends on DRM && ARCH_MXC && ARM64 help From 834cea3a252ed4847db076a769ad9efe06afe2d5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Tue, 15 Feb 2022 08:27:35 +0100 Subject: [PATCH 294/493] i2c: brcmstb: fix support for DSL and CM variants MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit DSL and CM (Cable Modem) support 8 B max transfer size and have a custom DT binding for that reason. This driver was checking for a wrong "compatible" however which resulted in an incorrect setup. Fixes: e2e5a2c61837 ("i2c: brcmstb: Adding support for CM and DSL SoCs") Signed-off-by: Rafał Miłecki Acked-by: Florian Fainelli Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-brcmstb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c index 490ee3962645db..b00f35c0b06621 100644 --- a/drivers/i2c/busses/i2c-brcmstb.c +++ b/drivers/i2c/busses/i2c-brcmstb.c @@ -673,7 +673,7 @@ static int brcmstb_i2c_probe(struct platform_device *pdev) /* set the data in/out register size for compatible SoCs */ if (of_device_is_compatible(dev->device->of_node, - "brcmstb,brcmper-i2c")) + "brcm,brcmper-i2c")) dev->data_regsz = sizeof(u8); else dev->data_regsz = sizeof(u32); From 44cad52cc14ae10062f142ec16ede489bccf4469 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Mon, 14 Feb 2022 13:05:49 +0100 Subject: [PATCH 295/493] x86/ptrace: Fix xfpregs_set()'s incorrect xmm clearing MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit xfpregs_set() handles 32-bit REGSET_XFP and 64-bit REGSET_FP. The actual code treats these regsets as modern FX state (i.e. the beginning part of XSTATE). The declarations of the regsets thought they were the legacy i387 format. The code thought they were the 32-bit (no xmm8..15) variant of XSTATE and, for good measure, made the high bits disappear by zeroing the wrong part of the buffer. The latter broke ptrace, and everything else confused anyone trying to understand the code. In particular, the nonsense definitions of the regsets confused me when I wrote this code. Clean this all up. Change the declarations to match reality (which shouldn't change the generated code, let alone the ABI) and fix xfpregs_set() to clear the correct bits and to only do so for 32-bit callers. Fixes: 6164331d15f7 ("x86/fpu: Rewrite xfpregs_set()") Reported-by: Luís Ferreira Signed-off-by: Andy Lutomirski Signed-off-by: Borislav Petkov Cc: Link: https://bugzilla.kernel.org/show_bug.cgi?id=215524 Link: https://lore.kernel.org/r/YgpFnZpF01WwR8wU@zn.tnic --- arch/x86/kernel/fpu/regset.c | 9 ++++----- arch/x86/kernel/ptrace.c | 4 ++-- 2 files changed, 6 insertions(+), 7 deletions(-) diff --git a/arch/x86/kernel/fpu/regset.c b/arch/x86/kernel/fpu/regset.c index 437d7c930c0bdc..75ffaef8c29919 100644 --- a/arch/x86/kernel/fpu/regset.c +++ b/arch/x86/kernel/fpu/regset.c @@ -91,11 +91,9 @@ int xfpregs_set(struct task_struct *target, const struct user_regset *regset, const void *kbuf, const void __user *ubuf) { struct fpu *fpu = &target->thread.fpu; - struct user32_fxsr_struct newstate; + struct fxregs_state newstate; int ret; - BUILD_BUG_ON(sizeof(newstate) != sizeof(struct fxregs_state)); - if (!cpu_feature_enabled(X86_FEATURE_FXSR)) return -ENODEV; @@ -116,9 +114,10 @@ int xfpregs_set(struct task_struct *target, const struct user_regset *regset, /* Copy the state */ memcpy(&fpu->fpstate->regs.fxsave, &newstate, sizeof(newstate)); - /* Clear xmm8..15 */ + /* Clear xmm8..15 for 32-bit callers */ BUILD_BUG_ON(sizeof(fpu->__fpstate.regs.fxsave.xmm_space) != 16 * 16); - memset(&fpu->fpstate->regs.fxsave.xmm_space[8], 0, 8 * 16); + if (in_ia32_syscall()) + memset(&fpu->fpstate->regs.fxsave.xmm_space[8*4], 0, 8 * 16); /* Mark FP and SSE as in use when XSAVE is enabled */ if (use_xsave()) diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index 6d2244c94799cf..8d2f2f995539d7 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -1224,7 +1224,7 @@ static struct user_regset x86_64_regsets[] __ro_after_init = { }, [REGSET_FP] = { .core_note_type = NT_PRFPREG, - .n = sizeof(struct user_i387_struct) / sizeof(long), + .n = sizeof(struct fxregs_state) / sizeof(long), .size = sizeof(long), .align = sizeof(long), .active = regset_xregset_fpregs_active, .regset_get = xfpregs_get, .set = xfpregs_set }, @@ -1271,7 +1271,7 @@ static struct user_regset x86_32_regsets[] __ro_after_init = { }, [REGSET_XFP] = { .core_note_type = NT_PRXFPREG, - .n = sizeof(struct user32_fxsr_struct) / sizeof(u32), + .n = sizeof(struct fxregs_state) / sizeof(u32), .size = sizeof(u32), .align = sizeof(u32), .active = regset_xregset_fpregs_active, .regset_get = xfpregs_get, .set = xfpregs_set }, From efe4186e6a1b54bf38b9e05450d43b0da1fd7739 Mon Sep 17 00:00:00 2001 From: Duoming Zhou Date: Thu, 17 Feb 2022 09:43:03 +0800 Subject: [PATCH 296/493] drivers: hamradio: 6pack: fix UAF bug caused by mod_timer() When a 6pack device is detaching, the sixpack_close() will act to cleanup necessary resources. Although del_timer_sync() in sixpack_close() won't return if there is an active timer, one could use mod_timer() in sp_xmit_on_air() to wake up timer again by calling userspace syscall such as ax25_sendmsg(), ax25_connect() and ax25_ioctl(). This unexpected waked handler, sp_xmit_on_air(), realizes nothing about the undergoing cleanup and may still call pty_write() to use driver layer resources that have already been released. One of the possible race conditions is shown below: (USE) | (FREE) ax25_sendmsg() | ax25_queue_xmit() | ... | sp_xmit() | sp_encaps() | sixpack_close() sp_xmit_on_air() | del_timer_sync(&sp->tx_t) mod_timer(&sp->tx_t,...) | ... | unregister_netdev() | ... (wait a while) | tty_release() | tty_release_struct() | release_tty() sp_xmit_on_air() | tty_kref_put(tty_struct) //FREE pty_write(tty_struct) //USE | ... The corresponding fail log is shown below: =============================================================== BUG: KASAN: use-after-free in __run_timers.part.0+0x170/0x470 Write of size 8 at addr ffff88800a652ab8 by task swapper/2/0 ... Call Trace: ... queue_work_on+0x3f/0x50 pty_write+0xcd/0xe0pty_write+0xcd/0xe0 sp_xmit_on_air+0xb2/0x1f0 call_timer_fn+0x28/0x150 __run_timers.part.0+0x3c2/0x470 run_timer_softirq+0x3b/0x80 __do_softirq+0xf1/0x380 ... This patch reorders the del_timer_sync() after the unregister_netdev() to avoid UAF bugs. Because the unregister_netdev() is well synchronized, it flushs out any pending queues, waits the refcount of net_device decreases to zero and removes net_device from kernel. There is not any running routines after executing unregister_netdev(). Therefore, we could not arouse timer from userspace again. Signed-off-by: Duoming Zhou Reviewed-by: Lin Ma Signed-off-by: David S. Miller --- drivers/net/hamradio/6pack.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c index b1fc153125d9d3..45c3c4a1101b7f 100644 --- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -668,11 +668,11 @@ static void sixpack_close(struct tty_struct *tty) */ netif_stop_queue(sp->dev); + unregister_netdev(sp->dev); + del_timer_sync(&sp->tx_t); del_timer_sync(&sp->resync_t); - unregister_netdev(sp->dev); - /* Free all 6pack frame buffers after unreg. */ kfree(sp->rbuff); kfree(sp->xbuff); From 4224cfd7fb6523f7a9d1c8bb91bb5df1e38eb624 Mon Sep 17 00:00:00 2001 From: suresh kumar Date: Thu, 17 Feb 2022 07:25:18 +0530 Subject: [PATCH 297/493] net-sysfs: add check for netdevice being present to speed_show When bringing down the netdevice or system shutdown, a panic can be triggered while accessing the sysfs path because the device is already removed. [ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called [ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called ... [ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null) [ 758.031397] IP: [] dma_pool_alloc+0x1ab/0x280 crash> bt ... PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd" ... #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778 [exception RIP: dma_pool_alloc+0x1ab] RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090 RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00 R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0 R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core] #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core] #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core] #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core] #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core] #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core] #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core] #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46 #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208 #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3 #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596 #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10 #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5 #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92 crash> net_device.state ffff89443b0c0000 state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER) To prevent this scenario, we also make sure that the netdevice is present. Signed-off-by: suresh kumar Signed-off-by: David S. Miller --- net/core/net-sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c index 53ea262ecafd0c..fbddf966206b61 100644 --- a/net/core/net-sysfs.c +++ b/net/core/net-sysfs.c @@ -213,7 +213,7 @@ static ssize_t speed_show(struct device *dev, if (!rtnl_trylock()) return restart_syscall(); - if (netif_running(netdev)) { + if (netif_running(netdev) && netif_device_present(netdev)) { struct ethtool_link_ksettings cmd; if (!__ethtool_get_link_ksettings(netdev, &cmd)) From 2f131de361f6d0eaff17db26efdb844c178432f8 Mon Sep 17 00:00:00 2001 From: Paul Blakey Date: Thu, 17 Feb 2022 11:30:48 +0200 Subject: [PATCH 298/493] net/sched: act_ct: Fix flow table lookup after ct clear or switching zones Flow table lookup is skipped if packet either went through ct clear action (which set the IP_CT_UNTRACKED flag on the packet), or while switching zones and there is already a connection associated with the packet. This will result in no SW offload of the connection, and the and connection not being removed from flow table with TCP teardown (fin/rst packet). To fix the above, remove these unneccary checks in flow table lookup. Fixes: 46475bb20f4b ("net/sched: act_ct: Software offload of established flows") Signed-off-by: Paul Blakey Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller --- net/sched/act_ct.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/net/sched/act_ct.c b/net/sched/act_ct.c index f99247fc64682c..33e70d60f0bfb2 100644 --- a/net/sched/act_ct.c +++ b/net/sched/act_ct.c @@ -533,11 +533,6 @@ static bool tcf_ct_flow_table_lookup(struct tcf_ct_params *p, struct nf_conn *ct; u8 dir; - /* Previously seen or loopback */ - ct = nf_ct_get(skb, &ctinfo); - if ((ct && !nf_ct_is_template(ct)) || ctinfo == IP_CT_UNTRACKED) - return false; - switch (family) { case NFPROTO_IPV4: if (!tcf_ct_flow_table_fill_tuple_ipv4(skb, &tuple, &tcph)) From e9da0b56fe27206b49f39805f7dcda8a89379062 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 17 Feb 2022 14:10:44 +0100 Subject: [PATCH 299/493] sr9700: sanity check for packet length A malicious device can leak heap data to user space providing bogus frame lengths. Introduce a sanity check. Signed-off-by: Oliver Neukum Reviewed-by: Grant Grundler Signed-off-by: David S. Miller --- drivers/net/usb/sr9700.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/sr9700.c b/drivers/net/usb/sr9700.c index b658510cc9a42e..5a53e63d33a609 100644 --- a/drivers/net/usb/sr9700.c +++ b/drivers/net/usb/sr9700.c @@ -413,7 +413,7 @@ static int sr9700_rx_fixup(struct usbnet *dev, struct sk_buff *skb) /* ignore the CRC length */ len = (skb->data[1] | (skb->data[2] << 8)) - 4; - if (len > ETH_FRAME_LEN) + if (len > ETH_FRAME_LEN || len > skb->len) return 0; /* the last packet of current skb */ From a1cdec57e03a1352e92fbbe7974039dda4efcec0 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 17 Feb 2022 09:05:02 -0800 Subject: [PATCH 300/493] net-timestamp: convert sk->sk_tskey to atomic_t UDP sendmsg() can be lockless, this is causing all kinds of data races. This patch converts sk->sk_tskey to remove one of these races. BUG: KCSAN: data-race in __ip_append_data / __ip_append_data read to 0xffff8881035d4b6c of 4 bytes by task 8877 on cpu 1: __ip_append_data+0x1c1/0x1de0 net/ipv4/ip_output.c:994 ip_make_skb+0x13f/0x2d0 net/ipv4/ip_output.c:1636 udp_sendmsg+0x12bd/0x14c0 net/ipv4/udp.c:1249 inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmmsg+0x267/0x4c0 net/socket.c:2553 __do_sys_sendmmsg net/socket.c:2582 [inline] __se_sys_sendmmsg net/socket.c:2579 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae write to 0xffff8881035d4b6c of 4 bytes by task 8880 on cpu 0: __ip_append_data+0x1d8/0x1de0 net/ipv4/ip_output.c:994 ip_make_skb+0x13f/0x2d0 net/ipv4/ip_output.c:1636 udp_sendmsg+0x12bd/0x14c0 net/ipv4/udp.c:1249 inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmmsg+0x267/0x4c0 net/socket.c:2553 __do_sys_sendmmsg net/socket.c:2582 [inline] __se_sys_sendmmsg net/socket.c:2579 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000054d -> 0x0000054e Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 8880 Comm: syz-executor.5 Not tainted 5.17.0-rc2-syzkaller-00167-gdcb85f85fa6f-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 09c2d251b707 ("net-timestamp: add key to disambiguate concurrent datagrams") Signed-off-by: Eric Dumazet Cc: Willem de Bruijn Reported-by: syzbot Signed-off-by: David S. Miller --- include/net/sock.h | 4 ++-- net/can/j1939/transport.c | 2 +- net/core/skbuff.c | 2 +- net/core/sock.c | 4 ++-- net/ipv4/ip_output.c | 2 +- net/ipv6/ip6_output.c | 2 +- 6 files changed, 8 insertions(+), 8 deletions(-) diff --git a/include/net/sock.h b/include/net/sock.h index ff9b508d9c5ffc..50aecd28b35508 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -507,7 +507,7 @@ struct sock { #endif u16 sk_tsflags; u8 sk_shutdown; - u32 sk_tskey; + atomic_t sk_tskey; atomic_t sk_zckey; u8 sk_clockid; @@ -2667,7 +2667,7 @@ static inline void _sock_tx_timestamp(struct sock *sk, __u16 tsflags, __sock_tx_timestamp(tsflags, tx_flags); if (tsflags & SOF_TIMESTAMPING_OPT_ID && tskey && tsflags & SOF_TIMESTAMPING_TX_RECORD_MASK) - *tskey = sk->sk_tskey++; + *tskey = atomic_inc_return(&sk->sk_tskey) - 1; } if (unlikely(sock_flag(sk, SOCK_WIFI_STATUS))) *tx_flags |= SKBTX_WIFI_STATUS; diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c index a271688780a2c1..307ee1174a6e2e 100644 --- a/net/can/j1939/transport.c +++ b/net/can/j1939/transport.c @@ -2006,7 +2006,7 @@ struct j1939_session *j1939_tp_send(struct j1939_priv *priv, /* set the end-packet for broadcast */ session->pkt.last = session->pkt.total; - skcb->tskey = session->sk->sk_tskey++; + skcb->tskey = atomic_inc_return(&session->sk->sk_tskey) - 1; session->tskey = skcb->tskey; return session; diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 9d0388bed0c1d2..6a15ce3eb1d338 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -4730,7 +4730,7 @@ static void __skb_complete_tx_timestamp(struct sk_buff *skb, if (sk->sk_tsflags & SOF_TIMESTAMPING_OPT_ID) { serr->ee.ee_data = skb_shinfo(skb)->tskey; if (sk_is_tcp(sk)) - serr->ee.ee_data -= sk->sk_tskey; + serr->ee.ee_data -= atomic_read(&sk->sk_tskey); } err = sock_queue_err_skb(sk, skb); diff --git a/net/core/sock.c b/net/core/sock.c index 4ff806d7192161..6eb174805bf022 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -879,9 +879,9 @@ int sock_set_timestamping(struct sock *sk, int optname, if ((1 << sk->sk_state) & (TCPF_CLOSE | TCPF_LISTEN)) return -EINVAL; - sk->sk_tskey = tcp_sk(sk)->snd_una; + atomic_set(&sk->sk_tskey, tcp_sk(sk)->snd_una); } else { - sk->sk_tskey = 0; + atomic_set(&sk->sk_tskey, 0); } } diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index 139cec29ed06cd..7911916a480bd9 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -991,7 +991,7 @@ static int __ip_append_data(struct sock *sk, if (cork->tx_flags & SKBTX_ANY_SW_TSTAMP && sk->sk_tsflags & SOF_TIMESTAMPING_OPT_ID) - tskey = sk->sk_tskey++; + tskey = atomic_inc_return(&sk->sk_tskey) - 1; hh_len = LL_RESERVED_SPACE(rt->dst.dev); diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 2995f8d89e7e92..304a295de84f9c 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -1465,7 +1465,7 @@ static int __ip6_append_data(struct sock *sk, if (cork->tx_flags & SKBTX_ANY_SW_TSTAMP && sk->sk_tsflags & SOF_TIMESTAMPING_OPT_ID) - tskey = sk->sk_tskey++; + tskey = atomic_inc_return(&sk->sk_tskey) - 1; hh_len = LL_RESERVED_SPACE(rt->dst.dev); From b352c3465bb808ab700d03f5bac2f7a6f37c5350 Mon Sep 17 00:00:00 2001 From: Xiaoke Wang Date: Fri, 18 Feb 2022 10:19:39 +0800 Subject: [PATCH 301/493] net: ll_temac: check the return value of devm_kmalloc() devm_kmalloc() returns a pointer to allocated memory on success, NULL on failure. While lp->indirect_lock is allocated by devm_kmalloc() without proper check. It is better to check the value of it to prevent potential wrong memory access. Fixes: f14f5c11f051 ("net: ll_temac: Support indirect_mutex share within TEMAC IP") Signed-off-by: Xiaoke Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/xilinx/ll_temac_main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c index b900ab5aef2a8f..64c7e26c3b7548 100644 --- a/drivers/net/ethernet/xilinx/ll_temac_main.c +++ b/drivers/net/ethernet/xilinx/ll_temac_main.c @@ -1433,6 +1433,8 @@ static int temac_probe(struct platform_device *pdev) lp->indirect_lock = devm_kmalloc(&pdev->dev, sizeof(*lp->indirect_lock), GFP_KERNEL); + if (!lp->indirect_lock) + return -ENOMEM; spin_lock_init(lp->indirect_lock); } From f268088f65af69aa6ae1fb65e696cbb6478bcc9a Mon Sep 17 00:00:00 2001 From: John Garry Date: Fri, 18 Feb 2022 17:33:33 +0800 Subject: [PATCH 302/493] perf test: Skip failing sigtrap test for arm+aarch64 Skip the Sigtrap test for arm + arm64, same as was done for s390 in commit a840974e96fd ("perf test: Test 73 Sig_trap fails on s390"). For this, reuse BP_SIGNAL_IS_SUPPORTED - meaning that the arch can use BP to generate signals - instead of BP_ACCOUNT_IS_SUPPORTED, which is appropriate. As described by Will at [0], in the test we get stuck in a loop of handling the HW breakpoint exception and never making progress. GDB handles this by stepping over the faulting instruction, but with perf the kernel is expected to handle the step (which it doesn't for arm). Dmitry made an attempt to get this work, also mentioned in the same thread as [0], which was appreciated. But the best thing to do is skip the test for now. [0] https://lore.kernel.org/linux-perf-users/20220118124343.GC98966@leoy-ThinkPad-X240s/T/#m13b06c39d2a5100d340f009435df6f4d8ee57b5a Fixes: 5504f67944484495 ("perf test sigtrap: Add basic stress test for sigtrap handling") Signed-off-by: John Garry Tested-by: Leo Yan Acked-by: Marco Elver Cc: Dmitriy Vyukov Cc: Ian Rogers Cc: Ingo Molnar Cc: Jiri Olsa Cc: Marco Elver Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Thomas Richter Cc: Will Deacon Cc: linux-arm-kernel@lists.infradead.org Cc: linux@armlinux.org.uk Link: https://lore.kernel.org/r/1645176813-202756-1-git-send-email-john.garry@huawei.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/tests/sigtrap.c | 15 +-------------- 1 file changed, 1 insertion(+), 14 deletions(-) diff --git a/tools/perf/tests/sigtrap.c b/tools/perf/tests/sigtrap.c index 1f147fe6595f8c..e32ece90e164a2 100644 --- a/tools/perf/tests/sigtrap.c +++ b/tools/perf/tests/sigtrap.c @@ -22,19 +22,6 @@ #include "tests.h" #include "../perf-sys.h" -/* - * PowerPC and S390 do not support creation of instruction breakpoints using the - * perf_event interface. - * - * Just disable the test for these architectures until these issues are - * resolved. - */ -#if defined(__powerpc__) || defined(__s390x__) -#define BP_ACCOUNT_IS_SUPPORTED 0 -#else -#define BP_ACCOUNT_IS_SUPPORTED 1 -#endif - #define NUM_THREADS 5 static struct { @@ -135,7 +122,7 @@ static int test__sigtrap(struct test_suite *test __maybe_unused, int subtest __m char sbuf[STRERR_BUFSIZE]; int i, fd, ret = TEST_FAIL; - if (!BP_ACCOUNT_IS_SUPPORTED) { + if (!BP_SIGNAL_IS_SUPPORTED) { pr_debug("Test not supported on this architecture"); return TEST_SKIP; } From 8a3d2ee0de3828e0d01f9682d35ee53704659bd0 Mon Sep 17 00:00:00 2001 From: Zhengjun Xing Date: Fri, 18 Feb 2022 17:31:27 +0800 Subject: [PATCH 303/493] perf evlist: Fix failed to use cpu list for uncore events The 'perf record' and 'perf stat' commands have supported the option '-C/--cpus' to count or collect only on the list of CPUs provided. Commit 1d3351e631fc34d7 ("perf tools: Enable on a list of CPUs for hybrid") add it to be supported for hybrid. For hybrid support, it checks the cpu list are available on hybrid PMU. But when we test only uncore events(or events not in cpu_core and cpu_atom), there is a bug: Before: # perf stat -C0 -e uncore_clock/clockticks/ sleep 1 failed to use cpu list 0 In this case, for uncore event, its pmu_name is not cpu_core or cpu_atom, so in evlist__fix_hybrid_cpus, perf_pmu__find_hybrid_pmu should return NULL,both events_nr and unmatched_count should be 0 ,then the cpu list check function evlist__fix_hybrid_cpus return -1 and the error "failed to use cpu list 0" will happen. Bypass "events_nr=0" case then the issue is fixed. After: # perf stat -C0 -e uncore_clock/clockticks/ sleep 1 Performance counter stats for 'CPU(s) 0': 195,476,873 uncore_clock/clockticks/ 1.004518677 seconds time elapsed When testing with at least one core event and uncore events, it has no issue. # perf stat -C0 -e cpu_core/cpu-cycles/,uncore_clock/clockticks/ sleep 1 Performance counter stats for 'CPU(s) 0': 5,993,774 cpu_core/cpu-cycles/ 301,025,912 uncore_clock/clockticks/ 1.003964934 seconds time elapsed Fixes: 1d3351e631fc34d7 ("perf tools: Enable on a list of CPUs for hybrid") Reviewed-by: Kan Liang Signed-off-by: Zhengjun Xing Cc: Adrian Hunter Cc: alexander.shishkin@intel.com Cc: Andi Kleen Cc: Ian Rogers Cc: Jin Yao Cc: Jiri Olsa Cc: Peter Zijlstra Link: http://lore.kernel.org/lkml/20220218093127.1844241-1-zhengjun.xing@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/evlist-hybrid.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/perf/util/evlist-hybrid.c b/tools/perf/util/evlist-hybrid.c index 7f234215147d4b..57f02beef023c6 100644 --- a/tools/perf/util/evlist-hybrid.c +++ b/tools/perf/util/evlist-hybrid.c @@ -154,8 +154,8 @@ int evlist__fix_hybrid_cpus(struct evlist *evlist, const char *cpu_list) perf_cpu_map__put(matched_cpus); perf_cpu_map__put(unmatched_cpus); } - - ret = (unmatched_count == events_nr) ? -1 : 0; + if (events_nr) + ret = (unmatched_count == events_nr) ? -1 : 0; out: perf_cpu_map__put(cpus); return ret; From 8700af2cc18c919b2a83e74e0479038fd113c15d Mon Sep 17 00:00:00 2001 From: Md Haris Iqbal Date: Thu, 17 Feb 2022 04:09:28 +0100 Subject: [PATCH 304/493] RDMA/rtrs-clt: Fix possible double free in error case Callback function rtrs_clt_dev_release() for put_device() calls kfree(clt) to free memory. We shouldn't call kfree(clt) again, and we can't use the clt after kfree too. Replace device_register() with device_initialize() and device_add() so that dev_set_name can() be used appropriately. Move mutex_destroy() to the release function so it can be called in the alloc_clt err path. Fixes: eab098246625 ("RDMA/rtrs-clt: Refactor the failure cases in alloc_clt") Link: https://lore.kernel.org/r/20220217030929.323849-1-haris.iqbal@ionos.com Reported-by: Miaoqian Lin Signed-off-by: Md Haris Iqbal Reviewed-by: Jack Wang Signed-off-by: Jason Gunthorpe --- drivers/infiniband/ulp/rtrs/rtrs-clt.c | 37 ++++++++++++++------------ 1 file changed, 20 insertions(+), 17 deletions(-) diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt.c b/drivers/infiniband/ulp/rtrs/rtrs-clt.c index 7c3f98e57889f8..6164b07a164427 100644 --- a/drivers/infiniband/ulp/rtrs/rtrs-clt.c +++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.c @@ -2682,6 +2682,8 @@ static void rtrs_clt_dev_release(struct device *dev) struct rtrs_clt_sess *clt = container_of(dev, struct rtrs_clt_sess, dev); + mutex_destroy(&clt->paths_ev_mutex); + mutex_destroy(&clt->paths_mutex); kfree(clt); } @@ -2711,6 +2713,8 @@ static struct rtrs_clt_sess *alloc_clt(const char *sessname, size_t paths_num, return ERR_PTR(-ENOMEM); } + clt->dev.class = rtrs_clt_dev_class; + clt->dev.release = rtrs_clt_dev_release; uuid_gen(&clt->paths_uuid); INIT_LIST_HEAD_RCU(&clt->paths_list); clt->paths_num = paths_num; @@ -2727,43 +2731,41 @@ static struct rtrs_clt_sess *alloc_clt(const char *sessname, size_t paths_num, init_waitqueue_head(&clt->permits_wait); mutex_init(&clt->paths_ev_mutex); mutex_init(&clt->paths_mutex); + device_initialize(&clt->dev); - clt->dev.class = rtrs_clt_dev_class; - clt->dev.release = rtrs_clt_dev_release; err = dev_set_name(&clt->dev, "%s", sessname); if (err) - goto err; + goto err_put; + /* * Suppress user space notification until * sysfs files are created */ dev_set_uevent_suppress(&clt->dev, true); - err = device_register(&clt->dev); - if (err) { - put_device(&clt->dev); - goto err; - } + err = device_add(&clt->dev); + if (err) + goto err_put; clt->kobj_paths = kobject_create_and_add("paths", &clt->dev.kobj); if (!clt->kobj_paths) { err = -ENOMEM; - goto err_dev; + goto err_del; } err = rtrs_clt_create_sysfs_root_files(clt); if (err) { kobject_del(clt->kobj_paths); kobject_put(clt->kobj_paths); - goto err_dev; + goto err_del; } dev_set_uevent_suppress(&clt->dev, false); kobject_uevent(&clt->dev.kobj, KOBJ_ADD); return clt; -err_dev: - device_unregister(&clt->dev); -err: +err_del: + device_del(&clt->dev); +err_put: free_percpu(clt->pcpu_path); - kfree(clt); + put_device(&clt->dev); return ERR_PTR(err); } @@ -2771,9 +2773,10 @@ static void free_clt(struct rtrs_clt_sess *clt) { free_permits(clt); free_percpu(clt->pcpu_path); - mutex_destroy(&clt->paths_ev_mutex); - mutex_destroy(&clt->paths_mutex); - /* release callback will free clt in last put */ + + /* + * release callback will free clt and destroy mutexes in last put + */ device_unregister(&clt->dev); } From c46fa8911b17e3f808679061a8af8bee219f4602 Mon Sep 17 00:00:00 2001 From: Md Haris Iqbal Date: Thu, 17 Feb 2022 04:09:29 +0100 Subject: [PATCH 305/493] RDMA/rtrs-clt: Move free_permit from free_clt to rtrs_clt_close Error path of rtrs_clt_open() calls free_clt(), where free_permit is called. This is wrong since error path of rtrs_clt_open() does not need to call free_permit(). Also, moving free_permits() call to rtrs_clt_close(), makes it more aligned with the call to alloc_permit() in rtrs_clt_open(). Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality") Link: https://lore.kernel.org/r/20220217030929.323849-2-haris.iqbal@ionos.com Signed-off-by: Md Haris Iqbal Reviewed-by: Jack Wang Signed-off-by: Jason Gunthorpe --- drivers/infiniband/ulp/rtrs/rtrs-clt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt.c b/drivers/infiniband/ulp/rtrs/rtrs-clt.c index 6164b07a164427..759b85f033315d 100644 --- a/drivers/infiniband/ulp/rtrs/rtrs-clt.c +++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.c @@ -2771,7 +2771,6 @@ static struct rtrs_clt_sess *alloc_clt(const char *sessname, size_t paths_num, static void free_clt(struct rtrs_clt_sess *clt) { - free_permits(clt); free_percpu(clt->pcpu_path); /* @@ -2893,6 +2892,7 @@ void rtrs_clt_close(struct rtrs_clt_sess *clt) rtrs_clt_destroy_path_files(clt_path, NULL); kobject_put(&clt_path->kobj); } + free_permits(clt); free_clt(clt); } EXPORT_SYMBOL(rtrs_clt_close); From b70bc066d77b460a63a8c3fb2ea0d811ce862a83 Mon Sep 17 00:00:00 2001 From: Wojciech Drewek Date: Fri, 17 Dec 2021 12:36:25 +0100 Subject: [PATCH 306/493] ice: Match on all profiles in slow-path In switchdev mode, slow-path rules need to match all protocols, in order to correctly redirect unfiltered or missed packets to the uplink. To set this up for the virtual function to uplink flow, the rule that redirects packets to the control VSI must have the tunnel type set to ICE_SW_TUN_AND_NON_TUN. As a result of that new tunnel type being set, ice_get_compat_fv_bitmap will select ICE_PROF_ALL. At that point all profiles would be selected for this rule, resulting in the desired behavior. Without this change slow-path would not work with tunnel protocols. Fixes: 8b032a55c1bd ("ice: low level support for tunnels") Signed-off-by: Wojciech Drewek Tested-by: Sandeep Penigalapati Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_eswitch.c | 1 + drivers/net/ethernet/intel/ice/ice_protocol_type.h | 1 + drivers/net/ethernet/intel/ice/ice_switch.c | 4 +++- 3 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/ice/ice_eswitch.c b/drivers/net/ethernet/intel/ice/ice_eswitch.c index 864692b157b6f8..73edc24d81d546 100644 --- a/drivers/net/ethernet/intel/ice/ice_eswitch.c +++ b/drivers/net/ethernet/intel/ice/ice_eswitch.c @@ -44,6 +44,7 @@ ice_eswitch_add_vf_mac_rule(struct ice_pf *pf, struct ice_vf *vf, const u8 *mac) ctrl_vsi->rxq_map[vf->vf_id]; rule_info.flags_info.act |= ICE_SINGLE_ACT_LB_ENABLE; rule_info.flags_info.act_valid = true; + rule_info.tun_type = ICE_SW_TUN_AND_NON_TUN; err = ice_add_adv_rule(hw, list, lkups_cnt, &rule_info, vf->repr->mac_rule); diff --git a/drivers/net/ethernet/intel/ice/ice_protocol_type.h b/drivers/net/ethernet/intel/ice/ice_protocol_type.h index dc1b0e9e6df5fd..695b6dd61dc27e 100644 --- a/drivers/net/ethernet/intel/ice/ice_protocol_type.h +++ b/drivers/net/ethernet/intel/ice/ice_protocol_type.h @@ -47,6 +47,7 @@ enum ice_protocol_type { enum ice_sw_tunnel_type { ICE_NON_TUN = 0, + ICE_SW_TUN_AND_NON_TUN, ICE_SW_TUN_VXLAN, ICE_SW_TUN_GENEVE, ICE_SW_TUN_NVGRE, diff --git a/drivers/net/ethernet/intel/ice/ice_switch.c b/drivers/net/ethernet/intel/ice/ice_switch.c index 11ae0bee3590fe..475ec2afa210b1 100644 --- a/drivers/net/ethernet/intel/ice/ice_switch.c +++ b/drivers/net/ethernet/intel/ice/ice_switch.c @@ -4537,6 +4537,7 @@ ice_get_compat_fv_bitmap(struct ice_hw *hw, struct ice_adv_rule_info *rinfo, case ICE_SW_TUN_NVGRE: prof_type = ICE_PROF_TUN_GRE; break; + case ICE_SW_TUN_AND_NON_TUN: default: prof_type = ICE_PROF_ALL; break; @@ -5305,7 +5306,8 @@ ice_add_adv_rule(struct ice_hw *hw, struct ice_adv_lkup_elem *lkups, if (status) goto err_ice_add_adv_rule; - if (rinfo->tun_type != ICE_NON_TUN) { + if (rinfo->tun_type != ICE_NON_TUN && + rinfo->tun_type != ICE_SW_TUN_AND_NON_TUN) { status = ice_fill_adv_packet_tun(hw, rinfo->tun_type, s_rule->pdata.lkup_tx_rx.hdr, pkt_offsets); From 932645c298c41aad64ef13016ff4c2034eef5aed Mon Sep 17 00:00:00 2001 From: Michal Swiatkowski Date: Mon, 3 Jan 2022 07:41:21 +0100 Subject: [PATCH 307/493] ice: fix setting l4 port flag when adding filter Accidentally filter flag for none encapsulated l4 port field is always set. Even if user wants to add encapsulated l4 port field. Remove this unnecessary flag setting. Fixes: 9e300987d4a81 ("ice: VXLAN and Geneve TC support") Signed-off-by: Michal Swiatkowski Tested-by: Sandeep Penigalapati Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_tc_lib.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/ice/ice_tc_lib.c b/drivers/net/ethernet/intel/ice/ice_tc_lib.c index e8aab664270ac6..65cf32eb404665 100644 --- a/drivers/net/ethernet/intel/ice/ice_tc_lib.c +++ b/drivers/net/ethernet/intel/ice/ice_tc_lib.c @@ -709,7 +709,7 @@ ice_tc_set_port(struct flow_match_ports match, fltr->flags |= ICE_TC_FLWR_FIELD_ENC_DEST_L4_PORT; else fltr->flags |= ICE_TC_FLWR_FIELD_DEST_L4_PORT; - fltr->flags |= ICE_TC_FLWR_FIELD_DEST_L4_PORT; + headers->l4_key.dst_port = match.key->dst; headers->l4_mask.dst_port = match.mask->dst; } @@ -718,7 +718,7 @@ ice_tc_set_port(struct flow_match_ports match, fltr->flags |= ICE_TC_FLWR_FIELD_ENC_SRC_L4_PORT; else fltr->flags |= ICE_TC_FLWR_FIELD_SRC_L4_PORT; - fltr->flags |= ICE_TC_FLWR_FIELD_SRC_L4_PORT; + headers->l4_key.src_port = match.key->src; headers->l4_mask.src_port = match.mask->src; } From fadead80fe4c033b5e514fcbadd20b55c4494112 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Mon, 7 Feb 2022 10:23:29 -0800 Subject: [PATCH 308/493] ice: fix concurrent reset and removal of VFs Commit c503e63200c6 ("ice: Stop processing VF messages during teardown") introduced a driver state flag, ICE_VF_DEINIT_IN_PROGRESS, which is intended to prevent some issues with concurrently handling messages from VFs while tearing down the VFs. This change was motivated by crashes caused while tearing down and bringing up VFs in rapid succession. It turns out that the fix actually introduces issues with the VF driver caused because the PF no longer responds to any messages sent by the VF during its .remove routine. This results in the VF potentially removing its DMA memory before the PF has shut down the device queues. Additionally, the fix doesn't actually resolve concurrency issues within the ice driver. It is possible for a VF to initiate a reset just prior to the ice driver removing VFs. This can result in the remove task concurrently operating while the VF is being reset. This results in similar memory corruption and panics purportedly fixed by that commit. Fix this concurrency at its root by protecting both the reset and removal flows using the existing VF cfg_lock. This ensures that we cannot remove the VF while any outstanding critical tasks such as a virtchnl message or a reset are occurring. This locking change also fixes the root cause originally fixed by commit c503e63200c6 ("ice: Stop processing VF messages during teardown"), so we can simply revert it. Note that I kept these two changes together because simply reverting the original commit alone would leave the driver vulnerable to worse race conditions. Fixes: c503e63200c6 ("ice: Stop processing VF messages during teardown") Signed-off-by: Jacob Keller Tested-by: Konrad Jankowski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice.h | 1 - drivers/net/ethernet/intel/ice/ice_main.c | 2 + .../net/ethernet/intel/ice/ice_virtchnl_pf.c | 42 +++++++++++-------- 3 files changed, 27 insertions(+), 18 deletions(-) diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h index a9fa701aaa9519..473b1f6be9de1b 100644 --- a/drivers/net/ethernet/intel/ice/ice.h +++ b/drivers/net/ethernet/intel/ice/ice.h @@ -280,7 +280,6 @@ enum ice_pf_state { ICE_VFLR_EVENT_PENDING, ICE_FLTR_OVERFLOW_PROMISC, ICE_VF_DIS, - ICE_VF_DEINIT_IN_PROGRESS, ICE_CFG_BUSY, ICE_SERVICE_SCHED, ICE_SERVICE_DIS, diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index 17a9bb461dc3a3..f3c346e13b7a4e 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -1799,7 +1799,9 @@ static void ice_handle_mdd_event(struct ice_pf *pf) * reset, so print the event prior to reset. */ ice_print_vf_rx_mdd_event(vf); + mutex_lock(&pf->vf[i].cfg_lock); ice_reset_vf(&pf->vf[i], false); + mutex_unlock(&pf->vf[i].cfg_lock); } } } diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c index 39b80124d28272..408f78e3eb1382 100644 --- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c @@ -500,8 +500,6 @@ void ice_free_vfs(struct ice_pf *pf) struct ice_hw *hw = &pf->hw; unsigned int tmp, i; - set_bit(ICE_VF_DEINIT_IN_PROGRESS, pf->state); - if (!pf->vf) return; @@ -519,22 +517,26 @@ void ice_free_vfs(struct ice_pf *pf) else dev_warn(dev, "VFs are assigned - not disabling SR-IOV\n"); - /* Avoid wait time by stopping all VFs at the same time */ - ice_for_each_vf(pf, i) - ice_dis_vf_qs(&pf->vf[i]); - tmp = pf->num_alloc_vfs; pf->num_qps_per_vf = 0; pf->num_alloc_vfs = 0; for (i = 0; i < tmp; i++) { - if (test_bit(ICE_VF_STATE_INIT, pf->vf[i].vf_states)) { + struct ice_vf *vf = &pf->vf[i]; + + mutex_lock(&vf->cfg_lock); + + ice_dis_vf_qs(vf); + + if (test_bit(ICE_VF_STATE_INIT, vf->vf_states)) { /* disable VF qp mappings and set VF disable state */ - ice_dis_vf_mappings(&pf->vf[i]); - set_bit(ICE_VF_STATE_DIS, pf->vf[i].vf_states); - ice_free_vf_res(&pf->vf[i]); + ice_dis_vf_mappings(vf); + set_bit(ICE_VF_STATE_DIS, vf->vf_states); + ice_free_vf_res(vf); } - mutex_destroy(&pf->vf[i].cfg_lock); + mutex_unlock(&vf->cfg_lock); + + mutex_destroy(&vf->cfg_lock); } if (ice_sriov_free_msix_res(pf)) @@ -570,7 +572,6 @@ void ice_free_vfs(struct ice_pf *pf) i); clear_bit(ICE_VF_DIS, pf->state); - clear_bit(ICE_VF_DEINIT_IN_PROGRESS, pf->state); clear_bit(ICE_FLAG_SRIOV_ENA, pf->flags); } @@ -1498,6 +1499,8 @@ bool ice_reset_all_vfs(struct ice_pf *pf, bool is_vflr) ice_for_each_vf(pf, v) { vf = &pf->vf[v]; + mutex_lock(&vf->cfg_lock); + vf->driver_caps = 0; ice_vc_set_default_allowlist(vf); @@ -1512,6 +1515,8 @@ bool ice_reset_all_vfs(struct ice_pf *pf, bool is_vflr) ice_vf_pre_vsi_rebuild(vf); ice_vf_rebuild_vsi(vf); ice_vf_post_vsi_rebuild(vf); + + mutex_unlock(&vf->cfg_lock); } if (ice_is_eswitch_mode_switchdev(pf)) @@ -1562,6 +1567,8 @@ bool ice_reset_vf(struct ice_vf *vf, bool is_vflr) u32 reg; int i; + lockdep_assert_held(&vf->cfg_lock); + dev = ice_pf_to_dev(pf); if (test_bit(ICE_VF_RESETS_DISABLED, pf->state)) { @@ -2061,9 +2068,12 @@ void ice_process_vflr_event(struct ice_pf *pf) bit_idx = (hw->func_caps.vf_base_id + vf_id) % 32; /* read GLGEN_VFLRSTAT register to find out the flr VFs */ reg = rd32(hw, GLGEN_VFLRSTAT(reg_idx)); - if (reg & BIT(bit_idx)) + if (reg & BIT(bit_idx)) { /* GLGEN_VFLRSTAT bit will be cleared in ice_reset_vf */ + mutex_lock(&vf->cfg_lock); ice_reset_vf(vf, true); + mutex_unlock(&vf->cfg_lock); + } } } @@ -2140,7 +2150,9 @@ ice_vf_lan_overflow_event(struct ice_pf *pf, struct ice_rq_event_info *event) if (!vf) return; + mutex_lock(&vf->cfg_lock); ice_vc_reset_vf(vf); + mutex_unlock(&vf->cfg_lock); } /** @@ -4625,10 +4637,6 @@ void ice_vc_process_vf_msg(struct ice_pf *pf, struct ice_rq_event_info *event) struct device *dev; int err = 0; - /* if de-init is underway, don't process messages from VF */ - if (test_bit(ICE_VF_DEINIT_IN_PROGRESS, pf->state)) - return; - dev = ice_pf_to_dev(pf); if (ice_validate_vf_id(pf, vf_id)) { err = -EINVAL; From ed22d9c8d128293fc7b0b086c7d3654bcb99a8dd Mon Sep 17 00:00:00 2001 From: Tom Rix Date: Mon, 14 Feb 2022 06:33:27 -0800 Subject: [PATCH 309/493] ice: check the return of ice_ptp_gettimex64 Clang static analysis reports this issue time64.h:69:50: warning: The left operand of '+' is a garbage value set_normalized_timespec64(&ts_delta, lhs.tv_sec + rhs.tv_sec, ~~~~~~~~~~ ^ In ice_ptp_adjtime_nonatomic(), the timespec64 variable 'now' is set by ice_ptp_gettimex64(). This function can fail with -EBUSY, so 'now' can have a gargbage value. So check the return. Fixes: 06c16d89d2cb ("ice: register 1588 PTP clock device object for E810 devices") Signed-off-by: Tom Rix Tested-by: Gurucharan G (A Contingent worker at Intel) Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_ptp.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/ice/ice_ptp.c b/drivers/net/ethernet/intel/ice/ice_ptp.c index ae291d44253971..000c39d163a28e 100644 --- a/drivers/net/ethernet/intel/ice/ice_ptp.c +++ b/drivers/net/ethernet/intel/ice/ice_ptp.c @@ -1533,9 +1533,12 @@ ice_ptp_settime64(struct ptp_clock_info *info, const struct timespec64 *ts) static int ice_ptp_adjtime_nonatomic(struct ptp_clock_info *info, s64 delta) { struct timespec64 now, then; + int ret; then = ns_to_timespec64(delta); - ice_ptp_gettimex64(info, &now, NULL); + ret = ice_ptp_gettimex64(info, &now, NULL); + if (ret) + return ret; now = timespec64_add(now, then); return ice_ptp_settime64(info, (const struct timespec64 *)&now); From 5950bdc88dd1d158f2845fdff8fb1de86476806c Mon Sep 17 00:00:00 2001 From: Tom Rix Date: Mon, 14 Feb 2022 07:40:43 -0800 Subject: [PATCH 310/493] ice: initialize local variable 'tlv' Clang static analysis reports this issues ice_common.c:5008:21: warning: The left expression of the compound assignment is an uninitialized value. The computed value will also be garbage ldo->phy_type_low |= ((u64)buf << (i * 16)); ~~~~~~~~~~~~~~~~~ ^ When called from ice_cfg_phy_fec() ldo is the uninitialized local variable tlv. So initialize. Fixes: ea78ce4dab05 ("ice: add link lenient and default override support") Signed-off-by: Tom Rix Tested-by: Gurucharan G (A Contingent worker at Intel) Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c index a6d7d3eff18684..e2af99a763ed53 100644 --- a/drivers/net/ethernet/intel/ice/ice_common.c +++ b/drivers/net/ethernet/intel/ice/ice_common.c @@ -3340,7 +3340,7 @@ ice_cfg_phy_fec(struct ice_port_info *pi, struct ice_aqc_set_phy_cfg_data *cfg, if (fec == ICE_FEC_AUTO && ice_fw_supports_link_override(hw) && !ice_fw_supports_report_dflt_cfg(hw)) { - struct ice_link_default_override_tlv tlv; + struct ice_link_default_override_tlv tlv = { 0 }; status = ice_get_link_default_override(&tlv, pi); if (status) From 7b1f781f2d2460693f43d5f764198df558e3494b Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 15 Feb 2022 13:32:26 -0800 Subject: [PATCH 311/493] Input: psmouse - set up dependency between PS/2 and SMBus companions When we switch from emulated PS/2 to native (RMI4 or Elan) protocols, we create SMBus companion devices that are attached to I2C/SMBus controllers. However, when suspending and resuming, we also need to make sure that we take into account the PS/2 device they are associated with, so that PS/2 device is suspended after the companion and resumed before it, otherwise companions will not work properly. Before I2C devices were marked for asynchronous suspend/resume, this ordering happened naturally, but now we need to enforce it by establishing device links, with PS/2 devices being suppliers and SMBus companions being consumers. Fixes: 172d931910e1 ("i2c: enable async suspend/resume on i2c client devices") Reported-and-tested-by: Hugh Dickins Tested-by: Jarkko Nikula Link: https://lore.kernel.org/r/89456fcd-a113-4c82-4b10-a9bcaefac68f@google.com Link: https://lore.kernel.org/r/YgwQN8ynO88CPMju@google.com Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/psmouse-smbus.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/input/mouse/psmouse-smbus.c b/drivers/input/mouse/psmouse-smbus.c index a472489ccbad68..164f6c757f6bed 100644 --- a/drivers/input/mouse/psmouse-smbus.c +++ b/drivers/input/mouse/psmouse-smbus.c @@ -75,6 +75,8 @@ static void psmouse_smbus_detach_i2c_client(struct i2c_client *client) "Marking SMBus companion %s as gone\n", dev_name(&smbdev->client->dev)); smbdev->dead = true; + device_link_remove(&smbdev->client->dev, + &smbdev->psmouse->ps2dev.serio->dev); serio_rescan(smbdev->psmouse->ps2dev.serio); } else { list_del(&smbdev->node); @@ -174,6 +176,8 @@ static void psmouse_smbus_disconnect(struct psmouse *psmouse) kfree(smbdev); } else { smbdev->dead = true; + device_link_remove(&smbdev->client->dev, + &psmouse->ps2dev.serio->dev); psmouse_dbg(smbdev->psmouse, "posting removal request for SMBus companion %s\n", dev_name(&smbdev->client->dev)); @@ -270,6 +274,12 @@ int psmouse_smbus_init(struct psmouse *psmouse, if (smbdev->client) { /* We have our companion device */ + if (!device_link_add(&smbdev->client->dev, + &psmouse->ps2dev.serio->dev, + DL_FLAG_STATELESS)) + psmouse_warn(psmouse, + "failed to set up link with iSMBus companion %s\n", + dev_name(&smbdev->client->dev)); return 0; } From 64fd52a4d3ce63a327948cefc8e4e5c7ef35e813 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 11 Feb 2022 09:23:45 +0000 Subject: [PATCH 312/493] pinctrl: starfive: Use a static name for the GPIO irq_chip Drop the device name used for the GPIO irq_chip and replace it with something static. The information is still available from debugfs and carried as part of the irqdomain. Suggested-by: Emil Renner Berthing Signed-off-by: Marc Zyngier Cc: Linus Walleij Cc: Bartosz Golaszewski Link: https://lore.kernel.org/r/20220211092345.1093332-1-maz@kernel.org Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-starfive.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinctrl-starfive.c b/drivers/pinctrl/pinctrl-starfive.c index 0b912152a405a2..266da41a616265 100644 --- a/drivers/pinctrl/pinctrl-starfive.c +++ b/drivers/pinctrl/pinctrl-starfive.c @@ -1164,6 +1164,7 @@ static int starfive_irq_set_type(struct irq_data *d, unsigned int trigger) } static struct irq_chip starfive_irq_chip = { + .name = "StarFive GPIO", .irq_ack = starfive_irq_ack, .irq_mask = starfive_irq_mask, .irq_mask_ack = starfive_irq_mask_ack, @@ -1308,7 +1309,6 @@ static int starfive_probe(struct platform_device *pdev) sfp->gc.ngpio = NR_GPIOS; starfive_irq_chip.parent_device = dev; - starfive_irq_chip.name = sfp->gc.label; sfp->gc.irq.chip = &starfive_irq_chip; sfp->gc.irq.parent_handler = starfive_gpio_irq_handler; From d1e972ace42390de739cde87d96043dcbe502286 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 11 Feb 2022 09:39:04 +0000 Subject: [PATCH 313/493] gpio: tegra186: Fix chip_data type confusion The tegra186 GPIO driver makes the assumption that the pointer returned by irq_data_get_irq_chip_data() is a pointer to a tegra_gpio structure. Unfortunately, it is actually a pointer to the inner gpio_chip structure, as mandated by the gpiolib infrastructure. Nice try. The saving grace is that the gpio_chip is the first member of tegra_gpio, so the bug has gone undetected since... forever. Fix it by performing a container_of() on the pointer. This results in no additional code, and makes it possible to understand how the whole thing works. Fixes: 5b2b135a87fc ("gpio: Add Tegra186 support") Signed-off-by: Marc Zyngier Cc: Thierry Reding Cc: Linus Walleij Cc: Bartosz Golaszewski Link: https://lore.kernel.org/r/20220211093904.1112679-1-maz@kernel.org Signed-off-by: Linus Walleij --- drivers/gpio/gpio-tegra186.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/gpio/gpio-tegra186.c b/drivers/gpio/gpio-tegra186.c index 34b36a8c035f58..8d298beffd86f1 100644 --- a/drivers/gpio/gpio-tegra186.c +++ b/drivers/gpio/gpio-tegra186.c @@ -343,9 +343,12 @@ static int tegra186_gpio_of_xlate(struct gpio_chip *chip, return offset + pin; } +#define to_tegra_gpio(x) container_of((x), struct tegra_gpio, gpio) + static void tegra186_irq_ack(struct irq_data *data) { - struct tegra_gpio *gpio = irq_data_get_irq_chip_data(data); + struct gpio_chip *gc = irq_data_get_irq_chip_data(data); + struct tegra_gpio *gpio = to_tegra_gpio(gc); void __iomem *base; base = tegra186_gpio_get_base(gpio, data->hwirq); @@ -357,7 +360,8 @@ static void tegra186_irq_ack(struct irq_data *data) static void tegra186_irq_mask(struct irq_data *data) { - struct tegra_gpio *gpio = irq_data_get_irq_chip_data(data); + struct gpio_chip *gc = irq_data_get_irq_chip_data(data); + struct tegra_gpio *gpio = to_tegra_gpio(gc); void __iomem *base; u32 value; @@ -372,7 +376,8 @@ static void tegra186_irq_mask(struct irq_data *data) static void tegra186_irq_unmask(struct irq_data *data) { - struct tegra_gpio *gpio = irq_data_get_irq_chip_data(data); + struct gpio_chip *gc = irq_data_get_irq_chip_data(data); + struct tegra_gpio *gpio = to_tegra_gpio(gc); void __iomem *base; u32 value; @@ -387,7 +392,8 @@ static void tegra186_irq_unmask(struct irq_data *data) static int tegra186_irq_set_type(struct irq_data *data, unsigned int type) { - struct tegra_gpio *gpio = irq_data_get_irq_chip_data(data); + struct gpio_chip *gc = irq_data_get_irq_chip_data(data); + struct tegra_gpio *gpio = to_tegra_gpio(gc); void __iomem *base; u32 value; From 5a2aba71cd2610d3ed08867a1b1bf617cd8f89b8 Mon Sep 17 00:00:00 2001 From: Jeremy Linton Date: Mon, 14 Feb 2022 17:18:52 -0600 Subject: [PATCH 314/493] net: mvpp2: always set port pcs ops Booting a MACCHIATObin with 5.17, the system OOPs with a null pointer deref when the network is started. This is caused by the pcs->ops structure being null in mcpp2_acpi_start() when it tries to call pcs_config(). Hoisting the code which sets pcs_gmac.ops and pcs_xlg.ops, assuring they are always set, fixes the problem. The OOPs looks like: [ 18.687760] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000010 [ 18.698561] Mem abort info: [ 18.698564] ESR = 0x96000004 [ 18.698567] EC = 0x25: DABT (current EL), IL = 32 bits [ 18.709821] SET = 0, FnV = 0 [ 18.714292] EA = 0, S1PTW = 0 [ 18.718833] FSC = 0x04: level 0 translation fault [ 18.725126] Data abort info: [ 18.729408] ISV = 0, ISS = 0x00000004 [ 18.734655] CM = 0, WnR = 0 [ 18.738933] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000111bbf000 [ 18.745409] [0000000000000010] pgd=0000000000000000, p4d=0000000000000000 [ 18.752235] Internal error: Oops: 96000004 [#1] SMP [ 18.757134] Modules linked in: rfkill ip_set nf_tables nfnetlink qrtr sunrpc vfat fat omap_rng fuse zram xfs crct10dif_ce mvpp2 ghash_ce sbsa_gwdt phylink xhci_plat_hcd ahci_plam [ 18.773481] CPU: 0 PID: 681 Comm: NetworkManager Not tainted 5.17.0-0.rc3.89.fc36.aarch64 #1 [ 18.781954] Hardware name: Marvell Armada 7k/8k Family Board /Armada 7k/8k Family Board , BIOS EDK II Jun 4 2019 [ 18.795222] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 18.802213] pc : mvpp2_start_dev+0x2b0/0x300 [mvpp2] [ 18.807208] lr : mvpp2_start_dev+0x298/0x300 [mvpp2] [ 18.812197] sp : ffff80000b4732c0 [ 18.815522] x29: ffff80000b4732c0 x28: 0000000000000000 x27: ffffccab38ae57f8 [ 18.822689] x26: ffff6eeb03065a10 x25: ffff80000b473a30 x24: ffff80000b4735b8 [ 18.829855] x23: 0000000000000000 x22: 00000000000001e0 x21: ffff6eeb07b6ab68 [ 18.837021] x20: ffff6eeb07b6ab30 x19: ffff6eeb07b6a9c0 x18: 0000000000000014 [ 18.844187] x17: 00000000f6232bfe x16: ffffccab899b1dc0 x15: 000000006a30f9fa [ 18.851353] x14: 000000003b77bd50 x13: 000006dc896f0e8e x12: 001bbbfccfd0d3a2 [ 18.858519] x11: 0000000000001528 x10: 0000000000001548 x9 : ffffccab38ad0fb0 [ 18.865685] x8 : ffff80000b473330 x7 : 0000000000000000 x6 : 0000000000000000 [ 18.872851] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff80000b4732f8 [ 18.880017] x2 : 000000000000001a x1 : 0000000000000002 x0 : ffff6eeb07b6ab68 [ 18.887183] Call trace: [ 18.889637] mvpp2_start_dev+0x2b0/0x300 [mvpp2] [ 18.894279] mvpp2_open+0x134/0x2b4 [mvpp2] [ 18.898483] __dev_open+0x128/0x1e4 [ 18.901988] __dev_change_flags+0x17c/0x1d0 [ 18.906187] dev_change_flags+0x30/0x70 [ 18.910038] do_setlink+0x278/0xa7c [ 18.913540] __rtnl_newlink+0x44c/0x7d0 [ 18.917391] rtnl_newlink+0x5c/0x8c [ 18.920892] rtnetlink_rcv_msg+0x254/0x314 [ 18.925006] netlink_rcv_skb+0x48/0x10c [ 18.928858] rtnetlink_rcv+0x24/0x30 [ 18.932449] netlink_unicast+0x290/0x2f4 [ 18.936386] netlink_sendmsg+0x1d0/0x41c [ 18.940323] sock_sendmsg+0x60/0x70 [ 18.943825] ____sys_sendmsg+0x248/0x260 [ 18.947762] ___sys_sendmsg+0x74/0xa0 [ 18.951438] __sys_sendmsg+0x64/0xcc [ 18.955027] __arm64_sys_sendmsg+0x30/0x40 [ 18.959140] invoke_syscall+0x50/0x120 [ 18.962906] el0_svc_common.constprop.0+0x4c/0xf4 [ 18.967629] do_el0_svc+0x30/0x9c [ 18.970958] el0_svc+0x28/0xb0 [ 18.974025] el0t_64_sync_handler+0x10c/0x140 [ 18.978400] el0t_64_sync+0x1a4/0x1a8 [ 18.982078] Code: 52800004 b9416262 aa1503e0 52800041 (f94008a5) [ 18.988196] ---[ end trace 0000000000000000 ]--- Fixes: cff056322372 ("net: mvpp2: use .mac_select_pcs() interface") Suggested-by: Russell King (Oracle) Signed-off-by: Jeremy Linton Reviewed-by: Marcin Wojtas Link: https://lore.kernel.org/r/20220214231852.3331430-1-jeremy.linton@arm.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c index 7cdbf8b8bbf6c5..1a835b48791beb 100644 --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c @@ -6870,6 +6870,9 @@ static int mvpp2_port_probe(struct platform_device *pdev, dev->max_mtu = MVPP2_BM_JUMBO_PKT_SIZE; dev->dev.of_node = port_node; + port->pcs_gmac.ops = &mvpp2_phylink_gmac_pcs_ops; + port->pcs_xlg.ops = &mvpp2_phylink_xlg_pcs_ops; + if (!mvpp2_use_acpi_compat_mode(port_fwnode)) { port->phylink_config.dev = &dev->dev; port->phylink_config.type = PHYLINK_NETDEV; @@ -6940,9 +6943,6 @@ static int mvpp2_port_probe(struct platform_device *pdev, port->phylink_config.supported_interfaces); } - port->pcs_gmac.ops = &mvpp2_phylink_gmac_pcs_ops; - port->pcs_xlg.ops = &mvpp2_phylink_xlg_pcs_ops; - phylink = phylink_create(&port->phylink_config, port_fwnode, phy_mode, &mvpp2_phylink_ops); if (IS_ERR(phylink)) { From ba88b5533728c54bdea68431988eff2d9a7a1237 Mon Sep 17 00:00:00 2001 From: Subash Abhinov Kasiviswanathan Date: Fri, 18 Feb 2022 01:50:18 -0700 Subject: [PATCH 315/493] MAINTAINERS: rmnet: Update email addresses Switch to the quicinc.com ids. Signed-off-by: Sean Tranchetti Signed-off-by: Subash Abhinov Kasiviswanathan Link: https://lore.kernel.org/r/1645174218-32632-1-git-send-email-quic_subashab@quicinc.com Signed-off-by: Jakub Kicinski --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 6db79f3b209e30..b57077b935ba93 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16077,8 +16077,8 @@ F: Documentation/devicetree/bindings/mtd/qcom,nandc.yaml F: drivers/mtd/nand/raw/qcom_nandc.c QUALCOMM RMNET DRIVER -M: Subash Abhinov Kasiviswanathan -M: Sean Tranchetti +M: Subash Abhinov Kasiviswanathan +M: Sean Tranchetti L: netdev@vger.kernel.org S: Maintained F: Documentation/networking/device_drivers/cellular/qualcomm/rmnet.rst From 3a14d0888eb4b0045884126acc69abfb7b87814d Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Fri, 18 Feb 2022 14:15:35 +0100 Subject: [PATCH 316/493] nfp: flower: Fix a potential leak in nfp_tunnel_add_shared_mac() ida_simple_get() returns an id between min (0) and max (NFP_MAX_MAC_INDEX) inclusive. So NFP_MAX_MAC_INDEX (0xff) is a valid id. In order for the error handling path to work correctly, the 'invalid' value for 'ida_idx' should not be in the 0..NFP_MAX_MAC_INDEX range, inclusive. So set it to -1. Fixes: 20cce8865098 ("nfp: flower: enable MAC address sharing for offloadable devs") Signed-off-by: Christophe JAILLET Signed-off-by: Simon Horman Link: https://lore.kernel.org/r/20220218131535.100258-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c b/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c index 0a326e04e69233..cb43651ea9ba87 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c +++ b/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c @@ -922,8 +922,8 @@ nfp_tunnel_add_shared_mac(struct nfp_app *app, struct net_device *netdev, int port, bool mod) { struct nfp_flower_priv *priv = app->priv; - int ida_idx = NFP_MAX_MAC_INDEX, err; struct nfp_tun_offloaded_mac *entry; + int ida_idx = -1, err; u16 nfp_mac_idx = 0; entry = nfp_tunnel_lookup_offloaded_macs(app, netdev->dev_addr); @@ -997,7 +997,7 @@ nfp_tunnel_add_shared_mac(struct nfp_app *app, struct net_device *netdev, err_free_entry: kfree(entry); err_free_ida: - if (ida_idx != NFP_MAX_MAC_INDEX) + if (ida_idx != -1) ida_simple_remove(&priv->tun.mac_off_ids, ida_idx); return err; From b1e8206582f9d680cff7d04828708c8b6ab32957 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 14 Feb 2022 10:16:57 +0100 Subject: [PATCH 317/493] sched: Fix yet more sched_fork() races Where commit 4ef0c5c6b5ba ("kernel/sched: Fix sched_fork() access an invalid sched_task_group") fixed a fork race vs cgroup, it opened up a race vs syscalls by not placing the task on the runqueue before it gets exposed through the pidhash. Commit 13765de8148f ("sched/fair: Fix fault in reweight_entity") is trying to fix a single instance of this, instead fix the whole class of issues, effectively reverting this commit. Fixes: 4ef0c5c6b5ba ("kernel/sched: Fix sched_fork() access an invalid sched_task_group") Reported-by: Linus Torvalds Signed-off-by: Peter Zijlstra (Intel) Tested-by: Tadeusz Struk Tested-by: Zhang Qiao Tested-by: Dietmar Eggemann Link: https://lkml.kernel.org/r/YgoeCbwj5mbCR0qA@hirez.programming.kicks-ass.net --- include/linux/sched/task.h | 4 ++-- kernel/fork.c | 13 ++++++++++++- kernel/sched/core.c | 34 +++++++++++++++++++++------------- 3 files changed, 35 insertions(+), 16 deletions(-) diff --git a/include/linux/sched/task.h b/include/linux/sched/task.h index b9198a1b3a8477..e84e54d1b490f1 100644 --- a/include/linux/sched/task.h +++ b/include/linux/sched/task.h @@ -54,8 +54,8 @@ extern asmlinkage void schedule_tail(struct task_struct *prev); extern void init_idle(struct task_struct *idle, int cpu); extern int sched_fork(unsigned long clone_flags, struct task_struct *p); -extern void sched_post_fork(struct task_struct *p, - struct kernel_clone_args *kargs); +extern void sched_cgroup_fork(struct task_struct *p, struct kernel_clone_args *kargs); +extern void sched_post_fork(struct task_struct *p); extern void sched_dead(struct task_struct *p); void __noreturn do_task_dead(void); diff --git a/kernel/fork.c b/kernel/fork.c index d75a528f7b2196..c607d238fc23bd 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -2266,6 +2266,17 @@ static __latent_entropy struct task_struct *copy_process( if (retval) goto bad_fork_put_pidfd; + /* + * Now that the cgroups are pinned, re-clone the parent cgroup and put + * the new task on the correct runqueue. All this *before* the task + * becomes visible. + * + * This isn't part of ->can_fork() because while the re-cloning is + * cgroup specific, it unconditionally needs to place the task on a + * runqueue. + */ + sched_cgroup_fork(p, args); + /* * From this point on we must avoid any synchronous user-space * communication until we take the tasklist-lock. In particular, we do @@ -2376,7 +2387,7 @@ static __latent_entropy struct task_struct *copy_process( write_unlock_irq(&tasklist_lock); proc_fork_connector(p); - sched_post_fork(p, args); + sched_post_fork(p); cgroup_post_fork(p, args); perf_event_fork(p); diff --git a/kernel/sched/core.c b/kernel/sched/core.c index fcf0c180617c29..9745613d531ce0 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -1214,9 +1214,8 @@ int tg_nop(struct task_group *tg, void *data) } #endif -static void set_load_weight(struct task_struct *p) +static void set_load_weight(struct task_struct *p, bool update_load) { - bool update_load = !(READ_ONCE(p->__state) & TASK_NEW); int prio = p->static_prio - MAX_RT_PRIO; struct load_weight *load = &p->se.load; @@ -4407,7 +4406,7 @@ int sched_fork(unsigned long clone_flags, struct task_struct *p) p->static_prio = NICE_TO_PRIO(0); p->prio = p->normal_prio = p->static_prio; - set_load_weight(p); + set_load_weight(p, false); /* * We don't need the reset flag anymore after the fork. It has @@ -4425,6 +4424,7 @@ int sched_fork(unsigned long clone_flags, struct task_struct *p) init_entity_runnable_average(&p->se); + #ifdef CONFIG_SCHED_INFO if (likely(sched_info_on())) memset(&p->sched_info, 0, sizeof(p->sched_info)); @@ -4440,18 +4440,23 @@ int sched_fork(unsigned long clone_flags, struct task_struct *p) return 0; } -void sched_post_fork(struct task_struct *p, struct kernel_clone_args *kargs) +void sched_cgroup_fork(struct task_struct *p, struct kernel_clone_args *kargs) { unsigned long flags; -#ifdef CONFIG_CGROUP_SCHED - struct task_group *tg; -#endif + /* + * Because we're not yet on the pid-hash, p->pi_lock isn't strictly + * required yet, but lockdep gets upset if rules are violated. + */ raw_spin_lock_irqsave(&p->pi_lock, flags); #ifdef CONFIG_CGROUP_SCHED - tg = container_of(kargs->cset->subsys[cpu_cgrp_id], - struct task_group, css); - p->sched_task_group = autogroup_task_group(p, tg); + if (1) { + struct task_group *tg; + tg = container_of(kargs->cset->subsys[cpu_cgrp_id], + struct task_group, css); + tg = autogroup_task_group(p, tg); + p->sched_task_group = tg; + } #endif rseq_migrate(p); /* @@ -4462,7 +4467,10 @@ void sched_post_fork(struct task_struct *p, struct kernel_clone_args *kargs) if (p->sched_class->task_fork) p->sched_class->task_fork(p); raw_spin_unlock_irqrestore(&p->pi_lock, flags); +} +void sched_post_fork(struct task_struct *p) +{ uclamp_post_fork(p); } @@ -6922,7 +6930,7 @@ void set_user_nice(struct task_struct *p, long nice) put_prev_task(rq, p); p->static_prio = NICE_TO_PRIO(nice); - set_load_weight(p); + set_load_weight(p, true); old_prio = p->prio; p->prio = effective_prio(p); @@ -7213,7 +7221,7 @@ static void __setscheduler_params(struct task_struct *p, */ p->rt_priority = attr->sched_priority; p->normal_prio = normal_prio(p); - set_load_weight(p); + set_load_weight(p, true); } /* @@ -9446,7 +9454,7 @@ void __init sched_init(void) #endif } - set_load_weight(&init_task); + set_load_weight(&init_task, false); /* * The boot idle thread does lazy MMU switching as well: From 2428766e201565a5fa964d7461d9f6608eb04d7d Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 18 Feb 2022 11:49:04 +0100 Subject: [PATCH 318/493] MAINTAINERS: remove duplicate entry for i2c-qcom-geni The driver is already covered in the ARM/QUALCOMM section. Also, Akash Asthana's email bounces meanwhile and Mukesh Savaliya has never responded to mails regarding this driver. Signed-off-by: Wolfram Sang Acked-by: Bjorn Andersson Signed-off-by: Wolfram Sang --- MAINTAINERS | 8 -------- 1 file changed, 8 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index ea3e6c91438481..f0485f61295dcb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15972,14 +15972,6 @@ F: Documentation/devicetree/bindings/misc/qcom,fastrpc.txt F: drivers/misc/fastrpc.c F: include/uapi/misc/fastrpc.h -QUALCOMM GENERIC INTERFACE I2C DRIVER -M: Akash Asthana -M: Mukesh Savaliya -L: linux-i2c@vger.kernel.org -L: linux-arm-msm@vger.kernel.org -S: Supported -F: drivers/i2c/busses/i2c-qcom-geni.c - QUALCOMM HEXAGON ARCHITECTURE M: Brian Cain L: linux-hexagon@vger.kernel.org From 0cd33c5ffec12bd77a1c02db2469fac08f840939 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Fri, 18 Feb 2022 13:35:38 -0800 Subject: [PATCH 319/493] selftests: mptcp: fix diag instability Instead of waiting for an arbitrary amount of time for the MPTCP MP_CAPABLE handshake to complete, explicitly wait for the relevant socket to enter into the established status. Additionally let the data transfer application use the slowest transfer mode available (-r), to cope with very slow host, or high jitter caused by hosting VMs. Fixes: df62f2ec3df6 ("selftests/mptcp: add diag interface tests") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/258 Reported-and-tested-by: Matthieu Baerts Signed-off-by: Paolo Abeni Signed-off-by: Mat Martineau Signed-off-by: David S. Miller --- tools/testing/selftests/net/mptcp/diag.sh | 44 +++++++++++++++++++---- 1 file changed, 37 insertions(+), 7 deletions(-) diff --git a/tools/testing/selftests/net/mptcp/diag.sh b/tools/testing/selftests/net/mptcp/diag.sh index 2674ba20d52490..ff821025d30963 100755 --- a/tools/testing/selftests/net/mptcp/diag.sh +++ b/tools/testing/selftests/net/mptcp/diag.sh @@ -71,6 +71,36 @@ chk_msk_remote_key_nr() __chk_nr "grep -c remote_key" $* } +# $1: ns, $2: port +wait_local_port_listen() +{ + local listener_ns="${1}" + local port="${2}" + + local port_hex i + + port_hex="$(printf "%04X" "${port}")" + for i in $(seq 10); do + ip netns exec "${listener_ns}" cat /proc/net/tcp | \ + awk "BEGIN {rc=1} {if (\$2 ~ /:${port_hex}\$/ && \$4 ~ /0A/) {rc=0; exit}} END {exit rc}" && + break + sleep 0.1 + done +} + +wait_connected() +{ + local listener_ns="${1}" + local port="${2}" + + local port_hex i + + port_hex="$(printf "%04X" "${port}")" + for i in $(seq 10); do + ip netns exec ${listener_ns} grep -q " 0100007F:${port_hex} " /proc/net/tcp && break + sleep 0.1 + done +} trap cleanup EXIT ip netns add $ns @@ -81,15 +111,15 @@ echo "a" | \ ip netns exec $ns \ ./mptcp_connect -p 10000 -l -t ${timeout_poll} \ 0.0.0.0 >/dev/null & -sleep 0.1 +wait_local_port_listen $ns 10000 chk_msk_nr 0 "no msk on netns creation" echo "b" | \ timeout ${timeout_test} \ ip netns exec $ns \ - ./mptcp_connect -p 10000 -j -t ${timeout_poll} \ + ./mptcp_connect -p 10000 -r 0 -t ${timeout_poll} \ 127.0.0.1 >/dev/null & -sleep 0.1 +wait_connected $ns 10000 chk_msk_nr 2 "after MPC handshake " chk_msk_remote_key_nr 2 "....chk remote_key" chk_msk_fallback_nr 0 "....chk no fallback" @@ -101,13 +131,13 @@ echo "a" | \ ip netns exec $ns \ ./mptcp_connect -p 10001 -l -s TCP -t ${timeout_poll} \ 0.0.0.0 >/dev/null & -sleep 0.1 +wait_local_port_listen $ns 10001 echo "b" | \ timeout ${timeout_test} \ ip netns exec $ns \ - ./mptcp_connect -p 10001 -j -t ${timeout_poll} \ + ./mptcp_connect -p 10001 -r 0 -t ${timeout_poll} \ 127.0.0.1 >/dev/null & -sleep 0.1 +wait_connected $ns 10001 chk_msk_fallback_nr 1 "check fallback" flush_pids @@ -119,7 +149,7 @@ for I in `seq 1 $NR_CLIENTS`; do ./mptcp_connect -p $((I+10001)) -l -w 10 \ -t ${timeout_poll} 0.0.0.0 >/dev/null & done -sleep 0.1 +wait_local_port_listen $ns $((NR_CLIENTS + 10001)) for I in `seq 1 $NR_CLIENTS`; do echo "b" | \ From 5b31dda736e31c58d1941c7349569c7452eafb6b Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Fri, 18 Feb 2022 13:35:39 -0800 Subject: [PATCH 320/493] selftests: mptcp: improve 'fair usage on close' stability The mentioned test has to wait for a subflow creation failure. The current code looks for TCP sockets in TW state and sometimes misses the relevant event. Switch to a more stable check, looking for the associated mib counter. Fixes: 46e967d187ed ("selftests: mptcp: add tests for subflow creation failure") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/257 Reported-and-tested-by: Matthieu Baerts Signed-off-by: Paolo Abeni Signed-off-by: Mat Martineau Signed-off-by: David S. Miller --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index c0801df15f5472..10b3bd805ac6e1 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -961,7 +961,7 @@ wait_for_tw() local ns=$1 while [ $time -lt $timeout_ms ]; do - local cnt=$(ip netns exec $ns ss -t state time-wait |wc -l) + local cnt=$(ip netns exec $ns nstat -as TcpAttemptFails | grep TcpAttemptFails | awk '{print $2}') [ "$cnt" = 1 ] && return 1 time=$((time + 100)) From 98247bc16a27cf8ead4c47ce9f15888be85841fc Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Fri, 18 Feb 2022 13:35:40 -0800 Subject: [PATCH 321/493] mptcp: fix race in overlapping signal events After commit a88c9e496937 ("mptcp: do not block subflows creation on errors"), if a signal address races with a failing subflow creation, the subflow creation failure control path can trigger the selection of the next address to be announced while the current announced is still pending. The above will cause the unintended suppression of the ADD_ADDR announce. Fix the issue skipping the to-be-suppressed announce before it will mark an endpoint as already used. The relevant announce will be triggered again when the current one will complete. Fixes: a88c9e496937 ("mptcp: do not block subflows creation on errors") Reviewed-by: Matthieu Baerts Signed-off-by: Paolo Abeni Signed-off-by: Mat Martineau Signed-off-by: David S. Miller --- net/mptcp/pm_netlink.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/net/mptcp/pm_netlink.c b/net/mptcp/pm_netlink.c index 356f596e203230..82f82a513f5bed 100644 --- a/net/mptcp/pm_netlink.c +++ b/net/mptcp/pm_netlink.c @@ -546,6 +546,16 @@ static void mptcp_pm_create_subflow_or_signal_addr(struct mptcp_sock *msk) if (msk->pm.add_addr_signaled < add_addr_signal_max) { local = select_signal_address(pernet, msk); + /* due to racing events on both ends we can reach here while + * previous add address is still running: if we invoke now + * mptcp_pm_announce_addr(), that will fail and the + * corresponding id will be marked as used. + * Instead let the PM machinery reschedule us when the + * current address announce will be completed. + */ + if (msk->pm.addr_signal & BIT(MPTCP_ADD_ADDR_SIGNAL)) + return; + if (local) { if (mptcp_pm_alloc_anno_list(msk, local)) { __clear_bit(local->addr.id, msk->pm.id_avail_bitmap); From 837cf45df163a3780bc04b555700231e95b31dc9 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Fri, 18 Feb 2022 13:35:41 -0800 Subject: [PATCH 322/493] mptcp: fix race in incoming ADD_ADDR option processing If an MPTCP endpoint received multiple consecutive incoming ADD_ADDR options, mptcp_pm_add_addr_received() can overwrite the current remote address value after the PM lock is released in mptcp_pm_nl_add_addr_received() and before such address is echoed. Fix the issue caching the remote address value a little earlier and always using the cached value after releasing the PM lock. Fixes: f7efc7771eac ("mptcp: drop argument port from mptcp_pm_announce_addr") Reviewed-by: Matthieu Baerts Signed-off-by: Paolo Abeni Signed-off-by: Mat Martineau Signed-off-by: David S. Miller --- net/mptcp/pm_netlink.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/net/mptcp/pm_netlink.c b/net/mptcp/pm_netlink.c index 82f82a513f5bed..4b5d795383cd62 100644 --- a/net/mptcp/pm_netlink.c +++ b/net/mptcp/pm_netlink.c @@ -660,6 +660,7 @@ static void mptcp_pm_nl_add_addr_received(struct mptcp_sock *msk) unsigned int add_addr_accept_max; struct mptcp_addr_info remote; unsigned int subflows_max; + bool reset_port = false; int i, nr; add_addr_accept_max = mptcp_pm_get_add_addr_accept_max(msk); @@ -669,15 +670,19 @@ static void mptcp_pm_nl_add_addr_received(struct mptcp_sock *msk) msk->pm.add_addr_accepted, add_addr_accept_max, msk->pm.remote.family); - if (lookup_subflow_by_daddr(&msk->conn_list, &msk->pm.remote)) + remote = msk->pm.remote; + if (lookup_subflow_by_daddr(&msk->conn_list, &remote)) goto add_addr_echo; + /* pick id 0 port, if none is provided the remote address */ + if (!remote.port) { + reset_port = true; + remote.port = sk->sk_dport; + } + /* connect to the specified remote address, using whatever * local address the routing configuration will pick. */ - remote = msk->pm.remote; - if (!remote.port) - remote.port = sk->sk_dport; nr = fill_local_addresses_vec(msk, addrs); msk->pm.add_addr_accepted++; @@ -690,8 +695,12 @@ static void mptcp_pm_nl_add_addr_received(struct mptcp_sock *msk) __mptcp_subflow_connect(sk, &addrs[i], &remote); spin_lock_bh(&msk->pm.lock); + /* be sure to echo exactly the received address */ + if (reset_port) + remote.port = 0; + add_addr_echo: - mptcp_pm_announce_addr(msk, &msk->pm.remote, true); + mptcp_pm_announce_addr(msk, &remote, true); mptcp_pm_nl_addr_send_ack(msk); } From f73c1194634506ab60af0debef04671fc431a435 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Fri, 18 Feb 2022 13:35:42 -0800 Subject: [PATCH 323/493] mptcp: add mibs counter for ignored incoming options The MPTCP in kernel path manager has some constraints on incoming addresses announce processing, so that in edge scenarios it can end-up dropping (ignoring) some of such announces. The above is not very limiting in practice since such scenarios are very uncommon and MPTCP will recover due to ADD_ADDR retransmissions. This patch adds a few MIB counters to account for such drop events to allow easier introspection of the critical scenarios. Fixes: f7efc7771eac ("mptcp: drop argument port from mptcp_pm_announce_addr") Reviewed-by: Matthieu Baerts Signed-off-by: Paolo Abeni Signed-off-by: Mat Martineau Signed-off-by: David S. Miller --- net/mptcp/mib.c | 2 ++ net/mptcp/mib.h | 2 ++ net/mptcp/pm.c | 8 ++++++-- 3 files changed, 10 insertions(+), 2 deletions(-) diff --git a/net/mptcp/mib.c b/net/mptcp/mib.c index 3240b72271a7f3..7558802a14350a 100644 --- a/net/mptcp/mib.c +++ b/net/mptcp/mib.c @@ -35,12 +35,14 @@ static const struct snmp_mib mptcp_snmp_list[] = { SNMP_MIB_ITEM("AddAddr", MPTCP_MIB_ADDADDR), SNMP_MIB_ITEM("EchoAdd", MPTCP_MIB_ECHOADD), SNMP_MIB_ITEM("PortAdd", MPTCP_MIB_PORTADD), + SNMP_MIB_ITEM("AddAddrDrop", MPTCP_MIB_ADDADDRDROP), SNMP_MIB_ITEM("MPJoinPortSynRx", MPTCP_MIB_JOINPORTSYNRX), SNMP_MIB_ITEM("MPJoinPortSynAckRx", MPTCP_MIB_JOINPORTSYNACKRX), SNMP_MIB_ITEM("MPJoinPortAckRx", MPTCP_MIB_JOINPORTACKRX), SNMP_MIB_ITEM("MismatchPortSynRx", MPTCP_MIB_MISMATCHPORTSYNRX), SNMP_MIB_ITEM("MismatchPortAckRx", MPTCP_MIB_MISMATCHPORTACKRX), SNMP_MIB_ITEM("RmAddr", MPTCP_MIB_RMADDR), + SNMP_MIB_ITEM("RmAddrDrop", MPTCP_MIB_RMADDRDROP), SNMP_MIB_ITEM("RmSubflow", MPTCP_MIB_RMSUBFLOW), SNMP_MIB_ITEM("MPPrioTx", MPTCP_MIB_MPPRIOTX), SNMP_MIB_ITEM("MPPrioRx", MPTCP_MIB_MPPRIORX), diff --git a/net/mptcp/mib.h b/net/mptcp/mib.h index ecd3d8b117e0be..2966fcb6548bac 100644 --- a/net/mptcp/mib.h +++ b/net/mptcp/mib.h @@ -28,12 +28,14 @@ enum linux_mptcp_mib_field { MPTCP_MIB_ADDADDR, /* Received ADD_ADDR with echo-flag=0 */ MPTCP_MIB_ECHOADD, /* Received ADD_ADDR with echo-flag=1 */ MPTCP_MIB_PORTADD, /* Received ADD_ADDR with a port-number */ + MPTCP_MIB_ADDADDRDROP, /* Dropped incoming ADD_ADDR */ MPTCP_MIB_JOINPORTSYNRX, /* Received a SYN MP_JOIN with a different port-number */ MPTCP_MIB_JOINPORTSYNACKRX, /* Received a SYNACK MP_JOIN with a different port-number */ MPTCP_MIB_JOINPORTACKRX, /* Received an ACK MP_JOIN with a different port-number */ MPTCP_MIB_MISMATCHPORTSYNRX, /* Received a SYN MP_JOIN with a mismatched port-number */ MPTCP_MIB_MISMATCHPORTACKRX, /* Received an ACK MP_JOIN with a mismatched port-number */ MPTCP_MIB_RMADDR, /* Received RM_ADDR */ + MPTCP_MIB_RMADDRDROP, /* Dropped incoming RM_ADDR */ MPTCP_MIB_RMSUBFLOW, /* Remove a subflow */ MPTCP_MIB_MPPRIOTX, /* Transmit a MP_PRIO */ MPTCP_MIB_MPPRIORX, /* Received a MP_PRIO */ diff --git a/net/mptcp/pm.c b/net/mptcp/pm.c index 696b2c4613a7c4..7bea318ac5f285 100644 --- a/net/mptcp/pm.c +++ b/net/mptcp/pm.c @@ -213,6 +213,8 @@ void mptcp_pm_add_addr_received(struct mptcp_sock *msk, mptcp_pm_add_addr_send_ack(msk); } else if (mptcp_pm_schedule_work(msk, MPTCP_PM_ADD_ADDR_RECEIVED)) { pm->remote = *addr; + } else { + __MPTCP_INC_STATS(sock_net((struct sock *)msk), MPTCP_MIB_ADDADDRDROP); } spin_unlock_bh(&pm->lock); @@ -253,8 +255,10 @@ void mptcp_pm_rm_addr_received(struct mptcp_sock *msk, mptcp_event_addr_removed(msk, rm_list->ids[i]); spin_lock_bh(&pm->lock); - mptcp_pm_schedule_work(msk, MPTCP_PM_RM_ADDR_RECEIVED); - pm->rm_list_rx = *rm_list; + if (mptcp_pm_schedule_work(msk, MPTCP_PM_RM_ADDR_RECEIVED)) + pm->rm_list_rx = *rm_list; + else + __MPTCP_INC_STATS(sock_net((struct sock *)msk), MPTCP_MIB_RMADDRDROP); spin_unlock_bh(&pm->lock); } From 6ef84b1517e08f6c2fc105b798a9d21bf4caa6cb Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Fri, 18 Feb 2022 13:35:43 -0800 Subject: [PATCH 324/493] selftests: mptcp: more robust signal race test The in kernel MPTCP PM implementation can process a single incoming add address option at any given time. In the mentioned test the server can surpass such limit. Let the setup cope with that allowing a faster add_addr retransmission. Fixes: a88c9e496937 ("mptcp: do not block subflows creation on errors") Fixes: f7efc7771eac ("mptcp: drop argument port from mptcp_pm_announce_addr") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/254 Reported-and-tested-by: Matthieu Baerts Reviewed-by: Matthieu Baerts Signed-off-by: Paolo Abeni Signed-off-by: Mat Martineau Signed-off-by: David S. Miller --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 10b3bd805ac6e1..0d6a71e7bb59f6 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -752,11 +752,17 @@ chk_add_nr() local mis_ack_nr=${8:-0} local count local dump_stats + local timeout + + timeout=`ip netns exec $ns1 sysctl -n net.mptcp.add_addr_timeout` printf "%-39s %s" " " "add" - count=`ip netns exec $ns2 nstat -as | grep MPTcpExtAddAddr | awk '{print $2}'` + count=`ip netns exec $ns2 nstat -as MPTcpExtAddAddr | grep MPTcpExtAddAddr | awk '{print $2}'` [ -z "$count" ] && count=0 - if [ "$count" != "$add_nr" ]; then + + # if the test configured a short timeout tolerate greater then expected + # add addrs options, due to retransmissions + if [ "$count" != "$add_nr" ] && [ "$timeout" -gt 1 -o "$count" -lt "$add_nr" ]; then echo "[fail] got $count ADD_ADDR[s] expected $add_nr" ret=1 dump_stats=1 @@ -1158,7 +1164,10 @@ signal_address_tests() ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags signal ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags signal ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags signal - run_tests $ns1 $ns2 10.0.1.1 + + # the peer could possibly miss some addr notification, allow retransmission + ip netns exec $ns1 sysctl -q net.mptcp.add_addr_timeout=1 + run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow chk_join_nr "signal addresses race test" 3 3 3 # the server will not signal the address terminating From e35f885b357d47e04380a2056d1b2cc3e6f4f24b Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Fri, 18 Feb 2022 13:35:44 -0800 Subject: [PATCH 325/493] selftests: mptcp: be more conservative with cookie MPJ limits Since commit 2843ff6f36db ("mptcp: remote addresses fullmesh"), an MPTCP client can attempt creating multiple MPJ subflow simultaneusly. In such scenario the server, when syncookies are enabled, could end-up accepting incoming MPJ syn even above the configured subflow limit, as the such limit can be enforced in a reliable way only after the subflow creation. In case of syncookie, only after the 3rd ack reception. As a consequence the related self-tests case sporadically fails, as it verify that the server always accept the expected number of MPJ syn. Address the issues relaxing the MPJ syn number constrain. Note that the check on the accepted number of MPJ 3rd ack still remains intact. Fixes: 2843ff6f36db ("mptcp: remote addresses fullmesh") Signed-off-by: Paolo Abeni Signed-off-by: Mat Martineau Signed-off-by: David S. Miller --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 0d6a71e7bb59f6..0c8a2a20b96cf0 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -660,6 +660,7 @@ chk_join_nr() local ack_nr=$4 local count local dump_stats + local with_cookie printf "%02u %-36s %s" "$TEST_COUNT" "$msg" "syn" count=`ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinSynRx | awk '{print $2}'` @@ -673,12 +674,20 @@ chk_join_nr() fi echo -n " - synack" + with_cookie=`ip netns exec $ns2 sysctl -n net.ipv4.tcp_syncookies` count=`ip netns exec $ns2 nstat -as | grep MPTcpExtMPJoinSynAckRx | awk '{print $2}'` [ -z "$count" ] && count=0 if [ "$count" != "$syn_ack_nr" ]; then - echo "[fail] got $count JOIN[s] synack expected $syn_ack_nr" - ret=1 - dump_stats=1 + # simult connections exceeding the limit with cookie enabled could go up to + # synack validation as the conn limit can be enforced reliably only after + # the subflow creation + if [ "$with_cookie" = 2 ] && [ "$count" -gt "$syn_ack_nr" ] && [ "$count" -le "$syn_nr" ]; then + echo -n "[ ok ]" + else + echo "[fail] got $count JOIN[s] synack expected $syn_ack_nr" + ret=1 + dump_stats=1 + fi else echo -n "[ ok ]" fi From 5486f5bf790b5c664913076c3194b8f916a5c7ad Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Thu, 17 Feb 2022 14:35:49 +0100 Subject: [PATCH 326/493] net: Force inlining of checksum functions in net/checksum.h All functions defined as static inline in net/checksum.h are meant to be inlined for performance reason. But since commit ac7c3e4ff401 ("compiler: enable CONFIG_OPTIMIZE_INLINING forcibly") the compiler is allowed to uninline functions when it wants. Fair enough in the general case, but for tiny performance critical checksum helpers that's counter-productive. The problem mainly arises when selecting CONFIG_CC_OPTIMISE_FOR_SIZE, Those helpers being 'static inline' in header files you suddenly find them duplicated many times in the resulting vmlinux. Here is a typical exemple when building powerpc pmac32_defconfig with CONFIG_CC_OPTIMISE_FOR_SIZE. csum_sub() appears 4 times: c04a23cc : c04a23cc: 7c 84 20 f8 not r4,r4 c04a23d0: 7c 63 20 14 addc r3,r3,r4 c04a23d4: 7c 63 01 94 addze r3,r3 c04a23d8: 4e 80 00 20 blr ... c04a2ce8: 4b ff f6 e5 bl c04a23cc ... c04a2d2c: 4b ff f6 a1 bl c04a23cc ... c04a2d54: 4b ff f6 79 bl c04a23cc ... c04a754c : c04a754c: 7c 84 20 f8 not r4,r4 c04a7550: 7c 63 20 14 addc r3,r3,r4 c04a7554: 7c 63 01 94 addze r3,r3 c04a7558: 4e 80 00 20 blr ... c04ac930: 4b ff ac 1d bl c04a754c ... c04ad264: 4b ff a2 e9 bl c04a754c ... c04e3b08 : c04e3b08: 7c 84 20 f8 not r4,r4 c04e3b0c: 7c 63 20 14 addc r3,r3,r4 c04e3b10: 7c 63 01 94 addze r3,r3 c04e3b14: 4e 80 00 20 blr ... c04e5788: 4b ff e3 81 bl c04e3b08 ... c04e65c8: 4b ff d5 41 bl c04e3b08 ... c0512d34 : c0512d34: 7c 84 20 f8 not r4,r4 c0512d38: 7c 63 20 14 addc r3,r3,r4 c0512d3c: 7c 63 01 94 addze r3,r3 c0512d40: 4e 80 00 20 blr ... c0512dfc: 4b ff ff 39 bl c0512d34 ... c05138bc: 4b ff f4 79 bl c0512d34 ... Restore the expected behaviour by using __always_inline for all functions defined in net/checksum.h vmlinux size is even reduced by 256 bytes with this patch: text data bss dec hex filename 6980022 2515362 194384 9689768 93daa8 vmlinux.before 6979862 2515266 194384 9689512 93d9a8 vmlinux.now Fixes: ac7c3e4ff401 ("compiler: enable CONFIG_OPTIMIZE_INLINING forcibly") Cc: Masahiro Yamada Cc: Nick Desaulniers Cc: Andrew Morton Signed-off-by: Christophe Leroy Signed-off-by: David S. Miller --- include/net/checksum.h | 47 +++++++++++++++++++++--------------------- 1 file changed, 24 insertions(+), 23 deletions(-) diff --git a/include/net/checksum.h b/include/net/checksum.h index 5218041e5c8f93..02d0c2d010147a 100644 --- a/include/net/checksum.h +++ b/include/net/checksum.h @@ -22,7 +22,7 @@ #include #ifndef _HAVE_ARCH_COPY_AND_CSUM_FROM_USER -static inline +static __always_inline __wsum csum_and_copy_from_user (const void __user *src, void *dst, int len) { @@ -33,7 +33,7 @@ __wsum csum_and_copy_from_user (const void __user *src, void *dst, #endif #ifndef HAVE_CSUM_COPY_USER -static __inline__ __wsum csum_and_copy_to_user +static __always_inline __wsum csum_and_copy_to_user (const void *src, void __user *dst, int len) { __wsum sum = csum_partial(src, len, ~0U); @@ -45,7 +45,7 @@ static __inline__ __wsum csum_and_copy_to_user #endif #ifndef _HAVE_ARCH_CSUM_AND_COPY -static inline __wsum +static __always_inline __wsum csum_partial_copy_nocheck(const void *src, void *dst, int len) { memcpy(dst, src, len); @@ -54,7 +54,7 @@ csum_partial_copy_nocheck(const void *src, void *dst, int len) #endif #ifndef HAVE_ARCH_CSUM_ADD -static inline __wsum csum_add(__wsum csum, __wsum addend) +static __always_inline __wsum csum_add(__wsum csum, __wsum addend) { u32 res = (__force u32)csum; res += (__force u32)addend; @@ -62,12 +62,12 @@ static inline __wsum csum_add(__wsum csum, __wsum addend) } #endif -static inline __wsum csum_sub(__wsum csum, __wsum addend) +static __always_inline __wsum csum_sub(__wsum csum, __wsum addend) { return csum_add(csum, ~addend); } -static inline __sum16 csum16_add(__sum16 csum, __be16 addend) +static __always_inline __sum16 csum16_add(__sum16 csum, __be16 addend) { u16 res = (__force u16)csum; @@ -75,12 +75,12 @@ static inline __sum16 csum16_add(__sum16 csum, __be16 addend) return (__force __sum16)(res + (res < (__force u16)addend)); } -static inline __sum16 csum16_sub(__sum16 csum, __be16 addend) +static __always_inline __sum16 csum16_sub(__sum16 csum, __be16 addend) { return csum16_add(csum, ~addend); } -static inline __wsum csum_shift(__wsum sum, int offset) +static __always_inline __wsum csum_shift(__wsum sum, int offset) { /* rotate sum to align it with a 16b boundary */ if (offset & 1) @@ -88,42 +88,43 @@ static inline __wsum csum_shift(__wsum sum, int offset) return sum; } -static inline __wsum +static __always_inline __wsum csum_block_add(__wsum csum, __wsum csum2, int offset) { return csum_add(csum, csum_shift(csum2, offset)); } -static inline __wsum +static __always_inline __wsum csum_block_add_ext(__wsum csum, __wsum csum2, int offset, int len) { return csum_block_add(csum, csum2, offset); } -static inline __wsum +static __always_inline __wsum csum_block_sub(__wsum csum, __wsum csum2, int offset) { return csum_block_add(csum, ~csum2, offset); } -static inline __wsum csum_unfold(__sum16 n) +static __always_inline __wsum csum_unfold(__sum16 n) { return (__force __wsum)n; } -static inline __wsum csum_partial_ext(const void *buff, int len, __wsum sum) +static __always_inline +__wsum csum_partial_ext(const void *buff, int len, __wsum sum) { return csum_partial(buff, len, sum); } #define CSUM_MANGLED_0 ((__force __sum16)0xffff) -static inline void csum_replace_by_diff(__sum16 *sum, __wsum diff) +static __always_inline void csum_replace_by_diff(__sum16 *sum, __wsum diff) { *sum = csum_fold(csum_add(diff, ~csum_unfold(*sum))); } -static inline void csum_replace4(__sum16 *sum, __be32 from, __be32 to) +static __always_inline void csum_replace4(__sum16 *sum, __be32 from, __be32 to) { __wsum tmp = csum_sub(~csum_unfold(*sum), (__force __wsum)from); @@ -136,7 +137,7 @@ static inline void csum_replace4(__sum16 *sum, __be32 from, __be32 to) * m : old value of a 16bit field * m' : new value of a 16bit field */ -static inline void csum_replace2(__sum16 *sum, __be16 old, __be16 new) +static __always_inline void csum_replace2(__sum16 *sum, __be16 old, __be16 new) { *sum = ~csum16_add(csum16_sub(~(*sum), old), new); } @@ -150,16 +151,16 @@ void inet_proto_csum_replace16(__sum16 *sum, struct sk_buff *skb, void inet_proto_csum_replace_by_diff(__sum16 *sum, struct sk_buff *skb, __wsum diff, bool pseudohdr); -static inline void inet_proto_csum_replace2(__sum16 *sum, struct sk_buff *skb, - __be16 from, __be16 to, - bool pseudohdr) +static __always_inline +void inet_proto_csum_replace2(__sum16 *sum, struct sk_buff *skb, + __be16 from, __be16 to, bool pseudohdr) { inet_proto_csum_replace4(sum, skb, (__force __be32)from, (__force __be32)to, pseudohdr); } -static inline __wsum remcsum_adjust(void *ptr, __wsum csum, - int start, int offset) +static __always_inline __wsum remcsum_adjust(void *ptr, __wsum csum, + int start, int offset) { __sum16 *psum = (__sum16 *)(ptr + offset); __wsum delta; @@ -175,12 +176,12 @@ static inline __wsum remcsum_adjust(void *ptr, __wsum csum, return delta; } -static inline void remcsum_unadjust(__sum16 *psum, __wsum delta) +static __always_inline void remcsum_unadjust(__sum16 *psum, __wsum delta) { *psum = csum_fold(csum_sub(delta, (__force __wsum)*psum)); } -static inline __wsum wsum_negate(__wsum val) +static __always_inline __wsum wsum_negate(__wsum val) { return (__force __wsum)-((__force u32)val); } From 3d00827a90db6f79abc7cdc553887f89a2e0a184 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Svenning=20S=C3=B8rensen?= Date: Fri, 18 Feb 2022 11:27:01 +0000 Subject: [PATCH 327/493] net: dsa: microchip: fix bridging with more than two member ports MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit b3612ccdf284 ("net: dsa: microchip: implement multi-bridge support") plugged a packet leak between ports that were members of different bridges. Unfortunately, this broke another use case, namely that of more than two ports that are members of the same bridge. After that commit, when a port is added to a bridge, hardware bridging between other member ports of that bridge will be cleared, preventing packet exchange between them. Fix by ensuring that the Port VLAN Membership bitmap includes any existing ports in the bridge, not just the port being added. Fixes: b3612ccdf284 ("net: dsa: microchip: implement multi-bridge support") Signed-off-by: Svenning Sørensen Tested-by: Oleksij Rempel Signed-off-by: David S. Miller --- drivers/net/dsa/microchip/ksz_common.c | 26 +++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-) diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 55dbda04ea6289..243f8ad6d06efc 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -26,7 +26,7 @@ void ksz_update_port_member(struct ksz_device *dev, int port) struct dsa_switch *ds = dev->ds; u8 port_member = 0, cpu_port; const struct dsa_port *dp; - int i; + int i, j; if (!dsa_is_user_port(ds, port)) return; @@ -45,13 +45,33 @@ void ksz_update_port_member(struct ksz_device *dev, int port) continue; if (!dsa_port_bridge_same(dp, other_dp)) continue; + if (other_p->stp_state != BR_STATE_FORWARDING) + continue; - if (other_p->stp_state == BR_STATE_FORWARDING && - p->stp_state == BR_STATE_FORWARDING) { + if (p->stp_state == BR_STATE_FORWARDING) { val |= BIT(port); port_member |= BIT(i); } + /* Retain port [i]'s relationship to other ports than [port] */ + for (j = 0; j < ds->num_ports; j++) { + const struct dsa_port *third_dp; + struct ksz_port *third_p; + + if (j == i) + continue; + if (j == port) + continue; + if (!dsa_is_user_port(ds, j)) + continue; + third_p = &dev->ports[j]; + if (third_p->stp_state != BR_STATE_FORWARDING) + continue; + third_dp = dsa_to_port(ds, j); + if (dsa_port_bridge_same(other_dp, third_dp)) + val |= BIT(j); + } + dev->dev_ops->cfg_port_member(dev, i, val | cpu_port); } From 8940e6b669ca1196ce0a0549c819078096390f76 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Fri, 18 Feb 2022 14:13:02 +0200 Subject: [PATCH 328/493] net: dsa: avoid call to __dev_set_promiscuity() while rtnl_mutex isn't held If the DSA master doesn't support IFF_UNICAST_FLT, then the following call path is possible: dsa_slave_switchdev_event_work -> dsa_port_host_fdb_add -> dev_uc_add -> __dev_set_rx_mode -> __dev_set_promiscuity Since the blamed commit, dsa_slave_switchdev_event_work() no longer holds rtnl_lock(), which triggers the ASSERT_RTNL() from __dev_set_promiscuity(). Taking rtnl_lock() around dev_uc_add() is impossible, because all the code paths that call dsa_flush_workqueue() do so from contexts where the rtnl_mutex is already held - so this would lead to an instant deadlock. dev_uc_add() in itself doesn't require the rtnl_mutex for protection. There is this comment in __dev_set_rx_mode() which assumes so: /* Unicast addresses changes may only happen under the rtnl, * therefore calling __dev_set_promiscuity here is safe. */ but it is from commit 4417da668c00 ("[NET]: dev: secondary unicast address support") dated June 2007, and in the meantime, commit f1f28aa3510d ("netdev: Add addr_list_lock to struct net_device."), dated July 2008, has added &dev->addr_list_lock to protect this instead of the global rtnl_mutex. Nonetheless, __dev_set_promiscuity() does assume rtnl_mutex protection, but it is the uncommon path of what we typically expect dev_uc_add() to do. So since only the uncommon path requires rtnl_lock(), just check ahead of time whether dev_uc_add() would result into a call to __dev_set_promiscuity(), and handle that condition separately. DSA already configures the master interface to be promiscuous if the tagger requires this. We can extend this to also cover the case where the master doesn't handle dev_uc_add() (doesn't support IFF_UNICAST_FLT), and on the premise that we'd end up making it promiscuous during operation anyway, either if a DSA slave has a non-inherited MAC address, or if the bridge notifies local FDB entries for its own MAC address, the address of a station learned on a foreign port, etc. Fixes: 0faf890fc519 ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work") Reported-by: Oleksij Rempel Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- net/dsa/master.c | 7 ++++++- net/dsa/port.c | 20 ++++++++++++++------ 2 files changed, 20 insertions(+), 7 deletions(-) diff --git a/net/dsa/master.c b/net/dsa/master.c index 2199104ca7dfa1..880f910b23a995 100644 --- a/net/dsa/master.c +++ b/net/dsa/master.c @@ -260,11 +260,16 @@ static void dsa_netdev_ops_set(struct net_device *dev, dev->dsa_ptr->netdev_ops = ops; } +/* Keep the master always promiscuous if the tagging protocol requires that + * (garbles MAC DA) or if it doesn't support unicast filtering, case in which + * it would revert to promiscuous mode as soon as we call dev_uc_add() on it + * anyway. + */ static void dsa_master_set_promiscuity(struct net_device *dev, int inc) { const struct dsa_device_ops *ops = dev->dsa_ptr->tag_ops; - if (!ops->promisc_on_master) + if ((dev->priv_flags & IFF_UNICAST_FLT) && !ops->promisc_on_master) return; ASSERT_RTNL(); diff --git a/net/dsa/port.c b/net/dsa/port.c index bd78192e0e47d6..eef4a98f262824 100644 --- a/net/dsa/port.c +++ b/net/dsa/port.c @@ -781,9 +781,15 @@ int dsa_port_host_fdb_add(struct dsa_port *dp, const unsigned char *addr, struct dsa_port *cpu_dp = dp->cpu_dp; int err; - err = dev_uc_add(cpu_dp->master, addr); - if (err) - return err; + /* Avoid a call to __dev_set_promiscuity() on the master, which + * requires rtnl_lock(), since we can't guarantee that is held here, + * and we can't take it either. + */ + if (cpu_dp->master->priv_flags & IFF_UNICAST_FLT) { + err = dev_uc_add(cpu_dp->master, addr); + if (err) + return err; + } return dsa_port_notify(dp, DSA_NOTIFIER_HOST_FDB_ADD, &info); } @@ -800,9 +806,11 @@ int dsa_port_host_fdb_del(struct dsa_port *dp, const unsigned char *addr, struct dsa_port *cpu_dp = dp->cpu_dp; int err; - err = dev_uc_del(cpu_dp->master, addr); - if (err) - return err; + if (cpu_dp->master->priv_flags & IFF_UNICAST_FLT) { + err = dev_uc_del(cpu_dp->master, addr); + if (err) + return err; + } return dsa_port_notify(dp, DSA_NOTIFIER_HOST_FDB_DEL, &info); } From b1a5983f56e371046dcf164f90bfaf704d2b89f6 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Thu, 17 Feb 2022 23:41:20 +0100 Subject: [PATCH 329/493] netfilter: nf_tables_offload: incorrect flow offload action array size immediate verdict expression needs to allocate one slot in the flow offload action array, however, immediate data expression does not need to do so. fwd and dup expression need to allocate one slot, this is missing. Add a new offload_action interface to report if this expression needs to allocate one slot in the flow offload action array. Fixes: be2861dc36d7 ("netfilter: nft_{fwd,dup}_netdev: add offload support") Reported-and-tested-by: Nick Gregory Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_tables.h | 2 +- include/net/netfilter/nf_tables_offload.h | 2 -- net/netfilter/nf_tables_offload.c | 3 ++- net/netfilter/nft_dup_netdev.c | 6 ++++++ net/netfilter/nft_fwd_netdev.c | 6 ++++++ net/netfilter/nft_immediate.c | 12 +++++++++++- 6 files changed, 26 insertions(+), 5 deletions(-) diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h index eaf55da9a20506..c4c0861deac12a 100644 --- a/include/net/netfilter/nf_tables.h +++ b/include/net/netfilter/nf_tables.h @@ -905,9 +905,9 @@ struct nft_expr_ops { int (*offload)(struct nft_offload_ctx *ctx, struct nft_flow_rule *flow, const struct nft_expr *expr); + bool (*offload_action)(const struct nft_expr *expr); void (*offload_stats)(struct nft_expr *expr, const struct flow_stats *stats); - u32 offload_flags; const struct nft_expr_type *type; void *data; }; diff --git a/include/net/netfilter/nf_tables_offload.h b/include/net/netfilter/nf_tables_offload.h index f9d95ff82df834..7971478439580c 100644 --- a/include/net/netfilter/nf_tables_offload.h +++ b/include/net/netfilter/nf_tables_offload.h @@ -67,8 +67,6 @@ struct nft_flow_rule { struct flow_rule *rule; }; -#define NFT_OFFLOAD_F_ACTION (1 << 0) - void nft_flow_rule_set_addr_type(struct nft_flow_rule *flow, enum flow_dissector_key_id addr_type); diff --git a/net/netfilter/nf_tables_offload.c b/net/netfilter/nf_tables_offload.c index 9656c164622220..2d36952b13920d 100644 --- a/net/netfilter/nf_tables_offload.c +++ b/net/netfilter/nf_tables_offload.c @@ -94,7 +94,8 @@ struct nft_flow_rule *nft_flow_rule_create(struct net *net, expr = nft_expr_first(rule); while (nft_expr_more(rule, expr)) { - if (expr->ops->offload_flags & NFT_OFFLOAD_F_ACTION) + if (expr->ops->offload_action && + expr->ops->offload_action(expr)) num_actions++; expr = nft_expr_next(expr); diff --git a/net/netfilter/nft_dup_netdev.c b/net/netfilter/nft_dup_netdev.c index bbf3fcba3df401..5b5c607fbf83f0 100644 --- a/net/netfilter/nft_dup_netdev.c +++ b/net/netfilter/nft_dup_netdev.c @@ -67,6 +67,11 @@ static int nft_dup_netdev_offload(struct nft_offload_ctx *ctx, return nft_fwd_dup_netdev_offload(ctx, flow, FLOW_ACTION_MIRRED, oif); } +static bool nft_dup_netdev_offload_action(const struct nft_expr *expr) +{ + return true; +} + static struct nft_expr_type nft_dup_netdev_type; static const struct nft_expr_ops nft_dup_netdev_ops = { .type = &nft_dup_netdev_type, @@ -75,6 +80,7 @@ static const struct nft_expr_ops nft_dup_netdev_ops = { .init = nft_dup_netdev_init, .dump = nft_dup_netdev_dump, .offload = nft_dup_netdev_offload, + .offload_action = nft_dup_netdev_offload_action, }; static struct nft_expr_type nft_dup_netdev_type __read_mostly = { diff --git a/net/netfilter/nft_fwd_netdev.c b/net/netfilter/nft_fwd_netdev.c index fa9301ca603318..619e394a91de9b 100644 --- a/net/netfilter/nft_fwd_netdev.c +++ b/net/netfilter/nft_fwd_netdev.c @@ -79,6 +79,11 @@ static int nft_fwd_netdev_offload(struct nft_offload_ctx *ctx, return nft_fwd_dup_netdev_offload(ctx, flow, FLOW_ACTION_REDIRECT, oif); } +static bool nft_fwd_netdev_offload_action(const struct nft_expr *expr) +{ + return true; +} + struct nft_fwd_neigh { u8 sreg_dev; u8 sreg_addr; @@ -222,6 +227,7 @@ static const struct nft_expr_ops nft_fwd_netdev_ops = { .dump = nft_fwd_netdev_dump, .validate = nft_fwd_validate, .offload = nft_fwd_netdev_offload, + .offload_action = nft_fwd_netdev_offload_action, }; static const struct nft_expr_ops * diff --git a/net/netfilter/nft_immediate.c b/net/netfilter/nft_immediate.c index 90c64d27ae5322..d0f67d325bdfd3 100644 --- a/net/netfilter/nft_immediate.c +++ b/net/netfilter/nft_immediate.c @@ -213,6 +213,16 @@ static int nft_immediate_offload(struct nft_offload_ctx *ctx, return 0; } +static bool nft_immediate_offload_action(const struct nft_expr *expr) +{ + const struct nft_immediate_expr *priv = nft_expr_priv(expr); + + if (priv->dreg == NFT_REG_VERDICT) + return true; + + return false; +} + static const struct nft_expr_ops nft_imm_ops = { .type = &nft_imm_type, .size = NFT_EXPR_SIZE(sizeof(struct nft_immediate_expr)), @@ -224,7 +234,7 @@ static const struct nft_expr_ops nft_imm_ops = { .dump = nft_immediate_dump, .validate = nft_immediate_validate, .offload = nft_immediate_offload, - .offload_flags = NFT_OFFLOAD_F_ACTION, + .offload_action = nft_immediate_offload_action, }; struct nft_expr_type nft_imm_type __read_mostly = { From e23e40fd6de5c1c94793bc4147e8f34387d58576 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sat, 5 Feb 2022 01:58:04 +0100 Subject: [PATCH 330/493] hwmon: (ntc_thermistor) Underscore Samsung thermistor The sysfs does not like that we name the thermistor something that contains a dash: ntc-thermistor thermistor: hwmon: 'ssg1404-001221' is not a valid name attribute, please fix Fix it up by switching to an underscore. Fixes: e13e979b2b3d ("hwmon: (ntc_thermistor) Add Samsung 1404-001221 NTC") Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20220205005804.123245-1-linus.walleij@linaro.org Signed-off-by: Guenter Roeck --- drivers/hwmon/ntc_thermistor.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c index 414204f5704c10..9c9e9f4ccb9e93 100644 --- a/drivers/hwmon/ntc_thermistor.c +++ b/drivers/hwmon/ntc_thermistor.c @@ -59,7 +59,7 @@ static const struct platform_device_id ntc_thermistor_id[] = { [NTC_NCP15XH103] = { "ncp15xh103", TYPE_NCPXXXH103 }, [NTC_NCP18WB473] = { "ncp18wb473", TYPE_NCPXXWB473 }, [NTC_NCP21WB473] = { "ncp21wb473", TYPE_NCPXXWB473 }, - [NTC_SSG1404001221] = { "ssg1404-001221", TYPE_NCPXXWB473 }, + [NTC_SSG1404001221] = { "ssg1404_001221", TYPE_NCPXXWB473 }, [NTC_LAST] = { }, }; From c94afc46cae7ad41b2ad6a99368147879f4b0e56 Mon Sep 17 00:00:00 2001 From: Miaohe Lin Date: Thu, 17 Feb 2022 22:53:27 +0800 Subject: [PATCH 331/493] memblock: use kfree() to release kmalloced memblock regions memblock.{reserved,memory}.regions may be allocated using kmalloc() in memblock_double_array(). Use kfree() to release these kmalloced regions indicated by memblock_{reserved,memory}_in_slab. Signed-off-by: Miaohe Lin Fixes: 3010f876500f ("mm: discard memblock data later") Signed-off-by: Mike Rapoport --- mm/memblock.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/mm/memblock.c b/mm/memblock.c index 1018e50566f35a..b12a364f2766fd 100644 --- a/mm/memblock.c +++ b/mm/memblock.c @@ -366,14 +366,20 @@ void __init memblock_discard(void) addr = __pa(memblock.reserved.regions); size = PAGE_ALIGN(sizeof(struct memblock_region) * memblock.reserved.max); - memblock_free_late(addr, size); + if (memblock_reserved_in_slab) + kfree(memblock.reserved.regions); + else + memblock_free_late(addr, size); } if (memblock.memory.regions != memblock_memory_init_regions) { addr = __pa(memblock.memory.regions); size = PAGE_ALIGN(sizeof(struct memblock_region) * memblock.memory.max); - memblock_free_late(addr, size); + if (memblock_memory_in_slab) + kfree(memblock.memory.regions); + else + memblock_free_late(addr, size); } memblock_memory = NULL; From 84d3c83e6ea7d46cf3de3a54578af73eb24a64f2 Mon Sep 17 00:00:00 2001 From: Somnath Kotur Date: Sun, 20 Feb 2022 04:05:47 -0500 Subject: [PATCH 332/493] bnxt_en: Fix active FEC reporting to ethtool ethtool --show-fec does not show anything when the Active FEC setting in the chip is set to None. Fix it to properly return ETHTOOL_FEC_OFF in that case. Fixes: 8b2775890ad8 ("bnxt_en: Report FEC settings to ethtool.") Signed-off-by: Somnath Kotur Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c index 003330e8cd58bd..e195f4a669d8da 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c @@ -1969,6 +1969,9 @@ static int bnxt_get_fecparam(struct net_device *dev, case PORT_PHY_QCFG_RESP_ACTIVE_FEC_FEC_RS272_IEEE_ACTIVE: fec->active_fec |= ETHTOOL_FEC_LLRS; break; + case PORT_PHY_QCFG_RESP_ACTIVE_FEC_FEC_NONE_ACTIVE: + fec->active_fec |= ETHTOOL_FEC_OFF; + break; } return 0; } From 6758f937669dba14c6aac7ca004edda42ec1b18d Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sun, 20 Feb 2022 04:05:48 -0500 Subject: [PATCH 333/493] bnxt_en: Fix offline ethtool selftest with RDMA enabled For offline (destructive) self tests, we need to stop the RDMA driver first. Otherwise, the RDMA driver will run into unrecoverable errors when destructive firmware tests are being performed. The irq_re_init parameter used in the half close and half open sequence when preparing the NIC for offline tests should be set to true because the RDMA driver will free all IRQs before the offline tests begin. Fixes: 55fd0cf320c3 ("bnxt_en: Add external loopback test to ethtool selftest.") Reviewed-by: Edwin Peer Reviewed-by: Ben Li Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 10 +++++----- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 12 +++++++++--- 2 files changed, 14 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 4f94136a011a19..23bbb1c5812dfc 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -10330,12 +10330,12 @@ int bnxt_half_open_nic(struct bnxt *bp) goto half_open_err; } - rc = bnxt_alloc_mem(bp, false); + rc = bnxt_alloc_mem(bp, true); if (rc) { netdev_err(bp->dev, "bnxt_alloc_mem err: %x\n", rc); goto half_open_err; } - rc = bnxt_init_nic(bp, false); + rc = bnxt_init_nic(bp, true); if (rc) { netdev_err(bp->dev, "bnxt_init_nic err: %x\n", rc); goto half_open_err; @@ -10344,7 +10344,7 @@ int bnxt_half_open_nic(struct bnxt *bp) half_open_err: bnxt_free_skbs(bp); - bnxt_free_mem(bp, false); + bnxt_free_mem(bp, true); dev_close(bp->dev); return rc; } @@ -10354,9 +10354,9 @@ int bnxt_half_open_nic(struct bnxt *bp) */ void bnxt_half_close_nic(struct bnxt *bp) { - bnxt_hwrm_resource_free(bp, false, false); + bnxt_hwrm_resource_free(bp, false, true); bnxt_free_skbs(bp); - bnxt_free_mem(bp, false); + bnxt_free_mem(bp, true); } void bnxt_reenable_sriov(struct bnxt *bp) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c index e195f4a669d8da..a85b18858b3240 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c @@ -25,6 +25,7 @@ #include "bnxt_hsi.h" #include "bnxt.h" #include "bnxt_hwrm.h" +#include "bnxt_ulp.h" #include "bnxt_xdp.h" #include "bnxt_ptp.h" #include "bnxt_ethtool.h" @@ -3551,9 +3552,12 @@ static void bnxt_self_test(struct net_device *dev, struct ethtool_test *etest, if (!offline) { bnxt_run_fw_tests(bp, test_mask, &test_results); } else { - rc = bnxt_close_nic(bp, false, false); - if (rc) + bnxt_ulp_stop(bp); + rc = bnxt_close_nic(bp, true, false); + if (rc) { + bnxt_ulp_start(bp, rc); return; + } bnxt_run_fw_tests(bp, test_mask, &test_results); buf[BNXT_MACLPBK_TEST_IDX] = 1; @@ -3563,6 +3567,7 @@ static void bnxt_self_test(struct net_device *dev, struct ethtool_test *etest, if (rc) { bnxt_hwrm_mac_loopback(bp, false); etest->flags |= ETH_TEST_FL_FAILED; + bnxt_ulp_start(bp, rc); return; } if (bnxt_run_loopback(bp)) @@ -3588,7 +3593,8 @@ static void bnxt_self_test(struct net_device *dev, struct ethtool_test *etest, } bnxt_hwrm_phy_loopback(bp, false, false); bnxt_half_close_nic(bp); - rc = bnxt_open_nic(bp, false, true); + rc = bnxt_open_nic(bp, true, true); + bnxt_ulp_start(bp, rc); } if (rc || bnxt_test_irq(bp)) { buf[BNXT_IRQ_TEST_IDX] = 1; From cfcab3b3b61584a02bb523ffa99564eafa761dfe Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sun, 20 Feb 2022 04:05:49 -0500 Subject: [PATCH 334/493] bnxt_en: Fix occasional ethtool -t loopback test failures In the current code, we setup the port to PHY or MAC loopback mode and then transmit a test broadcast packet for the loopback test. This scheme fails sometime if the port is shared with management firmware that can also send packets. The driver may receive the management firmware's packet and the test will fail when the contents don't match the test packet. Change the test packet to use it's own MAC address as the destination and setup the port to only receive it's own MAC address. This should filter out other packets sent by management firmware. Fixes: 91725d89b97a ("bnxt_en: Add PHY loopback to ethtool self-test.") Reviewed-by: Pavan Chebbi Reviewed-by: Edwin Peer Reviewed-by: Andy Gospodarek Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 7 +++++++ drivers/net/ethernet/broadcom/bnxt/bnxt.h | 1 + drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 2 +- 3 files changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 23bbb1c5812dfc..785436f6dd2446 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -8639,6 +8639,9 @@ static int bnxt_init_chip(struct bnxt *bp, bool irq_re_init) vnic->uc_filter_count = 1; vnic->rx_mask = 0; + if (test_bit(BNXT_STATE_HALF_OPEN, &bp->state)) + goto skip_rx_mask; + if (bp->dev->flags & IFF_BROADCAST) vnic->rx_mask |= CFA_L2_SET_RX_MASK_REQ_MASK_BCAST; @@ -8659,6 +8662,7 @@ static int bnxt_init_chip(struct bnxt *bp, bool irq_re_init) if (rc) goto err_out; +skip_rx_mask: rc = bnxt_hwrm_set_coal(bp); if (rc) netdev_warn(bp->dev, "HWRM set coalescing failure rc: %x\n", @@ -10335,8 +10339,10 @@ int bnxt_half_open_nic(struct bnxt *bp) netdev_err(bp->dev, "bnxt_alloc_mem err: %x\n", rc); goto half_open_err; } + set_bit(BNXT_STATE_HALF_OPEN, &bp->state); rc = bnxt_init_nic(bp, true); if (rc) { + clear_bit(BNXT_STATE_HALF_OPEN, &bp->state); netdev_err(bp->dev, "bnxt_init_nic err: %x\n", rc); goto half_open_err; } @@ -10357,6 +10363,7 @@ void bnxt_half_close_nic(struct bnxt *bp) bnxt_hwrm_resource_free(bp, false, true); bnxt_free_skbs(bp); bnxt_free_mem(bp, true); + clear_bit(BNXT_STATE_HALF_OPEN, &bp->state); } void bnxt_reenable_sriov(struct bnxt *bp) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h index 440dfeb4948bc6..666fc1e7a7d2f5 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h @@ -1921,6 +1921,7 @@ struct bnxt { #define BNXT_STATE_RECOVER 12 #define BNXT_STATE_FW_NON_FATAL_COND 13 #define BNXT_STATE_FW_ACTIVATE_RESET 14 +#define BNXT_STATE_HALF_OPEN 15 /* For offline ethtool tests */ #define BNXT_NO_FW_ACCESS(bp) \ (test_bit(BNXT_STATE_FW_FATAL_COND, &(bp)->state) || \ diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c index a85b18858b3240..8aaa2335f848aa 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c @@ -3458,7 +3458,7 @@ static int bnxt_run_loopback(struct bnxt *bp) if (!skb) return -ENOMEM; data = skb_put(skb, pkt_size); - eth_broadcast_addr(data); + ether_addr_copy(&data[i], bp->dev->dev_addr); i += ETH_ALEN; ether_addr_copy(&data[i], bp->dev->dev_addr); i += ETH_ALEN; From 8cdb15924252e27af16c4a8fe0fc606ce5fd04dc Mon Sep 17 00:00:00 2001 From: Pavan Chebbi Date: Sun, 20 Feb 2022 04:05:50 -0500 Subject: [PATCH 335/493] bnxt_en: Fix incorrect multicast rx mask setting when not requested We should setup multicast only when net_device flags explicitly has IFF_MULTICAST set. Otherwise we will incorrectly turn it on even when not asked. Fix it by only passing the multicast table to the firmware if IFF_MULTICAST is set. Fixes: 7d2837dd7a32 ("bnxt_en: Setup multicast properly after resetting device.") Signed-off-by: Pavan Chebbi Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 785436f6dd2446..fc5b1d816bdb30 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -4747,8 +4747,10 @@ static int bnxt_hwrm_cfa_l2_set_rx_mask(struct bnxt *bp, u16 vnic_id) return rc; req->vnic_id = cpu_to_le32(vnic->fw_vnic_id); - req->num_mc_entries = cpu_to_le32(vnic->mc_list_count); - req->mc_tbl_addr = cpu_to_le64(vnic->mc_list_mapping); + if (vnic->rx_mask & CFA_L2_SET_RX_MASK_REQ_MASK_MCAST) { + req->num_mc_entries = cpu_to_le32(vnic->mc_list_count); + req->mc_tbl_addr = cpu_to_le64(vnic->mc_list_mapping); + } req->mask = cpu_to_le32(vnic->rx_mask); return hwrm_req_send_silent(bp, req); } @@ -8651,7 +8653,7 @@ static int bnxt_init_chip(struct bnxt *bp, bool irq_re_init) if (bp->dev->flags & IFF_ALLMULTI) { vnic->rx_mask |= CFA_L2_SET_RX_MASK_REQ_MASK_ALL_MCAST; vnic->mc_list_count = 0; - } else { + } else if (bp->dev->flags & IFF_MULTICAST) { u32 mask = 0; bnxt_mc_list_updated(bp, &mask); @@ -10779,7 +10781,7 @@ static void bnxt_set_rx_mode(struct net_device *dev) if (dev->flags & IFF_ALLMULTI) { mask |= CFA_L2_SET_RX_MASK_REQ_MASK_ALL_MCAST; vnic->mc_list_count = 0; - } else { + } else if (dev->flags & IFF_MULTICAST) { mc_update = bnxt_mc_list_updated(bp, &mask); } @@ -10856,9 +10858,10 @@ static int bnxt_cfg_rx_mode(struct bnxt *bp) !bnxt_promisc_ok(bp)) vnic->rx_mask &= ~CFA_L2_SET_RX_MASK_REQ_MASK_PROMISCUOUS; rc = bnxt_hwrm_cfa_l2_set_rx_mask(bp, 0); - if (rc && vnic->mc_list_count) { + if (rc && (vnic->rx_mask & CFA_L2_SET_RX_MASK_REQ_MASK_MCAST)) { netdev_info(bp->dev, "Failed setting MC filters rc: %d, turning on ALL_MCAST mode\n", rc); + vnic->rx_mask &= ~CFA_L2_SET_RX_MASK_REQ_MASK_MCAST; vnic->rx_mask |= CFA_L2_SET_RX_MASK_REQ_MASK_ALL_MCAST; vnic->mc_list_count = 0; rc = bnxt_hwrm_cfa_l2_set_rx_mask(bp, 0); From 0e0e3c5358470cbad10bd7ca29f84a44d179d286 Mon Sep 17 00:00:00 2001 From: Kalesh AP Date: Sun, 20 Feb 2022 04:05:51 -0500 Subject: [PATCH 336/493] bnxt_en: Restore the resets_reliable flag in bnxt_open() During ifdown, we call bnxt_inv_fw_health_reg() which will clear both the status_reliable and resets_reliable flags if these registers are mapped. This is correct because a FW reset during ifdown will clear these register mappings. If we detect that FW has gone through reset during the next ifup, we will remap these registers. But during normal ifup with no FW reset, we need to restore the resets_reliable flag otherwise we will not show the reset counter during devlink diagnose. Fixes: 8cc95ceb7087 ("bnxt_en: improve fw diagnose devlink health messages") Reviewed-by: Vikas Gupta Reviewed-by: Pavan Chebbi Reviewed-by: Somnath Kotur Signed-off-by: Kalesh AP Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index fc5b1d816bdb30..b1c98d1408b826 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -7789,6 +7789,19 @@ static int bnxt_map_fw_health_regs(struct bnxt *bp) return 0; } +static void bnxt_remap_fw_health_regs(struct bnxt *bp) +{ + if (!bp->fw_health) + return; + + if (bp->fw_cap & BNXT_FW_CAP_ERROR_RECOVERY) { + bp->fw_health->status_reliable = true; + bp->fw_health->resets_reliable = true; + } else { + bnxt_try_map_fw_health_reg(bp); + } +} + static int bnxt_hwrm_error_recovery_qcfg(struct bnxt *bp) { struct bnxt_fw_health *fw_health = bp->fw_health; @@ -9856,8 +9869,8 @@ static int bnxt_hwrm_if_change(struct bnxt *bp, bool up) resc_reinit = true; if (flags & FUNC_DRV_IF_CHANGE_RESP_FLAGS_HOT_FW_RESET_DONE) fw_reset = true; - else if (bp->fw_health && !bp->fw_health->status_reliable) - bnxt_try_map_fw_health_reg(bp); + else + bnxt_remap_fw_health_regs(bp); if (test_bit(BNXT_STATE_IN_FW_RESET, &bp->state) && !fw_reset) { netdev_err(bp->dev, "RESET_DONE not set during FW reset.\n"); From b891106da52b2c12dbaf73400f6d225b06a38d80 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sun, 20 Feb 2022 04:05:52 -0500 Subject: [PATCH 337/493] bnxt_en: Increase firmware message response DMA wait time When polling for the firmware message response, we first poll for the response message header. Once the valid length is detected in the header, we poll for the valid bit at the end of the message which signals DMA completion. Normally, this poll time for DMA completion is extremely short (0 to a few usec). But on some devices under some rare conditions, it can be up to about 20 msec. Increase this delay to 50 msec and use udelay() for the first 10 usec for the common case, and usleep_range() beyond that. Also, change the error message to include the above delay time when printing the timeout value. Fixes: 3c8c20db769c ("bnxt_en: move HWRM API implementation into separate file") Reviewed-by: Vladimir Olovyannikov Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c | 12 +++++++++--- drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h | 2 +- 2 files changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c index 566c9487ef556d..b01d42928a53c5 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c @@ -644,17 +644,23 @@ static int __hwrm_send(struct bnxt *bp, struct bnxt_hwrm_ctx *ctx) /* Last byte of resp contains valid bit */ valid = ((u8 *)ctx->resp) + len - 1; - for (j = 0; j < HWRM_VALID_BIT_DELAY_USEC; j++) { + for (j = 0; j < HWRM_VALID_BIT_DELAY_USEC; ) { /* make sure we read from updated DMA memory */ dma_rmb(); if (*valid) break; - usleep_range(1, 5); + if (j < 10) { + udelay(1); + j++; + } else { + usleep_range(20, 30); + j += 20; + } } if (j >= HWRM_VALID_BIT_DELAY_USEC) { hwrm_err(bp, ctx, "Error (timeout: %u) msg {0x%x 0x%x} len:%d v:%d\n", - hwrm_total_timeout(i), req_type, + hwrm_total_timeout(i) + j, req_type, le16_to_cpu(ctx->req->seq_id), len, *valid); goto exit; } diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h index d52bd2d63aec06..c98032e381881d 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h @@ -90,7 +90,7 @@ static inline unsigned int hwrm_total_timeout(unsigned int n) } -#define HWRM_VALID_BIT_DELAY_USEC 150 +#define HWRM_VALID_BIT_DELAY_USEC 50000 static inline bool bnxt_cfa_hwrm_message(u16 req_type) { From 1278d17a1fb860e7eab4bc3ff4b026a87cbf5105 Mon Sep 17 00:00:00 2001 From: Kalesh AP Date: Sun, 20 Feb 2022 04:05:53 -0500 Subject: [PATCH 338/493] bnxt_en: Fix devlink fw_activate To install a livepatch, first flash the package to NVM, and then activate the patch through the "HWRM_FW_LIVEPATCH" fw command. To uninstall a patch from NVM, flash the removal package and then activate it through the "HWRM_FW_LIVEPATCH" fw command. The "HWRM_FW_LIVEPATCH" fw command has to consider following scenarios: 1. no patch in NVM and no patch active. Do nothing. 2. patch in NVM, but not active. Activate the patch currently in NVM. 3. patch is not in NVM, but active. Deactivate the patch. 4. patch in NVM and the patch active. Do nothing. Fix the code to handle these scenarios during devlink "fw_activate". To install and activate a live patch: devlink dev flash pci/0000:c1:00.0 file thor_patch.pkg devlink -f dev reload pci/0000:c1:00.0 action fw_activate limit no_reset To remove and deactivate a live patch: devlink dev flash pci/0000:c1:00.0 file thor_patch_rem.pkg devlink -f dev reload pci/0000:c1:00.0 action fw_activate limit no_reset Fixes: 3c4153394e2c ("bnxt_en: implement firmware live patching") Reviewed-by: Vikas Gupta Reviewed-by: Somnath Kotur Signed-off-by: Kalesh AP Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- .../net/ethernet/broadcom/bnxt/bnxt_devlink.c | 39 +++++++++++++++---- 1 file changed, 31 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c index 4da31b1b84f9c2..f6e21fac0e690d 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c @@ -367,6 +367,16 @@ bnxt_dl_livepatch_report_err(struct bnxt *bp, struct netlink_ext_ack *extack, } } +/* Live patch status in NVM */ +#define BNXT_LIVEPATCH_NOT_INSTALLED 0 +#define BNXT_LIVEPATCH_INSTALLED FW_LIVEPATCH_QUERY_RESP_STATUS_FLAGS_INSTALL +#define BNXT_LIVEPATCH_REMOVED FW_LIVEPATCH_QUERY_RESP_STATUS_FLAGS_ACTIVE +#define BNXT_LIVEPATCH_MASK (FW_LIVEPATCH_QUERY_RESP_STATUS_FLAGS_INSTALL | \ + FW_LIVEPATCH_QUERY_RESP_STATUS_FLAGS_ACTIVE) +#define BNXT_LIVEPATCH_ACTIVATED BNXT_LIVEPATCH_MASK + +#define BNXT_LIVEPATCH_STATE(flags) ((flags) & BNXT_LIVEPATCH_MASK) + static int bnxt_dl_livepatch_activate(struct bnxt *bp, struct netlink_ext_ack *extack) { @@ -374,8 +384,9 @@ bnxt_dl_livepatch_activate(struct bnxt *bp, struct netlink_ext_ack *extack) struct hwrm_fw_livepatch_query_input *query_req; struct hwrm_fw_livepatch_output *patch_resp; struct hwrm_fw_livepatch_input *patch_req; + u16 flags, live_patch_state; + bool activated = false; u32 installed = 0; - u16 flags; u8 target; int rc; @@ -394,7 +405,6 @@ bnxt_dl_livepatch_activate(struct bnxt *bp, struct netlink_ext_ack *extack) hwrm_req_drop(bp, query_req); return rc; } - patch_req->opcode = FW_LIVEPATCH_REQ_OPCODE_ACTIVATE; patch_req->loadtype = FW_LIVEPATCH_REQ_LOADTYPE_NVM_INSTALL; patch_resp = hwrm_req_hold(bp, patch_req); @@ -407,12 +417,20 @@ bnxt_dl_livepatch_activate(struct bnxt *bp, struct netlink_ext_ack *extack) } flags = le16_to_cpu(query_resp->status_flags); - if (~flags & FW_LIVEPATCH_QUERY_RESP_STATUS_FLAGS_INSTALL) + live_patch_state = BNXT_LIVEPATCH_STATE(flags); + + if (live_patch_state == BNXT_LIVEPATCH_NOT_INSTALLED) continue; - if ((flags & FW_LIVEPATCH_QUERY_RESP_STATUS_FLAGS_ACTIVE) && - !strncmp(query_resp->active_ver, query_resp->install_ver, - sizeof(query_resp->active_ver))) + + if (live_patch_state == BNXT_LIVEPATCH_ACTIVATED) { + activated = true; continue; + } + + if (live_patch_state == BNXT_LIVEPATCH_INSTALLED) + patch_req->opcode = FW_LIVEPATCH_REQ_OPCODE_ACTIVATE; + else if (live_patch_state == BNXT_LIVEPATCH_REMOVED) + patch_req->opcode = FW_LIVEPATCH_REQ_OPCODE_DEACTIVATE; patch_req->fw_target = target; rc = hwrm_req_send(bp, patch_req); @@ -424,8 +442,13 @@ bnxt_dl_livepatch_activate(struct bnxt *bp, struct netlink_ext_ack *extack) } if (!rc && !installed) { - NL_SET_ERR_MSG_MOD(extack, "No live patches found"); - rc = -ENOENT; + if (activated) { + NL_SET_ERR_MSG_MOD(extack, "Live patch already activated"); + rc = -EEXIST; + } else { + NL_SET_ERR_MSG_MOD(extack, "No live patches found"); + rc = -ENOENT; + } } hwrm_req_drop(bp, query_req); hwrm_req_drop(bp, patch_req); From cfb92440ee71adcc2105b0890bb01ac3cddb8507 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 20 Feb 2022 13:07:20 -0800 Subject: [PATCH 339/493] Linux 5.17-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 51e142f760f7c7..289ce2be8032a4 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 5 PATCHLEVEL = 17 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Superb Owl # *DOCUMENTATION* From ba1366f3d039e7c3ca1fc29ed00ce3ed2b8fd32f Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 13 Feb 2022 14:54:05 +0100 Subject: [PATCH 340/493] PCI: vmd: Prevent recursive locking on interrupt allocation Tejas reported the following recursive locking issue: swapper/0/1 is trying to acquire lock: ffff8881074fd0a0 (&md->mutex){+.+.}-{3:3}, at: msi_get_virq+0x30/0xc0 but task is already holding lock: ffff8881017cd6a0 (&md->mutex){+.+.}-{3:3}, at: __pci_enable_msi_range+0xf2/0x290 stack backtrace: __mutex_lock+0x9d/0x920 msi_get_virq+0x30/0xc0 pci_irq_vector+0x26/0x30 vmd_msi_init+0xcc/0x210 msi_domain_alloc+0xbf/0x150 msi_domain_alloc_irqs_descs_locked+0x3e/0xb0 __pci_enable_msi_range+0x155/0x290 pci_alloc_irq_vectors_affinity+0xba/0x100 pcie_port_device_register+0x307/0x550 pcie_portdrv_probe+0x3c/0xd0 pci_device_probe+0x95/0x110 This is caused by the VMD MSI code which does a lookup of the Linux interrupt number for an VMD managed MSI[X] vector. The lookup function tries to acquire the already held mutex. Avoid that by caching the Linux interrupt number at initialization time instead of looking it up over and over. Fixes: 82ff8e6b78fc ("PCI/MSI: Use msi_get_virq() in pci_get_vector()") Reported-by: "Surendrakumar Upadhyay, TejaskumarX" Signed-off-by: Thomas Gleixner Tested-by: "Surendrakumar Upadhyay, TejaskumarX" Cc: linux-pci@vger.kernel.org Link: https://lore.kernel.org/r/87a6euub2a.ffs@tglx --- drivers/pci/controller/vmd.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c index cc166c68363871..eb05cceab964fd 100644 --- a/drivers/pci/controller/vmd.c +++ b/drivers/pci/controller/vmd.c @@ -99,11 +99,13 @@ struct vmd_irq { * @srcu: SRCU struct for local synchronization. * @count: number of child IRQs assigned to this vector; used to track * sharing. + * @virq: The underlying VMD Linux interrupt number */ struct vmd_irq_list { struct list_head irq_list; struct srcu_struct srcu; unsigned int count; + unsigned int virq; }; struct vmd_dev { @@ -253,7 +255,6 @@ static int vmd_msi_init(struct irq_domain *domain, struct msi_domain_info *info, struct msi_desc *desc = arg->desc; struct vmd_dev *vmd = vmd_from_bus(msi_desc_to_pci_dev(desc)->bus); struct vmd_irq *vmdirq = kzalloc(sizeof(*vmdirq), GFP_KERNEL); - unsigned int index, vector; if (!vmdirq) return -ENOMEM; @@ -261,10 +262,8 @@ static int vmd_msi_init(struct irq_domain *domain, struct msi_domain_info *info, INIT_LIST_HEAD(&vmdirq->node); vmdirq->irq = vmd_next_irq(vmd, desc); vmdirq->virq = virq; - index = index_from_irqs(vmd, vmdirq->irq); - vector = pci_irq_vector(vmd->dev, index); - irq_domain_set_info(domain, virq, vector, info->chip, vmdirq, + irq_domain_set_info(domain, virq, vmdirq->irq->virq, info->chip, vmdirq, handle_untracked_irq, vmd, NULL); return 0; } @@ -685,7 +684,8 @@ static int vmd_alloc_irqs(struct vmd_dev *vmd) return err; INIT_LIST_HEAD(&vmd->irqs[i].irq_list); - err = devm_request_irq(&dev->dev, pci_irq_vector(dev, i), + vmd->irqs[i].virq = pci_irq_vector(dev, i); + err = devm_request_irq(&dev->dev, vmd->irqs[i].virq, vmd_irq, IRQF_NO_THREAD, vmd->name, &vmd->irqs[i]); if (err) @@ -969,7 +969,7 @@ static int vmd_suspend(struct device *dev) int i; for (i = 0; i < vmd->msix_count; i++) - devm_free_irq(dev, pci_irq_vector(pdev, i), &vmd->irqs[i]); + devm_free_irq(dev, vmd->irqs[i].virq, &vmd->irqs[i]); return 0; } @@ -981,7 +981,7 @@ static int vmd_resume(struct device *dev) int err, i; for (i = 0; i < vmd->msix_count; i++) { - err = devm_request_irq(dev, pci_irq_vector(pdev, i), + err = devm_request_irq(dev, vmd->irqs[i].virq, vmd_irq, IRQF_NO_THREAD, vmd->name, &vmd->irqs[i]); if (err) From 198a7ebd5fa17b4d0be8cb70240ee1be885175c0 Mon Sep 17 00:00:00 2001 From: Dmytro Bagrii Date: Thu, 10 Feb 2022 18:41:37 +0200 Subject: [PATCH 341/493] Revert "USB: serial: ch341: add new Product ID for CH341A" This reverts commit 46ee4abb10a07bd8f8ce910ee6b4ae6a947d7f63. CH341 has Product ID 0x5512 in EPP/MEM mode which is used for I2C/SPI/GPIO interfaces. In asynchronous serial interface mode CH341 has PID 0x5523 which is already in the table. Mode is selected by corresponding jumper setting. Signed-off-by: Dmytro Bagrii Link: https://lore.kernel.org/r/20220210164137.4376-1-dimich.dmb@gmail.com Link: https://lore.kernel.org/r/YJ0OCS/sh+1ifD/q@hovoldconsulting.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/ch341.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 58cba8ee0277ae..2798fca712612b 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -81,7 +81,6 @@ #define CH341_QUIRK_SIMULATE_BREAK BIT(1) static const struct usb_device_id id_table[] = { - { USB_DEVICE(0x1a86, 0x5512) }, { USB_DEVICE(0x1a86, 0x5523) }, { USB_DEVICE(0x1a86, 0x7522) }, { USB_DEVICE(0x1a86, 0x7523) }, From 6ecb3f0b18b320320460a42e40d6fb603f6ded96 Mon Sep 17 00:00:00 2001 From: Slark Xiao Date: Mon, 14 Feb 2022 10:14:01 +0800 Subject: [PATCH 342/493] USB: serial: option: add support for DW5829e Dell DW5829e same as DW5821e except CAT level. DW5821e supports CAT16 but DW5829e supports CAT9. There are 2 types product of DW5829e: normal and eSIM. So we will add 2 PID for DW5829e. And for each PID, it support MBIM or RMNET. Let's see test evidence as below: DW5829e MBIM mode: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 2 P: Vendor=413c ProdID=81e6 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) DW5829e RMNET mode: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e6 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option DW5829e-eSIM MBIM mode: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 6 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 2 P: Vendor=413c ProdID=81e4 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) DW5829e-eSIM RMNET mode: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e4 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option BTW, the interface 0x6 of MBIM mode is GNSS port, which not same as NMEA port. So it's banned from serial option driver. The remaining interfaces 0x2-0x5 are: MODEM, MODEM, NMEA, DIAG. Signed-off-by: Slark Xiao Link: https://lore.kernel.org/r/20220214021401.6264-1-slark_xiao@163.com [ johan: drop unnecessary reservation of interface 1 ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 962e9943fc20ec..58daf021fa2a46 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -198,6 +198,8 @@ static void option_instat_callback(struct urb *urb); #define DELL_PRODUCT_5821E 0x81d7 #define DELL_PRODUCT_5821E_ESIM 0x81e0 +#define DELL_PRODUCT_5829E_ESIM 0x81e4 +#define DELL_PRODUCT_5829E 0x81e6 #define KYOCERA_VENDOR_ID 0x0c88 #define KYOCERA_PRODUCT_KPC650 0x17da @@ -1063,6 +1065,10 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5821E_ESIM), .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5829E), + .driver_info = RSVD(0) | RSVD(6) }, + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5829E_ESIM), + .driver_info = RSVD(0) | RSVD(6) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, /* ADU-E100, ADU-310 */ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) }, From cfc4442c642d568014474b6718ccf65dc7ca6099 Mon Sep 17 00:00:00 2001 From: Daniele Palmas Date: Fri, 18 Feb 2022 14:45:52 +0100 Subject: [PATCH 343/493] USB: serial: option: add Telit LE910R1 compositions Add support for the following Telit LE910R1 compositions: 0x701a: rndis, tty, tty, tty 0x701b: ecm, tty, tty, tty 0x9201: tty Signed-off-by: Daniele Palmas Link: https://lore.kernel.org/r/20220218134552.4051-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 58daf021fa2a46..e7755d9cfc61a2 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1279,10 +1279,16 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(2) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x7011, 0xff), /* Telit LE910-S1 (ECM) */ .driver_info = NCTRL(2) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x701a, 0xff), /* Telit LE910R1 (RNDIS) */ + .driver_info = NCTRL(2) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x701b, 0xff), /* Telit LE910R1 (ECM) */ + .driver_info = NCTRL(2) }, { USB_DEVICE(TELIT_VENDOR_ID, 0x9010), /* Telit SBL FN980 flashing device */ .driver_info = NCTRL(0) | ZLP }, { USB_DEVICE(TELIT_VENDOR_ID, 0x9200), /* Telit LE910S1 flashing device */ .driver_info = NCTRL(0) | ZLP }, + { USB_DEVICE(TELIT_VENDOR_ID, 0x9201), /* Telit LE910R1 flashing device */ + .driver_info = NCTRL(0) | ZLP }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff), .driver_info = RSVD(1) }, From 3f33364836aacc28cd430d22cf22379e3b5ecd77 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Mon, 14 Feb 2022 11:18:08 +0200 Subject: [PATCH 344/493] drm/i915: Widen the QGV point mask MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit adlp+ adds some extra bits to the QGV point mask. The code attempts to handle that but forgot to actually make sure we can store those bits in the bw state. Fix it. Cc: stable@vger.kernel.org Cc: Stanislav Lisovskiy Fixes: 192fbfb76744 ("drm/i915: Implement PSF GV point support") Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20220214091811.13725-4-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy (cherry picked from commit c0299cc9840b3805205173cc77782f317b78ea0e) Signed-off-by: Tvrtko Ursulin --- drivers/gpu/drm/i915/display/intel_bw.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_bw.h b/drivers/gpu/drm/i915/display/intel_bw.h index 46c6eecbd9175b..0ceaed1c96562a 100644 --- a/drivers/gpu/drm/i915/display/intel_bw.h +++ b/drivers/gpu/drm/i915/display/intel_bw.h @@ -30,19 +30,19 @@ struct intel_bw_state { */ u8 pipe_sagv_reject; + /* bitmask of active pipes */ + u8 active_pipes; + /* * Current QGV points mask, which restricts * some particular SAGV states, not to confuse * with pipe_sagv_mask. */ - u8 qgv_points_mask; + u16 qgv_points_mask; unsigned int data_rate[I915_MAX_PIPES]; u8 num_active_planes[I915_MAX_PIPES]; - /* bitmask of active pipes */ - u8 active_pipes; - int min_cdclk; }; From a40ee54e9a0958406469d46def03eec62aea0b69 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Thu, 17 Feb 2022 17:22:37 +0200 Subject: [PATCH 345/493] drm/i915: Disconnect PHYs left connected by BIOS on disabled ports MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit BIOS may leave a TypeC PHY in a connected state even though the corresponding port is disabled. This will prevent any hotplug events from being signalled (after the monitor deasserts and then reasserts its HPD) until the PHY is disconnected and so the driver will not detect a connected sink. Rebooting with the PHY in the connected state also results in a system hang. Fix the above by disconnecting TypeC PHYs on disabled ports. Before commit 64851a32c463e5 the PHY connected state was read out even for disabled ports and later the PHY got disconnected as a side effect of a tc_port_lock/unlock() sequence (during connector probing), hence recovering the port's hotplug functionality. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5014 Fixes: 64851a32c463 ("drm/i915/tc: Add a mode for the TypeC PHY's disconnected state") Cc: # v5.16+ Cc: José Roberto de Souza Signed-off-by: Imre Deak Reviewed-by: José Roberto de Souza Link: https://patchwork.freedesktop.org/patch/msgid/20220217152237.670220-1-imre.deak@intel.com (cherry picked from commit ed0ccf349ffd9c80e7376d4d8c608643de990e86) Signed-off-by: Tvrtko Ursulin --- drivers/gpu/drm/i915/display/intel_tc.c | 26 +++++++++++++++++++------ 1 file changed, 20 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_tc.c b/drivers/gpu/drm/i915/display/intel_tc.c index dbd7d0d83a141c..7784c30fe89370 100644 --- a/drivers/gpu/drm/i915/display/intel_tc.c +++ b/drivers/gpu/drm/i915/display/intel_tc.c @@ -691,6 +691,8 @@ void intel_tc_port_sanitize(struct intel_digital_port *dig_port) { struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev); struct intel_encoder *encoder = &dig_port->base; + intel_wakeref_t tc_cold_wref; + enum intel_display_power_domain domain; int active_links = 0; mutex_lock(&dig_port->tc_lock); @@ -702,12 +704,11 @@ void intel_tc_port_sanitize(struct intel_digital_port *dig_port) drm_WARN_ON(&i915->drm, dig_port->tc_mode != TC_PORT_DISCONNECTED); drm_WARN_ON(&i915->drm, dig_port->tc_lock_wakeref); - if (active_links) { - enum intel_display_power_domain domain; - intel_wakeref_t tc_cold_wref = tc_cold_block(dig_port, &domain); - dig_port->tc_mode = intel_tc_port_get_current_mode(dig_port); + tc_cold_wref = tc_cold_block(dig_port, &domain); + dig_port->tc_mode = intel_tc_port_get_current_mode(dig_port); + if (active_links) { if (!icl_tc_phy_is_connected(dig_port)) drm_dbg_kms(&i915->drm, "Port %s: PHY disconnected with %d active link(s)\n", @@ -716,10 +717,23 @@ void intel_tc_port_sanitize(struct intel_digital_port *dig_port) dig_port->tc_lock_wakeref = tc_cold_block(dig_port, &dig_port->tc_lock_power_domain); - - tc_cold_unblock(dig_port, domain, tc_cold_wref); + } else { + /* + * TBT-alt is the default mode in any case the PHY ownership is not + * held (regardless of the sink's connected live state), so + * we'll just switch to disconnected mode from it here without + * a note. + */ + if (dig_port->tc_mode != TC_PORT_TBT_ALT) + drm_dbg_kms(&i915->drm, + "Port %s: PHY left in %s mode on disabled port, disconnecting it\n", + dig_port->tc_port_name, + tc_port_mode_name(dig_port->tc_mode)); + icl_tc_phy_disconnect(dig_port); } + tc_cold_unblock(dig_port, domain, tc_cold_wref); + drm_dbg_kms(&i915->drm, "Port %s: sanitize mode (%s)\n", dig_port->tc_port_name, tc_port_mode_name(dig_port->tc_mode)); From afc189df6bcc6be65961deb54e15ec60e7f85337 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 18 Feb 2022 08:40:34 +0200 Subject: [PATCH 346/493] drm/i915: Correctly populate use_sagv_wm for all pipes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When changing between SAGV vs. no SAGV on tgl+ we have to update the use_sagv_wm flag for all the crtcs or else an active pipe not already in the state will end up using the wrong watermarks. That is especially bad when we end up with the tighter non-SAGV watermarks with SAGV enabled. Usually ends up in underruns. Cc: stable@vger.kernel.org Reviewed-by: Stanislav Lisovskiy Fixes: 7241c57d3140 ("drm/i915: Add TGL+ SAGV support") Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20220218064039.12834-2-ville.syrjala@linux.intel.com (cherry picked from commit 8dd8ffb824ca7b897ce9f2082ffa7e64831c22dc) Signed-off-by: Tvrtko Ursulin --- drivers/gpu/drm/i915/intel_pm.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 32bc155f5dc0a3..fae4f7818d28b5 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -4029,6 +4029,17 @@ static int intel_compute_sagv_mask(struct intel_atomic_state *state) return ret; } + if (intel_can_enable_sagv(dev_priv, new_bw_state) != + intel_can_enable_sagv(dev_priv, old_bw_state)) { + ret = intel_atomic_serialize_global_state(&new_bw_state->base); + if (ret) + return ret; + } else if (new_bw_state->pipe_sagv_reject != old_bw_state->pipe_sagv_reject) { + ret = intel_atomic_lock_global_state(&new_bw_state->base); + if (ret) + return ret; + } + for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { struct skl_pipe_wm *pipe_wm = &new_crtc_state->wm.skl.optimal; @@ -4044,17 +4055,6 @@ static int intel_compute_sagv_mask(struct intel_atomic_state *state) intel_can_enable_sagv(dev_priv, new_bw_state); } - if (intel_can_enable_sagv(dev_priv, new_bw_state) != - intel_can_enable_sagv(dev_priv, old_bw_state)) { - ret = intel_atomic_serialize_global_state(&new_bw_state->base); - if (ret) - return ret; - } else if (new_bw_state->pipe_sagv_reject != old_bw_state->pipe_sagv_reject) { - ret = intel_atomic_lock_global_state(&new_bw_state->base); - if (ret) - return ret; - } - return 0; } From ec663bca9128f13eada25cd0446e7fcb5fcdc088 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 18 Feb 2022 08:40:35 +0200 Subject: [PATCH 347/493] drm/i915: Fix bw atomic check when switching between SAGV vs. no SAGV MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If the only thing that is changing is SAGV vs. no SAGV but the number of active planes and the total data rates end up unchanged we currently bail out of intel_bw_atomic_check() early and forget to actually compute the new WGV point mask and thus won't actually enable/disable SAGV as requested. This ends up poorly if we end up running with SAGV enabled when we shouldn't. Usually ends up in underruns. To fix this let's go through the QGV point mask computation if either the data rates/number of planes, or the state of SAGV is changing. v2: Check more carefully if things are changing to avoid the extra calculations/debugs from introducing unwanted overhead Cc: stable@vger.kernel.org Reviewed-by: Stanislav Lisovskiy #v1 Fixes: 20f505f22531 ("drm/i915: Restrict qgv points which don't have enough bandwidth.") Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20220218064039.12834-3-ville.syrjala@linux.intel.com (cherry picked from commit 6b728595ffa51c087343c716bccbfc260f120e72) Signed-off-by: Tvrtko Ursulin --- drivers/gpu/drm/i915/display/intel_bw.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_bw.c b/drivers/gpu/drm/i915/display/intel_bw.c index 2da4aacc956bb8..8ac196e814d5d3 100644 --- a/drivers/gpu/drm/i915/display/intel_bw.c +++ b/drivers/gpu/drm/i915/display/intel_bw.c @@ -825,6 +825,7 @@ int intel_bw_atomic_check(struct intel_atomic_state *state) unsigned int max_bw_point = 0, max_bw = 0; unsigned int num_qgv_points = dev_priv->max_bw[0].num_qgv_points; unsigned int num_psf_gv_points = dev_priv->max_bw[0].num_psf_gv_points; + bool changed = false; u32 mask = 0; /* FIXME earlier gens need some checks too */ @@ -868,6 +869,8 @@ int intel_bw_atomic_check(struct intel_atomic_state *state) new_bw_state->data_rate[crtc->pipe] = new_data_rate; new_bw_state->num_active_planes[crtc->pipe] = new_active_planes; + changed = true; + drm_dbg_kms(&dev_priv->drm, "pipe %c data rate %u num active planes %u\n", pipe_name(crtc->pipe), @@ -875,7 +878,19 @@ int intel_bw_atomic_check(struct intel_atomic_state *state) new_bw_state->num_active_planes[crtc->pipe]); } - if (!new_bw_state) + old_bw_state = intel_atomic_get_old_bw_state(state); + new_bw_state = intel_atomic_get_new_bw_state(state); + + if (new_bw_state && + intel_can_enable_sagv(dev_priv, old_bw_state) != + intel_can_enable_sagv(dev_priv, new_bw_state)) + changed = true; + + /* + * If none of our inputs (data rates, number of active + * planes, SAGV yes/no) changed then nothing to do here. + */ + if (!changed) return 0; ret = intel_atomic_lock_global_state(&new_bw_state->base); @@ -961,7 +976,6 @@ int intel_bw_atomic_check(struct intel_atomic_state *state) */ new_bw_state->qgv_points_mask = ~allowed_points & mask; - old_bw_state = intel_atomic_get_old_bw_state(state); /* * If the actual mask had changed we need to make sure that * the commits are serialized(in case this is a nomodeset, nonblocking) From 28adef861233c6fce47372ebd2070b55eaa8e899 Mon Sep 17 00:00:00 2001 From: Matt Roper Date: Tue, 15 Feb 2022 08:35:45 -0800 Subject: [PATCH 348/493] drm/i915/dg2: Print PHY name properly on calibration error We need to use phy_name() to convert the PHY value into a human-readable character in the error message. Fixes: a6a128116e55 ("drm/i915/dg2: Wait for SNPS PHY calibration during display init") Signed-off-by: Matt Roper Reviewed-by: Swathi Dhanavanthri Link: https://patchwork.freedesktop.org/patch/msgid/20220215163545.2175730-1-matthew.d.roper@intel.com (cherry picked from commit 84073e568eec7b586b2f6fd5fb2fb08f59edec54) Signed-off-by: Tvrtko Ursulin --- drivers/gpu/drm/i915/display/intel_snps_phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/display/intel_snps_phy.c b/drivers/gpu/drm/i915/display/intel_snps_phy.c index 09f405e4d363f6..92ff654f54f569 100644 --- a/drivers/gpu/drm/i915/display/intel_snps_phy.c +++ b/drivers/gpu/drm/i915/display/intel_snps_phy.c @@ -34,7 +34,7 @@ void intel_snps_phy_wait_for_calibration(struct drm_i915_private *dev_priv) if (intel_de_wait_for_clear(dev_priv, ICL_PHY_MISC(phy), DG2_PHY_DP_TX_ACK_MASK, 25)) DRM_ERROR("SNPS PHY %c failed to calibrate after 25ms.\n", - phy); + phy_name(phy)); } } From 93dd04ab0b2b32ae6e70284afc764c577156658e Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 18 Feb 2022 14:13:58 +0100 Subject: [PATCH 349/493] slab: remove __alloc_size attribute from __kmalloc_track_caller Commit c37495d6254c ("slab: add __alloc_size attributes for better bounds checking") added __alloc_size attributes to a bunch of kmalloc function prototypes. Unfortunately the change to __kmalloc_track_caller seems to cause clang to generate broken code and the first time this is called when booting, the box will crash. While the compiler problems are being reworked and attempted to be solved [1], let's just drop the attribute to solve the issue now. Once it is resolved it can be added back. [1] https://github.com/ClangBuiltLinux/linux/issues/1599 Fixes: c37495d6254c ("slab: add __alloc_size attributes for better bounds checking") Cc: stable Cc: Kees Cook Cc: Daniel Micay Cc: Nick Desaulniers Cc: Christoph Lameter Cc: Pekka Enberg Cc: Joonsoo Kim Cc: Andrew Morton Cc: Vlastimil Babka Cc: Nathan Chancellor Cc: linux-mm@kvack.org Cc: linux-kernel@vger.kernel.org Cc: llvm@lists.linux.dev Signed-off-by: Greg Kroah-Hartman Acked-by: Nick Desaulniers Acked-by: David Rientjes Acked-by: Kees Cook Signed-off-by: Vlastimil Babka Link: https://lore.kernel.org/r/20220218131358.3032912-1-gregkh@linuxfoundation.org --- include/linux/slab.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/include/linux/slab.h b/include/linux/slab.h index 37bde99b74af09..5b6193fd8bd993 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -660,8 +660,7 @@ static inline __alloc_size(1, 2) void *kcalloc(size_t n, size_t size, gfp_t flag * allocator where we care about the real place the memory allocation * request comes from. */ -extern void *__kmalloc_track_caller(size_t size, gfp_t flags, unsigned long caller) - __alloc_size(1); +extern void *__kmalloc_track_caller(size_t size, gfp_t flags, unsigned long caller); #define kmalloc_track_caller(size, flags) \ __kmalloc_track_caller(size, flags, _RET_IP_) From 221944736f66f38e9bdbce52c616d10df7f15c54 Mon Sep 17 00:00:00 2001 From: Roman Gushchin Date: Wed, 16 Feb 2022 12:43:30 -0800 Subject: [PATCH 350/493] tools/cgroup/slabinfo: update to work with struct slab After the introduction of the dedicated struct slab to describe slab pages by commit d122019bf061 ("mm: Split slab into its own type") and the following removal of the corresponding struct page's fields by commit 07f910f9b729 ("mm: Remove slab from struct page") the memcg_slabinfo tool broke. An attempt to run it produces a trace like this: Traceback (most recent call last): File "/usr/bin/drgn", line 33, in sys.exit(load_entry_point('drgn==0.0.16', 'console_scripts', 'drgn')()) File "/usr/lib64/python3.9/site-packages/drgn/internal/cli.py", line 133, in main runpy.run_path(args.script[0], init_globals=init_globals, run_name="__main__") File "/usr/lib64/python3.9/runpy.py", line 268, in run_path return _run_module_code(code, init_globals, run_name, File "/usr/lib64/python3.9/runpy.py", line 97, in _run_module_code _run_code(code, mod_globals, init_globals, File "/usr/lib64/python3.9/runpy.py", line 87, in _run_code exec(code, run_globals) File "memcg_slabinfo.py", line 226, in main() File "memcg_slabinfo.py", line 199, in main cache = page.slab_cache AttributeError: 'struct page' has no member 'slab_cache' The problem can be fixed by explicitly casting struct page * to struct slab * for slab pages. The tools works as expected with this fix, e.g.: cred_jar 776 776 192 21 1 : tunables 0 0 0 : slabdata 547 547 0 kmalloc-cg-32 6 6 32 128 1 : tunables 0 0 0 : slabdata 9 9 0 files_cache 3 3 832 39 8 : tunables 0 0 0 : slabdata 8 8 0 kmalloc-cg-512 1 1 512 32 4 : tunables 0 0 0 : slabdata 10 10 0 task_struct 10 10 6720 4 8 : tunables 0 0 0 : slabdata 63 63 0 mm_struct 3 3 1664 19 8 : tunables 0 0 0 : slabdata 9 9 0 kmalloc-cg-16 1 1 16 256 1 : tunables 0 0 0 : slabdata 8 8 0 pde_opener 1 1 40 102 1 : tunables 0 0 0 : slabdata 8 8 0 anon_vma_chain 375 375 64 64 1 : tunables 0 0 0 : slabdata 81 81 0 radix_tree_node 3 3 584 28 4 : tunables 0 0 0 : slabdata 419 419 0 dentry 98 98 312 26 2 : tunables 0 0 0 : slabdata 1420 1420 0 btrfs_inode 3 3 2368 13 8 : tunables 0 0 0 : slabdata 730 730 0 signal_cache 3 3 1600 20 8 : tunables 0 0 0 : slabdata 17 17 0 sighand_cache 3 3 2240 14 8 : tunables 0 0 0 : slabdata 20 20 0 filp 90 90 512 32 4 : tunables 0 0 0 : slabdata 95 95 0 anon_vma 214 214 200 20 1 : tunables 0 0 0 : slabdata 162 162 0 kmalloc-cg-1k 1 1 1024 32 8 : tunables 0 0 0 : slabdata 22 22 0 pid 10 10 256 32 2 : tunables 0 0 0 : slabdata 14 14 0 kmalloc-cg-64 2 2 64 64 1 : tunables 0 0 0 : slabdata 8 8 0 kmalloc-cg-96 3 3 96 42 1 : tunables 0 0 0 : slabdata 8 8 0 sock_inode_cache 5 5 1408 23 8 : tunables 0 0 0 : slabdata 29 29 0 UNIX 7 7 1920 17 8 : tunables 0 0 0 : slabdata 21 21 0 inode_cache 36 36 1152 28 8 : tunables 0 0 0 : slabdata 680 680 0 proc_inode_cache 26 26 1224 26 8 : tunables 0 0 0 : slabdata 64 64 0 kmalloc-cg-2k 2 2 2048 16 8 : tunables 0 0 0 : slabdata 9 9 0 v2: change naming and count_partial()/count_free()/for_each_slab() signatures to work with slabs, suggested by Matthew Wilcox Fixes: 07f910f9b729 ("mm: Remove slab from struct page") Reported-by: Vasily Averin Signed-off-by: Roman Gushchin Tested-by: Vasily Averin Signed-off-by: Vlastimil Babka Link: https://lore.kernel.org/linux-patches/Yg2cKKnIboNu7j+p@carbon.DHCP.thefacebook.com/ --- tools/cgroup/memcg_slabinfo.py | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/tools/cgroup/memcg_slabinfo.py b/tools/cgroup/memcg_slabinfo.py index 1600b17dbb8ab6..1d3a90d93fe267 100644 --- a/tools/cgroup/memcg_slabinfo.py +++ b/tools/cgroup/memcg_slabinfo.py @@ -11,7 +11,7 @@ from drgn.helpers.linux import for_each_page from drgn.helpers.linux.cpumask import for_each_online_cpu from drgn.helpers.linux.percpu import per_cpu_ptr -from drgn import container_of, FaultError, Object +from drgn import container_of, FaultError, Object, cast DESC = """ @@ -69,15 +69,15 @@ def oo_objects(s): def count_partial(n, fn): - nr_pages = 0 - for page in list_for_each_entry('struct page', n.partial.address_of_(), - 'lru'): - nr_pages += fn(page) - return nr_pages + nr_objs = 0 + for slab in list_for_each_entry('struct slab', n.partial.address_of_(), + 'slab_list'): + nr_objs += fn(slab) + return nr_objs -def count_free(page): - return page.objects - page.inuse +def count_free(slab): + return slab.objects - slab.inuse def slub_get_slabinfo(s, cfg): @@ -145,14 +145,14 @@ def detect_kernel_config(): return cfg -def for_each_slab_page(prog): +def for_each_slab(prog): PGSlab = 1 << prog.constant('PG_slab') PGHead = 1 << prog.constant('PG_head') for page in for_each_page(prog): try: if page.flags.value_() & PGSlab: - yield page + yield cast('struct slab *', page) except FaultError: pass @@ -190,13 +190,13 @@ def main(): 'list'): obj_cgroups.add(ptr.value_()) - # look over all slab pages, belonging to non-root memcgs - # and look for objects belonging to the given memory cgroup - for page in for_each_slab_page(prog): - objcg_vec_raw = page.memcg_data.value_() + # look over all slab folios and look for objects belonging + # to the given memory cgroup + for slab in for_each_slab(prog): + objcg_vec_raw = slab.memcg_data.value_() if objcg_vec_raw == 0: continue - cache = page.slab_cache + cache = slab.slab_cache if not cache: continue addr = cache.value_() From cc20cced0598d9a5ff91ae4ab147b3b5e99ee819 Mon Sep 17 00:00:00 2001 From: Tao Liu Date: Fri, 18 Feb 2022 22:35:24 +0800 Subject: [PATCH 351/493] gso: do not skip outer ip header in case of ipip and net_failover We encounter a tcp drop issue in our cloud environment. Packet GROed in host forwards to a VM virtio_net nic with net_failover enabled. VM acts as a IPVS LB with ipip encapsulation. The full path like: host gro -> vm virtio_net rx -> net_failover rx -> ipvs fullnat -> ipip encap -> net_failover tx -> virtio_net tx When net_failover transmits a ipip pkt (gso_type = 0x0103, which means SKB_GSO_TCPV4, SKB_GSO_DODGY and SKB_GSO_IPXIP4), there is no gso did because it supports TSO and GSO_IPXIP4. But network_header points to inner ip header. Call Trace: tcp4_gso_segment ------> return NULL inet_gso_segment ------> inner iph, network_header points to ipip_gso_segment inet_gso_segment ------> outer iph skb_mac_gso_segment Afterwards virtio_net transmits the pkt, only inner ip header is modified. And the outer one just keeps unchanged. The pkt will be dropped in remote host. Call Trace: inet_gso_segment ------> inner iph, outer iph is skipped skb_mac_gso_segment __skb_gso_segment validate_xmit_skb validate_xmit_skb_list sch_direct_xmit __qdisc_run __dev_queue_xmit ------> virtio_net dev_hard_start_xmit __dev_queue_xmit ------> net_failover ip_finish_output2 ip_output iptunnel_xmit ip_tunnel_xmit ipip_tunnel_xmit ------> ipip dev_hard_start_xmit __dev_queue_xmit ip_finish_output2 ip_output ip_forward ip_rcv __netif_receive_skb_one_core netif_receive_skb_internal napi_gro_receive receive_buf virtnet_poll net_rx_action The root cause of this issue is specific with the rare combination of SKB_GSO_DODGY and a tunnel device that adds an SKB_GSO_ tunnel option. SKB_GSO_DODGY is set from external virtio_net. We need to reset network header when callbacks.gso_segment() returns NULL. This patch also includes ipv6_gso_segment(), considering SIT, etc. Fixes: cb32f511a70b ("ipip: add GSO/TSO support") Signed-off-by: Tao Liu Reviewed-by: Willem de Bruijn Signed-off-by: David S. Miller --- net/ipv4/af_inet.c | 5 ++++- net/ipv6/ip6_offload.c | 2 ++ 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index 9c465bac1eb0e4..72fde2888ad2fc 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -1376,8 +1376,11 @@ struct sk_buff *inet_gso_segment(struct sk_buff *skb, } ops = rcu_dereference(inet_offloads[proto]); - if (likely(ops && ops->callbacks.gso_segment)) + if (likely(ops && ops->callbacks.gso_segment)) { segs = ops->callbacks.gso_segment(skb, features); + if (!segs) + skb->network_header = skb_mac_header(skb) + nhoff - skb->head; + } if (IS_ERR_OR_NULL(segs)) goto out; diff --git a/net/ipv6/ip6_offload.c b/net/ipv6/ip6_offload.c index b29e9ba5e1136a..5f577e21459b7e 100644 --- a/net/ipv6/ip6_offload.c +++ b/net/ipv6/ip6_offload.c @@ -114,6 +114,8 @@ static struct sk_buff *ipv6_gso_segment(struct sk_buff *skb, if (likely(ops && ops->callbacks.gso_segment)) { skb_reset_transport_header(skb); segs = ops->callbacks.gso_segment(skb, features); + if (!segs) + skb->network_header = skb_mac_header(skb) + nhoff - skb->head; } if (IS_ERR_OR_NULL(segs)) From 228339662b398a59b3560cd571deb8b25b253c7e Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 21 Feb 2022 05:49:30 -0700 Subject: [PATCH 352/493] io_uring: don't convert to jiffies for waiting on timeouts If an application calls io_uring_enter(2) with a timespec passed in, convert that timespec to ktime_t rather than jiffies. The latter does not provide the granularity the application may expect, and may in fact provided different granularity on different systems, depending on what the HZ value is configured at. Turn the timespec into an absolute ktime_t, and use that with schedule_hrtimeout() instead. Link: https://github.com/axboe/liburing/issues/531 Cc: stable@vger.kernel.org Reported-by: Bob Chen Signed-off-by: Jens Axboe --- fs/io_uring.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index b928928617a475..928446fe131989 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -7694,7 +7694,7 @@ static int io_run_task_work_sig(void) /* when returns >0, the caller should retry */ static inline int io_cqring_wait_schedule(struct io_ring_ctx *ctx, struct io_wait_queue *iowq, - signed long *timeout) + ktime_t timeout) { int ret; @@ -7706,8 +7706,9 @@ static inline int io_cqring_wait_schedule(struct io_ring_ctx *ctx, if (test_bit(0, &ctx->check_cq_overflow)) return 1; - *timeout = schedule_timeout(*timeout); - return !*timeout ? -ETIME : 1; + if (!schedule_hrtimeout(&timeout, HRTIMER_MODE_ABS)) + return -ETIME; + return 1; } /* @@ -7720,7 +7721,7 @@ static int io_cqring_wait(struct io_ring_ctx *ctx, int min_events, { struct io_wait_queue iowq; struct io_rings *rings = ctx->rings; - signed long timeout = MAX_SCHEDULE_TIMEOUT; + ktime_t timeout = KTIME_MAX; int ret; do { @@ -7736,7 +7737,7 @@ static int io_cqring_wait(struct io_ring_ctx *ctx, int min_events, if (get_timespec64(&ts, uts)) return -EFAULT; - timeout = timespec64_to_jiffies(&ts); + timeout = ktime_add_ns(timespec64_to_ktime(ts), ktime_get_ns()); } if (sig) { @@ -7768,7 +7769,7 @@ static int io_cqring_wait(struct io_ring_ctx *ctx, int min_events, } prepare_to_wait_exclusive(&ctx->cq_wait, &iowq.wq, TASK_INTERRUPTIBLE); - ret = io_cqring_wait_schedule(ctx, &iowq, &timeout); + ret = io_cqring_wait_schedule(ctx, &iowq, timeout); finish_wait(&ctx->cq_wait, &iowq.wq); cond_resched(); } while (ret > 0); From b6ad6261d27708567b309fdb3102b12c42a070cc Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Mon, 21 Feb 2022 13:45:57 +0200 Subject: [PATCH 353/493] net: mdio-ipq4019: add delay after clock enable Experimentation shows that PHY detect might fail when the code attempts MDIO bus read immediately after clock enable. Add delay to stabilize the clock before bus access. PHY detect failure started to show after commit 7590fc6f80ac ("net: mdio: Demote probed message to debug print") that removed coincidental delay between clock enable and bus access. 10ms is meant to match the time it take to send the probed message over UART at 115200 bps. This might be a far overshoot. Fixes: 23a890d493e3 ("net: mdio: Add the reset function for IPQ MDIO driver") Signed-off-by: Baruch Siach Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/mdio/mdio-ipq4019.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/mdio/mdio-ipq4019.c b/drivers/net/mdio/mdio-ipq4019.c index 5f4cd24a0241d3..4eba5a91075c07 100644 --- a/drivers/net/mdio/mdio-ipq4019.c +++ b/drivers/net/mdio/mdio-ipq4019.c @@ -200,7 +200,11 @@ static int ipq_mdio_reset(struct mii_bus *bus) if (ret) return ret; - return clk_prepare_enable(priv->mdio_clk); + ret = clk_prepare_enable(priv->mdio_clk); + if (ret == 0) + mdelay(10); + + return ret; } static int ipq4019_mdio_probe(struct platform_device *pdev) From ae09639e3b2a0291b37b122c94dd4f773cd4e513 Mon Sep 17 00:00:00 2001 From: Daniel Scally Date: Wed, 16 Feb 2022 22:53:02 +0000 Subject: [PATCH 354/493] platform/x86: int3472: Add terminator to gpiod_lookup_table Without the terminator, if a con_id is passed to gpio_find() that does not exist in the lookup table the function will not stop looping correctly, and eventually cause an oops. Fixes: 19d8d6e36b4b ("platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell") Signed-off-by: Daniel Scally Link: https://lore.kernel.org/r/20220216225304.53911-5-djrscally@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede --- drivers/platform/x86/intel/int3472/tps68470_board_data.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/intel/int3472/tps68470_board_data.c b/drivers/platform/x86/intel/int3472/tps68470_board_data.c index f93d437fd19281..525f09a3b5ff74 100644 --- a/drivers/platform/x86/intel/int3472/tps68470_board_data.c +++ b/drivers/platform/x86/intel/int3472/tps68470_board_data.c @@ -100,7 +100,8 @@ static struct gpiod_lookup_table surface_go_tps68470_gpios = { .dev_id = "i2c-INT347A:00", .table = { GPIO_LOOKUP("tps68470-gpio", 9, "reset", GPIO_ACTIVE_LOW), - GPIO_LOOKUP("tps68470-gpio", 7, "powerdown", GPIO_ACTIVE_LOW) + GPIO_LOOKUP("tps68470-gpio", 7, "powerdown", GPIO_ACTIVE_LOW), + { } } }; From 6069da443bf65f513bb507bb21e2f87cfb1ad0b6 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Fri, 18 Feb 2022 12:45:32 +0100 Subject: [PATCH 355/493] netfilter: nf_tables: unregister flowtable hooks on netns exit Unregister flowtable hooks before they are releases via nf_tables_flowtable_destroy() otherwise hook core reports UAF. BUG: KASAN: use-after-free in nf_hook_entries_grow+0x5a7/0x700 net/netfilter/core.c:142 net/netfilter/core.c:142 Read of size 4 at addr ffff8880736f7438 by task syz-executor579/3666 CPU: 0 PID: 3666 Comm: syz-executor579 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] __dump_stack lib/dump_stack.c:88 [inline] lib/dump_stack.c:106 dump_stack_lvl+0x1dc/0x2d8 lib/dump_stack.c:106 lib/dump_stack.c:106 print_address_description+0x65/0x380 mm/kasan/report.c:247 mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] __kasan_report mm/kasan/report.c:433 [inline] mm/kasan/report.c:450 kasan_report+0x19a/0x1f0 mm/kasan/report.c:450 mm/kasan/report.c:450 nf_hook_entries_grow+0x5a7/0x700 net/netfilter/core.c:142 net/netfilter/core.c:142 __nf_register_net_hook+0x27e/0x8d0 net/netfilter/core.c:429 net/netfilter/core.c:429 nf_register_net_hook+0xaa/0x180 net/netfilter/core.c:571 net/netfilter/core.c:571 nft_register_flowtable_net_hooks+0x3c5/0x730 net/netfilter/nf_tables_api.c:7232 net/netfilter/nf_tables_api.c:7232 nf_tables_newflowtable+0x2022/0x2cf0 net/netfilter/nf_tables_api.c:7430 net/netfilter/nf_tables_api.c:7430 nfnetlink_rcv_batch net/netfilter/nfnetlink.c:513 [inline] nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:634 [inline] nfnetlink_rcv_batch net/netfilter/nfnetlink.c:513 [inline] net/netfilter/nfnetlink.c:652 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:634 [inline] net/netfilter/nfnetlink.c:652 nfnetlink_rcv+0x10e6/0x2550 net/netfilter/nfnetlink.c:652 net/netfilter/nfnetlink.c:652 __nft_release_hook() calls nft_unregister_flowtable_net_hooks() which only unregisters the hooks, then after RCU grace period, it is guaranteed that no packets add new entries to the flowtable (no flow offload rules and flowtable hooks are reachable from packet path), so it is safe to call nf_flow_table_free() which cleans up the remaining entries from the flowtable (both software and hardware) and it unbinds the flow_block. Fixes: ff4bf2f42a40 ("netfilter: nf_tables: add nft_unregister_flowtable_hook()") Reported-by: syzbot+e918523f77e62790d6d9@syzkaller.appspotmail.com Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_tables_api.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 5fa16990da9517..3081c4399f10f2 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -9636,10 +9636,13 @@ EXPORT_SYMBOL_GPL(__nft_release_basechain); static void __nft_release_hook(struct net *net, struct nft_table *table) { + struct nft_flowtable *flowtable; struct nft_chain *chain; list_for_each_entry(chain, &table->chains, list) nf_tables_unregister_hook(net, table, chain); + list_for_each_entry(flowtable, &table->flowtables, list) + nft_unregister_flowtable_net_hooks(net, &flowtable->hook_list); } static void __nft_release_hooks(struct net *net) From 1a58f84ea5df7f026bf92a0009f931bf547fe965 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 18 Feb 2022 13:17:05 +0100 Subject: [PATCH 356/493] netfilter: nft_limit: fix stateful object memory leak We need to provide a destroy callback to release the extra fields. Fixes: 3b9e2ea6c11b ("netfilter: nft_limit: move stateful fields out of expression data") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nft_limit.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/net/netfilter/nft_limit.c b/net/netfilter/nft_limit.c index c4f308460dd1d4..a726b623963de4 100644 --- a/net/netfilter/nft_limit.c +++ b/net/netfilter/nft_limit.c @@ -340,11 +340,20 @@ static int nft_limit_obj_pkts_dump(struct sk_buff *skb, return nft_limit_dump(skb, &priv->limit, NFT_LIMIT_PKTS); } +static void nft_limit_obj_pkts_destroy(const struct nft_ctx *ctx, + struct nft_object *obj) +{ + struct nft_limit_priv_pkts *priv = nft_obj_data(obj); + + nft_limit_destroy(ctx, &priv->limit); +} + static struct nft_object_type nft_limit_obj_type; static const struct nft_object_ops nft_limit_obj_pkts_ops = { .type = &nft_limit_obj_type, .size = NFT_EXPR_SIZE(sizeof(struct nft_limit_priv_pkts)), .init = nft_limit_obj_pkts_init, + .destroy = nft_limit_obj_pkts_destroy, .eval = nft_limit_obj_pkts_eval, .dump = nft_limit_obj_pkts_dump, }; @@ -378,11 +387,20 @@ static int nft_limit_obj_bytes_dump(struct sk_buff *skb, return nft_limit_dump(skb, priv, NFT_LIMIT_PKT_BYTES); } +static void nft_limit_obj_bytes_destroy(const struct nft_ctx *ctx, + struct nft_object *obj) +{ + struct nft_limit_priv *priv = nft_obj_data(obj); + + nft_limit_destroy(ctx, priv); +} + static struct nft_object_type nft_limit_obj_type; static const struct nft_object_ops nft_limit_obj_bytes_ops = { .type = &nft_limit_obj_type, .size = sizeof(struct nft_limit_priv), .init = nft_limit_obj_bytes_init, + .destroy = nft_limit_obj_bytes_destroy, .eval = nft_limit_obj_bytes_eval, .dump = nft_limit_obj_bytes_dump, }; From 9d2231c5d74e13b2a0546fee6737ee4446017903 Mon Sep 17 00:00:00 2001 From: Max Kellermann Date: Mon, 21 Feb 2022 11:03:13 +0100 Subject: [PATCH 357/493] lib/iov_iter: initialize "flags" in new pipe_buffer The functions copy_page_to_iter_pipe() and push_pipe() can both allocate a new pipe_buffer, but the "flags" member initializer is missing. Fixes: 241699cd72a8 ("new iov_iter flavour: pipe-backed") To: Alexander Viro To: linux-fsdevel@vger.kernel.org To: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Max Kellermann Signed-off-by: Al Viro --- lib/iov_iter.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/lib/iov_iter.c b/lib/iov_iter.c index b0e0acdf96c15e..6dd5330f7a9957 100644 --- a/lib/iov_iter.c +++ b/lib/iov_iter.c @@ -414,6 +414,7 @@ static size_t copy_page_to_iter_pipe(struct page *page, size_t offset, size_t by return 0; buf->ops = &page_cache_pipe_buf_ops; + buf->flags = 0; get_page(page); buf->page = page; buf->offset = offset; @@ -577,6 +578,7 @@ static size_t push_pipe(struct iov_iter *i, size_t size, break; buf->ops = &default_pipe_buf_ops; + buf->flags = 0; buf->page = page; buf->offset = 0; buf->len = min_t(ssize_t, left, PAGE_SIZE); From f6c052afe6f802d87c74153b7a57c43b2e9faf07 Mon Sep 17 00:00:00 2001 From: Christophe Kerello Date: Sun, 20 Feb 2022 15:14:31 +0000 Subject: [PATCH 358/493] nvmem: core: Fix a conflict between MTD and NVMEM on wp-gpios property Wp-gpios property can be used on NVMEM nodes and the same property can be also used on MTD NAND nodes. In case of the wp-gpios property is defined at NAND level node, the GPIO management is done at NAND driver level. Write protect is disabled when the driver is probed or resumed and is enabled when the driver is released or suspended. When no partitions are defined in the NAND DT node, then the NAND DT node will be passed to NVMEM framework. If wp-gpios property is defined in this node, the GPIO resource is taken twice and the NAND controller driver fails to probe. It would be possible to set config->wp_gpio at MTD level before calling nvmem_register function but NVMEM framework will toggle this GPIO on each write when this GPIO should only be controlled at NAND level driver to ensure that the Write Protect has not been enabled. A way to fix this conflict is to add a new boolean flag in nvmem_config named ignore_wp. In case ignore_wp is set, the GPIO resource will be managed by the provider. Fixes: 2a127da461a9 ("nvmem: add support for the write-protect pin") Cc: stable@vger.kernel.org Signed-off-by: Christophe Kerello Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20220220151432.16605-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/nvmem/core.c | 2 +- include/linux/nvmem-provider.h | 4 +++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c index 23a38dcf0fc4dc..9fd1602b539d97 100644 --- a/drivers/nvmem/core.c +++ b/drivers/nvmem/core.c @@ -771,7 +771,7 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config) if (config->wp_gpio) nvmem->wp_gpio = config->wp_gpio; - else + else if (!config->ignore_wp) nvmem->wp_gpio = gpiod_get_optional(config->dev, "wp", GPIOD_OUT_HIGH); if (IS_ERR(nvmem->wp_gpio)) { diff --git a/include/linux/nvmem-provider.h b/include/linux/nvmem-provider.h index 98efb7b5660d9b..c9a3ac9efeaa9a 100644 --- a/include/linux/nvmem-provider.h +++ b/include/linux/nvmem-provider.h @@ -70,7 +70,8 @@ struct nvmem_keepout { * @word_size: Minimum read/write access granularity. * @stride: Minimum read/write access stride. * @priv: User context passed to read/write callbacks. - * @wp-gpio: Write protect pin + * @wp-gpio: Write protect pin + * @ignore_wp: Write Protect pin is managed by the provider. * * Note: A default "nvmem" name will be assigned to the device if * no name is specified in its configuration. In such case "" is @@ -92,6 +93,7 @@ struct nvmem_config { enum nvmem_type type; bool read_only; bool root_only; + bool ignore_wp; struct device_node *of_node; bool no_of_node; nvmem_reg_read_t reg_read; From 6c7621890995d089a56a06d11580d185ede7c2f8 Mon Sep 17 00:00:00 2001 From: Christophe Kerello Date: Sun, 20 Feb 2022 15:14:32 +0000 Subject: [PATCH 359/493] mtd: core: Fix a conflict between MTD and NVMEM on wp-gpios property Wp-gpios property can be used on NVMEM nodes and the same property can be also used on MTD NAND nodes. In case of the wp-gpios property is defined at NAND level node, the GPIO management is done at NAND driver level. Write protect is disabled when the driver is probed or resumed and is enabled when the driver is released or suspended. When no partitions are defined in the NAND DT node, then the NAND DT node will be passed to NVMEM framework. If wp-gpios property is defined in this node, the GPIO resource is taken twice and the NAND controller driver fails to probe. A new Boolean flag named ignore_wp has been added in nvmem_config. In case ignore_wp is set, it means that the GPIO is handled by the provider. Lets set this flag in MTD layer to avoid the conflict on wp_gpios property. Fixes: 2a127da461a9 ("nvmem: add support for the write-protect pin") Cc: stable@vger.kernel.org Acked-by: Miquel Raynal Signed-off-by: Christophe Kerello Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20220220151432.16605-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/mtd/mtdcore.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 70f492dce15892..eef87b28d6c843 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -546,6 +546,7 @@ static int mtd_nvmem_add(struct mtd_info *mtd) config.stride = 1; config.read_only = true; config.root_only = true; + config.ignore_wp = true; config.no_of_node = !of_device_is_compatible(node, "nvmem-cells"); config.priv = mtd; @@ -833,6 +834,7 @@ static struct nvmem_device *mtd_otp_nvmem_register(struct mtd_info *mtd, config.owner = THIS_MODULE; config.type = NVMEM_TYPE_OTP; config.root_only = true; + config.ignore_wp = true; config.reg_read = reg_read; config.size = size; config.of_node = np; From 737b0ef3be6b319d6c1fd64193d1603311969326 Mon Sep 17 00:00:00 2001 From: "daniel.starke@siemens.com" Date: Thu, 17 Feb 2022 23:31:17 -0800 Subject: [PATCH 360/493] tty: n_gsm: fix encoding of control signal octet bit DV n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.4.6.3.7 describes the encoding of the control signal octet used by the MSC (modem status command). The same encoding is also used in convergence layer type 2 as described in chapter 5.5.2. Table 7 and 24 both require the DV (data valid) bit to be set 1 for outgoing control signal octets sent by the DTE (data terminal equipment), i.e. for the initiator side. Currently, the DV bit is only set if CD (carrier detect) is on, regardless of the side. This patch fixes this behavior by setting the DV bit on the initiator side unconditionally. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke Link: https://lore.kernel.org/r/20220218073123.2121-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_gsm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 0b1808e3a912bf..e199315a158e70 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -439,7 +439,7 @@ static u8 gsm_encode_modem(const struct gsm_dlci *dlci) modembits |= MDM_RTR; if (dlci->modem_tx & TIOCM_RI) modembits |= MDM_IC; - if (dlci->modem_tx & TIOCM_CD) + if (dlci->modem_tx & TIOCM_CD || dlci->gsm->initiator) modembits |= MDM_DV; return modembits; } From 57435c42400ec147a527b2313188b649e81e449e Mon Sep 17 00:00:00 2001 From: "daniel.starke@siemens.com" Date: Thu, 17 Feb 2022 23:31:18 -0800 Subject: [PATCH 361/493] tty: n_gsm: fix encoding of command/response bit n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.2.1.2 describes the encoding of the C/R (command/response) bit. Table 1 shows that the actual encoding of the C/R bit is inverted if the associated frame is sent by the responder. The referenced commit fixed here further broke the internal meaning of this bit in the outgoing path by always setting the C/R bit regardless of the frame type. This patch fixes both by setting the C/R bit always consistently for command (1) and response (0) frames and inverting it later for the responder where necessary. The meaning of this bit in the debug output is being preserved and shows the bit as if it was encoded by the initiator. This reflects only the frame type rather than the encoded combination of communication side and frame type. Fixes: cc0f42122a7e ("tty: n_gsm: Modify CR,PF bit when config requester") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke Link: https://lore.kernel.org/r/20220218073123.2121-2-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_gsm.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index e199315a158e70..db41b9e5d35e05 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -448,7 +448,7 @@ static u8 gsm_encode_modem(const struct gsm_dlci *dlci) * gsm_print_packet - display a frame for debug * @hdr: header to print before decode * @addr: address EA from the frame - * @cr: C/R bit from the frame + * @cr: C/R bit seen as initiator * @control: control including PF bit * @data: following data bytes * @dlen: length of data @@ -548,7 +548,7 @@ static int gsm_stuff_frame(const u8 *input, u8 *output, int len) * gsm_send - send a control frame * @gsm: our GSM mux * @addr: address for control frame - * @cr: command/response bit + * @cr: command/response bit seen as initiator * @control: control byte including PF bit * * Format up and transmit a control frame. These do not go via the @@ -563,11 +563,15 @@ static void gsm_send(struct gsm_mux *gsm, int addr, int cr, int control) int len; u8 cbuf[10]; u8 ibuf[3]; + int ocr; + + /* toggle C/R coding if not initiator */ + ocr = cr ^ (gsm->initiator ? 0 : 1); switch (gsm->encoding) { case 0: cbuf[0] = GSM0_SOF; - cbuf[1] = (addr << 2) | (cr << 1) | EA; + cbuf[1] = (addr << 2) | (ocr << 1) | EA; cbuf[2] = control; cbuf[3] = EA; /* Length of data = 0 */ cbuf[4] = 0xFF - gsm_fcs_add_block(INIT_FCS, cbuf + 1, 3); @@ -577,7 +581,7 @@ static void gsm_send(struct gsm_mux *gsm, int addr, int cr, int control) case 1: case 2: /* Control frame + packing (but not frame stuffing) in mode 1 */ - ibuf[0] = (addr << 2) | (cr << 1) | EA; + ibuf[0] = (addr << 2) | (ocr << 1) | EA; ibuf[1] = control; ibuf[2] = 0xFF - gsm_fcs_add_block(INIT_FCS, ibuf, 2); /* Stuffing may double the size worst case */ @@ -611,7 +615,7 @@ static void gsm_send(struct gsm_mux *gsm, int addr, int cr, int control) static inline void gsm_response(struct gsm_mux *gsm, int addr, int control) { - gsm_send(gsm, addr, 1, control); + gsm_send(gsm, addr, 0, control); } /** @@ -1800,10 +1804,10 @@ static void gsm_queue(struct gsm_mux *gsm) goto invalid; cr = gsm->address & 1; /* C/R bit */ + cr ^= gsm->initiator ? 0 : 1; /* Flip so 1 always means command */ gsm_print_packet("<--", address, cr, gsm->control, gsm->buf, gsm->len); - cr ^= 1 - gsm->initiator; /* Flip so 1 always means command */ dlci = gsm->dlci[address]; switch (gsm->control) { From e3b7468f082d106459e86e8dc6fb9bdd65553433 Mon Sep 17 00:00:00 2001 From: "daniel.starke@siemens.com" Date: Thu, 17 Feb 2022 23:31:19 -0800 Subject: [PATCH 362/493] tty: n_gsm: fix proper link termination after failed open Trying to open a DLCI by sending a SABM frame may fail with a timeout. The link is closed on the initiator side without informing the responder about this event. The responder assumes the link is open after sending a UA frame to answer the SABM frame. The link gets stuck in a half open state. This patch fixes this by initiating the proper link termination procedure after link setup timeout instead of silently closing it down. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke Link: https://lore.kernel.org/r/20220218073123.2121-3-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_gsm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index db41b9e5d35e05..53fa1cec49bd4f 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -1518,7 +1518,7 @@ static void gsm_dlci_t1(struct timer_list *t) dlci->mode = DLCI_MODE_ADM; gsm_dlci_open(dlci); } else { - gsm_dlci_close(dlci); + gsm_dlci_begin_close(dlci); /* prevent half open link */ } break; From 96b169f05cdcc844b400695184d77e42071d14f2 Mon Sep 17 00:00:00 2001 From: "daniel.starke@siemens.com" Date: Thu, 17 Feb 2022 23:31:20 -0800 Subject: [PATCH 363/493] tty: n_gsm: fix NULL pointer access due to DLCI release The here fixed commit made the tty hangup asynchronous to avoid a circular locking warning. I could not reproduce this warning. Furthermore, due to the asynchronous hangup the function call now gets queued up while the underlying tty is being freed. Depending on the timing this results in a NULL pointer access in the global work queue scheduler. To be precise in process_one_work(). Therefore, the previous commit made the issue worse which it tried to fix. This patch fixes this by falling back to the old behavior which uses a blocking tty hangup call before freeing up the associated tty. Fixes: 7030082a7415 ("tty: n_gsm: avoid recursive locking with async port hangup") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke Link: https://lore.kernel.org/r/20220218073123.2121-4-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_gsm.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 53fa1cec49bd4f..79397a40a8f85d 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -1752,7 +1752,12 @@ static void gsm_dlci_release(struct gsm_dlci *dlci) gsm_destroy_network(dlci); mutex_unlock(&dlci->mutex); - tty_hangup(tty); + /* We cannot use tty_hangup() because in tty_kref_put() the tty + * driver assumes that the hangup queue is free and reuses it to + * queue release_one_tty() -> NULL pointer panic in + * process_one_work(). + */ + tty_vhangup(tty); tty_port_tty_set(&dlci->port, NULL); tty_kref_put(tty); From c19d93542a6081577e6da9bf5e887979c72e80c1 Mon Sep 17 00:00:00 2001 From: "daniel.starke@siemens.com" Date: Thu, 17 Feb 2022 23:31:21 -0800 Subject: [PATCH 364/493] tty: n_gsm: fix wrong tty control line for flow control tty flow control is handled via gsmtty_throttle() and gsmtty_unthrottle(). Both functions propagate the outgoing hardware flow control state to the remote side via MSC (modem status command) frames. The local state is taken from the RTS (ready to send) flag of the tty. However, RTS gets mapped to DTR (data terminal ready), which is wrong. This patch corrects this by mapping RTS to RTS. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke Link: https://lore.kernel.org/r/20220218073123.2121-5-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_gsm.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 79397a40a8f85d..b4ddac0124b990 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -3243,9 +3243,9 @@ static void gsmtty_throttle(struct tty_struct *tty) if (dlci->state == DLCI_CLOSED) return; if (C_CRTSCTS(tty)) - dlci->modem_tx &= ~TIOCM_DTR; + dlci->modem_tx &= ~TIOCM_RTS; dlci->throttled = true; - /* Send an MSC with DTR cleared */ + /* Send an MSC with RTS cleared */ gsmtty_modem_update(dlci, 0); } @@ -3255,9 +3255,9 @@ static void gsmtty_unthrottle(struct tty_struct *tty) if (dlci->state == DLCI_CLOSED) return; if (C_CRTSCTS(tty)) - dlci->modem_tx |= TIOCM_DTR; + dlci->modem_tx |= TIOCM_RTS; dlci->throttled = false; - /* Send an MSC with DTR set */ + /* Send an MSC with RTS set */ gsmtty_modem_update(dlci, 0); } From 687f9ad43c52501f46164758e908a5dd181a87fc Mon Sep 17 00:00:00 2001 From: "daniel.starke@siemens.com" Date: Thu, 17 Feb 2022 23:31:22 -0800 Subject: [PATCH 365/493] tty: n_gsm: fix wrong modem processing in convergence layer type 2 The function gsm_process_modem() exists to handle modem status bits of incoming frames. This includes incoming MSC (modem status command) frames and convergence layer type 2 data frames. The function, however, was only designed to handle MSC frames as it expects the command length. Within gsm_dlci_data() it is wrongly assumed that this is the same as the data frame length. This is only true if the data frame contains only 1 byte of payload. This patch names the length parameter of gsm_process_modem() in a generic manner to reflect its association. It also corrects all calls to the function to handle the variable number of modem status octets correctly in both cases. Fixes: 7263287af93d ("tty: n_gsm: Fixed logic to decode break signal from modem status") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke Link: https://lore.kernel.org/r/20220218073123.2121-6-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_gsm.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index b4ddac0124b990..8ff5c0c612339f 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -1021,25 +1021,25 @@ static void gsm_control_reply(struct gsm_mux *gsm, int cmd, const u8 *data, * @tty: virtual tty bound to the DLCI * @dlci: DLCI to affect * @modem: modem bits (full EA) - * @clen: command length + * @slen: number of signal octets * * Used when a modem control message or line state inline in adaption * layer 2 is processed. Sort out the local modem state and throttles */ static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci, - u32 modem, int clen) + u32 modem, int slen) { int mlines = 0; u8 brk = 0; int fc; - /* The modem status command can either contain one octet (v.24 signals) - or two octets (v.24 signals + break signals). The length field will - either be 2 or 3 respectively. This is specified in section - 5.4.6.3.7 of the 27.010 mux spec. */ + /* The modem status command can either contain one octet (V.24 signals) + * or two octets (V.24 signals + break signals). This is specified in + * section 5.4.6.3.7 of the 07.10 mux spec. + */ - if (clen == 2) + if (slen == 1) modem = modem & 0x7f; else { brk = modem & 0x7f; @@ -1096,6 +1096,7 @@ static void gsm_control_modem(struct gsm_mux *gsm, const u8 *data, int clen) unsigned int brk = 0; struct gsm_dlci *dlci; int len = clen; + int slen; const u8 *dp = data; struct tty_struct *tty; @@ -1115,6 +1116,7 @@ static void gsm_control_modem(struct gsm_mux *gsm, const u8 *data, int clen) return; dlci = gsm->dlci[addr]; + slen = len; while (gsm_read_ea(&modem, *dp++) == 0) { len--; if (len == 0) @@ -1131,7 +1133,7 @@ static void gsm_control_modem(struct gsm_mux *gsm, const u8 *data, int clen) modem |= (brk & 0x7f); } tty = tty_port_tty_get(&dlci->port); - gsm_process_modem(tty, dlci, modem, clen); + gsm_process_modem(tty, dlci, modem, slen); if (tty) { tty_wakeup(tty); tty_kref_put(tty); @@ -1597,6 +1599,7 @@ static void gsm_dlci_data(struct gsm_dlci *dlci, const u8 *data, int clen) struct tty_struct *tty; unsigned int modem = 0; int len = clen; + int slen = 0; if (debug & 16) pr_debug("%d bytes for tty\n", len); @@ -1609,12 +1612,14 @@ static void gsm_dlci_data(struct gsm_dlci *dlci, const u8 *data, int clen) case 2: /* Asynchronous serial with line state in each frame */ while (gsm_read_ea(&modem, *data++) == 0) { len--; + slen++; if (len == 0) return; } + slen++; tty = tty_port_tty_get(port); if (tty) { - gsm_process_modem(tty, dlci, modem, clen); + gsm_process_modem(tty, dlci, modem, slen); tty_kref_put(tty); } fallthrough; From a2ab75b8e76e455af7867e3835fd9cdf386b508f Mon Sep 17 00:00:00 2001 From: "daniel.starke@siemens.com" Date: Thu, 17 Feb 2022 23:31:23 -0800 Subject: [PATCH 366/493] tty: n_gsm: fix deadlock in gsmtty_open() In the current implementation the user may open a virtual tty which then could fail to establish the underlying DLCI. The function gsmtty_open() gets stuck in tty_port_block_til_ready() while waiting for a carrier rise. This happens if the remote side fails to acknowledge the link establishment request in time or completely. At some point gsm_dlci_close() is called to abort the link establishment attempt. The function tries to inform the associated virtual tty by performing a hangup. But the blocking loop within tty_port_block_til_ready() is not informed about this event. The patch proposed here fixes this by resetting the initialization state of the virtual tty to ensure the loop exits and triggering it to make tty_port_block_til_ready() return. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke Link: https://lore.kernel.org/r/20220218073123.2121-7-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_gsm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 8ff5c0c612339f..fa92f727fdf895 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -1457,6 +1457,9 @@ static void gsm_dlci_close(struct gsm_dlci *dlci) if (dlci->addr != 0) { tty_port_tty_hangup(&dlci->port, false); kfifo_reset(&dlci->fifo); + /* Ensure that gsmtty_open() can return. */ + tty_port_set_initialized(&dlci->port, 0); + wake_up_interruptible(&dlci->port.open_wait); } else dlci->gsm->dead = true; /* Unregister gsmtty driver,report gsmtty dev remove uevent for user */ From eebb0f4e894f1e9577a56b337693d1051dd6ebfd Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Wed, 16 Feb 2022 16:08:02 +0000 Subject: [PATCH 367/493] sc16is7xx: Fix for incorrect data being transmitted UART drivers are meant to use the port spinlock within certain methods, to protect against reentrancy. The sc16is7xx driver does very little locking, presumably because when added it triggers "scheduling while atomic" errors. This is due to the use of mutexes within the regmap abstraction layer, and the mutex implementation's habit of sleeping the current thread while waiting for access. Unfortunately this lack of interlocking can lead to corruption of outbound data, which occurs when the buffer used for I2C transmission is used simultaneously by two threads - a work queue thread running sc16is7xx_tx_proc, and an IRQ thread in sc16is7xx_port_irq, both of which can call sc16is7xx_handle_tx. An earlier patch added efr_lock, a mutex that controls access to the EFR register. This mutex is already claimed in the IRQ handler, and all that is required is to claim the same mutex in sc16is7xx_tx_proc. See: https://github.com/raspberrypi/linux/issues/4885 Fixes: 6393ff1c4435 ("sc16is7xx: Use threaded IRQ") Cc: stable Signed-off-by: Phil Elwell Link: https://lore.kernel.org/r/20220216160802.1026013-1-phil@raspberrypi.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sc16is7xx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 64e7e6c8145f8a..38d1c0748533cd 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -734,12 +734,15 @@ static irqreturn_t sc16is7xx_irq(int irq, void *dev_id) static void sc16is7xx_tx_proc(struct kthread_work *ws) { struct uart_port *port = &(to_sc16is7xx_one(ws, tx_work)->port); + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); if ((port->rs485.flags & SER_RS485_ENABLED) && (port->rs485.delay_rts_before_send > 0)) msleep(port->rs485.delay_rts_before_send); + mutex_lock(&s->efr_lock); sc16is7xx_handle_tx(port); + mutex_unlock(&s->efr_lock); } static void sc16is7xx_reconf_rs485(struct uart_port *port) From 1432108d00e42ffa383240bcac8d58f89ae19104 Mon Sep 17 00:00:00 2001 From: Bas Nieuwenhuizen Date: Sat, 12 Feb 2022 16:40:00 +0100 Subject: [PATCH 368/493] drm/amd/display: Protect update_bw_bounding_box FPU code. For DCN3/3.01/3.02 at least these use the fpu. v2: squash in build fix for when DCN is not enabled (Leo) Signed-off-by: Bas Nieuwenhuizen Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- .../gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c | 2 ++ drivers/gpu/drm/amd/display/dc/core/dc.c | 7 +++++-- 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c index f977f29907df58..10c7be40dfb0cd 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c @@ -473,8 +473,10 @@ static void dcn3_get_memclk_states_from_smu(struct clk_mgr *clk_mgr_base) clk_mgr_base->bw_params->dc_mode_softmax_memclk = dcn30_smu_get_dc_mode_max_dpm_freq(clk_mgr, PPCLK_UCLK); /* Refresh bounding box */ + DC_FP_START(); clk_mgr_base->ctx->dc->res_pool->funcs->update_bw_bounding_box( clk_mgr->base.ctx->dc, clk_mgr_base->bw_params); + DC_FP_END(); } static bool dcn3_is_smu_present(struct clk_mgr *clk_mgr_base) diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c index d18e9f3ea99832..ba1aa994db4b79 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc.c @@ -985,10 +985,13 @@ static bool dc_construct(struct dc *dc, goto fail; #ifdef CONFIG_DRM_AMD_DC_DCN dc->clk_mgr->force_smu_not_present = init_params->force_smu_not_present; -#endif - if (dc->res_pool->funcs->update_bw_bounding_box) + if (dc->res_pool->funcs->update_bw_bounding_box) { + DC_FP_START(); dc->res_pool->funcs->update_bw_bounding_box(dc, dc->clk_mgr->bw_params); + DC_FP_END(); + } +#endif /* Creation of current_state must occur after dc->dml * is initialized in dc_create_resource_pool because From f626dd0ff05043e5a7154770cc7cda66acee33a3 Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Thu, 20 Jan 2022 16:15:52 +0800 Subject: [PATCH 369/493] drm/amdgpu: disable MMHUB PG for Picasso MMHUB PG needs to be disabled for Picasso for stability reasons. Signed-off-by: Evan Quan Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/soc15.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/soc15.c b/drivers/gpu/drm/amd/amdgpu/soc15.c index 0fc1747e4a70f3..d0e37f7f196c3f 100644 --- a/drivers/gpu/drm/amd/amdgpu/soc15.c +++ b/drivers/gpu/drm/amd/amdgpu/soc15.c @@ -1114,8 +1114,11 @@ static int soc15_common_early_init(void *handle) AMD_CG_SUPPORT_SDMA_LS | AMD_CG_SUPPORT_VCN_MGCG; + /* + * MMHUB PG needs to be disabled for Picasso for + * stability reasons. + */ adev->pg_flags = AMD_PG_SUPPORT_SDMA | - AMD_PG_SUPPORT_MMHUB | AMD_PG_SUPPORT_VCN; } else { adev->cg_flags = AMD_CG_SUPPORT_GFX_MGCG | From e3f3824874da78db5775a5cb9c0970cd1c6978bc Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Thu, 20 Jan 2022 19:16:19 +0800 Subject: [PATCH 370/493] drm/amd/pm: fix some OEM SKU specific stability issues Add a quirk in sienna_cichlid_ppt.c to fix some OEM SKU specific stability issues. Signed-off-by: Evan Quan Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- .../amd/pm/swsmu/smu11/sienna_cichlid_ppt.c | 32 ++++++++++++++++++- 1 file changed, 31 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c index 2320bd7508767c..5488a0edb942d0 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c @@ -421,6 +421,36 @@ static int sienna_cichlid_store_powerplay_table(struct smu_context *smu) return 0; } +static int sienna_cichlid_patch_pptable_quirk(struct smu_context *smu) +{ + struct amdgpu_device *adev = smu->adev; + uint32_t *board_reserved; + uint16_t *freq_table_gfx; + uint32_t i; + + /* Fix some OEM SKU specific stability issues */ + GET_PPTABLE_MEMBER(BoardReserved, &board_reserved); + if ((adev->pdev->device == 0x73DF) && + (adev->pdev->revision == 0XC3) && + (adev->pdev->subsystem_device == 0x16C2) && + (adev->pdev->subsystem_vendor == 0x1043)) + board_reserved[0] = 1387; + + GET_PPTABLE_MEMBER(FreqTableGfx, &freq_table_gfx); + if ((adev->pdev->device == 0x73DF) && + (adev->pdev->revision == 0XC3) && + ((adev->pdev->subsystem_device == 0x16C2) || + (adev->pdev->subsystem_device == 0x133C)) && + (adev->pdev->subsystem_vendor == 0x1043)) { + for (i = 0; i < NUM_GFXCLK_DPM_LEVELS; i++) { + if (freq_table_gfx[i] > 2500) + freq_table_gfx[i] = 2500; + } + } + + return 0; +} + static int sienna_cichlid_setup_pptable(struct smu_context *smu) { int ret = 0; @@ -441,7 +471,7 @@ static int sienna_cichlid_setup_pptable(struct smu_context *smu) if (ret) return ret; - return ret; + return sienna_cichlid_patch_pptable_quirk(smu); } static int sienna_cichlid_tables_init(struct smu_context *smu) From 4d22336f903930eb94588b939c310743a3640276 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Tue, 15 Feb 2022 19:53:37 +0100 Subject: [PATCH 371/493] drm/amd/display: For vblank_disable_immediate, check PSR is really used MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Even if PSR is allowed for a present GPU, there might be no eDP link which supports PSR. Fixes: 708978487304 ("drm/amdgpu/display: Only set vblank_disable_immediate when PSR is not enabled") Reviewed-by: Harry Wentland Signed-off-by: Michel Dänzer Signed-off-by: Alex Deucher --- .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 7c1c623ba79930..075429bea4275d 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -4256,6 +4256,9 @@ static int amdgpu_dm_initialize_drm_device(struct amdgpu_device *adev) } #endif + /* Disable vblank IRQs aggressively for power-saving. */ + adev_to_drm(adev)->vblank_disable_immediate = true; + /* loops over all connectors on the board */ for (i = 0; i < link_cnt; i++) { struct dc_link *link = NULL; @@ -4301,19 +4304,17 @@ static int amdgpu_dm_initialize_drm_device(struct amdgpu_device *adev) update_connector_ext_caps(aconnector); if (psr_feature_enabled) amdgpu_dm_set_psr_caps(link); + + /* TODO: Fix vblank control helpers to delay PSR entry to allow this when + * PSR is also supported. + */ + if (link->psr_settings.psr_feature_enabled) + adev_to_drm(adev)->vblank_disable_immediate = false; } } - /* - * Disable vblank IRQs aggressively for power-saving. - * - * TODO: Fix vblank control helpers to delay PSR entry to allow this when PSR - * is also supported. - */ - adev_to_drm(adev)->vblank_disable_immediate = !psr_feature_enabled; - /* Software is initialized. Now we can register interrupt handlers. */ switch (adev->asic_type) { #if defined(CONFIG_DRM_AMD_DC_SI) From 5f6b0f2d037c8864f20ff15311c695f65eb09db5 Mon Sep 17 00:00:00 2001 From: Sergey Shtylyov Date: Sat, 19 Feb 2022 23:04:29 +0300 Subject: [PATCH 372/493] ata: pata_hpt37x: fix PCI clock detection The f_CNT register (at the PCI config. address 0x78) is 16-bit, not 8-bit! The bug was there from the very start... :-( Signed-off-by: Sergey Shtylyov Fixes: 669a5db411d8 ("[libata] Add a bunch of PATA drivers.") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal --- drivers/ata/pata_hpt37x.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 7abc7e04f65616..1baaca7b72edd2 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -950,14 +950,14 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) if ((freq >> 12) != 0xABCDE) { int i; - u8 sr; + u16 sr; u32 total = 0; dev_warn(&dev->dev, "BIOS has not set timing clocks\n"); /* This is the process the HPT371 BIOS is reported to use */ for (i = 0; i < 128; i++) { - pci_read_config_byte(dev, 0x78, &sr); + pci_read_config_word(dev, 0x78, &sr); total += sr & 0x1FF; udelay(15); } From dad3bdeef45f81a6e90204bcc85360bb76eccec7 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Mon, 21 Feb 2022 13:31:49 +0100 Subject: [PATCH 373/493] netfilter: nf_tables: fix memory leak during stateful obj update stateful objects can be updated from the control plane. The transaction logic allocates a temporary object for this purpose. The ->init function was called for this object, so plain kfree() leaks resources. We must call ->destroy function of the object. nft_obj_destroy does this, but it also decrements the module refcount, but the update path doesn't increment it. To avoid special-casing the update object release, do module_get for the update case too and release it via nft_obj_destroy(). Fixes: d62d0ba97b58 ("netfilter: nf_tables: Introduce stateful object update operation") Cc: Fernando Fernandez Mancera Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_tables_api.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 3081c4399f10f2..9cd1d7a6280458 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -6551,12 +6551,15 @@ static int nf_tables_updobj(const struct nft_ctx *ctx, { struct nft_object *newobj; struct nft_trans *trans; - int err; + int err = -ENOMEM; + + if (!try_module_get(type->owner)) + return -ENOENT; trans = nft_trans_alloc(ctx, NFT_MSG_NEWOBJ, sizeof(struct nft_trans_obj)); if (!trans) - return -ENOMEM; + goto err_trans; newobj = nft_obj_init(ctx, type, attr); if (IS_ERR(newobj)) { @@ -6573,6 +6576,8 @@ static int nf_tables_updobj(const struct nft_ctx *ctx, err_free_trans: kfree(trans); +err_trans: + module_put(type->owner); return err; } @@ -8185,7 +8190,7 @@ static void nft_obj_commit_update(struct nft_trans *trans) if (obj->ops->update) obj->ops->update(obj, newobj); - kfree(newobj); + nft_obj_destroy(&trans->ctx, newobj); } static void nft_commit_release(struct nft_trans *trans) @@ -8976,7 +8981,7 @@ static int __nf_tables_abort(struct net *net, enum nfnl_abort_action action) break; case NFT_MSG_NEWOBJ: if (nft_trans_obj_update(trans)) { - kfree(nft_trans_obj_newobj(trans)); + nft_obj_destroy(&trans->ctx, nft_trans_obj_newobj(trans)); nft_trans_destroy(trans); } else { trans->ctx.table->use--; From d8f7a5484f2188e9af2d9e4e587587d724501b12 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?M=C3=A5rten=20Lindahl?= Date: Wed, 16 Feb 2022 10:41:28 +0100 Subject: [PATCH 374/493] driver core: Free DMA range map when device is released MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When unbinding/binding a driver with DMA mapped memory, the DMA map is not freed before the driver is reloaded. This leads to a memory leak when the DMA map is overwritten when reprobing the driver. This can be reproduced with a platform driver having a dma-range: dummy { ... #address-cells = <0x2>; #size-cells = <0x2>; ranges; dma-ranges = <...>; ... }; and then unbinding/binding it: ~# echo soc:dummy >/sys/bus/platform/drivers//unbind DMA map object 0xffffff800b0ae540 still being held by &pdev->dev ~# echo soc:dummy >/sys/bus/platform/drivers//bind ~# echo scan > /sys/kernel/debug/kmemleak ~# cat /sys/kernel/debug/kmemleak unreferenced object 0xffffff800b0ae540 (size 64): comm "sh", pid 833, jiffies 4295174550 (age 2535.352s) hex dump (first 32 bytes): 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 80 00 00 00 00 00 00 00 80 00 00 00 00 ................ backtrace: [] create_object.isra.0+0x108/0x344 [] kmemleak_alloc+0x8c/0xd0 [] __kmalloc+0x440/0x6f0 [] of_dma_get_range+0x124/0x220 [] of_dma_configure_id+0x40/0x2d0 [] platform_dma_configure+0x5c/0xa4 [] really_probe+0x8c/0x514 [] __driver_probe_device+0x9c/0x19c [] device_driver_attach+0x54/0xbc [] bind_store+0xc4/0x120 [] drv_attr_store+0x30/0x44 [] sysfs_kf_write+0x50/0x60 [] kernfs_fop_write_iter+0x124/0x1b4 [] new_sync_write+0xdc/0x160 [] vfs_write+0x23c/0x2a0 [] ksys_write+0x64/0xec To prevent this we should free the dma_range_map when the device is released. Fixes: e0d072782c73 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset") Cc: stable Suggested-by: Rob Herring Reviewed-by: Rob Herring Signed-off-by: Mårten Lindahl Link: https://lore.kernel.org/r/20220216094128.4025861-1-marten.lindahl@axis.com Signed-off-by: Greg Kroah-Hartman --- drivers/base/dd.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/base/dd.c b/drivers/base/dd.c index 9eaaff2f556cea..f47cab21430f9f 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -629,6 +629,9 @@ static int really_probe(struct device *dev, struct device_driver *drv) drv->remove(dev); devres_release_all(dev); + arch_teardown_dma_ops(dev); + kfree(dev->dma_range_map); + dev->dma_range_map = NULL; driver_sysfs_remove(dev); dev->driver = NULL; dev_set_drvdata(dev, NULL); @@ -1209,6 +1212,8 @@ static void __device_release_driver(struct device *dev, struct device *parent) devres_release_all(dev); arch_teardown_dma_ops(dev); + kfree(dev->dma_range_map); + dev->dma_range_map = NULL; dev->driver = NULL; dev_set_drvdata(dev, NULL); if (dev->pm_domain && dev->pm_domain->dismiss) From f0fdfc04fd974cea23351b830fcac0822ea19a51 Mon Sep 17 00:00:00 2001 From: Adam Ward Date: Tue, 22 Feb 2022 00:27:42 +0000 Subject: [PATCH 375/493] regulator: da9121: Fix DA914x current values Update DA9141/2 ranges to correct errors Signed-off-by: Adam Ward Link: https://lore.kernel.org/r/cd5732c5061ce49dcfbcebb306d12ba1664b4ea6.1645489455.git.Adam.Ward.opensource@diasemi.com Signed-off-by: Mark Brown --- drivers/regulator/da9121-regulator.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/regulator/da9121-regulator.c b/drivers/regulator/da9121-regulator.c index 6f21223a488e55..39d77726970cac 100644 --- a/drivers/regulator/da9121-regulator.c +++ b/drivers/regulator/da9121-regulator.c @@ -87,16 +87,16 @@ static struct da9121_range da9121_3A_1phase_current = { }; static struct da9121_range da914x_40A_4phase_current = { - .val_min = 14000000, - .val_max = 80000000, - .val_stp = 2000000, + .val_min = 26000000, + .val_max = 78000000, + .val_stp = 4000000, .reg_min = 1, .reg_max = 14, }; static struct da9121_range da914x_20A_2phase_current = { - .val_min = 7000000, - .val_max = 40000000, + .val_min = 13000000, + .val_max = 39000000, .val_stp = 2000000, .reg_min = 1, .reg_max = 14, From c8c57fbc1c5067b913077e948c7d957af6834ba3 Mon Sep 17 00:00:00 2001 From: Adam Ward Date: Tue, 22 Feb 2022 00:27:43 +0000 Subject: [PATCH 376/493] regulator: da9121: Fix DA914x voltage value Update DA9141/2 max voltage to match spec change Signed-off-by: Adam Ward Link: https://lore.kernel.org/r/9d1ec5b6db70d27f56d05b8a0139fc0840f03e20.1645489455.git.Adam.Ward.opensource@diasemi.com Signed-off-by: Mark Brown --- drivers/regulator/da9121-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/da9121-regulator.c b/drivers/regulator/da9121-regulator.c index 39d77726970cac..f16649dec17e07 100644 --- a/drivers/regulator/da9121-regulator.c +++ b/drivers/regulator/da9121-regulator.c @@ -561,7 +561,7 @@ static const struct regulator_desc da9217_reg = { }; #define DA914X_MIN_MV 500 -#define DA914X_MAX_MV 1000 +#define DA914X_MAX_MV 1300 #define DA914X_STEP_MV 10 #define DA914X_MIN_SEL (DA914X_MIN_MV / DA914X_STEP_MV) #define DA914X_N_VOLTAGES (((DA914X_MAX_MV - DA914X_MIN_MV) / DA914X_STEP_MV) \ From 9c7cf33c53ce833b58de9e5c192b4736dbd09cb1 Mon Sep 17 00:00:00 2001 From: Adam Ward Date: Tue, 22 Feb 2022 00:27:44 +0000 Subject: [PATCH 377/493] regulator: da9121: Remove surplus DA9141 parameters Remove ramp_delay/enable_time values - subject to OTP, incorrect Signed-off-by: Adam Ward Link: https://lore.kernel.org/r/a175201b4a7ea323c6a70d77f7f6d2124bfc0bed.1645489455.git.Adam.Ward.opensource@diasemi.com Signed-off-by: Mark Brown --- drivers/regulator/da9121-regulator.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/regulator/da9121-regulator.c b/drivers/regulator/da9121-regulator.c index f16649dec17e07..eb9df485bd8aaf 100644 --- a/drivers/regulator/da9121-regulator.c +++ b/drivers/regulator/da9121-regulator.c @@ -585,10 +585,6 @@ static const struct regulator_desc da9141_reg = { .vsel_mask = DA9121_MASK_BUCK_BUCKx_5_CHx_A_VOUT, .enable_reg = DA9121_REG_BUCK_BUCK1_0, .enable_mask = DA9121_MASK_BUCK_BUCKx_0_CHx_EN, - /* Default value of BUCK_BUCK1_0.CH1_SRC_DVC_UP */ - .ramp_delay = 20000, - /* tBUCK_EN */ - .enable_time = 20, }; static const struct regulator_desc da9142_reg = { From bb49c6fa8b845591b317b0d7afea4ae60ec7f3aa Mon Sep 17 00:00:00 2001 From: Stefano Garzarella Date: Fri, 11 Feb 2022 10:01:36 +0100 Subject: [PATCH 378/493] block: clear iocb->private in blkdev_bio_end_io_async() iocb_bio_iopoll() expects iocb->private to be cleared before releasing the bio. We already do this in blkdev_bio_end_io(), but we forgot in the recently added blkdev_bio_end_io_async(). Fixes: 54a88eb838d3 ("block: add single bio async direct IO helper") Cc: asml.silence@gmail.com Signed-off-by: Stefano Garzarella Reviewed-by: Ming Lei Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/r/20220211090136.44471-1-sgarzare@redhat.com Signed-off-by: Jens Axboe --- block/fops.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/block/fops.c b/block/fops.c index 4f59e0f5bf3096..a18e7fbd97b8bf 100644 --- a/block/fops.c +++ b/block/fops.c @@ -289,6 +289,8 @@ static void blkdev_bio_end_io_async(struct bio *bio) struct kiocb *iocb = dio->iocb; ssize_t ret; + WRITE_ONCE(iocb->private, NULL); + if (likely(!bio->bi_status)) { ret = dio->size; iocb->ki_pos += ret; From 93b71801a8274cd9511557faf04365a5de487197 Mon Sep 17 00:00:00 2001 From: Nicholas Piggin Date: Tue, 22 Feb 2022 09:06:54 -0500 Subject: [PATCH 379/493] KVM: PPC: reserve capability 210 for KVM_CAP_PPC_AIL_MODE_3 Add KVM_CAP_PPC_AIL_MODE_3 to advertise the capability to set the AIL resource mode to 3 with the H_SET_MODE hypercall. This capability differs between processor types and KVM types (PR, HV, Nested HV), and affects guest-visible behaviour. QEMU will implement a cap-ail-mode-3 to control this behaviour[1], and use the KVM CAP if available to determine KVM support[2]. Reviewed-by: Fabiano Rosas Signed-off-by: Nicholas Piggin Signed-off-by: Paolo Bonzini --- Documentation/virt/kvm/api.rst | 14 ++++++++++++++ include/uapi/linux/kvm.h | 1 + tools/include/uapi/linux/kvm.h | 1 + 3 files changed, 16 insertions(+) diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst index a4267104db50a4..9954568c7eaba7 100644 --- a/Documentation/virt/kvm/api.rst +++ b/Documentation/virt/kvm/api.rst @@ -6997,6 +6997,20 @@ indicated by the fd to the VM this is called on. This is intended to support intra-host migration of VMs between userspace VMMs, upgrading the VMM process without interrupting the guest. +7.30 KVM_CAP_PPC_AIL_MODE_3 +------------------------------- + +:Capability: KVM_CAP_PPC_AIL_MODE_3 +:Architectures: ppc +:Type: vm + +This capability indicates that the kernel supports the mode 3 setting for the +"Address Translation Mode on Interrupt" aka "Alternate Interrupt Location" +resource that is controlled with the H_SET_MODE hypercall. + +This capability allows a guest kernel to use a better-performance mode for +handling interrupts and system calls. + 8. Other capabilities. ====================== diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 5191b57e156220..507ee1f2aa96b1 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -1134,6 +1134,7 @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_VM_GPA_BITS 207 #define KVM_CAP_XSAVE2 208 #define KVM_CAP_SYS_ATTRIBUTES 209 +#define KVM_CAP_PPC_AIL_MODE_3 210 #ifdef KVM_CAP_IRQ_ROUTING diff --git a/tools/include/uapi/linux/kvm.h b/tools/include/uapi/linux/kvm.h index 5191b57e156220..507ee1f2aa96b1 100644 --- a/tools/include/uapi/linux/kvm.h +++ b/tools/include/uapi/linux/kvm.h @@ -1134,6 +1134,7 @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_VM_GPA_BITS 207 #define KVM_CAP_XSAVE2 208 #define KVM_CAP_SYS_ATTRIBUTES 209 +#define KVM_CAP_PPC_AIL_MODE_3 210 #ifdef KVM_CAP_IRQ_ROUTING From 1b5f517cca36292076d9e38fa6e33a257703e62e Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 21 Feb 2022 08:32:14 -0800 Subject: [PATCH 380/493] hwmon: Handle failure to register sensor with thermal zone correctly If an attempt is made to a sensor with a thermal zone and it fails, the call to devm_thermal_zone_of_sensor_register() may return -ENODEV. This may result in crashes similar to the following. Unable to handle kernel NULL pointer dereference at virtual address 00000000000003cd ... Internal error: Oops: 96000021 [#1] PREEMPT SMP ... pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mutex_lock+0x18/0x60 lr : thermal_zone_device_update+0x40/0x2e0 sp : ffff800014c4fc60 x29: ffff800014c4fc60 x28: ffff365ee3f6e000 x27: ffffdde218426790 x26: ffff365ee3f6e000 x25: 0000000000000000 x24: ffff365ee3f6e000 x23: ffffdde218426870 x22: ffff365ee3f6e000 x21: 00000000000003cd x20: ffff365ee8bf3308 x19: ffffffffffffffed x18: 0000000000000000 x17: ffffdde21842689c x16: ffffdde1cb7a0b7c x15: 0000000000000040 x14: ffffdde21a4889a0 x13: 0000000000000228 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000001120000 x7 : 0000000000000001 x6 : 0000000000000000 x5 : 0068000878e20f07 x4 : 0000000000000000 x3 : 00000000000003cd x2 : ffff365ee3f6e000 x1 : 0000000000000000 x0 : 00000000000003cd Call trace: mutex_lock+0x18/0x60 hwmon_notify_event+0xfc/0x110 0xffffdde1cb7a0a90 0xffffdde1cb7a0b7c irq_thread_fn+0x2c/0xa0 irq_thread+0x134/0x240 kthread+0x178/0x190 ret_from_fork+0x10/0x20 Code: d503201f d503201f d2800001 aa0103e4 (c8e47c02) Jon Hunter reports that the exact call sequence is: hwmon_notify_event() --> hwmon_thermal_notify() --> thermal_zone_device_update() --> update_temperature() --> mutex_lock() The hwmon core needs to handle all errors returned from calls to devm_thermal_zone_of_sensor_register(). If the call fails with -ENODEV, report that the sensor was not attached to a thermal zone but continue to register the hwmon device. Reported-by: Jon Hunter Cc: Dmitry Osipenko Fixes: 1597b374af222 ("hwmon: Add notification support") Reviewed-by: Dmitry Osipenko Tested-by: Jon Hunter Signed-off-by: Guenter Roeck --- drivers/hwmon/hwmon.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c index 3501a3ead4ba60..3ae961986fc312 100644 --- a/drivers/hwmon/hwmon.c +++ b/drivers/hwmon/hwmon.c @@ -214,12 +214,14 @@ static int hwmon_thermal_add_sensor(struct device *dev, int index) tzd = devm_thermal_zone_of_sensor_register(dev, index, tdata, &hwmon_thermal_ops); - /* - * If CONFIG_THERMAL_OF is disabled, this returns -ENODEV, - * so ignore that error but forward any other error. - */ - if (IS_ERR(tzd) && (PTR_ERR(tzd) != -ENODEV)) - return PTR_ERR(tzd); + if (IS_ERR(tzd)) { + if (PTR_ERR(tzd) != -ENODEV) + return PTR_ERR(tzd); + dev_info(dev, "temp%d_input not attached to any thermal zone\n", + index + 1); + devm_kfree(dev, tdata); + return 0; + } err = devm_add_action(dev, hwmon_thermal_remove_sensor, &tdata->node); if (err) From 35f165f08950a876f1b95a61d79c93678fba2fd6 Mon Sep 17 00:00:00 2001 From: Vikash Chandola Date: Tue, 22 Feb 2022 13:12:53 +0000 Subject: [PATCH 381/493] hwmon: (pmbus) Clear pmbus fault/warning bits after read Almost all fault/warning bits in pmbus status registers remain set even after fault/warning condition are removed. As per pmbus specification these faults must be cleared by user. Modify hwmon behavior to clear fault/warning bit after fetching data if fault/warning bit was set. This allows to get fresh data in next read. Signed-off-by: Vikash Chandola Link: https://lore.kernel.org/r/20220222131253.2426834-1-vikash.chandola@linux.intel.com Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/pmbus_core.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c index 776ee2237be20a..ac2fbee1ba9c0d 100644 --- a/drivers/hwmon/pmbus/pmbus_core.c +++ b/drivers/hwmon/pmbus/pmbus_core.c @@ -911,6 +911,11 @@ static int pmbus_get_boolean(struct i2c_client *client, struct pmbus_boolean *b, pmbus_update_sensor_data(client, s2); regval = status & mask; + if (regval) { + ret = pmbus_write_byte_data(client, page, reg, regval); + if (ret) + goto unlock; + } if (s1 && s2) { s64 v1, v2; From 80912cef18f16f8fe59d1fb9548d4364342be360 Mon Sep 17 00:00:00 2001 From: Dylan Yudaken Date: Tue, 22 Feb 2022 08:17:51 -0800 Subject: [PATCH 382/493] io_uring: disallow modification of rsrc_data during quiesce io_rsrc_ref_quiesce will unlock the uring while it waits for references to the io_rsrc_data to be killed. There are other places to the data that might add references to data via calls to io_rsrc_node_switch. There is a race condition where this reference can be added after the completion has been signalled. At this point the io_rsrc_ref_quiesce call will wake up and relock the uring, assuming the data is unused and can be freed - although it is actually being used. To fix this check in io_rsrc_ref_quiesce if a resource has been revived. Reported-by: syzbot+ca8bf833622a1662745b@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Dylan Yudaken Link: https://lore.kernel.org/r/20220222161751.995746-1-dylany@fb.com Signed-off-by: Jens Axboe --- fs/io_uring.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index 928446fe131989..4715980e90150c 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -7926,7 +7926,15 @@ static __cold int io_rsrc_ref_quiesce(struct io_rsrc_data *data, ret = wait_for_completion_interruptible(&data->done); if (!ret) { mutex_lock(&ctx->uring_lock); - break; + if (atomic_read(&data->refs) > 0) { + /* + * it has been revived by another thread while + * we were unlocked + */ + mutex_unlock(&ctx->uring_lock); + } else { + break; + } } atomic_inc(&data->refs); From 84ec758fb2daa236026506868c8796b0500c047d Mon Sep 17 00:00:00 2001 From: ChenXiaoSong Date: Tue, 15 Feb 2022 15:10:30 +0800 Subject: [PATCH 383/493] configfs: fix a race in configfs_{,un}register_subsystem() When configfs_register_subsystem() or configfs_unregister_subsystem() is executing link_group() or unlink_group(), it is possible that two processes add or delete list concurrently. Some unfortunate interleavings of them can cause kernel panic. One of cases is: A --> B --> C --> D A <-- B <-- C <-- D delete list_head *B | delete list_head *C --------------------------------|----------------------------------- configfs_unregister_subsystem | configfs_unregister_subsystem unlink_group | unlink_group unlink_obj | unlink_obj list_del_init | list_del_init __list_del_entry | __list_del_entry __list_del | __list_del // next == C | next->prev = prev | | next->prev = prev prev->next = next | | // prev == B | prev->next = next Fix this by adding mutex when calling link_group() or unlink_group(), but parent configfs_subsystem is NULL when config_item is root. So I create a mutex configfs_subsystem_mutex. Fixes: 7063fbf22611 ("[PATCH] configfs: User-driven configuration filesystem") Signed-off-by: ChenXiaoSong Signed-off-by: Laibin Qiu Signed-off-by: Christoph Hellwig --- fs/configfs/dir.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c index d3cd2a94d1e8c3..d1f9d263220278 100644 --- a/fs/configfs/dir.c +++ b/fs/configfs/dir.c @@ -34,6 +34,14 @@ */ DEFINE_SPINLOCK(configfs_dirent_lock); +/* + * All of link_obj/unlink_obj/link_group/unlink_group require that + * subsys->su_mutex is held. + * But parent configfs_subsystem is NULL when config_item is root. + * Use this mutex when config_item is root. + */ +static DEFINE_MUTEX(configfs_subsystem_mutex); + static void configfs_d_iput(struct dentry * dentry, struct inode * inode) { @@ -1859,7 +1867,9 @@ int configfs_register_subsystem(struct configfs_subsystem *subsys) group->cg_item.ci_name = group->cg_item.ci_namebuf; sd = root->d_fsdata; + mutex_lock(&configfs_subsystem_mutex); link_group(to_config_group(sd->s_element), group); + mutex_unlock(&configfs_subsystem_mutex); inode_lock_nested(d_inode(root), I_MUTEX_PARENT); @@ -1884,7 +1894,9 @@ int configfs_register_subsystem(struct configfs_subsystem *subsys) inode_unlock(d_inode(root)); if (err) { + mutex_lock(&configfs_subsystem_mutex); unlink_group(group); + mutex_unlock(&configfs_subsystem_mutex); configfs_release_fs(); } put_fragment(frag); @@ -1931,7 +1943,9 @@ void configfs_unregister_subsystem(struct configfs_subsystem *subsys) dput(dentry); + mutex_lock(&configfs_subsystem_mutex); unlink_group(group); + mutex_unlock(&configfs_subsystem_mutex); configfs_release_fs(); } From 6d3971dab239e7db1691690a02ce6becf30689cb Mon Sep 17 00:00:00 2001 From: Christian Brauner Date: Mon, 21 Feb 2022 16:16:39 +0100 Subject: [PATCH 384/493] cgroup: clarify cgroup_css_set_fork() With recent fixes for the permission checking when moving a task into a cgroup using a file descriptor to a cgroup's cgroup.procs file and calling write() it seems a good idea to clarify CLONE_INTO_CGROUP permission checking with a comment. Cc: Tejun Heo Cc: Signed-off-by: Christian Brauner Signed-off-by: Tejun Heo --- kernel/cgroup/cgroup.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/kernel/cgroup/cgroup.c b/kernel/cgroup/cgroup.c index b31e1465868ab5..77702e089d6ae4 100644 --- a/kernel/cgroup/cgroup.c +++ b/kernel/cgroup/cgroup.c @@ -6161,6 +6161,20 @@ static int cgroup_css_set_fork(struct kernel_clone_args *kargs) if (ret) goto err; + /* + * Spawning a task directly into a cgroup works by passing a file + * descriptor to the target cgroup directory. This can even be an O_PATH + * file descriptor. But it can never be a cgroup.procs file descriptor. + * This was done on purpose so spawning into a cgroup could be + * conceptualized as an atomic + * + * fd = openat(dfd_cgroup, "cgroup.procs", ...); + * write(fd, , ...); + * + * sequence, i.e. it's a shorthand for the caller opening and writing + * cgroup.procs of the cgroup indicated by @dfd_cgroup. This allows us + * to always use the caller's credentials. + */ ret = cgroup_attach_permissions(cset->dfl_cgrp, dst_cgrp, sb, !(kargs->flags & CLONE_THREAD), current->nsproxy->cgroup_ns); From 467a726b754f474936980da793b4ff2ec3e382a7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michal=20Koutn=C3=BD?= Date: Thu, 17 Feb 2022 17:11:28 +0100 Subject: [PATCH 385/493] cgroup-v1: Correct privileges check in release_agent writes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The idea is to check: a) the owning user_ns of cgroup_ns, b) capabilities in init_user_ns. The commit 24f600856418 ("cgroup-v1: Require capabilities to set release_agent") got this wrong in the write handler of release_agent since it checked user_ns of the opener (may be different from the owning user_ns of cgroup_ns). Secondly, to avoid possibly confused deputy, the capability of the opener must be checked. Fixes: 24f600856418 ("cgroup-v1: Require capabilities to set release_agent") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/stable/20220216121142.GB30035@blackbody.suse.cz/ Signed-off-by: Michal Koutný Reviewed-by: Masami Ichikawa(CIP) Signed-off-by: Tejun Heo --- kernel/cgroup/cgroup-v1.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/kernel/cgroup/cgroup-v1.c b/kernel/cgroup/cgroup-v1.c index 0e877dbcfeea9c..afc6c0e9c966e1 100644 --- a/kernel/cgroup/cgroup-v1.c +++ b/kernel/cgroup/cgroup-v1.c @@ -546,6 +546,7 @@ static ssize_t cgroup_release_agent_write(struct kernfs_open_file *of, char *buf, size_t nbytes, loff_t off) { struct cgroup *cgrp; + struct cgroup_file_ctx *ctx; BUILD_BUG_ON(sizeof(cgrp->root->release_agent_path) < PATH_MAX); @@ -553,8 +554,9 @@ static ssize_t cgroup_release_agent_write(struct kernfs_open_file *of, * Release agent gets called with all capabilities, * require capabilities to set release agent. */ - if ((of->file->f_cred->user_ns != &init_user_ns) || - !capable(CAP_SYS_ADMIN)) + ctx = of->priv; + if ((ctx->ns->user_ns != &init_user_ns) || + !file_ns_capable(of->file, &init_user_ns, CAP_SYS_ADMIN)) return -EPERM; cgrp = cgroup_kn_lock_live(of->kn, false); From c70cd039f1d779126347a896a58876782dcc5284 Mon Sep 17 00:00:00 2001 From: Jiapeng Chong Date: Wed, 16 Feb 2022 11:17:53 +0800 Subject: [PATCH 386/493] cpuset: Fix kernel-doc Fix the following W=1 kernel warnings: kernel/cgroup/cpuset.c:3718: warning: expecting prototype for cpuset_memory_pressure_bump(). Prototype was for __cpuset_memory_pressure_bump() instead. kernel/cgroup/cpuset.c:3568: warning: expecting prototype for cpuset_node_allowed(). Prototype was for __cpuset_node_allowed() instead. Reported-by: Abaci Robot Signed-off-by: Jiapeng Chong Signed-off-by: Tejun Heo --- kernel/cgroup/cpuset.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/kernel/cgroup/cpuset.c b/kernel/cgroup/cpuset.c index 97c53f3cc91740..5de18448016cda 100644 --- a/kernel/cgroup/cpuset.c +++ b/kernel/cgroup/cpuset.c @@ -3524,8 +3524,8 @@ static struct cpuset *nearest_hardwall_ancestor(struct cpuset *cs) return cs; } -/** - * cpuset_node_allowed - Can we allocate on a memory node? +/* + * __cpuset_node_allowed - Can we allocate on a memory node? * @node: is this an allowed node? * @gfp_mask: memory allocation flags * @@ -3696,8 +3696,8 @@ void cpuset_print_current_mems_allowed(void) int cpuset_memory_pressure_enabled __read_mostly; -/** - * cpuset_memory_pressure_bump - keep stats of per-cpuset reclaims. +/* + * __cpuset_memory_pressure_bump - keep stats of per-cpuset reclaims. * * Keep a running average of the rate of synchronous (direct) * page reclaim efforts initiated by tasks in each cpuset. @@ -3712,7 +3712,7 @@ int cpuset_memory_pressure_enabled __read_mostly; * "memory_pressure". Value displayed is an integer * representing the recent rate of entry into the synchronous * (direct) page reclaim by any task attached to the cpuset. - **/ + */ void __cpuset_memory_pressure_bump(void) { From 69560e366fc4d5fca7bebb0e44edbfafc8bcaf05 Mon Sep 17 00:00:00 2001 From: Alexey Bayduraev Date: Fri, 18 Feb 2022 18:23:41 +0300 Subject: [PATCH 387/493] perf data: Fix double free in perf_session__delete() When perf_data__create_dir() fails, it calls close_dir(), but perf_session__delete() also calls close_dir() and since dir.version and dir.nr were initialized by perf_data__create_dir(), a double free occurs. This patch moves the initialization of dir.version and dir.nr after successful initialization of dir.files, that prevents double freeing. This behavior is already implemented in perf_data__open_dir(). Fixes: 145520631130bd64 ("perf data: Add perf_data__(create_dir|close_dir) functions") Signed-off-by: Alexey Bayduraev Acked-by: Jiri Olsa Cc: Adrian Hunter Cc: Alexander Antonov Cc: Alexander Shishkin Cc: Alexei Budankov Cc: Andi Kleen Cc: Ingo Molnar Cc: Namhyung Kim Cc: Peter Zijlstra Link: https://lore.kernel.org/r/20220218152341.5197-2-alexey.v.bayduraev@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/data.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/tools/perf/util/data.c b/tools/perf/util/data.c index f5d260b1df4d1c..15a4547d608eca 100644 --- a/tools/perf/util/data.c +++ b/tools/perf/util/data.c @@ -44,10 +44,6 @@ int perf_data__create_dir(struct perf_data *data, int nr) if (!files) return -ENOMEM; - data->dir.version = PERF_DIR_VERSION; - data->dir.files = files; - data->dir.nr = nr; - for (i = 0; i < nr; i++) { struct perf_data_file *file = &files[i]; @@ -62,6 +58,9 @@ int perf_data__create_dir(struct perf_data *data, int nr) file->fd = ret; } + data->dir.version = PERF_DIR_VERSION; + data->dir.files = files; + data->dir.nr = nr; return 0; out_err: From 5b061a322b05a5e023d9a0df1ae1f8bb562ed87b Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 7 Aug 2020 08:45:47 -0300 Subject: [PATCH 388/493] tools arch x86: Sync the msr-index.h copy with the kernel sources To pick up the changes in: 3915035282573c5e ("KVM: x86: SVM: move avic definitions from AMD's spec to svm.h") Addressing these tools/perf build warnings: diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' That makes the beautification scripts to pick some new entries: $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after --- before 2022-02-22 17:35:36.996271430 -0300 +++ after 2022-02-22 17:35:46.258503347 -0300 @@ -287,6 +287,7 @@ [0xc0010114 - x86_AMD_V_KVM_MSRs_offset] = "VM_CR", [0xc0010115 - x86_AMD_V_KVM_MSRs_offset] = "VM_IGNNE", [0xc0010117 - x86_AMD_V_KVM_MSRs_offset] = "VM_HSAVE_PA", + [0xc001011b - x86_AMD_V_KVM_MSRs_offset] = "AMD64_SVM_AVIC_DOORBELL", [0xc001011e - x86_AMD_V_KVM_MSRs_offset] = "AMD64_VM_PAGE_FLUSH", [0xc001011f - x86_AMD_V_KVM_MSRs_offset] = "AMD64_VIRT_SPEC_CTRL", [0xc0010130 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_SEV_ES_GHCB", $ And this gets rebuilt: CC /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o LD /tmp/build/perf/trace/beauty/tracepoints/perf-in.o LD /tmp/build/perf/trace/beauty/perf-in.o CC /tmp/build/perf/util/amd-sample-raw.o LD /tmp/build/perf/util/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Now one can trace systemwide asking to see backtraces to where those MSRs are being read/written with: # perf trace -e msr:*_msr/max-stack=32/ --filter="msr>=AMD64_SVM_AVIC_DOORBELL && msr<=AMD64_SEV_ES_GHCB" ^C# If we use -v (verbose mode) we can see what it does behind the scenes: # perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr>=AMD64_SVM_AVIC_DOORBELL && msr<=AMD64_SEV_ES_GHCB" Using CPUID AuthenticAMD-25-21-0 0xc001011b 0xc0010130 New filter for msr:read_msr: (msr>=0xc001011b && msr<=0xc0010130) && (common_pid != 1019953 && common_pid != 3629) 0xc001011b 0xc0010130 New filter for msr:write_msr: (msr>=0xc001011b && msr<=0xc0010130) && (common_pid != 1019953 && common_pid != 3629) mmap size 528384B ^C# Example with a frequent msr: # perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_SPEC_CTRL" --max-events 2 Using CPUID AuthenticAMD-25-21-0 0x48 New filter for msr:read_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841) 0x48 New filter for msr:write_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841) mmap size 528384B Looking at the vmlinux_path (8 entries long) symsrc__init: build id mismatch for vmlinux. Using /proc/kcore for kernel data Using /proc/kallsyms for symbols 0.000 Timer/2525383 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) __switch_to_xtra ([kernel.kallsyms]) __switch_to ([kernel.kallsyms]) __schedule ([kernel.kallsyms]) schedule ([kernel.kallsyms]) futex_wait_queue_me ([kernel.kallsyms]) futex_wait ([kernel.kallsyms]) do_futex ([kernel.kallsyms]) __x64_sys_futex ([kernel.kallsyms]) do_syscall_64 ([kernel.kallsyms]) entry_SYSCALL_64_after_hwframe ([kernel.kallsyms]) __futex_abstimed_wait_common64 (/usr/lib64/libpthread-2.33.so) 0.030 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL, val: 2) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) __switch_to_xtra ([kernel.kallsyms]) __switch_to ([kernel.kallsyms]) __schedule ([kernel.kallsyms]) schedule_idle ([kernel.kallsyms]) do_idle ([kernel.kallsyms]) cpu_startup_entry ([kernel.kallsyms]) secondary_startup_64_no_verify ([kernel.kallsyms]) # Cc: Adrian Hunter Cc: Ian Rogers Cc: Jiri Olsa Cc: Maxim Levitsky Cc: Namhyung Kim Cc: Paolo Bonzini Link: http://lore.kernel.org/lkml/YhVKxaft+z8rpOfy@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/arch/x86/include/asm/msr-index.h | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/arch/x86/include/asm/msr-index.h b/tools/arch/x86/include/asm/msr-index.h index 3faf0f97edb1bc..a4a39c3e0f1967 100644 --- a/tools/arch/x86/include/asm/msr-index.h +++ b/tools/arch/x86/include/asm/msr-index.h @@ -476,6 +476,7 @@ #define MSR_AMD64_ICIBSEXTDCTL 0xc001103c #define MSR_AMD64_IBSOPDATA4 0xc001103d #define MSR_AMD64_IBS_REG_COUNT_MAX 8 /* includes MSR_AMD64_IBSBRTARGET */ +#define MSR_AMD64_SVM_AVIC_DOORBELL 0xc001011b #define MSR_AMD64_VM_PAGE_FLUSH 0xc001011e #define MSR_AMD64_SEV_ES_GHCB 0xc0010130 #define MSR_AMD64_SEV 0xc0010131 From 34f3eda8c8ffd4d0b2145ac11c91cc365cd1ada3 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 14 Feb 2022 09:23:49 +0100 Subject: [PATCH 389/493] MAINTAINERS: sifive: drop Yash Shah Emails to Yash Shah bounce with "The email account that you tried to reach does not exist.", so drop him from all maintainer entries. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20220214082349.162973-1-krzysztof.kozlowski@canonical.com --- Documentation/devicetree/bindings/gpio/sifive,gpio.yaml | 1 - Documentation/devicetree/bindings/pwm/pwm-sifive.yaml | 1 - .../devicetree/bindings/riscv/sifive-l2-cache.yaml | 1 - MAINTAINERS | 6 ------ 4 files changed, 9 deletions(-) diff --git a/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml b/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml index e04349567eebb7..427c5873f96a79 100644 --- a/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml @@ -7,7 +7,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: SiFive GPIO controller maintainers: - - Yash Shah - Paul Walmsley properties: diff --git a/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml b/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml index 84e66913d042ef..db41cd7bf1509f 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml +++ b/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml @@ -8,7 +8,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: SiFive PWM controller maintainers: - - Yash Shah - Sagar Kadam - Paul Walmsley diff --git a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml index 2b1f9160389721..e2d330bd4608ab 100644 --- a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml +++ b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml @@ -9,7 +9,6 @@ title: SiFive L2 Cache Controller maintainers: - Sagar Kadam - - Yash Shah - Paul Walmsley description: diff --git a/MAINTAINERS b/MAINTAINERS index ea3e6c91438481..9d89755f911ef9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7006,12 +7006,6 @@ L: linux-edac@vger.kernel.org S: Maintained F: drivers/edac/sb_edac.c -EDAC-SIFIVE -M: Yash Shah -L: linux-edac@vger.kernel.org -S: Supported -F: drivers/edac/sifive_edac.c - EDAC-SKYLAKE M: Tony Luck L: linux-edac@vger.kernel.org From 0c0822bcb73f154d96ee648644ec5a8628e3b864 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 21 Feb 2022 11:07:01 +0100 Subject: [PATCH 390/493] dt-bindings: update Roger Quadros email Emails to Roger Quadros TI account bounce with: 550 Invalid recipient (#5.1.1) Signed-off-by: Krzysztof Kozlowski Acked-by: Roger Quadros Acked-By: Vinod Koul Acked-by: Lee Jones Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20220221100701.48593-1-krzysztof.kozlowski@canonical.com --- .../devicetree/bindings/mfd/ti,j721e-system-controller.yaml | 2 +- Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml | 2 +- Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml | 2 +- Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml index 272832e9f8f288..fa86691ebf1610 100644 --- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml @@ -20,7 +20,7 @@ description: | maintainers: - Kishon Vijay Abraham I - - Roger Quadros properties: compatible: diff --git a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml index cbbf5e8b11973c..f78d3246fbdcab 100644 --- a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml +++ b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml @@ -8,7 +8,7 @@ title: OMAP USB2 PHY maintainers: - Kishon Vijay Abraham I - - Roger Quadros + - Roger Quadros properties: compatible: diff --git a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml index a634774c537c45..eedde385d29949 100644 --- a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml +++ b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml @@ -7,7 +7,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Bindings for the TI wrapper module for the Cadence USBSS-DRD controller maintainers: - - Roger Quadros + - Roger Quadros properties: compatible: diff --git a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml index f6e91a5fd8fe7e..4f7a212fddd37d 100644 --- a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: TI Keystone Soc USB Controller maintainers: - - Roger Quadros + - Roger Quadros properties: compatible: From ce2fc710c9d2b25afc710f49bb2065b4439a62bc Mon Sep 17 00:00:00 2001 From: Ondrej Mosnacek Date: Mon, 21 Feb 2022 15:06:49 +0100 Subject: [PATCH 391/493] selinux: fix misuse of mutex_is_locked() mutex_is_locked() tests whether the mutex is locked *by any task*, while here we want to test if it is held *by the current task*. To avoid false/missed WARNINGs, use lockdep_assert_is_held() and lockdep_assert_is_not_held() instead, which do the right thing (though they are a no-op if CONFIG_LOCKDEP=n). Cc: stable@vger.kernel.org Fixes: 2554a48f4437 ("selinux: measure state and policy capabilities") Signed-off-by: Ondrej Mosnacek Signed-off-by: Paul Moore --- security/selinux/ima.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/security/selinux/ima.c b/security/selinux/ima.c index 727c4e43219d71..ff7aea6b3774a8 100644 --- a/security/selinux/ima.c +++ b/security/selinux/ima.c @@ -77,7 +77,7 @@ void selinux_ima_measure_state_locked(struct selinux_state *state) size_t policy_len; int rc = 0; - WARN_ON(!mutex_is_locked(&state->policy_mutex)); + lockdep_assert_held(&state->policy_mutex); state_str = selinux_ima_collect_state(state); if (!state_str) { @@ -117,7 +117,7 @@ void selinux_ima_measure_state_locked(struct selinux_state *state) */ void selinux_ima_measure_state(struct selinux_state *state) { - WARN_ON(mutex_is_locked(&state->policy_mutex)); + lockdep_assert_not_held(&state->policy_mutex); mutex_lock(&state->policy_mutex); selinux_ima_measure_state_locked(state); From 13e741b834538a225512912608f0182079fc64e2 Mon Sep 17 00:00:00 2001 From: German Gomez Date: Mon, 21 Feb 2022 17:17:06 +0000 Subject: [PATCH 392/493] perf script: Fix error when printing 'weight' field In SPE traces the 'weight' field can't be printed in 'perf script' because the 'dummy:u' event doesn't have the WEIGHT attribute set. Use evsel__do_check_stype(..) to check this field, as it's done with other fields such as "phys_addr". Before: $ perf record -e arm_spe_0// -- sleep 1 $ perf script -F event,ip,weight Samples for 'dummy:u' event do not have WEIGHT attribute set. Cannot print 'weight' field. After: $ perf script -F event,ip,weight l1d-access: 12 ffffaf629d4cb320 tlb-access: 12 ffffaf629d4cb320 memory: 12 ffffaf629d4cb320 Fixes: b0fde9c6e291e528 ("perf arm-spe: Add SPE total latency as PERF_SAMPLE_WEIGHT") Signed-off-by: German Gomez Acked-by: Jiri Olsa Cc: Alexander Shishkin Cc: Mark Rutland Cc: Namhyung Kim Link: https://lore.kernel.org/r/20220221171707.62960-1-german.gomez@arm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-script.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/builtin-script.c b/tools/perf/builtin-script.c index abae8184e171ed..fa478ddcd18ae0 100644 --- a/tools/perf/builtin-script.c +++ b/tools/perf/builtin-script.c @@ -463,7 +463,7 @@ static int evsel__check_attr(struct evsel *evsel, struct perf_session *session) return -EINVAL; if (PRINT_FIELD(WEIGHT) && - evsel__check_stype(evsel, PERF_SAMPLE_WEIGHT_TYPE, "WEIGHT", PERF_OUTPUT_WEIGHT)) + evsel__do_check_stype(evsel, PERF_SAMPLE_WEIGHT_TYPE, "WEIGHT", PERF_OUTPUT_WEIGHT, allow_user_set)) return -EINVAL; if (PRINT_FIELD(SYM) && From ef527f968ae05c6717c39f49c8709a7e2c19183a Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 20 Feb 2022 07:40:52 -0800 Subject: [PATCH 393/493] net: __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor friends Whenever one of these functions pull all data from an skb in a frag_list, use consume_skb() instead of kfree_skb() to avoid polluting drop monitoring. Fixes: 6fa01ccd8830 ("skbuff: Add pskb_extract() helper function") Signed-off-by: Eric Dumazet Link: https://lore.kernel.org/r/20220220154052.1308469-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski --- net/core/skbuff.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 6a15ce3eb1d338..b8138c372535b2 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -2276,7 +2276,7 @@ void *__pskb_pull_tail(struct sk_buff *skb, int delta) /* Free pulled out fragments. */ while ((list = skb_shinfo(skb)->frag_list) != insp) { skb_shinfo(skb)->frag_list = list->next; - kfree_skb(list); + consume_skb(list); } /* And insert new clone at head. */ if (clone) { @@ -6105,7 +6105,7 @@ static int pskb_carve_frag_list(struct sk_buff *skb, /* Free pulled out fragments. */ while ((list = shinfo->frag_list) != insp) { shinfo->frag_list = list->next; - kfree_skb(list); + consume_skb(list); } /* And insert new clone at head. */ if (clone) { From 8d093e02e898b24c58788b0289e3202317a96d2a Mon Sep 17 00:00:00 2001 From: Sergey Shtylyov Date: Sat, 19 Feb 2022 20:44:43 +0300 Subject: [PATCH 394/493] ata: pata_hpt37x: disable primary channel on HPT371 The HPT371 chip physically has only one channel, the secondary one, however the primary channel registers do exist! Thus we have to manually disable the non-existing channel if the BIOS hasn't done this already. Similarly to the pata_hpt3x2n driver, always disable the primary channel. Fixes: 669a5db411d8 ("[libata] Add a bunch of PATA drivers.") Cc: stable@vger.kernel.org Signed-off-by: Sergey Shtylyov Signed-off-by: Damien Le Moal --- drivers/ata/pata_hpt37x.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 1baaca7b72edd2..6fa4a2faf49c93 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -919,6 +919,20 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) irqmask &= ~0x10; pci_write_config_byte(dev, 0x5a, irqmask); + /* + * HPT371 chips physically have only one channel, the secondary one, + * but the primary channel registers do exist! Go figure... + * So, we manually disable the non-existing channel here + * (if the BIOS hasn't done this already). + */ + if (dev->device == PCI_DEVICE_ID_TTI_HPT371) { + u8 mcr1; + + pci_read_config_byte(dev, 0x50, &mcr1); + mcr1 &= ~0x04; + pci_write_config_byte(dev, 0x50, mcr1); + } + /* * default to pci clock. make sure MA15/16 are set to output * to prevent drives having problems with 40-pin cables. Needed From 342b6419193c6f697fd47d9c72fcff9cafc70687 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Alvin=20=C5=A0ipraga?= Date: Mon, 21 Feb 2022 21:35:38 +0100 Subject: [PATCH 395/493] net: dsa: fix panic when removing unoffloaded port from bridge MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If a bridged port is not offloaded to the hardware - either because the underlying driver does not implement the port_bridge_{join,leave} ops, or because the operation failed - then its dp->bridge pointer will be NULL when dsa_port_bridge_leave() is called. Avoid dereferncing NULL. This fixes the following splat when removing a port from a bridge: Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT_RT SMP CPU: 3 PID: 1119 Comm: brctl Tainted: G O 5.17.0-rc4-rt4 #1 Call trace: dsa_port_bridge_leave+0x8c/0x1e4 dsa_slave_changeupper+0x40/0x170 dsa_slave_netdevice_event+0x494/0x4d4 notifier_call_chain+0x80/0xe0 raw_notifier_call_chain+0x1c/0x24 call_netdevice_notifiers_info+0x5c/0xac __netdev_upper_dev_unlink+0xa4/0x200 netdev_upper_dev_unlink+0x38/0x60 del_nbp+0x1b0/0x300 br_del_if+0x38/0x114 add_del_if+0x60/0xa0 br_ioctl_stub+0x128/0x2dc br_ioctl_call+0x68/0xb0 dev_ifsioc+0x390/0x554 dev_ioctl+0x128/0x400 sock_do_ioctl+0xb4/0xf4 sock_ioctl+0x12c/0x4e0 __arm64_sys_ioctl+0xa8/0xf0 invoke_syscall+0x4c/0x110 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x28/0x84 el0_svc+0x1c/0x50 el0t_64_sync_handler+0xa8/0xb0 el0t_64_sync+0x17c/0x180 Code: f9402f00 f0002261 f9401302 913cc021 (a9401404) ---[ end trace 0000000000000000 ]--- Fixes: d3eed0e57d5d ("net: dsa: keep the bridge_dev and bridge_num as part of the same structure") Signed-off-by: Alvin Šipraga Reviewed-by: Vladimir Oltean Reviewed-by: Florian Fainelli Link: https://lore.kernel.org/r/20220221203539.310690-1-alvin@pqrs.dk Signed-off-by: Jakub Kicinski --- net/dsa/port.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/net/dsa/port.c b/net/dsa/port.c index eef4a98f262824..1a40c52f5a42dc 100644 --- a/net/dsa/port.c +++ b/net/dsa/port.c @@ -395,10 +395,17 @@ void dsa_port_bridge_leave(struct dsa_port *dp, struct net_device *br) .tree_index = dp->ds->dst->index, .sw_index = dp->ds->index, .port = dp->index, - .bridge = *dp->bridge, }; int err; + /* If the port could not be offloaded to begin with, then + * there is nothing to do. + */ + if (!dp->bridge) + return; + + info.bridge = *dp->bridge; + /* Here the port is already unbridged. Reflect the current configuration * so that drivers can program their chips accordingly. */ From 277f2bb14361790a70e4b3c649e794b75a91a597 Mon Sep 17 00:00:00 2001 From: Sukadev Bhattiprolu Date: Mon, 21 Feb 2022 15:05:45 -0600 Subject: [PATCH 396/493] ibmvnic: schedule failover only if vioctl fails If client is unable to initiate a failover reset via H_VIOCTL hcall, then it should schedule a failover reset as a last resort. Otherwise, there is no need to do a last resort. Fixes: 334c42414729 ("ibmvnic: improve failover sysfs entry") Reported-by: Cris Forno Signed-off-by: Sukadev Bhattiprolu Signed-off-by: Dany Madden Link: https://lore.kernel.org/r/20220221210545.115283-1-drt@linux.ibm.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/ibm/ibmvnic.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 29617a86b2995b..dee05a353dbd30 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -5917,10 +5917,14 @@ static ssize_t failover_store(struct device *dev, struct device_attribute *attr, be64_to_cpu(session_token)); rc = plpar_hcall_norets(H_VIOCTL, adapter->vdev->unit_address, H_SESSION_ERR_DETECTED, session_token, 0, 0); - if (rc) + if (rc) { netdev_err(netdev, "H_VIOCTL initiated failover failed, rc %ld\n", rc); + goto last_resort; + } + + return count; last_resort: netdev_dbg(netdev, "Trying to send CRQ_CMD, the last resort\n"); From f762ce78897d734a08f52e39a353359b7d417578 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Mon, 21 Feb 2022 09:31:28 +0100 Subject: [PATCH 397/493] drm/radeon: fix variable type MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When we switch to dma_resv_wait_timeout() the returned type changes as well. Signed-off-by: Christian König Fixes: 89aae41d740f ("drm/radeon: use dma_resv_wait_timeout() instead of manually waiting") Bug: https://bugzilla.kernel.org/show_bug.cgi?id=215600 Reviewed-by: Alex Deucher Link: https://patchwork.freedesktop.org/patch/msgid/20220221110503.2803-1-christian.koenig@amd.com --- drivers/gpu/drm/radeon/radeon_uvd.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_uvd.c b/drivers/gpu/drm/radeon/radeon_uvd.c index 377f9cdb5b53ff..84013faa4756f4 100644 --- a/drivers/gpu/drm/radeon/radeon_uvd.c +++ b/drivers/gpu/drm/radeon/radeon_uvd.c @@ -470,8 +470,8 @@ static int radeon_uvd_cs_msg(struct radeon_cs_parser *p, struct radeon_bo *bo, int32_t *msg, msg_type, handle; unsigned img_size = 0; void *ptr; - - int i, r; + long r; + int i; if (offset & 0x3F) { DRM_ERROR("UVD messages must be 64 byte aligned!\n"); @@ -481,13 +481,13 @@ static int radeon_uvd_cs_msg(struct radeon_cs_parser *p, struct radeon_bo *bo, r = dma_resv_wait_timeout(bo->tbo.base.resv, false, false, MAX_SCHEDULE_TIMEOUT); if (r <= 0) { - DRM_ERROR("Failed waiting for UVD message (%d)!\n", r); + DRM_ERROR("Failed waiting for UVD message (%ld)!\n", r); return r ? r : -ETIME; } r = radeon_bo_kmap(bo, &ptr); if (r) { - DRM_ERROR("Failed mapping the UVD message (%d)!\n", r); + DRM_ERROR("Failed mapping the UVD message (%ld)!\n", r); return r; } From 8913e1aea4b32a866343b14e565c62cec54f3f78 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 20 Dec 2021 11:28:22 +0100 Subject: [PATCH 398/493] drm/tegra: dpaux: Populate AUX bus The DPAUX hardware block exposes an DP AUX interface that provides access to an AUX bus and the devices on that bus. Use the DP AUX bus infrastructure that was recently introduced to probe devices on this bus from DT. Signed-off-by: Thierry Reding --- drivers/gpu/drm/tegra/Kconfig | 1 + drivers/gpu/drm/tegra/dpaux.c | 7 +++++++ 2 files changed, 8 insertions(+) diff --git a/drivers/gpu/drm/tegra/Kconfig b/drivers/gpu/drm/tegra/Kconfig index 8cf5aeb9db6c6b..201f5175ecfec7 100644 --- a/drivers/gpu/drm/tegra/Kconfig +++ b/drivers/gpu/drm/tegra/Kconfig @@ -5,6 +5,7 @@ config DRM_TEGRA depends on COMMON_CLK depends on DRM depends on OF + select DRM_DP_AUX_BUS select DRM_KMS_HELPER select DRM_MIPI_DSI select DRM_PANEL diff --git a/drivers/gpu/drm/tegra/dpaux.c b/drivers/gpu/drm/tegra/dpaux.c index 1f96e416fa0828..d7a731d287d234 100644 --- a/drivers/gpu/drm/tegra/dpaux.c +++ b/drivers/gpu/drm/tegra/dpaux.c @@ -19,6 +19,7 @@ #include #include +#include #include #include "dp.h" @@ -570,6 +571,12 @@ static int tegra_dpaux_probe(struct platform_device *pdev) list_add_tail(&dpaux->list, &dpaux_list); mutex_unlock(&dpaux_lock); + err = devm_of_dp_aux_populate_ep_devices(&dpaux->aux); + if (err < 0) { + dev_err(dpaux->dev, "failed to populate AUX bus: %d\n", err); + return err; + } + return 0; } From a58da53ffd70294ebea8ecd0eb45fd0d74add9f9 Mon Sep 17 00:00:00 2001 From: Stefano Garzarella Date: Tue, 22 Feb 2022 10:47:42 +0100 Subject: [PATCH 399/493] vhost/vsock: don't check owner in vhost_vsock_stop() while releasing vhost_vsock_stop() calls vhost_dev_check_owner() to check the device ownership. It expects current->mm to be valid. vhost_vsock_stop() is also called by vhost_vsock_dev_release() when the user has not done close(), so when we are in do_exit(). In this case current->mm is invalid and we're releasing the device, so we should clean it anyway. Let's check the owner only when vhost_vsock_stop() is called by an ioctl. When invoked from release we can not fail so we don't check return code of vhost_vsock_stop(). We need to stop vsock even if it's not the owner. Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko") Cc: stable@vger.kernel.org Reported-by: syzbot+1e3ea63db39f2b4440e0@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+3140b17cb44a7b174008@syzkaller.appspotmail.com Signed-off-by: Stefano Garzarella Acked-by: Jason Wang Signed-off-by: David S. Miller --- drivers/vhost/vsock.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c index d6ca1c7ad513ff..37f0b4274113c6 100644 --- a/drivers/vhost/vsock.c +++ b/drivers/vhost/vsock.c @@ -629,16 +629,18 @@ static int vhost_vsock_start(struct vhost_vsock *vsock) return ret; } -static int vhost_vsock_stop(struct vhost_vsock *vsock) +static int vhost_vsock_stop(struct vhost_vsock *vsock, bool check_owner) { size_t i; - int ret; + int ret = 0; mutex_lock(&vsock->dev.mutex); - ret = vhost_dev_check_owner(&vsock->dev); - if (ret) - goto err; + if (check_owner) { + ret = vhost_dev_check_owner(&vsock->dev); + if (ret) + goto err; + } for (i = 0; i < ARRAY_SIZE(vsock->vqs); i++) { struct vhost_virtqueue *vq = &vsock->vqs[i]; @@ -753,7 +755,12 @@ static int vhost_vsock_dev_release(struct inode *inode, struct file *file) * inefficient. Room for improvement here. */ vsock_for_each_connected_socket(vhost_vsock_reset_orphans); - vhost_vsock_stop(vsock); + /* Don't check the owner, because we are in the release path, so we + * need to stop the vsock device in any case. + * vhost_vsock_stop() can not fail in this case, so we don't need to + * check the return code. + */ + vhost_vsock_stop(vsock, false); vhost_vsock_flush(vsock); vhost_dev_stop(&vsock->dev); @@ -868,7 +875,7 @@ static long vhost_vsock_dev_ioctl(struct file *f, unsigned int ioctl, if (start) return vhost_vsock_start(vsock); else - return vhost_vsock_stop(vsock); + return vhost_vsock_stop(vsock, true); case VHOST_GET_FEATURES: features = VHOST_VSOCK_FEATURES; if (copy_to_user(argp, &features, sizeof(features))) From de7b2efacf4e83954aed3f029d347dfc0b7a4f49 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 22 Feb 2022 16:42:51 +0300 Subject: [PATCH 400/493] udp_tunnel: Fix end of loop test in udp_tunnel_nic_unregister() This test is checking if we exited the list via break or not. However if it did not exit via a break then "node" does not point to a valid udp_tunnel_nic_shared_node struct. It will work because of the way the structs are laid out it's the equivalent of "if (info->shared->udp_tunnel_nic_info != dev)" which will always be true, but it's not the right way to test. Fixes: 74cc6d182d03 ("udp_tunnel: add the ability to share port tables") Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- net/ipv4/udp_tunnel_nic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/udp_tunnel_nic.c b/net/ipv4/udp_tunnel_nic.c index b91003538d87a0..bc3a043a5d5c76 100644 --- a/net/ipv4/udp_tunnel_nic.c +++ b/net/ipv4/udp_tunnel_nic.c @@ -846,7 +846,7 @@ udp_tunnel_nic_unregister(struct net_device *dev, struct udp_tunnel_nic *utn) list_for_each_entry(node, &info->shared->devices, list) if (node->dev == dev) break; - if (node->dev != dev) + if (list_entry_is_head(node, &info->shared->devices, list)) return; list_del(&node->list); From a1f8fec4dac8bc7b172b2bdbd881e015261a6322 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 22 Feb 2022 16:43:12 +0300 Subject: [PATCH 401/493] tipc: Fix end of loop tests for list_for_each_entry() These tests are supposed to check if the loop exited via a break or not. However the tests are wrong because if we did not exit via a break then "p" is not a valid pointer. In that case, it's the equivalent of "if (*(u32 *)sr == *last_key) {". That's going to work most of the time, but there is a potential for those to be equal. Fixes: 1593123a6a49 ("tipc: add name table dump to new netlink api") Fixes: 1a1a143daf84 ("tipc: add publication dump to new netlink api") Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- net/tipc/name_table.c | 2 +- net/tipc/socket.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/net/tipc/name_table.c b/net/tipc/name_table.c index 01396dd1c899b0..1d8ba233d04748 100644 --- a/net/tipc/name_table.c +++ b/net/tipc/name_table.c @@ -967,7 +967,7 @@ static int __tipc_nl_add_nametable_publ(struct tipc_nl_msg *msg, list_for_each_entry(p, &sr->all_publ, all_publ) if (p->key == *last_key) break; - if (p->key != *last_key) + if (list_entry_is_head(p, &sr->all_publ, all_publ)) return -EPIPE; } else { p = list_first_entry(&sr->all_publ, diff --git a/net/tipc/socket.c b/net/tipc/socket.c index 3e63c83e641c56..7545321c3440b5 100644 --- a/net/tipc/socket.c +++ b/net/tipc/socket.c @@ -3749,7 +3749,7 @@ static int __tipc_nl_list_sk_publ(struct sk_buff *skb, if (p->key == *last_publ) break; } - if (p->key != *last_publ) { + if (list_entry_is_head(p, &tsk->publications, binding_sock)) { /* We never set seq or call nl_dump_check_consistent() * this means that setting prev_seq here will cause the * consistence check to fail in the netlink callback From 404ba13a6588d72b3fb9e5c17b73e4725f18c047 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Alvin=20=C5=A0ipraga?= Date: Tue, 22 Feb 2022 17:14:08 +0100 Subject: [PATCH 402/493] MAINTAINERS: add myself as co-maintainer for Realtek DSA switch drivers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Adding myself (Alvin Šipraga) as another maintainer for the Realtek DSA switch drivers. I intend to help Linus out with reviewing and testing changes to these drivers, particularly the rtl8365mb driver which I authored and have hardware access to. Cc: Linus Walleij Signed-off-by: Alvin Šipraga Reviewed-by: Linus Walleij Signed-off-by: David S. Miller --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index b57077b935ba93..0171f3e949fba6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16370,6 +16370,7 @@ F: drivers/watchdog/realtek_otto_wdt.c REALTEK RTL83xx SMI DSA ROUTER CHIPS M: Linus Walleij +M: Alvin Šipraga S: Maintained F: Documentation/devicetree/bindings/net/dsa/realtek-smi.txt F: drivers/net/dsa/realtek-smi* From ecf4a24cf97838fb0b78d4ede0f91d80b058289c Mon Sep 17 00:00:00 2001 From: Wan Jiabing Date: Wed, 23 Feb 2022 10:34:19 +0800 Subject: [PATCH 403/493] net: sched: avoid newline at end of message in NL_SET_ERR_MSG_MOD Fix following coccicheck warning: ./net/sched/act_api.c:277:7-49: WARNING avoid newline at end of message in NL_SET_ERR_MSG_MOD Signed-off-by: Wan Jiabing Signed-off-by: David S. Miller --- net/sched/act_api.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sched/act_api.c b/net/sched/act_api.c index 2811348f3acc0b..ca03e72842541f 100644 --- a/net/sched/act_api.c +++ b/net/sched/act_api.c @@ -274,7 +274,7 @@ static int tcf_action_offload_add_ex(struct tc_action *action, err = tc_setup_action(&fl_action->action, actions); if (err) { NL_SET_ERR_MSG_MOD(extack, - "Failed to setup tc actions for offload\n"); + "Failed to setup tc actions for offload"); goto fl_err; } From 4f1e72850d452e5c3302faa82a01f179ff5f9482 Mon Sep 17 00:00:00 2001 From: Heyi Guo Date: Wed, 23 Feb 2022 11:14:34 +0800 Subject: [PATCH 404/493] drivers/net/ftgmac100: refactor ftgmac100_reset_task to enable direct function call This is to prepare for ftgmac100_adjust_link() to call reset function directly, instead of task schedule. Signed-off-by: Heyi Guo Signed-off-by: David S. Miller --- drivers/net/ethernet/faraday/ftgmac100.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c index 691605c152659b..1f3eb44314753f 100644 --- a/drivers/net/ethernet/faraday/ftgmac100.c +++ b/drivers/net/ethernet/faraday/ftgmac100.c @@ -1410,10 +1410,8 @@ static int ftgmac100_init_all(struct ftgmac100 *priv, bool ignore_alloc_err) return err; } -static void ftgmac100_reset_task(struct work_struct *work) +static void ftgmac100_reset(struct ftgmac100 *priv) { - struct ftgmac100 *priv = container_of(work, struct ftgmac100, - reset_task); struct net_device *netdev = priv->netdev; int err; @@ -1459,6 +1457,14 @@ static void ftgmac100_reset_task(struct work_struct *work) rtnl_unlock(); } +static void ftgmac100_reset_task(struct work_struct *work) +{ + struct ftgmac100 *priv = container_of(work, struct ftgmac100, + reset_task); + + ftgmac100_reset(priv); +} + static int ftgmac100_open(struct net_device *netdev) { struct ftgmac100 *priv = netdev_priv(netdev); From 3c773dba8182cdfea7b32caafe9290240ab8de5f Mon Sep 17 00:00:00 2001 From: Heyi Guo Date: Wed, 23 Feb 2022 11:14:35 +0800 Subject: [PATCH 405/493] drivers/net/ftgmac100: adjust code place for function call dependency This is to prepare for ftgmac100_adjust_link() to call ftgmac100_reset() directly. Only code places are changed. Signed-off-by: Heyi Guo Signed-off-by: David S. Miller --- drivers/net/ethernet/faraday/ftgmac100.c | 222 +++++++++++------------ 1 file changed, 111 insertions(+), 111 deletions(-) diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c index 1f3eb44314753f..c1deb6e5d26c5c 100644 --- a/drivers/net/ethernet/faraday/ftgmac100.c +++ b/drivers/net/ethernet/faraday/ftgmac100.c @@ -989,117 +989,6 @@ static int ftgmac100_alloc_rx_buffers(struct ftgmac100 *priv) return 0; } -static void ftgmac100_adjust_link(struct net_device *netdev) -{ - struct ftgmac100 *priv = netdev_priv(netdev); - struct phy_device *phydev = netdev->phydev; - bool tx_pause, rx_pause; - int new_speed; - - /* We store "no link" as speed 0 */ - if (!phydev->link) - new_speed = 0; - else - new_speed = phydev->speed; - - /* Grab pause settings from PHY if configured to do so */ - if (priv->aneg_pause) { - rx_pause = tx_pause = phydev->pause; - if (phydev->asym_pause) - tx_pause = !rx_pause; - } else { - rx_pause = priv->rx_pause; - tx_pause = priv->tx_pause; - } - - /* Link hasn't changed, do nothing */ - if (phydev->speed == priv->cur_speed && - phydev->duplex == priv->cur_duplex && - rx_pause == priv->rx_pause && - tx_pause == priv->tx_pause) - return; - - /* Print status if we have a link or we had one and just lost it, - * don't print otherwise. - */ - if (new_speed || priv->cur_speed) - phy_print_status(phydev); - - priv->cur_speed = new_speed; - priv->cur_duplex = phydev->duplex; - priv->rx_pause = rx_pause; - priv->tx_pause = tx_pause; - - /* Link is down, do nothing else */ - if (!new_speed) - return; - - /* Disable all interrupts */ - iowrite32(0, priv->base + FTGMAC100_OFFSET_IER); - - /* Reset the adapter asynchronously */ - schedule_work(&priv->reset_task); -} - -static int ftgmac100_mii_probe(struct net_device *netdev) -{ - struct ftgmac100 *priv = netdev_priv(netdev); - struct platform_device *pdev = to_platform_device(priv->dev); - struct device_node *np = pdev->dev.of_node; - struct phy_device *phydev; - phy_interface_t phy_intf; - int err; - - /* Default to RGMII. It's a gigabit part after all */ - err = of_get_phy_mode(np, &phy_intf); - if (err) - phy_intf = PHY_INTERFACE_MODE_RGMII; - - /* Aspeed only supports these. I don't know about other IP - * block vendors so I'm going to just let them through for - * now. Note that this is only a warning if for some obscure - * reason the DT really means to lie about it or it's a newer - * part we don't know about. - * - * On the Aspeed SoC there are additionally straps and SCU - * control bits that could tell us what the interface is - * (or allow us to configure it while the IP block is held - * in reset). For now I chose to keep this driver away from - * those SoC specific bits and assume the device-tree is - * right and the SCU has been configured properly by pinmux - * or the firmware. - */ - if (priv->is_aspeed && !(phy_interface_mode_is_rgmii(phy_intf))) { - netdev_warn(netdev, - "Unsupported PHY mode %s !\n", - phy_modes(phy_intf)); - } - - phydev = phy_find_first(priv->mii_bus); - if (!phydev) { - netdev_info(netdev, "%s: no PHY found\n", netdev->name); - return -ENODEV; - } - - phydev = phy_connect(netdev, phydev_name(phydev), - &ftgmac100_adjust_link, phy_intf); - - if (IS_ERR(phydev)) { - netdev_err(netdev, "%s: Could not attach to PHY\n", netdev->name); - return PTR_ERR(phydev); - } - - /* Indicate that we support PAUSE frames (see comment in - * Documentation/networking/phy.rst) - */ - phy_support_asym_pause(phydev); - - /* Display what we found */ - phy_attached_info(phydev); - - return 0; -} - static int ftgmac100_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum) { struct net_device *netdev = bus->priv; @@ -1465,6 +1354,117 @@ static void ftgmac100_reset_task(struct work_struct *work) ftgmac100_reset(priv); } +static void ftgmac100_adjust_link(struct net_device *netdev) +{ + struct ftgmac100 *priv = netdev_priv(netdev); + struct phy_device *phydev = netdev->phydev; + bool tx_pause, rx_pause; + int new_speed; + + /* We store "no link" as speed 0 */ + if (!phydev->link) + new_speed = 0; + else + new_speed = phydev->speed; + + /* Grab pause settings from PHY if configured to do so */ + if (priv->aneg_pause) { + rx_pause = tx_pause = phydev->pause; + if (phydev->asym_pause) + tx_pause = !rx_pause; + } else { + rx_pause = priv->rx_pause; + tx_pause = priv->tx_pause; + } + + /* Link hasn't changed, do nothing */ + if (phydev->speed == priv->cur_speed && + phydev->duplex == priv->cur_duplex && + rx_pause == priv->rx_pause && + tx_pause == priv->tx_pause) + return; + + /* Print status if we have a link or we had one and just lost it, + * don't print otherwise. + */ + if (new_speed || priv->cur_speed) + phy_print_status(phydev); + + priv->cur_speed = new_speed; + priv->cur_duplex = phydev->duplex; + priv->rx_pause = rx_pause; + priv->tx_pause = tx_pause; + + /* Link is down, do nothing else */ + if (!new_speed) + return; + + /* Disable all interrupts */ + iowrite32(0, priv->base + FTGMAC100_OFFSET_IER); + + /* Reset the adapter asynchronously */ + schedule_work(&priv->reset_task); +} + +static int ftgmac100_mii_probe(struct net_device *netdev) +{ + struct ftgmac100 *priv = netdev_priv(netdev); + struct platform_device *pdev = to_platform_device(priv->dev); + struct device_node *np = pdev->dev.of_node; + struct phy_device *phydev; + phy_interface_t phy_intf; + int err; + + /* Default to RGMII. It's a gigabit part after all */ + err = of_get_phy_mode(np, &phy_intf); + if (err) + phy_intf = PHY_INTERFACE_MODE_RGMII; + + /* Aspeed only supports these. I don't know about other IP + * block vendors so I'm going to just let them through for + * now. Note that this is only a warning if for some obscure + * reason the DT really means to lie about it or it's a newer + * part we don't know about. + * + * On the Aspeed SoC there are additionally straps and SCU + * control bits that could tell us what the interface is + * (or allow us to configure it while the IP block is held + * in reset). For now I chose to keep this driver away from + * those SoC specific bits and assume the device-tree is + * right and the SCU has been configured properly by pinmux + * or the firmware. + */ + if (priv->is_aspeed && !(phy_interface_mode_is_rgmii(phy_intf))) { + netdev_warn(netdev, + "Unsupported PHY mode %s !\n", + phy_modes(phy_intf)); + } + + phydev = phy_find_first(priv->mii_bus); + if (!phydev) { + netdev_info(netdev, "%s: no PHY found\n", netdev->name); + return -ENODEV; + } + + phydev = phy_connect(netdev, phydev_name(phydev), + &ftgmac100_adjust_link, phy_intf); + + if (IS_ERR(phydev)) { + netdev_err(netdev, "%s: Could not attach to PHY\n", netdev->name); + return PTR_ERR(phydev); + } + + /* Indicate that we support PAUSE frames (see comment in + * Documentation/networking/phy.rst) + */ + phy_support_asym_pause(phydev); + + /* Display what we found */ + phy_attached_info(phydev); + + return 0; +} + static int ftgmac100_open(struct net_device *netdev) { struct ftgmac100 *priv = netdev_priv(netdev); From 1baf2e50e48f10f0ea07d53e13381fd0da1546d2 Mon Sep 17 00:00:00 2001 From: Heyi Guo Date: Wed, 23 Feb 2022 11:14:36 +0800 Subject: [PATCH 406/493] drivers/net/ftgmac100: fix DHCP potential failure with systemd DHCP failures were observed with systemd 247.6. The issue could be reproduced by rebooting Aspeed 2600 and then running ifconfig ethX down/up. It is caused by below procedures in the driver: 1. ftgmac100_open() enables net interface and call phy_start() 2. When PHY is link up, it calls netif_carrier_on() and then adjust_link callback 3. ftgmac100_adjust_link() will schedule the reset task 4. ftgmac100_reset_task() will then reset the MAC in another schedule After step 2, systemd will be notified to send DHCP discover packet, while the packet might be corrupted by MAC reset operation in step 4. Call ftgmac100_reset() directly instead of scheduling task to fix the issue. Signed-off-by: Heyi Guo Signed-off-by: David S. Miller --- drivers/net/ethernet/faraday/ftgmac100.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c index c1deb6e5d26c5c..d5356db7539a43 100644 --- a/drivers/net/ethernet/faraday/ftgmac100.c +++ b/drivers/net/ethernet/faraday/ftgmac100.c @@ -1402,8 +1402,17 @@ static void ftgmac100_adjust_link(struct net_device *netdev) /* Disable all interrupts */ iowrite32(0, priv->base + FTGMAC100_OFFSET_IER); - /* Reset the adapter asynchronously */ - schedule_work(&priv->reset_task); + /* Release phy lock to allow ftgmac100_reset to aquire it, keeping lock + * order consistent to prevent dead lock. + */ + if (netdev->phydev) + mutex_unlock(&netdev->phydev->lock); + + ftgmac100_reset(priv); + + if (netdev->phydev) + mutex_lock(&netdev->phydev->lock); + } static int ftgmac100_mii_probe(struct net_device *netdev) From ecbd4912a693b862e25cba0a6990a8c95b00721e Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 3 Feb 2022 12:54:16 +0100 Subject: [PATCH 407/493] drm/edid: Always set RGB444 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In order to fill the drm_display_info structure each time an EDID is read, the code currently will call drm_add_display_info with the parsed EDID. drm_add_display_info will then call drm_reset_display_info to reset all the fields to 0, and then set them to the proper value depending on the EDID. In the color_formats case, we will thus report that we don't support any color format, and then fill it back with RGB444 plus the additional formats described in the EDID Feature Support byte. However, since that byte only contains format-related bits since the 1.4 specification, this doesn't happen if the EDID is following an earlier specification. In turn, it means that for one of these EDID, we end up with color_formats set to 0. The EDID 1.3 specification never really specifies what it means by RGB exactly, but since both HDMI and DVI will use RGB444, it's fairly safe to assume it's supposed to be RGB444. Let's move the addition of RGB444 to color_formats earlier in drm_add_display_info() so that it's always set for a digital display. Fixes: da05a5a71ad8 ("drm: parse color format support for digital displays") Cc: Ville Syrjälä Reported-by: Matthias Reichl Signed-off-by: Maxime Ripard Reviewed-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20220203115416.1137308-1-maxime@cerno.tech --- drivers/gpu/drm/drm_edid.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 12893e7be89bb8..f5f5de362ff2c7 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -5345,6 +5345,7 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edi if (!(edid->input & DRM_EDID_INPUT_DIGITAL)) return quirks; + info->color_formats |= DRM_COLOR_FORMAT_RGB444; drm_parse_cea_ext(connector, edid); /* @@ -5393,7 +5394,6 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edi DRM_DEBUG("%s: Assigning EDID-1.4 digital sink color depth as %d bpc.\n", connector->name, info->bpc); - info->color_formats |= DRM_COLOR_FORMAT_RGB444; if (edid->features & DRM_EDID_FEATURE_RGB_YCRCB444) info->color_formats |= DRM_COLOR_FORMAT_YCRCB444; if (edid->features & DRM_EDID_FEATURE_RGB_YCRCB422) From 363f6368603743072e5f318c668c632bccb097a3 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 16 Feb 2022 15:07:15 +0100 Subject: [PATCH 408/493] nvme: don't return an error from nvme_configure_metadata When a fabrics controller claims to support an invalidate metadata configuration we already warn and disable metadata support. No need to also return an error during revalidation. Signed-off-by: Christoph Hellwig Reviewed-by: Sagi Grimberg Reviewed-by: Daniel Wagner Tested-by: Kanchan Joshi --- drivers/nvme/host/core.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 469f23186159c2..5fc040b279bf4a 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -1723,7 +1723,7 @@ static int nvme_setup_streams_ns(struct nvme_ctrl *ctrl, struct nvme_ns *ns, return 0; } -static int nvme_configure_metadata(struct nvme_ns *ns, struct nvme_id_ns *id) +static void nvme_configure_metadata(struct nvme_ns *ns, struct nvme_id_ns *id) { struct nvme_ctrl *ctrl = ns->ctrl; @@ -1739,7 +1739,8 @@ static int nvme_configure_metadata(struct nvme_ns *ns, struct nvme_id_ns *id) ns->features &= ~(NVME_NS_METADATA_SUPPORTED | NVME_NS_EXT_LBAS); if (!ns->ms || !(ctrl->ops->flags & NVME_F_METADATA_SUPPORTED)) - return 0; + return; + if (ctrl->ops->flags & NVME_F_FABRICS) { /* * The NVMe over Fabrics specification only supports metadata as @@ -1747,7 +1748,7 @@ static int nvme_configure_metadata(struct nvme_ns *ns, struct nvme_id_ns *id) * remap the separate metadata buffer from the block layer. */ if (WARN_ON_ONCE(!(id->flbas & NVME_NS_FLBAS_META_EXT))) - return -EINVAL; + return; ns->features |= NVME_NS_EXT_LBAS; @@ -1774,8 +1775,6 @@ static int nvme_configure_metadata(struct nvme_ns *ns, struct nvme_id_ns *id) else ns->features |= NVME_NS_METADATA_SUPPORTED; } - - return 0; } static void nvme_set_queue_limits(struct nvme_ctrl *ctrl, @@ -1916,9 +1915,7 @@ static int nvme_update_ns_info(struct nvme_ns *ns, struct nvme_id_ns *id) ns->lba_shift = id->lbaf[lbaf].ds; nvme_set_queue_limits(ns->ctrl, ns->queue); - ret = nvme_configure_metadata(ns, id); - if (ret) - goto out_unfreeze; + nvme_configure_metadata(ns, id); nvme_set_chunk_sectors(ns, id); nvme_update_disk_info(ns->disk, ns, id); From 602e57c9799c19f27e440639deed3ec45cfe1651 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 16 Feb 2022 14:14:58 +0100 Subject: [PATCH 409/493] nvme: also mark passthrough-only namespaces ready in nvme_update_ns_info Commit e7d65803e2bb ("nvme-multipath: revalidate paths during rescan") introduced the NVME_NS_READY flag, which nvme_path_is_disabled() uses to check if a path can be used or not. We also need to set this flag for devices that fail the ZNS feature validation and which are available through passthrough devices only to that they can be used in multipathing setups. Fixes: e7d65803e2bb ("nvme-multipath: revalidate paths during rescan") Reported-by: Kanchan Joshi Signed-off-by: Christoph Hellwig Reviewed-by: Sagi Grimberg Reviewed-by: Daniel Wagner Tested-by: Kanchan Joshi --- drivers/nvme/host/core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 5fc040b279bf4a..fd4720d37cc0bf 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -1931,7 +1931,7 @@ static int nvme_update_ns_info(struct nvme_ns *ns, struct nvme_id_ns *id) if (blk_queue_is_zoned(ns->queue)) { ret = nvme_revalidate_zones(ns); if (ret && !nvme_first_scan(ns->disk)) - goto out; + return ret; } if (nvme_ns_head_multipath(ns->head)) { @@ -1946,16 +1946,16 @@ static int nvme_update_ns_info(struct nvme_ns *ns, struct nvme_id_ns *id) return 0; out_unfreeze: - blk_mq_unfreeze_queue(ns->disk->queue); -out: /* * If probing fails due an unsupported feature, hide the block device, * but still allow other access. */ if (ret == -ENODEV) { ns->disk->flags |= GENHD_FL_HIDDEN; + set_bit(NVME_NS_READY, &ns->flags); ret = 0; } + blk_mq_unfreeze_queue(ns->disk->queue); return ret; } From c2700d2886a87f83f31e0a301de1d2350b52c79b Mon Sep 17 00:00:00 2001 From: Varun Prakash Date: Sat, 22 Jan 2022 22:27:44 +0530 Subject: [PATCH 410/493] nvme-tcp: send H2CData PDUs based on MAXH2CDATA As per NVMe/TCP specification (revision 1.0a, section 3.6.2.3) Maximum Host to Controller Data length (MAXH2CDATA): Specifies the maximum number of PDU-Data bytes per H2CData PDU in bytes. This value is a multiple of dwords and should be no less than 4,096. Current code sets H2CData PDU data_length to r2t_length, it does not check MAXH2CDATA value. Fix this by setting H2CData PDU data_length to min(req->h2cdata_left, queue->maxh2cdata). Also validate MAXH2CDATA value returned by target in ICResp PDU, if it is not a multiple of dword or if it is less than 4096 return -EINVAL from nvme_tcp_init_connection(). Signed-off-by: Varun Prakash Reviewed-by: Sagi Grimberg Signed-off-by: Christoph Hellwig --- drivers/nvme/host/tcp.c | 63 +++++++++++++++++++++++++++++++--------- include/linux/nvme-tcp.h | 1 + 2 files changed, 50 insertions(+), 14 deletions(-) diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c index 891a36d02e7c71..65e00c64a588b7 100644 --- a/drivers/nvme/host/tcp.c +++ b/drivers/nvme/host/tcp.c @@ -44,6 +44,8 @@ struct nvme_tcp_request { u32 data_len; u32 pdu_len; u32 pdu_sent; + u32 h2cdata_left; + u32 h2cdata_offset; u16 ttag; __le16 status; struct list_head entry; @@ -95,6 +97,7 @@ struct nvme_tcp_queue { struct nvme_tcp_request *request; int queue_size; + u32 maxh2cdata; size_t cmnd_capsule_len; struct nvme_tcp_ctrl *ctrl; unsigned long flags; @@ -572,23 +575,26 @@ static int nvme_tcp_handle_comp(struct nvme_tcp_queue *queue, return ret; } -static void nvme_tcp_setup_h2c_data_pdu(struct nvme_tcp_request *req, - struct nvme_tcp_r2t_pdu *pdu) +static void nvme_tcp_setup_h2c_data_pdu(struct nvme_tcp_request *req) { struct nvme_tcp_data_pdu *data = req->pdu; struct nvme_tcp_queue *queue = req->queue; struct request *rq = blk_mq_rq_from_pdu(req); + u32 h2cdata_sent = req->pdu_len; u8 hdgst = nvme_tcp_hdgst_len(queue); u8 ddgst = nvme_tcp_ddgst_len(queue); req->state = NVME_TCP_SEND_H2C_PDU; req->offset = 0; - req->pdu_len = le32_to_cpu(pdu->r2t_length); + req->pdu_len = min(req->h2cdata_left, queue->maxh2cdata); req->pdu_sent = 0; + req->h2cdata_left -= req->pdu_len; + req->h2cdata_offset += h2cdata_sent; memset(data, 0, sizeof(*data)); data->hdr.type = nvme_tcp_h2c_data; - data->hdr.flags = NVME_TCP_F_DATA_LAST; + if (!req->h2cdata_left) + data->hdr.flags = NVME_TCP_F_DATA_LAST; if (queue->hdr_digest) data->hdr.flags |= NVME_TCP_F_HDGST; if (queue->data_digest) @@ -597,9 +603,9 @@ static void nvme_tcp_setup_h2c_data_pdu(struct nvme_tcp_request *req, data->hdr.pdo = data->hdr.hlen + hdgst; data->hdr.plen = cpu_to_le32(data->hdr.hlen + hdgst + req->pdu_len + ddgst); - data->ttag = pdu->ttag; + data->ttag = req->ttag; data->command_id = nvme_cid(rq); - data->data_offset = pdu->r2t_offset; + data->data_offset = cpu_to_le32(req->h2cdata_offset); data->data_length = cpu_to_le32(req->pdu_len); } @@ -609,6 +615,7 @@ static int nvme_tcp_handle_r2t(struct nvme_tcp_queue *queue, struct nvme_tcp_request *req; struct request *rq; u32 r2t_length = le32_to_cpu(pdu->r2t_length); + u32 r2t_offset = le32_to_cpu(pdu->r2t_offset); rq = nvme_find_rq(nvme_tcp_tagset(queue), pdu->command_id); if (!rq) { @@ -633,14 +640,19 @@ static int nvme_tcp_handle_r2t(struct nvme_tcp_queue *queue, return -EPROTO; } - if (unlikely(le32_to_cpu(pdu->r2t_offset) < req->data_sent)) { + if (unlikely(r2t_offset < req->data_sent)) { dev_err(queue->ctrl->ctrl.device, "req %d unexpected r2t offset %u (expected %zu)\n", - rq->tag, le32_to_cpu(pdu->r2t_offset), req->data_sent); + rq->tag, r2t_offset, req->data_sent); return -EPROTO; } - nvme_tcp_setup_h2c_data_pdu(req, pdu); + req->pdu_len = 0; + req->h2cdata_left = r2t_length; + req->h2cdata_offset = r2t_offset; + req->ttag = pdu->ttag; + + nvme_tcp_setup_h2c_data_pdu(req); nvme_tcp_queue_request(req, false, true); return 0; @@ -928,6 +940,7 @@ static int nvme_tcp_try_send_data(struct nvme_tcp_request *req) { struct nvme_tcp_queue *queue = req->queue; int req_data_len = req->data_len; + u32 h2cdata_left = req->h2cdata_left; while (true) { struct page *page = nvme_tcp_req_cur_page(req); @@ -972,7 +985,10 @@ static int nvme_tcp_try_send_data(struct nvme_tcp_request *req) req->state = NVME_TCP_SEND_DDGST; req->offset = 0; } else { - nvme_tcp_done_send_req(queue); + if (h2cdata_left) + nvme_tcp_setup_h2c_data_pdu(req); + else + nvme_tcp_done_send_req(queue); } return 1; } @@ -1030,9 +1046,14 @@ static int nvme_tcp_try_send_data_pdu(struct nvme_tcp_request *req) if (queue->hdr_digest && !req->offset) nvme_tcp_hdgst(queue->snd_hash, pdu, sizeof(*pdu)); - ret = kernel_sendpage(queue->sock, virt_to_page(pdu), - offset_in_page(pdu) + req->offset, len, - MSG_DONTWAIT | MSG_MORE | MSG_SENDPAGE_NOTLAST); + if (!req->h2cdata_left) + ret = kernel_sendpage(queue->sock, virt_to_page(pdu), + offset_in_page(pdu) + req->offset, len, + MSG_DONTWAIT | MSG_MORE | MSG_SENDPAGE_NOTLAST); + else + ret = sock_no_sendpage(queue->sock, virt_to_page(pdu), + offset_in_page(pdu) + req->offset, len, + MSG_DONTWAIT | MSG_MORE); if (unlikely(ret <= 0)) return ret; @@ -1052,6 +1073,7 @@ static int nvme_tcp_try_send_ddgst(struct nvme_tcp_request *req) { struct nvme_tcp_queue *queue = req->queue; size_t offset = req->offset; + u32 h2cdata_left = req->h2cdata_left; int ret; struct msghdr msg = { .msg_flags = MSG_DONTWAIT }; struct kvec iov = { @@ -1069,7 +1091,10 @@ static int nvme_tcp_try_send_ddgst(struct nvme_tcp_request *req) return ret; if (offset + ret == NVME_TCP_DIGEST_LENGTH) { - nvme_tcp_done_send_req(queue); + if (h2cdata_left) + nvme_tcp_setup_h2c_data_pdu(req); + else + nvme_tcp_done_send_req(queue); return 1; } @@ -1261,6 +1286,7 @@ static int nvme_tcp_init_connection(struct nvme_tcp_queue *queue) struct msghdr msg = {}; struct kvec iov; bool ctrl_hdgst, ctrl_ddgst; + u32 maxh2cdata; int ret; icreq = kzalloc(sizeof(*icreq), GFP_KERNEL); @@ -1344,6 +1370,14 @@ static int nvme_tcp_init_connection(struct nvme_tcp_queue *queue) goto free_icresp; } + maxh2cdata = le32_to_cpu(icresp->maxdata); + if ((maxh2cdata % 4) || (maxh2cdata < NVME_TCP_MIN_MAXH2CDATA)) { + pr_err("queue %d: invalid maxh2cdata returned %u\n", + nvme_tcp_queue_id(queue), maxh2cdata); + goto free_icresp; + } + queue->maxh2cdata = maxh2cdata; + ret = 0; free_icresp: kfree(icresp); @@ -2329,6 +2363,7 @@ static blk_status_t nvme_tcp_setup_cmd_pdu(struct nvme_ns *ns, req->data_sent = 0; req->pdu_len = 0; req->pdu_sent = 0; + req->h2cdata_left = 0; req->data_len = blk_rq_nr_phys_segments(rq) ? blk_rq_payload_bytes(rq) : 0; req->curr_bio = rq->bio; diff --git a/include/linux/nvme-tcp.h b/include/linux/nvme-tcp.h index 959e0bd9a913ed..75470159a194d9 100644 --- a/include/linux/nvme-tcp.h +++ b/include/linux/nvme-tcp.h @@ -12,6 +12,7 @@ #define NVME_TCP_DISC_PORT 8009 #define NVME_TCP_ADMIN_CCSZ SZ_8K #define NVME_TCP_DIGEST_LENGTH 4 +#define NVME_TCP_MIN_MAXH2CDATA 4096 enum nvme_tcp_pfv { NVME_TCP_PFV_1_0 = 0x0, From 7093f15291e95f16dfb5a93307eda3272bfe1108 Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Fri, 28 Jan 2022 15:21:20 +0800 Subject: [PATCH 411/493] btrfs: defrag: don't try to merge regular extents with preallocated extents [BUG] With older kernels (before v5.16), btrfs will defrag preallocated extents. While with newer kernels (v5.16 and newer) btrfs will not defrag preallocated extents, but it will defrag the extent just before the preallocated extent, even it's just a single sector. This can be exposed by the following small script: mkfs.btrfs -f $dev > /dev/null mount $dev $mnt xfs_io -f -c "pwrite 0 4k" -c sync -c "falloc 4k 16K" $mnt/file xfs_io -c "fiemap -v" $mnt/file btrfs fi defrag $mnt/file sync xfs_io -c "fiemap -v" $mnt/file The output looks like this on older kernels: /mnt/btrfs/file: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..7]: 26624..26631 8 0x0 1: [8..39]: 26632..26663 32 0x801 /mnt/btrfs/file: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..39]: 26664..26703 40 0x1 Which defrags the single sector along with the preallocated extent, and replace them with an regular extent into a new location (caused by data COW). This wastes most of the data IO just for the preallocated range. On the other hand, v5.16 is slightly better: /mnt/btrfs/file: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..7]: 26624..26631 8 0x0 1: [8..39]: 26632..26663 32 0x801 /mnt/btrfs/file: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..7]: 26664..26671 8 0x0 1: [8..39]: 26632..26663 32 0x801 The preallocated range is not defragged, but the sector before it still gets defragged, which has no need for it. [CAUSE] One of the function reused by the old and new behavior is defrag_check_next_extent(), it will determine if we should defrag current extent by checking the next one. It only checks if the next extent is a hole or inlined, but it doesn't check if it's preallocated. On the other hand, out of the function, both old and new kernel will reject preallocated extents. Such inconsistent behavior causes above behavior. [FIX] - Also check if next extent is preallocated If so, don't defrag current extent. - Add comments for each branch why we reject the extent This will reduce the IO caused by defrag ioctl and autodefrag. CC: stable@vger.kernel.org # 5.16 Reviewed-by: Filipe Manana Signed-off-by: Qu Wenruo Signed-off-by: David Sterba --- fs/btrfs/ioctl.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 218724e4edd684..1c36e437b027b5 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1050,19 +1050,24 @@ static bool defrag_check_next_extent(struct inode *inode, struct extent_map *em, bool locked) { struct extent_map *next; - bool ret = true; + bool ret = false; /* this is the last extent */ if (em->start + em->len >= i_size_read(inode)) return false; next = defrag_lookup_extent(inode, em->start + em->len, locked); + /* No more em or hole */ if (!next || next->block_start >= EXTENT_MAP_LAST_BYTE) - ret = false; - else if ((em->block_start + em->block_len == next->block_start) && - (em->block_len > SZ_128K && next->block_len > SZ_128K)) - ret = false; - + goto out; + if (test_bit(EXTENT_FLAG_PREALLOC, &next->flags)) + goto out; + /* Physically adjacent and large enough */ + if ((em->block_start + em->block_len == next->block_start) && + (em->block_len > SZ_128K && next->block_len > SZ_128K)) + goto out; + ret = true; +out: free_extent_map(next); return ret; } From 979b25c300dbcbcb750e88715018e04e854de6c6 Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Fri, 28 Jan 2022 15:21:21 +0800 Subject: [PATCH 412/493] btrfs: defrag: don't defrag extents which are already at max capacity [BUG] For compressed extents, defrag ioctl will always try to defrag any compressed extents, wasting not only IO but also CPU time to compress/decompress: mkfs.btrfs -f $DEV mount -o compress $DEV $MNT xfs_io -f -c "pwrite -S 0xab 0 128K" $MNT/foobar sync xfs_io -f -c "pwrite -S 0xcd 128K 128K" $MNT/foobar sync echo "=== before ===" xfs_io -c "fiemap -v" $MNT/foobar btrfs filesystem defrag $MNT/foobar sync echo "=== after ===" xfs_io -c "fiemap -v" $MNT/foobar Then it shows the 2 128K extents just get COW for no extra benefit, with extra IO/CPU spent: === before === /mnt/btrfs/file1: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..255]: 26624..26879 256 0x8 1: [256..511]: 26632..26887 256 0x9 === after === /mnt/btrfs/file1: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..255]: 26640..26895 256 0x8 1: [256..511]: 26648..26903 256 0x9 This affects not only v5.16 (after the defrag rework), but also v5.15 (before the defrag rework). [CAUSE] From the very beginning, btrfs defrag never checks if one extent is already at its max capacity (128K for compressed extents, 128M otherwise). And the default extent size threshold is 256K, which is already beyond the compressed extent max size. This means, by default btrfs defrag ioctl will mark all compressed extent which is not adjacent to a hole/preallocated range for defrag. [FIX] Introduce a helper to grab the maximum extent size, and then in defrag_collect_targets() and defrag_check_next_extent(), reject extents which are already at their max capacity. Reported-by: Filipe Manana CC: stable@vger.kernel.org # 5.16 Reviewed-by: Filipe Manana Signed-off-by: Qu Wenruo Signed-off-by: David Sterba --- fs/btrfs/ioctl.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 1c36e437b027b5..8e1589dd1c70c1 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1046,6 +1046,13 @@ static struct extent_map *defrag_lookup_extent(struct inode *inode, u64 start, return em; } +static u32 get_extent_max_capacity(const struct extent_map *em) +{ + if (test_bit(EXTENT_FLAG_COMPRESSED, &em->flags)) + return BTRFS_MAX_COMPRESSED; + return BTRFS_MAX_EXTENT_SIZE; +} + static bool defrag_check_next_extent(struct inode *inode, struct extent_map *em, bool locked) { @@ -1062,6 +1069,12 @@ static bool defrag_check_next_extent(struct inode *inode, struct extent_map *em, goto out; if (test_bit(EXTENT_FLAG_PREALLOC, &next->flags)) goto out; + /* + * If the next extent is at its max capacity, defragging current extent + * makes no sense, as the total number of extents won't change. + */ + if (next->len >= get_extent_max_capacity(em)) + goto out; /* Physically adjacent and large enough */ if ((em->block_start + em->block_len == next->block_start) && (em->block_len > SZ_128K && next->block_len > SZ_128K)) @@ -1262,6 +1275,13 @@ static int defrag_collect_targets(struct btrfs_inode *inode, if (range_len >= extent_thresh) goto next; + /* + * Skip extents already at its max capacity, this is mostly for + * compressed extents, which max cap is only 128K. + */ + if (em->len >= get_extent_max_capacity(em)) + goto next; + next_mergeable = defrag_check_next_extent(&inode->vfs_inode, em, locked); if (!next_mergeable) { From 550f133f6959db927127111b50e483da3a7ce662 Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Fri, 28 Jan 2022 15:21:22 +0800 Subject: [PATCH 413/493] btrfs: defrag: remove an ambiguous condition for rejection From the very beginning of btrfs defrag, there is a check to reject extents which meet both conditions: - Physically adjacent We may want to defrag physically adjacent extents to reduce the number of extents or the size of subvolume tree. - Larger than 128K This may be there for compressed extents, but unfortunately 128K is exactly the max capacity for compressed extents. And the check is > 128K, thus it never rejects compressed extents. Furthermore, the compressed extent capacity bug is fixed by previous patch, there is no reason for that check anymore. The original check has a very small ranges to reject (the target extent size is > 128K, and default extent threshold is 256K), and for compressed extent it doesn't work at all. So it's better just to remove the rejection, and allow us to defrag physically adjacent extents. CC: stable@vger.kernel.org # 5.16 Reviewed-by: Filipe Manana Signed-off-by: Qu Wenruo Signed-off-by: David Sterba --- fs/btrfs/ioctl.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 8e1589dd1c70c1..212157473ad886 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1075,10 +1075,6 @@ static bool defrag_check_next_extent(struct inode *inode, struct extent_map *em, */ if (next->len >= get_extent_max_capacity(em)) goto out; - /* Physically adjacent and large enough */ - if ((em->block_start + em->block_len == next->block_start) && - (em->block_len > SZ_128K && next->block_len > SZ_128K)) - goto out; ret = true; out: free_extent_map(next); From d5633b0dee02d7d25e93463a03709f11c71500e2 Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Fri, 11 Feb 2022 14:46:12 +0800 Subject: [PATCH 414/493] btrfs: defrag: bring back the old file extent search behavior For defrag, we don't really want to use btrfs_get_extent() to iterate all extent maps of an inode. The reasons are: - btrfs_get_extent() can merge extent maps And the result em has the higher generation of the two, causing defrag to mark unnecessary part of such merged large extent map. This in fact can result extra IO for autodefrag in v5.16+ kernels. However this patch is not going to completely solve the problem, as one can still using read() to trigger extent map reading, and got them merged. The completely solution for the extent map merging generation problem will come as an standalone fix. - btrfs_get_extent() caches the extent map result Normally it's fine, but for defrag the target range may not get another read/write for a long long time. Such cache would only increase the memory usage. - btrfs_get_extent() doesn't skip older extent map Unlike the old find_new_extent() which uses btrfs_search_forward() to skip the older subtree, thus it will pick up unnecessary extent maps. This patch will fix the regression by introducing defrag_get_extent() to replace the btrfs_get_extent() call. This helper will: - Not cache the file extent we found It will search the file extent and manually convert it to em. - Use btrfs_search_forward() to skip entire ranges which is modified in the past This should reduce the IO for autodefrag. Reported-by: Filipe Manana Fixes: 7b508037d4ca ("btrfs: defrag: use defrag_one_cluster() to implement btrfs_defrag_file()") Reviewed-by: Filipe Manana Signed-off-by: Qu Wenruo Signed-off-by: David Sterba --- fs/btrfs/ioctl.c | 161 +++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 157 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 212157473ad886..ffebd420829e8f 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1012,8 +1012,155 @@ static noinline int btrfs_mksnapshot(const struct path *parent, return ret; } +/* + * Defrag specific helper to get an extent map. + * + * Differences between this and btrfs_get_extent() are: + * + * - No extent_map will be added to inode->extent_tree + * To reduce memory usage in the long run. + * + * - Extra optimization to skip file extents older than @newer_than + * By using btrfs_search_forward() we can skip entire file ranges that + * have extents created in past transactions, because btrfs_search_forward() + * will not visit leaves and nodes with a generation smaller than given + * minimal generation threshold (@newer_than). + * + * Return valid em if we find a file extent matching the requirement. + * Return NULL if we can not find a file extent matching the requirement. + * + * Return ERR_PTR() for error. + */ +static struct extent_map *defrag_get_extent(struct btrfs_inode *inode, + u64 start, u64 newer_than) +{ + struct btrfs_root *root = inode->root; + struct btrfs_file_extent_item *fi; + struct btrfs_path path = { 0 }; + struct extent_map *em; + struct btrfs_key key; + u64 ino = btrfs_ino(inode); + int ret; + + em = alloc_extent_map(); + if (!em) { + ret = -ENOMEM; + goto err; + } + + key.objectid = ino; + key.type = BTRFS_EXTENT_DATA_KEY; + key.offset = start; + + if (newer_than) { + ret = btrfs_search_forward(root, &key, &path, newer_than); + if (ret < 0) + goto err; + /* Can't find anything newer */ + if (ret > 0) + goto not_found; + } else { + ret = btrfs_search_slot(NULL, root, &key, &path, 0, 0); + if (ret < 0) + goto err; + } + if (path.slots[0] >= btrfs_header_nritems(path.nodes[0])) { + /* + * If btrfs_search_slot() makes path to point beyond nritems, + * we should not have an empty leaf, as this inode must at + * least have its INODE_ITEM. + */ + ASSERT(btrfs_header_nritems(path.nodes[0])); + path.slots[0] = btrfs_header_nritems(path.nodes[0]) - 1; + } + btrfs_item_key_to_cpu(path.nodes[0], &key, path.slots[0]); + /* Perfect match, no need to go one slot back */ + if (key.objectid == ino && key.type == BTRFS_EXTENT_DATA_KEY && + key.offset == start) + goto iterate; + + /* We didn't find a perfect match, needs to go one slot back */ + if (path.slots[0] > 0) { + btrfs_item_key_to_cpu(path.nodes[0], &key, path.slots[0]); + if (key.objectid == ino && key.type == BTRFS_EXTENT_DATA_KEY) + path.slots[0]--; + } + +iterate: + /* Iterate through the path to find a file extent covering @start */ + while (true) { + u64 extent_end; + + if (path.slots[0] >= btrfs_header_nritems(path.nodes[0])) + goto next; + + btrfs_item_key_to_cpu(path.nodes[0], &key, path.slots[0]); + + /* + * We may go one slot back to INODE_REF/XATTR item, then + * need to go forward until we reach an EXTENT_DATA. + * But we should still has the correct ino as key.objectid. + */ + if (WARN_ON(key.objectid < ino) || key.type < BTRFS_EXTENT_DATA_KEY) + goto next; + + /* It's beyond our target range, definitely not extent found */ + if (key.objectid > ino || key.type > BTRFS_EXTENT_DATA_KEY) + goto not_found; + + /* + * | |<- File extent ->| + * \- start + * + * This means there is a hole between start and key.offset. + */ + if (key.offset > start) { + em->start = start; + em->orig_start = start; + em->block_start = EXTENT_MAP_HOLE; + em->len = key.offset - start; + break; + } + + fi = btrfs_item_ptr(path.nodes[0], path.slots[0], + struct btrfs_file_extent_item); + extent_end = btrfs_file_extent_end(&path); + + /* + * |<- file extent ->| | + * \- start + * + * We haven't reached start, search next slot. + */ + if (extent_end <= start) + goto next; + + /* Now this extent covers @start, convert it to em */ + btrfs_extent_item_to_extent_map(inode, &path, fi, false, em); + break; +next: + ret = btrfs_next_item(root, &path); + if (ret < 0) + goto err; + if (ret > 0) + goto not_found; + } + btrfs_release_path(&path); + return em; + +not_found: + btrfs_release_path(&path); + free_extent_map(em); + return NULL; + +err: + btrfs_release_path(&path); + free_extent_map(em); + return ERR_PTR(ret); +} + static struct extent_map *defrag_lookup_extent(struct inode *inode, u64 start, - bool locked) + u64 newer_than, bool locked) { struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree; struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree; @@ -1035,7 +1182,7 @@ static struct extent_map *defrag_lookup_extent(struct inode *inode, u64 start, /* get the big lock and read metadata off disk */ if (!locked) lock_extent_bits(io_tree, start, end, &cached); - em = btrfs_get_extent(BTRFS_I(inode), NULL, 0, start, sectorsize); + em = defrag_get_extent(BTRFS_I(inode), start, newer_than); if (!locked) unlock_extent_cached(io_tree, start, end, &cached); @@ -1063,7 +1210,12 @@ static bool defrag_check_next_extent(struct inode *inode, struct extent_map *em, if (em->start + em->len >= i_size_read(inode)) return false; - next = defrag_lookup_extent(inode, em->start + em->len, locked); + /* + * We want to check if the next extent can be merged with the current + * one, which can be an extent created in a past generation, so we pass + * a minimum generation of 0 to defrag_lookup_extent(). + */ + next = defrag_lookup_extent(inode, em->start + em->len, 0, locked); /* No more em or hole */ if (!next || next->block_start >= EXTENT_MAP_LAST_BYTE) goto out; @@ -1214,7 +1366,8 @@ static int defrag_collect_targets(struct btrfs_inode *inode, u64 range_len; last_is_target = false; - em = defrag_lookup_extent(&inode->vfs_inode, cur, locked); + em = defrag_lookup_extent(&inode->vfs_inode, cur, + newer_than, locked); if (!em) break; From 199257a78bb01341c3ba6e85bdcf3a2e6e452c6d Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Fri, 11 Feb 2022 14:46:13 +0800 Subject: [PATCH 415/493] btrfs: defrag: don't use merged extent map for their generation check For extent maps, if they are not compressed extents and are adjacent by logical addresses and file offsets, they can be merged into one larger extent map. Such merged extent map will have the higher generation of all the original ones. But this brings a problem for autodefrag, as it relies on accurate extent_map::generation to determine if one extent should be defragged. For merged extent maps, their higher generation can mark some older extents to be defragged while the original extent map doesn't meet the minimal generation threshold. Thus this will cause extra IO. So solve the problem, here we introduce a new flag, EXTENT_FLAG_MERGED, to indicate if the extent map is merged from one or more ems. And for autodefrag, if we find a merged extent map, and its generation meets the generation requirement, we just don't use this one, and go back to defrag_get_extent() to read extent maps from subvolume trees. This could cause more read IO, but should result less defrag data write, so in the long run it should be a win for autodefrag. Reviewed-by: Filipe Manana Signed-off-by: Qu Wenruo Signed-off-by: David Sterba --- fs/btrfs/extent_map.c | 2 ++ fs/btrfs/extent_map.h | 8 ++++++++ fs/btrfs/ioctl.c | 14 ++++++++++++++ 3 files changed, 24 insertions(+) diff --git a/fs/btrfs/extent_map.c b/fs/btrfs/extent_map.c index 5a36add213053f..c28ceddefae420 100644 --- a/fs/btrfs/extent_map.c +++ b/fs/btrfs/extent_map.c @@ -261,6 +261,7 @@ static void try_merge_map(struct extent_map_tree *tree, struct extent_map *em) em->mod_len = (em->mod_len + em->mod_start) - merge->mod_start; em->mod_start = merge->mod_start; em->generation = max(em->generation, merge->generation); + set_bit(EXTENT_FLAG_MERGED, &em->flags); rb_erase_cached(&merge->rb_node, &tree->map); RB_CLEAR_NODE(&merge->rb_node); @@ -278,6 +279,7 @@ static void try_merge_map(struct extent_map_tree *tree, struct extent_map *em) RB_CLEAR_NODE(&merge->rb_node); em->mod_len = (merge->mod_start + merge->mod_len) - em->mod_start; em->generation = max(em->generation, merge->generation); + set_bit(EXTENT_FLAG_MERGED, &em->flags); free_extent_map(merge); } } diff --git a/fs/btrfs/extent_map.h b/fs/btrfs/extent_map.h index 8e217337dff901..d2fa32ffe30455 100644 --- a/fs/btrfs/extent_map.h +++ b/fs/btrfs/extent_map.h @@ -25,6 +25,8 @@ enum { EXTENT_FLAG_FILLING, /* filesystem extent mapping type */ EXTENT_FLAG_FS_MAPPING, + /* This em is merged from two or more physically adjacent ems */ + EXTENT_FLAG_MERGED, }; struct extent_map { @@ -40,6 +42,12 @@ struct extent_map { u64 ram_bytes; u64 block_start; u64 block_len; + + /* + * Generation of the extent map, for merged em it's the highest + * generation of all merged ems. + * For non-merged extents, it's from btrfs_file_extent_item::generation. + */ u64 generation; unsigned long flags; /* Used for chunk mappings, flag EXTENT_FLAG_FS_MAPPING must be set */ diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index ffebd420829e8f..1398d7b64c4ea9 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1175,6 +1175,20 @@ static struct extent_map *defrag_lookup_extent(struct inode *inode, u64 start, em = lookup_extent_mapping(em_tree, start, sectorsize); read_unlock(&em_tree->lock); + /* + * We can get a merged extent, in that case, we need to re-search + * tree to get the original em for defrag. + * + * If @newer_than is 0 or em::generation < newer_than, we can trust + * this em, as either we don't care about the generation, or the + * merged extent map will be rejected anyway. + */ + if (em && test_bit(EXTENT_FLAG_MERGED, &em->flags) && + newer_than && em->generation >= newer_than) { + free_extent_map(em); + em = NULL; + } + if (!em) { struct extent_state *cached = NULL; u64 end = start + sectorsize - 1; From 26fbac2517fcad34fa3f950151fd4c0240fb2935 Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Tue, 22 Feb 2022 18:20:59 +0100 Subject: [PATCH 416/493] btrfs: autodefrag: only scan one inode once Although we have btrfs_requeue_inode_defrag(), for autodefrag we are still just exhausting all inode_defrag items in the tree. This means, it doesn't make much difference to requeue an inode_defrag, other than scan the inode from the beginning till its end. Change the behaviour to always scan from offset 0 of an inode, and till the end. By this we get the following benefit: - Straight-forward code - No more re-queue related check - Fewer members in inode_defrag We still keep the same btrfs_get_fs_root() and btrfs_iget() check for each loop, and added extra should_auto_defrag() check per-loop. Note: the patch needs to be backported and is intentionally written to minimize the diff size, code will be cleaned up later. CC: stable@vger.kernel.org # 5.16 Signed-off-by: Qu Wenruo Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/file.c | 84 +++++++++++++------------------------------------ 1 file changed, 22 insertions(+), 62 deletions(-) diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 11204dbbe05304..36a81368ed46d4 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -49,12 +49,6 @@ struct inode_defrag { /* root objectid */ u64 root; - - /* last offset we were able to defrag */ - u64 last_offset; - - /* if we've wrapped around back to zero once already */ - int cycled; }; static int __compare_inode_defrag(struct inode_defrag *defrag1, @@ -107,8 +101,6 @@ static int __btrfs_add_inode_defrag(struct btrfs_inode *inode, */ if (defrag->transid < entry->transid) entry->transid = defrag->transid; - if (defrag->last_offset > entry->last_offset) - entry->last_offset = defrag->last_offset; return -EEXIST; } } @@ -178,34 +170,6 @@ int btrfs_add_inode_defrag(struct btrfs_trans_handle *trans, return 0; } -/* - * Requeue the defrag object. If there is a defrag object that points to - * the same inode in the tree, we will merge them together (by - * __btrfs_add_inode_defrag()) and free the one that we want to requeue. - */ -static void btrfs_requeue_inode_defrag(struct btrfs_inode *inode, - struct inode_defrag *defrag) -{ - struct btrfs_fs_info *fs_info = inode->root->fs_info; - int ret; - - if (!__need_auto_defrag(fs_info)) - goto out; - - /* - * Here we don't check the IN_DEFRAG flag, because we need merge - * them together. - */ - spin_lock(&fs_info->defrag_inodes_lock); - ret = __btrfs_add_inode_defrag(inode, defrag); - spin_unlock(&fs_info->defrag_inodes_lock); - if (ret) - goto out; - return; -out: - kmem_cache_free(btrfs_inode_defrag_cachep, defrag); -} - /* * pick the defragable inode that we want, if it doesn't exist, we will get * the next one. @@ -278,8 +242,14 @@ static int __btrfs_run_defrag_inode(struct btrfs_fs_info *fs_info, struct btrfs_root *inode_root; struct inode *inode; struct btrfs_ioctl_defrag_range_args range; - int num_defrag; - int ret; + int ret = 0; + u64 cur = 0; + +again: + if (test_bit(BTRFS_FS_STATE_REMOUNTING, &fs_info->fs_state)) + goto cleanup; + if (!__need_auto_defrag(fs_info)) + goto cleanup; /* get the inode */ inode_root = btrfs_get_fs_root(fs_info, defrag->root, true); @@ -295,39 +265,29 @@ static int __btrfs_run_defrag_inode(struct btrfs_fs_info *fs_info, goto cleanup; } + if (cur >= i_size_read(inode)) { + iput(inode); + goto cleanup; + } + /* do a chunk of defrag */ clear_bit(BTRFS_INODE_IN_DEFRAG, &BTRFS_I(inode)->runtime_flags); memset(&range, 0, sizeof(range)); range.len = (u64)-1; - range.start = defrag->last_offset; + range.start = cur; sb_start_write(fs_info->sb); - num_defrag = btrfs_defrag_file(inode, NULL, &range, defrag->transid, + ret = btrfs_defrag_file(inode, NULL, &range, defrag->transid, BTRFS_DEFRAG_BATCH); sb_end_write(fs_info->sb); - /* - * if we filled the whole defrag batch, there - * must be more work to do. Queue this defrag - * again - */ - if (num_defrag == BTRFS_DEFRAG_BATCH) { - defrag->last_offset = range.start; - btrfs_requeue_inode_defrag(BTRFS_I(inode), defrag); - } else if (defrag->last_offset && !defrag->cycled) { - /* - * we didn't fill our defrag batch, but - * we didn't start at zero. Make sure we loop - * around to the start of the file. - */ - defrag->last_offset = 0; - defrag->cycled = 1; - btrfs_requeue_inode_defrag(BTRFS_I(inode), defrag); - } else { - kmem_cache_free(btrfs_inode_defrag_cachep, defrag); - } - iput(inode); - return 0; + + if (ret < 0) + goto cleanup; + + cur = max(cur + fs_info->sectorsize, range.start); + goto again; + cleanup: kmem_cache_free(btrfs_inode_defrag_cachep, defrag); return ret; From dd2288f4a020d693360e3e8d72f8b9d9c25f5ef6 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Fri, 18 Feb 2022 09:25:20 +0100 Subject: [PATCH 417/493] parisc/unaligned: Fix fldd and fstd unaligned handlers on 32-bit kernel Usually the kernel provides fixup routines to emulate the fldd and fstd floating-point instructions if they load or store 8-byte from/to a not natuarally aligned memory location. On a 32-bit kernel I noticed that those unaligned handlers didn't worked and instead the application got a SEGV. While checking the code I found two problems: First, the OPCODE_FLDD_L and OPCODE_FSTD_L cases were ifdef'ed out by the CONFIG_PA20 option, and as such those weren't built on a pure 32-bit kernel. This is now fixed by moving the CONFIG_PA20 #ifdef to prevent the compilation of OPCODE_LDD_L and OPCODE_FSTD_L only, and handling the fldd and fstd instructions. The second problem are two bugs in the 32-bit inline assembly code, where the wrong registers where used. The calculation of the natural alignment used %2 (vall) instead of %3 (ior), and the first word was stored back to address %1 (valh) instead of %3 (ior). Signed-off-by: Helge Deller Cc: stable@vger.kernel.org --- arch/parisc/kernel/unaligned.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/parisc/kernel/unaligned.c b/arch/parisc/kernel/unaligned.c index 237d20dd5622de..a238b7fe8908bb 100644 --- a/arch/parisc/kernel/unaligned.c +++ b/arch/parisc/kernel/unaligned.c @@ -397,7 +397,7 @@ static int emulate_std(struct pt_regs *regs, int frreg, int flop) __asm__ __volatile__ ( " mtsp %4, %%sr1\n" " zdep %2, 29, 2, %%r19\n" -" dep %%r0, 31, 2, %2\n" +" dep %%r0, 31, 2, %3\n" " mtsar %%r19\n" " zvdepi -2, 32, %%r19\n" "1: ldw 0(%%sr1,%3),%%r20\n" @@ -409,7 +409,7 @@ static int emulate_std(struct pt_regs *regs, int frreg, int flop) " andcm %%r21, %%r19, %%r21\n" " or %1, %%r20, %1\n" " or %2, %%r21, %2\n" -"3: stw %1,0(%%sr1,%1)\n" +"3: stw %1,0(%%sr1,%3)\n" "4: stw %%r1,4(%%sr1,%3)\n" "5: stw %2,8(%%sr1,%3)\n" " copy %%r0, %0\n" @@ -596,7 +596,6 @@ void handle_unaligned(struct pt_regs *regs) ret = ERR_NOTHANDLED; /* "undefined", but lets kill them. */ break; } -#ifdef CONFIG_PA20 switch (regs->iir & OPCODE2_MASK) { case OPCODE_FLDD_L: @@ -607,14 +606,15 @@ void handle_unaligned(struct pt_regs *regs) flop=1; ret = emulate_std(regs, R2(regs->iir),1); break; +#ifdef CONFIG_PA20 case OPCODE_LDD_L: ret = emulate_ldd(regs, R2(regs->iir),0); break; case OPCODE_STD_L: ret = emulate_std(regs, R2(regs->iir),0); break; - } #endif + } switch (regs->iir & OPCODE3_MASK) { case OPCODE_FLDW_L: From a97279836867b1cb50a3d4f0b1bf60e0abe6d46c Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Fri, 18 Feb 2022 23:40:14 +0100 Subject: [PATCH 418/493] parisc/unaligned: Fix ldw() and stw() unalignment handlers Fix 3 bugs: a) emulate_stw() doesn't return the error code value, so faulting instructions are not reported and aborted. b) Tell emulate_ldw() to handle fldw_l as floating point instruction c) Tell emulate_ldw() to handle ldw_m as integer instruction Signed-off-by: Helge Deller Cc: stable@vger.kernel.org --- arch/parisc/kernel/unaligned.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/parisc/kernel/unaligned.c b/arch/parisc/kernel/unaligned.c index a238b7fe8908bb..286cec4d86d7b0 100644 --- a/arch/parisc/kernel/unaligned.c +++ b/arch/parisc/kernel/unaligned.c @@ -340,7 +340,7 @@ static int emulate_stw(struct pt_regs *regs, int frreg, int flop) : "r" (val), "r" (regs->ior), "r" (regs->isr) : "r19", "r20", "r21", "r22", "r1", FIXUP_BRANCH_CLOBBER ); - return 0; + return ret; } static int emulate_std(struct pt_regs *regs, int frreg, int flop) { @@ -619,10 +619,10 @@ void handle_unaligned(struct pt_regs *regs) { case OPCODE_FLDW_L: flop=1; - ret = emulate_ldw(regs, R2(regs->iir),0); + ret = emulate_ldw(regs, R2(regs->iir), 1); break; case OPCODE_LDW_M: - ret = emulate_ldw(regs, R2(regs->iir),1); + ret = emulate_ldw(regs, R2(regs->iir), 0); break; case OPCODE_FSTW_L: From 3f1271b54edcc692da5a3663f2aa2a64781f9bc3 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 22 Feb 2022 11:08:01 -0500 Subject: [PATCH 419/493] PCI: Mark all AMD Navi10 and Navi14 GPU ATS as broken MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There are enough VBIOS escapes without the proper workaround that some users still hit this. Microsoft never productized ATS on Windows so OEM platforms that were Windows-only didn't always validate ATS. The advantages of ATS are not worth it compared to the potential instabilities on harvested boards. Disable ATS on all Navi10 and Navi14 boards. Symptoms include: amdgpu 0000:07:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0007 address=0xffffc02000 flags=0x0000] AMD-Vi: Event logged [IO_PAGE_FAULT device=07:00.0 domain=0x0007 address=0xffffc02000 flags=0x0000] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring sdma0 timeout, signaled seq=6047, emitted seq=6049 amdgpu 0000:07:00.0: amdgpu: GPU reset begin! amdgpu 0000:07:00.0: amdgpu: GPU reset succeeded, trying to resume amdgpu 0000:07:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring sdma0 test failed (-110) [drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block failed -110 amdgpu 0000:07:00.0: amdgpu: GPU reset(1) failed Related commits: e8946a53e2a6 ("PCI: Mark AMD Navi14 GPU ATS as broken") a2da5d8cc0b0 ("PCI: Mark AMD Raven iGPU ATS as broken in some platforms") 45beb31d3afb ("PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken") 5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken") d28ca864c493 ("PCI: Mark AMD Stoney Radeon R7 GPU ATS as broken") 9b44b0b09dec ("PCI: Mark AMD Stoney GPU ATS as broken") [bhelgaas: add symptoms and related commits] Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1760 Link: https://lore.kernel.org/r/20220222160801.841643-1-alexander.deucher@amd.com Signed-off-by: Alex Deucher Signed-off-by: Bjorn Helgaas Acked-by: Christian König Acked-by: Guchun Chen --- drivers/pci/quirks.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index d2dd6a6cda608a..65f7f6b0576c68 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -5344,11 +5344,6 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0422, quirk_no_ext_tags); */ static void quirk_amd_harvest_no_ats(struct pci_dev *pdev) { - if ((pdev->device == 0x7312 && pdev->revision != 0x00) || - (pdev->device == 0x7340 && pdev->revision != 0xc5) || - (pdev->device == 0x7341 && pdev->revision != 0x00)) - return; - if (pdev->device == 0x15d8) { if (pdev->revision == 0xcf && pdev->subsystem_vendor == 0xea50 && @@ -5370,10 +5365,19 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x98e4, quirk_amd_harvest_no_ats); /* AMD Iceland dGPU */ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x6900, quirk_amd_harvest_no_ats); /* AMD Navi10 dGPU */ +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7310, quirk_amd_harvest_no_ats); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7312, quirk_amd_harvest_no_ats); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7318, quirk_amd_harvest_no_ats); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7319, quirk_amd_harvest_no_ats); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x731a, quirk_amd_harvest_no_ats); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x731b, quirk_amd_harvest_no_ats); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x731e, quirk_amd_harvest_no_ats); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x731f, quirk_amd_harvest_no_ats); /* AMD Navi14 dGPU */ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7340, quirk_amd_harvest_no_ats); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7341, quirk_amd_harvest_no_ats); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7347, quirk_amd_harvest_no_ats); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x734f, quirk_amd_harvest_no_ats); /* AMD Raven platform iGPU */ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x15d8, quirk_amd_harvest_no_ats); #endif /* CONFIG_PCI_ATS */ From 081bdc9fe05bb23248f5effb6f811da3da4b8252 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Tue, 15 Feb 2022 13:05:11 -0800 Subject: [PATCH 420/493] RDMA/ib_srp: Fix a deadlock Remove the flush_workqueue(system_long_wq) call since flushing system_long_wq is deadlock-prone and since that call is redundant with a preceding cancel_work_sync() Link: https://lore.kernel.org/r/20220215210511.28303-3-bvanassche@acm.org Fixes: ef6c49d87c34 ("IB/srp: Eliminate state SRP_TARGET_DEAD") Reported-by: syzbot+831661966588c802aae9@syzkaller.appspotmail.com Signed-off-by: Bart Van Assche Reviewed-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/ulp/srp/ib_srp.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c index e174e853f8a40c..285b766e4e7049 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.c +++ b/drivers/infiniband/ulp/srp/ib_srp.c @@ -4047,9 +4047,11 @@ static void srp_remove_one(struct ib_device *device, void *client_data) spin_unlock(&host->target_lock); /* - * Wait for tl_err and target port removal tasks. + * srp_queue_remove_work() queues a call to + * srp_remove_target(). The latter function cancels + * target->tl_err_work so waiting for the remove works to + * finish is sufficient. */ - flush_workqueue(system_long_wq); flush_workqueue(srp_remove_wq); kfree(host); From ae42f9288846353982e2eab181fb41e7fd8bf60f Mon Sep 17 00:00:00 2001 From: Shreeya Patel Date: Thu, 17 Feb 2022 01:56:55 +0530 Subject: [PATCH 421/493] gpio: Return EPROBE_DEFER if gc->to_irq is NULL We are racing the registering of .to_irq when probing the i2c driver. This results in random failure of touchscreen devices. Following explains the race condition better. [gpio driver] gpio driver registers gpio chip [gpio consumer] gpio is acquired [gpio consumer] gpiod_to_irq() fails with -ENXIO [gpio driver] gpio driver registers irqchip gpiod_to_irq works at this point, but -ENXIO is fatal We could see the following errors in dmesg logs when gc->to_irq is NULL [2.101857] i2c_hid i2c-FTS3528:00: HID over i2c has not been provided an Int IRQ [2.101953] i2c_hid: probe of i2c-FTS3528:00 failed with error -22 To avoid this situation, defer probing until to_irq is registered. Returning -EPROBE_DEFER would be the first step towards avoiding the failure of devices due to the race in registration of .to_irq. Final solution to this issue would be to avoid using gc irq members until they are fully initialized. This issue has been reported many times in past and people have been using workarounds like changing the pinctrl_amd to built-in instead of loading it as a module or by adding a softdep for pinctrl_amd into the config file. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209413 Reviewed-by: Linus Walleij Reviewed-by: Andy Shevchenko Reported-by: kernel test robot Signed-off-by: Shreeya Patel Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpiolib.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 3859911b61e9d4..a3d14277f17c91 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -3147,6 +3147,16 @@ int gpiod_to_irq(const struct gpio_desc *desc) return retirq; } +#ifdef CONFIG_GPIOLIB_IRQCHIP + if (gc->irq.chip) { + /* + * Avoid race condition with other code, which tries to lookup + * an IRQ before the irqchip has been properly registered, + * i.e. while gpiochip is still being brought up. + */ + return -EPROBE_DEFER; + } +#endif return -ENXIO; } EXPORT_SYMBOL_GPL(gpiod_to_irq); From 7294863a6f01248d72b61d38478978d638641bee Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Tue, 1 Feb 2022 10:26:33 -0600 Subject: [PATCH 422/493] drm/amd: Check if ASPM is enabled from PCIe subsystem commit 0064b0ce85bb ("drm/amd/pm: enable ASPM by default") enabled ASPM by default but a variety of hardware configurations it turns out that this caused a regression. * PPC64LE hardware does not support ASPM at a hardware level. CONFIG_PCIEASPM is often disabled on these architectures. * Some dGPUs on ALD platforms don't work with ASPM enabled and PCIe subsystem disables it Check with the PCIe subsystem to see that ASPM has been enabled or not. Fixes: 0064b0ce85bb ("drm/amd/pm: enable ASPM by default") Link: https://wiki.raptorcs.com/w/images/a/ad/P9_PHB_version1.0_27July2018_pub.pdf Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1723 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1739 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1885 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1907 Tested-by: koba.ko@canonical.com Reviewed-by: Alex Deucher Signed-off-by: Mario Limonciello Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index 63a08999264517..0ead08ba58c2a5 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -2011,6 +2011,9 @@ static int amdgpu_pci_probe(struct pci_dev *pdev, return -ENODEV; } + if (amdgpu_aspm == -1 && !pcie_aspm_enabled(pdev)) + amdgpu_aspm = 0; + if (amdgpu_virtual_display || amdgpu_device_asic_has_dc_support(flags & AMD_ASIC_MASK)) supports_atomic = true; From 3743e7f6fcb938b7d8b7967e6a9442805e269b3d Mon Sep 17 00:00:00 2001 From: Nicholas Kazlauskas Date: Tue, 25 Jan 2022 12:04:34 -0500 Subject: [PATCH 423/493] drm/amd/display: Fix stream->link_enc unassigned during stream removal [Why] Found when running igt@kms_atomic. Userspace attempts to do a TEST_COMMIT when 0 streams which calls dc_remove_stream_from_ctx. This in turn calls link_enc_unassign which ends up modifying stream->link = NULL directly, causing the global link_enc to be removed preventing further link activity and future link validation from passing. [How] We take care of link_enc unassignment at the start of link_enc_cfg_link_encs_assign so this call is no longer necessary. Fixes global state from being modified while unlocked. Reviewed-by: Jimmy Kizito Acked-by: Jasdeep Dhillon Signed-off-by: Nicholas Kazlauskas Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c index b3912ff9dc9113..18757c15852328 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c @@ -1964,10 +1964,6 @@ enum dc_status dc_remove_stream_from_ctx( dc->res_pool, del_pipe->stream_res.stream_enc, false); - /* Release link encoder from stream in new dc_state. */ - if (dc->res_pool->funcs->link_enc_unassign) - dc->res_pool->funcs->link_enc_unassign(new_ctx, del_pipe->stream); - #if defined(CONFIG_DRM_AMD_DC_DCN) if (is_dp_128b_132b_signal(del_pipe)) { update_hpo_dp_stream_engine_usage( From 1e2be869c8a7247a7253ef4f461f85e2f5931b95 Mon Sep 17 00:00:00 2001 From: Chen Gong Date: Thu, 17 Feb 2022 15:29:41 +0800 Subject: [PATCH 424/493] drm/amdgpu: do not enable asic reset for raven2 The GPU reset function of raven2 is not maintained or tested, so it should be very unstable. Now the amdgpu_asic_reset function is added to amdgpu_pmops_suspend, which causes the S3 test of raven2 to fail, so the asic_reset of raven2 is ignored here. Fixes: daf8de0874ab5b ("drm/amdgpu: always reset the asic in suspend (v2)") Signed-off-by: Chen Gong Acked-by: Alex Deucher Reviewed-by: Mario Limonciello Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/soc15.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/soc15.c b/drivers/gpu/drm/amd/amdgpu/soc15.c index d0e37f7f196c3f..12f80fdc1fbc94 100644 --- a/drivers/gpu/drm/amd/amdgpu/soc15.c +++ b/drivers/gpu/drm/amd/amdgpu/soc15.c @@ -619,8 +619,8 @@ soc15_asic_reset_method(struct amdgpu_device *adev) static int soc15_asic_reset(struct amdgpu_device *adev) { /* original raven doesn't have full asic reset */ - if ((adev->apu_flags & AMD_APU_IS_RAVEN) && - !(adev->apu_flags & AMD_APU_IS_RAVEN2)) + if ((adev->apu_flags & AMD_APU_IS_RAVEN) || + (adev->apu_flags & AMD_APU_IS_RAVEN2)) return 0; switch (soc15_asic_reset_method(adev)) { From 97c61e0b7c596cc5f683da30289f92c2e1b4b799 Mon Sep 17 00:00:00 2001 From: Guchun Chen Date: Fri, 18 Feb 2022 12:57:52 +0800 Subject: [PATCH 425/493] Revert "drm/amdgpu: add modifiers in amdgpu_vkms_plane_init()" This reverts commit 4046afcebfc3c8c0dd5666c2671b2c192b344f78. No need to support modifier in virtual kms, otherwise, in SRIOV mode, when lanuching X server, set crtc will fail due to mismatch between primary plane modifier and framebuffer modifier. Signed-off-by: Guchun Chen Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_vkms.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vkms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vkms.c index d99c8779b51e91..5224d9a39737f2 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vkms.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vkms.c @@ -391,7 +391,6 @@ static struct drm_plane *amdgpu_vkms_plane_init(struct drm_device *dev, int index) { struct drm_plane *plane; - uint64_t modifiers[] = {DRM_FORMAT_MOD_LINEAR, DRM_FORMAT_MOD_INVALID}; int ret; plane = kzalloc(sizeof(*plane), GFP_KERNEL); @@ -402,7 +401,7 @@ static struct drm_plane *amdgpu_vkms_plane_init(struct drm_device *dev, &amdgpu_vkms_plane_funcs, amdgpu_vkms_formats, ARRAY_SIZE(amdgpu_vkms_formats), - modifiers, type, NULL); + NULL, type, NULL); if (ret) { kfree(plane); return ERR_PTR(ret); From e2b993302f40c4eb714ecf896dd9e1c5be7d4cd7 Mon Sep 17 00:00:00 2001 From: Guchun Chen Date: Fri, 18 Feb 2022 13:05:26 +0800 Subject: [PATCH 426/493] drm/amdgpu: bypass tiling flag check in virtual display case (v2) vkms leverages common amdgpu framebuffer creation, and also as it does not support FB modifier, there is no need to check tiling flags when initing framebuffer when virtual display is enabled. This can fix below calltrace: amdgpu 0000:00:08.0: GFX9+ requires FB check based on format modifier WARNING: CPU: 0 PID: 1023 at drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:1150 amdgpu_display_framebuffer_init+0x8e7/0xb40 [amdgpu] v2: check adev->enable_virtual_display instead as vkms can be enabled in bare metal as well. Signed-off-by: Leslie Shi Signed-off-by: Guchun Chen Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c index 82011e75ed8599..c4387b38229c25 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c @@ -1141,7 +1141,7 @@ int amdgpu_display_framebuffer_init(struct drm_device *dev, if (ret) return ret; - if (!dev->mode_config.allow_fb_modifiers) { + if (!dev->mode_config.allow_fb_modifiers && !adev->enable_virtual_display) { drm_WARN_ONCE(dev, adev->family >= AMDGPU_FAMILY_AI, "GFX9+ requires FB check based on format modifier\n"); ret = check_tiling_flags_gfx6(rfb); From c1a66c3bc425ff93774fb2f6eefa67b83170dd7e Mon Sep 17 00:00:00 2001 From: Qiang Yu Date: Mon, 21 Feb 2022 17:53:56 +0800 Subject: [PATCH 427/493] drm/amdgpu: check vm ready by amdgpu_vm->evicting flag MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Workstation application ANSA/META v21.1.4 get this error dmesg when running CI test suite provided by ANSA/META: [drm:amdgpu_gem_va_ioctl [amdgpu]] *ERROR* Couldn't update BO_VA (-16) This is caused by: 1. create a 256MB buffer in invisible VRAM 2. CPU map the buffer and access it causes vm_fault and try to move it to visible VRAM 3. force visible VRAM space and traverse all VRAM bos to check if evicting this bo is valuable 4. when checking a VM bo (in invisible VRAM), amdgpu_vm_evictable() will set amdgpu_vm->evicting, but latter due to not in visible VRAM, won't really evict it so not add it to amdgpu_vm->evicted 5. before next CS to clear the amdgpu_vm->evicting, user VM ops ioctl will pass amdgpu_vm_ready() (check amdgpu_vm->evicted) but fail in amdgpu_vm_bo_update_mapping() (check amdgpu_vm->evicting) and get this error log This error won't affect functionality as next CS will finish the waiting VM ops. But we'd better clear the error log by checking the amdgpu_vm->evicting flag in amdgpu_vm_ready() to stop calling amdgpu_vm_bo_update_mapping() later. Another reason is amdgpu_vm->evicted list holds all BOs (both user buffer and page table), but only page table BOs' eviction prevent VM ops. amdgpu_vm->evicting flag is set only for page table BOs, so we should use evicting flag instead of evicted list in amdgpu_vm_ready(). The side effect of this change is: previously blocked VM op (user buffer in "evicted" list but no page table in it) gets done immediately. v2: update commit comments. Acked-by: Paul Menzel Reviewed-by: Christian König Signed-off-by: Qiang Yu Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index b37fc7d7d2c763..d62190b3dd9bba 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -768,11 +768,16 @@ int amdgpu_vm_validate_pt_bos(struct amdgpu_device *adev, struct amdgpu_vm *vm, * Check if all VM PDs/PTs are ready for updates * * Returns: - * True if eviction list is empty. + * True if VM is not evicting. */ bool amdgpu_vm_ready(struct amdgpu_vm *vm) { - return list_empty(&vm->evicted); + bool ret; + + amdgpu_vm_eviction_lock(vm); + ret = !vm->evicting; + amdgpu_vm_eviction_unlock(vm); + return ret; } /** From f908a35b22180c4da64cf2647e4f5f0cd3054da7 Mon Sep 17 00:00:00 2001 From: Meir Lichtinger Date: Mon, 10 Jan 2022 10:14:41 +0200 Subject: [PATCH 428/493] net/mlx5: Update the list of the PCI supported devices Add the upcoming BlueField-4 and ConnectX-8 device IDs. Fixes: 2e9d3e83ab82 ("net/mlx5: Update the list of the PCI supported devices") Signed-off-by: Meir Lichtinger Reviewed-by: Gal Pressman Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index 2c774f367199d6..13f913c13a2dc7 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -1840,10 +1840,12 @@ static const struct pci_device_id mlx5_core_pci_table[] = { { PCI_VDEVICE(MELLANOX, 0x101e), MLX5_PCI_DEV_IS_VF}, /* ConnectX Family mlx5Gen Virtual Function */ { PCI_VDEVICE(MELLANOX, 0x101f) }, /* ConnectX-6 LX */ { PCI_VDEVICE(MELLANOX, 0x1021) }, /* ConnectX-7 */ + { PCI_VDEVICE(MELLANOX, 0x1023) }, /* ConnectX-8 */ { PCI_VDEVICE(MELLANOX, 0xa2d2) }, /* BlueField integrated ConnectX-5 network controller */ { PCI_VDEVICE(MELLANOX, 0xa2d3), MLX5_PCI_DEV_IS_VF}, /* BlueField integrated ConnectX-5 network controller VF */ { PCI_VDEVICE(MELLANOX, 0xa2d6) }, /* BlueField-2 integrated ConnectX-6 Dx network controller */ { PCI_VDEVICE(MELLANOX, 0xa2dc) }, /* BlueField-3 integrated ConnectX-7 network controller */ + { PCI_VDEVICE(MELLANOX, 0xa2df) }, /* BlueField-4 integrated ConnectX-8 network controller */ { 0, } }; From e5b2bc30c21139ae10f0e56989389d0bc7b7b1d6 Mon Sep 17 00:00:00 2001 From: Yevgeny Kliteynik Date: Fri, 24 Dec 2021 01:07:30 +0200 Subject: [PATCH 429/493] net/mlx5: DR, Cache STE shadow memory During rule insertion on each ICM memory chunk we also allocate shadow memory used for management. This includes the hw_ste, dr_ste and miss list per entry. Since the scale of these allocations is large we noticed a performance hiccup that happens once malloc and free are stressed. In extreme usecases when ~1M chunks are freed at once, it might take up to 40 seconds to complete this, up to the point the kernel sees this as self-detected stall on CPU: rcu: INFO: rcu_sched self-detected stall on CPU To resolve this we will increase the reuse of shadow memory. Doing this we see that a time in the aforementioned usecase dropped from ~40 seconds to ~8-10 seconds. Fixes: 29cf8febd185 ("net/mlx5: DR, ICM pool memory allocator") Signed-off-by: Alex Vesker Signed-off-by: Yevgeny Kliteynik Signed-off-by: Saeed Mahameed --- .../mellanox/mlx5/core/steering/dr_icm_pool.c | 109 ++++++++++++------ .../mellanox/mlx5/core/steering/mlx5dr.h | 5 + 2 files changed, 79 insertions(+), 35 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_icm_pool.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_icm_pool.c index 7f6fd9c5e371b4..f496b7e9401b19 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_icm_pool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_icm_pool.c @@ -136,37 +136,35 @@ static void dr_icm_pool_mr_destroy(struct mlx5dr_icm_mr *icm_mr) kvfree(icm_mr); } -static int dr_icm_chunk_ste_init(struct mlx5dr_icm_chunk *chunk) +static int dr_icm_buddy_get_ste_size(struct mlx5dr_icm_buddy_mem *buddy) { - chunk->ste_arr = kvzalloc(chunk->num_of_entries * - sizeof(chunk->ste_arr[0]), GFP_KERNEL); - if (!chunk->ste_arr) - return -ENOMEM; - - chunk->hw_ste_arr = kvzalloc(chunk->num_of_entries * - DR_STE_SIZE_REDUCED, GFP_KERNEL); - if (!chunk->hw_ste_arr) - goto out_free_ste_arr; - - chunk->miss_list = kvmalloc(chunk->num_of_entries * - sizeof(chunk->miss_list[0]), GFP_KERNEL); - if (!chunk->miss_list) - goto out_free_hw_ste_arr; + /* We support only one type of STE size, both for ConnectX-5 and later + * devices. Once the support for match STE which has a larger tag is + * added (32B instead of 16B), the STE size for devices later than + * ConnectX-5 needs to account for that. + */ + return DR_STE_SIZE_REDUCED; +} - return 0; +static void dr_icm_chunk_ste_init(struct mlx5dr_icm_chunk *chunk, int offset) +{ + struct mlx5dr_icm_buddy_mem *buddy = chunk->buddy_mem; + int index = offset / DR_STE_SIZE; -out_free_hw_ste_arr: - kvfree(chunk->hw_ste_arr); -out_free_ste_arr: - kvfree(chunk->ste_arr); - return -ENOMEM; + chunk->ste_arr = &buddy->ste_arr[index]; + chunk->miss_list = &buddy->miss_list[index]; + chunk->hw_ste_arr = buddy->hw_ste_arr + + index * dr_icm_buddy_get_ste_size(buddy); } static void dr_icm_chunk_ste_cleanup(struct mlx5dr_icm_chunk *chunk) { - kvfree(chunk->miss_list); - kvfree(chunk->hw_ste_arr); - kvfree(chunk->ste_arr); + struct mlx5dr_icm_buddy_mem *buddy = chunk->buddy_mem; + + memset(chunk->hw_ste_arr, 0, + chunk->num_of_entries * dr_icm_buddy_get_ste_size(buddy)); + memset(chunk->ste_arr, 0, + chunk->num_of_entries * sizeof(chunk->ste_arr[0])); } static enum mlx5dr_icm_type @@ -189,6 +187,44 @@ static void dr_icm_chunk_destroy(struct mlx5dr_icm_chunk *chunk, kvfree(chunk); } +static int dr_icm_buddy_init_ste_cache(struct mlx5dr_icm_buddy_mem *buddy) +{ + int num_of_entries = + mlx5dr_icm_pool_chunk_size_to_entries(buddy->pool->max_log_chunk_sz); + + buddy->ste_arr = kvcalloc(num_of_entries, + sizeof(struct mlx5dr_ste), GFP_KERNEL); + if (!buddy->ste_arr) + return -ENOMEM; + + /* Preallocate full STE size on non-ConnectX-5 devices since + * we need to support both full and reduced with the same cache. + */ + buddy->hw_ste_arr = kvcalloc(num_of_entries, + dr_icm_buddy_get_ste_size(buddy), GFP_KERNEL); + if (!buddy->hw_ste_arr) + goto free_ste_arr; + + buddy->miss_list = kvmalloc(num_of_entries * sizeof(struct list_head), GFP_KERNEL); + if (!buddy->miss_list) + goto free_hw_ste_arr; + + return 0; + +free_hw_ste_arr: + kvfree(buddy->hw_ste_arr); +free_ste_arr: + kvfree(buddy->ste_arr); + return -ENOMEM; +} + +static void dr_icm_buddy_cleanup_ste_cache(struct mlx5dr_icm_buddy_mem *buddy) +{ + kvfree(buddy->ste_arr); + kvfree(buddy->hw_ste_arr); + kvfree(buddy->miss_list); +} + static int dr_icm_buddy_create(struct mlx5dr_icm_pool *pool) { struct mlx5dr_icm_buddy_mem *buddy; @@ -208,11 +244,19 @@ static int dr_icm_buddy_create(struct mlx5dr_icm_pool *pool) buddy->icm_mr = icm_mr; buddy->pool = pool; + if (pool->icm_type == DR_ICM_TYPE_STE) { + /* Reduce allocations by preallocating and reusing the STE structures */ + if (dr_icm_buddy_init_ste_cache(buddy)) + goto err_cleanup_buddy; + } + /* add it to the -start- of the list in order to search in it first */ list_add(&buddy->list_node, &pool->buddy_mem_list); return 0; +err_cleanup_buddy: + mlx5dr_buddy_cleanup(buddy); err_free_buddy: kvfree(buddy); free_mr: @@ -234,6 +278,9 @@ static void dr_icm_buddy_destroy(struct mlx5dr_icm_buddy_mem *buddy) mlx5dr_buddy_cleanup(buddy); + if (buddy->pool->icm_type == DR_ICM_TYPE_STE) + dr_icm_buddy_cleanup_ste_cache(buddy); + kvfree(buddy); } @@ -261,26 +308,18 @@ dr_icm_chunk_create(struct mlx5dr_icm_pool *pool, chunk->byte_size = mlx5dr_icm_pool_chunk_size_to_byte(chunk_size, pool->icm_type); chunk->seg = seg; + chunk->buddy_mem = buddy_mem_pool; - if (pool->icm_type == DR_ICM_TYPE_STE && dr_icm_chunk_ste_init(chunk)) { - mlx5dr_err(pool->dmn, - "Failed to init ste arrays (order: %d)\n", - chunk_size); - goto out_free_chunk; - } + if (pool->icm_type == DR_ICM_TYPE_STE) + dr_icm_chunk_ste_init(chunk, offset); buddy_mem_pool->used_memory += chunk->byte_size; - chunk->buddy_mem = buddy_mem_pool; INIT_LIST_HEAD(&chunk->chunk_list); /* chunk now is part of the used_list */ list_add_tail(&chunk->chunk_list, &buddy_mem_pool->used_list); return chunk; - -out_free_chunk: - kvfree(chunk); - return NULL; } static bool dr_icm_pool_is_sync_required(struct mlx5dr_icm_pool *pool) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/mlx5dr.h b/drivers/net/ethernet/mellanox/mlx5/core/steering/mlx5dr.h index c7c93131b762b6..dfa223415fe24f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/steering/mlx5dr.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/mlx5dr.h @@ -160,6 +160,11 @@ struct mlx5dr_icm_buddy_mem { * sync_ste command sets them free. */ struct list_head hot_list; + + /* Memory optimisation */ + struct mlx5dr_ste *ste_arr; + struct list_head *miss_list; + u8 *hw_ste_arr; }; int mlx5dr_buddy_init(struct mlx5dr_icm_buddy_mem *buddy, From 0aec12d97b2036af0946e3d582144739860ac07b Mon Sep 17 00:00:00 2001 From: Yevgeny Kliteynik Date: Tue, 11 Jan 2022 03:00:03 +0200 Subject: [PATCH 430/493] net/mlx5: DR, Fix slab-out-of-bounds in mlx5_cmd_dr_create_fte When adding a rule with 32 destinations, we hit the following out-of-band access issue: BUG: KASAN: slab-out-of-bounds in mlx5_cmd_dr_create_fte+0x18ee/0x1e70 This patch fixes the issue by both increasing the allocated buffers to accommodate for the needed actions and by checking the number of actions to prevent this issue when a rule with too many actions is provided. Fixes: 1ffd498901c1 ("net/mlx5: DR, Increase supported num of actions to 32") Signed-off-by: Yevgeny Kliteynik Reviewed-by: Alex Vesker Signed-off-by: Saeed Mahameed --- .../mellanox/mlx5/core/steering/fs_dr.c | 33 +++++++++++++++---- 1 file changed, 26 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/fs_dr.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/fs_dr.c index a476da2424f8e3..3f311462bedf3e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/steering/fs_dr.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/fs_dr.c @@ -233,7 +233,11 @@ static bool contain_vport_reformat_action(struct mlx5_flow_rule *dst) dst->dest_attr.vport.flags & MLX5_FLOW_DEST_VPORT_REFORMAT_ID; } -#define MLX5_FLOW_CONTEXT_ACTION_MAX 32 +/* We want to support a rule with 32 destinations, which means we need to + * account for 32 destinations plus usually a counter plus one more action + * for a multi-destination flow table. + */ +#define MLX5_FLOW_CONTEXT_ACTION_MAX 34 static int mlx5_cmd_dr_create_fte(struct mlx5_flow_root_namespace *ns, struct mlx5_flow_table *ft, struct mlx5_flow_group *group, @@ -403,9 +407,9 @@ static int mlx5_cmd_dr_create_fte(struct mlx5_flow_root_namespace *ns, enum mlx5_flow_destination_type type = dst->dest_attr.type; u32 id; - if (num_actions == MLX5_FLOW_CONTEXT_ACTION_MAX || - num_term_actions >= MLX5_FLOW_CONTEXT_ACTION_MAX) { - err = -ENOSPC; + if (fs_dr_num_actions == MLX5_FLOW_CONTEXT_ACTION_MAX || + num_term_actions == MLX5_FLOW_CONTEXT_ACTION_MAX) { + err = -EOPNOTSUPP; goto free_actions; } @@ -478,8 +482,9 @@ static int mlx5_cmd_dr_create_fte(struct mlx5_flow_root_namespace *ns, MLX5_FLOW_DESTINATION_TYPE_COUNTER) continue; - if (num_actions == MLX5_FLOW_CONTEXT_ACTION_MAX) { - err = -ENOSPC; + if (num_actions == MLX5_FLOW_CONTEXT_ACTION_MAX || + fs_dr_num_actions == MLX5_FLOW_CONTEXT_ACTION_MAX) { + err = -EOPNOTSUPP; goto free_actions; } @@ -499,14 +504,28 @@ static int mlx5_cmd_dr_create_fte(struct mlx5_flow_root_namespace *ns, params.match_sz = match_sz; params.match_buf = (u64 *)fte->val; if (num_term_actions == 1) { - if (term_actions->reformat) + if (term_actions->reformat) { + if (num_actions == MLX5_FLOW_CONTEXT_ACTION_MAX) { + err = -EOPNOTSUPP; + goto free_actions; + } actions[num_actions++] = term_actions->reformat; + } + if (num_actions == MLX5_FLOW_CONTEXT_ACTION_MAX) { + err = -EOPNOTSUPP; + goto free_actions; + } actions[num_actions++] = term_actions->dest; } else if (num_term_actions > 1) { bool ignore_flow_level = !!(fte->action.flags & FLOW_ACT_IGNORE_FLOW_LEVEL); + if (num_actions == MLX5_FLOW_CONTEXT_ACTION_MAX || + fs_dr_num_actions == MLX5_FLOW_CONTEXT_ACTION_MAX) { + err = -EOPNOTSUPP; + goto free_actions; + } tmp_action = mlx5dr_action_create_mult_dest_tbl(domain, term_actions, num_term_actions, From ffb0753b954763d94f52c901adfe58ed0d4005e6 Mon Sep 17 00:00:00 2001 From: Yevgeny Kliteynik Date: Thu, 13 Jan 2022 14:52:48 +0200 Subject: [PATCH 431/493] net/mlx5: DR, Don't allow match on IP w/o matching on full ethertype/ip_version Currently SMFS allows adding rule with matching on src/dst IP w/o matching on full ethertype or ip_version, which is not supported by HW. This patch fixes this issue and adds the check as it is done in DMFS. Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities") Signed-off-by: Yevgeny Kliteynik Reviewed-by: Alex Vesker Signed-off-by: Saeed Mahameed --- .../mellanox/mlx5/core/steering/dr_matcher.c | 20 +++--------- .../mellanox/mlx5/core/steering/dr_ste.c | 32 ++++++++++++++++++- .../mellanox/mlx5/core/steering/dr_types.h | 10 ++++++ 3 files changed, 45 insertions(+), 17 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_matcher.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_matcher.c index e87cf498c77bf3..38971fe1dfe1b5 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_matcher.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_matcher.c @@ -13,18 +13,6 @@ static bool dr_mask_is_dmac_set(struct mlx5dr_match_spec *spec) return (spec->dmac_47_16 || spec->dmac_15_0); } -static bool dr_mask_is_src_addr_set(struct mlx5dr_match_spec *spec) -{ - return (spec->src_ip_127_96 || spec->src_ip_95_64 || - spec->src_ip_63_32 || spec->src_ip_31_0); -} - -static bool dr_mask_is_dst_addr_set(struct mlx5dr_match_spec *spec) -{ - return (spec->dst_ip_127_96 || spec->dst_ip_95_64 || - spec->dst_ip_63_32 || spec->dst_ip_31_0); -} - static bool dr_mask_is_l3_base_set(struct mlx5dr_match_spec *spec) { return (spec->ip_protocol || spec->frag || spec->tcp_flags || @@ -503,11 +491,11 @@ static int dr_matcher_set_ste_builders(struct mlx5dr_matcher *matcher, &mask, inner, rx); if (outer_ipv == DR_RULE_IPV6) { - if (dr_mask_is_dst_addr_set(&mask.outer)) + if (DR_MASK_IS_DST_IP_SET(&mask.outer)) mlx5dr_ste_build_eth_l3_ipv6_dst(ste_ctx, &sb[idx++], &mask, inner, rx); - if (dr_mask_is_src_addr_set(&mask.outer)) + if (DR_MASK_IS_SRC_IP_SET(&mask.outer)) mlx5dr_ste_build_eth_l3_ipv6_src(ste_ctx, &sb[idx++], &mask, inner, rx); @@ -610,11 +598,11 @@ static int dr_matcher_set_ste_builders(struct mlx5dr_matcher *matcher, &mask, inner, rx); if (inner_ipv == DR_RULE_IPV6) { - if (dr_mask_is_dst_addr_set(&mask.inner)) + if (DR_MASK_IS_DST_IP_SET(&mask.inner)) mlx5dr_ste_build_eth_l3_ipv6_dst(ste_ctx, &sb[idx++], &mask, inner, rx); - if (dr_mask_is_src_addr_set(&mask.inner)) + if (DR_MASK_IS_SRC_IP_SET(&mask.inner)) mlx5dr_ste_build_eth_l3_ipv6_src(ste_ctx, &sb[idx++], &mask, inner, rx); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.c index 7e61742e58a0e2..187e29b409b6cf 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.c @@ -602,12 +602,34 @@ int mlx5dr_ste_set_action_decap_l3_list(struct mlx5dr_ste_ctx *ste_ctx, used_hw_action_num); } +static int dr_ste_build_pre_check_spec(struct mlx5dr_domain *dmn, + struct mlx5dr_match_spec *spec) +{ + if (spec->ip_version) { + if (spec->ip_version != 0xf) { + mlx5dr_err(dmn, + "Partial ip_version mask with src/dst IP is not supported\n"); + return -EINVAL; + } + } else if (spec->ethertype != 0xffff && + (DR_MASK_IS_SRC_IP_SET(spec) || DR_MASK_IS_DST_IP_SET(spec))) { + mlx5dr_err(dmn, + "Partial/no ethertype mask with src/dst IP is not supported\n"); + return -EINVAL; + } + + return 0; +} + int mlx5dr_ste_build_pre_check(struct mlx5dr_domain *dmn, u8 match_criteria, struct mlx5dr_match_param *mask, struct mlx5dr_match_param *value) { - if (!value && (match_criteria & DR_MATCHER_CRITERIA_MISC)) { + if (value) + return 0; + + if (match_criteria & DR_MATCHER_CRITERIA_MISC) { if (mask->misc.source_port && mask->misc.source_port != 0xffff) { mlx5dr_err(dmn, "Partial mask source_port is not supported\n"); @@ -621,6 +643,14 @@ int mlx5dr_ste_build_pre_check(struct mlx5dr_domain *dmn, } } + if ((match_criteria & DR_MATCHER_CRITERIA_OUTER) && + dr_ste_build_pre_check_spec(dmn, &mask->outer)) + return -EINVAL; + + if ((match_criteria & DR_MATCHER_CRITERIA_INNER) && + dr_ste_build_pre_check_spec(dmn, &mask->inner)) + return -EINVAL; + return 0; } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h index 1b3d484b99be19..55fcb751e24a43 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h @@ -798,6 +798,16 @@ struct mlx5dr_match_param { (_misc3)->icmpv4_code || \ (_misc3)->icmpv4_header_data) +#define DR_MASK_IS_SRC_IP_SET(_spec) ((_spec)->src_ip_127_96 || \ + (_spec)->src_ip_95_64 || \ + (_spec)->src_ip_63_32 || \ + (_spec)->src_ip_31_0) + +#define DR_MASK_IS_DST_IP_SET(_spec) ((_spec)->dst_ip_127_96 || \ + (_spec)->dst_ip_95_64 || \ + (_spec)->dst_ip_63_32 || \ + (_spec)->dst_ip_31_0) + struct mlx5dr_esw_caps { u64 drop_icm_address_rx; u64 drop_icm_address_tx; From ecd9c5cd46e013659e2fad433057bad1ba66888e Mon Sep 17 00:00:00 2001 From: Yevgeny Kliteynik Date: Wed, 29 Dec 2021 22:22:05 +0200 Subject: [PATCH 432/493] net/mlx5: DR, Fix the threshold that defines when pool sync is initiated When deciding whether to start syncing and actually free all the "hot" ICM chunks, we need to consider the type of the ICM chunks that we're dealing with. For instance, the amount of available ICM for MODIFY_ACTION is significantly lower than the usual STE ICM, so the threshold should account for that - otherwise we can deplete MODIFY_ACTION memory just by creating and deleting the same modify header action in a continuous loop. This patch replaces the hard-coded threshold with a dynamic value. Fixes: 1c58651412bb ("net/mlx5: DR, ICM memory pools sync optimization") Signed-off-by: Yevgeny Kliteynik Reviewed-by: Alex Vesker Signed-off-by: Saeed Mahameed --- .../mellanox/mlx5/core/steering/dr_icm_pool.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_icm_pool.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_icm_pool.c index f496b7e9401b19..e289cfdbce0751 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_icm_pool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_icm_pool.c @@ -4,7 +4,6 @@ #include "dr_types.h" #define DR_ICM_MODIFY_HDR_ALIGN_BASE 64 -#define DR_ICM_SYNC_THRESHOLD_POOL (64 * 1024 * 1024) struct mlx5dr_icm_pool { enum mlx5dr_icm_type icm_type; @@ -324,10 +323,14 @@ dr_icm_chunk_create(struct mlx5dr_icm_pool *pool, static bool dr_icm_pool_is_sync_required(struct mlx5dr_icm_pool *pool) { - if (pool->hot_memory_size > DR_ICM_SYNC_THRESHOLD_POOL) - return true; + int allow_hot_size; - return false; + /* sync when hot memory reaches half of the pool size */ + allow_hot_size = + mlx5dr_icm_pool_chunk_size_to_byte(pool->max_log_chunk_sz, + pool->icm_type) / 2; + + return pool->hot_memory_size > allow_hot_size; } static int dr_icm_pool_sync_all_buddy_pools(struct mlx5dr_icm_pool *pool) From 7f839965b2d77e1926ad08b23c51d60988f10a99 Mon Sep 17 00:00:00 2001 From: Maher Sanalla Date: Wed, 16 Feb 2022 11:01:04 +0200 Subject: [PATCH 433/493] net/mlx5: Update log_max_qp value to be 17 at most Currently, log_max_qp value is dependent on what FW reports as its max capability. In reality, due to a bug, some FWs report a value greater than 17, even though they don't support log_max_qp > 17. This FW issue led the driver to exhaust memory on startup. Thus, log_max_qp value is set to be no more than 17 regardless of what FW reports, as it was before the cited commit. Fixes: f79a609ea6bf ("net/mlx5: Update log_max_qp value to FW max capability") Signed-off-by: Maher Sanalla Reviewed-by: Avihai Horon Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index 13f913c13a2dc7..bba72b220cc3f4 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -526,7 +526,7 @@ static int handle_hca_cap(struct mlx5_core_dev *dev, void *set_ctx) /* Check log_max_qp from HCA caps to set in current profile */ if (prof->log_max_qp == LOG_MAX_SUPPORTED_QPS) { - prof->log_max_qp = MLX5_CAP_GEN_MAX(dev, log_max_qp); + prof->log_max_qp = min_t(u8, 17, MLX5_CAP_GEN_MAX(dev, log_max_qp)); } else if (MLX5_CAP_GEN_MAX(dev, log_max_qp) < prof->log_max_qp) { mlx5_core_warn(dev, "log_max_qp value in current profile is %d, changing it to HCA capability limit (%d)\n", prof->log_max_qp, From 07666c75ad17d7389b18ac0235c8cf41e1504ea8 Mon Sep 17 00:00:00 2001 From: Ariel Levkovich Date: Sat, 29 Jan 2022 01:39:24 +0200 Subject: [PATCH 434/493] net/mlx5: Fix wrong limitation of metadata match on ecpf Match metadata support check returns false for ecpf device. However, this support does exist for ecpf and therefore this limitation should be removed to allow feature such as stacked devices and internal port offloaded to be supported. Fixes: 92ab1eb392c6 ("net/mlx5: E-Switch, Enable vport metadata matching if firmware supports it") Signed-off-by: Ariel Levkovich Reviewed-by: Maor Dickman Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c index 9a7b25692505ef..cfcd72bad9af66 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c @@ -2838,10 +2838,6 @@ bool mlx5_esw_vport_match_metadata_supported(const struct mlx5_eswitch *esw) if (!MLX5_CAP_ESW_FLOWTABLE(esw->dev, flow_source)) return false; - if (mlx5_core_is_ecpf_esw_manager(esw->dev) || - mlx5_ecpf_vport_exists(esw->dev)) - return false; - return true; } From be7f4b0ab149afd19514929fad824b2117d238c9 Mon Sep 17 00:00:00 2001 From: Chris Mi Date: Tue, 14 Dec 2021 03:52:53 +0200 Subject: [PATCH 435/493] net/mlx5: Fix tc max supported prio for nic mode Only prio 1 is supported if firmware doesn't support ignore flow level for nic mode. The offending commit removed the check wrongly. Add it back. Fixes: 9a99c8f1253a ("net/mlx5e: E-Switch, Offload all chain 0 priorities when modify header and forward action is not supported") Signed-off-by: Chris Mi Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/lib/fs_chains.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/fs_chains.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/fs_chains.c index df58cba37930ae..1e8ec4f236b28e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/lib/fs_chains.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/fs_chains.c @@ -121,6 +121,9 @@ u32 mlx5_chains_get_nf_ft_chain(struct mlx5_fs_chains *chains) u32 mlx5_chains_get_prio_range(struct mlx5_fs_chains *chains) { + if (!mlx5_chains_prios_supported(chains)) + return 1; + if (mlx5_chains_ignore_flow_level_supported(chains)) return UINT_MAX; From b645e57debca846f51b3209907546ea857ddd3f5 Mon Sep 17 00:00:00 2001 From: Maor Gottlieb Date: Mon, 24 Jan 2022 21:25:04 +0200 Subject: [PATCH 436/493] net/mlx5: Fix possible deadlock on rule deletion Add missing call to up_write_ref_node() which releases the semaphore in case the FTE doesn't have destinations, such in drop rule case. Fixes: 465e7baab6d9 ("net/mlx5: Fix deletion of duplicate rules") Signed-off-by: Maor Gottlieb Reviewed-by: Mark Bloch Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c index b628917e38e465..537c82b9aa530e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c @@ -2074,6 +2074,8 @@ void mlx5_del_flow_rules(struct mlx5_flow_handle *handle) fte->node.del_hw_func = NULL; up_write_ref_node(&fte->node, false); tree_put_node(&fte->node, false); + } else { + up_write_ref_node(&fte->node, false); } kfree(handle); } From 0b89429722353d112f8b8b29ca397e95fa994d27 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Wed, 2 Feb 2022 16:07:21 +0200 Subject: [PATCH 437/493] net/mlx5e: Fix wrong return value on ioctl EEPROM query failure The ioctl EEPROM query wrongly returns success on read failures, fix that by returning the appropriate error code. Fixes: bb64143eee8c ("net/mlx5e: Add ethtool support for dump module EEPROM") Signed-off-by: Gal Pressman Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index 57d755db1cf5a9..6e80585d731fe7 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -1792,7 +1792,7 @@ static int mlx5e_get_module_eeprom(struct net_device *netdev, if (size_read < 0) { netdev_err(priv->netdev, "%s: mlx5_query_eeprom failed:0x%x\n", __func__, size_read); - return 0; + return size_read; } i += size_read; From 7eaf1f37b8817c608c4e959d69986ef459d345cd Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Mon, 31 Jan 2022 10:26:19 +0200 Subject: [PATCH 438/493] net/mlx5e: kTLS, Use CHECKSUM_UNNECESSARY for device-offloaded packets For RX TLS device-offloaded packets, the HW spec guarantees checksum validation for the offloaded packets, but does not define whether the CQE.checksum field matches the original packet (ciphertext) or the decrypted one (plaintext). This latitude allows architetctural improvements between generations of chips, resulting in different decisions regarding the value type of CQE.checksum. Hence, for these packets, the device driver should not make use of this CQE field. Here we block CHECKSUM_COMPLETE usage for RX TLS device-offloaded packets, and use CHECKSUM_UNNECESSARY instead. Value of the packet's tcp_hdr.csum is not modified by the HW, and it always matches the original ciphertext. Fixes: 1182f3659357 ("net/mlx5e: kTLS, Add kTLS RX HW offload support") Signed-off-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c index ee0a8f5206e3a0..6530d7bd504533 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c @@ -1349,7 +1349,8 @@ static inline void mlx5e_handle_csum(struct net_device *netdev, } /* True when explicitly set via priv flag, or XDP prog is loaded */ - if (test_bit(MLX5E_RQ_STATE_NO_CSUM_COMPLETE, &rq->state)) + if (test_bit(MLX5E_RQ_STATE_NO_CSUM_COMPLETE, &rq->state) || + get_cqe_tls_offload(cqe)) goto csum_unnecessary; /* CQE csum doesn't cover padding octets in short ethernet From 23216d387c40b090b221ad457c95912fb47eb11e Mon Sep 17 00:00:00 2001 From: Roi Dayan Date: Tue, 4 Jan 2022 10:38:02 +0200 Subject: [PATCH 439/493] net/mlx5e: TC, Reject rules with drop and modify hdr action This kind of action is not supported by firmware and generates a syndrome. kernel: mlx5_core 0000:08:00.0: mlx5_cmd_check:777:(pid 102063): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x8708c3) Fixes: d7e75a325cb2 ("net/mlx5e: Add offloading of E-Switch TC pedit (header re-write) actions") Signed-off-by: Roi Dayan Reviewed-by: Maor Dickman Reviewed-by: Oz Shlomo Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index 2022fa4a959850..34700cf1285e6c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -3204,6 +3204,12 @@ actions_match_supported(struct mlx5e_priv *priv, return false; } + if (actions & MLX5_FLOW_CONTEXT_ACTION_MOD_HDR && + actions & MLX5_FLOW_CONTEXT_ACTION_DROP) { + NL_SET_ERR_MSG_MOD(extack, "Drop with modify header action is not supported"); + return false; + } + if (actions & MLX5_FLOW_CONTEXT_ACTION_MOD_HDR && !modify_header_match_supported(priv, &parse_attr->spec, flow_action, actions, ct_flow, ct_clear, extack)) From 3d65492a86d4e6675734646929759138a023d914 Mon Sep 17 00:00:00 2001 From: Roi Dayan Date: Mon, 17 Jan 2022 15:00:30 +0200 Subject: [PATCH 440/493] net/mlx5e: TC, Reject rules with forward and drop actions Such rules are redundant but allowed and passed to the driver. The driver does not support offloading such rules so return an error. Fixes: 03a9d11e6eeb ("net/mlx5e: Add TC drop and mirred/redirect action parsing for SRIOV offloads") Signed-off-by: Roi Dayan Reviewed-by: Oz Shlomo Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index 34700cf1285e6c..b27532a9301e75 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -3204,6 +3204,12 @@ actions_match_supported(struct mlx5e_priv *priv, return false; } + if (!(~actions & + (MLX5_FLOW_CONTEXT_ACTION_FWD_DEST | MLX5_FLOW_CONTEXT_ACTION_DROP))) { + NL_SET_ERR_MSG_MOD(extack, "Rule cannot support forward+drop action"); + return false; + } + if (actions & MLX5_FLOW_CONTEXT_ACTION_MOD_HDR && actions & MLX5_FLOW_CONTEXT_ACTION_DROP) { NL_SET_ERR_MSG_MOD(extack, "Drop with modify header action is not supported"); From fb7e76ea3f3b6238dda2f19a4212052d2caf00aa Mon Sep 17 00:00:00 2001 From: Roi Dayan Date: Thu, 3 Feb 2022 09:42:19 +0200 Subject: [PATCH 441/493] net/mlx5e: TC, Skip redundant ct clear actions Offload of ct clear action is just resetting the reg_c register. It's done by allocating modify hdr resources which is limited. Doing it multiple times is redundant and wasting modify hdr resources and if resources depleted the driver will fail offloading the rule. Ignore redundant ct clear actions after the first one. Fixes: 806401c20a0f ("net/mlx5e: CT, Fix multiple allocations and memleak of mod acts") Signed-off-by: Roi Dayan Reviewed-by: Ariel Levkovich Reviewed-by: Maor Dickman Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/act.h | 1 + drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/ct.c | 7 +++++++ 2 files changed, 8 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/act.h b/drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/act.h index 26efa33de56fbf..10a40487d5360b 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/act.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/act.h @@ -16,6 +16,7 @@ struct mlx5e_tc_act_parse_state { unsigned int num_actions; struct mlx5e_tc_flow *flow; struct netlink_ext_ack *extack; + bool ct_clear; bool encap; bool decap; bool mpls_push; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/ct.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/ct.c index 06ec30cdb269e2..58cc33f1363d23 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/ct.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/ct.c @@ -27,8 +27,13 @@ tc_act_parse_ct(struct mlx5e_tc_act_parse_state *parse_state, struct mlx5e_priv *priv, struct mlx5_flow_attr *attr) { + bool clear_action = act->ct.action & TCA_CT_ACT_CLEAR; int err; + /* It's redundant to do ct clear more than once. */ + if (clear_action && parse_state->ct_clear) + return 0; + err = mlx5_tc_ct_parse_action(parse_state->ct_priv, attr, &attr->parse_attr->mod_hdr_acts, act, parse_state->extack); @@ -40,6 +45,8 @@ tc_act_parse_ct(struct mlx5e_tc_act_parse_state *parse_state, if (mlx5e_is_eswitch_flow(parse_state->flow)) attr->esw_attr->split_count = attr->esw_attr->out_count; + parse_state->ct_clear = clear_action; + return 0; } From 7fac0529038021919ef56a9c3218d8012f187cbb Mon Sep 17 00:00:00 2001 From: Lama Kayal Date: Tue, 1 Feb 2022 11:24:41 +0200 Subject: [PATCH 442/493] net/mlx5e: Add feature check for set fec counters Fec counters support is checked via the PCAM feature_cap_mask, bit 0: PPCNT_counter_group_Phy_statistical_counter_group. Add feature check to avoid faulty behavior. Fixes: 0a1498ebfa55 ("net/mlx5e: Expose FEC counters via ethtool") Signed-off-by: Lama Kayal Reviewed-by: Gal Pressman Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_stats.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c index 26e326fe503cea..00f1d16db45689 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c @@ -1254,9 +1254,6 @@ static void fec_set_corrected_bits_total(struct mlx5e_priv *priv, u32 in[MLX5_ST_SZ_DW(ppcnt_reg)] = {}; int sz = MLX5_ST_SZ_BYTES(ppcnt_reg); - if (!MLX5_CAP_PCAM_FEATURE(mdev, ppcnt_statistical_group)) - return; - MLX5_SET(ppcnt_reg, in, local_port, 1); MLX5_SET(ppcnt_reg, in, grp, MLX5_PHYSICAL_LAYER_STATISTICAL_GROUP); if (mlx5_core_access_reg(mdev, in, sz, ppcnt_phy_statistical, @@ -1272,6 +1269,9 @@ static void fec_set_corrected_bits_total(struct mlx5e_priv *priv, void mlx5e_stats_fec_get(struct mlx5e_priv *priv, struct ethtool_fec_stats *fec_stats) { + if (!MLX5_CAP_PCAM_FEATURE(priv->mdev, ppcnt_statistical_group)) + return; + fec_set_corrected_bits_total(priv, fec_stats); fec_set_block_stats(priv, fec_stats); } From c63741b426e11062631b013c3396f5452bbc0034 Mon Sep 17 00:00:00 2001 From: Maor Dickman Date: Thu, 6 Jan 2022 14:10:18 +0200 Subject: [PATCH 443/493] net/mlx5e: Fix MPLSoUDP encap to use MPLS action information Currently the MPLSoUDP encap builds the MPLS header using encap action information (tunnel id, ttl and tos) instead of the MPLS action information (label, ttl, tc and bos) which is wrong. Fix by storing the MPLS action information during the flow action parse and later using it to create the encap MPLS header. Fixes: f828ca6a2fb6 ("net/mlx5e: Add support for hw encapsulation of MPLS over UDP") Signed-off-by: Maor Dickman Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed --- .../net/ethernet/mellanox/mlx5/core/en/tc/act/act.h | 1 + .../ethernet/mellanox/mlx5/core/en/tc/act/mirred.c | 6 ++++++ .../net/ethernet/mellanox/mlx5/core/en/tc/act/mpls.c | 11 +++++++++++ drivers/net/ethernet/mellanox/mlx5/core/en/tc_priv.h | 1 + .../net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c | 3 +++ .../ethernet/mellanox/mlx5/core/en/tc_tun_mplsoudp.c | 5 ++--- drivers/net/ethernet/mellanox/mlx5/core/en_rep.h | 8 ++++++++ 7 files changed, 32 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/act.h b/drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/act.h index 10a40487d5360b..9cc844bd00f59c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/act.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/act.h @@ -22,6 +22,7 @@ struct mlx5e_tc_act_parse_state { bool mpls_push; bool ptype_host; const struct ip_tunnel_info *tun_info; + struct mlx5e_mpls_info mpls_info; struct pedit_headers_action hdrs[__PEDIT_CMD_MAX]; int ifindexes[MLX5_MAX_FLOW_FWD_VPORTS]; int if_count; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/mirred.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/mirred.c index c614fc7fdc9c9f..2e615e0ba972b2 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/mirred.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/mirred.c @@ -177,6 +177,12 @@ parse_mirred_encap(struct mlx5e_tc_act_parse_state *parse_state, return -ENOMEM; parse_state->encap = false; + + if (parse_state->mpls_push) { + memcpy(&parse_attr->mpls_info[esw_attr->out_count], + &parse_state->mpls_info, sizeof(parse_state->mpls_info)); + parse_state->mpls_push = false; + } esw_attr->dests[esw_attr->out_count].flags |= MLX5_ESW_DEST_ENCAP; esw_attr->out_count++; /* attr->dests[].rep is resolved when we handle encap */ diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/mpls.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/mpls.c index 784fc4f68b1e41..89ca88c78840d5 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/mpls.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/mpls.c @@ -22,6 +22,16 @@ tc_act_can_offload_mpls_push(struct mlx5e_tc_act_parse_state *parse_state, return true; } +static void +copy_mpls_info(struct mlx5e_mpls_info *mpls_info, + const struct flow_action_entry *act) +{ + mpls_info->label = act->mpls_push.label; + mpls_info->tc = act->mpls_push.tc; + mpls_info->bos = act->mpls_push.bos; + mpls_info->ttl = act->mpls_push.ttl; +} + static int tc_act_parse_mpls_push(struct mlx5e_tc_act_parse_state *parse_state, const struct flow_action_entry *act, @@ -29,6 +39,7 @@ tc_act_parse_mpls_push(struct mlx5e_tc_act_parse_state *parse_state, struct mlx5_flow_attr *attr) { parse_state->mpls_push = true; + copy_mpls_info(&parse_state->mpls_info, act); return 0; } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_priv.h b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_priv.h index f832c26ff2c3e0..70b40ae384e42b 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_priv.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_priv.h @@ -35,6 +35,7 @@ enum { struct mlx5e_tc_flow_parse_attr { const struct ip_tunnel_info *tun_info[MLX5_MAX_FLOW_FWD_VPORTS]; + struct mlx5e_mpls_info mpls_info[MLX5_MAX_FLOW_FWD_VPORTS]; struct net_device *filter_dev; struct mlx5_flow_spec spec; struct mlx5e_tc_mod_hdr_acts mod_hdr_acts; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c index 9918ed8c059b6b..d39d0dae22fcee 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c @@ -750,6 +750,7 @@ int mlx5e_attach_encap(struct mlx5e_priv *priv, struct mlx5e_tc_flow_parse_attr *parse_attr; struct mlx5_flow_attr *attr = flow->attr; const struct ip_tunnel_info *tun_info; + const struct mlx5e_mpls_info *mpls_info; unsigned long tbl_time_before = 0; struct mlx5e_encap_entry *e; struct mlx5e_encap_key key; @@ -760,6 +761,7 @@ int mlx5e_attach_encap(struct mlx5e_priv *priv, parse_attr = attr->parse_attr; tun_info = parse_attr->tun_info[out_index]; + mpls_info = &parse_attr->mpls_info[out_index]; family = ip_tunnel_info_af(tun_info); key.ip_tun_key = &tun_info->key; key.tc_tunnel = mlx5e_get_tc_tun(mirred_dev); @@ -810,6 +812,7 @@ int mlx5e_attach_encap(struct mlx5e_priv *priv, goto out_err_init; } e->tun_info = tun_info; + memcpy(&e->mpls_info, mpls_info, sizeof(*mpls_info)); err = mlx5e_tc_tun_init_encap_attr(mirred_dev, priv, e, extack); if (err) goto out_err_init; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_mplsoudp.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_mplsoudp.c index 60952b33b56888..f40dbfcb643759 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_mplsoudp.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_mplsoudp.c @@ -30,16 +30,15 @@ static int generate_ip_tun_hdr(char buf[], struct mlx5e_encap_entry *r) { const struct ip_tunnel_key *tun_key = &r->tun_info->key; + const struct mlx5e_mpls_info *mpls_info = &r->mpls_info; struct udphdr *udp = (struct udphdr *)(buf); struct mpls_shim_hdr *mpls; - u32 tun_id; - tun_id = be32_to_cpu(tunnel_id_to_key32(tun_key->tun_id)); mpls = (struct mpls_shim_hdr *)(udp + 1); *ip_proto = IPPROTO_UDP; udp->dest = tun_key->tp_dst; - *mpls = mpls_entry_encode(tun_id, tun_key->ttl, tun_key->tos, true); + *mpls = mpls_entry_encode(mpls_info->label, mpls_info->ttl, mpls_info->tc, mpls_info->bos); return 0; } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.h b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.h index b01dacb6f527c8..b3f7520dfd0845 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.h @@ -183,6 +183,13 @@ struct mlx5e_decap_entry { struct rcu_head rcu; }; +struct mlx5e_mpls_info { + u32 label; + u8 tc; + u8 bos; + u8 ttl; +}; + struct mlx5e_encap_entry { /* attached neigh hash entry */ struct mlx5e_neigh_hash_entry *nhe; @@ -196,6 +203,7 @@ struct mlx5e_encap_entry { struct list_head route_list; struct mlx5_pkt_reformat *pkt_reformat; const struct ip_tunnel_info *tun_info; + struct mlx5e_mpls_info mpls_info; unsigned char h_dest[ETH_ALEN]; /* destination eth addr */ struct net_device *out_dev; From fdc18e4e4bded2a08638cdcd22dc087a64b9ddad Mon Sep 17 00:00:00 2001 From: Maor Dickman Date: Thu, 6 Jan 2022 14:46:24 +0200 Subject: [PATCH 444/493] net/mlx5e: MPLSoUDP decap, fix check for unsupported matches Currently offload of rule on bareudp device require tunnel key in order to match on mpls fields and without it the mpls fields are ignored, this is incorrect due to the fact udp tunnel doesn't have key to match on. Fix by returning error in case flow is matching on tunnel key. Fixes: 72046a91d134 ("net/mlx5e: Allow to match on mpls parameters") Signed-off-by: Maor Dickman Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed --- .../mellanox/mlx5/core/en/tc_tun_mplsoudp.c | 28 ++++++++----------- 1 file changed, 11 insertions(+), 17 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_mplsoudp.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_mplsoudp.c index f40dbfcb643759..c5b1617d556fe0 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_mplsoudp.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_mplsoudp.c @@ -59,37 +59,31 @@ static int parse_tunnel(struct mlx5e_priv *priv, void *headers_v) { struct flow_rule *rule = flow_cls_offload_flow_rule(f); - struct flow_match_enc_keyid enc_keyid; struct flow_match_mpls match; void *misc2_c; void *misc2_v; - misc2_c = MLX5_ADDR_OF(fte_match_param, spec->match_criteria, - misc_parameters_2); - misc2_v = MLX5_ADDR_OF(fte_match_param, spec->match_value, - misc_parameters_2); - - if (!flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_MPLS)) - return 0; - - if (!flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ENC_KEYID)) - return 0; - - flow_rule_match_enc_keyid(rule, &enc_keyid); - - if (!enc_keyid.mask->keyid) - return 0; - if (!MLX5_CAP_ETH(priv->mdev, tunnel_stateless_mpls_over_udp) && !(MLX5_CAP_GEN(priv->mdev, flex_parser_protocols) & MLX5_FLEX_PROTO_CW_MPLS_UDP)) return -EOPNOTSUPP; + if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ENC_KEYID)) + return -EOPNOTSUPP; + + if (!flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_MPLS)) + return 0; + flow_rule_match_mpls(rule, &match); /* Only support matching the first LSE */ if (match.mask->used_lses != 1) return -EOPNOTSUPP; + misc2_c = MLX5_ADDR_OF(fte_match_param, spec->match_criteria, + misc_parameters_2); + misc2_v = MLX5_ADDR_OF(fte_match_param, spec->match_value, + misc_parameters_2); + MLX5_SET(fte_match_set_misc2, misc2_c, outer_first_mpls_over_udp.mpls_label, match.mask->ls[0].mpls_label); From 5ee02b7a800654ff9549807bcf0b4c9fd5cf25f9 Mon Sep 17 00:00:00 2001 From: Lama Kayal Date: Mon, 21 Feb 2022 12:26:11 +0200 Subject: [PATCH 445/493] net/mlx5e: Add missing increment of count Add mistakenly missing increment of count variable when looping over output buffer in mlx5e_self_test(). This resolves the issue of garbage values output when querying with self test via ethtool. before: $ ethtool -t eth2 The test result is PASS The test extra info: Link Test 0 Speed Test 1768697188 Health Test 758528120 Loopback Test 3288687 after: $ ethtool -t eth2 The test result is PASS The test extra info: Link Test 0 Speed Test 0 Health Test 0 Loopback Test 0 Fixes: 7990b1b5e8bd ("net/mlx5e: loopback test is not supported in switchdev mode") Signed-off-by: Lama Kayal Reviewed-by: Gal Pressman Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_selftest.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_selftest.c b/drivers/net/ethernet/mellanox/mlx5/core/en_selftest.c index 8c9163d2c64684..08a75654f5f188 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_selftest.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_selftest.c @@ -334,6 +334,7 @@ void mlx5e_self_test(struct net_device *ndev, struct ethtool_test *etest, netdev_info(ndev, "\t[%d] %s start..\n", i, st.name); buf[count] = st.st_func(priv); netdev_info(ndev, "\t[%d] %s end: result(%lld)\n", i, st.name, buf[count]); + count++; } mutex_unlock(&priv->state_lock); From ca49df96f9f5efd4f0f1e64f7c4c0c63a3329cb9 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Mon, 21 Feb 2022 17:54:34 +0200 Subject: [PATCH 446/493] net/mlx5e: Fix VF min/max rate parameters interchange mistake The VF min and max rate were passed incorrectly and resulted in wrongly interchanging them. Fix the order of parameters in mlx5_esw_qos_set_vport_rate(). Fixes: d7df09f5e7b4 ("net/mlx5: E-switch, Enable vport QoS on demand") Signed-off-by: Gal Pressman Reviewed-by: Aya Levin Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c b/drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c index 11bbcd5f5b8b9c..694c540669550a 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c @@ -697,7 +697,7 @@ void mlx5_esw_qos_vport_disable(struct mlx5_eswitch *esw, struct mlx5_vport *vpo } int mlx5_esw_qos_set_vport_rate(struct mlx5_eswitch *esw, struct mlx5_vport *vport, - u32 min_rate, u32 max_rate) + u32 max_rate, u32 min_rate) { int err; From 7414db411919980bc4c9bab11d5d040b5dd7667c Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Wed, 23 Feb 2022 14:18:31 -0300 Subject: [PATCH 447/493] rtla: Fix systme -> system typo on man page Link: https://lkml.kernel.org/r/YhZsZxqk+IaFxorj@kernel.org Fixes: 496082df01bb08a4 ("rtla: Add rtla osnoise man page") Signed-off-by: Arnaldo Carvalho de Melo Acked-by: Daniel Bristot de Oliveira Signed-off-by: Steven Rostedt (Google) --- Documentation/tools/rtla/common_osnoise_description.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/tools/rtla/common_osnoise_description.rst b/Documentation/tools/rtla/common_osnoise_description.rst index 8973c5df888f63..d5d61615b96709 100644 --- a/Documentation/tools/rtla/common_osnoise_description.rst +++ b/Documentation/tools/rtla/common_osnoise_description.rst @@ -1,7 +1,7 @@ The **rtla osnoise** tool is an interface for the *osnoise* tracer. The *osnoise* tracer dispatches a kernel thread per-cpu. These threads read the time in a loop while with preemption, softirq and IRQs enabled, thus -allowing all the sources of operating systme noise during its execution. +allowing all the sources of operating system noise during its execution. The *osnoise*'s tracer threads take note of the delta between each time read, along with an interference counter of all sources of interference. At the end of each period, the *osnoise* tracer displays a summary of From 7f14c7227f342d9932f9b918893c8814f86d2a0d Mon Sep 17 00:00:00 2001 From: Szymon Heidrich Date: Mon, 21 Feb 2022 13:24:56 +0100 Subject: [PATCH 448/493] USB: gadget: validate endpoint index for xilinx udc Assure that host may not manipulate the index to point past endpoint array. Signed-off-by: Szymon Heidrich Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/udc/udc-xilinx.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/gadget/udc/udc-xilinx.c b/drivers/usb/gadget/udc/udc-xilinx.c index 6ce886fb7bfedd..2907fad04e2c14 100644 --- a/drivers/usb/gadget/udc/udc-xilinx.c +++ b/drivers/usb/gadget/udc/udc-xilinx.c @@ -1615,6 +1615,8 @@ static void xudc_getstatus(struct xusb_udc *udc) break; case USB_RECIP_ENDPOINT: epnum = udc->setup.wIndex & USB_ENDPOINT_NUMBER_MASK; + if (epnum >= XUSB_MAX_ENDPOINTS) + goto stall; target_ep = &udc->ep[epnum]; epcfgreg = udc->read_fn(udc->addr + target_ep->offset); halt = epcfgreg & XUSB_EP_CFG_STALL_MASK; @@ -1682,6 +1684,10 @@ static void xudc_set_clear_feature(struct xusb_udc *udc) case USB_RECIP_ENDPOINT: if (!udc->setup.wValue) { endpoint = udc->setup.wIndex & USB_ENDPOINT_NUMBER_MASK; + if (endpoint >= XUSB_MAX_ENDPOINTS) { + xudc_ep0_stall(udc); + return; + } target_ep = &udc->ep[endpoint]; outinbit = udc->setup.wIndex & USB_ENDPOINT_DIR_MASK; outinbit = outinbit >> 7; From 84918a89d6efaff075de570b55642b6f4ceeac6d Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Fri, 18 Feb 2022 18:32:45 +0100 Subject: [PATCH 449/493] usb: dwc3: gadget: Let the interrupt handler disable bottom halves. The interrupt service routine registered for the gadget is a primary handler which mask the interrupt source and a threaded handler which handles the source of the interrupt. Since the threaded handler is voluntary threaded, the IRQ-core does not disable bottom halves before invoke the handler like it does for the forced-threaded handler. Due to changes in networking it became visible that a network gadget's completions handler may schedule a softirq which remains unprocessed. The gadget's completion handler is usually invoked either in hard-IRQ or soft-IRQ context. In this context it is enough to just raise the softirq because the softirq itself will be handled once that context is left. In the case of the voluntary threaded handler, there is nothing that will process pending softirqs. Which means it remain queued until another random interrupt (on this CPU) fires and handles it on its exit path or another thread locks and unlocks a lock with the bh suffix. Worst case is that the CPU goes idle and the NOHZ complains about unhandled softirqs. Disable bottom halves before acquiring the lock (and disabling interrupts) and enable them after dropping the lock. This ensures that any pending softirqs will handled right away. Link: https://lkml.kernel.org/r/c2a64979-73d1-2c22-e048-c275c9f81558@samsung.com Fixes: e5f68b4a3e7b0 ("Revert "usb: dwc3: gadget: remove unnecessary _irqsave()"") Cc: stable Reported-by: Marek Szyprowski Tested-by: Marek Szyprowski Signed-off-by: Sebastian Andrzej Siewior Link: https://lore.kernel.org/r/Yg/YPejVQH3KkRVd@linutronix.de Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/gadget.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 183b90923f51ba..a0c883f19a417c 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -4160,9 +4160,11 @@ static irqreturn_t dwc3_thread_interrupt(int irq, void *_evt) unsigned long flags; irqreturn_t ret = IRQ_NONE; + local_bh_disable(); spin_lock_irqsave(&dwc->lock, flags); ret = dwc3_process_event_buf(evt); spin_unlock_irqrestore(&dwc->lock, flags); + local_bh_enable(); return ret; } From aaaba1c86d04dac8e49bf508b492f81506257da3 Mon Sep 17 00:00:00 2001 From: Daehwan Jung Date: Tue, 22 Feb 2022 14:29:28 +0900 Subject: [PATCH 450/493] usb: gadget: rndis: add spinlock for rndis response list There's no lock for rndis response list. It could cause list corruption if there're two different list_add at the same time like below. It's better to add in rndis_add_response / rndis_free_response / rndis_get_next_response to prevent any race condition on response list. [ 361.894299] [1: irq/191-dwc3:16979] list_add corruption. next->prev should be prev (ffffff80651764d0), but was ffffff883dc36f80. (next=ffffff80651764d0). [ 361.904380] [1: irq/191-dwc3:16979] Call trace: [ 361.904391] [1: irq/191-dwc3:16979] __list_add_valid+0x74/0x90 [ 361.904401] [1: irq/191-dwc3:16979] rndis_msg_parser+0x168/0x8c0 [ 361.904409] [1: irq/191-dwc3:16979] rndis_command_complete+0x24/0x84 [ 361.904417] [1: irq/191-dwc3:16979] usb_gadget_giveback_request+0x20/0xe4 [ 361.904426] [1: irq/191-dwc3:16979] dwc3_gadget_giveback+0x44/0x60 [ 361.904434] [1: irq/191-dwc3:16979] dwc3_ep0_complete_data+0x1e8/0x3a0 [ 361.904442] [1: irq/191-dwc3:16979] dwc3_ep0_interrupt+0x29c/0x3dc [ 361.904450] [1: irq/191-dwc3:16979] dwc3_process_event_entry+0x78/0x6cc [ 361.904457] [1: irq/191-dwc3:16979] dwc3_process_event_buf+0xa0/0x1ec [ 361.904465] [1: irq/191-dwc3:16979] dwc3_thread_interrupt+0x34/0x5c Fixes: f6281af9d62e ("usb: gadget: rndis: use list_for_each_entry_safe") Cc: stable Signed-off-by: Daehwan Jung Link: https://lore.kernel.org/r/1645507768-77687-1-git-send-email-dh10.jung@samsung.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/function/rndis.c | 8 ++++++++ drivers/usb/gadget/function/rndis.h | 1 + 2 files changed, 9 insertions(+) diff --git a/drivers/usb/gadget/function/rndis.c b/drivers/usb/gadget/function/rndis.c index b7ccf18036568a..00b3f6b3bb31df 100644 --- a/drivers/usb/gadget/function/rndis.c +++ b/drivers/usb/gadget/function/rndis.c @@ -922,6 +922,7 @@ struct rndis_params *rndis_register(void (*resp_avail)(void *v), void *v) params->resp_avail = resp_avail; params->v = v; INIT_LIST_HEAD(¶ms->resp_queue); + spin_lock_init(¶ms->resp_lock); pr_debug("%s: configNr = %d\n", __func__, i); return params; @@ -1015,12 +1016,14 @@ void rndis_free_response(struct rndis_params *params, u8 *buf) { rndis_resp_t *r, *n; + spin_lock(¶ms->resp_lock); list_for_each_entry_safe(r, n, ¶ms->resp_queue, list) { if (r->buf == buf) { list_del(&r->list); kfree(r); } } + spin_unlock(¶ms->resp_lock); } EXPORT_SYMBOL_GPL(rndis_free_response); @@ -1030,14 +1033,17 @@ u8 *rndis_get_next_response(struct rndis_params *params, u32 *length) if (!length) return NULL; + spin_lock(¶ms->resp_lock); list_for_each_entry_safe(r, n, ¶ms->resp_queue, list) { if (!r->send) { r->send = 1; *length = r->length; + spin_unlock(¶ms->resp_lock); return r->buf; } } + spin_unlock(¶ms->resp_lock); return NULL; } EXPORT_SYMBOL_GPL(rndis_get_next_response); @@ -1054,7 +1060,9 @@ static rndis_resp_t *rndis_add_response(struct rndis_params *params, u32 length) r->length = length; r->send = 0; + spin_lock(¶ms->resp_lock); list_add_tail(&r->list, ¶ms->resp_queue); + spin_unlock(¶ms->resp_lock); return r; } diff --git a/drivers/usb/gadget/function/rndis.h b/drivers/usb/gadget/function/rndis.h index f6167f7fea82b5..6206b8b7490f64 100644 --- a/drivers/usb/gadget/function/rndis.h +++ b/drivers/usb/gadget/function/rndis.h @@ -174,6 +174,7 @@ typedef struct rndis_params { void (*resp_avail)(void *v); void *v; struct list_head resp_queue; + spinlock_t resp_lock; } rndis_params; /* RNDIS Message parser and other useless functions */ From 68af28426b3ca1bf9ba21c7d8bdd0ff639e5134c Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Wed, 23 Feb 2022 11:52:37 -0600 Subject: [PATCH 451/493] platform/x86: amd-pmc: Set QOS during suspend on CZN w/ timer wakeup commit 59348401ebed ("platform/x86: amd-pmc: Add special handling for timer based S0i3 wakeup") adds support for using another platform timer in lieu of the RTC which doesn't work properly on some systems. This path was validated and worked well before submission. During the 5.16-rc1 merge window other patches were merged that caused this to stop working properly. When this feature was used with 5.16-rc1 or later some OEM laptops with the matching firmware requirements from that commit would shutdown instead of program a timer based wakeup. This was bisected to commit 8d89835b0467 ("PM: suspend: Do not pause cpuidle in the suspend-to-idle path"). This wasn't supposed to cause any negative impacts and also tested well on both Intel and ARM platforms. However this changed the semantics of when CPUs are allowed to be in the deepest state. For the AMD systems in question it appears this causes a firmware crash for timer based wakeup. It's hypothesized to be caused by the `amd-pmc` driver sending `OS_HINT` and all the CPUs going into a deep state while the timer is still being programmed. It's likely a firmware bug, but to avoid it don't allow setting CPUs into the deepest state while using CZN timer wakeup path. If later it's discovered that this also occurs from "regular" suspends without a timer as well or on other silicon, this may be later expanded to run in the suspend path for more scenarios. Cc: stable@vger.kernel.org # 5.16+ Suggested-by: Rafael J. Wysocki Link: https://lore.kernel.org/linux-acpi/BL1PR12MB51570F5BD05980A0DCA1F3F4E23A9@BL1PR12MB5157.namprd12.prod.outlook.com/T/#mee35f39c41a04b624700ab2621c795367f19c90e Fixes: 8d89835b0467 ("PM: suspend: Do not pause cpuidle in the suspend-to-idle path") Fixes: 23f62d7ab25b ("PM: sleep: Pause cpuidle later and resume it earlier during system transitions") Fixes: 59348401ebed ("platform/x86: amd-pmc: Add special handling for timer based S0i3 wakeup" Reviewed-by: Rafael J. Wysocki Signed-off-by: Mario Limonciello Link: https://lore.kernel.org/r/20220223175237.6209-1-mario.limonciello@amd.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede --- drivers/platform/x86/amd-pmc.c | 42 ++++++++++++++++++++++++++-------- 1 file changed, 33 insertions(+), 9 deletions(-) diff --git a/drivers/platform/x86/amd-pmc.c b/drivers/platform/x86/amd-pmc.c index 4c72ba68b315bb..b1103f85a85a0d 100644 --- a/drivers/platform/x86/amd-pmc.c +++ b/drivers/platform/x86/amd-pmc.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -85,6 +86,9 @@ #define PMC_MSG_DELAY_MIN_US 50 #define RESPONSE_REGISTER_LOOP_MAX 20000 +/* QoS request for letting CPUs in idle states, but not the deepest */ +#define AMD_PMC_MAX_IDLE_STATE_LATENCY 3 + #define SOC_SUBSYSTEM_IP_MAX 12 #define DELAY_MIN_US 2000 #define DELAY_MAX_US 3000 @@ -131,6 +135,7 @@ struct amd_pmc_dev { struct device *dev; struct pci_dev *rdev; struct mutex lock; /* generic mutex lock */ + struct pm_qos_request amd_pmc_pm_qos_req; #if IS_ENABLED(CONFIG_DEBUG_FS) struct dentry *dbgfs_dir; #endif /* CONFIG_DEBUG_FS */ @@ -521,6 +526,14 @@ static int amd_pmc_verify_czn_rtc(struct amd_pmc_dev *pdev, u32 *arg) rc = rtc_alarm_irq_enable(rtc_device, 0); dev_dbg(pdev->dev, "wakeup timer programmed for %lld seconds\n", duration); + /* + * Prevent CPUs from getting into deep idle states while sending OS_HINT + * which is otherwise generally safe to send when at least one of the CPUs + * is not in deep idle states. + */ + cpu_latency_qos_update_request(&pdev->amd_pmc_pm_qos_req, AMD_PMC_MAX_IDLE_STATE_LATENCY); + wake_up_all_idle_cpus(); + return rc; } @@ -538,24 +551,31 @@ static int __maybe_unused amd_pmc_suspend(struct device *dev) /* Activate CZN specific RTC functionality */ if (pdev->cpu_id == AMD_CPU_ID_CZN) { rc = amd_pmc_verify_czn_rtc(pdev, &arg); - if (rc < 0) - return rc; + if (rc) + goto fail; } /* Dump the IdleMask before we send hint to SMU */ amd_pmc_idlemask_read(pdev, dev, NULL); msg = amd_pmc_get_os_hint(pdev); rc = amd_pmc_send_cmd(pdev, arg, NULL, msg, 0); - if (rc) + if (rc) { dev_err(pdev->dev, "suspend failed\n"); + goto fail; + } if (enable_stb) rc = amd_pmc_write_stb(pdev, AMD_PMC_STB_PREDEF); - if (rc) { + if (rc) { dev_err(pdev->dev, "error writing to STB\n"); - return rc; + goto fail; } + return 0; +fail: + if (pdev->cpu_id == AMD_CPU_ID_CZN) + cpu_latency_qos_update_request(&pdev->amd_pmc_pm_qos_req, + PM_QOS_DEFAULT_VALUE); return rc; } @@ -579,12 +599,15 @@ static int __maybe_unused amd_pmc_resume(struct device *dev) /* Write data incremented by 1 to distinguish in stb_read */ if (enable_stb) rc = amd_pmc_write_stb(pdev, AMD_PMC_STB_PREDEF + 1); - if (rc) { + if (rc) dev_err(pdev->dev, "error writing to STB\n"); - return rc; - } - return 0; + /* Restore the QoS request back to defaults if it was set */ + if (pdev->cpu_id == AMD_CPU_ID_CZN) + cpu_latency_qos_update_request(&pdev->amd_pmc_pm_qos_req, + PM_QOS_DEFAULT_VALUE); + + return rc; } static const struct dev_pm_ops amd_pmc_pm_ops = { @@ -722,6 +745,7 @@ static int amd_pmc_probe(struct platform_device *pdev) amd_pmc_get_smu_version(dev); platform_set_drvdata(pdev, dev); amd_pmc_dbgfs_register(dev); + cpu_latency_qos_add_request(&dev->amd_pmc_pm_qos_req, PM_QOS_DEFAULT_VALUE); return 0; err_pci_dev_put: From 21d90aaee8d5c2a097ef41f1430d97661233ecc6 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 24 Feb 2022 11:18:48 +0100 Subject: [PATCH 452/493] surface: surface3_power: Fix battery readings on batteries without a serial number The battery on the 2nd hand Surface 3 which I recently bought appears to not have a serial number programmed in. This results in any I2C reads from the registers containing the serial number failing with an I2C NACK. This was causing mshw0011_bix() to fail causing the battery readings to not work at all. Ignore EREMOTEIO (I2C NACK) errors when retrieving the serial number and continue with an empty serial number to fix this. Fixes: b1f81b496b0d ("platform/x86: surface3_power: MSHW0011 rev-eng implementation") BugLink: https://github.com/linux-surface/linux-surface/issues/608 Reviewed-by: Benjamin Tissoires Reviewed-by: Maximilian Luz Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20220224101848.7219-1-hdegoede@redhat.com --- drivers/platform/surface/surface3_power.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/platform/surface/surface3_power.c b/drivers/platform/surface/surface3_power.c index abac3eec565e87..444ec81ba02d78 100644 --- a/drivers/platform/surface/surface3_power.c +++ b/drivers/platform/surface/surface3_power.c @@ -232,14 +232,21 @@ static int mshw0011_bix(struct mshw0011_data *cdata, struct bix *bix) } bix->last_full_charg_capacity = ret; - /* get serial number */ + /* + * Get serial number, on some devices (with unofficial replacement + * battery?) reading any of the serial number range addresses gets + * nacked in this case just leave the serial number empty. + */ ret = i2c_smbus_read_i2c_block_data(client, MSHW0011_BAT0_REG_SERIAL_NO, sizeof(buf), buf); - if (ret != sizeof(buf)) { + if (ret == -EREMOTEIO) { + /* no serial number available */ + } else if (ret != sizeof(buf)) { dev_err(&client->dev, "Error reading serial no: %d\n", ret); return ret; + } else { + snprintf(bix->serial, ARRAY_SIZE(bix->serial), "%3pE%6pE", buf + 7, buf); } - snprintf(bix->serial, ARRAY_SIZE(bix->serial), "%3pE%6pE", buf + 7, buf); /* get cycle count */ ret = i2c_smbus_read_word_data(client, MSHW0011_BAT0_REG_CYCLE_CNT); From 558732df2122092259ab4ef85594bee11dbb9104 Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Sun, 13 Feb 2022 15:42:33 +0800 Subject: [PATCH 453/493] btrfs: reduce extent threshold for autodefrag There is a big gap between inode_should_defrag() and autodefrag extent size threshold. For inode_should_defrag() it has a flexible @small_write value. For compressed extent is 16K, and for non-compressed extent it's 64K. However for autodefrag extent size threshold, it's always fixed to the default value (256K). This means, the following write sequence will trigger autodefrag to defrag ranges which didn't trigger autodefrag: pwrite 0 8k sync pwrite 8k 128K sync The latter 128K write will also be considered as a defrag target (if other conditions are met). While only that 8K write is really triggering autodefrag. Such behavior can cause extra IO for autodefrag. Close the gap, by copying the @small_write value into inode_defrag, so that later autodefrag can use the same @small_write value which triggered autodefrag. With the existing transid value, this allows autodefrag really to scan the ranges which triggered autodefrag. Although this behavior change is mostly reducing the extent_thresh value for autodefrag, I believe in the future we should allow users to specify the autodefrag extent threshold through mount options, but that's an other problem to consider in the future. CC: stable@vger.kernel.org # 5.16+ Signed-off-by: Qu Wenruo Signed-off-by: David Sterba --- fs/btrfs/ctree.h | 2 +- fs/btrfs/file.c | 15 ++++++++++++++- fs/btrfs/inode.c | 4 ++-- 3 files changed, 17 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 8992e0096163e2..947f04789389e9 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -3291,7 +3291,7 @@ void btrfs_exclop_balance(struct btrfs_fs_info *fs_info, int __init btrfs_auto_defrag_init(void); void __cold btrfs_auto_defrag_exit(void); int btrfs_add_inode_defrag(struct btrfs_trans_handle *trans, - struct btrfs_inode *inode); + struct btrfs_inode *inode, u32 extent_thresh); int btrfs_run_defrag_inodes(struct btrfs_fs_info *fs_info); void btrfs_cleanup_defrag_inodes(struct btrfs_fs_info *fs_info); int btrfs_sync_file(struct file *file, loff_t start, loff_t end, int datasync); diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 36a81368ed46d4..a0179cc62913ba 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -49,6 +49,15 @@ struct inode_defrag { /* root objectid */ u64 root; + + /* + * The extent size threshold for autodefrag. + * + * This value is different for compressed/non-compressed extents, + * thus needs to be passed from higher layer. + * (aka, inode_should_defrag()) + */ + u32 extent_thresh; }; static int __compare_inode_defrag(struct inode_defrag *defrag1, @@ -101,6 +110,8 @@ static int __btrfs_add_inode_defrag(struct btrfs_inode *inode, */ if (defrag->transid < entry->transid) entry->transid = defrag->transid; + entry->extent_thresh = min(defrag->extent_thresh, + entry->extent_thresh); return -EEXIST; } } @@ -126,7 +137,7 @@ static inline int __need_auto_defrag(struct btrfs_fs_info *fs_info) * enabled */ int btrfs_add_inode_defrag(struct btrfs_trans_handle *trans, - struct btrfs_inode *inode) + struct btrfs_inode *inode, u32 extent_thresh) { struct btrfs_root *root = inode->root; struct btrfs_fs_info *fs_info = root->fs_info; @@ -152,6 +163,7 @@ int btrfs_add_inode_defrag(struct btrfs_trans_handle *trans, defrag->ino = btrfs_ino(inode); defrag->transid = transid; defrag->root = root->root_key.objectid; + defrag->extent_thresh = extent_thresh; spin_lock(&fs_info->defrag_inodes_lock); if (!test_bit(BTRFS_INODE_IN_DEFRAG, &inode->runtime_flags)) { @@ -275,6 +287,7 @@ static int __btrfs_run_defrag_inode(struct btrfs_fs_info *fs_info, memset(&range, 0, sizeof(range)); range.len = (u64)-1; range.start = cur; + range.extent_thresh = defrag->extent_thresh; sb_start_write(fs_info->sb); ret = btrfs_defrag_file(inode, NULL, &range, defrag->transid, diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 3b2403b6127ff9..76e530f76e3cf2 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -560,12 +560,12 @@ static inline int inode_need_compress(struct btrfs_inode *inode, u64 start, } static inline void inode_should_defrag(struct btrfs_inode *inode, - u64 start, u64 end, u64 num_bytes, u64 small_write) + u64 start, u64 end, u64 num_bytes, u32 small_write) { /* If this is a small write inside eof, kick off a defrag */ if (num_bytes < small_write && (start > 0 || end + 1 < inode->disk_i_size)) - btrfs_add_inode_defrag(NULL, inode); + btrfs_add_inode_defrag(NULL, inode, small_write); } /* From 0f4558ae91870692ce7f509c31c9d6ee721d8cdc Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Marczykowski-G=C3=B3recki?= Date: Tue, 22 Feb 2022 01:18:16 +0100 Subject: [PATCH 454/493] Revert "xen-netback: remove 'hotplug-status' once it has served its purpose" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 1f2565780e9b7218cf92c7630130e82dcc0fe9c2. The 'hotplug-status' node should not be removed as long as the vif device remains configured. Otherwise the xen-netback would wait for re-running the network script even if it was already called (in case of the frontent re-connecting). But also, it _should_ be removed when the vif device is destroyed (for example when unbinding the driver) - otherwise hotplug script would not configure the device whenever it re-appear. Moving removal of the 'hotplug-status' node was a workaround for nothing calling network script after xen-netback module is reloaded. But when vif interface is re-created (on xen-netback unbind/bind for example), the script should be called, regardless of who does that - currently this case is not handled by the toolstack, and requires manual script call. Keeping hotplug-status=connected to skip the call is wrong and leads to not configured interface. More discussion at https://lore.kernel.org/xen-devel/afedd7cb-a291-e773-8b0d-4db9b291fa98@ipxe.org/T/#u Signed-off-by: Marek Marczykowski-Górecki Reviewed-by: Paul Durrant Link: https://lore.kernel.org/r/20220222001817.2264967-1-marmarek@invisiblethingslab.com Signed-off-by: Jakub Kicinski --- drivers/net/xen-netback/xenbus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/xen-netback/xenbus.c b/drivers/net/xen-netback/xenbus.c index d24b7a7993aa05..3fad58d22155b7 100644 --- a/drivers/net/xen-netback/xenbus.c +++ b/drivers/net/xen-netback/xenbus.c @@ -256,6 +256,7 @@ static void backend_disconnect(struct backend_info *be) unsigned int queue_index; xen_unregister_watchers(vif); + xenbus_rm(XBT_NIL, be->dev->nodename, "hotplug-status"); #ifdef CONFIG_DEBUG_FS xenvif_debugfs_delif(vif); #endif /* CONFIG_DEBUG_FS */ @@ -675,7 +676,6 @@ static void hotplug_status_changed(struct xenbus_watch *watch, /* Not interested in this watch anymore. */ unregister_hotplug_status_watch(be); - xenbus_rm(XBT_NIL, be->dev->nodename, "hotplug-status"); } kfree(str); } From e8240addd0a3919e0fd7436416afe9aa6429c484 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Marczykowski-G=C3=B3recki?= Date: Tue, 22 Feb 2022 01:18:17 +0100 Subject: [PATCH 455/493] Revert "xen-netback: Check for hotplug-status existence before watching" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 2afeec08ab5c86ae21952151f726bfe184f6b23d. The reasoning in the commit was wrong - the code expected to setup the watch even if 'hotplug-status' didn't exist. In fact, it relied on the watch being fired the first time - to check if maybe 'hotplug-status' is already set to 'connected'. Not registering a watch for non-existing path (which is the case if hotplug script hasn't been executed yet), made the backend not waiting for the hotplug script to execute. This in turns, made the netfront think the interface is fully operational, while in fact it was not (the vif interface on xen-netback side might not be configured yet). This was a workaround for 'hotplug-status' erroneously being removed. But since that is reverted now, the workaround is not necessary either. More discussion at https://lore.kernel.org/xen-devel/afedd7cb-a291-e773-8b0d-4db9b291fa98@ipxe.org/T/#u Signed-off-by: Marek Marczykowski-Górecki Reviewed-by: Paul Durrant Reviewed-by: Michael Brown Link: https://lore.kernel.org/r/20220222001817.2264967-2-marmarek@invisiblethingslab.com Signed-off-by: Jakub Kicinski --- drivers/net/xen-netback/xenbus.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/net/xen-netback/xenbus.c b/drivers/net/xen-netback/xenbus.c index 3fad58d22155b7..990360d75cb648 100644 --- a/drivers/net/xen-netback/xenbus.c +++ b/drivers/net/xen-netback/xenbus.c @@ -824,15 +824,11 @@ static void connect(struct backend_info *be) xenvif_carrier_on(be->vif); unregister_hotplug_status_watch(be); - if (xenbus_exists(XBT_NIL, dev->nodename, "hotplug-status")) { - err = xenbus_watch_pathfmt(dev, &be->hotplug_status_watch, - NULL, hotplug_status_changed, - "%s/%s", dev->nodename, - "hotplug-status"); - if (err) - goto err; + err = xenbus_watch_pathfmt(dev, &be->hotplug_status_watch, NULL, + hotplug_status_changed, + "%s/%s", dev->nodename, "hotplug-status"); + if (!err) be->have_hotplug_status_watch = 1; - } netif_tx_wake_all_queues(be->vif->dev); From e13ad1443684f7afaff24cf207e85e97885256bd Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Wed, 23 Feb 2022 00:57:20 -0800 Subject: [PATCH 456/493] bnx2x: fix driver load from initrd Commit b7a49f73059f ("bnx2x: Utilize firmware 7.13.21.0") added new firmware support in the driver with maintaining older firmware compatibility. However, older firmware was not added in MODULE_FIRMWARE() which caused missing firmware files in initrd image leading to driver load failure from initrd. This patch adds MODULE_FIRMWARE() for older firmware version to have firmware files included in initrd. Fixes: b7a49f73059f ("bnx2x: Utilize firmware 7.13.21.0") Link: https://bugzilla.kernel.org/show_bug.cgi?id=215627 Signed-off-by: Manish Chopra Signed-off-by: Alok Prasad Signed-off-by: Ariel Elior Link: https://lore.kernel.org/r/20220223085720.12021-1-manishc@marvell.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 774c1f1a57c3a6..eedb48d945ed05 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -100,6 +100,9 @@ MODULE_LICENSE("GPL"); MODULE_FIRMWARE(FW_FILE_NAME_E1); MODULE_FIRMWARE(FW_FILE_NAME_E1H); MODULE_FIRMWARE(FW_FILE_NAME_E2); +MODULE_FIRMWARE(FW_FILE_NAME_E1_V15); +MODULE_FIRMWARE(FW_FILE_NAME_E1H_V15); +MODULE_FIRMWARE(FW_FILE_NAME_E2_V15); int bnx2x_num_queues; module_param_named(num_queues, bnx2x_num_queues, int, 0444); From 7ff57e98fb78ad94edafbdc7435f2d745e9e6bb5 Mon Sep 17 00:00:00 2001 From: "Fabio M. De Francesco" Date: Wed, 23 Feb 2022 11:02:52 +0100 Subject: [PATCH 457/493] net/smc: Use a mutex for locking "struct smc_pnettable" smc_pnetid_by_table_ib() uses read_lock() and then it calls smc_pnet_apply_ib() which, in turn, calls mutex_lock(&smc_ib_devices.mutex). read_lock() disables preemption. Therefore, the code acquires a mutex while in atomic context and it leads to a SAC bug. Fix this bug by replacing the rwlock with a mutex. Reported-and-tested-by: syzbot+4f322a6d84e991c38775@syzkaller.appspotmail.com Fixes: 64e28b52c7a6 ("net/smc: add pnet table namespace support") Confirmed-by: Tony Lu Signed-off-by: Fabio M. De Francesco Acked-by: Karsten Graul Link: https://lore.kernel.org/r/20220223100252.22562-1-fmdefrancesco@gmail.com Signed-off-by: Jakub Kicinski --- net/smc/smc_pnet.c | 42 +++++++++++++++++++++--------------------- net/smc/smc_pnet.h | 2 +- 2 files changed, 22 insertions(+), 22 deletions(-) diff --git a/net/smc/smc_pnet.c b/net/smc/smc_pnet.c index 0599246c037690..29f0a559d88478 100644 --- a/net/smc/smc_pnet.c +++ b/net/smc/smc_pnet.c @@ -113,7 +113,7 @@ static int smc_pnet_remove_by_pnetid(struct net *net, char *pnet_name) pnettable = &sn->pnettable; /* remove table entry */ - write_lock(&pnettable->lock); + mutex_lock(&pnettable->lock); list_for_each_entry_safe(pnetelem, tmp_pe, &pnettable->pnetlist, list) { if (!pnet_name || @@ -131,7 +131,7 @@ static int smc_pnet_remove_by_pnetid(struct net *net, char *pnet_name) rc = 0; } } - write_unlock(&pnettable->lock); + mutex_unlock(&pnettable->lock); /* if this is not the initial namespace, stop here */ if (net != &init_net) @@ -192,7 +192,7 @@ static int smc_pnet_add_by_ndev(struct net_device *ndev) sn = net_generic(net, smc_net_id); pnettable = &sn->pnettable; - write_lock(&pnettable->lock); + mutex_lock(&pnettable->lock); list_for_each_entry_safe(pnetelem, tmp_pe, &pnettable->pnetlist, list) { if (pnetelem->type == SMC_PNET_ETH && !pnetelem->ndev && !strncmp(pnetelem->eth_name, ndev->name, IFNAMSIZ)) { @@ -206,7 +206,7 @@ static int smc_pnet_add_by_ndev(struct net_device *ndev) break; } } - write_unlock(&pnettable->lock); + mutex_unlock(&pnettable->lock); return rc; } @@ -224,7 +224,7 @@ static int smc_pnet_remove_by_ndev(struct net_device *ndev) sn = net_generic(net, smc_net_id); pnettable = &sn->pnettable; - write_lock(&pnettable->lock); + mutex_lock(&pnettable->lock); list_for_each_entry_safe(pnetelem, tmp_pe, &pnettable->pnetlist, list) { if (pnetelem->type == SMC_PNET_ETH && pnetelem->ndev == ndev) { dev_put_track(pnetelem->ndev, &pnetelem->dev_tracker); @@ -237,7 +237,7 @@ static int smc_pnet_remove_by_ndev(struct net_device *ndev) break; } } - write_unlock(&pnettable->lock); + mutex_unlock(&pnettable->lock); return rc; } @@ -370,7 +370,7 @@ static int smc_pnet_add_eth(struct smc_pnettable *pnettable, struct net *net, strncpy(new_pe->eth_name, eth_name, IFNAMSIZ); rc = -EEXIST; new_netdev = true; - write_lock(&pnettable->lock); + mutex_lock(&pnettable->lock); list_for_each_entry(tmp_pe, &pnettable->pnetlist, list) { if (tmp_pe->type == SMC_PNET_ETH && !strncmp(tmp_pe->eth_name, eth_name, IFNAMSIZ)) { @@ -385,9 +385,9 @@ static int smc_pnet_add_eth(struct smc_pnettable *pnettable, struct net *net, GFP_ATOMIC); } list_add_tail(&new_pe->list, &pnettable->pnetlist); - write_unlock(&pnettable->lock); + mutex_unlock(&pnettable->lock); } else { - write_unlock(&pnettable->lock); + mutex_unlock(&pnettable->lock); kfree(new_pe); goto out_put; } @@ -448,7 +448,7 @@ static int smc_pnet_add_ib(struct smc_pnettable *pnettable, char *ib_name, new_pe->ib_port = ib_port; new_ibdev = true; - write_lock(&pnettable->lock); + mutex_lock(&pnettable->lock); list_for_each_entry(tmp_pe, &pnettable->pnetlist, list) { if (tmp_pe->type == SMC_PNET_IB && !strncmp(tmp_pe->ib_name, ib_name, IB_DEVICE_NAME_MAX)) { @@ -458,9 +458,9 @@ static int smc_pnet_add_ib(struct smc_pnettable *pnettable, char *ib_name, } if (new_ibdev) { list_add_tail(&new_pe->list, &pnettable->pnetlist); - write_unlock(&pnettable->lock); + mutex_unlock(&pnettable->lock); } else { - write_unlock(&pnettable->lock); + mutex_unlock(&pnettable->lock); kfree(new_pe); } return (new_ibdev) ? 0 : -EEXIST; @@ -605,7 +605,7 @@ static int _smc_pnet_dump(struct net *net, struct sk_buff *skb, u32 portid, pnettable = &sn->pnettable; /* dump pnettable entries */ - read_lock(&pnettable->lock); + mutex_lock(&pnettable->lock); list_for_each_entry(pnetelem, &pnettable->pnetlist, list) { if (pnetid && !smc_pnet_match(pnetelem->pnet_name, pnetid)) continue; @@ -620,7 +620,7 @@ static int _smc_pnet_dump(struct net *net, struct sk_buff *skb, u32 portid, break; } } - read_unlock(&pnettable->lock); + mutex_unlock(&pnettable->lock); return idx; } @@ -864,7 +864,7 @@ int smc_pnet_net_init(struct net *net) struct smc_pnetids_ndev *pnetids_ndev = &sn->pnetids_ndev; INIT_LIST_HEAD(&pnettable->pnetlist); - rwlock_init(&pnettable->lock); + mutex_init(&pnettable->lock); INIT_LIST_HEAD(&pnetids_ndev->list); rwlock_init(&pnetids_ndev->lock); @@ -944,7 +944,7 @@ static int smc_pnet_find_ndev_pnetid_by_table(struct net_device *ndev, sn = net_generic(net, smc_net_id); pnettable = &sn->pnettable; - read_lock(&pnettable->lock); + mutex_lock(&pnettable->lock); list_for_each_entry(pnetelem, &pnettable->pnetlist, list) { if (pnetelem->type == SMC_PNET_ETH && ndev == pnetelem->ndev) { /* get pnetid of netdev device */ @@ -953,7 +953,7 @@ static int smc_pnet_find_ndev_pnetid_by_table(struct net_device *ndev, break; } } - read_unlock(&pnettable->lock); + mutex_unlock(&pnettable->lock); return rc; } @@ -1156,7 +1156,7 @@ int smc_pnetid_by_table_ib(struct smc_ib_device *smcibdev, u8 ib_port) sn = net_generic(&init_net, smc_net_id); pnettable = &sn->pnettable; - read_lock(&pnettable->lock); + mutex_lock(&pnettable->lock); list_for_each_entry(tmp_pe, &pnettable->pnetlist, list) { if (tmp_pe->type == SMC_PNET_IB && !strncmp(tmp_pe->ib_name, ib_name, IB_DEVICE_NAME_MAX) && @@ -1166,7 +1166,7 @@ int smc_pnetid_by_table_ib(struct smc_ib_device *smcibdev, u8 ib_port) break; } } - read_unlock(&pnettable->lock); + mutex_unlock(&pnettable->lock); return rc; } @@ -1185,7 +1185,7 @@ int smc_pnetid_by_table_smcd(struct smcd_dev *smcddev) sn = net_generic(&init_net, smc_net_id); pnettable = &sn->pnettable; - read_lock(&pnettable->lock); + mutex_lock(&pnettable->lock); list_for_each_entry(tmp_pe, &pnettable->pnetlist, list) { if (tmp_pe->type == SMC_PNET_IB && !strncmp(tmp_pe->ib_name, ib_name, IB_DEVICE_NAME_MAX)) { @@ -1194,7 +1194,7 @@ int smc_pnetid_by_table_smcd(struct smcd_dev *smcddev) break; } } - read_unlock(&pnettable->lock); + mutex_unlock(&pnettable->lock); return rc; } diff --git a/net/smc/smc_pnet.h b/net/smc/smc_pnet.h index 14039272f7e426..80a88eea494918 100644 --- a/net/smc/smc_pnet.h +++ b/net/smc/smc_pnet.h @@ -29,7 +29,7 @@ struct smc_link_group; * @pnetlist: List of PNETIDs */ struct smc_pnettable { - rwlock_t lock; + struct mutex lock; struct list_head pnetlist; }; From 6c0d8833a605e195ae219b5042577ce52bf71fff Mon Sep 17 00:00:00 2001 From: Niels Dossche Date: Wed, 23 Feb 2022 14:19:56 +0100 Subject: [PATCH 458/493] ipv6: prevent a possible race condition with lifetimes valid_lft, prefered_lft and tstamp are always accessed under the lock "lock" in other places. Reading these without taking the lock may result in inconsistencies regarding the calculation of the valid and preferred variables since decisions are taken on these fields for those variables. Signed-off-by: Niels Dossche Reviewed-by: David Ahern Signed-off-by: Niels Dossche Link: https://lore.kernel.org/r/20220223131954.6570-1-niels.dossche@ugent.be Signed-off-by: Jakub Kicinski --- net/ipv6/addrconf.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 3f23da8c0b1029..6c8ab3e6e6fe15 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -4998,6 +4998,7 @@ static int inet6_fill_ifaddr(struct sk_buff *skb, struct inet6_ifaddr *ifa, nla_put_s32(skb, IFA_TARGET_NETNSID, args->netnsid)) goto error; + spin_lock_bh(&ifa->lock); if (!((ifa->flags&IFA_F_PERMANENT) && (ifa->prefered_lft == INFINITY_LIFE_TIME))) { preferred = ifa->prefered_lft; @@ -5019,6 +5020,7 @@ static int inet6_fill_ifaddr(struct sk_buff *skb, struct inet6_ifaddr *ifa, preferred = INFINITY_LIFE_TIME; valid = INFINITY_LIFE_TIME; } + spin_unlock_bh(&ifa->lock); if (!ipv6_addr_any(&ifa->peer_addr)) { if (nla_put_in6_addr(skb, IFA_LOCAL, &ifa->addr) < 0 || From d9b5ae5c1b241b91480aa30408be12fe91af834a Mon Sep 17 00:00:00 2001 From: Paul Blakey Date: Wed, 23 Feb 2022 18:34:16 +0200 Subject: [PATCH 459/493] openvswitch: Fix setting ipv6 fields causing hw csum failure Ipv6 ttl, label and tos fields are modified without first pulling/pushing the ipv6 header, which would have updated the hw csum (if available). This might cause csum validation when sending the packet to the stack, as can be seen in the trace below. Fix this by updating skb->csum if available. Trace resulted by ipv6 ttl dec and then sending packet to conntrack [actions: set(ipv6(hlimit=63)),ct(zone=99)]: [295241.900063] s_pf0vf2: hw csum failure [295241.923191] Call Trace: [295241.925728] [295241.927836] dump_stack+0x5c/0x80 [295241.931240] __skb_checksum_complete+0xac/0xc0 [295241.935778] nf_conntrack_tcp_packet+0x398/0xba0 [nf_conntrack] [295241.953030] nf_conntrack_in+0x498/0x5e0 [nf_conntrack] [295241.958344] __ovs_ct_lookup+0xac/0x860 [openvswitch] [295241.968532] ovs_ct_execute+0x4a7/0x7c0 [openvswitch] [295241.979167] do_execute_actions+0x54a/0xaa0 [openvswitch] [295242.001482] ovs_execute_actions+0x48/0x100 [openvswitch] [295242.006966] ovs_dp_process_packet+0x96/0x1d0 [openvswitch] [295242.012626] ovs_vport_receive+0x6c/0xc0 [openvswitch] [295242.028763] netdev_frame_hook+0xc0/0x180 [openvswitch] [295242.034074] __netif_receive_skb_core+0x2ca/0xcb0 [295242.047498] netif_receive_skb_internal+0x3e/0xc0 [295242.052291] napi_gro_receive+0xba/0xe0 [295242.056231] mlx5e_handle_rx_cqe_mpwrq_rep+0x12b/0x250 [mlx5_core] [295242.062513] mlx5e_poll_rx_cq+0xa0f/0xa30 [mlx5_core] [295242.067669] mlx5e_napi_poll+0xe1/0x6b0 [mlx5_core] [295242.077958] net_rx_action+0x149/0x3b0 [295242.086762] __do_softirq+0xd7/0x2d6 [295242.090427] irq_exit+0xf7/0x100 [295242.093748] do_IRQ+0x7f/0xd0 [295242.096806] common_interrupt+0xf/0xf [295242.100559] [295242.102750] RIP: 0033:0x7f9022e88cbd [295242.125246] RSP: 002b:00007f9022282b20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffda [295242.132900] RAX: 0000000000000005 RBX: 0000000000000010 RCX: 0000000000000000 [295242.140120] RDX: 00007f9022282ba8 RSI: 00007f9022282a30 RDI: 00007f9014005c30 [295242.147337] RBP: 00007f9014014d60 R08: 0000000000000020 R09: 00007f90254a8340 [295242.154557] R10: 00007f9022282a28 R11: 0000000000000246 R12: 0000000000000000 [295242.161775] R13: 00007f902308c000 R14: 000000000000002b R15: 00007f9022b71f40 Fixes: 3fdbd1ce11e5 ("openvswitch: add ipv6 'set' action") Signed-off-by: Paul Blakey Link: https://lore.kernel.org/r/20220223163416.24096-1-paulb@nvidia.com Signed-off-by: Jakub Kicinski --- include/net/checksum.h | 5 +++++ net/openvswitch/actions.c | 46 ++++++++++++++++++++++++++++++++------- 2 files changed, 43 insertions(+), 8 deletions(-) diff --git a/include/net/checksum.h b/include/net/checksum.h index 02d0c2d010147a..79c67f14c44886 100644 --- a/include/net/checksum.h +++ b/include/net/checksum.h @@ -142,6 +142,11 @@ static __always_inline void csum_replace2(__sum16 *sum, __be16 old, __be16 new) *sum = ~csum16_add(csum16_sub(~(*sum), old), new); } +static inline void csum_replace(__wsum *csum, __wsum old, __wsum new) +{ + *csum = csum_add(csum_sub(*csum, old), new); +} + struct sk_buff; void inet_proto_csum_replace4(__sum16 *sum, struct sk_buff *skb, __be32 from, __be32 to, bool pseudohdr); diff --git a/net/openvswitch/actions.c b/net/openvswitch/actions.c index 076774034bb960..780d9e2246f394 100644 --- a/net/openvswitch/actions.c +++ b/net/openvswitch/actions.c @@ -423,12 +423,43 @@ static void set_ipv6_addr(struct sk_buff *skb, u8 l4_proto, memcpy(addr, new_addr, sizeof(__be32[4])); } -static void set_ipv6_fl(struct ipv6hdr *nh, u32 fl, u32 mask) +static void set_ipv6_dsfield(struct sk_buff *skb, struct ipv6hdr *nh, u8 ipv6_tclass, u8 mask) { + u8 old_ipv6_tclass = ipv6_get_dsfield(nh); + + ipv6_tclass = OVS_MASKED(old_ipv6_tclass, ipv6_tclass, mask); + + if (skb->ip_summed == CHECKSUM_COMPLETE) + csum_replace(&skb->csum, (__force __wsum)(old_ipv6_tclass << 12), + (__force __wsum)(ipv6_tclass << 12)); + + ipv6_change_dsfield(nh, ~mask, ipv6_tclass); +} + +static void set_ipv6_fl(struct sk_buff *skb, struct ipv6hdr *nh, u32 fl, u32 mask) +{ + u32 ofl; + + ofl = nh->flow_lbl[0] << 16 | nh->flow_lbl[1] << 8 | nh->flow_lbl[2]; + fl = OVS_MASKED(ofl, fl, mask); + /* Bits 21-24 are always unmasked, so this retains their values. */ - OVS_SET_MASKED(nh->flow_lbl[0], (u8)(fl >> 16), (u8)(mask >> 16)); - OVS_SET_MASKED(nh->flow_lbl[1], (u8)(fl >> 8), (u8)(mask >> 8)); - OVS_SET_MASKED(nh->flow_lbl[2], (u8)fl, (u8)mask); + nh->flow_lbl[0] = (u8)(fl >> 16); + nh->flow_lbl[1] = (u8)(fl >> 8); + nh->flow_lbl[2] = (u8)fl; + + if (skb->ip_summed == CHECKSUM_COMPLETE) + csum_replace(&skb->csum, (__force __wsum)htonl(ofl), (__force __wsum)htonl(fl)); +} + +static void set_ipv6_ttl(struct sk_buff *skb, struct ipv6hdr *nh, u8 new_ttl, u8 mask) +{ + new_ttl = OVS_MASKED(nh->hop_limit, new_ttl, mask); + + if (skb->ip_summed == CHECKSUM_COMPLETE) + csum_replace(&skb->csum, (__force __wsum)(nh->hop_limit << 8), + (__force __wsum)(new_ttl << 8)); + nh->hop_limit = new_ttl; } static void set_ip_ttl(struct sk_buff *skb, struct iphdr *nh, u8 new_ttl, @@ -546,18 +577,17 @@ static int set_ipv6(struct sk_buff *skb, struct sw_flow_key *flow_key, } } if (mask->ipv6_tclass) { - ipv6_change_dsfield(nh, ~mask->ipv6_tclass, key->ipv6_tclass); + set_ipv6_dsfield(skb, nh, key->ipv6_tclass, mask->ipv6_tclass); flow_key->ip.tos = ipv6_get_dsfield(nh); } if (mask->ipv6_label) { - set_ipv6_fl(nh, ntohl(key->ipv6_label), + set_ipv6_fl(skb, nh, ntohl(key->ipv6_label), ntohl(mask->ipv6_label)); flow_key->ipv6.label = *(__be32 *)nh & htonl(IPV6_FLOWINFO_FLOWLABEL); } if (mask->ipv6_hlimit) { - OVS_SET_MASKED(nh->hop_limit, key->ipv6_hlimit, - mask->ipv6_hlimit); + set_ipv6_ttl(skb, nh, key->ipv6_hlimit, mask->ipv6_hlimit); flow_key->ip.ttl = nh->hop_limit; } return 0; From fe20371578ef640069e6ae9fa8038f60e7908565 Mon Sep 17 00:00:00 2001 From: Mateusz Palczewski Date: Wed, 23 Feb 2022 09:53:47 -0800 Subject: [PATCH 460/493] Revert "i40e: Fix reset bw limit when DCB enabled with 1 TC" Revert of a patch that instead of fixing a AQ error when trying to reset BW limit introduced several regressions related to creation and managing TC. Currently there are errors when creating a TC on both PF and VF. Error log: [17428.783095] i40e 0000:3b:00.1: AQ command Config VSI BW allocation per TC failed = 14 [17428.783107] i40e 0000:3b:00.1: Failed configuring TC map 0 for VSI 391 [17428.783254] i40e 0000:3b:00.1: AQ command Config VSI BW allocation per TC failed = 14 [17428.783259] i40e 0000:3b:00.1: Unable to configure TC map 0 for VSI 391 This reverts commit 3d2504663c41104b4359a15f35670cfa82de1bbf. Fixes: 3d2504663c41 (i40e: Fix reset bw limit when DCB enabled with 1 TC) Signed-off-by: Mateusz Palczewski Signed-off-by: Tony Nguyen Link: https://lore.kernel.org/r/20220223175347.1690692-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/intel/i40e/i40e_main.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 0c4b7dfb3b35d5..31b03fe78d3be5 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -5372,15 +5372,7 @@ static int i40e_vsi_configure_bw_alloc(struct i40e_vsi *vsi, u8 enabled_tc, /* There is no need to reset BW when mqprio mode is on. */ if (pf->flags & I40E_FLAG_TC_MQPRIO) return 0; - - if (!vsi->mqprio_qopt.qopt.hw) { - if (pf->flags & I40E_FLAG_DCB_ENABLED) - goto skip_reset; - - if (IS_ENABLED(CONFIG_I40E_DCB) && - i40e_dcb_hw_get_num_tc(&pf->hw) == 1) - goto skip_reset; - + if (!vsi->mqprio_qopt.qopt.hw && !(pf->flags & I40E_FLAG_DCB_ENABLED)) { ret = i40e_set_bw_limit(vsi, vsi->seid, 0); if (ret) dev_info(&pf->pdev->dev, @@ -5388,8 +5380,6 @@ static int i40e_vsi_configure_bw_alloc(struct i40e_vsi *vsi, u8 enabled_tc, vsi->seid); return ret; } - -skip_reset: memset(&bw_data, 0, sizeof(bw_data)); bw_data.tc_valid_bits = enabled_tc; for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) From cd33bdcbead882c2e58fdb4a54a7bd75b610a452 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Wed, 23 Feb 2022 22:41:08 -0500 Subject: [PATCH 461/493] ping: remove pr_err from ping_lookup As Jakub noticed, prints should be avoided on the datapath. Also, as packets would never come to the else branch in ping_lookup(), remove pr_err() from ping_lookup(). Fixes: 35a79e64de29 ("ping: fix the dif and sdif check in ping_lookup") Reported-by: Jakub Kicinski Signed-off-by: Xin Long Link: https://lore.kernel.org/r/1ef3f2fcd31bd681a193b1fcf235eee1603819bd.1645674068.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski --- net/ipv4/ping.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c index 3a5994b50571f0..3ee947557b8835 100644 --- a/net/ipv4/ping.c +++ b/net/ipv4/ping.c @@ -187,7 +187,6 @@ static struct sock *ping_lookup(struct net *net, struct sk_buff *skb, u16 ident) (int)ident, &ipv6_hdr(skb)->daddr, dif); #endif } else { - pr_err("ping: protocol(%x) is not supported\n", ntohs(skb->protocol)); return NULL; } From 6f3c1fc53d86d580d8d6d749c4af23705e4f6f79 Mon Sep 17 00:00:00 2001 From: Liang Zhang Date: Tue, 22 Feb 2022 11:12:39 +0800 Subject: [PATCH 462/493] KVM: x86/mmu: make apf token non-zero to fix bug In current async pagefault logic, when a page is ready, KVM relies on kvm_arch_can_dequeue_async_page_present() to determine whether to deliver a READY event to the Guest. This function test token value of struct kvm_vcpu_pv_apf_data, which must be reset to zero by Guest kernel when a READY event is finished by Guest. If value is zero meaning that a READY event is done, so the KVM can deliver another. But the kvm_arch_setup_async_pf() may produce a valid token with zero value, which is confused with previous mention and may lead the loss of this READY event. This bug may cause task blocked forever in Guest: INFO: task stress:7532 blocked for more than 1254 seconds. Not tainted 5.10.0 #16 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:stress state:D stack: 0 pid: 7532 ppid: 1409 flags:0x00000080 Call Trace: __schedule+0x1e7/0x650 schedule+0x46/0xb0 kvm_async_pf_task_wait_schedule+0xad/0xe0 ? exit_to_user_mode_prepare+0x60/0x70 __kvm_handle_async_pf+0x4f/0xb0 ? asm_exc_page_fault+0x8/0x30 exc_page_fault+0x6f/0x110 ? asm_exc_page_fault+0x8/0x30 asm_exc_page_fault+0x1e/0x30 RIP: 0033:0x402d00 RSP: 002b:00007ffd31912500 EFLAGS: 00010206 RAX: 0000000000071000 RBX: ffffffffffffffff RCX: 00000000021a32b0 RDX: 000000000007d011 RSI: 000000000007d000 RDI: 00000000021262b0 RBP: 00000000021262b0 R08: 0000000000000003 R09: 0000000000000086 R10: 00000000000000eb R11: 00007fefbdf2baa0 R12: 0000000000000000 R13: 0000000000000002 R14: 000000000007d000 R15: 0000000000001000 Signed-off-by: Liang Zhang Message-Id: <20220222031239.1076682-1-zhangliang5@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini --- arch/x86/kvm/mmu/mmu.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c index 593093b5239538..8e24f73bf60be5 100644 --- a/arch/x86/kvm/mmu/mmu.c +++ b/arch/x86/kvm/mmu/mmu.c @@ -3889,12 +3889,23 @@ static void shadow_page_table_clear_flood(struct kvm_vcpu *vcpu, gva_t addr) walk_shadow_page_lockless_end(vcpu); } +static u32 alloc_apf_token(struct kvm_vcpu *vcpu) +{ + /* make sure the token value is not 0 */ + u32 id = vcpu->arch.apf.id; + + if (id << 12 == 0) + vcpu->arch.apf.id = 1; + + return (vcpu->arch.apf.id++ << 12) | vcpu->vcpu_id; +} + static bool kvm_arch_setup_async_pf(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa, gfn_t gfn) { struct kvm_arch_async_pf arch; - arch.token = (vcpu->arch.apf.id++ << 12) | vcpu->vcpu_id; + arch.token = alloc_apf_token(vcpu); arch.gfn = gfn; arch.direct_map = vcpu->arch.mmu->direct_map; arch.cr3 = vcpu->arch.mmu->get_guest_pgd(vcpu); From e910a53fb4f20aa012e46371ffb4c32c8da259b4 Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Wed, 23 Feb 2022 13:56:49 +0200 Subject: [PATCH 463/493] KVM: x86: nSVM: disallow userspace setting of MSR_AMD64_TSC_RATIO to non default value when tsc scaling disabled If nested tsc scaling is disabled, MSR_AMD64_TSC_RATIO should never have non default value. Due to way nested tsc scaling support was implmented in qemu, it would set this msr to 0 when nested tsc scaling was disabled. Ignore that value for now, as it causes no harm. Fixes: 5228eb96a487 ("KVM: x86: nSVM: implement nested TSC scaling") Cc: stable@vger.kernel.org Signed-off-by: Maxim Levitsky Message-Id: <20220223115649.319134-1-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm/svm.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c index 821edf664e7a12..fd3a00c892c797 100644 --- a/arch/x86/kvm/svm/svm.c +++ b/arch/x86/kvm/svm/svm.c @@ -2693,8 +2693,23 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr) u64 data = msr->data; switch (ecx) { case MSR_AMD64_TSC_RATIO: - if (!msr->host_initiated && !svm->tsc_scaling_enabled) - return 1; + + if (!svm->tsc_scaling_enabled) { + + if (!msr->host_initiated) + return 1; + /* + * In case TSC scaling is not enabled, always + * leave this MSR at the default value. + * + * Due to bug in qemu 6.2.0, it would try to set + * this msr to 0 if tsc scaling is not enabled. + * Ignore this value as well. + */ + if (data != 0 && data != svm->tsc_ratio_msr) + return 1; + break; + } if (data & TSC_RATIO_RSVD) return 1; From 42404d8f1c01861b22ccfa1d70f950242720ae57 Mon Sep 17 00:00:00 2001 From: Mauri Sandberg Date: Wed, 23 Feb 2022 16:23:37 +0200 Subject: [PATCH 464/493] net: mv643xx_eth: process retval from of_get_mac_address Obtaining a MAC address may be deferred in cases when the MAC is stored in an NVMEM block, for example, and it may not be ready upon the first retrieval attempt and return EPROBE_DEFER. It is also possible that a port that does not rely on NVMEM has been already created when getting the defer request. Thus, also the resources allocated previously must be freed when doing a roll-back. Fixes: 76723bca2802 ("net: mv643xx_eth: add DT parsing support") Signed-off-by: Mauri Sandberg Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20220223142337.41757-1-maukka@ext.kapsi.fi Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/marvell/mv643xx_eth.c | 24 +++++++++++++--------- 1 file changed, 14 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index 105247582684de..143ca8be5eb595 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -2704,6 +2704,16 @@ MODULE_DEVICE_TABLE(of, mv643xx_eth_shared_ids); static struct platform_device *port_platdev[3]; +static void mv643xx_eth_shared_of_remove(void) +{ + int n; + + for (n = 0; n < 3; n++) { + platform_device_del(port_platdev[n]); + port_platdev[n] = NULL; + } +} + static int mv643xx_eth_shared_of_add_port(struct platform_device *pdev, struct device_node *pnp) { @@ -2740,7 +2750,9 @@ static int mv643xx_eth_shared_of_add_port(struct platform_device *pdev, return -EINVAL; } - of_get_mac_address(pnp, ppd.mac_addr); + ret = of_get_mac_address(pnp, ppd.mac_addr); + if (ret) + return ret; mv643xx_eth_property(pnp, "tx-queue-size", ppd.tx_queue_size); mv643xx_eth_property(pnp, "tx-sram-addr", ppd.tx_sram_addr); @@ -2804,21 +2816,13 @@ static int mv643xx_eth_shared_of_probe(struct platform_device *pdev) ret = mv643xx_eth_shared_of_add_port(pdev, pnp); if (ret) { of_node_put(pnp); + mv643xx_eth_shared_of_remove(); return ret; } } return 0; } -static void mv643xx_eth_shared_of_remove(void) -{ - int n; - - for (n = 0; n < 3; n++) { - platform_device_del(port_platdev[n]); - port_platdev[n] = NULL; - } -} #else static inline int mv643xx_eth_shared_of_probe(struct platform_device *pdev) { From 3abea10e6a8f0e7804ed4c124bea2d15aca977c8 Mon Sep 17 00:00:00 2001 From: Chuansheng Liu Date: Wed, 23 Feb 2022 08:20:24 +0800 Subject: [PATCH 465/493] thermal: int340x: fix memory leak in int3400_notify() It is easy to hit the below memory leaks in my TigerLake platform: unreferenced object 0xffff927c8b91dbc0 (size 32): comm "kworker/0:2", pid 112, jiffies 4294893323 (age 83.604s) hex dump (first 32 bytes): 4e 41 4d 45 3d 49 4e 54 33 34 30 30 20 54 68 65 NAME=INT3400 The 72 6d 61 6c 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 rmal.kkkkkkkkkk. backtrace: [] __kmalloc_track_caller+0x2fe/0x4a0 [] kvasprintf+0x65/0xd0 [] kasprintf+0x4e/0x70 [] int3400_notify+0x82/0x120 [int3400_thermal] [] acpi_ev_notify_dispatch+0x54/0x71 [] acpi_os_execute_deferred+0x17/0x30 [] process_one_work+0x21a/0x3f0 [] worker_thread+0x4a/0x3b0 [] kthread+0xfd/0x130 [] ret_from_fork+0x1f/0x30 Fix it by calling kfree() accordingly. Fixes: 38e44da59130 ("thermal: int3400_thermal: process "thermal table changed" event") Signed-off-by: Chuansheng Liu Cc: 4.14+ # 4.14+ Signed-off-by: Rafael J. Wysocki --- drivers/thermal/intel/int340x_thermal/int3400_thermal.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c index 72acb1f6184970..4f478812cb5144 100644 --- a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c +++ b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c @@ -404,6 +404,10 @@ static void int3400_notify(acpi_handle handle, thermal_prop[3] = kasprintf(GFP_KERNEL, "EVENT=%d", therm_event); thermal_prop[4] = NULL; kobject_uevent_env(&priv->thermal->device.kobj, KOBJ_CHANGE, thermal_prop); + kfree(thermal_prop[0]); + kfree(thermal_prop[1]); + kfree(thermal_prop[2]); + kfree(thermal_prop[3]); } static int int3400_thermal_get_temp(struct thermal_zone_device *thermal, From ce33c845b030c9cf768370c951bc699470b09fa7 Mon Sep 17 00:00:00 2001 From: Daniel Bristot de Oliveira Date: Sun, 20 Feb 2022 23:49:57 +0100 Subject: [PATCH 466/493] tracing: Dump stacktrace trigger to the corresponding instance The stacktrace event trigger is not dumping the stacktrace to the instance where it was enabled, but to the global "instance." Use the private_data, pointing to the trigger file, to figure out the corresponding trace instance, and use it in the trigger action, like snapshot_trigger does. Link: https://lkml.kernel.org/r/afbb0b4f18ba92c276865bc97204d438473f4ebc.1645396236.git.bristot@kernel.org Cc: stable@vger.kernel.org Fixes: ae63b31e4d0e2 ("tracing: Separate out trace events from global variables") Reviewed-by: Tom Zanussi Tested-by: Tom Zanussi Signed-off-by: Daniel Bristot de Oliveira Signed-off-by: Steven Rostedt (Google) --- kernel/trace/trace_events_trigger.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace_events_trigger.c b/kernel/trace/trace_events_trigger.c index d00fee705f9c57..e0d50c9577f3b1 100644 --- a/kernel/trace/trace_events_trigger.c +++ b/kernel/trace/trace_events_trigger.c @@ -1540,7 +1540,12 @@ stacktrace_trigger(struct event_trigger_data *data, struct trace_buffer *buffer, void *rec, struct ring_buffer_event *event) { - trace_dump_stack(STACK_SKIP); + struct trace_event_file *file = data->private_data; + + if (file) + __trace_stack(file->tr, tracing_gen_ctx(), STACK_SKIP); + else + trace_dump_stack(STACK_SKIP); } static void From 762e52f79c95ea20a7229674ffd13b94d7d8959c Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Wed, 9 Feb 2022 12:56:23 +0900 Subject: [PATCH 467/493] riscv: fix nommu_k210_sdcard_defconfig Instead of an arbitrary delay, use the "rootwait" kernel option to wait for the mmc root device to be ready. Signed-off-by: Damien Le Moal Reviewed-by: Anup Patel Fixes: 7e09fd3994c5 ("riscv: Add Canaan Kendryte K210 SD card defconfig") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt --- arch/riscv/configs/nommu_k210_sdcard_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/riscv/configs/nommu_k210_sdcard_defconfig b/arch/riscv/configs/nommu_k210_sdcard_defconfig index 2a82a3b2992b28..af64b95e88cc63 100644 --- a/arch/riscv/configs/nommu_k210_sdcard_defconfig +++ b/arch/riscv/configs/nommu_k210_sdcard_defconfig @@ -23,7 +23,7 @@ CONFIG_SLOB=y CONFIG_SOC_CANAAN=y CONFIG_SMP=y CONFIG_NR_CPUS=2 -CONFIG_CMDLINE="earlycon console=ttySIF0 rootdelay=2 root=/dev/mmcblk0p1 ro" +CONFIG_CMDLINE="earlycon console=ttySIF0 root=/dev/mmcblk0p1 rootwait ro" CONFIG_CMDLINE_FORCE=y # CONFIG_SECCOMP is not set # CONFIG_STACKPROTECTOR is not set From 22e2100b1b07d6f5acc71cc1acb53f680c677d77 Mon Sep 17 00:00:00 2001 From: Changbin Du Date: Sun, 13 Feb 2022 16:18:45 +0800 Subject: [PATCH 468/493] riscv: fix oops caused by irqsoff latency tracer The trace_hardirqs_{on,off}() require the caller to setup frame pointer properly. This because these two functions use macro 'CALLER_ADDR1' (aka. __builtin_return_address(1)) to acquire caller info. If the $fp is used for other purpose, the code generated this macro (as below) could trigger memory access fault. 0xffffffff8011510e <+80>: ld a1,-16(s0) 0xffffffff80115112 <+84>: ld s2,-8(a1) # <-- paging fault here The oops message during booting if compiled with 'irqoff' tracer enabled: [ 0.039615][ T0] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000f8 [ 0.041925][ T0] Oops [#1] [ 0.042063][ T0] Modules linked in: [ 0.042864][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.17.0-rc1-00233-g9a20c48d1ed2 #29 [ 0.043568][ T0] Hardware name: riscv-virtio,qemu (DT) [ 0.044343][ T0] epc : trace_hardirqs_on+0x56/0xe2 [ 0.044601][ T0] ra : restore_all+0x12/0x6e [ 0.044721][ T0] epc : ffffffff80126a5c ra : ffffffff80003b94 sp : ffffffff81403db0 [ 0.044801][ T0] gp : ffffffff8163acd8 tp : ffffffff81414880 t0 : 0000000000000020 [ 0.044882][ T0] t1 : 0098968000000000 t2 : 0000000000000000 s0 : ffffffff81403de0 [ 0.044967][ T0] s1 : 0000000000000000 a0 : 0000000000000001 a1 : 0000000000000100 [ 0.045046][ T0] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.045124][ T0] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000054494d45 [ 0.045210][ T0] s2 : ffffffff80003b94 s3 : ffffffff81a8f1b0 s4 : ffffffff80e27b50 [ 0.045289][ T0] s5 : ffffffff81414880 s6 : ffffffff8160fa00 s7 : 00000000800120e8 [ 0.045389][ T0] s8 : 0000000080013100 s9 : 000000000000007f s10: 0000000000000000 [ 0.045474][ T0] s11: 0000000000000000 t3 : 7fffffffffffffff t4 : 0000000000000000 [ 0.045548][ T0] t5 : 0000000000000000 t6 : ffffffff814aa368 [ 0.045620][ T0] status: 0000000200000100 badaddr: 00000000000000f8 cause: 000000000000000d [ 0.046402][ T0] [] restore_all+0x12/0x6e This because the $fp(aka. $s0) register is not used as frame pointer in the assembly entry code. resume_kernel: REG_L s0, TASK_TI_PREEMPT_COUNT(tp) bnez s0, restore_all REG_L s0, TASK_TI_FLAGS(tp) andi s0, s0, _TIF_NEED_RESCHED beqz s0, restore_all call preempt_schedule_irq j restore_all To fix above issue, here we add one extra level wrapper for function trace_hardirqs_{on,off}() so they can be safely called by low level entry code. Signed-off-by: Changbin Du Fixes: 3c4697982982 ("riscv: Enable LOCKDEP_SUPPORT & fixup TRACE_IRQFLAGS_SUPPORT") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/Makefile | 2 ++ arch/riscv/kernel/entry.S | 10 +++++----- arch/riscv/kernel/trace_irq.c | 27 +++++++++++++++++++++++++++ arch/riscv/kernel/trace_irq.h | 11 +++++++++++ 4 files changed, 45 insertions(+), 5 deletions(-) create mode 100644 arch/riscv/kernel/trace_irq.c create mode 100644 arch/riscv/kernel/trace_irq.h diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile index 612556faa527f5..ffc87e76b1ddf0 100644 --- a/arch/riscv/kernel/Makefile +++ b/arch/riscv/kernel/Makefile @@ -51,6 +51,8 @@ obj-$(CONFIG_MODULE_SECTIONS) += module-sections.o obj-$(CONFIG_FUNCTION_TRACER) += mcount.o ftrace.o obj-$(CONFIG_DYNAMIC_FTRACE) += mcount-dyn.o +obj-$(CONFIG_TRACE_IRQFLAGS) += trace_irq.o + obj-$(CONFIG_RISCV_BASE_PMU) += perf_event.o obj-$(CONFIG_PERF_EVENTS) += perf_callchain.o obj-$(CONFIG_HAVE_PERF_REGS) += perf_regs.o diff --git a/arch/riscv/kernel/entry.S b/arch/riscv/kernel/entry.S index ed29e9c8f660c6..d6a46ed0bf051b 100644 --- a/arch/riscv/kernel/entry.S +++ b/arch/riscv/kernel/entry.S @@ -108,7 +108,7 @@ _save_context: .option pop #ifdef CONFIG_TRACE_IRQFLAGS - call trace_hardirqs_off + call __trace_hardirqs_off #endif #ifdef CONFIG_CONTEXT_TRACKING @@ -143,7 +143,7 @@ skip_context_tracking: li t0, EXC_BREAKPOINT beq s4, t0, 1f #ifdef CONFIG_TRACE_IRQFLAGS - call trace_hardirqs_on + call __trace_hardirqs_on #endif csrs CSR_STATUS, SR_IE @@ -234,7 +234,7 @@ ret_from_exception: REG_L s0, PT_STATUS(sp) csrc CSR_STATUS, SR_IE #ifdef CONFIG_TRACE_IRQFLAGS - call trace_hardirqs_off + call __trace_hardirqs_off #endif #ifdef CONFIG_RISCV_M_MODE /* the MPP value is too large to be used as an immediate arg for addi */ @@ -270,10 +270,10 @@ restore_all: REG_L s1, PT_STATUS(sp) andi t0, s1, SR_PIE beqz t0, 1f - call trace_hardirqs_on + call __trace_hardirqs_on j 2f 1: - call trace_hardirqs_off + call __trace_hardirqs_off 2: #endif REG_L a0, PT_STATUS(sp) diff --git a/arch/riscv/kernel/trace_irq.c b/arch/riscv/kernel/trace_irq.c new file mode 100644 index 00000000000000..095ac976d7da10 --- /dev/null +++ b/arch/riscv/kernel/trace_irq.c @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 Changbin Du + */ + +#include +#include +#include "trace_irq.h" + +/* + * trace_hardirqs_on/off require the caller to setup frame pointer properly. + * Otherwise, CALLER_ADDR1 might trigger an pagging exception in kernel. + * Here we add one extra level so they can be safely called by low + * level entry code which $fp is used for other purpose. + */ + +void __trace_hardirqs_on(void) +{ + trace_hardirqs_on(); +} +NOKPROBE_SYMBOL(__trace_hardirqs_on); + +void __trace_hardirqs_off(void) +{ + trace_hardirqs_off(); +} +NOKPROBE_SYMBOL(__trace_hardirqs_off); diff --git a/arch/riscv/kernel/trace_irq.h b/arch/riscv/kernel/trace_irq.h new file mode 100644 index 00000000000000..99fe67377e5ed6 --- /dev/null +++ b/arch/riscv/kernel/trace_irq.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2022 Changbin Du + */ +#ifndef __TRACE_IRQ_H +#define __TRACE_IRQ_H + +void __trace_hardirqs_on(void); +void __trace_hardirqs_off(void); + +#endif /* __TRACE_IRQ_H */ From 302e9edd54985f584cfc180098f3554774126969 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Wed, 23 Feb 2022 22:38:37 -0500 Subject: [PATCH 469/493] tracing: Have traceon and traceoff trigger honor the instance If a trigger is set on an event to disable or enable tracing within an instance, then tracing should be disabled or enabled in the instance and not at the top level, which is confusing to users. Link: https://lkml.kernel.org/r/20220223223837.14f94ec3@rorschach.local.home Cc: stable@vger.kernel.org Fixes: ae63b31e4d0e2 ("tracing: Separate out trace events from global variables") Tested-by: Daniel Bristot de Oliveira Reviewed-by: Tom Zanussi Signed-off-by: Steven Rostedt (Google) --- kernel/trace/trace_events_trigger.c | 52 +++++++++++++++++++++++++---- 1 file changed, 46 insertions(+), 6 deletions(-) diff --git a/kernel/trace/trace_events_trigger.c b/kernel/trace/trace_events_trigger.c index e0d50c9577f3b1..efe563140f27db 100644 --- a/kernel/trace/trace_events_trigger.c +++ b/kernel/trace/trace_events_trigger.c @@ -1295,6 +1295,16 @@ traceon_trigger(struct event_trigger_data *data, struct trace_buffer *buffer, void *rec, struct ring_buffer_event *event) { + struct trace_event_file *file = data->private_data; + + if (file) { + if (tracer_tracing_is_on(file->tr)) + return; + + tracer_tracing_on(file->tr); + return; + } + if (tracing_is_on()) return; @@ -1306,8 +1316,15 @@ traceon_count_trigger(struct event_trigger_data *data, struct trace_buffer *buffer, void *rec, struct ring_buffer_event *event) { - if (tracing_is_on()) - return; + struct trace_event_file *file = data->private_data; + + if (file) { + if (tracer_tracing_is_on(file->tr)) + return; + } else { + if (tracing_is_on()) + return; + } if (!data->count) return; @@ -1315,7 +1332,10 @@ traceon_count_trigger(struct event_trigger_data *data, if (data->count != -1) (data->count)--; - tracing_on(); + if (file) + tracer_tracing_on(file->tr); + else + tracing_on(); } static void @@ -1323,6 +1343,16 @@ traceoff_trigger(struct event_trigger_data *data, struct trace_buffer *buffer, void *rec, struct ring_buffer_event *event) { + struct trace_event_file *file = data->private_data; + + if (file) { + if (!tracer_tracing_is_on(file->tr)) + return; + + tracer_tracing_off(file->tr); + return; + } + if (!tracing_is_on()) return; @@ -1334,8 +1364,15 @@ traceoff_count_trigger(struct event_trigger_data *data, struct trace_buffer *buffer, void *rec, struct ring_buffer_event *event) { - if (!tracing_is_on()) - return; + struct trace_event_file *file = data->private_data; + + if (file) { + if (!tracer_tracing_is_on(file->tr)) + return; + } else { + if (!tracing_is_on()) + return; + } if (!data->count) return; @@ -1343,7 +1380,10 @@ traceoff_count_trigger(struct event_trigger_data *data, if (data->count != -1) (data->count)--; - tracing_off(); + if (file) + tracer_tracing_off(file->tr); + else + tracing_off(); } static int From b61edd57740de5895f44f2ea417b164d9e1708bb Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Fri, 18 Feb 2022 19:00:57 -0500 Subject: [PATCH 470/493] eprobes: Remove redundant event type information Currently, the event probes save the type of the event they are attached to when recording the event. For example: # echo 'e:switch sched/sched_switch prev_state=$prev_state prev_prio=$prev_prio next_pid=$next_pid next_prio=$next_prio' > dynamic_events # cat events/eprobes/switch/format name: switch ID: 1717 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:unsigned int __probe_type; offset:8; size:4; signed:0; field:u64 prev_state; offset:12; size:8; signed:0; field:u64 prev_prio; offset:20; size:8; signed:0; field:u64 next_pid; offset:28; size:8; signed:0; field:u64 next_prio; offset:36; size:8; signed:0; print fmt: "(%u) prev_state=0x%Lx prev_prio=0x%Lx next_pid=0x%Lx next_prio=0x%Lx", REC->__probe_type, REC->prev_state, REC->prev_prio, REC->next_pid, REC->next_prio The __probe_type adds 4 bytes to every event. One of the reasons for creating eprobes is to limit what is traced in an event to be able to limit what is written into the ring buffer. Having this redundant 4 bytes to every event takes away from this. The event that is recorded can be retrieved from the event probe itself, that is available when the trace is happening. For user space tools, it could simply read the dynamic_event file to find the event they are for. So there is really no reason to write this information into the ring buffer for every event. Link: https://lkml.kernel.org/r/20220218190057.2f5a19a8@gandalf.local.home Acked-by: Masami Hiramatsu Reviewed-by: Joel Fernandes Signed-off-by: Steven Rostedt (Google) --- kernel/trace/trace.h | 1 - kernel/trace/trace_eprobe.c | 16 +++++++--------- kernel/trace/trace_probe.c | 10 +++++----- kernel/trace/trace_probe.h | 1 - 4 files changed, 12 insertions(+), 16 deletions(-) diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index d038ddbf1beaa9..c5b09c31e07725 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -136,7 +136,6 @@ struct kprobe_trace_entry_head { struct eprobe_trace_entry_head { struct trace_entry ent; - unsigned int type; }; struct kretprobe_trace_entry_head { diff --git a/kernel/trace/trace_eprobe.c b/kernel/trace/trace_eprobe.c index 191db32dec4698..541aa13581b95c 100644 --- a/kernel/trace/trace_eprobe.c +++ b/kernel/trace/trace_eprobe.c @@ -242,7 +242,6 @@ static int trace_eprobe_tp_arg_update(struct trace_eprobe *ep, int i) static int eprobe_event_define_fields(struct trace_event_call *event_call) { - int ret; struct eprobe_trace_entry_head field; struct trace_probe *tp; @@ -250,8 +249,6 @@ static int eprobe_event_define_fields(struct trace_event_call *event_call) if (WARN_ON_ONCE(!tp)) return -ENOENT; - DEFINE_FIELD(unsigned int, type, FIELD_STRING_TYPE, 0); - return traceprobe_define_arg_fields(event_call, sizeof(field), tp); } @@ -270,7 +267,9 @@ print_eprobe_event(struct trace_iterator *iter, int flags, struct trace_event_call *pevent; struct trace_event *probed_event; struct trace_seq *s = &iter->seq; + struct trace_eprobe *ep; struct trace_probe *tp; + unsigned int type; field = (struct eprobe_trace_entry_head *)iter->ent; tp = trace_probe_primary_from_call( @@ -278,15 +277,18 @@ print_eprobe_event(struct trace_iterator *iter, int flags, if (WARN_ON_ONCE(!tp)) goto out; + ep = container_of(tp, struct trace_eprobe, tp); + type = ep->event->event.type; + trace_seq_printf(s, "%s: (", trace_probe_name(tp)); - probed_event = ftrace_find_event(field->type); + probed_event = ftrace_find_event(type); if (probed_event) { pevent = container_of(probed_event, struct trace_event_call, event); trace_seq_printf(s, "%s.%s", pevent->class->system, trace_event_name(pevent)); } else { - trace_seq_printf(s, "%u", field->type); + trace_seq_printf(s, "%u", type); } trace_seq_putc(s, ')'); @@ -498,10 +500,6 @@ __eprobe_trace_func(struct eprobe_data *edata, void *rec) return; entry = fbuffer.entry = ring_buffer_event_data(fbuffer.event); - if (edata->ep->event) - entry->type = edata->ep->event->event.type; - else - entry->type = 0; store_trace_args(&entry[1], &edata->ep->tp, rec, sizeof(*entry), dsize); trace_event_buffer_commit(&fbuffer); diff --git a/kernel/trace/trace_probe.c b/kernel/trace/trace_probe.c index 73d90179b51bd3..80863c6508e5e9 100644 --- a/kernel/trace/trace_probe.c +++ b/kernel/trace/trace_probe.c @@ -871,15 +871,15 @@ static int __set_print_fmt(struct trace_probe *tp, char *buf, int len, switch (ptype) { case PROBE_PRINT_NORMAL: fmt = "(%lx)"; - arg = "REC->" FIELD_STRING_IP; + arg = ", REC->" FIELD_STRING_IP; break; case PROBE_PRINT_RETURN: fmt = "(%lx <- %lx)"; - arg = "REC->" FIELD_STRING_FUNC ", REC->" FIELD_STRING_RETIP; + arg = ", REC->" FIELD_STRING_FUNC ", REC->" FIELD_STRING_RETIP; break; case PROBE_PRINT_EVENT: - fmt = "(%u)"; - arg = "REC->" FIELD_STRING_TYPE; + fmt = ""; + arg = ""; break; default: WARN_ON_ONCE(1); @@ -903,7 +903,7 @@ static int __set_print_fmt(struct trace_probe *tp, char *buf, int len, parg->type->fmt); } - pos += snprintf(buf + pos, LEN_OR_ZERO, "\", %s", arg); + pos += snprintf(buf + pos, LEN_OR_ZERO, "\"%s", arg); for (i = 0; i < tp->nr_args; i++) { parg = tp->args + i; diff --git a/kernel/trace/trace_probe.h b/kernel/trace/trace_probe.h index 99e7a5df025e2a..92cc149af0fde7 100644 --- a/kernel/trace/trace_probe.h +++ b/kernel/trace/trace_probe.h @@ -38,7 +38,6 @@ #define FIELD_STRING_IP "__probe_ip" #define FIELD_STRING_RETIP "__probe_ret_ip" #define FIELD_STRING_FUNC "__probe_func" -#define FIELD_STRING_TYPE "__probe_type" #undef DEFINE_FIELD #define DEFINE_FIELD(type, item, name, is_signed) \ From bc82c38a6933aab308387d4aca47e0a05de7b553 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Fri, 11 Feb 2022 08:10:18 +0100 Subject: [PATCH 471/493] tracing: Uninline trace_trigger_soft_disabled() partly On a powerpc32 build with CONFIG_CC_OPTIMISE_FOR_SIZE, the inline keyword is not honored and trace_trigger_soft_disabled() appears approx 50 times in vmlinux. Adding -Winline to the build, the following message appears: ./include/linux/trace_events.h:712:1: error: inlining failed in call to 'trace_trigger_soft_disabled': call is unlikely and code size would grow [-Werror=inline] That function is rather big for an inlined function: c003df60 : c003df60: 94 21 ff f0 stwu r1,-16(r1) c003df64: 7c 08 02 a6 mflr r0 c003df68: 90 01 00 14 stw r0,20(r1) c003df6c: bf c1 00 08 stmw r30,8(r1) c003df70: 83 e3 00 24 lwz r31,36(r3) c003df74: 73 e9 01 00 andi. r9,r31,256 c003df78: 41 82 00 10 beq c003df88 c003df7c: 38 60 00 00 li r3,0 c003df80: 39 61 00 10 addi r11,r1,16 c003df84: 4b fd 60 ac b c0014030 <_rest32gpr_30_x> c003df88: 73 e9 00 80 andi. r9,r31,128 c003df8c: 7c 7e 1b 78 mr r30,r3 c003df90: 41 a2 00 14 beq c003dfa4 c003df94: 38 c0 00 00 li r6,0 c003df98: 38 a0 00 00 li r5,0 c003df9c: 38 80 00 00 li r4,0 c003dfa0: 48 05 c5 f1 bl c009a590 c003dfa4: 73 e9 00 40 andi. r9,r31,64 c003dfa8: 40 82 00 28 bne c003dfd0 c003dfac: 73 ff 02 00 andi. r31,r31,512 c003dfb0: 41 82 ff cc beq c003df7c c003dfb4: 80 01 00 14 lwz r0,20(r1) c003dfb8: 83 e1 00 0c lwz r31,12(r1) c003dfbc: 7f c3 f3 78 mr r3,r30 c003dfc0: 83 c1 00 08 lwz r30,8(r1) c003dfc4: 7c 08 03 a6 mtlr r0 c003dfc8: 38 21 00 10 addi r1,r1,16 c003dfcc: 48 05 6f 6c b c0094f38 c003dfd0: 38 60 00 01 li r3,1 c003dfd4: 4b ff ff ac b c003df80 However it is located in a hot path so inlining it is important. But forcing inlining of the entire function by using __always_inline leads to increasing the text size by approx 20 kbytes. Instead, split the fonction in two parts, one part with the likely fast path, flagged __always_inline, and a second part out of line. With this change, on a powerpc32 with CONFIG_CC_OPTIMISE_FOR_SIZE vmlinux text increases by only 1,4 kbytes, which is partly compensated by a decrease of vmlinux data by 7 kbytes. On ppc64_defconfig which has CONFIG_CC_OPTIMISE_FOR_SPEED, this change reduces vmlinux text by more than 30 kbytes. Link: https://lkml.kernel.org/r/69ce0986a52d026d381d612801d978aa4f977460.1644563295.git.christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy Signed-off-by: Steven Rostedt (Google) --- include/linux/trace_events.h | 22 ++++++++++++---------- kernel/trace/trace_events_trigger.c | 14 ++++++++++++++ 2 files changed, 26 insertions(+), 10 deletions(-) diff --git a/include/linux/trace_events.h b/include/linux/trace_events.h index 70c069aef02ca8..dcea51fb60e276 100644 --- a/include/linux/trace_events.h +++ b/include/linux/trace_events.h @@ -699,6 +699,8 @@ event_triggers_post_call(struct trace_event_file *file, bool trace_event_ignore_this_pid(struct trace_event_file *trace_file); +bool __trace_trigger_soft_disabled(struct trace_event_file *file); + /** * trace_trigger_soft_disabled - do triggers and test if soft disabled * @file: The file pointer of the event to test @@ -708,20 +710,20 @@ bool trace_event_ignore_this_pid(struct trace_event_file *trace_file); * triggers that require testing the fields, it will return true, * otherwise false. */ -static inline bool +static __always_inline bool trace_trigger_soft_disabled(struct trace_event_file *file) { unsigned long eflags = file->flags; - if (!(eflags & EVENT_FILE_FL_TRIGGER_COND)) { - if (eflags & EVENT_FILE_FL_TRIGGER_MODE) - event_triggers_call(file, NULL, NULL, NULL); - if (eflags & EVENT_FILE_FL_SOFT_DISABLED) - return true; - if (eflags & EVENT_FILE_FL_PID_FILTER) - return trace_event_ignore_this_pid(file); - } - return false; + if (likely(!(eflags & (EVENT_FILE_FL_TRIGGER_MODE | + EVENT_FILE_FL_SOFT_DISABLED | + EVENT_FILE_FL_PID_FILTER)))) + return false; + + if (likely(eflags & EVENT_FILE_FL_TRIGGER_COND)) + return false; + + return __trace_trigger_soft_disabled(file); } #ifdef CONFIG_BPF_EVENTS diff --git a/kernel/trace/trace_events_trigger.c b/kernel/trace/trace_events_trigger.c index efe563140f27db..7eb9d04f1c2ea2 100644 --- a/kernel/trace/trace_events_trigger.c +++ b/kernel/trace/trace_events_trigger.c @@ -84,6 +84,20 @@ event_triggers_call(struct trace_event_file *file, } EXPORT_SYMBOL_GPL(event_triggers_call); +bool __trace_trigger_soft_disabled(struct trace_event_file *file) +{ + unsigned long eflags = file->flags; + + if (eflags & EVENT_FILE_FL_TRIGGER_MODE) + event_triggers_call(file, NULL, NULL, NULL); + if (eflags & EVENT_FILE_FL_SOFT_DISABLED) + return true; + if (eflags & EVENT_FILE_FL_PID_FILTER) + return trace_event_ignore_this_pid(file); + return false; +} +EXPORT_SYMBOL_GPL(__trace_trigger_soft_disabled); + /** * event_triggers_post_call - Call 'post_triggers' for a trace event * @file: The trace_event_file associated with the event From 7acf3a127bb7c65ff39099afd78960e77b2ca5de Mon Sep 17 00:00:00 2001 From: Sven Schnelle Date: Mon, 14 Feb 2022 14:44:56 +0100 Subject: [PATCH 472/493] tracing: Ensure trace buffer is at least 4096 bytes large Booting the kernel with 'trace_buf_size=1' give a warning at boot during the ftrace selftests: [ 0.892809] Running postponed tracer tests: [ 0.892893] Testing tracer function: [ 0.901899] Callback from call_rcu_tasks_trace() invoked. [ 0.983829] Callback from call_rcu_tasks_rude() invoked. [ 1.072003] .. bad ring buffer .. corrupted trace buffer .. [ 1.091944] Callback from call_rcu_tasks() invoked. [ 1.097695] PASSED [ 1.097701] Testing dynamic ftrace: .. filter failed count=0 ..FAILED! [ 1.353474] ------------[ cut here ]------------ [ 1.353478] WARNING: CPU: 0 PID: 1 at kernel/trace/trace.c:1951 run_tracer_selftest+0x13c/0x1b0 Therefore enforce a minimum of 4096 bytes to make the selftest pass. Link: https://lkml.kernel.org/r/20220214134456.1751749-1-svens@linux.ibm.com Signed-off-by: Sven Schnelle Signed-off-by: Steven Rostedt (Google) --- kernel/trace/trace.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 7c2578efde26d4..3050892d1812a5 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -1474,10 +1474,12 @@ static int __init set_buf_size(char *str) if (!str) return 0; buf_size = memparse(str, &str); - /* nr_entries can not be zero */ - if (buf_size == 0) - return 0; - trace_buf_size = buf_size; + /* + * nr_entries can not be zero and the startup + * tests require some buffer space. Therefore + * ensure we have at least 4096 bytes of buffer. + */ + trace_buf_size = max(4096UL, buf_size); return 1; } __setup("trace_buf_size=", set_buf_size); From ab2f993c01f261aa3eeb8842842ff38bff7806b6 Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Mon, 14 Feb 2022 12:28:47 -0700 Subject: [PATCH 473/493] ftrace: Remove unused ftrace_startup_enable() stub When building with clang + CONFIG_DYNAMIC_FTRACE=n + W=1, there is a warning: kernel/trace/ftrace.c:7194:20: error: unused function 'ftrace_startup_enable' [-Werror,-Wunused-function] static inline void ftrace_startup_enable(int command) { } ^ 1 error generated. Clang warns on instances of static inline functions in .c files with W=1 after commit 6863f5643dd7 ("kbuild: allow Clang to find unused static inline functions for W=1 build"). The ftrace_startup_enable() stub has been unused since commit e1effa0144a1 ("ftrace: Annotate the ops operation on update"), where its use outside of the CONFIG_DYNAMIC_TRACE section was replaced by ftrace_startup_all(). Remove it to resolve the warning. Link: https://lkml.kernel.org/r/20220214192847.488166-1-nathan@kernel.org Reported-by: kernel test robot Signed-off-by: Nathan Chancellor Signed-off-by: Steven Rostedt (Google) --- kernel/trace/ftrace.c | 1 - 1 file changed, 1 deletion(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index f9feb197b2daaf..a4b462b6f944cc 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -7191,7 +7191,6 @@ static int __init ftrace_nodyn_init(void) core_initcall(ftrace_nodyn_init); static inline int ftrace_init_dyn_tracefs(struct dentry *d_tracer) { return 0; } -static inline void ftrace_startup_enable(int command) { } static inline void ftrace_startup_all(int command) { } # define ftrace_startup_sysctl() do { } while (0) From dd990352f01ee9a6c6eee152e5d11c021caccfe4 Mon Sep 17 00:00:00 2001 From: Daniel Bristot de Oliveira Date: Fri, 18 Feb 2022 16:17:38 +0100 Subject: [PATCH 474/493] tracing/osnoise: Make osnoise_main to sleep for microseconds osnoise's runtime and period are in the microseconds scale, but it is currently sleeping in the millisecond's scale. This behavior roots in the usage of hwlat as the skeleton for osnoise. Make osnoise to sleep in the microseconds scale. Also, move the sleep to a specialized function. Link: https://lkml.kernel.org/r/302aa6c7bdf2d131719b22901905e9da122a11b2.1645197336.git.bristot@kernel.org Cc: Ingo Molnar Signed-off-by: Daniel Bristot de Oliveira Signed-off-by: Steven Rostedt (Google) --- kernel/trace/trace_osnoise.c | 53 ++++++++++++++++++++++-------------- 1 file changed, 32 insertions(+), 21 deletions(-) diff --git a/kernel/trace/trace_osnoise.c b/kernel/trace/trace_osnoise.c index 870a08da5b4895..cfddb30e65ab87 100644 --- a/kernel/trace/trace_osnoise.c +++ b/kernel/trace/trace_osnoise.c @@ -1436,6 +1436,37 @@ static int run_osnoise(void) static struct cpumask osnoise_cpumask; static struct cpumask save_cpumask; +/* + * osnoise_sleep - sleep until the next period + */ +static void osnoise_sleep(void) +{ + u64 interval; + ktime_t wake_time; + + mutex_lock(&interface_lock); + interval = osnoise_data.sample_period - osnoise_data.sample_runtime; + mutex_unlock(&interface_lock); + + /* + * differently from hwlat_detector, the osnoise tracer can run + * without a pause because preemption is on. + */ + if (!interval) { + /* Let synchronize_rcu_tasks() make progress */ + cond_resched_tasks_rcu_qs(); + return; + } + + wake_time = ktime_add_us(ktime_get(), interval); + __set_current_state(TASK_INTERRUPTIBLE); + + while (schedule_hrtimeout_range(&wake_time, 0, HRTIMER_MODE_ABS)) { + if (kthread_should_stop()) + break; + } +} + /* * osnoise_main - The osnoise detection kernel thread * @@ -1444,30 +1475,10 @@ static struct cpumask save_cpumask; */ static int osnoise_main(void *data) { - u64 interval; while (!kthread_should_stop()) { - run_osnoise(); - - mutex_lock(&interface_lock); - interval = osnoise_data.sample_period - osnoise_data.sample_runtime; - mutex_unlock(&interface_lock); - - do_div(interval, USEC_PER_MSEC); - - /* - * differently from hwlat_detector, the osnoise tracer can run - * without a pause because preemption is on. - */ - if (interval < 1) { - /* Let synchronize_rcu_tasks() make progress */ - cond_resched_tasks_rcu_qs(); - continue; - } - - if (msleep_interruptible(interval)) - break; + osnoise_sleep(); } return 0; From 22e9f71072fa605cbf033158db58e0790101928d Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Wed, 23 Feb 2022 11:23:57 -0400 Subject: [PATCH 475/493] RDMA/cma: Do not change route.addr.src_addr outside state checks If the state is not idle then resolve_prepare_src() should immediately fail and no change to global state should happen. However, it unconditionally overwrites the src_addr trying to build a temporary any address. For instance if the state is already RDMA_CM_LISTEN then this will corrupt the src_addr and would cause the test in cma_cancel_operation(): if (cma_any_addr(cma_src_addr(id_priv)) && !id_priv->cma_dev) Which would manifest as this trace from syzkaller: BUG: KASAN: use-after-free in __list_add_valid+0x93/0xa0 lib/list_debug.c:26 Read of size 8 at addr ffff8881546491e0 by task syz-executor.1/32204 CPU: 1 PID: 32204 Comm: syz-executor.1 Not tainted 5.12.0-rc8-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x141/0x1d7 lib/dump_stack.c:120 print_address_description.constprop.0.cold+0x5b/0x2f8 mm/kasan/report.c:232 __kasan_report mm/kasan/report.c:399 [inline] kasan_report.cold+0x7c/0xd8 mm/kasan/report.c:416 __list_add_valid+0x93/0xa0 lib/list_debug.c:26 __list_add include/linux/list.h:67 [inline] list_add_tail include/linux/list.h:100 [inline] cma_listen_on_all drivers/infiniband/core/cma.c:2557 [inline] rdma_listen+0x787/0xe00 drivers/infiniband/core/cma.c:3751 ucma_listen+0x16a/0x210 drivers/infiniband/core/ucma.c:1102 ucma_write+0x259/0x350 drivers/infiniband/core/ucma.c:1732 vfs_write+0x28e/0xa30 fs/read_write.c:603 ksys_write+0x1ee/0x250 fs/read_write.c:658 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae This is indicating that an rdma_id_private was destroyed without doing cma_cancel_listens(). Instead of trying to re-use the src_addr memory to indirectly create an any address derived from the dst build one explicitly on the stack and bind to that as any other normal flow would do. rdma_bind_addr() will copy it over the src_addr once it knows the state is valid. This is similar to commit bc0bdc5afaa7 ("RDMA/cma: Do not change route.addr.src_addr.ss_family") Link: https://lore.kernel.org/r/0-v2-e975c8fd9ef2+11e-syz_cma_srcaddr_jgg@nvidia.com Cc: stable@vger.kernel.org Fixes: 732d41c545bb ("RDMA/cma: Make the locking for automatic state transition more clear") Reported-by: syzbot+c94a3675a626f6333d74@syzkaller.appspotmail.com Reviewed-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/cma.c | 40 +++++++++++++++++++++-------------- 1 file changed, 24 insertions(+), 16 deletions(-) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index c447526288f49e..50c53409ceb61b 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -3370,22 +3370,30 @@ static int cma_resolve_ib_addr(struct rdma_id_private *id_priv) static int cma_bind_addr(struct rdma_cm_id *id, struct sockaddr *src_addr, const struct sockaddr *dst_addr) { - if (!src_addr || !src_addr->sa_family) { - src_addr = (struct sockaddr *) &id->route.addr.src_addr; - src_addr->sa_family = dst_addr->sa_family; - if (IS_ENABLED(CONFIG_IPV6) && - dst_addr->sa_family == AF_INET6) { - struct sockaddr_in6 *src_addr6 = (struct sockaddr_in6 *) src_addr; - struct sockaddr_in6 *dst_addr6 = (struct sockaddr_in6 *) dst_addr; - src_addr6->sin6_scope_id = dst_addr6->sin6_scope_id; - if (ipv6_addr_type(&dst_addr6->sin6_addr) & IPV6_ADDR_LINKLOCAL) - id->route.addr.dev_addr.bound_dev_if = dst_addr6->sin6_scope_id; - } else if (dst_addr->sa_family == AF_IB) { - ((struct sockaddr_ib *) src_addr)->sib_pkey = - ((struct sockaddr_ib *) dst_addr)->sib_pkey; - } - } - return rdma_bind_addr(id, src_addr); + struct sockaddr_storage zero_sock = {}; + + if (src_addr && src_addr->sa_family) + return rdma_bind_addr(id, src_addr); + + /* + * When the src_addr is not specified, automatically supply an any addr + */ + zero_sock.ss_family = dst_addr->sa_family; + if (IS_ENABLED(CONFIG_IPV6) && dst_addr->sa_family == AF_INET6) { + struct sockaddr_in6 *src_addr6 = + (struct sockaddr_in6 *)&zero_sock; + struct sockaddr_in6 *dst_addr6 = + (struct sockaddr_in6 *)dst_addr; + + src_addr6->sin6_scope_id = dst_addr6->sin6_scope_id; + if (ipv6_addr_type(&dst_addr6->sin6_addr) & IPV6_ADDR_LINKLOCAL) + id->route.addr.dev_addr.bound_dev_if = + dst_addr6->sin6_scope_id; + } else if (dst_addr->sa_family == AF_IB) { + ((struct sockaddr_ib *)&zero_sock)->sib_pkey = + ((struct sockaddr_ib *)dst_addr)->sib_pkey; + } + return rdma_bind_addr(id, (struct sockaddr *)&zero_sock); } /* From 851e99ebeec3f4a672bb5010cf1ece095acee447 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Fri, 25 Feb 2022 15:34:26 -0500 Subject: [PATCH 476/493] tracefs: Set the group ownership in apply_options() not parse_options() Al Viro brought it to my attention that the dentries may not be filled when the parse_options() is called, causing the call to set_gid() to possibly crash. It should only be called if parse_options() succeeds totally anyway. He suggested the logical place to do the update is in apply_options(). Link: https://lore.kernel.org/all/20220225165219.737025658@goodmis.org/ Link: https://lkml.kernel.org/r/20220225153426.1c4cab6b@gandalf.local.home Cc: stable@vger.kernel.org Acked-by: Al Viro Reported-by: Al Viro Fixes: 48b27b6b5191 ("tracefs: Set all files to the same group ownership as the mount option") Signed-off-by: Steven Rostedt (Google) --- fs/tracefs/inode.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/tracefs/inode.c b/fs/tracefs/inode.c index bafc02bf82203a..de7252715b1251 100644 --- a/fs/tracefs/inode.c +++ b/fs/tracefs/inode.c @@ -264,7 +264,6 @@ static int tracefs_parse_options(char *data, struct tracefs_mount_opts *opts) if (!gid_valid(gid)) return -EINVAL; opts->gid = gid; - set_gid(tracefs_mount->mnt_root, gid); break; case Opt_mode: if (match_octal(&args[0], &option)) @@ -291,7 +290,9 @@ static int tracefs_apply_options(struct super_block *sb) inode->i_mode |= opts->mode; inode->i_uid = opts->uid; - inode->i_gid = opts->gid; + + /* Set all the group ids to the mount option */ + set_gid(sb->s_root, opts->gid); return 0; } From c5229a0bd47814770c895e94fbc97ad21819abfe Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Mon, 20 Dec 2021 16:38:06 +0000 Subject: [PATCH 477/493] tracing: Fix selftest config check for function graph start up test CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS is required to test direct tramp. Link: https://lkml.kernel.org/r/bdc7e594e13b0891c1d61bc8d56c94b1890eaed7.1640017960.git.christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy Signed-off-by: Steven Rostedt (Google) --- kernel/trace/trace_selftest.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c index afd937a46496ed..abcadbe933bb76 100644 --- a/kernel/trace/trace_selftest.c +++ b/kernel/trace/trace_selftest.c @@ -784,9 +784,7 @@ static struct fgraph_ops fgraph_ops __initdata = { .retfunc = &trace_graph_return, }; -#if defined(CONFIG_DYNAMIC_FTRACE) && \ - defined(CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS) -#define TEST_DIRECT_TRAMP +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS noinline __noclone static void trace_direct_tramp(void) { } #endif @@ -849,7 +847,7 @@ trace_selftest_startup_function_graph(struct tracer *trace, goto out; } -#ifdef TEST_DIRECT_TRAMP +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS tracing_reset_online_cpus(&tr->array_buffer); set_graph_array(tr); From dd48f316a1216fa10f9ba26852457794417d9bc6 Mon Sep 17 00:00:00 2001 From: Daniel Bristot de Oliveira Date: Fri, 18 Feb 2022 18:57:07 +0100 Subject: [PATCH 478/493] rtla/hist: Make -E the short version of --entries Currently, --entries uses -e as the short version in the hist mode of timerlat and osnoise tools. But as -e is already used to enable events on trace sessions by other tools, thus let's keep it available for the same usage for all rtla tools. Make -E the short version of --entries for hist mode on all tools. Note: rtla was merged in this merge window, so rtla was not released yet. Link: https://lkml.kernel.org/r/5dbf0cbe7364d3a05e708926b41a097c59a02b1e.1645206561.git.bristot@kernel.org Cc: Jonathan Corbet Signed-off-by: Daniel Bristot de Oliveira Signed-off-by: Steven Rostedt (Google) --- Documentation/tools/rtla/common_hist_options.rst | 2 +- Documentation/tools/rtla/rtla-osnoise-hist.rst | 2 +- tools/tracing/rtla/src/osnoise_hist.c | 10 +++++----- tools/tracing/rtla/src/timerlat_hist.c | 10 +++++----- 4 files changed, 12 insertions(+), 12 deletions(-) diff --git a/Documentation/tools/rtla/common_hist_options.rst b/Documentation/tools/rtla/common_hist_options.rst index 0266cd08a6c929..df53ff835bfb66 100644 --- a/Documentation/tools/rtla/common_hist_options.rst +++ b/Documentation/tools/rtla/common_hist_options.rst @@ -2,7 +2,7 @@ Set the histogram bucket size (default *1*). -**-e**, **--entries** *N* +**-E**, **--entries** *N* Set the number of entries of the histogram (default 256). diff --git a/Documentation/tools/rtla/rtla-osnoise-hist.rst b/Documentation/tools/rtla/rtla-osnoise-hist.rst index 52298ddd8701b2..f2e79d22c4c43f 100644 --- a/Documentation/tools/rtla/rtla-osnoise-hist.rst +++ b/Documentation/tools/rtla/rtla-osnoise-hist.rst @@ -36,7 +36,7 @@ default). The reason for reducing the runtime is to avoid starving the **rtla** tool. The tool is also set to run for *one minute*. The output histogram is set to group outputs in buckets of *10us* and *25* entries:: - [root@f34 ~/]# rtla osnoise hist -P F:1 -c 0-11 -r 900000 -d 1M -b 10 -e 25 + [root@f34 ~/]# rtla osnoise hist -P F:1 -c 0-11 -r 900000 -d 1M -b 10 -E 25 # RTLA osnoise histogram # Time unit is microseconds (us) # Duration: 0 00:01:00 diff --git a/tools/tracing/rtla/src/osnoise_hist.c b/tools/tracing/rtla/src/osnoise_hist.c index 1f0b7fce55cf68..52c053cc1789d9 100644 --- a/tools/tracing/rtla/src/osnoise_hist.c +++ b/tools/tracing/rtla/src/osnoise_hist.c @@ -426,7 +426,7 @@ static void osnoise_hist_usage(char *usage) static const char * const msg[] = { "", " usage: rtla osnoise hist [-h] [-D] [-d s] [-p us] [-r us] [-s us] [-S us] [-t[=file]] \\", - " [-c cpu-list] [-P priority] [-b N] [-e N] [--no-header] [--no-summary] \\", + " [-c cpu-list] [-P priority] [-b N] [-E N] [--no-header] [--no-summary] \\", " [--no-index] [--with-zeros]", "", " -h/--help: print this menu", @@ -439,7 +439,7 @@ static void osnoise_hist_usage(char *usage) " -D/--debug: print debug info", " -t/--trace[=file]: save the stopped trace to [file|osnoise_trace.txt]", " -b/--bucket-size N: set the histogram bucket size (default 1)", - " -e/--entries N: set the number of entries of the histogram (default 256)", + " -E/--entries N: set the number of entries of the histogram (default 256)", " --no-header: do not print header", " --no-summary: do not print summary", " --no-index: do not print index", @@ -486,7 +486,7 @@ static struct osnoise_hist_params while (1) { static struct option long_options[] = { {"bucket-size", required_argument, 0, 'b'}, - {"entries", required_argument, 0, 'e'}, + {"entries", required_argument, 0, 'E'}, {"cpus", required_argument, 0, 'c'}, {"debug", no_argument, 0, 'D'}, {"duration", required_argument, 0, 'd'}, @@ -507,7 +507,7 @@ static struct osnoise_hist_params /* getopt_long stores the option index here. */ int option_index = 0; - c = getopt_long(argc, argv, "c:b:d:e:Dhp:P:r:s:S:t::0123", + c = getopt_long(argc, argv, "c:b:d:E:Dhp:P:r:s:S:t::0123", long_options, &option_index); /* detect the end of the options. */ @@ -534,7 +534,7 @@ static struct osnoise_hist_params if (!params->duration) osnoise_hist_usage("Invalid -D duration\n"); break; - case 'e': + case 'E': params->entries = get_llong_from_str(optarg); if ((params->entries < 10) || (params->entries > 9999999)) osnoise_hist_usage("Entries must be > 10 and < 9999999\n"); diff --git a/tools/tracing/rtla/src/timerlat_hist.c b/tools/tracing/rtla/src/timerlat_hist.c index 436a799f9adf9f..237e1735afa7c0 100644 --- a/tools/tracing/rtla/src/timerlat_hist.c +++ b/tools/tracing/rtla/src/timerlat_hist.c @@ -429,7 +429,7 @@ static void timerlat_hist_usage(char *usage) char *msg[] = { "", " usage: [rtla] timerlat hist [-h] [-q] [-d s] [-D] [-n] [-p us] [-i us] [-T us] [-s us] [-t[=file]] \\", - " [-c cpu-list] [-P priority] [-e N] [-b N] [--no-irq] [--no-thread] [--no-header] [--no-summary] \\", + " [-c cpu-list] [-P priority] [-E N] [-b N] [--no-irq] [--no-thread] [--no-header] [--no-summary] \\", " [--no-index] [--with-zeros]", "", " -h/--help: print this menu", @@ -443,7 +443,7 @@ static void timerlat_hist_usage(char *usage) " -T/--trace[=file]: save the stopped trace to [file|timerlat_trace.txt]", " -n/--nano: display data in nanoseconds", " -b/--bucket-size N: set the histogram bucket size (default 1)", - " -e/--entries N: set the number of entries of the histogram (default 256)", + " -E/--entries N: set the number of entries of the histogram (default 256)", " --no-irq: ignore IRQ latencies", " --no-thread: ignore thread latencies", " --no-header: do not print header", @@ -494,7 +494,7 @@ static struct timerlat_hist_params {"cpus", required_argument, 0, 'c'}, {"bucket-size", required_argument, 0, 'b'}, {"debug", no_argument, 0, 'D'}, - {"entries", required_argument, 0, 'e'}, + {"entries", required_argument, 0, 'E'}, {"duration", required_argument, 0, 'd'}, {"help", no_argument, 0, 'h'}, {"irq", required_argument, 0, 'i'}, @@ -516,7 +516,7 @@ static struct timerlat_hist_params /* getopt_long stores the option index here. */ int option_index = 0; - c = getopt_long(argc, argv, "c:b:d:e:Dhi:np:P:s:t::T:012345", + c = getopt_long(argc, argv, "c:b:d:E:Dhi:np:P:s:t::T:012345", long_options, &option_index); /* detect the end of the options. */ @@ -543,7 +543,7 @@ static struct timerlat_hist_params if (!params->duration) timerlat_hist_usage("Invalid -D duration\n"); break; - case 'e': + case 'E': params->entries = get_llong_from_str(optarg); if ((params->entries < 10) || (params->entries > 9999999)) timerlat_hist_usage("Entries must be > 10 and < 9999999\n"); From 316f710172461c501f9b73f3b2fc7ce8aa5b84a5 Mon Sep 17 00:00:00 2001 From: Daniel Bristot de Oliveira Date: Fri, 18 Feb 2022 18:57:08 +0100 Subject: [PATCH 479/493] rtla/osnoise: Free params at the exit The variable that stores the parsed command line arguments are not being free()d at the rtla osnoise top exit path. Free params variable before exiting. Link: https://lkml.kernel.org/r/0be31d8259c7c53b98a39769d60cfeecd8421785.1645206561.git.bristot@kernel.org Fixes: 1eceb2fc2ca5 ("rtla/osnoise: Add osnoise top mode") Cc: Jonathan Corbet Signed-off-by: Daniel Bristot de Oliveira Signed-off-by: Steven Rostedt (Google) --- tools/tracing/rtla/src/osnoise_top.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/tracing/rtla/src/osnoise_top.c b/tools/tracing/rtla/src/osnoise_top.c index c67dc28ef716af..7af769b9c0dee1 100644 --- a/tools/tracing/rtla/src/osnoise_top.c +++ b/tools/tracing/rtla/src/osnoise_top.c @@ -573,6 +573,7 @@ int osnoise_top_main(int argc, char **argv) osnoise_free_top(tool->data); osnoise_destroy_tool(record); osnoise_destroy_tool(tool); + free(params); out_exit: exit(return_value); } From 90f59ee41abf587ad4675a70434136c8707fdf4b Mon Sep 17 00:00:00 2001 From: Daniel Bristot de Oliveira Date: Fri, 18 Feb 2022 18:57:09 +0100 Subject: [PATCH 480/493] rtla/osnoise: Fix error message when failing to enable trace instance When a trace instance creation fails, tools are printing: Could not enable -> osnoiser <- tracer for tracing Print the actual (and correct) name of the tracer it fails to enable. Link: https://lkml.kernel.org/r/53ef0582605af91eca14b19dba9fc9febb95d4f9.1645206561.git.bristot@kernel.org Fixes: b1696371d865 ("rtla: Helper functions for rtla") Cc: Jonathan Corbet Signed-off-by: Daniel Bristot de Oliveira Signed-off-by: Steven Rostedt (Google) --- tools/tracing/rtla/src/osnoise.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/tracing/rtla/src/osnoise.c b/tools/tracing/rtla/src/osnoise.c index 5648f9252e5808..e60f1862bad099 100644 --- a/tools/tracing/rtla/src/osnoise.c +++ b/tools/tracing/rtla/src/osnoise.c @@ -810,7 +810,7 @@ struct osnoise_tool *osnoise_init_trace_tool(char *tracer) retval = enable_tracer_by_name(trace->trace.inst, tracer); if (retval) { - err_msg("Could not enable osnoiser tracer for tracing\n"); + err_msg("Could not enable %s tracer for tracing\n", tracer); goto out_err; } From bbcf7b0e2e4b8376ef4b401777f2852302c745e3 Mon Sep 17 00:00:00 2001 From: Luis Chamberlain Date: Fri, 25 Feb 2022 19:10:53 -0800 Subject: [PATCH 481/493] MAINTAINERS: add sysctl-next git tree Add a git tree for sysctls as there's been quite a bit of work lately to remove all the syctls out of kernel/sysctl.c and move to their respective places, so coordination has been needed to avoid conflicts. This tree will also help soak these changes on linux-next prior to getting to Linus. Link: https://lkml.kernel.org/r/20220218182736.3694508-1-mcgrof@kernel.org Signed-off-by: Luis Chamberlain Cc: Kees Cook Cc: Iurii Zaikin Cc: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 2524b75763cd47..71498bb8a1429c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15567,6 +15567,7 @@ M: Iurii Zaikin L: linux-kernel@vger.kernel.org L: linux-fsdevel@vger.kernel.org S: Maintained +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux.git sysctl-next F: fs/proc/proc_sysctl.c F: include/linux/sysctl.h F: kernel/sysctl-test.c From db110a99d3367936058727ff4798e3a39c707969 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Fri, 25 Feb 2022 19:10:56 -0800 Subject: [PATCH 482/493] mm/hugetlb: fix kernel crash with hugetlb mremap This fixes the below crash: kernel BUG at include/linux/mm.h:2373! cpu 0x5d: Vector: 700 (Program Check) at [c00000003c6e76e0] pc: c000000000581a54: pmd_to_page+0x54/0x80 lr: c00000000058d184: move_hugetlb_page_tables+0x4e4/0x5b0 sp: c00000003c6e7980 msr: 9000000000029033 current = 0xc00000003bd8d980 paca = 0xc000200fff610100 irqmask: 0x03 irq_happened: 0x01 pid = 9349, comm = hugepage-mremap kernel BUG at include/linux/mm.h:2373! move_hugetlb_page_tables+0x4e4/0x5b0 (link register) move_hugetlb_page_tables+0x22c/0x5b0 (unreliable) move_page_tables+0xdbc/0x1010 move_vma+0x254/0x5f0 sys_mremap+0x7c0/0x900 system_call_exception+0x160/0x2c0 the kernel can't use huge_pte_offset before it set the pte entry because a page table lookup check for huge PTE bit in the page table to differentiate between a huge pte entry and a pointer to pte page. A huge_pte_alloc won't mark the page table entry huge and hence kernel should not use huge_pte_offset after a huge_pte_alloc. Link: https://lkml.kernel.org/r/20220211063221.99293-1-aneesh.kumar@linux.ibm.com Fixes: 550a7d60bd5e ("mm, hugepages: add mremap() support for hugepage backed vma") Signed-off-by: Aneesh Kumar K.V Reviewed-by: Mike Kravetz Reviewed-by: Mina Almasry Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 61895cc01d0980..e57650a9404f7c 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -4851,14 +4851,13 @@ int copy_hugetlb_page_range(struct mm_struct *dst, struct mm_struct *src, } static void move_huge_pte(struct vm_area_struct *vma, unsigned long old_addr, - unsigned long new_addr, pte_t *src_pte) + unsigned long new_addr, pte_t *src_pte, pte_t *dst_pte) { struct hstate *h = hstate_vma(vma); struct mm_struct *mm = vma->vm_mm; - pte_t *dst_pte, pte; spinlock_t *src_ptl, *dst_ptl; + pte_t pte; - dst_pte = huge_pte_offset(mm, new_addr, huge_page_size(h)); dst_ptl = huge_pte_lock(h, mm, dst_pte); src_ptl = huge_pte_lockptr(h, mm, src_pte); @@ -4917,7 +4916,7 @@ int move_hugetlb_page_tables(struct vm_area_struct *vma, if (!dst_pte) break; - move_huge_pte(vma, old_addr, new_addr, src_pte); + move_huge_pte(vma, old_addr, new_addr, src_pte, dst_pte); } flush_tlb_range(vma, old_end - len, old_end); mmu_notifier_invalidate_range_end(&range); From 70effdc3756c924f4a2b6af1ec4e2e92e18e1b45 Mon Sep 17 00:00:00 2001 From: Andrey Konovalov Date: Fri, 25 Feb 2022 19:10:59 -0800 Subject: [PATCH 483/493] kasan: test: prevent cache merging in kmem_cache_double_destroy With HW_TAGS KASAN and kasan.stacktrace=off, the cache created in the kmem_cache_double_destroy() test might get merged with an existing one. Thus, the first kmem_cache_destroy() call won't actually destroy it but will only decrease the refcount. This causes the test to fail. Provide an empty constructor for the created cache to prevent the cache from getting merged. Link: https://lkml.kernel.org/r/b597bd434c49591d8af00ee3993a42c609dc9a59.1644346040.git.andreyknvl@google.com Fixes: f98f966cd750 ("kasan: test: add test case for double-kmem_cache_destroy()") Signed-off-by: Andrey Konovalov Reviewed-by: Marco Elver Cc: Alexander Potapenko Cc: Dmitry Vyukov Cc: Andrey Ryabinin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/test_kasan.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/lib/test_kasan.c b/lib/test_kasan.c index 26a5c9007653aa..3b413f8c8a7154 100644 --- a/lib/test_kasan.c +++ b/lib/test_kasan.c @@ -869,11 +869,14 @@ static void kmem_cache_invalid_free(struct kunit *test) kmem_cache_destroy(cache); } +static void empty_cache_ctor(void *object) { } + static void kmem_cache_double_destroy(struct kunit *test) { struct kmem_cache *cache; - cache = kmem_cache_create("test_cache", 200, 0, 0, NULL); + /* Provide a constructor to prevent cache merging. */ + cache = kmem_cache_create("test_cache", 200, 0, 0, empty_cache_ctor); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, cache); kmem_cache_destroy(cache); KUNIT_EXPECT_KASAN_FAIL(test, kmem_cache_destroy(cache)); From e79ce9832316e09529b212a21278d68240ccbf1f Mon Sep 17 00:00:00 2001 From: Liu Yuntao Date: Fri, 25 Feb 2022 19:11:02 -0800 Subject: [PATCH 484/493] hugetlbfs: fix a truncation issue in hugepages parameter When we specify a large number for node in hugepages parameter, it may be parsed to another number due to truncation in this statement: node = tmp; For example, add following parameter in command line: hugepagesz=1G hugepages=4294967297:5 and kernel will allocate 5 hugepages for node 1 instead of ignoring it. I move the validation check earlier to fix this issue, and slightly simplifies the condition here. Link: https://lkml.kernel.org/r/20220209134018.8242-1-liuyuntao10@huawei.com Fixes: b5389086ad7be0 ("hugetlbfs: extend the definition of hugepages parameter to support node allocation") Signed-off-by: Liu Yuntao Reviewed-by: Mike Kravetz Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index e57650a9404f7c..f294db835f4bc4 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -4159,10 +4159,10 @@ static int __init hugepages_setup(char *s) pr_warn("HugeTLB: architecture can't support node specific alloc, ignoring!\n"); return 0; } + if (tmp >= nr_online_nodes) + goto invalid; node = tmp; p += count + 1; - if (node < 0 || node >= nr_online_nodes) - goto invalid; /* Parse hugepages */ if (sscanf(p, "%lu%n", &tmp, &count) != 1) goto invalid; From f798a1d4f94de9510e060d37b9b47721065a957c Mon Sep 17 00:00:00 2001 From: Suren Baghdasaryan Date: Fri, 25 Feb 2022 19:11:05 -0800 Subject: [PATCH 485/493] mm: fix use-after-free bug when mm->mmap is reused after being freed oom reaping (__oom_reap_task_mm) relies on a 2 way synchronization with exit_mmap. First it relies on the mmap_lock to exclude from unlock path[1], page tables tear down (free_pgtables) and vma destruction. This alone is not sufficient because mm->mmap is never reset. For historical reasons[2] the lock is taken there is also MMF_OOM_SKIP set for oom victims before. The oom reaper only ever looks at oom victims so the whole scheme works properly but process_mrelease can opearate on any task (with fatal signals pending) which doesn't really imply oom victims. That means that the MMF_OOM_SKIP part of the synchronization doesn't work and it can see a task after the whole address space has been demolished and traverse an already released mm->mmap list. This leads to use after free as properly caught up by KASAN report. Fix the issue by reseting mm->mmap so that MMF_OOM_SKIP synchronization is not needed anymore. The MMF_OOM_SKIP is not removed from exit_mmap yet but it acts mostly as an optimization now. [1] 27ae357fa82b ("mm, oom: fix concurrent munlock and oom reaper unmap, v3") [2] 212925802454 ("mm: oom: let oom_reap_task and exit_mmap run concurrently") [mhocko@suse.com: changelog rewrite] Link: https://lore.kernel.org/all/00000000000072ef2c05d7f81950@google.com/ Link: https://lkml.kernel.org/r/20220215201922.1908156-1-surenb@google.com Fixes: 64591e8605d6 ("mm: protect free_pgtables with mmap_lock write lock in exit_mmap") Signed-off-by: Suren Baghdasaryan Reported-by: syzbot+2ccf63a4bd07cf39cab0@syzkaller.appspotmail.com Suggested-by: Michal Hocko Reviewed-by: Rik van Riel Reviewed-by: Yang Shi Acked-by: Michal Hocko Cc: David Rientjes Cc: Matthew Wilcox Cc: Johannes Weiner Cc: Roman Gushchin Cc: Rik van Riel Cc: Minchan Kim Cc: Kirill A. Shutemov Cc: Andrea Arcangeli Cc: Christian Brauner Cc: Christoph Hellwig Cc: Oleg Nesterov Cc: David Hildenbrand Cc: Jann Horn Cc: Shakeel Butt Cc: Andy Lutomirski Cc: Christian Brauner Cc: Florian Weimer Cc: Jan Engelhardt Cc: Tim Murray Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/mmap.c | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/mmap.c b/mm/mmap.c index 1e8fdb0b51eddc..d445c1b9d60650 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -3186,6 +3186,7 @@ void exit_mmap(struct mm_struct *mm) vma = remove_vma(vma); cond_resched(); } + mm->mmap = NULL; mmap_write_unlock(mm); vm_unacct_memory(nr_accounted); } From f39c58008dee7ab5fc94c3f1995a21e886801df0 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Fri, 25 Feb 2022 19:11:08 -0800 Subject: [PATCH 486/493] selftest/vm: fix map_fixed_noreplace test failure On the latest RHEL the test fails due to executable mapped at 256MB address # ./map_fixed_noreplace mmap() @ 0x10000000-0x10050000 p=0xffffffffffffffff result=File exists 10000000-10010000 r-xp 00000000 fd:04 34905657 /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace 10010000-10020000 r--p 00000000 fd:04 34905657 /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace 10020000-10030000 rw-p 00010000 fd:04 34905657 /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace 10029b90000-10029bc0000 rw-p 00000000 00:00 0 [heap] 7fffbb510000-7fffbb750000 r-xp 00000000 fd:04 24534 /usr/lib64/libc.so.6 7fffbb750000-7fffbb760000 r--p 00230000 fd:04 24534 /usr/lib64/libc.so.6 7fffbb760000-7fffbb770000 rw-p 00240000 fd:04 24534 /usr/lib64/libc.so.6 7fffbb780000-7fffbb7a0000 r--p 00000000 00:00 0 [vvar] 7fffbb7a0000-7fffbb7b0000 r-xp 00000000 00:00 0 [vdso] 7fffbb7b0000-7fffbb800000 r-xp 00000000 fd:04 24514 /usr/lib64/ld64.so.2 7fffbb800000-7fffbb810000 r--p 00040000 fd:04 24514 /usr/lib64/ld64.so.2 7fffbb810000-7fffbb820000 rw-p 00050000 fd:04 24514 /usr/lib64/ld64.so.2 7fffd93f0000-7fffd9420000 rw-p 00000000 00:00 0 [stack] Error: couldn't map the space we need for the test Fix this by finding a free address using mmap instead of hardcoding BASE_ADDRESS. Link: https://lkml.kernel.org/r/20220217083417.373823-1-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V Cc: Michael Ellerman Cc: Jann Horn Cc: Shuah Khan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- .../selftests/vm/map_fixed_noreplace.c | 49 ++++++++++++++----- 1 file changed, 37 insertions(+), 12 deletions(-) diff --git a/tools/testing/selftests/vm/map_fixed_noreplace.c b/tools/testing/selftests/vm/map_fixed_noreplace.c index d91bde51126866..eed44322d1a635 100644 --- a/tools/testing/selftests/vm/map_fixed_noreplace.c +++ b/tools/testing/selftests/vm/map_fixed_noreplace.c @@ -17,9 +17,6 @@ #define MAP_FIXED_NOREPLACE 0x100000 #endif -#define BASE_ADDRESS (256ul * 1024 * 1024) - - static void dump_maps(void) { char cmd[32]; @@ -28,18 +25,46 @@ static void dump_maps(void) system(cmd); } +static unsigned long find_base_addr(unsigned long size) +{ + void *addr; + unsigned long flags; + + flags = MAP_PRIVATE | MAP_ANONYMOUS; + addr = mmap(NULL, size, PROT_NONE, flags, -1, 0); + if (addr == MAP_FAILED) { + printf("Error: couldn't map the space we need for the test\n"); + return 0; + } + + if (munmap(addr, size) != 0) { + printf("Error: couldn't map the space we need for the test\n"); + return 0; + } + return (unsigned long)addr; +} + int main(void) { + unsigned long base_addr; unsigned long flags, addr, size, page_size; char *p; page_size = sysconf(_SC_PAGE_SIZE); + //let's find a base addr that is free before we start the tests + size = 5 * page_size; + base_addr = find_base_addr(size); + if (!base_addr) { + printf("Error: couldn't map the space we need for the test\n"); + return 1; + } + flags = MAP_PRIVATE | MAP_ANONYMOUS | MAP_FIXED_NOREPLACE; // Check we can map all the areas we need below errno = 0; - addr = BASE_ADDRESS; + addr = base_addr; size = 5 * page_size; p = mmap((void *)addr, size, PROT_NONE, flags, -1, 0); @@ -60,7 +85,7 @@ int main(void) printf("unmap() successful\n"); errno = 0; - addr = BASE_ADDRESS + page_size; + addr = base_addr + page_size; size = 3 * page_size; p = mmap((void *)addr, size, PROT_NONE, flags, -1, 0); printf("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p); @@ -80,7 +105,7 @@ int main(void) * +4 | free | new */ errno = 0; - addr = BASE_ADDRESS; + addr = base_addr; size = 5 * page_size; p = mmap((void *)addr, size, PROT_NONE, flags, -1, 0); printf("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p); @@ -101,7 +126,7 @@ int main(void) * +4 | free | */ errno = 0; - addr = BASE_ADDRESS + (2 * page_size); + addr = base_addr + (2 * page_size); size = page_size; p = mmap((void *)addr, size, PROT_NONE, flags, -1, 0); printf("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p); @@ -121,7 +146,7 @@ int main(void) * +4 | free | new */ errno = 0; - addr = BASE_ADDRESS + (3 * page_size); + addr = base_addr + (3 * page_size); size = 2 * page_size; p = mmap((void *)addr, size, PROT_NONE, flags, -1, 0); printf("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p); @@ -141,7 +166,7 @@ int main(void) * +4 | free | */ errno = 0; - addr = BASE_ADDRESS; + addr = base_addr; size = 2 * page_size; p = mmap((void *)addr, size, PROT_NONE, flags, -1, 0); printf("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p); @@ -161,7 +186,7 @@ int main(void) * +4 | free | */ errno = 0; - addr = BASE_ADDRESS; + addr = base_addr; size = page_size; p = mmap((void *)addr, size, PROT_NONE, flags, -1, 0); printf("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p); @@ -181,7 +206,7 @@ int main(void) * +4 | free | new */ errno = 0; - addr = BASE_ADDRESS + (4 * page_size); + addr = base_addr + (4 * page_size); size = page_size; p = mmap((void *)addr, size, PROT_NONE, flags, -1, 0); printf("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p); @@ -192,7 +217,7 @@ int main(void) return 1; } - addr = BASE_ADDRESS; + addr = base_addr; size = 5 * page_size; if (munmap((void *)addr, size) != 0) { dump_maps(); From 7d547dcf97f275e9f507c8099e168ed682fe1257 Mon Sep 17 00:00:00 2001 From: Roman Gushchin Date: Fri, 25 Feb 2022 19:11:11 -0800 Subject: [PATCH 487/493] MAINTAINERS: add Roman as a memcg co-maintainer Add myself as a memcg co-maintainer. My primary focus over last few years was the kernel memory accounting stack, but I do work on some other parts of the memory controller as well. Link: https://lkml.kernel.org/r/20220221233951.659048-1-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin Acked-by: Michal Hocko Acked-by: Johannes Weiner Acked-by: Vlastimil Babka Cc: Vladimir Davydov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 71498bb8a1429c..c513c4a91c83d8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4914,6 +4914,7 @@ CONTROL GROUP - MEMORY RESOURCE CONTROLLER (MEMCG) M: Johannes Weiner M: Michal Hocko M: Vladimir Davydov +M: Roman Gushchin L: cgroups@vger.kernel.org L: linux-mm@kvack.org S: Maintained From 0a972e72e2f9630b10bf6b7b5e08312e87eb6854 Mon Sep 17 00:00:00 2001 From: Vladimir Davydov Date: Fri, 25 Feb 2022 19:11:14 -0800 Subject: [PATCH 488/493] MAINTAINERS: remove Vladimir from memcg maintainers Link: https://lkml.kernel.org/r/4ad1f8da49d7b71c84a0c15bd5347f5ce704e730.1645608825.git.vdavydov.dev@gmail.com Signed-off-by: Vladimir Davydov Acked-by: Johannes Weiner Acked-by: Michal Hocko Cc: Roman Gushchin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index c513c4a91c83d8..ade902f0271a15 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4913,7 +4913,6 @@ F: kernel/cgroup/cpuset.c CONTROL GROUP - MEMORY RESOURCE CONTROLLER (MEMCG) M: Johannes Weiner M: Michal Hocko -M: Vladimir Davydov M: Roman Gushchin L: cgroups@vger.kernel.org L: linux-mm@kvack.org From bb9d5454992322a0b793c655e1d860a54a38a3d3 Mon Sep 17 00:00:00 2001 From: Shakeel Butt Date: Fri, 25 Feb 2022 19:11:17 -0800 Subject: [PATCH 489/493] MAINTAINERS: add Shakeel as a memcg co-maintainer I have been contributing and reviewing to the memcg codebase for last couple of years. So, making it official. Link: https://lkml.kernel.org/r/20220224060148.4092228-1-shakeelb@google.com Signed-off-by: Shakeel Butt Acked-by: Roman Gushchin Acked-by: Michal Hocko Cc: Johannes Weiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index ade902f0271a15..ae42c9e2437be9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4914,6 +4914,7 @@ CONTROL GROUP - MEMORY RESOURCE CONTROLLER (MEMCG) M: Johannes Weiner M: Michal Hocko M: Roman Gushchin +M: Shakeel Butt L: cgroups@vger.kernel.org L: linux-mm@kvack.org S: Maintained From 7b0112f3432915fd6ac68ddd61bc4bcd1ac2505d Mon Sep 17 00:00:00 2001 From: Vlastimil Babka Date: Fri, 25 Feb 2022 19:11:20 -0800 Subject: [PATCH 490/493] MAINTAINERS, SLAB: add Roman as reviewer, git tree The slab code has an overlap with kmem accounting, where Roman has done a lot of work recently and it would be useful to make sure he's CC'd on patches that potentially affect it. Thus add him as a reviewer for the SLAB subsystem. Also while at it, add the link to slab git tree. Link: https://lkml.kernel.org/r/20220222103104.13241-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka Acked-by: David Rientjes Acked-by: Roman Gushchin Cc: Christoph Lameter Cc: Pekka Enberg Cc: Joonsoo Kim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index ae42c9e2437be9..1ba1e4af2cbc80 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17762,8 +17762,10 @@ M: David Rientjes M: Joonsoo Kim M: Andrew Morton M: Vlastimil Babka +R: Roman Gushchin L: linux-mm@kvack.org S: Maintained +T: git git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab.git F: include/linux/sl?b*.h F: mm/sl?b* From 9502bdbf34e4ffe865d144fe4218eb64602a75bd Mon Sep 17 00:00:00 2001 From: Roman Gushchin Date: Fri, 25 Feb 2022 19:11:23 -0800 Subject: [PATCH 491/493] mailmap: update Roman Gushchin's email I'm moving to a @linux.dev account. Map my old addresses. Link: https://lkml.kernel.org/r/20220221200006.416377-1-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- .mailmap | 3 +++ 1 file changed, 3 insertions(+) diff --git a/.mailmap b/.mailmap index 8cd44b0c657970..10ee1103c823b3 100644 --- a/.mailmap +++ b/.mailmap @@ -333,6 +333,9 @@ Rémi Denis-Courmont Ricardo Ribalda Ricardo Ribalda Ricardo Ribalda Delgado Ricardo Ribalda +Roman Gushchin +Roman Gushchin +Roman Gushchin Ross Zwisler Rudolf Marek Rui Saraiva From fda153c89af344d21df281009a9d046cf587ea0f Mon Sep 17 00:00:00 2001 From: Mike Kravetz Date: Fri, 25 Feb 2022 19:11:26 -0800 Subject: [PATCH 492/493] selftests/memfd: clean up mapping in mfd_fail_write Running the memfd script ./run_hugetlbfs_test.sh will often end in error as follows: memfd-hugetlb: CREATE memfd-hugetlb: BASIC memfd-hugetlb: SEAL-WRITE memfd-hugetlb: SEAL-FUTURE-WRITE memfd-hugetlb: SEAL-SHRINK fallocate(ALLOC) failed: No space left on device ./run_hugetlbfs_test.sh: line 60: 166855 Aborted (core dumped) ./memfd_test hugetlbfs opening: ./mnt/memfd fuse: DONE If no hugetlb pages have been preallocated, run_hugetlbfs_test.sh will allocate 'just enough' pages to run the test. In the SEAL-FUTURE-WRITE test the mfd_fail_write routine maps the file, but does not unmap. As a result, two hugetlb pages remain reserved for the mapping. When the fallocate call in the SEAL-SHRINK test attempts allocate all hugetlb pages, it is short by the two reserved pages. Fix by making sure to unmap in mfd_fail_write. Link: https://lkml.kernel.org/r/20220219004340.56478-1-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz Cc: Joel Fernandes Cc: Shuah Khan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- tools/testing/selftests/memfd/memfd_test.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/memfd/memfd_test.c b/tools/testing/selftests/memfd/memfd_test.c index 192a2899bae8fc..94df2692e6e4a7 100644 --- a/tools/testing/selftests/memfd/memfd_test.c +++ b/tools/testing/selftests/memfd/memfd_test.c @@ -455,6 +455,7 @@ static void mfd_fail_write(int fd) printf("mmap()+mprotect() didn't fail as expected\n"); abort(); } + munmap(p, mfd_def_size); } /* verify PUNCH_HOLE fails */ From 7e57714cd0ad2d5bb90e50b5096a0e671dec1ef3 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 27 Feb 2022 14:36:33 -0800 Subject: [PATCH 493/493] Linux 5.17-rc6 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 289ce2be8032a4..daeb5c88b50bfa 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 5 PATCHLEVEL = 17 SUBLEVEL = 0 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Superb Owl # *DOCUMENTATION*